misc: bmp085: Clean up and enable use of interrupt for completion.

- pass IRQ to driver and have it initialize
- finish waiting early if interrupt fires

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Marek Belisko 2013-11-30 16:26:00 +01:00 committed by Greg Kroah-Hartman
parent 612340b155
commit c07f85c5d7
4 changed files with 37 additions and 8 deletions

View File

@ -49,7 +49,7 @@ static int bmp085_i2c_probe(struct i2c_client *client,
return err;
}
return bmp085_probe(&client->dev, regmap);
return bmp085_probe(&client->dev, regmap, client->irq);
}
static int bmp085_i2c_remove(struct i2c_client *client)

View File

@ -41,7 +41,7 @@ static int bmp085_spi_probe(struct spi_device *client)
return err;
}
return bmp085_probe(&client->dev, regmap);
return bmp085_probe(&client->dev, regmap, client->irq);
}
static int bmp085_spi_remove(struct spi_device *client)

View File

@ -49,9 +49,11 @@
#include <linux/device.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/of.h>
#include "bmp085.h"
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/gpio.h>
#define BMP085_CHIP_ID 0x55
#define BMP085_CALIBRATION_DATA_START 0xAA
@ -84,8 +86,19 @@ struct bmp085_data {
unsigned long last_temp_measurement;
u8 chip_id;
s32 b6; /* calculated temperature correction coefficient */
int irq;
struct completion done;
};
static irqreturn_t bmp085_eoc_isr(int irq, void *devid)
{
struct bmp085_data *data = devid;
complete(&data->done);
return IRQ_HANDLED;
}
static s32 bmp085_read_calibration_data(struct bmp085_data *data)
{
u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
@ -116,6 +129,9 @@ static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
s32 status;
mutex_lock(&data->lock);
init_completion(&data->done);
status = regmap_write(data->regmap, BMP085_CTRL_REG,
BMP085_TEMP_MEASUREMENT);
if (status < 0) {
@ -123,7 +139,8 @@ static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
"Error while requesting temperature measurement.\n");
goto exit;
}
msleep(BMP085_TEMP_CONVERSION_TIME);
wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies(
BMP085_TEMP_CONVERSION_TIME));
status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
&tmp, sizeof(tmp));
@ -147,6 +164,9 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
s32 status;
mutex_lock(&data->lock);
init_completion(&data->done);
status = regmap_write(data->regmap, BMP085_CTRL_REG,
BMP085_PRESSURE_MEASUREMENT +
(data->oversampling_setting << 6));
@ -157,8 +177,8 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
}
/* wait for the end of conversion */
msleep(2+(3 << data->oversampling_setting));
wait_for_completion_timeout(&data->done, 1 + msecs_to_jiffies(
2+(3 << data->oversampling_setting)));
/* copy data into a u32 (4 bytes), but skip the first byte. */
status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
((u8 *)&tmp)+1, 3);
@ -420,7 +440,7 @@ struct regmap_config bmp085_regmap_config = {
};
EXPORT_SYMBOL_GPL(bmp085_regmap_config);
int bmp085_probe(struct device *dev, struct regmap *regmap)
int bmp085_probe(struct device *dev, struct regmap *regmap, int irq)
{
struct bmp085_data *data;
int err = 0;
@ -434,6 +454,15 @@ int bmp085_probe(struct device *dev, struct regmap *regmap)
dev_set_drvdata(dev, data);
data->dev = dev;
data->regmap = regmap;
data->irq = irq;
if (data->irq > 0) {
err = devm_request_irq(dev, data->irq, bmp085_eoc_isr,
IRQF_TRIGGER_RISING, "bmp085",
data);
if (err < 0)
goto exit_free;
}
/* Initialize the BMP085 chip */
err = bmp085_init_client(data);

View File

@ -26,7 +26,7 @@
extern struct regmap_config bmp085_regmap_config;
int bmp085_probe(struct device *dev, struct regmap *regmap);
int bmp085_probe(struct device *dev, struct regmap *regmap, int irq);
int bmp085_remove(struct device *dev);
int bmp085_detect(struct device *dev);