[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id()

Make ata_dev_read_id() take @flags instead of @post_reset.  Currently
there is only one flag defined - ATA_READID_POSTRESET, which is
equivalent to @post_reset.  This is preparation for polling presence
detection.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Tejun Heo 2006-11-10 18:08:10 +09:00 committed by Jeff Garzik
parent b3362f88a8
commit bff0464769
3 changed files with 23 additions and 14 deletions

View File

@ -1224,7 +1224,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
* ata_dev_read_id - Read ID data from the specified device
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
* @post_reset: is this read ID post-reset?
* @flags: ATA_READID_* flags
* @id: buffer to read IDENTIFY data into
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
@ -1239,7 +1239,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
* 0 on success, -errno otherwise.
*/
int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
int post_reset, u16 *id)
unsigned int flags, u16 *id)
{
struct ata_port *ap = dev->ap;
unsigned int class = *p_class;
@ -1294,7 +1294,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
goto err_out;
}
if (post_reset && class == ATA_DEV_ATA) {
if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
/*
* The exact sequence expected by certain pre-ATA4 drives is:
* SRST RESET
@ -1314,7 +1314,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
/* current CHS translation info (id[53-58]) might be
* changed. reread the identify device info.
*/
post_reset = 0;
flags &= ~ATA_READID_POSTRESET;
goto retry;
}
}
@ -1643,7 +1643,8 @@ int ata_bus_probe(struct ata_port *ap)
if (!ata_dev_enabled(dev))
continue;
rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
dev->id);
if (rc)
goto fail;
@ -3023,7 +3024,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
/**
* ata_dev_revalidate - Revalidate ATA device
* @dev: device to revalidate
* @post_reset: is this revalidation after reset?
* @readid_flags: read ID flags
*
* Re-read IDENTIFY page and make sure @dev is still attached to
* the port.
@ -3034,7 +3035,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
* RETURNS:
* 0 on success, negative errno otherwise
*/
int ata_dev_revalidate(struct ata_device *dev, int post_reset)
int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
{
unsigned int class = dev->class;
u16 *id = (void *)dev->ap->sector_buf;
@ -3046,7 +3047,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
}
/* read ID data */
rc = ata_dev_read_id(dev, &class, post_reset, id);
rc = ata_dev_read_id(dev, &class, readid_flags, id);
if (rc)
goto fail;

View File

@ -1634,11 +1634,14 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
DPRINTK("ENTER\n");
for (i = 0; i < ATA_MAX_DEVICES; i++) {
unsigned int action;
unsigned int action, readid_flags = 0;
dev = &ap->device[i];
action = ata_eh_dev_action(dev);
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
@ -1646,8 +1649,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
}
ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE);
rc = ata_dev_revalidate(dev,
ehc->i.flags & ATA_EHI_DID_RESET);
rc = ata_dev_revalidate(dev, readid_flags);
if (rc)
break;
@ -1665,7 +1667,8 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
ata_class_enabled(ehc->classes[dev->devno])) {
dev->class = ehc->classes[dev->devno];
rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
rc = ata_dev_read_id(dev, &dev->class, readid_flags,
dev->id);
if (rc == 0) {
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);

View File

@ -39,6 +39,11 @@ struct ata_scsi_args {
};
/* libata-core.c */
enum {
/* flags for ata_dev_read_id() */
ATA_READID_POSTRESET = (1 << 0), /* reading ID after reset */
};
extern struct workqueue_struct *ata_aux_wq;
extern int atapi_enabled;
extern int atapi_dmadir;
@ -52,8 +57,8 @@ extern unsigned ata_exec_internal(struct ata_device *dev,
int dma_dir, void *buf, unsigned int buflen);
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
int post_reset, u16 *id);
extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
unsigned int flags, u16 *id);
extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
extern int ata_dev_configure(struct ata_device *dev);
extern int sata_down_spd_limit(struct ata_port *ap);
extern int sata_set_spd_needed(struct ata_port *ap);