diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 18e9beaec465..9895539533d6 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -897,7 +897,24 @@ CONFIG_UNIX98_PTYS=y
 #
 # I2C support
 #
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Hardware Monitoring support
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 0a41080d2266..3a22d84e1047 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -85,7 +85,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 	{
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
+		.irq		= IRQ_IXP4XX_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 526acbc32067..2a58499c0968 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -77,6 +77,8 @@ config MACH_AKITA
 	depends PXA_SHARPSL_27x
 	select PXA_SHARP_Cxx00
 	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
 
 config MACH_SPITZ
 	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c9a03981b785..330695b6b19d 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -155,14 +155,19 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
  *  space mappings, we can be lazy and remember that we may have dirty
  *  kernel cache lines for later.  Otherwise, we assume we have
  *  aliasing mappings.
+ *
+ * Note that we disable the lazy flush for SMP.
  */
 void flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping = page_mapping(page);
 
+#ifndef CONFIG_SMP
 	if (mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
-	else {
+	else
+#endif
+	{
 		__flush_dcache_page(mapping, page);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, page);
diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h
index 71ca7d412687..d5dc624f452a 100644
--- a/include/asm-arm/semaphore.h
+++ b/include/asm-arm/semaphore.h
@@ -47,11 +47,6 @@ static inline void init_MUTEX_LOCKED(struct semaphore *sem)
 	sema_init(sem, 0);
 }
 
-static inline int sema_count(struct semaphore *sem)
-{
-	return atomic_read(&sem->count);
-}
-
 /*
  * special register calling convention
  */
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 6ed4f916b166..43ad4e55878c 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -30,6 +30,9 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock)
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%1]\n"
 "	teq	%0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfene\n"
+#endif
 "	strexeq	%0, %2, [%1]\n"
 "	teqeq	%0, #0\n"
 "	bne	1b"
@@ -65,7 +68,11 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lock)
 	smp_mb();
 
 	__asm__ __volatile__(
-"	str	%1, [%0]"
+"	str	%1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
+"	sev"
+#endif
 	:
 	: "r" (&lock->lock), "r" (0)
 	: "cc");
@@ -87,6 +94,9 @@ static inline void __raw_write_lock(raw_rwlock_t *rw)
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%1]\n"
 "	teq	%0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfene\n"
+#endif
 "	strexeq	%0, %2, [%1]\n"
 "	teq	%0, #0\n"
 "	bne	1b"
@@ -122,7 +132,11 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 	smp_mb();
 
 	__asm__ __volatile__(
-	"str	%1, [%0]"
+	"str	%1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
+"	sev\n"
+#endif
 	:
 	: "r" (&rw->lock), "r" (0)
 	: "cc");
@@ -148,6 +162,9 @@ static inline void __raw_read_lock(raw_rwlock_t *rw)
 "1:	ldrex	%0, [%2]\n"
 "	adds	%0, %0, #1\n"
 "	strexpl	%1, %0, [%2]\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfemi\n"
+#endif
 "	rsbpls	%0, %1, #0\n"
 "	bmi	1b"
 	: "=&r" (tmp), "=&r" (tmp2)
@@ -169,6 +186,11 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw)
 "	strex	%1, %0, [%2]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
+#ifdef CONFIG_CPU_32v6K
+"\n	cmp	%0, #0\n"
+"	mcreq   p15, 0, %0, c7, c10, 4\n"
+"	seveq"
+#endif
 	: "=&r" (tmp), "=&r" (tmp2)
 	: "r" (&rw->lock)
 	: "cc");