diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 364c19357e60..89106792d067 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -26,15 +26,6 @@ #include "clock.h" #include "sam9_smc.h" -static struct map_desc at91rm9200_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_EMAC, - .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -315,7 +306,6 @@ static void __init at91rm9200_map_io(void) { /* Map peripherals */ at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); - iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } static void __init at91rm9200_ioremap_registers(void) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 05774e5b1cba..60c472861e5e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -140,8 +140,8 @@ static struct macb_platform_data eth_data; static struct resource eth_resources[] = { [0] = { - .start = AT91_VA_BASE_EMAC, - .end = AT91_VA_BASE_EMAC + SZ_16K - 1, + .start = AT91RM9200_BASE_EMAC, + .end = AT91RM9200_BASE_EMAC + SZ_16K - 1, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index e9e29a6c3868..01db372be8e5 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -94,7 +94,6 @@ * Virtual to Physical Address mapping for IO devices. */ #define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS) -#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC) /* Internal SRAM is mapped below the IO devices */ #define AT91_SRAM_MAX SZ_1M diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 906117016fc4..62761e19e210 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -51,21 +52,17 @@ /* * Read from a EMAC register. */ -static inline unsigned long at91_emac_read(unsigned int reg) +static inline unsigned long at91_emac_read(struct at91_private *lp, unsigned int reg) { - void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC; - - return __raw_readl(emac_base + reg); + return __raw_readl(lp->emac_base + reg); } /* * Write to a EMAC register. */ -static inline void at91_emac_write(unsigned int reg, unsigned long value) +static inline void at91_emac_write(struct at91_private *lp, unsigned int reg, unsigned long value) { - void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC; - - __raw_writel(value, emac_base + reg); + __raw_writel(value, lp->emac_base + reg); } /* ........................... PHY INTERFACE ........................... */ @@ -75,32 +72,33 @@ static inline void at91_emac_write(unsigned int reg, unsigned long value) * When not called from an interrupt-handler, access to the PHY must be * protected by a spinlock. */ -static void enable_mdi(void) +static void enable_mdi(struct at91_private *lp) { unsigned long ctl; - ctl = at91_emac_read(AT91_EMAC_CTL); - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */ + ctl = at91_emac_read(lp, AT91_EMAC_CTL); + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */ } /* * Disable the MDIO bit in the MAC control register */ -static void disable_mdi(void) +static void disable_mdi(struct at91_private *lp) { unsigned long ctl; - ctl = at91_emac_read(AT91_EMAC_CTL); - at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */ + ctl = at91_emac_read(lp, AT91_EMAC_CTL); + at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */ } /* * Wait until the PHY operation is complete. */ -static inline void at91_phy_wait(void) { +static inline void at91_phy_wait(struct at91_private *lp) +{ unsigned long timeout = jiffies + 2; - while (!(at91_emac_read(AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) { + while (!(at91_emac_read(lp, AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) { if (time_after(jiffies, timeout)) { printk("at91_ether: MIO timeout\n"); break; @@ -113,28 +111,28 @@ static inline void at91_phy_wait(void) { * Write value to the a PHY register * Note: MDI interface is assumed to already have been enabled. */ -static void write_phy(unsigned char phy_addr, unsigned char address, unsigned int value) +static void write_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int value) { - at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W + at91_emac_write(lp, AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W | ((phy_addr & 0x1f) << 23) | (address << 18) | (value & AT91_EMAC_DATA)); /* Wait until IDLE bit in Network Status register is cleared */ - at91_phy_wait(); + at91_phy_wait(lp); } /* * Read value stored in a PHY register. * Note: MDI interface is assumed to already have been enabled. */ -static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int *value) +static void read_phy(struct at91_private *lp, unsigned char phy_addr, unsigned char address, unsigned int *value) { - at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R + at91_emac_write(lp, AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R | ((phy_addr & 0x1f) << 23) | (address << 18)); /* Wait until IDLE bit in Network Status register is cleared */ - at91_phy_wait(); + at91_phy_wait(lp); - *value = at91_emac_read(AT91_EMAC_MAN) & AT91_EMAC_DATA; + *value = at91_emac_read(lp, AT91_EMAC_MAN) & AT91_EMAC_DATA; } /* ........................... PHY MANAGEMENT .......................... */ @@ -158,13 +156,13 @@ static void update_linkspeed(struct net_device *dev, int silent) } /* Link up, or auto-negotiation still in progress */ - read_phy(lp->phy_address, MII_BMSR, &bmsr); - read_phy(lp->phy_address, MII_BMCR, &bmcr); + read_phy(lp, lp->phy_address, MII_BMSR, &bmsr); + read_phy(lp, lp->phy_address, MII_BMCR, &bmcr); if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */ if (!(bmsr & BMSR_ANEGCOMPLETE)) return; /* Do nothing - another interrupt generated when negotiation complete */ - read_phy(lp->phy_address, MII_LPA, &lpa); + read_phy(lp, lp->phy_address, MII_LPA, &lpa); if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100; else speed = SPEED_10; if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL; @@ -175,7 +173,7 @@ static void update_linkspeed(struct net_device *dev, int silent) } /* Update the MAC */ - mac_cfg = at91_emac_read(AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD); + mac_cfg = at91_emac_read(lp, AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD); if (speed == SPEED_100) { if (duplex == DUPLEX_FULL) /* 100 Full Duplex */ mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD; @@ -186,7 +184,7 @@ static void update_linkspeed(struct net_device *dev, int silent) mac_cfg |= AT91_EMAC_FD; else {} /* 10 Half Duplex */ } - at91_emac_write(AT91_EMAC_CFG, mac_cfg); + at91_emac_write(lp, AT91_EMAC_CFG, mac_cfg); if (!silent) printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex"); @@ -207,34 +205,34 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id) * level-triggering. We therefore have to check if the PHY actually has * an IRQ pending. */ - enable_mdi(); + enable_mdi(lp); if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { - read_phy(lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */ + read_phy(lp, lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */ if (!(phy & (1 << 0))) goto done; } else if (lp->phy_type == MII_LXT971A_ID) { - read_phy(lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */ + read_phy(lp, lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */ if (!(phy & (1 << 2))) goto done; } else if (lp->phy_type == MII_BCM5221_ID) { - read_phy(lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */ + read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */ if (!(phy & (1 << 0))) goto done; } else if (lp->phy_type == MII_KS8721_ID) { - read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */ + read_phy(lp, lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */ if (!(phy & ((1 << 2) | 1))) goto done; } - else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */ - read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy); + else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */ + read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &phy); if (!(phy & ((1 << 2) | 1))) goto done; } else if (lp->phy_type == MII_DP83848_ID) { - read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */ + read_phy(lp, lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */ if (!(phy & (1 << 7))) goto done; } @@ -242,7 +240,7 @@ static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id) update_linkspeed(dev, 0); done: - disable_mdi(); + disable_mdi(lp); return IRQ_HANDLED; } @@ -273,41 +271,41 @@ static void enable_phyirq(struct net_device *dev) } spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */ - read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr); dsintr = dsintr & ~0xf00; /* clear bits 8..11 */ - write_phy(lp->phy_address, MII_DSINTR_REG, dsintr); + write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr); } else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */ - read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr); dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */ - write_phy(lp->phy_address, MII_ISINTE_REG, dsintr); + write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr); } else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */ dsintr = (1 << 15) | ( 1 << 14); - write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); + write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr); } else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */ dsintr = (1 << 10) | ( 1 << 8); - write_phy(lp->phy_address, MII_TPISTATUS, dsintr); + write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr); } else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ - read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr); dsintr = dsintr | 0x500; /* set bits 8, 10 */ - write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr); + write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr); } else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ - read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr); dsintr = dsintr | 0x3c; /* set bits 2..5 */ - write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); - read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr); + write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr); + read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr); dsintr = dsintr | 0x3; /* set bits 0,1 */ - write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); + write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr); } - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); } @@ -326,43 +324,43 @@ static void disable_phyirq(struct net_device *dev) } spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */ - read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_DSINTR_REG, &dsintr); dsintr = dsintr | 0xf00; /* set bits 8..11 */ - write_phy(lp->phy_address, MII_DSINTR_REG, dsintr); + write_phy(lp, lp->phy_address, MII_DSINTR_REG, dsintr); } else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */ - read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_ISINTE_REG, &dsintr); dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */ - write_phy(lp->phy_address, MII_ISINTE_REG, dsintr); + write_phy(lp, lp->phy_address, MII_ISINTE_REG, dsintr); } else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */ - read_phy(lp->phy_address, MII_BCMINTR_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_BCMINTR_REG, &dsintr); dsintr = ~(1 << 14); - write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); + write_phy(lp, lp->phy_address, MII_BCMINTR_REG, dsintr); } else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */ - read_phy(lp->phy_address, MII_TPISTATUS, &dsintr); + read_phy(lp, lp->phy_address, MII_TPISTATUS, &dsintr); dsintr = ~((1 << 10) | (1 << 8)); - write_phy(lp->phy_address, MII_TPISTATUS, dsintr); + write_phy(lp, lp->phy_address, MII_TPISTATUS, dsintr); } else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */ - read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_T78Q21INT_REG, &dsintr); dsintr = dsintr & ~0x500; /* clear bits 8, 10 */ - write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr); + write_phy(lp, lp->phy_address, MII_T78Q21INT_REG, dsintr); } else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */ - read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr); + read_phy(lp, lp->phy_address, MII_DPMICR_REG, &dsintr); dsintr = dsintr & ~0x3; /* clear bits 0, 1 */ - write_phy(lp->phy_address, MII_DPMICR_REG, dsintr); - read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr); + write_phy(lp, lp->phy_address, MII_DPMICR_REG, dsintr); + read_phy(lp, lp->phy_address, MII_DPMISR_REG, &dsintr); dsintr = dsintr & ~0x3c; /* clear bits 2..5 */ - write_phy(lp->phy_address, MII_DPMISR_REG, dsintr); + write_phy(lp, lp->phy_address, MII_DPMISR_REG, dsintr); } - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); irq_number = lp->board_data.phy_irq_pin; @@ -379,17 +377,17 @@ static void reset_phy(struct net_device *dev) unsigned int bmcr; spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); /* Perform PHY reset */ - write_phy(lp->phy_address, MII_BMCR, BMCR_RESET); + write_phy(lp, lp->phy_address, MII_BMCR, BMCR_RESET); /* Wait until PHY reset is complete */ do { - read_phy(lp->phy_address, MII_BMCR, &bmcr); + read_phy(lp, lp->phy_address, MII_BMCR, &bmcr); } while (!(bmcr & BMCR_RESET)); - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); } #endif @@ -399,13 +397,37 @@ static void at91ether_check_link(unsigned long dev_id) struct net_device *dev = (struct net_device *) dev_id; struct at91_private *lp = netdev_priv(dev); - enable_mdi(); + enable_mdi(lp); update_linkspeed(dev, 1); - disable_mdi(); + disable_mdi(lp); mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL); } +/* + * Perform any PHY-specific initialization. + */ +static void __init initialize_phy(struct at91_private *lp) +{ + unsigned int val; + + spin_lock_irq(&lp->lock); + enable_mdi(lp); + + if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { + read_phy(lp, lp->phy_address, MII_DSCR_REG, &val); + if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */ + lp->phy_media = PORT_FIBRE; + } else if (machine_is_csb337()) { + /* mix link activity status into LED2 link state */ + write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x0d22); + } else if (machine_is_ecbat91()) + write_phy(lp, lp->phy_address, MII_LEDCTRL_REG, 0x156A); + + disable_mdi(lp); + spin_unlock_irq(&lp->lock); +} + /* ......................... ADDRESS MANAGEMENT ........................ */ /* @@ -454,17 +476,19 @@ static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, */ static void __init get_mac_address(struct net_device *dev) { + struct at91_private *lp = netdev_priv(dev); + /* Check Specific-Address 1 */ - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA1H), at91_emac_read(AT91_EMAC_SA1L))) + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA1H), at91_emac_read(lp, AT91_EMAC_SA1L))) return; /* Check Specific-Address 2 */ - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA2H), at91_emac_read(AT91_EMAC_SA2L))) + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA2H), at91_emac_read(lp, AT91_EMAC_SA2L))) return; /* Check Specific-Address 3 */ - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA3H), at91_emac_read(AT91_EMAC_SA3L))) + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA3H), at91_emac_read(lp, AT91_EMAC_SA3L))) return; /* Check Specific-Address 4 */ - if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA4H), at91_emac_read(AT91_EMAC_SA4L))) + if (unpack_mac_address(dev, at91_emac_read(lp, AT91_EMAC_SA4H), at91_emac_read(lp, AT91_EMAC_SA4L))) return; printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n"); @@ -475,11 +499,13 @@ static void __init get_mac_address(struct net_device *dev) */ static void update_mac_address(struct net_device *dev) { - at91_emac_write(AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0])); - at91_emac_write(AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4])); + struct at91_private *lp = netdev_priv(dev); - at91_emac_write(AT91_EMAC_SA2L, 0); - at91_emac_write(AT91_EMAC_SA2H, 0); + at91_emac_write(lp, AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0])); + at91_emac_write(lp, AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4])); + + at91_emac_write(lp, AT91_EMAC_SA2L, 0); + at91_emac_write(lp, AT91_EMAC_SA2H, 0); } /* @@ -559,6 +585,7 @@ static int hash_get_index(__u8 *addr) */ static void at91ether_sethashtable(struct net_device *dev) { + struct at91_private *lp = netdev_priv(dev); struct netdev_hw_addr *ha; unsigned long mc_filter[2]; unsigned int bitnr; @@ -570,8 +597,8 @@ static void at91ether_sethashtable(struct net_device *dev) mc_filter[bitnr >> 5] |= 1 << (bitnr & 31); } - at91_emac_write(AT91_EMAC_HSL, mc_filter[0]); - at91_emac_write(AT91_EMAC_HSH, mc_filter[1]); + at91_emac_write(lp, AT91_EMAC_HSL, mc_filter[0]); + at91_emac_write(lp, AT91_EMAC_HSH, mc_filter[1]); } /* @@ -579,9 +606,10 @@ static void at91ether_sethashtable(struct net_device *dev) */ static void at91ether_set_multicast_list(struct net_device *dev) { + struct at91_private *lp = netdev_priv(dev); unsigned long cfg; - cfg = at91_emac_read(AT91_EMAC_CFG); + cfg = at91_emac_read(lp, AT91_EMAC_CFG); if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */ cfg |= AT91_EMAC_CAF; @@ -589,34 +617,37 @@ static void at91ether_set_multicast_list(struct net_device *dev) cfg &= ~AT91_EMAC_CAF; if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */ - at91_emac_write(AT91_EMAC_HSH, -1); - at91_emac_write(AT91_EMAC_HSL, -1); + at91_emac_write(lp, AT91_EMAC_HSH, -1); + at91_emac_write(lp, AT91_EMAC_HSL, -1); cfg |= AT91_EMAC_MTI; } else if (!netdev_mc_empty(dev)) { /* Enable specific multicasts */ at91ether_sethashtable(dev); cfg |= AT91_EMAC_MTI; } else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */ - at91_emac_write(AT91_EMAC_HSH, 0); - at91_emac_write(AT91_EMAC_HSL, 0); + at91_emac_write(lp, AT91_EMAC_HSH, 0); + at91_emac_write(lp, AT91_EMAC_HSL, 0); cfg &= ~AT91_EMAC_MTI; } - at91_emac_write(AT91_EMAC_CFG, cfg); + at91_emac_write(lp, AT91_EMAC_CFG, cfg); } /* ......................... ETHTOOL SUPPORT ........................... */ static int mdio_read(struct net_device *dev, int phy_id, int location) { + struct at91_private *lp = netdev_priv(dev); unsigned int value; - read_phy(phy_id, location, &value); + read_phy(lp, phy_id, location, &value); return value; } static void mdio_write(struct net_device *dev, int phy_id, int location, int value) { - write_phy(phy_id, location, value); + struct at91_private *lp = netdev_priv(dev); + + write_phy(lp, phy_id, location, value); } static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) @@ -625,11 +656,11 @@ static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cm int ret; spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); ret = mii_ethtool_gset(&lp->mii, cmd); - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */ @@ -646,11 +677,11 @@ static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cm int ret; spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); ret = mii_ethtool_sset(&lp->mii, cmd); - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); return ret; @@ -662,11 +693,11 @@ static int at91ether_nwayreset(struct net_device *dev) int ret; spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); ret = mii_nway_restart(&lp->mii); - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); return ret; @@ -696,9 +727,9 @@ static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return -EINVAL; spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL); - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); return res; @@ -731,11 +762,11 @@ static void at91ether_start(struct net_device *dev) lp->rxBuffIndex = 0; /* Program address of descriptor list in Rx Buffer Queue register */ - at91_emac_write(AT91_EMAC_RBQP, (unsigned long) dlist_phys); + at91_emac_write(lp, AT91_EMAC_RBQP, (unsigned long) dlist_phys); /* Enable Receive and Transmit */ - ctl = at91_emac_read(AT91_EMAC_CTL); - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE); + ctl = at91_emac_read(lp, AT91_EMAC_CTL); + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE); } /* @@ -752,8 +783,8 @@ static int at91ether_open(struct net_device *dev) clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */ /* Clear internal statistics */ - ctl = at91_emac_read(AT91_EMAC_CTL); - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_CSR); + ctl = at91_emac_read(lp, AT91_EMAC_CTL); + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_CSR); /* Update the MAC address (incase user has changed it) */ update_mac_address(dev); @@ -762,15 +793,15 @@ static int at91ether_open(struct net_device *dev) enable_phyirq(dev); /* Enable MAC interrupts */ - at91_emac_write(AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA + at91_emac_write(lp, AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM | AT91_EMAC_ROVR | AT91_EMAC_ABT); /* Determine current link speed */ spin_lock_irq(&lp->lock); - enable_mdi(); + enable_mdi(lp); update_linkspeed(dev, 0); - disable_mdi(); + disable_mdi(lp); spin_unlock_irq(&lp->lock); at91ether_start(dev); @@ -787,14 +818,14 @@ static int at91ether_close(struct net_device *dev) unsigned long ctl; /* Disable Receiver and Transmitter */ - ctl = at91_emac_read(AT91_EMAC_CTL); - at91_emac_write(AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE)); + ctl = at91_emac_read(lp, AT91_EMAC_CTL); + at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE)); /* Disable PHY interrupt */ disable_phyirq(dev); /* Disable MAC interrupts */ - at91_emac_write(AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA + at91_emac_write(lp, AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA | AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM | AT91_EMAC_ROVR | AT91_EMAC_ABT); @@ -812,7 +843,7 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct at91_private *lp = netdev_priv(dev); - if (at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) { + if (at91_emac_read(lp, AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) { netif_stop_queue(dev); /* Store packet information (to free when Tx completed) */ @@ -822,9 +853,9 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->stats.tx_bytes += skb->len; /* Set address of the data in the Transmit Address register */ - at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr); + at91_emac_write(lp, AT91_EMAC_TAR, lp->skb_physaddr); /* Set length of the packet in the Transmit Control register */ - at91_emac_write(AT91_EMAC_TCR, skb->len); + at91_emac_write(lp, AT91_EMAC_TCR, skb->len); } else { printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n"); @@ -841,31 +872,32 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev) */ static struct net_device_stats *at91ether_stats(struct net_device *dev) { + struct at91_private *lp = netdev_priv(dev); int ale, lenerr, seqe, lcol, ecol; if (netif_running(dev)) { - dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */ - ale = at91_emac_read(AT91_EMAC_ALE); + dev->stats.rx_packets += at91_emac_read(lp, AT91_EMAC_OK); /* Good frames received */ + ale = at91_emac_read(lp, AT91_EMAC_ALE); dev->stats.rx_frame_errors += ale; /* Alignment errors */ - lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF); + lenerr = at91_emac_read(lp, AT91_EMAC_ELR) + at91_emac_read(lp, AT91_EMAC_USF); dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */ - seqe = at91_emac_read(AT91_EMAC_SEQE); + seqe = at91_emac_read(lp, AT91_EMAC_SEQE); dev->stats.rx_crc_errors += seqe; /* CRC error */ - dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */ + dev->stats.rx_fifo_errors += at91_emac_read(lp, AT91_EMAC_DRFC);/* Receive buffer not available */ dev->stats.rx_errors += (ale + lenerr + seqe - + at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB)); + + at91_emac_read(lp, AT91_EMAC_CDE) + at91_emac_read(lp, AT91_EMAC_RJB)); - dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */ - dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */ - dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */ - dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */ + dev->stats.tx_packets += at91_emac_read(lp, AT91_EMAC_FRA); /* Frames successfully transmitted */ + dev->stats.tx_fifo_errors += at91_emac_read(lp, AT91_EMAC_TUE); /* Transmit FIFO underruns */ + dev->stats.tx_carrier_errors += at91_emac_read(lp, AT91_EMAC_CSE); /* Carrier Sense errors */ + dev->stats.tx_heartbeat_errors += at91_emac_read(lp, AT91_EMAC_SQEE);/* Heartbeat error */ - lcol = at91_emac_read(AT91_EMAC_LCOL); - ecol = at91_emac_read(AT91_EMAC_ECOL); + lcol = at91_emac_read(lp, AT91_EMAC_LCOL); + ecol = at91_emac_read(lp, AT91_EMAC_ECOL); dev->stats.tx_window_errors += lcol; /* Late collisions */ dev->stats.tx_aborted_errors += ecol; /* 16 collisions */ - dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol); + dev->stats.collisions += (at91_emac_read(lp, AT91_EMAC_SCOL) + at91_emac_read(lp, AT91_EMAC_MCOL) + lcol + ecol); } return &dev->stats; } @@ -922,7 +954,7 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id) /* MAC Interrupt Status register indicates what interrupts are pending. It is automatically cleared once read. */ - intstatus = at91_emac_read(AT91_EMAC_ISR); + intstatus = at91_emac_read(lp, AT91_EMAC_ISR); if (intstatus & AT91_EMAC_RCOM) /* Receive complete */ at91ether_rx(dev); @@ -942,9 +974,9 @@ static irqreturn_t at91ether_interrupt(int irq, void *dev_id) /* Work-around for Errata #11 */ if (intstatus & AT91_EMAC_RBNA) { - ctl = at91_emac_read(AT91_EMAC_CTL); - at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE); - at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE); + ctl = at91_emac_read(lp, AT91_EMAC_CTL); + at91_emac_write(lp, AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE); + at91_emac_write(lp, AT91_EMAC_CTL, ctl | AT91_EMAC_RE); } if (intstatus & AT91_EMAC_ROVR) @@ -980,165 +1012,20 @@ static const struct net_device_ops at91ether_netdev_ops = { }; /* - * Initialize the ethernet interface + * Detect the PHY type, and its address. */ -static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address, - struct platform_device *pdev, struct clk *ether_clk) -{ - struct macb_platform_data *board_data = pdev->dev.platform_data; - struct net_device *dev; - struct at91_private *lp; - unsigned int val; - int res; - - dev = alloc_etherdev(sizeof(struct at91_private)); - if (!dev) - return -ENOMEM; - - dev->base_addr = AT91_VA_BASE_EMAC; - dev->irq = AT91RM9200_ID_EMAC; - - /* Install the interrupt handler */ - if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) { - free_netdev(dev); - return -EBUSY; - } - - /* Allocate memory for DMA Receive descriptors */ - lp = netdev_priv(dev); - lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL); - if (lp->dlist == NULL) { - free_irq(dev->irq, dev); - free_netdev(dev); - return -ENOMEM; - } - lp->board_data = *board_data; - lp->ether_clk = ether_clk; - platform_set_drvdata(pdev, dev); - - spin_lock_init(&lp->lock); - - ether_setup(dev); - dev->netdev_ops = &at91ether_netdev_ops; - dev->ethtool_ops = &at91ether_ethtool_ops; - - SET_NETDEV_DEV(dev, &pdev->dev); - - get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */ - update_mac_address(dev); /* Program ethernet address into MAC */ - - at91_emac_write(AT91_EMAC_CTL, 0); - - if (lp->board_data.is_rmii) - at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII); - else - at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG); - - /* Perform PHY-specific initialization */ - spin_lock_irq(&lp->lock); - enable_mdi(); - if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { - read_phy(phy_address, MII_DSCR_REG, &val); - if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */ - lp->phy_media = PORT_FIBRE; - } else if (machine_is_csb337()) { - /* mix link activity status into LED2 link state */ - write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22); - } else if (machine_is_ecbat91()) - write_phy(phy_address, MII_LEDCTRL_REG, 0x156A); - - disable_mdi(); - spin_unlock_irq(&lp->lock); - - lp->mii.dev = dev; /* Support for ethtool */ - lp->mii.mdio_read = mdio_read; - lp->mii.mdio_write = mdio_write; - lp->mii.phy_id = phy_address; - lp->mii.phy_id_mask = 0x1f; - lp->mii.reg_num_mask = 0x1f; - - lp->phy_type = phy_type; /* Type of PHY connected */ - lp->phy_address = phy_address; /* MDI address of PHY */ - - /* Register the network interface */ - res = register_netdev(dev); - if (res) { - free_irq(dev->irq, dev); - free_netdev(dev); - dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); - return res; - } - - /* Determine current link speed */ - spin_lock_irq(&lp->lock); - enable_mdi(); - update_linkspeed(dev, 0); - disable_mdi(); - spin_unlock_irq(&lp->lock); - netif_carrier_off(dev); /* will be enabled in open() */ - - /* If board has no PHY IRQ, use a timer to poll the PHY */ - if (!gpio_is_valid(lp->board_data.phy_irq_pin)) { - init_timer(&lp->check_timer); - lp->check_timer.data = (unsigned long)dev; - lp->check_timer.function = at91ether_check_link; - } else if (lp->board_data.phy_irq_pin >= 32) - gpio_request(lp->board_data.phy_irq_pin, "ethernet_phy"); - - /* Display ethernet banner */ - printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n", - dev->name, (uint) dev->base_addr, dev->irq, - at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-", - at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex", - dev->dev_addr); - if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) - printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)"); - else if (phy_type == MII_LXT971A_ID) - printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name); - else if (phy_type == MII_RTL8201_ID) - printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name); - else if (phy_type == MII_BCM5221_ID) - printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name); - else if (phy_type == MII_DP83847_ID) - printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name); - else if (phy_type == MII_DP83848_ID) - printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); - else if (phy_type == MII_AC101L_ID) - printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); - else if (phy_type == MII_KS8721_ID) - printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); - else if (phy_type == MII_T78Q21x3_ID) - printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name); - else if (phy_type == MII_LAN83C185_ID) - printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name); - - return 0; -} - -/* - * Detect MAC and PHY and perform initialization - */ -static int __init at91ether_probe(struct platform_device *pdev) +static int __init at91ether_phy_detect(struct at91_private *lp) { unsigned int phyid1, phyid2; - int detected = -1; unsigned long phy_id; unsigned short phy_address = 0; - struct clk *ether_clk; - ether_clk = clk_get(&pdev->dev, "ether_clk"); - if (IS_ERR(ether_clk)) { - printk(KERN_ERR "at91_ether: no clock defined\n"); - return -ENODEV; - } - clk_enable(ether_clk); /* Enable Peripheral clock */ - - while ((detected != 0) && (phy_address < 32)) { + while (phy_address < PHY_MAX_ADDR) { /* Read the PHY ID registers */ - enable_mdi(); - read_phy(phy_address, MII_PHYSID1, &phyid1); - read_phy(phy_address, MII_PHYSID2, &phyid2); - disable_mdi(); + enable_mdi(lp); + read_phy(lp, phy_address, MII_PHYSID1, &phyid1); + read_phy(lp, phy_address, MII_PHYSID2, &phyid2); + disable_mdi(lp); phy_id = (phyid1 << 16) | (phyid2 & 0xfff0); switch (phy_id) { @@ -1153,16 +1040,171 @@ static int __init at91ether_probe(struct platform_device *pdev) case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ - detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk); - break; + /* store detected values */ + lp->phy_type = phy_id; /* Type of PHY connected */ + lp->phy_address = phy_address; /* MDI address of PHY */ + return 1; } phy_address++; } - clk_disable(ether_clk); /* Disable Peripheral clock */ + return 0; /* not detected */ +} - return detected; + +/* + * Detect MAC & PHY and perform ethernet interface initialization + */ +static int __init at91ether_probe(struct platform_device *pdev) +{ + struct macb_platform_data *board_data = pdev->dev.platform_data; + struct resource *regs; + struct net_device *dev; + struct at91_private *lp; + int res; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENOENT; + + dev = alloc_etherdev(sizeof(struct at91_private)); + if (!dev) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->board_data = *board_data; + spin_lock_init(&lp->lock); + + dev->base_addr = regs->start; /* physical base address */ + lp->emac_base = ioremap(regs->start, regs->end - regs->start + 1); + if (!lp->emac_base) { + res = -ENOMEM; + goto err_free_dev; + } + + /* Clock */ + lp->ether_clk = clk_get(&pdev->dev, "ether_clk"); + if (IS_ERR(lp->ether_clk)) { + res = -ENODEV; + goto err_ioumap; + } + clk_enable(lp->ether_clk); + + /* Install the interrupt handler */ + dev->irq = platform_get_irq(pdev, 0); + if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) { + res = -EBUSY; + goto err_disable_clock; + } + + /* Allocate memory for DMA Receive descriptors */ + lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL); + if (lp->dlist == NULL) { + res = -ENOMEM; + goto err_free_irq; + } + + ether_setup(dev); + dev->netdev_ops = &at91ether_netdev_ops; + dev->ethtool_ops = &at91ether_ethtool_ops; + platform_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */ + update_mac_address(dev); /* Program ethernet address into MAC */ + + at91_emac_write(lp, AT91_EMAC_CTL, 0); + + if (board_data->is_rmii) + at91_emac_write(lp, AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII); + else + at91_emac_write(lp, AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG); + + /* Detect PHY */ + if (!at91ether_phy_detect(lp)) { + printk(KERN_ERR "at91_ether: Could not detect ethernet PHY\n"); + res = -ENODEV; + goto err_free_dmamem; + } + + initialize_phy(lp); + + lp->mii.dev = dev; /* Support for ethtool */ + lp->mii.mdio_read = mdio_read; + lp->mii.mdio_write = mdio_write; + lp->mii.phy_id = lp->phy_address; + lp->mii.phy_id_mask = 0x1f; + lp->mii.reg_num_mask = 0x1f; + + /* Register the network interface */ + res = register_netdev(dev); + if (res) + goto err_free_dmamem; + + /* Determine current link speed */ + spin_lock_irq(&lp->lock); + enable_mdi(lp); + update_linkspeed(dev, 0); + disable_mdi(lp); + spin_unlock_irq(&lp->lock); + netif_carrier_off(dev); /* will be enabled in open() */ + + /* If board has no PHY IRQ, use a timer to poll the PHY */ + if (gpio_is_valid(lp->board_data.phy_irq_pin)) { + gpio_request(board_data->phy_irq_pin, "ethernet_phy"); + } else { + /* If board has no PHY IRQ, use a timer to poll the PHY */ + init_timer(&lp->check_timer); + lp->check_timer.data = (unsigned long)dev; + lp->check_timer.function = at91ether_check_link; + } + + /* Display ethernet banner */ + printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%pM)\n", + dev->name, (uint) dev->base_addr, dev->irq, + at91_emac_read(lp, AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-", + at91_emac_read(lp, AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex", + dev->dev_addr); + if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) + printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)"); + else if (lp->phy_type == MII_LXT971A_ID) + printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name); + else if (lp->phy_type == MII_RTL8201_ID) + printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name); + else if (lp->phy_type == MII_BCM5221_ID) + printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name); + else if (lp->phy_type == MII_DP83847_ID) + printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name); + else if (lp->phy_type == MII_DP83848_ID) + printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); + else if (lp->phy_type == MII_AC101L_ID) + printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); + else if (lp->phy_type == MII_KS8721_ID) + printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); + else if (lp->phy_type == MII_T78Q21x3_ID) + printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name); + else if (lp->phy_type == MII_LAN83C185_ID) + printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name); + + clk_disable(lp->ether_clk); /* Disable Peripheral clock */ + + return 0; + + +err_free_dmamem: + platform_set_drvdata(pdev, NULL); + dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys); +err_free_irq: + free_irq(dev->irq, dev); +err_disable_clock: + clk_disable(lp->ether_clk); + clk_put(lp->ether_clk); +err_ioumap: + iounmap(lp->emac_base); +err_free_dev: + free_netdev(dev); + return res; } static int __devexit at91ether_remove(struct platform_device *pdev) @@ -1170,8 +1212,7 @@ static int __devexit at91ether_remove(struct platform_device *pdev) struct net_device *dev = platform_get_drvdata(pdev); struct at91_private *lp = netdev_priv(dev); - if (gpio_is_valid(lp->board_data.phy_irq_pin) && - lp->board_data.phy_irq_pin >= 32) + if (gpio_is_valid(lp->board_data.phy_irq_pin)) gpio_free(lp->board_data.phy_irq_pin); unregister_netdev(dev); diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h index 3725fbb0defe..0ef6328fa7f8 100644 --- a/drivers/net/ethernet/cadence/at91_ether.h +++ b/drivers/net/ethernet/cadence/at91_ether.h @@ -88,6 +88,7 @@ struct at91_private struct macb_platform_data board_data; /* board-specific * configuration (shared with * macb for common data */ + void __iomem *emac_base; /* base register address */ struct clk *ether_clk; /* clock */ /* PHY */