Linux 3.19-rc6

-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUxbzlAAoJEHm+PkMAQRiGtqYIAJ8YlKX9cXKYmXx8/FncINH+
 2erj94KyHG080R1uwSq1+7zXWCZUUlxiJnDnsup5rG0dImcicqgOE48oHax1aN6b
 yHfPONkTjNJ1HYepuGC3YWCG9wIjPZQ5S8KHrwRjyVoE+ddhe9gWgvArA3jl/fW/
 2fYNWekoRoMcRiNb4/w2weyOOBywdSVpmj0WYiwdztysG2ymw5hUXRHJhvSf1AFm
 RQJfUHkhCOYpQGY7XFba/1uGhTJfOgDmYAfspAOLzmrXE/DJcCutsVdBZO+12fAL
 nhGpM/PkRYxMvwzDKIUoG35qsymYOMqo54oXhr0S2JjyXTGdGmB6qHxIfqnV5Tk=
 =O/Lr
 -----END PGP SIGNATURE-----

Merge tag 'v3.19-rc6' into devel

Linux 3.19-rc6
This commit is contained in:
Linus Walleij 2015-01-30 10:38:15 +01:00
commit b6afdbe8e8
838 changed files with 8658 additions and 6591 deletions

View File

@ -51,6 +51,7 @@ Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman <greg@kroah.com>
Henk Vergonet <Henk.Vergonet@gmail.com>
Henrik Kretzschmar <henne@nachtwindheim.de>
Henrik Rydberg <rydberg@bitmath.org>
Herbert Xu <herbert@gondor.apana.org.au>
Jacob Shin <Jacob.Shin@amd.com>
James Bottomley <jejb@mulgrave.(none)>

View File

@ -14,3 +14,18 @@ Description:
The /sys/class/mei/meiN directory is created for
each probed mei device
What: /sys/class/mei/meiN/fw_status
Date: Nov 2014
KernelVersion: 3.19
Contact: Tomas Winkler <tomas.winkler@intel.com>
Description: Display fw status registers content
The ME FW writes its status information into fw status
registers for BIOS and OS to monitor fw health.
The register contains running state, power management
state, error codes, and others. The way the registers
are decoded depends on PCH or SoC generation.
Also number of registers varies between 1 and 6
depending on generation.

View File

@ -1,60 +0,0 @@
What: /sys/class/leds/dell::kbd_backlight/als_setting
Date: December 2014
KernelVersion: 3.19
Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
Pali Rohár <pali.rohar@gmail.com>
Description:
This file allows to control the automatic keyboard
illumination mode on some systems that have an ambient
light sensor. Write 1 to this file to enable the auto
mode, 0 to disable it.
What: /sys/class/leds/dell::kbd_backlight/start_triggers
Date: December 2014
KernelVersion: 3.19
Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
Pali Rohár <pali.rohar@gmail.com>
Description:
This file allows to control the input triggers that
turn on the keyboard backlight illumination that is
disabled because of inactivity.
Read the file to see the triggers available. The ones
enabled are preceded by '+', those disabled by '-'.
To enable a trigger, write its name preceded by '+' to
this file. To disable a trigger, write its name preceded
by '-' instead.
For example, to enable the keyboard as trigger run:
echo +keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
To disable it:
echo -keyboard > /sys/class/leds/dell::kbd_backlight/start_triggers
Note that not all the available triggers can be configured.
What: /sys/class/leds/dell::kbd_backlight/stop_timeout
Date: December 2014
KernelVersion: 3.19
Contact: Gabriele Mazzotta <gabriele.mzt@gmail.com>,
Pali Rohár <pali.rohar@gmail.com>
Description:
This file allows to specify the interval after which the
keyboard illumination is disabled because of inactivity.
The timeouts are expressed in seconds, minutes, hours and
days, for which the symbols are 's', 'm', 'h' and 'd'
respectively.
To configure the timeout, write to this file a value along
with any the above units. If no unit is specified, the value
is assumed to be expressed in seconds.
For example, to set the timeout to 10 minutes run:
echo 10m > /sys/class/leds/dell::kbd_backlight/stop_timeout
Note that when this file is read, the returned value might be
expressed in a different unit than the one used when the timeout
was set.
Also note that only some timeouts are supported and that
some systems might fall back to a specific timeout in case
an invalid timeout is written to this file.

View File

@ -23,7 +23,7 @@ Required nodes:
range of 0x200 bytes.
- syscon: the root node of the Integrator platforms must have a
system controller node pointong to the control registers,
system controller node pointing to the control registers,
with the compatible string
"arm,integrator-ap-syscon"
"arm,integrator-cp-syscon"

View File

@ -0,0 +1,72 @@
* QEMU Firmware Configuration bindings for ARM
QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
provide the following Firmware Configuration interface on the "virt" machine
type:
- A write-only, 16-bit wide selector (or control) register,
- a read-write, 64-bit wide data register.
QEMU exposes the control and data register to ARM guests as memory mapped
registers; their location is communicated to the guest's UEFI firmware in the
DTB that QEMU places at the bottom of the guest's DRAM.
The guest writes a selector value (a key) to the selector register, and then
can read the corresponding data (produced by QEMU) via the data register. If
the selected entry is writable, the guest can rewrite it through the data
register.
The selector register takes keys in big endian byte order.
The data register allows accesses with 8, 16, 32 and 64-bit width (only at
offset 0 of the register). Accesses larger than a byte are interpreted as
arrays, bundled together only for better performance. The bytes constituting
such a word, in increasing address order, correspond to the bytes that would
have been transferred by byte-wide accesses in chronological order.
The interface allows guest firmware to download various parameters and blobs
that affect how the firmware works and what tables it installs for the guest
OS. For example, boot order of devices, ACPI tables, SMBIOS tables, kernel and
initrd images for direct kernel booting, virtual machine UUID, SMP information,
virtual NUMA topology, and so on.
The authoritative registry of the valid selector values and their meanings is
the QEMU source code; the structure of the data blobs corresponding to the
individual key values is also defined in the QEMU source code.
The presence of the registers can be verified by selecting the "signature" blob
with key 0x0000, and reading four bytes from the data register. The returned
signature is "QEMU".
The outermost protocol (involving the write / read sequences of the control and
data registers) is expected to be versioned, and/or described by feature bits.
The interface revision / feature bitmap can be retrieved with key 0x0001. The
blob to be read from the data register has size 4, and it is to be interpreted
as a uint32_t value in little endian byte order. The current value
(corresponding to the above outer protocol) is zero.
The guest kernel is not expected to use these registers (although it is
certainly allowed to); the device tree bindings are documented here because
this is where device tree bindings reside in general.
Required properties:
- compatible: "qemu,fw-cfg-mmio".
- reg: the MMIO region used by the device.
* Bytes 0x0 to 0x7 cover the data register.
* Bytes 0x8 to 0x9 cover the selector register.
* Further registers may be appended to the region in case of future interface
revisions / feature bits.
Example:
/ {
#size-cells = <0x2>;
#address-cells = <0x2>;
fw-cfg@9020000 {
compatible = "qemu,fw-cfg-mmio";
reg = <0x0 0x9020000 0x0 0xa>;
};
};

View File

@ -19,7 +19,7 @@ type of the connections, they just map their existence. Specific properties
may be described by specialized bindings depending on the type of connection.
To see how this binding applies to video pipelines, for example, see
Documentation/device-tree/bindings/media/video-interfaces.txt.
Documentation/devicetree/bindings/media/video-interfaces.txt.
Here the ports describe data interfaces, and the links between them are
the connecting data buses. A single port with multiple connections can
correspond to multiple devices being connected to the same physical bus.

View File

@ -10,12 +10,13 @@ Optional properties:
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input.
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
Required mutual exclusive subnode-properties:
- gpios: OF device-tree gpio specification.
- interrupts: the interrupt line for that input
Note that either "interrupts" or "gpios" properties can be omitted, but not
both at the same time. Specifying both properties is allowed.
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
@ -23,6 +24,9 @@ Optional subnode-properties:
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- gpio-key,wakeup: Boolean, button can wake-up the system.
- linux,can-disable: Boolean, indicates that button is connected
to dedicated (not shared) interrupt which can be disabled to
suppress events from the button.
Example nodes:

View File

@ -8,6 +8,8 @@ Optional properties:
- debounce-interval : Debouncing interval time in milliseconds
- st,scan-count : Scanning cycles elapsed before key data is updated
- st,no-autorepeat : If specified device will not autorepeat
- keypad,num-rows : See ./matrix-keymap.txt
- keypad,num-columns : See ./matrix-keymap.txt
Example:

View File

@ -4,7 +4,8 @@ This file provides information, what the device node
for the davinci_emac interface contains.
Required properties:
- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
"ti,dm816-emac"
- reg: Offset and length of the register set for the device
- ti,davinci-ctrl-reg-offset: offset to control register
- ti,davinci-ctrl-mod-reg-offset: offset to control module register

View File

@ -9,7 +9,6 @@ ad Avionic Design GmbH
adapteva Adapteva, Inc.
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
allwinner Allwinner Technology Co., Ltd.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
@ -20,6 +19,7 @@ amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
armadeus ARMadeus Systems SARL
asahi-kasei Asahi Kasei Corp.
atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
@ -127,6 +127,7 @@ pixcir PIXCIR MICROELECTRONICS Co., Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
qemu QEMU, a generic and open source machine emulator and virtualizer
qnap QNAP Systems, Inc.
radxa Radxa
raidsonic RaidSonic Technology GmbH
@ -168,6 +169,7 @@ usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
variscite Variscite Ltd.
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
voipac Voipac Technologies s.r.o.
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics

View File

@ -1277,6 +1277,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
i8042.notimeout [HW] Ignore timeout condition signalled by controller
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
i8042.kbdreset [HW] Reset device connected to KBD port
i810= [HW,DRM]

View File

@ -66,6 +66,8 @@ fwmark_reflect - BOOLEAN
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
From linux kernel 3.6 onwards, this is deprecated for ipv4
as route cache is no longer used.
neigh/default/gc_thresh1 - INTEGER
Minimum number of entries to keep. Garbage collector will not

View File

@ -389,9 +389,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .release_cmd = " + fabric_mod_name + "_release_cmd,\n"
buf += " .shutdown_session = " + fabric_mod_name + "_shutdown_session,\n"
buf += " .close_session = " + fabric_mod_name + "_close_session,\n"
buf += " .stop_session = " + fabric_mod_name + "_stop_session,\n"
buf += " .fall_back_to_erl0 = " + fabric_mod_name + "_reset_nexus,\n"
buf += " .sess_logged_in = " + fabric_mod_name + "_sess_logged_in,\n"
buf += " .sess_get_index = " + fabric_mod_name + "_sess_get_index,\n"
buf += " .sess_get_initiator_sid = NULL,\n"
buf += " .write_pending = " + fabric_mod_name + "_write_pending,\n"
@ -402,7 +399,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n"
buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n"
buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n"
buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n"
buf += " .aborted_task = " + fabric_mod_name + "_aborted_task,\n"
buf += " /*\n"
buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
buf += " */\n"
@ -428,7 +425,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " /*\n"
buf += " * Register the top level struct config_item_type with TCM core\n"
buf += " */\n"
buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name + "\");\n"
buf += " if (IS_ERR(fabric)) {\n"
buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
buf += " return PTR_ERR(fabric);\n"
@ -595,7 +592,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
if re.search('get_fabric_name', fo):
buf += "char *" + fabric_mod_name + "_get_fabric_name(void)\n"
buf += "{\n"
buf += " return \"" + fabric_mod_name[4:] + "\";\n"
buf += " return \"" + fabric_mod_name + "\";\n"
buf += "}\n\n"
bufi += "char *" + fabric_mod_name + "_get_fabric_name(void);\n"
continue
@ -820,27 +817,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_close_session(struct se_session *);\n"
if re.search('stop_session\)\(', fo):
buf += "void " + fabric_mod_name + "_stop_session(struct se_session *se_sess, int sess_sleep , int conn_sleep)\n"
buf += "{\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_stop_session(struct se_session *, int, int);\n"
if re.search('fall_back_to_erl0\)\(', fo):
buf += "void " + fabric_mod_name + "_reset_nexus(struct se_session *se_sess)\n"
buf += "{\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "void " + fabric_mod_name + "_reset_nexus(struct se_session *);\n"
if re.search('sess_logged_in\)\(', fo):
buf += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *se_sess)\n"
buf += "{\n"
buf += " return 0;\n"
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_sess_logged_in(struct se_session *);\n"
if re.search('sess_get_index\)\(', fo):
buf += "u32 " + fabric_mod_name + "_sess_get_index(struct se_session *se_sess)\n"
buf += "{\n"
@ -898,19 +874,18 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
bufi += "int " + fabric_mod_name + "_queue_status(struct se_cmd *);\n"
if re.search('queue_tm_rsp\)\(', fo):
buf += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
buf += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *se_cmd)\n"
buf += "{\n"
buf += " return 0;\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
bufi += "void " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n"
if re.search('is_state_remove\)\(', fo):
buf += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *se_cmd)\n"
if re.search('aborted_task\)\(', fo):
buf += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *se_cmd)\n"
buf += "{\n"
buf += " return 0;\n"
buf += " return;\n"
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
bufi += "void " + fabric_mod_name + "_aborted_task(struct se_cmd *);\n"
ret = p.write(buf)
if ret:
@ -1018,11 +993,11 @@ def main(modname, proto_ident):
tcm_mod_build_kbuild(fabric_mod_dir, fabric_mod_name)
tcm_mod_build_kconfig(fabric_mod_dir, fabric_mod_name)
input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Makefile..? [yes,no]: ")
input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Makefile..? [yes,no]: ")
if input == "yes" or input == "y":
tcm_mod_add_kbuild(tcm_dir, fabric_mod_name)
input = raw_input("Would you like to add " + fabric_mod_name + "to drivers/target/Kconfig..? [yes,no]: ")
input = raw_input("Would you like to add " + fabric_mod_name + " to drivers/target/Kconfig..? [yes,no]: ")
if input == "yes" or input == "y":
tcm_mod_add_kconfig(tcm_dir, fabric_mod_name)

View File

@ -3,7 +3,7 @@ CPU cooling APIs How To
Written by Amit Daniel Kachhap <amit.kachhap@linaro.org>
Updated: 12 May 2012
Updated: 6 Jan 2015
Copyright (c) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
@ -25,7 +25,18 @@ the user. The registration APIs returns the cooling device pointer.
clip_cpus: cpumask of cpus where the frequency constraints will happen.
1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
1.1.2 struct thermal_cooling_device *of_cpufreq_cooling_register(
struct device_node *np, const struct cpumask *clip_cpus)
This interface function registers the cpufreq cooling device with
the name "thermal-cpufreq-%x" linking it with a device tree node, in
order to bind it via the thermal DT code. This api can support multiple
instances of cpufreq cooling devices.
np: pointer to the cooling device device tree node
clip_cpus: cpumask of cpus where the frequency constraints will happen.
1.1.3 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
This interface function unregisters the "thermal-cpufreq-%x" cooling device.

View File

@ -696,7 +696,7 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://blackfin.uclinux.org/
S: Supported
F: sound/soc/blackfin/*
ANALOG DEVICES INC IIO DRIVERS
M: Lars-Peter Clausen <lars@metafoo.de>
M: Michael Hennerich <Michael.Hennerich@analog.com>
@ -724,15 +724,15 @@ F: include/uapi/linux/apm_bios.h
F: drivers/char/apm-emulation.c
APPLE BCM5974 MULTITOUCH DRIVER
M: Henrik Rydberg <rydberg@euromail.se>
M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
S: Maintained
S: Odd fixes
F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
M: Henrik Rydberg <rydberg@euromail.se>
M: Henrik Rydberg <rydberg@bitmath.org>
L: lm-sensors@lm-sensors.org
S: Maintained
S: Odd fixes
F: drivers/hwmon/applesmc.c
APPLETALK NETWORK LAYER
@ -754,13 +754,6 @@ L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/i2c/aptina-pll.*
ARASAN COMPACT FLASH PATA CONTROLLER
M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/ata/pata_arasan_cf.c
ARC FRAMEBUFFER DRIVER
M: Jaya Kumar <jayalk@intworks.biz>
S: Maintained
@ -2259,6 +2252,7 @@ F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <clm@fb.com>
M: Josef Bacik <jbacik@fb.com>
M: David Sterba <dsterba@suse.cz>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
@ -2345,7 +2339,8 @@ CAN NETWORK LAYER
M: Oliver Hartkopp <socketcan@hartkopp.net>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
T: git git://gitorious.org/linux-can/linux-can-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
F: Documentation/networking/can.txt
F: net/can/
@ -2360,7 +2355,8 @@ M: Wolfgang Grandegger <wg@grandegger.com>
M: Marc Kleine-Budde <mkl@pengutronix.de>
L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
T: git git://gitorious.org/linux-can/linux-can-next.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
S: Maintained
F: drivers/net/can/
F: include/linux/can/dev.h
@ -3182,7 +3178,7 @@ L: dmaengine@vger.kernel.org
Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
S: Maintained
F: drivers/dma/
F: include/linux/dma*
F: include/linux/dmaengine.h
F: Documentation/dmaengine/
T: git git://git.infradead.org/users/vkoul/slave-dma.git
@ -4748,20 +4744,20 @@ S: Supported
F: drivers/scsi/ipr.*
IBM Power Virtual Ethernet Device Driver
M: Santiago Leon <santil@linux.vnet.ibm.com>
M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/ibm/ibmveth.*
IBM Power Virtual SCSI Device Drivers
M: Nathan Fontenot <nfont@linux.vnet.ibm.com>
M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/ibmvscsi/ibmvscsi*
F: drivers/scsi/ibmvscsi/viosrp.h
IBM Power Virtual FC Device Drivers
M: Brian King <brking@linux.vnet.ibm.com>
M: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/ibmvscsi/ibmvfc*
@ -4929,7 +4925,6 @@ F: include/uapi/linux/inotify.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
M: Dmitry Torokhov <dmitry.torokhov@gmail.com>
M: Dmitry Torokhov <dtor@mail.ru>
L: linux-input@vger.kernel.org
Q: http://patchwork.kernel.org/project/linux-input/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
@ -4940,10 +4935,10 @@ F: include/uapi/linux/input.h
F: include/linux/input/
INPUT MULTITOUCH (MT) PROTOCOL
M: Henrik Rydberg <rydberg@euromail.se>
M: Henrik Rydberg <rydberg@bitmath.org>
L: linux-input@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
S: Maintained
S: Odd fixes
F: Documentation/input/multi-touch-protocol.txt
F: drivers/input/input-mt.c
K: \b(ABS|SYN)_MT_
@ -4951,7 +4946,6 @@ K: \b(ABS|SYN)_MT_
INTEL C600 SERIES SAS CONTROLLER DRIVER
M: Intel SCU Linux support <intel-linux-scu@intel.com>
M: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
M: Dave Jiang <dave.jiang@intel.com>
L: linux-scsi@vger.kernel.org
T: git git://git.code.sf.net/p/intel-sas/isci
S: Supported
@ -5279,6 +5273,15 @@ W: www.open-iscsi.org
Q: http://patchwork.kernel.org/project/linux-rdma/list/
F: drivers/infiniband/ulp/iser/
ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
M: Sagi Grimberg <sagig@mellanox.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
L: linux-rdma@vger.kernel.org
L: target-devel@vger.kernel.org
S: Supported
W: http://www.linux-iscsi.org
F: drivers/infiniband/ulp/isert
ISDN SUBSYSTEM
M: Karsten Keil <isdn@linux-pingi.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
@ -5693,6 +5696,49 @@ F: drivers/lguest/
F: include/linux/lguest*.h
F: tools/lguest/
LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
LIBATA PATA ARASAN COMPACT FLASH CONTROLLER
M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/ata/pata_arasan_cf.c
LIBATA PATA DRIVERS
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/pata_*.c
F: drivers/ata/ata_generic.c
LIBATA SATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
LIBATA SATA PROMISE TX2/TX4 CONTROLLER DRIVER
M: Mikael Pettersson <mikpelinux@gmail.com>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Maintained
F: drivers/ata/sata_promise.*
LIBLOCKDEP
M: Sasha Levin <sasha.levin@oracle.com>
S: Maintained
@ -6977,14 +7023,12 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Grant Likely <grant.likely@linaro.org>
M: Rob Herring <robh+dt@kernel.org>
L: devicetree@vger.kernel.org
W: http://fdt.secretlab.ca
T: git git://git.secretlab.ca/git/linux-2.6.git
W: http://www.devicetree.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux.git
S: Maintained
F: drivers/of/
F: include/linux/of*.h
F: scripts/dtc/
K: of_get_property
K: of_match_table
OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <robh+dt@kernel.org>
@ -7229,7 +7273,7 @@ S: Maintained
F: drivers/pci/host/*layerscape*
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Richard Zhu <Richard.Zhu@freescale.com>
M: Lucas Stach <l.stach@pengutronix.de>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -7399,6 +7443,7 @@ F: drivers/crypto/picoxcell*
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
@ -7566,12 +7611,6 @@ W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete
F: drivers/net/wireless/prism54/
PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
M: Mikael Pettersson <mikpelinux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
@ -7737,8 +7776,7 @@ F: Documentation/scsi/LICENSE.qla2xxx
F: drivers/scsi/qla2xxx/
QLOGIC QLA4XXX iSCSI DRIVER
M: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
M: iscsi-driver@qlogic.com
M: QLogic-Storage-Upstream@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/LICENSE.qla4xxx
@ -8546,25 +8584,6 @@ S: Maintained
F: drivers/misc/phantom.c
F: include/uapi/linux/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
SERIAL ATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org
@ -9533,7 +9552,8 @@ F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <edubezval@gmail.com>
L: linux-pm@vger.kernel.org
S: Supported
L: linux-omap@vger.kernel.org
S: Maintained
F: drivers/thermal/ti-soc-thermal/
TI CLOCK DRIVER

View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 19
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc6
NAME = Diseased Newt
# *DOCUMENTATION*
@ -391,6 +391,7 @@ USERINCLUDE := \
# Needed to be compatible with the O= option
LINUXINCLUDE := \
-I$(srctree)/arch/$(hdr-arch)/include \
-Iarch/$(hdr-arch)/include/generated/uapi \
-Iarch/$(hdr-arch)/include/generated \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
-Iinclude \

View File

@ -285,8 +285,12 @@ pcibios_claim_one_bus(struct pci_bus *b)
if (r->parent || !r->start || !r->flags)
continue;
if (pci_has_flag(PCI_PROBE_ONLY) ||
(r->flags & IORESOURCE_PCI_FIXED))
pci_claim_resource(dev, i);
(r->flags & IORESOURCE_PCI_FIXED)) {
if (pci_claim_resource(dev, i) == 0)
continue;
pci_claim_bridge_resource(dev, i);
}
}
}

View File

@ -203,27 +203,3 @@
compatible = "linux,spdif-dir";
};
};
&pinctrl {
/*
* These pins might be muxed as I2S by
* the bootloader, but it conflicts
* with the real I2S pins that are
* muxed using i2s_pins. We must mux
* those pins to a function other than
* I2S.
*/
pinctrl-0 = <&hog_pins1 &hog_pins2>;
pinctrl-names = "default";
hog_pins1: hog-pins1 {
marvell,pins = "mpp6", "mpp8", "mpp10",
"mpp12", "mpp13";
marvell,function = "gpio";
};
hog_pins2: hog-pins2 {
marvell,pins = "mpp5", "mpp7", "mpp9";
marvell,function = "gpo";
};
};

View File

@ -953,6 +953,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
clocks = <&lcd_clk>, <&lcd_clk>;
clock-names = "lcdc_clk", "hclk";
status = "disabled";
};

View File

@ -65,6 +65,8 @@
};
&sdhci2 {
broken-cd;
bus-width = <8>;
non-removable;
status = "okay";
};

View File

@ -83,7 +83,8 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&chip CLKID_SDIO1XIN>;
clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
clock-names = "io", "core";
status = "disabled";
};
@ -348,36 +349,6 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
gpio4: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
porte: gpio-port@4 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
};
gpio5: gpio@c000 {
compatible = "snps,dw-apb-gpio";
reg = <0xc000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
portf: gpio-port@5 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
};
};
chip: chip-control@ea0000 {
@ -466,6 +437,21 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
sm_gpio1: gpio@5000 {
compatible = "snps,dw-apb-gpio";
reg = <0x5000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
portf: gpio-port@5 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
};
i2c2: i2c@7000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
@ -516,6 +502,21 @@
status = "disabled";
};
sm_gpio0: gpio@c000 {
compatible = "snps,dw-apb-gpio";
reg = <0xc000 0x400>;
#address-cells = <1>;
#size-cells = <0>;
porte: gpio-port@4 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
snps,nr-gpios = <32>;
reg = <0>;
};
};
sysctrl: pin-controller@d000 {
compatible = "marvell,berlin2q-system-ctrl";
reg = <0xd000 0x100>;

View File

@ -499,23 +499,23 @@
};
partition@5 {
label = "QSPI.u-boot-spl-os";
reg = <0x00140000 0x00010000>;
reg = <0x00140000 0x00080000>;
};
partition@6 {
label = "QSPI.u-boot-env";
reg = <0x00150000 0x00010000>;
reg = <0x001c0000 0x00010000>;
};
partition@7 {
label = "QSPI.u-boot-env.backup1";
reg = <0x00160000 0x0010000>;
reg = <0x001d0000 0x0010000>;
};
partition@8 {
label = "QSPI.kernel";
reg = <0x00170000 0x0800000>;
reg = <0x001e0000 0x0800000>;
};
partition@9 {
label = "QSPI.file-system";
reg = <0x00970000 0x01690000>;
reg = <0x009e0000 0x01620000>;
};
};
};

View File

@ -1257,6 +1257,8 @@
tx-fifo-resize;
maximum-speed = "super-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
};
};
@ -1278,6 +1280,8 @@
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
};
};
@ -1299,6 +1303,8 @@
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
snps,dis_u2_susphy_quirk;
};
};

View File

@ -736,7 +736,7 @@
dp_phy: video-phy@10040720 {
compatible = "samsung,exynos5250-dp-video-phy";
reg = <0x10040720 4>;
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};

View File

@ -372,3 +372,7 @@
&usbdrd_dwc3_1 {
dr_mode = "host";
};
&cci {
status = "disabled";
};

View File

@ -120,7 +120,7 @@
};
};
cci@10d20000 {
cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
@ -503,8 +503,8 @@
};
dp_phy: video-phy@10040728 {
compatible = "samsung,exynos5250-dp-video-phy";
reg = <0x10040728 4>;
compatible = "samsung,exynos5420-dp-video-phy";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};

View File

@ -162,7 +162,7 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x43fa4000 0x4000>;
clocks = <&clks 62>, <&clks 62>;
clocks = <&clks 78>, <&clks 78>;
clock-names = "ipg", "per";
interrupts = <14>;
status = "disabled";
@ -369,7 +369,7 @@
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fa0000 0x4000>;
clocks = <&clks 106>, <&clks 36>;
clocks = <&clks 106>, <&clks 52>;
clock-names = "ipg", "per";
interrupts = <36>;
};
@ -388,7 +388,7 @@
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fa8000 0x4000>;
clocks = <&clks 107>, <&clks 36>;
clocks = <&clks 107>, <&clks 52>;
clock-names = "ipg", "per";
interrupts = <41>;
};
@ -429,7 +429,7 @@
pwm4: pwm@53fc8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
reg = <0x53fc8000 0x4000>;
clocks = <&clks 108>, <&clks 36>;
clocks = <&clks 108>, <&clks 52>;
clock-names = "ipg", "per";
interrupts = <42>;
};
@ -476,7 +476,7 @@
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
#pwm-cells = <2>;
reg = <0x53fe0000 0x4000>;
clocks = <&clks 105>, <&clks 36>;
clocks = <&clks 105>, <&clks 52>;
clock-names = "ipg", "per";
interrupts = <26>;
};

View File

@ -127,24 +127,12 @@
#address-cells = <1>;
#size-cells = <0>;
reg_usbh1_vbus: regulator@0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1reg>;
reg = <0>;
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg_vbus: regulator@1 {
reg_hub_reset: regulator@0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgreg>;
reg = <1>;
regulator-name = "usbotg_vbus";
reg = <0>;
regulator-name = "hub_reset";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
@ -176,6 +164,7 @@
reg = <0>;
clocks = <&clks IMX5_CLK_DUMMY>;
clock-names = "main_clk";
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
};
};
};
@ -419,7 +408,7 @@
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
vbus-supply = <&reg_usbh1_vbus>;
vbus-supply = <&reg_hub_reset>;
fsl,usbphy = <&usbh1phy>;
phy_type = "ulpi";
status = "okay";
@ -429,7 +418,6 @@
dr_mode = "otg";
disable-over-current;
phy_type = "utmi_wide";
vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};

View File

@ -335,8 +335,8 @@
vpu: vpu@02040000 {
compatible = "cnm,coda960";
reg = <0x02040000 0x3c000>;
interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
<0 12 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
<0 3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bit", "jpeg";
clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
<&clks IMX6QDL_CLK_MMDC_CH0_AXI>,

View File

@ -159,13 +159,28 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-supply = <&reg_enet_3v3>;
phy-mode = "rgmii";
phy-handle = <&ethphy1>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@0 {
reg = <0>;
};
ethphy2: ethernet-phy@1 {
reg = <1>;
};
};
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
phy-handle = <&ethphy2>;
status = "okay";
};

View File

@ -142,6 +142,7 @@
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
};
clockgen: clocking@1ee1000 {

View File

@ -700,11 +700,9 @@
};
};
/* Ethernet is on some early development boards and qemu */
ethernet@gpmc {
compatible = "smsc,lan91c94";
status = "disabled";
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */

View File

@ -155,6 +155,15 @@
};
&pinctrl {
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
drive-strength = <8>;
};
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
bias-pull-up;
drive-strength = <8>;
};
backlight {
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
@ -173,6 +182,27 @@
};
};
sdmmc {
/*
* Default drive strength isn't enough to achieve even
* high-speed mode on EVB board so bump up to 8ma.
*/
sdmmc_bus4: sdmmc-bus4 {
rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
};
sdmmc_clk: sdmmc-clk {
rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
};
sdmmc_cmd: sdmmc-cmd {
rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;

View File

@ -176,7 +176,7 @@
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
"MICBIAS", "IN1L",
"Mic", "MICBIAS",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;

View File

@ -1008,7 +1008,7 @@
pit: timer@fc068630 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfc068630 0xf>;
reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>;
};

View File

@ -25,11 +25,11 @@
stmpe2401_1 {
stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
nhk_cfg1 {
ste,pins = "GPIO76_B20"; // IRQ line
pins = "GPIO76_B20"; // IRQ line
ste,input = <0>;
};
nhk_cfg2 {
ste,pins = "GPIO77_B8"; // reset line
pins = "GPIO77_B8"; // reset line
ste,output = <1>;
};
};
@ -37,11 +37,11 @@
stmpe2401_2 {
stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
nhk_cfg1 {
ste,pins = "GPIO78_A8"; // IRQ line
pins = "GPIO78_A8"; // IRQ line
ste,input = <0>;
};
nhk_cfg2 {
ste,pins = "GPIO79_C9"; // reset line
pins = "GPIO79_C9"; // reset line
ste,output = <1>;
};
};

View File

@ -406,7 +406,7 @@
clock-frequency = <400000>;
magnetometer@c {
compatible = "ak,ak8975";
compatible = "asahi-kasei,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;

View File

@ -129,13 +129,28 @@
&fec0 {
phy-mode = "rmii";
phy-handle = <&ethphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
};
};
&fec1 {
phy-mode = "rmii";
phy-handle = <&ethphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";

View File

@ -84,7 +84,8 @@ CONFIG_DEBUG_GPIO=y
CONFIG_POWER_SUPPLY=y
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_TPS65090=y
# CONFIG_HWMON is not set
CONFIG_HWMON=y
CONFIG_SENSORS_LM90=y
CONFIG_THERMAL=y
CONFIG_EXYNOS_THERMAL=y
CONFIG_EXYNOS_THERMAL_CORE=y
@ -109,11 +110,26 @@ CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS65090=y
CONFIG_DRM=y
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PTN3460=y
CONFIG_DRM_PS8622=y
CONFIG_DRM_EXYNOS=y
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS_DP=y
CONFIG_DRM_PANEL=y
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_7x14=y

View File

@ -338,6 +338,7 @@ CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y

View File

@ -68,7 +68,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_GENERIC_CPUFREQ_CPU0=y
CONFIG_CPUFREQ_DT=y
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_BINFMT_MISC=y

View File

@ -413,6 +413,7 @@
#define __NR_getrandom (__NR_SYSCALL_BASE+384)
#define __NR_memfd_create (__NR_SYSCALL_BASE+385)
#define __NR_bpf (__NR_SYSCALL_BASE+386)
#define __NR_execveat (__NR_SYSCALL_BASE+387)
/*
* The following SWIs are ARM private.

View File

@ -396,6 +396,7 @@
CALL(sys_getrandom)
/* 385 */ CALL(sys_memfd_create)
CALL(sys_bpf)
CALL(sys_execveat)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

View File

@ -253,21 +253,22 @@
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
mov r2, sp
ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr
ldr lr, [r2, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
@ We must avoid clrex due to Cortex-A15 erratum #830321
strex r1, r2, [sp] @ clear the exclusive monitor
strex r1, r2, [r2] @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
ldmdb r2, {r1 - lr}^ @ get calling r1 - lr
.else
ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
ldmdb r2, {r0 - lr}^ @ get calling r0 - lr
.endif
mov r0, r0 @ ARMv5T and earlier require a nop
@ after ldm {}^
add sp, sp, #S_FRAME_SIZE - S_PC
add sp, sp, #\offset + S_FRAME_SIZE
movs pc, lr @ return & move spsr_svc into cpsr
.endm

View File

@ -116,8 +116,14 @@ int armpmu_event_set_period(struct perf_event *event)
ret = 1;
}
if (left > (s64)armpmu->max_period)
left = armpmu->max_period;
/*
* Limit the maximum period to prevent the counter value
* from overtaking the one we are about to program. In
* effect we are reducing max_period to account for
* interrupt latency (and we are being very conservative).
*/
if (left > (armpmu->max_period >> 1))
left = armpmu->max_period >> 1;
local64_set(&hwc->prev_count, (u64)-left);

View File

@ -28,3 +28,11 @@ u64 perf_reg_abi(struct task_struct *task)
{
return PERF_SAMPLE_REGS_ABI_32;
}
void perf_get_regs_user(struct perf_regs *regs_user,
struct pt_regs *regs,
struct pt_regs *regs_user_copy)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
}

View File

@ -657,10 +657,13 @@ int __init arm_add_memory(u64 start, u64 size)
/*
* Ensure that start/size are aligned to a page boundary.
* Size is appropriately rounded down, start is rounded up.
* Size is rounded down, start is rounded up.
*/
size -= start & ~PAGE_MASK;
aligned_start = PAGE_ALIGN(start);
if (aligned_start > start + size)
size = 0;
else
size -= aligned_start - start;
#ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT
if (aligned_start > ULONG_MAX) {
@ -1046,6 +1049,15 @@ static int c_show(struct seq_file *m, void *v)
seq_printf(m, "model name\t: %s rev %d (%s)\n",
cpu_name, cpuid & 15, elf_platform);
#if defined(CONFIG_SMP)
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
(per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
#else
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
loops_per_jiffy / (500000/HZ),
(loops_per_jiffy / (5000/HZ)) % 100);
#endif
/* dump out the processor features */
seq_puts(m, "Features\t: ");

View File

@ -387,6 +387,18 @@ asmlinkage void secondary_start_kernel(void)
void __init smp_cpus_done(unsigned int max_cpus)
{
int cpu;
unsigned long bogosum = 0;
for_each_online_cpu(cpu)
bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
printk(KERN_INFO "SMP: Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
num_online_cpus(),
bogosum / (500000/HZ),
(bogosum / (5000/HZ)) % 100);
hyp_mode_check();
}

View File

@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
#include <linux/phy.h>
#include <asm/setup.h>
#include <asm/irq.h>
@ -26,8 +27,25 @@
#include "generic.h"
static int ksz8081_phy_fixup(struct phy_device *phy)
{
int value;
value = phy_read(phy, 0x16);
value &= ~0x20;
phy_write(phy, 0x16, value);
return 0;
}
static void __init sama5_dt_device_init(void)
{
if (of_machine_is_compatible("atmel,sama5d4ek") &&
IS_ENABLED(CONFIG_PHYLIB)) {
phy_register_fixup_for_id("fc028000.etherne:00",
ksz8081_phy_fixup);
}
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}

View File

@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
post_div_table[1].div = 1;
post_div_table[2].div = 1;
video_div_table[1].div = 1;
video_div_table[2].div = 1;
video_div_table[3].div = 1;
}
clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));

View File

@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]);
clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
}

View File

@ -246,9 +246,14 @@ static int coherency_type(void)
return type;
}
/*
* As a precaution, we currently completely disable hardware I/O
* coherency, until enough testing is done with automatic I/O
* synchronization barriers to validate that it is a proper solution.
*/
int coherency_available(void)
{
return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
return false;
}
int __init coherency_init(void)

View File

@ -77,6 +77,24 @@ MACHINE_END
#endif
#ifdef CONFIG_ARCH_OMAP3
/* Some boards need board name for legacy userspace in /proc/cpuinfo */
static const char *const n900_boards_compat[] __initconst = {
"nokia,omap3-n900",
NULL,
};
DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,
.init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = n900_boards_compat,
.restart = omap3xxx_restart,
MACHINE_END
/* Generic omap3 boards, most boards can use these */
static const char *const omap3_boards_compat[] __initconst = {
"ti,omap3430",
"ti,omap3",

View File

@ -211,6 +211,7 @@ extern struct device *omap2_get_iva_device(void);
extern struct device *omap2_get_l3_device(void);
extern struct device *omap4_get_dsp_device(void);
unsigned int omap4_xlate_irq(unsigned int hwirq);
void omap_gic_of_init(void);
#ifdef CONFIG_CACHE_L2X0
@ -249,6 +250,7 @@ extern void omap4_cpu_die(unsigned int cpu);
extern struct smp_operations omap4_smp_ops;
extern void omap5_secondary_startup(void);
extern void omap5_secondary_hyp_startup(void);
#endif
#if defined(CONFIG_SMP) && defined(CONFIG_PM)

View File

@ -286,6 +286,10 @@
#define OMAP5XXX_CONTROL_STATUS 0x134
#define OMAP5_DEVICETYPE_MASK (0x7 << 6)
/* DRA7XX CONTROL CORE BOOTSTRAP */
#define DRA7_CTRL_CORE_BOOTSTRAP 0x6c4
#define DRA7_SPEEDSELECT_MASK (0x3 << 8)
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.

View File

@ -22,6 +22,7 @@
/* Physical address needed since MMU not enabled yet on secondary core */
#define AUX_CORE_BOOT0_PA 0x48281800
#define API_HYP_ENTRY 0x102
/*
* OMAP5 specific entry point for secondary CPU to jump from ROM
@ -40,6 +41,26 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
bne wait
b secondary_startup
ENDPROC(omap5_secondary_startup)
/*
* Same as omap5_secondary_startup except we call into the ROM to
* enable HYP mode first. This is called instead of
* omap5_secondary_startup if the primary CPU was put into HYP mode by
* the boot loader.
*/
ENTRY(omap5_secondary_hyp_startup)
wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0
ldr r0, [r2]
mov r0, r0, lsr #5
mrc p15, 0, r4, c0, c0, 5
and r4, r4, #0x0f
cmp r0, r4
bne wait_2
ldr r12, =API_HYP_ENTRY
adr r0, hyp_boot
smc #0
hyp_boot:
b secondary_startup
ENDPROC(omap5_secondary_hyp_startup)
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which

View File

@ -22,6 +22,7 @@
#include <linux/irqchip/arm-gic.h>
#include <asm/smp_scu.h>
#include <asm/virt.h>
#include "omap-secure.h"
#include "omap-wakeupgen.h"
@ -227,8 +228,16 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
if (omap_secure_apis_support())
omap_auxcoreboot_addr(virt_to_phys(startup_addr));
else
writel_relaxed(virt_to_phys(omap5_secondary_startup),
base + OMAP_AUX_CORE_BOOT_1);
/*
* If the boot CPU is in HYP mode then start secondary
* CPU in HYP mode as well.
*/
if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE)
writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup),
base + OMAP_AUX_CORE_BOOT_1);
else
writel_relaxed(virt_to_phys(omap5_secondary_startup),
base + OMAP_AUX_CORE_BOOT_1);
}

View File

@ -256,6 +256,38 @@ static int __init omap4_sar_ram_init(void)
}
omap_early_initcall(omap4_sar_ram_init);
static struct of_device_id gic_match[] = {
{ .compatible = "arm,cortex-a9-gic", },
{ .compatible = "arm,cortex-a15-gic", },
{ },
};
static struct device_node *gic_node;
unsigned int omap4_xlate_irq(unsigned int hwirq)
{
struct of_phandle_args irq_data;
unsigned int irq;
if (!gic_node)
gic_node = of_find_matching_node(NULL, gic_match);
if (WARN_ON(!gic_node))
return hwirq;
irq_data.np = gic_node;
irq_data.args_count = 3;
irq_data.args[0] = 0;
irq_data.args[1] = hwirq - OMAP44XX_IRQ_GIC_START;
irq_data.args[2] = IRQ_TYPE_LEVEL_HIGH;
irq = irq_create_of_mapping(&irq_data);
if (WARN_ON(!irq))
irq = hwirq;
return irq;
}
void __init omap_gic_of_init(void)
{
struct device_node *np;

View File

@ -3534,9 +3534,15 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
mpu_irqs_cnt = _count_mpu_irqs(oh);
for (i = 0; i < mpu_irqs_cnt; i++) {
unsigned int irq;
if (oh->xlate_irq)
irq = oh->xlate_irq((oh->mpu_irqs + i)->irq);
else
irq = (oh->mpu_irqs + i)->irq;
(res + r)->name = (oh->mpu_irqs + i)->name;
(res + r)->start = (oh->mpu_irqs + i)->irq;
(res + r)->end = (oh->mpu_irqs + i)->irq;
(res + r)->start = irq;
(res + r)->end = irq;
(res + r)->flags = IORESOURCE_IRQ;
r++;
}

View File

@ -676,6 +676,7 @@ struct omap_hwmod {
spinlock_t _lock;
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);
u16 flags;
u8 mpu_rt_idx;
u8 response_lat;

View File

@ -479,6 +479,7 @@ static struct omap_hwmod omap44xx_dma_system_hwmod = {
.class = &omap44xx_dma_hwmod_class,
.clkdm_name = "l3_dma_clkdm",
.mpu_irqs = omap44xx_dma_system_irqs,
.xlate_irq = omap4_xlate_irq,
.main_clk = "l3_div_ck",
.prcm = {
.omap4 = {
@ -640,6 +641,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.class = &omap44xx_dispc_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_dispc_irqs,
.xlate_irq = omap4_xlate_irq,
.sdma_reqs = omap44xx_dss_dispc_sdma_reqs,
.main_clk = "dss_dss_clk",
.prcm = {
@ -693,6 +695,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
.class = &omap44xx_dsi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_dsi1_irqs,
.xlate_irq = omap4_xlate_irq,
.sdma_reqs = omap44xx_dss_dsi1_sdma_reqs,
.main_clk = "dss_dss_clk",
.prcm = {
@ -726,6 +729,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
.class = &omap44xx_dsi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
.mpu_irqs = omap44xx_dss_dsi2_irqs,
.xlate_irq = omap4_xlate_irq,
.sdma_reqs = omap44xx_dss_dsi2_sdma_reqs,
.main_clk = "dss_dss_clk",
.prcm = {
@ -784,6 +788,7 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
*/
.flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.xlate_irq = omap4_xlate_irq,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
.prcm = {

View File

@ -288,6 +288,7 @@ static struct omap_hwmod omap54xx_dma_system_hwmod = {
.class = &omap54xx_dma_hwmod_class,
.clkdm_name = "dma_clkdm",
.mpu_irqs = omap54xx_dma_system_irqs,
.xlate_irq = omap4_xlate_irq,
.main_clk = "l3_iclk_div",
.prcm = {
.omap4 = {

View File

@ -498,6 +498,7 @@ struct omap_prcm_irq_setup {
u8 nr_irqs;
const struct omap_prcm_irq *irqs;
int irq;
unsigned int (*xlate_irq)(unsigned int);
void (*read_pending_irqs)(unsigned long *events);
void (*ocp_barrier)(void);
void (*save_and_clear_irqen)(u32 *saved_mask);

View File

@ -49,6 +49,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
.irqs = omap4_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap4_prcm_irqs),
.irq = 11 + OMAP44XX_IRQ_GIC_START,
.xlate_irq = omap4_xlate_irq,
.read_pending_irqs = &omap44xx_prm_read_pending_irqs,
.ocp_barrier = &omap44xx_prm_ocp_barrier,
.save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen,
@ -751,8 +752,10 @@ static int omap44xx_prm_late_init(void)
}
/* Once OMAP4 DT is filled as well */
if (irq_num >= 0)
if (irq_num >= 0) {
omap4_prcm_irq_setup.irq = irq_num;
omap4_prcm_irq_setup.xlate_irq = NULL;
}
}
omap44xx_prm_enable_io_wakeup();

View File

@ -187,6 +187,7 @@ int omap_prcm_event_to_irq(const char *name)
*/
void omap_prcm_irq_cleanup(void)
{
unsigned int irq;
int i;
if (!prcm_irq_setup) {
@ -211,7 +212,11 @@ void omap_prcm_irq_cleanup(void)
kfree(prcm_irq_setup->priority_mask);
prcm_irq_setup->priority_mask = NULL;
irq_set_chained_handler(prcm_irq_setup->irq, NULL);
if (prcm_irq_setup->xlate_irq)
irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq);
else
irq = prcm_irq_setup->irq;
irq_set_chained_handler(irq, NULL);
if (prcm_irq_setup->base_irq > 0)
irq_free_descs(prcm_irq_setup->base_irq,
@ -259,6 +264,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
int offset, i;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
unsigned int irq;
if (!irq_setup)
return -EINVAL;
@ -298,7 +304,11 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
1 << (offset & 0x1f);
}
irq_set_chained_handler(irq_setup->irq, omap_prcm_irq_handler);
if (irq_setup->xlate_irq)
irq = irq_setup->xlate_irq(irq_setup->irq);
else
irq = irq_setup->irq;
irq_set_chained_handler(irq, omap_prcm_irq_handler);
irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32,
0);

View File

@ -54,6 +54,7 @@
#include "soc.h"
#include "common.h"
#include "control.h"
#include "powerdomain.h"
#include "omap-secure.h"
@ -496,7 +497,8 @@ static void __init realtime_counter_init(void)
void __iomem *base;
static struct clk *sys_clk;
unsigned long rate;
unsigned int reg, num, den;
unsigned int reg;
unsigned long long num, den;
base = ioremap(REALTIME_COUNTER_BASE, SZ_32);
if (!base) {
@ -511,13 +513,42 @@ static void __init realtime_counter_init(void)
}
rate = clk_get_rate(sys_clk);
if (soc_is_dra7xx()) {
/*
* Errata i856 says the 32.768KHz crystal does not start at
* power on, so the CPU falls back to an emulated 32KHz clock
* based on sysclk / 610 instead. This causes the master counter
* frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2
* (OR sysclk * 75 / 244)
*
* This affects at least the DRA7/AM572x 1.0, 1.1 revisions.
* Of course any board built without a populated 32.768KHz
* crystal would also need this fix even if the CPU is fixed
* later.
*
* Either case can be detected by using the two speedselect bits
* If they are not 0, then the 32.768KHz clock driving the
* coarse counter that corrects the fine counter every time it
* ticks is actually rate/610 rather than 32.768KHz and we
* should compensate to avoid the 570ppm (at 20MHz, much worse
* at other rates) too fast system time.
*/
reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP);
if (reg & DRA7_SPEEDSELECT_MASK) {
num = 75;
den = 244;
goto sysclk1_based;
}
}
/* Numerator/denumerator values refer TRM Realtime Counter section */
switch (rate) {
case 1200000:
case 12000000:
num = 64;
den = 125;
break;
case 1300000:
case 13000000:
num = 768;
den = 1625;
break;
@ -529,11 +560,11 @@ static void __init realtime_counter_init(void)
num = 192;
den = 625;
break;
case 2600000:
case 26000000:
num = 384;
den = 1625;
break;
case 2700000:
case 27000000:
num = 256;
den = 1125;
break;
@ -545,6 +576,7 @@ static void __init realtime_counter_init(void)
break;
}
sysclk1_based:
/* Program numerator and denumerator registers */
reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) &
NUMERATOR_DENUMERATOR_MASK;
@ -556,7 +588,7 @@ static void __init realtime_counter_init(void)
reg |= den;
writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
arch_timer_freq = (rate / den) * num;
arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den);
set_cntfreq();
iounmap(base);

View File

@ -66,19 +66,24 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
#ifdef CONFIG_ARCH_OMAP4
void __init omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct i2c_board_info *devices, int nr_devices)
{
/* PMIC part*/
unsigned int irq;
omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT);
omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data);
irq = omap4_xlate_irq(7 + OMAP44XX_IRQ_GIC_START);
omap_pmic_init(1, 400, pmic_type, irq, pmic_data);
/* Register additional devices on i2c1 bus if needed */
if (devices)
i2c_register_board_info(1, devices, nr_devices);
}
#endif
void __init omap_pmic_late_init(void)
{

View File

@ -19,11 +19,37 @@
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/irqchip.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/hardware/cache-l2x0.h>
#include "core.h"
#define RK3288_GRF_SOC_CON0 0x244
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
/*
* Disable auto jtag/sdmmc switching that causes issues
* with the mmc controllers making them unreliable
*/
grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf");
if (!IS_ERR(grf))
regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000);
else
pr_err("rockchip: could not get grf syscon\n");
}
of_clk_init(NULL);
clocksource_of_init();
}
static void __init rockchip_dt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = {
DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.init_time = rockchip_timer_init,
.dt_compat = rockchip_board_dt_compat,
.init_machine = rockchip_dt_init,
MACHINE_END

View File

@ -800,7 +800,14 @@ void __init r8a7740_init_irq_of(void)
void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
gic_init(0, 29, gic_dist_base, gic_cpu_base);
#else
irqchip_init();
#endif
/* route signals to GIC */
iowrite32(0x0, pfc_inta_ctrl);

View File

@ -576,11 +576,18 @@ void __init r8a7778_init_irq_extpin(int irlm)
void __init r8a7778_init_irq_dt(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
#endif
BUG_ON(!base);
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
gic_init(0, 29, gic_dist_base, gic_cpu_base);
#else
irqchip_init();
#endif
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);

View File

@ -720,10 +720,17 @@ static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
void __init r8a7779_init_irq_dt(void)
{
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
void __iomem *gic_dist_base = ioremap_nocache(0xf0001000, 0x1000);
void __iomem *gic_cpu_base = ioremap_nocache(0xf0000100, 0x1000);
#endif
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
gic_init(0, 29, gic_dist_base, gic_cpu_base);
#else
irqchip_init();
#endif
/* route all interrupts to ARM */
__raw_writel(0xffffffff, INT2NTSR0);
__raw_writel(0x3fffffff, INT2NTSR1);

View File

@ -595,6 +595,7 @@ static struct platform_device ipmmu_device = {
static struct renesas_intc_irqpin_config irqpin0_platform_data = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
.control_parent = true,
};
static struct resource irqpin0_resources[] = {
@ -656,6 +657,7 @@ static struct platform_device irqpin1_device = {
static struct renesas_intc_irqpin_config irqpin2_platform_data = {
.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
.control_parent = true,
};
static struct resource irqpin2_resources[] = {
@ -686,6 +688,7 @@ static struct platform_device irqpin2_device = {
static struct renesas_intc_irqpin_config irqpin3_platform_data = {
.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
.control_parent = true,
};
static struct resource irqpin3_resources[] = {

View File

@ -220,9 +220,6 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level, u
static const char units[] = "KMGTPE";
u64 prot = val & pg_level[level].mask;
if (addr < USER_PGTABLES_CEILING)
return;
if (!st->level) {
st->level = level;
st->current_prot = prot;
@ -308,15 +305,13 @@ static void walk_pgd(struct seq_file *m)
pgd_t *pgd = swapper_pg_dir;
struct pg_state st;
unsigned long addr;
unsigned i, pgdoff = USER_PGTABLES_CEILING / PGDIR_SIZE;
unsigned i;
memset(&st, 0, sizeof(st));
st.seq = m;
st.marker = address_markers;
pgd += pgdoff;
for (i = pgdoff; i < PTRS_PER_PGD; i++, pgd++) {
for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
addr = i * PGDIR_SIZE;
if (!pgd_none(*pgd)) {
walk_pud(&st, pgd, addr);

View File

@ -658,8 +658,8 @@ static struct section_perm ro_perms[] = {
.start = (unsigned long)_stext,
.end = (unsigned long)__init_begin,
#ifdef CONFIG_ARM_LPAE
.mask = ~PMD_SECT_RDONLY,
.prot = PMD_SECT_RDONLY,
.mask = ~L_PMD_SECT_RDONLY,
.prot = L_PMD_SECT_RDONLY,
#else
.mask = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
.prot = PMD_SECT_APX | PMD_SECT_AP_WRITE,

View File

@ -1329,8 +1329,8 @@ static void __init kmap_init(void)
static void __init map_lowmem(void)
{
struct memblock_region *reg;
unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
/* Map all the lowmem memory banks. */
for_each_memblock(memory, reg) {

View File

@ -85,6 +85,7 @@ vdso_install:
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
$(Q)$(MAKE) $(clean)=$(boot)/dts
define archhelp
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'

View File

@ -3,6 +3,4 @@ dts-dirs += apm
dts-dirs += arm
dts-dirs += cavium
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb

View File

@ -22,7 +22,7 @@
};
chosen {
stdout-path = &soc_uart0;
stdout-path = "serial0:115200n8";
};
psci {

View File

@ -21,6 +21,7 @@
#include <asm/barrier.h>
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/types.h>

View File

@ -39,6 +39,7 @@ struct cpuinfo_arm64 {
u64 reg_id_aa64pfr0;
u64 reg_id_aa64pfr1;
u32 reg_id_dfr0;
u32 reg_id_isar0;
u32 reg_id_isar1;
u32 reg_id_isar2;
@ -51,6 +52,10 @@ struct cpuinfo_arm64 {
u32 reg_id_mmfr3;
u32 reg_id_pfr0;
u32 reg_id_pfr1;
u32 reg_mvfr0;
u32 reg_mvfr1;
u32 reg_mvfr2;
};
DECLARE_PER_CPU(struct cpuinfo_arm64, cpu_data);

View File

@ -41,6 +41,8 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
{
vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
vcpu->arch.hcr_el2 &= ~HCR_RW;
}
static inline unsigned long *vcpu_pc(const struct kvm_vcpu *vcpu)

View File

@ -31,6 +31,7 @@
#include <asm/fpsimd.h>
#include <asm/hw_breakpoint.h>
#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
#include <asm/types.h>
@ -123,9 +124,6 @@ struct task_struct;
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
/* Prepare to copy thread state - unlazy all lazy status */
#define prepare_to_copy(tsk) do { } while (0)
unsigned long get_wchan(struct task_struct *p);
#define cpu_relax() barrier()

View File

@ -44,7 +44,7 @@
#define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2)
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5)
#define __NR_compat_syscalls 386
#define __NR_compat_syscalls 388
#endif
#define __ARCH_WANT_SYS_CLONE

View File

@ -795,3 +795,5 @@ __SYSCALL(__NR_getrandom, sys_getrandom)
__SYSCALL(__NR_memfd_create, sys_memfd_create)
#define __NR_bpf 386
__SYSCALL(__NR_bpf, sys_bpf)
#define __NR_execveat 387
__SYSCALL(__NR_execveat, compat_sys_execveat)

View File

@ -147,6 +147,7 @@ static void cpuinfo_sanity_check(struct cpuinfo_arm64 *cur)
* If we have AArch32, we care about 32-bit features for compat. These
* registers should be RES0 otherwise.
*/
diff |= CHECK(id_dfr0, boot, cur, cpu);
diff |= CHECK(id_isar0, boot, cur, cpu);
diff |= CHECK(id_isar1, boot, cur, cpu);
diff |= CHECK(id_isar2, boot, cur, cpu);
@ -165,6 +166,10 @@ static void cpuinfo_sanity_check(struct cpuinfo_arm64 *cur)
diff |= CHECK(id_pfr0, boot, cur, cpu);
diff |= CHECK(id_pfr1, boot, cur, cpu);
diff |= CHECK(mvfr0, boot, cur, cpu);
diff |= CHECK(mvfr1, boot, cur, cpu);
diff |= CHECK(mvfr2, boot, cur, cpu);
/*
* Mismatched CPU features are a recipe for disaster. Don't even
* pretend to support them.
@ -189,6 +194,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
info->reg_id_dfr0 = read_cpuid(ID_DFR0_EL1);
info->reg_id_isar0 = read_cpuid(ID_ISAR0_EL1);
info->reg_id_isar1 = read_cpuid(ID_ISAR1_EL1);
info->reg_id_isar2 = read_cpuid(ID_ISAR2_EL1);
@ -202,6 +208,10 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_id_pfr0 = read_cpuid(ID_PFR0_EL1);
info->reg_id_pfr1 = read_cpuid(ID_PFR1_EL1);
info->reg_mvfr0 = read_cpuid(MVFR0_EL1);
info->reg_mvfr1 = read_cpuid(MVFR1_EL1);
info->reg_mvfr2 = read_cpuid(MVFR2_EL1);
cpuinfo_detect_icache_policy(info);
check_local_cpu_errata();

View File

@ -326,6 +326,7 @@ void __init efi_idmap_init(void)
/* boot time idmap_pg_dir is incomplete, so fill in missing parts */
efi_setup_idmap();
early_memunmap(memmap.map, memmap.map_end - memmap.map);
}
static int __init remap_region(efi_memory_desc_t *md, void **new)
@ -380,7 +381,6 @@ static int __init arm64_enter_virtual_mode(void)
}
mapsize = memmap.map_end - memmap.map;
early_memunmap(memmap.map, mapsize);
if (efi_runtime_disabled()) {
pr_info("EFI runtime services will be disabled.\n");

View File

@ -25,6 +25,7 @@
#include <linux/mm.h>
#include <linux/moduleloader.h>
#include <linux/vmalloc.h>
#include <asm/alternative.h>
#include <asm/insn.h>
#include <asm/sections.h>

View File

@ -50,3 +50,11 @@ u64 perf_reg_abi(struct task_struct *task)
else
return PERF_SAMPLE_REGS_ABI_64;
}
void perf_get_regs_user(struct perf_regs *regs_user,
struct pt_regs *regs,
struct pt_regs *regs_user_copy)
{
regs_user->regs = task_pt_regs(current);
regs_user->abi = perf_reg_abi(current);
}

View File

@ -402,6 +402,7 @@ void __init setup_arch(char **cmdline_p)
request_standard_resources();
efi_idmap_init();
early_ioremap_reset();
unflatten_device_tree();

View File

@ -25,6 +25,7 @@
#include <asm/cacheflush.h>
#include <asm/cpu_ops.h>
#include <asm/cputype.h>
#include <asm/io.h>
#include <asm/smp_plat.h>
extern void secondary_holding_pen(void);

View File

@ -1014,6 +1014,7 @@ ENTRY(__kvm_tlb_flush_vmid_ipa)
* Instead, we invalidate Stage-2 for this IPA, and the
* whole of Stage-1. Weep...
*/
lsr x1, x1, #12
tlbi ipas2e1is, x1
/*
* We have to ensure completion of the invalidation at Stage-2,

View File

@ -90,7 +90,6 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
if (!cpu_has_32bit_el1())
return -EINVAL;
cpu_reset = &default_regs_reset32;
vcpu->arch.hcr_el2 &= ~HCR_RW;
} else {
cpu_reset = &default_regs_reset;
}

View File

@ -15,6 +15,7 @@
*/
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/seq_file.h>

View File

@ -335,14 +335,8 @@ static int keep_initrd;
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (!keep_initrd) {
if (start == initrd_start)
start = round_down(start, PAGE_SIZE);
if (end == initrd_end)
end = round_up(end, PAGE_SIZE);
if (!keep_initrd)
free_reserved_area((void *)start, (void *)end, 0, "initrd");
}
}
static int __init keepinitrd_setup(char *__unused)

View File

@ -19,12 +19,10 @@
#include <linux/moduleloader.h>
#include <linux/vmalloc.h>
void module_free(struct module *mod, void *module_region)
void module_arch_freeing_init(struct module *mod)
{
vfree(mod->arch.syminfo);
mod->arch.syminfo = NULL;
vfree(module_region);
}
static inline int check_rela(Elf32_Rela *rela, struct module *module,
@ -291,12 +289,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
return ret;
}
int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *module)
{
vfree(module->arch.syminfo);
module->arch.syminfo = NULL;
return 0;
}

View File

@ -7,6 +7,7 @@
*/
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>

View File

@ -604,7 +604,7 @@ static ssize_t __sync_serial_read(struct file *file,
struct timespec *ts)
{
unsigned long flags;
int dev = MINOR(file->f_dentry->d_inode->i_rdev);
int dev = MINOR(file_inode(file)->i_rdev);
int avail;
struct sync_port *port;
unsigned char *start;

View File

@ -36,7 +36,7 @@ void *module_alloc(unsigned long size)
}
/* Free memory returned from module_alloc */
void module_free(struct module *mod, void *module_region)
void module_memfree(void *module_region)
{
kfree(module_region);
}

View File

@ -94,7 +94,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
r = &dev->resource[idx];
if (!r->start)
continue;
pci_claim_resource(dev, idx);
pci_claim_bridge_resource(dev, idx);
}
}
pcibios_allocate_bus_resources(&bus->children);

View File

@ -11,7 +11,7 @@
#define NR_syscalls 318 /* length of syscall table */
#define NR_syscalls 319 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about

Some files were not shown because too many files have changed in this diff Show More