diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 51ee8ad44687..e4f4f4b18785 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -142,11 +142,13 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) goto setup_sfp_out; } - hw->eeprom.ops.read(hw, ++data_offset, &data_value); + if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) + goto setup_sfp_err; while (data_value != 0xffff) { IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); IXGBE_WRITE_FLUSH(hw); - hw->eeprom.ops.read(hw, ++data_offset, &data_value); + if (hw->eeprom.ops.read(hw, ++data_offset, &data_value)) + goto setup_sfp_err; } /* Release the semaphore */ @@ -192,6 +194,17 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) setup_sfp_out: return ret_val; + +setup_sfp_err: + /* Release the semaphore */ + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* Delay obtaining semaphore again to allow FW access, + * semaphore_delay is in ms usleep_range needs us. + */ + usleep_range(hw->eeprom.semaphore_delay * 1000, + hw->eeprom.semaphore_delay * 2000); + hw_err(hw, "eeprom read at offset %d failed\n", data_offset); + return IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; } static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) @@ -2180,6 +2193,7 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) { s32 status = IXGBE_ERR_EEPROM_VERSION; u16 fw_offset, fw_ptp_cfg_offset; + u16 offset; u16 fw_version = 0; /* firmware check is only necessary for SFI devices */ @@ -2189,29 +2203,35 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) } /* get the offset to the Firmware Module block */ - hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + offset = IXGBE_FW_PTR; + if (hw->eeprom.ops.read(hw, offset, &fw_offset)) + goto fw_version_err; if ((fw_offset == 0) || (fw_offset == 0xFFFF)) goto fw_version_out; /* get the offset to the Pass Through Patch Configuration block */ - hw->eeprom.ops.read(hw, (fw_offset + - IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), - &fw_ptp_cfg_offset); + offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR; + if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset)) + goto fw_version_err; if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) goto fw_version_out; /* get the firmware version */ - hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + - IXGBE_FW_PATCH_VERSION_4), - &fw_version); + offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4; + if (hw->eeprom.ops.read(hw, offset, &fw_version)) + goto fw_version_err; if (fw_version > 0x5) status = 0; fw_version_out: return status; + +fw_version_err: + hw_err(hw, "eeprom read at offset %d failed\n", offset); + return IXGBE_ERR_EEPROM_VERSION; } /** diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 50e62a2b1a65..b5c434b617b1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -2740,13 +2740,19 @@ out: static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, u16 *san_mac_offset) { + s32 ret_val; + /* * First read the EEPROM pointer to see if the MAC addresses are * available. */ - hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, + san_mac_offset); + if (ret_val) + hw_err(hw, "eeprom read at offset %d failed\n", + IXGBE_SAN_MAC_ADDR_PTR); - return 0; + return ret_val; } /** @@ -2763,23 +2769,16 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) { u16 san_mac_data, san_mac_offset; u8 i; + s32 ret_val; /* * First read the EEPROM pointer to see if the MAC addresses are * available. If they're not, no point in calling set_lan_id() here. */ - ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF) - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - /* - * No addresses available in this EEPROM. It's not an - * error though, so just wipe the local address and return. - */ - for (i = 0; i < 6; i++) - san_mac_addr[i] = 0xFF; - - goto san_mac_addr_out; - } + goto san_mac_addr_clr; /* make sure we know which port we need to program */ hw->mac.ops.set_lan_id(hw); @@ -2787,14 +2786,26 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); for (i = 0; i < 3; i++) { - hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + ret_val = hw->eeprom.ops.read(hw, san_mac_offset, + &san_mac_data); + if (ret_val) { + hw_err(hw, "eeprom read at offset %d failed\n", + san_mac_offset); + goto san_mac_addr_clr; + } san_mac_addr[i * 2] = (u8)(san_mac_data); san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); san_mac_offset++; } - -san_mac_addr_out: return 0; + +san_mac_addr_clr: + /* No addresses available in this EEPROM. It's not necessarily an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; + return ret_val; } /** @@ -3243,8 +3254,9 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, *wwpn_prefix = 0xFFFF; /* check if alternative SAN MAC is supported */ - hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, - &alt_san_mac_blk_offset); + offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR; + if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset)) + goto wwn_prefix_err; if ((alt_san_mac_blk_offset == 0) || (alt_san_mac_blk_offset == 0xFFFF)) @@ -3252,19 +3264,26 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, /* check capability in alternative san mac address block */ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; - hw->eeprom.ops.read(hw, offset, &caps); + if (hw->eeprom.ops.read(hw, offset, &caps)) + goto wwn_prefix_err; if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) goto wwn_prefix_out; /* get the corresponding prefix for WWNN/WWPN */ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwnn_prefix); + if (hw->eeprom.ops.read(hw, offset, wwnn_prefix)) + hw_err(hw, "eeprom read at offset %d failed\n", offset); offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwpn_prefix); + if (hw->eeprom.ops.read(hw, offset, wwpn_prefix)) + goto wwn_prefix_err; wwn_prefix_out: return 0; + +wwn_prefix_err: + hw_err(hw, "eeprom read at offset %d failed\n", offset); + return 0; } /** @@ -3778,7 +3797,11 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) u8 sensor_index; u8 sensor_location; - hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor); + if (hw->eeprom.ops.read(hw, ets_offset + 1 + i, &ets_sensor)) { + hw_err(hw, "eeprom read at offset %d failed\n", + ets_offset + 1 + i); + continue; + } sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> IXGBE_ETS_DATA_INDEX_SHIFT); sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h index 1315b8ac7f58..d259dc76604e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -143,8 +143,12 @@ s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw); #define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS) +#define ixgbe_hw_to_netdev(hw) (((struct ixgbe_adapter *)(hw)->back)->netdev) + #define hw_dbg(hw, format, arg...) \ - netdev_dbg(((struct ixgbe_adapter *)(hw->back))->netdev, format, ##arg) + netdev_dbg(ixgbe_hw_to_netdev(hw), format, ## arg) +#define hw_err(hw, format, arg...) \ + netdev_err(ixgbe_hw_to_netdev(hw), format, ## arg) #define e_dev_info(format, arg...) \ dev_info(&adapter->pdev->dev, format, ## arg) #define e_dev_warn(format, arg...) \ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index 369eef526bc1..6a4a7995d3e0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -791,6 +791,8 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) * Read control word from PHY init contents offset */ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + if (ret_val) + goto err_eeprom; control = (eword & IXGBE_CONTROL_MASK_NL) >> IXGBE_CONTROL_SHIFT_NL; edata = eword & IXGBE_DATA_MASK_NL; @@ -803,10 +805,15 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) case IXGBE_DATA_NL: hw_dbg(hw, "DATA:\n"); data_offset++; - hw->eeprom.ops.read(hw, data_offset++, - &phy_offset); + ret_val = hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + if (ret_val) + goto err_eeprom; for (i = 0; i < edata; i++) { - hw->eeprom.ops.read(hw, data_offset, &eword); + ret_val = hw->eeprom.ops.read(hw, data_offset, + &eword); + if (ret_val) + goto err_eeprom; hw->phy.ops.write_reg(hw, phy_offset, MDIO_MMD_PMAPMD, eword); hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, @@ -838,6 +845,10 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) out: return ret_val; + +err_eeprom: + hw_err(hw, "eeprom read at offset %d failed\n", data_offset); + return IXGBE_ERR_PHY; } /** @@ -1339,7 +1350,11 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, sfp_type = ixgbe_sfp_type_srlr_core1; /* Read offset to PHY init contents */ - hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) { + hw_err(hw, "eeprom read at %d failed\n", + IXGBE_PHY_INIT_OFFSET_NL); + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + } if ((!*list_offset) || (*list_offset == 0xFFFF)) return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; @@ -1351,12 +1366,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, * Find the matching SFP ID in the EEPROM * and program the init sequence */ - hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + goto err_phy; while (sfp_id != IXGBE_PHY_INIT_END_NL) { if (sfp_id == sfp_type) { (*list_offset)++; - hw->eeprom.ops.read(hw, *list_offset, data_offset); + if (hw->eeprom.ops.read(hw, *list_offset, data_offset)) + goto err_phy; if ((!*data_offset) || (*data_offset == 0xFFFF)) { hw_dbg(hw, "SFP+ module not supported\n"); return IXGBE_ERR_SFP_NOT_SUPPORTED; @@ -1366,7 +1383,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, } else { (*list_offset) += 2; if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) - return IXGBE_ERR_PHY; + goto err_phy; } } @@ -1376,6 +1393,10 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, } return 0; + +err_phy: + hw_err(hw, "eeprom read at offset %d failed\n", *list_offset); + return IXGBE_ERR_PHY; } /**