diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 061201388dac..fb65e598bffb 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -6,7 +6,7 @@ obj-y				:= clock.o cpu.o devices.o devices-common.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
 obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o
-obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
+obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
new file mode 100644
index 000000000000..54712acc0394
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/gpio.h>
+
+#include <plat/pincfg.h>
+#include <mach/db5500-regs.h>
+#include <plat/ste_dma40.h>
+
+#include "pins-db5500.h"
+#include "devices-db5500.h"
+#include "ste-dma40-db5500.h"
+
+static pin_cfg_t u5500_sdi_pins[] = {
+	/* SDI0 (POP eMMC) */
+	GPIO5_MC0_DAT0		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO6_MC0_DAT1		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO7_MC0_DAT2		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO8_MC0_DAT3		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO9_MC0_DAT4		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO10_MC0_DAT5		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO11_MC0_DAT6		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO12_MC0_DAT7		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO13_MC0_CMD		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO14_MC0_CLK		| PIN_DIR_OUTPUT | PIN_VAL_LOW,
+};
+
+static struct mmci_platform_data u5500_sdi0_data = {
+	.ocr_mask	= MMC_VDD_165_195,
+	.f_max		= 50000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_8_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+void __init u5500_sdi_init(void)
+{
+	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
+
+	db5500_add_sdi0(&u5500_sdi0_data);
+}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9a5db956deba..39d370c1f3b4 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -31,10 +31,11 @@ static void __init u5500_init_machine(void)
 {
 	u5500_init_devices();
 
+	u5500_sdi_init();
 	u5500_uart_init();
 }
 
-MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
 	.boot_params	= 0x00000100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 3d4e8eb403ba..598902da31d8 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -579,6 +579,8 @@ int __init clk_init(void)
 		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
 		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
 		clk_per6clk.rate = 26000000;
+		clk_uartclk.rate = 36360000;
+		clk_sdmmcclk.rate = 99900000;
 	}
 
 	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 322a1c1f2bae..22788a7d35dc 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -22,6 +22,9 @@ extern void __init u5500_init_devices(void);
 extern void __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
+
+extern void __init u5500_sdi_init(void);
+
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);