OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ARM: dts: Adjust moxart IRQ controller and flags 

The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask
was set in the controller.

With the migration to a standard Faraday driver we need to
set up and handle the consumer flags correctly. Also remove
the Moxart-specific flags when switching to using real consumer
flags.

Extend the register window to 0x100 bytes as we may have a few
more registers in there and it doesn't hurt.

Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Linus Walleij 2017-03-18 17:40:01 +01:00 committed by Olof Johansson
parent 223b9ad701
commit c2a736b698
2 changed files with 10 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/moxart-uc7112lx.dts
View File

@ -6,7 +6,7 @@
*/
/dts-v1/;
/include/ "moxart.dtsi"
#include "moxart.dtsi"
/ {
model = "MOXA UC-7112-LX";

17
arch/arm/boot/dts/moxart.dtsi
View File

@ -6,6 +6,7 @@
*/
/include/ "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "moxa,moxart";
@ -36,8 +37,8 @@
ranges;
intc: interrupt-controller@98800000 {
compatible = "moxa,moxart-ic";
reg = <0x98800000 0x38>;
compatible = "moxa,moxart-ic", "faraday,ftintc010";
reg = <0x98800000 0x100>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-mask = <0x00080000>;
@ -59,7 +60,7 @@
timer: timer@98400000 {
compatible = "moxa,moxart-timer";
reg = <0x98400000 0x42>;
interrupts = <19 1>;
interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
clocks = <&clk_apb>;
};
@ -80,7 +81,7 @@
dma: dma@90500000 {
compatible = "moxa,moxart-dma";
reg = <0x90500080 0x40>;
interrupts = <24 0>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
};
@ -93,7 +94,7 @@
sdhci: sdhci@98e00000 {
compatible = "moxa,moxart-sdhci";
reg = <0x98e00000 0x5C>;
interrupts = <5 0>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_apb>;
dmas = <&dma 5>,
<&dma 5>;
@ -120,7 +121,7 @@
mac0: mac@90900000 {
compatible = "moxa,moxart-mac";
reg = <0x90900000 0x90>;
interrupts = <25 0>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
phy-handle = <&ethphy0>;
phy-mode = "mii";
status = "disabled";
@ -129,7 +130,7 @@
mac1: mac@92000000 {
compatible = "moxa,moxart-mac";
reg = <0x92000000 0x90>;
interrupts = <27 0>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
phy-handle = <&ethphy1>;
phy-mode = "mii";
status = "disabled";
@ -138,7 +139,7 @@
uart0: uart@98200000 {
compatible = "ns16550a";
reg = <0x98200000 0x20>;
interrupts = <31 8>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <14745600>;