OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

powerpc updates for 4.14 

Nothing really major this release, despite quite a lot of activity. Just lots of
 things all over the place.
 
 Some things of note include:
 
  - Access via perf to a new type of PMU (IMC) on Power9, which can count both
    core events as well as nest unit events (Memory controller etc).
 
  - Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page
    Walk Cache (PWC) flushes when the structure of the tree is not changing.
 
  - Reworks/cleanups of do_page_fault() to modernise it and bring it closer to
    other architectures where possible.
 
  - Rework of our page table walking so that THP updates only need to send IPIs
    to CPUs where the affected mm has run, rather than all CPUs.
 
  - The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems.
    This avoids problems with the percpu allocator on systems with very sparse
    NUMA layouts.
 
  - STRICT_KERNEL_RWX support on PPC32.
 
  - A new sched domain topology for Power9, to capture the fact that pairs of
    cores may share an L2 cache.
 
  - Power9 support for VAS, which is a new mechanism for accessing coprocessors,
    and initial support for using it with the NX compression accelerator.
 
  - Major work on the instruction emulation support, adding support for many new
    instructions, and reworking it so it can be used to implement the emulation
    needed to fixup alignment faults.
 
  - Support for guests under PowerVM to use the Power9 XIVE interrupt controller.
 
 And probably that many things again that are almost as interesting, but I had to
 keep the list short. Plus the usual fixes and cleanups as always.
 
 Thanks to:
   Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal,
   Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter,
   Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand,
   Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE
   Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro
   Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot,
   Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica
   Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood,
   Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding,
   Victor Aoqui.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZr83SAAoJEFHr6jzI4aWA6pUP/3CEaj2bSxNzWIwidqyYjuoS
 O1moEsP0oYH7eBEWVHalYxvo0QPIIAhbFPaFyrOrgtfDH01Szwu9LcCALGb8orC5
 Hg3IY8mpNG3Q1T8wEtTa56Ik4b5ZFty35S5+X9qLNSFoDUqSvGlSsLzhPNN7f2tl
 XFm2hWqd8wXCwDsuVSFBCF61M3SAm+g6NMVNJ+VL2KIDCwBrOZLhKDPRoxLTAuMa
 jjSdjVIozWyXjUrBFi8HVcoOWLxcT1HsNF0tRs51LwY/+Mlj2jAtFtsx+a06HZa6
 f2p/Kcp/MEispSTk064Ap9cC1seXWI18zwZKpCUFqu0Ec2yTAiGdjOWDyYQldIp+
 ttVPSHQ01YrVKwDFTtM9CiA0EET6fVPhWgAPkPfvH5TvtKwGkNdy0b+nQLuWrYip
 BUmOXmjdIG3nujCzA9sv6/uNNhjhj2y+HWwuV7Qo002VFkhgZFL67u2SSUQLpYPj
 PxdkY8pPVq+O+in94oDV3c36dYFF6+g6A6505Vn6eKUm/TLpszRFGkS3bKKA5vtn
 74FR+guV/5RwYJcdZbfm04DgAocl7AfUDxpwRxibt6KtAK2VZKQuw4ugUTgYEd7W
 mL2+AMmPKuajWXAMTHjCZPbUp9gFNyYyBQTFfGVX/XLiM8erKBnGfoa1/KzUJkhr
 fVZLYIO/gzl34PiTIfgD
 =UJtt
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Nothing really major this release, despite quite a lot of activity.
  Just lots of things all over the place.

  Some things of note include:

   - Access via perf to a new type of PMU (IMC) on Power9, which can
     count both core events as well as nest unit events (Memory
     controller etc).

   - Optimisations to the radix MMU TLB flushing, mostly to avoid
     unnecessary Page Walk Cache (PWC) flushes when the structure of the
     tree is not changing.

   - Reworks/cleanups of do_page_fault() to modernise it and bring it
     closer to other architectures where possible.

   - Rework of our page table walking so that THP updates only need to
     send IPIs to CPUs where the affected mm has run, rather than all
     CPUs.

   - The size of our vmalloc area is increased to 56T on 64-bit hash MMU
     systems. This avoids problems with the percpu allocator on systems
     with very sparse NUMA layouts.

   - STRICT_KERNEL_RWX support on PPC32.

   - A new sched domain topology for Power9, to capture the fact that
     pairs of cores may share an L2 cache.

   - Power9 support for VAS, which is a new mechanism for accessing
     coprocessors, and initial support for using it with the NX
     compression accelerator.

   - Major work on the instruction emulation support, adding support for
     many new instructions, and reworking it so it can be used to
     implement the emulation needed to fixup alignment faults.

   - Support for guests under PowerVM to use the Power9 XIVE interrupt
     controller.

  And probably that many things again that are almost as interesting,
  but I had to keep the list short. Plus the usual fixes and cleanups as
  always.

  Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
  Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
  Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
  Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
  Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
  LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
  Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
  Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
  Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
  Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
  Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"

* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
  powerpc/xive: Fix section __init warning
  powerpc: Fix kernel crash in emulation of vector loads and stores
  powerpc/xive: improve debugging macros
  powerpc/xive: add XIVE Exploitation Mode to CAS
  powerpc/xive: introduce H_INT_ESB hcall
  powerpc/xive: add the HW IRQ number under xive_irq_data
  powerpc/xive: introduce xive_esb_write()
  powerpc/xive: rename xive_poke_esb() in xive_esb_read()
  powerpc/xive: guest exploitation of the XIVE interrupt controller
  powerpc/xive: introduce a common routine xive_queue_page_alloc()
  powerpc/sstep: Avoid used uninitialized error
  axonram: Return directly after a failed kzalloc() in axon_ram_probe()
  axonram: Improve a size determination in axon_ram_probe()
  axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
  powerpc/powernv/npu: Move tlb flush before launching ATSD
  powerpc/macintosh: constify wf_sensor_ops structures
  powerpc/iommu: Use permission-specific DEVICE_ATTR variants
  powerpc/eeh: Delete an error out of memory message at init time
  powerpc/mm: Use seq_putc() in two functions
  macintosh: Convert to using %pOF instead of full_name
  ...
This commit is contained in:
Linus Torvalds 2017-09-07 10:15:40 -07:00
parent f92e3da18b 265601f034
commit bac65d9d87
428 changed files with 11502 additions and 5080 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
Documentation/ABI/testing/ppc-memtrace Normal file
View File

@ -0,0 +1,45 @@
What: /sys/kernel/debug/powerpc/memtrace
Date: Aug 2017
KernelVersion: 4.14
Contact: linuxppc-dev@lists.ozlabs.org
Description: This folder contains the relevant debugfs files for the
hardware trace macro to use. CONFIG_PPC64_HARDWARE_TRACING
must be set.
What: /sys/kernel/debug/powerpc/memtrace/enable
Date: Aug 2017
KernelVersion: 4.14
Contact: linuxppc-dev@lists.ozlabs.org
Description: Write an integer containing the size in bytes of the memory
you want removed from each NUMA node to this file - it must be
aligned to the memblock size. This amount of RAM will be removed
from the kernel mappings and the following debugfs files will be
created. This can only be successfully done once per boot. Once
memory is successfully removed from each node, the following
files are created.
What: /sys/kernel/debug/powerpc/memtrace/<node-id>
Date: Aug 2017
KernelVersion: 4.14
Contact: linuxppc-dev@lists.ozlabs.org
Description: This directory contains information about the removed memory
from the specific NUMA node.
What: /sys/kernel/debug/powerpc/memtrace/<node-id>/size
Date: Aug 2017
KernelVersion: 4.14
Contact: linuxppc-dev@lists.ozlabs.org
Description: This contains the size of the memory removed from the node.
What: /sys/kernel/debug/powerpc/memtrace/<node-id>/start
Date: Aug 2017
KernelVersion: 4.14
Contact: linuxppc-dev@lists.ozlabs.org
Description: This contains the start address of the removed memory.
What: /sys/kernel/debug/powerpc/memtrace/<node-id>/trace
Date: Aug 2017
KernelVersion: 4.14
Contact: linuxppc-dev@lists.ozlabs.org
Description: This is where the hardware trace macro will output the trace
it generates.

31
Documentation/ABI/testing/sysfs-firmware-opal-powercap Normal file
View File

@ -0,0 +1,31 @@
What: /sys/firmware/opal/powercap
Date: August 2017
Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
Description: Powercap directory for Powernv (P8, P9) servers
Each folder in this directory contains a
power-cappable component.
What: /sys/firmware/opal/powercap/system-powercap
/sys/firmware/opal/powercap/system-powercap/powercap-min
/sys/firmware/opal/powercap/system-powercap/powercap-max
/sys/firmware/opal/powercap/system-powercap/powercap-current
Date: August 2017
Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
Description: System powercap directory and attributes applicable for
Powernv (P8, P9) servers
This directory provides powercap information. It
contains below sysfs attributes:
- powercap-min : This file provides the minimum
possible powercap in Watt units
- powercap-max : This file provides the maximum
possible powercap in Watt units
- powercap-current : This file provides the current
powercap set on the system. Writing to this file
creates a request for setting a new-powercap. The
powercap requested must be between powercap-min
and powercap-max.

18
Documentation/ABI/testing/sysfs-firmware-opal-psr Normal file
View File

@ -0,0 +1,18 @@
What: /sys/firmware/opal/psr
Date: August 2017
Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
Description: Power-Shift-Ratio directory for Powernv P9 servers
Power-Shift-Ratio allows to provide hints the firmware
to shift/throttle power between different entities in
the system. Each attribute in this directory indicates
a settable PSR.
What: /sys/firmware/opal/psr/cpu_to_gpu_X
Date: August 2017
Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
Description: PSR sysfs attributes for Powernv P9 servers
Power-Shift-Ratio between CPU and GPU for a given chip
with chip-id X. This file gives the ratio (0-100)
which is used by OCC for power-capping.

22
Documentation/devicetree/bindings/powerpc/ibm,vas.txt Normal file
View File

@ -0,0 +1,22 @@
* IBM Powerpc Virtual Accelerator Switchboard (VAS)
VAS is a hardware mechanism that allows kernel subsystems and user processes
to directly submit compression and other requests to Nest accelerators (NX)
or other coprocessors functions.
Required properties:
- compatible : should be "ibm,vas".
- ibm,vas-id : A unique identifier for each instance of VAS in the system
- reg : Should contain 4 pairs of 64-bit fields specifying the Hypervisor
window context start and length, OS/User window context start and length,
"Paste address" start and length, "Paste window id" start bit and number
of bits)
Example:
vas@6019100000000 {
compatible = "ibm,vas", "ibm,power9-vas";
reg = <0x6019100000000 0x2000000 0x6019000000000 0x100000000 0x8000000000000 0x100000000 0x20 0x10>;
name = "vas";
ibm,vas-id = <0x1>;
};

27
Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt Normal file
View File

@ -0,0 +1,27 @@
IBM OPAL Sensor Groups Binding
-------------------------------
Node: /ibm,opal/sensor-groups
Description: Contains sensor groups available in the Powernv P9
servers. Each child node indicates a sensor group.
- compatible : Should be "ibm,opal-sensor-group"
Each child node contains below properties:
- type : String to indicate the type of sensor-group
- sensor-group-id: Abstract unique identifier provided by firmware of
type <u32> which is used for sensor-group
operations like clearing the min/max history of all
sensors belonging to the group.
- ibm,chip-id : Chip ID
- sensors : Phandle array of child nodes of /ibm,opal/sensor/
belonging to this group
- ops : Array of opal-call numbers indicating available operations on
sensor groups like clearing min/max, enabling/disabling sensor
group.

10
MAINTAINERS
View File

@ -6494,6 +6494,15 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/ibm/ibmvnic.*
IBM Power Virtual Accelerator Switchboard
M: Sukadev Bhattiprolu
L: linuxppc-dev@lists.ozlabs.org
S: Supported
F: arch/powerpc/platforms/powernv/vas*
F: arch/powerpc/platforms/powernv/copy-paste.h
F: arch/powerpc/include/asm/vas.h
F: arch/powerpc/include/uapi/asm/vas.h
IBM Power Virtual Ethernet Device Driver
M: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
@ -7830,6 +7839,7 @@ F: drivers/pci/hotplug/rpa*
F: drivers/rtc/rtc-opal.c
F: drivers/scsi/ibmvscsi/
F: drivers/tty/hvc/hvc_opal.c
F: drivers/watchdog/wdrtas.c
F: tools/testing/selftests/powerpc
N: /pmac
N: powermac

38
arch/powerpc/Kconfig
View File

@ -85,6 +85,17 @@ config NMI_IPI
depends on SMP && (DEBUGGER || KEXEC_CORE || HARDLOCKUP_DETECTOR)
default y
config PPC_WATCHDOG
bool
depends on HARDLOCKUP_DETECTOR
depends on HAVE_HARDLOCKUP_DETECTOR_ARCH
default y
help
This is a placeholder when the powerpc hardlockup detector
watchdog is selected (arch/powerpc/kernel/watchdog.c). It is
seleted via the generic lockup detector menu which is why we
have no standalone config option for it here.
config STACKTRACE_SUPPORT
bool
default y
@ -165,7 +176,7 @@ config PPC
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select ARCH_HAS_STRICT_KERNEL_RWX if (PPC_BOOK3S_64 && !RELOCATABLE && !HIBERNATION)
select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
select HAVE_CBPF_JIT if !PPC64
select HAVE_CONTEXT_TRACKING if PPC64
@ -356,10 +367,6 @@ config PPC_ADV_DEBUG_DAC_RANGE
depends on PPC_ADV_DEBUG_REGS && 44x
default y
config PPC_EMULATE_SSTEP
bool
default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT
config ZONE_DMA32
bool
default y if PPC64
@ -394,7 +401,7 @@ config HUGETLB_PAGE_SIZE_VARIABLE
config MATH_EMULATION
bool "Math emulation"
depends on 4xx || 8xx || PPC_MPC832x || BOOKE
depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
@ -956,9 +963,9 @@ config PPC_PCI_CHOICE
config PCI
bool "PCI support" if PPC_PCI_CHOICE
default y if !40x && !CPM2 && !8xx && !PPC_83xx \
default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
default PCI_QSPAN if !4xx && !CPM2 && 8xx
default PCI_QSPAN if PPC_8xx
select GENERIC_PCI_IOMAP
help
Find out whether your system includes a PCI bus. PCI is the name of
@ -974,7 +981,7 @@ config PCI_SYSCALL
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
depends on PPC_8xx
select PPC_I8259
help
Say Y here if you have a system based on a Motorola 8xx-series
@ -1165,12 +1172,23 @@ config CONSISTENT_SIZE
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
depends on ADVANCED_OPTIONS && PPC_8xx && \
!DEBUG_PAGEALLOC && !STRICT_KERNEL_RWX
config PIN_TLB_DATA
bool "Pinned TLB for DATA"
depends on PIN_TLB
default y
config PIN_TLB_IMMR
bool "Pinned TLB for IMMR"
depends on PIN_TLB
default y
config PIN_TLB_TEXT
bool "Pinned TLB for TEXT"
depends on PIN_TLB
default y
endmenu
if PPC64

6
arch/powerpc/Makefile
View File

@ -250,7 +250,7 @@ KBUILD_AFLAGS += $(aflags-y)
KBUILD_CFLAGS += $(cflags-y)
head-y := arch/powerpc/kernel/head_$(BITS).o
head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
head-$(CONFIG_PPC_8xx) := arch/powerpc/kernel/head_8xx.o
head-$(CONFIG_40x) := arch/powerpc/kernel/head_40x.o
head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o
head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o
@ -317,6 +317,10 @@ PHONY += ppc64le_defconfig
ppc64le_defconfig:
$(call merge_into_defconfig,ppc64_defconfig,le)
PHONY += powernv_be_defconfig
powernv_be_defconfig:
$(call merge_into_defconfig,powernv_defconfig,be)
PHONY += mpc85xx_defconfig
mpc85xx_defconfig:
$(call merge_into_defconfig,mpc85xx_basic_defconfig,\

2
arch/powerpc/boot/4xx.c
View File

@ -564,7 +564,7 @@ void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
fbdv = 16;
cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;

11
arch/powerpc/boot/Makefile
View File

@ -107,17 +107,18 @@ src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
$(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
elf_util.c $(zlib-y) devtree.c stdlib.c \
oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \
uartlite.c mpc52xx-psc.c opal.c
oflib.c ofconsole.c cuboot.c cpm-serial.c \
uartlite.c opal.c
src-wlib-$(CONFIG_PPC_MPC52XX) += mpc52xx-psc.c
src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S
ifndef CONFIG_PPC64_BOOT_WRAPPER
src-wlib-y += crtsavres.S
endif
src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
src-wlib-$(CONFIG_EMBEDDED6xx) += mpsc.c mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
src-plat-y := of.c epapr.c
src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
@ -132,7 +133,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
treeboot-iss4xx.c treeboot-currituck.c \
treeboot-akebono.c \
simpleboot.c fixed-head.S virtex.c
src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c

18
arch/powerpc/boot/crt0.S
View File

@ -26,17 +26,17 @@ _zimage_start_opd:
#ifdef __powerpc64__
.balign 8
p_start: .llong _start
p_etext: .llong _etext
p_bss_start: .llong __bss_start
p_end: .llong _end
p_start: .8byte _start
p_etext: .8byte _etext
p_bss_start: .8byte __bss_start
p_end: .8byte _end
p_toc: .llong __toc_start + 0x8000 - p_base
p_dyn: .llong __dynamic_start - p_base
p_rela: .llong __rela_dyn_start - p_base
p_prom: .llong 0
p_toc: .8byte __toc_start + 0x8000 - p_base
p_dyn: .8byte __dynamic_start - p_base
p_rela: .8byte __rela_dyn_start - p_base
p_prom: .8byte 0
.weak _platform_stack_top
p_pstack: .llong _platform_stack_top
p_pstack: .8byte _platform_stack_top
#else
p_start: .long _start
p_etext: .long _etext

33
arch/powerpc/boot/dts/fsp2.dts
View File

@ -52,6 +52,7 @@
clocks {
mmc_clk: mmc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-output-names = "mmc_clk";
};
@ -359,20 +360,6 @@
interrupts = <31 0x4 15 0x84>;
};
mmc0: sdhci@020c0000 {
compatible = "st,sdhci-stih407", "st,sdhci";
status = "disabled";
reg = <0x020c0000 0x20000>;
reg-names = "mmc";
interrupt-parent = <&UIC1_3>;
interrupts = <21 0x4 22 0x4>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <>;
clock-names = "mmc";
clocks = <&mmc_clk>;
};
plb6 {
compatible = "ibm,plb6";
#address-cells = <2>;
@ -501,6 +488,24 @@
/*RXDE*/ 4 &UIC1_2 13 0x4>;
};
mmc0: mmc@20c0000 {
compatible = "st,sdhci-stih407", "st,sdhci";
reg = <0x020c0000 0x20000>;
reg-names = "mmc";
interrupts = <21 0x4>;
interrupt-parent = <&UIC1_3>;
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <>;
clock-names = "mmc";
clocks = <&mmc_clk>;
bus-width = <4>;
non-removable;
sd-uhs-sdr50;
sd-uhs-sdr104;
sd-uhs-ddr50;
};
opb {
compatible = "ibm,opb";
#address-cells = <1>;

8
arch/powerpc/boot/ppc_asm.h
View File

@ -80,4 +80,12 @@
.long 0xa6037b7d; /* mtsrr1 r11 */ \
.long 0x2400004c /* rfid */
#ifdef CONFIG_PPC_8xx
#define MFTBL(dest) mftb dest
#define MFTBU(dest) mftbu dest
#else
#define MFTBL(dest) mfspr dest, SPRN_TBRL
#define MFTBU(dest) mfspr dest, SPRN_TBRU
#endif
#endif /* _PPC64_PPC_ASM_H */

4
arch/powerpc/boot/serial.c
View File

@ -120,15 +120,19 @@ int serial_console_init(void)
if (dt_is_compatible(devp, "ns16550") ||
dt_is_compatible(devp, "pnpPNP,501"))
rc = ns16550_console_init(devp, &serial_cd);
#ifdef CONFIG_EMBEDDED6xx
else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
#endif
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
dt_is_compatible(devp, "fsl,cpm2-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm2-smc-uart"))
rc = cpm_console_init(devp, &serial_cd);
#ifdef CONFIG_PPC_MPC52XX
else if (dt_is_compatible(devp, "fsl,mpc5200-psc-uart"))
rc = mpc5200_psc_console_init(devp, &serial_cd);
#endif
else if (dt_is_compatible(devp, "xlnx,opb-uartlite-1.00.b") ||
dt_is_compatible(devp, "xlnx,xps-uartlite-1.00.a"))
rc = uartlite_console_init(devp, &serial_cd);

24
arch/powerpc/boot/util.S
View File

@ -71,32 +71,18 @@ udelay:
add r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
#ifdef CONFIG_8xx
1: mftbu r5
mftb r6
mftbu r7
#else
1: mfspr r5, SPRN_TBRU
mfspr r6, SPRN_TBRL
mfspr r7, SPRN_TBRU
#endif
1: MFTBU(r5)
MFTBL(r6)
MFTBU(r7)
cmpw 0,r5,r7
bne 1b /* Get [synced] base time */
addc r9,r6,r4 /* Compute end time */
addze r8,r5
#ifdef CONFIG_8xx
2: mftbu r5
#else
2: mfspr r5, SPRN_TBRU
#endif
2: MFTBU(r5)
cmpw 0,r5,r8
blt 2b
bgt 3f
#ifdef CONFIG_8xx
mftb r6
#else
mfspr r6, SPRN_TBRL
#endif
MFTBL(r6)
cmpw 0,r6,r9
blt 2b
3: blr

1
arch/powerpc/configs/40x/acadia_defconfig
View File

@ -64,4 +64,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/40x/ep405_defconfig
View File

@ -64,4 +64,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/40x/kilauea_defconfig
View File

@ -72,4 +72,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/40x/klondike_defconfig
View File

@ -26,7 +26,6 @@ CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set

1
arch/powerpc/configs/40x/makalu_defconfig
View File

@ -62,4 +62,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/40x/obs600_defconfig
View File

@ -72,4 +72,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

3
arch/powerpc/configs/40x/virtex_defconfig
View File

@ -41,9 +41,9 @@ CONFIG_NETDEVICES=y
CONFIG_SERIO_XILINX_XPS_PS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_XILINX_HWICAP=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
@ -74,4 +74,3 @@ CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/40x/walnut_defconfig
View File

@ -57,4 +57,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/44x/akebono_defconfig
View File

@ -123,7 +123,6 @@ CONFIG_NLS_DEFAULT="n"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_XMON=y
@ -135,5 +134,4 @@ CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1_PPC=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

1
arch/powerpc/configs/44x/bamboo_defconfig
View File

@ -55,4 +55,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/44x/currituck_defconfig
View File

@ -81,7 +81,6 @@ CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NLS_DEFAULT="n"
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_XMON=y
@ -94,5 +93,4 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

1
arch/powerpc/configs/44x/ebony_defconfig
View File

@ -59,5 +59,4 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

4
arch/powerpc/configs/44x/eiger_defconfig
View File

@ -84,18 +84,14 @@ CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

3
arch/powerpc/configs/44x/fsp2_defconfig
View File

@ -92,8 +92,10 @@ CONFIG_MMC_DEBUG=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ARASAN=y
CONFIG_MMC_SDHCI_ST=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RESET_CONTROLLER=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
@ -115,7 +117,6 @@ CONFIG_PRINTK_TIME=y
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=3
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_CRYPTO_CBC=y

3
arch/powerpc/configs/44x/icon_defconfig
View File

@ -47,8 +47,6 @@ CONFIG_FUSION_LOGGING=y
CONFIG_NETDEVICES=y
CONFIG_IBM_EMAC=y
# CONFIG_WLAN is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
# CONFIG_MOUSE_PS2_ALPS is not set
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
@ -94,4 +92,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/44x/iss476-smp_defconfig
View File

@ -63,7 +63,6 @@ CONFIG_TMPFS=y
CONFIG_CRAMFS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_PPC_EARLY_DEBUG=y
@ -72,5 +71,4 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

1
arch/powerpc/configs/44x/katmai_defconfig
View File

@ -60,4 +60,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/44x/rainier_defconfig
View File

@ -66,4 +66,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/44x/redwood_defconfig
View File

@ -83,18 +83,14 @@ CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/44x/sequoia_defconfig
View File

@ -67,4 +67,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/44x/taishan_defconfig
View File

@ -61,4 +61,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

3
arch/powerpc/configs/44x/virtex5_defconfig
View File

@ -40,9 +40,9 @@ CONFIG_NETDEVICES=y
CONFIG_SERIO_XILINX_XPS_PS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_XILINX_HWICAP=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
@ -73,4 +73,3 @@ CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/44x/warp_defconfig
View File

@ -97,4 +97,3 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/52xx/cm5200_defconfig
View File

@ -77,4 +77,3 @@ CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

3
arch/powerpc/configs/52xx/lite5200b_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_LITE5200=y
# CONFIG_PPC_PMAC is not set
CONFIG_GEN_RTC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -44,7 +45,6 @@ CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -62,4 +62,3 @@ CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set

19
arch/powerpc/configs/52xx/motionpro_defconfig
View File

@ -41,16 +41,16 @@ CONFIG_ATA=y
CONFIG_PATA_MPC52xx=y
CONFIG_NETDEVICES=y
CONFIG_FEC_MPC52xx=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_BROADCOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LXT_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
@ -90,4 +90,3 @@ CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/52xx/tqm5200_defconfig
View File

@ -48,7 +48,6 @@ CONFIG_PATA_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_FEC_MPC52xx=y
CONFIG_LXT_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
@ -92,4 +91,3 @@ CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/83xx/asp8347_defconfig
View File

@ -42,7 +42,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -71,4 +70,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/83xx/kmeter1_defconfig
View File

@ -55,7 +55,6 @@ CONFIG_HDLC=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y

3
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
View File

@ -48,8 +48,6 @@ CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
CONFIG_CICADA_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -87,4 +85,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
View File

@ -47,7 +47,6 @@ CONFIG_MD_RAID1=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -85,4 +84,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/83xx/mpc832x_mds_defconfig
View File

@ -14,7 +14,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC832x_MDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
CONFIG_NET=y
@ -36,7 +35,6 @@ CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_UCC_GETH=y
CONFIG_DAVICOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -50,6 +48,7 @@ CONFIG_I2C_MPC=y
CONFIG_WATCHDOG=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_QUICC_ENGINE=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -59,4 +58,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

6
arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
View File

@ -14,7 +14,7 @@ CONFIG_LDM_PARTITION=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC832x_RDB=y
CONFIG_QUICC_ENGINE=y
CONFIG_GEN_RTC=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
CONFIG_NET=y
@ -38,7 +38,6 @@ CONFIG_NETDEVICES=y
CONFIG_UCC_GETH=y
CONFIG_E1000=y
CONFIG_ICPLUS_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -46,7 +45,6 @@ CONFIG_ICPLUS_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -62,6 +60,7 @@ CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SPI=y
CONFIG_QUICC_ENGINE=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_MSDOS_FS=y
@ -78,4 +77,3 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_CRC_T10DIF=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/83xx/mpc834x_itx_defconfig
View File

@ -49,7 +49,6 @@ CONFIG_MD_RAID1=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_CICADA_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
@ -84,4 +83,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRC_T10DIF=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
View File

@ -75,4 +75,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRC_T10DIF=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/83xx/mpc834x_mds_defconfig
View File

@ -35,7 +35,6 @@ CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -58,4 +57,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/83xx/mpc836x_mds_defconfig
View File

@ -14,7 +14,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC836x_MDS=y
CONFIG_QUICC_ENGINE=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
@ -41,7 +40,6 @@ CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_UCC_GETH=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -55,6 +53,7 @@ CONFIG_I2C_MPC=y
CONFIG_WATCHDOG=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_QUICC_ENGINE=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -64,4 +63,3 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

5
arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
View File

@ -12,7 +12,6 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC836x_RDK=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_PCI=y
CONFIG_NET=y
@ -39,11 +38,9 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_NETDEVICES=y
CONFIG_UCC_GETH=y
CONFIG_BROADCOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_QE=y
@ -63,6 +60,7 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_QUICC_ENGINE=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -72,4 +70,3 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/83xx/mpc837x_mds_defconfig
View File

@ -11,6 +11,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC837x_MDS=y
CONFIG_GEN_RTC=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
@ -35,7 +36,6 @@ CONFIG_SATA_FSL=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -43,7 +43,6 @@ CONFIG_MARVELL_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -58,4 +57,3 @@ CONFIG_ROOT_NFS=y
CONFIG_CRC_T10DIF=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

5
arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
View File

@ -11,6 +11,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_MPC837x_RDB=y
CONFIG_GEN_RTC=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
@ -41,9 +42,7 @@ CONFIG_MD_RAID456=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -51,7 +50,6 @@ CONFIG_INPUT_FF_MEMLESS=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -86,4 +84,3 @@ CONFIG_CRC_T10DIF=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/83xx/sbc834x_defconfig
View File

@ -11,6 +11,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_83xx=y
CONFIG_SBC834x=y
CONFIG_GEN_RTC=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
@ -41,7 +42,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_BROADCOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -52,7 +52,6 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -72,5 +71,4 @@ CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

3
arch/powerpc/configs/85xx/ge_imp3a_defconfig
View File

@ -22,7 +22,6 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_GE_IMP3A=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_HIGHMEM=y
@ -161,6 +160,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RX8581=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
CONFIG_QUICC_ENGINE=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@ -233,5 +233,4 @@ CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_TALITOS=y

4
arch/powerpc/configs/85xx/ksi8560_defconfig
View File

@ -8,6 +8,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_KSI8560=y
CONFIG_CPM2=y
CONFIG_GEN_RTC=y
CONFIG_HIGHMEM=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
@ -39,14 +40,12 @@ CONFIG_FS_ENET=y
CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -57,4 +56,3 @@ CONFIG_DEBUG_FS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/mpc8540_ads_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_MPC8540_ADS=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_SECCOMP is not set
@ -30,7 +31,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -38,7 +38,6 @@ CONFIG_GIANFAR=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -47,4 +46,3 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

6
arch/powerpc/configs/85xx/mpc8560_ads_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_MPC8560_ADS=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_SECCOMP is not set
@ -32,16 +33,14 @@ CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_GIANFAR=y
CONFIG_E1000=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -50,4 +49,3 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_MPC85xx_CDS=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_SECCOMP is not set
@ -35,7 +36,6 @@ CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E1000=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -43,7 +43,6 @@ CONFIG_E1000=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -52,4 +51,3 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/sbc8548_defconfig
View File

@ -6,6 +6,7 @@ CONFIG_EXPERT=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_SBC8548=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
# CONFIG_SECCOMP is not set
@ -36,7 +37,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_BROADCOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -44,10 +44,8 @@ CONFIG_BROADCOM_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_USB_SUPPORT is not set
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

3
arch/powerpc/configs/85xx/socrates_defconfig
View File

@ -42,8 +42,6 @@ CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@ -86,4 +84,3 @@ CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_FONTS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

3
arch/powerpc/configs/85xx/stx_gp3_defconfig
View File

@ -39,8 +39,6 @@ CONFIG_SCSI_CONSTANTS=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_VT is not set
@ -68,4 +66,3 @@ CONFIG_CRC_T10DIF=m
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_BDI_SWITCH=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/tqm8540_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_TQM8540=y
CONFIG_GEN_RTC=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
CONFIG_NET=y
@ -35,14 +36,12 @@ CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -56,4 +55,3 @@ CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/tqm8541_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_TQM8541=y
CONFIG_GEN_RTC=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
CONFIG_NET=y
@ -35,7 +36,6 @@ CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -44,7 +44,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -58,4 +57,3 @@ CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/85xx/tqm8548_defconfig
View File

@ -43,7 +43,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -66,4 +65,3 @@ CONFIG_ROOT_NFS=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/tqm8555_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_TQM8555=y
CONFIG_GEN_RTC=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
CONFIG_NET=y
@ -35,7 +36,6 @@ CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -44,7 +44,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -58,4 +57,3 @@ CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/85xx/tqm8560_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_TQM8560=y
CONFIG_GEN_RTC=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
CONFIG_NET=y
@ -35,7 +36,6 @@ CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_NETDEVICES=y
CONFIG_GIANFAR=y
CONFIG_E100=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -44,7 +44,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
@ -58,4 +57,3 @@ CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

5
arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
View File

@ -54,7 +54,6 @@ CONFIG_IP_PIMSM_V2=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
@ -86,7 +85,6 @@ CONFIG_DUMMY=y
CONFIG_GIANFAR=y
CONFIG_E1000=y
CONFIG_BROADCOM_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO_LIBPS2=y
@ -107,8 +105,8 @@ CONFIG_SENSORS_LM90=y
CONFIG_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_MON=y
CONFIG_USB_ISP1760=y
CONFIG_USB_STORAGE=y
CONFIG_USB_ISP1760=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_PCA955X=y
@ -143,4 +141,3 @@ CONFIG_DETECT_HUNG_TASK=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

2
arch/powerpc/configs/adder875_defconfig
View File

@ -12,6 +12,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_PPC_ADDER875=y
CONFIG_8xx_COPYBACK=y
CONFIG_GEN_RTC=y
CONFIG_HZ_1000=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
@ -41,7 +42,6 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_USB_SUPPORT is not set

2
arch/powerpc/configs/amigaone_defconfig
View File

@ -45,7 +45,6 @@ CONFIG_PARPORT_PC_FIFO=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
@ -120,5 +119,4 @@ CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

1
arch/powerpc/configs/be.config Normal file
View File

@ -0,0 +1 @@
CONFIG_CPU_BIG_ENDIAN=y

5
arch/powerpc/configs/c2k_defconfig
View File

@ -27,6 +27,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_GEN_RTC=y
CONFIG_HIGHMEM=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BINFMT_MISC=y
@ -197,7 +198,6 @@ CONFIG_TUN=m
# CONFIG_ATM_DRIVERS is not set
CONFIG_MV643XX_ETH=y
CONFIG_VITESSE_PHY=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@ -209,7 +209,6 @@ CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_MPSC=y
CONFIG_SERIAL_MPSC_CONSOLE=y
CONFIG_NVRAM=m
CONFIG_GEN_RTC=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_I2C=m
@ -390,7 +389,6 @@ CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
@ -402,4 +400,3 @@ CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

9
arch/powerpc/configs/cell_defconfig
View File

@ -4,7 +4,6 @@ CONFIG_ALTIVEC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -34,10 +33,10 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=m
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PPC_64K_PAGES=y
CONFIG_SCHED_SMT=y
CONFIG_PCIEPORTBUS=y
@ -53,7 +52,6 @@ CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_IPV6=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
@ -141,7 +139,6 @@ CONFIG_SKY2=m
CONFIG_GELIC_NET=m
CONFIG_GELIC_WIRELESS=y
CONFIG_SPIDER_NET=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO_I8042 is not set
@ -149,8 +146,6 @@ CONFIG_SPIDER_NET=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_TXX9_NR_UARTS=2
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_HVC_RTAS=y
CONFIG_IPMI_HANDLER=m
@ -159,7 +154,6 @@ CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
@ -207,7 +201,6 @@ CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y

3
arch/powerpc/configs/chrp32_defconfig
View File

@ -16,6 +16,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
# CONFIG_PPC_PMAC is not set
CONFIG_GEN_RTC=y
CONFIG_HIGHMEM=y
CONFIG_BINFMT_MISC=y
CONFIG_IRQ_ALL_CPUS=y
@ -79,7 +80,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
@ -124,5 +124,4 @@ CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

1
arch/powerpc/configs/ep8248e_defconfig
View File

@ -70,5 +70,4 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

2
arch/powerpc/configs/ep88xc_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_PPC_EP88XC=y
CONFIG_8xx_COPYBACK=y
CONFIG_GEN_RTC=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
@ -45,7 +46,6 @@ CONFIG_LXT_PHY=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set

11
arch/powerpc/configs/g5_defconfig
View File

@ -4,7 +4,6 @@ CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -25,6 +24,7 @@ CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_PMAC64=y
CONFIG_GEN_RTC=y
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PCI_MSI=y
@ -115,7 +115,6 @@ CONFIG_USB_USBNET=m
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@ -123,7 +122,6 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_RAW_DRIVER=y
CONFIG_I2C_CHARDEV=y
CONFIG_AGP=m
@ -213,20 +211,20 @@ CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_FS_DAX=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_FS_DAX=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
@ -254,14 +252,12 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_CRC_T10DIF=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
@ -276,5 +272,4 @@ CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

2
arch/powerpc/configs/gamecube_defconfig
View File

@ -45,7 +45,6 @@ CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_NETDEVICES=y
# CONFIG_WLAN is not set
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
@ -54,7 +53,6 @@ CONFIG_INPUT_JOYSTICK=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_DEVKMEM is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_FB=y

3
arch/powerpc/configs/holly_defconfig
View File

@ -11,6 +11,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_PPC_HOLLY=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
@ -37,7 +38,6 @@ CONFIG_NETDEVICES=y
CONFIG_VORTEX=y
CONFIG_TSI108_ETH=y
CONFIG_PHYLIB=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -49,7 +49,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y

3
arch/powerpc/configs/linkstation_defconfig
View File

@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
@ -79,7 +78,6 @@ CONFIG_NET_TULIP=y
CONFIG_TULIP=y
CONFIG_TULIP_MMIO=y
CONFIG_R8169=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@ -142,4 +140,3 @@ CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

9
arch/powerpc/configs/maple_defconfig
View File

@ -3,7 +3,6 @@ CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
@ -24,6 +23,7 @@ CONFIG_MAC_PARTITION=y
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_MAPLE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PCI_MSI=y
@ -53,9 +53,6 @@ CONFIG_AMD8111_ETH=y
CONFIG_TIGON3=y
CONFIG_E1000=y
CONFIG_USB_PEGASUS=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -63,7 +60,6 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_HVC_RTAS=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_AMD8111=y
@ -100,8 +96,8 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_TI=m
CONFIG_EXT2_FS=y
CONFIG_FS_DAX=y
CONFIG_EXT4_FS=y
CONFIG_FS_DAX=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
@ -127,5 +123,4 @@ CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

2
arch/powerpc/configs/mgcoge_defconfig
View File

@ -46,7 +46,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_FS_ENET=y
CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_FIXED_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
@ -83,5 +82,4 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

34
arch/powerpc/configs/mpc512x_defconfig
View File

@ -12,6 +12,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_MPC512x=y
CONFIG_MPC512x_LPBFIFO=y
CONFIG_MPC5121_ADS=y
CONFIG_MPC512x_GENERIC=y
CONFIG_PDM360NG=y
@ -61,25 +62,22 @@ CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_NETDEVICES=y
CONFIG_FS_ENET=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_BROADCOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_LXT_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_STE10XP=y
CONFIG_VITESSE_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
@ -111,10 +109,9 @@ CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_MPC5121=y
CONFIG_DMADEVICES=y
CONFIG_MPC512X_DMA=y
CONFIG_MPC512x_LPBFIFO=y
CONFIG_FS_DAX=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_FS_DAX=y
# CONFIG_DNOTIFY is not set
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
@ -126,5 +123,4 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

4
arch/powerpc/configs/mpc5200_defconfig
View File

@ -50,7 +50,6 @@ CONFIG_NETDEVICES=y
CONFIG_FEC_MPC52xx=y
CONFIG_AMD_PHY=y
CONFIG_LXT_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -71,12 +70,10 @@ CONFIG_SENSORS_LM87=m
CONFIG_WATCHDOG=y
CONFIG_MFD_SM501=m
CONFIG_DRM=y
CONFIG_FB=y
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_RADEON=y
CONFIG_FB_SM501=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_SOUND=y
CONFIG_SND=y
@ -130,4 +127,3 @@ CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/mpc7448_hpc2_defconfig
View File

@ -11,6 +11,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_MPC7448HPC2=y
CONFIG_GEN_RTC=y
CONFIG_BINFMT_MISC=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
@ -38,7 +39,6 @@ CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_TSI108_ETH=y
CONFIG_PHYLIB=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -46,7 +46,6 @@ CONFIG_PHYLIB=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -54,4 +53,3 @@ CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

1
arch/powerpc/configs/mpc8272_ads_defconfig
View File

@ -77,5 +77,4 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

10
arch/powerpc/configs/mpc83xx_defconfig
View File

@ -21,7 +21,6 @@ CONFIG_MPC837x_MDS=y
CONFIG_MPC837x_RDB=y
CONFIG_SBC834x=y
CONFIG_ASP834x=y
CONFIG_QUICC_ENGINE=y
CONFIG_QE_GPIO=y
CONFIG_MATH_EMULATION=y
CONFIG_PCI=y
@ -60,13 +59,11 @@ CONFIG_SATA_SIL=y
CONFIG_NETDEVICES=y
CONFIG_UCC_GETH=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MARVELL_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -99,6 +96,7 @@ CONFIG_USB_EHCI_FSL=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_QUICC_ENGINE=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_PROC_KCORE=y
@ -109,7 +107,5 @@ CONFIG_ROOT_NFS=y
CONFIG_CRC_T10DIF=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_TALITOS=y

4
arch/powerpc/configs/mpc866_ads_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_MPC86XADS=y
CONFIG_8xx_COPYBACK=y
CONFIG_8xx_CPU6=y
CONFIG_GEN_RTC=y
CONFIG_HZ_1000=y
CONFIG_MATH_EMULATION=y
# CONFIG_SECCOMP is not set
@ -28,12 +29,10 @@ CONFIG_SYN_COOKIES=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_NETDEVICES=y
CONFIG_FS_ENET=y
CONFIG_FIXED_PHY=y
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT4_FS=y
@ -43,4 +42,3 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_CRC_CCITT=y
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

12
arch/powerpc/configs/mpc86xx_basic_defconfig
View File

@ -1,11 +1,11 @@
CONFIG_HIGHMEM=y
CONFIG_KEXEC=y
CONFIG_PPC_86xx=y
CONFIG_PROC_KCORE=y
CONFIG_MPC8641_HPCN=y
CONFIG_SBC8641D=y
CONFIG_MPC8610_HPCD=y
CONFIG_GEF_PPC9A=y
CONFIG_GEF_SBC310=y
CONFIG_GEF_SBC610=y
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8641_HPCN=y
CONFIG_SBC8641D=y
CONFIG_MVME7100=y
CONFIG_HIGHMEM=y
CONFIG_KEXEC=y
CONFIG_PROC_KCORE=y

2
arch/powerpc/configs/mpc885_ads_defconfig
View File

@ -13,6 +13,7 @@ CONFIG_EXPERT=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_8xx_COPYBACK=y
CONFIG_GEN_RTC=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
@ -51,7 +52,6 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_GEN_RTC=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set

3
arch/powerpc/configs/mvme5100_defconfig
View File

@ -35,7 +35,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
@ -70,7 +69,6 @@ CONFIG_TUN=m
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_E100=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
@ -130,4 +128,3 @@ CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

5
arch/powerpc/configs/pasemi_defconfig
View File

@ -3,7 +3,6 @@ CONFIG_ALTIVEC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SYSVIPC=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
@ -145,6 +144,7 @@ CONFIG_EDAC=y
CONFIG_EDAC_PASEMI=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RAS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@ -167,7 +167,6 @@ CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
@ -175,7 +174,5 @@ CONFIG_DETECT_HUNG_TASK=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

11
arch/powerpc/configs/pmac32_defconfig
View File

@ -21,6 +21,7 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_PMAC=y
CONFIG_PPC601_SYNC_FIX=y
CONFIG_GEN_RTC=y
CONFIG_HIGHMEM=y
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
@ -179,10 +180,10 @@ CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=m
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_PRISM54=m
CONFIG_B43=m
CONFIG_B43LEGACY=m
CONFIG_P54_COMMON=m
CONFIG_PRISM54=m
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
@ -193,7 +194,6 @@ CONFIG_SERIAL_8250=m
CONFIG_SERIAL_PMACZILOG=m
CONFIG_SERIAL_PMACZILOG_TTYS=y
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
CONFIG_I2C_CHARDEV=m
CONFIG_APM_POWER=y
CONFIG_BATTERY_PMU=y
@ -201,8 +201,9 @@ CONFIG_HWMON=m
CONFIG_AGP=m
CONFIG_AGP_UNINORTH=m
CONFIG_DRM=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_LEGACY=y
CONFIG_DRM_R128=m
CONFIG_FB=y
CONFIG_FB_OF=y
CONFIG_FB_CONTROL=y
@ -300,8 +301,6 @@ CONFIG_NFSD_V4=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=m
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
@ -310,7 +309,6 @@ CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_BOOTX_TEXT=y
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_SHA512=m
@ -325,4 +323,3 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set

18
arch/powerpc/configs/powernv_defconfig
View File

@ -1,10 +1,8 @@
CONFIG_PPC64=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2048
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
@ -26,8 +24,8 @@ CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_USER_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_BPF_SYSCALL=y
@ -62,7 +60,6 @@ CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_PM=y
CONFIG_PCI_MSI=y
CONFIG_HOTPLUG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
@ -158,7 +155,6 @@ CONFIG_NETCONSOLE=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_VHOST_NET=m
CONFIG_VORTEX=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
@ -184,16 +180,13 @@ CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_MISC=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_POWERNV_OP_PANEL=m
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_POWERNV=y
@ -296,9 +289,12 @@ CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_LATENCYTOP=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENT=y
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
@ -310,6 +306,7 @@ CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_CRC32C_VPMSUM=m
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1_PPC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
@ -318,14 +315,13 @@ CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SHA1_PPC=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_DEV_VMX=y
CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=m
CONFIG_VHOST_NET=m

3
arch/powerpc/configs/ppc40x_defconfig
View File

@ -51,9 +51,9 @@ CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_XILINX_HWICAP=m
CONFIG_I2C=m
@ -85,4 +85,3 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

4
arch/powerpc/configs/ppc44x_defconfig
View File

@ -68,9 +68,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_XILINX_HWICAP=m
CONFIG_I2C=m
@ -94,7 +94,6 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=m
CONFIG_LOGFS=m
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
@ -108,6 +107,5 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_VIRTUALIZATION=y

38
arch/powerpc/configs/ppc64_defconfig
View File

@ -1,8 +1,6 @@
CONFIG_PPC64=y
CONFIG_SMP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
@ -28,9 +26,10 @@ CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_PPC_SPLPAR=y
CONFIG_DTL=y
CONFIG_SCANLOG=m
CONFIG_PPC_SMLPAR=y
CONFIG_DTL=y
CONFIG_IBMEBUS=y
CONFIG_PPC_MAPLE=y
CONFIG_PPC_PASEMI=y
CONFIG_PPC_PASEMI_IOMMU=y
@ -41,9 +40,8 @@ CONFIG_PS3_FLASH=m
CONFIG_PS3_LPM=m
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_RTAS_FLASH=m
CONFIG_IBMEBUS=y
CONFIG_CPU_FREQ_PMAC64=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_PMAC64=y
CONFIG_HZ_100=y
CONFIG_BINFMT_MISC=m
CONFIG_PPC_TRANSACTIONAL_MEM=y
@ -51,14 +49,15 @@ CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_PPC_64K_PAGES=y
CONFIG_SCHED_SMT=y
CONFIG_PCCARD=y
CONFIG_ELECTRA_CF=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_PCCARD=y
CONFIG_ELECTRA_CF=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -154,7 +153,6 @@ CONFIG_DUMMY=m
CONFIG_NETCONSOLE=y
CONFIG_TUN=m
CONFIG_VIRTIO_NET=m
CONFIG_VHOST_NET=m
CONFIG_VORTEX=m
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
@ -181,15 +179,14 @@ CONFIG_SUNGEM=y
CONFIG_GELIC_NET=m
CONFIG_GELIC_WIRELESS=y
CONFIG_SPIDER_NET=m
CONFIG_MARVELL_PHY=y
CONFIG_BROADCOM_PHY=m
CONFIG_MARVELL_PHY=y
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
@ -197,7 +194,6 @@ CONFIG_INPUT_PCSPKR=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_RTAS=y
@ -250,6 +246,9 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_POWERNV=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
@ -267,7 +266,7 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_FS_DAX=y
CONFIG_RAS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@ -287,6 +286,7 @@ CONFIG_XFS_POSIX_ACL=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FS_DAX=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_OVERLAY_FS=m
@ -328,9 +328,11 @@ CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENT=y
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
@ -343,6 +345,7 @@ CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_CRC32C_VPMSUM=m
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1_PPC=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
@ -351,19 +354,14 @@ CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SHA1_PPC=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
CONFIG_CRYPTO_DEV_VMX=y
CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_POWERNV=m
CONFIG_VHOST_NET=m

10
arch/powerpc/configs/ppc64e_defconfig
View File

@ -3,7 +3,6 @@ CONFIG_PPC_BOOK3E_64=y
CONFIG_SMP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
@ -30,8 +29,8 @@ CONFIG_BINFMT_MISC=m
CONFIG_IRQ_ALL_CPUS=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_PCI_MSI=y
CONFIG_PCCARD=y
CONFIG_HOTPLUG_PCI=y
CONFIG_PCCARD=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -108,15 +107,14 @@ CONFIG_E100=y
CONFIG_E1000=y
CONFIG_IXGB=m
CONFIG_SUNGEM=y
CONFIG_MARVELL_PHY=y
CONFIG_BROADCOM_PHY=m
CONFIG_MARVELL_PHY=y
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_MISC=y
# CONFIG_SERIO_SERPORT is not set
@ -172,10 +170,8 @@ CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_FS_DAX=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@ -192,6 +188,7 @@ CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_FS_DAX=y
CONFIG_AUTOFS4_FS=m
CONFIG_ISO9660_FS=y
CONFIG_UDF_FS=m
@ -251,5 +248,4 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set

Some files were not shown because too many files have changed in this diff Show More