tty: serial: samsung: add byte-order aware bit functions

This driver makes use of the __set_bit() and __clear_bit() functions.
When running under big-endian, these functions don't convert the bit
indexes when working with peripheral registers, leading to the
incorrect bits being set and cleared when running big-endian.

Add two new driver functions for setting and clearing bits that are
byte-order aware.

Signed-off-by: Matthew Leach <matthew@mattleach.net>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Matthew Leach 2016-06-22 17:57:03 +01:00 committed by Greg Kroah-Hartman
parent e37697b3f7
commit bbb5ff9122
2 changed files with 35 additions and 9 deletions

View File

@ -169,8 +169,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
return;
if (s3c24xx_serial_has_interrupt_mask(port))
__set_bit(S3C64XX_UINTM_TXD,
portaddrl(port, S3C64XX_UINTM));
s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
else
disable_irq_nosync(ourport->tx_irq);
@ -235,8 +234,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
/* Mask Tx interrupt */
if (s3c24xx_serial_has_interrupt_mask(port))
__set_bit(S3C64XX_UINTM_TXD,
portaddrl(port, S3C64XX_UINTM));
s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
else
disable_irq_nosync(ourport->tx_irq);
@ -269,8 +267,8 @@ static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
/* Unmask Tx interrupt */
if (s3c24xx_serial_has_interrupt_mask(port))
__clear_bit(S3C64XX_UINTM_TXD,
portaddrl(port, S3C64XX_UINTM));
s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
S3C64XX_UINTM);
else
enable_irq(ourport->tx_irq);
@ -397,8 +395,8 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
if (s3c24xx_serial_has_interrupt_mask(port))
__set_bit(S3C64XX_UINTM_RXD,
portaddrl(port, S3C64XX_UINTM));
s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
S3C64XX_UINTM);
else
disable_irq_nosync(ourport->rx_irq);
rx_enabled(port) = 0;
@ -1069,7 +1067,7 @@ static int s3c64xx_serial_startup(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
/* Enable Rx Interrupt */
__clear_bit(S3C64XX_UINTM_RXD, portaddrl(port, S3C64XX_UINTM));
s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
dbg("s3c64xx_serial_startup ok\n");
return ret;

View File

@ -123,4 +123,32 @@ struct s3c24xx_uart_port {
#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
/* Byte-order aware bit setting/clearing functions. */
static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
unsigned int reg)
{
unsigned long flags;
u32 val;
local_irq_save(flags);
val = rd_regl(port, reg);
val |= (1 << idx);
wr_regl(port, reg, val);
local_irq_restore(flags);
}
static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
unsigned int reg)
{
unsigned long flags;
u32 val;
local_irq_save(flags);
val = rd_regl(port, reg);
val &= ~(1 << idx);
wr_regl(port, reg, val);
local_irq_restore(flags);
}
#endif