[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}

Changes include:

1. rename MFP_LPM_WAKEUP_ENABLE into MFP_LPM_CAN_WAKEUP to indicate
   the board capability of this pin to wakeup the system

2. add gpio_set_wake() and keypad_set_wake() to allow dynamically
   enable/disable wakeup from GPIOs and keypad GPIO

   * these functions are currently kept in mfp-pxa2xx.c due to their
     dependency to the MFP configuration

3. pxa2xx_mfp_config() only gives early warning if MFP_LPM_CAN_WAKEUP
   is set on incorrect pins

So that the GPIO's wakeup capability is now decided by the following:

   a) processor's capability: (only those GPIOs which have dedicated
      bits within PWER/PRER/PFER can wakeup the system), this is
      initialized by pxa{25x,27x}_init_mfp()

   b) board design decides:
      - whether the pin is designed to wakeup the system (some of
        the GPIOs are configured as other functions, which is not
        intended to be a wakeup source), by OR'ing the pin config
        with MFP_LPM_CAN_WAKEUP

      - which edge the pin is designed to wakeup the system, this
        may depends on external peripherals/connections, which is
        totally board specific; this is indicated by MFP_LPM_EDGE_*

   c) the corresponding device's (most likely the gpio_keys.c) wakeup
      attribute:

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
eric miao 2008-03-11 09:46:28 +08:00 committed by Russell King
parent 9b02b2df00
commit c0a596d6a1
5 changed files with 90 additions and 67 deletions

View File

@ -28,15 +28,17 @@
#define PWER_WE35 (1 << 24)
static struct {
struct gpio_desc {
unsigned valid : 1;
unsigned can_wakeup : 1;
unsigned keypad_gpio : 1;
unsigned int mask; /* bit mask in PWER or PKWR */
unsigned long config;
} gpio_desc[MFP_PIN_GPIO127 + 1];
};
static inline int __mfp_config_gpio(unsigned gpio, unsigned long c)
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
static int __mfp_config_gpio(unsigned gpio, unsigned long c)
{
unsigned long gafr, mask = GPIO_bit(gpio);
int fn;
@ -70,26 +72,19 @@ static inline int __mfp_config_gpio(unsigned gpio, unsigned long c)
return -EINVAL;
}
/* wakeup enabling */
if ((c & MFP_LPM_WAKEUP_ENABLE) == 0)
return 0;
if (!gpio_desc[gpio].can_wakeup || c & MFP_DIR_OUT) {
/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
* configurations of those pins not able to wakeup
*/
if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
pr_warning("%s: GPIO%d unable to wakeup\n",
__func__, gpio);
return -EINVAL;
}
if (gpio_desc[gpio].keypad_gpio)
PKWR |= gpio_desc[gpio].mask;
else {
PWER |= gpio_desc[gpio].mask;
if (c & MFP_LPM_EDGE_RISE)
PRER |= gpio_desc[gpio].mask;
if (c & MFP_LPM_EDGE_FALL)
PFER |= gpio_desc[gpio].mask;
if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
pr_warning("%s: output GPIO%d unable to wakeup\n",
__func__, gpio);
return -EINVAL;
}
return 0;
@ -120,6 +115,45 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
}
}
int gpio_set_wake(unsigned int gpio, unsigned int on)
{
struct gpio_desc *d;
unsigned long c;
if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
return -EINVAL;
d = &gpio_desc[gpio];
c = d->config;
if (!d->valid)
return -EINVAL;
if (d->keypad_gpio)
return -EINVAL;
if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
if (on) {
PWER |= d->mask;
if (c & MFP_LPM_EDGE_RISE)
PRER |= d->mask;
else
PRER &= ~d->mask;
if (c & MFP_LPM_EDGE_FALL)
PFER |= d->mask;
else
PFER &= ~d->mask;
} else {
PWER &= ~d->mask;
PRER &= ~d->mask;
PFER &= ~d->mask;
}
}
return 0;
}
#ifdef CONFIG_PXA25x
static int __init pxa25x_mfp_init(void)
{
@ -141,11 +175,32 @@ postcore_initcall(pxa25x_mfp_init);
#endif /* CONFIG_PXA25x */
#ifdef CONFIG_PXA27x
static int pxa27x_pkwr_gpio[] __initdata = {
static int pxa27x_pkwr_gpio[] = {
13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94,
95, 96, 97, 98, 99, 100, 101, 102
};
int keypad_set_wake(unsigned int on)
{
unsigned int i, gpio, mask = 0;
if (!on) {
PKWR = 0;
return 0;
}
for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
gpio = pxa27x_pkwr_gpio[i];
if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP)
mask |= gpio_desc[gpio].mask;
}
PKWR = mask;
return 0;
}
static int __init pxa27x_mfp_init(void)
{
int i, gpio;

View File

@ -26,6 +26,7 @@
#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/mfp-pxa25x.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>
@ -230,24 +231,10 @@ static inline void pxa25x_init_pm(void) {}
static int pxa25x_set_wake(unsigned int irq, unsigned int on)
{
int gpio = IRQ_TO_GPIO(irq);
uint32_t gpio_bit, mask = 0;
uint32_t mask = 0;
if (gpio >= 0 && gpio <= 15) {
gpio_bit = GPIO_bit(gpio);
mask = gpio_bit;
if (on) {
if (GRER(gpio) | gpio_bit)
PRER |= gpio_bit;
else
PRER &= ~gpio_bit;
if (GFER(gpio) | gpio_bit)
PFER |= gpio_bit;
else
PFER &= ~gpio_bit;
}
goto set_pwer;
}
if (gpio >= 0 && gpio < 85)
return gpio_set_wake(gpio, on);
if (irq == IRQ_RTCAlrm) {
mask = PWER_RTC;

View File

@ -23,6 +23,7 @@
#include <asm/arch/irqs.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pm.h>
#include <asm/arch/dma.h>
@ -286,37 +287,16 @@ static inline void pxa27x_init_pm(void) {}
/* PXA27x: Various gpios can issue wakeup events. This logic only
* handles the simple cases, not the WEMUX2 and WEMUX3 options
*/
#define PXA27x_GPIO_NOWAKE_MASK \
((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
#define WAKEMASK(gpio) \
(((gpio) <= 15) \
? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
: ((gpio == 35) ? (1 << 24) : 0))
static int pxa27x_set_wake(unsigned int irq, unsigned int on)
{
int gpio = IRQ_TO_GPIO(irq);
uint32_t mask;
if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
if (WAKEMASK(gpio) == 0)
return -EINVAL;
if (gpio >= 0 && gpio < 128)
return gpio_set_wake(gpio, on);
mask = WAKEMASK(gpio);
if (on) {
if (GRER(gpio) | GPIO_bit(gpio))
PRER |= mask;
else
PRER &= ~mask;
if (GFER(gpio) | GPIO_bit(gpio))
PFER |= mask;
else
PFER &= ~mask;
}
goto set_pwer;
}
if (irq == IRQ_KEYPAD)
return keypad_set_wake(on);
switch (irq) {
case IRQ_RTCAlrm:
@ -329,7 +309,6 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
return -EINVAL;
}
set_pwer:
if (on)
PWER |= mask;
else

View File

@ -428,4 +428,5 @@
#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2)
#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
extern int keypad_set_wake(unsigned int on);
#endif /* __ASM_ARCH_MFP_PXA27X_H */

View File

@ -24,13 +24,13 @@
#define MFP_DIR_MASK (0x1 << 23)
#define MFP_DIR(x) (((x) >> 23) & 0x1)
#define MFP_LPM_WAKEUP_ENABLE (0x1 << 24)
#define WAKEUP_ON_EDGE_RISE (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_RISE)
#define WAKEUP_ON_EDGE_FALL (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_FALL)
#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_WAKEUP_ENABLE | MFP_LPM_EDGE_BOTH)
#define MFP_LPM_CAN_WAKEUP (0x1 << 24)
#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
/* specifically for enabling wakeup on keypad GPIOs */
#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_WAKEUP_ENABLE)
#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP)
#define MFP_CFG_IN(pin, af) \
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
@ -128,4 +128,5 @@
#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0)
extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
extern int gpio_set_wake(unsigned int gpio, unsigned int on);
#endif /* __ASM_ARCH_MFP_PXA2XX_H */