spi: dt-bindings: Convert Arm pl022 to json-schema
Convert the Arm pl022 binding to DT schema format. The clock binding was missing, so it is added to the schema. It really should be required as well, but there are some platforms (spear) not yet using DT clock binding. Cc: Mark Brown <broonie@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-spi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Rob Herring
Mark Brown
parent
af505208e9
commit
cc0f6e96c4
|
|
@ -0,0 +1,165 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/spi/spi-pl022.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ARM PL022 SPI controller
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
|
||||
allOf:
|
||||
- $ref: "spi-controller.yaml#"
|
||||
|
||||
# We need a select here so we don't match all nodes with 'arm,primecell'
|
||||
select:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: arm,pl022
|
||||
required:
|
||||
- compatible
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: arm,pl022
|
||||
- const: arm,primecell
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 2
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- enum:
|
||||
- SSPCLK
|
||||
- sspclk
|
||||
- const: apb_pclk
|
||||
|
||||
pl022,autosuspend-delay:
|
||||
description: delay in ms following transfer completion before the
|
||||
runtime power management system suspends the device. A setting of 0
|
||||
indicates no delay and the device will be suspended immediately.
|
||||
$ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
|
||||
pl022,rt:
|
||||
description: indicates the controller should run the message pump with realtime
|
||||
priority to minimise the transfer latency on the bus (boolean)
|
||||
type: boolean
|
||||
|
||||
dmas:
|
||||
description:
|
||||
Two or more DMA channel specifiers following the convention outlined
|
||||
in bindings/dma/dma.txt
|
||||
minItems: 2
|
||||
maxItems: 32
|
||||
|
||||
dma-names:
|
||||
description:
|
||||
There must be at least one channel named "tx" for transmit and named "rx"
|
||||
for receive.
|
||||
minItems: 2
|
||||
maxItems: 32
|
||||
additionalItems: true
|
||||
items:
|
||||
- const: rx
|
||||
- const: tx
|
||||
|
||||
patternProperties:
|
||||
"^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
|
||||
type: object
|
||||
# SPI slave nodes must be children of the SPI master node and can
|
||||
# contain the following properties.
|
||||
properties:
|
||||
pl022,interface:
|
||||
description: SPI interface type
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- enum:
|
||||
- 0 # SPI
|
||||
- 1 # Texas Instruments Synchronous Serial Frame Format
|
||||
- 2 # Microwire (Half Duplex)
|
||||
|
||||
pl022,com-mode:
|
||||
description: Specifies the transfer mode
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- enum:
|
||||
- 0 # interrupt mode
|
||||
- 1 # polling mode
|
||||
- 2 # DMA mode
|
||||
default: 1
|
||||
|
||||
pl022,rx-level-trig:
|
||||
description: Rx FIFO watermark level
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- minimum: 0
|
||||
maximum: 4
|
||||
|
||||
pl022,tx-level-trig:
|
||||
description: Tx FIFO watermark level
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- minimum: 0
|
||||
maximum: 4
|
||||
|
||||
pl022,ctrl-len:
|
||||
description: Microwire interface - Control length
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- minimum: 0x03
|
||||
maximum: 0x1f
|
||||
|
||||
pl022,wait-state:
|
||||
description: Microwire interface - Wait state
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
pl022,duplex:
|
||||
description: Microwire interface - Full/Half duplex
|
||||
allOf:
|
||||
- $ref: "/schemas/types.yaml#/definitions/uint32"
|
||||
- enum: [ 0, 1 ]
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
- |
|
||||
spi@e0100000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <0xe0100000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <0 31 0x4>;
|
||||
dmas = <&dma_controller 23 1>,
|
||||
<&dma_controller 24 0>;
|
||||
dma-names = "rx", "tx";
|
||||
|
||||
m25p80@1 {
|
||||
compatible = "st,m25p80";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <12000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
pl022,interface = <0>;
|
||||
pl022,com-mode = <0x2>;
|
||||
pl022,rx-level-trig = <0>;
|
||||
pl022,tx-level-trig = <0>;
|
||||
pl022,ctrl-len = <0x11>;
|
||||
pl022,wait-state = <0>;
|
||||
pl022,duplex = <0>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -1,70 +0,0 @@
|
|||
ARM PL022 SPI controller
|
||||
|
||||
Required properties:
|
||||
- compatible : "arm,pl022", "arm,primecell"
|
||||
- reg : Offset and length of the register set for the device
|
||||
- interrupts : Should contain SPI controller interrupt
|
||||
- num-cs : total number of chipselects
|
||||
|
||||
Optional properties:
|
||||
- cs-gpios : should specify GPIOs used for chipselects.
|
||||
The gpios will be referred to as reg = <index> in the SPI child nodes.
|
||||
If unspecified, a single SPI device without a chip select can be used.
|
||||
- pl022,autosuspend-delay : delay in ms following transfer completion before
|
||||
the runtime power management system suspends the
|
||||
device. A setting of 0 indicates no delay and the
|
||||
device will be suspended immediately
|
||||
- pl022,rt : indicates the controller should run the message pump with realtime
|
||||
priority to minimise the transfer latency on the bus (boolean)
|
||||
- dmas : Two or more DMA channel specifiers following the convention outlined
|
||||
in bindings/dma/dma.txt
|
||||
- dma-names: Names for the dma channels, if present. There must be at
|
||||
least one channel named "tx" for transmit and named "rx" for
|
||||
receive.
|
||||
|
||||
|
||||
SPI slave nodes must be children of the SPI master node and can
|
||||
contain the following properties.
|
||||
|
||||
- pl022,interface : interface type:
|
||||
0: SPI
|
||||
1: Texas Instruments Synchronous Serial Frame Format
|
||||
2: Microwire (Half Duplex)
|
||||
- pl022,com-mode : specifies the transfer mode:
|
||||
0: interrupt mode
|
||||
1: polling mode (default mode if property not present)
|
||||
2: DMA mode
|
||||
- pl022,rx-level-trig : Rx FIFO watermark level
|
||||
- pl022,tx-level-trig : Tx FIFO watermark level
|
||||
- pl022,ctrl-len : Microwire interface: Control length
|
||||
- pl022,wait-state : Microwire interface: Wait state
|
||||
- pl022,duplex : Microwire interface: Full/Half duplex
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
spi@e0100000 {
|
||||
compatible = "arm,pl022", "arm,primecell";
|
||||
reg = <0xe0100000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <0 31 0x4>;
|
||||
dmas = <&dma-controller 23 1>,
|
||||
<&dma-controller 24 0>;
|
||||
dma-names = "rx", "tx";
|
||||
|
||||
m25p80@1 {
|
||||
compatible = "st,m25p80";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <12000000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
pl022,interface = <0>;
|
||||
pl022,com-mode = <0x2>;
|
||||
pl022,rx-level-trig = <0>;
|
||||
pl022,tx-level-trig = <0>;
|
||||
pl022,ctrl-len = <0x11>;
|
||||
pl022,wait-state = <0>;
|
||||
pl022,duplex = <0>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue