m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1

use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1 so we can support
those parts that have the pit1 interrupt on other than the first interrupt
controller.

Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This commit is contained in:
Steven King 2012-06-06 14:02:14 -07:00 committed by Greg Ungerer
parent bce4d12bf8
commit bdee4e26ba
5 changed files with 6 additions and 3 deletions

View File

@ -62,6 +62,7 @@
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.

View File

@ -52,6 +52,7 @@
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.

View File

@ -60,6 +60,7 @@
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.

View File

@ -52,7 +52,7 @@
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.
*/

View File

@ -93,7 +93,7 @@ struct clock_event_device cf_pit_clockevent = {
.set_mode = init_cf_pit_timer,
.set_next_event = cf_pit_next_event,
.shift = 32,
.irq = MCFINT_VECBASE + MCFINT_PIT1,
.irq = MCF_IRQ_PIT1,
};
@ -159,7 +159,7 @@ void hw_timer_init(irq_handler_t handler)
clockevent_delta2ns(0x3f, &cf_pit_clockevent);
clockevents_register_device(&cf_pit_clockevent);
setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
setup_irq(MCF_IRQ_PIT1, &pit_irq);
clocksource_register_hz(&pit_clk, FREQ);
}