Merge branch 'smsc911x-armplatforms' of git://github.com/steveglen/linux-2.6

This commit is contained in:
Russell King 2009-04-02 23:22:11 +01:00 committed by Russell King
commit cd02938a82
1823 changed files with 132978 additions and 58593 deletions

View File

@ -495,6 +495,11 @@ S: Kopmansg 2
S: 411 13 Goteborg
S: Sweden
N: Paul Bristow
E: paul@paulbristow.net
W: http://paulbristow.net/linux/idefloppy.html
D: Maintainer of IDE/ATAPI floppy driver
N: Dominik Brodowski
E: linux@brodo.de
W: http://www.brodo.de/
@ -2642,6 +2647,10 @@ S: C/ Mieses 20, 9-B
S: Valladolid 47009
S: Spain
N: Gadi Oxman
E: gadio@netvision.net.il
D: Original author and maintainer of IDE/ATAPI floppy/tape drivers
N: Greg Page
E: gpage@sovereign.org
D: IPX development and support

View File

@ -41,6 +41,49 @@ Description:
for the device and attempt to bind to it. For example:
# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
What: /sys/bus/pci/drivers/.../remove_id
Date: February 2009
Contact: Chris Wright <chrisw@sous-sol.org>
Description:
Writing a device ID to this file will remove an ID
that was dynamically added via the new_id sysfs entry.
The format for the device ID is:
VVVV DDDD SVVV SDDD CCCC MMMM. That is Vendor ID, Device
ID, Subsystem Vendor ID, Subsystem Device ID, Class,
and Class Mask. The Vendor ID and Device ID fields are
required, the rest are optional. After successfully
removing an ID, the driver will no longer support the
device. This is useful to ensure auto probing won't
match the driver to the device. For example:
# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
What: /sys/bus/pci/rescan
Date: January 2009
Contact: Linux PCI developers <linux-pci@vger.kernel.org>
Description:
Writing a non-zero value to this attribute will
force a rescan of all PCI buses in the system, and
re-discover previously removed devices.
Depends on CONFIG_HOTPLUG.
What: /sys/bus/pci/devices/.../remove
Date: January 2009
Contact: Linux PCI developers <linux-pci@vger.kernel.org>
Description:
Writing a non-zero value to this attribute will
hot-remove the PCI device and any of its children.
Depends on CONFIG_HOTPLUG.
What: /sys/bus/pci/devices/.../rescan
Date: January 2009
Contact: Linux PCI developers <linux-pci@vger.kernel.org>
Description:
Writing a non-zero value to this attribute will
force a rescan of the device's parent bus and all
child buses, and re-discover devices removed earlier
from this part of the device tree.
Depends on CONFIG_HOTPLUG.
What: /sys/bus/pci/devices/.../vpd
Date: February 2008
Contact: Ben Hutchings <bhutchings@solarflare.com>
@ -52,3 +95,30 @@ Description:
that some devices may have malformatted data. If the
underlying VPD has a writable section then the
corresponding section of this file will be writable.
What: /sys/bus/pci/devices/.../virtfnN
Date: March 2009
Contact: Yu Zhao <yu.zhao@intel.com>
Description:
This symbolic link appears when hardware supports the SR-IOV
capability and the Physical Function driver has enabled it.
The symbolic link points to the PCI device sysfs entry of the
Virtual Function whose index is N (0...MaxVFs-1).
What: /sys/bus/pci/devices/.../dep_link
Date: March 2009
Contact: Yu Zhao <yu.zhao@intel.com>
Description:
This symbolic link appears when hardware supports the SR-IOV
capability and the Physical Function driver has enabled it,
and this device has vendor specific dependencies with others.
The symbolic link points to the PCI device sysfs entry of
Physical Function this device depends on.
What: /sys/bus/pci/devices/.../physfn
Date: March 2009
Contact: Yu Zhao <yu.zhao@intel.com>
Description:
This symbolic link appears when a device is a Virtual Function.
The symbolic link points to the PCI device sysfs entry of the
Physical Function this device associates with.

View File

@ -0,0 +1,81 @@
What: /sys/fs/ext4/<disk>/mb_stats
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
Controls whether the multiblock allocator should
collect statistics, which are shown during the unmount.
1 means to collect statistics, 0 means not to collect
statistics
What: /sys/fs/ext4/<disk>/mb_group_prealloc
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
The multiblock allocator will round up allocation
requests to a multiple of this tuning parameter if the
stripe size is not set in the ext4 superblock
What: /sys/fs/ext4/<disk>/mb_max_to_scan
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
The maximum number of extents the multiblock allocator
will search to find the best extent
What: /sys/fs/ext4/<disk>/mb_min_to_scan
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
The minimum number of extents the multiblock allocator
will search to find the best extent
What: /sys/fs/ext4/<disk>/mb_order2_req
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
Tuning parameter which controls the minimum size for
requests (as a power of 2) where the buddy cache is
used
What: /sys/fs/ext4/<disk>/mb_stream_req
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
Files which have fewer blocks than this tunable
parameter will have their blocks allocated out of a
block group specific preallocation pool, so that small
files are packed closely together. Each large file
will have its blocks allocated out of its own unique
preallocation pool.
What: /sys/fs/ext4/<disk>/inode_readahead
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
Tuning parameter which controls the maximum number of
inode table blocks that ext4's inode table readahead
algorithm will pre-read into the buffer cache
What: /sys/fs/ext4/<disk>/delayed_allocation_blocks
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
This file is read-only and shows the number of blocks
that are dirty in the page cache, but which do not
have their location in the filesystem allocated yet.
What: /sys/fs/ext4/<disk>/lifetime_write_kbytes
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
This file is read-only and shows the number of kilobytes
of data that have been written to this filesystem since it was
created.
What: /sys/fs/ext4/<disk>/session_write_kbytes
Date: March 2008
Contact: "Theodore Ts'o" <tytso@mit.edu>
Description:
This file is read-only and shows the number of
kilobytes of data that have been written to this
filesystem since it was mounted.

View File

@ -609,3 +609,109 @@ size is the size (and should be a page-sized multiple).
The return value will be either a pointer to the processor virtual
address of the memory, or an error (via PTR_ERR()) if any part of the
region is occupied.
Part III - Debug drivers use of the DMA-API
-------------------------------------------
The DMA-API as described above as some constraints. DMA addresses must be
released with the corresponding function with the same size for example. With
the advent of hardware IOMMUs it becomes more and more important that drivers
do not violate those constraints. In the worst case such a violation can
result in data corruption up to destroyed filesystems.
To debug drivers and find bugs in the usage of the DMA-API checking code can
be compiled into the kernel which will tell the developer about those
violations. If your architecture supports it you can select the "Enable
debugging of DMA-API usage" option in your kernel configuration. Enabling this
option has a performance impact. Do not enable it in production kernels.
If you boot the resulting kernel will contain code which does some bookkeeping
about what DMA memory was allocated for which device. If this code detects an
error it prints a warning message with some details into your kernel log. An
example warning message may look like this:
------------[ cut here ]------------
WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
check_unmap+0x203/0x490()
Hardware name:
forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
function [device address=0x00000000640444be] [size=66 bytes] [mapped as
single] [unmapped as page]
Modules linked in: nfsd exportfs bridge stp llc r8169
Pid: 0, comm: swapper Tainted: G W 2.6.28-dmatest-09289-g8bb99c0 #1
Call Trace:
<IRQ> [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
[<ffffffff80647b70>] _spin_unlock+0x10/0x30
[<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
[<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
[<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
[<ffffffff80252f96>] queue_work+0x56/0x60
[<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
[<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
[<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
[<ffffffff80235177>] find_busiest_group+0x207/0x8a0
[<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
[<ffffffff803c7ea3>] check_unmap+0x203/0x490
[<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
[<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
[<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
[<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
[<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
[<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
[<ffffffff8020c093>] ret_from_intr+0x0/0xa
<EOI> <4>---[ end trace f6435a98e2a38c0e ]---
The driver developer can find the driver and the device including a stacktrace
of the DMA-API call which caused this warning.
Per default only the first error will result in a warning message. All other
errors will only silently counted. This limitation exist to prevent the code
from flooding your kernel log. To support debugging a device driver this can
be disabled via debugfs. See the debugfs interface documentation below for
details.
The debugfs directory for the DMA-API debugging code is called dma-api/. In
this directory the following files can currently be found:
dma-api/all_errors This file contains a numeric value. If this
value is not equal to zero the debugging code
will print a warning for every error it finds
into the kernel log. Be carefull with this
option. It can easily flood your logs.
dma-api/disabled This read-only file contains the character 'Y'
if the debugging code is disabled. This can
happen when it runs out of memory or if it was
disabled at boot time
dma-api/error_count This file is read-only and shows the total
numbers of errors found.
dma-api/num_errors The number in this file shows how many
warnings will be printed to the kernel log
before it stops. This number is initialized to
one at system boot and be set by writing into
this file
dma-api/min_free_entries
This read-only file can be read to get the
minimum number of free dma_debug_entries the
allocator has ever seen. If this value goes
down to zero the code will disable itself
because it is not longer reliable.
dma-api/num_free_entries
The current number of free dma_debug_entries
in the allocator.
If you have this code compiled into your kernel it will be enabled by default.
If you want to boot without the bookkeeping anyway you can provide
'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
Notice that you can not enable it again at runtime. You have to reboot to do
so.
When the code disables itself at runtime this is most likely because it ran
out of dma_debug_entries. These entries are preallocated at boot. The number
of preallocated entries is defined per architecture. If it is too low for you
boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
architectural default.

View File

@ -199,6 +199,7 @@ X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
!Edrivers/pci/rom.c
!Edrivers/pci/iov.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c

View File

@ -117,9 +117,6 @@ static int __init init_procfs_example(void)
rv = -ENOMEM;
goto out;
}
example_dir->owner = THIS_MODULE;
/* create jiffies using convenience function */
jiffies_file = create_proc_read_entry("jiffies",
0444, example_dir,
@ -130,8 +127,6 @@ static int __init init_procfs_example(void)
goto no_jiffies;
}
jiffies_file->owner = THIS_MODULE;
/* create foo and bar files using same callback
* functions
*/
@ -146,7 +141,6 @@ static int __init init_procfs_example(void)
foo_file->data = &foo_data;
foo_file->read_proc = proc_read_foobar;
foo_file->write_proc = proc_write_foobar;
foo_file->owner = THIS_MODULE;
bar_file = create_proc_entry("bar", 0644, example_dir);
if(bar_file == NULL) {
@ -159,7 +153,6 @@ static int __init init_procfs_example(void)
bar_file->data = &bar_data;
bar_file->read_proc = proc_read_foobar;
bar_file->write_proc = proc_write_foobar;
bar_file->owner = THIS_MODULE;
/* create symlink */
symlink = proc_symlink("jiffies_too", example_dir,
@ -169,8 +162,6 @@ static int __init init_procfs_example(void)
goto no_symlink;
}
symlink->owner = THIS_MODULE;
/* everything OK */
printk(KERN_INFO "%s %s initialised\n",
MODULE_NAME, MODULE_VERS);

View File

@ -4,506 +4,356 @@
Revised Feb 12, 2004 by Martine Silbermann
email: Martine.Silbermann@hp.com
Revised Jun 25, 2004 by Tom L Nguyen
Revised Jul 9, 2008 by Matthew Wilcox <willy@linux.intel.com>
Copyright 2003, 2008 Intel Corporation
1. About this guide
This guide describes the basics of Message Signaled Interrupts (MSI),
the advantages of using MSI over traditional interrupt mechanisms,
and how to enable your driver to use MSI or MSI-X. Also included is
a Frequently Asked Questions (FAQ) section.
This guide describes the basics of Message Signaled Interrupts (MSIs),
the advantages of using MSI over traditional interrupt mechanisms, how
to change your driver to use MSI or MSI-X and some basic diagnostics to
try if a device doesn't support MSIs.
1.1 Terminology
PCI devices can be single-function or multi-function. In either case,
when this text talks about enabling or disabling MSI on a "device
function," it is referring to one specific PCI device and function and
not to all functions on a PCI device (unless the PCI device has only
one function).
2. What are MSIs?
2. Copyright 2003 Intel Corporation
A Message Signaled Interrupt is a write from the device to a special
address which causes an interrupt to be received by the CPU.
3. What is MSI/MSI-X?
The MSI capability was first specified in PCI 2.2 and was later enhanced
in PCI 3.0 to allow each interrupt to be masked individually. The MSI-X
capability was also introduced with PCI 3.0. It supports more interrupts
per device than MSI and allows interrupts to be independently configured.
Message Signaled Interrupt (MSI), as described in the PCI Local Bus
Specification Revision 2.3 or later, is an optional feature, and a
required feature for PCI Express devices. MSI enables a device function
to request service by sending an Inbound Memory Write on its PCI bus to
the FSB as a Message Signal Interrupt transaction. Because MSI is
generated in the form of a Memory Write, all transaction conditions,
such as a Retry, Master-Abort, Target-Abort or normal completion, are
supported.
Devices may support both MSI and MSI-X, but only one can be enabled at
a time.
A PCI device that supports MSI must also support pin IRQ assertion
interrupt mechanism to provide backward compatibility for systems that
do not support MSI. In systems which support MSI, the bus driver is
responsible for initializing the message address and message data of
the device function's MSI/MSI-X capability structure during device
initial configuration.
An MSI capable device function indicates MSI support by implementing
the MSI/MSI-X capability structure in its PCI capability list. The
device function may implement both the MSI capability structure and
the MSI-X capability structure; however, the bus driver should not
enable both.
3. Why use MSIs?
The MSI capability structure contains Message Control register,
Message Address register and Message Data register. These registers
provide the bus driver control over MSI. The Message Control register
indicates the MSI capability supported by the device. The Message
Address register specifies the target address and the Message Data
register specifies the characteristics of the message. To request
service, the device function writes the content of the Message Data
register to the target address. The device and its software driver
are prohibited from writing to these registers.
There are three reasons why using MSIs can give an advantage over
traditional pin-based interrupts.
The MSI-X capability structure is an optional extension to MSI. It
uses an independent and separate capability structure. There are
some key advantages to implementing the MSI-X capability structure
over the MSI capability structure as described below.
Pin-based PCI interrupts are often shared amongst several devices.
To support this, the kernel must call each interrupt handler associated
with an interrupt, which leads to reduced performance for the system as
a whole. MSIs are never shared, so this problem cannot arise.
- Support a larger maximum number of vectors per function.
When a device writes data to memory, then raises a pin-based interrupt,
it is possible that the interrupt may arrive before all the data has
arrived in memory (this becomes more likely with devices behind PCI-PCI
bridges). In order to ensure that all the data has arrived in memory,
the interrupt handler must read a register on the device which raised
the interrupt. PCI transaction ordering rules require that all the data
arrives in memory before the value can be returned from the register.
Using MSIs avoids this problem as the interrupt-generating write cannot
pass the data writes, so by the time the interrupt is raised, the driver
knows that all the data has arrived in memory.
- Provide the ability for system software to configure
each vector with an independent message address and message
data, specified by a table that resides in Memory Space.
PCI devices can only support a single pin-based interrupt per function.
Often drivers have to query the device to find out what event has
occurred, slowing down interrupt handling for the common case. With
MSIs, a device can support more interrupts, allowing each interrupt
to be specialised to a different purpose. One possible design gives
infrequent conditions (such as errors) their own interrupt which allows
the driver to handle the normal interrupt handling path more efficiently.
Other possible designs include giving one interrupt to each packet queue
in a network card or each port in a storage controller.
- MSI and MSI-X both support per-vector masking. Per-vector
masking is an optional extension of MSI but a required
feature for MSI-X. Per-vector masking provides the kernel the
ability to mask/unmask a single MSI while running its
interrupt service routine. If per-vector masking is
not supported, then the device driver should provide the
hardware/software synchronization to ensure that the device
generates MSI when the driver wants it to do so.
4. Why use MSI?
4. How to use MSIs
As a benefit to the simplification of board design, MSI allows board
designers to remove out-of-band interrupt routing. MSI is another
step towards a legacy-free environment.
PCI devices are initialised to use pin-based interrupts. The device
driver has to set up the device to use MSI or MSI-X. Not all machines
support MSIs correctly, and for those machines, the APIs described below
will simply fail and the device will continue to use pin-based interrupts.
Due to increasing pressure on chipset and processor packages to
reduce pin count, the need for interrupt pins is expected to
diminish over time. Devices, due to pin constraints, may implement
messages to increase performance.
4.1 Include kernel support for MSIs
PCI Express endpoints uses INTx emulation (in-band messages) instead
of IRQ pin assertion. Using INTx emulation requires interrupt
sharing among devices connected to the same node (PCI bridge) while
MSI is unique (non-shared) and does not require BIOS configuration
support. As a result, the PCI Express technology requires MSI
support for better interrupt performance.
To support MSI or MSI-X, the kernel must be built with the CONFIG_PCI_MSI
option enabled. This option is only available on some architectures,
and it may depend on some other options also being set. For example,
on x86, you must also enable X86_UP_APIC or SMP in order to see the
CONFIG_PCI_MSI option.
Using MSI enables the device functions to support two or more
vectors, which can be configured to target different CPUs to
increase scalability.
4.2 Using MSI
5. Configuring a driver to use MSI/MSI-X
Most of the hard work is done for the driver in the PCI layer. It simply
has to request that the PCI layer set up the MSI capability for this
device.
By default, the kernel will not enable MSI/MSI-X on all devices that
support this capability. The CONFIG_PCI_MSI kernel option
must be selected to enable MSI/MSI-X support.
5.1 Including MSI/MSI-X support into the kernel
To allow MSI/MSI-X capable device drivers to selectively enable
MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described
below), the VECTOR based scheme needs to be enabled by setting
CONFIG_PCI_MSI during kernel config.
Since the target of the inbound message is the local APIC, providing
CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI.
5.2 Configuring for MSI support
Due to the non-contiguous fashion in vector assignment of the
existing Linux kernel, this version does not support multiple
messages regardless of a device function is capable of supporting
more than one vector. To enable MSI on a device function's MSI
capability structure requires a device driver to call the function
pci_enable_msi() explicitly.
5.2.1 API pci_enable_msi
4.2.1 pci_enable_msi
int pci_enable_msi(struct pci_dev *dev)
With this new API, a device driver that wants to have MSI
enabled on its device function must call this API to enable MSI.
A successful call will initialize the MSI capability structure
with ONE vector, regardless of whether a device function is
capable of supporting multiple messages. This vector replaces the
pre-assigned dev->irq with a new MSI vector. To avoid a conflict
of the new assigned vector with existing pre-assigned vector requires
a device driver to call this API before calling request_irq().
A successful call will allocate ONE interrupt to the device, regardless
of how many MSIs the device supports. The device will be switched from
pin-based interrupt mode to MSI mode. The dev->irq number is changed
to a new number which represents the message signaled interrupt.
This function should be called before the driver calls request_irq()
since enabling MSIs disables the pin-based IRQ and the driver will not
receive interrupts on the old interrupt.
5.2.2 API pci_disable_msi
4.2.2 pci_enable_msi_block
int pci_enable_msi_block(struct pci_dev *dev, int count)
This variation on the above call allows a device driver to request multiple
MSIs. The MSI specification only allows interrupts to be allocated in
powers of two, up to a maximum of 2^5 (32).
If this function returns 0, it has succeeded in allocating at least as many
interrupts as the driver requested (it may have allocated more in order
to satisfy the power-of-two requirement). In this case, the function
enables MSI on this device and updates dev->irq to be the lowest of
the new interrupts assigned to it. The other interrupts assigned to
the device are in the range dev->irq to dev->irq + count - 1.
If this function returns a negative number, it indicates an error and
the driver should not attempt to request any more MSI interrupts for
this device. If this function returns a positive number, it will be
less than 'count' and indicate the number of interrupts that could have
been allocated. In neither case will the irq value have been
updated, nor will the device have been switched into MSI mode.
The device driver must decide what action to take if
pci_enable_msi_block() returns a value less than the number asked for.
Some devices can make use of fewer interrupts than the maximum they
request; in this case the driver should call pci_enable_msi_block()
again. Note that it is not guaranteed to succeed, even when the
'count' has been reduced to the value returned from a previous call to
pci_enable_msi_block(). This is because there are multiple constraints
on the number of vectors that can be allocated; pci_enable_msi_block()
will return as soon as it finds any constraint that doesn't allow the
call to succeed.
4.2.3 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
This API should always be used to undo the effect of pci_enable_msi()
when a device driver is unloading. This API restores dev->irq with
the pre-assigned IOAPIC vector and switches a device's interrupt
mode to PCI pin-irq assertion/INTx emulation mode.
This function should be used to undo the effect of pci_enable_msi() or
pci_enable_msi_block(). Calling it restores dev->irq to the pin-based
interrupt number and frees the previously allocated message signaled
interrupt(s). The interrupt may subsequently be assigned to another
device, so drivers should not cache the value of dev->irq.
Note that a device driver should always call free_irq() on the MSI vector
that it has done request_irq() on before calling this API. Failure to do
so results in a BUG_ON() and a device will be left with MSI enabled and
leaks its vector.
A device driver must always call free_irq() on the interrupt(s)
for which it has called request_irq() before calling this function.
Failure to do so will result in a BUG_ON(), the device will be left with
MSI enabled and will leak its vector.
5.2.3 MSI mode vs. legacy mode diagram
4.3 Using MSI-X
The below diagram shows the events which switch the interrupt
mode on the MSI-capable device function between MSI mode and
PIN-IRQ assertion mode.
------------ pci_enable_msi ------------------------
| | <=============== | |
| MSI MODE | | PIN-IRQ ASSERTION MODE |
| | ===============> | |
------------ pci_disable_msi ------------------------
Figure 1. MSI Mode vs. Legacy Mode
In Figure 1, a device operates by default in legacy mode. Legacy
in this context means PCI pin-irq assertion or PCI-Express INTx
emulation. A successful MSI request (using pci_enable_msi()) switches
a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector
stored in dev->irq will be saved by the PCI subsystem and a new
assigned MSI vector will replace dev->irq.
To return back to its default mode, a device driver should always call
pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a
device driver should always call free_irq() on the MSI vector it has
done request_irq() on before calling pci_disable_msi(). Failure to do
so results in a BUG_ON() and a device will be left with MSI enabled and
leaks its vector. Otherwise, the PCI subsystem restores a device's
dev->irq with a pre-assigned IOAPIC vector and marks the released
MSI vector as unused.
Once being marked as unused, there is no guarantee that the PCI
subsystem will reserve this MSI vector for a device. Depending on
the availability of current PCI vector resources and the number of
MSI/MSI-X requests from other drivers, this MSI may be re-assigned.
For the case where the PCI subsystem re-assigns this MSI vector to
another driver, a request to switch back to MSI mode may result
in being assigned a different MSI vector or a failure if no more
vectors are available.
5.3 Configuring for MSI-X support
Due to the ability of the system software to configure each vector of
the MSI-X capability structure with an independent message address
and message data, the non-contiguous fashion in vector assignment of
the existing Linux kernel has no impact on supporting multiple
messages on an MSI-X capable device functions. To enable MSI-X on
a device function's MSI-X capability structure requires its device
driver to call the function pci_enable_msix() explicitly.
The function pci_enable_msix(), once invoked, enables either
all or nothing, depending on the current availability of PCI vector
resources. If the PCI vector resources are available for the number
of vectors requested by a device driver, this function will configure
the MSI-X table of the MSI-X capability structure of a device with
requested messages. To emphasize this reason, for example, a device
may be capable for supporting the maximum of 32 vectors while its
software driver usually may request 4 vectors. It is recommended
that the device driver should call this function once during the
initialization phase of the device driver.
Unlike the function pci_enable_msi(), the function pci_enable_msix()
does not replace the pre-assigned IOAPIC dev->irq with a new MSI
vector because the PCI subsystem writes the 1:1 vector-to-entry mapping
into the field vector of each element contained in a second argument.
Note that the pre-assigned IOAPIC dev->irq is valid only if the device
operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at
using dev->irq by the device driver to request for interrupt service
may result in unpredictable behavior.
For each MSI-X vector granted, a device driver is responsible for calling
other functions like request_irq(), enable_irq(), etc. to enable
this vector with its corresponding interrupt service handler. It is
a device driver's choice to assign all vectors with the same
interrupt service handler or each vector with a unique interrupt
service handler.
5.3.1 Handling MMIO address space of MSI-X Table
The PCI 3.0 specification has implementation notes that MMIO address
space for a device's MSI-X structure should be isolated so that the
software system can set different pages for controlling accesses to the
MSI-X structure. The implementation of MSI support requires the PCI
subsystem, not a device driver, to maintain full control of the MSI-X
table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X
table/MSI-X PBA. A device driver should not access the MMIO address
space of the MSI-X table/MSI-X PBA.
5.3.2 API pci_enable_msix
int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
This API enables a device driver to request the PCI subsystem
to enable MSI-X messages on its hardware device. Depending on
the availability of PCI vectors resources, the PCI subsystem enables
either all or none of the requested vectors.
Argument 'dev' points to the device (pci_dev) structure.
Argument 'entries' is a pointer to an array of msix_entry structs.
The number of entries is indicated in argument 'nvec'.
struct msix_entry is defined in /driver/pci/msi.h:
The MSI-X capability is much more flexible than the MSI capability.
It supports up to 2048 interrupts, each of which can be controlled
independently. To support this flexibility, drivers must use an array of
`struct msix_entry':
struct msix_entry {
u16 vector; /* kernel uses to write alloc vector */
u16 entry; /* driver uses to specify entry */
};
A device driver is responsible for initializing the field 'entry' of
each element with a unique entry supported by MSI-X table. Otherwise,
-EINVAL will be returned as a result. A successful return of zero
indicates the PCI subsystem completed initializing each of the requested
entries of the MSI-X table with message address and message data.
Last but not least, the PCI subsystem will write the 1:1
vector-to-entry mapping into the field 'vector' of each element. A
device driver is responsible for keeping track of allocated MSI-X
vectors in its internal data structure.
This allows for the device to use these interrupts in a sparse fashion;
for example it could use interrupts 3 and 1027 and allocate only a
two-element array. The driver is expected to fill in the 'entry' value
in each element of the array to indicate which entries it wants the kernel
to assign interrupts for. It is invalid to fill in two entries with the
same number.
A return of zero indicates that the number of MSI-X vectors was
successfully allocated. A return of greater than zero indicates
MSI-X vector shortage. Or a return of less than zero indicates
a failure. This failure may be a result of duplicate entries
specified in second argument, or a result of no available vector,
or a result of failing to initialize MSI-X table entries.
4.3.1 pci_enable_msix
5.3.3 API pci_disable_msix
int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
Calling this function asks the PCI subsystem to allocate 'nvec' MSIs.
The 'entries' argument is a pointer to an array of msix_entry structs
which should be at least 'nvec' entries in size. On success, the
function will return 0 and the device will have been switched into
MSI-X interrupt mode. The 'vector' elements in each entry will have
been filled in with the interrupt number. The driver should then call
request_irq() for each 'vector' that it decides to use.
If this function returns a negative number, it indicates an error and
the driver should not attempt to allocate any more MSI-X interrupts for
this device. If it returns a positive number, it indicates the maximum
number of interrupt vectors that could have been allocated. See example
below.
This function, in contrast with pci_enable_msi(), does not adjust
dev->irq. The device will not generate interrupts for this interrupt
number once MSI-X is enabled. The device driver is responsible for
keeping track of the interrupts assigned to the MSI-X vectors so it can
free them again later.
Device drivers should normally call this function once per device
during the initialization phase.
It is ideal if drivers can cope with a variable number of MSI-X interrupts,
there are many reasons why the platform may not be able to provide the
exact number a driver asks for.
A request loop to achieve that might look like:
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
rc = pci_enable_msix(adapter->pdev,
adapter->msix_entries, nvec);
if (rc > 0)
nvec = rc;
else
return rc;
}
return -ENOSPC;
}
4.3.2 pci_disable_msix
void pci_disable_msix(struct pci_dev *dev)
This API should always be used to undo the effect of pci_enable_msix()
when a device driver is unloading. Note that a device driver should
always call free_irq() on all MSI-X vectors it has done request_irq()
on before calling this API. Failure to do so results in a BUG_ON() and
a device will be left with MSI-X enabled and leaks its vectors.
This API should be used to undo the effect of pci_enable_msix(). It frees
the previously allocated message signaled interrupts. The interrupts may
subsequently be assigned to another device, so drivers should not cache
the value of the 'vector' elements over a call to pci_disable_msix().
5.3.4 MSI-X mode vs. legacy mode diagram
A device driver must always call free_irq() on the interrupt(s)
for which it has called request_irq() before calling this function.
Failure to do so will result in a BUG_ON(), the device will be left with
MSI enabled and will leak its vector.
The below diagram shows the events which switch the interrupt
mode on the MSI-X capable device function between MSI-X mode and
PIN-IRQ assertion mode (legacy).
4.3.3 The MSI-X Table
------------ pci_enable_msix(,,n) ------------------------
| | <=============== | |
| MSI-X MODE | | PIN-IRQ ASSERTION MODE |
| | ===============> | |
------------ pci_disable_msix ------------------------
The MSI-X capability specifies a BAR and offset within that BAR for the
MSI-X Table. This address is mapped by the PCI subsystem, and should not
be accessed directly by the device driver. If the driver wishes to
mask or unmask an interrupt, it should call disable_irq() / enable_irq().
Figure 2. MSI-X Mode vs. Legacy Mode
4.4 Handling devices implementing both MSI and MSI-X capabilities
In Figure 2, a device operates by default in legacy mode. A
successful MSI-X request (using pci_enable_msix()) switches a
device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector
stored in dev->irq will be saved by the PCI subsystem; however,
unlike MSI mode, the PCI subsystem will not replace dev->irq with
assigned MSI-X vector because the PCI subsystem already writes the 1:1
vector-to-entry mapping into the field 'vector' of each element
specified in second argument.
If a device implements both MSI and MSI-X capabilities, it can
run in either MSI mode or MSI-X mode but not both simultaneously.
This is a requirement of the PCI spec, and it is enforced by the
PCI layer. Calling pci_enable_msi() when MSI-X is already enabled or
pci_enable_msix() when MSI is already enabled will result in an error.
If a device driver wishes to switch between MSI and MSI-X at runtime,
it must first quiesce the device, then switch it back to pin-interrupt
mode, before calling pci_enable_msi() or pci_enable_msix() and resuming
operation. This is not expected to be a common operation but may be
useful for debugging or testing during development.
To return back to its default mode, a device driver should always call
pci_disable_msix() to undo the effect of pci_enable_msix(). Note that
a device driver should always call free_irq() on all MSI-X vectors it
has done request_irq() on before calling pci_disable_msix(). Failure
to do so results in a BUG_ON() and a device will be left with MSI-X
enabled and leaks its vectors. Otherwise, the PCI subsystem switches a
device function's interrupt mode from MSI-X mode to legacy mode and
marks all allocated MSI-X vectors as unused.
4.5 Considerations when using MSIs
Once being marked as unused, there is no guarantee that the PCI
subsystem will reserve these MSI-X vectors for a device. Depending on
the availability of current PCI vector resources and the number of
MSI/MSI-X requests from other drivers, these MSI-X vectors may be
re-assigned.
4.5.1 Choosing between MSI-X and MSI
For the case where the PCI subsystem re-assigned these MSI-X vectors
to other drivers, a request to switch back to MSI-X mode may result
being assigned with another set of MSI-X vectors or a failure if no
more vectors are available.
If your device supports both MSI-X and MSI capabilities, you should use
the MSI-X facilities in preference to the MSI facilities. As mentioned
above, MSI-X supports any number of interrupts between 1 and 2048.
In constrast, MSI is restricted to a maximum of 32 interrupts (and
must be a power of two). In addition, the MSI interrupt vectors must
be allocated consecutively, so the system may not be able to allocate
as many vectors for MSI as it could for MSI-X. On some platforms, MSI
interrupts must all be targetted at the same set of CPUs whereas MSI-X
interrupts can all be targetted at different CPUs.
5.4 Handling function implementing both MSI and MSI-X capabilities
4.5.2 Spinlocks
For the case where a function implements both MSI and MSI-X
capabilities, the PCI subsystem enables a device to run either in MSI
mode or MSI-X mode but not both. A device driver determines whether it
wants MSI or MSI-X enabled on its hardware device. Once a device
driver requests for MSI, for example, it is prohibited from requesting
MSI-X; in other words, a device driver is not permitted to ping-pong
between MSI mod MSI-X mode during a run-time.
Most device drivers have a per-device spinlock which is taken in the
interrupt handler. With pin-based interrupts or a single MSI, it is not
necessary to disable interrupts (Linux guarantees the same interrupt will
not be re-entered). If a device uses multiple interrupts, the driver
must disable interrupts while the lock is held. If the device sends
a different interrupt, the driver will deadlock trying to recursively
acquire the spinlock.
5.5 Hardware requirements for MSI/MSI-X support
There are two solutions. The first is to take the lock with
spin_lock_irqsave() or spin_lock_irq() (see
Documentation/DocBook/kernel-locking). The second is to specify
IRQF_DISABLED to request_irq() so that the kernel runs the entire
interrupt routine with interrupts disabled.
MSI/MSI-X support requires support from both system hardware and
individual hardware device functions.
If your MSI interrupt routine does not hold the lock for the whole time
it is running, the first solution may be best. The second solution is
normally preferred as it avoids making two transitions from interrupt
disabled to enabled and back again.
5.5.1 Required x86 hardware support
4.6 How to tell whether MSI/MSI-X is enabled on a device
Since the target of MSI address is the local APIC CPU, enabling
MSI/MSI-X support in the Linux kernel is dependent on whether existing
system hardware supports local APIC. Users should verify that their
system supports local APIC operation by testing that it runs when
CONFIG_X86_LOCAL_APIC=y.
Using 'lspci -v' (as root) may show some devices with "MSI", "Message
Signalled Interrupts" or "MSI-X" capabilities. Each of these capabilities
has an 'Enable' flag which will be followed with either "+" (enabled)
or "-" (disabled).
In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set;
however, in UP environment, users must manually set
CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting
CONFIG_PCI_MSI enables the VECTOR based scheme and the option for
MSI-capable device drivers to selectively enable MSI/MSI-X.
Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X
vector is allocated new during runtime and MSI/MSI-X support does not
depend on BIOS support. This key independency enables MSI/MSI-X
support on future IOxAPIC free platforms.
5. MSI quirks
5.5.2 Device hardware support
Several PCI chipsets or devices are known not to support MSIs.
The PCI stack provides three ways to disable MSIs:
The hardware device function supports MSI by indicating the
MSI/MSI-X capability structure on its PCI capability list. By
default, this capability structure will not be initialized by
the kernel to enable MSI during the system boot. In other words,
the device function is running on its default pin assertion mode.
Note that in many cases the hardware supporting MSI have bugs,
which may result in system hangs. The software driver of specific
MSI-capable hardware is responsible for deciding whether to call
pci_enable_msi or not. A return of zero indicates the kernel
successfully initialized the MSI/MSI-X capability structure of the
device function. The device function is now running on MSI/MSI-X mode.
1. globally
2. on all devices behind a specific bridge
3. on a single device
5.6 How to tell whether MSI/MSI-X is enabled on device function
5.1. Disabling MSIs globally
At the driver level, a return of zero from the function call of
pci_enable_msi()/pci_enable_msix() indicates to a device driver that
its device function is initialized successfully and ready to run in
MSI/MSI-X mode.
Some host chipsets simply don't support MSIs properly. If we're
lucky, the manufacturer knows this and has indicated it in the ACPI
FADT table. In this case, Linux will automatically disable MSIs.
Some boards don't include this information in the table and so we have
to detect them ourselves. The complete list of these is found near the
quirk_disable_all_msi() function in drivers/pci/quirks.c.
At the user level, users can use the command 'cat /proc/interrupts'
to display the vectors allocated for devices and their interrupt
MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is
enabled on a SCSI Adaptec 39320D Ultra320 controller.
If you have a board which has problems with MSIs, you can pass pci=nomsi
on the kernel command line to disable MSIs on all devices. It would be
in your best interests to report the problem to linux-pci@vger.kernel.org
including a full 'lspci -v' so we can add the quirks to the kernel.
CPU0 CPU1
0: 324639 0 IO-APIC-edge timer
1: 1186 0 IO-APIC-edge i8042
2: 0 0 XT-PIC cascade
12: 2797 0 IO-APIC-edge i8042
14: 6543 0 IO-APIC-edge ide0
15: 1 0 IO-APIC-edge ide1
169: 0 0 IO-APIC-level uhci-hcd
185: 0 0 IO-APIC-level uhci-hcd
193: 138 10 PCI-MSI aic79xx
201: 30 0 PCI-MSI aic79xx
225: 30 0 IO-APIC-level aic7xxx
233: 30 0 IO-APIC-level aic7xxx
NMI: 0 0
LOC: 324553 325068
ERR: 0
MIS: 0
5.2. Disabling MSIs below a bridge
6. MSI quirks
Some PCI bridges are not able to route MSIs between busses properly.
In this case, MSIs must be disabled on all devices behind the bridge.
Several PCI chipsets or devices are known to not support MSI.
The PCI stack provides 3 possible levels of MSI disabling:
* on a single device
* on all devices behind a specific bridge
* globally
Some bridges allow you to enable MSIs by changing some bits in their
PCI configuration space (especially the Hypertransport chipsets such
as the nVidia nForce and Serverworks HT2000). As with host chipsets,
Linux mostly knows about them and automatically enables MSIs if it can.
If you have a bridge which Linux doesn't yet know about, you can enable
MSIs in configuration space using whatever method you know works, then
enable MSIs on that bridge by doing:
6.1. Disabling MSI on a single device
echo 1 > /sys/bus/pci/devices/$bridge/msi_bus
Under some circumstances it might be required to disable MSI on a
single device. This may be achieved by either not calling pci_enable_msi()
or all, or setting the pci_dev->no_msi flag before (most of the time
in a quirk).
where $bridge is the PCI address of the bridge you've enabled (eg
0000:00:0e.0).
6.2. Disabling MSI below a bridge
To disable MSIs, echo 0 instead of 1. Changing this value should be
done with caution as it can break interrupt handling for all devices
below this bridge.
The vast majority of MSI quirks are required by PCI bridges not
being able to route MSI between busses. In this case, MSI have to be
disabled on all devices behind this bridge. It is achieves by setting
the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge
subordinate bus. There is no need to set the same flag on bridges that
are below the broken bridge. When pci_enable_msi() is called to enable
MSI on a device, pci_msi_supported() takes care of checking the NO_MSI
flag in all parent busses of the device.
Again, please notify linux-pci@vger.kernel.org of any bridges that need
special handling.
Some bridges actually support dynamic MSI support enabling/disabling
by changing some bits in their PCI configuration space (especially
the Hypertransport chipsets such as the nVidia nForce and Serverworks
HT2000). It may then be required to update the NO_MSI flag on the
corresponding devices in the sysfs hierarchy. To enable MSI support
on device "0000:00:0e", do:
5.3. Disabling MSIs on a single device
echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus
Some devices are known to have faulty MSI implementations. Usually this
is handled in the individual device driver but occasionally it's necessary
to handle this with a quirk. Some drivers have an option to disable use
of MSI. While this is a convenient workaround for the driver author,
it is not good practise, and should not be emulated.
To disable MSI support, echo 0 instead of 1. Note that it should be
used with caution since changing this value might break interrupts.
5.4. Finding why MSIs are disabled on a device
6.3. Disabling MSI globally
From the above three sections, you can see that there are many reasons
why MSIs may not be enabled for a given device. Your first step should
be to examine your dmesg carefully to determine whether MSIs are enabled
for your machine. You should also check your .config to be sure you
have enabled CONFIG_PCI_MSI.
Some extreme cases may require to disable MSI globally on the system.
For now, the only known case is a Serverworks PCI-X chipsets (MSI are
not supported on several busses that are not all connected to the
chipset in the Linux PCI hierarchy). In the vast majority of other
cases, disabling only behind a specific bridge is enough.
Then, 'lspci -t' gives the list of bridges above a device. Reading
/sys/bus/pci/devices/*/msi_bus will tell you whether MSI are enabled (1)
or disabled (0). If 0 is found in any of the msi_bus files belonging
to bridges between the PCI root and the device, MSIs are disabled.
For debugging purpose, the user may also pass pci=nomsi on the kernel
command-line to explicitly disable MSI globally. But, once the appro-
priate quirks are added to the kernel, this option should not be
required anymore.
6.4. Finding why MSI cannot be enabled on a device
Assuming that MSI are not enabled on a device, you should look at
dmesg to find messages that quirks may output when disabling MSI
on some devices, some bridges or even globally.
Then, lspci -t gives the list of bridges above a device. Reading
/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI
are enabled (1) or disabled (0). In 0 is found in a single bridge
msi_bus file above the device, MSI cannot be enabled.
7. FAQ
Q1. Are there any limitations on using the MSI?
A1. If the PCI device supports MSI and conforms to the
specification and the platform supports the APIC local bus,
then using MSI should work.
Q2. Will it work on all the Pentium processors (P3, P4, Xeon,
AMD processors)? In P3 IPI's are transmitted on the APIC local
bus and in P4 and Xeon they are transmitted on the system
bus. Are there any implications with this?
A2. MSI support enables a PCI device sending an inbound
memory write (0xfeexxxxx as target address) on its PCI bus
directly to the FSB. Since the message address has a
redirection hint bit cleared, it should work.
Q3. The target address 0xfeexxxxx will be translated by the
Host Bridge into an interrupt message. Are there any
limitations on the chipsets such as Intel 8xx, Intel e7xxx,
or VIA?
A3. If these chipsets support an inbound memory write with
target address set as 0xfeexxxxx, as conformed to PCI
specification 2.3 or latest, then it should work.
Q4. From the driver point of view, if the MSI is lost because
of errors occurring during inbound memory write, then it may
wait forever. Is there a mechanism for it to recover?
A4. Since the target of the transaction is an inbound memory
write, all transaction termination conditions (Retry,
Master-Abort, Target-Abort, or normal completion) are
supported. A device sending an MSI must abide by all the PCI
rules and conditions regarding that inbound memory write. So,
if a retry is signaled it must retry, etc... We believe that
the recommendation for Abort is also a retry (refer to PCI
specification 2.3 or latest).
It is also worth checking the device driver to see whether it supports MSIs.
For example, it may contain calls to pci_enable_msi(), pci_enable_msix() or
pci_enable_msi_block().

View File

@ -0,0 +1,99 @@
PCI Express I/O Virtualization Howto
Copyright (C) 2009 Intel Corporation
Yu Zhao <yu.zhao@intel.com>
1. Overview
1.1 What is SR-IOV
Single Root I/O Virtualization (SR-IOV) is a PCI Express Extended
capability which makes one physical device appear as multiple virtual
devices. The physical device is referred to as Physical Function (PF)
while the virtual devices are referred to as Virtual Functions (VF).
Allocation of the VF can be dynamically controlled by the PF via
registers encapsulated in the capability. By default, this feature is
not enabled and the PF behaves as traditional PCIe device. Once it's
turned on, each VF's PCI configuration space can be accessed by its own
Bus, Device and Function Number (Routing ID). And each VF also has PCI
Memory Space, which is used to map its register set. VF device driver
operates on the register set so it can be functional and appear as a
real existing PCI device.
2. User Guide
2.1 How can I enable SR-IOV capability
The device driver (PF driver) will control the enabling and disabling
of the capability via API provided by SR-IOV core. If the hardware
has SR-IOV capability, loading its PF driver would enable it and all
VFs associated with the PF.
2.2 How can I use the Virtual Functions
The VF is treated as hot-plugged PCI devices in the kernel, so they
should be able to work in the same way as real PCI devices. The VF
requires device driver that is same as a normal PCI device's.
3. Developer Guide
3.1 SR-IOV API
To enable SR-IOV capability:
int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
'nr_virtfn' is number of VFs to be enabled.
To disable SR-IOV capability:
void pci_disable_sriov(struct pci_dev *dev);
To notify SR-IOV core of Virtual Function Migration:
irqreturn_t pci_sriov_migration(struct pci_dev *dev);
3.2 Usage example
Following piece of code illustrates the usage of the SR-IOV API.
static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
pci_enable_sriov(dev, NR_VIRTFN);
...
return 0;
}
static void __devexit dev_remove(struct pci_dev *dev)
{
pci_disable_sriov(dev);
...
}
static int dev_suspend(struct pci_dev *dev, pm_message_t state)
{
...
return 0;
}
static int dev_resume(struct pci_dev *dev)
{
...
return 0;
}
static void dev_shutdown(struct pci_dev *dev)
{
...
}
static struct pci_driver dev_driver = {
.name = "SR-IOV Physical Function driver",
.id_table = dev_id_table,
.probe = dev_probe,
.remove = __devexit_p(dev_remove),
.suspend = dev_suspend,
.resume = dev_resume,
.shutdown = dev_shutdown,
};

View File

@ -25,7 +25,7 @@ use IO::Handle;
"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1");
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
# Check args
syntax() if (scalar(@ARGV) != 1);
@ -37,8 +37,8 @@ for ($i=0; $i < scalar(@components); $i++) {
$outfile = eval($cid);
die $@ if $@;
print STDERR <<EOF;
Firmware $outfile extracted successfully.
Now copy it to either /usr/lib/hotplug/firmware or /lib/firmware
Firmware(s) $outfile extracted successfully.
Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
(depending on configuration of firmware hotplug).
EOF
exit(0);
@ -345,6 +345,85 @@ sub or51211 {
$fwfile;
}
sub cx231xx {
my $fwfile = "v4l-cx231xx-avcore-01.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
my $hash = "7d3bb956dc9df0eafded2b56ba57cc42";
checkstandard();
wgetfile($fwfile, $url);
verify($fwfile, $hash);
$fwfile;
}
sub cx18 {
my $url = "http://linuxtv.org/downloads/firmware/";
my %files = (
'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a',
'v4l-cx23418-cpu.fw' => 'b6c7ed64bc44b1a6e0840adaeac39d79',
'v4l-cx23418-dig.fw' => '95bc688d3e7599fd5800161e9971cc55',
);
checkstandard();
my $allfiles;
foreach my $fwfile (keys %files) {
wgetfile($fwfile, "$url/$fwfile");
verify($fwfile, $files{$fwfile});
$allfiles .= " $fwfile";
}
$allfiles =~ s/^\s//;
$allfiles;
}
sub cx23885 {
my $url = "http://linuxtv.org/downloads/firmware/";
my %files = (
'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
'v4l-cx23885-enc.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
);
checkstandard();
my $allfiles;
foreach my $fwfile (keys %files) {
wgetfile($fwfile, "$url/$fwfile");
verify($fwfile, $files{$fwfile});
$allfiles .= " $fwfile";
}
$allfiles =~ s/^\s//;
$allfiles;
}
sub pvrusb2 {
my $url = "http://linuxtv.org/downloads/firmware/";
my %files = (
'v4l-cx25840.fw' => 'dadb79e9904fc8af96e8111d9cb59320',
);
checkstandard();
my $allfiles;
foreach my $fwfile (keys %files) {
wgetfile($fwfile, "$url/$fwfile");
verify($fwfile, $files{$fwfile});
$allfiles .= " $fwfile";
}
$allfiles =~ s/^\s//;
$allfiles;
}
sub or51132_qam {
my $fwfile = "dvb-fe-or51132-qam.fw";
my $url = "http://linuxtv.org/downloads/firmware/$fwfile";

View File

@ -11,8 +11,6 @@ aty128fb.txt
- info on the ATI Rage128 frame buffer driver.
cirrusfb.txt
- info on the driver for Cirrus Logic chipsets.
cyblafb/
- directory with documentation files related to the cyblafb driver.
deferred_io.txt
- an introduction to deferred IO.
fbcon.txt

View File

@ -1,13 +0,0 @@
Bugs
====
I currently don't know of any bug. Please do send reports to:
- linux-fbdev-devel@lists.sourceforge.net
- Knut_Petersen@t-online.de.
Untested features
=================
All LCD stuff is untested. If it worked in tridentfb, it should work in
cyblafb. Please test and report the results to Knut_Petersen@t-online.de.

View File

@ -1,7 +0,0 @@
Thanks to
=========
* Alan Hourihane, for writing the X trident driver
* Jani Monoses, for writing the tridentfb driver
* Antonino A. Daplas, for review of the first published
version of cyblafb and some code
* Jochen Hein, for testing and a helpfull bug report

View File

@ -1,17 +0,0 @@
Available Documentation
=======================
Apollo PLE 133 Chipset VT8601A North Bridge Datasheet, Rev. 1.82, October 22,
2001, available from VIA:
http://www.viavpsd.com/product/6/15/DS8601A182.pdf
The datasheet is incomplete, some registers that need to be programmed are not
explained at all and important bits are listed as "reserved". But you really
need the datasheet to understand the code. "p. xxx" comments refer to page
numbers of this document.
XFree/XOrg drivers are available and of good quality, looking at the code
there is a good idea if the datasheet does not provide enough information
or if the datasheet seems to be wrong.

View File

@ -1,154 +0,0 @@
#
# Sample fb.modes file
#
# Provides an incomplete list of working modes for
# the cyberblade/i1 graphics core.
#
# The value 4294967256 is used instead of -40. Of course, -40 is not
# a really reasonable value, but chip design does not always follow
# logic. Believe me, it's ok, and it's the way the BIOS does it.
#
# fbset requires 4294967256 in fb.modes and -40 as an argument to
# the -t parameter. That's also not too reasonable, and it might change
# in the future or might even be differt for your current version.
#
mode "640x480-50"
geometry 640 480 2048 4096 8
timings 47619 4294967256 24 17 0 216 3
endmode
mode "640x480-60"
geometry 640 480 2048 4096 8
timings 39682 4294967256 24 17 0 216 3
endmode
mode "640x480-70"
geometry 640 480 2048 4096 8
timings 34013 4294967256 24 17 0 216 3
endmode
mode "640x480-72"
geometry 640 480 2048 4096 8
timings 33068 4294967256 24 17 0 216 3
endmode
mode "640x480-75"
geometry 640 480 2048 4096 8
timings 31746 4294967256 24 17 0 216 3
endmode
mode "640x480-80"
geometry 640 480 2048 4096 8
timings 29761 4294967256 24 17 0 216 3
endmode
mode "640x480-85"
geometry 640 480 2048 4096 8
timings 28011 4294967256 24 17 0 216 3
endmode
mode "800x600-50"
geometry 800 600 2048 4096 8
timings 30303 96 24 14 0 136 11
endmode
mode "800x600-60"
geometry 800 600 2048 4096 8
timings 25252 96 24 14 0 136 11
endmode
mode "800x600-70"
geometry 800 600 2048 4096 8
timings 21645 96 24 14 0 136 11
endmode
mode "800x600-72"
geometry 800 600 2048 4096 8
timings 21043 96 24 14 0 136 11
endmode
mode "800x600-75"
geometry 800 600 2048 4096 8
timings 20202 96 24 14 0 136 11
endmode
mode "800x600-80"
geometry 800 600 2048 4096 8
timings 18939 96 24 14 0 136 11
endmode
mode "800x600-85"
geometry 800 600 2048 4096 8
timings 17825 96 24 14 0 136 11
endmode
mode "1024x768-50"
geometry 1024 768 2048 4096 8
timings 19054 144 24 29 0 120 3
endmode
mode "1024x768-60"
geometry 1024 768 2048 4096 8
timings 15880 144 24 29 0 120 3
endmode
mode "1024x768-70"
geometry 1024 768 2048 4096 8
timings 13610 144 24 29 0 120 3
endmode
mode "1024x768-72"
geometry 1024 768 2048 4096 8
timings 13232 144 24 29 0 120 3
endmode
mode "1024x768-75"
geometry 1024 768 2048 4096 8
timings 12703 144 24 29 0 120 3
endmode
mode "1024x768-80"
geometry 1024 768 2048 4096 8
timings 11910 144 24 29 0 120 3
endmode
mode "1024x768-85"
geometry 1024 768 2048 4096 8
timings 11209 144 24 29 0 120 3
endmode
mode "1280x1024-50"
geometry 1280 1024 2048 4096 8
timings 11114 232 16 39 0 160 3
endmode
mode "1280x1024-60"
geometry 1280 1024 2048 4096 8
timings 9262 232 16 39 0 160 3
endmode
mode "1280x1024-70"
geometry 1280 1024 2048 4096 8
timings 7939 232 16 39 0 160 3
endmode
mode "1280x1024-72"
geometry 1280 1024 2048 4096 8
timings 7719 232 16 39 0 160 3
endmode
mode "1280x1024-75"
geometry 1280 1024 2048 4096 8
timings 7410 232 16 39 0 160 3
endmode
mode "1280x1024-80"
geometry 1280 1024 2048 4096 8
timings 6946 232 16 39 0 160 3
endmode
mode "1280x1024-85"
geometry 1280 1024 2048 4096 8
timings 6538 232 16 39 0 160 3
endmode

View File

@ -1,79 +0,0 @@
Speed
=====
CyBlaFB is much faster than tridentfb and vesafb. Compare the performance data
for mode 1280x1024-[8,16,32]@61 Hz.
Test 1: Cat a file with 2000 lines of 0 characters.
Test 2: Cat a file with 2000 lines of 80 characters.
Test 3: Cat a file with 2000 lines of 160 characters.
All values show system time use in seconds, kernel 2.6.12 was used for
the measurements. 2.6.13 is a bit slower, 2.6.14 hopefully will include a
patch that speeds up kernel bitblitting a lot ( > 20%).
+-----------+-----------------------------------------------------+
| | not accelerated |
| TRIDENTFB +-----------------+-----------------+-----------------+
| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp |
| | noypan | ypan | noypan | ypan | noypan | ypan |
+-----------+--------+--------+--------+--------+--------+--------+
| Test 1 | 4.31 | 4.33 | 6.05 | 12.81 | ---- | ---- |
| Test 2 | 67.94 | 5.44 | 123.16 | 14.79 | ---- | ---- |
| Test 3 | 131.36 | 6.55 | 240.12 | 16.76 | ---- | ---- |
+-----------+--------+--------+--------+--------+--------+--------+
| Comments | | | completely bro- |
| | | | ken, monitor |
| | | | switches off |
+-----------+-----------------+-----------------+-----------------+
+-----------+-----------------------------------------------------+
| | accelerated |
| TRIDENTFB +-----------------+-----------------+-----------------+
| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp |
| | noypan | ypan | noypan | ypan | noypan | ypan |
+-----------+--------+--------+--------+--------+--------+--------+
| Test 1 | ---- | ---- | 20.62 | 1.22 | ---- | ---- |
| Test 2 | ---- | ---- | 22.61 | 3.19 | ---- | ---- |
| Test 3 | ---- | ---- | 24.59 | 5.16 | ---- | ---- |
+-----------+--------+--------+--------+--------+--------+--------+
| Comments | broken, writing | broken, ok only | completely bro- |
| | to wrong places | if bgcolor is | ken, monitor |
| | on screen + bug | black, bug in | switches off |
| | in fillrect() | fillrect() | |
+-----------+-----------------+-----------------+-----------------+
+-----------+-----------------------------------------------------+
| | not accelerated |
| VESAFB +-----------------+-----------------+-----------------+
| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp |
| | noypan | ypan | noypan | ypan | noypan | ypan |
+-----------+--------+--------+--------+--------+--------+--------+
| Test 1 | 4.26 | 3.76 | 5.99 | 7.23 | ---- | ---- |
| Test 2 | 65.65 | 4.89 | 120.88 | 9.08 | ---- | ---- |
| Test 3 | 126.91 | 5.94 | 235.77 | 11.03 | ---- | ---- |
+-----------+--------+--------+--------+--------+--------+--------+
| Comments | vga=0x307 | vga=0x31a | vga=0x31b not |
| | fh=80kHz | fh=80kHz | supported by |
| | fv=75kHz | fv=75kHz | video BIOS and |
| | | | hardware |
+-----------+-----------------+-----------------+-----------------+
+-----------+-----------------------------------------------------+
| | accelerated |
| CYBLAFB +-----------------+-----------------+-----------------+
| | 8 bpp | 16 bpp | 32 bpp |
| | noypan | ypan | noypan | ypan | noypan | ypan |
+-----------+--------+--------+--------+--------+--------+--------+
| Test 1 | 8.02 | 0.23 | 19.04 | 0.61 | 57.12 | 2.74 |
| Test 2 | 8.38 | 0.55 | 19.39 | 0.92 | 57.54 | 3.13 |
| Test 3 | 8.73 | 0.86 | 19.74 | 1.24 | 57.95 | 3.51 |
+-----------+--------+--------+--------+--------+--------+--------+
| Comments | | | |
| | | | |
| | | | |
| | | | |
+-----------+-----------------+-----------------+-----------------+

View File

@ -1,31 +0,0 @@
TODO / Missing features
=======================
Verify LCD stuff "stretch" and "center" options are
completely untested ... this code needs to be
verified. As I don't have access to such
hardware, please contact me if you are
willing run some tests.
Interlaced video modes The reason that interleaved
modes are disabled is that I do not know
the meaning of the vertical interlace
parameter. Also the datasheet mentions a
bit d8 of a horizontal interlace parameter,
but nowhere the lower 8 bits. Please help
if you can.
low-res double scan modes Who needs it?
accelerated color blitting Who needs it? The console driver does use color
blitting for nothing but drawing the penguine,
everything else is done using color expanding
blitting of 1bpp character bitmaps.
ioctls Who needs it?
TV-out Will be done later. Use "vga= " at boot time
to set a suitable video mode.
??? Feel free to contact me if you have any
feature requests

View File

@ -1,217 +0,0 @@
CyBlaFB is a framebuffer driver for the Cyberblade/i1 graphics core integrated
into the VIA Apollo PLE133 (aka vt8601) south bridge. It is developed and
tested using a VIA EPIA 5000 board.
Cyblafb - compiled into the kernel or as a module?
==================================================
You might compile cyblafb either as a module or compile it permanently into the
kernel.
Unless you have a real reason to do so you should not compile both vesafb and
cyblafb permanently into the kernel. It's possible and it helps during the
developement cycle, but it's useless and will at least block some otherwise
usefull memory for ordinary users.
Selecting Modes
===============
Startup Mode
============
First of all, you might use the "vga=???" boot parameter as it is
documented in vesafb.txt and svga.txt. Cyblafb will detect the video
mode selected and will use the geometry and timings found by
inspecting the hardware registers.
video=cyblafb vga=0x317
Alternatively you might use a combination of the mode, ref and bpp
parameters. If you compiled the driver into the kernel, add something
like this to the kernel command line:
video=cyblafb:1280x1024,bpp=16,ref=50 ...
If you compiled the driver as a module, the same mode would be
selected by the following command:
modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
None of the modes possible to select as startup modes are affected by
the problems described at the end of the next subsection.
For all startup modes cyblafb chooses a virtual x resolution of 2048,
the only exception is mode 1280x1024 in combination with 32 bpp. This
allows ywrap scrolling for all those modes if rotation is 0 or 2, and
also fast scrolling if rotation is 1 or 3. The default virtual y reso-
lution is 4096 for bpp == 8, 2048 for bpp==16 and 1024 for bpp == 32,
again with the only exception of 1280x1024 at 32 bpp.
Please do set your video memory size to 8 Mb in the Bios setup. Other
values will work, but performace is decreased for a lot of modes.
Mode changes using fbset
========================
You might use fbset to change the video mode, see "man fbset". Cyblafb
generally does assume that you know what you are doing. But it does
some checks, especially those that are needed to prevent you from
damaging your hardware.
- only 8, 16, 24 and 32 bpp video modes are accepted
- interlaced video modes are not accepted
- double scan video modes are not accepted
- if a flat panel is found, cyblafb does not allow you
to program a resolution higher than the physical
resolution of the flat panel monitor
- cyblafb does not allow vclk to exceed 230 MHz. As 32 bpp
and (currently) 24 bit modes use a doubled vclk internally,
the dotclock limit as seen by fbset is 115 MHz for those
modes and 230 MHz for 8 and 16 bpp modes.
- cyblafb will allow you to select very high resolutions as
long as the hardware can be programmed to these modes. The
documented limit 1600x1200 is not enforced, but don't expect
perfect signal quality.
Any request that violates the rules given above will be either changed
to something the hardware supports or an error value will be returned.
If you program a virtual y resolution higher than the hardware limit,
cyblafb will silently decrease that value to the highest possible
value. The same is true for a virtual x resolution that is not
supported by the hardware. Cyblafb tries to adapt vyres first because
vxres decides if ywrap scrolling is possible or not.
Attempts to disable acceleration are ignored, I believe that this is
safe.
Some video modes that should work do not work as expected. If you use
the standard fb.modes, fbset 640x480-60 will program that mode, but
you will see a vertical area, about two characters wide, with only
much darker characters than the other characters on the screen.
Cyblafb does allow that mode to be set, as it does not violate the
official specifications. It would need a lot of code to reliably sort
out all invalid modes, playing around with the margin values will
give a valid mode quickly. And if cyblafb would detect such an invalid
mode, should it silently alter the requested values or should it
report an error? Both options have some pros and cons. As stated
above, none of the startup modes are affected, and if you set
verbosity to 1 or higher, cyblafb will print the fbset command that
would be needed to program that mode using fbset.
Other Parameters
================
crt don't autodetect, assume monitor connected to
standard VGA connector
fp don't autodetect, assume flat panel display
connected to flat panel monitor interface
nativex inform driver about native x resolution of
flat panel monitor connected to special
interface (should be autodetected)
stretch stretch image to adapt low resolution modes to
higer resolutions of flat panel monitors
connected to special interface
center center image to adapt low resolution modes to
higer resolutions of flat panel monitors
connected to special interface
memsize use if autodetected memsize is wrong ...
should never be necessary
nopcirr disable PCI read retry
nopciwr disable PCI write retry
nopcirb disable PCI read bursts
nopciwb disable PCI write bursts
bpp bpp for specified modes
valid values: 8 || 16 || 24 || 32
ref refresh rate for specified mode
valid values: 50 <= ref <= 85
mode 640x480 or 800x600 or 1024x768 or 1280x1024
if not specified, the startup mode will be detected
and used, so you might also use the vga=??? parameter
described in vesafb.txt. If you do not specify a mode,
bpp and ref parameters are ignored.
verbosity 0 is the default, increase to at least 2 for every
bug report!
Development hints
=================
It's much faster do compile a module and to load the new version after
unloading the old module than to compile a new kernel and to reboot. So if you
try to work on cyblafb, it might be a good idea to use cyblafb as a module.
In real life, fast often means dangerous, and that's also the case here. If
you introduce a serious bug when cyblafb is compiled into the kernel, the
kernel will lock or oops with a high probability before the file system is
mounted, and the danger for your data is low. If you load a broken own version
of cyblafb on a running system, the danger for the integrity of the file
system is much higher as you might need a hard reset afterwards. Decide
yourself.
Module unloading, the vfb method
================================
If you want to unload/reload cyblafb using the virtual framebuffer, you need
to enable vfb support in the kernel first. After that, load the modules as
shown below:
modprobe vfb vfb_enable=1
modprobe fbcon
modprobe cyblafb
fbset -fb /dev/fb1 1280x1024-60 -vyres 2662
con2fb /dev/fb1 /dev/tty1
...
If you now made some changes to cyblafb and want to reload it, you might do it
as show below:
con2fb /dev/fb0 /dev/tty1
...
rmmod cyblafb
modprobe cyblafb
con2fb /dev/fb1 /dev/tty1
...
Of course, you might choose another mode, and most certainly you also want to
map some other /dev/tty* to the real framebuffer device. You might also choose
to compile fbcon as a kernel module or place it permanently in the kernel.
I do not know of any way to unload fbcon, and fbcon will prevent the
framebuffer device loaded first from unloading. [If there is a way, then
please add a description here!]
Module unloading, the vesafb method
===================================
Configure the kernel:
<*> Support for frame buffer devices
[*] VESA VGA graphics support
<M> Cyberblade/i1 support
Add e.g. "video=vesafb:ypan vga=0x307" to the kernel parameters. The ypan
parameter is important, choose any vga parameter you like as long as it is
a graphics mode.
After booting, load cyblafb without any mode and bpp parameter and assign
cyblafb to individual ttys using con2fb, e.g.:
modprobe cyblafb
con2fb /dev/fb1 /dev/tty1
Unloading cyblafb works without problems after you assign vesafb to all
ttys again, e.g.:
con2fb /dev/fb0 /dev/tty1
rmmod cyblafb

View File

@ -1,29 +0,0 @@
0.62
====
- the vesafb parameter has been removed as I decided to allow the
feature without any special parameter.
- Cyblafb does not use the vga style of panning any longer, now the
"right view" register in the graphics engine IO space is used. Without
that change it was impossible to use all available memory, and without
access to all available memory it is impossible to ywrap.
- The imageblit function now uses hardware acceleration for all font
widths. Hardware blitting across pixel column 2048 is broken in the
cyberblade/i1 graphics core, but we work around that hardware bug.
- modes with vxres != xres are supported now.
- ywrap scrolling is supported now and the default. This is a big
performance gain.
- default video modes use vyres > yres and vxres > xres to allow
almost optimal scrolling speed for normal and rotated screens
- some features mainly usefull for debugging the upper layers of the
framebuffer system have been added, have a look at the code
- fixed: Oops after unloading cyblafb when reading /proc/io*
- we work around some bugs of the higher framebuffer layers.

View File

@ -1,85 +0,0 @@
I tried the following framebuffer drivers:
- TRIDENTFB is full of bugs. Acceleration is broken for Blade3D
graphics cores like the cyberblade/i1. It claims to support a great
number of devices, but documentation for most of these devices is
unfortunately not available. There is _no_ reason to use tridentfb
for cyberblade/i1 + CRT users. VESAFB is faster, and the one
advantage, mode switching, is broken in tridentfb.
- VESAFB is used by many distributions as a standard. Vesafb does
not support mode switching. VESAFB is a bit faster than the working
configurations of TRIDENTFB, but it is still too slow, even if you
use ypan.
- EPIAFB (you'll find it on sourceforge) supports the Cyberblade/i1
graphics core, but it still has serious bugs and developement seems
to have stopped. This is the one driver with TV-out support. If you
do need this feature, try epiafb.
None of these drivers was a real option for me.
I believe that is unreasonable to change code that announces to support 20
devices if I only have more or less sufficient documentation for exactly one
of these. The risk of breaking device foo while fixing device bar is too high.
So I decided to start CyBlaFB as a stripped down tridentfb.
All code specific to other Trident chips has been removed. After that there
were a lot of cosmetic changes to increase the readability of the code. All
register names were changed to those mnemonics used in the datasheet. Function
and macro names were changed if they hindered easy understanding of the code.
After that I debugged the code and implemented some new features. I'll try to
give a little summary of the main changes:
- calculation of vertical and horizontal timings was fixed
- video signal quality has been improved dramatically
- acceleration:
- fillrect and copyarea were fixed and reenabled
- color expanding imageblit was newly implemented, color
imageblit (only used to draw the penguine) still uses the
generic code.
- init of the acceleration engine was improved and moved to a
place where it really works ...
- sync function has a timeout now and tries to reset and
reinit the accel engine if necessary
- fewer slow copyarea calls when doing ypan scrolling by using
undocumented bit d21 of screen start address stored in
CR2B[5]. BIOS does use it also, so this should be safe.
- cyblafb rejects any attempt to set modes that would cause vclk
values above reasonable 230 MHz. 32bit modes use a clock
multiplicator of 2, so fbset does show the correct values for
pixclock but not for vclk in this case. The fbset limit is 115 MHz
for 32 bpp modes.
- cyblafb rejects modes known to be broken or unimplemented (all
interlaced modes, all doublescan modes for now)
- cyblafb now works independant of the video mode in effect at startup
time (tridentfb does not init all needed registers to reasonable
values)
- switching between video modes does work reliably now
- the first video mode now is the one selected on startup using the
vga=???? mechanism or any of
- 640x480, 800x600, 1024x768, 1280x1024
- 8, 16, 24 or 32 bpp
- refresh between 50 Hz and 85 Hz, 1 Hz steps (1280x1024-32
is limited to 63Hz)
- pci retry and pci burst mode are settable (try to disable if you
experience latency problems)
- built as a module cyblafb might be unloaded and reloaded using
the vfb module and con2vt or might be used together with vesafb

View File

@ -64,10 +64,10 @@ Who: Pavel Machek <pavel@suse.cz>
---------------------------
What: Video4Linux API 1 ioctls and video_decoder.h from Video devices.
When: December 2008
Files: include/linux/video_decoder.h include/linux/videodev.h
Check: include/linux/video_decoder.h include/linux/videodev.h
What: Video4Linux API 1 ioctls and from Video devices.
When: July 2009
Files: include/linux/videodev.h
Check: include/linux/videodev.h
Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
series. The old API have lots of drawbacks and don't provide enough
means to work with all video and audio standards. The newer API is
@ -311,6 +311,18 @@ Who: Vlad Yasevich <vladislav.yasevich@hp.com>
---------------------------
What: Ability for non root users to shm_get hugetlb pages based on mlock
resource limits
When: 2.6.31
Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
have CAP_IPC_LOCK to be able to allocate shm segments backed by
huge pages. The mlock based rlimit check to allow shm hugetlb is
inconsistent with mmap based allocations. Hence it is being
deprecated.
Who: Ravikiran Thirumalai <kiran@scalex86.org>
---------------------------
What: CONFIG_THERMAL_HWMON
When: January 2009
Why: This option was introduced just to allow older lm-sensors userspace
@ -380,3 +392,35 @@ Why: The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t)
have been kept around for migration reasons. After more than two years
it's time to remove them finally
Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
What: fakephp and associated sysfs files in /sys/bus/pci/slots/
When: 2011
Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
represent a machine's physical PCI slots. The change in semantics
had userspace implications, as the hotplug core no longer allowed
drivers to create multiple sysfs files per physical slot (required
for multi-function devices, e.g.). fakephp was seen as a developer's
tool only, and its interface changed. Too late, we learned that
there were some users of the fakephp interface.
In 2.6.30, the original fakephp interface was restored. At the same
time, the PCI core gained the ability that fakephp provided, namely
function-level hot-remove and hot-add.
Since the PCI core now provides the same functionality, exposed in:
/sys/bus/pci/rescan
/sys/bus/pci/devices/.../remove
/sys/bus/pci/devices/.../rescan
there is no functional reason to maintain fakephp as well.
We will keep the existing module so that 'modprobe fakephp' will
present the old /sys/bus/pci/slots/... interface for compatibility,
but users are urged to migrate their applications to the API above.
After a reasonable transition period, we will remove the legacy
fakephp interface.
Who: Alex Chiang <achiang@hp.com>

View File

@ -505,7 +505,7 @@ prototypes:
void (*open)(struct vm_area_struct*);
void (*close)(struct vm_area_struct*);
int (*fault)(struct vm_area_struct*, struct vm_fault *);
int (*page_mkwrite)(struct vm_area_struct *, struct page *);
int (*page_mkwrite)(struct vm_area_struct *, struct vm_fault *);
int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:

View File

@ -85,7 +85,7 @@ Note: More extensive information for getting started with ext4 can be
* extent format more robust in face of on-disk corruption due to magics,
* internal redundancy in tree
* improved file allocation (multi-block alloc)
* fix 32000 subdirectory limit
* lift 32000 subdirectory limit imposed by i_links_count[1]
* nsec timestamps for mtime, atime, ctime, create time
* inode version field on disk (NFSv4, Lustre)
* reduced e2fsck time via uninit_bg feature
@ -100,6 +100,9 @@ Note: More extensive information for getting started with ext4 can be
* efficent new ordered mode in JBD2 and ext4(avoid using buffer head to force
the ordering)
[1] Filesystems with a block size of 1k may see a limit imposed by the
directory hash tree having a maximum depth of two.
2.2 Candidate features for future inclusion
* Online defrag (patches available but not well tested)
@ -180,8 +183,8 @@ commit=nrsec (*) Ext4 can be told to sync all its data and metadata
performance.
barrier=<0|1(*)> This enables/disables the use of write barriers in
the jbd code. barrier=0 disables, barrier=1 enables.
This also requires an IO stack which can support
barrier(*) the jbd code. barrier=0 disables, barrier=1 enables.
nobarrier This also requires an IO stack which can support
barriers, and if jbd gets an error on a barrier
write, it will disable again with a warning.
Write barriers enforce proper on-disk ordering
@ -189,6 +192,9 @@ barrier=<0|1(*)> This enables/disables the use of write barriers in
safe to use, at some performance penalty. If
your disks are battery-backed in one way or another,
disabling barriers may safely improve performance.
The mount options "barrier" and "nobarrier" can
also be used to enable or disable barriers, for
consistency with other ext4 mount options.
inode_readahead=n This tuning parameter controls the maximum
number of inode table blocks that ext4's inode
@ -310,6 +316,24 @@ journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the
a slightly higher priority than the default I/O
priority.
auto_da_alloc(*) Many broken applications don't use fsync() when
noauto_da_alloc replacing existing files via patterns such as
fd = open("foo.new")/write(fd,..)/close(fd)/
rename("foo.new", "foo"), or worse yet,
fd = open("foo", O_TRUNC)/write(fd,..)/close(fd).
If auto_da_alloc is enabled, ext4 will detect
the replace-via-rename and replace-via-truncate
patterns and force that any delayed allocation
blocks are allocated such that at the next
journal commit, in the default data=ordered
mode, the data blocks of the new file are forced
to disk before the rename() operation is
commited. This provides roughly the same level
of guarantees as ext3, and avoids the
"zero-length" problem that can happen when a
system crashes before the delayed allocation
blocks are forced to disk.
Data Mode
=========
There are 3 different data modes:

View File

@ -940,27 +940,6 @@ Table 1-10: Files in /proc/fs/ext4/<devname>
File Content
mb_groups details of multiblock allocator buddy cache of free blocks
mb_history multiblock allocation history
stats controls whether the multiblock allocator should start
collecting statistics, which are shown during the unmount
group_prealloc the multiblock allocator will round up allocation
requests to a multiple of this tuning parameter if the
stripe size is not set in the ext4 superblock
max_to_scan The maximum number of extents the multiblock allocator
will search to find the best extent
min_to_scan The minimum number of extents the multiblock allocator
will search to find the best extent
order2_req Tuning parameter which controls the minimum size for
requests (as a power of 2) where the buddy cache is
used
stream_req Files which have fewer blocks than this tunable
parameter will have their blocks allocated out of a
block group specific preallocation pool, so that small
files are packed closely together. Each large file
will have its blocks allocated out of its own unique
preallocation pool.
inode_readahead Tuning parameter which controls the maximum number of
inode table blocks that ext4's inode table readahead
algorithm will pre-read into the buffer cache
..............................................................................

View File

@ -12,6 +12,7 @@ that support it. For example, a given bus might look like this:
| |-- enable
| |-- irq
| |-- local_cpus
| |-- remove
| |-- resource
| |-- resource0
| |-- resource1
@ -36,6 +37,7 @@ files, each with their own function.
enable Whether the device is enabled (ascii, rw)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
remove remove device from kernel's list (ascii, wo)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
@ -46,6 +48,7 @@ files, each with their own function.
ro - read only file
rw - file is readable and writable
wo - write only file
mmap - file is mmapable
ascii - file contains ascii text
binary - file contains binary data
@ -73,6 +76,13 @@ that the device must be enabled for a rom read to return data succesfully.
In the event a driver is not bound to the device, it can be enabled using the
'enable' file, documented above.
The 'remove' file is used to remove the PCI device, by writing a non-zero
integer to the file. This does not involve any kind of hot-plug functionality,
e.g. powering off the device. The device is removed from the kernel's list of
PCI devices, the sysfs directory for it is removed, and the device will be
removed from any drivers attached to it. Removal of PCI root buses is
disallowed.
Accessing legacy resources through sysfs
----------------------------------------

View File

@ -49,12 +49,9 @@ of up to +/- 0.5 degrees even when compared against precise temperature
readings. Be sure to have a high vs. low temperature limit gap of al least
1.0 degree Celsius to avoid Tout "bouncing", though!
As for alarms, you can read the alarm status of the DS1621 via the 'alarms'
/sys file interface. The result consists mainly of bit 6 and 5 of the
configuration register of the chip; bit 6 (0x40 or 64) is the high alarm
bit and bit 5 (0x20 or 32) the low one. These bits are set when the high or
low limits are met or exceeded and are reset by the module as soon as the
respective temperature ranges are left.
The alarm bits are set when the high or low limits are met or exceeded and
are reset by the module as soon as the respective temperature ranges are
left.
The alarm registers are in no way suitable to find out about the actual
status of Tout. They will only tell you about its history, whether or not
@ -64,45 +61,3 @@ with neither of the alarms set.
Temperature conversion of the DS1621 takes up to 1000ms; internal access to
non-volatile registers may last for 10ms or below.
High Accuracy Temperature Reading
---------------------------------
As said before, the temperature issued via the 9-bit i2c-bus data is
somewhat arbitrary. Internally, the temperature conversion is of a
different kind that is explained (not so...) well in the DS1621 data sheet.
To cut the long story short: Inside the DS1621 there are two oscillators,
both of them biassed by a temperature coefficient.
Higher resolution of the temperature reading can be achieved using the
internal projection, which means taking account of REG_COUNT and REG_SLOPE
(the driver manages them):
Taken from Dallas Semiconductors App Note 068: 'Increasing Temperature
Resolution on the DS1620' and App Note 105: 'High Resolution Temperature
Measurement with Dallas Direct-to-Digital Temperature Sensors'
- Read the 9-bit temperature and strip the LSB (Truncate the .5 degs)
- The resulting value is TEMP_READ.
- Then, read REG_COUNT.
- And then, REG_SLOPE.
TEMP = TEMP_READ - 0.25 + ((REG_SLOPE - REG_COUNT) / REG_SLOPE)
Note that this is what the DONE bit in the DS1621 configuration register is
good for: Internally, one temperature conversion takes up to 1000ms. Before
that conversion is complete you will not be able to read valid things out
of REG_COUNT and REG_SLOPE. The DONE bit, as you may have guessed by now,
tells you whether the conversion is complete ("done", in plain English) and
thus, whether the values you read are good or not.
The DS1621 has two modes of operation: "Continuous" conversion, which can
be understood as the default stand-alone mode where the chip gets the
temperature and controls external devices via its Tout pin or tells other
i2c's about it if they care. The other mode is called "1SHOT", that means
that it only figures out about the temperature when it is explicitly told
to do so; this can be seen as power saving mode.
Now if you want to read REG_COUNT and REG_SLOPE, you have to either stop
the continuous conversions until the contents of these registers are valid,
or, in 1SHOT mode, you have to have one conversion made.

View File

@ -1,11 +1,11 @@
Kernel driver lis3lv02d
==================
=======================
Supported chips:
* STMicroelectronics LIS3LV02DL and LIS3LV02DQ
Author:
Authors:
Yan Burman <burman.yan@gmail.com>
Eric Piel <eric.piel@tremplin-utc.net>
@ -15,7 +15,7 @@ Description
This driver provides support for the accelerometer found in various HP
laptops sporting the feature officially called "HP Mobile Data
Protection System 3D" or "HP 3D DriveGuard". It detect automatically
Protection System 3D" or "HP 3D DriveGuard". It detects automatically
laptops with this sensor. Known models (for now the HP 2133, nc6420,
nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
automatically oriented on standard way (eg: you can directly play
@ -27,7 +27,7 @@ position - 3D position that the accelerometer reports. Format: "(x,y,z)"
calibrate - read: values (x, y, z) that are used as the base for input
class device operation.
write: forces the base to be recalibrated with the current
position.
position.
rate - reports the sampling rate of the accelerometer device in HZ
This driver also provides an absolute input class device, allowing
@ -48,7 +48,7 @@ For better compatibility between the various laptops. The values reported by
the accelerometer are converted into a "standard" organisation of the axes
(aka "can play neverball out of the box"):
* When the laptop is horizontal the position reported is about 0 for X and Y
and a positive value for Z
and a positive value for Z
* If the left side is elevated, X increases (becomes positive)
* If the front side (where the touchpad is) is elevated, Y decreases
(becomes negative)
@ -59,3 +59,13 @@ email to the authors to add it to the database. When reporting a new
laptop, please include the output of "dmidecode" plus the value of
/sys/devices/platform/lis3lv02d/position in these four cases.
Q&A
---
Q: How do I safely simulate freefall? I have an HP "portable
workstation" which has about 3.5kg and a plastic case, so letting it
fall to the ground is out of question...
A: The sensor is pretty sensitive, so your hands can do it. Lift it
into free space, follow the fall with your hands for like 10
centimeters. That should be enough to trigger the detection.

View File

@ -0,0 +1,50 @@
Kernel driver ltc4215
=====================
Supported chips:
* Linear Technology LTC4215
Prefix: 'ltc4215'
Addresses scanned: 0x44
Datasheet:
http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1003,C1006,C1163,P17572,D12697
Author: Ira W. Snyder <iws@ovro.caltech.edu>
Description
-----------
The LTC4215 controller allows a board to be safely inserted and removed
from a live backplane.
Usage Notes
-----------
This driver does not probe for LTC4215 devices, due to the fact that some
of the possible addresses are unfriendly to probing. You will need to use
the "force" parameter to tell the driver where to find the device.
Example: the following will load the driver for an LTC4215 at address 0x44
on I2C bus #0:
$ modprobe ltc4215 force=0,0x44
Sysfs entries
-------------
The LTC4215 has built-in limits for overvoltage, undervoltage, and
undercurrent warnings. This makes it very likely that the reference
circuit will be used.
in1_input input voltage
in2_input output voltage
in1_min_alarm input undervoltage alarm
in1_max_alarm input overvoltage alarm
curr1_input current
curr1_max_alarm overcurrent alarm
power1_input power usage
power1_alarm power bad alarm

View File

@ -365,6 +365,7 @@ energy[1-*]_input Cumulative energy use
Unit: microJoule
RO
**********
* Alarms *
**********
@ -453,6 +454,27 @@ beep_mask Bitmask for beep.
RW
***********************
* Intrusion detection *
***********************
intrusion[0-*]_alarm
Chassis intrusion detection
0: OK
1: intrusion detected
RW
Contrary to regular alarm flags which clear themselves
automatically when read, this one sticks until cleared by
the user. This is done by writing 0 to the file. Writing
other values is unsupported.
intrusion[0-*]_beep
Chassis intrusion beep
0: disable
1: enable
RW
sysfs attribute writes interpretation
-------------------------------------

View File

@ -2,30 +2,40 @@ Kernel driver w83627ehf
=======================
Supported chips:
* Winbond W83627EHF/EHG/DHG (ISA access ONLY)
* Winbond W83627EHF/EHG (ISA access ONLY)
Prefix: 'w83627ehf'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet:
http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83627EHF_%20W83627EHGb.pdf
DHG datasheet confidential.
http://www.nuvoton.com.tw/NR/rdonlyres/A6A258F0-F0C9-4F97-81C0-C4D29E7E943E/0/W83627EHF.pdf
* Winbond W83627DHG
Prefix: 'w83627dhg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet:
http://www.nuvoton.com.tw/NR/rdonlyres/7885623D-A487-4CF9-A47F-30C5F73D6FE6/0/W83627DHG.pdf
* Winbond W83667HG
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
Authors:
Jean Delvare <khali@linux-fr.org>
Yuan Mu (Winbond)
Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
Gong Jun <JGong@nuvoton.com>
Description
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG, and
W83627DHG super I/O chips. We will refer to them collectively as Winbond chips.
This driver implements support for the Winbond W83627EHF, W83627EHG,
W83627DHG and W83667HG super I/O chips. We will refer to them collectively
as Winbond chips.
The chips implement three temperature sensors, five fan rotation
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG), alarms with beep
warnings (control unimplemented), and some automatic fan regulation
strategies (plus manual fan control mode).
VID (6 pins for the 627EHF/EHG, 8 pins for the 627DHG and 667HG), alarms
with beep warnings (control unimplemented), and some automatic fan
regulation strategies (plus manual fan control mode).
Temperatures are measured in degrees Celsius and measurement resolution is 1
degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when
@ -54,7 +64,8 @@ follows:
temp1 -> pwm1
temp2 -> pwm2
temp3 -> pwm3
prog -> pwm4 (the programmable setting is not supported by the driver)
prog -> pwm4 (not on 667HG; the programmable setting is not supported by
the driver)
/sys files
----------

View File

@ -122,10 +122,8 @@ Code Seq# Include File Comments
'c' 00-7F linux/coda.h conflict!
'c' 80-9F arch/s390/include/asm/chsc.h
'd' 00-FF linux/char/drm/drm/h conflict!
'd' 00-DF linux/video_decoder.h conflict!
'd' F0-FF linux/digi1.h
'e' all linux/digi1.h conflict!
'e' 00-1F linux/video_encoder.h conflict!
'e' 00-1F net/irda/irtty.h conflict!
'f' 00-1F linux/ext2_fs.h
'h' 00-7F Charon filesystem

View File

@ -492,6 +492,16 @@ and is between 256 and 4096 characters. It is defined in the file
Range: 0 - 8192
Default: 64
dma_debug=off If the kernel is compiled with DMA_API_DEBUG support
this option disables the debugging code at boot.
dma_debug_entries=<number>
This option allows to tune the number of preallocated
entries for DMA-API debugging code. One entry is
required per DMA-API allocation. Use this if the
DMA-API debugging code disables itself because the
architectural default is too low.
hpet= [X86-32,HPET] option to control HPET usage
Format: { enable (default) | disable | force |
verbose }
@ -1687,6 +1697,8 @@ and is between 256 and 4096 characters. It is defined in the file
See also Documentation/blockdev/paride.txt.
pci=option[,option...] [PCI] various PCI subsystem options:
earlydump [X86] dump PCI config space before the kernel
changes anything
off [X86] don't probe for the PCI bus
bios [X86-32] force use of PCI BIOS, don't access
the hardware directly. Use this if your machine
@ -1786,6 +1798,15 @@ and is between 256 and 4096 characters. It is defined in the file
cbmemsize=nn[KMG] The fixed amount of bus space which is
reserved for the CardBus bridge's memory
window. The default value is 64 megabytes.
resource_alignment=
Format:
[<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
Specifies alignment and device to reassign
aligned memory resources.
If <order of align> is not specified,
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
windows need to be expanded.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.

View File

@ -1630,6 +1630,13 @@ static bool service_io(struct device *dev)
}
}
/* OK, so we noted that it was pretty poor to use an fdatasync as a
* barrier. But Christoph Hellwig points out that we need a sync
* *afterwards* as well: "Barriers specify no reordering to the front
* or the back." And Jens Axboe confirmed it, so here we are: */
if (out->type & VIRTIO_BLK_T_BARRIER)
fdatasync(vblk->fd);
/* We can't trigger an IRQ, because we're not the Launcher. It does
* that when we tell it we're done. */
add_used(dev->vq, head, wlen);

View File

@ -27,33 +27,37 @@ lock-class.
State
-----
The validator tracks lock-class usage history into 5 separate state bits:
The validator tracks lock-class usage history into 4n + 1 separate state bits:
- 'ever held in hardirq context' [ == hardirq-safe ]
- 'ever held in softirq context' [ == softirq-safe ]
- 'ever held with hardirqs enabled' [ == hardirq-unsafe ]
- 'ever held with softirqs and hardirqs enabled' [ == softirq-unsafe ]
- 'ever held in STATE context'
- 'ever head as readlock in STATE context'
- 'ever head with STATE enabled'
- 'ever head as readlock with STATE enabled'
Where STATE can be either one of (kernel/lockdep_states.h)
- hardirq
- softirq
- reclaim_fs
- 'ever used' [ == !unused ]
When locking rules are violated, these 4 state bits are presented in the
locking error messages, inside curlies. A contrived example:
When locking rules are violated, these state bits are presented in the
locking error messages, inside curlies. A contrived example:
modprobe/2287 is trying to acquire lock:
(&sio_locks[i].lock){--..}, at: [<c02867fd>] mutex_lock+0x21/0x24
(&sio_locks[i].lock){-.-...}, at: [<c02867fd>] mutex_lock+0x21/0x24
but task is already holding lock:
(&sio_locks[i].lock){--..}, at: [<c02867fd>] mutex_lock+0x21/0x24
(&sio_locks[i].lock){-.-...}, at: [<c02867fd>] mutex_lock+0x21/0x24
The bit position indicates hardirq, softirq, hardirq-read,
softirq-read respectively, and the character displayed in each
indicates:
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
'.' acquired while irqs disabled
'+' acquired in irq context
'-' acquired with irqs enabled
'?' read acquired in irq context with irqs enabled.
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.

View File

@ -0,0 +1,62 @@
Kernel driver isl29003
=====================
Supported chips:
* Intersil ISL29003
Prefix: 'isl29003'
Addresses scanned: none
Datasheet:
http://www.intersil.com/data/fn/fn7464.pdf
Author: Daniel Mack <daniel@caiaq.de>
Description
-----------
The ISL29003 is an integrated light sensor with a 16-bit integrating type
ADC, I2C user programmable lux range select for optimized counts/lux, and
I2C multi-function control and monitoring capabilities. The internal ADC
provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by
artificial light sources.
The driver allows to set the lux range, the bit resolution, the operational
mode (see below) and the power state of device and can read the current lux
value, of course.
Detection
---------
The ISL29003 does not have an ID register which could be used to identify
it, so the detection routine will just try to read from the configured I2C
addess and consider the device to be present as soon as it ACKs the
transfer.
Sysfs entries
-------------
range:
0: 0 lux to 1000 lux (default)
1: 0 lux to 4000 lux
2: 0 lux to 16,000 lux
3: 0 lux to 64,000 lux
resolution:
0: 2^16 cycles (default)
1: 2^12 cycles
2: 2^8 cycles
3: 2^4 cycles
mode:
0: diode1's current (unsigned 16bit) (default)
1: diode1's current (unsigned 16bit)
2: difference between diodes (l1 - l2, signed 15bit)
power_state:
0: device is disabled (default)
1: device is enabled
lux (read only):
returns the value from the last sensor reading

View File

@ -35,30 +35,30 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
reg = <82a8 4>;
ranges = <0 8100 1a4>;
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a4>;
interrupt-parent = <&ipic>;
interrupts = <47 8>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <0>;
reg = <0 80>;
reg = <0 0x80>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <1>;
reg = <80 80>;
reg = <0x80 0x80>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <2>;
reg = <100 80>;
reg = <0x100 0x80>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <3>;
reg = <180 80>;
reg = <0x180 0x80>;
};
};
@ -93,36 +93,36 @@ Example:
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
reg = <21300 4>;
ranges = <0 21100 200>;
reg = <0x21300 4>;
ranges = <0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
reg = <0 80>;
reg = <0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <14 2>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
reg = <80 80>;
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <15 2>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
reg = <100 80>;
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <16 2>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
reg = <180 80>;
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <17 2>;
interrupts = <23 2>;
};
};

View File

@ -0,0 +1,24 @@
* Freescale Enhanced Secure Digital Host Controller (eSDHC)
The Enhanced Secure Digital Host Controller provides an interface
for MMC, SD, and SDIO types of memory cards.
Required properties:
- compatible : should be
"fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
"fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
- reg : should contain eSDHC registers location and length.
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
Example:
sdhci@2e000 {
compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
/* Filled in by U-Boot */
clock-frequency = <0>;
};

View File

@ -4,44 +4,56 @@ The SSI is a serial device that communicates with audio codecs. It can
be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties:
- compatible : compatible list, containing "fsl,ssi"
- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on
- reg : offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and
level information for the interrupt. This should be
encoded based on the information in section 2)
depending on the type of interrupt controller you
have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- fsl,mode : the operating mode for the SSI interface
"i2s-slave" - I2S mode, SSI is clock slave
"i2s-master" - I2S mode, SSI is clock master
"lj-slave" - left-justified mode, SSI is clock slave
"lj-master" - l.j. mode, SSI is clock master
"rj-slave" - right-justified mode, SSI is clock slave
"rj-master" - r.j., SSI is clock master
"ac97-slave" - AC97 mode, SSI is clock slave
"ac97-master" - AC97 mode, SSI is clock master
- fsl,playback-dma: phandle to a node for the DMA channel to use for
- compatible: Compatible list, contains "fsl,ssi".
- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
- reg: Offset and length of the register set for the device.
- interrupts: <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and
level information for the interrupt. This should be
encoded based on the information in section 2)
depending on the type of interrupt controller you
have.
- interrupt-parent: The phandle for the interrupt controller that
services interrupts for this device.
- fsl,mode: The operating mode for the SSI interface.
"i2s-slave" - I2S mode, SSI is clock slave
"i2s-master" - I2S mode, SSI is clock master
"lj-slave" - left-justified mode, SSI is clock slave
"lj-master" - l.j. mode, SSI is clock master
"rj-slave" - right-justified mode, SSI is clock slave
"rj-master" - r.j., SSI is clock master
"ac97-slave" - AC97 mode, SSI is clock slave
"ac97-master" - AC97 mode, SSI is clock master
- fsl,playback-dma: Phandle to a node for the DMA channel to use for
playback of audio. This is typically dictated by SOC
design. See the notes below.
- fsl,capture-dma: phandle to a node for the DMA channel to use for
- fsl,capture-dma: Phandle to a node for the DMA channel to use for
capture (recording) of audio. This is typically dictated
by SOC design. See the notes below.
- fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
This number is the maximum allowed value for SFCSR[TFWM0].
- fsl,ssi-asynchronous:
If specified, the SSI is to be programmed in asynchronous
mode. In this mode, pins SRCK, STCK, SRFS, and STFS must
all be connected to valid signals. In synchronous mode,
SRCK and SRFS are ignored. Asynchronous mode allows
playback and capture to use different sample sizes and
sample rates. Some drivers may require that SRCK and STCK
be connected together, and SRFS and STFS be connected
together. This would still allow different sample sizes,
but not different sample rates.
Optional properties:
- codec-handle : phandle to a 'codec' node that defines an audio
codec connected to this SSI. This node is typically
a child of an I2C or other control node.
- codec-handle: Phandle to a 'codec' node that defines an audio
codec connected to this SSI. This node is typically
a child of an I2C or other control node.
Child 'codec' node required properties:
- compatible : compatible list, contains the name of the codec
- compatible: Compatible list, contains the name of the codec
Child 'codec' node optional properties:
- clock-frequency : The frequency of the input clock, which typically
comes from an on-board dedicated oscillator.
- clock-frequency: The frequency of the input clock, which typically comes
from an on-board dedicated oscillator.
Notes on fsl,playback-dma and fsl,capture-dma:

View File

@ -0,0 +1,23 @@
MMC/SD/SDIO slot directly connected to a SPI bus
Required properties:
- compatible : should be "mmc-spi-slot".
- reg : should specify SPI address (chip-select number).
- spi-max-frequency : maximum frequency for this device (Hz).
- voltage-ranges : two cells are required, first cell specifies minimum
slot voltage (mV), second cell specifies maximum slot voltage (mV).
Several ranges could be specified.
- gpios : (optional) may specify GPIOs in this order: Card-Detect GPIO,
Write-Protect GPIO.
Example:
mmc-slot@0 {
compatible = "fsl,mpc8323rdb-mmc-slot",
"mmc-spi-slot";
reg = <0>;
gpios = <&qe_pio_d 14 1
&qe_pio_d 15 0>;
voltage-ranges = <3300 3300>;
spi-max-frequency = <50000000>;
};

View File

@ -81,6 +81,8 @@ On all - write a character to /proc/sysrq-trigger. e.g.:
'i' - Send a SIGKILL to all processes, except for init.
'j' - Forcibly "Just thaw it" - filesystems frozen by the FIFREEZE ioctl.
'k' - Secure Access Key (SAK) Kills all programs on the current virtual
console. NOTE: See important comments below in SAK section.
@ -160,6 +162,9 @@ t'E'rm and k'I'll are useful if you have some sort of runaway process you
are unable to kill any other way, especially if it's spawning other
processes.
"'J'ust thaw it" is useful if your system becomes unresponsive due to a frozen
(probably root) filesystem via the FIFREEZE ioctl.
* Sometimes SysRq seems to get 'stuck' after using it, what can I do?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
That happens to me, also. I've found that tapping shift, alt, and control

View File

@ -135,7 +135,7 @@
134 -> Adlink RTV24
135 -> DViCO FusionHDTV 5 Lite [18ac:d500]
136 -> Acorp Y878F [9511:1540]
137 -> Conceptronic CTVFMi v2
137 -> Conceptronic CTVFMi v2 [036e:109e]
138 -> Prolink Pixelview PV-BT878P+ (Rev.2E)
139 -> Prolink PixelView PlayTV MPEG2 PV-M4900
140 -> Osprey 440 [0070:ff07]
@ -154,3 +154,7 @@
153 -> PHYTEC VD-012 (bt878)
154 -> PHYTEC VD-012-X1 (bt878)
155 -> PHYTEC VD-012-X2 (bt878)
156 -> IVCE-8784 [0000:f050,0001:f050,0002:f050,0003:f050]
157 -> Geovision GV-800(S) (master) [800a:763d]
158 -> Geovision GV-800(S) (slave) [800b:763d,800c:763d,800d:763d]
159 -> ProVideo PV183 [1830:1540,1831:1540,1832:1540,1833:1540,1834:1540,1835:1540,1836:1540,1837:1540]

View File

@ -12,3 +12,7 @@
11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78]
12 -> Leadtek Winfast PxDVR3200 H [107d:6681]
13 -> Compro VideoMate E650F [185b:e800]
14 -> TurboSight TBS 6920 [6920:8888]
15 -> TeVii S470 [d470:9022]
16 -> DVBWorld DVB-S2 2005 [0001:2005]
17 -> NetUP Dual DVB-S2 CI [1b55:2a2c]

View File

@ -77,3 +77,4 @@
76 -> SATTRADE ST4200 DVB-S/S2 [b200:4200]
77 -> TBS 8910 DVB-S [8910:8888]
78 -> Prof 6200 DVB-S [b022:3022]
79 -> Terratec Cinergy HT PCI MKII [153b:1177]

View File

@ -7,12 +7,12 @@
6 -> Terratec Cinergy 200 USB (em2800)
7 -> Leadtek Winfast USB II (em2800) [0413:6023]
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a]
9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker (em2820/em2840) [1b80:e302,2304:0207,2304:021a]
10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500]
11 -> Terratec Hybrid XS (em2880) [0ccd:0042]
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b]
17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227]
@ -30,7 +30,6 @@
30 -> Videology 20K14XUSB USB2.0 (em2820/em2840)
31 -> Usbgear VD204v9 (em2821)
32 -> Supercomp USB 2.0 TV (em2821)
33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 (em2821)
34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f]
35 -> Typhoon DVD Maker (em2860)
36 -> NetGMBH Cam (em2860)
@ -58,3 +57,7 @@
58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041]
60 -> Hauppauge WinTV HVR 850 (em2883) [2040:651f]
61 -> Pixelview PlayTV Box 4 USB 2.0 (em2820/em2840)
62 -> Gadmei TVR200 (em2820/em2840)
63 -> Kaiomy TVnPC U2 (em2860) [eb1a:e303]
64 -> Easy Cap Capture DC-60 (em2860)
65 -> IO-DATA GV-MVP/SZ (em2820/em2840) [04bb:0515]

View File

@ -153,3 +153,5 @@
152 -> Asus Tiger Rev:1.00 [1043:4857]
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
156 -> Hauppauge WinTV-HVR1110r3 [0070:6707,0070:6709,0070:670a]

View File

@ -401,8 +401,7 @@ Additional notes for software developers:
first set the correct norm. Well, it seems logically correct: TV
standard is "more constant" for current country than geometry
settings of a variety of TV capture cards which may work in ITU or
square pixel format. Remember that users now can lock the norm to
avoid any ambiguity.
square pixel format.
--
Please note that lavplay/lavrec are also included in the MJPEG-tools
(http://mjpeg.sf.net/).

View File

@ -81,16 +81,6 @@ tuner.o
pal=[bdgil] select PAL variant (used for some tuners
only, important for the audio carrier).
tvmixer.o
registers a mixer device for the TV card's volume/bass/treble
controls (requires a i2c audio control chip like the msp3400).
insmod args:
debug=1 print some debug info to the syslog.
devnr=n allocate device #n (0 == /dev/mixer,
1 = /dev/mixer1, ...), default is to
use the first free one.
tvaudio.o
new, experimental module which is supported to provide a single
driver for all simple i2c audio control chips (tda/tea*).

View File

@ -63,8 +63,8 @@ If you have some knowledge and spare time, please try to fix this
yourself (patches very welcome of course...) You know: The linux
slogan is "Do it yourself".
There is a mailing list: video4linux-list@redhat.com.
https://listman.redhat.com/mailman/listinfo/video4linux-list
There is a mailing list: linux-media@vger.kernel.org
http://vger.kernel.org/vger-lists.html#linux-media
If you have trouble with some specific TV card, try to ask there
instead of mailing me directly. The chance that someone with the

View File

@ -32,6 +32,10 @@ Y, U and V planes. This code assumes frames of 720x576 (PAL) pixels.
The width of a frame is always 720 pixels, regardless of the actual specified
width.
If the height is not a multiple of 32 lines, then the captured video is
missing macroblocks at the end and is unusable. So the height must be a
multiple of 32.
--------------------------------------------------------------------------
#include <stdio.h>

View File

@ -32,6 +32,7 @@ spca561 041e:403b Creative Webcam Vista (VF0010)
zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250)
ov519 041e:4052 Creative Live! VISTA IM
zc3xx 041e:4053 Creative Live!Cam Video IM
vc032x 041e:405b Creative Live! Cam Notebook Ultra (VC0130)
ov519 041e:405f Creative Live! VISTA VF0330
ov519 041e:4060 Creative Live! VISTA VF0350
ov519 041e:4061 Creative Live! VISTA VF0400
@ -193,6 +194,7 @@ spca500 084d:0003 D-Link DSC-350
spca500 08ca:0103 Aiptek PocketDV
sunplus 08ca:0104 Aiptek PocketDVII 1.3
sunplus 08ca:0106 Aiptek Pocket DV3100+
mr97310a 08ca:0111 Aiptek PenCam VGA+
sunplus 08ca:2008 Aiptek Mini PenCam 2 M
sunplus 08ca:2010 Aiptek PocketCam 3M
sunplus 08ca:2016 Aiptek PocketCam 2 Mega
@ -215,6 +217,7 @@ pac207 093a:2468 PAC207
pac207 093a:2470 Genius GF112
pac207 093a:2471 Genius VideoCam ge111
pac207 093a:2472 Genius VideoCam ge110
pac207 093a:2474 Genius iLook 111
pac207 093a:2476 Genius e-Messenger 112
pac7311 093a:2600 PAC7311 Typhoon
pac7311 093a:2601 Philips SPC 610 NC
@ -279,6 +282,7 @@ spca561 10fd:7e50 FlyCam Usb 100
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201)
pac207 145f:013a Trust WB-1300N
vc032x 15b8:6001 HP 2.0 Megapixel
vc032x 15b8:6002 HP 2.0 Megapixel rz406aa
spca501 1776:501c Arowana 300K CMOS Camera
t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops

View File

@ -1,6 +1,6 @@
Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers
Copyright (c) 2008 Tobias Lorenz <tobias.lorenz@gmx.net>
Copyright (c) 2009 Tobias Lorenz <tobias.lorenz@gmx.net>
Information from Silicon Labs
@ -41,7 +41,7 @@ chips are known to work:
- 10c4:818a: Silicon Labs USB FM Radio Reference Design
- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF)
- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700)
- 10c5:819a: DealExtreme USB Radio
- 10c5:819a: Sanei Electric, Inc. FM USB Radio (sold as DealExtreme.com PCear)
Software
@ -52,6 +52,7 @@ Testing is usually done with most application under Debian/testing:
- gradio - GTK FM radio tuner
- kradio - Comfortable Radio Application for KDE
- radio - ncurses-based radio application
- mplayer - The Ultimate Movie Player For Linux
There is also a library libv4l, which can be used. It's going to have a function
for frequency seeking, either by using hardware functionality as in radio-si470x
@ -69,7 +70,7 @@ Audio Listing
USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to
also select SND_USB_AUDIO, as this is required to get sound from the radio. For
listing you have to redirect the sound, for example using one of the following
commands.
commands. Please adjust the audio devices to your needs (/dev/dsp* and hw:x,x).
If you just want to test audio (very poor quality):
cat /dev/dsp1 > /dev/dsp
@ -80,6 +81,10 @@ sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp
If you use arts try:
arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B -
If you use mplayer try:
mplayer -radio adevice=hw=1.0:arate=96000 \
-rawaudio rate=96000 \
radio://<frequency>/capture
Module Parameters
=================

View File

@ -47,7 +47,9 @@ All drivers have the following structure:
3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and
/dev/vtxX) and keeping track of device-node specific data.
4) Filehandle-specific structs containing per-filehandle data.
4) Filehandle-specific structs containing per-filehandle data;
5) video buffer handling.
This is a rough schematic of how it all relates:
@ -82,12 +84,20 @@ You must register the device instance:
v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev);
Registration will initialize the v4l2_device struct and link dev->driver_data
to v4l2_dev. Registration will also set v4l2_dev->name to a value derived from
dev (driver name followed by the bus_id, to be precise). You may change the
name after registration if you want.
to v4l2_dev. If v4l2_dev->name is empty then it will be set to a value derived
from dev (driver name followed by the bus_id, to be precise). If you set it
up before calling v4l2_device_register then it will be untouched. If dev is
NULL, then you *must* setup v4l2_dev->name before calling v4l2_device_register.
The first 'dev' argument is normally the struct device pointer of a pci_dev,
usb_device or platform_device.
usb_device or platform_device. It is rare for dev to be NULL, but it happens
with ISA devices or when one device creates multiple PCI devices, thus making
it impossible to associate v4l2_dev with a particular parent.
You can also supply a notify() callback that can be called by sub-devices to
notify you of events. Whether you need to set this depends on the sub-device.
Any notifications a sub-device supports must be defined in a header in
include/media/<subdevice>.h.
You unregister with:
@ -95,6 +105,17 @@ You unregister with:
Unregistering will also automatically unregister all subdevs from the device.
If you have a hotpluggable device (e.g. a USB device), then when a disconnect
happens the parent device becomes invalid. Since v4l2_device has a pointer to
that parent device it has to be cleared as well to mark that the parent is
gone. To do this call:
v4l2_device_disconnect(struct v4l2_device *v4l2_dev);
This does *not* unregister the subdevs, so you still need to call the
v4l2_device_unregister() function for that. If your driver is not hotpluggable,
then there is no need to call v4l2_device_disconnect().
Sometimes you need to iterate over all devices registered by a specific
driver. This is usually the case if multiple device drivers use the same
hardware. E.g. the ivtvfb driver is a framebuffer driver that uses the ivtv
@ -134,7 +155,7 @@ The recommended approach is as follows:
static atomic_t drv_instance = ATOMIC_INIT(0);
static int __devinit drv_probe(struct pci_dev *dev,
static int __devinit drv_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
{
...
@ -218,7 +239,7 @@ to add new ops and categories.
A sub-device driver initializes the v4l2_subdev struct using:
v4l2_subdev_init(subdev, &ops);
v4l2_subdev_init(sd, &ops);
Afterwards you need to initialize subdev->name with a unique name and set the
module owner. This is done for you if you use the i2c helper functions.
@ -226,7 +247,7 @@ module owner. This is done for you if you use the i2c helper functions.
A device (bridge) driver needs to register the v4l2_subdev with the
v4l2_device:
int err = v4l2_device_register_subdev(device, subdev);
int err = v4l2_device_register_subdev(v4l2_dev, sd);
This can fail if the subdev module disappeared before it could be registered.
After this function was called successfully the subdev->dev field points to
@ -234,17 +255,17 @@ the v4l2_device.
You can unregister a sub-device using:
v4l2_device_unregister_subdev(subdev);
v4l2_device_unregister_subdev(sd);
Afterwards the subdev module can be unloaded and subdev->dev == NULL.
Afterwards the subdev module can be unloaded and sd->dev == NULL.
You can call an ops function either directly:
err = subdev->ops->core->g_chip_ident(subdev, &chip);
err = sd->ops->core->g_chip_ident(sd, &chip);
but it is better and easier to use this macro:
err = v4l2_subdev_call(subdev, core, g_chip_ident, &chip);
err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
The macro will to the right NULL pointer checks and returns -ENODEV if subdev
is NULL, -ENOIOCTLCMD if either subdev->core or subdev->core->g_chip_ident is
@ -252,19 +273,19 @@ NULL, or the actual result of the subdev->ops->core->g_chip_ident ops.
It is also possible to call all or a subset of the sub-devices:
v4l2_device_call_all(dev, 0, core, g_chip_ident, &chip);
v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip);
Any subdev that does not support this ops is skipped and error results are
ignored. If you want to check for errors use this:
err = v4l2_device_call_until_err(dev, 0, core, g_chip_ident, &chip);
err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip);
Any error except -ENOIOCTLCMD will exit the loop with that error. If no
errors (except -ENOIOCTLCMD) occured, then 0 is returned.
The second argument to both calls is a group ID. If 0, then all subdevs are
called. If non-zero, then only those whose group ID match that value will
be called. Before a bridge driver registers a subdev it can set subdev->grp_id
be called. Before a bridge driver registers a subdev it can set sd->grp_id
to whatever value it wants (it's 0 by default). This value is owned by the
bridge driver and the sub-device driver will never modify or use it.
@ -276,6 +297,11 @@ e.g. AUDIO_CONTROLLER and specify that as the group ID value when calling
v4l2_device_call_all(). That ensures that it will only go to the subdev
that needs it.
If the sub-device needs to notify its v4l2_device parent of an event, then
it can call v4l2_subdev_notify(sd, notification, arg). This macro checks
whether there is a notify() callback defined and returns -ENODEV if not.
Otherwise the result of the notify() call is returned.
The advantage of using v4l2_subdev is that it is a generic struct and does
not contain any knowledge about the underlying hardware. So a driver might
contain several subdevs that use an I2C bus, but also a subdev that is
@ -340,6 +366,12 @@ Make sure to call v4l2_device_unregister_subdev(sd) when the remove() callback
is called. This will unregister the sub-device from the bridge driver. It is
safe to call this even if the sub-device was never registered.
You need to do this because when the bridge driver destroys the i2c adapter
the remove() callbacks are called of the i2c devices on that adapter.
After that the corresponding v4l2_subdev structures are invalid, so they
have to be unregistered first. Calling v4l2_device_unregister_subdev(sd)
from the remove() callback ensures that this is always done correctly.
The bridge driver also has some helper functions it can use:
@ -349,8 +381,8 @@ This loads the given module (can be NULL if no module needs to be loaded) and
calls i2c_new_device() with the given i2c_adapter and chip/address arguments.
If all goes well, then it registers the subdev with the v4l2_device. It gets
the v4l2_device by calling i2c_get_adapdata(adapter), so you should make sure
that adapdata is set to v4l2_device when you setup the i2c_adapter in your
driver.
to call i2c_set_adapdata(adapter, v4l2_device) when you setup the i2c_adapter
in your driver.
You can also use v4l2_i2c_new_probed_subdev() which is very similar to
v4l2_i2c_new_subdev(), except that it has an array of possible I2C addresses
@ -358,6 +390,14 @@ that it should probe. Internally it calls i2c_new_probed_device().
Both functions return NULL if something went wrong.
Note that the chipid you pass to v4l2_i2c_new_(probed_)subdev() is usually
the same as the module name. It allows you to specify a chip variant, e.g.
"saa7114" or "saa7115". In general though the i2c driver autodetects this.
The use of chipid is something that needs to be looked at more closely at a
later date. It differs between i2c drivers and as such can be confusing.
To see which chip variants are supported you can look in the i2c driver code
for the i2c_device_id table. This lists all the possibilities.
struct video_device
-------------------
@ -396,6 +436,15 @@ You should also set these fields:
- ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance
(highly recommended to use this and it might become compulsory in the
future!), then set this to your v4l2_ioctl_ops struct.
- parent: you only set this if v4l2_device was registered with NULL as
the parent device struct. This only happens in cases where one hardware
device has multiple PCI devices that all share the same v4l2_device core.
The cx88 driver is an example of this: one core v4l2_device struct, but
it is used by both an raw video PCI device (cx8800) and a MPEG PCI device
(cx8802). Since the v4l2_device cannot be associated with a particular
PCI device it is setup without a parent device. But when the struct
video_device is setup you do know which parent PCI device to use.
If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or
.ioctl to video_ioctl2 in your v4l2_file_operations struct.
@ -499,8 +548,8 @@ There are a few useful helper functions:
You can set/get driver private data in the video_device struct using:
void *video_get_drvdata(struct video_device *dev);
void video_set_drvdata(struct video_device *dev, void *data);
void *video_get_drvdata(struct video_device *vdev);
void video_set_drvdata(struct video_device *vdev, void *data);
Note that you can safely call video_set_drvdata() before calling
video_register_device().
@ -519,3 +568,103 @@ void *video_drvdata(struct file *file);
You can go from a video_device struct to the v4l2_device struct using:
struct v4l2_device *v4l2_dev = vdev->v4l2_dev;
video buffer helper functions
-----------------------------
The v4l2 core API provides a standard method for dealing with video
buffers. Those methods allow a driver to implement read(), mmap() and
overlay() on a consistent way.
There are currently methods for using video buffers on devices that
supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
linear access (videobuf-dma-contig), and vmalloced buffers, mostly
used on USB drivers (videobuf-vmalloc).
Any driver using videobuf should provide operations (callbacks) for
four handlers:
ops->buf_setup - calculates the size of the video buffers and avoid they
to waste more than some maximum limit of RAM;
ops->buf_prepare - fills the video buffer structs and calls
videobuf_iolock() to alloc and prepare mmaped memory;
ops->buf_queue - advices the driver that another buffer were
requested (by read() or by QBUF);
ops->buf_release - frees any buffer that were allocated.
In order to use it, the driver need to have a code (generally called at
interrupt context) that will properly handle the buffer request lists,
announcing that a new buffer were filled.
The irq handling code should handle the videobuf task lists, in order
to advice videobuf that a new frame were filled, in order to honor to a
request. The code is generally like this one:
if (list_empty(&dma_q->active))
return;
buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
if (!waitqueue_active(&buf->vb.done))
return;
/* Some logic to handle the buf may be needed here */
list_del(&buf->vb.queue);
do_gettimeofday(&buf->vb.ts);
wake_up(&buf->vb.done);
Those are the videobuffer functions used on drivers, implemented on
videobuf-core:
- Videobuf init functions
videobuf_queue_sg_init()
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on drivers that uses DMA
Scatter/Gather buffers.
videobuf_queue_dma_contig_init
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on drivers that need DMA
contiguous buffers.
videobuf_queue_vmalloc_init()
Initializes the videobuf infrastructure. This function should be
called before any other videobuf function on USB (and other drivers)
that need a vmalloced type of videobuf.
- videobuf_iolock()
Prepares the videobuf memory for the proper method (read, mmap, overlay).
- videobuf_queue_is_busy()
Checks if a videobuf is streaming.
- videobuf_queue_cancel()
Stops video handling.
- videobuf_mmap_free()
frees mmap buffers.
- videobuf_stop()
Stops video handling, ends mmap and frees mmap and other buffers.
- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
videobuf_cgmbuf()
This function is used to provide backward compatibility with V4L1
API.
- Some help functions for read()/poll() operations:
videobuf_read_stream()
For continuous stream read()
videobuf_read_one()
For snapshot read()
videobuf_poll_stream()
polling help function
The better way to understand it is to take a look at vivi driver. One
of the main reasons for vivi is to be a videobuf usage example. the
vivi_thread_tick() does the task that the IRQ callback would do on PCI
drivers (or the irq callback on USB).

View File

@ -105,8 +105,8 @@ int main(int argc, char ** argv)
struct video_picture vpic;
unsigned char *buffer, *src;
int bpp = 24, r, g, b;
unsigned int i, src_depth;
int bpp = 24, r = 0, g = 0, b = 0;
unsigned int i, src_depth = 16;
if (fd < 0) {
perror(VIDEO_DEV);

View File

@ -65,3 +65,4 @@ Vendor Product Distributor Model
0x06d6 0x003b Trust Powerc@m 970Z
0x0a17 0x004e Pentax Optio 50
0x041e 0x405d Creative DiVi CAM 516
0x08ca 0x2102 Aiptek DV T300

View File

@ -0,0 +1,101 @@
Mini-HOWTO for using the earlyprintk=dbgp boot option with a
USB2 Debug port key and a debug cable, on x86 systems.
You need two computers, the 'USB debug key' special gadget and
and two USB cables, connected like this:
[host/target] <-------> [USB debug key] <-------> [client/console]
1. There are three specific hardware requirements:
a.) Host/target system needs to have USB debug port capability.
You can check this capability by looking at a 'Debug port' bit in
the lspci -vvv output:
# lspci -vvv
...
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo ThinkPad T61
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=00a0
^^^^^^^^^^^ <==================== [ HERE ]
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
...
( If your system does not list a debug port capability then you probably
wont be able to use the USB debug key. )
b.) You also need a Netchip USB debug cable/key:
http://www.plxtech.com/products/NET2000/NET20DC/default.asp
This is a small blue plastic connector with two USB connections,
it draws power from its USB connections.
c.) Thirdly, you need a second client/console system with a regular USB port.
2. Software requirements:
a.) On the host/target system:
You need to enable the following kernel config option:
CONFIG_EARLY_PRINTK_DBGP=y
And you need to add the boot command line: "earlyprintk=dbgp".
(If you are using Grub, append it to the 'kernel' line in
/etc/grub.conf)
NOTE: normally earlyprintk console gets turned off once the
regular console is alive - use "earlyprintk=dbgp,keep" to keep
this channel open beyond early bootup. This can be useful for
debugging crashes under Xorg, etc.
b.) On the client/console system:
You should enable the following kernel config option:
CONFIG_USB_SERIAL_DEBUG=y
On the next bootup with the modified kernel you should
get a /dev/ttyUSBx device(s).
Now this channel of kernel messages is ready to be used: start
your favorite terminal emulator (minicom, etc.) and set
it up to use /dev/ttyUSB0 - or use a raw 'cat /dev/ttyUSBx' to
see the raw output.
c.) On Nvidia Southbridge based systems: the kernel will try to probe
and find out which port has debug device connected.
3. Testing that it works fine:
You can test the output by using earlyprintk=dbgp,keep and provoking
kernel messages on the host/target system. You can provoke a harmless
kernel message by for example doing:
echo h > /proc/sysrq-trigger
On the host/target system you should see this help line in "dmesg" output:
SysRq : HELP : loglevel(0-9) reBoot Crashdump terminate-all-tasks(E) memory-full-oom-kill(F) kill-all-tasks(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W) dump-ftrace-buffer(Z)
On the client/console system do:
cat /dev/ttyUSB0
And you should see the help line above displayed shortly after you've
provoked it on the host system.
If it does not work then please ask about it on the linux-kernel@vger.kernel.org
mailing list or contact the x86 maintainers.

View File

@ -357,6 +357,7 @@ S: Odd Fixes for 2.4; Maintained for 2.6.
P: Ivan Kokshaysky
M: ink@jurassic.park.msu.ru
S: Maintained for 2.4; PCI support for 2.6.
L: linux-alpha@vger.kernel.org
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
@ -1063,7 +1064,6 @@ BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
L: linux-media@vger.kernel.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
@ -2202,25 +2202,12 @@ L: linux-ide@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
S: Maintained
IDE/ATAPI CDROM DRIVER
IDE/ATAPI DRIVERS
P: Borislav Petkov
M: petkovbb@gmail.com
L: linux-ide@vger.kernel.org
S: Maintained
IDE/ATAPI FLOPPY DRIVERS
P: Paul Bristow
M: Paul Bristow <paul@paulbristow.net>
W: http://paulbristow.net/linux/idefloppy.html
L: linux-kernel@vger.kernel.org
S: Maintained
IDE/ATAPI TAPE DRIVERS
P: Gadi Oxman
M: Gadi Oxman <gadio@netvision.net.il>
L: linux-kernel@vger.kernel.org
S: Maintained
IDLE-I7300
P: Andy Henroid
M: andrew.d.henroid@intel.com
@ -4835,7 +4822,6 @@ VIDEO FOR LINUX (V4L)
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
L: linux-media@vger.kernel.org
L: video4linux-list@redhat.com
W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained

View File

@ -106,3 +106,5 @@ config HAVE_CLK
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_DMA_API_DEBUG
bool

View File

@ -80,7 +80,7 @@ struct alpha_machine_vector
void (*update_irq_hw)(unsigned long, unsigned long, int);
void (*ack_irq)(unsigned long);
void (*device_interrupt)(unsigned long vector);
void (*machine_check)(u64 vector, u64 la);
void (*machine_check)(unsigned long vector, unsigned long la);
void (*smp_callin)(void);
void (*init_arch)(void);

View File

@ -273,4 +273,18 @@ struct pci_dev *alpha_gendev_to_pci(struct device *dev);
extern struct pci_dev *isa_bridge;
extern int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val,
size_t count);
extern int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val,
size_t count);
extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state);
extern void pci_adjust_legacy_attr(struct pci_bus *bus,
enum pci_mmap_state mmap_type);
#define HAVE_PCI_LEGACY 1
extern int pci_create_resource_files(struct pci_dev *dev);
extern void pci_remove_resource_files(struct pci_dev *dev);
#endif /* __ALPHA_PCI_H */

View File

@ -309,519 +309,72 @@ extern int __min_ipl;
#define tbia() __tbi(-2, /* no second argument */)
/*
* Atomic exchange.
* Since it can be used to implement critical sections
* it must clobber "memory" (also for interrupts in UP).
* Atomic exchange routines.
*/
static inline unsigned long
__xchg_u8(volatile char *m, unsigned long val)
{
unsigned long ret, tmp, addr64;
#define __ASM__MB
#define ____xchg(type, args...) __xchg ## type ## _local(args)
#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args)
#include <asm/xchg.h>
__asm__ __volatile__(
" andnot %4,7,%3\n"
" insbl %1,%4,%1\n"
"1: ldq_l %2,0(%3)\n"
" extbl %2,%4,%0\n"
" mskbl %2,%4,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%3)\n"
" beq %2,2f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
: "r" ((long)m), "1" (val) : "memory");
return ret;
}
static inline unsigned long
__xchg_u16(volatile short *m, unsigned long val)
{
unsigned long ret, tmp, addr64;
__asm__ __volatile__(
" andnot %4,7,%3\n"
" inswl %1,%4,%1\n"
"1: ldq_l %2,0(%3)\n"
" extwl %2,%4,%0\n"
" mskwl %2,%4,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%3)\n"
" beq %2,2f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
: "r" ((long)m), "1" (val) : "memory");
return ret;
}
static inline unsigned long
__xchg_u32(volatile int *m, unsigned long val)
{
unsigned long dummy;
__asm__ __volatile__(
"1: ldl_l %0,%4\n"
" bis $31,%3,%1\n"
" stl_c %1,%2\n"
" beq %1,2f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (val), "=&r" (dummy), "=m" (*m)
: "rI" (val), "m" (*m) : "memory");
return val;
}
static inline unsigned long
__xchg_u64(volatile long *m, unsigned long val)
{
unsigned long dummy;
__asm__ __volatile__(
"1: ldq_l %0,%4\n"
" bis $31,%3,%1\n"
" stq_c %1,%2\n"
" beq %1,2f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (val), "=&r" (dummy), "=m" (*m)
: "rI" (val), "m" (*m) : "memory");
return val;
}
/* This function doesn't exist, so you'll get a linker error
if something tries to do an invalid xchg(). */
extern void __xchg_called_with_bad_pointer(void);
#define __xchg(ptr, x, size) \
({ \
unsigned long __xchg__res; \
volatile void *__xchg__ptr = (ptr); \
switch (size) { \
case 1: __xchg__res = __xchg_u8(__xchg__ptr, x); break; \
case 2: __xchg__res = __xchg_u16(__xchg__ptr, x); break; \
case 4: __xchg__res = __xchg_u32(__xchg__ptr, x); break; \
case 8: __xchg__res = __xchg_u64(__xchg__ptr, x); break; \
default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
} \
__xchg__res; \
})
#define xchg(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
#define xchg_local(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
static inline unsigned long
__xchg_u8_local(volatile char *m, unsigned long val)
{
unsigned long ret, tmp, addr64;
__asm__ __volatile__(
" andnot %4,7,%3\n"
" insbl %1,%4,%1\n"
"1: ldq_l %2,0(%3)\n"
" extbl %2,%4,%0\n"
" mskbl %2,%4,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%3)\n"
" beq %2,2f\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
: "r" ((long)m), "1" (val) : "memory");
return ret;
}
static inline unsigned long
__xchg_u16_local(volatile short *m, unsigned long val)
{
unsigned long ret, tmp, addr64;
__asm__ __volatile__(
" andnot %4,7,%3\n"
" inswl %1,%4,%1\n"
"1: ldq_l %2,0(%3)\n"
" extwl %2,%4,%0\n"
" mskwl %2,%4,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%3)\n"
" beq %2,2f\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
: "r" ((long)m), "1" (val) : "memory");
return ret;
}
static inline unsigned long
__xchg_u32_local(volatile int *m, unsigned long val)
{
unsigned long dummy;
__asm__ __volatile__(
"1: ldl_l %0,%4\n"
" bis $31,%3,%1\n"
" stl_c %1,%2\n"
" beq %1,2f\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (val), "=&r" (dummy), "=m" (*m)
: "rI" (val), "m" (*m) : "memory");
return val;
}
static inline unsigned long
__xchg_u64_local(volatile long *m, unsigned long val)
{
unsigned long dummy;
__asm__ __volatile__(
"1: ldq_l %0,%4\n"
" bis $31,%3,%1\n"
" stq_c %1,%2\n"
" beq %1,2f\n"
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (val), "=&r" (dummy), "=m" (*m)
: "rI" (val), "m" (*m) : "memory");
return val;
}
#define __xchg_local(ptr, x, size) \
({ \
unsigned long __xchg__res; \
volatile void *__xchg__ptr = (ptr); \
switch (size) { \
case 1: __xchg__res = __xchg_u8_local(__xchg__ptr, x); break; \
case 2: __xchg__res = __xchg_u16_local(__xchg__ptr, x); break; \
case 4: __xchg__res = __xchg_u32_local(__xchg__ptr, x); break; \
case 8: __xchg__res = __xchg_u64_local(__xchg__ptr, x); break; \
default: __xchg_called_with_bad_pointer(); __xchg__res = x; \
} \
__xchg__res; \
})
#define xchg_local(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, \
sizeof(*(ptr))); \
})
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*
* The memory barrier should be placed in SMP only when we actually
* make the change. If we don't change anything (so if the returned
* prev is equal to old) then we aren't acquiring anything new and
* we don't need any memory barrier as far I can tell.
*/
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#ifdef CONFIG_SMP
#undef __ASM__MB
#define __ASM__MB "\tmb\n"
#endif
#undef ____xchg
#undef ____cmpxchg
#define ____xchg(type, args...) __xchg ##type(args)
#define ____cmpxchg(type, args...) __cmpxchg ##type(args)
#include <asm/xchg.h>
#define xchg(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr)));\
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
static inline unsigned long
__cmpxchg_u8(volatile char *m, long old, long new)
{
unsigned long prev, tmp, cmp, addr64;
__asm__ __volatile__(
" andnot %5,7,%4\n"
" insbl %1,%5,%1\n"
"1: ldq_l %2,0(%4)\n"
" extbl %2,%5,%0\n"
" cmpeq %0,%6,%3\n"
" beq %3,2f\n"
" mskbl %2,%5,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%4)\n"
" beq %2,3f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
return prev;
}
static inline unsigned long
__cmpxchg_u16(volatile short *m, long old, long new)
{
unsigned long prev, tmp, cmp, addr64;
__asm__ __volatile__(
" andnot %5,7,%4\n"
" inswl %1,%5,%1\n"
"1: ldq_l %2,0(%4)\n"
" extwl %2,%5,%0\n"
" cmpeq %0,%6,%3\n"
" beq %3,2f\n"
" mskwl %2,%5,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%4)\n"
" beq %2,3f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
return prev;
}
static inline unsigned long
__cmpxchg_u32(volatile int *m, int old, int new)
{
unsigned long prev, cmp;
__asm__ __volatile__(
"1: ldl_l %0,%5\n"
" cmpeq %0,%3,%1\n"
" beq %1,2f\n"
" mov %4,%1\n"
" stl_c %1,%2\n"
" beq %1,3f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r"(prev), "=&r"(cmp), "=m"(*m)
: "r"((long) old), "r"(new), "m"(*m) : "memory");
return prev;
}
static inline unsigned long
__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
{
unsigned long prev, cmp;
__asm__ __volatile__(
"1: ldq_l %0,%5\n"
" cmpeq %0,%3,%1\n"
" beq %1,2f\n"
" mov %4,%1\n"
" stq_c %1,%2\n"
" beq %1,3f\n"
#ifdef CONFIG_SMP
" mb\n"
#endif
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r"(prev), "=&r"(cmp), "=m"(*m)
: "r"((long) old), "r"(new), "m"(*m) : "memory");
return prev;
}
/* This function doesn't exist, so you'll get a linker error
if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
static __always_inline unsigned long
__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
{
switch (size) {
case 1:
return __cmpxchg_u8(ptr, old, new);
case 2:
return __cmpxchg_u16(ptr, old, new);
case 4:
return __cmpxchg_u32(ptr, old, new);
case 8:
return __cmpxchg_u64(ptr, old, new);
}
__cmpxchg_called_with_bad_pointer();
return old;
}
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr))); \
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
static inline unsigned long
__cmpxchg_u8_local(volatile char *m, long old, long new)
{
unsigned long prev, tmp, cmp, addr64;
__asm__ __volatile__(
" andnot %5,7,%4\n"
" insbl %1,%5,%1\n"
"1: ldq_l %2,0(%4)\n"
" extbl %2,%5,%0\n"
" cmpeq %0,%6,%3\n"
" beq %3,2f\n"
" mskbl %2,%5,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%4)\n"
" beq %2,3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
return prev;
}
static inline unsigned long
__cmpxchg_u16_local(volatile short *m, long old, long new)
{
unsigned long prev, tmp, cmp, addr64;
__asm__ __volatile__(
" andnot %5,7,%4\n"
" inswl %1,%5,%1\n"
"1: ldq_l %2,0(%4)\n"
" extwl %2,%5,%0\n"
" cmpeq %0,%6,%3\n"
" beq %3,2f\n"
" mskwl %2,%5,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%4)\n"
" beq %2,3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
return prev;
}
static inline unsigned long
__cmpxchg_u32_local(volatile int *m, int old, int new)
{
unsigned long prev, cmp;
__asm__ __volatile__(
"1: ldl_l %0,%5\n"
" cmpeq %0,%3,%1\n"
" beq %1,2f\n"
" mov %4,%1\n"
" stl_c %1,%2\n"
" beq %1,3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r"(prev), "=&r"(cmp), "=m"(*m)
: "r"((long) old), "r"(new), "m"(*m) : "memory");
return prev;
}
static inline unsigned long
__cmpxchg_u64_local(volatile long *m, unsigned long old, unsigned long new)
{
unsigned long prev, cmp;
__asm__ __volatile__(
"1: ldq_l %0,%5\n"
" cmpeq %0,%3,%1\n"
" beq %1,2f\n"
" mov %4,%1\n"
" stq_c %1,%2\n"
" beq %1,3f\n"
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r"(prev), "=&r"(cmp), "=m"(*m)
: "r"((long) old), "r"(new), "m"(*m) : "memory");
return prev;
}
static __always_inline unsigned long
__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
int size)
{
switch (size) {
case 1:
return __cmpxchg_u8_local(ptr, old, new);
case 2:
return __cmpxchg_u16_local(ptr, old, new);
case 4:
return __cmpxchg_u32_local(ptr, old, new);
case 8:
return __cmpxchg_u64_local(ptr, old, new);
}
__cmpxchg_called_with_bad_pointer();
return old;
}
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)

View File

@ -8,7 +8,12 @@
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
#ifdef __KERNEL__
#include <asm-generic/int-ll64.h>
#else
#include <asm-generic/int-l64.h>
#endif
#ifndef __ASSEMBLY__

View File

@ -498,13 +498,13 @@ struct exception_table_entry
};
/* Returns the new pc */
#define fixup_exception(map_reg, fixup, pc) \
#define fixup_exception(map_reg, _fixup, pc) \
({ \
if ((fixup)->fixup.bits.valreg != 31) \
map_reg((fixup)->fixup.bits.valreg) = 0; \
if ((fixup)->fixup.bits.errreg != 31) \
map_reg((fixup)->fixup.bits.errreg) = -EFAULT; \
(pc) + (fixup)->fixup.bits.nextinsn; \
if ((_fixup)->fixup.bits.valreg != 31) \
map_reg((_fixup)->fixup.bits.valreg) = 0; \
if ((_fixup)->fixup.bits.errreg != 31) \
map_reg((_fixup)->fixup.bits.errreg) = -EFAULT; \
(pc) + (_fixup)->fixup.bits.nextinsn; \
})

View File

@ -0,0 +1,258 @@
#ifndef __ALPHA_SYSTEM_H
#error Do not include xchg.h directly!
#else
/*
* xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
* except that local version do not have the expensive memory barrier.
* So this file is included twice from asm/system.h.
*/
/*
* Atomic exchange.
* Since it can be used to implement critical sections
* it must clobber "memory" (also for interrupts in UP).
*/
static inline unsigned long
____xchg(_u8, volatile char *m, unsigned long val)
{
unsigned long ret, tmp, addr64;
__asm__ __volatile__(
" andnot %4,7,%3\n"
" insbl %1,%4,%1\n"
"1: ldq_l %2,0(%3)\n"
" extbl %2,%4,%0\n"
" mskbl %2,%4,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%3)\n"
" beq %2,2f\n"
__ASM__MB
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
: "r" ((long)m), "1" (val) : "memory");
return ret;
}
static inline unsigned long
____xchg(_u16, volatile short *m, unsigned long val)
{
unsigned long ret, tmp, addr64;
__asm__ __volatile__(
" andnot %4,7,%3\n"
" inswl %1,%4,%1\n"
"1: ldq_l %2,0(%3)\n"
" extwl %2,%4,%0\n"
" mskwl %2,%4,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%3)\n"
" beq %2,2f\n"
__ASM__MB
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
: "r" ((long)m), "1" (val) : "memory");
return ret;
}
static inline unsigned long
____xchg(_u32, volatile int *m, unsigned long val)
{
unsigned long dummy;
__asm__ __volatile__(
"1: ldl_l %0,%4\n"
" bis $31,%3,%1\n"
" stl_c %1,%2\n"
" beq %1,2f\n"
__ASM__MB
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (val), "=&r" (dummy), "=m" (*m)
: "rI" (val), "m" (*m) : "memory");
return val;
}
static inline unsigned long
____xchg(_u64, volatile long *m, unsigned long val)
{
unsigned long dummy;
__asm__ __volatile__(
"1: ldq_l %0,%4\n"
" bis $31,%3,%1\n"
" stq_c %1,%2\n"
" beq %1,2f\n"
__ASM__MB
".subsection 2\n"
"2: br 1b\n"
".previous"
: "=&r" (val), "=&r" (dummy), "=m" (*m)
: "rI" (val), "m" (*m) : "memory");
return val;
}
/* This function doesn't exist, so you'll get a linker error
if something tries to do an invalid xchg(). */
extern void __xchg_called_with_bad_pointer(void);
static __always_inline unsigned long
____xchg(, volatile void *ptr, unsigned long x, int size)
{
switch (size) {
case 1:
return ____xchg(_u8, ptr, x);
case 2:
return ____xchg(_u16, ptr, x);
case 4:
return ____xchg(_u32, ptr, x);
case 8:
return ____xchg(_u64, ptr, x);
}
__xchg_called_with_bad_pointer();
return x;
}
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*
* The memory barrier should be placed in SMP only when we actually
* make the change. If we don't change anything (so if the returned
* prev is equal to old) then we aren't acquiring anything new and
* we don't need any memory barrier as far I can tell.
*/
static inline unsigned long
____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
{
unsigned long prev, tmp, cmp, addr64;
__asm__ __volatile__(
" andnot %5,7,%4\n"
" insbl %1,%5,%1\n"
"1: ldq_l %2,0(%4)\n"
" extbl %2,%5,%0\n"
" cmpeq %0,%6,%3\n"
" beq %3,2f\n"
" mskbl %2,%5,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%4)\n"
" beq %2,3f\n"
__ASM__MB
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
return prev;
}
static inline unsigned long
____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
{
unsigned long prev, tmp, cmp, addr64;
__asm__ __volatile__(
" andnot %5,7,%4\n"
" inswl %1,%5,%1\n"
"1: ldq_l %2,0(%4)\n"
" extwl %2,%5,%0\n"
" cmpeq %0,%6,%3\n"
" beq %3,2f\n"
" mskwl %2,%5,%2\n"
" or %1,%2,%2\n"
" stq_c %2,0(%4)\n"
" beq %2,3f\n"
__ASM__MB
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
return prev;
}
static inline unsigned long
____cmpxchg(_u32, volatile int *m, int old, int new)
{
unsigned long prev, cmp;
__asm__ __volatile__(
"1: ldl_l %0,%5\n"
" cmpeq %0,%3,%1\n"
" beq %1,2f\n"
" mov %4,%1\n"
" stl_c %1,%2\n"
" beq %1,3f\n"
__ASM__MB
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r"(prev), "=&r"(cmp), "=m"(*m)
: "r"((long) old), "r"(new), "m"(*m) : "memory");
return prev;
}
static inline unsigned long
____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
{
unsigned long prev, cmp;
__asm__ __volatile__(
"1: ldq_l %0,%5\n"
" cmpeq %0,%3,%1\n"
" beq %1,2f\n"
" mov %4,%1\n"
" stq_c %1,%2\n"
" beq %1,3f\n"
__ASM__MB
"2:\n"
".subsection 2\n"
"3: br 1b\n"
".previous"
: "=&r"(prev), "=&r"(cmp), "=m"(*m)
: "r"((long) old), "r"(new), "m"(*m) : "memory");
return prev;
}
/* This function doesn't exist, so you'll get a linker error
if something tries to do an invalid cmpxchg(). */
extern void __cmpxchg_called_with_bad_pointer(void);
static __always_inline unsigned long
____cmpxchg(, volatile void *ptr, unsigned long old, unsigned long new,
int size)
{
switch (size) {
case 1:
return ____cmpxchg(_u8, ptr, old, new);
case 2:
return ____cmpxchg(_u16, ptr, old, new);
case 4:
return ____cmpxchg(_u32, ptr, old, new);
case 8:
return ____cmpxchg(_u64, ptr, old, new);
}
__cmpxchg_called_with_bad_pointer();
return old;
}
#endif

View File

@ -12,7 +12,7 @@ obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PCI) += pci.o pci_iommu.o
obj-$(CONFIG_PCI) += pci.o pci_iommu.o pci-sysfs.o
obj-$(CONFIG_SRM_ENV) += srm_env.o
obj-$(CONFIG_MODULES) += module.o

View File

@ -157,8 +157,8 @@ ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn,
err_print_prefix,
streamname[stream], bitsname[bits], sourcename[source]);
printk("%s Address: 0x%016lx\n"
" Syndrome[upper.lower]: %02lx.%02lx\n",
printk("%s Address: 0x%016llx\n"
" Syndrome[upper.lower]: %02llx.%02llx\n",
err_print_prefix,
c_addr,
c2_syn, c1_syn);

View File

@ -246,13 +246,13 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
printk("%s*** MCHK occurred on LPID %ld (RBOX %lx)\n",
printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);
el_print_timestamp(&packet->by_type.logout.timestamp);
printk("%s EXC_ADDR: %016lx\n"
" HALT_CODE: %lx\n",
printk("%s EXC_ADDR: %016llx\n"
" HALT_CODE: %llx\n",
err_print_prefix,
packet->by_type.logout.exc_addr,
packet->by_type.logout.halt_code);

View File

@ -129,7 +129,7 @@ marvel_print_po7_crrct_sym(u64 crrct_sym)
printk("%s Correctable Error Symptoms:\n"
"%s Syndrome: 0x%lx\n",
"%s Syndrome: 0x%llx\n",
err_print_prefix,
err_print_prefix, EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__SYN));
marvel_print_err_cyc(EXTRACT(crrct_sym, IO7__PO7_CRRCT_SYM__ERR_CYC));
@ -186,7 +186,7 @@ marvel_print_po7_uncrr_sym(u64 uncrr_sym, u64 valid_mask)
uncrr_sym &= valid_mask;
if (EXTRACT(valid_mask, IO7__PO7_UNCRR_SYM__SYN))
printk("%s Syndrome: 0x%lx\n",
printk("%s Syndrome: 0x%llx\n",
err_print_prefix,
EXTRACT(uncrr_sym, IO7__PO7_UNCRR_SYM__SYN));
@ -307,7 +307,7 @@ marvel_print_po7_ugbge_sym(u64 ugbge_sym)
sprintf(opcode_str, "BlkIO");
break;
default:
sprintf(opcode_str, "0x%lx\n",
sprintf(opcode_str, "0x%llx\n",
EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE));
break;
}
@ -321,7 +321,7 @@ marvel_print_po7_ugbge_sym(u64 ugbge_sym)
opcode_str);
if (0xC5 != EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_OPCODE))
printk("%s Packet Offset 0x%08lx\n",
printk("%s Packet Offset 0x%08llx\n",
err_print_prefix,
EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_PKT_OFF));
}
@ -480,8 +480,8 @@ marvel_print_po7_err_sum(struct ev7_pal_io_subpacket *io)
printk("%s Lost Error\n", err_print_prefix);
printk("%s Failing Packet:\n"
"%s Cycle 1: %016lx\n"
"%s Cycle 2: %016lx\n",
"%s Cycle 1: %016llx\n"
"%s Cycle 2: %016llx\n",
err_print_prefix,
err_print_prefix, io->po7_err_pkt0,
err_print_prefix, io->po7_err_pkt1);
@ -515,9 +515,9 @@ marvel_print_pox_tlb_err(u64 tlb_err)
if (!(tlb_err & IO7__POX_TLBERR__ERR_VALID))
return;
printk("%s TLB Error on index 0x%lx:\n"
printk("%s TLB Error on index 0x%llx:\n"
"%s - %s\n"
"%s - Addr: 0x%016lx\n",
"%s - Addr: 0x%016llx\n",
err_print_prefix,
EXTRACT(tlb_err, IO7__POX_TLBERR__ERR_TLB_PTR),
err_print_prefix,
@ -579,7 +579,7 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
sprintf(message, "Uncorrectable Split Write Data Error");
break;
default:
sprintf(message, "%08lx\n",
sprintf(message, "%08llx\n",
EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__MESSAGE));
break;
}
@ -620,9 +620,9 @@ marvel_print_pox_trans_sum(u64 trans_sum)
return;
printk("%s Transaction Summary:\n"
"%s Command: 0x%lx - %s\n"
"%s Address: 0x%016lx%s\n"
"%s PCI-X Master Slot: 0x%lx\n",
"%s Command: 0x%llx - %s\n"
"%s Address: 0x%016llx%s\n"
"%s PCI-X Master Slot: 0x%llx\n",
err_print_prefix,
err_print_prefix,
EXTRACT(trans_sum, IO7__POX_TRANSUM__PCIX_CMD),
@ -964,12 +964,12 @@ marvel_process_io_error(struct ev7_lf_subpackets *lf_subpackets, int print)
#if 0
printk("%s PORT 7 ERROR:\n"
"%s PO7_ERROR_SUM: %016lx\n"
"%s PO7_UNCRR_SYM: %016lx\n"
"%s PO7_CRRCT_SYM: %016lx\n"
"%s PO7_UGBGE_SYM: %016lx\n"
"%s PO7_ERR_PKT0: %016lx\n"
"%s PO7_ERR_PKT1: %016lx\n",
"%s PO7_ERROR_SUM: %016llx\n"
"%s PO7_UNCRR_SYM: %016llx\n"
"%s PO7_CRRCT_SYM: %016llx\n"
"%s PO7_UGBGE_SYM: %016llx\n"
"%s PO7_ERR_PKT0: %016llx\n"
"%s PO7_ERR_PKT1: %016llx\n",
err_print_prefix,
err_print_prefix, io->po7_error_sum,
err_print_prefix, io->po7_uncrr_sym,
@ -987,12 +987,12 @@ marvel_process_io_error(struct ev7_lf_subpackets *lf_subpackets, int print)
if (!MARVEL_IO_ERR_VALID(io->ports[i].pox_err_sum))
continue;
printk("%s PID %u PORT %d POx_ERR_SUM: %016lx\n",
printk("%s PID %u PORT %d POx_ERR_SUM: %016llx\n",
err_print_prefix,
lf_subpackets->io_pid, i, io->ports[i].pox_err_sum);
marvel_print_pox_err(io->ports[i].pox_err_sum, &io->ports[i]);
printk("%s [ POx_FIRST_ERR: %016lx ]\n",
printk("%s [ POx_FIRST_ERR: %016llx ]\n",
err_print_prefix, io->ports[i].pox_first_err);
marvel_print_pox_err(io->ports[i].pox_first_err,
&io->ports[i]);

View File

@ -107,12 +107,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
if (!print)
return status;
printk("%s PChip %d SERROR: %016lx\n",
printk("%s PChip %d SERROR: %016llx\n",
err_print_prefix, which, serror);
if (serror & TITAN__PCHIP_SERROR__ECCMASK) {
printk("%s %sorrectable ECC Error:\n"
" Source: %-6s Command: %-8s Syndrome: 0x%08x\n"
" Address: 0x%lx\n",
" Address: 0x%llx\n",
err_print_prefix,
(serror & TITAN__PCHIP_SERROR__UECC) ? "Unc" : "C",
serror_src[EXTRACT(serror, TITAN__PCHIP_SERROR__SRC)],
@ -223,7 +223,7 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
if (!print)
return status;
printk("%s PChip %d %cPERROR: %016lx\n",
printk("%s PChip %d %cPERROR: %016llx\n",
err_print_prefix, which,
port ? 'A' : 'G', perror);
if (perror & TITAN__PCHIP_PERROR__IPTPW)
@ -316,7 +316,7 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
addr = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__ADDR) << 3;
len = EXTRACT(agperror, TITAN__PCHIP_AGPERROR__LEN);
printk("%s PChip %d AGPERROR: %016lx\n", err_print_prefix,
printk("%s PChip %d AGPERROR: %016llx\n", err_print_prefix,
which, agperror);
if (agperror & TITAN__PCHIP_AGPERROR__NOWINDOW)
printk("%s No Window\n", err_print_prefix);
@ -597,16 +597,16 @@ privateer_process_680_frame(struct el_common *mchk_header, int print)
return status;
/* TODO - decode instead of just dumping... */
printk("%s Summary Flags: %016lx\n"
" CChip DIRx: %016lx\n"
" System Management IR: %016lx\n"
" CPU IR: %016lx\n"
" Power Supply IR: %016lx\n"
" LM78 Fault Status: %016lx\n"
" System Doors: %016lx\n"
" Temperature Warning: %016lx\n"
" Fan Control: %016lx\n"
" Fatal Power Down Code: %016lx\n",
printk("%s Summary Flags: %016llx\n"
" CChip DIRx: %016llx\n"
" System Management IR: %016llx\n"
" CPU IR: %016llx\n"
" Power Supply IR: %016llx\n"
" LM78 Fault Status: %016llx\n"
" System Doors: %016llx\n"
" Temperature Warning: %016llx\n"
" Fan Control: %016llx\n"
" Fatal Power Down Code: %016llx\n",
err_print_prefix,
emchk->summary,
emchk->c_dirx,

View File

@ -0,0 +1,366 @@
/*
* arch/alpha/kernel/pci-sysfs.c
*
* Copyright (C) 2009 Ivan Kokshaysky
*
* Alpha PCI resource files.
*
* Loosely based on generic HAVE_PCI_MMAP implementation in
* drivers/pci/pci-sysfs.c
*/
#include <linux/sched.h>
#include <linux/pci.h>
static int hose_mmap_page_range(struct pci_controller *hose,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_type, int sparse)
{
unsigned long base;
if (mmap_type == pci_mmap_mem)
base = sparse ? hose->sparse_mem_base : hose->dense_mem_base;
else
base = sparse ? hose->sparse_io_base : hose->dense_io_base;
vma->vm_pgoff += base >> PAGE_SHIFT;
vma->vm_flags |= (VM_IO | VM_RESERVED);
return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
}
static int __pci_mmap_fits(struct pci_dev *pdev, int num,
struct vm_area_struct *vma, int sparse)
{
unsigned long nr, start, size;
int shift = sparse ? 5 : 0;
nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
start = vma->vm_pgoff;
size = ((pci_resource_len(pdev, num) - 1) >> (PAGE_SHIFT - shift)) + 1;
if (start < size && size - start >= nr)
return 1;
WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on %s BAR %d "
"(size 0x%08lx)\n",
current->comm, sparse ? " sparse" : "", start, start + nr,
pci_name(pdev), num, size);
return 0;
}
/**
* pci_mmap_resource - map a PCI resource into user memory space
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
* @sparse: address space type
*
* Use the bus mapping routines to map a PCI resource into userspace.
*/
static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
struct vm_area_struct *vma, int sparse)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
struct resource *res = (struct resource *)attr->private;
enum pci_mmap_state mmap_type;
struct pci_bus_region bar;
int i;
for (i = 0; i < PCI_ROM_RESOURCE; i++)
if (res == &pdev->resource[i])
break;
if (i >= PCI_ROM_RESOURCE)
return -ENODEV;
if (!__pci_mmap_fits(pdev, i, vma, sparse))
return -EINVAL;
if (iomem_is_exclusive(res->start))
return -EINVAL;
pcibios_resource_to_bus(pdev, &bar, res);
vma->vm_pgoff += bar.start >> (PAGE_SHIFT - (sparse ? 5 : 0));
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
return hose_mmap_page_range(pdev->sysdata, vma, mmap_type, sparse);
}
static int pci_mmap_resource_sparse(struct kobject *kobj,
struct bin_attribute *attr,
struct vm_area_struct *vma)
{
return pci_mmap_resource(kobj, attr, vma, 1);
}
static int pci_mmap_resource_dense(struct kobject *kobj,
struct bin_attribute *attr,
struct vm_area_struct *vma)
{
return pci_mmap_resource(kobj, attr, vma, 0);
}
/**
* pci_remove_resource_files - cleanup resource files
* @dev: dev to cleanup
*
* If we created resource files for @dev, remove them from sysfs and
* free their resources.
*/
void pci_remove_resource_files(struct pci_dev *pdev)
{
int i;
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
struct bin_attribute *res_attr;
res_attr = pdev->res_attr[i];
if (res_attr) {
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
res_attr = pdev->res_attr_wc[i];
if (res_attr) {
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
}
}
static int sparse_mem_mmap_fits(struct pci_dev *pdev, int num)
{
struct pci_bus_region bar;
struct pci_controller *hose = pdev->sysdata;
long dense_offset;
unsigned long sparse_size;
pcibios_resource_to_bus(pdev, &bar, &pdev->resource[num]);
/* All core logic chips have 4G sparse address space, except
CIA which has 16G (see xxx_SPARSE_MEM and xxx_DENSE_MEM
definitions in asm/core_xxx.h files). This corresponds
to 128M or 512M of the bus space. */
dense_offset = (long)(hose->dense_mem_base - hose->sparse_mem_base);
sparse_size = dense_offset >= 0x400000000UL ? 0x20000000 : 0x8000000;
return bar.end < sparse_size;
}
static int pci_create_one_attr(struct pci_dev *pdev, int num, char *name,
char *suffix, struct bin_attribute *res_attr,
unsigned long sparse)
{
size_t size = pci_resource_len(pdev, num);
sprintf(name, "resource%d%s", num, suffix);
res_attr->mmap = sparse ? pci_mmap_resource_sparse :
pci_mmap_resource_dense;
res_attr->attr.name = name;
res_attr->attr.mode = S_IRUSR | S_IWUSR;
res_attr->size = sparse ? size << 5 : size;
res_attr->private = &pdev->resource[num];
return sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
}
static int pci_create_attr(struct pci_dev *pdev, int num)
{
/* allocate attribute structure, piggyback attribute name */
int retval, nlen1, nlen2 = 0, res_count = 1;
unsigned long sparse_base, dense_base;
struct bin_attribute *attr;
struct pci_controller *hose = pdev->sysdata;
char *suffix, *attr_name;
suffix = ""; /* Assume bwx machine, normal resourceN files. */
nlen1 = 10;
if (pdev->resource[num].flags & IORESOURCE_MEM) {
sparse_base = hose->sparse_mem_base;
dense_base = hose->dense_mem_base;
if (sparse_base && !sparse_mem_mmap_fits(pdev, num)) {
sparse_base = 0;
suffix = "_dense";
nlen1 = 16; /* resourceN_dense */
}
} else {
sparse_base = hose->sparse_io_base;
dense_base = hose->dense_io_base;
}
if (sparse_base) {
suffix = "_sparse";
nlen1 = 17;
if (dense_base) {
nlen2 = 16; /* resourceN_dense */
res_count = 2;
}
}
attr = kzalloc(sizeof(*attr) * res_count + nlen1 + nlen2, GFP_ATOMIC);
if (!attr)
return -ENOMEM;
/* Create bwx, sparse or single dense file */
attr_name = (char *)(attr + res_count);
pdev->res_attr[num] = attr;
retval = pci_create_one_attr(pdev, num, attr_name, suffix, attr,
sparse_base);
if (retval || res_count == 1)
return retval;
/* Create dense file */
attr_name += nlen1;
attr++;
pdev->res_attr_wc[num] = attr;
return pci_create_one_attr(pdev, num, attr_name, "_dense", attr, 0);
}
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
*
* Walk the resources in @dev creating files for each resource available.
*/
int pci_create_resource_files(struct pci_dev *pdev)
{
int i;
int retval;
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
retval = pci_create_attr(pdev, i);
if (retval) {
pci_remove_resource_files(pdev);
return retval;
}
}
return 0;
}
/* Legacy I/O bus mapping stuff. */
static int __legacy_mmap_fits(struct pci_controller *hose,
struct vm_area_struct *vma,
unsigned long res_size, int sparse)
{
unsigned long nr, start, size;
nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
start = vma->vm_pgoff;
size = ((res_size - 1) >> PAGE_SHIFT) + 1;
if (start < size && size - start >= nr)
return 1;
WARN(1, "process \"%s\" tried to map%s 0x%08lx-0x%08lx on hose %d "
"(size 0x%08lx)\n",
current->comm, sparse ? " sparse" : "", start, start + nr,
hose->index, size);
return 0;
}
static inline int has_sparse(struct pci_controller *hose,
enum pci_mmap_state mmap_type)
{
unsigned long base;
base = (mmap_type == pci_mmap_mem) ? hose->sparse_mem_base :
hose->sparse_io_base;
return base != 0;
}
int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
enum pci_mmap_state mmap_type)
{
struct pci_controller *hose = bus->sysdata;
int sparse = has_sparse(hose, mmap_type);
unsigned long res_size;
res_size = (mmap_type == pci_mmap_mem) ? bus->legacy_mem->size :
bus->legacy_io->size;
if (!__legacy_mmap_fits(hose, vma, res_size, sparse))
return -EINVAL;
return hose_mmap_page_range(hose, vma, mmap_type, sparse);
}
/**
* pci_adjust_legacy_attr - adjustment of legacy file attributes
* @b: bus to create files under
* @mmap_type: I/O port or memory
*
* Adjust file name and size for sparse mappings.
*/
void pci_adjust_legacy_attr(struct pci_bus *bus, enum pci_mmap_state mmap_type)
{
struct pci_controller *hose = bus->sysdata;
if (!has_sparse(hose, mmap_type))
return;
if (mmap_type == pci_mmap_mem) {
bus->legacy_mem->attr.name = "legacy_mem_sparse";
bus->legacy_mem->size <<= 5;
} else {
bus->legacy_io->attr.name = "legacy_io_sparse";
bus->legacy_io->size <<= 5;
}
return;
}
/* Legacy I/O bus read/write functions */
int pci_legacy_read(struct pci_bus *bus, loff_t port, u32 *val, size_t size)
{
struct pci_controller *hose = bus->sysdata;
port += hose->io_space->start;
switch(size) {
case 1:
*((u8 *)val) = inb(port);
return 1;
case 2:
if (port & 1)
return -EINVAL;
*((u16 *)val) = inw(port);
return 2;
case 4:
if (port & 3)
return -EINVAL;
*((u32 *)val) = inl(port);
return 4;
}
return -EINVAL;
}
int pci_legacy_write(struct pci_bus *bus, loff_t port, u32 val, size_t size)
{
struct pci_controller *hose = bus->sysdata;
port += hose->io_space->start;
switch(size) {
case 1:
outb(port, val);
return 1;
case 2:
if (port & 1)
return -EINVAL;
outw(port, val);
return 2;
case 4:
if (port & 3)
return -EINVAL;
outl(port, val);
return 4;
}
return -EINVAL;
}

View File

@ -168,7 +168,7 @@ pcibios_align_resource(void *data, struct resource *res,
*/
/* Align to multiple of size of minimum base. */
alignto = max(0x1000UL, align);
alignto = max_t(resource_size_t, 0x1000, align);
start = ALIGN(start, alignto);
if (hose->sparse_mem_base && size <= 7 * 16*MB) {
if (((start / (16*MB)) & 0x7) == 0) {

View File

@ -247,7 +247,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
&& paddr + size <= __direct_map_size) {
ret = paddr + __direct_map_base;
DBGA2("pci_map_single: [%p,%lx] -> direct %lx from %p\n",
DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %p\n",
cpu_addr, size, ret, __builtin_return_address(0));
return ret;
@ -258,7 +258,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
if (dac_allowed) {
ret = paddr + alpha_mv.pci_dac_offset;
DBGA2("pci_map_single: [%p,%lx] -> DAC %lx from %p\n",
DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %p\n",
cpu_addr, size, ret, __builtin_return_address(0));
return ret;
@ -299,7 +299,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
ret = arena->dma_base + dma_ofs * PAGE_SIZE;
ret += (unsigned long)cpu_addr & ~PAGE_MASK;
DBGA2("pci_map_single: [%p,%lx] np %ld -> sg %lx from %p\n",
DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %p\n",
cpu_addr, size, npages, ret, __builtin_return_address(0));
return ret;
@ -355,14 +355,14 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
&& dma_addr < __direct_map_base + __direct_map_size) {
/* Nothing to do. */
DBGA2("pci_unmap_single: direct [%lx,%lx] from %p\n",
DBGA2("pci_unmap_single: direct [%llx,%zx] from %p\n",
dma_addr, size, __builtin_return_address(0));
return;
}
if (dma_addr > 0xffffffff) {
DBGA2("pci64_unmap_single: DAC [%lx,%lx] from %p\n",
DBGA2("pci64_unmap_single: DAC [%llx,%zx] from %p\n",
dma_addr, size, __builtin_return_address(0));
return;
}
@ -373,9 +373,9 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
dma_ofs = (dma_addr - arena->dma_base) >> PAGE_SHIFT;
if (dma_ofs * PAGE_SIZE >= arena->size) {
printk(KERN_ERR "Bogus pci_unmap_single: dma_addr %lx "
" base %lx size %x\n", dma_addr, arena->dma_base,
arena->size);
printk(KERN_ERR "Bogus pci_unmap_single: dma_addr %llx "
" base %llx size %x\n",
dma_addr, arena->dma_base, arena->size);
return;
BUG();
}
@ -394,7 +394,7 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
spin_unlock_irqrestore(&arena->lock, flags);
DBGA2("pci_unmap_single: sg [%lx,%lx] np %ld from %p\n",
DBGA2("pci_unmap_single: sg [%llx,%zx] np %ld from %p\n",
dma_addr, size, npages, __builtin_return_address(0));
}
EXPORT_SYMBOL(pci_unmap_single);
@ -444,7 +444,7 @@ try_again:
goto try_again;
}
DBGA2("pci_alloc_consistent: %lx -> [%p,%x] from %p\n",
DBGA2("pci_alloc_consistent: %zx -> [%p,%llx] from %p\n",
size, cpu_addr, *dma_addrp, __builtin_return_address(0));
return cpu_addr;
@ -464,7 +464,7 @@ pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr,
pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
free_pages((unsigned long)cpu_addr, get_order(size));
DBGA2("pci_free_consistent: [%x,%lx] from %p\n",
DBGA2("pci_free_consistent: [%llx,%zx] from %p\n",
dma_addr, size, __builtin_return_address(0));
}
EXPORT_SYMBOL(pci_free_consistent);
@ -551,7 +551,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
out->dma_address = paddr + __direct_map_base;
out->dma_length = size;
DBGA(" sg_fill: [%p,%lx] -> direct %lx\n",
DBGA(" sg_fill: [%p,%lx] -> direct %llx\n",
__va(paddr), size, out->dma_address);
return 0;
@ -563,7 +563,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
out->dma_address = paddr + alpha_mv.pci_dac_offset;
out->dma_length = size;
DBGA(" sg_fill: [%p,%lx] -> DAC %lx\n",
DBGA(" sg_fill: [%p,%lx] -> DAC %llx\n",
__va(paddr), size, out->dma_address);
return 0;
@ -589,7 +589,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
out->dma_address = arena->dma_base + dma_ofs*PAGE_SIZE + paddr;
out->dma_length = size;
DBGA(" sg_fill: [%p,%lx] -> sg %lx np %ld\n",
DBGA(" sg_fill: [%p,%lx] -> sg %llx np %ld\n",
__va(paddr), size, out->dma_address, npages);
/* All virtually contiguous. We need to find the length of each
@ -752,7 +752,7 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
if (addr > 0xffffffff) {
/* It's a DAC address -- nothing to do. */
DBGA(" (%ld) DAC [%lx,%lx]\n",
DBGA(" (%ld) DAC [%llx,%zx]\n",
sg - end + nents, addr, size);
continue;
}
@ -760,12 +760,12 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents,
if (addr >= __direct_map_base
&& addr < __direct_map_base + __direct_map_size) {
/* Nothing to do. */
DBGA(" (%ld) direct [%lx,%lx]\n",
DBGA(" (%ld) direct [%llx,%zx]\n",
sg - end + nents, addr, size);
continue;
}
DBGA(" (%ld) sg [%lx,%lx]\n",
DBGA(" (%ld) sg [%llx,%zx]\n",
sg - end + nents, addr, size);
npages = iommu_num_pages(addr, size, PAGE_SIZE);

View File

@ -20,7 +20,7 @@ struct pci_controller;
extern struct pci_ops apecs_pci_ops;
extern void apecs_init_arch(void);
extern void apecs_pci_clr_err(void);
extern void apecs_machine_check(u64, u64);
extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_cia.c */
@ -29,7 +29,7 @@ extern void cia_init_pci(void);
extern void cia_init_arch(void);
extern void pyxis_init_arch(void);
extern void cia_kill_arch(int);
extern void cia_machine_check(u64, u64);
extern void cia_machine_check(unsigned long vector, unsigned long la_ptr);
extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_irongate.c */
@ -42,7 +42,7 @@ extern void irongate_machine_check(u64, u64);
/* core_lca.c */
extern struct pci_ops lca_pci_ops;
extern void lca_init_arch(void);
extern void lca_machine_check(u64, u64);
extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_marvel.c */
@ -64,7 +64,7 @@ void io7_clear_errors(struct io7 *io7);
extern struct pci_ops mcpcia_pci_ops;
extern void mcpcia_init_arch(void);
extern void mcpcia_init_hoses(void);
extern void mcpcia_machine_check(u64, u64);
extern void mcpcia_machine_check(unsigned long vector, unsigned long la_ptr);
extern void mcpcia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_polaris.c */
@ -72,14 +72,14 @@ extern struct pci_ops polaris_pci_ops;
extern int polaris_read_config_dword(struct pci_dev *, int, u32 *);
extern int polaris_write_config_dword(struct pci_dev *, int, u32);
extern void polaris_init_arch(void);
extern void polaris_machine_check(u64, u64);
extern void polaris_machine_check(unsigned long vector, unsigned long la_ptr);
#define polaris_pci_tbi ((void *)0)
/* core_t2.c */
extern struct pci_ops t2_pci_ops;
extern void t2_init_arch(void);
extern void t2_kill_arch(int);
extern void t2_machine_check(u64, u64);
extern void t2_machine_check(unsigned long vector, unsigned long la_ptr);
extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_titan.c */
@ -94,14 +94,14 @@ extern struct _alpha_agp_info *titan_agp_info(void);
extern struct pci_ops tsunami_pci_ops;
extern void tsunami_init_arch(void);
extern void tsunami_kill_arch(int);
extern void tsunami_machine_check(u64, u64);
extern void tsunami_machine_check(unsigned long vector, unsigned long la_ptr);
extern void tsunami_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_wildfire.c */
extern struct pci_ops wildfire_pci_ops;
extern void wildfire_init_arch(void);
extern void wildfire_kill_arch(int);
extern void wildfire_machine_check(u64, u64);
extern void wildfire_machine_check(unsigned long vector, unsigned long la_ptr);
extern void wildfire_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int wildfire_pa_to_nid(unsigned long);
extern int wildfire_cpuid_to_nid(int);

View File

@ -1255,7 +1255,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
platform_string(), nr_processors);
#ifdef CONFIG_SMP
seq_printf(f, "cpus active\t\t: %d\n"
seq_printf(f, "cpus active\t\t: %u\n"
"cpu active mask\t\t: %016lx\n",
num_online_cpus(), cpus_addr(cpu_possible_map)[0]);
#endif

View File

@ -2542,8 +2542,8 @@ void __init SMC669_Init ( int index )
SMC37c669_display_device_info( );
#endif
local_irq_restore(flags);
printk( "SMC37c669 Super I/O Controller found @ 0x%lx\n",
(unsigned long) SMC_base );
printk( "SMC37c669 Super I/O Controller found @ 0x%p\n",
SMC_base );
}
else {
local_irq_restore(flags);

View File

@ -218,7 +218,6 @@ srm_env_init(void)
BASE_DIR);
goto cleanup;
}
base_dir->owner = THIS_MODULE;
/*
* Create per-name subdirectory
@ -229,7 +228,6 @@ srm_env_init(void)
BASE_DIR, NAMED_DIR);
goto cleanup;
}
named_dir->owner = THIS_MODULE;
/*
* Create per-number subdirectory
@ -241,7 +239,6 @@ srm_env_init(void)
goto cleanup;
}
numbered_dir->owner = THIS_MODULE;
/*
* Create all named nodes
@ -254,7 +251,6 @@ srm_env_init(void)
goto cleanup;
entry->proc_entry->data = (void *) entry;
entry->proc_entry->owner = THIS_MODULE;
entry->proc_entry->read_proc = srm_env_read;
entry->proc_entry->write_proc = srm_env_write;
@ -275,7 +271,6 @@ srm_env_init(void)
entry->id = var_num;
entry->proc_entry->data = (void *) entry;
entry->proc_entry->owner = THIS_MODULE;
entry->proc_entry->read_proc = srm_env_read;
entry->proc_entry->write_proc = srm_env_write;
}

View File

@ -244,12 +244,11 @@ jensen_init_arch(void)
}
static void
jensen_machine_check (u64 vector, u64 la)
jensen_machine_check(unsigned long vector, unsigned long la)
{
printk(KERN_CRIT "Machine check\n");
}
/*
* The System Vector
*/

View File

@ -453,7 +453,7 @@ sable_lynx_enable_irq(unsigned int irq)
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
spin_unlock(&sable_lynx_irq_lock);
#if 0
printk("%s: mask 0x%lx bit 0x%x irq 0x%x\n",
printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
__func__, mask, bit, irq);
#endif
}
@ -469,7 +469,7 @@ sable_lynx_disable_irq(unsigned int irq)
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
spin_unlock(&sable_lynx_irq_lock);
#if 0
printk("%s: mask 0x%lx bit 0x%x irq 0x%x\n",
printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
__func__, mask, bit, irq);
#endif
}

View File

@ -623,7 +623,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
}
lock_kernel();
printk("Bad unaligned kernel access at %016lx: %p %lx %ld\n",
printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
pc, va, opcode, reg);
do_exit(SIGSEGV);

View File

@ -474,14 +474,34 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
CONFIG_SMC911X=y
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set

View File

@ -465,12 +465,33 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set

View File

@ -496,13 +496,33 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
CONFIG_SMC911X=y
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set

View File

@ -490,13 +490,33 @@ CONFIG_NETDEVICES=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
CONFIG_SMC911X=y
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set

View File

@ -24,7 +24,7 @@
#include <linux/mtd/plat-ram.h>
#include <linux/memory.h>
#include <linux/gpio.h>
#include <linux/smc911x.h>
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
@ -70,7 +70,7 @@ static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct resource smc911x_resources[] = {
static struct resource smsc911x_resources[] = {
[0] = {
.start = CS1_BASE_ADDR + 0x300,
.end = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
@ -79,22 +79,25 @@ static struct resource smc911x_resources[] = {
[1] = {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
.end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
.flags = IORESOURCE_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
static struct smc911x_platdata smc911x_info = {
.flags = SMC911X_USE_32BIT,
.irq_flags = IRQF_SHARED | IRQF_TRIGGER_LOW,
static struct smsc911x_platform_config smsc911x_info = {
.flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY |
SMSC911X_SAVE_MAC_ADDRESS,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device pcm037_eth = {
.name = "smc911x",
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(smc911x_resources),
.resource = smc911x_resources,
.num_resources = ARRAY_SIZE(smsc911x_resources),
.resource = smsc911x_resources,
.dev = {
.platform_data = &smc911x_info,
.platform_data = &smsc911x_info,
},
};

View File

@ -23,6 +23,7 @@
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -41,12 +42,12 @@
#include "mmc-twl4030.h"
#define LDP_SMC911X_CS 1
#define LDP_SMC911X_GPIO 152
#define LDP_SMSC911X_CS 1
#define LDP_SMSC911X_GPIO 152
#define DEBUG_BASE 0x08000000
#define LDP_ETHR_START DEBUG_BASE
static struct resource ldp_smc911x_resources[] = {
static struct resource ldp_smsc911x_resources[] = {
[0] = {
.start = LDP_ETHR_START,
.end = LDP_ETHR_START + SZ_4K,
@ -59,40 +60,50 @@ static struct resource ldp_smc911x_resources[] = {
},
};
static struct platform_device ldp_smc911x_device = {
.name = "smc911x",
static struct smsc911x_platform_config ldp_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device ldp_smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(ldp_smc911x_resources),
.resource = ldp_smc911x_resources,
.num_resources = ARRAY_SIZE(ldp_smsc911x_resources),
.resource = ldp_smsc911x_resources,
.dev = {
.platform_data = &ldp_smsc911x_config,
},
};
static struct platform_device *ldp_devices[] __initdata = {
&ldp_smc911x_device,
&ldp_smsc911x_device,
};
static inline void __init ldp_init_smc911x(void)
static inline void __init ldp_init_smsc911x(void)
{
int eth_cs;
unsigned long cs_mem_base;
int eth_gpio = 0;
eth_cs = LDP_SMC911X_CS;
eth_cs = LDP_SMSC911X_CS;
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc911x\n");
printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
return;
}
ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
ldp_smc911x_resources[0].end = cs_mem_base + 0xff;
ldp_smsc911x_resources[0].start = cs_mem_base + 0x0;
ldp_smsc911x_resources[0].end = cs_mem_base + 0xff;
udelay(100);
eth_gpio = LDP_SMC911X_GPIO;
eth_gpio = LDP_SMSC911X_GPIO;
ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
if (gpio_request(eth_gpio, "smc911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
eth_gpio);
return;
}
@ -104,7 +115,7 @@ static void __init omap_ldp_init_irq(void)
omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
ldp_init_smc911x();
ldp_init_smsc911x();
}
static struct omap_uart_config ldp_uart_config __initdata = {

View File

@ -57,6 +57,9 @@
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@ -116,6 +119,67 @@ static void __init overo_ads7846_init(void)
static inline void __init overo_ads7846_init(void) { return; }
#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
static struct resource overo_smsc911x_resources[] = {
{
.name = "smsc911x-memory",
.flags = IORESOURCE_MEM,
},
{
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
static struct smsc911x_platform_config overo_smsc911x_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
.flags = SMSC911X_USE_32BIT ,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device overo_smsc911x_device = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(overo_smsc911x_resources),
.resource = &overo_smsc911x_resources,
.dev = {
.platform_data = &overo_smsc911x_config,
},
};
static inline void __init overo_init_smsc911x(void)
{
unsigned long cs_mem_base;
if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
return;
}
overo_smsc911x_resources[0].start = cs_mem_base + 0x0;
overo_smsc911x_resources[0].end = cs_mem_base + 0xff;
if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
(gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) {
gpio_export(OVERO_SMSC911X_GPIO, 0);
} else {
printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n");
return;
}
overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
overo_smsc911x_resources[1].end = 0;
platform_device_register(&overo_smsc911x_device);
}
#else
static inline void __init overo_init_smsc911x(void) { return; }
#endif
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@ -290,6 +354,7 @@ static void __init overo_init(void)
overo_flash_init();
usb_musb_init();
overo_ads7846_init();
overo_init_smsc911x();
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&

View File

@ -380,14 +380,49 @@ static struct pca953x_platform_data pca9536_data = {
.gpio_base = NR_BUILTIN_GPIO + 1,
};
static struct soc_camera_link iclink[] = {
{
.bus_id = 0, /* Must match with the camera ID above */
.gpio = NR_BUILTIN_GPIO + 1,
}, {
.bus_id = 0, /* Must match with the camera ID above */
.gpio = -ENXIO,
static int gpio_bus_switch;
static int pcm990_camera_set_bus_param(struct soc_camera_link *link,
unsigned long flags)
{
if (gpio_bus_switch <= 0) {
if (flags == SOCAM_DATAWIDTH_10)
return 0;
else
return -EINVAL;
}
if (flags & SOCAM_DATAWIDTH_8)
gpio_set_value(gpio_bus_switch, 1);
else
gpio_set_value(gpio_bus_switch, 0);
return 0;
}
static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link)
{
int ret;
if (!gpio_bus_switch) {
ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
if (!ret) {
gpio_bus_switch = NR_BUILTIN_GPIO + 1;
gpio_direction_output(gpio_bus_switch, 0);
} else
gpio_bus_switch = -EINVAL;
}
if (gpio_bus_switch > 0)
return SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_10;
else
return SOCAM_DATAWIDTH_10;
}
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match with the camera ID above */
.query_bus_param = pcm990_camera_query_bus_param,
.set_bus_param = pcm990_camera_set_bus_param,
};
/* Board I2C devices. */
@ -398,10 +433,10 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
.platform_data = &pca9536_data,
}, {
I2C_BOARD_INFO("mt9v022", 0x48),
.platform_data = &iclink[0], /* With extender */
.platform_data = &iclink, /* With extender */
}, {
I2C_BOARD_INFO("mt9m001", 0x5d),
.platform_data = &iclink[0], /* With extender */
.platform_data = &iclink, /* With extender */
},
};
#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */

View File

@ -28,7 +28,7 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/smc911x.h>
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
#include <asm/clkdev.h>
@ -128,14 +128,15 @@ int realview_flash_register(struct resource *res, u32 num)
return platform_device_register(&realview_flash_device);
}
static struct smc911x_platdata realview_smc911x_platdata = {
.flags = SMC911X_USE_32BIT,
.irq_flags = IRQF_SHARED,
.irq_polarity = 1,
static struct smsc911x_platform_config smsc911x_config = {
.flags = SMSC911X_USE_32BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct platform_device realview_eth_device = {
.name = "smc911x",
.name = "smsc911x",
.id = 0,
.num_resources = 2,
};
@ -145,8 +146,8 @@ int realview_eth_register(const char *name, struct resource *res)
if (name)
realview_eth_device.name = name;
realview_eth_device.resource = res;
if (strcmp(realview_eth_device.name, "smc911x") == 0)
realview_eth_device.dev.platform_data = &realview_smc911x_platdata;
if (strcmp(realview_eth_device.name, "smsc911x") == 0)
realview_eth_device.dev.platform_data = &smsc911x_config;
return platform_device_register(&realview_eth_device);
}

View File

@ -0,0 +1,52 @@
/*
* mx3_camera.h - i.MX3x camera driver header file
*
* Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _MX3_CAMERA_H_
#define _MX3_CAMERA_H_
#include <linux/device.h>
#define MX3_CAMERA_CLK_SRC 1
#define MX3_CAMERA_EXT_VSYNC 2
#define MX3_CAMERA_DP 4
#define MX3_CAMERA_PCP 8
#define MX3_CAMERA_HSP 0x10
#define MX3_CAMERA_VSP 0x20
#define MX3_CAMERA_DATAWIDTH_4 0x40
#define MX3_CAMERA_DATAWIDTH_8 0x80
#define MX3_CAMERA_DATAWIDTH_10 0x100
#define MX3_CAMERA_DATAWIDTH_15 0x200
#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
/**
* struct mx3_camera_pdata - i.MX3x camera platform data
* @flags: MX3_CAMERA_* flags
* @mclk_10khz: master clock frequency in 10kHz units
* @dma_dev: IPU DMA device to match against in channel allocation
*/
struct mx3_camera_pdata {
unsigned long flags;
unsigned long mclk_10khz;
struct device *dma_dev;
};
#endif

View File

@ -250,21 +250,3 @@ asmlinkage void do_bus_error(unsigned long addr, int write_access,
dump_dtlb();
die("Bus Error", regs, SIGKILL);
}
/*
* This functionality is currently not possible to implement because
* we're using segmentation to ensure a fixed mapping of the kernel
* virtual address space.
*
* It would be possible to implement this, but it would require us to
* disable segmentation at startup and load the kernel mappings into
* the TLB like any other pages. There will be lots of trickery to
* avoid recursive invocation of the TLB miss handler, though...
*/
#ifdef CONFIG_DEBUG_PAGEALLOC
void kernel_map_pages(struct page *page, int numpages, int enable)
{
}
EXPORT_SYMBOL(kernel_map_pages);
#endif

View File

@ -854,7 +854,6 @@ static int __init sram_proc_init(void)
printk(KERN_WARNING "unable to create /proc/sram\n");
return -1;
}
ptr->owner = THIS_MODULE;
ptr->read_proc = sram_proc_read;
return 0;
}

View File

@ -261,7 +261,6 @@ timer_interrupt(int irq, void *dev_id)
static struct irqaction irq2 = {
.handler = timer_interrupt,
.flags = IRQF_SHARED | IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "timer",
};

View File

@ -65,7 +65,6 @@ static int send_ipi(int vector, int wait, cpumask_t cpu_mask);
static struct irqaction irq_ipi = {
.handler = crisv32_ipi_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "ipi",
};

View File

@ -267,7 +267,6 @@ timer_interrupt(int irq, void *dev_id)
static struct irqaction irq_timer = {
.handler = timer_interrupt,
.flags = IRQF_SHARED | IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "timer"
};

View File

@ -109,28 +109,24 @@ static struct irqaction fpga_irq[4] = {
[0] = {
.handler = fpga_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = "fpga.0",
.dev_id = (void *) 0x0028UL,
},
[1] = {
.handler = fpga_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = "fpga.1",
.dev_id = (void *) 0x0050UL,
},
[2] = {
.handler = fpga_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = "fpga.2",
.dev_id = (void *) 0x1c00UL,
},
[3] = {
.handler = fpga_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = "fpga.3",
.dev_id = (void *) 0x6386UL,
}

View File

@ -108,7 +108,6 @@ static struct irqaction fpga_irq[1] = {
[0] = {
.handler = fpga_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "fpga.0",
.dev_id = (void *) 0x0700UL,
}

View File

@ -120,14 +120,12 @@ static struct irqaction mb93493_irq[2] = {
[0] = {
.handler = mb93493_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = "mb93493.0",
.dev_id = (void *) __addr_MB93493_IQSR(0),
},
[1] = {
.handler = mb93493_interrupt,
.flags = IRQF_DISABLED | IRQF_SHARED,
.mask = CPU_MASK_NONE,
.name = "mb93493.1",
.dev_id = (void *) __addr_MB93493_IQSR(1),
}

View File

@ -45,7 +45,6 @@ static irqreturn_t timer_interrupt(int irq, void *dummy);
static struct irqaction timer_irq = {
.handler = timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_NONE,
.name = "timer",
};

View File

@ -60,7 +60,6 @@ static struct irqaction itu_irq = {
.name = "itu",
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER,
.mask = CPU_MASK_NONE,
};
static const int __initdata divide_rate[] = {1, 2, 4, 8};

View File

@ -55,7 +55,6 @@ static struct irqaction timer16_irq = {
.name = "timer-16",
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER,
.mask = CPU_MASK_NONE,
};
static const int __initdata divide_rate[] = {1, 2, 4, 8};

View File

@ -75,7 +75,6 @@ static struct irqaction timer8_irq = {
.name = "timer-8",
.handler = timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER,
.mask = CPU_MASK_NONE,
};
static const int __initdata divide_rate[] = {8, 64, 8192};

Some files were not shown because too many files have changed in this diff Show More