MIPS: Use GENERIC_IOMAP

MIPS has a copy of lib/iomap.c with minor alterations, none of which are
necessary given appropriate definitions of PIO_OFFSET, PIO_MASK &
PIO_RESERVED. Provide such definitions, select GENERIC_IOMAP & remove
arch/mips/lib/iomap.c to cut back on the needless duplication.

The one change this does make is to our mmio_{in,out}s[bwl] functions,
which began to deviate from their generic counterparts with commit
0845bb721e ("MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO"). I
suspect that this commit was incorrect, and that the SEAD-3 platform
should have instead selected CONFIG_SWAP_IO_SPACE. Since the SEAD-3
platform code is now gone & the board is instead supported by the
generic platform (CONFIG_MIPS_GENERIC) which selects
CONFIG_SWAP_IO_SPACE anyway, this shouldn't be a problem any more.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20342/
Cc: linux-mips@linux-mips.org
This commit is contained in:
Paul Burton 2018-08-29 14:54:00 -07:00
parent e245767abf
commit b962aeb022
No known key found for this signature in database
GPG Key ID: 3EA79FACB57500DD
5 changed files with 12 additions and 241 deletions

View File

@ -21,6 +21,7 @@ config MIPS
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_LIB_ASHLDI3
@ -28,7 +29,6 @@ config MIPS
select GENERIC_LIB_CMPDI2
select GENERIC_LIB_LSHRDI3
select GENERIC_LIB_UCMPDI2
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL

View File

@ -79,6 +79,16 @@ static inline void set_io_port_base(unsigned long base)
barrier();
}
/*
* Provide the necessary definitions for generic iomap. We make use of
* mips_io_port_base for iomap(), but we don't reserve any low addresses for
* use with I/O ports.
*/
#define HAVE_ARCH_PIO_SIZE
#define PIO_OFFSET mips_io_port_base
#define PIO_MASK IO_SPACE_LIMIT
#define PIO_RESERVED 0x0UL
/*
* Thanks to James van Artsdalen for a better timing-fix than
* the two short jumps: using outb's to a nonexistent port seems
@ -172,11 +182,6 @@ static inline void *isa_bus_to_virt(unsigned long address)
extern void __iomem * __ioremap(phys_addr_t offset, phys_addr_t size, unsigned long flags);
extern void __iounmap(const volatile void __iomem *addr);
#ifndef CONFIG_PCI
struct pci_dev;
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
#endif
static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long size,
unsigned long flags)
{

View File

@ -7,7 +7,7 @@ lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
mips-atomic.o strncpy_user.o \
strnlen_user.o uncached.o
obj-y += iomap.o iomap_copy.o
obj-y += iomap_copy.o
obj-$(CONFIG_PCI) += iomap-pci.o
lib-$(CONFIG_GENERIC_CSUM) := $(filter-out csum_partial.o, $(lib-y))

View File

@ -44,10 +44,3 @@ void __iomem *__pci_ioport_map(struct pci_dev *dev,
}
#endif /* CONFIG_PCI_DRIVERS_LEGACY */
void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
{
iounmap(addr);
}
EXPORT_SYMBOL(pci_iounmap);

View File

@ -1,227 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Implement the default iomap interfaces
*
* (C) Copyright 2004 Linus Torvalds
* (C) Copyright 2006 Ralf Baechle <ralf@linux-mips.org>
* (C) Copyright 2007 MIPS Technologies, Inc.
* written by Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/export.h>
#include <asm/io.h>
/*
* Read/write from/to an (offsettable) iomem cookie. It might be a PIO
* access or a MMIO access, these functions don't care. The info is
* encoded in the hardware mapping set up by the mapping functions
* (or the cookie itself, depending on implementation and hw).
*
* The generic routines don't assume any hardware mappings, and just
* encode the PIO/MMIO as part of the cookie. They coldly assume that
* the MMIO IO mappings are not in the low address range.
*
* Architectures for which this is not true can't use this generic
* implementation and should do their own copy.
*/
#define PIO_MASK 0x0ffffUL
unsigned int ioread8(void __iomem *addr)
{
return readb(addr);
}
EXPORT_SYMBOL(ioread8);
unsigned int ioread16(void __iomem *addr)
{
return readw(addr);
}
EXPORT_SYMBOL(ioread16);
unsigned int ioread16be(void __iomem *addr)
{
return be16_to_cpu(__raw_readw(addr));
}
EXPORT_SYMBOL(ioread16be);
unsigned int ioread32(void __iomem *addr)
{
return readl(addr);
}
EXPORT_SYMBOL(ioread32);
unsigned int ioread32be(void __iomem *addr)
{
return be32_to_cpu(__raw_readl(addr));
}
EXPORT_SYMBOL(ioread32be);
void iowrite8(u8 val, void __iomem *addr)
{
writeb(val, addr);
}
EXPORT_SYMBOL(iowrite8);
void iowrite16(u16 val, void __iomem *addr)
{
writew(val, addr);
}
EXPORT_SYMBOL(iowrite16);
void iowrite16be(u16 val, void __iomem *addr)
{
__raw_writew(cpu_to_be16(val), addr);
}
EXPORT_SYMBOL(iowrite16be);
void iowrite32(u32 val, void __iomem *addr)
{
writel(val, addr);
}
EXPORT_SYMBOL(iowrite32);
void iowrite32be(u32 val, void __iomem *addr)
{
__raw_writel(cpu_to_be32(val), addr);
}
EXPORT_SYMBOL(iowrite32be);
/*
* These are the "repeat MMIO read/write" functions.
* Note the "__mem" accesses, since we want to convert
* to CPU byte order if the host bus happens to not match the
* endianness of PCI/ISA (see mach-generic/mangle-port.h).
*/
static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
{
while (--count >= 0) {
u8 data = __mem_readb(addr);
*dst = data;
dst++;
}
}
static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
{
while (--count >= 0) {
u16 data = __mem_readw(addr);
*dst = data;
dst++;
}
}
static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
{
while (--count >= 0) {
u32 data = __mem_readl(addr);
*dst = data;
dst++;
}
}
static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
{
while (--count >= 0) {
__mem_writeb(*src, addr);
src++;
}
}
static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
{
while (--count >= 0) {
__mem_writew(*src, addr);
src++;
}
}
static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
{
while (--count >= 0) {
__mem_writel(*src, addr);
src++;
}
}
void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
{
mmio_insb(addr, dst, count);
}
EXPORT_SYMBOL(ioread8_rep);
void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
{
mmio_insw(addr, dst, count);
}
EXPORT_SYMBOL(ioread16_rep);
void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
{
mmio_insl(addr, dst, count);
}
EXPORT_SYMBOL(ioread32_rep);
void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
{
mmio_outsb(addr, src, count);
}
EXPORT_SYMBOL(iowrite8_rep);
void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
{
mmio_outsw(addr, src, count);
}
EXPORT_SYMBOL(iowrite16_rep);
void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
{
mmio_outsl(addr, src, count);
}
EXPORT_SYMBOL(iowrite32_rep);
/*
* Create a virtual mapping cookie for an IO port range
*
* This uses the same mapping are as the in/out family which has to be setup
* by the platform initialization code.
*
* Just to make matters somewhat more interesting on MIPS systems with
* multiple host bridge each will have it's own ioport address space.
*/
static void __iomem *ioport_map_legacy(unsigned long port, unsigned int nr)
{
return (void __iomem *) (mips_io_port_base + port);
}
void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
if (port > PIO_MASK)
return NULL;
return ioport_map_legacy(port, nr);
}
EXPORT_SYMBOL(ioport_map);
void ioport_unmap(void __iomem *addr)
{
/* Nothing to do */
}
EXPORT_SYMBOL(ioport_unmap);