USB host: Adding USB ehci & ohci support for spear platform

This patch adds support for ehci and ohci controller in the SPEAr platform.

Changes since V2:
added clear_tt_buffer_complete in ehci_spear_hc_driver

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Deepak Sikri 2010-11-10 14:33:18 +05:30 committed by Greg Kroah-Hartman
parent ad78acafee
commit c8c38de9d8
5 changed files with 464 additions and 0 deletions

View File

@ -41,6 +41,7 @@ config USB_ARCH_HAS_OHCI
default y if MFD_TC6393XB
default y if ARCH_W90X900
default y if ARCH_DAVINCI_DA8XX
default y if PLAT_SPEAR
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
@ -67,6 +68,7 @@ config USB_ARCH_HAS_EHCI
default y if ARCH_MXC
default y if ARCH_OMAP3
default y if ARCH_VT8500
default y if PLAT_SPEAR
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.

View File

@ -1221,6 +1221,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER vt8500_ehci_driver
#endif
#ifdef CONFIG_PLAT_SPEAR
#include "ehci-spear.c"
#define PLATFORM_DRIVER spear_ehci_hcd_driver
#endif
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)

View File

@ -0,0 +1,212 @@
/*
* Driver for EHCI HCD on SPEAR SOC
*
* Copyright (C) 2010 ST Micro Electronics,
* Deepak Sikri <deepak.sikri@st.com>
*
* Based on various ehci-*.c drivers
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/platform_device.h>
#include <linux/clk.h>
struct spear_ehci {
struct ehci_hcd ehci;
struct clk *clk;
};
#define to_spear_ehci(hcd) (struct spear_ehci *)hcd_to_ehci(hcd)
static void spear_start_ehci(struct spear_ehci *ehci)
{
clk_enable(ehci->clk);
}
static void spear_stop_ehci(struct spear_ehci *ehci)
{
clk_disable(ehci->clk);
}
static int ehci_spear_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval = 0;
/* registers start at offset 0x0 */
ehci->caps = hcd->regs;
ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
&ehci->caps->hc_capbase));
/* cache this readonly data; minimize chip reads */
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
retval = ehci_halt(ehci);
if (retval)
return retval;
retval = ehci_init(hcd);
if (retval)
return retval;
ehci_reset(ehci);
ehci_port_power(ehci, 0);
return retval;
}
static const struct hc_driver ehci_spear_hc_driver = {
.description = hcd_name,
.product_desc = "SPEAr EHCI",
.hcd_priv_size = sizeof(struct spear_ehci),
/* generic hardware linkage */
.irq = ehci_irq,
.flags = HCD_MEMORY | HCD_USB2,
/* basic lifecycle operations */
.reset = ehci_spear_setup,
.start = ehci_run,
.stop = ehci_stop,
.shutdown = ehci_shutdown,
/* managing i/o requests and associated device resources */
.urb_enqueue = ehci_urb_enqueue,
.urb_dequeue = ehci_urb_dequeue,
.endpoint_disable = ehci_endpoint_disable,
.endpoint_reset = ehci_endpoint_reset,
/* scheduling support */
.get_frame_number = ehci_get_frame,
/* root hub support */
.hub_status_data = ehci_hub_status_data,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd ;
struct spear_ehci *ehci;
struct resource *res;
struct clk *usbh_clk;
const struct hc_driver *driver = &ehci_spear_hc_driver;
int *pdata = pdev->dev.platform_data;
int irq, retval;
char clk_name[20] = "usbh_clk";
if (pdata == NULL)
return -EFAULT;
if (usb_disabled())
return -ENODEV;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
retval = irq;
goto fail_irq_get;
}
if (*pdata >= 0)
sprintf(clk_name, "usbh.%01d_clk", *pdata);
usbh_clk = clk_get(NULL, clk_name);
if (IS_ERR(usbh_clk)) {
dev_err(&pdev->dev, "Error getting interface clock\n");
retval = PTR_ERR(usbh_clk);
goto fail_get_usbh_clk;
}
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
goto fail_create_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
retval = -ENODEV;
goto fail_request_resource;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
retval = -EBUSY;
goto fail_request_resource;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
dev_dbg(&pdev->dev, "error mapping memory\n");
retval = -ENOMEM;
goto fail_ioremap;
}
ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
ehci->clk = usbh_clk;
spear_start_ehci(ehci);
retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
if (retval)
goto fail_add_hcd;
return retval;
fail_add_hcd:
spear_stop_ehci(ehci);
iounmap(hcd->regs);
fail_ioremap:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
fail_request_resource:
usb_put_hcd(hcd);
fail_create_hcd:
clk_put(usbh_clk);
fail_get_usbh_clk:
fail_irq_get:
dev_err(&pdev->dev, "init fail, %d\n", retval);
return retval ;
}
static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct spear_ehci *ehci_p = to_spear_ehci(hcd);
if (!hcd)
return 0;
if (in_interrupt())
BUG();
usb_remove_hcd(hcd);
if (ehci_p->clk)
spear_stop_ehci(ehci_p);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
if (ehci_p->clk)
clk_put(ehci_p->clk);
return 0;
}
static struct platform_driver spear_ehci_hcd_driver = {
.probe = spear_ehci_hcd_drv_probe,
.remove = spear_ehci_hcd_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "spear-ehci",
.bus = &platform_bus_type
}
};
MODULE_ALIAS("platform:spear-ehci");

View File

@ -1081,6 +1081,11 @@ MODULE_LICENSE ("GPL");
#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
#endif
#ifdef CONFIG_PLAT_SPEAR
#include "ohci-spear.c"
#define PLATFORM_DRIVER spear_ohci_hcd_driver
#endif
#ifdef CONFIG_PPC_PS3
#include "ohci-ps3.c"
#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver

View File

@ -0,0 +1,240 @@
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* Copyright (C) 2010 ST Microelectronics.
* Deepak Sikri<deepak.sikri@st.com>
*
* Based on various ohci-*.c drivers
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/signal.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
struct spear_ohci {
struct ohci_hcd ohci;
struct clk *clk;
};
#define to_spear_ohci(hcd) (struct spear_ohci *)hcd_to_ohci(hcd)
static void spear_start_ohci(struct spear_ohci *ohci)
{
clk_enable(ohci->clk);
}
static void spear_stop_ohci(struct spear_ohci *ohci)
{
clk_disable(ohci->clk);
}
static int __devinit ohci_spear_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
ret = ohci_init(ohci);
if (ret < 0)
return ret;
ohci->regs = hcd->regs;
ret = ohci_run(ohci);
if (ret < 0) {
dev_err(hcd->self.controller, "can't start\n");
ohci_stop(hcd);
return ret;
}
create_debug_files(ohci);
#ifdef DEBUG
ohci_dump(ohci, 1);
#endif
return 0;
}
static const struct hc_driver ohci_spear_hc_driver = {
.description = hcd_name,
.product_desc = "SPEAr OHCI",
.hcd_priv_size = sizeof(struct spear_ohci),
/* generic hardware linkage */
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
/* basic lifecycle operations */
.start = ohci_spear_start,
.stop = ohci_stop,
.shutdown = ohci_shutdown,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
/* managing i/o requests and associated device resources */
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/* scheduling support */
.get_frame_number = ohci_get_frame,
/* root hub support */
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
.start_port_reset = ohci_start_port_reset,
};
static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
{
const struct hc_driver *driver = &ohci_spear_hc_driver;
struct usb_hcd *hcd = NULL;
struct clk *usbh_clk;
struct spear_ohci *ohci_p;
struct resource *res;
int retval, irq;
int *pdata = pdev->dev.platform_data;
char clk_name[20] = "usbh_clk";
if (pdata == NULL)
return -EFAULT;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
retval = irq;
goto fail_irq_get;
}
if (*pdata >= 0)
sprintf(clk_name, "usbh.%01d_clk", *pdata);
usbh_clk = clk_get(NULL, clk_name);
if (IS_ERR(usbh_clk)) {
dev_err(&pdev->dev, "Error getting interface clock\n");
retval = PTR_ERR(usbh_clk);
goto fail_get_usbh_clk;
}
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
retval = -ENOMEM;
goto fail_create_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
retval = -ENODEV;
goto fail_request_resource;
}
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_dbg(&pdev->dev, "request_mem_region failed\n");
retval = -EBUSY;
goto fail_request_resource;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "ioremap failed\n");
retval = -ENOMEM;
goto fail_ioremap;
}
ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
ohci_p->clk = usbh_clk;
spear_start_ohci(ohci_p);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED);
if (retval == 0)
return retval;
spear_stop_ohci(ohci_p);
iounmap(hcd->regs);
fail_ioremap:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
fail_request_resource:
usb_put_hcd(hcd);
fail_create_hcd:
clk_put(usbh_clk);
fail_get_usbh_clk:
fail_irq_get:
dev_err(&pdev->dev, "init fail, %d\n", retval);
return retval;
}
static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct spear_ohci *ohci_p = to_spear_ohci(hcd);
usb_remove_hcd(hcd);
if (ohci_p->clk)
spear_stop_ohci(ohci_p);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
if (ohci_p->clk)
clk_put(ohci_p->clk);
platform_set_drvdata(pdev, NULL);
return 0;
}
#if defined(CONFIG_PM)
static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
pm_message_t message)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct spear_ohci *ohci_p = to_spear_ohci(hcd);
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
spear_stop_ohci(ohci_p);
ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
return 0;
}
static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct spear_ohci *ohci_p = to_spear_ohci(hcd);
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
spear_start_ohci(ohci_p);
ohci_finish_controller_resume(hcd);
return 0;
}
#endif
/* Driver definition to register with the platform bus */
static struct platform_driver spear_ohci_hcd_driver = {
.probe = spear_ohci_hcd_drv_probe,
.remove = spear_ohci_hcd_drv_remove,
#ifdef CONFIG_PM
.suspend = spear_ohci_hcd_drv_suspend,
.resume = spear_ohci_hcd_drv_resume,
#endif
.driver = {
.owner = THIS_MODULE,
.name = "spear-ohci",
},
};
MODULE_ALIAS("platform:spear-ohci");