powerpc: Introduce VSX thread_struct and CONFIG_VSX

The layout of the new VSR registers and how they overlap on top of the
legacy FPR and VR registers is:

                   VSR doubleword 0               VSR doubleword 1
          ----------------------------------------------------------------
  VSR[0]  |             FPR[0]            |                              |
          ----------------------------------------------------------------
  VSR[1]  |             FPR[1]            |                              |
          ----------------------------------------------------------------
          |              ...              |                              |
          |              ...              |                              |
          ----------------------------------------------------------------
  VSR[30] |             FPR[30]           |                              |
          ----------------------------------------------------------------
  VSR[31] |             FPR[31]           |                              |
          ----------------------------------------------------------------
  VSR[32] |                             VR[0]                            |
          ----------------------------------------------------------------
  VSR[33] |                             VR[1]                            |
          ----------------------------------------------------------------
          |                              ...                             |
          |                              ...                             |
          ----------------------------------------------------------------
  VSR[62] |                             VR[30]                           |
          ----------------------------------------------------------------
  VSR[63] |                             VR[31]                           |
          ----------------------------------------------------------------

VSX has 64 128bit registers.  The first 32 regs overlap with the FP
registers and hence extend them with and additional 64 bits.  The
second 32 regs overlap with the VMX registers.

This commit introduces the thread_struct changes required to reflect
this register layout.  Ptrace and signals code is updated so that the
floating point registers are correctly accessed from the thread_struct
when CONFIG_VSX is enabled.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This commit is contained in:
Michael Neuling 2008-06-25 14:07:18 +10:00 committed by Paul Mackerras
parent 6f3d8e6947
commit c6e6771b87
5 changed files with 121 additions and 21 deletions

View File

@ -78,6 +78,10 @@ int main(void)
DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr));
DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
#endif /* CONFIG_VSX */
#ifdef CONFIG_PPC64
DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
#else /* CONFIG_PPC64 */

View File

@ -215,29 +215,56 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
#ifdef CONFIG_VSX
double buf[33];
int i;
#endif
flush_fp_to_thread(target);
#ifdef CONFIG_VSX
/* copy to local buffer then write that out */
for (i = 0; i < 32 ; i++)
buf[i] = target->thread.TS_FPR(i);
memcpy(&buf[32], &target->thread.fpscr, sizeof(double));
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
#else
BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
offsetof(struct thread_struct, TS_FPR(32)));
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fpr, 0, -1);
#endif
}
static int fpr_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
#ifdef CONFIG_VSX
double buf[33];
int i;
#endif
flush_fp_to_thread(target);
#ifdef CONFIG_VSX
/* copy to local buffer then write that out */
i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
if (i)
return i;
for (i = 0; i < 32 ; i++)
target->thread.TS_FPR(i) = buf[i];
memcpy(&target->thread.fpscr, &buf[32], sizeof(double));
return 0;
#else
BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
offsetof(struct thread_struct, TS_FPR(32)));
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fpr, 0, -1);
#endif
}
#ifdef CONFIG_ALTIVEC
/*
* Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.

View File

@ -337,14 +337,16 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
int sigret)
{
unsigned long msr = regs->msr;
#ifdef CONFIG_VSX
double buf[32];
int i;
#endif
/* Make sure floating point registers are stored in regs */
flush_fp_to_thread(current);
/* save general and floating-point registers */
if (save_general_regs(regs, frame) ||
__copy_to_user(&frame->mc_fregs, current->thread.fpr,
ELF_NFPREG * sizeof(double)))
/* save general registers */
if (save_general_regs(regs, frame))
return 1;
#ifdef CONFIG_ALTIVEC
@ -368,7 +370,20 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
return 1;
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
/* save FPR copy to local buffer then write to the thread_struct */
flush_fp_to_thread(current);
for (i = 0; i < 32 ; i++)
buf[i] = current->thread.TS_FPR(i);
memcpy(&buf[i], &current->thread.fpscr, sizeof(double));
if (__copy_to_user(&frame->mc_fregs, buf, ELF_NFPREG * sizeof(double)))
return 1;
#else
/* save floating-point registers */
if (__copy_to_user(&frame->mc_fregs, current->thread.fpr,
ELF_NFPREG * sizeof(double)))
return 1;
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* save spe registers */
if (current->thread.used_spe) {
@ -411,6 +426,10 @@ static long restore_user_regs(struct pt_regs *regs,
long err;
unsigned int save_r2 = 0;
unsigned long msr;
#ifdef CONFIG_VSX
double buf[32];
int i;
#endif
/*
* restore general registers but not including MSR or SOFTE. Also
@ -438,16 +457,11 @@ static long restore_user_regs(struct pt_regs *regs,
*/
discard_lazy_cpu_state();
/* force the process to reload the FP registers from
current->thread when it next does FP instructions */
regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
sizeof(sr->mc_fregs)))
return 1;
#ifdef CONFIG_ALTIVEC
/* force the process to reload the altivec registers from
current->thread when it next does altivec instructions */
/*
* Force the process to reload the altivec registers from
* current->thread when it next does altivec instructions
*/
regs->msr &= ~MSR_VEC;
if (msr & MSR_VEC) {
/* restore altivec registers from the stack */
@ -462,6 +476,23 @@ static long restore_user_regs(struct pt_regs *regs,
return 1;
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
if (__copy_from_user(buf, &sr->mc_fregs,sizeof(sr->mc_fregs)))
return 1;
for (i = 0; i < 32 ; i++)
current->thread.TS_FPR(i) = buf[i];
memcpy(&current->thread.fpscr, &buf[i], sizeof(double));
#else
if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
sizeof(sr->mc_fregs)))
return 1;
#endif /* CONFIG_VSX */
/*
* force the process to reload the FP registers from
* current->thread when it next does FP instructions
*/
regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
#ifdef CONFIG_SPE
/* force the process to reload the spe registers from
current->thread when it next does spe instructions */

View File

@ -89,6 +89,10 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
#endif
unsigned long msr = regs->msr;
long err = 0;
#ifdef CONFIG_VSX
double buf[FP_REGS_SIZE];
int i;
#endif
flush_fp_to_thread(current);
@ -112,11 +116,21 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
#else /* CONFIG_ALTIVEC */
err |= __put_user(0, &sc->v_regs);
#endif /* CONFIG_ALTIVEC */
flush_fp_to_thread(current);
#ifdef CONFIG_VSX
/* Copy FP to local buffer then write that out */
for (i = 0; i < 32 ; i++)
buf[i] = current->thread.TS_FPR(i);
memcpy(&buf[i], &current->thread.fpscr, sizeof(double));
err |= __copy_to_user(&sc->fp_regs, buf, FP_REGS_SIZE);
#else /* CONFIG_VSX */
/* copy fpr regs and fpscr */
err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
#endif /* CONFIG_VSX */
err |= __put_user(&sc->gp_regs, &sc->regs);
WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
err |= __put_user(handler, &sc->handler);
if (set != NULL)
@ -134,6 +148,9 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
{
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs;
#endif
#ifdef CONFIG_VSX
double buf[FP_REGS_SIZE];
#endif
unsigned long err = 0;
unsigned long save_r13 = 0;
@ -182,8 +199,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
*/
regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC);
err |= __copy_from_user(&current->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
#ifdef CONFIG_ALTIVEC
err |= __get_user(v_regs, &sc->v_regs);
if (err)
@ -202,7 +217,18 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
else
current->thread.vrsave = 0;
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
/* restore floating point */
err |= __copy_from_user(buf, &sc->fp_regs, FP_REGS_SIZE);
if (err)
return err;
for (i = 0; i < 32 ; i++)
current->thread.TS_FPR(i) = buf[i];
memcpy(&current->thread.fpscr, &buf[i], sizeof(double));
#else
err |= __copy_from_user(&current->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
#endif
return err;
}

View File

@ -12,7 +12,11 @@
#include <asm/reg.h>
#ifdef CONFIG_VSX
#define TS_FPRWIDTH 2
#else
#define TS_FPRWIDTH 1
#endif
#ifndef __ASSEMBLY__
#include <linux/compiler.h>
@ -80,6 +84,7 @@ extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
/* Lazy FPU handling on uni-processor */
extern struct task_struct *last_task_used_math;
extern struct task_struct *last_task_used_altivec;
extern struct task_struct *last_task_used_vsx;
extern struct task_struct *last_task_used_spe;
#ifdef CONFIG_PPC32
@ -142,7 +147,9 @@ typedef struct {
unsigned long seg;
} mm_segment_t;
#define TS_FPR(i) fpr[i]
#define TS_FPROFFSET 0
#define TS_VSRLOWOFFSET 1
#define TS_FPR(i) fpr[i][TS_FPROFFSET]
struct thread_struct {
unsigned long ksp; /* Kernel stack pointer */
@ -160,8 +167,9 @@ struct thread_struct {
unsigned long dbcr0; /* debug control register values */
unsigned long dbcr1;
#endif
double fpr[32]; /* Complete floating point set */
struct { /* fpr ... fpscr must be contiguous */
/* FP and VSX 0-31 register set */
double fpr[32][TS_FPRWIDTH];
struct {
unsigned int pad;
unsigned int val; /* Floating point status */
@ -181,6 +189,10 @@ struct thread_struct {
unsigned long vrsave;
int used_vr; /* set if process has used altivec */
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_VSX
/* VSR status */
int used_vsr; /* set if process has used altivec */
#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
unsigned long evr[32]; /* upper 32-bits of SPE regs */
u64 acc; /* Accumulator */