From c1b9ab67e7c7021be9d0db6345d6ccc5d70248f1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 18 Sep 2010 17:31:16 +0200 Subject: [PATCH] bq27x00: Give more specific reports on battery status The current code only reports whether the battery is charging or discharging. But the battery also reports whether it is fully charged, furthermore by look at if the battery is supplied we can tell whether it is discharging or not charging. Signed-off-by: Lars-Peter Clausen Acked-by: Rodolfo Giometti Tested-by: Grazvydas Ignotas --- drivers/power/bq27x00_battery.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 0e99d02dea33..003be5f1c785 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -54,6 +54,7 @@ #define BQ27000_REG_RSOC 0x0B /* Relative State-of-Charge */ #define BQ27000_REG_ILMD 0x76 /* Initial last measured discharge */ #define BQ27000_FLAG_CHGS BIT(7) +#define BQ27000_FLAG_FC BIT(5) #define BQ27500_REG_SOC 0x2c #define BQ27500_REG_DCAP 0x3C /* Design capacity */ @@ -365,8 +366,12 @@ static int bq27x00_battery_status(struct bq27x00_device_info *di, else status = POWER_SUPPLY_STATUS_CHARGING; } else { - if (di->cache.flags & BQ27000_FLAG_CHGS) + if (di->cache.flags & BQ27000_FLAG_FC) + status = POWER_SUPPLY_STATUS_FULL; + else if (di->cache.flags & BQ27000_FLAG_CHGS) status = POWER_SUPPLY_STATUS_CHARGING; + else if (power_supply_am_i_supplied(&di->bat)) + status = POWER_SUPPLY_STATUS_NOT_CHARGING; else status = POWER_SUPPLY_STATUS_DISCHARGING; }