From 264f5f2673d6c60de7233b8437b56717475a48f3 Mon Sep 17 00:00:00 2001 From: Rob Rice Date: Fri, 3 Feb 2017 12:55:34 -0500 Subject: [PATCH 001/180] arm64: dts: NS2: Add Broadcom SPU driver DT entry Add Northstar2 device tree entry for Broadcom Secure Processing Unit (SPU) crypto hardware. Signed-off-by: Steve Lin Signed-off-by: Rob Rice Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/ns2.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 9f9e203c09c5..b8503fc1bb54 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -217,6 +217,12 @@ brcm,use-bcm-hdr; }; + crypto0: crypto@612d0000 { + compatible = "brcm,spum-crypto"; + reg = <0x612d0000 0x900>; + mboxes = <&pdc0 0>; + }; + pdc1: iproc-pdc1@612e0000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0x612e0000 0x445>; /* PDC FS1 regs */ @@ -226,6 +232,12 @@ brcm,use-bcm-hdr; }; + crypto1: crypto@612f0000 { + compatible = "brcm,spum-crypto"; + reg = <0x612f0000 0x900>; + mboxes = <&pdc1 0>; + }; + pdc2: iproc-pdc2@61300000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0x61300000 0x445>; /* PDC FS2 regs */ @@ -235,6 +247,12 @@ brcm,use-bcm-hdr; }; + crypto2: crypto@61310000 { + compatible = "brcm,spum-crypto"; + reg = <0x61310000 0x900>; + mboxes = <&pdc2 0>; + }; + pdc3: iproc-pdc3@61320000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0x61320000 0x445>; /* PDC FS3 regs */ @@ -244,6 +262,12 @@ brcm,use-bcm-hdr; }; + crypto3: crypto@61330000 { + compatible = "brcm,spum-crypto"; + reg = <0x61330000 0x900>; + mboxes = <&pdc3 0>; + }; + dma0: dma@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; From 66aef3cb9125583522d7d8da38d420d77287728a Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 9 Feb 2017 17:05:21 -0800 Subject: [PATCH 002/180] arm64: dts: rockchip: sort rk3399-pcie by unit address f8000000 is less than all the other (top-level) unit addresses. Signed-off-by: Brian Norris Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 88 ++++++++++++------------ 1 file changed, 44 insertions(+), 44 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 8e6d1bdeb9c3..d8dda8b97b43 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -211,6 +211,50 @@ }; }; + pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + reg = <0x0 0xf8000000 0x0 0x2000000>, + <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + aspm-no-l0s; + bus-range = <0x0 0x1>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + interrupts = , + , + ; + interrupt-names = "sys", "legacy", "client"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + max-link-speed = <1>; + msi-map = <0x0 &its 0x0 0x1000>; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 + 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + gmac: ethernet@fe300000 { compatible = "rockchip,rk3399-gmac"; reg = <0x0 0xfe300000 0x0 0x10000>; @@ -275,50 +319,6 @@ status = "disabled"; }; - pcie0: pcie@f8000000 { - compatible = "rockchip,rk3399-pcie"; - reg = <0x0 0xf8000000 0x0 0x2000000>, - <0x0 0xfd000000 0x0 0x1000000>; - reg-names = "axi-base", "apb-base"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - aspm-no-l0s; - bus-range = <0x0 0x1>; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - interrupts = , - , - ; - interrupt-names = "sys", "legacy", "client"; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - max-link-speed = <1>; - msi-map = <0x0 &its 0x0 0x1000>; - phys = <&pcie_phy>; - phy-names = "pcie-phy"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 - 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, - <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - status = "disabled"; - - pcie0_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; From 0fb1fd20043f619e444720062e61cdc40130c0c5 Mon Sep 17 00:00:00 2001 From: Dien Pham Date: Thu, 26 Jan 2017 09:52:27 +0100 Subject: [PATCH 003/180] arm64: dts: r8a7796: Add I2C for DVFS device node This patch adds I2C for DVFS device node for R8A7796 SoC. Signed-off-by: Dien Pham Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index f7120cdedd0d..c95ad177b097 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -25,6 +25,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + i2c7 = &i2c_dvfs; }; psci { @@ -269,6 +270,19 @@ #power-domain-cells = <1>; }; + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7796", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; From d8e62f0729bb404caa6ba42b65d5a1e4d370a6e3 Mon Sep 17 00:00:00 2001 From: Dien Pham Date: Thu, 26 Jan 2017 09:52:28 +0100 Subject: [PATCH 004/180] arm64: dts: r8a7796: salvator-x: Add I2C for DVFS device support This patch adds support of I2C for DVFS device for Salvator-X board on R8A7796 SoC. Signed-off-by: Dien Pham Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index c7f40f8f3169..61f4662db497 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -261,3 +261,7 @@ timeout-sec = <60>; status = "okay"; }; + +&i2c_dvfs { + status = "okay"; +}; From d7e0d64a46f97f67ecbc0194ce6a394f512109c5 Mon Sep 17 00:00:00 2001 From: Keita Kobayashi Date: Thu, 26 Jan 2017 09:52:29 +0100 Subject: [PATCH 005/180] arm64: dts: r8a7795: Add I2C for DVFS core to dtsi This patch adds I2C for DVFS device support for R8A7795 SoC. Signed-off-by: Keita Kobayashi Signed-off-by: Gaku Inami Signed-off-by: Dien Pham Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index eac4f29aa5cd..fe266bb3d913 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -25,6 +25,7 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + i2c7 = &i2c_dvfs; }; psci { @@ -793,6 +794,19 @@ status = "disabled"; }; + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7795", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; From 006ced572a3b2247639ce06443aff00704888001 Mon Sep 17 00:00:00 2001 From: Keita Kobayashi Date: Thu, 26 Jan 2017 09:52:30 +0100 Subject: [PATCH 006/180] arm64: dts: r8a7795: salvator-x: Enable I2C for DVFS device This patch enables I2C for DVFS device for for Salvator-X board on R8A7795 SoC. Signed-off-by: Keita Kobayashi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman Reviewed-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 7a8986edcdc0..dc1177c76aa5 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -485,6 +485,10 @@ clock-frequency = <22579200>; }; +&i2c_dvfs { + status = "okay"; +}; + &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; From a262d66224c4c34bc2bee16d4d37d460a738788c Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Thu, 26 Jan 2017 18:13:52 +0300 Subject: [PATCH 007/180] arm64: dts: h3ulcb: Update memory node to 4 GiB map This patch adds memory region: - After changes, the H3ULCB board has the following map: Bank0: 1GiB RAM : 0x000048000000 -> 0x0007fffffff Bank1: 1GiB RAM : 0x000500000000 -> 0x0053fffffff Bank2: 1GiB RAM : 0x000600000000 -> 0x0063fffffff Bank3: 1GiB RAM : 0x000700000000 -> 0x0073fffffff - Before changes, the old map looked like this: Bank0: 1GiB RAM : 0x000048000000 -> 0x0007fffffff Signed-off-by: Vladimir Barinov Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index c5f8f69a4f5f..9811534f296e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -33,6 +33,21 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; + leds { compatible = "gpio-leds"; From dda3887907d743385f2599fa18c765bd295ae2da Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Wed, 1 Feb 2017 09:42:00 +0100 Subject: [PATCH 008/180] arm64: dts: r8a7795: Use rgmii-txid phy-mode for EthernetAVB Since commit 61fccb2d6274 ("ravb: Add tx and rx clock internal delays mode of APSR") the EthernetAVB driver enables tx and rx clock internal delay modes (TDM and RDM) depending on the phy mode as follows: phy mode | ASPR delay mode -----------+---------------- rgmii-id | TDM and RDM rgmii-rxid | RDM rgmii-txid | TDM And prior to the above commit no internal delay mode settings were implemented for any phy mode. With this and the above change present tx internal delay mode is enabled which has been observed to address failures in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. With the above patch present but this patch present tx and rx internal delay modes are enabled; and with the above patch and this present absent no internal delay modes are enabled. In both cases failures have been observed when using 1Gbps communication in the environments described above. Signed-off-by: Kazuya Mizuguchi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index fe266bb3d913..382a8987bca9 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -564,7 +564,7 @@ "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - phy-mode = "rgmii-id"; + phy-mode = "rgmii-txid"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; From 0e45da1c6ea6b18616d95c697ecd6234bc504ef6 Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Wed, 1 Feb 2017 09:42:01 +0100 Subject: [PATCH 009/180] arm64: dts: r8a7795: salvator-x: Fix EthernetAVB PHY timing Set PHY rxc-skew-ps to 1500 and all other values to their default values. This is intended to to address failures in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. Signed-off-by: Kazuya Mizuguchi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index dc1177c76aa5..5158ba3f9ce3 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -497,18 +497,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; From 5b9fd1962f605a31842371471e559407c293131f Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Wed, 1 Feb 2017 09:42:02 +0100 Subject: [PATCH 010/180] arm64: dts: h3ulcb: Fix EthernetAVB PHY timing Set PHY rxc-skew-ps to 1500 and all other values to their default values. This is intended to to address failures in the case of 1Gbps communication using the by h3ulcb board with the KSZ9031RNX phy. Signed-off-by: Vladimir Barinov Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 9811534f296e..69c623faf80c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -354,18 +354,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; From 325f39010b431f6a1ece74d69f10dcca2329c08d Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Wed, 1 Feb 2017 09:42:03 +0100 Subject: [PATCH 011/180] arm64: dts: r8a7796: Use rgmii-txid phy-mode for EthernetAVB Since commit 61fccb2d6274 ("ravb: Add tx and rx clock internal delays mode of APSR") the EthernetAVB driver enables tx and rx clock internal delay modes (TDM and RDM) depending on the phy mode as follows: phy mode | ASPR delay mode -----------+---------------- rgmii-id | TDM and RDM rgmii-rxid | RDM rgmii-txid | TDM And prior to the above commit no internal delay mode settings were implemented for any phy mode. With this and the above change present tx internal delay mode is enabled which has been observed to address failures in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. With the above patch present but this patch present tx and rx internal delay modes are enabled; and with the above patch and this present absent no internal delay modes are enabled. In both cases failures have been observed when using 1Gbps communication in the environments described above. Signed-off-by: Kazuya Mizuguchi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index c95ad177b097..1c1c1eae9cba 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -483,7 +483,7 @@ "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - phy-mode = "rgmii-id"; + phy-mode = "rgmii-txid"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; From ef3f08c83fd186ab4bbad6a6250c5a347fbf6551 Mon Sep 17 00:00:00 2001 From: Kazuya Mizuguchi Date: Wed, 1 Feb 2017 09:42:04 +0100 Subject: [PATCH 012/180] arm64: dts: r8a7796: salvator-x: Fix EthernetAVB PHY timing Set PHY rxc-skew-ps to 1500 and all other values to their default values. This is intended to to address failures in the case of 1Gbps communication using the by salvator-x board with the KSZ9031RNX phy. This has been reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs. Signed-off-by: Kazuya Mizuguchi Signed-off-by: Takeshi Kihara Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 61f4662db497..93ed23ab71bb 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -172,18 +172,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; From b6ff27217e58d3b3a900debbd90924375aa62d30 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:41 +0100 Subject: [PATCH 013/180] ARM64: dts: meson-gxbb-odroidc2: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also explicitly specify the phy-mode instead of relying on the default-value from meson-gx.dtsi. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c59403adb387..6b5579522587 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -152,6 +152,11 @@ pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; mdio { compatible = "snps,dwmac-mdio"; From 2f739c17507e339edd8cfad1c1af5580e261a853 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:42 +0100 Subject: [PATCH 014/180] ARM64: dts: meson-gxbb-p200: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-p200.dts | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index fc0e86cb4cde..acb035d119d7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -96,6 +96,29 @@ }; }; +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@3 { + /* Micrel KSZ9031 (0x00221620) */ + reg = <3>; + }; + }; +}; + &i2c_B { status = "okay"; pinctrl-0 = <&i2c_b_pins>; From 1220b29749d4e2afb2213a652a237b9669382852 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:43 +0100 Subject: [PATCH 015/180] ARM64: dts: meson-gxbb-vega-s95: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 86709929fd20..aa571970c5e9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -115,7 +115,6 @@ status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; - }; &ir { @@ -128,6 +127,24 @@ status = "okay"; pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; }; &usb0_phy { From 67d49f3066649b423d788a2b84cfeb83af7f3a59 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:44 +0100 Subject: [PATCH 016/180] ARM64: dts: meson-gxbb-nexbox-a95x: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 4cbd626a9e88..dbfa441f479e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -164,7 +164,24 @@ status = "okay"; pinctrl-0 = <ð_rmii_pins>; pinctrl-names = "default"; + + phy-handle = <ð_phy0>; phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101GR (0x02430c54) */ + reg = <0>; + }; + }; }; &ir { From be5f7befbd75ec95f0d444813ae85e26851eff3b Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:45 +0100 Subject: [PATCH 017/180] ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 56f855901262..50eb8f06d35b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -64,3 +64,27 @@ status = "disabled"; }; }; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; From 695dcb2ba1363d06384b8e98c1adc46e79b36239 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:46 +0100 Subject: [PATCH 018/180] ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../dts/amlogic/meson-gxbb-wetek-play2.dts | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index ea79fdd2c248..ee86af928722 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -87,6 +87,30 @@ }; }; +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; From 23edd1b2d83c384949b5f77cdb940006a5d56279 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:47 +0100 Subject: [PATCH 019/180] ARM64: dts: meson-gxbb-p201: fix ethernet support Amlogic's own .dts specifies that the P201 board uses a RMII PHY (with the reset GPIO being GPIOZ_14). However our P201 board .dts simply inherits the phy-mode setting from from meson-gx.dtsi where it defaults to RGMII mode. Remove all ethernet settings from meson-gxbb-p20x.dtsi as it only specifies the RGMII pins which are only valid for the P200 board. Instead we add the ethmac node to the meson-gxbb-p201.dts and configure the pinctrl property and the phy-mode for an RMII PHY. An MDIO node (which would also specify the PHY) is not added since we don't know which PHY is being used (and thus which PHY address would have to be used). Signed-off-by: Martin Blumenstingl Acked-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts | 11 +++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 ------ 2 files changed, 11 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 39bb037a3e47..ae3194663d64 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -50,3 +50,14 @@ compatible = "amlogic,p201", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P201 Development Board"; }; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 4a96e0f6f926..17ebe46e48d4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -144,12 +144,6 @@ pinctrl-names = "default"; }; -ðmac { - status = "okay"; - pinctrl-0 = <ð_rgmii_pins>; - pinctrl-names = "default"; -}; - &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; From 093d23db4fffeb9ed26d2a41907c02969df8355b Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:48 +0100 Subject: [PATCH 020/180] ARM64: dts: amlogic: add the ethernet TX delay configuration This adds the amlogic,tx-delay-ns property with the old (hardcoded) default value of 2ns to all boards which are using an RGMII ethernet PHY. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 ++ arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 2 ++ 8 files changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 6b5579522587..c80d3a913907 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -158,6 +158,8 @@ snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; + amlogic,tx-delay-ns = <2>; + mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index acb035d119d7..2054a474e0a9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -103,6 +103,8 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; + amlogic,tx-delay-ns = <2>; + snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index aa571970c5e9..aefa66dff72d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -131,6 +131,8 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; + amlogic,tx-delay-ns = <2>; + snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 50eb8f06d35b..f057fb48fee5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -73,6 +73,8 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; + amlogic,tx-delay-ns = <2>; + snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index ee86af928722..743acb5f5d06 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -95,6 +95,8 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; + amlogic,tx-delay-ns = <2>; + snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index f66939cacd37..7663d6775823 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -59,6 +59,8 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + /* External PHY reset is shared with internal PHY Led signals */ snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 5a337d339df1..a0bc746adb42 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -162,6 +162,8 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 5dbc66088355..e6ac39b712b7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -59,6 +59,8 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + /* External PHY reset is shared with internal PHY Led signals */ snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; From c344698648af9010699f8f68e7833e183f178834 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:49 +0100 Subject: [PATCH 021/180] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx The ethmac node has to be configured for each board due to different pinctrl nodes for RGMII/RMII. Thus the phy-mode should be specified at the same place (= in the board .dts), making it easier to read the board .dts file (because the phy-mode is stated explicitly, without requiring developers to read all "parent" .dtsi as well). Signed-off-by: Martin Blumenstingl Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 5d995f7724af..d544b8f2ffbf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -410,7 +410,6 @@ 0x0 0xc8834540 0x0 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - phy-mode = "rgmii"; status = "disabled"; }; From 14767520517b3e4b2c045eca95d232457c460a8f Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Wed, 22 Feb 2017 17:31:30 +0100 Subject: [PATCH 022/180] dt-bindings: Add vendor prefix for Hwacom Systems Inc. Hwacom Systems Inc. is a broadband system integrator and supplier of mobile, fixed and IP networks related services as well as multimedia application. Website: http://www.hwacom.com/ Signed-off-by: Carlo Caione Acked-by: Rob Herring [khilman: change shortlog prefix to dt-bindings] Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ec0bfb9bbebd..da05060803b2 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -136,6 +136,7 @@ holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard holtek Holtek Semiconductor, Inc. +hwacom HwaCom Systems Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. From b5027603c4c77a5cac750c5ec35125e875a53e55 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 26 Feb 2017 14:04:09 +0900 Subject: [PATCH 023/180] arm64: dts: uniphier: fix no unit name warnings Fix warnings reported when built with W=1: Node /memory has a reg or ranges property, but no unit name Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 7168cf818ad8..1b96e243e1e3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -52,7 +52,7 @@ model = "UniPhier LD11 Reference Board"; compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11"; - memory { + memory@80000000 { device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index da881f5b6ed4..2ed35e39daec 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -140,7 +140,7 @@ <1 10 4>; }; - soc { + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 609162a1a322..8cb0f1130b1b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -52,7 +52,7 @@ model = "UniPhier LD20 Reference Board"; compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; - memory { + memory@80000000 { device_type = "memory"; reg = <0 0x80000000 0 0xc0000000>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index a6b3a70dae83..96c053f1911e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -209,7 +209,7 @@ <1 10 4>; }; - soc { + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; From 68cd161072605c276d4e6c8cd06fbe7b00a0f680 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 7 Dec 2016 17:44:47 +0100 Subject: [PATCH 024/180] arm64: dts: r8a7796 dtsi: Add all HSCIF nodes Add the device nodes for all HSCIF serial ports, incl. clocks, and power domain. Signed-off-by: Ulrich Hecht Reviewed-by: Geert Uytterhoeven [simon: express register size in hex; refer to power domain in changelog] Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 70 ++++++++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 1c1c1eae9cba..714fd96b29eb 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -489,6 +489,76 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a7796", "renesas,rcar-gen3-scif", "renesas,scif"; From 19d76f3ec8fc6ff38f1c5ca534d75a957c8661ea Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 7 Dec 2016 17:44:26 +0100 Subject: [PATCH 025/180] arm64: dts: r8a7796: Add all SCIF nodes Add the device nodes for all R-Car H3 SCIF serial ports, incl. clocks and power domain. Signed-off-by: Ulrich Hecht Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 65 ++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 714fd96b29eb..5fb93fc043c2 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -559,6 +559,32 @@ status = "disabled"; }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a7796", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -572,6 +598,45 @@ status = "disabled"; }; + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = ; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7796", "renesas,rcar-gen3-msiof"; From dbcae5ea4bd27409291e3329c9106f37f0118590 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 7 Dec 2016 17:44:27 +0100 Subject: [PATCH 026/180] arm64: dts: r8a7796: Enable SCIF DMA Signed-off-by: Ulrich Hecht Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 5fb93fc043c2..951e351ddae1 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -568,6 +568,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -581,6 +584,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -607,6 +613,8 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -620,6 +628,8 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -633,6 +643,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; From d5566d251f5e839e36db8db8105d8f8f57e54768 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Fri, 3 Feb 2017 11:38:20 +0100 Subject: [PATCH 027/180] arm64: dts: r8a7796: salvator-x: add SCIF1 (DEBUG1) Enables the SCIF hooked up to the DEBUG1 connector. Signed-off-by: Ulrich Hecht Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 93ed23ab71bb..74b8c653c9fe 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -18,6 +18,7 @@ aliases { serial0 = &scif2; + serial1 = &scif1; ethernet0 = &avb; }; @@ -113,6 +114,11 @@ function = "avb"; }; + scif1_pins: scif1 { + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -228,6 +234,14 @@ status = "okay"; }; +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; From 6d50bb8935042c4b7747b57df064ff41295e4769 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Wed, 7 Dec 2016 17:44:48 +0100 Subject: [PATCH 028/180] arm64: dts: r8a7796: Enable HSCIF DMA Signed-off-by: Ulrich Hecht Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 951e351ddae1..aa404ed9142e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -499,6 +499,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -513,6 +516,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -527,6 +533,9 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -541,6 +550,8 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; @@ -555,6 +566,8 @@ <&cpg CPG_CORE R8A7796_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; From 799a75abdef348500bab14e873e7711afa426aaf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Feb 2017 14:59:27 +0100 Subject: [PATCH 029/180] arm64: dts: r8a7795: Add Cortex-A53 CPU cores This patch adds Cortex-A53 CPU cores to r8a7795 SoC for a total of 8 cores (4 x Cortex-A57 + 4 x Cortex-A53). Based on work by Takeshi Kihara and Dirk Behme. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 46 +++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 382a8987bca9..61830697e33c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -73,6 +73,42 @@ enable-method = "psci"; }; + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA57: cache-controller@0 { compatible = "cache"; reg = <0>; @@ -166,7 +202,7 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = ; + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -307,13 +343,13 @@ timer { compatible = "arm,armv8-timer"; interrupts = , + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, , + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, , + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, ; + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; cpg: clock-controller@e6150000 { From 9190748fd608dc3aa80edacab9e6818f2d6f71b6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 24 Feb 2017 14:59:28 +0100 Subject: [PATCH 030/180] arm64: dts: r8a7795: Add Cortex-A53 PMU node Enable the performance monitor unit for the Cortex-A53 cores on the R8A7795 SoC. Extracted from a patch by Takeshi Kihara in the BSP. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 61830697e33c..3573872974e0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -340,6 +340,18 @@ <&a57_3>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = Date: Fri, 24 Feb 2017 14:49:13 +0100 Subject: [PATCH 031/180] arm64: dts: r8a7795: Upgrade to PSCI v1.0 to support Suspend-to-RAM >From PSCI v1.0, Suspend-to-RAM is supported via SYSTEM_SUSPEND PSCI function call. Hence, upgrade PSCI version for R-Car H3 to support Suspend-to-RAM. The Suspend-to-RAM is highly dependent on ARM Trusted Firwmare support since necessary callback functions will be registered after a query to ARM Trusted Firmware about SYSTEM_SUSPEND support. Since PSCI v1.0 is backward compatible with PSCI v0.2, CPU Hotplug and CPUIdle should be able to work normally with this change. Signed-off-by: Khiem Nguyen Signed-off-by: Takeshi Kihara [geert: Keep "arm,psci-0.2"] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 3573872974e0..c1e00a3e7c45 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -29,7 +29,7 @@ }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; }; From b3f26910c0daafded536cf5edceab2ab469252cb Mon Sep 17 00:00:00 2001 From: Khiem Nguyen Date: Fri, 24 Feb 2017 14:49:14 +0100 Subject: [PATCH 032/180] arm64: dts: r8a7796: Upgrade to PSCI v1.0 to support Suspend-to-RAM >From PSCI v1.0, Suspend-to-RAM is supported via SYSTEM_SUSPEND PSCI function call. Hence, upgrade PSCI version for R-Car M3-W to support Suspend-to-RAM. The Suspend-to-RAM is highly dependent on ARM Trusted Firwmare support since necessary callback functions will be registered after a query to ARM Trusted Firmware about SYSTEM_SUSPEND support. Since PSCI v1.0 is backward compatible with PSCI v0.2, CPU Hotplug and CPUIdle should be able to work normally with this change. Signed-off-by: Khiem Nguyen Signed-off-by: Takeshi Kihara [geert: Keep "arm,psci-0.2"] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index aa404ed9142e..dbf82bc6ba64 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -29,7 +29,7 @@ }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; }; From d165856de103a6d317a9c9a5782eacd5dc90a9dc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Mar 2017 14:18:16 +0100 Subject: [PATCH 033/180] arm64: dts: r8a7795: Remove unit-addresses and regs from integrated caches The Cortex-A57/A53 cache controllers are integrated controllers, and thus the device nodes representing them should not have unit-addresses or reg properties. Fixes: 6f7bf82cc912441f ("arm64: dts: r8a7795: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index c1e00a3e7c45..14772bc02125 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -109,17 +109,15 @@ enable-method = "psci"; }; - L2_CA57: cache-controller@0 { + L2_CA57: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7795_PD_CA57_SCU>; cache-unified; cache-level = <2>; }; - L2_CA53: cache-controller@100 { + L2_CA53: cache-controller-1 { compatible = "cache"; - reg = <0x100>; power-domains = <&sysc R8A7795_PD_CA53_SCU>; cache-unified; cache-level = <2>; From 57a4fd420c6e8a04b6a87ff24d34250cd7c48f15 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Mar 2017 14:18:17 +0100 Subject: [PATCH 034/180] arm64: dts: r8a7796: Remove unit-address and reg from integrated cache The Cortex-A57 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 1561f20760ec96db ("arm64: dts: r8a7796: Add Renesas R8A7796 SoC support") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index dbf82bc6ba64..27f7dd9bd988 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -47,9 +47,8 @@ enable-method = "psci"; }; - L2_CA57: cache-controller@0 { + L2_CA57: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7796_PD_CA57_SCU>; cache-unified; cache-level = <2>; From 7d73a4da2681dc5d04e8ed9f4aa96c1deed2dbc5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Niklas=20S=C3=B6derlund?= Date: Mon, 5 Dec 2016 18:43:10 +0100 Subject: [PATCH 035/180] arm64: dts: r8a7795: salvator-x: Set drive-strength for ravb pins MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EthernetAVB should not depend on the bootloader to setup correct drive-strength values. Values for drive-strength where found by examining the registers after the bootloader has configured the registers and successfully used the EthernetAVB. Signed-off-by: Niklas Söderlund Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- .../boot/dts/renesas/r8a7795-salvator-x.dts | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 5158ba3f9ce3..277ab8484e0c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -247,8 +247,22 @@ }; avb_pins: avb { - groups = "avb_mdc"; - function = "avb"; + mux { + groups = "avb_link", "avb_phy_int", "avb_mdc", + "avb_mii"; + function = "avb"; + }; + + pins_mdc { + groups = "avb_mdc"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; }; du_pins: du { From b5a8ffad0eb0c1e5e601253edac163b2da9e855d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 7 Mar 2017 05:30:06 +0000 Subject: [PATCH 036/180] arm64: dts: r8a7795: Tidyup Audio-DMAC channel for DVC Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1. Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0. Because of this, current platform board (using SRC/DVC/SSI) Playback/Capture both will use same Audio-DMAC0 (but it depends on audio data path). First note is that this "rx" and "tx" are from each IP point, it doesn't mean Playback/Capture. Second note is that Audio DMAC assigned on DT is only for Audio-DMAC, Audio-DMAC-peri-peri has no entry. => Audio-DMAC -> Audio-DMAC-peri-peri -- HW connection Playback case [Mem] => [SRC]--[DVC] -> [SSI]--[Codec] rx ~~~~~~~~~~~~ Capture [Mem] <= [DVC]--[SRC] <- [SSI]--[Codec] tx ~~~~~~~~~~~~ Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 14772bc02125..55c09f1b89c9 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1075,11 +1075,11 @@ rcar_sound,dvc { dvc0: dvc-0 { - dmas = <&audma0 0xbc>; + dmas = <&audma1 0xbc>; dma-names = "tx"; }; dvc1: dvc-1 { - dmas = <&audma0 0xbe>; + dmas = <&audma1 0xbe>; dma-names = "tx"; }; }; From 67972c55d634e27dc6f7ba1be482ec057ec5dd30 Mon Sep 17 00:00:00 2001 From: Abhimanyu Saini Date: Wed, 1 Feb 2017 11:58:34 +0530 Subject: [PATCH 037/180] dt-bindings: Add compatible for LS2088A QDS and RDB board Signed-off-by: Abhimanyu Saini Signed-off-by: Priyanka Jain Signed-off-by: Ashish Kumar Acked-by: Rob Herring Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/arm/fsl.txt | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index c9c567ae227f..645e8ff8e132 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -195,3 +195,14 @@ LS2080A ARMv8 based RDB Board Required root node properties: - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; +LS2088A SoC +Required root node properties: + - compatible = "fsl,ls2088a"; + +LS2088A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; + +LS2088A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; From c2f6a472be3aadd4a41f4383b0a03c2cd83d825e Mon Sep 17 00:00:00 2001 From: Abhimanyu Saini Date: Wed, 1 Feb 2017 11:58:35 +0530 Subject: [PATCH 038/180] arm64: dts: freescale: ls2080a: Split devicetree for code resuability LS2088A and LS2080A are similar SoCs with a few differences like ARM cores etc. Reorganize the LS2080A device tree to move the common nodes to: - fsl-ls208xa.dtsi - fsl-ls208xa-rdb.dtsi - fsl-ls208xa-qds.dtsi Signed-off-by: Priyanka Jain Signed-off-by: Ashish Kumar Signed-off-by: Abhimanyu Saini Signed-off-by: Shawn Guo --- .../boot/dts/freescale/fsl-ls2080a-qds.dts | 155 +--- .../boot/dts/freescale/fsl-ls2080a-rdb.dts | 110 +-- .../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 875 ++---------------- .../boot/dts/freescale/fsl-ls208xa-qds.dtsi | 196 ++++ .../boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 151 +++ .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 737 +++++++++++++++ 6 files changed, 1188 insertions(+), 1036 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index 8bc1f8f6fcfc..c1e76dfca48e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,8 +1,9 @@ /* * Device Tree file for Freescale LS2080a QDS Board. * - * Copyright (C) 2015, Freescale Semiconductor + * Copyright (C) 2015-17, Freescale Semiconductor * + * Abhimanyu Saini * Bhupesh Sharma * * This file is dual-licensed: you can use it either under the terms @@ -47,6 +48,7 @@ /dts-v1/; #include "fsl-ls2080a.dtsi" +#include "fsl-ls208xa-qds.dtsi" / { model = "Freescale Layerscape 2080a QDS Board"; @@ -61,154 +63,3 @@ stdout-path = "serial0:115200n8"; }; }; - -&esdhc { - status = "okay"; -}; - -&ifc { - status = "okay"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0x0 0x0 0x5 0x80000000 0x08000000 - 0x2 0x0 0x5 0x30000000 0x00010000 - 0x3 0x0 0x5 0x20000000 0x00010000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - }; - - nand@2,0 { - compatible = "fsl,ifc-nand"; - reg = <0x2 0x0 0x10000>; - }; - - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; - }; -}; - -&i2c0 { - status = "okay"; - pca9547@77 { - compatible = "nxp,pca9547"; - reg = <0x77>; - #address-cells = <1>; - #size-cells = <0>; - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00>; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x02>; - - ina220@40 { - compatible = "ti,ina220"; - reg = <0x40>; - shunt-resistor = <500>; - }; - - ina220@41 { - compatible = "ti,ina220"; - reg = <0x41>; - shunt-resistor = <1000>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x3>; - - adt7481@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - }; - }; -}; - -&i2c1 { - status = "disabled"; -}; - -&i2c2 { - status = "disabled"; -}; - -&i2c3 { - status = "disabled"; -}; - -&dspi { - status = "okay"; - dflash0: n25q128a { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <0>; - }; - dflash1: sst25wf040b { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <1>; - }; - dflash2: en25s64 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <2>; - }; -}; - -&qspi { - status = "okay"; - flash0: s25fl256s1@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; - flash2: s25fl256s1@2 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&sata0 { - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 2ff46ca450b1..18ad19587311 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,8 +1,9 @@ /* * Device Tree file for Freescale LS2080a RDB Board. * - * Copyright (C) 2015, Freescale Semiconductor + * Copyright (C) 2016-17, Freescale Semiconductor * + * Abhimanyu Saini * Bhupesh Sharma * * This file is dual-licensed: you can use it either under the terms @@ -47,6 +48,7 @@ /dts-v1/; #include "fsl-ls2080a.dtsi" +#include "fsl-ls208xa-rdb.dtsi" / { model = "Freescale Layerscape 2080a RDB Board"; @@ -61,109 +63,3 @@ stdout-path = "serial1:115200n8"; }; }; - -&esdhc { - status = "okay"; -}; - -&ifc { - status = "okay"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0x0 0x0 0x5 0x80000000 0x08000000 - 0x2 0x0 0x5 0x30000000 0x00010000 - 0x3 0x0 0x5 0x20000000 0x00010000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - }; - - nand@2,0 { - compatible = "fsl,ifc-nand"; - reg = <0x2 0x0 0x10000>; - }; - - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; - }; - -}; - -&i2c0 { - status = "okay"; - pca9547@75 { - compatible = "nxp,pca9547"; - reg = <0x75>; - #address-cells = <1>; - #size-cells = <0>; - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01>; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x3>; - - adt7481@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - }; - }; -}; - -&i2c1 { - status = "disabled"; -}; - -&i2c2 { - status = "disabled"; -}; - -&i2c3 { - status = "disabled"; -}; - -&dspi { - status = "okay"; - dflash0: n25q512a { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <0>; - }; -}; - -&qspi { - status = "disabled"; -}; - -&sata0 { - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index e5935f28848c..46a26c021421 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,8 +1,9 @@ /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * - * Copyright (C) 2014-2015, Freescale Semiconductor + * Copyright (C) 2014-2016, Freescale Semiconductor * + * Abhimanyu Saini * Bhupesh Sharma * * This file is dual-licensed: you can use it either under the terms @@ -44,802 +45,122 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include "fsl-ls208xa.dtsi" -/ { - compatible = "fsl,ls2080a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - /* - * We expect the enable-method for cpu's to be "psci", but this - * is dependent on the SoC FW, which will fill this in. - * - * Currently supported enable-method is psci v0.2 - */ - - /* We have 4 clusters having 2 Cortex-A57 cores each */ - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0>; - clocks = <&clockgen 1 0>; - next-level-cache = <&cluster0_l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1>; - clocks = <&clockgen 1 0>; - next-level-cache = <&cluster0_l2>; - }; - - cpu2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x100>; - clocks = <&clockgen 1 1>; - next-level-cache = <&cluster1_l2>; - #cooling-cells = <2>; - }; - - cpu3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x101>; - clocks = <&clockgen 1 1>; - next-level-cache = <&cluster1_l2>; - }; - - cpu4: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x200>; - clocks = <&clockgen 1 2>; - next-level-cache = <&cluster2_l2>; - #cooling-cells = <2>; - }; - - cpu5: cpu@201 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x201>; - clocks = <&clockgen 1 2>; - next-level-cache = <&cluster2_l2>; - }; - - cpu6: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x300>; - clocks = <&clockgen 1 3>; - next-level-cache = <&cluster3_l2>; - #cooling-cells = <2>; - }; - - cpu7: cpu@301 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x301>; - clocks = <&clockgen 1 3>; - next-level-cache = <&cluster3_l2>; - }; - - cluster0_l2: l2-cache0 { - compatible = "cache"; - }; - - cluster1_l2: l2-cache1 { - compatible = "cache"; - }; - - cluster2_l2: l2-cache2 { - compatible = "cache"; - }; - - cluster3_l2: l2-cache3 { - compatible = "cache"; - }; +&cpu { + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>; - /* DRAM space - 1, size : 2 GB DRAM */ + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; }; - sysclk: sysclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-output-names = "sysclk"; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ - <0x0 0x0c0c0000 0 0x2000>, /* GICC */ - <0x0 0x0c0d0000 0 0x1000>, /* GICH */ - <0x0 0x0c0e0000 0 0x20000>; /* GICV */ - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - interrupts = <1 9 0x4>; - - its: gic-its@6020000 { - compatible = "arm,gic-v3-its"; - msi-controller; - reg = <0x0 0x6020000 0 0x20000>; - }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; }; - rstcr: syscon@1e60000 { - compatible = "fsl,ls2080a-rstcr", "syscon"; - reg = <0x0 0x1e60000 0x0 0x4>; + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; - reboot { - compatible ="syscon-reboot"; - regmap = <&rstcr>; - offset = <0x0>; - mask = <0x2>; + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ - <1 14 4>, /* Physical Non-Secure PPI, active-low */ - <1 11 4>, /* Virtual PPI, active-low */ - <1 10 4>; /* Hypervisor PPI, active-low */ - fsl,erratum-a008585; + cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + cpu7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; }; - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clockgen: clocking@1300000 { - compatible = "fsl,ls2080a-clockgen"; - reg = <0 0x1300000 0 0xa0000>; - #clock-cells = <2>; - clocks = <&sysclk>; - }; - - dcfg: dcfg@1e00000 { - compatible = "fsl,ls2080a-dcfg", "syscon"; - reg = <0x0 0x1e00000 0x0 0x10000>; - little-endian; - }; - - tmu: tmu@1f80000 { - compatible = "fsl,qoriq-tmu"; - reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; - little-endian; - #thermal-sensor-cells = <1>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 4>; - - trips { - cpu_alert: cpu-alert { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <85000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu2 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map3 { - trip = <&cpu_alert>; - cooling-device = - <&cpu6 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - serial0: serial@21c0500 { - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; - interrupts = <0 32 0x4>; /* Level high type */ - }; - - serial1: serial@21c0600 { - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; - interrupts = <0 32 0x4>; /* Level high type */ - }; - - cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster1_core1_watchdog: wdt@c010000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster2_core0_watchdog: wdt@c100000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster2_core1_watchdog: wdt@c110000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster3_core0_watchdog: wdt@c200000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc200000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster3_core1_watchdog: wdt@c210000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc210000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster4_core0_watchdog: wdt@c300000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc300000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster4_core1_watchdog: wdt@c310000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc310000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; - #address-cells = <3>; - #size-cells = <1>; - - /* - * Region type 0x0 - MC portals - * Region type 0x1 - QBMAN portals - */ - ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 - 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; - - /* - * Define the maximum number of MACs present on the SoC. - */ - dpmacs { - #address-cells = <1>; - #size-cells = <0>; - - dpmac1: dpmac@1 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x1>; - }; - - dpmac2: dpmac@2 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x2>; - }; - - dpmac3: dpmac@3 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x3>; - }; - - dpmac4: dpmac@4 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x4>; - }; - - dpmac5: dpmac@5 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x5>; - }; - - dpmac6: dpmac@6 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x6>; - }; - - dpmac7: dpmac@7 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x7>; - }; - - dpmac8: dpmac@8 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x8>; - }; - - dpmac9: dpmac@9 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x9>; - }; - - dpmac10: dpmac@a { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xa>; - }; - - dpmac11: dpmac@b { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xb>; - }; - - dpmac12: dpmac@c { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xc>; - }; - - dpmac13: dpmac@d { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xd>; - }; - - dpmac14: dpmac@e { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xe>; - }; - - dpmac15: dpmac@f { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xf>; - }; - - dpmac16: dpmac@10 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x10>; - }; - }; - }; - - smmu: iommu@5000000 { - compatible = "arm,mmu-500"; - reg = <0 0x5000000 0 0x800000>; - #global-interrupts = <12>; - interrupts = <0 13 4>, /* global secure fault */ - <0 14 4>, /* combined secure interrupt */ - <0 15 4>, /* global non-secure fault */ - <0 16 4>, /* combined non-secure interrupt */ - /* performance counter interrupts 0-7 */ - <0 211 4>, <0 212 4>, - <0 213 4>, <0 214 4>, - <0 215 4>, <0 216 4>, - <0 217 4>, <0 218 4>, - /* per context interrupt, 64 interrupts */ - <0 146 4>, <0 147 4>, - <0 148 4>, <0 149 4>, - <0 150 4>, <0 151 4>, - <0 152 4>, <0 153 4>, - <0 154 4>, <0 155 4>, - <0 156 4>, <0 157 4>, - <0 158 4>, <0 159 4>, - <0 160 4>, <0 161 4>, - <0 162 4>, <0 163 4>, - <0 164 4>, <0 165 4>, - <0 166 4>, <0 167 4>, - <0 168 4>, <0 169 4>, - <0 170 4>, <0 171 4>, - <0 172 4>, <0 173 4>, - <0 174 4>, <0 175 4>, - <0 176 4>, <0 177 4>, - <0 178 4>, <0 179 4>, - <0 180 4>, <0 181 4>, - <0 182 4>, <0 183 4>, - <0 184 4>, <0 185 4>, - <0 186 4>, <0 187 4>, - <0 188 4>, <0 189 4>, - <0 190 4>, <0 191 4>, - <0 192 4>, <0 193 4>, - <0 194 4>, <0 195 4>, - <0 196 4>, <0 197 4>, - <0 198 4>, <0 199 4>, - <0 200 4>, <0 201 4>, - <0 202 4>, <0 203 4>, - <0 204 4>, <0 205 4>, - <0 206 4>, <0 207 4>, - <0 208 4>, <0 209 4>; - mmu-masters = <&fsl_mc 0x300 0>; - }; - - dspi: dspi@2100000 { - status = "disabled"; - compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 26 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; - clock-names = "dspi"; - spi-num-chipselects = <5>; - bus-num = <0>; - }; - - esdhc: esdhc@2140000 { - status = "disabled"; - compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; - reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ - clock-frequency = <0>; /* Updated by bootloader */ - voltage-ranges = <1800 1800 3300 3300>; - sdhci,auto-cmd12; - little-endian; - bus-width = <4>; - }; - - gpio0: gpio@2300000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@2310000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@2320000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <0 37 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@2330000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2330000 0x0 0x10000>; - interrupts = <0 37 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2c0: i2c@2000000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <0 34 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - i2c1: i2c@2010000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <0 34 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - i2c2: i2c@2020000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <0 35 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - i2c3: i2c@2030000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <0 35 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - ifc: ifc@2240000 { - compatible = "fsl,ifc", "simple-bus"; - reg = <0x0 0x2240000 0x0 0x20000>; - interrupts = <0 21 0x4>; /* Level high type */ - little-endian; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0 0 0x5 0x80000000 0x08000000 - 2 0 0x5 0x30000000 0x00010000 - 3 0 0x5 0x20000000 0x00010000>; - }; - - qspi: quadspi@20c0000 { - status = "disabled"; - compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20c0000 0x0 0x10000>, - <0x0 0x20000000 0x0 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 25 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "qspi_en", "qspi"; - }; - - pcie@3400000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 108 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, - <0000 0 0 2 &gic 0 0 0 110 4>, - <0000 0 0 3 &gic 0 0 0 111 4>, - <0000 0 0 4 &gic 0 0 0 112 4>; - }; - - pcie@3500000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 113 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, - <0000 0 0 2 &gic 0 0 0 115 4>, - <0000 0 0 3 &gic 0 0 0 116 4>, - <0000 0 0 4 &gic 0 0 0 117 4>; - }; - - pcie@3600000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 118 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <8>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, - <0000 0 0 2 &gic 0 0 0 120 4>, - <0000 0 0 3 &gic 0 0 0 121 4>, - <0000 0 0 4 &gic 0 0 0 122 4>; - }; - - pcie@3700000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 123 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, - <0000 0 0 2 &gic 0 0 0 125 4>, - <0000 0 0 3 &gic 0 0 0 126 4>, - <0000 0 0 4 &gic 0 0 0 127 4>; - }; - - sata0: sata@3200000 { - status = "disabled"; - compatible = "fsl,ls2080a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; - interrupts = <0 133 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; - dma-coherent; - }; - - sata1: sata@3210000 { - status = "disabled"; - compatible = "fsl,ls2080a-ahci"; - reg = <0x0 0x3210000 0x0 0x10000>; - interrupts = <0 136 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; - dma-coherent; - }; - - usb0: usb3@3100000 { - status = "disabled"; - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 0x4>; /* Level high type */ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - usb1: usb3@3110000 { - status = "disabled"; - compatible = "snps,dwc3"; - reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 0x4>; /* Level high type */ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; - - ccn@4000000 { - compatible = "arm,ccn-504"; - reg = <0x0 0x04000000 0x0 0x01000000>; - interrupts = <0 12 4>; - }; + cluster0_l2: l2-cache0 { + compatible = "cache"; }; - ddr1: memory-controller@1080000 { - compatible = "fsl,qoriq-memory-controller"; - reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <0 17 0x4>; - little-endian; + cluster1_l2: l2-cache1 { + compatible = "cache"; }; - ddr2: memory-controller@1090000 { - compatible = "fsl,qoriq-memory-controller"; - reg = <0x0 0x1090000 0x0 0x1000>; - interrupts = <0 18 0x4>; - little-endian; + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; }; }; + +&pcie1 { + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; + +&pcie2 { + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; + +&pcie3 { + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; + +&pcie4 { + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi new file mode 100644 index 000000000000..8b6204845973 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -0,0 +1,196 @@ +/* + * Device Tree file for Freescale LS2080A QDS Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; +}; + +&i2c0 { + status = "okay"; + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <2>; + }; +}; + +&qspi { + status = "okay"; + flash0: s25fl256s1@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; + flash2: s25fl256s1@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi new file mode 100644 index 000000000000..3737587ffb33 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -0,0 +1,151 @@ +/* + * Device Tree file for Freescale LS2080A RDB Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; + +}; + +&i2c0 { + status = "okay"; + pca9547@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi new file mode 100644 index 000000000000..abb2fff7d162 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -0,0 +1,737 @@ +/* + * Device Tree Include file for Freescale Layerscape-2080A family SoC. + * + * Copyright (C) 2016-2017, Freescale Semiconductor + * + * Abhimanyu Saini + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include + +/ { + compatible = "fsl,ls2080a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpu: cpus { + #address-cells = <1>; + #size-cells = <0>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + interrupts = <1 9 0x4>; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; + }; + + rstcr: syscon@1e60000 { + compatible = "fsl,ls2080a-rstcr", "syscon"; + reg = <0x0 0x1e60000 0x0 0x4>; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&rstcr>; + offset = <0x0>; + mask = <0x2>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ + <1 14 4>, /* Physical Non-Secure PPI, active-low */ + <1 11 4>, /* Virtual PPI, active-low */ + <1 10 4>; /* Hypervisor PPI, active-low */ + fsl,erratum-a008585; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1300000 { + compatible = "fsl,ls2080a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dcfg: dcfg@1e00000 { + compatible = "fsl,ls2080a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 4>; + + trips { + cpu_alert: cpu-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu6 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + serial0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + serial1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster3_core0_watchdog: wdt@c200000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc200000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster3_core1_watchdog: wdt@c210000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc210000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster4_core0_watchdog: wdt@c300000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc300000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster4_core1_watchdog: wdt@c310000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc310000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + /* + * Define the maximum number of MACs present on the SoC. + */ + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + + dpmac11: dpmac@b { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xb>; + }; + + dpmac12: dpmac@c { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xc>; + }; + + dpmac13: dpmac@d { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xd>; + }; + + dpmac14: dpmac@e { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xe>; + }; + + dpmac15: dpmac@f { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xf>; + }; + + dpmac16: dpmac@10 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x10>; + }; + }; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <12>; + interrupts = <0 13 4>, /* global secure fault */ + <0 14 4>, /* combined secure interrupt */ + <0 15 4>, /* global non-secure fault */ + <0 16 4>, /* combined non-secure interrupt */ + /* performance counter interrupts 0-7 */ + <0 211 4>, <0 212 4>, + <0 213 4>, <0 214 4>, + <0 215 4>, <0 216 4>, + <0 217 4>, <0 218 4>, + /* per context interrupt, 64 interrupts */ + <0 146 4>, <0 147 4>, + <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, + <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, + <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, + <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, + <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, + <0 168 4>, <0 169 4>, + <0 170 4>, <0 171 4>, + <0 172 4>, <0 173 4>, + <0 174 4>, <0 175 4>, + <0 176 4>, <0 177 4>, + <0 178 4>, <0 179 4>, + <0 180 4>, <0 181 4>, + <0 182 4>, <0 183 4>, + <0 184 4>, <0 185 4>, + <0 186 4>, <0 187 4>, + <0 188 4>, <0 189 4>, + <0 190 4>, <0 191 4>, + <0 192 4>, <0 193 4>, + <0 194 4>, <0 195 4>, + <0 196 4>, <0 197 4>, + <0 198 4>, <0 199 4>, + <0 200 4>, <0 201 4>, + <0 202 4>, <0 203 4>, + <0 204 4>, <0 205 4>, + <0 206 4>, <0 207 4>, + <0 208 4>, <0 209 4>; + mmu-masters = <&fsl_mc 0x300 0>; + }; + + dspi: dspi@2100000 { + status = "disabled"; + compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + }; + + esdhc: esdhc@2140000 { + status = "disabled"; + compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; /* Updated by bootloader */ + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c0: i2c@2000000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c1: i2c@2010000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c2: i2c@2020000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c3: i2c@2030000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + ifc: ifc@2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + }; + + qspi: quadspi@20c0000 { + status = "disabled"; + compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; + }; + + pcie1: pcie@3400000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 108 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, + <0000 0 0 2 &gic 0 0 0 110 4>, + <0000 0 0 3 &gic 0 0 0 111 4>, + <0000 0 0 4 &gic 0 0 0 112 4>; + }; + + pcie2: pcie@3500000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 113 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, + <0000 0 0 2 &gic 0 0 0 115 4>, + <0000 0 0 3 &gic 0 0 0 116 4>, + <0000 0 0 4 &gic 0 0 0 117 4>; + }; + + pcie3: pcie@3600000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 118 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <8>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, + <0000 0 0 2 &gic 0 0 0 120 4>, + <0000 0 0 3 &gic 0 0 0 121 4>, + <0000 0 0 4 &gic 0 0 0 122 4>; + }; + + pcie4: pcie@3700000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 123 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, + <0000 0 0 2 &gic 0 0 0 125 4>, + <0000 0 0 3 &gic 0 0 0 126 4>, + <0000 0 0 4 &gic 0 0 0 127 4>; + }; + + sata0: sata@3200000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata1: sata@3210000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>; + interrupts = <0 136 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + usb0: usb3@3100000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + }; + + usb1: usb3@3110000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + }; + + ccn@4000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0x04000000 0x0 0x01000000>; + interrupts = <0 12 4>; + }; + }; + + ddr1: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <0 17 0x4>; + little-endian; + }; + + ddr2: memory-controller@1090000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1090000 0x0 0x1000>; + interrupts = <0 18 0x4>; + little-endian; + }; +}; From df72c23ea2fc62e97e8f202d77b8102eff9d296d Mon Sep 17 00:00:00 2001 From: Abhimanyu Saini Date: Wed, 1 Feb 2017 11:58:36 +0530 Subject: [PATCH 039/180] arm64: dts: freescale: ls2088a: Add DTS support for FSL's LS2088A SoC This patch adds the device tree support for FSL LS2088A SoC based on ARMv8 architecture. Following levels of DTSI/DTS files have been created for the LS2088A SoC family: - fsl-ls2088a.dtsi: DTS-Include file for FSL LS2088A SoC. - fsl-ls2088a-qds.dts: DTS file for FSL LS2088A QDS board. - fsl-ls2088a-rdb.dts: DTS file for FSL LS2088A RDB board. Signed-off-by: Priyanka Jain Signed-off-by: Ashish Kumar Signed-off-by: Abhimanyu Saini Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 2 + .../boot/dts/freescale/fsl-ls2088a-qds.dts | 64 +++++++ .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 64 +++++++ .../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 165 ++++++++++++++++++ 4 files changed, 295 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 39db645b268e..6d5df45bd705 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts new file mode 100644 index 000000000000..ebcd6ee4da0d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -0,0 +1,64 @@ +/* + * Device Tree file for Freescale LS2088A QDS Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" +#include "fsl-ls208xa-qds.dtsi" + +/ { + model = "Freescale Layerscape 2088A QDS Board"; + compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts new file mode 100644 index 000000000000..5992dc130faa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -0,0 +1,64 @@ +/* + * Device Tree file for Freescale LS2088A RDB Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" +#include "fsl-ls208xa-rdb.dtsi" + +/ { + model = "Freescale Layerscape 2088A RDB Board"; + compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi new file mode 100644 index 000000000000..33ce404cf7e4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -0,0 +1,165 @@ +/* + * Device Tree Include file for Freescale Layerscape-2088A family SoC. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "fsl-ls208xa.dtsi" + +&cpu { + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + }; + + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; + }; + + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + }; + + cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; + }; + + cpu7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; +}; + +&pcie1 { + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; +}; + +&pcie2 { + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; +}; + +&pcie3 { + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; +}; + +&pcie4 { + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; +}; From 0ed797f70567dedceb26afd01f0cafd7b785f483 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Fri, 10 Feb 2017 11:22:38 +0900 Subject: [PATCH 040/180] arm64: dts: exynos: Enable ir-spi in the TM2 and TM2E boards Add the device tree node for the ir-spi driver which enables the IR LED for remote controlling. This patch sets first the GPR3[3] gpio line as a regulator-fixed for enabling an external regulator which powers the IR LED. Removes also the default assignment of GPG3[7] related to the MOSI line of the SPI3 bus. Signed-off-by: Andi Shyti Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- .../dts/exynos/exynos5433-tm2-common.dtsi | 26 ++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 098ad557fee3..4df6b57a0a68 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -106,6 +106,13 @@ }; }; + irda_regulator: irda-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; + regulator-name = "irda_regulator"; + }; + sound { compatible = "samsung,tm2-audio"; audio-codec = <&wm5110>; @@ -1074,7 +1081,6 @@ PIN(INPUT, gpg3-0, DOWN, FAST_SR1); PIN(INPUT, gpg3-1, DOWN, FAST_SR1); PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); }; }; @@ -1152,6 +1158,24 @@ }; }; +&spi_3 { + status = "okay"; + no-cs-readback; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&irda_regulator>; + duty-cycle = <60>; + led-active-low; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + &timer { clock-frequency = <24000000>; }; From 2b17d2f8bc55e0abe5f03fda065d73cfcf465e5c Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Fri, 10 Feb 2017 11:17:21 +0900 Subject: [PATCH 041/180] arm64: dts: exynos: Add stmfts touchscreen node for TM2 and TM2E TM2 and TM2E devices are provided with a ST-Microelectronics Finger Tip S device with small differences: - screen size - TM2E uses the stmfts also as a touchkey for "back" and "menu" In this commit the initial value of the interrupt line is set to EXYNOS_PIN_PULL_UP as the interrupt is triggered when the line goes down. Signed-off-by: Andi Shyti Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 15 ++++++++++++++- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 5 +++++ arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 7 +++++++ 3 files changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 4df6b57a0a68..fef0ba77f7f7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -756,6 +756,19 @@ }; }; +&hsi2c_5 { + status = "okay"; + + stmfts: touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + }; +}; + &hsi2c_7 { status = "okay"; @@ -901,7 +914,7 @@ PIN(INPUT, gpa0-7, NONE, FAST_SR1); PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-1, UP, FAST_SR1); PIN(INPUT, gpa1-2, NONE, FAST_SR1); PIN(INPUT, gpa1-3, DOWN, FAST_SR1); PIN(INPUT, gpa1-4, DOWN, FAST_SR1); diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dea0a6f5bc18..75274b3afbd3 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -76,3 +76,8 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + +&stmfts { + touchscreen-size-x = <1439>; + touchscreen-size-y = <2559>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 7891a31adc17..694717ade927 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -63,3 +63,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + +&stmfts { + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + ledvdd-supply = <&ldo33_reg>; +}; From 5be7ade3020490b891fcdef1c92ca28fa0983ab7 Mon Sep 17 00:00:00 2001 From: Hyungwon Hwang Date: Wed, 8 Mar 2017 10:42:37 +0900 Subject: [PATCH 042/180] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board This patch add the panel device tree node for S6E3HA2 display controller to TM2 dts. Signed-off-by: Hyungwon Hwang Signed-off-by: Andrzej Hajda Signed-off-by: Chanwoo Choi Signed-off-by: Hoegeun Kwon Tested-by: Chanwoo Choi Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 75274b3afbd3..3ff95277a8ec 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -52,6 +52,18 @@ assigned-clock-rates = <250000000>, <400000000>; }; +&dsi { + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_9 { status = "okay"; From e3c07546747cdec07ff15c984bc6cebc9c9f788c Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Wed, 8 Mar 2017 13:54:08 +0900 Subject: [PATCH 043/180] arm64: dts: exynos: Add the burst and esc clock frequency properties to DSI node Add the burst and esc clock frequency properties to the parent (DSI node). Currently the clock is parsed from the port node, while it should be taken from the dsi node. Signed-off-by: Hoegeun Kwon Reviewed-by: Andrzej Hajda Reviewed-by: Andi Shyti Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index fef0ba77f7f7..e2b0da2c0bc7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -305,6 +305,8 @@ status = "okay"; vddcore-supply = <&ldo6_reg>; vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; samsung,pll-clock-frequency = <24000000>; pinctrl-names = "default"; pinctrl-0 = <&te_irq>; From bbedcf586534189b334d3213794c8519574c8e43 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Mon, 20 Feb 2017 18:38:50 +0100 Subject: [PATCH 044/180] arm64: dts: marvell: add RTC description for Armada 7K/8K This RTC IP is found in the CP110 master and slave which are part of the Armada 8K SoCs and of the subset family the Armada 7K. There is one RTC in each CP but the RTC requires an external oscillator. However on the Armada 80x0, the RTC clock in CP master is not connected (by package) to the oscillator. So this one is disabled for the Armada 8020 and the Armada 8040. As the RTC clock in CP slave is connected to the oscillator this one is let enabled. and will be used on these SoCs (80x0). Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-8020.dtsi | 10 ++++++++++ arch/arm64/boot/dts/marvell/armada-8040.dtsi | 9 +++++++++ arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 7 +++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 7 +++++++ 4 files changed, 33 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 048e5cf5160e..7c08f1f28d9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -54,3 +54,13 @@ compatible = "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806"; }; + +/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock + * in CP master is not connected (by package) to the oscillator. So + * disable it. However, the RTC clock in CP slave is connected to the + * oscillator so this one is let enabled. + */ + +&cpm_rtc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 9c1b28c47683..33813a75bc30 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -54,3 +54,12 @@ compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; }; + +/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock + * in CP master is not connected (by package) to the oscillator. So + * disable it. However, the RTC clock in CP slave is connected to the + * oscillator so this one is let enabled. + */ +&cpm_rtc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 3a99c36433d6..d12741414009 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -79,6 +79,13 @@ "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; }; + cpm_rtc: rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = ; + }; + cpm_sata0: sata@540000 { compatible = "marvell,armada-8k-ahci", "generic-ahci"; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 9e09c4d3b6bd..d51eb2db6df7 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -59,6 +59,13 @@ interrupt-parent = <&gic>; ranges = <0x0 0x0 0xf4000000 0x2000000>; + cps_rtc: rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = ; + }; + cps_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon"; From 0ddd48de1e844ec5e0f3e3cc8622d85e00edbe35 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 22 Feb 2017 18:31:44 +0100 Subject: [PATCH 045/180] ARM64: dts: marvell: armada37xx: add address and size property for i2c cells These property were missing when the nodes were added and their lack generate warning messages when adding i2c device in the subnodes. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index b48d668a6ab6..cf0c2f9ebd7d 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -112,6 +112,8 @@ i2c0: i2c@11000 { compatible = "marvell,armada-3700-i2c"; reg = <0x11000 0x24>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&nb_periph_clk 10>; interrupts = ; mrvl,i2c-fast-mode; @@ -121,6 +123,8 @@ i2c1: i2c@11080 { compatible = "marvell,armada-3700-i2c"; reg = <0x11080 0x24>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&nb_periph_clk 9>; interrupts = ; mrvl,i2c-fast-mode; From a844a652e7f2b6e44b5e69c6874c8e2ad2d2f5e6 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 22 Feb 2017 18:31:45 +0100 Subject: [PATCH 046/180] ARM64: dts: marvell: armada-3720-db: add gpio expander A gpio expander is present on the i2c bus on the Armada 3720 DB board. This patch add it to the device tree. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 86602c907a61..864936acc316 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -64,6 +64,24 @@ &i2c0 { status = "okay"; + + gpio_exp: pca9555@22 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0x22>; + /* + * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT + * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE + * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN + * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN + * IO0_4: PWR_EN_SD + * IO0_5: PWR_EN_EMMC + * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL + * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS + */ + }; }; /* CON3 */ From 73bf90d4d4e388a59f656e14fbc240de8fe8f728 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:43 +0100 Subject: [PATCH 047/180] arm64: tegra: Add PMC controller on Tegra186 The NVIDIA Tegra186 SoC has a Power Management Controller that performs various tasks related to system power, boot as well as suspend/resume. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 62fa85ae0271..d6955bb46ae0 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -307,6 +307,15 @@ #interrupt-cells = <2>; }; + pmc@c360000 { + compatible = "nvidia,tegra186-pmc"; + reg = <0 0x0c360000 0 0x10000>, + <0 0x0c370000 0 0x10000>, + <0 0x0c380000 0 0x10000>, + <0 0x0c390000 0 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + }; + sysram@30000000 { compatible = "nvidia,tegra186-sysram", "mmio-sram"; reg = <0x0 0x30000000 0x0 0x50000>; From 0caafbde07ec36bc34b4746017a6c0ce4d22ab0b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:44 +0100 Subject: [PATCH 048/180] arm64: tegra: Add ethernet support for Tegra186 The NVIDIA Tegra186 SoC contains an instance of the Synopsys DWC ethernet QOS IP block, which supports 10, 100 and 1000 Mbps data transfer rates. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 31 ++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index d6955bb46ae0..3ea5e6369bc3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -27,6 +27,37 @@ gpio-controller; }; + ethernet@2490000 { + compatible = "nvidia,tegra186-eqos", + "snps,dwc-qos-ethernet-4.10"; + reg = <0x0 0x02490000 0x0 0x10000>; + interrupts = , /* common */ + , /* power */ + , /* rx0 */ + , /* tx0 */ + , /* rx1 */ + , /* tx1 */ + , /* rx2 */ + , /* tx2 */ + , /* rx3 */ + ; /* tx3 */ + clocks = <&bpmp TEGRA186_CLK_AXI_CBB>, + <&bpmp TEGRA186_CLK_EQOS_AXI>, + <&bpmp TEGRA186_CLK_EQOS_RX>, + <&bpmp TEGRA186_CLK_EQOS_TX>, + <&bpmp TEGRA186_CLK_EQOS_PTP_REF>; + clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; + resets = <&bpmp TEGRA186_RESET_EQOS>; + reset-names = "eqos"; + status = "disabled"; + + snps,write-requests = <1>; + snps,read-requests = <3>; + snps,burst-map = <0x7>; + snps,txpbl = <32>; + snps,rxpbl = <8>; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; reg = <0x0 0x03100000 0x0 0x40>; From 93dbb44c5c2678aaed08c096968ffd4fb171e154 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:45 +0100 Subject: [PATCH 049/180] arm64: tegra: Invert the PMC interrupt on P3310 The PMC interrupt is inverted on P3310, so mark it as such in the device tree to avoid a flood of interrupts when the PMIC is enabled. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 1abe2eceb3d1..3653d0dd5f4f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -26,6 +26,10 @@ status = "okay"; }; + pmc@c360000 { + nvidia,invert-interrupt; + }; + cpus { cpu@0 { enable-method = "psci"; From a4c7aab2eaaeb479ae18a8299c69e8d28b50591b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:46 +0100 Subject: [PATCH 050/180] arm64: tegra: Enable I2C controllers on P3310 The P3310 processor modules use seven I2C controllers for various peripherals. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 40 ++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 3653d0dd5f4f..762f4756346c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -6,6 +6,14 @@ aliases { serial0 = &uarta; + i2c0 = "/bpmp/i2c"; + i2c1 = "/i2c@3160000"; + i2c2 = "/i2c@c240000"; + i2c3 = "/i2c@3180000"; + i2c4 = "/i2c@3190000"; + i2c5 = "/i2c@31c0000"; + i2c6 = "/i2c@c250000"; + i2c7 = "/i2c@31e0000"; }; chosen { @@ -22,10 +30,38 @@ status = "okay"; }; + i2c@3160000 { + status = "okay"; + }; + + i2c@3180000 { + status = "okay"; + }; + + i2c@3190000 { + status = "okay"; + }; + + i2c@31c0000 { + status = "okay"; + }; + + i2c@31e0000 { + status = "okay"; + }; + hsp@3c00000 { status = "okay"; }; + i2c@c240000 { + status = "okay"; + }; + + i2c@c250000 { + status = "okay"; + }; + pmc@c360000 { nvidia,invert-interrupt; }; @@ -57,7 +93,9 @@ }; bpmp { - status = "okay"; + i2c { + status = "okay"; + }; }; psci { From 24975b8c218ad7206f98062c97c9380c2163f6e2 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:47 +0100 Subject: [PATCH 051/180] arm64: tegra: Enable ethernet on P3310 The P3310 processor module provides networking via the ethernet controller found on NVIDIA Tegra186 SoCs. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 762f4756346c..ffbb4be5122e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -26,6 +26,26 @@ reg = <0x0 0x80000000 0x2 0x00000000>; }; + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = ; + }; + }; + }; + serial@3100000 { status = "okay"; }; From 85f1dfae159cc3a5f1edc5851fae16126a9d6cee Mon Sep 17 00:00:00 2001 From: Tang Yuantian Date: Thu, 9 Feb 2017 14:29:14 +0800 Subject: [PATCH 052/180] arm64: dts: added ecc register address to sata node on ls1043a For ls1043 sata, ecc should be disabled due to a erratum. Provide the ecc register address for driver to use. Signed-off-by: Tang Yuantian Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ec13a6ecb754..45cface08cbb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -582,7 +582,9 @@ sata: sata@3200000 { compatible = "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 0x4>; clocks = <&clockgen 4 0>; dma-coherent; From c8cc48acb25cc951401b48f3ba778ea960a6ecfc Mon Sep 17 00:00:00 2001 From: Tang Yuantian Date: Thu, 9 Feb 2017 14:29:15 +0800 Subject: [PATCH 053/180] arm64: dts: added ecc register address to sata node on ls1046a For ls1046 sata, ecc should be disabled due to a erratum. Provide the ecc register address for driver to use. Signed-off-by: Tang Yuantian Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 4a164b801882..f4b8b7edaf9d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -587,7 +587,9 @@ sata: sata@3200000 { compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = ; clocks = <&clockgen 4 1>; }; From 7328be4a03b10c19e49a564f4c2e3a9ebcf34ca7 Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Tue, 7 Mar 2017 19:03:22 +0100 Subject: [PATCH 054/180] arm64: dts: r8a7796: Add Cortex-A57 CPU cores This patch adds Cortex-A57 CPU cores to R8A7796 SoC for a total of 2 x Cortex-A57. Signed-off-by: Takeshi Kihara [geert: Rebased] Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 27f7dd9bd988..d2a2110fc7fc 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -37,7 +37,6 @@ #address-cells = <1>; #size-cells = <0>; - /* 1 core only at this point */ a57_0: cpu@0 { compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; @@ -47,6 +46,15 @@ enable-method = "psci"; }; + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + L2_CA57: cache-controller-0 { compatible = "cache"; power-domains = <&sysc R8A7796_PD_CA57_SCU>; @@ -100,7 +108,7 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = ; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -109,13 +117,13 @@ timer { compatible = "arm,armv8-timer"; interrupts = , + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, , + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, , + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, ; + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; }; wdt0: watchdog@e6020000 { From 9fccf4d6103eeb5db88c1ae026d61b87f722414a Mon Sep 17 00:00:00 2001 From: Takeshi Kihara Date: Tue, 7 Mar 2017 19:03:23 +0100 Subject: [PATCH 055/180] arm64: dts: r8a7796: Add Cortex-A57 PMU node Enable the performance monitor unit for the Cortex-A57 cores on the R8A7796 SoC. Signed-off-by: Takeshi Kihara Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index d2a2110fc7fc..454e1292f910 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -252,6 +252,14 @@ reg = <0 0xe6060000 0 0x50c>; }; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts = , + ; + interrupt-affinity = <&a57_0>, + <&a57_1>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7796-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; From a681e6d63285b879bb9bab0bd79e2021e6dcbda1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 7 Mar 2017 19:03:24 +0100 Subject: [PATCH 056/180] arm64: dts: r8a7796: Add CA53 L2 cache-controller node Add a device node for the Cortex-A53 L2 cache-controller. The L2 cache for the Cortex-A53 CPU cores is 512 KiB large (organized as 32 KiB x 16 ways). Extracted from a patch by Takeshi Kihara in the BSP. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 454e1292f910..b951f5ffe9e0 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -61,6 +61,13 @@ cache-unified; cache-level = <2>; }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A7796_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; }; extal_clk: extal { From b4dc3b4b1a65fec829ee8704c7647c06a8038108 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 7 Mar 2017 19:03:25 +0100 Subject: [PATCH 057/180] arm64: dts: r8a7796: Add Cortex-A53 CPU cores This patch adds Cortex-A53 CPU cores of R8A7796 SoC, and sets a total of 6 cores (2 x Cortex-A57 + 4 x Cortex-A53). Based on a patch by Takeshi Kihara in the BSP. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 46 +++++++++++++++++++++--- 1 file changed, 41 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index b951f5ffe9e0..b32a180009dd 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -55,6 +55,42 @@ enable-method = "psci"; }; + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + L2_CA57: cache-controller-0 { compatible = "cache"; power-domains = <&sysc R8A7796_PD_CA57_SCU>; @@ -115,7 +151,7 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = ; + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -124,13 +160,13 @@ timer { compatible = "arm,armv8-timer"; interrupts = , + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, , + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, , + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, ; + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; }; wdt0: watchdog@e6020000 { From ccc499330dbcaa8f6065bd1b10a64ca09fa96c3e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 7 Mar 2017 19:03:26 +0100 Subject: [PATCH 058/180] arm64: dts: r8a7796: Add Cortex-A53 PMU node Enable the performance monitor unit for the Cortex-A53 cores on the R8A7796 SoC. Extracted from a patch by Takeshi Kihara in the BSP. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index b32a180009dd..a90abf14dc4e 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -303,6 +303,18 @@ <&a57_1>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7796-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; From 02df3f03a8db3e64348b8fce3d8ce2449ada3fa6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:48 +0100 Subject: [PATCH 059/180] arm64: tegra: Add initial power tree for P3310 Enable the Maxim MAX77620 PMIC found on P3310 and add some fixed regulators to model the power tree. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 220 ++++++++++++++++++ 1 file changed, 220 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index ffbb4be5122e..9eba6daac1a4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -1,5 +1,7 @@ #include "tegra186.dtsi" +#include + / { model = "NVIDIA Tegra186 P3310 Processor Module"; compatible = "nvidia,p3310", "nvidia,tegra186"; @@ -115,6 +117,189 @@ bpmp { i2c { status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = ; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = ; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = ; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio5 { + pins = "gpio5"; + function = "gpio"; + drive-push-pull = <0>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = ; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = ; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps2 { + maxim,fps-event-source = ; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_1v8>; + in-ldo7-8-supply = <&avdd_dsi_csi>; + + sd0 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + avdd_dsi_csi: sd1 { + regulator-name = "AVDD_DSI_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: sd2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: sd3 { + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_1V8_AP_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDDIO_3V3_AOHV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vddio_sdmmc1: ldo3 { + regulator-name = "VDDIO_SDMMC1_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vddio_sdmmc3: ldo5 { + regulator-name = "VDDIO_SDMMC3_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + avdd_1v05: ldo7 { + regulator-name = "VDD_HDMI_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vdd_pex: ldo8 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; }; @@ -123,4 +308,39 @@ status = "okay"; method = "smc"; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_ap: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + + regulator-name = "VDD_1V8_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* XXX */ + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_1v8>; + }; + }; }; From 80fdf7b426f1c37571b68a4494fb72a7a73a31fd Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:49 +0100 Subject: [PATCH 060/180] arm64: tegra: Enable SDHCI controllers on P3110 The P3110 processor module wires one of the SDHCI controllers to an on- board eMMC and exposes another set of SD/MMC signals on the connector to support an external SD/MMC card. A third controller is connected to the SDIO pins of an M.2 KEY E connector. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 9eba6daac1a4..5a49093d5ce7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -7,6 +7,8 @@ compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { + sdhci0 = "/sdhci@3460000"; + sdhci1 = "/sdhci@3400000"; serial0 = &uarta; i2c0 = "/bpmp/i2c"; i2c1 = "/i2c@3160000"; @@ -72,6 +74,29 @@ status = "okay"; }; + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { + cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_LOW>; + + vqmmc-supply = <&vddio_sdmmc1>; + }; + + /* SDMMC3 (SDIO) */ + sdhci@3440000 { + status = "okay"; + }; + + /* SDMMC4 (eMMC) */ + sdhci@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8_ap>; + vmmc-supply = <&vdd_3v3_sys>; + }; + hsp@3c00000 { status = "okay"; }; From b0ddea853919e6165d58b68dc086ad575112965b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 8 Mar 2017 14:31:45 +0100 Subject: [PATCH 061/180] arm64: tegra: Enable SD/MMC slot on P2771 The P3310 processor module makes provisions for exposing the SDMMC1 controller via a standard SD/MMC slot, which the P2771 supports. Hook up the power supply provided on the P2771 carrier board and enable the device tree node. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../boot/dts/nvidia/tegra186-p2771-0000.dts | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 0d3c0996d832..b80c1c3483db 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -5,4 +5,27 @@ / { model = "NVIDIA Tegra186 P2771-0000 Development Board"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { + status = "okay"; + + vmmc-supply = <&vdd_sd>; + }; + + regulators { + vdd_sd: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + + regulator-name = "SD_CARD_SW_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_3v3_sys>; + }; + }; }; From b64994d18fcdb7ad5a1eedf291a0e95a44344e17 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:50 +0100 Subject: [PATCH 062/180] arm64: tegra: Enable current monitors on P3310 The P3310 processor module contains two current monitors that can be used to determine the current flow across various parts of the board design. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 5a49093d5ce7..cf84d7046ad5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -56,6 +56,16 @@ i2c@3160000 { status = "okay"; + + power-monitor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + }; + + power-monitor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + }; }; i2c@3180000 { From 59686a92782c38e0f8bd603fcfef3c6b5f307c97 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:51 +0100 Subject: [PATCH 063/180] arm64: tegra: Add GPIO keys on P2771 The P2771 has three keys (power, volume up and volume down) that are connected to pins on the AON GPIO controller. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../boot/dts/nvidia/tegra186-p2771-0000.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index b80c1c3483db..9a1d02228652 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -1,5 +1,7 @@ /dts-v1/; +#include + #include "tegra186-p3310.dtsi" / { @@ -13,6 +15,38 @@ vmmc-supply = <&vdd_sd>; }; + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1) + GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <10>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2) + GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <10>; + }; + }; + regulators { vdd_sd: regulator@100 { compatible = "regulator-fixed"; From b693b3d709c855a4f4a4dc5d2ac75ca794e0fa5e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:52 +0100 Subject: [PATCH 064/180] arm64: tegra: Add power monitors on P2771 The P2771 development board comes with two power monitors that can be used to determine power consumption in different parts of the board. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 9a1d02228652..78442ea81260 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -8,6 +8,18 @@ model = "NVIDIA Tegra186 P2771-0000 Development Board"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + i2c@3160000 { + power-monitor@42 { + compatible = "ti,ina3221"; + reg = <0x42>; + }; + + power-monitor@43 { + compatible = "ti,ina3221"; + reg = <0x43>; + }; + }; + /* SDMMC1 (SD/MMC) */ sdhci@3400000 { status = "okay"; From b27d5250062ef7438f86d8ab6d0549dc912f4267 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 23 Feb 2017 18:30:53 +0100 Subject: [PATCH 065/180] arm64: tegra: Add GPIO expanders on P2771 The P2771 development board expands the number of GPIOs via two I2C chips. Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- .../boot/dts/nvidia/tegra186-p2771-0000.dts | 22 +++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 78442ea81260..8daadadec63a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -18,6 +18,28 @@ compatible = "ti,ina3221"; reg = <0x43>; }; + + exp1: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + + interrupt-parent = <&gpio>; + interrupts = ; + + #gpio-cells = <2>; + gpio-controller; + }; + + exp2: gpio@77 { + compatible = "ti,tca9539"; + reg = <0x77>; + + interrupt-parent = <&gpio>; + interrupts = ; + + #gpio-cells = <2>; + gpio-controller; + }; }; /* SDMMC1 (SD/MMC) */ From f370f48d7f4f2acbcf88966e660ffc26c5dd8c7f Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Sat, 4 Mar 2017 21:26:23 +0100 Subject: [PATCH 066/180] dt-bindings: amlogic: Add HwaCom board Signed-off-by: Carlo Caione Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/arm/amlogic.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index c246cd2730d9..b3241a6802f6 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -45,6 +45,7 @@ Board compatible values: - "amlogic,p212" (Meson gxl s905x) - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "hwacom,amazetv" (Meson gxl s905x) - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) From 6e18675e107251d5b1998cea6c6e1875a8ef2de8 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Sat, 4 Mar 2017 21:26:24 +0100 Subject: [PATCH 067/180] ARM64: dts: meson-gxl: Add support for HwaCom AmazeTV This patch adds support for the HwaCom AmazeTV set-top-box. The hardware configuration is really similar to the other GXL boards but for this hardware we need to limit the max-frequency of the eMMC to have it working. Acked-by: Rob Herring Signed-off-by: Carlo Caione Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../meson-gxl-s905x-hwacom-amazetv.dts | 164 ++++++++++++++++++ 2 files changed, 165 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 3f94bce33b7f..99ddfc8087d1 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts new file mode 100644 index 000000000000..2a5804ce7f4b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2017 Carlo Caione + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Hwacom AmazeTV (S905X)"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; From b9f2fc38115344fa8c8631c7257948f4de0eec73 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 11 Mar 2017 22:58:59 +0900 Subject: [PATCH 068/180] arm64: dts: uniphier: move memory node below aliases node These UniPhier DT files are fine as long as they are compiled in the Linux build system. It is true that Linux is the biggest user of DT, but DT is project neutral from its concept. DT files are often re-used for other projects. Especially for the UniPhier platform, these DT files are re-used for U-Boot as well. If I feed these DT files to the FDTGREP tool in U-Boot, it complains about the node order. FDTGREP spl/u-boot-spl.dtb Error at 'fdt_find_regions': FDT_ERR_BADLAYOUT /aliases node must come before all other nodes Given that DT is not very sensitive to the order of nodes, this is a problem of FDTGREP. I filed a bug report a year ago, but it has not been fixed yet. Differentiating DT is painful. So, I am up-streaming the requirement from the down-stream project. Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 10 +++++----- arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 1b96e243e1e3..0173e93ab141 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier LD11 Reference Board"; compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11"; - memory@80000000 { - device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -73,6 +68,11 @@ i2c4 = &i2c4; i2c5 = &i2c5; }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; }; ðsc { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 8cb0f1130b1b..fca4c479b469 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier LD20 Reference Board"; compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; - memory@80000000 { - device_type = "memory"; - reg = <0 0x80000000 0 0xc0000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -73,6 +68,11 @@ i2c4 = &i2c4; i2c5 = &i2c5; }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0xc0000000>; + }; }; ðsc { From 9c0a9700a185156e952a23ecca592a2f0682012a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 12 Mar 2017 00:38:05 +0900 Subject: [PATCH 069/180] arm64: dts: uniphier: add pinctrl property to eMMC node for LD11/LD20 Now everything is ready to enable this pinctrl. Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 2 ++ arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 2ed35e39daec..4b54b5677837 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -304,6 +304,8 @@ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; bus-width = <8>; mmc-ddr-1_8v; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 96c053f1911e..6193f11acb78 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -378,6 +378,8 @@ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; bus-width = <8>; mmc-ddr-1_8v; From 7a201e31422b208cfedd15c08e9b0442871e2d97 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 12 Mar 2017 23:58:17 +0900 Subject: [PATCH 070/180] arm64: dts: uniphier: re-order reset deassertion of USB of LD11 Deassert the bit in the System Control block before the MIO block. Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 4b54b5677837..151c043b4835 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -320,7 +320,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; }; usb1: usb@5a810100 { @@ -331,7 +332,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; }; usb2: usb@5a820100 { @@ -342,7 +344,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; }; mioctrl@5b3e0000 { From c9060f50d82fc9b548571a9adea9ebff22b3347b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 10 Mar 2017 14:19:13 +0100 Subject: [PATCH 071/180] arm64: dts: h3ulcb: Drop superfluous status update for frequency override The scif_clk device node is already enabled in r8a7795.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index 69c623faf80c..ab352159de65 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -228,7 +228,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &i2c2 { From 971939d1da07c7b55d35aca31288cce297731c71 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 10 Mar 2017 14:19:14 +0100 Subject: [PATCH 072/180] arm64: dts: r8a7795: salvator-x: Drop superfluous status updates for frequency overrides The scif_clk and pcie_bus_clk device nodes are already enabled in r8a7795.dtsi, so there is no need to update their statuses again. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 277ab8484e0c..f25241921067 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -362,7 +362,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &i2c2 { @@ -574,7 +573,6 @@ &pcie_bus_clk { clock-frequency = <100000000>; - status = "okay"; }; &pciec0 { From cb4de4ece41a55ba125e6e8d1fa727457132dc41 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 10 Mar 2017 14:19:15 +0100 Subject: [PATCH 073/180] arm64: dts: m3ulcb: Drop superfluous status update for frequency override The scif_clk device node is already enabled in r8a7796.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index c3f064ac2cb4..372b2a944716 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -180,7 +180,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &wdt0 { From 3cbe33367d4fd480a92fbc131a96fa925be9e95d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 10 Mar 2017 14:19:16 +0100 Subject: [PATCH 074/180] arm64: dts: r8a7796: salvator-x: Drop superfluous status update for frequency override The scif_clk device node is already enabled in r8a7796.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 74b8c653c9fe..c9f59b6ce33f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -250,7 +250,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &i2c2 { From 427700a7ca54a2d7f83456d4299778ccf97a4722 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Tue, 14 Mar 2017 10:29:34 +0800 Subject: [PATCH 075/180] arm64: dts: updated sata node on ls1012a platform Updated sata node to add ecc register address and dma coherence property. Enable sata on ls1012a platforms as well. Signed-off-by: Tang Yuantian Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 5 ++++- 4 files changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index a619f6496a4c..17fae8112e4d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -113,3 +113,7 @@ &sai2 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 14a67f1709e7..e2a93d53d3d8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -126,3 +126,7 @@ &sai2 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index 62c5c7123a15..ed77f6b0937b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -57,3 +57,7 @@ &i2c0 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index cffebb4b3df1..a1c5112f1582 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -238,9 +238,12 @@ sata: sata@3200000 { compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 0>; + dma-coherent; status = "disabled"; }; }; From 9ded9b0fa8dc3d039ded0f5a0bdc3f82eb4b9259 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 4 Mar 2017 10:52:13 +0100 Subject: [PATCH 076/180] ARM64: dts: meson-gxl: improve support for the P212 reference design The Amlogic P212 reference design is used by other devices as well, such as (for example) the Khadas VIM boards. Thus this patch adds and moves all common entries from meson-gxl-s905x-p212.dts to a new, separate meson-gxl-s905x-p212.dtsi (which can be re-used on boards such as the Khadas VIM). Support for all boards based on the P212 reference design includes: - enabling IR support - enabling the SAR ADC (SARADC_CH1 is connected to a resistor which indicates the hardware revision, a similar design is found on the Khadas VIM boards) - all MMC controllers (which means that SDIO wifi, the SD card and the eMMC are now supported) - pwm_ef as dependency for the SDIO wifi modules - uart_A which is connected to the bluetooth module (the bluetooth module itself is not enabled yet due to missing devicetree bindings for the Broadcom serial bluetooth devices) - uart_AO is moved to the .dtsi (as all known devices use it as their boot-console) Specific to the P212 board: - this also enables the CVBS connector (which is not available on the Khadas VIM boards for example) - Realtek based SDIO wifi (instead of Broadcom which most other devices use) Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Tested-by: Kevin Hilman Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxl-s905x-p212.dts | 21 ++- .../dts/amlogic/meson-gxl-s905x-p212.dtsi | 173 ++++++++++++++++++ 2 files changed, 185 insertions(+), 9 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 9639f012b02b..db31e093f40e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -43,23 +43,26 @@ /dts-v1/; -#include "meson-gxl-s905x.dtsi" +#include "meson-gxl-s905x-p212.dtsi" / { compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; model = "Amlogic Meson GXL (S905X) P212 Development Board"; - aliases { - serial0 = &uart_AO; - }; + cvbs-connector { + compatible = "composite-video-connector"; - chosen { - stdout-path = "serial0:115200n8"; + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; }; +}; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi new file mode 100644 index 000000000000..f3eea8e89d12 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -0,0 +1,173 @@ +/* + * Copyright (c) 2016 Martin Blumenstingl . + * Based on meson-gx-p23x-q20x.dtsi: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione + * - Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/* Common DTSI for devices which are based on the P212 reference board. */ + +#include "meson-gxl-s905x.dtsi" + +/ { + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; From 231b362aec8c38a35bdbb2456c42b503ad6ce620 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Mon, 6 Mar 2017 11:29:04 -0500 Subject: [PATCH 077/180] arm64: dts: NS2: convert "ok" to "okay" Per e-mail from Sergei Shtylyov, the DT spec dictates it should be "okay" (although "ok" is also recognized). Thus, changing all "ok" to "okay" in NS2 device tree files Suggested-by: Sergei Shtylyov Signed-off-by: Jon Mason Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/ns2-svk.dts | 38 ++++++++++++------------ arch/arm64/boot/dts/broadcom/ns2-xmc.dts | 20 ++++++------- 2 files changed, 29 insertions(+), 29 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index 5ae08161649e..ec19fbf928a1 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -57,55 +57,55 @@ }; &enet { - status = "ok"; + status = "okay"; }; &pci_phy0 { - status = "ok"; + status = "okay"; }; &pci_phy1 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &pcie4 { - status = "ok"; + status = "okay"; }; &pcie8 { - status = "ok"; + status = "okay"; }; &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &uart0 { - status = "ok"; + status = "okay"; }; &uart1 { - status = "ok"; + status = "okay"; }; &uart2 { - status = "ok"; + status = "okay"; }; &uart3 { - status = "ok"; + status = "okay"; }; &ssp0 { - status = "ok"; + status = "okay"; slic@0 { compatible = "silabs,si3226x"; @@ -126,7 +126,7 @@ }; &ssp1 { - status = "ok"; + status = "okay"; at25@0 { compatible = "atmel,at25"; @@ -150,23 +150,23 @@ }; &sata_phy0 { - status = "ok"; + status = "okay"; }; &sata_phy1 { - status = "ok"; + status = "okay"; }; &sata { - status = "ok"; + status = "okay"; }; &sdio0 { - status = "ok"; + status = "okay"; }; &sdio1 { - status = "ok"; + status = "okay"; }; &nand { diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts index 99a2723cccd2..ab4ae1a32fab 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts @@ -54,15 +54,15 @@ }; &enet { - status = "ok"; + status = "okay"; }; &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &mdio_mux_iproc { @@ -122,27 +122,27 @@ }; &pci_phy0 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &pcie8 { - status = "ok"; + status = "okay"; }; &sata_phy0 { - status = "ok"; + status = "okay"; }; &sata_phy1 { - status = "ok"; + status = "okay"; }; &sata { - status = "ok"; + status = "okay"; }; &qspi { @@ -187,5 +187,5 @@ }; &uart3 { - status = "ok"; + status = "okay"; }; From 893e2aad4612096c17a51c4fbc7f3897b7e45606 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Wed, 15 Mar 2017 15:10:25 +0800 Subject: [PATCH 078/180] arm64: dts: ls1012a: add thermal monitor node There is a thermal monitoring unit on ls1012a soc which can monitor and record the temperature of cores so that appropriate actions can be taken or alarm the user when the temperature exceeds a programmed temperature threshold. Signed-off-by: Tang Yuantian Signed-off-by: Shawn Guo --- .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 77 +++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index a1c5112f1582..60b533144414 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -43,6 +43,7 @@ */ #include +#include / { compatible = "fsl,ls1012a"; @@ -127,6 +128,82 @@ clocks = <&sysclk>; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <0 33 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + big-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + i2c0: i2c@2180000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; From 24963d1becbb26e4649b752e0011dd90c378f100 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Wed, 14 Dec 2016 13:16:16 +0200 Subject: [PATCH 079/180] arm64: tegra: Enable VIC on Tegra210 Enable the VIC (Video Image Compositor) host1x unit on Tegra210 systems. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 2f832df29da8..217e5a14745c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -185,7 +185,14 @@ vic@54340000 { compatible = "nvidia,tegra210-vic"; reg = <0x0 0x54340000 0x0 0x00040000>; - status = "disabled"; + interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_VIC03>; + clock-names = "vic"; + resets = <&tegra_car 178>; + reset-names = "vic"; + + iommus = <&mc TEGRA_SWGROUP_VIC>; + power-domains = <&pd_vic>; }; nvjpg@54380000 { @@ -755,6 +762,14 @@ resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; #power-domain-cells = <0>; }; + + pd_vic: vic { + clocks = <&tegra_car TEGRA210_CLK_VIC03>; + clock-names = "vic"; + resets = <&tegra_car 178>; + reset-names = "vic"; + #power-domain-cells = <0>; + }; }; }; From 116503a62a5ab6d79397500ab37239ce088f03e3 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Wed, 14 Dec 2016 13:16:17 +0200 Subject: [PATCH 080/180] arm64: tegra: Enable IOMMU for host1x on Tegra210 The host1x driver now supports operation behind an IOMMU, so add its IOMMU domain to the device tree. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 217e5a14745c..8f26c4d4409a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -89,6 +89,8 @@ ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>; + iommus = <&mc TEGRA_SWGROUP_HC>; + dpaux1: dpaux@54040000 { compatible = "nvidia,tegra210-dpaux"; reg = <0x0 0x54040000 0x0 0x00040000>; From e9f0089b2d8a3d450b8ec02eccfb92b950110fbe Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 20 Mar 2017 17:49:21 +0900 Subject: [PATCH 081/180] arm64: dts: r8a7795: Correct SATA device size to 2MiB Update the r8a7795 SATA device node to use a 2MiB I/O space as specified in the "72. Serial-ATA" section of R-Car-Gen3-rev0.52E.pdf Signed-off-by: Magnus Damm Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 55c09f1b89c9..e58175084b57 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1209,7 +1209,7 @@ sata: sata@ee300000 { compatible = "renesas,sata-r8a7795"; - reg = <0 0xee300000 0 0x1fff>; + reg = <0 0xee300000 0 0x200000>; interrupts = ; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; From dcccc13210eff0e5be2b36548198952c5683f3db Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Mar 2017 15:07:23 +0100 Subject: [PATCH 082/180] arm64: dts: r8a7795: Add reset control properties Add properties to describe the reset topology for on-SoC devices: - Add the "#reset-cells" property to the CPG/MSSR device node, - Add resets and reset-names properties to the various device nodes. This allows to reset SoC devices using the Reset Controller API. Note that all resets added match the corresponding module clocks. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 93 ++++++++++++++++++++++++ 1 file changed, 93 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index e58175084b57..e99d6443b3e4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -204,6 +204,7 @@ clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; wdt0: watchdog@e6020000 { @@ -211,6 +212,7 @@ reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 402>; status = "disabled"; }; @@ -226,6 +228,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { @@ -240,6 +243,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { @@ -254,6 +258,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { @@ -268,6 +273,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { @@ -282,6 +288,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { @@ -296,6 +303,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { @@ -310,6 +318,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 906>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 906>; }; gpio7: gpio@e6055800 { @@ -324,6 +333,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; pmu_a57 { @@ -369,6 +379,7 @@ clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -405,6 +416,7 @@ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -436,6 +448,7 @@ clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; }; @@ -469,6 +482,7 @@ clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; }; @@ -502,6 +516,7 @@ clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; }; @@ -535,6 +550,7 @@ clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; }; @@ -568,6 +584,7 @@ clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; }; @@ -610,6 +627,7 @@ "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 812>; phy-mode = "rgmii-txid"; #address-cells = <1>; #size-cells = <0>; @@ -628,6 +646,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -643,6 +662,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -659,6 +679,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 914>; status = "disabled"; channel0 { @@ -683,6 +704,7 @@ dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 520>; status = "disabled"; }; @@ -699,6 +721,7 @@ dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 519>; status = "disabled"; }; @@ -715,6 +738,7 @@ dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 518>; status = "disabled"; }; @@ -731,6 +755,7 @@ dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 517>; status = "disabled"; }; @@ -747,6 +772,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 516>; status = "disabled"; }; @@ -762,6 +788,7 @@ dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -777,6 +804,7 @@ dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -792,6 +820,7 @@ dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 310>; status = "disabled"; }; @@ -807,6 +836,7 @@ dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -822,6 +852,7 @@ dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -837,6 +868,7 @@ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -850,6 +882,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -862,6 +895,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 931>; dmas = <&dmac1 0x91>, <&dmac1 0x90>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -877,6 +911,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 930>; dmas = <&dmac1 0x93>, <&dmac1 0x92>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -892,6 +927,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 929>; dmas = <&dmac1 0x95>, <&dmac1 0x94>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -907,6 +943,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 928>; dmas = <&dmac0 0x97>, <&dmac0 0x96>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -922,6 +959,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 927>; dmas = <&dmac0 0x99>, <&dmac0 0x98>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -937,6 +975,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 919>; dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -952,6 +991,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 918>; dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -963,6 +1003,7 @@ reg = <0 0xe6e30000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -972,6 +1013,7 @@ reg = <0 0xe6e31000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -981,6 +1023,7 @@ reg = <0 0xe6e32000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -990,6 +1033,7 @@ reg = <0 0xe6e33000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -999,6 +1043,7 @@ reg = <0 0xe6e34000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -1008,6 +1053,7 @@ reg = <0 0xe6e35000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -1017,6 +1063,7 @@ reg = <0 0xe6e36000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -1213,6 +1260,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 815>; status = "disabled"; }; @@ -1222,6 +1270,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 328>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; status = "disabled"; }; @@ -1231,6 +1280,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 327>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; status = "disabled"; }; @@ -1243,6 +1293,7 @@ interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; }; @@ -1256,6 +1307,7 @@ interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; }; @@ -1267,6 +1319,7 @@ clocks = <&cpg CPG_MOD 314>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -1277,6 +1330,7 @@ clocks = <&cpg CPG_MOD 313>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 313>; status = "disabled"; }; @@ -1287,6 +1341,7 @@ clocks = <&cpg CPG_MOD 312>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -1297,6 +1352,7 @@ clocks = <&cpg CPG_MOD 311>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -1307,6 +1363,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; #phy-cells = <0>; status = "disabled"; }; @@ -1317,6 +1374,7 @@ reg = <0 0xee0a0200 0 0x700>; clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; #phy-cells = <0>; status = "disabled"; }; @@ -1327,6 +1385,7 @@ reg = <0 0xee0c0200 0 0x700>; clocks = <&cpg CPG_MOD 701>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; #phy-cells = <0>; status = "disabled"; }; @@ -1339,6 +1398,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; }; @@ -1350,6 +1410,7 @@ phys = <&usb2_phy1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; status = "disabled"; }; @@ -1361,6 +1422,7 @@ phys = <&usb2_phy2>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; status = "disabled"; }; @@ -1372,6 +1434,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; }; @@ -1383,6 +1446,7 @@ phys = <&usb2_phy1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; status = "disabled"; }; @@ -1394,6 +1458,7 @@ phys = <&usb2_phy2>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; status = "disabled"; }; @@ -1410,6 +1475,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; }; @@ -1436,6 +1502,7 @@ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 319>; status = "disabled"; }; @@ -1462,6 +1529,7 @@ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -1471,6 +1539,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 624>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; renesas,fcp = <&fcpvb1>; }; @@ -1480,6 +1549,7 @@ reg = <0 0xfe92f000 0 0x200>; clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 606>; }; fcpf0: fcp@fe950000 { @@ -1487,6 +1557,7 @@ reg = <0 0xfe950000 0 0x200>; clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 615>; }; fcpf1: fcp@fe951000 { @@ -1494,6 +1565,7 @@ reg = <0 0xfe951000 0 0x200>; clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 614>; }; fcpf2: fcp@fe952000 { @@ -1501,6 +1573,7 @@ reg = <0 0xfe952000 0 0x200>; clocks = <&cpg CPG_MOD 613>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 613>; }; vspbd: vsp@fe960000 { @@ -1509,6 +1582,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 626>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 626>; renesas,fcp = <&fcpvb0>; }; @@ -1518,6 +1592,7 @@ reg = <0 0xfe96f000 0 0x200>; clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 607>; }; vspi0: vsp@fe9a0000 { @@ -1526,6 +1601,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 631>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 631>; renesas,fcp = <&fcpvi0>; }; @@ -1535,6 +1611,7 @@ reg = <0 0xfe9af000 0 0x200>; clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 611>; }; vspi1: vsp@fe9b0000 { @@ -1543,6 +1620,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 630>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 630>; renesas,fcp = <&fcpvi1>; }; @@ -1552,6 +1630,7 @@ reg = <0 0xfe9bf000 0 0x200>; clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 610>; }; vspi2: vsp@fe9c0000 { @@ -1560,6 +1639,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 629>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 629>; renesas,fcp = <&fcpvi2>; }; @@ -1569,6 +1649,7 @@ reg = <0 0xfe9cf000 0 0x200>; clocks = <&cpg CPG_MOD 609>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 609>; }; vspd0: vsp@fea20000 { @@ -1577,6 +1658,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 623>; renesas,fcp = <&fcpvd0>; }; @@ -1586,6 +1668,7 @@ reg = <0 0xfea27000 0 0x200>; clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 603>; }; vspd1: vsp@fea28000 { @@ -1594,6 +1677,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 622>; renesas,fcp = <&fcpvd1>; }; @@ -1603,6 +1687,7 @@ reg = <0 0xfea2f000 0 0x200>; clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 602>; }; vspd2: vsp@fea30000 { @@ -1611,6 +1696,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 621>; renesas,fcp = <&fcpvd2>; }; @@ -1620,6 +1706,7 @@ reg = <0 0xfea37000 0 0x200>; clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 601>; }; vspd3: vsp@fea38000 { @@ -1628,6 +1715,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 620>; renesas,fcp = <&fcpvd3>; }; @@ -1637,6 +1725,7 @@ reg = <0 0xfea3f000 0 0x200>; clocks = <&cpg CPG_MOD 600>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; }; fdp1@fe940000 { @@ -1645,6 +1734,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 119>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 119>; renesas,fcp = <&fcpf0>; }; @@ -1654,6 +1744,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 118>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 118>; renesas,fcp = <&fcpf1>; }; @@ -1663,6 +1754,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 117>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; renesas,fcp = <&fcpf2>; }; @@ -1722,6 +1814,7 @@ ; clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <1>; status = "okay"; }; From bec0948e810fffce38b9b886b0283a44eb025043 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Mar 2017 15:07:24 +0100 Subject: [PATCH 083/180] arm64: dts: r8a7796: Add reset control properties Add properties to describe the reset topology for on-SoC devices: - Add the "#reset-cells" property to the CPG/MSSR device node, - Add resets and reset-names properties to the various device nodes. This allows to reset SoC devices using the Reset Controller API. Note that all resets added match the corresponding module clocks. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 46 ++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index a90abf14dc4e..2ec1ed5f4991 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -155,6 +155,7 @@ clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; timer { @@ -175,6 +176,7 @@ reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 402>; status = "disabled"; }; @@ -190,6 +192,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { @@ -204,6 +207,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { @@ -218,6 +222,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { @@ -232,6 +237,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { @@ -246,6 +252,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { @@ -260,6 +267,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { @@ -274,6 +282,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 906>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 906>; }; gpio7: gpio@e6055800 { @@ -288,6 +297,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; pfc: pin-controller@e6060000 { @@ -322,6 +332,7 @@ clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -350,6 +361,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 926>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -362,6 +374,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 931>; dmas = <&dmac1 0x91>, <&dmac1 0x90>, <&dmac2 0x91>, <&dmac2 0x90>; dma-names = "tx", "rx", "tx", "rx"; @@ -378,6 +391,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 930>; dmas = <&dmac1 0x93>, <&dmac1 0x92>, <&dmac2 0x93>, <&dmac2 0x92>; dma-names = "tx", "rx", "tx", "rx"; @@ -394,6 +408,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 929>; dmas = <&dmac1 0x95>, <&dmac1 0x94>, <&dmac2 0x95>, <&dmac2 0x94>; dma-names = "tx", "rx", "tx", "rx"; @@ -410,6 +425,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 928>; dmas = <&dmac0 0x97>, <&dmac0 0x96>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -425,6 +441,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 927>; dmas = <&dmac0 0x99>, <&dmac0 0x98>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -440,6 +457,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 919>; dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -455,6 +473,7 @@ interrupts = ; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 918>; dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -473,6 +492,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -488,6 +508,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -504,6 +525,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 914>; status = "disabled"; channel0 { @@ -553,6 +575,7 @@ "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 812>; phy-mode = "rgmii-txid"; #address-cells = <1>; #size-cells = <0>; @@ -573,6 +596,7 @@ <&dmac2 0x31>, <&dmac2 0x30>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 520>; status = "disabled"; }; @@ -590,6 +614,7 @@ <&dmac2 0x33>, <&dmac2 0x32>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 519>; status = "disabled"; }; @@ -607,6 +632,7 @@ <&dmac2 0x35>, <&dmac2 0x34>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 518>; status = "disabled"; }; @@ -623,6 +649,7 @@ dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 517>; status = "disabled"; }; @@ -639,6 +666,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 516>; status = "disabled"; }; @@ -655,6 +683,7 @@ <&dmac2 0x51>, <&dmac2 0x50>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -671,6 +700,7 @@ <&dmac2 0x53>, <&dmac2 0x52>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -684,6 +714,7 @@ <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 310>; status = "disabled"; }; @@ -699,6 +730,7 @@ dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -714,6 +746,7 @@ dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -730,6 +763,7 @@ <&dmac2 0x5b>, <&dmac2 0x5a>; dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -743,6 +777,7 @@ <&dmac2 0x41>, <&dmac2 0x40>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 211>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -758,6 +793,7 @@ <&dmac2 0x43>, <&dmac2 0x42>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 210>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -772,6 +808,7 @@ dmas = <&dmac0 0x45>, <&dmac0 0x44>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 209>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -786,6 +823,7 @@ dmas = <&dmac0 0x47>, <&dmac0 0x46>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -820,6 +858,7 @@ clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; }; @@ -853,6 +892,7 @@ clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; }; @@ -886,6 +926,7 @@ clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; }; @@ -897,6 +938,7 @@ clocks = <&cpg CPG_MOD 314>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -907,6 +949,7 @@ clocks = <&cpg CPG_MOD 313>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 313>; status = "disabled"; }; @@ -917,6 +960,7 @@ clocks = <&cpg CPG_MOD 312>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -927,6 +971,7 @@ clocks = <&cpg CPG_MOD 311>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -940,6 +985,7 @@ ; clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <1>; status = "okay"; }; From 7144224f2c2b1a10c0b294423c8a74c2b280017c Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 9 Feb 2017 17:05:17 -0800 Subject: [PATCH 084/180] arm64: dts: rockchip: support dwc3 USB for rk3399 Add the dwc3 usb needed node information for rk3399. Signed-off-by: Brian Norris Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 54 ++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 8e6d1bdeb9c3..a9702c29d71a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -371,6 +371,60 @@ status = "disabled"; }; + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + status = "disabled"; + + usbdrd_dwc3_0: dwc3 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = ; + dr_mode = "otg"; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + status = "disabled"; + }; + }; + + usbdrd3_1: usb@fe900000 { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + status = "disabled"; + + usbdrd_dwc3_1: dwc3 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe900000 0x0 0x100000>; + interrupts = ; + dr_mode = "otg"; + phys = <&u2phy1_otg>; + phy-names = "usb2-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + status = "disabled"; + }; + }; + gic: interrupt-controller@fee00000 { compatible = "arm,gic-v3"; #interrupt-cells = <4>; From 70968d63a1bf52a421f930b4bc55489449168b3c Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 20 Mar 2017 16:53:41 -0700 Subject: [PATCH 085/180] dt-bindings: Document rk3399 Gru/Kevin Gru is a base dev board for a family of devices, including Kevin. Both utilize Rockchip RK3399, and they share much of their design. Signed-off-by: Brian Norris Acked-by: Rob Herring [added Samsung Chromebook Plus hint] Signed-off-by: Heiko Stuebner --- .../devicetree/bindings/arm/rockchip.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index cc4ace6397ab..d05caa6ee89d 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -56,6 +56,17 @@ Rockchip platforms device tree bindings - compatible = "google,veyron-brain-rev0", "google,veyron-brain", "google,veyron", "rockchip,rk3288"; +- Google Gru (dev-board): + Required root node properties: + - compatible = "google,gru-rev15", "google,gru-rev14", + "google,gru-rev13", "google,gru-rev12", + "google,gru-rev11", "google,gru-rev10", + "google,gru-rev9", "google,gru-rev8", + "google,gru-rev7", "google,gru-rev6", + "google,gru-rev5", "google,gru-rev4", + "google,gru-rev3", "google,gru-rev2", + "google,gru", "rockchip,rk3399"; + - Google Jaq (Haier Chromebook 11 and more): Required root node properties: - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", @@ -70,6 +81,15 @@ Rockchip platforms device tree bindings "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; +- Google Kevin (Samsung Chromebook Plus): + Required root node properties: + - compatible = "google,kevin-rev15", "google,kevin-rev14", + "google,kevin-rev13", "google,kevin-rev12", + "google,kevin-rev11", "google,kevin-rev10", + "google,kevin-rev9", "google,kevin-rev8", + "google,kevin-rev7", "google,kevin-rev6", + "google,kevin", "google,gru", "rockchip,rk3399"; + - Google Mickey (Asus Chromebit CS10): Required root node properties: - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7", From 48f4d9796d990850f6339b61eeeac9ca7fdb3695 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 20 Mar 2017 16:53:42 -0700 Subject: [PATCH 086/180] arm64: dts: rockchip: add Gru/Kevin DTS Kevin is part of a family of boards called Gru. As best as possible, the properties shared by the Gru family are placed in rk3399-gru.dtsi, while Kevin-specific bits are in rk3399-gru-kevin.dts. This does not add full support for the base Gru board. Working and tested (to some extent): * EC support -- including keyboard, battery, PWM, and probably more * UART / console * Thermal * Touchscreen * Touchpad * Digitizer (regulator still WIP) * PCIe / Wifi * Bluetooth / Webcam * SD card * eMMC * USB2 on TypeC - This works much of the time, but USB3 devices may or may not detect properly. Waiting on proper extcon support for USB3 over TypeC. - Depends on XHCI/DWC3 fixes for ARM64 that still haven't landed * Backlight Not working: * CPUFreq -- relies on special OVP support for our PWM regulator circuits * EC / extcon support -- and with it, USB3/TypeC/DP * DRM -- won't even build on ARM64, so all display, eDP, etc. is not enabled Not tested: * Audio Signed-off-by: Brian Norris [shared gru/kevin parts on a gru device] Tested-by: Enric Balletbo i Serra [with a bit of reordering] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-gru-kevin.dts | 302 ++++++ arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 964 ++++++++++++++++++ 3 files changed, 1267 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 3a862894ea44..b82f7b61ab6f 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts new file mode 100644 index 000000000000..fd24071320be --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -0,0 +1,302 @@ +/* + * Google Gru-Kevin Rev 6+ board device tree source + * + * Copyright 2016-2017 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3399-gru.dtsi" +#include + +/* + * Kevin-specific things + * + * Things in this section should use names from Kevin schematic since no + * equivalent exists in Gru schematic. If referring to signals that exist + * in Gru we use the Gru names, though. Confusing enough for you? + */ +/ { + model = "Google Kevin"; + compatible = "google,kevin-rev15", "google,kevin-rev14", + "google,kevin-rev13", "google,kevin-rev12", + "google,kevin-rev11", "google,kevin-rev10", + "google,kevin-rev9", "google,kevin-rev8", + "google,kevin-rev7", "google,kevin-rev6", + "google,kevin", "google,gru", "rockchip,rk3399"; + + /* Power tree */ + + p3_3v_dig: p3-3v-dig { + compatible = "regulator-fixed"; + regulator-name = "p3.3v_dig"; + pinctrl-names = "default"; + pinctrl-0 = <&cpu3_pen_pwr_en>; + + enable-active-high; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&cros_ec_pwm 1>; + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 22 23 24 25 26 27 28 29 30 + 31 32 33 34 35 36 37 38 39 40 41 42 43 44 + 45 46 47 48 49 50 51 52 53 54 55 56 57 58 + 59 60 61 62 63 64 65 66 67 68 69 70 71 72 + 73 74 75 76 77 78 79 80 81 82 83 84 85 86 + 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; + default-brightness-level = <51>; + enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_disp>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwm-delay-us = <10000>; + }; + + thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <25500>; + pulldown-ohm = <0>; + io-channels = <&saradc 2>; + #thermal-sensor-cells = <0>; + }; + + thermistor_ppvar_litcpu: thermistor-ppvar-litcpu { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <25500>; + pulldown-ohm = <0>; + io-channels = <&saradc 3>; + #thermal-sensor-cells = <0>; + }; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-source; + }; +}; + +&thermal_zones { + bigcpu_reg_thermal: bigcpu-reg-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermistor_ppvar_bigcpu 0>; + sustainable-power = <4000>; + + ppvar_bigcpu_trips: trips { + ppvar_bigcpu_on: ppvar-bigcpu-on { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_bigcpu_alert: ppvar-bigcpu-alert { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_bigcpu_crit: ppvar-bigcpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&ppvar_bigcpu_alert>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + map1 { + trip = <&ppvar_bigcpu_alert>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + + litcpu_reg_thermal: litcpu-reg-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermistor_ppvar_litcpu 0>; + sustainable-power = <4000>; + + ppvar_litcpu_trips: trips { + ppvar_litcpu_on: ppvar-litcpu-on { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_litcpu_alert: ppvar-litcpu-alert { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_litcpu_crit: ppvar-litcpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + }; +}; + +ap_i2c_tpm: &i2c0 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +ap_i2c_dig: &i2c2 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + digitizer: digitizer@9 { + compatible = "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>; + + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +/* Adjustments to things in the gru baseboard */ + +&ap_i2c_tp { + trackpad@4a { + compatible = "atmel,atmel_mxt_tp"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&ap_i2c_ts { + touchscreen@4b { + compatible = "atmel,atmel_mxt_ts"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&pp1800_ap_io>; +}; + +&mvl_wifi { + marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */ +}; + +&pinctrl { + digitizer { + /* Has external pullup */ + cpu1_dig_irq_l: cpu1-dig-irq-l { + rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* Has external pullup */ + cpu1_dig_pdct_l: cpu1-dig-pdct-l { + rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + discrete-regulators { + cpu3_pen_pwr_en: cpu3-pen-pwr-en { + rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pen { + cpu1_pen_eject: cpu1-pen-eject { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi new file mode 100644 index 000000000000..1a57014a7b59 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -0,0 +1,964 @@ +/* + * Google Gru (and derivatives) board device tree source + * + * Copyright 2016-2017 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include "rk3399.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + /* + * Power Tree + * + * In general an attempt is made to include all rails called out by + * the schematic as long as those rails interact in some way with + * the AP. AKA: + * - Rails that only connect to the EC (or devices that the EC talks to) + * are not included. + * - Rails _are_ included if the rails go to the AP even if the AP + * doesn't currently care about them / they are always on. The idea + * here is that it makes it easier to map to the schematic or extend + * later. + * + * If two rails are substantially the same from the AP's point of + * view, though, we won't create a full fixed regulator. We'll just + * put the child rail as an alias of the parent rail. Sometimes rails + * look the same to the AP because one of these is true: + * - The EC controls the enable and the EC always enables a rail as + * long as the AP is running. + * - The rails are actually connected to each other by a jumper and + * the distinction is just there to add clarity/flexibility to the + * schematic. + */ + + ppvar_sys: ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + pp900_ap: pp900-ap { + compatible = "regulator-fixed"; + regulator-name = "pp900_ap"; + + /* EC turns on w/ pp900_ap_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1200_lpddr: pp1200-lpddr { + compatible = "regulator-fixed"; + regulator-name = "pp1200_lpddr"; + + /* EC turns on w/ lpddr_pwr_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800: pp1800 { + compatible = "regulator-fixed"; + regulator-name = "pp1800"; + + /* Always on when ppvar_sys shows power good */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3000: pp3000 { + compatible = "regulator-fixed"; + regulator-name = "pp3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3000_en>; + + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300: pp3300 { + compatible = "regulator-fixed"; + regulator-name = "pp3300"; + + /* Always on; plain and simple */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp5000: pp5000 { + compatible = "regulator-fixed"; + regulator-name = "pp5000"; + + /* EC turns on w/ pp5000_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + /* Schematics call this PPVAR even though it's fixed */ + ppvar_logic: ppvar-logic { + compatible = "regulator-fixed"; + regulator-name = "ppvar_logic"; + + /* EC turns on w/ ppvar_logic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + /* EC turns on w/ pp900_ddrpll_en */ + pp900_ddrpll: pp900-ap { + }; + + /* EC turns on w/ pp900_pcie_en */ + pp900_pcie: pp900-ap { + }; + + /* EC turns on w/ pp900_pll_en */ + pp900_pll: pp900-ap { + }; + + /* EC turns on w/ pp900_pmu_en */ + pp900_pmu: pp900-ap { + }; + + /* EC turns on w/ pp900_usb_en */ + pp900_usb: pp900-ap { + }; + + /* EC turns on w/ pp1800_s0_en_l */ + pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { + }; + + /* EC turns on w/ pp1800_avdd_en_l */ + pp1800_avdd: pp1800 { + }; + + /* EC turns on w/ pp1800_lid_en_l */ + pp1800_lid: pp1800_mic: pp1800 { + }; + + /* EC turns on w/ lpddr_pwr_en */ + pp1800_lpddr: pp1800 { + }; + + /* EC turns on w/ pp1800_pmu_en_l */ + pp1800_pmu: pp1800 { + }; + + /* EC turns on w/ pp1800_usb_en_l */ + pp1800_usb: pp1800 { + }; + + pp1500_ap_io: pp1500-ap-io { + compatible = "regulator-fixed"; + regulator-name = "pp1500_ap_io"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1500_en>; + + enable-active-high; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&pp1800>; + }; + + pp1800_audio: pp1800-audio { + compatible = "regulator-fixed"; + regulator-name = "pp1800_audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_audio_en>; + + enable-active-high; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp1800>; + }; + + /* gpio is shared with pp3300_wifi_bt */ + pp1800_pcie: pp1800-pcie { + compatible = "regulator-fixed"; + regulator-name = "pp1800_pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_pd_l>; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Need to wait 1ms + ramp-up time before we can power on WiFi. + * This has been approximated as 8ms total. + */ + regulator-enable-ramp-delay = <8000>; + + vin-supply = <&pp1800>; + }; + + /* + * This is a bit of a hack. The WiFi module should be reset at least + * 1ms after its regulators have ramped up (max rampup time is ~7ms). + * With some stretching of the imagination, we can call the 1.8V + * regulator a supply. + */ + wlan_pd_n: wlan-pd-n { + compatible = "regulator-fixed"; + regulator-name = "wlan_pd_n"; + + /* Note the wlan_module_reset_l pinctrl */ + enable-active-high; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp1800_pcie>; + }; + + /* Always on; plain and simple */ + pp3000_ap: pp3000_emmc: pp3000 { + }; + + pp3000_sd_slot: pp3000-sd-slot { + compatible = "regulator-fixed"; + regulator-name = "pp3000_sd_slot"; + pinctrl-names = "default"; + pinctrl-0 = <&sd_slot_pwr_en>; + + enable-active-high; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3000>; + }; + + /* + * Technically, this is a small abuse of 'regulator-gpio'; this + * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are + * always on though, so it is sufficient to simply control the mux + * here. + */ + ppvar_sd_card_io: ppvar-sd-card-io { + compatible = "regulator-gpio"; + regulator-name = "ppvar_sd_card_io"; + pinctrl-names = "default"; + pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>; + + enable-active-high; + enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3000000 0x0>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + /* EC turns on w/ pp3300_trackpad_en_l */ + pp3300_trackpad: pp3300-trackpad { + }; + + /* EC turns on w/ pp3300_usb_en_l */ + pp3300_usb: pp3300 { + }; + + pp3300_disp: pp3300-disp { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_disp_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <2000>; + vin-supply = <&pp3300>; + }; + + /* gpio is shared with pp1800_pcie and pinctrl is set there */ + pp3300_wifi_bt: pp3300-wifi-bt { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wifi_bt"; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3300>; + }; + + /* EC turns on w/ usb_a_en */ + pp5000_usb_a_vbus: pp5000 { + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + }; + }; + + max98357a: max98357a { + compatible = "maxim,max98357a"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmode_en>; + sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + sdmode-delay = <2>; + #sound-dai-cells = <0>; + status = "okay"; + }; + + sound { + compatible = "rockchip,rk3399-gru-sound"; + rockchip,cpu = <&i2s0 &i2s2>; + rockchip,codec = <&max98357a &headsetcodec &codec>; + }; +}; + +&cru { + assigned-clocks = + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, + <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, + <&cru PCLK_PERIHP>, + <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; + assigned-clock-rates = + <600000000>, <800000000>, + <1000000000>, + <150000000>, <75000000>, + <37500000>, + <100000000>, <100000000>, + <50000000>, <800000000>, + <100000000>, <50000000>; +}; + +&emmc_phy { + status = "okay"; +}; + +ap_i2c_mic: &i2c1 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + headsetcodec: rt5514@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + realtek,dmic-init-delay = <20>; + wakeup-source; + }; +}; + +ap_i2c_ts: &i2c3 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; +}; + +ap_i2c_tp: &i2c5 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* + * Note strange pullup enable. Apparently this avoids leakage but + * still allows us to get nice 4.7K pullups for high speed i2c + * transfers. Basically we want the pullup on whenever the ap is + * alive, so the "en" pin just gets set to output high. + */ + pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; +}; + +ap_i2c_audio: &i2c8 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + pinctrl-names = "default"; + pinctrl-0 = <&headset_int_l>; + VDD-supply = <&pp1800>; + VDDMIC-supply = <&pp3300>; + VDDIO-supply = <&pp1800>; + + da7219_aad { + dlg,adc-1bit-rpt = <1>; + dlg,btn-avg = <4>; + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */ + bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */ + gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */ + sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */ +}; + +&pcie0 { + status = "okay"; + + ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>; + vpcie3v3-supply = <&pp3300_wifi_bt>; + vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */ + vpcie0v9-supply = <&pp900_pcie>; + + pci_rootport: pcie@0,0 { + reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + mvl_wifi: wifi@0,0 { + compatible = "pci1b4b,2b42"; + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake_l>; + wakeup-source; + }; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */ +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + /* + * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the + * same (or nearly the same) performance for all eMMC that are intended + * to be used. + */ + assigned-clock-rates = <150000000>; + + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + status = "okay"; + + /* + * Note: configure "sdmmc_cd" as card detect even though it's actually + * hooked to ground. Because we specified "cd-gpios" below dw_mmc + * should be ignoring card detect anyway. Specifying the pin as + * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag) + * turned on that the system will still make sure the port is + * configured as SDMMC and not JTAG. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio + &sdmmc_bus4>; + + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&pp3000_sd_slot>; + vqmmc-supply = <&ppvar_sd_card_io>; +}; + +&spi1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&spi1_sleep>; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + }; +}; + +&spi2 { + status = "okay"; + + wacky_spi_audio: spi2@0 { + compatible = "realtek,rt5514"; + reg = <0>; + + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + }; +}; + +&spi5 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + }; +}; + +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy0_host { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +#include +#include + +&pinctrl { + /* + * pinctrl settings for pins that have no real owners. + * + * At the moment settings are identical for S0 and S3, but if we later + * need to configure things differently for S3 we'll adjust here. + */ + pinctrl-names = "default"; + pinctrl-0 = < + &ap_pwroff /* AP will auto-assert this when in S3 */ + &clk_32k /* This pin is always 32k on gru boards */ + + /* + * We want this driven low ASAP; firmware should help us, but + * we can help ourselves too. + */ + &wlan_module_reset_l + >; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + backlight-enable { + bl_en: bl-en { + rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cros-ec { + ec_ap_int_l: ec-ap-int-l { + rockchip,pins = ; + }; + }; + + discrete-regulators { + pp1500_en: pp1500-en { + rockchip,pins = ; + }; + + pp1800_audio_en: pp1800-audio-en { + rockchip,pins = ; + }; + + pp3300_disp_en: pp3300-disp-en { + rockchip,pins = ; + }; + + pp3000_en: pp3000-en { + rockchip,pins = ; + }; + + sd_io_pwr_en: sd-io-pwr-en { + rockchip,pins = ; + }; + + sd_pwr_1800_sel: sd-pwr-1800-sel { + rockchip,pins = ; + }; + + sd_slot_pwr_en: sd-slot-pwr-en { + rockchip,pins = ; + }; + + wlan_module_pd_l: wlan-module-pd-l { + rockchip,pins = ; + }; + }; + + codec { + /* Has external pullup */ + headset_int_l: headset-int-l { + rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + mic_int: mic-int { + rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + max98357a { + sdmode_en: sdmode-en { + rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pcie { + pcie_clkreqn_cpm: pci-clkreqn-cpm { + /* + * Since our pcie doesn't support ClockPM(CPM), we want + * to hack this as gpio, so the EP could be able to + * de-assert it along and make ClockPM(CPM) work. + */ + rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + /* + * We run sdmmc at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + /* + * In our case the official card detect is hooked to ground + * to avoid getting access to JTAG just by sticking something + * in the SD card slot (see the force_jtag bit in the TRM). + * + * We still configure it as card detect because it doesn't + * hurt and dw_mmc will ignore it. We make sure to disable + * the pull though so we don't burn needless power. + */ + sdmmc_cd: sdmcc-cd { + rockchip,pins = + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + + /* This is where we actually hook up CD; has external pull */ + sdmmc_cd_gpio: sdmmc-cd-gpio { + rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + spi1 { + spi1_sleep: spi1-sleep { + /* + * Pull down SPI1 CLK/CS/RX/TX during suspend, to + * prevent leakage. + */ + rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, + <1 10 RK_FUNC_GPIO &pcfg_pull_down>, + <1 7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + touchscreen { + touch_int_l: touch-int-l { + rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_reset_l: touch-reset-l { + rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + trackpad { + ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { + rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + }; + + trackpad_int_l: trackpad-int-l { + rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_perst_l: wifi-perst-l { + rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_module_reset_l: wlan-module-reset-l { + /* + * We want this driven low ASAP (As {Soon,Strongly} As + * Possible), to avoid leakage through the powered-down + * WiFi. + */ + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_host_wake_l: bt-host-wake-l { + /* Kevin has an external pull up, but Gru does not */ + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + write-protect { + ap_fw_wp: ap-fw-wp { + rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; From acaa71a6c746df80b33ace88689b336de96e833e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 20 Mar 2017 16:53:43 -0700 Subject: [PATCH 087/180] arm64: dts: rockchip: describe Gru/Kevin OPPs + CPU regulators Used for Gru/Kevin only, as they're the only ones which have a described CPU regulator. Also, I'm not sure we've validated this table non-Gru boards. At the same time, partially describe PWM regulators for Gru, so cpufreq doesn't think it can crank up the clock speed without changing the voltage. However, we don't yet have the DT bindings to fully describe the Over Voltage Protection (OVP) circuits on these boards. Without that description, we might end up changing the voltage too much, too fast. Add the pwm-regulator descriptions and associate the CPU OPPs, but leave them disabled. Signed-off-by: Brian Norris [shared gru/kevin parts on a gru device] Tested-by: Enric Balletbo i Serra [with a bit of reordering] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 139 ++++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi | 145 +++++++++++++++++++ 2 files changed, 284 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 1a57014a7b59..0d960b7f7625 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -44,6 +44,7 @@ #include #include "rk3399.dtsi" +#include "rk3399-opp.dtsi" / { chosen { @@ -163,6 +164,90 @@ vin-supply = <&ppvar_sys>; }; + ppvar_bigcpu: ppvar-bigcpu { + compatible = "pwm-regulator"; + regulator-name = "ppvar_bigcpu"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm1 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <798674>; + regulator-max-microvolt = <1302172>; + }; + + ppvar_litcpu: ppvar-litcpu { + compatible = "pwm-regulator"; + regulator-name = "ppvar_litcpu"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm2 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <799065>; + regulator-max-microvolt = <1303738>; + }; + + ppvar_gpu: ppvar-gpu { + compatible = "pwm-regulator"; + regulator-name = "ppvar_gpu"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm0 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <785782>; + regulator-max-microvolt = <1217729>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "pwm-regulator"; + regulator-name = "ppvar_centerlogic"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm3 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800069>; + regulator-max-microvolt = <1049692>; + }; + /* Schematics call this PPVAR even though it's fixed */ ppvar_logic: ppvar-logic { compatible = "regulator-fixed"; @@ -393,6 +478,60 @@ }; }; +/* + * Set some suspend operating points to avoid OVP in suspend + * + * When we go into S3 ARM Trusted Firmware will transition our PWM regulators + * from wherever they're at back to the "default" operating point (whatever + * voltage we get when we set the PWM pins to "input"). + * + * This quick transition under light load has the possibility to trigger the + * regulator "over voltage protection" (OVP). + * + * To make extra certain that we don't hit this OVP at suspend time, we'll + * transition to a voltage that's much closer to the default (~1.0 V) so that + * there will not be a big jump. Technically we only need to get within 200 mV + * of the default voltage, but the speed here should be fast enough and we need + * suspend/resume to be rock solid. + */ + +&cluster0_opp { + opp05 { + opp-suspend; + }; +}; + +&cluster1_opp { + opp06 { + opp-suspend; + }; +}; + +&cpu_l0 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l1 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l2 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l3 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_b0 { + cpu-supply = <&ppvar_bigcpu>; +}; + +&cpu_b1 { + cpu-supply = <&ppvar_bigcpu>; +}; + + &cru { assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi new file mode 100644 index 000000000000..dd82e16236a8 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -0,0 +1,145 @@ +/* + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + cluster0_opp: opp-table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <800000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <875000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <925000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1050000>; + }; + opp06 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1125000>; + }; + }; + + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <875000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1075000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1150000>; + }; + opp08 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <1250000>; + }; + }; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; From 531b3c49b384c29baec7b7b271a7739a23858e3a Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Tue, 16 Feb 2016 08:55:41 +0100 Subject: [PATCH 088/180] arm64: dts: rockchip: remove wrongly added idle states on rk3368 As reported by Lorenzo, the residency/latency values defined in the idle-state for rk3368 "make no sense". When introducing them I simply took the idle-state node from the vendor kernel in error as I didn't look up if these values were sane in the first place. Talking to people and determining why they were used in this way showed that it was meant to make sure the cpu_suspend callback got initialized which at the 3.10 time was somehow required even for wfi-based idle handling. Of course the generic arch_cpu_idle() now does wfi-based idle-handling already and the rk3368 does not implement any other idle states than the default WFI, so these wrong idle-states should go away. Reported-by: Lorenzo Pieralisi Signed-off-by: Heiko Stuebner Acked-by: Lorenzo Pieralisi --- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a635adc47e74..a782a1351457 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -108,23 +108,10 @@ }; }; - idle-states { - entry-method = "psci"; - - cpu_sleep: cpu-sleep-0 { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <0x3fffffff>; - exit-latency-us = <0x40000000>; - min-residency-us = <0xffffffff>; - }; - }; - cpu_l0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -134,7 +121,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -142,7 +128,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -150,7 +135,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -158,7 +142,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -168,7 +151,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -176,7 +158,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -184,7 +165,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; }; From 4b4c0db538fa6e3f31bc40ddc17c1d5facb49d36 Mon Sep 17 00:00:00 2001 From: Huibin Hong Date: Fri, 3 Mar 2017 17:49:09 +0800 Subject: [PATCH 089/180] arm64: dts: rockchip: add dmac nodes for rk3368 SoCs Add dmac bus and dmac peri dts nodes for peripherals, such as I2S, SPI, UART and so on. Signed-off-by: Huibin Hong Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 29 ++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a782a1351457..02714271d110 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -169,6 +169,35 @@ }; }; + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = , + ; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC_PERI>; + clock-names = "apb_pclk"; + }; + + dmac_bus: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = , + ; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC_BUS>; + clock-names = "apb_pclk"; + }; + }; + arm-pmu { compatible = "arm,armv8-pmuv3"; interrupts = , From f7d89dfe1e31b315efb6bb43bdb7a9e4063154b7 Mon Sep 17 00:00:00 2001 From: Jianqun Xu Date: Fri, 17 Mar 2017 11:32:43 +0800 Subject: [PATCH 090/180] arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs I2S of RK3368 SoCs keep same as RK3066 SoCs found on Rockchip, add nodes to support them. Signed-off-by: Jianqun Xu Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 38 ++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 02714271d110..fad14d792f0b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -693,6 +693,30 @@ interrupts = ; }; + i2s_2ch: i2s-2ch@ff890000 { + compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff890000 0x0 0x1000>; + interrupts = ; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>; + dmas = <&dmac_bus 6>, <&dmac_bus 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s_8ch: i2s-8ch@ff898000 { + compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff898000 0x0 0x1000>; + interrupts = ; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S_8CH>, <&cru HCLK_I2S_8CH>; + dmas = <&dmac_bus 0>, <&dmac_bus 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_8ch_bus>; + status = "disabled"; + }; + gic: interrupt-controller@ffb71000 { compatible = "arm,gic-400"; interrupt-controller; @@ -895,6 +919,20 @@ }; }; + i2s { + i2s_8ch_bus: i2s-8ch-bus { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, + <2 13 RK_FUNC_1 &pcfg_pull_none>, + <2 14 RK_FUNC_1 &pcfg_pull_none>, + <2 15 RK_FUNC_1 &pcfg_pull_none>, + <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 17 RK_FUNC_1 &pcfg_pull_none>, + <2 18 RK_FUNC_1 &pcfg_pull_none>, + <2 19 RK_FUNC_1 &pcfg_pull_none>, + <2 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>; From ec9b506fe37f8820c6fb6ce8cdd1d499aab9b3e0 Mon Sep 17 00:00:00 2001 From: Jianqun Xu Date: Fri, 17 Mar 2017 11:32:44 +0800 Subject: [PATCH 091/180] arm64: dts: rockchip: disable mailbox of RK3368 SoCs per default Default to disable mailbox in rk3368 core dts file. Signed-off-by: Jianqun Xu Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index fad14d792f0b..2f1dbc4c811f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -640,6 +640,7 @@ clocks = <&cru PCLK_MAILBOX>; clock-names = "pclk_mailbox"; #mbox-cells = <1>; + status = "disabled"; }; pmugrf: syscon@ff738000 { From d0302e06798f553992e2879f3eeba4cdff64595e Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 17 Mar 2017 08:11:01 +0100 Subject: [PATCH 092/180] arm64: dts: rockchip: add rk3368 dw-mmc resets dw-mmc got its reset-properties specified, so add the softresets for it on the rk3368. Signed-off-by: Heiko Stuebner Reviewed-by: Shawn Lin --- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 2f1dbc4c811f..6d5dc0587e59 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -246,6 +246,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = ; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -258,6 +260,8 @@ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; fifo-depth = <0x100>; interrupts = ; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -270,6 +274,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = ; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; From 04dc7f62037b0d3aead0dc62231efad89affa9f3 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 17 Mar 2017 09:38:06 +0100 Subject: [PATCH 093/180] arm64: dts: rockchip: add rk3399 dw-mmc resets dw-mmc got its reset-properties specified, so add the softresets for it on the rk3399. Signed-off-by: Heiko Stuebner Tested-by: Shawn Lin Reviewed-by: Shawn Lin --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index d8dda8b97b43..6aa647629e82 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -285,6 +285,8 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -299,6 +301,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; power-domains = <&power RK3399_PD_SD>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; status = "disabled"; }; From 41b464ef10219e45513d1bcaddacd47ce0bd6136 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Mon, 20 Mar 2017 10:38:00 +0800 Subject: [PATCH 094/180] arm64: dts: rockchip: fix PCIe domain number for rk3399 It's suggested to fix the domain number for all PCIe host bridges or not set it at all. However, if we don't fix it, the domain number will keep increasing ever when doing unbind/bind test, which makes the bus tree of lspci introduce pointless domain hierarchy. More investigation shows the domain number allocater of PCI doesn't consider the conflict of domain number if we have more than one PCIe port belonging to different domains. So once unbinding/binding one of them and keep others would going to overflow the domain number so that finally it will share the same domain as others, but actually it shouldn't. We should fix the domain number for PCIe or invent new indexing ID mechanisms. However it isn't worth inventing new indexing ID mechanisms personlly, Just look at how other Root Complex drivers did, for instance, broadcom and qualcomm, it seems fixing the domain number was more popular. So this patch gonna fix the domain number of PCIe for rk3399. Signed-off-by: Shawn Lin Reviewed-by: Brian Norris Tested-by: Brian Norris Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 6aa647629e82..00611f9c52cc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -234,6 +234,7 @@ <0 0 0 2 &pcie0_intc 1>, <0 0 0 3 &pcie0_intc 2>, <0 0 0 4 &pcie0_intc 3>; + linux,pci-domain = <0>; max-link-speed = <1>; msi-map = <0x0 &its 0x0 0x1000>; phys = <&pcie_phy>; From b9ed79fa91c5271ca166dfde99883ca3afb190fe Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 20 Mar 2017 16:53:44 -0700 Subject: [PATCH 095/180] arm64: dts: rockchip: add regulator info for Kevin digitizer We need to enable this regulator before the digitizer can be used. Wacom recommended waiting for 100 ms before talking to the HID. Signed-off-by: Brian Norris [store chip ident as comment until i2c multi-compatibles are sorted] Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index fd24071320be..658bb9dc9dfd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -223,11 +223,15 @@ ap_i2c_dig: &i2c2 { i2c-scl-rising-time-ns = <300>; digitizer: digitizer@9 { + /* wacom,w9013 */ compatible = "hid-over-i2c"; reg = <0x9>; pinctrl-names = "default"; pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>; + vdd-supply = <&p3_3v_dig>; + post-power-on-delay-ms = <100>; + interrupt-parent = <&gpio2>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; From 82838e6f523aa02332318f09599474ed2ac4d134 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 7 Mar 2017 11:40:22 +0100 Subject: [PATCH 096/180] ARM64: dts: meson-gx: Add Buttons to Q200 and P230 boards This patch adds support for the P230 and Q200 ADC laddered button and GPIO button. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 40 +++++++++++++++++++ .../arm64/boot/dts/amlogic/meson-gxm-q200.dts | 40 +++++++++++++++++++ 2 files changed, 80 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index 7663d6775823..f9fbfdad8dde 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -43,12 +43,47 @@ /dts-v1/; +#include + #include "meson-gxl-s905d.dtsi" #include "meson-gx-p23x-q20x.dtsi" / { compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl"; model = "Amlogic Meson GXL (S905D) P230 Development Board"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; /* P230 has exclusive choice between internal or external PHY */ @@ -77,3 +112,8 @@ max-speed = <1000>; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index e6ac39b712b7..b65776b01911 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -43,12 +43,47 @@ /dts-v1/; +#include + #include "meson-gxm.dtsi" #include "meson-gx-p23x-q20x.dtsi" / { compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm"; model = "Amlogic Meson GXM (S912) Q200 Development Board"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; /* Q200 has exclusive choice between internal or external PHY */ @@ -77,3 +112,8 @@ max-speed = <1000>; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; From b03c7d6438bbf59b559c3fe219a74d7a86bc6310 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 9 Mar 2017 15:52:45 +0100 Subject: [PATCH 097/180] ARM64: dts: meson-gxbb-odroidc2: Add GPIO lines names This patch describes the GPIO lines usage on the Odroid-C2 board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c80d3a913907..a266578554cb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -172,6 +172,57 @@ }; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", + "USB HUB nRESET", "USB OTG Power En", + "J7 Header Pin2", "IR In", "J7 Header Pin4", + "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7", + "HDMI CEC", "SYS LED"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", + "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", + "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En", + "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3", + "Eth PHY nRESET", "Eth PHY Intc", + /* Bank GPIOH */ + "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4", + "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk", + "eMMC Reset", "eMMC CMD", + "", "", "", "", "", "", "", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "PWM D", "PWM B", + /* Bank GPIOY */ + "Revision Bit0", "Revision Bit1", "", + "J2 Header Pin35", "", "", "", "J2 Header Pin36", + "J2 Header Pin31", "", "", "", "TF VDD En", + "J2 Header Pin32", "J2 Header Pin26", "", "", + /* Bank GPIOX */ + "J2 Header Pin29", "J2 Header Pin24", + "J2 Header Pin23", "J2 Header Pin22", + "J2 Header Pin21", "J2 Header Pin18", + "J2 Header Pin33", "J2 Header Pin19", + "J2 Header Pin16", "J2 Header Pin15", + "J2 Header Pin12", "J2 Header Pin13", + "J2 Header Pin8", "J2 Header Pin10", + "", "", "", "", "", + "J2 Header Pin11", "", "J2 Header Pin7", + /* Bank GPIOCLK */ + "", "", "", "", + /* GPIO_TEST_N */ + ""; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; From c34cd35ed98ffc2c6312c7fd19acd2bad55ff045 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 9 Mar 2017 15:52:46 +0100 Subject: [PATCH 098/180] ARM64: dts: meson-gxbb-odroidc2: Fix TFLASH VDD regulator GPIO line The wrong GPIO line was provided here. Fixes: ef8d2ffedf18 ("ARM64: dts: meson-gxbb: add MMC support") Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index a266578554cb..76cc970cc4aa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -96,7 +96,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; }; From 86fcb2bca0b8eccf97991e601b1a75a9c5da0406 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 8 Mar 2017 18:33:13 +0100 Subject: [PATCH 099/180] ARM64: dts: marvell: armada-37xx: Fix interrupt mapping for USB3 IRQ number for xhci controller was wrong, fix it. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index cf0c2f9ebd7d..4c7ff32acb97 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -200,7 +200,7 @@ compatible = "marvell,armada3700-xhci", "generic-xhci"; reg = <0x58000 0x4000>; - interrupts = ; + interrupts = ; status = "disabled"; }; From e4afb4804ddce1306607dfcf913abed90b97c862 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 8 Mar 2017 18:33:14 +0100 Subject: [PATCH 100/180] ARM64: dts: marvell: armada-37xx: Add clock resource for USB3 Now that clocks are available provide a clock resource for xhci node. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 4c7ff32acb97..2a4e8dbe33aa 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -201,6 +201,7 @@ "generic-xhci"; reg = <0x58000 0x4000>; interrupts = ; + clocks = <&sb_periph_clk 12>; status = "disabled"; }; From a12af1c20751340ab6e449a5ef78b37d31123aca Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 8 Mar 2017 18:33:15 +0100 Subject: [PATCH 101/180] ARM64: dts: marvell: armada-3720-db: Add phy for USB3 Now that the gpio expander is present in the dts, use it to add an USB3 PHY using one of these gpio as a regulator. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 864936acc316..01e583c07d46 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -46,6 +46,7 @@ /dts-v1/; +#include #include "armada-372x.dtsi" / { @@ -60,6 +61,21 @@ device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; }; &i2c0 { @@ -127,6 +143,7 @@ /* CON31 */ &usb3 { status = "okay"; + usb-phy = <&usb3_phy>; }; /* CON17 (PCIe) / CON12 (mini-PCIe) */ From 85bee2af8abc1acff7cbf6fd1b4ce733c19c992b Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 8 Mar 2017 18:35:19 +0100 Subject: [PATCH 102/180] ARM64: dts: marvell: armada-3720 add RTC support The Armada 3720 DB board has an RTC on the I2C bus. It's a PT7C4337A from Pericom but which claims to be fully compatible with the ds1337. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 01e583c07d46..2a6eef2d4d66 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -98,6 +98,12 @@ * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS */ }; + + rtc@68 { + /* PT7C4337A from pericom fully compatible with the ds1337 */ + compatible = "dallas,ds1337"; + reg = <0x68>; + }; }; /* CON3 */ From 60894719241e2b3d6d202304de9ad33a8da3685c Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 16 Mar 2017 16:16:27 +0100 Subject: [PATCH 103/180] arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K This commit adds the description of the PPv2.2 hardware block for the Marvell Armada 7K and Armada 8K processors, and their corresponding Armada 7040 and 8040 Development boards. Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- .../arm64/boot/dts/marvell/armada-7040-db.dts | 25 +++++++++++++ .../arm64/boot/dts/marvell/armada-8040-db.dts | 16 ++++++++ .../boot/dts/marvell/armada-cp110-master.dtsi | 37 +++++++++++++++++++ .../boot/dts/marvell/armada-cp110-slave.dtsi | 37 +++++++++++++++++++ 4 files changed, 115 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 070b589680c5..bb0e1e8e7138 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -146,3 +146,28 @@ &cpm_usb3_1 { status = "okay"; }; + +&cpm_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cpm_ethernet { + status = "okay"; +}; + +&cpm_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; +}; + +&cpm_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 6e6f182fb297..80e685e4235d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -124,6 +124,22 @@ status = "okay"; }; +&cpm_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cpm_ethernet { + status = "okay"; +}; + +&cpm_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + /* CON5 on CP1 expansion */ &cps_pcie2 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index d12741414009..a035f5955282 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -59,6 +59,43 @@ interrupt-parent = <&gic>; ranges = <0x0 0x0 0xf2000000 0x2000000>; + cpm_ethernet: ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; + clock-names = "pp_clk", "gop_clk", "mg_clk"; + status = "disabled"; + dma-coherent; + + cpm_eth0: eth0 { + interrupts = ; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + cpm_eth1: eth1 { + interrupts = ; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + cpm_eth2: eth2 { + interrupts = ; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + cpm_mdio: mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + }; + cpm_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon"; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index d51eb2db6df7..fb9141ab9b37 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -66,6 +66,43 @@ interrupts = ; }; + cps_ethernet: ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>; + clock-names = "pp_clk", "gop_clk", "mg_clk"; + status = "disabled"; + dma-coherent; + + cps_eth0: eth0 { + interrupts = ; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + cps_eth1: eth1 { + interrupts = ; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + cps_eth2: eth2 { + interrupts = ; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + cps_mdio: mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + }; + cps_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon"; From e98fd13413672ce8c4f10b6fa3b34658f738715e Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 18 Mar 2017 13:27:36 +0100 Subject: [PATCH 104/180] ARM64: dts: amlogic: meson-gxl: add the missing PWM pins This adds the new DT nodes for the missing PWM pins in the EE and AO domain. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Reviewed-by: Neil Armstrong Acked-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 56 ++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fe11b5fc61f7..79c387a16fa2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -118,6 +118,20 @@ }; }; + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a"; + }; + }; + + pwm_ao_a_8_pins: pwm_ao_a_8 { + mux { + groups = "pwm_ao_a_8"; + function = "pwm_ao_a"; + }; + }; + pwm_ao_b_pins: pwm_ao_b { mux { groups = "pwm_ao_b"; @@ -277,6 +291,34 @@ }; }; + pwm_a_pins: pwm_a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_c_pins: pwm_c { + mux { + groups = "pwm_c"; + function = "pwm_c"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + pwm_e_pins: pwm_e { mux { groups = "pwm_e"; @@ -284,6 +326,20 @@ }; }; + pwm_f_clk_pins: pwm_f_clk { + mux { + groups = "pwm_f_clk"; + function = "pwm_f"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + }; + }; + hdmi_hpd_pins: hdmi_hpd { mux { groups = "hdmi_hpd"; From 40b9e3f92e616af1fa200827dd49f8a8ff3f8235 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 18 Mar 2017 13:36:55 +0100 Subject: [PATCH 105/180] devicetree: add vendor prefix for Khadas Khadas is a new sub-brand of "Shenzhen Wesion Technology Co., Ltd.". They are developing Amlogic and Rockchip based "DIY boxes" (single board computers): http://khadas.com/ They are best know for their latest product: the Khadas VIM (an Amlogic GXL S905X based SBC). Signed-off-by: Martin Blumenstingl Acked-by: Rob Herring Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index da05060803b2..4dcc3a7bcf2d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -160,6 +160,7 @@ jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH keithkoep Keith & Koep GmbH keymile Keymile GmbH +khadas Khadas kinetic Kinetic Technologies kosagi Sutajio Ko-Usagi PTE Ltd. kyo Kyocera Corporation From 02eff15eefc8c70c86f58683adcc553c778f73c2 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 18 Mar 2017 13:36:56 +0100 Subject: [PATCH 106/180] dt-bindings: amlogic: add the Khadas VIM Signed-off-by: Martin Blumenstingl Acked-by: Rob Herring Signed-off-by: Kevin Hilman --- Documentation/devicetree/bindings/arm/amlogic.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index b3241a6802f6..bfd5b558477d 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -43,6 +43,8 @@ Board compatible values: - "wetek,hub" (Meson gxbb) - "wetek,play2" (Meson gxbb) - "amlogic,p212" (Meson gxl s905x) + - "khadas,vim" (Meson gxl s905x) + - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) - "hwacom,amazetv" (Meson gxl s905x) From e15d2774b8c096f116bf7192b37e8652da71369e Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 18 Mar 2017 13:36:57 +0100 Subject: [PATCH 107/180] ARM64: dts: meson-gxl: add support for the Khadas VIM board The Khadas VIM series consists of two boards which are almost identical: They are both using the same GXL S905X SoC, 100Mbit/s ethernet (through the SoC-internal PHY), 2GB DDR3 memory, a micro-SD card slot, onboard eMMC, Broadcom based SDIO WIFI, 2x USB A and 1x USB Type-C (the latter with OTG support). The red LED is driven by PWM_AO_B (which allows dimming), while the blue LED is managed by the firmware. The differences are: - the VIM Pro has a 16GB eMMC module, while the VIM only has 8GB - the VIM Pro uses an AP6255 a/b/g/n/ac WIFI module, while the VIM comes with an AP6212 b/g/n SDIO WIFI module (the Vim uses an 8GB eMMC module, while The boards are based on Amlogic's GXL S905X P212 reference design, which is why most of the functionality (all MMC controllers and power sequences, IR remote input, the main UART, ADC and ethernet) is simply inherited from meson-gxl-s905x-p212.dtsi. Signed-off-by: Martin Blumenstingl Tested-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../amlogic/meson-gxl-s905x-khadas-vim.dts | 114 ++++++++++++++++++ 2 files changed, 115 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 99ddfc8087d1..b9ad2db7398b 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts new file mode 100644 index 000000000000..3c8b0b51ef27 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2017 Martin Blumenstingl . + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include + +#include "meson-gxl-s905x-p212.dtsi" + +/ { + compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Khadas VIM"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + aliases { + serial2 = &uart_AO_B; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + power { + label = "vim:red:power"; + pwms = <&pwm_AO_ab 1 7812500 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + /* has to be enabled manually when a battery is connected: */ + status = "disabled"; + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&ir { + linux,rc-map-name = "rc-geekbox"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; +}; + +&sd_emmc_a { + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ +&uart_AO { + status = "okay"; +}; + +/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; From 04b36df4067d108383dc10c3ce7cfc45ddec409a Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 13 Mar 2017 10:10:50 +0100 Subject: [PATCH 108/180] ARM64: dts: meson-gx: Finally move common nodes to GX dtsi Since we know the GXBB and GXL/GXM share more hardware, we can safely move the remaining peripheral nodes present in the GXBB dtsi to the common GX dtsi. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 24 ++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 43 ++++----------------- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 8 ++++ 3 files changed, 40 insertions(+), 35 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index d544b8f2ffbf..cd16a11fefb8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -296,6 +296,14 @@ status = "disabled"; }; + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + watchdog@98d0 { compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; reg = <0x0 0x098d0 0x0 0x10>; @@ -342,6 +350,13 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + clkc_AO: clock-controller@040 { + compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + uart_AO: serial@4c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; @@ -358,6 +373,15 @@ status = "disabled"; }; + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pwm_AO_ab: pwm@550 { compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; reg = <0x0 0x00550 0x0 0x10>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 04b3324bc132..c2c41aa879c6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -97,17 +97,6 @@ }; }; -&cbus { - spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; - reg = <0x0 0x08c80 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_SPI>; - status = "disabled"; - }; -}; - ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, @@ -204,30 +193,6 @@ }; }; }; - - clkc_AO: clock-controller@040 { - compatible = "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pwm_ab_AO: pwm@550 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x0550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - i2c_AO: i2c@500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x500 0x0 0x20>; - interrupts = ; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; }; &periphs { @@ -482,6 +447,10 @@ clocks = <&clkc CLKID_I2C>; }; +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + &i2c_B { clocks = <&clkc CLKID_I2C>; }; @@ -521,6 +490,10 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spifc { + clocks = <&clkc CLKID_SPI>; +}; + &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 79c387a16fa2..dd1b0bcfdc94 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -395,6 +395,10 @@ clocks = <&clkc CLKID_I2C>; }; +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + &i2c_B { clocks = <&clkc CLKID_I2C>; }; @@ -434,6 +438,10 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spifc { + clocks = <&clkc CLKID_SPI>; +}; + &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; From 932b3363c0bcd45c90c436ab91c688f064fa8e82 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 13 Mar 2017 10:10:51 +0100 Subject: [PATCH 109/180] ARM64: dts: meson-gx: empty line cleanup Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index cd16a11fefb8..4453c3558870 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -410,7 +410,6 @@ }; }; - hiubus: hiubus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; From e19e64aaf4057cc7ba20d4f573bcda8ea0df8a8c Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 13 Mar 2017 10:10:52 +0100 Subject: [PATCH 110/180] ARM64: dts: meson-gx: Prepend GX generic compatible like other nodes Prepend the compatible strings with a GX generic name in nodes compatible with the GXBB HW and keep the same scheme as other nodes. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 4453c3558870..42e2085a7130 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -233,7 +233,7 @@ }; i2c_A: i2c@8500 { - compatible = "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x08500 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -279,7 +279,7 @@ }; i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -288,7 +288,7 @@ }; i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087e0 0x0 0x20>; interrupts = ; #address-cells = <1>; @@ -297,7 +297,7 @@ }; spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; + compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; reg = <0x0 0x08c80 0x0 0x80>; #address-cells = <1>; #size-cells = <0>; @@ -325,7 +325,7 @@ }; sram: sram@c8000000 { - compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; + compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram"; reg = <0x0 0xc8000000 0x0 0x14000>; #address-cells = <1>; @@ -333,12 +333,12 @@ ranges = <0 0x0 0xc8000000 0x14000>; cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-gxbb-scp-shmem"; + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; reg = <0x13000 0x400>; }; cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-gxbb-scp-shmem"; + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; reg = <0x13400 0x400>; }; }; @@ -390,7 +390,7 @@ }; ir: ir@580 { - compatible = "amlogic,meson-gxbb-ir"; + compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir"; reg = <0x0 0x00580 0x0 0x40>; interrupts = ; status = "disabled"; From 6d7e05ab8ff6f6bb91ecfbbd542240c7b6c23502 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Tue, 21 Mar 2017 16:42:45 +0800 Subject: [PATCH 111/180] arm64: dts: zte: remove zx296718 pll_vga clock Rather than a fixed rate clock, pll_vga is a PLL can be programmed into different freqencies. Let's drop it from device tree and get it registered from clock driver. Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/zte/zx296718.dtsi | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index b850b2cd0adc..1f256495b902 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -235,13 +235,6 @@ clock-output-names = "pll_mac"; }; - pll_vga: clk-pll-1073m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1073000000>; - clock-output-names = "pll_vga"; - }; - pll_mm0: clk-pll-1188m { compatible = "fixed-clock"; #clock-cells = <0>; From 25798d52b87d7c7d775dc7985817592f0ef3dffd Mon Sep 17 00:00:00 2001 From: Jun Nie Date: Tue, 21 Mar 2017 16:52:59 +0800 Subject: [PATCH 112/180] arm64: dts: zte: add mmc devices for zx296718 Add three mmc devices for zx296718 SoC, and enable the SD and eMMMC on zx296718-evb board. Signed-off-by: Jun Nie Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/zte/zx296718-evb.dts | 8 +++ arch/arm64/boot/dts/zte/zx296718.dtsi | 66 ++++++++++++++++++++++++ 2 files changed, 74 insertions(+) diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts index e164ff6de5fc..238311b4cf0f 100644 --- a/arch/arm64/boot/dts/zte/zx296718-evb.dts +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts @@ -59,6 +59,14 @@ }; +&emmc { + status = "okay"; +}; + +&sd1 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index 1f256495b902..30d007b6ab6c 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -298,6 +298,51 @@ status = "disabled"; }; + sd0: mmc@1110000 { + compatible = "zte,zx296718-dw-mshc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01110000 0x1000>; + interrupts = ; + fifo-depth = <32>; + data-addr = <0x200>; + fifo-watermark-aligned; + bus-width = <4>; + clock-frequency = <50000000>; + clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; + clock-names = "biu", "ciu"; + num-slots = <1>; + max-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + status = "disabled"; + }; + + sd1: mmc@1111000 { + compatible = "zte,zx296718-dw-mshc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01111000 0x1000>; + interrupts = ; + fifo-depth = <32>; + data-addr = <0x200>; + fifo-watermark-aligned; + bus-width = <4>; + clock-frequency = <167000000>; + clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>; + clock-names = "biu", "ciu"; + num-slots = <1>; + max-frequency = <167000000>; + cap-sdio-irq; + cap-sd-highspeed; + status = "disabled"; + }; + dma: dma-controller@1460000 { compatible = "zte,zx296702-dma"; reg = <0x01460000 0x1000>; @@ -332,6 +377,27 @@ reg = <0x1463000 0x1000>; }; + emmc: mmc@1470000{ + compatible = "zte,zx296718-dw-mshc"; + reg = <0x01470000 0x1000>; + interrupts = ; + zte,aon-syscon = <&aon_sysctrl>; + bus-width = <8>; + fifo-depth = <128>; + data-addr = <0x200>; + fifo-watermark-aligned; + clock-frequency = <167000000>; + clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>; + clock-names = "biu", "ciu"; + max-frequency = <167000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + disable-wp; + status = "disabled"; + }; + audiocrm: clock-controller@1480000 { compatible = "zte,zx296718-audiocrm"; reg = <0x01480000 0x1000>; From 25bd9d5e2822a504481089933bbb8ba98c96199f Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 22 Sep 2016 19:48:39 +0800 Subject: [PATCH 113/180] arm64: dts: zte: add vou and hdmi devices for zx296718 It adds VOU DPC device and enables HDMI support, which includes both display and audio through SPDIF interface. Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/zte/zx296718-evb.dts | 20 +++++++++++ arch/arm64/boot/dts/zte/zx296718.dtsi | 46 ++++++++++++++++++++++++ 2 files changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts index 238311b4cf0f..bb900d2bbcfb 100644 --- a/arch/arm64/boot/dts/zte/zx296718-evb.dts +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts @@ -57,16 +57,36 @@ reg = <0x40000000 0x40000000>; }; + sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "zx_snd_spdif0"; + + simple-audio-card,cpu { + sound-dai = <&spdif0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; }; &emmc { status = "okay"; }; +&hdmi { + status = "okay"; +}; + &sd1 { status = "okay"; }; +&spdif0 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index 30d007b6ab6c..fc1fdf10df76 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -366,6 +366,40 @@ #clock-cells = <1>; }; + vou: vou@1440000 { + compatible = "zte,zx296718-vou"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1440000 0x10000>; + + dpc: dpc@0 { + compatible = "zte,zx296718-dpc"; + reg = <0x0000 0x1000>, <0x1000 0x1000>, + <0x5000 0x1000>, <0x6000 0x1000>, + <0xa000 0x1000>; + reg-names = "osd", "timing_ctrl", + "dtrc", "vou_ctrl", + "otfppu"; + interrupts = ; + clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, + <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; + clock-names = "aclk", "ppu_wclk", + "main_wclk", "aux_wclk"; + }; + + hdmi: hdmi@c000 { + compatible = "zte,zx296718-hdmi"; + reg = <0xc000 0x4000>; + interrupts = ; + clocks = <&topcrm HDMI_OSC_CEC>, + <&topcrm HDMI_OSC_CLK>, + <&topcrm HDMI_XCLK>; + clock-names = "osc_cec", "osc_clk", "xclk"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + topcrm: clock-controller@1461000 { compatible = "zte,zx296718-topcrm"; reg = <0x01461000 0x1000>; @@ -403,5 +437,17 @@ reg = <0x01480000 0x1000>; #clock-cells = <1>; }; + + spdif0: spdif@1488000 { + compatible = "zte,zx296702-spdif"; + reg = <0x1488000 0x1000>; + clocks = <&audiocrm AUDIO_SPDIF0_WCLK>; + clock-names = "tx"; + interrupts = ; + #sound-dai-cells = <0>; + dmas = <&dma 30>; + dma-names = "tx"; + status = "disabled"; + }; }; }; From f006aaf7b11230e38a35f09d706e751fa77eb799 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 19 Jan 2017 22:45:23 +0800 Subject: [PATCH 114/180] arm64: dts: zte: add tvenc device for zx296718 It adds VOU tvenc device in zx296718.dtsi, so that boards with TV connector can enable the support by changing 'status' in board DTS file. Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/zte/zx296718.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index fc1fdf10df76..316dc713268c 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -398,6 +398,13 @@ #sound-dai-cells = <0>; status = "disabled"; }; + + tvenc: tvenc@2000 { + compatible = "zte,zx296718-tvenc"; + reg = <0x2000 0x1000>; + zte,tvenc-power-control = <&sysctrl 0x170 0x10>; + status = "disabled"; + }; }; topcrm: clock-controller@1461000 { From ca02e3f9b1853ff82565a3262146a710f5af7ebb Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 23 Mar 2017 11:41:11 +0100 Subject: [PATCH 115/180] ARM64: dts: meson-gxl: Add missing pinctrl pins groups Add pinctrl pins nodes following the additions of missing pins in the pinctrl driver. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index dd1b0bcfdc94..269458b05fd4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -103,6 +103,13 @@ }; }; + uart_ao_b_0_1_pins: uart_ao_b_0_1 { + mux { + groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1"; + function = "uart_ao_b"; + }; + }; + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { mux { groups = "uart_cts_ao_b", @@ -118,6 +125,14 @@ }; }; + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; + }; + }; + pwm_ao_a_3_pins: pwm_ao_a_3 { mux { groups = "pwm_ao_a_3"; @@ -138,6 +153,13 @@ function = "pwm_ao_b"; }; }; + + pwm_ao_b_6_pins: pwm_ao_b_6 { + mux { + groups = "pwm_ao_b_6"; + function = "pwm_ao_b"; + }; + }; }; }; @@ -168,6 +190,16 @@ }; }; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", From 4e36de179f27d1017e60e25e429f50ed8382f195 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 7 Mar 2017 01:17:49 +0800 Subject: [PATCH 116/180] arm64: allwinner: h5: add Allwinner H5 .dtsi The Allwinner H5 SoC is pin-compatible to the H3 SoC, but uses Cortex-A53 cores instead. Based on the now shared base .dtsi describing the common peripherals describe the H5 specific nodes on top of that. That symlinks in the sunxi-h3-h5.dtsi from the arch/arm tree. Signed-off-by: Andre Przywara [Icenowy: add H5 pinctrl compatible, and changes for my h3-h5 dtsi refactor, commit message changed to meet new arm64 naming scheme, drop H3 pinctrl compatible because of interrupt bank change, drop H3 ccu compatible because of clock change, drop ccu node as it come into h3-h5 dtsi] Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 124 ++++++++++++++++++ .../arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi | 1 + 2 files changed, 125 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi create mode 120000 arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi new file mode 100644 index 000000000000..4d314a253fd9 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-h3-h5.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; + +&ccu { + compatible = "allwinner,sun50i-h5-ccu"; +}; + +&mmc0 { + compatible = "allwinner,sun50i-h5-mmc", + "allwinner,sun50i-a64-mmc"; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; +}; + +&mmc1 { + compatible = "allwinner,sun50i-h5-mmc", + "allwinner,sun50i-a64-mmc"; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; +}; + +&mmc2 { + compatible = "allwinner,sun50i-h5-emmc", + "allwinner,sun50i-a64-emmc"; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; +}; + +&pio { + compatible = "allwinner,sun50i-h5-pinctrl"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi new file mode 120000 index 000000000000..036f01dc2b9b --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/sunxi-h3-h5.dtsi \ No newline at end of file From 9d41bbb6e13f7a3209ea4c4d86c2753c8f075a32 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 7 Mar 2017 01:17:50 +0800 Subject: [PATCH 117/180] arm64: allwinner: h5: add support for the Orange Pi PC 2 board The Orange Pi PC 2 is a typical single board computer using the Allwinner H5 SoC. Apart from the usual suspects it features three separately driven USB ports and a Gigabit Ethernet port. Also it has a SPI NOR flash soldered, from which the board can boot from. This enables the SBC to behave like a "real computer" with built-in firmware. Add the board specific .dts file, which includes the H5 .dtsi and enables the peripherals that we support so far. Reviewed-by: Rask Ingemann Lambertsen Signed-off-by: Andre Przywara [Icenowy: dropped all GPIO pinctrl nodes, change red LED gpio, change MMC cd to active-low, rename some node names to prevent underscores] Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 163 ++++++++++++++++++ 2 files changed, 164 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index bc6f342be59f..244e8b7565f9 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts new file mode 100644 index 000000000000..30639729920d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include +#include +#include + +/ { + model = "Xunlong Orange Pi PC 2"; + compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5"; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + }; + + r-gpio-keys { + compatible = "gpio-keys"; + + sw4 { + label = "sw4"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; From 5313ea66a458bdbd1077a3b9366efba64daa699d Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 25 Mar 2017 22:50:15 +0800 Subject: [PATCH 118/180] arm64: allwinner: h5: enable USB OTG on Orange Pi PC 2 board Orange Pi PC 2 board features a OTG port like the one on older H3 Orange Pi's, with PG12 pin being the id det pin and PL2 being the vbus driver pin. Add support for it. Signed-off-by: Icenowy Zheng Acked-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 29 +++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index 30639729920d..dfecc17dcc92 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -90,6 +90,16 @@ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; + }; }; &codec { @@ -100,6 +110,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -127,6 +141,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -157,7 +175,14 @@ status = "disabled"; }; -&usbphy { - /* USB VBUS is always on */ +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A ports' VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; status = "okay"; }; From 57ef579878c3a9a168ce071a78982216338ba500 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 22 Mar 2017 11:18:55 +0100 Subject: [PATCH 119/180] ARM64: dts: meson-gx: Add Mali nodes for GXBB and GXL The same Mali-450 MP3 GPU is present in the GXBB and GXL SoCs. The node is simply added in the meson-gxbb.dtsi file. For GXL, since a lot is shared with the GXM that has a Mali-T820 IP, this patch adds a new meson-gxl-mali.dtsi and is included in the SoC specific dtsi files. Signed-off-by: Neil Armstrong [khilman: s/MALI/Mali in changelog] Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 37 ++++++++++++++++ .../boot/dts/amlogic/meson-gxl-mali.dtsi | 43 +++++++++++++++++++ .../boot/dts/amlogic/meson-gxl-s905d.dtsi | 1 + .../boot/dts/amlogic/meson-gxl-s905x.dtsi | 1 + 4 files changed, 82 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index c2c41aa879c6..65843b1feaf3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -443,6 +443,43 @@ }; }; +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; + &i2c_A { clocks = <&clkc CLKID_I2C>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi new file mode 100644 index 000000000000..f06cc234693b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2017 BayLibre SAS + * Author: Neil Armstrong + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi index 615308e55576..5a90e30c1006 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi @@ -42,6 +42,7 @@ */ #include "meson-gxl.dtsi" +#include "meson-gxl-mali.dtsi" / { compatible = "amlogic,s905d", "amlogic,meson-gxl"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi index 08237ee1e362..0f78d836edaf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi @@ -42,6 +42,7 @@ */ #include "meson-gxl.dtsi" +#include "meson-gxl-mali.dtsi" / { compatible = "amlogic,s905x", "amlogic,meson-gxl"; From 18ae17bc513b4dfb6791512e27a3ede02a6324db Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 23 Mar 2017 17:27:24 +0100 Subject: [PATCH 120/180] ARM64: dts: meson-gxbb: Add gpio-ranges properties Signed-off-by: Neil Armstrong Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 65843b1feaf3..74f48f16480d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -118,6 +118,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 14>; }; uart_ao_a_pins: uart_ao_a { @@ -210,6 +211,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 14 120>; }; emmc_pins: emmc { From 84412e4e857f24c26682f1d7f8fd505e52fa9e33 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 23 Mar 2017 17:27:25 +0100 Subject: [PATCH 121/180] ARM64: dts: meson-gxl: Add gpio-ranges properties Signed-off-by: Neil Armstrong Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 269458b05fd4..32bbc4f24fa9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -79,6 +79,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 14>; }; uart_ao_a_pins: uart_ao_a { @@ -178,6 +179,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 14 101>; }; emmc_pins: emmc { From 90f349ade2f1786d9f30b581343d543db4f6d38d Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 23 Mar 2017 17:27:26 +0100 Subject: [PATCH 122/180] ARM: dts: meson8: Add gpio-ranges properties Signed-off-by: Neil Armstrong Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 45619f6162c5..ebc763eab195 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -106,6 +106,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 120>; }; spi_nor_pins: nor { @@ -148,6 +149,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 120 16>; }; uart_ao_a_pins: uart_ao_a { From 8d1b908fe7540a90837e0d08c09fcf2f5e268f00 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 23 Mar 2017 17:27:27 +0100 Subject: [PATCH 123/180] ARM: dts: meson8b: Add gpio-ranges properties Signed-off-by: Neil Armstrong Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- arch/arm/boot/dts/meson8b.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 41fd53671859..828aa49c678c 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -198,6 +198,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 130>; }; }; @@ -215,6 +216,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 130 16>; }; uart_ao_a_pins: uart_ao_a { From 1db3b92cb24cf738a7edbe13ee2f21905adf0c6b Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Thu, 23 Mar 2017 17:27:29 +0100 Subject: [PATCH 124/180] ARM64: dts: meson-gxbb: Add USB Hub GPIO hog The ODroid-C2 on-board USB Hub needs to to have it's reset signal set to high level in order to be enumerated by the USB Host Controller. But this management must be part of the currently in-development Generic Power Sequence patch that will allow a USB Controller driver to start and stop a power sequence associated to the USB Bus. In the meantime, a simple USB Hog will work to enable the USB Hub. Signed-off-by: Neil Armstrong Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-odroidc2.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 76cc970cc4aa..a8f1f8a00b51 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -235,6 +235,21 @@ pinctrl-names = "default"; }; +&gpio_ao { + /* + * WARNING: The USB Hub on the Odroid-C2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = ; + output-high; + line-name = "usb-hub-reset"; + }; +}; + &usb0_phy { status = "okay"; phy-supply = <&usb_otg_pwr>; From 552b1e56d95285b75add602d3c84b18a85b5ad9c Mon Sep 17 00:00:00 2001 From: jbrunet Date: Sun, 26 Mar 2017 19:19:20 +0200 Subject: [PATCH 125/180] ARM64: dts: meson-gxbb: add i2s output pins Add EE and AO domains pins for the i2s output clocks and data to the gxbb device tree. Acked-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 63 +++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 74f48f16480d..7d0e2dcb9efe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -193,6 +193,48 @@ function = "pwm_ao_b"; }; }; + + i2s_am_clk_pins: i2s_am_clk { + mux { + groups = "i2s_am_clk"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ao_clk_pins: i2s_out_ao_clk { + mux { + groups = "i2s_out_ao_clk"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_lr_clk_pins: i2s_out_lr_clk { + mux { + groups = "i2s_out_lr_clk"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch01_ao_pins: i2s_out_ch01_ao { + mux { + groups = "i2s_out_ch01_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch23_ao_pins: i2s_out_ch23_ao { + mux { + groups = "i2s_out_ch23_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch45_ao_pins: i2s_out_ch45_ao { + mux { + groups = "i2s_out_ch45_ao"; + function = "i2s_out_ao"; + }; + }; }; }; @@ -434,6 +476,27 @@ function = "hdmi_i2c"; }; }; + + i2sout_ch23_y_pins: i2sout_ch23_y { + mux { + groups = "i2sout_ch23_y"; + function = "i2s_out"; + }; + }; + + i2sout_ch45_y_pins: i2sout_ch45_y { + mux { + groups = "i2sout_ch45_y"; + function = "i2s_out"; + }; + }; + + i2sout_ch67_y_pins: i2sout_ch67_y { + mux { + groups = "i2sout_ch67_y"; + function = "i2s_out"; + }; + }; }; }; From 07a4652f0e92ecb3f9e6901523a8937800d3d067 Mon Sep 17 00:00:00 2001 From: jbrunet Date: Sun, 26 Mar 2017 19:19:21 +0200 Subject: [PATCH 126/180] ARM64: dts: meson-gxbb: add spdif output pins Add EE and AO domains pins for the spdif output to the gxbb device tree. Acked-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 7d0e2dcb9efe..b56732f4defb 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -235,6 +235,20 @@ function = "i2s_out_ao"; }; }; + + spdif_out_ao_6_pins: spdif_out_ao_6 { + mux { + groups = "spdif_out_ao_6"; + function = "spdif_out_ao"; + }; + }; + + spdif_out_ao_13_pins: spdif_out_ao_13 { + mux { + groups = "spdif_out_ao_13"; + function = "spdif_out_ao"; + }; + }; }; }; @@ -497,6 +511,13 @@ function = "i2s_out"; }; }; + + spdif_out_y_pins: spdif_out_y { + mux { + groups = "spdif_out_y"; + function = "spdif_out"; + }; + }; }; }; From c16fe9a1c7a38cde4e5d98527e0047f23ba4fd0b Mon Sep 17 00:00:00 2001 From: jbrunet Date: Sun, 26 Mar 2017 19:19:22 +0200 Subject: [PATCH 127/180] ARM64: dts: meson-gxl: add i2s output pins Add EE and AO domains pins for the i2s output clocks and data the gxl device tree Acked-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 62 ++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 32bbc4f24fa9..79c230b12fff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -161,6 +161,20 @@ function = "pwm_ao_b"; }; }; + + i2s_out_ch23_ao_pins: i2s_out_ch23_ao { + mux { + groups = "i2s_out_ch23_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch45_ao_pins: i2s_out_ch45_ao { + mux { + groups = "i2s_out_ch45_ao"; + function = "i2s_out_ao"; + }; + }; }; }; @@ -387,6 +401,54 @@ function = "hdmi_i2c"; }; }; + + i2s_am_clk_pins: i2s_am_clk { + mux { + groups = "i2s_am_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_ao_clk_pins: i2s_out_ao_clk { + mux { + groups = "i2s_out_ao_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_lr_clk_pins: i2s_out_lr_clk { + mux { + groups = "i2s_out_lr_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_ch01_pins: i2s_out_ch01 { + mux { + groups = "i2s_out_ch01"; + function = "i2s_out"; + }; + }; + i2sout_ch23_z_pins: i2sout_ch23_z { + mux { + groups = "i2sout_ch23_z"; + function = "i2s_out"; + }; + }; + + i2sout_ch45_z_pins: i2sout_ch45_z { + mux { + groups = "i2sout_ch45_z"; + function = "i2s_out"; + }; + }; + + i2sout_ch67_z_pins: i2sout_ch67_z { + mux { + groups = "i2sout_ch67_z"; + function = "i2s_out"; + }; + }; }; eth-phy-mux { From 9503062d65f5636f41a5d59714f7a5c6844702ae Mon Sep 17 00:00:00 2001 From: jbrunet Date: Sun, 26 Mar 2017 19:19:23 +0200 Subject: [PATCH 128/180] ARM64: dts: meson-gxl: add spdif output pins Add EE and AO domains pins for the spdif output to the gxl device tree. Acked-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 79c230b12fff..f24981a90e87 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -175,6 +175,20 @@ function = "i2s_out_ao"; }; }; + + spdif_out_ao_6_pins: spdif_out_ao_6 { + mux { + groups = "spdif_out_ao_6"; + function = "spdif_out_ao"; + }; + }; + + spdif_out_ao_9_pins: spdif_out_ao_9 { + mux { + groups = "spdif_out_ao_9"; + function = "spdif_out_ao"; + }; + }; }; }; @@ -449,6 +463,13 @@ function = "i2s_out"; }; }; + + spdif_out_h_pins: spdif_out_ao_h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + }; + }; }; eth-phy-mux { From a2940f36a8ff4d7710913f4780d65cc5fa8e8aec Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 18 Nov 2016 12:06:49 -0800 Subject: [PATCH 129/180] arm64: dts: qcom: msm8996: Fixup smp2p node The SMEM state property name changes between the integration branch and mainline, update to use the correct one. Fixes: 2f45d9fcd531 ("arm64: dts: msm8996: Add SMP2P and APCS nodes") Signed-off-by: Bjorn Andersson Reviewed-by: Sarangdhar Joshi Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ed7223d3c8cb..166ad8196bc0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -547,7 +547,7 @@ adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; adsp_smp2p_in: slave-kernel { From 8bfa6eae5ac853ad0e5008c2dcf1f460a8f575dc Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 17 Jan 2017 11:47:55 -0800 Subject: [PATCH 130/180] arm64: dts: qcom: Replace PMU compatible with a53 specific one The PMU on msm8916 is for the cortex-a53 type CPU. Update the compatible to the more specific one so we can get the a53 specific events out of the PMU. Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 68a8e67cba29..93f302682a35 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -157,7 +157,7 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = ; }; From 3f1802f888b75c220d87fb69a5d6681599c0ccf8 Mon Sep 17 00:00:00 2001 From: avaneesh dwivedi Date: Mon, 30 Jan 2017 20:33:09 +0530 Subject: [PATCH 131/180] arm64: dts: msm8996: Add SLPI SMP2P dt node. Add smp2p support to communicate with slpi processor. Signed-off-by: Avaneesh Kumar Dwivedi Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 166ad8196bc0..c9bab80388cd 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -557,5 +557,29 @@ #interrupt-cells = <2>; }; }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = ; + + qcom,ipc = <&apcs 16 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + }; + }; #include "msm8996-pins.dtsi" From 90621b8044bc410773ea92629fc09948b5df85a6 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 30 Jan 2017 08:44:59 -0800 Subject: [PATCH 132/180] arm64: dts: qcom: msm8916: Update hexagon node It's necessary to reference the xo clock and cx supply, so specify these in the node. Also move the Hexagon smd-edge into the hexagon node, to enable SSR. As cxo is not yet available we reference the fixed version of cxo for now, which will work until proper power management is implemented. Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 93f302682a35..ab3093995ded 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -833,8 +833,9 @@ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>; - clock-names = "iface", "bus", "mem"; + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; qcom,smem-states = <&hexagon_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -842,6 +843,7 @@ resets = <&scm 0>; reset-names = "mss_restart"; + cx-supply = <&pm8916_s1>; mx-supply = <&pm8916_l3>; pll-supply = <&pm8916_l7>; @@ -856,6 +858,16 @@ mpss { memory-region = <&mpss_mem>; }; + + smd-edge { + interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; }; pronto: wcnss@a21b000 { @@ -1214,14 +1226,6 @@ }; }; }; - - hexagon { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; - - qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; - qcom,remote-pid = <1>; - }; }; hexagon-smp2p { From 85b85c56950790f45b10a5a3f436575537ab2c94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Horia=20Geant=C4=83?= Date: Tue, 28 Mar 2017 14:46:19 +0300 Subject: [PATCH 133/180] arm64: dts: ls1012a: add crypto node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit LS1012A has a SEC v5.4 security engine. Signed-off-by: Horia Geantă Signed-off-by: Shawn Guo --- .../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 100 +++++++++++++++++- 1 file changed, 99 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 60b533144414..b497ac196ccc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -42,7 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include +#include #include / { @@ -51,6 +51,15 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + crypto = &crypto; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -114,6 +123,95 @@ big-endian; }; + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", + "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x1700000 0x100000>; + reg = <0x00 0x1700000 0x0 0x100000>; + interrupts = ; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = ; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = ; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = ; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = ; + }; + + rtic@60000 { + compatible = "fsl,sec-v5.4-rtic", + "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x60000 0x100 0x60e00 0x18>; + ranges = <0x0 0x60100 0x500>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x100>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x100>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x100>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x400 0x100>; + }; + }; + }; + + sec_mon: sec_mon@1e90000 { + compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon", + "fsl,sec-v4.0-mon"; + reg = <0x0 0x1e90000 0x0 0x10000>; + interrupts = , + ; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1012a-dcfg", "syscon"; From 7a5d73479fe46532783dcf97e751e15bab385576 Mon Sep 17 00:00:00 2001 From: Harninder Rai Date: Tue, 28 Mar 2017 22:03:08 +0530 Subject: [PATCH 134/180] arm64: dts: Add support for FSL's LS1088A SoC LS1088A contains eight ARM v8 CortexA53 processor cores with 32 KB L1-D cache and 32 KB L1-I cache Features summary Eight 32-bit / 64-bit ARM v8 Cortex-A53 CPUs - Arranged as two clusters of four cores sharing a 1 MB L2 cache - Speed Up to 1.5 GHz - Support for cluster power-gating. Cache coherent interconnect (CCI-400) - Hardware-managed data coherency - Up to 700 MHz One 64-bit DDR4 SDRAM memory controller with ECC Data path acceleration architecture 2.0 (DPAA2) Three PCIe 3.0 controllers One serial ATA (SATA 3.0) controller Three high-speed USB 3.0 controllers with integrated PHY Following levels of DTSI/DTS files have been created for the LS1088A SoC family: - fsl-ls1088a.dtsi: DTS-Include file for NXP LS1088A SoC. - fsl-ls1088a-qds.dts: DTS file for NXP LS1088A QDS board. - fsl-ls1088a-rdb.dts: DTS file for NXP LS1088A RDB board Signed-off-by: Harninder Rai Signed-off-by: Ashish Kumar Signed-off-by: Raghav Dogra ` Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/Makefile | 2 + .../boot/dts/freescale/fsl-ls1088a-qds.dts | 123 ++++++++ .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 107 +++++++ .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 275 ++++++++++++++++++ 4 files changed, 507 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6d5df45bd705..72c4b525726f 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts new file mode 100644 index 000000000000..8c3cae530f8f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -0,0 +1,123 @@ +/* + * Device Tree file for NXP LS1088A QDS Board. + * + * Copyright 2017 NXP + * + * Harninder Rai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "LS1088A QDS Board"; + compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts new file mode 100644 index 000000000000..8a04fbb25cb4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -0,0 +1,107 @@ +/* + * Device Tree file for NXP LS1088A RDB Board. + * + * Copyright 2017 NXP + * + * Harninder Rai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "L1088A RDB Board"; + compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi new file mode 100644 index 000000000000..2946fd797121 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -0,0 +1,275 @@ +/* + * Device Tree Include file for NXP Layerscape-1088A family SoC. + * + * Copyright 2017 NXP + * + * Harninder Rai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include + +/ { + compatible = "fsl,ls1088a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* We have 2 clusters having 4 Cortex-A53 cores each */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clocks = <&clockgen 1 0>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clocks = <&clockgen 1 0>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + clocks = <&clockgen 1 1>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + clocks = <&clockgen 1 1>; + }; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ + interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1300000 { + compatible = "fsl,ls1088a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ifc: ifc@2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "disabled"; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + }; + +}; From 1b0c105b7f4d11f251b57b68e45ed65dadd1b209 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Wed, 1 Feb 2017 02:24:24 -0800 Subject: [PATCH 135/180] arm64: dts: apq8016-sbc: Add ramoops Declare a ramoops memory segment to aid debugging for those without UART access. Verified to carry console log when holding volume down for 15 seconds. No memory region for ramoops-like support was found downstream, so the arbitrarily picked region is the last MB of System RAM. Cc: John Stultz Cc: Mart Raudsepp Cc: Stephen Boyd Signed-off-by: Bjorn Andersson Acked-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index eac5389f2f38..a17f5b9a5de6 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -35,6 +35,17 @@ stdout-path = "serial0"; }; + reserved-memory { + ramoops@bff00000{ + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + soc { dma@7884000 { status = "okay"; From 27414e41ba5f1477c5344aff4d9e6fdb4547c320 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 17 Feb 2017 00:53:23 -0800 Subject: [PATCH 136/180] arm64: dts: qcom: pm8994: Add rtc node Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/pm8994.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 0f1866024ae3..b413e44fd09e 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -9,6 +9,13 @@ #address-cells = <1>; #size-cells = <0>; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pm8994_gpios: gpios@c000 { compatible = "qcom,pm8994-gpio"; reg = <0xc000>; From 6c8583d6feeb45a4c812114f6087e9911b93ea48 Mon Sep 17 00:00:00 2001 From: "spjoshi@codeaurora.org" Date: Wed, 18 Jan 2017 19:31:53 -0800 Subject: [PATCH 137/180] arm64: dts: msm8996: Add ADSP PIL node Add ADSP node required for Qualcomm ADSP Peripheral Image Loader. Signed-off-by: Sarangdhar Joshi Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c9bab80388cd..9bc9c857a000 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -534,6 +534,26 @@ }; }; + adsp-pil { + compatible = "qcom,msm8996-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + }; + adsp-smp2p { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; From 8aac4bc5196b7137aa9354dee5703f7dfe4300aa Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Wed, 15 Mar 2017 20:11:00 +0000 Subject: [PATCH 138/180] dt-bindings: Add arm64 ARCH_THUNDER2 platform documentation Add documentation for Cavium's ThunderX2 CN99XX ARM64 processor. This SoC will use "cavium,thunderx2-cn9900" as the compatible property. Also add a documentation entry for the "cavium,thunder2" cpu core present in these SoCs. Signed-off-by: Jayachandran C Acked-by: Rob Herring Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/cavium-thunder2.txt | 8 ++++++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + 2 files changed, 9 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/cavium-thunder2.txt diff --git a/Documentation/devicetree/bindings/arm/cavium-thunder2.txt b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt new file mode 100644 index 000000000000..dc5dd65cbce7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cavium-thunder2.txt @@ -0,0 +1,8 @@ +Cavium ThunderX2 CN99XX platform tree bindings +---------------------------------------------- + +Boards with Cavium ThunderX2 CN99XX SoC shall have the root property: + compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc"; + +These SoC uses the "cavium,thunder2" core which will be compatible +with "brcm,vulcan". diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 698ad1f097fa..1030f5f50207 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -170,6 +170,7 @@ nodes to be present and contain the properties described below. "brcm,brahma-b15" "brcm,vulcan" "cavium,thunder" + "cavium,thunder2" "faraday,fa526" "intel,sa110" "intel,sa1100" From 517b311eaec9fd3c6ae870f189157115d82ae8fb Mon Sep 17 00:00:00 2001 From: Jayachandran C Date: Tue, 14 Mar 2017 12:47:14 +0000 Subject: [PATCH 139/180] arm64: dts: move from ARCH_VULCAN to ARCH_THUNDER2 Move and update device tree files as part of transition from Broadcom Vulcan to Cavium ThunderX2. The changes are to: * rename dts/broadcom/vulcan.dtsi to cavium/thunder2-99xx.dtsi, update cpu cores to be "cavium,thunder2", and update SoC to be "cavium,thunderx2-cn9900" * move SoC dts/broadcom/vulcan-eval.dtsi to cavium/thunder2-99xx.dtsi and update board name string * Update dts/broadcom/Makefile not to build vulcan dtbs * Update dts/cavium/Makefile to build thunder2 dtbs No changes to the dts contents except the updated "compatible" and "model" properties. Signed-off-by: Jayachandran C Reviewed-by: Matthias Brugger Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/broadcom/Makefile | 1 - arch/arm64/boot/dts/cavium/Makefile | 1 + .../vulcan-eval.dts => cavium/thunder2-99xx.dts} | 9 +++++---- .../vulcan.dtsi => cavium/thunder2-99xx.dtsi} | 15 ++++++++------- 4 files changed, 14 insertions(+), 12 deletions(-) rename arch/arm64/boot/dts/{broadcom/vulcan-eval.dts => cavium/thunder2-99xx.dts} (72%) rename arch/arm64/boot/dts/{broadcom/vulcan.dtsi => cavium/thunder2-99xx.dtsi} (88%) diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index f1caece9d3a7..bfa8f8e4c5af 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,5 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb -dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile index e34f89ddabb2..581b2c1c400a 100644 --- a/arch/arm64/boot/dts/cavium/Makefile +++ b/arch/arm64/boot/dts/cavium/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb +dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts similarity index 72% rename from arch/arm64/boot/dts/broadcom/vulcan-eval.dts rename to arch/arm64/boot/dts/cavium/thunder2-99xx.dts index 9ee8d3da0e3f..6c6fb8692fde 100644 --- a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts @@ -1,6 +1,7 @@ /* - * dts file for Broadcom (BRCM) Vulcan Evaluation Platform + * dts file for Cavium ThunderX2 CN99XX Evaluation Platform * + * Copyright (c) 2017 Cavium Inc. * Copyright (c) 2013-2016 Broadcom * * This program is free software; you can redistribute it and/or @@ -11,11 +12,11 @@ /dts-v1/; -#include "vulcan.dtsi" +#include "thunder2-99xx.dtsi" / { - model = "Broadcom Vulcan Eval Platform"; - compatible = "brcm,vulcan-eval", "brcm,vulcan-soc"; + model = "Cavium ThunderX2 CN99XX"; + compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc"; memory { device_type = "memory"; diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi similarity index 88% rename from arch/arm64/boot/dts/broadcom/vulcan.dtsi rename to arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index 34e11a9db2a0..4220fbdcb24a 100644 --- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -1,6 +1,7 @@ /* - * dtsi file for Broadcom (BRCM) Vulcan processor + * dtsi file for Cavium ThunderX2 CN99XX processor * + * Copyright (c) 2017 Cavium Inc. * Copyright (c) 2013-2016 Broadcom * Author: Zi Shen Lim * @@ -13,8 +14,8 @@ #include / { - model = "Broadcom Vulcan"; - compatible = "brcm,vulcan-soc"; + model = "Cavium ThunderX2 CN99XX"; + compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -26,28 +27,28 @@ cpu@0 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu@1 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu@2 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu@3 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; }; From dc10ef2dfd66fc215857f4777b3a2a030d08193a Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 21 Mar 2017 21:03:11 -0500 Subject: [PATCH 140/180] arm64: dts: juno: fix PCI bus dtc warnings dtc recently added PCI bus checks. Fix these warnings. Signed-off-by: Rob Herring Cc: Lorenzo Pieralisi Acked-by: Liviu Dudau Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index df539e865b90..8ffaff2043d0 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -428,7 +428,7 @@ }; }; - pcie_ctlr: pcie-controller@40000000 { + pcie_ctlr: pcie@40000000 { compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; device_type = "pci"; reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ From 124248e2fdd6efe6ad548395c8d7c6f6c1de9b46 Mon Sep 17 00:00:00 2001 From: Harninder Rai Date: Thu, 9 Feb 2017 16:33:49 +0530 Subject: [PATCH 141/180] dt-bindings: clockgen: Add compatible string for LS1088A Signed-off-by: Harninder Rai Acked-by: Rob Herring Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/clock/qoriq-clock.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt index aa3526f229a7..6ed469c66b32 100644 --- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -35,6 +35,7 @@ Required properties: * "fsl,ls1021a-clockgen" * "fsl,ls1043a-clockgen" * "fsl,ls1046a-clockgen" + * "fsl,ls1088a-clockgen" * "fsl,ls2080a-clockgen" Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks From 6678254bb4a46dc47620f993a4b71480a3c56ee4 Mon Sep 17 00:00:00 2001 From: Harninder Rai Date: Thu, 9 Feb 2017 16:34:11 +0530 Subject: [PATCH 142/180] dt-bindings: arm: Add entry for FSL LS1088A RDB, QDS boards Signed-off-by: Harninder Rai Acked-by: Rob Herring Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/arm/fsl.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 645e8ff8e132..cdb9dd705754 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -179,6 +179,18 @@ LS1046A ARMv8 based RDB Board Required root node properties: - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; +LS1088A SoC +Required root node properties: + - compatible = "fsl,ls1088a"; + +LS1088A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; + +LS1088A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; + LS2080A SoC Required root node properties: - compatible = "fsl,ls2080a"; From dfd7a3845a577e2350305609838bf31c08e4dec1 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Thu, 30 Mar 2017 18:28:28 +0900 Subject: [PATCH 143/180] arm64: tegra: Add GPU node for Tegra186 Add the DT node for the GP10B GPU on Tegra186. Signed-off-by: Alexandre Courbot Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 3ea5e6369bc3..5e62e68ac053 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -2,6 +2,7 @@ #include #include #include +#include #include / { @@ -347,6 +348,24 @@ reg-names = "pmc", "wake", "aotag", "scratch"; }; + gpu@17000000 { + compatible = "nvidia,gp10b"; + reg = <0x0 0x17000000 0x0 0x1000000>, + <0x0 0x18000000 0x0 0x1000000>; + interrupts = ; + interrupt-names = "stall", "nonstall"; + + clocks = <&bpmp TEGRA186_CLK_GPCCLK>, + <&bpmp TEGRA186_CLK_GPU>; + clock-names = "gpu", "pwr"; + resets = <&bpmp TEGRA186_RESET_GPU>; + reset-names = "gpu"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; + }; + sysram@30000000 { compatible = "nvidia,tegra186-sysram", "mmio-sram"; reg = <0x0 0x30000000 0x0 0x50000>; From 18236a14883b718ce973e4c090db6ecb49b38287 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Tue, 28 Mar 2017 13:42:57 +0100 Subject: [PATCH 144/180] arm64: tegra: Update the Tegra132 flowctrl compatible string Update the Tegra132 flowctrl compatible string to include "nvidia,tegra132-flowctrl" so it is aligned with the flowctrl binding documentation. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 3f3a46a4bd01..2b17936ac5be 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -224,7 +224,7 @@ }; flow-controller@60007000 { - compatible = "nvidia,tegra124-flowctrl"; + compatible = "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl"; reg = <0x0 0x60007000 0x0 0x1000>; }; From 09047cf4bc123f9b85e7019ae6f275f9de220ee5 Mon Sep 17 00:00:00 2001 From: Liang Chen Date: Mon, 27 Mar 2017 17:40:47 +0800 Subject: [PATCH 145/180] dt-bindings: add binding for rk3328-grf This adds the compatible for the General Register Files on the new rk3328. Signed-off-by: Liang Chen Acked-by: Rob Herring Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/soc/rockchip/grf.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index a0685c209218..de8b983f2ccd 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -16,6 +16,7 @@ Required Properties: - "rockchip,rk3188-grf", "syscon": for rk3188 - "rockchip,rk3228-grf", "syscon": for rk3228 - "rockchip,rk3288-grf", "syscon": for rk3288 + - "rockchip,rk3328-grf", "syscon": for rk3328 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 - compatible: PMUGRF should be one of the following: From 791a9e001d3ba3b552888b0bf3c592a50b71f57e Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 4 Apr 2017 17:50:58 +0800 Subject: [PATCH 146/180] arm64: allwinner: a64: add r_ccu node A64 SoC have a CCU (r_ccu) in PRCM block. Add the device node for it. The mux 3 of R_CCU is an internal oscillator, which is 16MHz according to the user manual, and has only 30% accuracy based on our experience on older SoCs. The real mesaured value of it on two Pine64 boards is around 11MHz, which is around 70% of 16MHz. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 1c64ea2d23f9..1d4e5bcced0c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -98,6 +98,14 @@ clock-output-names = "osc32k"; }; + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -392,5 +400,14 @@ interrupts = , ; }; + + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; }; From ec4279053a6434f685246e022be95d2a62f8c608 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 4 Apr 2017 17:51:00 +0800 Subject: [PATCH 147/180] arm64: allwinner: a64: add R_PIO pinctrl node Allwinner A64 have a dedicated pin controller to manage the PL pin bank. As the driver and the required clock support are added, add the device node for it. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 1d4e5bcced0c..6bc606b4d74d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -409,5 +409,17 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun50i-a64-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = ; + clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + }; }; }; From d7bb5b966174fee6e4b0085124b75787a5d81b8a Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 4 Apr 2017 17:50:59 +0800 Subject: [PATCH 148/180] ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu Now we have driver for the PRCM CCU, switch to use it instead of old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi . The mux 3 of R_CCU is still the internal oscillator, which is said to be 16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my two H3 boards and one H5 board. Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 45 ++++++++++-------------------- 1 file changed, 14 insertions(+), 31 deletions(-) diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 6640ebfa6419..1aeeacb3a884 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -68,31 +68,12 @@ clock-output-names = "osc32k"; }; - apb0: apb0_clk { - compatible = "fixed-factor-clock"; + iosc: internal-osc-clk { #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01f01428 { - compatible = "allwinner,sun8i-h3-apb0-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01f01428 0x4>; - #clock-cells = <1>; - clocks = <&apb0>; - clock-indices = <0>, <1>; - clock-output-names = "apb0_pio", "apb0_ir"; - }; - - ir_clk: ir_clk@01f01454 { - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01f01454 0x4>; - #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>; - clock-output-names = "ir"; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; }; }; @@ -576,9 +557,12 @@ ; }; - apb0_reset: reset@01f014b0 { - reg = <0x01f014b0 0x4>; - compatible = "allwinner,sun6i-a31-clock-reset"; + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; #reset-cells = <1>; }; @@ -589,9 +573,9 @@ ir: ir@01f02000 { compatible = "allwinner,sun5i-a13-ir"; - clocks = <&apb0_gates 1>, <&ir_clk>; + clocks = <&r_ccu 4>, <&r_ccu 11>; clock-names = "apb", "ir"; - resets = <&apb0_reset 1>; + resets = <&r_ccu 0>; interrupts = ; reg = <0x01f02000 0x40>; status = "disabled"; @@ -601,9 +585,8 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = ; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; - resets = <&apb0_reset 0>; gpio-controller; #gpio-cells = <3>; interrupt-controller; From 52e02d377a7282ae57052c222cdaacf45ddc4c5d Mon Sep 17 00:00:00 2001 From: Liang Chen Date: Mon, 27 Mar 2017 17:40:48 +0800 Subject: [PATCH 149/180] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs This patch adds core dtsi file for Rockchip RK3328 SoCs. Signed-off-by: Liang Chen Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1264 ++++++++++++++++++++++ 1 file changed, 1264 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3328.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi new file mode 100644 index 000000000000..7e69f1fe78d6 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -0,0 +1,1264 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + compatible = "rockchip,rk3328"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac: dmac@ff1f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff1f0000 0x0 0x4000>; + interrupts = , + ; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: syscon@ff100000 { + compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff100000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + power: power-controller { + compatible = "rockchip,rk3328-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_hevc@RK3328_PD_HEVC { + reg = ; + }; + pd_video@RK3328_PD_VIDEO { + reg = ; + }; + pd_vpu@RK3328_PD_VPU { + reg = ; + }; + }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x5c8>; + mode-normal = ; + mode-recovery = ; + mode-bootloader = ; + mode-loader = ; + }; + + }; + + uart0: serial@ff110000 { + compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff110000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 2>, <&dmac 3>; + #dma-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@ff120000 { + compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff120000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "sclk_uart", "pclk_uart"; + dmas = <&dmac 4>, <&dmac 5>; + #dma-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@ff130000 { + compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff130000 0x0 0x100>; + interrupts = ; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 6>, <&dmac 7>; + #dma-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c0: i2c@ff150000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff150000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + i2c1: i2c@ff160000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff160000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c2: i2c@ff170000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff170000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + i2c3: i2c@ff180000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff180000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + spi0: spi@ff190000 { + compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff190000 0x0 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac 8>, <&dmac 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>; + status = "disabled"; + }; + + wdt: watchdog@ff1a0000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff1a0000 0x0 0x100>; + interrupts = ; + }; + + saradc: adc@ff280000 { + compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff280000 0x0 0x100>; + interrupts = ; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon"; + reg = <0x0 0xff440000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = + /* + * CPLL should run at 1200, but that is to high for + * the initial dividers of most of its children. + * We need set cpll child clk div first, + * and then set the cpll frequency. + */ + <&cru DCLK_LCDC>, <&cru SCLK_PDM>, + <&cru SCLK_RTC32K>, <&cru SCLK_UART0>, + <&cru SCLK_UART1>, <&cru SCLK_UART2>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>, + <&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>, + <&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>, + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>, + <&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>, + <&cru SCLK_SDIO>, <&cru SCLK_TSP>, + <&cru SCLK_WIFI>, <&cru ARMCLK>, + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>, + <&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_PERI>, <&cru PCLK_PERI>, + <&cru SCLK_RTC32K>; + assigned-clock-parents = + <&cru HDMIPHY>, <&cru PLL_APLL>, + <&cru PLL_GPLL>, <&xin24m>, + <&xin24m>, <&xin24m>; + assigned-clock-rates = + <0>, <61440000>, + <0>, <24000000>, + <24000000>, <24000000>, + <15000000>, <15000000>, + <100000000>, <100000000>, + <100000000>, <100000000>, + <50000000>, <100000000>, + <100000000>, <100000000>, + <50000000>, <50000000>, + <50000000>, <50000000>, + <24000000>, <600000000>, + <491520000>, <1200000000>, + <150000000>, <75000000>, + <75000000>, <150000000>, + <75000000>, <75000000>, + <32768>; + }; + + gmac2io: ethernet@ff540000 { + compatible = "rockchip,rk3328-gmac"; + reg = <0x0 0xff540000 0x0 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>, + <&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>, + <&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>, + <&cru PCLK_MAC2IO>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + resets = <&cru SRST_GMAC2IO_A>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + gic: interrupt-controller@ff811000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xff811000 0 0x1000>, + <0x0 0xff812000 0 0x2000>, + <0x0 0xff814000 0 0x2000>, + <0x0 0xff816000 0 0x2000>; + interrupts = ; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3328-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff210000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff210000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>, + <2 RK_PA5 2 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>, + <0 RK_PA6 2 &pcfg_pull_none>; + }; + i2c3_gpio: i2c3-gpio { + rockchip,pins = + <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi_i2c { + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>, + <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>, + <1 RK_PB0 1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>, + <3 RK_PA6 4 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>; + }; + + uart1_rts_gpio: uart1-rts-gpio { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart2-0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>, + <1 RK_PA1 2 &pcfg_pull_none>; + }; + }; + + uart2-1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>, + <2 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + spi0-0 { + spi0m0_clk: spi0m0-clk { + rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>; + }; + + spi0m0_cs0: spi0m0-cs0 { + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>; + }; + + spi0m0_tx: spi0m0-tx { + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>; + }; + + spi0m0_rx: spi0m0-rx { + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>; + }; + + spi0m0_cs1: spi0m0-cs1 { + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>; + }; + }; + + spi0-1 { + spi0m1_clk: spi0m1-clk { + rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>; + }; + + spi0m1_cs0: spi0m1-cs0 { + rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>; + }; + + spi0m1_tx: spi0m1-tx { + rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>; + }; + + spi0m1_rx: spi0m1-rx { + rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>; + }; + + spi0m1_cs1: spi0m1-cs1 { + rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>; + }; + }; + + spi0-2 { + spi0m2_clk: spi0m2-clk { + rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>; + }; + + spi0m2_cs0: spi0m2-cs0 { + rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>; + }; + + spi0m2_tx: spi0m2-tx { + rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>; + }; + + spi0m2_rx: spi0m2-rx { + rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>; + }; + }; + + i2s1 { + i2s1_mclk: i2s1-mclk { + rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s1_sclk: i2s1-sclk { + rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>; + }; + + i2s1_lrckrx: i2s1-lrckrx { + rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>; + }; + + i2s1_lrcktx: i2s1-lrcktx { + rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>; + }; + + i2s1_sdi: i2s1-sdi { + rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>; + }; + + i2s1_sdo: i2s1-sdo { + rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; + }; + + i2s1_sdio1: i2s1-sdio1 { + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>; + }; + + i2s1_sdio2: i2s1-sdio2 { + rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s1_sdio3: i2s1-sdio3 { + rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>; + }; + + i2s1_sleep: i2s1-sleep { + rockchip,pins = + <2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + i2s2-0 { + i2s2m0_mclk: i2s2m0-mclk { + rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s2m0_sclk: i2s2m0-sclk { + rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>; + }; + + i2s2m0_lrckrx: i2s2m0-lrckrx { + rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>; + }; + + i2s2m0_lrcktx: i2s2m0-lrcktx { + rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>; + }; + + i2s2m0_sdi: i2s2m0-sdi { + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>; + }; + + i2s2m0_sdo: i2s2m0-sdo { + rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>; + }; + + i2s2m0_sleep: i2s2m0-sleep { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + i2s2-1 { + i2s2m1_mclk: i2s2m1-mclk { + rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s2m1_sclk: i2s2m1-sclk { + rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>; + }; + + i2s2m1_lrckrx: i2sm1-lrckrx { + rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>; + }; + + i2s2m1_lrcktx: i2s2m1-lrcktx { + rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>; + }; + + i2s2m1_sdi: i2s2m1-sdi { + rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>; + }; + + i2s2m1_sdo: i2s2m1-sdo { + rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>; + }; + + i2s2m1_sleep: i2s2m1-sleep { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + spdif-0 { + spdifm0_tx: spdifm0-tx { + rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; + }; + }; + + spdif-1 { + spdifm1_tx: spdifm1-tx { + rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + spdif-2 { + spdifm2_tx: spdifm2-tx { + rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + sdmmc0-0 { + sdmmc0m0_pwren: sdmmc0m0-pwren { + rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0m0_gpio: sdmmc0m0-gpio { + rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc0-1 { + sdmmc0m1_pwren: sdmmc0m1-pwren { + rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0m1_gpio: sdmmc0m1-gpio { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc0 { + sdmmc0_clk: sdmmc0-clk { + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc0_cmd: sdmmc0-cmd { + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_dectn: sdmmc0-dectn { + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_wrprt: sdmmc0-wrprt { + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_bus1: sdmmc0-bus1 { + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_bus4: sdmmc0-bus4 { + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>, + <1 RK_PA1 1 &pcfg_pull_up_4ma>, + <1 RK_PA2 1 &pcfg_pull_up_4ma>, + <1 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_gpio: sdmmc0-gpio { + rockchip,pins = + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc0ext { + sdmmc0ext_clk: sdmmc0ext-clk { + rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>; + }; + + sdmmc0ext_cmd: sdmmc0ext-cmd { + rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_wrprt: sdmmc0ext-wrprt { + rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_dectn: sdmmc0ext-dectn { + rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_bus1: sdmmc0ext-bus1 { + rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_bus4: sdmmc0ext-bus4 { + rockchip,pins = + <3 RK_PA4 3 &pcfg_pull_up_4ma>, + <3 RK_PA5 3 &pcfg_pull_up_4ma>, + <3 RK_PA6 3 &pcfg_pull_up_4ma>, + <3 RK_PA7 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_gpio: sdmmc0ext-gpio { + rockchip,pins = + <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc1 { + sdmmc1_clk: sdmmc1-clk { + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>; + }; + + sdmmc1_cmd: sdmmc1-cmd { + rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_pwren: sdmmc1-pwren { + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_wrprt: sdmmc1-wrprt { + rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_dectn: sdmmc1-dectn { + rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_bus1: sdmmc1-bus1 { + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_bus4: sdmmc1-bus4 { + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>, + <1 RK_PB7 1 &pcfg_pull_up_8ma>, + <1 RK_PC0 1 &pcfg_pull_up_8ma>, + <1 RK_PC1 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_gpio: sdmmc1-gpio { + rockchip,pins = + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>; + }; + + emmc_rstnout: emmc-rstnout { + rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <0 RK_PA7 2 &pcfg_pull_up_12ma>, + <2 RK_PD4 2 &pcfg_pull_up_12ma>, + <2 RK_PD5 2 &pcfg_pull_up_12ma>, + <2 RK_PD6 2 &pcfg_pull_up_12ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <0 RK_PA7 2 &pcfg_pull_up_12ma>, + <2 RK_PD4 2 &pcfg_pull_up_12ma>, + <2 RK_PD5 2 &pcfg_pull_up_12ma>, + <2 RK_PD6 2 &pcfg_pull_up_12ma>, + <2 RK_PD7 2 &pcfg_pull_up_12ma>, + <3 RK_PC0 2 &pcfg_pull_up_12ma>, + <3 RK_PC1 2 &pcfg_pull_up_12ma>, + <3 RK_PC2 2 &pcfg_pull_up_12ma>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + pwmir { + pwmir_pin: pwmir-pin { + rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>; + }; + }; + + gmac-1 { + rgmiim1_pins: rgmiim1-pins { + rockchip,pins = + /* mac_txclk */ + <1 RK_PB4 2 &pcfg_pull_none_12ma>, + /* mac_rxclk */ + <1 RK_PB5 2 &pcfg_pull_none_2ma>, + /* mac_mdio */ + <1 RK_PC3 2 &pcfg_pull_none_2ma>, + /* mac_txen */ + <1 RK_PD1 2 &pcfg_pull_none_12ma>, + /* mac_clk */ + <1 RK_PC5 2 &pcfg_pull_none_2ma>, + /* mac_rxdv */ + <1 RK_PC6 2 &pcfg_pull_none_2ma>, + /* mac_mdc */ + <1 RK_PC7 2 &pcfg_pull_none_2ma>, + /* mac_rxd1 */ + <1 RK_PB2 2 &pcfg_pull_none_2ma>, + /* mac_rxd0 */ + <1 RK_PB3 2 &pcfg_pull_none_2ma>, + /* mac_txd1 */ + <1 RK_PB0 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PB1 2 &pcfg_pull_none_12ma>, + /* mac_rxd3 */ + <1 RK_PB6 2 &pcfg_pull_none_2ma>, + /* mac_rxd2 */ + <1 RK_PB7 2 &pcfg_pull_none_2ma>, + /* mac_txd3 */ + <1 RK_PC0 2 &pcfg_pull_none_12ma>, + /* mac_txd2 */ + <1 RK_PC1 2 &pcfg_pull_none_12ma>, + + /* mac_txclk */ + <0 RK_PB0 1 &pcfg_pull_none>, + /* mac_txen */ + <0 RK_PB4 1 &pcfg_pull_none>, + /* mac_clk */ + <0 RK_PD0 1 &pcfg_pull_none>, + /* mac_txd1 */ + <0 RK_PC0 1 &pcfg_pull_none>, + /* mac_txd0 */ + <0 RK_PC1 1 &pcfg_pull_none>, + /* mac_txd3 */ + <0 RK_PC7 1 &pcfg_pull_none>, + /* mac_txd2 */ + <0 RK_PC6 1 &pcfg_pull_none>; + }; + + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_mdio */ + <1 RK_PC3 2 &pcfg_pull_none_2ma>, + /* mac_txen */ + <1 RK_PD1 2 &pcfg_pull_none_12ma>, + /* mac_clk */ + <1 RK_PC5 2 &pcfg_pull_none_2ma>, + /* mac_rxer */ + <1 RK_PD0 2 &pcfg_pull_none_2ma>, + /* mac_rxdv */ + <1 RK_PC6 2 &pcfg_pull_none_2ma>, + /* mac_mdc */ + <1 RK_PC7 2 &pcfg_pull_none_2ma>, + /* mac_rxd1 */ + <1 RK_PB2 2 &pcfg_pull_none_2ma>, + /* mac_rxd0 */ + <1 RK_PB3 2 &pcfg_pull_none_2ma>, + /* mac_txd1 */ + <1 RK_PB0 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PB1 2 &pcfg_pull_none_12ma>, + + /* mac_mdio */ + <0 RK_PB3 1 &pcfg_pull_none>, + /* mac_txen */ + <0 RK_PB4 1 &pcfg_pull_none>, + /* mac_clk */ + <0 RK_PD0 1 &pcfg_pull_none>, + /* mac_mdc */ + <0 RK_PC3 1 &pcfg_pull_none>, + /* mac_txd1 */ + <0 RK_PC0 1 &pcfg_pull_none>, + /* mac_txd0 */ + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + gmac2phy { + fephyled_speed100: fephyled-speed100 { + rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>; + }; + + fephyled_speed10: fephyled-speed10 { + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>; + }; + + fephyled_duplex: fephyled-duplex { + rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>; + }; + + fephyled_rxm0: fephyled-rxm0 { + rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>; + }; + + fephyled_txm0: fephyled-txm0 { + rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>; + }; + + fephyled_linkm0: fephyled-linkm0 { + rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>; + }; + + fephyled_rxm1: fephyled-rxm1 { + rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>; + }; + + fephyled_txm1: fephyled-txm1 { + rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>; + }; + + fephyled_linkm1: fephyled-linkm1 { + rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>; + }; + }; + + tsadc_pin { + tsadc_int: tsadc-int { + rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>; + }; + tsadc_gpio: tsadc-gpio { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi_pin { + hdmi_cec: hdmi-cec { + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>; + }; + + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>; + }; + }; + + cif-0 { + dvp_d2d9_m0:dvp-d2d9-m0 { + rockchip,pins = + /* cif_d0 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* cif_d1 */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* cif_d2 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* cif_d3 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* cif_d4 */ + <3 RK_PB0 2 &pcfg_pull_none>, + /* cif_d5m0 */ + <3 RK_PB1 2 &pcfg_pull_none>, + /* cif_d6m0 */ + <3 RK_PB2 2 &pcfg_pull_none>, + /* cif_d7m0 */ + <3 RK_PB3 2 &pcfg_pull_none>, + /* cif_href */ + <3 RK_PA1 2 &pcfg_pull_none>, + /* cif_vsync */ + <3 RK_PA0 2 &pcfg_pull_none>, + /* cif_clkoutm0 */ + <3 RK_PA3 2 &pcfg_pull_none>, + /* cif_clkin */ + <3 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + cif-1 { + dvp_d2d9_m1:dvp-d2d9-m1 { + rockchip,pins = + /* cif_d0 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* cif_d1 */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* cif_d2 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* cif_d3 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* cif_d4 */ + <3 RK_PB0 2 &pcfg_pull_none>, + /* cif_d5m1 */ + <2 RK_PC0 4 &pcfg_pull_none>, + /* cif_d6m1 */ + <2 RK_PC1 4 &pcfg_pull_none>, + /* cif_d7m1 */ + <2 RK_PC2 4 &pcfg_pull_none>, + /* cif_href */ + <3 RK_PA1 2 &pcfg_pull_none>, + /* cif_vsync */ + <3 RK_PA0 2 &pcfg_pull_none>, + /* cif_clkoutm1 */ + <2 RK_PB7 4 &pcfg_pull_none>, + /* cif_clkin */ + <3 RK_PA2 2 &pcfg_pull_none>; + }; + }; + }; +}; From 27a9fac7b33d7082f8ea9c233c7260978bcc6065 Mon Sep 17 00:00:00 2001 From: Liang Chen Date: Mon, 27 Mar 2017 17:46:23 +0800 Subject: [PATCH 150/180] dt-bindings: document rockchip rk3328-evb board Use "rockchip,rk3328-evb" compatible string for Rockchip RK3328 evaluation board. Signed-off-by: Liang Chen Acked-by: Rob Herring Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index cc4ace6397ab..a0c5a06dee4e 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -134,6 +134,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; +- Rockchip RK3328 evb: + Required root node properties: + - compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; + - Rockchip RK3399 evb: Required root node properties: - compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; From 0c1f8546753f1d44897ebfe49f7442001a466379 Mon Sep 17 00:00:00 2001 From: Liang Chen Date: Mon, 27 Mar 2017 17:40:49 +0800 Subject: [PATCH 151/180] arm64: dts: rockchip: add RK3328 eavluation board devicetree This patch add rk3328-evb.dts for RK3328 evaluation board. Tested on RK3328 evb. Signed-off-by: Liang Chen Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/Makefile | 1 + arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 57 +++++++++++++++++++++ 2 files changed, 58 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-evb.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 3a862894ea44..d09ea3c7ea12 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts new file mode 100644 index 000000000000..cf272392cebf --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Rockchip RK3328 EVB"; + compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart2 { + status = "okay"; +}; From 28f6c58367592afdea77a23d5c6a6f6603a632a5 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 9 Mar 2017 11:41:54 +0100 Subject: [PATCH 152/180] dt-bindings: clk: gxbb: expose i2s output clock gates Signed-off-by: Jerome Brunet Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20170309104154.28295-10-jbrunet@baylibre.com --- drivers/clk/meson/gxbb.h | 10 +++++----- include/dt-bindings/clock/gxbb-clkc.h | 5 +++++ 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index 8ee2022ce5d5..274f58764853 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -206,16 +206,16 @@ #define CLKID_I2S_SPDIF 35 /* CLKID_ETH */ #define CLKID_DEMUX 37 -#define CLKID_AIU_GLUE 38 +/* CLKID_AIU_GLUE */ #define CLKID_IEC958 39 -#define CLKID_I2S_OUT 40 +/* CLKID_I2S_OUT */ #define CLKID_AMCLK 41 #define CLKID_AIFIFO2 42 #define CLKID_MIXER 43 -#define CLKID_MIXER_IFACE 44 +/* CLKID_MIXER_IFACE */ #define CLKID_ADC 45 #define CLKID_BLKMV 46 -#define CLKID_AIU 47 +/* CLKID_AIU */ #define CLKID_UART1 48 #define CLKID_G2D 49 /* CLKID_USB0 */ @@ -248,7 +248,7 @@ /* CLKID_GCLK_VENCI_INT0 */ #define CLKID_GCLK_VENCI_INT 78 #define CLKID_DAC_CLK 79 -#define CLKID_AOCLK_GATE 80 +/* CLKID_AOCLK_GATE */ #define CLKID_IEC958_GATE 81 #define CLKID_ENC480P 82 #define CLKID_RNG1 83 diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index 692846c7941b..f08f06dd7702 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -16,6 +16,10 @@ #define CLKID_I2C 22 #define CLKID_SAR_ADC 23 #define CLKID_ETH 36 +#define CLKID_AIU_GLUE 38 +#define CLKID_I2S_OUT 40 +#define CLKID_MIXER_IFACE 44 +#define CLKID_AIU 47 #define CLKID_USB0 50 #define CLKID_USB1 51 #define CLKID_USB 55 @@ -24,6 +28,7 @@ #define CLKID_USB0_DDR_BRIDGE 65 #define CLKID_SANA 69 #define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_AOCLK_GATE 80 #define CLKID_AO_I2C 93 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 From 5c65eec3d943fc3f9f3631e0793d879c27cc0fee Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 22 Mar 2017 11:18:53 +0100 Subject: [PATCH 153/180] clk: meson-gxbb: Add MALI clock IDS Add missing MALI clock IDs and expose the muxes and gates in the dt-bindings. Signed-off-by: Neil Armstrong Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1490177935-9646-2-git-send-email-narmstrong@baylibre.com --- drivers/clk/meson/gxbb.h | 9 ++++++++- include/dt-bindings/clock/gxbb-clkc.h | 5 +++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index 274f58764853..73efdc30fd51 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -268,8 +268,15 @@ /* CLKID_SAR_ADC_CLK */ /* CLKID_SAR_ADC_SEL */ #define CLKID_SAR_ADC_DIV 99 +/* CLKID_MALI_0_SEL */ +#define CLKID_MALI_0_DIV 101 +/* CLKID_MALI_0 */ +/* CLKID_MALI_1_SEL */ +#define CLKID_MALI_1_DIV 104 +/* CLKID_MALI_1 */ +/* CLKID_MALI */ -#define NR_CLKS 100 +#define NR_CLKS 107 /* include the CLKIDs that have been made part of the stable DT binding */ #include diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index f08f06dd7702..ef7d6b792405 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -35,5 +35,10 @@ #define CLKID_SD_EMMC_C 96 #define CLKID_SAR_ADC_CLK 97 #define CLKID_SAR_ADC_SEL 98 +#define CLKID_MALI_0_SEL 100 +#define CLKID_MALI_0 102 +#define CLKID_MALI_1_SEL 103 +#define CLKID_MALI_1 105 +#define CLKID_MALI 106 #endif /* __GXBB_CLKC_H */ From 7d33d60b0c115b02b6fe2af374daf2401e4abe91 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 22 Mar 2017 11:32:26 +0100 Subject: [PATCH 154/180] clk: meson-gxbb: Expose GP0 dt-bindings clock id This patch exposes the GP0 PLL clock id in the dt bindings. Signed-off-by: Neil Armstrong Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1490178747-14837-5-git-send-email-narmstrong@baylibre.com --- drivers/clk/meson/gxbb.h | 2 +- include/dt-bindings/clock/gxbb-clkc.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h index 73efdc30fd51..e5c49923a24b 100644 --- a/drivers/clk/meson/gxbb.h +++ b/drivers/clk/meson/gxbb.h @@ -177,7 +177,7 @@ /* CLKID_FCLK_DIV4 */ #define CLKID_FCLK_DIV5 7 #define CLKID_FCLK_DIV7 8 -#define CLKID_GP0_PLL 9 +/* CLKID_GP0_PLL */ #define CLKID_MPEG_SEL 10 #define CLKID_MPEG_DIV 11 /* CLKID_CLK81 */ diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index ef7d6b792405..cce6cb5418f1 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -10,6 +10,7 @@ #define CLKID_FCLK_DIV2 4 #define CLKID_FCLK_DIV3 5 #define CLKID_FCLK_DIV4 6 +#define CLKID_GP0_PLL 9 #define CLKID_CLK81 12 #define CLKID_MPLL2 15 #define CLKID_SPI 34 From 92c2cc5d5566cb84e4f4a683e73c3516882c2ee8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 22 Mar 2017 11:32:27 +0100 Subject: [PATCH 155/180] dt-bindings: clock: gxbb-clkc: Add GXL compatible variant Acked-by: Rob Herring Signed-off-by: Neil Armstrong Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/1490178747-14837-6-git-send-email-narmstrong@baylibre.com --- Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index ce06435d28ed..a09d627b5508 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -5,7 +5,8 @@ controllers within the SoC. Required Properties: -- compatible: should be "amlogic,gxbb-clkc" +- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC, + or "amlogic,gxl-clkc" for GXL and GXM SoC. - reg: physical base address of the clock controller and length of memory mapped region. From 62158c6a9c5d2e5b62c6777b9fc1954fca1b7f59 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 14 Feb 2017 22:18:44 +0100 Subject: [PATCH 156/180] ARM64: dts: meson-gxbb-odroidc2: Enable SARADC node Now that 3adbf3427330 "iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs" has added support for the ADC, let's enable it on Odroid C2. Signed-off-by: Heiner Kallweit Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index a8f1f8a00b51..54a9c6a6b392 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -267,6 +267,11 @@ status = "okay"; }; +&saradc { + status = "okay"; + vref-supply = <&vcc1v8>; +}; + /* SD */ &sd_emmc_b { status = "okay"; From e9da72821f4d3bcb90dcda6aed5a1bf2ca39e753 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 21 Mar 2017 16:25:45 +0100 Subject: [PATCH 157/180] ARM64: dts: meson-gx: Add shared CMA dma memory pool The HDMI modes needs more CMA memory to be reserved at boot-time. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 42e2085a7130..8d797e8b7658 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -71,6 +71,14 @@ reg = <0x0 0x10000000 0x0 0x200000>; no-map; }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0xbc00000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; }; cpus { From 6939db7e0dbfb94a4fea47a67f1fcf6234c407a0 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 21 Mar 2017 16:25:46 +0100 Subject: [PATCH 158/180] ARM64: dts: meson-gx: Add support for HDMI output Add HDMI output and connector nodes. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 39 +++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 32 +++++++++++++++ .../dts/amlogic/meson-gxbb-nexbox-a95x.dts | 23 +++++++++++ .../boot/dts/amlogic/meson-gxbb-p20x.dtsi | 23 +++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 12 ++++++ .../amlogic/meson-gxl-s905x-nexbox-a95x.dts | 23 +++++++++++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 13 +++++++ .../boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 23 +++++++++++ arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 3 ++ 9 files changed, 191 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 7a078bef04cd..a84e27622639 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -98,6 +98,27 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -188,3 +209,21 @@ ðmac { status = "okay"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 8d797e8b7658..358eef97ec95 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -487,6 +487,38 @@ cvbs_vdac_port: port@0 { reg = <0>; }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + + hdmi_tx: hdmi-tx@c883a000 { + compatible = "amlogic,meson-gx-dw-hdmi"; + reg = <0x0 0xc883a000 0x0 0x1c>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index dbfa441f479e..87198eafb04b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -152,6 +152,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &uart_AO { @@ -262,3 +273,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 17ebe46e48d4..3c6c0b7f4187 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -135,6 +135,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -244,3 +255,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index b56732f4defb..4afe1c46ec11 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -620,3 +620,15 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; + +&hdmi_tx { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index cea4a3eded9b..8873c058fad2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -127,6 +127,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &uart_AO { @@ -219,3 +230,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index f24981a90e87..d8e096dff10a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -44,6 +44,7 @@ #include "meson-gx.dtsi" #include #include +#include / { compatible = "amlogic,meson-gxl"; @@ -562,3 +563,15 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; + +&hdmi_tx { + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index a0bc746adb42..11b0bf46a95c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -100,6 +100,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -185,3 +196,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index ddea7305c644..fe451cce93e7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -130,3 +130,6 @@ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; }; +&hdmi_tx { + compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; +}; From 6922bd71adab0a7fe8ffbdc3e72a46431fa29656 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 3 Apr 2017 12:08:09 +0200 Subject: [PATCH 159/180] arm64: dts: r8a7795: salvator-x: Drop _clk suffix from X12 clock node name The current practice is to not add _clk suffixes to clock node names in DT, as these names are used as the actual clock names. Signed-off-by: Geert Uytterhoeven Acked-by: Stephen Boyd Signed-off-by: Simon Horman --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index f25241921067..639aa085d996 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -56,7 +56,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - x12_clk: x12_clk { + x12_clk: x12 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; From 0fbdf9953b41c28845fe8d05007ff09634ee3000 Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Thu, 16 Mar 2017 15:03:24 +0100 Subject: [PATCH 160/180] arm64: dts: hi6220: Reset the mmc hosts The MMC hosts could be left in an unconsistent or uninitialized state from the firmware. Instead of assuming, the firmware did the right things, let's reset the host controllers. This change fixes a bug when the mmc2/sdio is initialized leading to a hung task: [ 242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds. [ 242.711129] Not tainted 4.9.0-rc8-00017-gcf0251f #3 [ 242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 242.724435] kworker/7:1 D 0 675 2 0x00000000 [ 242.729973] Workqueue: events_freezable mmc_rescan [ 242.734796] Call trace: [ 242.737269] [] __switch_to+0xa8/0xb4 [ 242.742437] [] __schedule+0x1c0/0x67c [ 242.747689] [] schedule+0x40/0xa0 [ 242.752594] [] schedule_timeout+0x1c4/0x35c [ 242.758366] [] wait_for_common+0xd0/0x15c [ 242.763964] [] wait_for_completion+0x28/0x34 [ 242.769825] [] mmc_wait_for_req_done+0x40/0x124 [ 242.775949] [] mmc_wait_for_req+0xc0/0xf8 [ 242.781549] [] mmc_wait_for_cmd+0x6c/0x84 [ 242.787149] [] mmc_io_rw_direct_host+0x9c/0x114 [ 242.793270] [] sdio_reset+0x34/0x7c [ 242.798347] [] mmc_rescan+0x2fc/0x360 [ ... ] Cc: stable@vger.kernel.org Signed-off-by: Daniel Lezcano Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 470461ddd427..1e5129b19280 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -774,6 +774,7 @@ clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; clock-names = "ciu", "biu"; resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>; + reset-names = "reset"; bus-width = <0x8>; vmmc-supply = <&ldo19>; pinctrl-names = "default"; @@ -797,6 +798,7 @@ clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; clock-names = "ciu", "biu"; resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>; + reset-names = "reset"; vqmmc-supply = <&ldo7>; vmmc-supply = <&ldo10>; bus-width = <0x4>; @@ -815,6 +817,7 @@ clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; clock-names = "ciu", "biu"; resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>; + reset-names = "reset"; bus-width = <0x4>; broken-cd; pinctrl-names = "default", "idle"; From b96df86307c51a33929da7a2e7f01a75d7798607 Mon Sep 17 00:00:00 2001 From: Jiancheng Xue Date: Wed, 29 Mar 2017 14:30:08 +0800 Subject: [PATCH 161/180] dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board Add bindings for HiSilicon hi3798cv200 SoC and Poplar Board. Signed-off-by: Jiancheng Xue Reviewed-by: Alex Elder Acked-by: Peter Griffin Acked-by: Rob Herring Signed-off-by: Wei Xu --- .../devicetree/bindings/arm/hisilicon/hisilicon.txt | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index f1c1e21a8110..2e732152064b 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -4,6 +4,14 @@ Hi3660 SoC Required root node properties: - compatible = "hisilicon,hi3660"; +Hi3798cv200 SoC +Required root node properties: + - compatible = "hisilicon,hi3798cv200"; + +Hi3798cv200 Poplar Board +Required root node properties: + - compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; + Hi4511 Board Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; From 2f20182ed67092bc038bd88104f780d3b7ebdb85 Mon Sep 17 00:00:00 2001 From: Jiancheng Xue Date: Wed, 29 Mar 2017 14:30:09 +0800 Subject: [PATCH 162/180] arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board Add basic dts files for hi3798cv200-poplar board. Poplar is the first development board compliant with the 96Boards Enterprise Edition TV Platform specification. The board features the Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53 processor and high performance Mali T720 GPU. Signed-off-by: Jiancheng Xue Reviewed-by: Alex Elder Acked-by: Peter Griffin Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/Makefile | 1 + .../boot/dts/hisilicon/hi3798cv200-poplar.dts | 162 +++++++ .../arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 411 ++++++++++++++++++ 3 files changed, 574 insertions(+) create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts create mode 100644 arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index c3a6c1943038..8960ecafd37d 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb +dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts new file mode 100644 index 000000000000..b9142871d6fe --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -0,0 +1,162 @@ +/* + * DTS File for HiSilicon Poplar Development Board + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * Released under the GPLv2 only. + * SPDX-License-Identifier: GPL-2.0 + */ + +/dts-v1/; + +#include +#include "hi3798cv200.dtsi" + +/ { + model = "HiSilicon Poplar Development Board"; + compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200"; + + aliases { + serial0 = &uart0; + serial2 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + + user-led0 { + label = "USER-LED0"; + gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user-led1 { + label = "USER-LED1"; + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + user-led2 { + label = "USER-LED2"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + user-led3 { + label = "USER-LED3"; + gpios = <&gpio10 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + }; +}; + +&gmac1 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + phy-handle = <ð_phy1>; + phy-mode = "rgmii"; + hisilicon,phy-reset-delays-us = <10000 10000 30000>; + + eth_phy1: phy@3 { + reg = <3>; + }; +}; + +&gpio1 { + status = "okay"; + gpio-line-names = "LS-GPIO-E", "", + "", "", + "", "LS-GPIO-F", + "", "LS-GPIO-J"; +}; + +&gpio2 { + status = "okay"; + gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", + "LS-GPIO-L", "LS-GPIO-G", + "LS-GPIO-K", "", + "", ""; +}; + +&gpio3 { + status = "okay"; + gpio-line-names = "", "", + "", "", + "LS-GPIO-C", "", + "", "LS-GPIO-B"; +}; + +&gpio4 { + status = "okay"; + gpio-line-names = "", "", + "", "", + "", "LS-GPIO-D", + "", ""; +}; + +&gpio5 { + status = "okay"; + gpio-line-names = "", "USER-LED-1", + "USER-LED-2", "", + "", "LS-GPIO-A", + "", ""; +}; + +&gpio6 { + status = "okay"; + gpio-line-names = "", "", + "", "USER-LED-0", + "", "", + "", ""; +}; + +&gpio10 { + status = "okay"; + gpio-line-names = "", "", + "", "", + "", "", + "USER-LED-3", ""; +}; + +&i2c0 { + status = "okay"; + label = "LS-I2C0"; +}; + +&i2c2 { + status = "okay"; + label = "LS-I2C1"; +}; + +&ir { + status = "okay"; +}; + +&spi0 { + status = "okay"; + label = "LS-SPI0"; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; + label = "LS-UART0"; +}; +/* No optional LS-UART1 on Low Speed Expansion Connector. */ diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi new file mode 100644 index 000000000000..75865f8a862a --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -0,0 +1,411 @@ +/* + * DTS File for HiSilicon Hi3798cv200 SoC. + * + * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. + * + * Released under the GPLv2 only. + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include + +/ { + compatible = "hisilicon,hi3798cv200"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */ + <0x0 0xf1002000 0x0 0x100>; /* GICC */ + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + soc: soc@f0000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xf0000000 0x10000000>; + + crg: clock-reset-controller@8a22000 { + compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd"; + reg = <0x8a22000 0x1000>; + #clock-cells = <1>; + #reset-cells = <2>; + + gmacphyrst: reset-controller { + compatible = "ti,syscon-reset"; + #reset-cells = <1>; + ti,reset-bits = + <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | + DEASSERT_SET|STATUS_NONE)>, + <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | + DEASSERT_SET|STATUS_NONE)>; + }; + }; + + sysctrl: system-controller@8000000 { + compatible = "hisilicon,hi3798cv200-sysctrl", "syscon"; + reg = <0x8000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <2>; + }; + + uart0: serial@8b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x8b00000 0x1000>; + interrupts = ; + clocks = <&sysctrl HISTB_UART0_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@8b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x8b02000 0x1000>; + interrupts = ; + clocks = <&crg HISTB_UART2_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + i2c0: i2c@8b10000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b10000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C0_CLK>; + status = "disabled"; + }; + + i2c1: i2c@8b11000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b11000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C1_CLK>; + status = "disabled"; + }; + + i2c2: i2c@8b12000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b12000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C2_CLK>; + status = "disabled"; + }; + + i2c3: i2c@8b13000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b13000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C3_CLK>; + status = "disabled"; + }; + + i2c4: i2c@8b14000 { + compatible = "hisilicon,hix5hd2-i2c"; + reg = <0x8b14000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + clocks = <&crg HISTB_I2C4_CLK>; + status = "disabled"; + }; + + spi0: spi@8b1a000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x8b1a000 0x1000>; + interrupts = ; + num-cs = <1>; + cs-gpios = <&gpio7 1 0>; + clocks = <&crg HISTB_SPI0_CLK>; + clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emmc: mmc@9830000 { + compatible = "snps,dw-mshc"; + reg = <0x9830000 0x10000>; + interrupts = ; + clocks = <&crg HISTB_MMC_CIU_CLK>, + <&crg HISTB_MMC_BIU_CLK>; + clock-names = "ciu", "biu"; + }; + + gpio0: gpio@8b20000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b20000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@8b21000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b21000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio2: gpio@8b22000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b22000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio3: gpio@8b23000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b23000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio4: gpio@8b24000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b24000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio5: gpio@8004000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8004000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio6: gpio@8b26000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b26000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio7: gpio@8b27000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b27000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio8: gpio@8b28000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b28000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio9: gpio@8b29000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b29000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio10: gpio@8b2a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b2a000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio11: gpio@8b2b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b2b000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio12: gpio@8b2c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x8b2c000 0x1000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&crg HISTB_APB_CLK>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gmac0: ethernet@9840000 { + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; + reg = <0x9840000 0x1000>, + <0x984300c 0x4>; + interrupts = ; + clocks = <&crg HISTB_ETH0_MAC_CLK>, + <&crg HISTB_ETH0_MACIF_CLK>; + clock-names = "mac_core", "mac_ifc"; + resets = <&crg 0xcc 8>, + <&crg 0xcc 10>, + <&gmacphyrst 0>; + reset-names = "mac_core", "mac_ifc", "phy"; + status = "disabled"; + }; + + gmac1: ethernet@9841000 { + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; + reg = <0x9841000 0x1000>, + <0x9843010 0x4>; + interrupts = ; + clocks = <&crg HISTB_ETH1_MAC_CLK>, + <&crg HISTB_ETH1_MACIF_CLK>; + clock-names = "mac_core", "mac_ifc"; + resets = <&crg 0xcc 9>, + <&crg 0xcc 11>, + <&gmacphyrst 1>; + reset-names = "mac_core", "mac_ifc", "phy"; + status = "disabled"; + }; + + ir: ir@8001000 { + compatible = "hisilicon,hix5hd2-ir"; + reg = <0x8001000 0x1000>; + interrupts = ; + clocks = <&sysctrl HISTB_IR_CLK>; + status = "disabled"; + }; + }; +}; From 2f513bd9eac1a2642b40387d4f89c3987641e59b Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Fri, 7 Apr 2017 16:19:29 +0800 Subject: [PATCH 163/180] arm64: dts: rockchip: fix the memory size of PX5 Evaluation board Commit 122682b2abb6 ("arm64: dts: rockchip: Add PX5 Evaluation board") sets the memory size to 2 GB, but this board only has 1 GB DRAM, so change it to the correct value here. Fixes: 122682b2abb6 ("arm64: dts: rockchip: Add PX5 Evaluation board") Signed-off-by: Andy Yan Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 8cdb3bff9c55..ff48edd8e348 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -53,7 +53,7 @@ }; memory@0 { - reg = <0x0 0x0 0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x40000000>; device_type = "memory"; }; From bbeca45f4184b110d60b545c651b188cd41218fc Mon Sep 17 00:00:00 2001 From: Wei Xu Date: Tue, 28 Mar 2017 23:10:13 +0800 Subject: [PATCH 164/180] arm64: dts: hisi: add mbigen nodes for the hip07 SoC Add mbigen nodes for the hip07 SoC those will be used for the SAS, XGE and PCIe host controllers. Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hip07.dtsi | 61 ++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 5144eb1c179d..6077def65bec 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1014,6 +1014,34 @@ compatible = "hisilicon,mbigen-v2"; reg = <0x0 0xa0080000 0x0 0x10000>; + mbigen_pcie2_a: intc_pcie2_a { + msi-parent = <&p0_its_dsa_a 0x40087>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <10>; + }; + + mbigen_sas1: intc_sas1 { + msi-parent = <&p0_its_dsa_a 0x40000>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <128>; + }; + + mbigen_sas2: intc_sas2 { + msi-parent = <&p0_its_dsa_a 0x40040>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <128>; + }; + + mbigen_smmu_pcie: intc_smmu_pcie { + msi-parent = <&p0_its_dsa_a 0x40b0c>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <3>; + }; + mbigen_usb: intc_usb { msi-parent = <&p0_its_dsa_a 0x40080>; interrupt-controller; @@ -1022,6 +1050,39 @@ }; }; + p0_mbigen_dsa_a: interrupt-controller@c0080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xc0080000 0x0 0x10000>; + + mbigen_dsaf0: intc_dsaf0 { + msi-parent = <&p0_its_dsa_a 0x40800>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <409>; + }; + + mbigen_dsa_roce: intc-roce { + msi-parent = <&p0_its_dsa_a 0x40B1E>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <34>; + }; + + mbigen_sas0: intc-sas0 { + msi-parent = <&p0_its_dsa_a 0x40900>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <128>; + }; + + mbigen_smmu_dsa: intc_smmu_dsa { + msi-parent = <&p0_its_dsa_a 0x40b20>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <3>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; From 38de5b56ef6db87b9ed5a9d7eb798640554af980 Mon Sep 17 00:00:00 2001 From: Wei Xu Date: Tue, 28 Mar 2017 23:21:09 +0800 Subject: [PATCH 165/180] arm64: dts: hisi: add network related nodes for the hip07 SoC Add MDIO, SerDes, Port and realted HNS nodes to support the network on the hip07 SoC. Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hip07.dtsi | 208 +++++++++++++++++++++++ 1 file changed, 208 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 6077def65bec..2feb3625a550 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1116,5 +1116,213 @@ dma-coherent; status = "disabled"; }; + + peri_c_subctrl: sub_ctrl_c@60000000 { + compatible = "hisilicon,peri-subctrl","syscon"; + reg = <0 0x60000000 0x0 0x10000>; + }; + + dsa_subctrl: dsa_subctrl@c0000000 { + compatible = "hisilicon,dsa-subctrl", "syscon"; + reg = <0x0 0xc0000000 0x0 0x10000>; + }; + + serdes_ctrl: sds_ctrl@c2200000 { + compatible = "syscon"; + reg = <0 0xc2200000 0x0 0x80000>; + }; + + mdio@603c0000 { + compatible = "hisilicon,hns-mdio"; + reg = <0x0 0x603c0000 0x0 0x1000>; + subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 + 0x531c 0x5a1c>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + + dsaf0: dsa@c7000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "hisilicon,hns-dsaf-v2"; + mode = "6port-16rss"; + reg = <0x0 0xc5000000 0x0 0x890000 + 0x0 0xc7000000 0x0 0x600000>; + reg-names = "ppe-base", "dsaf-base"; + interrupt-parent = <&mbigen_dsaf0>; + subctrl-syscon = <&dsa_subctrl>; + reset-field-offset = <0>; + interrupts = + <576 1>, <577 1>, <578 1>, <579 1>, <580 1>, + <581 1>, <582 1>, <583 1>, <584 1>, <585 1>, + <586 1>, <587 1>, <588 1>, <589 1>, <590 1>, + <591 1>, <592 1>, <593 1>, <594 1>, <595 1>, + <596 1>, <597 1>, <598 1>, <599 1>, <600 1>, + <960 1>, <961 1>, <962 1>, <963 1>, <964 1>, + <965 1>, <966 1>, <967 1>, <968 1>, <969 1>, + <970 1>, <971 1>, <972 1>, <973 1>, <974 1>, + <975 1>, <976 1>, <977 1>, <978 1>, <979 1>, + <980 1>, <981 1>, <982 1>, <983 1>, <984 1>, + <985 1>, <986 1>, <987 1>, <988 1>, <989 1>, + <990 1>, <991 1>, <992 1>, <993 1>, <994 1>, + <995 1>, <996 1>, <997 1>, <998 1>, <999 1>, + <1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>, + <1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>, + <1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>, + <1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>, + <1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>, + <1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>, + <1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>, + <1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>, + <1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>, + <1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>, + <1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>, + <1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>, + <1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>, + <1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>, + <1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>, + <1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>, + <1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>, + <1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>, + <1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>, + <1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>, + <1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>, + <1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>, + <1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>, + <1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>, + <1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>, + <1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>, + <1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>, + <1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>, + <1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>, + <1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>, + <1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>, + <1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>, + <1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>, + <1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>, + <1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>, + <1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>, + <1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>, + <1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>, + <1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>, + <1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>, + <1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>, + <1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>, + <1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>, + <1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>, + <1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>, + <1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>, + <1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>, + <1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>, + <1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>, + <1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>, + <1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>, + <1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>, + <1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>, + <1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>, + <1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>, + <1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>, + <1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>, + <1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>, + <1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>, + <1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>, + <1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>, + <1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>, + <1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>, + <1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>, + <1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>, + <1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>, + <1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>, + <1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>, + <1340 1>, <1341 1>, <1342 1>, <1343 1>; + + desc-num = <0x400>; + buf-size = <0x1000>; + dma-coherent; + + port@0 { + reg = <0>; + serdes-syscon = <&serdes_ctrl>; + port-rst-offset = <0>; + port-mode-offset = <0>; + mc-mac-mask = [ff f0 00 00 00 00]; + media-type = "fiber"; + }; + + port@1 { + reg = <1>; + serdes-syscon= <&serdes_ctrl>; + port-rst-offset = <1>; + port-mode-offset = <1>; + mc-mac-mask = [ff f0 00 00 00 00]; + media-type = "fiber"; + }; + + port@4 { + reg = <4>; + phy-handle = <&phy0>; + serdes-syscon= <&serdes_ctrl>; + port-rst-offset = <4>; + port-mode-offset = <2>; + mc-mac-mask = [ff f0 00 00 00 00]; + media-type = "copper"; + }; + + port@5 { + reg = <5>; + phy-handle = <&phy1>; + serdes-syscon= <&serdes_ctrl>; + port-rst-offset = <5>; + port-mode-offset = <3>; + mc-mac-mask = [ff f0 00 00 00 00]; + media-type = "copper"; + }; + }; + + eth0: ethernet@4{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <4>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + eth1: ethernet@5{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <5>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + eth2: ethernet@0{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <0>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + eth3: ethernet@1{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <1>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; }; }; From 0f57c6c9cda8e593d6cbdd0fc93ea51084024f2d Mon Sep 17 00:00:00 2001 From: Wei Xu Date: Tue, 28 Mar 2017 23:33:25 +0800 Subject: [PATCH 166/180] arm64: dts: hisi: add RoCE nodes for the hip07 SoC Add the infiniband node to support the RoCE function on the hip07 SoC. Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hip07.dtsi | 81 ++++++++++++++++++++++++ 1 file changed, 81 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 2feb3625a550..bc54b61e52c7 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1324,5 +1324,86 @@ status = "disabled"; dma-coherent; }; + + infiniband@c4000000 { + compatible = "hisilicon,hns-roce-v1"; + reg = <0x0 0xc4000000 0x0 0x100000>; + dma-coherent; + eth-handle = <ð2 ð3 0 0 ð0 ð1>; + dsaf-handle = <&dsaf0>; + node-guid = [00 9A CD 00 00 01 02 03]; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mbigen_dsa_roce>; + interrupts = <722 1>, + <723 1>, + <724 1>, + <725 1>, + <726 1>, + <727 1>, + <728 1>, + <729 1>, + <730 1>, + <731 1>, + <732 1>, + <733 1>, + <734 1>, + <735 1>, + <736 1>, + <737 1>, + <738 1>, + <739 1>, + <740 1>, + <741 1>, + <742 1>, + <743 1>, + <744 1>, + <745 1>, + <746 1>, + <747 1>, + <748 1>, + <749 1>, + <750 1>, + <751 1>, + <752 1>, + <753 1>, + <785 1>, + <754 4>; + + interrupt-names = "hns-roce-comp-0", + "hns-roce-comp-1", + "hns-roce-comp-2", + "hns-roce-comp-3", + "hns-roce-comp-4", + "hns-roce-comp-5", + "hns-roce-comp-6", + "hns-roce-comp-7", + "hns-roce-comp-8", + "hns-roce-comp-9", + "hns-roce-comp-10", + "hns-roce-comp-11", + "hns-roce-comp-12", + "hns-roce-comp-13", + "hns-roce-comp-14", + "hns-roce-comp-15", + "hns-roce-comp-16", + "hns-roce-comp-17", + "hns-roce-comp-18", + "hns-roce-comp-19", + "hns-roce-comp-20", + "hns-roce-comp-21", + "hns-roce-comp-22", + "hns-roce-comp-23", + "hns-roce-comp-24", + "hns-roce-comp-25", + "hns-roce-comp-26", + "hns-roce-comp-27", + "hns-roce-comp-28", + "hns-roce-comp-29", + "hns-roce-comp-30", + "hns-roce-comp-31", + "hns-roce-async", + "hns-roce-common"; + }; }; }; From 86d67897f937000dd13ca9e81e3130adecdf45a0 Mon Sep 17 00:00:00 2001 From: Wei Xu Date: Tue, 28 Mar 2017 23:40:40 +0800 Subject: [PATCH 167/180] arm64: dts: hisi: add SAS nodes for the hip07 SoC Add 3 SAS host controller nodes and the dependent subctrl node to enable the SAS and SATA function for the hip07 SoC. Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hip07.dtsi | 129 +++++++++++++++++++++++ 1 file changed, 129 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index bc54b61e52c7..283d7b532e16 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1127,6 +1127,11 @@ reg = <0x0 0xc0000000 0x0 0x10000>; }; + pcie_subctl: pcie_subctl@a0000000 { + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; + reg = <0x0 0xa0000000 0x0 0x10000>; + }; + serdes_ctrl: sds_ctrl@c2200000 { compatible = "syscon"; reg = <0 0xc2200000 0x0 0x80000>; @@ -1405,5 +1410,129 @@ "hns-roce-async", "hns-roce-common"; }; + + sas0: sas@c3000000 { + compatible = "hisilicon,hip07-sas-v2"; + reg = <0 0xc3000000 0 0x10000>; + sas-addr = [50 01 88 20 16 00 00 00]; + hisilicon,sas-syscon = <&dsa_subctrl>; + ctrl-reset-reg = <0xa60>; + ctrl-reset-sts-reg = <0x5a30>; + ctrl-clock-ena-reg = <0x338>; + queue-count = <16>; + phy-count = <8>; + dma-coherent; + interrupt-parent = <&mbigen_sas0>; + interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>, + <69 4>,<70 4>,<71 4>,<72 4>,<73 4>, + <74 4>,<75 4>,<76 4>,<77 4>,<78 4>, + <79 4>,<80 4>,<81 4>,<82 4>,<83 4>, + <84 4>,<85 4>,<86 4>,<87 4>,<88 4>, + <89 4>,<90 4>,<91 4>,<92 4>,<93 4>, + <94 4>,<95 4>,<96 4>,<97 4>,<98 4>, + <99 4>,<100 4>,<101 4>,<102 4>,<103 4>, + <104 4>,<105 4>,<106 4>,<107 4>,<108 4>, + <109 4>,<110 4>,<111 4>,<112 4>,<113 4>, + <114 4>,<115 4>,<116 4>,<117 4>,<118 4>, + <119 4>,<120 4>,<121 4>,<122 4>,<123 4>, + <124 4>,<125 4>,<126 4>,<127 4>,<128 4>, + <129 4>,<130 4>,<131 4>,<132 4>,<133 4>, + <134 4>,<135 4>,<136 4>,<137 4>,<138 4>, + <139 4>,<140 4>,<141 4>,<142 4>,<143 4>, + <144 4>,<145 4>,<146 4>,<147 4>,<148 4>, + <149 4>,<150 4>,<151 4>,<152 4>,<153 4>, + <154 4>,<155 4>,<156 4>,<157 4>,<158 4>, + <159 4>,<601 1>,<602 1>,<603 1>,<604 1>, + <605 1>,<606 1>,<607 1>,<608 1>,<609 1>, + <610 1>,<611 1>,<612 1>,<613 1>,<614 1>, + <615 1>,<616 1>,<617 1>,<618 1>,<619 1>, + <620 1>,<621 1>,<622 1>,<623 1>,<624 1>, + <625 1>,<626 1>,<627 1>,<628 1>,<629 1>, + <630 1>,<631 1>,<632 1>; + status = "disabled"; + }; + + sas1: sas@a2000000 { + compatible = "hisilicon,hip07-sas-v2"; + reg = <0 0xa2000000 0 0x10000>; + sas-addr = [50 01 88 20 16 00 00 00]; + hisilicon,sas-syscon = <&pcie_subctl>; + hip06-sas-v2-quirk-amt; + ctrl-reset-reg = <0xa18>; + ctrl-reset-sts-reg = <0x5a0c>; + ctrl-clock-ena-reg = <0x318>; + queue-count = <16>; + phy-count = <8>; + dma-coherent; + interrupt-parent = <&mbigen_sas1>; + interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>, + <69 4>,<70 4>,<71 4>,<72 4>,<73 4>, + <74 4>,<75 4>,<76 4>,<77 4>,<78 4>, + <79 4>,<80 4>,<81 4>,<82 4>,<83 4>, + <84 4>,<85 4>,<86 4>,<87 4>,<88 4>, + <89 4>,<90 4>,<91 4>,<92 4>,<93 4>, + <94 4>,<95 4>,<96 4>,<97 4>,<98 4>, + <99 4>,<100 4>,<101 4>,<102 4>,<103 4>, + <104 4>,<105 4>,<106 4>,<107 4>,<108 4>, + <109 4>,<110 4>,<111 4>,<112 4>,<113 4>, + <114 4>,<115 4>,<116 4>,<117 4>,<118 4>, + <119 4>,<120 4>,<121 4>,<122 4>,<123 4>, + <124 4>,<125 4>,<126 4>,<127 4>,<128 4>, + <129 4>,<130 4>,<131 4>,<132 4>,<133 4>, + <134 4>,<135 4>,<136 4>,<137 4>,<138 4>, + <139 4>,<140 4>,<141 4>,<142 4>,<143 4>, + <144 4>,<145 4>,<146 4>,<147 4>,<148 4>, + <149 4>,<150 4>,<151 4>,<152 4>,<153 4>, + <154 4>,<155 4>,<156 4>,<157 4>,<158 4>, + <159 4>,<576 1>,<577 1>,<578 1>,<579 1>, + <580 1>,<581 1>,<582 1>,<583 1>,<584 1>, + <585 1>,<586 1>,<587 1>,<588 1>,<589 1>, + <590 1>,<591 1>,<592 1>,<593 1>,<594 1>, + <595 1>,<596 1>,<597 1>,<598 1>,<599 1>, + <600 1>,<601 1>,<602 1>,<603 1>,<604 1>, + <605 1>,<606 1>,<607 1>; + status = "disabled"; + }; + + sas2: sas@a3000000 { + compatible = "hisilicon,hip07-sas-v2"; + reg = <0 0xa3000000 0 0x10000>; + sas-addr = [50 01 88 20 16 00 00 00]; + hisilicon,sas-syscon = <&pcie_subctl>; + ctrl-reset-reg = <0xae0>; + ctrl-reset-sts-reg = <0x5a70>; + ctrl-clock-ena-reg = <0x3a8>; + queue-count = <16>; + phy-count = <9>; + dma-coherent; + interrupt-parent = <&mbigen_sas2>; + interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>, + <197 4>,<198 4>,<199 4>,<200 4>,<201 4>, + <202 4>,<203 4>,<204 4>,<205 4>,<206 4>, + <207 4>,<208 4>,<209 4>,<210 4>,<211 4>, + <212 4>,<213 4>,<214 4>,<215 4>,<216 4>, + <217 4>,<218 4>,<219 4>,<220 4>,<221 4>, + <222 4>,<223 4>,<224 4>,<225 4>,<226 4>, + <227 4>,<228 4>,<229 4>,<230 4>,<231 4>, + <232 4>,<233 4>,<234 4>,<235 4>,<236 4>, + <237 4>,<238 4>,<239 4>,<240 4>,<241 4>, + <242 4>,<243 4>,<244 4>,<245 4>,<246 4>, + <247 4>,<248 4>,<249 4>,<250 4>,<251 4>, + <252 4>,<253 4>,<254 4>,<255 4>,<256 4>, + <257 4>,<258 4>,<259 4>,<260 4>,<261 4>, + <262 4>,<263 4>,<264 4>,<265 4>,<266 4>, + <267 4>,<268 4>,<269 4>,<270 4>,<271 4>, + <272 4>,<273 4>,<274 4>,<275 4>,<276 4>, + <277 4>,<278 4>,<279 4>,<280 4>,<281 4>, + <282 4>,<283 4>,<284 4>,<285 4>,<286 4>, + <287 4>,<608 1>,<609 1>,<610 1>,<611 1>, + <612 1>,<613 1>,<614 1>,<615 1>,<616 1>, + <617 1>,<618 1>,<619 1>,<620 1>,<621 1>, + <622 1>,<623 1>,<624 1>,<625 1>,<626 1>, + <627 1>,<628 1>,<629 1>,<630 1>,<631 1>, + <632 1>,<633 1>,<634 1>,<635 1>,<636 1>, + <637 1>,<638 1>,<639 1>; + status = "disabled"; + }; }; }; From 519caba7a9575dc2c1555567d033dee9ee570ec7 Mon Sep 17 00:00:00 2001 From: Wei Xu Date: Wed, 29 Mar 2017 00:03:08 +0800 Subject: [PATCH 168/180] arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board Enable the NIC and SAS nodes for the hip07-d05 board to support related functions. Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hip07-d05.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index e05844230583..f5d7f0889b41 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -64,3 +64,23 @@ &usb_ehci { status = "ok"; }; + +ð0 { + status = "ok"; +}; + +ð1 { + status = "ok"; +}; + +ð2 { + status = "ok"; +}; + +ð3 { + status = "ok"; +}; + +&sas1 { + status = "ok"; +}; From 5a7e4774fd91b1c934806ea89b3ec6cc74c54159 Mon Sep 17 00:00:00 2001 From: Wang Xiaoyin Date: Thu, 30 Mar 2017 14:48:02 +0800 Subject: [PATCH 169/180] arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC Extend drive strength levels of the pins for Hi3660 Soc. Signed-off-by: Wang Xiaoyin Signed-off-by: Wei Xu --- include/dt-bindings/pinctrl/hisi.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h index 38f1ea879ea1..0359bfdc9119 100644 --- a/include/dt-bindings/pinctrl/hisi.h +++ b/include/dt-bindings/pinctrl/hisi.h @@ -56,4 +56,19 @@ #define DRIVE4_08MA (4 << 4) #define DRIVE4_10MA (6 << 4) +/* drive strength definition for hi3660 */ +#define DRIVE6_MASK (15 << 4) +#define DRIVE6_04MA (0 << 4) +#define DRIVE6_12MA (4 << 4) +#define DRIVE6_19MA (8 << 4) +#define DRIVE6_27MA (10 << 4) +#define DRIVE6_32MA (15 << 4) +#define DRIVE7_02MA (0 << 4) +#define DRIVE7_04MA (1 << 4) +#define DRIVE7_06MA (2 << 4) +#define DRIVE7_08MA (3 << 4) +#define DRIVE7_10MA (4 << 4) +#define DRIVE7_12MA (5 << 4) +#define DRIVE7_14MA (6 << 4) +#define DRIVE7_16MA (7 << 4) #endif From d4e1eaeee56894f45d0093f9d432be0c868f7c4c Mon Sep 17 00:00:00 2001 From: Wang Xiaoyin Date: Thu, 30 Mar 2017 14:48:03 +0800 Subject: [PATCH 170/180] arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board Add pinctrl dtsi file for HiKey960 development board, enable 5 pinmux devices and 1 pinconf device, also include some nodes of configurations for pins. Signed-off-by: Wang Xiaoyin Signed-off-by: Wei Xu --- .../boot/dts/hisilicon/hi3660-hikey960.dts | 1 + .../boot/dts/hisilicon/hikey960-pinctrl.dtsi | 407 ++++++++++++++++++ 2 files changed, 408 insertions(+) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index ff37f0a0aa93..186251ffc6b2 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "hi3660.dtsi" +#include "hikey960-pinctrl.dtsi" / { model = "HiKey960"; diff --git a/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi new file mode 100644 index 000000000000..719c4bc937a4 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey960-pinctrl.dtsi @@ -0,0 +1,407 @@ +/* + * pinctrl dts fils for Hislicon HiKey960 development board + * + */ + +#include + +/ { + soc { + /* [IOMG_000, IOMG_123] */ + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + pmx0: pinmux@e896c000 { + compatible = "pinctrl-single"; + reg = <0x0 0xe896c000 0x0 0x1f0>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = < + &range 0 7 0 + &range 8 116 0>; + + isp0_pmx_func: isp0_pmx_func { + pinctrl-single,pins = < + 0x058 MUX_M1 /* ISP_CLK0 */ + 0x064 MUX_M1 /* ISP_SCL0 */ + 0x068 MUX_M1 /* ISP_SDA0 */ + >; + }; + + isp1_pmx_func: isp1_pmx_func { + pinctrl-single,pins = < + 0x05c MUX_M1 /* ISP_CLK1 */ + 0x06c MUX_M1 /* ISP_SCL1 */ + 0x070 MUX_M1 /* ISP_SDA1 */ + >; + }; + + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x02c MUX_M1 /* I2C3_SCL */ + 0x030 MUX_M1 /* I2C3_SDA */ + >; + }; + + i2c4_pmx_func: i2c4_pmx_func { + pinctrl-single,pins = < + 0x090 MUX_M1 /* I2C4_SCL */ + 0x094 MUX_M1 /* I2C4_SDA */ + >; + }; + + pcie_perstn_pmx_func: pcie_perstn_pmx_func { + pinctrl-single,pins = < + 0x15c MUX_M1 /* PCIE_PERST_N */ + >; + }; + + usbhub5734_pmx_func: usbhub5734_pmx_func { + pinctrl-single,pins = < + 0x11c MUX_M0 /* GPIO_073 */ + 0x120 MUX_M0 /* GPIO_074 */ + >; + }; + + spi1_pmx_func: spi1_pmx_func { + pinctrl-single,pins = < + 0x034 MUX_M1 /* SPI1_CLK */ + 0x038 MUX_M1 /* SPI1_DI */ + 0x03c MUX_M1 /* SPI1_DO */ + 0x040 MUX_M1 /* SPI1_CS_N */ + >; + }; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x0cc MUX_M2 /* UART0_RXD */ + 0x0d0 MUX_M2 /* UART0_TXD */ + 0x0d4 MUX_M2 /* UART0_RXD_M */ + 0x0d8 MUX_M2 /* UART0_TXD_M */ + >; + }; + + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0x0b0 MUX_M2 /* UART1_CTS_N */ + 0x0b4 MUX_M2 /* UART1_RTS_N */ + 0x0a8 MUX_M2 /* UART1_RXD */ + 0x0ac MUX_M2 /* UART1_TXD */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x0bc MUX_M2 /* UART2_CTS_N */ + 0x0c0 MUX_M2 /* UART2_RTS_N */ + 0x0c8 MUX_M2 /* UART2_RXD */ + 0x0c4 MUX_M2 /* UART2_TXD */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x0dc MUX_M1 /* UART3_CTS_N */ + 0x0e0 MUX_M1 /* UART3_RTS_N */ + 0x0e4 MUX_M1 /* UART3_RXD */ + 0x0e8 MUX_M1 /* UART3_TXD */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x0ec MUX_M1 /* UART4_CTS_N */ + 0x0f0 MUX_M1 /* UART4_RTS_N */ + 0x0f4 MUX_M1 /* UART4_RXD */ + 0x0f8 MUX_M1 /* UART4_TXD */ + >; + }; + + uart5_pmx_func: uart5_pmx_func { + pinctrl-single,pins = < + 0x0c4 MUX_M3 /* UART5_CTS_N */ + 0x0c8 MUX_M3 /* UART5_RTS_N */ + 0x0bc MUX_M3 /* UART5_RXD */ + 0x0c0 MUX_M3 /* UART5_TXD */ + >; + }; + + uart6_pmx_func: uart6_pmx_func { + pinctrl-single,pins = < + 0x0cc MUX_M1 /* UART6_CTS_N */ + 0x0d0 MUX_M1 /* UART6_RTS_N */ + 0x0d4 MUX_M1 /* UART6_RXD */ + 0x0d8 MUX_M1 /* UART6_TXD */ + >; + }; + }; + + /* [IOMG_MMC0_000, IOMG_MMC0_005] */ + pmx1: pinmux@ff37e000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff37e000 0x0 0x18>; + #gpio-range-cells = <0x3>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 6 0>; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SD_CLK */ + 0x004 MUX_M1 /* SD_CMD */ + 0x008 MUX_M1 /* SD_DATA0 */ + 0x00c MUX_M1 /* SD_DATA1 */ + 0x010 MUX_M1 /* SD_DATA2 */ + 0x014 MUX_M1 /* SD_DATA3 */ + >; + }; + }; + + /* [IOMG_FIX_000, IOMG_FIX_011] */ + pmx2: pinmux@ff3b6000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff3b6000 0x0 0x30>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 12 0>; + + spi3_pmx_func: spi3_pmx_func { + pinctrl-single,pins = < + 0x008 MUX_M1 /* SPI3_CLK */ + 0x00c MUX_M1 /* SPI3_DI */ + 0x010 MUX_M1 /* SPI3_DO */ + 0x014 MUX_M1 /* SPI3_CS0_N */ + >; + }; + }; + + /* [IOMG_MMC1_000, IOMG_MMC1_005] */ + pmx3: pinmux@ff3fd000 { + compatible = "pinctrl-single"; + reg = <0x0 0xff3fd000 0x0 0x18>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 6 0>; + + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x000 MUX_M1 /* SDIO_CLK */ + 0x004 MUX_M1 /* SDIO_CMD */ + 0x008 MUX_M1 /* SDIO_DATA0 */ + 0x00c MUX_M1 /* SDIO_DATA1 */ + 0x010 MUX_M1 /* SDIO_DATA2 */ + 0x014 MUX_M1 /* SDIO_DATA3 */ + >; + }; + }; + + /* [IOMG_AO_000, IOMG_AO_041] */ + pmx4: pinmux@fff11000 { + compatible = "pinctrl-single"; + reg = <0x0 0xfff11000 0x0 0xa8>; + #pinctrl-cells = <1>; + #gpio-range-cells = <0x3>; + pinctrl-single,register-width = <0x20>; + pinctrl-single,function-mask = <0x7>; + /* pin base in node, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 42 0>; + + i2s2_pmx_func: i2s2_pmx_func { + pinctrl-single,pins = < + 0x044 MUX_M1 /* I2S2_DI */ + 0x048 MUX_M1 /* I2S2_DO */ + 0x04c MUX_M1 /* I2S2_XCLK */ + 0x050 MUX_M1 /* I2S2_XFS */ + >; + }; + + slimbus_pmx_func: slimbus_pmx_func { + pinctrl-single,pins = < + 0x02c MUX_M1 /* SLIMBUS_CLK */ + 0x030 MUX_M1 /* SLIMBUS_DATA */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x014 MUX_M1 /* I2C0_SCL */ + 0x018 MUX_M1 /* I2C0_SDA */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x01c MUX_M1 /* I2C1_SCL */ + 0x020 MUX_M1 /* I2C1_SDA */ + >; + }; + + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0x024 MUX_M1 /* I2C2_SCL */ + 0x028 MUX_M1 /* I2C2_SDA */ + >; + }; + + i2c7_pmx_func: i2c7_pmx_func { + pinctrl-single,pins = < + 0x024 MUX_M3 /* I2C7_SCL */ + 0x028 MUX_M3 /* I2C7_SDA */ + >; + }; + + spi2_pmx_func: spi2_pmx_func { + pinctrl-single,pins = < + 0x08c MUX_M1 /* SPI2_CLK */ + 0x090 MUX_M1 /* SPI2_DI */ + 0x094 MUX_M1 /* SPI2_DO */ + 0x098 MUX_M1 /* SPI2_CS0_N */ + >; + }; + + spi4_pmx_func: spi4_pmx_func { + pinctrl-single,pins = < + 0x08c MUX_M4 /* SPI4_CLK */ + 0x090 MUX_M4 /* SPI4_DI */ + 0x094 MUX_M4 /* SPI4_DO */ + 0x098 MUX_M4 /* SPI4_CS0_N */ + >; + }; + + i2s0_pmx_func: i2s0_pmx_func { + pinctrl-single,pins = < + 0x034 MUX_M1 /* I2S0_DI */ + 0x038 MUX_M1 /* I2S0_DO */ + 0x03c MUX_M1 /* I2S0_XCLK */ + 0x040 MUX_M1 /* I2S0_XFS */ + >; + }; + }; + + pmx5: pinmux@ff3fd800 { + compatible = "pinconf-single"; + reg = <0x0 0xff3fd800 0x0 0x18>; + #pinctrl-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SDIO_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SDIO_CMD */ + 0x008 0x0 /* SDIO_DATA0 */ + 0x00c 0x0 /* SDIO_DATA1 */ + 0x010 0x0 /* SDIO_DATA2 */ + 0x014 0x0 /* SDIO_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; + }; + + pmx6: pinmux@ff37e800 { + compatible = "pinconf-single"; + reg = <0x0 0xff37e800 0x0 0x18>; + #pinctrl-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0x000 0x0 /* SD_CLK */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_DIS + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_32MA + DRIVE6_MASK + >; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x004 0x0 /* SD_CMD */ + 0x008 0x0 /* SD_DATA0 */ + 0x00c 0x0 /* SD_DATA1 */ + 0x010 0x0 /* SD_DATA2 */ + 0x014 0x0 /* SD_DATA3 */ + >; + pinctrl-single,bias-pulldown = < + PULL_DIS + PULL_DOWN + PULL_DIS + PULL_DOWN + >; + pinctrl-single,bias-pullup = < + PULL_UP + PULL_UP + PULL_DIS + PULL_UP + >; + pinctrl-single,drive-strength = < + DRIVE6_19MA + DRIVE6_MASK + >; + }; + }; + }; +}; From 53e747780a24b271401fe2b1531696a553b00995 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 30 Mar 2017 17:23:03 +0200 Subject: [PATCH 171/180] arm64: dts: marvell: add eMMC support for Armada 37xx Add the eMMC support for Armada 37xx SoC and enable it in the Armada 3720 DB board. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 +++++++++ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +++++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 2a6eef2d4d66..950cbd23a5bd 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -146,6 +146,15 @@ status = "okay"; }; +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + /* CON31 */ &usb3 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 2a4e8dbe33aa..311b97c80c7b 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -218,6 +218,17 @@ }; }; + sdhci0: sdhci@d8000 { + compatible = "marvell,armada-3700-sdhci", + "marvell,sdhci-xenon"; + reg = <0xd8000 0x300 + 0x17808 0x4>; + interrupts = ; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; + status = "disabled"; + }; + sata: sata@e0000 { compatible = "marvell,armada-3700-ahci"; reg = <0xe0000 0x2000>; From 910b4c5cb3807aa5ee051d8b656a5dcb435c4964 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Thu, 30 Mar 2017 17:23:04 +0200 Subject: [PATCH 172/180] arm64: dts: marvell: add sdhci support for Armada 7K/8K Also enable it on the Armada 7040 DB and Armada 8040 DB boards. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 ++++++++++++++ arch/arm64/boot/dts/marvell/armada-8040-db.dts | 12 ++++++++++++ arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 11 +++++++++++ .../boot/dts/marvell/armada-cp110-master.dtsi | 11 +++++++++++ 4 files changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index bb0e1e8e7138..577950492fec 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -147,6 +147,20 @@ status = "okay"; }; +&ap_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; + +&cpm_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; + &cpm_mdio { phy0: ethernet-phy@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 80e685e4235d..81a0b1249c45 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -164,3 +164,15 @@ &cps_usb3_1 { status = "okay"; }; + +&ap_sdhci0 { + status = "okay"; + bus-width = <4>; + non-removable; +}; + +&cpm_sdhci0 { + status = "okay"; + bus-width = <8>; + non-removable; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index a749ba2edec4..9e9a4025e799 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -229,6 +229,17 @@ }; + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = ; + clock-names = "core"; + clocks = <&ap_syscon 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + ap_syscon: system-controller@6f4000 { compatible = "marvell,ap806-system-controller", "syscon"; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index a035f5955282..ad349ad3034c 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -217,6 +217,17 @@ clocks = <&cpm_syscon0 1 25>; status = "okay"; }; + + cpm_sdhci0: sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = ; + clock-names = "core"; + clocks = <&cpm_syscon0 1 4>; + dma-coherent; + status = "disabled"; + }; + }; cpm_pcie0: pcie@f2600000 { From 973020fd9498db8637463c92df4fd6d52caab05c Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 29 Mar 2017 14:44:29 +0200 Subject: [PATCH 173/180] arm64: marvell: dts: add crypto engine description for 7k/8k Add the description of the crypto engine hardware block for the Marvell Armada 7k and Armada 8k processors; for both the CP110 slave and master. Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- .../boot/dts/marvell/armada-cp110-master.dtsi | 15 +++++++++++++++ .../boot/dts/marvell/armada-cp110-slave.dtsi | 16 ++++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index ad349ad3034c..ac8df5201cd6 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -228,6 +228,21 @@ status = "disabled"; }; + cpm_crypto: crypto@800000 { + compatible = "inside-secure,safexcel-eip197"; + reg = <0x800000 0x200000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&cpm_syscon0 1 26>; + status = "disabled"; + }; }; cpm_pcie0: pcie@f2600000 { diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index fb9141ab9b37..7740a75a8230 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -217,6 +217,22 @@ clocks = <&cps_syscon0 1 25>; status = "okay"; }; + + cps_crypto: crypto@800000 { + compatible = "inside-secure,safexcel-eip197"; + reg = <0x800000 0x200000>; + interrupts = , + , + , + , + , + ; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&cps_syscon0 1 26>; + status = "disabled"; + }; }; cps_pcie0: pcie@f4600000 { From 16a51e3485af59073e792c5add3a3f24691f5b80 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 29 Mar 2017 14:44:30 +0200 Subject: [PATCH 174/180] arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB Enable the cryptographic engine available in the CP110 master on the Armada 7040 DB. Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-7040-db.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 577950492fec..12442329b80f 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -185,3 +185,7 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; + +&cpm_crypto { + status = "okay"; +}; From 7ba2ef7c7200e476ee2cede7bcffcf7749e02f5c Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Wed, 29 Mar 2017 14:44:31 +0200 Subject: [PATCH 175/180] arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB Enable the cryptographic engine available in the CP110 master on the Armada 8040 DB. Do not enable the one in the CP110 salve for now, as we do not support multiple cryptographic engines yet. Signed-off-by: Antoine Tenart Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-8040-db.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 81a0b1249c45..dc0d084005b2 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -140,6 +140,10 @@ phy-mode = "rgmii-id"; }; +&cpm_crypto { + status = "okay"; +}; + /* CON5 on CP1 expansion */ &cps_pcie2 { status = "okay"; From 72cc19938f2761529cb9dfb9788bfd9e7cc6bfb2 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 12 Apr 2017 18:26:21 +0100 Subject: [PATCH 176/180] arm64: dts: juno: fix few unit address format warnings This patch fixes the following set of warnings on juno. smb@08000000 unit name should not have leading 0s sysctl@020000 simple-bus unit address format error, expected "20000" apbregs@010000 simple-bus unit address format error, expected "10000" mmci@050000 simple-bus unit address format error, expected "50000" kmi@060000 simple-bus unit address format error, expected "60000" kmi@070000 simple-bus unit address format error, expected "70000" wdt@0f0000 simple-bus unit address format error, expected "f0000" Acked-by: Liviu Dudau Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 +- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8ffaff2043d0..bfe7d683a42e 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -699,7 +699,7 @@ <0x00000008 0x80000000 0x1 0x80000000>; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 098601657f82..2ac43221ddb6 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -137,7 +137,7 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>; @@ -148,7 +148,7 @@ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; - apbregs@010000 { + apbregs@10000 { compatible = "syscon", "simple-mfd"; reg = <0x010000 0x1000>; @@ -216,7 +216,7 @@ }; }; - mmci@050000 { + mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <5>; @@ -228,7 +228,7 @@ clock-names = "mclk", "apb_pclk"; }; - kmi@060000 { + kmi@60000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <8>; @@ -236,7 +236,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - kmi@070000 { + kmi@70000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <8>; @@ -244,7 +244,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - wdt@0f0000 { + wdt@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x10000>; interrupts = <7>; From f9936c4abf63106e0bcc3d82098dd1cfc3dc5290 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 13 Apr 2017 10:05:38 +0100 Subject: [PATCH 177/180] arm64: dts: juno: add information about L1 and L2 caches Commit a8d4636f96ad ("arm64: cacheinfo: Remove CCSIDR-based cache information probing") removed mechanism to extract cache information based on CCSIDR register as the architecture explicitly states no inference about the actual sizes of caches based on CCSIDR registers. Commit 9a802431c527 ("arm64: cacheinfo: add support to override cache levels via device tree") had already provided options to override cache information from the device tree. This patch adds the information about L1 and L2 caches on all variants of Juno platform. Cc: Will Deacon Cc: Liviu Dudau Signed-off-by: Sudeep Holla --- arch/arm64/boot/dts/arm/juno-r1.dts | 42 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno-r2.dts | 42 +++++++++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno.dts | 42 +++++++++++++++++++++++++++++ 3 files changed, 126 insertions(+) diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 0033c59a64b5..0e8943ab94d7 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -89,6 +89,12 @@ reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -100,6 +106,12 @@ reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -111,6 +123,12 @@ reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -122,6 +140,12 @@ reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -133,6 +157,12 @@ reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -144,6 +174,12 @@ reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -152,10 +188,16 @@ A57_L2: l2-cache0 { compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; A53_L2: l2-cache1 { compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 218d0e4736a8..405e2fba025b 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -89,6 +89,12 @@ reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -100,6 +106,12 @@ reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -111,6 +123,12 @@ reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -122,6 +140,12 @@ reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -133,6 +157,12 @@ reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -144,6 +174,12 @@ reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -152,10 +188,16 @@ A72_L2: l2-cache0 { compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; A53_L2: l2-cache1 { compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; }; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index bb2820ef3d5b..0220494c9b80 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -88,6 +88,12 @@ reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -99,6 +105,12 @@ reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -110,6 +122,12 @@ reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -121,6 +139,12 @@ reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -132,6 +156,12 @@ reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -143,6 +173,12 @@ reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; @@ -151,10 +187,16 @@ A57_L2: l2-cache0 { compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; A53_L2: l2-cache1 { compatible = "cache"; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <1024>; }; }; From 019e7db8f346880005850367532490e9848c007b Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Tue, 18 Apr 2017 17:40:36 +0900 Subject: [PATCH 178/180] arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board This patch adds the panel device tree node for s6e3hf2 display controller to TM2e dts. Signed-off-by: Hoegeun Kwon Reviewed-by: Andrzej Hajda Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 694717ade927..b73e1231a86f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -52,6 +52,17 @@ assigned-clock-rates = <278000000>, <400000000>; }; +&dsi { + panel@0 { + compatible = "samsung,s6e3hf2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + }; +}; + &ldo31_reg { regulator-name = "TSP_VDD_1.8V_AP"; regulator-min-microvolt = <1800000>; From 684c581f10f5e21976d9dcd85a190f37ddc843dd Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 20 Apr 2017 16:25:07 +0530 Subject: [PATCH 179/180] arm64: dts: exynos: Use - instead of @ for DT OPP entries Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Reviewed-by: Chanwoo Choi Reviewed-by: Krzysztof Kozlowski Acked-by: Rob Herring [k.kozlowski: Split patch per ARM and ARM64] Signed-off-by: Krzysztof Kozlowski --- .../arm64/boot/dts/exynos/exynos5433-bus.dtsi | 48 +++++++++--------- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 50 +++++++++---------- 2 files changed, 49 insertions(+), 49 deletions(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi index c42dc39c3223..ec11343dc528 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi @@ -94,27 +94,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1075000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-microvolt = <1000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; opp-microvolt = <975000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; opp-microvolt = <962500>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; opp-microvolt = <950000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; opp-microvolt = <937500>; }; @@ -123,19 +123,19 @@ bus_g2d_266_opp_table: opp_table3 { compatible = "operating-points-v2"; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -143,13 +143,13 @@ bus_gscl_opp_table: opp_table4 { compatible = "operating-points-v2"; - opp@333000000 { + opp-333000000 { opp-hz = /bits/ 64 <333000000>; }; - opp@222000000 { + opp-222000000 { opp-hz = /bits/ 64 <222000000>; }; - opp@166500000 { + opp-166500000 { opp-hz = /bits/ 64 <166500000>; }; }; @@ -158,22 +158,22 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@267000000 { + opp-267000000 { opp-hz = /bits/ 64 <267000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@160000000 { + opp-160000000 { opp-hz = /bits/ 64 <160000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; @@ -181,16 +181,16 @@ bus_noc2_opp_table: opp_table6 { compatible = "operating-points-v2"; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp@200000000 { + opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; - opp@134000000 { + opp-134000000 { opp-hz = /bits/ 64 <134000000>; }; - opp@100000000 { + opp-100000000 { opp-hz = /bits/ 64 <100000000>; }; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 16072c1c3ed3..727f36abf3d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -119,43 +119,43 @@ compatible = "operating-points-v2"; opp-shared; - opp@400000000 { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; opp-microvolt = <900000>; }; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <925000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <975000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <1000000>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <1050000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <1075000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1112500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1112500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1150000>; }; @@ -165,63 +165,63 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; opp-microvolt = <900000>; }; - opp@600000000 { + opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <900000>; }; - opp@700000000 { + opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-microvolt = <912500>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <912500>; }; - opp@900000000 { + opp-900000000 { opp-hz = /bits/ 64 <900000000>; opp-microvolt = <937500>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <975000>; }; - opp@1100000000 { + opp-1100000000 { opp-hz = /bits/ 64 <1100000000>; opp-microvolt = <1012500>; }; - opp@1200000000 { + opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <1037500>; }; - opp@1300000000 { + opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1062500>; }; - opp@1400000000 { + opp-1400000000 { opp-hz = /bits/ 64 <1400000000>; opp-microvolt = <1087500>; }; - opp@1500000000 { + opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1125000>; }; - opp@1600000000 { + opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <1137500>; }; - opp@1700000000 { + opp-1700000000 { opp-hz = /bits/ 64 <1700000000>; opp-microvolt = <1175000>; }; - opp@1800000000 { + opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1212500>; }; - opp@1900000000 { + opp-1900000000 { opp-hz = /bits/ 64 <1900000000>; opp-microvolt = <1262500>; }; From 3c0e3abd5ee59acbcbd5d8fc624eaf63f6e7b53c Mon Sep 17 00:00:00 2001 From: Orson Zhai Date: Fri, 21 Apr 2017 11:47:20 +0800 Subject: [PATCH 180/180] arm64: dts: Add basic DT to support Spreadtrum's SP9860G SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum. According to regular hierarchy of sprd dts, whale2.dtsi contains SoC peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff and sp9860g dts is for the board level. Signed-off-by: Orson Zhai Signed-off-by: Chunyan Zhang Reviewed-by: Mathieu Poirier Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/sprd/Makefile | 3 +- arch/arm64/boot/dts/sprd/sc9860.dtsi | 569 ++++++++++++++++++++++ arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 56 +++ arch/arm64/boot/dts/sprd/whale2.dtsi | 71 +++ 4 files changed, 698 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index b658c5e09b15..f0535e6eaaaa 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -1,4 +1,5 @@ -dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ + sp9860g-1h10.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi new file mode 100644 index 000000000000..7b7d8cedacda --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -0,0 +1,569 @@ +/* + * Spreadtrum SC9860 SoC + * + * Copyright (C) 2016, Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include +#include "whale2.dtsi" + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@530000 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530000>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU1: cpu@530001 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530001>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU2: cpu@530002 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530002>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU3: cpu@530003 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530003>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU4: cpu@530100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530100>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU5: cpu@530101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530101>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU6: cpu@530102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530102>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + + CPU7: cpu@530103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x530103>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD &CLUSTER_PD>; + }; + }; + + idle-states{ + entry-method = "arm,psci"; + + CORE_PD: core_pd { + compatible = "arm,idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2500>; + local-timer-stop; + arm,psci-suspend-param = <0x00010002>; + }; + + CLUSTER_PD: cluster_pd { + compatible = "arm,idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + local-timer-stop; + arm,psci-suspend-param = <0x01010003>; + }; + }; + + gic: interrupt-controller@12001000 { + compatible = "arm,gic-400"; + reg = <0 0x12001000 0 0x1000>, + <0 0x12002000 0 0x2000>, + <0 0x12004000 0 0x2000>, + <0 0x12006000 0 0x2000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = , + , + , + , + , + , + , + ; + interrupt-affinity = <&CPU0>, + <&CPU1>, + <&CPU2>, + <&CPU3>, + <&CPU4>, + <&CPU5>, + <&CPU6>, + <&CPU7>; + }; + + soc { + funnel@10001000 { /* SoC Funnel */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x10001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + soc_funnel_out_port: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + + port@1 { + reg = <0>; + soc_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = + <&main_funnel_out_port>; + }; + }; + + port@2 { + reg = <4>; + soc_funnel_in_port1: endpoint { + slave-mode; + remote-endpioint = + <&stm_out_port>; + }; + }; + }; + }; + + etb@10003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x10003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + port { + etb_in: endpoint { + slave-mode; + remote-endpoint = + <&soc_funnel_out_port>; + }; + }; + }; + + stm@10006000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x10006000 0 0x1000>, + <0 0x01000000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + port { + stm_out_port: endpoint { + remote-endpoint = + <&soc_funnel_in_port1>; + }; + }; + }; + + funnel@11001000 { /* Cluster0 Funnel */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_funnel_out_port: endpoint { + remote-endpoint = + <&cluster0_etf_in>; + }; + }; + + port@1 { + reg = <0>; + cluster0_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + + port@2 { + reg = <1>; + cluster0_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + + port@3 { + reg = <2>; + cluster0_funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + + port@4 { + reg = <4>; + cluster0_funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + funnel@11002000 { /* Cluster1 Funnel */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_funnel_out_port: endpoint { + remote-endpoint = + <&cluster1_etf_in>; + }; + }; + + port@1 { + reg = <0>; + cluster1_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm4_out>; + }; + }; + + port@2 { + reg = <1>; + cluster1_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm5_out>; + }; + }; + + port@3 { + reg = <2>; + cluster1_funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&etm6_out>; + }; + }; + + port@4 { + reg = <3>; + cluster1_funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + etf@11003000 { /* ETF on Cluster0 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x11003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_etf_out: endpoint { + remote-endpoint = + <&main_funnel_in_port0>; + }; + }; + + port@1 { + reg = <0>; + cluster0_etf_in: endpoint { + slave-mode; + remote-endpoint = + <&cluster0_funnel_out_port>; + }; + }; + }; + }; + + etf@11004000 { /* ETF on Cluster1 */ + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x11004000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_etf_out: endpoint { + remote-endpoint = + <&main_funnel_in_port1>; + }; + }; + + port@1 { + reg = <0>; + cluster1_etf_in: endpoint { + slave-mode; + remote-endpoint = + <&cluster1_funnel_out_port>; + }; + }; + }; + }; + + funnel@11005000 { /* Main Funnel */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x11005000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + main_funnel_out_port: endpoint { + remote-endpoint = + <&soc_funnel_in_port0>; + }; + }; + + port@1 { + reg = <0>; + main_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = + <&cluster0_etf_out>; + }; + }; + + port@2 { + reg = <1>; + main_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = + <&cluster1_etf_out>; + }; + }; + }; + }; + + etm@11440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11440000 0 0x1000>; + cpu = <&CPU0>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm0_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port0>; + }; + }; + }; + + etm@11540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11540000 0 0x1000>; + cpu = <&CPU1>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm1_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port1>; + }; + }; + }; + + etm@11640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11640000 0 0x1000>; + cpu = <&CPU2>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm2_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port2>; + }; + }; + }; + + etm@11740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11740000 0 0x1000>; + cpu = <&CPU3>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm3_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in_port3>; + }; + }; + }; + + etm@11840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11840000 0 0x1000>; + cpu = <&CPU4>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm4_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port0>; + }; + }; + }; + + etm@11940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11940000 0 0x1000>; + cpu = <&CPU5>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm5_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port1>; + }; + }; + }; + + etm@11a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11a40000 0 0x1000>; + cpu = <&CPU6>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm6_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port2>; + }; + }; + }; + + etm@11b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x11b40000 0 0x1000>; + cpu = <&CPU7>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + port { + etm7_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in_port3>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts new file mode 100644 index 000000000000..ae0b28ce6319 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts @@ -0,0 +1,56 @@ +/* + * Spreadtrum SP9860g board + * + * Copyright (C) 2017, Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "sc9860.dtsi" + +/ { + model = "Spreadtrum SP9860G 3GFHD Board"; + + compatible = "sprd,sp9860g-1h10", "sprd,sc9860"; + + aliases { + serial0 = &uart0; /* for Bluetooth */ + serial1 = &uart1; /* UART console */ + serial2 = &uart2; /* Reserved */ + serial3 = &uart3; /* for GPS */ + }; + + memory{ + device_type = "memory"; + reg = <0x0 0x80000000 0 0x60000000>, + <0x1 0x80000000 0 0x60000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi new file mode 100644 index 000000000000..7c217c547f85 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -0,0 +1,71 @@ +/* + * Spreadtrum Whale2 platform peripherals + * + * Copyright (C) 2016, Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap-apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>; + + uart0: serial@0 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = ; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@100000 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = ; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart2: serial@200000 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x200000 0x100>; + interrupts = ; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart3: serial@300000 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x300000 0x100>; + interrupts = ; + clocks = <&ext_26m>; + status = "disabled"; + }; + }; + + }; + + ext_26m: ext-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext_26m"; + }; +};