OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

[ARM] 3830/1: iop3xx: board support file cleanup 

Revamp the iop3xx board support: move the support code for each iop
board type into its own file, start using platform serial and platform
physmap flash devices, switch to a per-board time tick rate, and get
rid of the ARCH_EP80219 and STEPD config options by doing the relevant
checks at run time.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Lennert Buytenhek 2006-09-18 23:24:52 +01:00 committed by Russell King
parent 7412b10f79
commit c680b77efe
32 changed files with 911 additions and 944 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/configs/ep80219_defconfig
View File

@ -93,7 +93,6 @@ CONFIG_ARCH_IOP32X=y
CONFIG_ARCH_IQ31244=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
CONFIG_ARCH_EP80219=y
#
# IOP3xx Chipset Features
@ -231,9 +230,9 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xf0000000
CONFIG_MTD_PHYSMAP_LEN=0x00800000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set

7
arch/arm/configs/iq31244_defconfig
View File

@ -94,7 +94,6 @@ CONFIG_ARCH_IOP32X=y
CONFIG_ARCH_IQ31244=y
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
#
# IOP3xx Chipset Features
@ -232,9 +231,9 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xf0000000
CONFIG_MTD_PHYSMAP_LEN=0x00800000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set

5
arch/arm/configs/iq80321_defconfig
View File

@ -93,7 +93,6 @@ CONFIG_ARCH_IQ80321=y
# CONFIG_ARCH_IQ31244 is not set
# CONFIG_ARCH_IQ80331 is not set
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
#
# IOP3xx Chipset Features
@ -231,8 +230,8 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xf0000000
CONFIG_MTD_PHYSMAP_LEN=0x00800000
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set

10
arch/arm/configs/iq80331_defconfig
View File

@ -93,12 +93,6 @@ CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_IQ31244 is not set
CONFIG_ARCH_IQ80331=y
# CONFIG_MACH_IQ80332 is not set
# CONFIG_ARCH_EP80219 is not set
#
# IOP3xx Chipset Features
#
CONFIG_IOP331_STEPD=y
#
# Processor Type
@ -236,8 +230,8 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xc0000000
CONFIG_MTD_PHYSMAP_LEN=0x00800000
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set

10
arch/arm/configs/iq80332_defconfig
View File

@ -93,12 +93,6 @@ CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_IQ31244 is not set
# CONFIG_ARCH_IQ80331 is not set
CONFIG_MACH_IQ80332=y
# CONFIG_ARCH_EP80219 is not set
#
# IOP3xx Chipset Features
#
# CONFIG_IOP331_STEPD is not set
#
# Processor Type
@ -236,8 +230,8 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xc0000000
CONFIG_MTD_PHYSMAP_LEN=0x00800000
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_EDB7312 is not set

7
arch/arm/mach-iop32x/Kconfig
View File

@ -16,13 +16,6 @@ config ARCH_IQ31244
Say Y here if you want to run your kernel on the Intel IQ31244
evaluation kit for the IOP321 chipset.
config ARCH_EP80219
bool "Enable support for EP80219"
select ARCH_IQ31244
help
Say Y here if you want to run your kernel on the Intel EP80219
evaluation kit for the Intel 80219 chipset (a IOP321 variant).
endmenu
endif

6
arch/arm/mach-iop32x/Makefile
View File

@ -2,10 +2,10 @@
# Makefile for the linux kernel.
#
obj-y := common.o setup.o irq.o
obj-y := irq.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
obj-$(CONFIG_ARCH_IQ31244) += iq31244.o

67
arch/arm/mach-iop32x/common.c
View File

@ -1,67 +0,0 @@
/*
* arch/arm/mach-iop32x/common.c
*
* Common routines shared across all IOP3xx implementations
*
* Author: Deepak Saxena <dsaxena@mvista.com>
*
* Copyright 2003 (c) MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/delay.h>
#include <asm/hardware.h>
#include <asm/hardware/iop3xx.h>
#ifdef CONFIG_ARCH_EP80219
#include <linux/kernel.h>
/*
* Default power-off for EP80219
*/
static inline void ep80219_send_to_pic(__u8 c) {
}
void ep80219_power_off(void)
{
/*
* This function will send a SHUTDOWN_COMPLETE message to the PIC controller
* over I2C. We are not using the i2c subsystem since we are going to power
* off and it may be removed
*/
/* Send the Address byte w/ the start condition */
*IOP3XX_IDBR1 = 0x60;
*IOP3XX_ICR1 = 0xE9;
mdelay(1);
/* Send the START_MSG byte w/ no start or stop condition */
*IOP3XX_IDBR1 = 0x0F;
*IOP3XX_ICR1 = 0xE8;
mdelay(1);
/* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */
*IOP3XX_IDBR1 = 0x03;
*IOP3XX_ICR1 = 0xE8;
mdelay(1);
/* Send an ignored byte w/ stop condition */
*IOP3XX_IDBR1 = 0x00;
*IOP3XX_ICR1 = 0xEA;
while (1) ;
}
#include <linux/init.h>
#include <linux/pm.h>
static int __init ep80219_init(void)
{
pm_power_off = ep80219_power_off;
return 0;
}
arch_initcall(ep80219_init);
#endif

46
arch/arm/mach-iop32x/iq31244-mm.c
View File

@ -1,46 +0,0 @@
/*
* linux/arch/arm/mach-iop32x/iq31244-mm.c
*
* Low level memory initialization for iq80321 platform
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/hardware/iop3xx.h>
/*
* IQ80321 specific IO mappings
*
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq31244_io_desc[] __initdata = {
{ /* on-board devices */
.virtual = IQ31244_UART,
.pfn = __phys_to_pfn(IQ31244_UART),
.length = 0x00100000,
.type = MT_DEVICE
}
};
void __init iq31244_map_io(void)
{
iop3xx_map_io();
iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
}

90
arch/arm/mach-iop32x/iq31244-pci.c
View File

@ -1,90 +0,0 @@
/*
* arch/arm/mach-iop32x/iq31244-pci.c
*
* PCI support for the Intel IQ31244 reference board
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
/*
* The following macro is used to lookup irqs in a standard table
* format for those systems that do not already have PCI
* interrupts properly routed. We assume 1 <= pin <= 4
*/
#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
({ int _ctl_ = -1; \
unsigned int _idsel = idsel - minid; \
if (_idsel <= maxid) \
_ctl_ = pci_irq_table[_idsel][pin-1]; \
_ctl_; })
#define INTA IRQ_IQ31244_INTA
#define INTB IRQ_IQ31244_INTB
#define INTC IRQ_IQ31244_INTC
#define INTD IRQ_IQ31244_INTD
#define INTE IRQ_IQ31244_I82546
static inline int __init
iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
{
static int pci_irq_table[][4] = {
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
#ifdef CONFIG_ARCH_EP80219
{INTB, INTB, INTB, INTB}, /* CFlash */
{INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */
{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
{INTC, INTC, INTC, INTC}, /* SATA */
#else
{INTB, INTB, INTB, INTB}, /* CFlash */
{INTC, INTC, INTC, INTC}, /* SATA */
{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
{INTE, INTE, INTE, INTE}, /* 82546 GigE */
#endif // CONFIG_ARCH_EP80219
};
BUG_ON(pin < 1 || pin > 4);
return PCI_IRQ_TABLE_LOOKUP(0, 7);
}
static struct hw_pci iq31244_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.scan = iop3xx_pci_scan_bus,
.preinit = iop3xx_pci_preinit,
.map_irq = iq31244_map_irq
};
static int __init iq31244_pci_init(void)
{
if (machine_is_iq31244())
pci_common_init(&iq31244_pci);
return 0;
}
subsys_initcall(iq31244_pci_init);

293
arch/arm/mach-iop32x/iq31244.c Normal file
View File

@ -0,0 +1,293 @@
/*
* arch/arm/mach-iop32x/iq31244.c
*
* Board support code for the Intel EP80219 and IQ31244 platforms.
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
* Copyright 2003 (c) MontaVista, Software, Inc.
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
/*
* The EP80219 and IQ31244 use the same machine ID. To find out
* which of the two we're running on, we look at the processor ID.
*/
static int is_80219(void)
{
extern int processor_id;
return !!((processor_id & 0xffffffe0) == 0x69052e20);
}
/*
* EP80219/IQ31244 timer tick configuration.
*/
static void __init iq31244_timer_init(void)
{
if (is_80219()) {
/* 33.333 MHz crystal. */
iop3xx_init_time(200000000);
} else {
/* 33.000 MHz crystal. */
iop3xx_init_time(198000000);
}
}
static struct sys_timer iq31244_timer = {
.init = iq31244_timer_init,
.offset = iop3xx_gettimeoffset,
};
/*
* IQ31244 I/O.
*/
static struct map_desc iq31244_io_desc[] __initdata = {
{ /* on-board devices */
.virtual = IQ31244_UART,
.pfn = __phys_to_pfn(IQ31244_UART),
.length = 0x00100000,
.type = MT_DEVICE,
},
};
void __init iq31244_map_io(void)
{
iop3xx_map_io();
iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
}
/*
* EP80219/IQ31244 PCI.
*/
static inline int __init
ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if (slot == 0) {
/* CFlash */
irq = IRQ_IOP321_XINT1;
} else if (slot == 1) {
/* 82551 Pro 100 */
irq = IRQ_IOP321_XINT0;
} else if (slot == 2) {
/* PCI-X Slot */
irq = IRQ_IOP321_XINT3;
} else if (slot == 3) {
/* SATA */
irq = IRQ_IOP321_XINT2;
} else {
printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
}
return irq;
}
static struct hw_pci ep80219_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.preinit = iop3xx_pci_preinit,
.scan = iop3xx_pci_scan_bus,
.map_irq = ep80219_pci_map_irq,
};
static inline int __init
iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if (slot == 0) {
/* CFlash */
irq = IRQ_IOP321_XINT1;
} else if (slot == 1) {
/* SATA */
irq = IRQ_IOP321_XINT2;
} else if (slot == 2) {
/* PCI-X Slot */
irq = IRQ_IOP321_XINT3;
} else if (slot == 3) {
/* 82546 GigE */
irq = IRQ_IOP321_XINT0;
} else {
printk(KERN_ERR "iq31244_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
}
return irq;
}
static struct hw_pci iq31244_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.preinit = iop3xx_pci_preinit,
.scan = iop3xx_pci_scan_bus,
.map_irq = iq31244_pci_map_irq,
};
static int __init iq31244_pci_init(void)
{
if (machine_is_iq31244()) {
if (is_80219()) {
pci_common_init(&ep80219_pci);
} else {
pci_common_init(&iq31244_pci);
}
}
return 0;
}
subsys_initcall(iq31244_pci_init);
/*
* IQ31244 machine initialisation.
*/
static struct physmap_flash_data iq31244_flash_data = {
.width = 2,
};
static struct resource iq31244_flash_resource = {
.start = 0xf0000000,
.end = 0xf07fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device iq31244_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &iq31244_flash_data,
},
.num_resources = 1,
.resource = &iq31244_flash_resource,
};
static struct plat_serial8250_port iq31244_serial_port[] = {
{
.mapbase = IQ31244_UART,
.membase = (char *)IQ31244_UART,
.irq = IRQ_IOP321_XINT1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = 1843200,
},
{ },
};
static struct resource iq31244_uart_resource = {
.start = IQ31244_UART,
.end = IQ31244_UART + 7,
.flags = IORESOURCE_MEM,
};
static struct platform_device iq31244_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = iq31244_serial_port,
},
.num_resources = 1,
.resource = &iq31244_uart_resource,
};
/*
* This function will send a SHUTDOWN_COMPLETE message to the PIC
* controller over I2C. We are not using the i2c subsystem since
* we are going to power off and it may be removed
*/
void ep80219_power_off(void)
{
/*
* Send the Address byte w/ the start condition
*/
*IOP3XX_IDBR1 = 0x60;
*IOP3XX_ICR1 = 0xE9;
mdelay(1);
/*
* Send the START_MSG byte w/ no start or stop condition
*/
*IOP3XX_IDBR1 = 0x0F;
*IOP3XX_ICR1 = 0xE8;
mdelay(1);
/*
* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
* stop condition
*/
*IOP3XX_IDBR1 = 0x03;
*IOP3XX_ICR1 = 0xE8;
mdelay(1);
/*
* Send an ignored byte w/ stop condition
*/
*IOP3XX_IDBR1 = 0x00;
*IOP3XX_ICR1 = 0xEA;
while (1)
;
}
static void __init iq31244_init_machine(void)
{
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iq31244_flash_device);
platform_device_register(&iq31244_serial_device);
if (is_80219())
pm_power_off = ep80219_power_off;
}
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
.phys_io = IQ31244_UART,
.io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = iq31244_map_io,
.init_irq = iop321_init_irq,
.timer = &iq31244_timer,
.init_machine = iq31244_init_machine,
MACHINE_END

46
arch/arm/mach-iop32x/iq80321-mm.c
View File

@ -1,46 +0,0 @@
/*
* linux/arch/arm/mach-iop32x/iq80321-mm.c
*
* Low level memory initialization for iq80321 platform
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/hardware/iop3xx.h>
/*
* IQ80321 specific IO mappings
*
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq80321_io_desc[] __initdata = {
{ /* on-board devices */
.virtual = IQ80321_UART,
.pfn = __phys_to_pfn(IQ80321_UART),
.length = 0x00100000,
.type = MT_DEVICE
}
};
void __init iq80321_map_io(void)
{
iop3xx_map_io();
iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
}

84
arch/arm/mach-iop32x/iq80321-pci.c
View File

@ -1,84 +0,0 @@
/*
* arch/arm/mach-iop32x/iq80321-pci.c
*
* PCI support for the Intel IQ80321 reference board
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
/*
* The following macro is used to lookup irqs in a standard table
* format for those systems that do not already have PCI
* interrupts properly routed. We assume 1 <= pin <= 4
*/
#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
({ int _ctl_ = -1; \
unsigned int _idsel = idsel - minid; \
if (_idsel <= maxid) \
_ctl_ = pci_irq_table[_idsel][pin-1]; \
_ctl_; })
#define INTA IRQ_IQ80321_INTA
#define INTB IRQ_IQ80321_INTB
#define INTC IRQ_IQ80321_INTC
#define INTD IRQ_IQ80321_INTD
#define INTE IRQ_IQ80321_I82544
static inline int __init
iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
{
static int pci_irq_table[][4] = {
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{INTE, INTE, INTE, INTE}, /* Gig-E */
{-1, -1, -1, -1}, /* Unused */
{INTC, INTD, INTA, INTB}, /* PCI-X Slot */
{-1, -1, -1, -1},
};
BUG_ON(pin < 1 || pin > 4);
// return PCI_IRQ_TABLE_LOOKUP(4, 7);
return pci_irq_table[idsel%4][pin-1];
}
static struct hw_pci iq80321_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.scan = iop3xx_pci_scan_bus,
.preinit = iop3xx_pci_preinit,
.map_irq = iq80321_map_irq
};
static int __init iq80321_pci_init(void)
{
if (machine_is_iq80321())
pci_common_init(&iq80321_pci);
return 0;
}
subsys_initcall(iq80321_pci_init);

193
arch/arm/mach-iop32x/iq80321.c Normal file
View File

@ -0,0 +1,193 @@
/*
* arch/arm/mach-iop32x/iq80321.c
*
* Board support code for the Intel IQ80321 platform.
*
* Author: Rory Bolt <rorybolt@pacbell.net>
* Copyright (C) 2002 Rory Bolt
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
/*
* IQ80321 timer tick configuration.
*/
static void __init iq80321_timer_init(void)
{
/* 33.333 MHz crystal. */
iop3xx_init_time(200000000);
}
static struct sys_timer iq80321_timer = {
.init = iq80321_timer_init,
.offset = iop3xx_gettimeoffset,
};
/*
* IQ80321 I/O.
*/
static struct map_desc iq80321_io_desc[] __initdata = {
{ /* on-board devices */
.virtual = IQ80321_UART,
.pfn = __phys_to_pfn(IQ80321_UART),
.length = 0x00100000,
.type = MT_DEVICE,
},
};
void __init iq80321_map_io(void)
{
iop3xx_map_io();
iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
}
/*
* IQ80321 PCI.
*/
static inline int __init
iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if ((slot == 2 || slot == 6) && pin == 1) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT2;
} else if ((slot == 2 || slot == 6) && pin == 2) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT3;
} else if ((slot == 2 || slot == 6) && pin == 3) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT0;
} else if ((slot == 2 || slot == 6) && pin == 4) {
/* PCI-X Slot INTA */
irq = IRQ_IOP321_XINT1;
} else if (slot == 4 || slot == 8) {
/* Gig-E */
irq = IRQ_IOP321_XINT0;
} else {
printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
}
return irq;
}
static struct hw_pci iq80321_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.preinit = iop3xx_pci_preinit,
.scan = iop3xx_pci_scan_bus,
.map_irq = iq80321_pci_map_irq,
};
static int __init iq80321_pci_init(void)
{
if (machine_is_iq80321())
pci_common_init(&iq80321_pci);
return 0;
}
subsys_initcall(iq80321_pci_init);
/*
* IQ80321 machine initialisation.
*/
static struct physmap_flash_data iq80321_flash_data = {
.width = 1,
};
static struct resource iq80321_flash_resource = {
.start = 0xf0000000,
.end = 0xf07fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device iq80321_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &iq80321_flash_data,
},
.num_resources = 1,
.resource = &iq80321_flash_resource,
};
static struct plat_serial8250_port iq80321_serial_port[] = {
{
.mapbase = IQ80321_UART,
.membase = (char *)IQ80321_UART,
.irq = IRQ_IOP321_XINT1,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = 1843200,
},
{ },
};
static struct resource iq80321_uart_resource = {
.start = IQ80321_UART,
.end = IQ80321_UART + 7,
.flags = IORESOURCE_MEM,
};
static struct platform_device iq80321_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = iq80321_serial_port,
},
.num_resources = 1,
.resource = &iq80321_uart_resource,
};
static void __init iq80321_init_machine(void)
{
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iq80321_flash_device);
platform_device_register(&iq80321_serial_device);
}
MACHINE_START(IQ80321, "Intel IQ80321")
/* Maintainer: Intel Corp. */
.phys_io = IQ80321_UART,
.io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = iq80321_map_io,
.init_irq = iop321_init_irq,
.timer = &iq80321_timer,
.init_machine = iq80321_init_machine,
MACHINE_END

111
arch/arm/mach-iop32x/setup.c
View File

@ -1,111 +0,0 @@
/*
* linux/arch/arm/mach-iop32x/setup.c
*
* Author: Nicolas Pitre <nico@cam.org>
* Copyright (C) 2001 MontaVista Software, Inc.
* Copyright (C) 2004 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/iop3xx.h>
#define IOP321_UART_XTAL 1843200
#ifdef CONFIG_ARCH_IQ80321
#define UARTBASE IQ80321_UART
#define IRQ_UART IRQ_IQ80321_UART
#endif
#ifdef CONFIG_ARCH_IQ31244
#define UARTBASE IQ31244_UART
#define IRQ_UART IRQ_IQ31244_UART
#endif
static struct uart_port iop321_serial_ports[] = {
{
.membase = (char*)(UARTBASE),
.mapbase = (UARTBASE),
.irq = IRQ_UART,
.flags = UPF_SKIP_TEST,
.iotype = UPIO_MEM,
.regshift = 0,
.uartclk = IOP321_UART_XTAL,
.line = 0,
.type = PORT_16550A,
.fifosize = 16
}
};
void __init iop32x_init(void)
{
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
early_serial_setup(&iop321_serial_ports[0]);
}
#ifdef CONFIG_ARCH_IQ80321
extern void iq80321_map_io(void);
#endif
#ifdef CONFIG_ARCH_IQ31244
extern void iq31244_map_io(void);
#endif
static void __init iop3xx_timer_init(void)
{
iop3xx_init_time(IOP321_TICK_RATE);
}
struct sys_timer iop321_timer = {
.init = iop3xx_timer_init,
.offset = iop3xx_gettimeoffset,
};
#if defined(CONFIG_ARCH_IQ80321)
MACHINE_START(IQ80321, "Intel IQ80321")
/* Maintainer: Intel Corporation */
.phys_io = IQ80321_UART,
.io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc,
.map_io = iq80321_map_io,
.init_irq = iop321_init_irq,
.timer = &iop321_timer,
.boot_params = 0xa0000100,
.init_machine = iop32x_init,
MACHINE_END
#elif defined(CONFIG_ARCH_IQ31244)
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
.phys_io = IQ31244_UART,
.io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc,
.map_io = iq31244_map_io,
.init_irq = iop321_init_irq,
.timer = &iop321_timer,
.boot_params = 0xa0000100,
.init_machine = iop32x_init,
MACHINE_END
#else
#error No machine descriptor defined for this IOP3XX implementation
#endif

6
arch/arm/mach-iop33x/Kconfig
View File

@ -16,12 +16,6 @@ config MACH_IQ80332
Say Y here if you want to run your kernel on the Intel IQ80332
evaluation kit for the IOP332 chipset.
config IOP331_STEPD
bool "Chip stepping D of the IOP80331 processor or IOP80333"
help
Say Y here if you have StepD of the IOP80331 or IOP8033
based platforms.
endmenu
endif

6
arch/arm/mach-iop33x/Makefile
View File

@ -2,10 +2,10 @@
# Makefile for the linux kernel.
#
obj-y := setup.o irq.o
obj-y := irq.o uart.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_IQ80331) += iq80331-pci.o
obj-$(CONFIG_MACH_IQ80332) += iq80332-pci.o
obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
obj-$(CONFIG_MACH_IQ80332) += iq80332.o

80
arch/arm/mach-iop33x/iq80331-pci.c
View File

@ -1,80 +0,0 @@
/*
* arch/arm/mach-iop33x/iq80331-pci.c
*
* PCI support for the Intel IQ80331 reference board
*
* Author: Dave Jiang <dave.jiang@intel.com>
* Copyright (C) 2003, 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
/*
* The following macro is used to lookup irqs in a standard table
* format for those systems that do not already have PCI
* interrupts properly routed. We assume 1 <= pin <= 4
*/
#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
({ int _ctl_ = -1; \
unsigned int _idsel = idsel - minid; \
if (_idsel <= maxid) \
_ctl_ = pci_irq_table[_idsel][pin-1]; \
_ctl_; })
#define INTA IRQ_IQ80331_INTA
#define INTB IRQ_IQ80331_INTB
#define INTC IRQ_IQ80331_INTC
#define INTD IRQ_IQ80331_INTD
//#define INTE IRQ_IQ80331_I82544
static inline int __init
iq80331_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
{
static int pci_irq_table[][4] = {
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{INTB, INTC, INTD, INTA}, /* PCI-X Slot */
{INTC, INTC, INTC, INTC}, /* GigE */
};
BUG_ON(pin < 1 || pin > 4);
return PCI_IRQ_TABLE_LOOKUP(1, 7);
}
static struct hw_pci iq80331_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.scan = iop3xx_pci_scan_bus,
.preinit = iop3xx_pci_preinit,
.map_irq = iq80331_map_irq
};
static int __init iq80331_pci_init(void)
{
if (machine_is_iq80331())
pci_common_init(&iq80331_pci);
return 0;
}
subsys_initcall(iq80331_pci_init);

148
arch/arm/mach-iop33x/iq80331.c Normal file
View File

@ -0,0 +1,148 @@
/*
* arch/arm/mach-iop33x/iq80331.c
*
* Board support code for the Intel IQ80331 platform.
*
* Author: Dave Jiang <dave.jiang@intel.com>
* Copyright (C) 2003 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
/*
* IQ80331 timer tick configuration.
*/
static void __init iq80331_timer_init(void)
{
/* D-Step parts run at a higher internal bus frequency */
if (*IOP3XX_ATURID >= 0xa)
iop3xx_init_time(333000000);
else
iop3xx_init_time(266000000);
}
static struct sys_timer iq80331_timer = {
.init = iq80331_timer_init,
.offset = iop3xx_gettimeoffset,
};
/*
* IQ80331 PCI.
*/
static inline int __init
iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if (slot == 1 && pin == 1) {
/* PCI-X Slot INTA */
irq = IRQ_IOP331_XINT1;
} else if (slot == 1 && pin == 2) {
/* PCI-X Slot INTB */
irq = IRQ_IOP331_XINT2;
} else if (slot == 1 && pin == 3) {
/* PCI-X Slot INTC */
irq = IRQ_IOP331_XINT3;
} else if (slot == 1 && pin == 4) {
/* PCI-X Slot INTD */
irq = IRQ_IOP331_XINT0;
} else if (slot == 2) {
/* GigE */
irq = IRQ_IOP331_XINT2;
} else {
printk(KERN_ERR "iq80331_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
}
return irq;
}
static struct hw_pci iq80331_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.preinit = iop3xx_pci_preinit,
.scan = iop3xx_pci_scan_bus,
.map_irq = iq80331_pci_map_irq,
};
static int __init iq80331_pci_init(void)
{
if (machine_is_iq80331())
pci_common_init(&iq80331_pci);
return 0;
}
subsys_initcall(iq80331_pci_init);
/*
* IQ80331 machine initialisation.
*/
static struct physmap_flash_data iq80331_flash_data = {
.width = 1,
};
static struct resource iq80331_flash_resource = {
.start = 0xc0000000,
.end = 0xc07fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device iq80331_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &iq80331_flash_data,
},
.num_resources = 1,
.resource = &iq80331_flash_resource,
};
static void __init iq80331_init_machine(void)
{
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iop33x_uart0_device);
platform_device_register(&iop33x_uart1_device);
platform_device_register(&iq80331_flash_device);
}
MACHINE_START(IQ80331, "Intel IQ80331")
/* Maintainer: Intel Corp. */
.phys_io = 0xfefff000,
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = iop3xx_map_io,
.init_irq = iop331_init_irq,
.timer = &iq80331_timer,
.init_machine = iq80331_init_machine,
MACHINE_END

86
arch/arm/mach-iop33x/iq80332-pci.c
View File

@ -1,86 +0,0 @@
/*
* arch/arm/mach-iop33x/iq80332-pci.c
*
* PCI support for the Intel IQ80332 reference board
*
* Author: Dave Jiang <dave.jiang@intel.com>
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
/*
* The following macro is used to lookup irqs in a standard table
* format for those systems that do not already have PCI
* interrupts properly routed. We assume 1 <= pin <= 4
*/
#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
({ int _ctl_ = -1; \
unsigned int _idsel = idsel - minid; \
if (_idsel <= maxid) \
_ctl_ = pci_irq_table[_idsel][pin-1]; \
_ctl_; })
#define INTA IRQ_IQ80332_INTA
#define INTB IRQ_IQ80332_INTB
#define INTC IRQ_IQ80332_INTC
#define INTD IRQ_IQ80332_INTD
//#define INTE IRQ_IQ80332_I82544
static inline int __init
iq80332_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
{
static int pci_irq_table[][8] = {
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{-1, -1, -1, -1},
{-1, -1, -1, -1},
{-1, -1, -1, -1},
{INTA, INTB, INTC, INTD}, /* PCI-X Slot */
{-1, -1, -1, -1},
{INTC, INTC, INTC, INTC}, /* GigE */
{-1, -1, -1, -1},
{-1, -1, -1, -1},
};
BUG_ON(pin < 1 || pin > 4);
return PCI_IRQ_TABLE_LOOKUP(1, 7);
}
static struct hw_pci iq80332_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.scan = iop3xx_pci_scan_bus,
.preinit = iop3xx_pci_preinit,
.map_irq = iq80332_map_irq
};
static int __init iq80332_pci_init(void)
{
if (machine_is_iq80332())
pci_common_init(&iq80332_pci);
return 0;
}
subsys_initcall(iq80332_pci_init);

148
arch/arm/mach-iop33x/iq80332.c Normal file
View File

@ -0,0 +1,148 @@
/*
* arch/arm/mach-iop33x/iq80332.c
*
* Board support code for the Intel IQ80332 platform.
*
* Author: Dave Jiang <dave.jiang@intel.com>
* Copyright (C) 2004 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/pci.h>
#include <asm/mach/time.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/pgtable.h>
/*
* IQ80332 timer tick configuration.
*/
static void __init iq80332_timer_init(void)
{
/* D-Step parts and the iop333 run at a higher internal bus frequency */
if (*IOP3XX_ATURID >= 0xa || *IOP3XX_ATUDID == 0x374)
iop3xx_init_time(333000000);
else
iop3xx_init_time(266000000);
}
static struct sys_timer iq80332_timer = {
.init = iq80332_timer_init,
.offset = iop3xx_gettimeoffset,
};
/*
* IQ80332 PCI.
*/
static inline int __init
iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if (slot == 4 && pin == 1) {
/* PCI-X Slot INTA */
irq = IRQ_IOP331_XINT0;
} else if (slot == 4 && pin == 2) {
/* PCI-X Slot INTB */
irq = IRQ_IOP331_XINT1;
} else if (slot == 4 && pin == 3) {
/* PCI-X Slot INTC */
irq = IRQ_IOP331_XINT2;
} else if (slot == 4 && pin == 4) {
/* PCI-X Slot INTD */
irq = IRQ_IOP331_XINT3;
} else if (slot == 6) {
/* GigE */
irq = IRQ_IOP331_XINT2;
} else {
printk(KERN_ERR "iq80332_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
}
return irq;
}
static struct hw_pci iq80332_pci __initdata = {
.swizzle = pci_std_swizzle,
.nr_controllers = 1,
.setup = iop3xx_pci_setup,
.preinit = iop3xx_pci_preinit,
.scan = iop3xx_pci_scan_bus,
.map_irq = iq80332_pci_map_irq,
};
static int __init iq80332_pci_init(void)
{
if (machine_is_iq80332())
pci_common_init(&iq80332_pci);
return 0;
}
subsys_initcall(iq80332_pci_init);
/*
* IQ80332 machine initialisation.
*/
static struct physmap_flash_data iq80332_flash_data = {
.width = 1,
};
static struct resource iq80332_flash_resource = {
.start = 0xc0000000,
.end = 0xc07fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device iq80332_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &iq80332_flash_data,
},
.num_resources = 1,
.resource = &iq80332_flash_resource,
};
static void __init iq80332_init_machine(void)
{
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
platform_device_register(&iop33x_uart0_device);
platform_device_register(&iop33x_uart1_device);
platform_device_register(&iq80332_flash_device);
}
MACHINE_START(IQ80332, "Intel IQ80332")
/* Maintainer: Intel Corp. */
.phys_io = 0xfefff000,
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = iop3xx_map_io,
.init_irq = iop331_init_irq,
.timer = &iq80332_timer,
.init_machine = iq80332_init_machine,
MACHINE_END

162
arch/arm/mach-iop33x/setup.c
View File

@ -1,162 +0,0 @@
/*
* linux/arch/arm/mach-iop33x/setup.c
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2004 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/hardware/iop3xx.h>
#define IOP331_UART_XTAL 33334000
static struct resource iop33x_uart0_resources[] = {
[0] = {
.start = IOP331_UART0_PHYS,
.end = IOP331_UART0_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART0,
.end = IRQ_IOP331_UART0,
.flags = IORESOURCE_IRQ
}
};
static struct resource iop33x_uart1_resources[] = {
[0] = {
.start = IOP331_UART1_PHYS,
.end = IOP331_UART1_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART1,
.end = IRQ_IOP331_UART1,
.flags = IORESOURCE_IRQ
}
};
static struct plat_serial8250_port iop33x_uart0_data[] = {
{
.membase = (char*)(IOP331_UART0_VIRT),
.mapbase = (IOP331_UART0_PHYS),
.irq = IRQ_IOP331_UART0,
.uartclk = IOP331_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
},
{ },
};
static struct plat_serial8250_port iop33x_uart1_data[] = {
{
.membase = (char*)(IOP331_UART1_VIRT),
.mapbase = (IOP331_UART1_PHYS),
.irq = IRQ_IOP331_UART1,
.uartclk = IOP331_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
},
{ },
};
static struct platform_device iop33x_uart0 = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev.platform_data = iop33x_uart0_data,
.num_resources = 2,
.resource = iop33x_uart0_resources,
};
static struct platform_device iop33x_uart1 = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev.platform_data = iop33x_uart1_data,
.num_resources = 2,
.resource = iop33x_uart1_resources,
};
static struct platform_device *iop33x_devices[] __initdata = {
&iop33x_uart0,
&iop33x_uart1,
};
void __init iop33x_init(void)
{
if(iop_is_331())
{
platform_add_devices(iop33x_devices,
ARRAY_SIZE(iop33x_devices));
}
platform_device_register(&iop3xx_i2c0_device);
platform_device_register(&iop3xx_i2c1_device);
}
#ifdef CONFIG_ARCH_IOP33X
extern void iop331_init_irq(void);
#endif
static void __init iop3xx_timer_init(void)
{
iop3xx_init_time(IOP331_TICK_RATE);
}
struct sys_timer iop331_timer = {
.init = iop3xx_timer_init,
.offset = iop3xx_gettimeoffset,
};
#if defined(CONFIG_ARCH_IQ80331)
MACHINE_START(IQ80331, "Intel IQ80331")
/* Maintainer: Intel Corp. */
.phys_io = 0xfefff000,
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
.map_io = iop3xx_map_io,
.init_irq = iop331_init_irq,
.timer = &iop331_timer,
.boot_params = 0x0100,
.init_machine = iop33x_init,
MACHINE_END
#elif defined(CONFIG_MACH_IQ80332)
MACHINE_START(IQ80332, "Intel IQ80332")
/* Maintainer: Intel Corp. */
.phys_io = 0xfefff000,
.io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical
.map_io = iop3xx_map_io,
.init_irq = iop331_init_irq,
.timer = &iop331_timer,
.boot_params = 0x0100,
.init_machine = iop33x_init,
MACHINE_END
#else
#error No machine descriptor defined for this IOP3XX implementation
#endif

106
arch/arm/mach-iop33x/uart.c Normal file
View File

@ -0,0 +1,106 @@
/*
* linux/arch/arm/mach-iop33x/uart.c
*
* Author: Dave Jiang (dave.jiang@intel.com)
* Copyright (C) 2004 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/memory.h>
#include <asm/hardware.h>
#include <asm/hardware/iop3xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#define IOP331_UART_XTAL 33334000
static struct plat_serial8250_port iop33x_uart0_data[] = {
{
.membase = (char *)IOP331_UART0_VIRT,
.mapbase = IOP331_UART0_PHYS,
.irq = IRQ_IOP331_UART0,
.uartclk = IOP331_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
},
{ },
};
static struct resource iop33x_uart0_resources[] = {
[0] = {
.start = IOP331_UART0_PHYS,
.end = IOP331_UART0_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART0,
.end = IRQ_IOP331_UART0,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device iop33x_uart0_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = iop33x_uart0_data,
},
.num_resources = 2,
.resource = iop33x_uart0_resources,
};
static struct resource iop33x_uart1_resources[] = {
[0] = {
.start = IOP331_UART1_PHYS,
.end = IOP331_UART1_PHYS + 0x3f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_IOP331_UART1,
.end = IRQ_IOP331_UART1,
.flags = IORESOURCE_IRQ,
},
};
static struct plat_serial8250_port iop33x_uart1_data[] = {
{
.membase = (char *)IOP331_UART1_VIRT,
.mapbase = IOP331_UART1_PHYS,
.irq = IRQ_IOP331_UART1,
.uartclk = IOP331_UART_XTAL,
.regshift = 2,
.iotype = UPIO_MEM,
.flags = UPF_SKIP_TEST,
},
{ },
};
struct platform_device iop33x_uart1_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = iop33x_uart1_data,
},
.num_resources = 2,
.resource = iop33x_uart1_resources,
};

12
include/asm-arm/arch-iop32x/iop321.h
View File

@ -150,18 +150,6 @@
#define IOP321_IINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007D8)
#define IOP321_FINTSRC (volatile u32 *)IOP321_REG_ADDR(0x000007DC)
/* Timers */
#ifdef CONFIG_ARCH_IQ80321
#define IOP321_TICK_RATE 200000000 /* 200 MHz clock */
#elif defined(CONFIG_ARCH_IQ31244)
#define IOP321_TICK_RATE 198000000 /* 33.000 MHz crystal */
#endif
#ifdef CONFIG_ARCH_EP80219
#undef IOP321_TICK_RATE
#define IOP321_TICK_RATE 200000000 /* 33.333333 Mhz crystal */
#endif
/* Application accelerator unit 0x00000800 - 0x000008FF */
#define IOP321_AAU_ACR (volatile u32 *)IOP321_REG_ADDR(0x00000800)
#define IOP321_AAU_ASR (volatile u32 *)IOP321_REG_ADDR(0x00000804)

7
include/asm-arm/arch-iop32x/iq31244.h
View File

@ -7,18 +7,11 @@
#ifndef _IQ31244_H_
#define _IQ31244_H_
#define IQ31244_FLASHBASE 0xf0000000 /* Flash */
#define IQ31244_FLASHSIZE 0x00800000
#define IQ31244_FLASHWIDTH 2
#define IQ31244_UART 0xfe800000 /* UART #1 */
#define IQ31244_7SEG_1 0xfe840000 /* 7-Segment MSB */
#define IQ31244_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
#define IQ31244_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
#define IQ31244_BATT_STAT 0xfe8f0000 /* Battery Status */
#ifndef __ASSEMBLY__
extern void iq31244_map_io(void);
#endif
#endif // _IQ31244_H_

7
include/asm-arm/arch-iop32x/iq80321.h
View File

@ -7,18 +7,11 @@
#ifndef _IQ80321_H_
#define _IQ80321_H_
#define IQ80321_FLASHBASE 0xf0000000 /* Flash */
#define IQ80321_FLASHSIZE 0x00800000
#define IQ80321_FLASHWIDTH 1
#define IQ80321_UART 0xfe800000 /* UART #1 */
#define IQ80321_7SEG_1 0xfe840000 /* 7-Segment MSB */
#define IQ80321_7SEG_0 0xfe850000 /* 7-Segment LSB (WO) */
#define IQ80321_ROTARY_SW 0xfe8d0000 /* Rotary Switch */
#define IQ80321_BATT_STAT 0xfe8f0000 /* Battery Status */
#ifndef __ASSEMBLY__
extern void iq80321_map_io(void);
#endif
#endif // _IQ80321_H_

38
include/asm-arm/arch-iop32x/irqs.h
View File

@ -47,42 +47,4 @@
#define NR_IRQS 32
/*
* Interrupts available on the IQ80321 board
*/
/*
* On board devices
*/
#define IRQ_IQ80321_I82544 IRQ_IOP321_XINT0
#define IRQ_IQ80321_UART IRQ_IOP321_XINT1
/*
* PCI interrupts
*/
#define IRQ_IQ80321_INTA IRQ_IOP321_XINT0
#define IRQ_IQ80321_INTB IRQ_IOP321_XINT1
#define IRQ_IQ80321_INTC IRQ_IOP321_XINT2
#define IRQ_IQ80321_INTD IRQ_IOP321_XINT3
/*
* Interrupts on the IQ31244 board
*/
/*
* On board devices
*/
#define IRQ_IQ31244_UART IRQ_IOP321_XINT1
#define IRQ_IQ31244_I82546 IRQ_IOP321_XINT0
#define IRQ_IQ31244_SATA IRQ_IOP321_XINT2
#define IRQ_IQ31244_PCIX_SLOT IRQ_IOP321_XINT3
/*
* PCI interrupts
*/
#define IRQ_IQ31244_INTA IRQ_IOP321_XINT0
#define IRQ_IQ31244_INTB IRQ_IOP321_XINT1
#define IRQ_IQ31244_INTC IRQ_IOP321_XINT2
#define IRQ_IQ31244_INTD IRQ_IOP321_XINT3
#endif // _IRQ_H_

5
include/asm-arm/arch-iop33x/hardware.h
View File

@ -22,6 +22,11 @@
#define PCIBIOS_MIN_IO 0x00000000
#define PCIBIOS_MIN_MEM 0x00000000
#ifndef __ASSEMBLY__
extern struct platform_device iop33x_uart0_device;
extern struct platform_device iop33x_uart1_device;
#endif
/*
* Generic chipset bits

10
include/asm-arm/arch-iop33x/iop331.h
View File

@ -136,16 +136,6 @@
#define IOP331_FINTVEC (volatile u32 *)IOP331_REG_ADDR(0x000007CC)
/* Timers */
#if defined(CONFIG_ARCH_IOP33X)
#define IOP331_TICK_RATE 266000000 /* 266 MHz IB clock */
#endif
#if defined(CONFIG_IOP331_STEPD) || defined(CONFIG_ARCH_IQ80333)
#undef IOP331_TICK_RATE
#define IOP331_TICK_RATE 333000000 /* 333 Mhz IB clock */
#endif
/* Application accelerator unit 0x00000800 - 0x000008FF */
#define IOP331_AAU_ACR (volatile u32 *)IOP331_REG_ADDR(0x00000800)
#define IOP331_AAU_ASR (volatile u32 *)IOP331_REG_ADDR(0x00000804)

7
include/asm-arm/arch-iop33x/iq80331.h
View File

@ -7,17 +7,10 @@
#ifndef _IQ80331_H_
#define _IQ80331_H_
#define IQ80331_FLASHBASE 0xc0000000 /* Flash */
#define IQ80331_FLASHSIZE 0x00800000
#define IQ80331_FLASHWIDTH 1
#define IQ80331_7SEG_1 0xce840000 /* 7-Segment MSB */
#define IQ80331_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
#define IQ80331_ROTARY_SW 0xce8d0000 /* Rotary Switch */
#define IQ80331_BATT_STAT 0xce8f0000 /* Battery Status */
#ifndef __ASSEMBLY__
extern void iq80331_map_io(void);
#endif
#endif // _IQ80331_H_

7
include/asm-arm/arch-iop33x/iq80332.h
View File

@ -7,17 +7,10 @@
#ifndef _IQ80332_H_
#define _IQ80332_H_
#define IQ80332_FLASHBASE 0xc0000000 /* Flash */
#define IQ80332_FLASHSIZE 0x00800000
#define IQ80332_FLASHWIDTH 1
#define IQ80332_7SEG_1 0xce840000 /* 7-Segment MSB */
#define IQ80332_7SEG_0 0xce850000 /* 7-Segment LSB (WO) */
#define IQ80332_ROTARY_SW 0xce8d0000 /* Rotary Switch */
#define IQ80332_BATT_STAT 0xce8f0000 /* Battery Status */
#ifndef __ASSEMBLY__
extern void iq80332_map_io(void);
#endif
#endif // _IQ80332_H_

38
include/asm-arm/arch-iop33x/irqs.h
View File

@ -57,42 +57,4 @@
#define NR_IRQS 64
/*
* Interrupts available on the IQ80331 board
*/
/*
* On board devices
*/
#define IRQ_IQ80331_I82544 IRQ_IOP331_XINT0
#define IRQ_IQ80331_UART0 IRQ_IOP331_UART0
#define IRQ_IQ80331_UART1 IRQ_IOP331_UART1
/*
* PCI interrupts
*/
#define IRQ_IQ80331_INTA IRQ_IOP331_XINT0
#define IRQ_IQ80331_INTB IRQ_IOP331_XINT1
#define IRQ_IQ80331_INTC IRQ_IOP331_XINT2
#define IRQ_IQ80331_INTD IRQ_IOP331_XINT3
/*
* Interrupts available on the IQ80332 board
*/
/*
* On board devices
*/
#define IRQ_IQ80332_I82544 IRQ_IOP331_XINT0
#define IRQ_IQ80332_UART0 IRQ_IOP331_UART0
#define IRQ_IQ80332_UART1 IRQ_IOP331_UART1
/*
* PCI interrupts
*/
#define IRQ_IQ80332_INTA IRQ_IOP331_XINT0
#define IRQ_IQ80332_INTB IRQ_IOP331_XINT1
#define IRQ_IQ80332_INTC IRQ_IOP331_XINT2
#define IRQ_IQ80332_INTD IRQ_IOP331_XINT3
#endif // _IRQ_H_