OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

media: drivers: remove "/**" from non-kernel-doc comments 

Several comments are wrongly tagged as kernel-doc, causing
those warnings:

  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq'
  drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch'
  drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp'
  drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand  *
   on line 652 - I thought it was a doc line
  drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op'
  drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand  * (reg, val) commad list to initialize this module.
   on line 301 - I thought it was a doc line
  drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf'
  drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id'
  drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface'
  drivers/media/i2c/ov5647.c:432: warning: Cannot understand  * @short Subdev core operations registration
   on line 432 - I thought it was a doc line
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf'
  drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen'
  drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv '
  drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei '
  drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand  * @frame_width: width in pixels of the buffer containing the input frame
   on line 150 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand  * @ slice_size: slice size
   on line 356 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand  * @ bitstream_size: bitstream size
   on line 369 - I thought it was a doc line
  drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand  * @seq_info:  sequence information buffer
   on line 395 - I thought it was a doc line
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe'
  drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i'
  drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f'
  drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb '
  drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv'
  drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; '
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state'
  drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency'
  drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv'
  drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv'
  drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt'
  drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap'

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Mauro Carvalho Chehab 2017-11-29 08:33:45 -05:00
parent ed050c2180
commit cba862dc73
19 changed files with 48 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/media/dvb-frontends/sp887x.c
View File

@ -57,7 +57,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
int ret;
if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
/**
/*
* in case of soft reset we ignore ACK errors...
*/
if (!(reg == 0xf1a && data == 0x000 &&
@ -130,7 +130,7 @@ static void sp887x_setup_agc (struct sp887x_state* state)
#define BLOCKSIZE 30
#define FW_SIZE 0x4000
/**
/*
* load firmware and setup MPEG interface...
*/
static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
@ -279,7 +279,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
return 0;
}
/**
/*
* estimates division of two 24bit numbers,
* derived from the ves1820/stv0299 driver code
*/

2
drivers/media/dvb-frontends/tua6100.c
View File

@ -1,4 +1,4 @@
/**
/*
* Driver for Infineon tua6100 pll.
*
* (c) 2006 Andrew de Quincey

8
drivers/media/dvb-frontends/zl10036.c
View File

@ -1,4 +1,4 @@
/**
/*
* Driver for Zarlink zl10036 DVB-S silicon tuner
*
* Copyright (C) 2006 Tino Reichardt
@ -157,7 +157,7 @@ static int zl10036_sleep(struct dvb_frontend *fe)
return ret;
}
/**
/*
* register map of the ZL10036/ZL10038
*
* reg[default] content
@ -219,7 +219,7 @@ static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
if (fbw <= 28820) {
br = _BR_MAXIMUM;
} else {
/**
/*
* f(bw)=34,6MHz f(xtal)=10.111MHz
* br = (10111/34600) * 63 * 1/K = 14;
*/
@ -315,7 +315,7 @@ static int zl10036_set_params(struct dvb_frontend *fe)
|| (frequency > fe->ops.info.frequency_max))
return -EINVAL;
/**
/*
* alpha = 1.35 for dvb-s
* fBW = (alpha*symbolrate)/(2*0.8)
* 1.35 / (2*0.8) = 27 / 32

4
drivers/media/i2c/ov5647.c
View File

@ -428,8 +428,8 @@ static int ov5647_sensor_set_register(struct v4l2_subdev *sd,
}
#endif
/**
* @short Subdev core operations registration
/*
* Subdev core operations registration
*/
static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = {
.s_power = ov5647_sensor_power,

2
drivers/media/pci/solo6x10/solo6x10-enc.c
View File

@ -175,7 +175,7 @@ out:
return 0;
}
/**
/*
* Set channel Quality Profile (0-3).
*/
void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,

2
drivers/media/platform/rcar_fdp1.c
View File

@ -1132,7 +1132,7 @@ static int fdp1_device_process(struct fdp1_ctx *ctx)
* mem2mem callbacks
*/
/**
/*
* job_ready() - check whether an instance is ready to be scheduled to run
*/
static int fdp1_m2m_job_ready(void *priv)

2
drivers/media/platform/sh_veu.c
View File

@ -267,7 +267,7 @@ static void sh_veu_process(struct sh_veu_dev *veu,
sh_veu_reg_write(veu, VEU_EIER, 1); /* enable interrupt in VEU */
}
/**
/*
* sh_veu_device_run() - prepares and starts the device
*
* This will be called by the framework when it decides to schedule a particular

18
drivers/media/platform/sti/hva/hva-h264.c
View File

@ -134,7 +134,7 @@ enum hva_h264_sei_payload_type {
SEI_FRAME_PACKING_ARRANGEMENT = 45
};
/**
/*
* stereo Video Info struct
*/
struct hva_h264_stereo_video_sei {
@ -146,7 +146,9 @@ struct hva_h264_stereo_video_sei {
u8 right_view_self_contained_flag;
};
/**
/*
* struct hva_h264_td
*
* @frame_width: width in pixels of the buffer containing the input frame
* @frame_height: height in pixels of the buffer containing the input frame
* @frame_num: the parameter to be written in the slice header
@ -352,7 +354,9 @@ struct hva_h264_td {
u32 addr_brc_in_out_parameter;
};
/**
/*
* struct hva_h264_slice_po
*
* @ slice_size: slice size
* @ slice_start_time: start time
* @ slice_stop_time: stop time
@ -365,7 +369,9 @@ struct hva_h264_slice_po {
u32 slice_num;
};
/**
/*
* struct hva_h264_po
*
* @ bitstream_size: bitstream size
* @ dct_bitstream_size: dtc bitstream size
* @ stuffing_bits: number of stuffing bits inserted by the encoder
@ -391,7 +397,9 @@ struct hva_h264_task {
struct hva_h264_po po;
};
/**
/*
* struct hva_h264_ctx
*
* @seq_info: sequence information buffer
* @ref_frame: reference frame buffer
* @rec_frame: reconstructed frame buffer

2
drivers/media/platform/ti-vpe/vpe.c
View File

@ -926,7 +926,7 @@ static struct vpe_ctx *file2ctx(struct file *file)
* mem2mem callbacks
*/
/**
/*
* job_ready() - check whether an instance is ready to be scheduled to run
*/
static int job_ready(void *priv)

2
drivers/media/platform/vim2m.c
View File

@ -343,7 +343,7 @@ static void schedule_irq(struct vim2m_dev *dev, int msec_timeout)
* mem2mem callbacks
*/
/**
/*
* job_ready() - check whether an instance is ready to be scheduled to run
*/
static int job_ready(void *priv)

6
drivers/media/rc/st_rc.c
View File

@ -49,7 +49,7 @@ struct st_rc_device {
#define IRB_RX_NOISE_SUPPR 0x5c /* noise suppression */
#define IRB_RX_POLARITY_INV 0x68 /* polarity inverter */
/**
/*
* IRQ set: Enable full FIFO 1 -> bit 3;
* Enable overrun IRQ 1 -> bit 2;
* Enable last symbol IRQ 1 -> bit 1:
@ -72,7 +72,7 @@ static void st_rc_send_lirc_timeout(struct rc_dev *rdev)
ir_raw_event_store(rdev, &ev);
}
/**
/*
* RX graphical example to better understand the difference between ST IR block
* output and standard definition used by LIRC (and most of the world!)
*
@ -317,7 +317,7 @@ static int st_rc_probe(struct platform_device *pdev)
device_init_wakeup(dev, true);
dev_pm_set_wake_irq(dev, rc_dev->irq);
/**
/*
* for LIRC_MODE_MODE2 or LIRC_MODE_PULSE or LIRC_MODE_RAW
* lircd expects a long space first before a signal train to sync.
*/

6
drivers/media/rc/streamzap.c
View File

@ -191,7 +191,7 @@ static void sz_push_half_space(struct streamzap_ir *sz,
sz_push_full_space(sz, value & SZ_SPACE_MASK);
}
/**
/*
* streamzap_callback - usb IRQ handler callback
*
* This procedure is invoked on reception of data from
@ -321,7 +321,7 @@ out:
return NULL;
}
/**
/*
* streamzap_probe
*
* Called by usb-core to associated with a candidate device
@ -450,7 +450,7 @@ free_sz:
return retval;
}
/**
/*
* streamzap_disconnect
*
* Called by the usb core when the device is removed from the system.

2
drivers/media/usb/dvb-usb/cinergyT2-fe.c
View File

@ -26,7 +26,7 @@
#include "cinergyT2.h"
/**
/*
* convert linux-dvb frontend parameter set into TPS.
* See ETSI ETS-300744, section 4.6.2, table 9 for details.
*

8
drivers/media/usb/dvb-usb/dib0700_devices.c
View File

@ -1677,10 +1677,10 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
return -EINVAL;
}
/** Update PLL if needed ratio **/
/* Update PLL if needed ratio */
state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0);
/** Get optimize PLL ratio to remove spurious **/
/* Get optimize PLL ratio to remove spurious */
pll_ratio = dib8090_compute_pll_parameters(fe);
if (pll_ratio == 17)
timf = 21387946;
@ -1691,7 +1691,7 @@ static int dib8096_set_param_override(struct dvb_frontend *fe)
else
timf = 18179756;
/** Update ratio **/
/* Update ratio */
state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio);
state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf);
@ -3357,7 +3357,7 @@ static int novatd_sleep_override(struct dvb_frontend* fe)
return state->sleep(fe);
}
/**
/*
* novatd_frontend_attach - Nova-TD specific attach
*
* Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for

2
drivers/media/usb/dvb-usb/friio-fe.c
View File

@ -297,7 +297,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
}
/**
/*
* (reg, val) commad list to initialize this module.
* captured on a Windows box.
*/

2
drivers/media/usb/dvb-usb/friio.c
View File

@ -21,7 +21,7 @@ MODULE_PARM_DESC(debug,
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
/**
/*
* Indirect I2C access to the PLL via FE.
* whole I2C protocol data to the PLL is sent via the FE's I2C register.
* This is done by a control msg to the FE with the I2C data accompanied, and

2
drivers/media/usb/gspca/ov519.c
View File

@ -1,4 +1,4 @@
/**
/*
* OV519 driver
*
* Copyright (C) 2008-2011 Jean-François Moine <moinejf@free.fr>

7
drivers/media/usb/pwc/pwc-dec23.c
View File

@ -649,11 +649,10 @@ static void DecompressBand23(struct pwc_dec23_private *pdec,
}
/**
*
* Uncompress a pwc23 buffer.
*
* src: raw data
* dst: image output
* @pdev: pointer to pwc device's internal struct
* @src: raw data
* @dst: image output
*/
void pwc_dec23_decompress(struct pwc_device *pdev,
const void *src,

6
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
View File

@ -76,7 +76,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define TTUSB_REV_2_2 0x22
#define TTUSB_BUDGET_NAME "ttusb_stc_fw"
/**
/*
* since we're casting (struct ttusb*) <-> (struct dvb_demux*) around
* the dvb_demux field must be the first in struct!!
*/
@ -713,7 +713,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
}
}
/**
/*
* if length is valid and we reached the end:
* goto next muxpack
*/
@ -729,7 +729,7 @@ static void ttusb_process_frame(struct ttusb *ttusb, u8 * data, int len)
/* maximum bytes, until we know the length */
ttusb->muxpack_len = 2;
/**
/*
* no muxpacks left?
* return to search-sync state
*/