[ARM] 3405/1: lpd7a40x: CPLD ssp driver

Patch from Marc Singer

Driver for operating SSP devices through LPD7A40X CPLD chip.  This
driver is used by the audio codecs.

Signed-off-by: Marc Singer <elf@buici.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Marc Singer 2006-05-16 11:41:32 +01:00 committed by Russell King
parent 903e2bbda9
commit c97898614b
2 changed files with 348 additions and 0 deletions

View File

@ -14,6 +14,7 @@ config MACH_LPD7A400
bool "LPD7A400 Card Engine" bool "LPD7A400 Card Engine"
select ARCH_LH7A400 select ARCH_LH7A400
# select IDE_POLL # select IDE_POLL
select HAS_TOUCHSCREEN_ADS7843_LH7
help help
Say Y here if you are using Logic Product Development's Say Y here if you are using Logic Product Development's
LPD7A400 CardEngine. For the time being, the LPD7A400 and LPD7A400 CardEngine. For the time being, the LPD7A400 and
@ -23,6 +24,7 @@ config MACH_LPD7A404
bool "LPD7A404 Card Engine" bool "LPD7A404 Card Engine"
select ARCH_LH7A404 select ARCH_LH7A404
# select IDE_POLL # select IDE_POLL
select HAS_TOUCHSCREEN_ADC_LH7
help help
Say Y here if you are using Logic Product Development's Say Y here if you are using Logic Product Development's
LPD7A404 CardEngine. For the time being, the LPD7A400 and LPD7A404 CardEngine. For the time being, the LPD7A400 and
@ -34,6 +36,9 @@ config ARCH_LH7A400
config ARCH_LH7A404 config ARCH_LH7A404
bool bool
config LPD7A40X_CPLD_SSP
bool
config LH7A40X_CONTIGMEM config LH7A40X_CONTIGMEM
bool "Disable NUMA Support" bool "Disable NUMA Support"
depends on ARCH_LH7A40X depends on ARCH_LH7A40X

View File

@ -0,0 +1,343 @@
/* arch/arm/mach-lh7a40x/ssp-cpld.c
*
* Copyright (C) 2004,2005 Marc Singer
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* SSP/SPI driver for the CardEngine CPLD.
*
*/
/* NOTES
-----
o *** This driver is cribbed from the 7952x implementation.
Some comments may not apply.
o This driver contains sufficient logic to control either the
serial EEPROMs or the audio codec. It is included in the kernel
to support the codec. The EEPROMs are really the responsibility
of the boot loader and should probably be left alone.
o The code must be augmented to cope with multiple, simultaneous
clients.
o The audio codec writes to the codec chip whenever playback
starts.
o The touchscreen driver writes to the ads chip every time it
samples.
o The audio codec must write 16 bits, but the touch chip writes
are 8 bits long.
o We need to be able to keep these configurations separate while
simultaneously active.
*/
#include <linux/module.h>
#include <linux/kernel.h>
//#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
//#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/arch/ssp.h>
//#define TALK
#if defined (TALK)
#define PRINTK(f...) printk (f)
#else
#define PRINTK(f...) do {} while (0)
#endif
#if defined (CONFIG_ARCH_LH7A400)
# define CPLD_SPID __REGP16(CPLD06_VIRT) /* SPI data */
# define CPLD_SPIC __REGP16(CPLD08_VIRT) /* SPI control */
# define CPLD_SPIC_CS_CODEC (1<<0)
# define CPLD_SPIC_CS_TOUCH (1<<1)
# define CPLD_SPIC_WRITE (0<<2)
# define CPLD_SPIC_READ (1<<2)
# define CPLD_SPIC_DONE (1<<3) /* r/o */
# define CPLD_SPIC_LOAD (1<<4)
# define CPLD_SPIC_START (1<<4)
# define CPLD_SPIC_LOADED (1<<5) /* r/o */
#endif
#define CPLD_SPI __REGP16(CPLD0A_VIRT) /* SPI operation */
#define CPLD_SPI_CS_EEPROM (1<<3)
#define CPLD_SPI_SCLK (1<<2)
#define CPLD_SPI_TX_SHIFT (1)
#define CPLD_SPI_TX (1<<CPLD_SPI_TX_SHIFT)
#define CPLD_SPI_RX_SHIFT (0)
#define CPLD_SPI_RX (1<<CPLD_SPI_RX_SHIFT)
/* *** FIXME: these timing values are substantially larger than the
*** chip requires. We may implement an nsleep () function. */
#define T_SKH 1 /* Clock time high (us) */
#define T_SKL 1 /* Clock time low (us) */
#define T_CS 1 /* Minimum chip select low time (us) */
#define T_CSS 1 /* Minimum chip select setup time (us) */
#define T_DIS 1 /* Data setup time (us) */
/* EEPROM SPI bits */
#define P_START (1<<9)
#define P_WRITE (1<<7)
#define P_READ (2<<7)
#define P_ERASE (3<<7)
#define P_EWDS (0<<7)
#define P_WRAL (0<<7)
#define P_ERAL (0<<7)
#define P_EWEN (0<<7)
#define P_A_EWDS (0<<5)
#define P_A_WRAL (1<<5)
#define P_A_ERAL (2<<5)
#define P_A_EWEN (3<<5)
struct ssp_configuration {
int device;
int mode;
int speed;
int frame_size_write;
int frame_size_read;
};
static struct ssp_configuration ssp_configuration;
static spinlock_t ssp_lock;
static void enable_cs (void)
{
switch (ssp_configuration.device) {
case DEVICE_EEPROM:
CPLD_SPI |= CPLD_SPI_CS_EEPROM;
break;
}
udelay (T_CSS);
}
static void disable_cs (void)
{
switch (ssp_configuration.device) {
case DEVICE_EEPROM:
CPLD_SPI &= ~CPLD_SPI_CS_EEPROM;
break;
}
udelay (T_CS);
}
static void pulse_clock (void)
{
CPLD_SPI |= CPLD_SPI_SCLK;
udelay (T_SKH);
CPLD_SPI &= ~CPLD_SPI_SCLK;
udelay (T_SKL);
}
/* execute_spi_command
sends an spi command to a device. It first sends cwrite bits from
v. If cread is greater than zero it will read cread bits
(discarding the leading 0 bit) and return them. If cread is less
than zero it will check for completetion status and return 0 on
success or -1 on timeout. If cread is zero it does nothing other
than sending the command.
On the LPD7A400, we can only read or write multiples of 8 bits on
the codec and the touch screen device. Here, we round up.
*/
static int execute_spi_command (int v, int cwrite, int cread)
{
unsigned long l = 0;
#if defined (CONFIG_MACH_LPD7A400)
/* The codec and touch devices cannot be bit-banged. Instead,
* the CPLD provides an eight-bit shift register and a crude
* interface. */
if ( ssp_configuration.device == DEVICE_CODEC
|| ssp_configuration.device == DEVICE_TOUCH) {
int select = 0;
PRINTK ("spi(%d %d.%d) 0x%04x",
ssp_configuration.device, cwrite, cread,
v);
#if defined (TALK)
if (ssp_configuration.device == DEVICE_CODEC)
PRINTK (" 0x%03x -> %2d", v & 0x1ff, (v >> 9) & 0x7f);
#endif
PRINTK ("\n");
if (ssp_configuration.device == DEVICE_CODEC)
select = CPLD_SPIC_CS_CODEC;
if (ssp_configuration.device == DEVICE_TOUCH)
select = CPLD_SPIC_CS_TOUCH;
if (cwrite) {
for (cwrite = (cwrite + 7)/8; cwrite-- > 0; ) {
CPLD_SPID = (v >> (8*cwrite)) & 0xff;
CPLD_SPIC = select | CPLD_SPIC_LOAD;
while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
;
CPLD_SPIC = select;
while (!(CPLD_SPIC & CPLD_SPIC_DONE))
;
}
v = 0;
}
if (cread) {
mdelay (2); /* *** FIXME: required by ads7843? */
v = 0;
for (cread = (cread + 7)/8; cread-- > 0;) {
CPLD_SPID = 0;
CPLD_SPIC = select | CPLD_SPIC_READ
| CPLD_SPIC_START;
while (!(CPLD_SPIC & CPLD_SPIC_LOADED))
;
CPLD_SPIC = select | CPLD_SPIC_READ;
while (!(CPLD_SPIC & CPLD_SPIC_DONE))
;
v = (v << 8) | CPLD_SPID;
}
}
return v;
}
#endif
PRINTK ("spi(%d) 0x%04x -> 0x%x\r\n", ssp_configuration.device,
v & 0x1ff, (v >> 9) & 0x7f);
enable_cs ();
v <<= CPLD_SPI_TX_SHIFT; /* Correction for position of SPI_TX bit */
while (cwrite--) {
CPLD_SPI
= (CPLD_SPI & ~CPLD_SPI_TX)
| ((v >> cwrite) & CPLD_SPI_TX);
udelay (T_DIS);
pulse_clock ();
}
if (cread < 0) {
int delay = 10;
disable_cs ();
udelay (1);
enable_cs ();
l = -1;
do {
if (CPLD_SPI & CPLD_SPI_RX) {
l = 0;
break;
}
} while (udelay (1), --delay);
}
else
/* We pulse the clock before the data to skip the leading zero. */
while (cread-- > 0) {
pulse_clock ();
l = (l<<1)
| (((CPLD_SPI & CPLD_SPI_RX)
>> CPLD_SPI_RX_SHIFT) & 0x1);
}
disable_cs ();
return l;
}
static int ssp_init (void)
{
spin_lock_init (&ssp_lock);
memset (&ssp_configuration, 0, sizeof (ssp_configuration));
return 0;
}
/* ssp_chip_select
drops the chip select line for the CPLD shift-register controlled
devices. It doesn't enable chip
*/
static void ssp_chip_select (int enable)
{
#if defined (CONFIG_MACH_LPD7A400)
int select;
if (ssp_configuration.device == DEVICE_CODEC)
select = CPLD_SPIC_CS_CODEC;
else if (ssp_configuration.device == DEVICE_TOUCH)
select = CPLD_SPIC_CS_TOUCH;
else
return;
if (enable)
CPLD_SPIC = select;
else
CPLD_SPIC = 0;
#endif
}
static void ssp_acquire (void)
{
spin_lock (&ssp_lock);
}
static void ssp_release (void)
{
ssp_chip_select (0); /* just in case */
spin_unlock (&ssp_lock);
}
static int ssp_configure (int device, int mode, int speed,
int frame_size_write, int frame_size_read)
{
ssp_configuration.device = device;
ssp_configuration.mode = mode;
ssp_configuration.speed = speed;
ssp_configuration.frame_size_write = frame_size_write;
ssp_configuration.frame_size_read = frame_size_read;
return 0;
}
static int ssp_read (void)
{
return execute_spi_command (0, 0, ssp_configuration.frame_size_read);
}
static int ssp_write (u16 data)
{
execute_spi_command (data, ssp_configuration.frame_size_write, 0);
return 0;
}
static int ssp_write_read (u16 data)
{
return execute_spi_command (data, ssp_configuration.frame_size_write,
ssp_configuration.frame_size_read);
}
struct ssp_driver lh7a40x_cpld_ssp_driver = {
.init = ssp_init,
.acquire = ssp_acquire,
.release = ssp_release,
.configure = ssp_configure,
.chip_select = ssp_chip_select,
.read = ssp_read,
.write = ssp_write,
.write_read = ssp_write_read,
};
MODULE_AUTHOR("Marc Singer");
MODULE_DESCRIPTION("LPD7A40X CPLD SPI driver");
MODULE_LICENSE("GPL");