From 187e52cc3c9f5ee64136f8b5c4edcb4cf94693e7 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 17 Sep 2013 18:41:20 +0300
Subject: [PATCH 01/11] wlcore: ROC on AP channel before auth reply

Start a ROC on the AP channel beforing sending the authentication reply
to a connecting STA. This ROC is held up to 1 second via a timer. If the
station is authorized and added by mac80211, the ROC is extended until
the station is fully authorized.
We make sure not to ROC twice when several stations are connecting in
parallel and to only release the ROC when both the pending-reply timer
and the STA-state callbacks do not require it.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/main.c     | 101 ++++++++++++++++++----
 drivers/net/wireless/ti/wlcore/tx.c       |  25 ++++--
 drivers/net/wireless/ti/wlcore/tx.h       |   3 +
 drivers/net/wireless/ti/wlcore/wlcore.h   |   2 +
 drivers/net/wireless/ti/wlcore/wlcore_i.h |   9 ++
 5 files changed, 120 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index c30e1f19d8d3..3c7b8a4e74d1 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2008,6 +2008,47 @@ out:
 	mutex_unlock(&wl->mutex);
 }
 
+static void wlcore_pending_auth_complete_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct wl1271 *wl;
+	struct wl12xx_vif *wlvif;
+	unsigned long time_spare;
+	int ret;
+
+	dwork = container_of(work, struct delayed_work, work);
+	wlvif = container_of(dwork, struct wl12xx_vif,
+			     pending_auth_complete_work);
+	wl = wlvif->wl;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state != WLCORE_STATE_ON))
+		goto out;
+
+	/*
+	 * Make sure a second really passed since the last auth reply. Maybe
+	 * a second auth reply arrived while we were stuck on the mutex.
+	 * Check for a little less than the timeout to protect from scheduler
+	 * irregularities.
+	 */
+	time_spare = jiffies +
+			msecs_to_jiffies(WLCORE_PEND_AUTH_ROC_TIMEOUT - 50);
+	if (!time_after(time_spare, wlvif->pending_auth_reply_time))
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
+	/* cancel the ROC if active */
+	wlcore_update_inconn_sta(wl, wlvif, NULL, false);
+
+	wl1271_ps_elp_sleep(wl);
+out:
+	mutex_unlock(&wl->mutex);
+}
+
 static int wl12xx_allocate_rate_policy(struct wl1271 *wl, u8 *idx)
 {
 	u8 policy = find_first_zero_bit(wl->rate_policies_map,
@@ -2159,6 +2200,8 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif)
 			  wlcore_channel_switch_work);
 	INIT_DELAYED_WORK(&wlvif->connection_loss_work,
 			  wlcore_connection_loss_work);
+	INIT_DELAYED_WORK(&wlvif->pending_auth_complete_work,
+			  wlcore_pending_auth_complete_work);
 	INIT_LIST_HEAD(&wlvif->list);
 
 	setup_timer(&wlvif->rx_streaming_timer, wl1271_rx_streaming_timer,
@@ -2590,6 +2633,7 @@ unlock:
 	cancel_work_sync(&wlvif->rx_streaming_disable_work);
 	cancel_delayed_work_sync(&wlvif->connection_loss_work);
 	cancel_delayed_work_sync(&wlvif->channel_switch_work);
+	cancel_delayed_work_sync(&wlvif->pending_auth_complete_work);
 
 	mutex_lock(&wl->mutex);
 }
@@ -3969,6 +4013,13 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl,
 			}
 		} else {
 			if (test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) {
+				/*
+				 * AP might be in ROC in case we have just
+				 * sent auth reply. handle it.
+				 */
+				if (test_bit(wlvif->role_id, wl->roc_map))
+					wl12xx_croc(wl, wlvif->role_id);
+
 				ret = wl12xx_cmd_role_stop_ap(wl, wlvif);
 				if (ret < 0)
 					goto out;
@@ -4656,29 +4707,49 @@ static void wlcore_roc_if_possible(struct wl1271 *wl,
 	wl12xx_roc(wl, wlvif, wlvif->role_id, wlvif->band, wlvif->channel);
 }
 
-static void wlcore_update_inconn_sta(struct wl1271 *wl,
-				     struct wl12xx_vif *wlvif,
-				     struct wl1271_station *wl_sta,
-				     bool in_connection)
+/*
+ * when wl_sta is NULL, we treat this call as if coming from a
+ * pending auth reply.
+ * wl->mutex must be taken and the FW must be awake when the call
+ * takes place.
+ */
+void wlcore_update_inconn_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			      struct wl1271_station *wl_sta, bool in_conn)
 {
-	if (in_connection) {
-		if (WARN_ON(wl_sta->in_connection))
+	if (in_conn) {
+		if (WARN_ON(wl_sta && wl_sta->in_connection))
 			return;
-		wl_sta->in_connection = true;
-		if (!wlvif->inconn_count++)
+
+		if (!wlvif->ap_pending_auth_reply &&
+		    !wlvif->inconn_count)
 			wlcore_roc_if_possible(wl, wlvif);
+
+		if (wl_sta) {
+			wl_sta->in_connection = true;
+			wlvif->inconn_count++;
+		} else {
+			wlvif->ap_pending_auth_reply = true;
+		}
 	} else {
-		if (!wl_sta->in_connection)
+		if (wl_sta && !wl_sta->in_connection)
 			return;
 
-		wl_sta->in_connection = false;
-		wlvif->inconn_count--;
-		if (WARN_ON(wlvif->inconn_count < 0))
+		if (WARN_ON(!wl_sta && !wlvif->ap_pending_auth_reply))
 			return;
 
-		if (!wlvif->inconn_count)
-			if (test_bit(wlvif->role_id, wl->roc_map))
-				wl12xx_croc(wl, wlvif->role_id);
+		if (WARN_ON(wl_sta && !wlvif->inconn_count))
+			return;
+
+		if (wl_sta) {
+			wl_sta->in_connection = false;
+			wlvif->inconn_count--;
+		} else {
+			wlvif->ap_pending_auth_reply = false;
+		}
+
+		if (!wlvif->inconn_count && !wlvif->ap_pending_auth_reply &&
+		    test_bit(wlvif->role_id, wl->roc_map))
+			wl12xx_croc(wl, wlvif->role_id);
 	}
 }
 
diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 7e93fe63a2c7..03249da9703a 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -86,19 +86,34 @@ void wl1271_free_tx_id(struct wl1271 *wl, int id)
 EXPORT_SYMBOL(wl1271_free_tx_id);
 
 static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl,
+						 struct wl12xx_vif *wlvif,
 						 struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr;
 
+	hdr = (struct ieee80211_hdr *)(skb->data +
+				       sizeof(struct wl1271_tx_hw_descr));
+	if (!ieee80211_is_auth(hdr->frame_control))
+		return;
+
 	/*
 	 * add the station to the known list before transmitting the
 	 * authentication response. this way it won't get de-authed by FW
 	 * when transmitting too soon.
 	 */
-	hdr = (struct ieee80211_hdr *)(skb->data +
-				       sizeof(struct wl1271_tx_hw_descr));
-	if (ieee80211_is_auth(hdr->frame_control))
-		wl1271_acx_set_inconnection_sta(wl, hdr->addr1);
+	wl1271_acx_set_inconnection_sta(wl, hdr->addr1);
+
+	/*
+	 * ROC for 1 second on the AP channel for completing the connection.
+	 * Note the ROC will be continued by the update_sta_state callbacks
+	 * once the station reaches the associated state.
+	 */
+	wlcore_update_inconn_sta(wl, wlvif, NULL, true);
+	wlvif->pending_auth_reply_time = jiffies;
+	cancel_delayed_work(&wlvif->pending_auth_complete_work);
+	ieee80211_queue_delayed_work(wl->hw,
+				&wlvif->pending_auth_complete_work,
+				msecs_to_jiffies(WLCORE_PEND_AUTH_ROC_TIMEOUT));
 }
 
 static void wl1271_tx_regulate_link(struct wl1271 *wl,
@@ -404,7 +419,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	wl1271_tx_fill_hdr(wl, wlvif, skb, extra, info, hlid);
 
 	if (!is_dummy && wlvif && wlvif->bss_type == BSS_TYPE_AP_BSS) {
-		wl1271_tx_ap_update_inconnection_sta(wl, skb);
+		wl1271_tx_ap_update_inconnection_sta(wl, wlvif, skb);
 		wl1271_tx_regulate_link(wl, wlvif, hlid);
 	}
 
diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h
index 55aa4acf9105..35489c300da1 100644
--- a/drivers/net/wireless/ti/wlcore/tx.h
+++ b/drivers/net/wireless/ti/wlcore/tx.h
@@ -56,6 +56,9 @@
 /* Used for management frames and dummy packets */
 #define WL1271_TID_MGMT 7
 
+/* stop a ROC for pending authentication reply after this time (ms) */
+#define WLCORE_PEND_AUTH_ROC_TIMEOUT     1000
+
 struct wl127x_tx_mem {
 	/*
 	 * Number of extra memory blocks to allocate for this packet
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index 0034979e97cb..54ce5d5e84db 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -481,6 +481,8 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 		   struct ieee80211_sta *sta,
 		   struct ieee80211_key_conf *key_conf);
 void wlcore_regdomain_config(struct wl1271 *wl);
+void wlcore_update_inconn_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+			      struct wl1271_station *wl_sta, bool in_conn);
 
 static inline void
 wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band,
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index e5e146435fe7..14fd1111cfd6 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -456,6 +456,15 @@ struct wl12xx_vif {
 	 */
 	int hw_queue_base;
 
+	/* do we have a pending auth reply? (and ROC) */
+	bool ap_pending_auth_reply;
+
+	/* time when we sent the pending auth reply */
+	unsigned long pending_auth_reply_time;
+
+	/* work for canceling ROC after pending auth reply */
+	struct delayed_work pending_auth_complete_work;
+
 	/*
 	 * This struct must be last!
 	 * data that has to be saved acrossed reconfigs (e.g. recovery)

From dd491ffbaad83ccd6c99851a3c2d4b1ed75211fc Mon Sep 17 00:00:00 2001
From: Yair Shapira <yair.shapira@ti.com>
Date: Tue, 17 Sep 2013 18:41:21 +0300
Subject: [PATCH 02/11] wlcore: add new plt power-mode: CHIP_AWAKE

Under this mode the chip is powered on including sdio
but no FW is downloaded and run, interrupts are not enabled, etc...

This mode is intended to allow RTTT to bridge sdio as a transport
to the chip.

Driver only provides sdio access using the dev_mem debugfs file.

Some fixes done to the code that ensures that PLT mode and normal
driver power mode (ifconfig/add_interface) are mutually excluded.

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/main.c     | 16 ++++++++++++----
 drivers/net/wireless/ti/wlcore/testmode.c | 13 +++++++++++--
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  1 +
 3 files changed, 24 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 3c7b8a4e74d1..7a1a435fa625 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -1062,7 +1062,8 @@ int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode)
 	static const char* const PLT_MODE[] = {
 		"PLT_OFF",
 		"PLT_ON",
-		"PLT_FEM_DETECT"
+		"PLT_FEM_DETECT",
+		"PLT_CHIP_AWAKE"
 	};
 
 	int ret;
@@ -1088,9 +1089,11 @@ int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode)
 		if (ret < 0)
 			goto power_off;
 
-		ret = wl->ops->plt_init(wl);
-		if (ret < 0)
-			goto power_off;
+		if (plt_mode != PLT_CHIP_AWAKE) {
+			ret = wl->ops->plt_init(wl);
+			if (ret < 0)
+				goto power_off;
+		}
 
 		wl->state = WLCORE_STATE_ON;
 		wl1271_notice("firmware booted in PLT mode %s (%s)",
@@ -2419,6 +2422,11 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 	int ret = 0;
 	u8 role_type;
 
+	if (wl->plt) {
+		wl1271_error("Adding Interface not allowed while in PLT mode");
+		return -EBUSY;
+	}
+
 	vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER |
 			     IEEE80211_VIF_SUPPORTS_CQM_RSSI;
 
diff --git a/drivers/net/wireless/ti/wlcore/testmode.c b/drivers/net/wireless/ti/wlcore/testmode.c
index 527590f2adfb..a3b7d950d8e9 100644
--- a/drivers/net/wireless/ti/wlcore/testmode.c
+++ b/drivers/net/wireless/ti/wlcore/testmode.c
@@ -297,7 +297,8 @@ static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[])
 		ret = wl1271_plt_stop(wl);
 		break;
 	case PLT_ON:
-		ret = wl1271_plt_start(wl, PLT_ON);
+	case PLT_CHIP_AWAKE:
+		ret = wl1271_plt_start(wl, val);
 		break;
 	case PLT_FEM_DETECT:
 		ret = wl1271_tm_detect_fem(wl, tb);
@@ -361,6 +362,7 @@ int wl1271_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 {
 	struct wl1271 *wl = hw->priv;
 	struct nlattr *tb[WL1271_TM_ATTR_MAX + 1];
+	u32 nla_cmd;
 	int err;
 
 	err = nla_parse(tb, WL1271_TM_ATTR_MAX, data, len, wl1271_tm_policy);
@@ -370,7 +372,14 @@ int wl1271_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	if (!tb[WL1271_TM_ATTR_CMD_ID])
 		return -EINVAL;
 
-	switch (nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID])) {
+	nla_cmd = nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID]);
+
+	/* Only SET_PLT_MODE is allowed in case of mode PLT_CHIP_AWAKE */
+	if (wl->plt_mode == PLT_CHIP_AWAKE &&
+	    nla_cmd != WL1271_TM_CMD_SET_PLT_MODE)
+		return -EOPNOTSUPP;
+
+	switch (nla_cmd) {
 	case WL1271_TM_CMD_TEST:
 		return wl1271_tm_cmd_test(wl, tb);
 	case WL1271_TM_CMD_INTERROGATE:
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 14fd1111cfd6..3f4f08ba61b7 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -307,6 +307,7 @@ enum plt_mode {
 	PLT_OFF = 0,
 	PLT_ON = 1,
 	PLT_FEM_DETECT = 2,
+	PLT_CHIP_AWAKE = 3
 };
 
 struct wl12xx_rx_filter_field {

From e7441ce48156572cb81efe1781aac6c7eb1c5323 Mon Sep 17 00:00:00 2001
From: Yair Shapira <yair.shapira@ti.com>
Date: Tue, 17 Sep 2013 18:41:22 +0300
Subject: [PATCH 03/11] wlcore: disable elp sleep while in plt mode

We now disable elp sleep during plt mode to allow normal operation of
plt tools such as calibrator.

Having elp_sleep enabled during plt mode is actually not required and
in fact it disrupt plt operations such as rx statistics etc.

Signed-off-by: Yair Shapira <yair.shapira@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/ps.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c
index 98066d40c2ad..26bfc365ba70 100644
--- a/drivers/net/wireless/ti/wlcore/ps.c
+++ b/drivers/net/wireless/ti/wlcore/ps.c
@@ -83,6 +83,10 @@ void wl1271_ps_elp_sleep(struct wl1271 *wl)
 	struct wl12xx_vif *wlvif;
 	u32 timeout;
 
+	/* We do not enter elp sleep in PLT mode */
+	if (wl->plt)
+		return;
+
 	if (wl->sleep_auth != WL1271_PSM_ELP)
 		return;
 

From b0ed8a4d39c9be5ce2a73970502b03b125971142 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 17 Sep 2013 18:41:23 +0300
Subject: [PATCH 04/11] wlcore: re-enable idle handling

We need some stuff done on idle change, most notably we have to stop
sched-scanning. Take care of this by reintroducing idle handling.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/main.c     | 22 ++++++++++++++++++++++
 drivers/net/wireless/ti/wlcore/wlcore_i.h |  1 +
 2 files changed, 23 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 7a1a435fa625..131e60f3e316 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -2927,6 +2927,25 @@ static void wl1271_set_band_rate(struct wl1271 *wl, struct wl12xx_vif *wlvif)
 	wlvif->rate_set = wlvif->basic_rate_set;
 }
 
+static void wl1271_sta_handle_idle(struct wl1271 *wl, struct wl12xx_vif *wlvif,
+				   bool idle)
+{
+	bool cur_idle = !test_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags);
+
+	if (idle == cur_idle)
+		return;
+
+	if (idle) {
+		clear_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags);
+	} else {
+		/* The current firmware only supports sched_scan in idle */
+		if (wl->sched_vif == wlvif)
+			wl->ops->sched_scan_stop(wl, wlvif);
+
+		set_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags);
+	}
+}
+
 static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 			     struct ieee80211_conf *conf, u32 changed)
 {
@@ -4179,6 +4198,9 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 		do_join = true;
 	}
 
+	if (changed & BSS_CHANGED_IDLE && !is_ibss)
+		wl1271_sta_handle_idle(wl, wlvif, bss_conf->idle);
+
 	if (changed & BSS_CHANGED_CQM) {
 		bool enable = false;
 		if (bss_conf->cqm_rssi_thold)
diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h
index 3f4f08ba61b7..2a50e089b0e7 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore_i.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h
@@ -255,6 +255,7 @@ enum wl12xx_vif_flags {
 	WLVIF_FLAG_CS_PROGRESS,
 	WLVIF_FLAG_AP_PROBE_RESP_SET,
 	WLVIF_FLAG_IN_USE,
+	WLVIF_FLAG_ACTIVE,
 };
 
 struct wl12xx_vif;

From 0fe72086afcb3fa685ff8bfa8c975d826b245f25 Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Tue, 17 Sep 2013 18:41:24 +0300
Subject: [PATCH 05/11] wlcore: cleanup scan debug prints

Remove scan debug dumps which are rarely used.
Make scan debug prints more clear and short.

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/cmd.c  |  6 +++---
 drivers/net/wireless/ti/wlcore/scan.c | 27 +++++++++++++--------------
 2 files changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index c9e060795d13..e3ae425381e5 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -1126,6 +1126,8 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	u16 template_id_2_4 = wl->scan_templ_id_2_4;
 	u16 template_id_5 = wl->scan_templ_id_5;
 
+	wl1271_debug(DEBUG_SCAN, "build probe request band %d", band);
+
 	skb = ieee80211_probereq_get(wl->hw, vif, ssid, ssid_len,
 				     ie_len);
 	if (!skb) {
@@ -1135,8 +1137,6 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 	if (ie_len)
 		memcpy(skb_put(skb, ie_len), ie, ie_len);
 
-	wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len);
-
 	if (sched_scan &&
 	    (wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL)) {
 		template_id_2_4 = wl->sched_scan_templ_id_2_4;
@@ -1172,7 +1172,7 @@ struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl,
 	if (!skb)
 		goto out;
 
-	wl1271_dump(DEBUG_SCAN, "AP PROBE REQ: ", skb->data, skb->len);
+	wl1271_debug(DEBUG_SCAN, "set ap probe request template");
 
 	rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[wlvif->band]);
 	if (wlvif->band == IEEE80211_BAND_2GHZ)
diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c
index f407101e525b..13e743df2e31 100644
--- a/drivers/net/wireless/ti/wlcore/scan.c
+++ b/drivers/net/wireless/ti/wlcore/scan.c
@@ -174,17 +174,7 @@ wlcore_scan_get_channels(struct wl1271 *wl,
 		    /* if radar is set, we ignore the passive flag */
 		    (radar ||
 		     !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
-			wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
-				     req_channels[i]->band,
-				     req_channels[i]->center_freq);
-			wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X",
-				     req_channels[i]->hw_value,
-				     req_channels[i]->flags);
-			wl1271_debug(DEBUG_SCAN, "max_power %d",
-				     req_channels[i]->max_power);
-			wl1271_debug(DEBUG_SCAN, "min_dwell_time %d max dwell time %d",
-				     min_dwell_time_active,
-				     max_dwell_time_active);
+
 
 			if (flags & IEEE80211_CHAN_RADAR) {
 				channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
@@ -222,6 +212,17 @@ wlcore_scan_get_channels(struct wl1271 *wl,
 					     *n_pactive_ch);
 			}
 
+			wl1271_debug(DEBUG_SCAN, "freq %d, ch. %d, flags 0x%x, power %d, min/max_dwell %d/%d%s%s",
+				     req_channels[i]->center_freq,
+				     req_channels[i]->hw_value,
+				     req_channels[i]->flags,
+				     req_channels[i]->max_power,
+				     min_dwell_time_active,
+				     max_dwell_time_active,
+				     flags & IEEE80211_CHAN_RADAR ?
+					", DFS" : "",
+				     flags & IEEE80211_CHAN_PASSIVE_SCAN ?
+					", PASSIVE" : "");
 			j++;
 		}
 	}
@@ -364,7 +365,7 @@ wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl,
 	struct cfg80211_ssid *ssids = req->ssids;
 	int ret = 0, type, i, j, n_match_ssids = 0;
 
-	wl1271_debug(DEBUG_CMD, "cmd sched scan ssid list");
+	wl1271_debug((DEBUG_CMD | DEBUG_SCAN), "cmd sched scan ssid list");
 
 	/* count the match sets that contain SSIDs */
 	for (i = 0; i < req->n_match_sets; i++)
@@ -442,8 +443,6 @@ wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl,
 		}
 	}
 
-	wl1271_dump(DEBUG_SCAN, "SSID_LIST: ", cmd, sizeof(*cmd));
-
 	ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_SSID_CFG, cmd,
 			      sizeof(*cmd), 0);
 	if (ret < 0) {

From bf9d5d28aabc6e420a0b6fb3a24b93046878e864 Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Tue, 17 Sep 2013 18:41:25 +0300
Subject: [PATCH 06/11] wlcore: fix unsafe dereference of the wlvif

wlvif could be passed as NULL from the wlcore_tx_work_locked()
to the wl1271_prepare_tx_frame() and to wl1271_skb_queue_head()
functions. This may lead to a Kernel panic, fix this by
validating that wlvif != NULL.

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c
index 03249da9703a..87cd707affa2 100644
--- a/drivers/net/wireless/ti/wlcore/tx.c
+++ b/drivers/net/wireless/ti/wlcore/tx.c
@@ -401,7 +401,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		is_wep = (cipher == WLAN_CIPHER_SUITE_WEP40) ||
 			 (cipher == WLAN_CIPHER_SUITE_WEP104);
 
-		if (WARN_ON(is_wep && wlvif->default_key != idx)) {
+		if (WARN_ON(is_wep && wlvif && wlvif->default_key != idx)) {
 			ret = wl1271_set_default_wep_key(wl, wlvif, idx);
 			if (ret < 0)
 				return ret;

From 7ca38a98ca4b1c5e0d243a712d9eb84afdfe2747 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 17 Sep 2013 18:41:26 +0300
Subject: [PATCH 07/11] wlcore: remove unsupported channels

The fw doesn't support channels 7,9,11 in 5ghz band,
so don't advertise supporting them.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index 131e60f3e316..d8d006fe535e 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5414,10 +5414,7 @@ static struct ieee80211_rate wl1271_rates_5ghz[] = {
 
 /* 5 GHz band channels for WL1273 */
 static struct ieee80211_channel wl1271_channels_5ghz[] = {
-	{ .hw_value = 7, .center_freq = 5035, .max_power = WLCORE_MAX_TXPWR },
 	{ .hw_value = 8, .center_freq = 5040, .max_power = WLCORE_MAX_TXPWR },
-	{ .hw_value = 9, .center_freq = 5045, .max_power = WLCORE_MAX_TXPWR },
-	{ .hw_value = 11, .center_freq = 5055, .max_power = WLCORE_MAX_TXPWR },
 	{ .hw_value = 12, .center_freq = 5060, .max_power = WLCORE_MAX_TXPWR },
 	{ .hw_value = 16, .center_freq = 5080, .max_power = WLCORE_MAX_TXPWR },
 	{ .hw_value = 34, .center_freq = 5170, .max_power = WLCORE_MAX_TXPWR },

From 49540d1b8155b5ded98e6b77c5c92b11854c3de7 Mon Sep 17 00:00:00 2001
From: Eliad Peller <eliad@wizery.com>
Date: Tue, 17 Sep 2013 18:41:27 +0300
Subject: [PATCH 08/11] wlcore: clarify and fix regulatory domain bit
 translation

Channels 52-64 were mapped incorrectly.

Refactor and document wlcore_get_reg_conf_ch_idx() in
order to make it clear what's going on there.

While on it, fix the return value check to consider
0 as a valid return value as well (indicates channel 1).

Reported-by: Yaniv Machani <yanivma@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Ido Reis <idor@ti.com>
Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/cmd.c | 52 +++++++++++++++++-----------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c
index e3ae425381e5..9e5416f8764d 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.c
+++ b/drivers/net/wireless/ti/wlcore/cmd.c
@@ -1607,33 +1607,43 @@ out:
 
 static int wlcore_get_reg_conf_ch_idx(enum ieee80211_band band, u16 ch)
 {
-	int idx = -1;
-
+	/*
+	 * map the given band/channel to the respective predefined
+	 * bit expected by the fw
+	 */
 	switch (band) {
-	case IEEE80211_BAND_5GHZ:
-		if (ch >= 8 && ch <= 16)
-			idx = ((ch-8)/4 + 18);
-		else if (ch >= 34 && ch <= 64)
-			idx = ((ch-34)/2 + 3 + 18);
-		else if (ch >= 100 && ch <= 140)
-			idx = ((ch-100)/4 + 15 + 18);
-		else if (ch >= 149 && ch <= 165)
-			idx = ((ch-149)/4 + 26 + 18);
-		else
-			idx = -1;
-		break;
 	case IEEE80211_BAND_2GHZ:
+		/* channels 1..14 are mapped to 0..13 */
 		if (ch >= 1 && ch <= 14)
-			idx = ch - 1;
-		else
-			idx = -1;
+			return ch - 1;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		switch (ch) {
+		case 8 ... 16:
+			/* channels 8,12,16 are mapped to 18,19,20 */
+			return 18 + (ch-8)/4;
+		case 34 ... 48:
+			/* channels 34,36..48 are mapped to 21..28 */
+			return 21 + (ch-34)/2;
+		case 52 ... 64:
+			/* channels 52,56..64 are mapped to 29..32 */
+			return 29 + (ch-52)/4;
+		case 100 ... 140:
+			/* channels 100,104..140 are mapped to 33..43 */
+			return 33 + (ch-100)/4;
+		case 149 ... 165:
+			/* channels 149,153..165 are mapped to 44..48 */
+			return 44 + (ch-149)/4;
+		default:
+			break;
+		}
 		break;
 	default:
-		wl1271_error("get reg conf ch idx - unknown band: %d",
-			     (int)band);
+		break;
 	}
 
-	return idx;
+	wl1271_error("%s: unknown band/channel: %d/%d", __func__, band, ch);
+	return -1;
 }
 
 void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel,
@@ -1646,7 +1656,7 @@ void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel,
 
 	ch_bit_idx = wlcore_get_reg_conf_ch_idx(band, channel);
 
-	if (ch_bit_idx > 0 && ch_bit_idx <= WL1271_MAX_CHANNELS)
+	if (ch_bit_idx >= 0 && ch_bit_idx <= WL1271_MAX_CHANNELS)
 		set_bit(ch_bit_idx, (long *)wl->reg_ch_conf_pending);
 }
 

From ef47d3287ca693067e3891aad9c8e62671579592 Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Tue, 17 Sep 2013 18:41:28 +0300
Subject: [PATCH 09/11] wl18xx: fix boot process in high temperature
 environment

In addition to existing WCS PLL configuration add and enable
also the coex PLL during init phase. This fixes boot failures
due to silicon latchup in high temperature environment (>85c).

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Nadim Zubidat <nadimz@ti.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 53 +++++++++++++++++++++++++++
 drivers/net/wireless/ti/wl18xx/reg.h  | 13 +++++++
 2 files changed, 66 insertions(+)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 7aa0eb848c5a..b47eb620f2f1 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -623,6 +623,18 @@ static const int wl18xx_rtable[REG_TABLE_LEN] = {
 	[REG_RAW_FW_STATUS_ADDR]	= WL18XX_FW_STATUS_ADDR,
 };
 
+static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = {
+	[CLOCK_CONFIG_16_2_M]	= { 8,  121, 0, 0, false },
+	[CLOCK_CONFIG_16_368_M]	= { 8,  120, 0, 0, false },
+	[CLOCK_CONFIG_16_8_M]	= { 8,  117, 0, 0, false },
+	[CLOCK_CONFIG_19_2_M]	= { 10, 128, 0, 0, false },
+	[CLOCK_CONFIG_26_M]	= { 11, 104, 0, 0, false },
+	[CLOCK_CONFIG_32_736_M]	= { 8,  120, 0, 0, false },
+	[CLOCK_CONFIG_33_6_M]	= { 8,  117, 0, 0, false },
+	[CLOCK_CONFIG_38_468_M]	= { 10, 128, 0, 0, false },
+	[CLOCK_CONFIG_52_M]	= { 11, 104, 0, 0, false },
+};
+
 static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = {
 	[CLOCK_CONFIG_16_2_M]	= { 7,  104,  801, 4,  true },
 	[CLOCK_CONFIG_16_368_M]	= { 9,  132, 3751, 4,  true },
@@ -704,6 +716,23 @@ static int wl18xx_set_clk(struct wl1271 *wl)
 		     wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q,
 		     wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit");
 
+	/* coex PLL configuration */
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N,
+				   wl18xx_clk_table_coex[clk_freq].n);
+	if (ret < 0)
+		goto out;
+
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M,
+				   wl18xx_clk_table_coex[clk_freq].m);
+	if (ret < 0)
+		goto out;
+
+	/* bypass the swallowing logic */
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
+				   PLLSH_COEX_PLL_SWALLOW_EN_VAL1);
+	if (ret < 0)
+		goto out;
+
 	ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N,
 				   wl18xx_clk_table[clk_freq].n);
 	if (ret < 0)
@@ -745,6 +774,30 @@ static int wl18xx_set_clk(struct wl1271 *wl)
 					   PLLSH_WCS_PLL_SWALLOW_EN_VAL2);
 	}
 
+	/* choose WCS PLL */
+	ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL,
+				   PLLSH_WL_PLL_SEL_WCS_PLL);
+	if (ret < 0)
+		goto out;
+
+	/* enable both PLLs */
+	ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1);
+	if (ret < 0)
+		goto out;
+
+	udelay(1000);
+
+	/* disable coex PLL */
+	ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2);
+	if (ret < 0)
+		goto out;
+
+	/* reset the swallowing logic */
+	ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN,
+				   PLLSH_COEX_PLL_SWALLOW_EN_VAL2);
+	if (ret < 0)
+		goto out;
+
 out:
 	return ret;
 }
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index 05dd8bad2746..88de3f2049e3 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -114,6 +114,11 @@
 #define PLATFORM_DETECTION		0xA0E3E0
 #define OCS_EN				0xA02080
 #define PRIMARY_CLK_DETECT		0xA020A6
+#define PLLSH_COEX_PLL_N		0xA02384
+#define PLLSH_COEX_PLL_M		0xA02382
+#define PLLSH_COEX_PLL_SWALLOW_EN	0xA0238E
+#define PLLSH_WL_PLL_SEL		0xA02398
+
 #define PLLSH_WCS_PLL_N			0xA02362
 #define PLLSH_WCS_PLL_M			0xA02360
 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_1	0xA02364
@@ -128,9 +133,17 @@
 #define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK	0xFFFF
 #define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK	0x000F
 
+#define PLLSH_WL_PLL_EN_VAL1		0x7
+#define PLLSH_WL_PLL_EN_VAL2		0x2
+#define PLLSH_COEX_PLL_SWALLOW_EN_VAL1	0x2
+#define PLLSH_COEX_PLL_SWALLOW_EN_VAL2	0x11
+
 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL1	0x1
 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL2	0x12
 
+#define PLLSH_WL_PLL_SEL_WCS_PLL	0x0
+#define PLLSH_WL_PLL_SEL_COEX_PLL	0x1
+
 #define WL18XX_REG_FUSE_DATA_1_3	0xA0260C
 #define WL18XX_PG_VER_MASK		0x70
 #define WL18XX_PG_VER_OFFSET		4

From 1f8a1890ed2be9c1e5cfc243426089d0531f5bde Mon Sep 17 00:00:00 2001
From: Victor Goldenshtein <victorg@ti.com>
Date: Tue, 17 Sep 2013 18:41:29 +0300
Subject: [PATCH 10/11] wl18xx: print new RDL versions during boot

Extract and print info for the new RDL 5, 6, 7 and 8.
Replace const struct with function which translates
the RDL number to string.

Signed-off-by: Victor Goldenshtein <victorg@ti.com>
Signed-off-by: Barak Bercovitz <barak@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wl18xx/main.c | 42 +++++++++++++++++++++++----
 drivers/net/wireless/ti/wl18xx/reg.h  | 20 ++++++-------
 2 files changed, 46 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index b47eb620f2f1..d0daca1d23bc 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -1228,16 +1228,48 @@ static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl,
 	}
 }
 
+static const char *wl18xx_rdl_name(enum wl18xx_rdl_num rdl_num)
+{
+	switch (rdl_num) {
+	case RDL_1_HP:
+		return "183xH";
+	case RDL_2_SP:
+		return "183x or 180x";
+	case RDL_3_HP:
+		return "187xH";
+	case RDL_4_SP:
+		return "187x";
+	case RDL_5_SP:
+		return "RDL11 - Not Supported";
+	case RDL_6_SP:
+		return "180xD";
+	case RDL_7_SP:
+		return "RDL13 - Not Supported (1893Q)";
+	case RDL_8_SP:
+		return "18xxQ";
+	case RDL_NONE:
+		return "UNTRIMMED";
+	default:
+		return "UNKNOWN";
+	}
+}
+
 static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 {
 	u32 fuse;
-	s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0;
+	s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0, package_type = 0;
 	int ret;
 
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]);
 	if (ret < 0)
 		goto out;
 
+	ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse);
+	if (ret < 0)
+		goto out;
+
+	package_type = (fuse >> WL18XX_PACKAGE_TYPE_OFFSET) & 1;
+
 	ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse);
 	if (ret < 0)
 		goto out;
@@ -1245,7 +1277,7 @@ static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 	pg_ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET;
 	rom = (fuse & WL18XX_ROM_VER_MASK) >> WL18XX_ROM_VER_OFFSET;
 
-	if (rom <= 0xE)
+	if ((rom <= 0xE) && (package_type == WL18XX_PACKAGE_TYPE_WSP))
 		metal = (fuse & WL18XX_METAL_VER_MASK) >>
 			WL18XX_METAL_VER_OFFSET;
 	else
@@ -1257,11 +1289,9 @@ static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver)
 		goto out;
 
 	rdl_ver = (fuse & WL18XX_RDL_VER_MASK) >> WL18XX_RDL_VER_OFFSET;
-	if (rdl_ver > RDL_MAX)
-		rdl_ver = RDL_NONE;
 
-	wl1271_info("wl18xx HW: RDL %d, %s, PG %x.%x (ROM %x)",
-		    rdl_ver, rdl_names[rdl_ver], pg_ver, metal, rom);
+	wl1271_info("wl18xx HW: %s, PG %d.%d (ROM 0x%x)",
+		    wl18xx_rdl_name(rdl_ver), pg_ver, metal, rom);
 
 	if (ver)
 		*ver = pg_ver;
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
index 88de3f2049e3..a433a75f3cd7 100644
--- a/drivers/net/wireless/ti/wl18xx/reg.h
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -147,13 +147,16 @@
 #define WL18XX_REG_FUSE_DATA_1_3	0xA0260C
 #define WL18XX_PG_VER_MASK		0x70
 #define WL18XX_PG_VER_OFFSET		4
-#define WL18XX_ROM_VER_MASK		0x3
-#define WL18XX_ROM_VER_OFFSET		0
+#define WL18XX_ROM_VER_MASK		0x3e00
+#define WL18XX_ROM_VER_OFFSET		9
 #define WL18XX_METAL_VER_MASK		0xC
 #define WL18XX_METAL_VER_OFFSET		2
 #define WL18XX_NEW_METAL_VER_MASK	0x180
 #define WL18XX_NEW_METAL_VER_OFFSET	7
 
+#define WL18XX_PACKAGE_TYPE_OFFSET	13
+#define WL18XX_PACKAGE_TYPE_WSP		0
+
 #define WL18XX_REG_FUSE_DATA_2_3	0xA02614
 #define WL18XX_RDL_VER_MASK		0x1f00
 #define WL18XX_RDL_VER_OFFSET		8
@@ -214,24 +217,21 @@ enum {
 	NUM_BOARD_TYPES,
 };
 
-enum {
+enum wl18xx_rdl_num {
 	RDL_NONE	= 0,
 	RDL_1_HP	= 1,
 	RDL_2_SP	= 2,
 	RDL_3_HP	= 3,
 	RDL_4_SP	= 4,
+	RDL_5_SP	= 0x11,
+	RDL_6_SP	= 0x12,
+	RDL_7_SP	= 0x13,
+	RDL_8_SP	= 0x14,
 
 	_RDL_LAST,
 	RDL_MAX = _RDL_LAST - 1,
 };
 
-static const char * const rdl_names[] = {
-	[RDL_NONE]	= "",
-	[RDL_1_HP]	= "1853 SISO",
-	[RDL_2_SP]	= "1857 MIMO",
-	[RDL_3_HP]	= "1893 SISO",
-	[RDL_4_SP]	= "1897 MIMO",
-};
 
 /* FPGA_SPARE_1 register - used to change the PHY ATPG clock at boot time */
 #define WL18XX_PHY_FPGA_SPARE_1		0x8093CA40

From f2cede49ae7b9f51a6fe97ada16c27e4d03d05a3 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Tue, 17 Sep 2013 18:41:30 +0300
Subject: [PATCH 11/11] wlcore: always register dummy hardirq

This keeps the kernel happy when using edge-irqs and requesting a
threaded irq.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
---
 drivers/net/wireless/ti/wlcore/main.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index d8d006fe535e..bbdd10632373 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -5994,6 +5994,11 @@ static const struct wiphy_wowlan_support wlcore_wowlan_support = {
 };
 #endif
 
+static irqreturn_t wlcore_hardirq(int irq, void *cookie)
+{
+	return IRQ_WAKE_THREAD;
+}
+
 static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 {
 	struct wl1271 *wl = context;
@@ -6002,6 +6007,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 	struct wl12xx_platform_data *pdata = pdev_data->pdata;
 	unsigned long irqflags;
 	int ret;
+	irq_handler_t hardirq_fn = NULL;
 
 	if (fw) {
 		wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
@@ -6030,12 +6036,14 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context)
 	wl->platform_quirks = pdata->platform_quirks;
 	wl->if_ops = pdev_data->if_ops;
 
-	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) {
 		irqflags = IRQF_TRIGGER_RISING;
-	else
+		hardirq_fn = wlcore_hardirq;
+	} else {
 		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
+	}
 
-	ret = request_threaded_irq(wl->irq, NULL, wlcore_irq,
+	ret = request_threaded_irq(wl->irq, hardirq_fn, wlcore_irq,
 				   irqflags, pdev->name, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);