Staging: add Support for Quatech ESU2-100 USB 2.0 8-port serial adaptor

The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.

Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Richard Ash 2009-06-23 17:28:06 +01:00 committed by Greg Kroah-Hartman
parent d89505998e
commit c4f3020fc4
5 changed files with 630 additions and 0 deletions

View File

@ -121,6 +121,8 @@ source "drivers/staging/octeon/Kconfig"
source "drivers/staging/serqt_usb2/Kconfig"
source "drivers/staging/quatech_usb2/Kconfig"
source "drivers/staging/vt6655/Kconfig"
source "drivers/staging/vt6656/Kconfig"

View File

@ -41,6 +41,7 @@ obj-$(CONFIG_PLAN9AUTH) += p9auth/
obj-$(CONFIG_HECI) += heci/
obj-$(CONFIG_LINE6_USB) += line6/
obj-$(CONFIG_USB_SERIAL_QUATECH2) += serqt_usb2/
obj-$(CONFIG_USB_SERIAL_QUATECH_USB2) += quatech_usb2/
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/

View File

@ -0,0 +1,15 @@
config USB_SERIAL_QUATECH_USB2
tristate "USB Quatech xSU2-[14]00 USB Serial Driver"
depends on USB_SERIAL
help
Say Y here if you want to use a Quatech USB2.0 to serial adaptor. This
driver supports the SSU2-100, DSU2-100, DSU2-400, QSU2-100, QSU2-400,
ESU2-400 and ESU2-100 USB2.0 to RS232 / 485 / 422 serial adaptors.
Some hardware has an incorrect product string and announces itself as
ESU-100 (which uses the serqt driver) even though it is an ESU2-100.
Check the label on the bottom of your device.
To compile this driver as a module, choose M here: the module will be
called quatech_usb2 .

View File

@ -0,0 +1 @@
obj-$(CONFIG_USB_SERIAL_QUATECH_USB2) += quatech_usb2.o

View File

@ -0,0 +1,611 @@
/*
* Driver for Quatech Inc USB2.0 to serial adaptors. Largely unrelated to the
* serqt_usb driver, based on a re-write of the vendor supplied serqt_usb2 code,
* which is unrelated to the serqt_usb2 in the staging kernel
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
static int debug;
/* Version Information */
#define DRIVER_VERSION "v2.00"
#define DRIVER_AUTHOR "Tim Gobeli, Quatech, Inc"
#define DRIVER_DESC "Quatech USB 2.0 to Serial Driver"
/* vendor and device IDs */
#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */
#define QUATECH_SSU2_100 0xC120 /* RS232 single port */
#define QUATECH_DSU2_100 0xC140 /* RS232 dual port */
#define QUATECH_DSU2_400 0xC150 /* RS232/422/485 dual port */
#define QUATECH_QSU2_100 0xC160 /* RS232 four port */
#define QUATECH_QSU2_400 0xC170 /* RS232/422/485 four port */
#define QUATECH_ESU2_100 0xC1A0 /* RS232 eight port */
#define QUATECH_ESU2_400 0xC180 /* RS232/422/485 eight port */
/* magic numbers go here, when we find out which ones are needed */
#define QU2BOXPWRON 0x8000 /* magic number to turn FPGA power on */
#define QU2BOX232 0x40 /* RS232 mode on MEI devices */
#define QU2BOXSPD9600 0x60 /* set speed to 9600 baud */
/* directions for USB transfers */
#define USBD_TRANSFER_DIRECTION_IN 0xc0
#define USBD_TRANSFER_DIRECTION_OUT 0x40
/* special Quatech command IDs */
#define QT_SET_GET_DEVICE 0xc2
#define QT_OPEN_CLOSE_CHANNEL 0xca
/*#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc
#define QT_SET_ATF 0xcd
#define QT_GET_SET_REGISTER 0xc0*/
#define QT_GET_SET_UART 0xc1
/*#define QT_HW_FLOW_CONTROL_MASK 0xc5
#define QT_SW_FLOW_CONTROL_MASK 0xc6
#define QT_SW_FLOW_CONTROL_DISABLE 0xc7
#define QT_BREAK_CONTROL 0xc8
#define QT_STOP_RECEIVE 0xe0
#define QT_FLUSH_DEVICE 0xc4*/
#define QT_GET_SET_QMCR 0xe1
/* port setting constants */
#define SERIAL_MCR_DTR 0x01
#define SERIAL_MCR_RTS 0x02
#define SERIAL_MCR_LOOP 0x10
#define SERIAL_MSR_CTS 0x10
#define SERIAL_MSR_CD 0x80
#define SERIAL_MSR_RI 0x40
#define SERIAL_MSR_DSR 0x20
#define SERIAL_MSR_MASK 0xf0
#define SERIAL_8_DATA 0x03
#define SERIAL_7_DATA 0x02
#define SERIAL_6_DATA 0x01
#define SERIAL_5_DATA 0x00
#define SERIAL_ODD_PARITY 0X08
#define SERIAL_EVEN_PARITY 0X18
#define SERIAL_TWO_STOPB 0x04
#define SERIAL_ONE_STOPB 0x00
#define MAX_BAUD_RATE 921600
#define MAX_BAUD_REMAINDER 4608
#define SERIAL_LSR_OE 0x02
#define SERIAL_LSR_PE 0x04
#define SERIAL_LSR_FE 0x08
#define SERIAL_LSR_BI 0x10
static struct usb_device_id quausb2_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, quausb2_id_table);
/* custom structures we need go here */
static struct usb_driver quausb2_usb_driver = {
.name = "quatech-usb2-serial",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = quausb2_id_table,
.no_dynamic_id = 1,
};
/* structure in which to keep all the messy stuff that this driver needs
* alongside the usb_serial_port structure */
struct quatech2_port {
int magic;
char active; /* someone has this device open */
unsigned char *xfer_to_tty_buffer;
wait_queue_head_t wait;
int open_count; /* number of times this port has been opened */
struct semaphore sem; /* locks this structure */
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
__u8 shadowMSR; /* last MSR value received */
__u8 shadowLSR; /* last LSR value received */
char open_ports; /* ports open on whole device */
char RxHolding;
char Rcv_Flush;
char Xmit_Flush;
char closePending;
char fifo_empty_flag;
int xmit_pending_bytes;
int xmit_fifo_room_bytes;
struct semaphore pend_xmit_sem; /* locks this structure */
spinlock_t lock;
};
/* structure which holds line and modem status flags */
struct qt2_status_data {
__u8 line_status;
__u8 modem_status;
};
/* Function prototypes */
static int qt2_boxpoweron(struct usb_serial *serial);
static int qt2_boxsetQMCR(struct usb_serial *serial, __u16 Uart_Number,
__u8 QMCR_Value);
static int port_paranoia_check(struct usb_serial_port *port,
const char *function);
static int serial_paranoia_check(struct usb_serial *serial,
const char *function);
static inline struct quatech2_port *qt2_get_port_private(struct usb_serial_port
*port);
static inline void qt2_set_port_private(struct usb_serial_port *port,
struct quatech2_port *data);
static int qt2_openboxchannel(struct usb_serial *serial, __u16
Uart_Number, struct qt2_status_data *pDeviceData);
static int qt2_closeboxchannel(struct usb_serial *serial, __u16
Uart_Number);
static int qt2_conf_uart(struct usb_serial *serial, unsigned short Uart_Number,
unsigned short divisor, unsigned char LCR);
/* implementation functions, roughly in order of use, are here */
static int qt2_calc_num_ports(struct usb_serial *serial)
{
int num_ports;
int flag_as_400;
switch (serial->dev->descriptor.idProduct) {
case QUATECH_SSU2_100:
num_ports = 1;
break;
case QUATECH_DSU2_400:
flag_as_400 = true;
case QUATECH_DSU2_100:
num_ports = 2;
break;
case QUATECH_QSU2_400:
flag_as_400 = true;
case QUATECH_QSU2_100:
num_ports = 4;
break;
case QUATECH_ESU2_400:
flag_as_400 = true;
case QUATECH_ESU2_100:
num_ports = 8;
break;
default:
num_ports = 1;
break;
}
return num_ports;
}
static int qt2_attach(struct usb_serial *serial)
{
struct usb_serial_port *port;
struct quatech2_port *qt2_port;
int i;
/* stuff for printing endpoint addresses, not needed for
* production */
struct usb_endpoint_descriptor *endpoint;
struct usb_host_interface *iface_desc;
/* check how many endpoints there are on the device, for
* sanity's sake */
dbg("%s(): Endpoints: %d bulk in, %d bulk out, %d interrupt in",
__func__, serial->num_bulk_in,
serial->num_bulk_out, serial->num_interrupt_in);
if ((serial->num_bulk_in != 1) || (serial->num_bulk_out != 1)) {
dbg("Device has wrong number of bulk endpoints!");
return -ENODEV;
}
iface_desc = serial->interface->cur_altsetting;
/* print endpoint addresses so we can check them later
* by hand */
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
{
endpoint = &iface_desc->endpoint[i].desc;
if ((endpoint->bEndpointAddress & 0x80) &&
((endpoint->bmAttributes & 3) == 0x02)) {
/* we found a bulk in endpoint */
dbg("found bulk in at 0x%x",
endpoint->bEndpointAddress);
}
if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
((endpoint->bmAttributes & 3) == 0x02))
{
/* we found a bulk out endpoint */
dbg("found bulk out at 0x%x",
endpoint->bEndpointAddress);
}
} /* end printing endpoint addresses */
/* Now setup per port private data, which replaces all the things
* that quatech added to standard kernel structures in their driver */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
qt2_port = kzalloc(sizeof(*qt2_port), GFP_KERNEL);
if (!qt2_port) {
dbg("%s: kmalloc for quatech2_port (%d) failed!.",
__func__, i);
return -ENOMEM;
}
spin_lock_init(&qt2_port->lock);
if (i == 0)
qt2_port->open_ports = 0; /* no ports */
else
qt2_port->open_ports = -1; /* unused */
usb_set_serial_port_data(port, qt2_port);
}
/* switch on power to the hardware */
if (qt2_boxpoweron(serial) < 0) {
dbg("qt2_boxpoweron() failed");
goto startup_error;
}
/* set all ports to RS232 mode */
for (i = 0; i < serial->num_ports; ++i) {
if (qt2_boxsetQMCR(serial, i, QU2BOX232) < 0) {
dbg("qt2_boxsetQMCR() on port %d failed",
i);
goto startup_error;
}
}
return 0;
startup_error:
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
qt2_port = qt2_get_port_private(port);
kfree(qt2_port);
usb_set_serial_port_data(port, NULL);
}
dbg("Exit fail %s\n", __func__);
return -EIO;
}
static void qt2_release(struct usb_serial *serial)
{
struct usb_serial_port *port;
struct quatech2_port *qt_port;
int i;
dbg("enterting %s", __func__);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
if (!port)
continue;
qt_port = usb_get_serial_port_data(port);
kfree(qt_port);
usb_set_serial_port_data(port, NULL);
}
}
/* This function is called once per serial port on the device.
* The tty_struct and the usb_serial_port belong to this port,
* i.e. there are multiple ones for a multi-port device.
* However the usb_serial_port structure has a back-pointer
* to the parent usb_serial structure which belongs to the device,
* so we can access either the device-wide information or
* any other port's information (because there are also forward
* pointers) via that pointer.
* This is most helpful if the device shares resources (e.g. end
* points) between different ports
*/
int qt2_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial; /* device structure */
struct usb_serial_port *port0; /* first port structure on device */
struct quatech2_port *port_extra; /* extra data for this port */
struct quatech2_port *port0_extra; /* extra data for first port */
struct qt2_status_data ChannelData;
unsigned short default_divisor = QU2BOXSPD9600;
unsigned char default_LCR = SERIAL_8_DATA;
int status;
if (port_paranoia_check(port, __func__))
return -ENODEV;
dbg("%s - port %d\n", __func__, port->number);
serial = port->serial; /* get the parent device structure */
if (serial_paranoia_check(serial, __func__))
return -ENODEV;
port0 = serial->port[0]; /* get the first port's device structure */
port_extra = qt2_get_port_private(port);
port0_extra = qt2_get_port_private(port0);
if (port_extra == NULL || port0_extra == NULL)
return -ENODEV;
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
port0_extra->open_ports++;
/* FIXME: are these needed? Does it even do anything useful? */
/* get the modem and line status values from the UART */
status = qt2_openboxchannel(serial, port->number,
&ChannelData);
if (status < 0) {
dbg("qt2_openboxchannel on channel %d failed",
port->number);
return status;
}
port_extra->shadowLSR = ChannelData.line_status &
(SERIAL_LSR_OE | SERIAL_LSR_PE | SERIAL_LSR_FE |
SERIAL_LSR_BI);
port_extra->shadowMSR = ChannelData.modem_status &
(SERIAL_MSR_CTS | SERIAL_MSR_DSR | SERIAL_MSR_RI |
SERIAL_MSR_CD);
port_extra->fifo_empty_flag = true;
dbg("qt2_openboxchannel on channel %d completed.",
port->number);
/* Set Baud rate to default and turn off flow control here */
status = qt2_conf_uart(serial, port->number, default_divisor,
default_LCR);
if (status < 0) {
dbg("qt2_conf_uart() failed on channel %d",
port->number);
return status;
}
dbg("qt2_conf_uart() completed on channel %d",
port->number);
dbg("port number is %d", port->number);
dbg("serial number is %d", port->serial->minor);
/* We need to set up endpoints here. We only
* have one pair of endpoints per device, so in fact
* we only need to set up endpoints on the first time
* round, not subsequent ones.
* When we do a write to a port, we will use the same endpoint
* regardless of the port, with a 5-byte header added on to
* tell the box which port it should eventually come out of,
* so the same endpoint information needs to be visible to
* write calls regardless of which port is being written.
* To this end we actually keep the relevant endpoints
* in port 0's structure, because that's always there
* and avoids providing our own duplicate members in some
* user data structure for the same purpose.
* URBs will be allocated and freed dynamically as the are
* used, so are not touched here.
*/
if (port0_extra->open_ports == 1) {
/* this is first port to be opened */
}
dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress);
/* initialize our wait queues */
init_waitqueue_head(&port_extra->wait);
/* remember to store port_extra and port0 back again at end !*/
qt2_set_port_private(port, port_extra);
qt2_set_port_private(serial->port[0], port0_extra);
return 0;
}
/* internal, private helper functions for the driver */
/* Power up the FPGA in the box to get it working */
static int qt2_boxpoweron(struct usb_serial *serial)
{
int result;
__u8 Direcion;
unsigned int pipe;
Direcion = USBD_TRANSFER_DIRECTION_OUT;
pipe = usb_rcvctrlpipe(serial->dev, 0);
result = usb_control_msg(serial->dev, pipe, QT_SET_GET_DEVICE,
Direcion, QU2BOXPWRON, 0x00, NULL, 0x00,
5000);
return result;
}
/*
* qt2_boxsetQMCR Issue a QT_GET_SET_QMCR vendor-spcific request on the
* default control pipe. If successful return the number of bytes written,
* otherwise return a negative error number of the problem.
*/
static int qt2_boxsetQMCR(struct usb_serial *serial, __u16 Uart_Number,
__u8 QMCR_Value)
{
int result;
__u16 PortSettings;
PortSettings = (__u16)(QMCR_Value);
dbg("%s(): Port = %d, PortSettings = 0x%x", __func__,
Uart_Number, PortSettings);
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT_GET_SET_QMCR, 0x40, PortSettings,
(__u16)Uart_Number, NULL, 0, 5000);
return result;
}
static int port_paranoia_check(struct usb_serial_port *port,
const char *function)
{
if (!port) {
dbg("%s - port == NULL", function);
return -1;
}
if (!port->serial) {
dbg("%s - port->serial == NULL\n", function);
return -1;
}
return 0;
}
static int serial_paranoia_check(struct usb_serial *serial,
const char *function)
{
if (!serial) {
dbg("%s - serial == NULL\n", function);
return -1;
}
if (!serial->type) {
dbg("%s - serial->type == NULL!", function);
return -1;
}
return 0;
}
static inline struct quatech2_port *qt2_get_port_private(struct usb_serial_port
*port)
{
return (struct quatech2_port *)usb_get_serial_port_data(port);
}
static inline void qt2_set_port_private(struct usb_serial_port *port,
struct quatech2_port *data)
{
usb_set_serial_port_data(port, (void *)data);
}
static int qt2_openboxchannel(struct usb_serial *serial, __u16
Uart_Number, struct qt2_status_data *status)
{
int result;
__u16 length;
__u8 Direcion;
unsigned int pipe;
length = sizeof(struct qt2_status_data);
Direcion = USBD_TRANSFER_DIRECTION_IN;
pipe = usb_rcvctrlpipe(serial->dev, 0);
result = usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
Direcion, 0x00, Uart_Number, status, length, 5000);
return result;
}
static int qt2_closeboxchannel(struct usb_serial *serial, __u16 Uart_Number)
{
int result;
__u8 direcion;
unsigned int pipe;
direcion = USBD_TRANSFER_DIRECTION_OUT;
pipe = usb_sndctrlpipe(serial->dev, 0);
result = usb_control_msg(serial->dev, pipe, QT_OPEN_CLOSE_CHANNEL,
direcion, 0, Uart_Number, NULL, 0, 5000);
return result;
}
/* qt2_conf_uart Issue a SET_UART vendor-spcific request on the default
* control pipe. If successful sets baud rate divisor and LCR value
*/
static int qt2_conf_uart(struct usb_serial *serial, unsigned short Uart_Number,
unsigned short divisor, unsigned char LCR)
{
int result;
unsigned short UartNumandLCR;
UartNumandLCR = (LCR << 8) + Uart_Number;
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
QT_GET_SET_UART, 0x40, divisor, UartNumandLCR,
NULL, 0, 300);
return result;
}
/*
* last things in file: stuff to register this driver into the generic
* USB serial framework.
*/
static struct usb_serial_driver quatech2_device = {
.driver = {
.owner = THIS_MODULE,
.name = "quatech_usb2",
},
.description = DRIVER_DESC,
.usb_driver = &quausb2_usb_driver,
.id_table = quausb2_id_table,
.num_ports = 8,
.open = qt2_open,
/*.close = qt_close,
.write = qt_write,
.write_room = qt_write_room,
.chars_in_buffer = qt_chars_in_buffer,
.throttle = qt_throttle,
.unthrottle = qt_unthrottle,*/
.calc_num_ports = qt2_calc_num_ports,
/*.ioctl = qt_ioctl,
.set_termios = qt_set_termios,
.break_ctl = qt_break,
.tiocmget = qt_tiocmget,
.tiocmset = qt_tiocmset,*/
.attach = qt2_attach,
.release = qt2_release,
};
static int __init quausb2_usb_init(void)
{
int retval;
dbg("%s\n", __func__);
/* register with usb-serial */
retval = usb_serial_register(&quatech2_device);
if (retval)
goto failed_usb_serial_register;
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
DRIVER_DESC "\n");
/* register with usb */
retval = usb_register(&quausb2_usb_driver);
if (retval == 0)
return 0;
/* if we're here, usb_register() failed */
usb_serial_deregister(&quatech2_device);
failed_usb_serial_register:
return retval;
}
static void __exit quausb2_usb_exit(void)
{
usb_deregister(&quausb2_usb_driver);
usb_serial_deregister(&quatech2_device);
}
module_init(quausb2_usb_init);
module_exit(quausb2_usb_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");