OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits)
  alim15x3: remove redundant m5229_revision check
  sc1200: fix ->dma_base equal zero handling
  cs5520: fix ->dma_base equal zero handling
  sgiioc4: add missing ->dma_base check
  cs5535: add missing ->dma_base check
  ide: remove CONFIG_IDEDMA_IVB config option
  ide: change master/slave IDENTIFY order
  ide: move ide_config_drive_speed() calls to upper layers (take 2)
  pdc202xx_new: check ide_config_drive_speed() return value
  cs5535: check ide_config_drive_speed() return value
  amd74xx/via82cxxx: check ide_config_drive_speed() return value
  au1xxx: fix au1xxx_set_pio_mode()
  icside: use ide_tune_dma()
  ide-pmac: fix PIO setup and enable autotune
  ide-pmac: use ide_tune_dma() (take 2)
  ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  ide-pmac: use __ide_wait_stat()
  ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()
  ide: add __ide_wait_stat() helper
  ...
This commit is contained in:
Linus Torvalds 2007-10-13 10:13:27 -07:00
parent c8c55bcb43 99149a4859
commit bcd11eaa22
41 changed files with 482 additions and 987 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
drivers/ide/Kconfig
View File

@ -1074,22 +1074,6 @@ endif
config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
config IDEDMA_IVB
bool "IGNORE word93 Validation BITS"
depends on BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
---help---
There are unclear terms in ATA-4 and ATA-5 standards how certain
hardware (an 80c ribbon) should be detected. Different interpretations
of the standards have been released in hardware. This causes problems:
for example, a host with Ultra Mode 4 (or higher) will not run
in that mode with an 80c ribbon.
If you are experiencing compatibility or performance problems, you
MAY try to answer Y here. However, it does not necessarily solve
any of your problems, it could even cause more of them.
It is normally safe to answer Y; however, the default is N.
endif
config BLK_DEV_HD_ONLY

45
drivers/ide/arm/icside.c
View File

@ -248,7 +248,7 @@ static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
* MW1 80 50 50 150 C
* MW2 70 25 25 120 C
*/
static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
{
int cycle_time, use_dma_info = 0;
@ -273,7 +273,7 @@ static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
cycle_time = 480;
break;
default:
return 1;
return;
}
/*
@ -287,8 +287,6 @@ static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
printk("%s: %s selected (peak %dMB/s)\n", drive->name,
ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
return ide_config_drive_speed(drive, xfer_mode);
}
static void icside_dma_host_off(ide_drive_t *drive)
@ -313,41 +311,10 @@ static int icside_dma_on(ide_drive_t *drive)
static int icside_dma_check(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
int xfer_mode = 0;
if (ide_tune_dma(drive))
return 0;
if (!(id->capability & 1) || !hwif->autodma)
goto out;
/*
* Consult the list of known "bad" drives
*/
if (__ide_dma_bad_drive(drive))
goto out;
/*
* Enable DMA on any drive that has multiword DMA
*/
if (id->field_valid & 2) {
xfer_mode = ide_max_dma_mode(drive);
goto out;
}
/*
* Consult the list of known "good" drives
*/
if (__ide_dma_good_drive(drive)) {
if (id->eide_dma_time > 150)
goto out;
xfer_mode = XFER_MW_DMA_1;
}
out:
if (xfer_mode == 0)
return -1;
return icside_set_speed(drive, xfer_mode) ? -1 : 0;
return -1;
}
static int icside_dma_end(ide_drive_t *drive)
@ -464,7 +431,7 @@ static void icside_dma_init(ide_hwif_t *hwif)
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
hwif->speedproc = icside_set_speed;
hwif->set_dma_mode = icside_set_dma_mode;
hwif->autodma = 1;
hwif->ide_dma_check = icside_dma_check;

8
drivers/ide/cris/ide-cris.c
View File

@ -716,11 +716,9 @@ static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
cris_ide_set_speed(TYPE_PIO, setup, strobe, hold);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
int cyc = 0, dvs = 0, strobe = 0, hold = 0;
@ -759,8 +757,6 @@ static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0);
else
cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
return ide_config_drive_speed(drive, speed);
}
void __init
@ -791,7 +787,7 @@ init_e100_ide (void)
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->set_pio_mode = &cris_set_pio_mode;
hwif->speedproc = &speed_cris_ide;
hwif->set_dma_mode = &cris_set_dma_mode;
hwif->ata_input_data = &cris_ide_input_data;
hwif->ata_output_data = &cris_ide_output_data;
hwif->atapi_input_bytes = &cris_atapi_input_bytes;

1
drivers/ide/ide-acpi.c
View File

@ -649,7 +649,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
if (!on)
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
}
EXPORT_SYMBOL_GPL(ide_acpi_set_state);
/**
* ide_acpi_init - initialize the ACPI link for an IDE interface

28
drivers/ide/ide-dma.c
View File

@ -169,6 +169,11 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
EXPORT_SYMBOL_GPL(ide_dma_intr);
static int ide_dma_good_drive(ide_drive_t *drive)
{
return ide_in_drive_list(drive->id, drive_whitelist);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
* ide_build_sglist - map IDE scatter gather for DMA I/O
@ -357,7 +362,7 @@ static int config_drive_for_dma (ide_drive_t *drive)
return 0;
/* Consult the list of known "good" drives */
if (__ide_dma_good_drive(drive))
if (ide_dma_good_drive(drive))
return 0;
}
@ -639,14 +644,6 @@ int __ide_dma_bad_drive (ide_drive_t *drive)
EXPORT_SYMBOL(__ide_dma_bad_drive);
int __ide_dma_good_drive (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
return ide_in_drive_list(id, drive_whitelist);
}
EXPORT_SYMBOL(__ide_dma_good_drive);
static const u8 xfer_mode_bases[] = {
XFER_UDMA_0,
XFER_MW_DMA_0,
@ -746,6 +743,14 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
}
}
if (hwif->chipset == ide_acorn && mode == 0) {
/*
* is this correct?
*/
if (ide_dma_good_drive(drive) && drive->id->eide_dma_time < 150)
mode = XFER_MW_DMA_1;
}
printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
return min(mode, req_mode);
@ -769,7 +774,10 @@ int ide_tune_dma(ide_drive_t *drive)
if (!speed)
return 0;
if (drive->hwif->speedproc(drive, speed))
if (drive->hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
return 0;
if (ide_set_dma_mode(drive, speed))
return 0;
return 1;

10
drivers/ide/ide-io.c
View File

@ -836,9 +836,17 @@ static ide_startstop_t do_special (ide_drive_t *drive)
if (set_pio_mode_abuse(drive->hwif, req_pio)) {
if (hwif->set_pio_mode)
hwif->set_pio_mode(drive, req_pio);
} else
} else {
int keep_dma = drive->using_dma;
ide_set_pio(drive, req_pio);
if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
if (keep_dma)
hwif->ide_dma_on(drive);
}
}
return ide_stopped;
} else {
if (drive->media == ide_disk)

133
drivers/ide/ide-iops.c
View File

@ -472,58 +472,23 @@ int drive_is_ready (ide_drive_t *drive)
EXPORT_SYMBOL(drive_is_ready);
/*
* Global for All, and taken from ide-pmac.c. Can be called
* with spinlock held & IRQs disabled, so don't schedule !
*/
int wait_for_ready (ide_drive_t *drive, int timeout)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat = 0;
while(--timeout) {
stat = hwif->INB(IDE_STATUS_REG);
if (!(stat & BUSY_STAT)) {
if (drive->ready_stat == 0)
break;
else if ((stat & drive->ready_stat)||(stat & ERR_STAT))
break;
}
mdelay(1);
}
if ((stat & ERR_STAT) || timeout <= 0) {
if (stat & ERR_STAT) {
printk(KERN_ERR "%s: wait_for_ready, "
"error status: %x\n", drive->name, stat);
}
return 1;
}
return 0;
}
/*
* This routine busy-waits for the drive status to be not "busy".
* It then checks the status for all of the "good" bits and none
* of the "bad" bits, and if all is okay it returns 0. All other
* cases return 1 after invoking ide_error() -- caller should just return.
* cases return error -- caller may then invoke ide_error().
*
* This routine should get fixed to not hog the cpu during extra long waits..
* That could be done by busy-waiting for the first jiffy or two, and then
* setting a timer to wake up at half second intervals thereafter,
* until timeout is achieved, before timing out.
*/
int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout)
static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat;
int i;
ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
/* bail early if we've exceeded max_failures */
if (drive->max_failures && (drive->failures > drive->max_failures)) {
*startstop = ide_stopped;
return 1;
}
int i;
u8 stat;
udelay(1); /* spec allows drive 400ns to assert "BUSY" */
if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
@ -541,8 +506,8 @@ int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 b
break;
local_irq_restore(flags);
*startstop = ide_error(drive, "status timeout", stat);
return 1;
*rstat = stat;
return -EBUSY;
}
}
local_irq_restore(flags);
@ -556,11 +521,39 @@ int ide_wait_stat (ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 b
*/
for (i = 0; i < 10; i++) {
udelay(1);
if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad))
if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad)) {
*rstat = stat;
return 0;
}
}
*startstop = ide_error(drive, "status error", stat);
return 1;
*rstat = stat;
return -EFAULT;
}
/*
* In case of error returns error value after doing "*startstop = ide_error()".
* The caller should return the updated value of "startstop" in this case,
* "startstop" is unchanged when the function returns 0.
*/
int ide_wait_stat(ide_startstop_t *startstop, ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout)
{
int err;
u8 stat;
/* bail early if we've exceeded max_failures */
if (drive->max_failures && (drive->failures > drive->max_failures)) {
*startstop = ide_stopped;
return 1;
}
err = __ide_wait_stat(drive, good, bad, timeout, &stat);
if (err) {
char *s = (err == -EBUSY) ? "status timeout" : "status error";
*startstop = ide_error(drive, s, stat);
}
return err;
}
EXPORT_SYMBOL(ide_wait_stat);
@ -620,15 +613,10 @@ u8 eighty_ninty_three (ide_drive_t *drive)
/*
* FIXME:
* - change master/slave IDENTIFY order
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
#ifndef CONFIG_IDEDMA_IVB
if ((id->hw_config & 0x4000) || (ivb && (id->hw_config & 0x2000)))
#else
if (id->hw_config & 0x6000)
#endif
return 1;
no_80w:
@ -778,15 +766,10 @@ int ide_driveid_update (ide_drive_t *drive)
#endif
}
/*
* Similar to ide_wait_stat(), except it never calls ide_error internally.
*
* const char *msg == consider adding for verbose errors.
*/
int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
int i, error = 1;
ide_hwif_t *hwif = drive->hwif;
int error;
u8 stat;
// while (HWGROUP(drive)->busy)
@ -826,35 +809,10 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
if ((IDE_CONTROL_REG) && (drive->quirk_list == 2))
hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
udelay(1);
/*
* Wait for drive to become non-BUSY
*/
if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
unsigned long flags, timeout;
local_irq_set(flags);
timeout = jiffies + WAIT_CMD;
while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) {
if (time_after(jiffies, timeout))
break;
}
local_irq_restore(flags);
}
/*
* Allow status to settle, then read it again.
* A few rare drives vastly violate the 400ns spec here,
* so we'll wait up to 10usec for a "good" status
* rather than expensively fail things immediately.
* This fix courtesy of Matthew Faupel & Niccolo Rigacci.
*/
for (i = 0; i < 10; i++) {
udelay(1);
if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), drive->ready_stat, BUSY_STAT|DRQ_STAT|ERR_STAT)) {
error = 0;
break;
}
}
error = __ide_wait_stat(drive, drive->ready_stat,
BUSY_STAT|DRQ_STAT|ERR_STAT,
WAIT_CMD, &stat);
SELECT_MASK(drive, 0);
@ -899,9 +857,6 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
return error;
}
EXPORT_SYMBOL(ide_config_drive_speed);
/*
* This should get invoked any time we exit the driver to
* wait for an interrupt response from a drive. handler() points

78
drivers/ide/ide-lib.c
View File

@ -349,7 +349,7 @@ void ide_set_pio(ide_drive_t *drive, u8 req_pio)
drive->name, host_pio, req_pio,
req_pio == 255 ? "(auto-tune)" : "", pio);
hwif->set_pio_mode(drive, pio);
(void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
}
EXPORT_SYMBOL_GPL(ide_set_pio);
@ -378,39 +378,83 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
blk_queue_bounce_limit(drive->queue, addr);
}
int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
if (hwif->set_pio_mode == NULL)
return -1;
/*
* TODO: temporary hack for some legacy host drivers that didn't
* set transfer mode on the device in ->set_pio_mode method...
*/
if (hwif->set_dma_mode == NULL) {
hwif->set_pio_mode(drive, mode - XFER_PIO_0);
return 0;
}
if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
if (ide_config_drive_speed(drive, mode))
return -1;
hwif->set_pio_mode(drive, mode - XFER_PIO_0);
return 0;
} else {
hwif->set_pio_mode(drive, mode - XFER_PIO_0);
return ide_config_drive_speed(drive, mode);
}
}
int ide_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
if (hwif->set_dma_mode == NULL)
return -1;
if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) {
if (ide_config_drive_speed(drive, mode))
return -1;
hwif->set_dma_mode(drive, mode);
return 0;
} else {
hwif->set_dma_mode(drive, mode);
return ide_config_drive_speed(drive, mode);
}
}
EXPORT_SYMBOL_GPL(ide_set_dma_mode);
/**
* ide_set_xfer_rate - set transfer rate
* @drive: drive to set
* @speed: speed to attempt to set
* @rate: speed to attempt to set
*
* General helper for setting the speed of an IDE device. This
* function knows about user enforced limits from the configuration
* which speedproc() does not. High level drivers should never
* invoke speedproc() directly.
* which ->set_pio_mode/->set_dma_mode does not.
*/
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
{
ide_hwif_t *hwif = drive->hwif;
if (hwif->speedproc == NULL)
if (hwif->set_dma_mode == NULL)
return -1;
rate = ide_rate_filter(drive, rate);
if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) {
if (hwif->set_pio_mode)
hwif->set_pio_mode(drive, rate - XFER_PIO_0);
if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5)
return ide_set_pio_mode(drive, rate);
/*
* FIXME: this is incorrect to return zero here but
* since all users of ide_set_xfer_rate() ignore
* the return value it is not a problem currently
*/
return 0;
}
/*
* TODO: transfer modes 0x00-0x07 passed from the user-space are
* currently handled here which needs fixing (please note that such
* case could happen iff the transfer mode has already been set on
* the device by ide-proc.c::set_xfer_rate()).
*/
return hwif->speedproc(drive, rate);
return ide_set_dma_mode(drive, rate);
}
static void ide_dump_opcode(ide_drive_t *drive)

7
drivers/ide/ide-probe.c
View File

@ -719,9 +719,9 @@ EXPORT_SYMBOL_GPL(ide_undecoded_slave);
*/
static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
{
unsigned int unit;
unsigned long flags;
unsigned int irqd;
int unit;
if (hwif->noprobe)
return;
@ -777,10 +777,9 @@ static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
* Second drive should only exist if first drive was found,
* but a lot of cdrom drives are configured as single slaves.
* Need to probe slave device first to make it release PDIAG-.
*/
for (unit = 0; unit < MAX_DRIVES; ++unit) {
for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);

2
drivers/ide/ide.c
View File

@ -397,7 +397,7 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
#endif
hwif->set_pio_mode = tmp_hwif->set_pio_mode;
hwif->speedproc = tmp_hwif->speedproc;
hwif->set_dma_mode = tmp_hwif->set_dma_mode;
hwif->mdma_filter = tmp_hwif->mdma_filter;
hwif->udma_filter = tmp_hwif->udma_filter;
hwif->selectproc = tmp_hwif->selectproc;

2
drivers/ide/legacy/ide_platform.c
View File

@ -65,7 +65,7 @@ found:
hwif->hw.irq = hwif->irq = irq;
hwif->hw.dma = NO_DMA;
hwif->hw.chipset = ide_generic;
hwif->chipset = hwif->hw.chipset = ide_generic;
if (mmio) {
hwif->mmio = 1;

28
drivers/ide/mips/au1xxx-ide.c
View File

@ -101,12 +101,7 @@ void auide_outsw(unsigned long port, void *addr, u32 count)
static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int mem_sttime;
int mem_stcfg;
u8 speed;
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
/* set pio mode! */
switch(pio) {
@ -164,18 +159,11 @@ static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
au_writel(mem_sttime,MEM_STTIME2);
au_writel(mem_stcfg,MEM_STCFG2);
speed = pio + XFER_PIO_0;
ide_config_drive_speed(drive, speed);
}
static int auide_tune_chipset(ide_drive_t *drive, const u8 speed)
static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
int mem_sttime;
int mem_stcfg;
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2);
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
@ -211,16 +199,11 @@ static int auide_tune_chipset(ide_drive_t *drive, const u8 speed)
break;
#endif
default:
return 1;
return;
}
if (ide_config_drive_speed(drive, speed))
return 1;
au_writel(mem_sttime,MEM_STTIME2);
au_writel(mem_stcfg,MEM_STCFG2);
return 0;
}
/*
@ -682,6 +665,7 @@ static int au_ide_probe(struct device *dev)
#endif
hwif->pio_mask = ATA_PIO4;
hwif->host_flags = IDE_HFLAG_POST_SET_MODE;
hwif->noprobe = 0;
hwif->drives[0].unmask = 1;
@ -702,7 +686,7 @@ static int au_ide_probe(struct device *dev)
#endif
hwif->set_pio_mode = &au1xxx_set_pio_mode;
hwif->speedproc = &auide_tune_chipset;
hwif->set_dma_mode = &auide_set_dma_mode;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
hwif->dma_off_quietly = &auide_dma_off_quietly;

12
drivers/ide/pci/aec62xx.c
View File

@ -87,7 +87,7 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
return chipset_table->ultra_settings;
}
static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed)
static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -111,10 +111,9 @@ static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed)
tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
pci_write_config_byte(dev, 0x54, tmp2);
local_irq_restore(flags);
return(ide_config_drive_speed(drive, speed));
}
static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed)
static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -135,12 +134,11 @@ static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed)
tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
local_irq_restore(flags);
return(ide_config_drive_speed(drive, speed));
}
static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0);
}
static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
@ -205,9 +203,9 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
if(hwif->mate)
hwif->mate->serialized = hwif->serialized = 1;
hwif->speedproc = &aec6210_tune_chipset;
hwif->set_dma_mode = &aec6210_set_mode;
} else
hwif->speedproc = &aec6260_tune_chipset;
hwif->set_dma_mode = &aec6260_set_mode;
if (!hwif->dma_base) {
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;

56
drivers/ide/pci/alim15x3.c
View File

@ -283,14 +283,14 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
/**
* ali_tune_pio - set host controller for PIO mode
* ali_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Program the controller for the given PIO mode.
*/
static void ali_tune_pio(ide_drive_t *drive, const u8 pio)
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -357,21 +357,6 @@ static void ali_tune_pio(ide_drive_t *drive, const u8 pio)
*/
}
/**
* ali_set_pio_mode - set up drive for PIO mode
* @drive: drive to tune
* @pio: desired mode
*
* Program the controller with the desired PIO timing for the given drive.
* Then set up the drive itself.
*/
static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ali_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* ali_udma_filter - compute UDMA mask
* @drive: IDE device
@ -401,15 +386,14 @@ static u8 ali_udma_filter(ide_drive_t *drive)
}
/**
* ali15x3_tune_chipset - set up chipset/drive for new speed
* @drive: drive to configure for
* @speed: desired speed
* ali_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Configure the hardware for the desired IDE transfer mode.
* We also do the needed drive configuration through helpers
*/
static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed)
static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -419,7 +403,7 @@ static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed)
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
if (speed < XFER_PIO_0)
return 1;
return;
if (speed == XFER_UDMA_6)
speed1 = 0x47;
@ -450,7 +434,6 @@ static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, 0x4b, tmpbyte);
}
}
return (ide_config_drive_speed(drive, speed));
}
/**
@ -699,7 +682,7 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->set_pio_mode = &ali_set_pio_mode;
hwif->speedproc = &ali15x3_tune_chipset;
hwif->set_dma_mode = &ali_set_dma_mode;
hwif->udma_filter = &ali_udma_filter;
/* don't use LBA48 DMA on ALi devices before rev 0xC5 */
@ -711,6 +694,10 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
return;
}
/*
* check in ->init_dma guarantees m5229_revision >= 0x20 here
*/
if (m5229_revision > 0x20)
hwif->atapi_dma = 1;
@ -728,18 +715,15 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07;
if (m5229_revision >= 0x20) {
/*
* M1543C or newer for DMAing
*/
hwif->ide_dma_check = &ali15x3_config_drive_for_dma;
hwif->dma_setup = &ali15x3_dma_setup;
if (!noautodma)
hwif->autodma = 1;
hwif->ide_dma_check = &ali15x3_config_drive_for_dma;
hwif->dma_setup = &ali15x3_dma_setup;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_ali15x3(hwif);
if (!noautodma)
hwif->autodma = 1;
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = ata66_ali15x3(hwif);
}
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}

26
drivers/ide/pci/amd74xx.c
View File

@ -1,5 +1,5 @@
/*
* Version 2.22
* Version 2.23
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
@ -229,20 +229,16 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
}
/*
* amd_set_drive() computes timing values configures the drive and
* the chipset to a desired transfer mode. It also can be called
* by upper layers.
* amd_set_drive() computes timing values and configures the chipset
* to a desired transfer mode. It also can be called by upper layers.
*/
static int amd_set_drive(ide_drive_t *drive, const u8 speed)
static void amd_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct ide_timing t, p;
int T, UT;
if (speed != XFER_PIO_SLOW)
ide_config_drive_speed(drive, speed);
T = 1000000000 / amd_clock;
UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
@ -257,12 +253,6 @@ static int amd_set_drive(ide_drive_t *drive, const u8 speed)
if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
if (!drive->init_speed)
drive->init_speed = speed;
drive->current_speed = speed;
return 0;
}
/*
@ -399,7 +389,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &amd_set_pio_mode;
hwif->speedproc = &amd_set_drive;
hwif->set_dma_mode = &amd_set_drive;
for (i = 0; i < 2; i++) {
hwif->drives[i].io_32bit = 1;
@ -441,7 +431,8 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
.bootable = ON_BOARD, \
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
| IDE_HFLAG_PIO_NO_DOWNGRADE, \
| IDE_HFLAG_PIO_NO_DOWNGRADE \
| IDE_HFLAG_POST_SET_MODE, \
.pio_mask = ATA_PIO5, \
}
@ -454,7 +445,8 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
.enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
.bootable = ON_BOARD, \
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST \
| IDE_HFLAG_PIO_NO_DOWNGRADE, \
| IDE_HFLAG_PIO_NO_DOWNGRADE \
| IDE_HFLAG_POST_SET_MODE, \
.pio_mask = ATA_PIO5, \
}

33
drivers/ide/pci/atiixp.c
View File

@ -122,14 +122,14 @@ static void atiixp_dma_host_off(ide_drive_t *drive)
}
/**
* atiixp_tune_pio - tune a drive attached to a ATIIXP
* @drive: drive to tune
* @pio: desired PIO mode
* atiixp_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Set the interface PIO mode.
*/
static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
@ -153,23 +153,16 @@ static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&atiixp_lock, flags);
}
static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* atiixp_tune_chipset - tune a ATIIXP interface
* @drive: IDE drive to tune
* @speed: speed to configure
* atiixp_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Set a ATIIXP interface channel to the desired speeds. This involves
* requires the right timing data into the ATIIXP configuration space
* then setting the drive parameters appropriately
* Set a ATIIXP host controller to the desired DMA mode. This involves
* programming the right timing data into the PCI configuration space.
*/
static int atiixp_speedproc(ide_drive_t *drive, const u8 speed)
static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
@ -204,9 +197,7 @@ static int atiixp_speedproc(ide_drive_t *drive, const u8 speed)
else
pio = speed - XFER_PIO_0;
atiixp_tune_pio(drive, pio);
return ide_config_drive_speed(drive, speed);
atiixp_set_pio_mode(drive, pio);
}
/**
@ -249,7 +240,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->speedproc = &atiixp_speedproc;
hwif->set_dma_mode = &atiixp_set_dma_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

9
drivers/ide/pci/cmd64x.c
View File

@ -280,10 +280,9 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
return;
cmd64x_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed)
static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -324,13 +323,11 @@ static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed)
program_cycle_times(drive, 480, 215);
break;
default:
return 1;
return;
}
if (speed >= XFER_SW_DMA_0)
(void) pci_write_config_byte(dev, pciU, regU);
return ide_config_drive_speed(drive, speed);
}
static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
@ -524,7 +521,7 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->speedproc = &cmd64x_tune_chipset;
hwif->set_dma_mode = &cmd64x_set_dma_mode;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;

32
drivers/ide/pci/cs5520.c
View File

@ -96,22 +96,13 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
reg = inb(hwif->dma_base + 0x02 + 8*controller);
reg |= 1<<((drive->dn&1)+5);
outb(reg, hwif->dma_base + 0x02 + 8*controller);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed)
static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
printk(KERN_ERR "cs55x0: bad ide timing.\n");
cs5520_set_pio_mode(drive, 0);
/*
* FIXME: this is incorrect to return zero here but
* since all users of ide_set_xfer_rate() ignore
* the return value it is not a problem currently
*/
return 0;
}
static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
@ -150,26 +141,25 @@ static int cs5520_dma_on(ide_drive_t *drive)
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &cs5520_set_pio_mode;
hwif->speedproc = &cs5520_tune_chipset;
hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
hwif->ide_dma_on = &cs5520_dma_on;
hwif->set_dma_mode = &cs5520_set_dma_mode;
if(!noautodma)
hwif->autodma = 1;
if(!hwif->dma_base)
{
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
if (hwif->dma_base == 0) {
hwif->drives[1].autotune = hwif->drives[0].autotune = 1;
return;
}
hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
hwif->ide_dma_on = &cs5520_dma_on;
/* ATAPI is harder so leave it for now */
hwif->atapi_dma = 0;
hwif->ultra_mask = 0;
hwif->swdma_mask = 0;
hwif->mwdma_mask = 0;
if (!noautodma)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}

50
drivers/ide/pci/cs5530.c
View File

@ -30,22 +30,6 @@
#include <asm/io.h>
#include <asm/irq.h>
/**
* cs5530_xfer_set_mode - set a new transfer mode at the drive
* @drive: drive to tune
* @mode: new mode
*
* Logging wrapper to the IDE driver speed configuration. This can
* probably go away now.
*/
static int cs5530_set_xfer_mode (ide_drive_t *drive, u8 mode)
{
printk(KERN_DEBUG "%s: cs5530_set_xfer_mode(%s)\n",
drive->name, ide_xfer_verbose(mode));
return (ide_config_drive_speed(drive, mode));
}
/*
* Here are the standard PIO mode 0-4 timings for each "format".
* Format-0 uses fast data reg timings, with slower command reg timings.
@ -62,20 +46,12 @@ static unsigned int cs5530_pio_timings[2][5] = {
#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
{
unsigned long basereg = CS5530_BASEREG(drive->hwif);
unsigned int format = (inl(basereg + 4) >> 31) & 1;
outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
}
/**
* cs5530_set_pio_mode - set PIO mode
* cs5530_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Handles setting of PIO mode for both the chipset and drive.
* Handles setting of PIO mode for the chipset.
*
* The init_hwif_cs5530() routine guarantees that all drives
* will have valid default PIO timings set up before we get here.
@ -83,8 +59,10 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
unsigned long basereg = CS5530_BASEREG(drive->hwif);
unsigned int format = (inl(basereg + 4) >> 31) & 1;
outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
}
/**
@ -142,20 +120,11 @@ static int cs5530_config_dma(ide_drive_t *drive)
return 1;
}
static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode)
static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
unsigned long basereg;
unsigned int reg, timings = 0;
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
if (cs5530_set_xfer_mode(drive, mode))
return 1; /* failure */
/*
* Now tune the chipset to match the drive:
*/
switch (mode) {
case XFER_UDMA_0: timings = 0x00921250; break;
case XFER_UDMA_1: timings = 0x00911140; break;
@ -180,8 +149,6 @@ static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode)
outl(reg, basereg + 4); /* write drive0 config register */
outl(timings, basereg + 12); /* write drive1 config register */
}
return 0; /* success */
}
/**
@ -299,7 +266,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->set_pio_mode = &cs5530_set_pio_mode;
hwif->speedproc = &cs5530_tune_chipset;
hwif->set_dma_mode = &cs5530_set_dma_mode;
basereg = CS5530_BASEREG(hwif);
d0_timings = inl(basereg + 0);
@ -340,6 +307,7 @@ static ide_pci_device_t cs5530_chipset __devinitdata = {
.autodma = AUTODMA,
.bootable = ON_BOARD,
.pio_mask = ATA_PIO4,
.host_flags = IDE_HFLAG_POST_SET_MODE,
};
static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)

40
drivers/ide/pci/cs5535.c
View File

@ -131,24 +131,21 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
}
}
/****
* cs5535_set_drive - Configure the drive to the new speed
* @drive: Drive to set up
* @speed: desired speed
/**
* cs5535_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* cs5535_set_drive() configures the drive and the chipset to a
* new speed. It also can be called by upper layers.
* Programs the chipset for DMA mode.
*/
static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
{
ide_config_drive_speed(drive, speed);
cs5535_set_speed(drive, speed);
return 0;
static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
cs5535_set_speed(drive, speed);
}
/**
* cs5535_set_pio_mode - PIO setup
* cs5535_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
@ -157,7 +154,6 @@ static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
cs5535_set_speed(drive, XFER_PIO_0 + pio);
}
@ -194,12 +190,16 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
*/
static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
{
int i;
hwif->autodma = 0;
hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->speedproc = &cs5535_set_drive;
hwif->set_dma_mode = &cs5535_set_dma_mode;
hwif->drives[1].autotune = hwif->drives[0].autotune = 1;
if (hwif->dma_base == 0)
return;
hwif->ide_dma_check = &cs5535_dma_check;
hwif->atapi_dma = 1;
@ -211,11 +211,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
if (!noautodma)
hwif->autodma = 1;
/* just setting autotune and not worrying about bios timings */
for (i = 0; i < 2; i++) {
hwif->drives[i].autotune = 1;
hwif->drives[i].autodma = hwif->autodma;
}
hwif->drives[1].autodma = hwif->drives[0].autodma = hwif->autodma;
}
static ide_pci_device_t cs5535_chipset __devinitdata = {
@ -223,7 +219,7 @@ static ide_pci_device_t cs5535_chipset __devinitdata = {
.init_hwif = init_hwif_cs5535,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_SINGLE,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
.pio_mask = ATA_PIO4,
};

9
drivers/ide/pci/hpt34x.c
View File

@ -43,7 +43,7 @@
#define HPT343_DEBUG_DRIVE_INFO 0
static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed)
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
@ -73,13 +73,11 @@ static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed)
drive->dn, reg1, tmp1, reg2, tmp2,
hi_speed, lo_speed);
#endif /* HPT343_DEBUG_DRIVE_INFO */
return(ide_config_drive_speed(drive, speed));
}
static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
hpt34x_set_mode(drive, XFER_PIO_0 + pio);
}
static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
@ -145,7 +143,8 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &hpt34x_set_pio_mode;
hwif->speedproc = &hpt34x_tune_chipset;
hwif->set_dma_mode = &hpt34x_set_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

18
drivers/ide/pci/hpt366.c
View File

@ -600,7 +600,7 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
return (*info->settings)[i];
}
static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed)
static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -623,11 +623,9 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed)
new_itr &= ~0xc0000000;
pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed)
static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -647,24 +645,22 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed)
if (speed < XFER_MW_DMA_0)
new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
if (info->chip_type >= HPT370)
return hpt37x_tune_chipset(drive, speed);
hpt37x_set_mode(drive, speed);
else /* hpt368: hpt_minimum_revision(dev, 2) */
return hpt36x_tune_chipset(drive, speed);
hpt36x_set_mode(drive, speed);
}
static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
}
static int hpt3xx_quirkproc(ide_drive_t *drive)
@ -1257,7 +1253,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->select_data = hwif->channel ? 0x54 : 0x50;
hwif->set_pio_mode = &hpt3xx_set_pio_mode;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->set_dma_mode = &hpt3xx_set_mode;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;

34
drivers/ide/pci/it8213.c
View File

@ -48,15 +48,15 @@ static u8 it8213_dma_2_pio (u8 xfer_rate) {
}
}
/*
* it8213_tune_pio - tune a drive
* @drive: drive to tune
* @pio: desired PIO mode
/**
* it8213_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Set the interface PIO mode.
*/
static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -105,21 +105,15 @@ static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&tune_lock, flags);
}
static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
it8213_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* it8213_tune_chipset - set controller timings
* @drive: Drive to set up
* @speed: speed we want to achieve
* it8213_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Tune the ITE chipset for the desired mode.
* Tune the ITE chipset for the DMA mode.
*/
static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed)
static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -152,7 +146,7 @@ static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_SW_DMA_2:
break;
default:
return -1;
return;
}
if (speed >= XFER_UDMA_0) {
@ -182,9 +176,7 @@ static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
}
it8213_tune_pio(drive, it8213_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
it8213_set_pio_mode(drive, it8213_dma_2_pio(speed));
}
/**
@ -220,7 +212,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
{
u8 reg42h = 0;
hwif->speedproc = &it8213_tune_chipset;
hwif->set_dma_mode = &it8213_set_dma_mode;
hwif->set_pio_mode = &it8213_set_pio_mode;
hwif->autodma = 0;

90
drivers/ide/pci/it821x.c
View File

@ -229,24 +229,24 @@ static void it821x_clock_strategy(ide_drive_t *drive)
}
/**
* it821x_tunepio - tune a drive
* @drive: drive to tune
* @pio: the desired PIO mode
* it821x_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Try to tune the drive/host to the desired PIO mode taking into
* the consideration the maximum PIO mode supported by the other
* device on the cable.
* Tune the host to the desired PIO mode taking into the consideration
* the maximum PIO mode supported by the other device on the cable.
*/
static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int unit = drive->select.b.unit;
ide_drive_t *pair = &hwif->drives[1 - unit];
u8 set_pio = pio;
/* Spec says 89 ref driver uses 88 */
static u16 pio[] = { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };
/*
@ -261,22 +261,12 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
set_pio = pair_pio;
}
if (itdev->smart)
return 0;
/* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */
itdev->want[unit][1] = pio_want[set_pio];
itdev->want[unit][0] = 1; /* PIO is lowest priority */
itdev->pio[unit] = pio[set_pio];
itdev->pio[unit] = pio_timings[set_pio];
it821x_clock_strategy(drive);
it821x_program(drive, itdev->pio[unit]);
return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio);
}
static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void)it821x_tunepio(drive, pio);
}
/**
@ -405,47 +395,24 @@ static int it821x_dma_end(ide_drive_t *drive)
}
/**
* it821x_tune_chipset - set controller timings
* @drive: Drive to set up
* @speed: speed we want to achieve
* it821x_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Tune the ITE chipset for the desired mode.
* Tune the ITE chipset for the desired DMA mode.
*/
static int it821x_tune_chipset(ide_drive_t *drive, const u8 speed)
static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
if (itdev->smart == 0) {
switch (speed) {
/* MWDMA tuning is really hard because our MWDMA and PIO
timings are kept in the same place. We can switch in the
host dma on/off callbacks */
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
it821x_tune_mwdma(drive, (speed - XFER_MW_DMA_0));
break;
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
it821x_tune_udma(drive, (speed - XFER_UDMA_0));
break;
default:
return 1;
}
return ide_config_drive_speed(drive, speed);
}
/* don't touch anything in the smart mode */
return 0;
/*
* MWDMA tuning is really hard because our MWDMA and PIO
* timings are kept in the same place. We can switch in the
* host dma on/off callbacks.
*/
if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_6)
it821x_tune_udma(drive, speed - XFER_UDMA_0);
else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
it821x_tune_mwdma(drive, speed - XFER_MW_DMA_0);
}
/**
@ -629,14 +596,15 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
printk(KERN_WARNING "it821x: Revision 0x10, workarounds activated.\n");
}
hwif->speedproc = &it821x_tune_chipset;
hwif->set_pio_mode = &it821x_set_pio_mode;
if (idev->smart == 0) {
hwif->set_pio_mode = &it821x_set_pio_mode;
hwif->set_dma_mode = &it821x_set_dma_mode;
/* MWDMA/PIO clock switching for pass through mode */
if(!idev->smart) {
/* MWDMA/PIO clock switching for pass through mode */
hwif->dma_start = &it821x_dma_start;
hwif->ide_dma_end = &it821x_dma_end;
}
} else
hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

15
drivers/ide/pci/jmicron.c
View File

@ -85,21 +85,18 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* jmicron_tune_chipset - set controller timings
* @drive: Drive to set up
* @speed: speed we want to achieve
* jmicron_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @mode: DMA mode
*
* As the JMicron snoops for timings all we actually need to do is
* set the transfer mode on the device.
* As the JMicron snoops for timings we don't need to do anything here.
*/
static int jmicron_tune_chipset(ide_drive_t *drive, const u8 speed)
static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
return ide_config_drive_speed(drive, speed);
}
/**
@ -129,8 +126,8 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive)
static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
{
hwif->speedproc = &jmicron_tune_chipset;
hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->set_dma_mode = &jmicron_set_dma_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

24
drivers/ide/pci/pdc202xx_new.c
View File

@ -146,19 +146,16 @@ static struct udma_timing {
{ 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
};
static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed)
static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
int err;
/*
* Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
* IDE core issues SETFEATURES_XFER to the drive first (thanks to
* IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will
* automatically set the timing registers based on 100 MHz PLL output.
*/
err = ide_config_drive_speed(drive, speed);
/*
*
* As we set up the PLL to output 133 MHz for UltraDMA/133 capable
* chips, we must override the default register settings...
*/
@ -211,13 +208,11 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed)
set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
}
return err;
}
static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
pdcnew_set_mode(drive, XFER_PIO_0 + pio);
}
static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
@ -490,9 +485,9 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &pdcnew_set_pio_mode;
hwif->set_dma_mode = &pdcnew_set_mode;
hwif->quirkproc = &pdcnew_quirkproc;
hwif->speedproc = &pdcnew_tune_chipset;
hwif->resetproc = &pdcnew_reset;
hwif->err_stops_fifo = 1;
@ -583,6 +578,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
.host_flags = IDE_HFLAG_POST_SET_MODE,
},{ /* 1 */
.name = "PDC20269",
.init_setup = init_setup_pdcnew,
@ -592,6 +588,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
.host_flags = IDE_HFLAG_POST_SET_MODE,
},{ /* 2 */
.name = "PDC20270",
.init_setup = init_setup_pdc20270,
@ -601,6 +598,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x3f, /* udma0-5 */
.host_flags = IDE_HFLAG_POST_SET_MODE,
},{ /* 3 */
.name = "PDC20271",
.init_setup = init_setup_pdcnew,
@ -610,6 +608,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
.host_flags = IDE_HFLAG_POST_SET_MODE,
},{ /* 4 */
.name = "PDC20275",
.init_setup = init_setup_pdcnew,
@ -619,6 +618,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
.host_flags = IDE_HFLAG_POST_SET_MODE,
},{ /* 5 */
.name = "PDC20276",
.init_setup = init_setup_pdc20276,
@ -628,6 +628,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
.host_flags = IDE_HFLAG_POST_SET_MODE,
},{ /* 6 */
.name = "PDC20277",
.init_setup = init_setup_pdcnew,
@ -637,6 +638,7 @@ static ide_pci_device_t pdcnew_chipsets[] __devinitdata = {
.bootable = OFF_BOARD,
.pio_mask = ATA_PIO4,
.udma_mask = 0x7f, /* udma0-6*/
.host_flags = IDE_HFLAG_POST_SET_MODE,
}
};

9
drivers/ide/pci/pdc202xx_old.c
View File

@ -63,7 +63,7 @@ static const char *pdc_quirk_drives[] = {
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed)
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -138,13 +138,11 @@ static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_read_config_dword(dev, drive_pci, &drive_conf);
printk("0x%08x\n", drive_conf);
#endif
return ide_config_drive_speed(drive, speed);
}
static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
}
static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
@ -330,14 +328,13 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &pdc202xx_set_pio_mode;
hwif->set_dma_mode = &pdc202xx_set_mode;
hwif->quirkproc = &pdc202xx_quirkproc;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
hwif->resetproc = &pdc202xx_reset;
hwif->speedproc = &pdc202xx_tune_chipset;
hwif->err_stops_fifo = 1;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;

46
drivers/ide/pci/piix.c
View File

@ -137,13 +137,14 @@ static u8 piix_dma_2_pio (u8 xfer_rate) {
}
/**
* piix_tune_pio - tune PIIX for PIO mode
* @drive: drive to tune
* @pio: desired PIO mode
* piix_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Set the interface PIO mode based upon the settings done by AMI BIOS.
*/
static void piix_tune_pio (ide_drive_t *drive, u8 pio)
static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -204,31 +205,15 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio)
}
/**
* piix_set_pio_mode - set PIO mode
* @drive: drive to tune
* @pio: desired PIO mode
* piix_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Set the drive's PIO mode (might be useful if drive is not registered
* in CMOS for any reason).
* Set a PIIX host controller to the desired DMA mode. This involves
* programming the right timing data into the PCI configuration space.
*/
static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* piix_tune_chipset - tune a PIIX interface
* @drive: IDE drive to tune
* @speed: speed to configure
*
* Set a PIIX interface channel to the desired speeds. This involves
* requires the right timing data into the PIIX configuration space
* then setting the drive parameters appropriately
*/
static int piix_tune_chipset(ide_drive_t *drive, const u8 speed)
static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -259,7 +244,7 @@ static int piix_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2: break;
default: return -1;
default: return;
}
if (speed >= XFER_UDMA_0) {
@ -288,9 +273,7 @@ static int piix_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
}
piix_tune_pio(drive, piix_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
piix_set_pio_mode(drive, piix_dma_2_pio(speed));
}
/**
@ -448,7 +431,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &piix_set_pio_mode;
hwif->speedproc = &piix_tune_chipset;
hwif->set_dma_mode = &piix_set_dma_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;

52
drivers/ide/pci/sc1200.c
View File

@ -68,17 +68,6 @@ static unsigned short sc1200_get_pci_clock (void)
return pci_clock;
}
extern char *ide_xfer_verbose (byte xfer_rate);
/*
* Set a new transfer mode at the drive
*/
static int sc1200_set_xfer_mode (ide_drive_t *drive, byte mode)
{
printk("%s: sc1200_set_xfer_mode(%s)\n", drive->name, ide_xfer_verbose(mode));
return ide_config_drive_speed(drive, mode);
}
/*
* Here are the standard PIO mode 0-4 timings for each "format".
* Format-0 uses fast data reg timings, with slower command reg timings.
@ -138,7 +127,7 @@ out:
return mask;
}
static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode)
static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
@ -146,17 +135,9 @@ static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode)
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
if (sc1200_set_xfer_mode(drive, mode))
return 1; /* failure */
pci_clock = sc1200_get_pci_clock();
/*
* Now tune the chipset to match the drive:
*
* Note that each DMA mode has several timings associated with it.
* The correct timing depends on the fast PCI clock freq.
*/
@ -216,8 +197,6 @@ static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode)
} else {
pci_write_config_dword(hwif->pci_dev, basereg+12, timings);
}
return 0; /* success */
}
/*
@ -286,13 +265,12 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
hwif->dma_off_quietly(drive);
if (sc1200_tune_chipset(drive, mode) == 0)
if (ide_set_dma_mode(drive, mode) == 0)
hwif->dma_host_on(drive);
return;
}
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
sc1200_tunepio(drive, pio);
sc1200_tunepio(drive, pio);
}
#ifdef CONFIG_PM
@ -400,16 +378,20 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
if (hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
hwif->autodma = 0;
if (hwif->dma_base) {
hwif->udma_filter = sc1200_udma_filter;
hwif->ide_dma_check = &sc1200_config_dma;
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
hwif->set_pio_mode = &sc1200_set_pio_mode;
hwif->speedproc = &sc1200_tune_chipset;
}
hwif->set_pio_mode = &sc1200_set_pio_mode;
hwif->set_dma_mode = &sc1200_set_dma_mode;
if (hwif->dma_base == 0)
return;
hwif->udma_filter = sc1200_udma_filter;
hwif->ide_dma_check = &sc1200_config_dma;
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x07;
hwif->mwdma_mask = 0x07;
@ -423,7 +405,7 @@ static ide_pci_device_t sc1200_chipset __devinitdata = {
.init_hwif = init_hwif_sc1200,
.autodma = AUTODMA,
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_ABUSE_DMA_MODES,
.host_flags = IDE_HFLAG_ABUSE_DMA_MODES | IDE_HFLAG_POST_SET_MODE,
.pio_mask = ATA_PIO4,
};

28
drivers/ide/pci/scc_pata.c
View File

@ -190,15 +190,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
}
/**
* scc_tune_pio - tune a drive PIO mode
* @drive: drive to tune
* @mode_wanted: the target operating mode
* scc_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Load the timing settings for this device mode into the
* controller.
*/
static void scc_tune_pio(ide_drive_t *drive, const u8 pio)
static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct scc_ports *ports = ide_get_hwifdata(hwif);
@ -221,22 +221,16 @@ static void scc_tune_pio(ide_drive_t *drive, const u8 pio)
out_be32((void __iomem *)pioct_port, reg);
}
static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
scc_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* scc_tune_chipset - tune a drive DMA mode
* @drive: Drive to set up
* @speed: speed we want to achieve
* scc_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Load the timing settings for this device mode into the
* controller.
*/
static int scc_tune_chipset(ide_drive_t *drive, const u8 speed)
static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct scc_ports *ports = ide_get_hwifdata(hwif);
@ -271,7 +265,7 @@ static int scc_tune_chipset(ide_drive_t *drive, const u8 speed)
idx = speed - XFER_UDMA_0;
break;
default:
return 1;
return;
}
jcactsel = JCACTSELtbl[offset][idx];
@ -287,8 +281,6 @@ static int scc_tune_chipset(ide_drive_t *drive, const u8 speed)
}
reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
out_be32((void __iomem *)udenvt_port, reg);
return ide_config_drive_speed(drive, speed);
}
/**
@ -708,8 +700,8 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
hwif->dma_setup = scc_dma_setup;
hwif->ide_dma_end = scc_ide_dma_end;
hwif->speedproc = scc_tune_chipset;
hwif->set_pio_mode = scc_set_pio_mode;
hwif->set_dma_mode = scc_set_dma_mode;
hwif->ide_dma_check = scc_config_drive_for_dma;
hwif->ide_dma_test_irq = scc_dma_test_irq;
hwif->udma_filter = scc_udma_filter;

14
drivers/ide/pci/serverworks.c
View File

@ -124,7 +124,7 @@ static u8 svwks_csb_check (struct pci_dev *dev)
return 0;
}
static void svwks_tune_pio(ide_drive_t *drive, const u8 pio)
static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
@ -145,7 +145,7 @@ static void svwks_tune_pio(ide_drive_t *drive, const u8 pio)
}
}
static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed)
static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
@ -193,14 +193,6 @@ static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
pci_write_config_byte(dev, 0x54, ultra_enable);
return (ide_config_drive_speed(drive, speed));
}
static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
@ -384,7 +376,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
hwif->irq = hwif->channel ? 15 : 14;
hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->speedproc = &svwks_tune_chipset;
hwif->set_dma_mode = &svwks_set_dma_mode;
hwif->udma_filter = &svwks_udma_filter;
hwif->atapi_dma = 1;

24
drivers/ide/pci/sgiioc4.c
View File

@ -291,12 +291,8 @@ static void sgiioc4_dma_off_quietly(ide_drive_t *drive)
drive->hwif->dma_host_off(drive);
}
static int sgiioc4_speedproc(ide_drive_t *drive, const u8 speed)
static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
if (speed != XFER_MW_DMA_2)
return 1;
return ide_config_drive_speed(drive, speed);
}
static int sgiioc4_ide_dma_check(ide_drive_t *drive)
@ -591,11 +587,9 @@ static void __devinit
ide_init_sgiioc4(ide_hwif_t * hwif)
{
hwif->mmio = 1;
hwif->atapi_dma = 1;
hwif->mwdma_mask = 0x04;
hwif->pio_mask = 0x00;
hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
hwif->speedproc = &sgiioc4_speedproc;
hwif->set_dma_mode = &sgiioc4_set_dma_mode;
hwif->selectproc = NULL;/* Use the default routine to select drive */
hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
@ -606,6 +600,14 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->quirkproc = NULL;
hwif->busproc = NULL;
hwif->INB = &sgiioc4_INB;
if (hwif->dma_base == 0)
return;
hwif->atapi_dma = 1;
hwif->mwdma_mask = 0x04;
hwif->dma_setup = &sgiioc4_ide_dma_setup;
hwif->dma_start = &sgiioc4_ide_dma_start;
hwif->ide_dma_end = &sgiioc4_ide_dma_end;
@ -617,8 +619,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
hwif->dma_host_off = &sgiioc4_dma_host_off;
hwif->dma_lost_irq = &sgiioc4_dma_lost_irq;
hwif->dma_timeout = &ide_dma_timeout;
hwif->INB = &sgiioc4_INB;
}
static int __devinit
@ -688,8 +688,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
/* Initializing chipset IRQ Registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
ide_init_sgiioc4(hwif);
hwif->autodma = 0;
if (dma_base && ide_dma_sgiioc4(hwif, dma_base) == 0) {
@ -699,6 +697,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
hwif->name, DRV_NAME);
ide_init_sgiioc4(hwif);
if (probe_hwif_init(hwif))
return -EIO;

29
drivers/ide/pci/siimage.c
View File

@ -165,16 +165,16 @@ out:
}
/**
* sil_tune_pio - tune a drive
* @drive: drive to tune
* @pio: the desired PIO mode
* sil_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
* Load the timing settings for this device mode into the
* controller. If we are in PIO mode 3 or 4 turn on IORDY
* monitoring (bit 9). The TF timing is bits 31:16
*/
static void sil_tune_pio(ide_drive_t *drive, u8 pio)
static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
{
const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
@ -234,21 +234,15 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
}
}
static void sil_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* siimage_tune_chipset - set controller timings
* @drive: Drive to set up
* @speed: speed we want to achieve
* sil_set_dma_mode - set host controller for DMA mode
* @drive: drive
* @speed: DMA mode
*
* Tune the SII chipset for the desired mode.
* Tune the SiI chipset for the desired DMA mode.
*/
static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed)
static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
@ -303,7 +297,7 @@ static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed)
mode |= ((unit) ? 0x30 : 0x03);
break;
default:
return 1;
return;
}
if (hwif->mmio) {
@ -315,7 +309,6 @@ static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_word(hwif->pci_dev, ma, multi);
pci_write_config_word(hwif->pci_dev, ua, ultra);
}
return (ide_config_drive_speed(drive, speed));
}
/**
@ -904,8 +897,8 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
hwif->set_pio_mode = &sil_set_pio_mode;
hwif->set_dma_mode = &sil_set_dma_mode;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;

16
drivers/ide/pci/sis5513.c
View File

@ -451,7 +451,7 @@ static void config_drive_art_rwp (ide_drive_t *drive)
}
/* Set per-drive active and recovery time */
static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -519,20 +519,14 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
}
}
static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
config_art_rwp_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed)
static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u32 regdw;
u8 drive_pci, reg;
/* See config_art_rwp_pio for drive pci config registers */
/* See sis_set_pio_mode() for drive PCI config registers */
drive_pci = 0x40;
if (chipset_family >= ATA_133) {
u32 reg54h;
@ -600,8 +594,6 @@ static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed)
BUG();
break;
}
return ide_config_drive_speed(drive, speed);
}
static int sis5513_config_xfer_rate(ide_drive_t *drive)
@ -841,7 +833,7 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
hwif->irq = hwif->channel ? 15 : 14;
hwif->set_pio_mode = &sis_set_pio_mode;
hwif->speedproc = &sis5513_tune_chipset;
hwif->set_dma_mode = &sis_set_dma_mode;
if (chipset_family >= ATA_133)
hwif->udma_filter = sis5513_ata133_udma_filter;

23
drivers/ide/pci/sl82c105.c
View File

@ -75,7 +75,7 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
/*
* Configure the chipset for PIO mode.
*/
static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
@ -105,9 +105,9 @@ static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
}
/*
* Configure the drive and chipset for a new transfer speed.
* Configure the chipset for DMA mode.
*/
static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
u16 drv_ctrl;
@ -140,10 +140,8 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
}
break;
default:
return -1;
return;
}
return ide_config_drive_speed(drive, speed);
}
/*
@ -306,17 +304,6 @@ static void sl82c105_resetproc(ide_drive_t *drive)
pci_read_config_dword(dev, 0x40, &val);
pci_set_drvdata(dev, (void *)val);
}
/*
* We only deal with PIO mode here - DMA mode 'using_dma' is not
* initialised at the point that this function is called.
*/
static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
sl82c105_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/*
* Return the revision of the Winbond bridge
@ -383,7 +370,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->set_pio_mode = &sl82c105_set_pio_mode;
hwif->speedproc = &sl82c105_tune_chipset;
hwif->set_dma_mode = &sl82c105_set_dma_mode;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;

18
drivers/ide/pci/slc90e66.c
View File

@ -42,7 +42,7 @@ static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
}
}
static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -95,13 +95,7 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&ide_lock, flags);
}
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -125,7 +119,7 @@ static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2: break;
default: return -1;
default: return;
}
if (speed >= XFER_UDMA_0) {
@ -144,9 +138,7 @@ static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
}
slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
slc90e66_set_pio_mode(drive, slc90e66_dma_2_pio(speed));
}
static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
@ -172,8 +164,8 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->speedproc = &slc90e66_tune_chipset;
hwif->set_pio_mode = &slc90e66_set_pio_mode;
hwif->set_dma_mode = &slc90e66_set_dma_mode;
pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);

9
drivers/ide/pci/tc86c001.c
View File

@ -13,7 +13,7 @@
#include <linux/pci.h>
#include <linux/ide.h>
static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed)
static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
@ -39,13 +39,11 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed)
scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
scr |= mode;
outw(scr, scr_port);
return ide_config_drive_speed(drive, speed);
}
static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
tc86c001_set_mode(drive, XFER_PIO_0 + pio);
}
/*
@ -193,7 +191,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
hwif->config_data = sc_base;
hwif->set_pio_mode = &tc86c001_set_pio_mode;
hwif->speedproc = &tc86c001_tune_chipset;
hwif->set_dma_mode = &tc86c001_set_mode;
hwif->busproc = &tc86c001_busproc;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;

10
drivers/ide/pci/triflex.c
View File

@ -40,7 +40,7 @@
#include <linux/ide.h>
#include <linux/init.h>
static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed)
static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@ -82,20 +82,18 @@ static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed)
timing = 0x0808;
break;
default:
return -1;
return;
}
triflex_timings &= ~(0xFFFF << (16 * unit));
triflex_timings |= (timing << (16 * unit));
pci_write_config_dword(dev, channel_offset, triflex_timings);
return (ide_config_drive_speed(drive, speed));
}
static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void)triflex_tune_chipset(drive, XFER_PIO_0 + pio);
triflex_set_mode(drive, XFER_PIO_0 + pio);
}
static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
@ -111,7 +109,7 @@ static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
{
hwif->set_pio_mode = &triflex_set_pio_mode;
hwif->speedproc = &triflex_tune_chipset;
hwif->set_dma_mode = &triflex_set_mode;
if (hwif->dma_base == 0)
return;

29
drivers/ide/pci/via82cxxx.c
View File

@ -1,6 +1,6 @@
/*
*
* Version 3.48
* Version 3.49
*
* VIA IDE driver for Linux. Supported southbridges:
*
@ -153,21 +153,17 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
* @drive: Drive to set up
* @speed: desired speed
*
* via_set_drive() computes timing values configures the drive and
* the chipset to a desired transfer mode. It also can be called
* by upper layers.
* via_set_drive() computes timing values configures the chipset to
* a desired transfer mode. It also can be called by upper layers.
*/
static int via_set_drive(ide_drive_t *drive, const u8 speed)
static void via_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
struct ide_timing t, p;
unsigned int T, UT;
if (speed != XFER_PIO_SLOW)
ide_config_drive_speed(drive, speed);
T = 1000000000 / via_clock;
switch (vdev->via_config->udma_mask) {
@ -186,16 +182,10 @@ static int via_set_drive(ide_drive_t *drive, const u8 speed)
}
via_set_speed(HWIF(drive), drive->dn, &t);
if (!drive->init_speed)
drive->init_speed = speed;
drive->current_speed = speed;
return 0;
}
/**
* via_set_pio_mode - PIO setup
* via_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
*
@ -456,8 +446,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->set_pio_mode = &via_set_pio_mode;
hwif->speedproc = &via_set_drive;
hwif->set_dma_mode = &via_set_drive;
#ifdef CONFIG_PPC_CHRP
if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
@ -500,7 +489,8 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
.enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
| IDE_HFLAG_PIO_NO_DOWNGRADE,
| IDE_HFLAG_PIO_NO_DOWNGRADE
| IDE_HFLAG_POST_SET_MODE,
.pio_mask = ATA_PIO5,
},{ /* 1 */
.name = "VP_IDE",
@ -510,7 +500,8 @@ static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST
| IDE_HFLAG_PIO_NO_DOWNGRADE,
| IDE_HFLAG_PIO_NO_DOWNGRADE
| IDE_HFLAG_POST_SET_MODE,
.pio_mask = ATA_PIO5,
}
};

321
drivers/ide/ppc/pmac.c
View File

@ -392,6 +392,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
for (i=0; table[i].cycle_time; i++)
if (cycle_time > table[i+1].cycle_time)
return table[i].timing_reg;
BUG();
return 0;
}
@ -528,98 +529,13 @@ pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port)
tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
}
/*
* Send the SET_FEATURE IDE command to the drive and update drive->id with
* the new state. We currently don't use the generic routine as it used to
* cause various trouble, especially with older mediabays.
* This code is sometimes triggering a spurrious interrupt though, I need
* to sort that out sooner or later and see if I can finally get the
* common version to work properly in all cases
*/
static int
pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
{
ide_hwif_t *hwif = HWIF(drive);
int result = 1;
disable_irq_nosync(hwif->irq);
udelay(1);
SELECT_DRIVE(drive);
SELECT_MASK(drive, 0);
udelay(1);
/* Get rid of pending error state */
(void) hwif->INB(IDE_STATUS_REG);
/* Timeout bumped for some powerbooks */
if (wait_for_ready(drive, 2000)) {
/* Timeout bumped for some powerbooks */
printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
"before SET_FEATURE!\n", drive->name);
goto out;
}
udelay(10);
hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
hwif->OUTB(command, IDE_NSECTOR_REG);
hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
udelay(1);
/* Timeout bumped for some powerbooks */
result = wait_for_ready(drive, 2000);
hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
if (result)
printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
"after SET_FEATURE !\n", drive->name);
out:
SELECT_MASK(drive, 0);
if (result == 0) {
drive->id->dma_ultra &= ~0xFF00;
drive->id->dma_mword &= ~0x0F00;
drive->id->dma_1word &= ~0x0F00;
switch(command) {
case XFER_UDMA_7:
drive->id->dma_ultra |= 0x8080; break;
case XFER_UDMA_6:
drive->id->dma_ultra |= 0x4040; break;
case XFER_UDMA_5:
drive->id->dma_ultra |= 0x2020; break;
case XFER_UDMA_4:
drive->id->dma_ultra |= 0x1010; break;
case XFER_UDMA_3:
drive->id->dma_ultra |= 0x0808; break;
case XFER_UDMA_2:
drive->id->dma_ultra |= 0x0404; break;
case XFER_UDMA_1:
drive->id->dma_ultra |= 0x0202; break;
case XFER_UDMA_0:
drive->id->dma_ultra |= 0x0101; break;
case XFER_MW_DMA_2:
drive->id->dma_mword |= 0x0404; break;
case XFER_MW_DMA_1:
drive->id->dma_mword |= 0x0202; break;
case XFER_MW_DMA_0:
drive->id->dma_mword |= 0x0101; break;
case XFER_SW_DMA_2:
drive->id->dma_1word |= 0x0404; break;
case XFER_SW_DMA_1:
drive->id->dma_1word |= 0x0202; break;
case XFER_SW_DMA_0:
drive->id->dma_1word |= 0x0101; break;
default: break;
}
if (!drive->init_speed)
drive->init_speed = command;
drive->current_speed = command;
}
enable_irq(hwif->irq);
return result;
}
/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
u32 *timings;
u32 *timings, t;
unsigned accessTicks, recTicks;
unsigned accessTime, recTime;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
@ -630,6 +546,7 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
t = *timings;
cycle_time = ide_pio_cycle_time(drive, pio);
@ -637,18 +554,14 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
case controller_sh_ata6: {
/* 133Mhz cell */
u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
t = (t & ~TR_133_PIOREG_PIO_MASK) | tr;
break;
}
case controller_un_ata6:
case controller_k2_ata6: {
/* 100Mhz cell */
u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
if (tr == 0)
return;
*timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
t = (t & ~TR_100_PIOREG_PIO_MASK) | tr;
break;
}
case controller_kl_ata4:
@ -662,9 +575,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
accessTicks = min(accessTicks, 0x1fU);
recTicks = SYSCLK_TICKS_66(recTime);
recTicks = min(recTicks, 0x1fU);
*timings = ((*timings) & ~TR_66_PIO_MASK) |
(accessTicks << TR_66_PIO_ACCESS_SHIFT) |
(recTicks << TR_66_PIO_RECOVERY_SHIFT);
t = (t & ~TR_66_PIO_MASK) |
(accessTicks << TR_66_PIO_ACCESS_SHIFT) |
(recTicks << TR_66_PIO_RECOVERY_SHIFT);
break;
default: {
/* 33Mhz cell */
@ -684,11 +597,11 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
recTicks--; /* guess, but it's only for PIO0, so... */
ebit = 1;
}
*timings = ((*timings) & ~TR_33_PIO_MASK) |
t = (t & ~TR_33_PIO_MASK) |
(accessTicks << TR_33_PIO_ACCESS_SHIFT) |
(recTicks << TR_33_PIO_RECOVERY_SHIFT);
if (ebit)
*timings |= TR_33_PIO_E;
t |= TR_33_PIO_E;
break;
}
}
@ -698,9 +611,7 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
drive->name, pio, *timings);
#endif
if (pmac_ide_do_setfeature(drive, XFER_PIO_0 + pio))
return;
*timings = t;
pmac_ide_do_update_timings(drive);
}
@ -746,8 +657,6 @@ set_timings_udma_ata6(u32 *pio_timings, u32 *ultra_timings, u8 speed)
if (speed > XFER_UDMA_5 || t == NULL)
return 1;
tr = kauai_lookup_timing(kauai_udma_timings, (int)t->udma);
if (tr == 0)
return 1;
*ultra_timings = ((*ultra_timings) & ~TR_100_UDMAREG_UDMA_MASK) | tr;
*ultra_timings = (*ultra_timings) | TR_100_UDMAREG_UDMA_EN;
@ -766,8 +675,6 @@ set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed)
if (speed > XFER_UDMA_6 || t == NULL)
return 1;
tr = kauai_lookup_timing(shasta_udma133_timings, (int)t->udma);
if (tr == 0)
return 1;
*ultra_timings = ((*ultra_timings) & ~TR_133_UDMAREG_UDMA_MASK) | tr;
*ultra_timings = (*ultra_timings) | TR_133_UDMAREG_UDMA_EN;
@ -777,12 +684,13 @@ set_timings_udma_shasta(u32 *pio_timings, u32 *ultra_timings, u8 speed)
/*
* Calculate MDMA timings for all cells
*/
static int
static void
set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
u8 speed, int drive_cycle_time)
u8 speed)
{
int cycleTime, accessTime = 0, recTime = 0;
unsigned accessTicks, recTicks;
struct hd_driveid *id = drive->id;
struct mdma_timings_t* tm = NULL;
int i;
@ -792,11 +700,14 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
case 1: cycleTime = 150; break;
case 2: cycleTime = 120; break;
default:
return 1;
BUG();
break;
}
/* Adjust for drive */
if (drive_cycle_time && drive_cycle_time > cycleTime)
cycleTime = drive_cycle_time;
/* Check if drive provides explicit DMA cycle time */
if ((id->field_valid & 2) && id->eide_dma_time)
cycleTime = max_t(int, id->eide_dma_time, cycleTime);
/* OHare limits according to some old Apple sources */
if ((intf_type == controller_ohare) && (cycleTime < 150))
cycleTime = 150;
@ -824,8 +735,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
break;
i++;
}
if (i < 0)
return 1;
cycleTime = tm[i].cycleTime;
accessTime = tm[i].accessTime;
recTime = tm[i].recoveryTime;
@ -839,8 +748,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
case controller_sh_ata6: {
/* 133Mhz cell */
u32 tr = kauai_lookup_timing(shasta_mdma_timings, cycleTime);
if (tr == 0)
return 1;
*timings = ((*timings) & ~TR_133_PIOREG_MDMA_MASK) | tr;
*timings2 = (*timings2) & ~TR_133_UDMAREG_UDMA_EN;
}
@ -848,8 +755,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
case controller_k2_ata6: {
/* 100Mhz cell */
u32 tr = kauai_lookup_timing(kauai_mdma_timings, cycleTime);
if (tr == 0)
return 1;
*timings = ((*timings) & ~TR_100_PIOREG_MDMA_MASK) | tr;
*timings2 = (*timings2) & ~TR_100_UDMAREG_UDMA_EN;
}
@ -911,30 +816,23 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
printk(KERN_ERR "%s: Set MDMA timing for mode %d, reg: 0x%08x\n",
drive->name, speed & 0xf, *timings);
#endif
return 0;
}
#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
/*
* Speedproc. This function is called by the core to set any of the standard
* DMA timing (MDMA or UDMA) to both the drive and the controller.
* You may notice we don't use this function on normal "dma check" operation,
* our dedicated function is more precise as it uses the drive provided
* cycle time value. We should probably fix this one to deal with that too...
*/
static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
int unit = (drive->select.b.unit & 0x01);
int ret = 0;
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
u32 *timings, *timings2;
u32 *timings, *timings2, tl[2];
if (pmif == NULL)
return 1;
timings = &pmif->timings[unit];
timings2 = &pmif->timings[unit+2];
/* Copy timings to local image */
tl[0] = *timings;
tl[1] = *timings2;
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
case XFER_UDMA_6:
@ -945,38 +843,36 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
case XFER_UDMA_1:
case XFER_UDMA_0:
if (pmif->kind == controller_kl_ata4)
ret = set_timings_udma_ata4(timings, speed);
ret = set_timings_udma_ata4(&tl[0], speed);
else if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6)
ret = set_timings_udma_ata6(timings, timings2, speed);
ret = set_timings_udma_ata6(&tl[0], &tl[1], speed);
else if (pmif->kind == controller_sh_ata6)
ret = set_timings_udma_shasta(timings, timings2, speed);
ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
else
ret = 1;
ret = 1;
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
ret = set_timings_mdma(drive, pmif->kind, timings, timings2, speed, 0);
set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
break;
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
return 1;
return;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
default:
ret = 1;
}
if (ret)
return ret;
return;
/* Apply timings to controller */
*timings = tl[0];
*timings2 = tl[1];
ret = pmac_ide_do_setfeature(drive, speed);
if (ret)
return ret;
pmac_ide_do_update_timings(drive);
return 0;
}
/*
@ -1236,6 +1132,10 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
hwif->drives[0].autotune = IDE_TUNE_AUTO;
hwif->drives[1].autotune = IDE_TUNE_AUTO;
hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE;
hwif->pio_mask = ATA_PIO4;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
@ -1244,7 +1144,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->selectproc = pmac_ide_kauai_selectproc;
else
hwif->selectproc = pmac_ide_selectproc;
hwif->speedproc = pmac_ide_tune_chipset;
hwif->set_dma_mode = pmac_ide_set_dma_mode;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
@ -1678,108 +1578,6 @@ pmac_ide_destroy_dmatable (ide_drive_t *drive)
}
}
/*
* Pick up best MDMA timing for the drive and apply it
*/
static int
pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
{
ide_hwif_t *hwif = HWIF(drive);
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
int drive_cycle_time;
struct hd_driveid *id = drive->id;
u32 *timings, *timings2;
u32 timing_local[2];
int ret;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
/* Check if drive provide explicit cycle time */
if ((id->field_valid & 2) && (id->eide_dma_time))
drive_cycle_time = id->eide_dma_time;
else
drive_cycle_time = 0;
/* Copy timings to local image */
timing_local[0] = *timings;
timing_local[1] = *timings2;
/* Calculate controller timings */
ret = set_timings_mdma( drive, pmif->kind,
&timing_local[0],
&timing_local[1],
mode,
drive_cycle_time);
if (ret)
return 0;
/* Set feature on drive */
printk(KERN_INFO "%s: Enabling MultiWord DMA %d\n", drive->name, mode & 0xf);
ret = pmac_ide_do_setfeature(drive, mode);
if (ret) {
printk(KERN_WARNING "%s: Failed !\n", drive->name);
return 0;
}
/* Apply timings to controller */
*timings = timing_local[0];
*timings2 = timing_local[1];
return 1;
}
/*
* Pick up best UDMA timing for the drive and apply it
*/
static int
pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
{
ide_hwif_t *hwif = HWIF(drive);
pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data;
u32 *timings, *timings2;
u32 timing_local[2];
int ret;
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
timings2 = &pmif->timings[(drive->select.b.unit & 0x01) + 2];
/* Copy timings to local image */
timing_local[0] = *timings;
timing_local[1] = *timings2;
/* Calculate timings for interface */
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6)
ret = set_timings_udma_ata6( &timing_local[0],
&timing_local[1],
mode);
else if (pmif->kind == controller_sh_ata6)
ret = set_timings_udma_shasta( &timing_local[0],
&timing_local[1],
mode);
else
ret = set_timings_udma_ata4(&timing_local[0], mode);
if (ret)
return 0;
/* Set feature on drive */
printk(KERN_INFO "%s: Enabling Ultra DMA %d\n", drive->name, mode & 0x0f);
ret = pmac_ide_do_setfeature(drive, mode);
if (ret) {
printk(KERN_WARNING "%s: Failed !\n", drive->name);
return 0;
}
/* Apply timings to controller */
*timings = timing_local[0];
*timings2 = timing_local[1];
return 1;
}
/*
* Check what is the best DMA timing setting for the drive and
* call appropriate functions to apply it.
@ -1787,30 +1585,10 @@ pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
static int
pmac_ide_dma_check(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
int enable = 1;
drive->using_dma = 0;
if (drive->media == ide_floppy)
enable = 0;
if (((id->capability & 1) == 0) && !__ide_dma_good_drive(drive))
enable = 0;
if (__ide_dma_bad_drive(drive))
enable = 0;
if (ide_tune_dma(drive))
return 0;
if (enable) {
u8 mode = ide_max_dma_mode(drive);
if (mode >= XFER_UDMA_0)
drive->using_dma = pmac_ide_udma_enable(drive, mode);
else if (mode >= XFER_MW_DMA_0)
drive->using_dma = pmac_ide_mdma_enable(drive, mode);
hwif->OUTB(0, IDE_CONTROL_REG);
/* Apply settings to controller */
pmac_ide_do_update_timings(drive);
}
return 0;
return -1;
}
/*
@ -2044,7 +1822,10 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x00;
break;
}
}
hwif->autodma = 1;
hwif->drives[1].autodma = hwif->drives[0].autodma = hwif->autodma;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */

35
include/linux/ide.h
View File

@ -681,7 +681,7 @@ typedef struct hwif_s {
u8 straight8; /* Alan's straight 8 check */
u8 bus_state; /* power state of the IDE bus */
u8 host_flags;
u16 host_flags;
u8 pio_mask;
@ -702,10 +702,10 @@ typedef struct hwif_s {
#if 0
ide_hwif_ops_t *hwifops;
#else
/* routine to set PIO mode for drives */
/* routine to program host for PIO mode */
void (*set_pio_mode)(ide_drive_t *, const u8);
/* routine to retune DMA modes for drives */
int (*speedproc)(ide_drive_t *, const u8);
/* routine to program host for DMA mode */
void (*set_dma_mode)(ide_drive_t *, const u8);
/* tweaks hardware to select drive */
void (*selectproc)(ide_drive_t *);
/* chipset polling based on hba specifics */
@ -1079,16 +1079,7 @@ extern void ide_fix_driveid(struct hd_driveid *);
*/
extern void ide_fixstring(u8 *, const int, const int);
/*
* This routine busy-waits for the drive status to be not "busy".
* It then checks the status for all of the "good" bits and none
* of the "bad" bits, and if all is okay it returns 0. All other
* cases return 1 after doing "*startstop = ide_error()", and the
* caller should return the updated value of "startstop" in this case.
* "startstop" is unchanged when the function returns 0;
* (startstop, drive, good, bad, timeout)
*/
extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
/*
* Start a reset operation for an IDE interface.
@ -1162,7 +1153,6 @@ extern void SELECT_MASK(ide_drive_t *, int);
extern void QUIRK_LIST(ide_drive_t *);
extern int drive_is_ready(ide_drive_t *);
extern int wait_for_ready(ide_drive_t *, int /* timeout */);
/*
* taskfile io for disks for now...and builds request from ide_ioctl
@ -1262,6 +1252,15 @@ enum {
IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
/* use 100-102 and 200-202 PIO values to set DMA modes */
IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
/*
* keep DMA setting when programming PIO mode, may be used only
* for hosts which have separate PIO and DMA timings (ie. PMAC)
*/
IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
/* program host for the transfer mode after programming device */
IDE_HFLAG_POST_SET_MODE = (1 << 8),
/* don't program host/device for the transfer mode ("smart" hosts) */
IDE_HFLAG_NO_SET_MODE = (1 << 9),
};
typedef struct ide_pci_device_s {
@ -1278,7 +1277,7 @@ typedef struct ide_pci_device_s {
u8 bootable;
unsigned int extra;
struct ide_pci_device_s *next;
u8 host_flags;
u16 host_flags;
u8 pio_mask;
u8 udma_mask;
} ide_pci_device_t;
@ -1301,7 +1300,6 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
#ifdef CONFIG_BLK_DEV_IDEDMA
int __ide_dma_bad_drive(ide_drive_t *);
int __ide_dma_good_drive(ide_drive_t *);
u8 ide_find_dma_mode(ide_drive_t *, u8);
@ -1420,6 +1418,9 @@ unsigned int ide_pio_cycle_time(ide_drive_t *, u8);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
extern const ide_pio_timings_t ide_pio_timings[6];
int ide_set_pio_mode(ide_drive_t *, u8);
int ide_set_dma_mode(ide_drive_t *, u8);
void ide_set_pio(ide_drive_t *, u8);
static inline void ide_set_max_pio(ide_drive_t *drive)