ARM: DT updates for v5.4
This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit respectively.
There are lots of cleanups and additional hardware support for platforms
we already support based on SoCs from Renesas, ST-Microelectronics,
Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform,
usually paired with an external 5G modem. So far we only support the
Qualcomm SM8150 MTP reference platform, but no actual products.
For the slightly older Qualcomm platforms, support for several interesting
products is getting added: Three laptops based on Snapdragon 835/MSM8998
(Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on
Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on
the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150
aka Android One 2nd gen "seed" aka Wileyfox Swift).
Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
Allwinner V3 is a repackaged version of the existing low-end V3s chip,
and is used in the tiny Lichee Pi Zero plus, also added here. There is
also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the
eMMC variant of the Olimex A64-Olinuxino development board.
NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family,
similar to the i.MX8M Mini. As usual, there is a large number of new
boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard
Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M,
and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit,
we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their
set-top-box line and smart speaker with newer CPU and GPU cores compared
to their predecessors. Both are now also supported by the Khadas VIM3
development board series, and the dts files for that get reorganized a
bit to better deal with all variants. Another board based on SM1 that
gets added is the SEI Robotics SEI610.
There are a handful of new x86 and Power9 server boards using Aspeed BMC
chips that are gaining support for running Linux on the BMC through the
OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2,
and Mihawk. Notably these are still new machines using SoCs based on
the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based
AST2600 is still ramping up.
There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end
RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and
Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings
(digital signage, PoS, ...).
One more single-board computer based on the popular 64-bit RK3399 is
added: the Leez RK3399 P710.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJdf6StAAoJEJpsee/mABjZDfEP/3h0GusRkoQ6PJ5FHsj4nIR6
NJK8RxmX4B4ctXxBc+Rbt8bHp1d/IdHL4Jcqe7xgR2OIVQPloJz1lFrLaF0wn4Mu
G1EP2DzcLym3K0lBwhByvXfU1s2lhaTYdT594J8kTEVgcPXe79LKqH42A1T+1IlC
7+xAh9sU++NLo64w+Iam3d3T72ugyeO7THWiie7Rb9wACS94i7cZwvasur35aHxf
Ut5nOQYPbTuVVvN1FfZAdrHJpK9r7pbJLVwHLMdHnUYup2XDmoC6iuDrKlsWxqjs
SBL0u+dO5pkdKQp17RZFQZwrx2Y97E9KLWaT9Cqb7nwJ+ftYf419TUioQvmyJRZd
DEsCz6GVCCOs2zFcGj+9iGRr5wA2O3I42dOZkkkTciztksFwSmomrSlwAgVBT2ms
In6K3g2DrN31aDGFW9dZnxBXHVHWXkqr/TN4UIO2h0jfR4bazAvPzBiDpJdkz1NY
KPpDrdTRA2k4UnSimot/7Pw8y2NtsTDVJeQS1KydSe44PiLLumO8hg+FfnhJoW5s
oaSjX89549JvUIrA7TbXPxpyGS8oo7a1XkQyzfWZs8l7JMWoR5oK/VdiuDBL7YDE
XFlcZmCmB+kUgtSgXjw9FflkoMn06usVZBo1rnWFApYmzZ3htnniNSgz/zjMJpXn
OtQTQnP2LzS+ioxqB2Se
=Bm5T
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"This is another huge branch with close to 450 changessets related to
devicetree files, roughly half of this for 32-bit and 64-bit
respectively. There are lots of cleanups and additional hardware
support for platforms we already support based on SoCs from Renesas,
ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
other manufacturers.
A total of 6 new SoCs and 37 new boards gets added this time, one more
SoC will come in a follow-up branch. Most of the new boards are for
64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
Going more into details for SoC platforms with new hardware support:
- The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
platform, usually paired with an external 5G modem. So far we only
support the Qualcomm SM8150 MTP reference platform, but no actual
products.
- For the slightly older Qualcomm platforms, support for several
interesting products is getting added: Three laptops based on
Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
and several phones based on the older Snapdragon 410/MSM8916
(Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
aka Wileyfox Swift).
- Mediatek MT7629 is a new wireless network router chip, similar to
the older MT7623. It gets added together with the reference board
implementation.
- Allwinner V3 is a repackaged version of the existing low-end V3s
chip, and is used in the tiny Lichee Pi Zero plus, also added here.
There is also a new TV set-top box based on Allwinner H6, the Tanix
TX6, and the eMMC variant of the Olimex A64-Olinuxino development
board.
- NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
family, similar to the i.MX8M Mini. As usual, there is a large
number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
SolidRun Hummingboard Pulse baseboard and System-on-Module,
Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
Innovations i.MX7 RMU2 board.
- In a different NXP product line, the Layerscape LS1046A "Freeway"
reference board gets added.
- Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
their set-top-box line and smart speaker with newer CPU and GPU
cores compared to their predecessors. Both are now also supported
by the Khadas VIM3 development board series, and the dts files for
that get reorganized a bit to better deal with all variants.
Another board based on SM1 that gets added is the SEI Robotics
SEI610.
- There are a handful of new x86 and Power9 server boards using
Aspeed BMC chips that are gaining support for running Linux on the
BMC through the OpenBMC project: Facebook
Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
these are still new machines using SoCs based on the ARM9 and ARM11
CPU cores, as support for the new Cortex-A7 based AST2600 is still
ramping up.
- There are three new end-user products using 32-bit Rockchips SoCs:
Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
low-end RK3229 chip, while the two AOpen products Chromebox Mini
(Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
commercial settings(digital signage, PoS, ...).
- One more single-board computer based on the popular 64-bit RK3399
is added: the Leez RK3399 P710"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
arm64: dts: qcom: Add Lenovo Yoga C630
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
ARM; dts: aspeed: mihawk: File should not be executable
ARM: dts: aspeed: swift: Change power supplies to version 2
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed-g4: Add all flash chips
ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
ARM: dts: exynos: Remove not accurate secondary ADC compatible
arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
arm64: dts: meson-sm1-sei610: add stdout-path property back
arm64: dts: meson-sm1-sei610: enable DVFS
arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
arm64: dts: meson: g12a: add reset to tdm formatters
...
This commit is contained in:
Linus Torvalds
commit
cef7298262
|
|
@ -91,13 +91,11 @@ properties:
|
|||
- description: Boards with the Amlogic Meson GXL S905X SoC
|
||||
items:
|
||||
- enum:
|
||||
- amediatech,x96-max
|
||||
- amlogic,p212
|
||||
- hwacom,amazetv
|
||||
- khadas,vim
|
||||
- libretech,cc
|
||||
- nexbox,a95x
|
||||
- seirobotics,sei510
|
||||
- const: amlogic,s905x
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
|
|
@ -129,16 +127,33 @@ properties:
|
|||
- const: amlogic,a113d
|
||||
- const: amlogic,meson-axg
|
||||
|
||||
- description: Boards with the Amlogic Meson G12A S905D2 SoC
|
||||
- description: Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC
|
||||
items:
|
||||
- enum:
|
||||
- amediatech,x96-max
|
||||
- amlogic,u200
|
||||
- seirobotics,sei510
|
||||
- const: amlogic,g12a
|
||||
|
||||
- description: Boards with the Amlogic Meson G12B A311D SoC
|
||||
items:
|
||||
- enum:
|
||||
- khadas,vim3
|
||||
- const: amlogic,a311d
|
||||
- const: amlogic,g12b
|
||||
|
||||
- description: Boards with the Amlogic Meson G12B S922X SoC
|
||||
items:
|
||||
- enum:
|
||||
- hardkernel,odroid-n2
|
||||
- khadas,vim3
|
||||
- const: amlogic,s922x
|
||||
- const: amlogic,g12b
|
||||
|
||||
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
|
||||
items:
|
||||
- enum:
|
||||
- seirobotics,sei610
|
||||
- khadas,vim3l
|
||||
- const: amlogic,sm1
|
||||
...
|
||||
|
|
|
|||
|
|
@ -161,6 +161,20 @@ properties:
|
|||
items:
|
||||
- enum:
|
||||
- fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
|
||||
- kontron,imx6ul-n6310-som # Kontron N6310 SOM
|
||||
- const: fsl,imx6ul
|
||||
|
||||
- description: Kontron N6310 S Board
|
||||
items:
|
||||
- const: kontron,imx6ul-n6310-s
|
||||
- const: kontron,imx6ul-n6310-som
|
||||
- const: fsl,imx6ul
|
||||
|
||||
- description: Kontron N6310 S 43 Board
|
||||
items:
|
||||
- const: kontron,imx6ul-n6310-s-43
|
||||
- const: kontron,imx6ul-n6310-s
|
||||
- const: kontron,imx6ul-n6310-som
|
||||
- const: fsl,imx6ul
|
||||
|
||||
- description: i.MX6ULL based Boards
|
||||
|
|
@ -188,6 +202,7 @@ properties:
|
|||
- fsl,imx7d-sdb # i.MX7 SabreSD Board
|
||||
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
|
||||
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
|
||||
- zii,imx7d-rmu2 # ZII RMU2 Board
|
||||
- zii,imx7d-rpu2 # ZII RPU2 Board
|
||||
- const: fsl,imx7d
|
||||
|
||||
|
|
@ -214,16 +229,26 @@ properties:
|
|||
- fsl,imx8mm-evk # i.MX8MM EVK Board
|
||||
- const: fsl,imx8mm
|
||||
|
||||
- description: i.MX8MN based Boards
|
||||
items:
|
||||
- enum:
|
||||
- fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board
|
||||
- const: fsl,imx8mn
|
||||
|
||||
- description: i.MX8MQ based Boards
|
||||
items:
|
||||
- enum:
|
||||
- boundary,imx8mq-nitrogen8m # i.MX8MQ NITROGEN Board
|
||||
- fsl,imx8mq-evk # i.MX8MQ EVK Board
|
||||
- purism,librem5-devkit # Purism Librem5 devkit
|
||||
- solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
|
||||
- technexion,pico-pi-imx8m # TechNexion PICO-PI-8M evk
|
||||
- const: fsl,imx8mq
|
||||
|
||||
- description: i.MX8QXP based Boards
|
||||
items:
|
||||
- enum:
|
||||
- einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
|
||||
- fsl,imx8qxp-mek # i.MX8QXP MEK Board
|
||||
- const: fsl,imx8qxp
|
||||
|
||||
|
|
@ -283,6 +308,7 @@ properties:
|
|||
- description: LS1046A based Boards
|
||||
items:
|
||||
- enum:
|
||||
- fsl,ls1046a-frwy
|
||||
- fsl,ls1046a-qds
|
||||
- fsl,ls1046a-rdb
|
||||
- const: fsl,ls1046a
|
||||
|
|
|
|||
|
|
@ -46,6 +46,10 @@ properties:
|
|||
- enum:
|
||||
- mediatek,mt6765-evb
|
||||
- const: mediatek,mt6765
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt6779-evb
|
||||
- const: mediatek,mt6779
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt6795-evb
|
||||
|
|
|
|||
|
|
@ -45,6 +45,7 @@ description: |
|
|||
mtp
|
||||
sbc
|
||||
hk01
|
||||
qrd
|
||||
|
||||
The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
|
||||
where the minor number may be omitted when it's zero, i.e. v1.0 is the same
|
||||
|
|
@ -115,6 +116,13 @@ properties:
|
|||
- const: qcom,msm8916-mtp
|
||||
- const: qcom,msm8916
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- longcheer,l8150
|
||||
- samsung,a3u-eur
|
||||
- samsung,a5u-eur
|
||||
- const: qcom,msm8916
|
||||
|
||||
- items:
|
||||
- const: qcom,msm8996-mtp
|
||||
|
||||
|
|
|
|||
|
|
@ -128,6 +128,21 @@ properties:
|
|||
- const: google,veyron
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Google Fievel (AOPEN Chromebox Mini)
|
||||
items:
|
||||
- const: google,veyron-fievel-rev8
|
||||
- const: google,veyron-fievel-rev7
|
||||
- const: google,veyron-fievel-rev6
|
||||
- const: google,veyron-fievel-rev5
|
||||
- const: google,veyron-fievel-rev4
|
||||
- const: google,veyron-fievel-rev3
|
||||
- const: google,veyron-fievel-rev2
|
||||
- const: google,veyron-fievel-rev1
|
||||
- const: google,veyron-fievel-rev0
|
||||
- const: google,veyron-fievel
|
||||
- const: google,veyron
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Google Gru (dev-board)
|
||||
items:
|
||||
- const: google,gru-rev15
|
||||
|
|
@ -311,6 +326,21 @@ properties:
|
|||
- const: google,veyron
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Google Tiger (AOpen Chromebase Mini)
|
||||
items:
|
||||
- const: google,veyron-tiger-rev8
|
||||
- const: google,veyron-tiger-rev7
|
||||
- const: google,veyron-tiger-rev6
|
||||
- const: google,veyron-tiger-rev5
|
||||
- const: google,veyron-tiger-rev4
|
||||
- const: google,veyron-tiger-rev3
|
||||
- const: google,veyron-tiger-rev2
|
||||
- const: google,veyron-tiger-rev1
|
||||
- const: google,veyron-tiger-rev0
|
||||
- const: google,veyron-tiger
|
||||
- const: google,veyron
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Haoyu MarsBoard RK3066
|
||||
items:
|
||||
- const: haoyu,marsboard-rk3066
|
||||
|
|
@ -329,6 +359,16 @@ properties:
|
|||
- khadas,edge-v
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Mecer Xtreme Mini S6
|
||||
items:
|
||||
- const: mecer,xms6
|
||||
- const: rockchip,rk3229
|
||||
|
||||
- description: Leez RK3399 P710
|
||||
items:
|
||||
- const: leez,p710
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: mqmaker MiQi
|
||||
items:
|
||||
- const: mqmaker,miqi
|
||||
|
|
@ -424,11 +464,6 @@ properties:
|
|||
- rockchip,rk3288-evb-rk808
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Rockchip RK3288 Fennec
|
||||
items:
|
||||
- const: rockchip,rk3288-fennec
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Rockchip RK3328 Evaluation board
|
||||
items:
|
||||
- const: rockchip,rk3328-evb
|
||||
|
|
|
|||
|
|
@ -353,6 +353,12 @@ properties:
|
|||
- const: licheepi,licheepi-zero
|
||||
- const: allwinner,sun8i-v3s
|
||||
|
||||
- description: Lichee Zero Plus (with S3, without eMMC/SPI Flash)
|
||||
items:
|
||||
- const: sipeed,lichee-zero-plus
|
||||
- const: sochip,s3
|
||||
- const: allwinner,sun8i-v3
|
||||
|
||||
- description: Linksprite PCDuino
|
||||
items:
|
||||
- const: linksprite,a10-pcduino
|
||||
|
|
@ -568,6 +574,11 @@ properties:
|
|||
- const: olimex,a64-olinuxino
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Olimex A64-OlinuXino (with eMMC)
|
||||
items:
|
||||
- const: olimex,a64-olinuxino-emmc
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Olimex A64 Teres-I
|
||||
items:
|
||||
- const: olimex,a64-teres-i
|
||||
|
|
@ -671,6 +682,11 @@ properties:
|
|||
- const: sinlinx,sina33
|
||||
- const: allwinner,sun8i-a33
|
||||
|
||||
- description: Tanix TX6
|
||||
items:
|
||||
- const: oranth,tanix-tx6
|
||||
- const: allwinner,sun50i-h6
|
||||
|
||||
- description: TBS A711 Tablet
|
||||
items:
|
||||
- const: tbs-biometrics,a711
|
||||
|
|
|
|||
|
|
@ -44,6 +44,10 @@ Optional properties:
|
|||
what bootloader sets up in IOMUXC_GPR1[11:0] will be
|
||||
used.
|
||||
|
||||
- fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
|
||||
devices, the presence of this property indicates that
|
||||
the weim bus should operate in Burst Clock Mode.
|
||||
|
||||
Timing property for child nodes. It is mandatory, not optional.
|
||||
|
||||
- fsl,weim-cs-timing: The timing array, contains timing values for the
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ Required Properties:
|
|||
components.
|
||||
- resets : phandle of the internal reset line
|
||||
- #clock-cells : should be 1.
|
||||
- #reset-cells : should be 1 on the g12a (and following) soc family
|
||||
|
||||
Each clock is assigned an identifier and client nodes can use this identifier
|
||||
to specify the clock which they consume. All available clocks are defined as
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ Required Properties:
|
|||
"amlogic,axg-clkc" for AXG SoC.
|
||||
"amlogic,g12a-clkc" for G12A SoC.
|
||||
"amlogic,g12b-clkc" for G12B SoC.
|
||||
"amlogic,sm1-clkc" for SM1 SoC.
|
||||
- clocks : list of clock phandle, one for each entry clock-names.
|
||||
- clock-names : should contain the following:
|
||||
* "xtal": the platform xtal
|
||||
|
|
|
|||
|
|
@ -0,0 +1,112 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/bindings/clock/imx8mn-clock.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: NXP i.MX8M Nano Clock Control Module Binding
|
||||
|
||||
maintainers:
|
||||
- Anson Huang <Anson.Huang@nxp.com>
|
||||
|
||||
description: |
|
||||
NXP i.MX8M Nano clock control module is an integrated clock controller, which
|
||||
generates and supplies to all modules.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: fsl,imx8mn-ccm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: 32k osc
|
||||
- description: 24m osc
|
||||
- description: ext1 clock input
|
||||
- description: ext2 clock input
|
||||
- description: ext3 clock input
|
||||
- description: ext4 clock input
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: osc_32k
|
||||
- const: osc_24m
|
||||
- const: clk_ext1
|
||||
- const: clk_ext2
|
||||
- const: clk_ext3
|
||||
- const: clk_ext4
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
description: |
|
||||
The clock consumer should specify the desired clock by having the clock
|
||||
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mn-clock.h
|
||||
for the full list of i.MX8M Nano clock IDs.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- '#clock-cells'
|
||||
|
||||
examples:
|
||||
# Clock Control Module node:
|
||||
- |
|
||||
clk: clock-controller@30380000 {
|
||||
compatible = "fsl,imx8mn-ccm";
|
||||
reg = <0x0 0x30380000 0x0 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>,
|
||||
<&clk_ext2>, <&clk_ext3>, <&clk_ext4>;
|
||||
clock-names = "osc_32k", "osc_24m", "clk_ext1",
|
||||
"clk_ext2", "clk_ext3", "clk_ext4";
|
||||
};
|
||||
|
||||
# Required external clocks for Clock Control Module node:
|
||||
- |
|
||||
osc_32k: clock-osc-32k {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "osc_32k";
|
||||
};
|
||||
|
||||
osc_24m: clock-osc-24m {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "osc_24m";
|
||||
};
|
||||
|
||||
clk_ext1: clock-ext1 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <133000000>;
|
||||
clock-output-names = "clk_ext1";
|
||||
};
|
||||
|
||||
clk_ext2: clock-ext2 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <133000000>;
|
||||
clock-output-names = "clk_ext2";
|
||||
};
|
||||
|
||||
clk_ext3: clock-ext3 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <133000000>;
|
||||
clock-output-names = "clk_ext3";
|
||||
};
|
||||
|
||||
clk_ext4: clock-ext4 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency= <133000000>;
|
||||
clock-output-names = "clk_ext4";
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -3,6 +3,7 @@ EEPROMs (SPI) compatible with Atmel at25.
|
|||
Required properties:
|
||||
- compatible : Should be "<vendor>,<type>", and generic value "atmel,at25".
|
||||
Example "<vendor>,<type>" values:
|
||||
"anvo,anv32e61w"
|
||||
"microchip,25lc040"
|
||||
"st,m95m02"
|
||||
"st,m95256"
|
||||
|
|
|
|||
|
|
@ -26,6 +26,9 @@ properties:
|
|||
- items:
|
||||
- const: allwinner,sun50i-a64-i2c
|
||||
- const: allwinner,sun6i-a31-i2c
|
||||
- items:
|
||||
- const: allwinner,sun50i-h6-i2c
|
||||
- const: allwinner,sun6i-a31-i2c
|
||||
|
||||
- const: marvell,mv64xxx-i2c
|
||||
- const: marvell,mv78230-i2c
|
||||
|
|
|
|||
|
|
@ -0,0 +1,43 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Allwinner A33 Thermal Sensor Device Tree Bindings
|
||||
|
||||
maintainers:
|
||||
- Chen-Yu Tsai <wens@csie.org>
|
||||
- Maxime Ripard <maxime.ripard@bootlin.com>
|
||||
|
||||
properties:
|
||||
"#io-channel-cells":
|
||||
const: 0
|
||||
|
||||
"#thermal-sensor-cells":
|
||||
const: 0
|
||||
|
||||
compatible:
|
||||
const: allwinner,sun8i-a33-ths
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- "#io-channel-cells"
|
||||
- "#thermal-sensor-cells"
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
ths: ths@1c25000 {
|
||||
compatible = "allwinner,sun8i-a33-ths";
|
||||
reg = <0x01c25000 0x100>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
#io-channel-cells = <0>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -15,6 +15,7 @@ Required properties:
|
|||
"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
|
||||
"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
|
||||
"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
|
||||
"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
|
||||
"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
|
||||
"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
|
||||
"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
|
||||
|
|
|
|||
|
|
@ -26,6 +26,7 @@ Required properties:
|
|||
- GXBB (S905) : "amlogic,gxbb-vdec"
|
||||
- GXL (S905X, S905D) : "amlogic,gxl-vdec"
|
||||
- GXM (S912) : "amlogic,gxm-vdec"
|
||||
followed by the common "amlogic,gx-vdec"
|
||||
- reg: base address and size of he following memory-mapped regions :
|
||||
- dos
|
||||
- esparser
|
||||
|
|
@ -47,8 +48,8 @@ Required properties:
|
|||
|
||||
Example:
|
||||
|
||||
vdec: video-decoder@c8820000 {
|
||||
compatible = "amlogic,gxbb-vdec";
|
||||
vdec: video-codec@c8820000 {
|
||||
compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec";
|
||||
reg = <0x0 0xc8820000 0x0 0x10000>,
|
||||
<0x0 0xc110a580 0x0 0xe4>;
|
||||
reg-names = "dos", "esparser";
|
||||
|
|
|
|||
|
|
@ -0,0 +1,76 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
|
||||
|
||||
maintainers:
|
||||
- Chen-Yu Tsai <wens@csie.org>
|
||||
- Maxime Ripard <maxime.ripard@bootlin.com>
|
||||
|
||||
properties:
|
||||
"#thermal-sensor-cells":
|
||||
const: 0
|
||||
|
||||
compatible:
|
||||
enum:
|
||||
- allwinner,sun4i-a10-ts
|
||||
- allwinner,sun5i-a13-ts
|
||||
- allwinner,sun6i-a31-ts
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
allwinner,ts-attached:
|
||||
$ref: /schemas/types.yaml#/definitions/flag
|
||||
description: A touchscreen is attached to the controller
|
||||
|
||||
allwinner,tp-sensitive-adjust:
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 0
|
||||
maximum: 15
|
||||
default: 15
|
||||
description: Sensitivity of pen down detection
|
||||
|
||||
allwinner,filter-type:
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32
|
||||
- minimum: 0
|
||||
maximum: 3
|
||||
default: 1
|
||||
description: |
|
||||
Select median and averaging filter. Sample used for median /
|
||||
averaging filter:
|
||||
0: 4/2
|
||||
1: 5/3
|
||||
2: 8/4
|
||||
3: 16/8
|
||||
|
||||
required:
|
||||
- "#thermal-sensor-cells"
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
rtp: rtp@1c25000 {
|
||||
compatible = "allwinner,sun4i-a10-ts";
|
||||
reg = <0x01c25000 0x100>;
|
||||
interrupts = <29>;
|
||||
allwinner,ts-attached;
|
||||
#thermal-sensor-cells = <0>;
|
||||
/* sensitive/noisy touch panel */
|
||||
allwinner,tp-sensitive-adjust = <0>;
|
||||
allwinner,filter-type = <3>;
|
||||
};
|
||||
|
||||
...
|
||||
|
|
@ -1,59 +0,0 @@
|
|||
Allwinner SoCs' GPADC Device Tree bindings
|
||||
------------------------------------------
|
||||
The Allwinner SoCs all have an ADC that can also act as a thermal sensor
|
||||
and sometimes as a touchscreen controller.
|
||||
|
||||
Required properties:
|
||||
- compatible: "allwinner,sun8i-a33-ths",
|
||||
- reg: mmio address range of the chip,
|
||||
- #thermal-sensor-cells: shall be 0,
|
||||
- #io-channel-cells: shall be 0,
|
||||
|
||||
Example:
|
||||
ths: ths@1c25000 {
|
||||
compatible = "allwinner,sun8i-a33-ths";
|
||||
reg = <0x01c25000 0x100>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
#io-channel-cells = <0>;
|
||||
};
|
||||
|
||||
sun4i, sun5i and sun6i SoCs are also supported via the older binding:
|
||||
|
||||
sun4i resistive touchscreen controller
|
||||
--------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
|
||||
"allwinner,sun6i-a31-ts"
|
||||
- reg: mmio address range of the chip
|
||||
- interrupts: interrupt to which the chip is connected
|
||||
- #thermal-sensor-cells: shall be 0
|
||||
|
||||
Optional properties:
|
||||
- allwinner,ts-attached : boolean indicating that an actual touchscreen
|
||||
is attached to the controller
|
||||
- allwinner,tp-sensitive-adjust : integer (4 bits)
|
||||
adjust sensitivity of pen down detection
|
||||
between 0 (least sensitive) and 15
|
||||
(defaults to 15)
|
||||
- allwinner,filter-type : integer (2 bits)
|
||||
select median and averaging filter
|
||||
samples used for median / averaging filter
|
||||
0: 4/2
|
||||
1: 5/3
|
||||
2: 8/4
|
||||
3: 16/8
|
||||
(defaults to 1)
|
||||
|
||||
Example:
|
||||
|
||||
rtp: rtp@1c25000 {
|
||||
compatible = "allwinner,sun4i-a10-ts";
|
||||
reg = <0x01c25000 0x100>;
|
||||
interrupts = <29>;
|
||||
allwinner,ts-attached;
|
||||
#thermal-sensor-cells = <0>;
|
||||
/* sensitive/noisy touch panel */
|
||||
allwinner,tp-sensitive-adjust = <0>;
|
||||
allwinner,filter-type = <3>;
|
||||
};
|
||||
|
|
@ -5,6 +5,7 @@ Required properties:
|
|||
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
|
||||
"renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
|
||||
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
|
||||
"renesas,can-r8a77470" if CAN controller is a part of R8A77470 SoC.
|
||||
"renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
|
||||
"renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
|
||||
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
|
||||
|
|
@ -17,6 +18,8 @@ Required properties:
|
|||
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
|
||||
"renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
|
||||
"renesas,can-r8a77965" if CAN controller is a part of R8A77965 SoC.
|
||||
"renesas,can-r8a77990" if CAN controller is a part of R8A77990 SoC.
|
||||
"renesas,can-r8a77995" if CAN controller is a part of R8A77995 SoC.
|
||||
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
|
||||
"renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
|
||||
compatible device.
|
||||
|
|
@ -33,7 +36,8 @@ Required properties:
|
|||
- pinctrl-0: pin control group to be used for this controller.
|
||||
- pinctrl-names: must be "default".
|
||||
|
||||
Required properties for R8A7795, R8A7796 and R8A77965:
|
||||
Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
|
||||
R8A77990, and R8A77995:
|
||||
For the denoted SoCs, "clkp2" can be CANFD clock. This is a div6 clock and can
|
||||
be used by both CAN and CAN FD controller at the same time. It needs to be
|
||||
scaled to maximum frequency if any of these controllers use it. This is done
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@ Renesas R-Car CAN FD controller Device Tree Bindings
|
|||
Required properties:
|
||||
- compatible: Must contain one or more of the following:
|
||||
- "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
|
||||
- "renesas,r8a774a1-canfd" for R8A774A1 (RZ/G2M) compatible controller.
|
||||
- "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
|
||||
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
|
||||
- "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
|
||||
|
|
@ -11,6 +12,7 @@ Required properties:
|
|||
- "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
|
||||
- "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
|
||||
- "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller.
|
||||
- "renesas,r8a77995-canfd" for R8A77995 (R-Car D3) compatible controller.
|
||||
|
||||
When compatible with the generic version, nodes must list the
|
||||
SoC-specific version corresponding to the platform first, followed by the
|
||||
|
|
@ -29,13 +31,12 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
|
|||
child node supports the "status" property only, which is used to
|
||||
enable/disable the respective channel.
|
||||
|
||||
Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd",
|
||||
"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd"
|
||||
compatible:
|
||||
In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a
|
||||
div6 clock and can be used by both CAN and CAN FD controller at the same time.
|
||||
It needs to be scaled to maximum frequency if any of these controllers use it.
|
||||
This is done using the below properties:
|
||||
Required properties for R8A774A1, R8A774C0, R8A7795, R8A7796, R8A77965,
|
||||
R8A77990, and R8A77995:
|
||||
In the denoted SoCs, canfd clock is a div6 clock and can be used by both CAN
|
||||
and CAN FD controller at the same time. It needs to be scaled to maximum
|
||||
frequency if any of these controllers use it. This is done using the below
|
||||
properties:
|
||||
|
||||
- assigned-clocks: phandle of canfd clock.
|
||||
- assigned-clock-rates: maximum frequency of this clock.
|
||||
|
|
|
|||
|
|
@ -13,7 +13,10 @@ Required properties:
|
|||
- reg : Address and length of the register set for the device
|
||||
- interrupts : Should contain uart interrupt
|
||||
- clocks : phandle + clock specifier pairs, one for each entry in clock-names
|
||||
- clock-names : should contain: "ipg" - the uart clock
|
||||
- clock-names : For vf610/ls1021a/imx7ulp, "ipg" clock is for uart bus/baud
|
||||
clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used to access
|
||||
lpuart controller registers, it also requires "baud" clock for module to
|
||||
receive/transmit data.
|
||||
|
||||
Optional properties:
|
||||
- dmas: A list of two dma specifiers, one for each entry in dma-names.
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@ Required properties:
|
|||
* "mediatek,mt6589-uart" for MT6589 compatible UARTS
|
||||
* "mediatek,mt6755-uart" for MT6755 compatible UARTS
|
||||
* "mediatek,mt6765-uart" for MT6765 compatible UARTS
|
||||
* "mediatek,mt6779-uart" for MT6779 compatible UARTS
|
||||
* "mediatek,mt6795-uart" for MT6795 compatible UARTS
|
||||
* "mediatek,mt6797-uart" for MT6797 compatible UARTS
|
||||
* "mediatek,mt7622-uart" for MT7622 compatible UARTS
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ Required properties:
|
|||
or
|
||||
"fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
|
||||
"fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
|
||||
"fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
|
||||
- reg : Offset and length of the register set for the device
|
||||
- interrupts : Should contain SPI controller interrupt
|
||||
- clocks: from common clock binding: handle to dspi clock.
|
||||
|
|
|
|||
|
|
@ -27,6 +27,8 @@ patternProperties:
|
|||
description: Abilis Systems
|
||||
"^abracon,.*":
|
||||
description: Abracon Corporation
|
||||
"^acme,.*":
|
||||
description: Acme Systems srl
|
||||
"^actions,.*":
|
||||
description: Actions Semiconductor Co., Ltd.
|
||||
"^active-semi,.*":
|
||||
|
|
@ -81,6 +83,8 @@ patternProperties:
|
|||
description: Analogix Semiconductor, Inc.
|
||||
"^andestech,.*":
|
||||
description: Andes Technology Corporation
|
||||
"^anvo,.*":
|
||||
description: Anvo-Systems Dresden GmbH
|
||||
"^apm,.*":
|
||||
description: Applied Micro Circuits Corporation (APM)
|
||||
"^aptina,.*":
|
||||
|
|
@ -269,6 +273,8 @@ patternProperties:
|
|||
description: Emerging Display Technologies
|
||||
"^eeti,.*":
|
||||
description: eGalax_eMPIA Technology Inc
|
||||
"^einfochips,.*":
|
||||
description: Einfochips
|
||||
"^elan,.*":
|
||||
description: Elan Microelectronic Corp.
|
||||
"^elgin,.*":
|
||||
|
|
@ -503,6 +509,8 @@ patternProperties:
|
|||
description: Lantiq Semiconductor
|
||||
"^lattice,.*":
|
||||
description: Lattice Semiconductor
|
||||
"^leez,.*":
|
||||
description: Leez
|
||||
"^lego,.*":
|
||||
description: LEGO Systems A/S
|
||||
"^lemaker,.*":
|
||||
|
|
@ -529,6 +537,8 @@ patternProperties:
|
|||
description: Linear Technology Corporation
|
||||
"^logicpd,.*":
|
||||
description: Logic PD, Inc.
|
||||
"^longcheer,.*":
|
||||
description: Longcheer Technology (Shanghai) Co., Ltd.
|
||||
"^lsi,.*":
|
||||
description: LSI Corp. (LSI Logic)
|
||||
"^lwn,.*":
|
||||
|
|
@ -549,6 +559,8 @@ patternProperties:
|
|||
description: mCube
|
||||
"^meas,.*":
|
||||
description: Measurement Specialties
|
||||
"^mecer,.*":
|
||||
description: Mustek Limited
|
||||
"^mediatek,.*":
|
||||
description: MediaTek Inc.
|
||||
"^megachips,.*":
|
||||
|
|
|
|||
|
|
@ -10016,8 +10016,8 @@ L: linux-media@vger.kernel.org
|
|||
L: linux-renesas-soc@vger.kernel.org
|
||||
T: git git://linuxtv.org/media_tree.git
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/media/renesas,rcar-csi2.txt
|
||||
F: Documentation/devicetree/bindings/media/rcar_vin.txt
|
||||
F: Documentation/devicetree/bindings/media/renesas,csi2.txt
|
||||
F: Documentation/devicetree/bindings/media/renesas,vin.txt
|
||||
F: drivers/media/platform/rcar-vin/
|
||||
|
||||
MEDIA DRIVERS FOR RENESAS - VSP1
|
||||
|
|
|
|||
|
|
@ -569,17 +569,22 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
|
|||
imx6ul-geam.dtb \
|
||||
imx6ul-isiot-emmc.dtb \
|
||||
imx6ul-isiot-nand.dtb \
|
||||
imx6ul-kontron-n6310-s.dtb \
|
||||
imx6ul-kontron-n6310-s-43.dtb \
|
||||
imx6ul-liteboard.dtb \
|
||||
imx6ul-opos6uldev.dtb \
|
||||
imx6ul-pico-hobbit.dtb \
|
||||
imx6ul-pico-pi.dtb \
|
||||
imx6ul-phytec-phyboard-segin-full.dtb \
|
||||
imx6ul-phytec-segin-ff-rdk-nand.dtb \
|
||||
imx6ul-tx6ul-0010.dtb \
|
||||
imx6ul-tx6ul-0011.dtb \
|
||||
imx6ul-tx6ul-mainboard.dtb \
|
||||
imx6ull-14x14-evk.dtb \
|
||||
imx6ull-colibri-eval-v3.dtb \
|
||||
imx6ull-colibri-wifi-eval-v3.dtb \
|
||||
imx6ull-phytec-segin-ff-rdk-nand.dtb \
|
||||
imx6ull-phytec-segin-ff-rdk-emmc.dtb \
|
||||
imx6ull-phytec-segin-lc-rdk-nand.dtb \
|
||||
imx6ulz-14x14-evk.dtb
|
||||
dtb-$(CONFIG_SOC_IMX7D) += \
|
||||
imx7d-cl-som-imx7.dtb \
|
||||
|
|
@ -594,6 +599,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
|
|||
imx7d-sdb.dtb \
|
||||
imx7d-sdb-reva.dtb \
|
||||
imx7d-sdb-sht11.dtb \
|
||||
imx7d-zii-rmu2.dtb \
|
||||
imx7d-zii-rpu2.dtb \
|
||||
imx7s-colibri-eval-v3.dtb \
|
||||
imx7s-mba7.dtb \
|
||||
|
|
@ -905,9 +911,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
rk3188-radxarock.dtb \
|
||||
rk3228-evb.dtb \
|
||||
rk3229-evb.dtb \
|
||||
rk3229-xms6.dtb \
|
||||
rk3288-evb-act8846.dtb \
|
||||
rk3288-evb-rk808.dtb \
|
||||
rk3288-fennec.dtb \
|
||||
rk3288-firefly-beta.dtb \
|
||||
rk3288-firefly.dtb \
|
||||
rk3288-firefly-reload.dtb \
|
||||
|
|
@ -919,6 +925,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
rk3288-tinker.dtb \
|
||||
rk3288-tinker-s.dtb \
|
||||
rk3288-veyron-brain.dtb \
|
||||
rk3288-veyron-fievel.dtb \
|
||||
rk3288-veyron-jaq.dtb \
|
||||
rk3288-veyron-jerry.dtb \
|
||||
rk3288-veyron-mickey.dtb \
|
||||
|
|
@ -926,6 +933,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
|||
rk3288-veyron-minnie.dtb \
|
||||
rk3288-veyron-pinky.dtb \
|
||||
rk3288-veyron-speedy.dtb \
|
||||
rk3288-veyron-tiger.dtb \
|
||||
rk3288-vyasa.dtb
|
||||
dtb-$(CONFIG_ARCH_S3C24XX) += \
|
||||
s3c2416-smdk2416.dtb
|
||||
|
|
@ -1114,6 +1122,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
|
|||
sun8i-r16-nintendo-super-nes-classic.dtb \
|
||||
sun8i-r16-parrot.dtb \
|
||||
sun8i-r40-bananapi-m2-ultra.dtb \
|
||||
sun8i-s3-lichee-zero-plus.dtb \
|
||||
sun8i-t3-cqa3t-bv3.dtb \
|
||||
sun8i-v3s-licheepi-zero.dtb \
|
||||
sun8i-v3s-licheepi-zero-dock.dtb \
|
||||
|
|
@ -1262,6 +1271,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
|
|||
mt7623a-rfb-nand.dtb \
|
||||
mt7623n-rfb-emmc.dtb \
|
||||
mt7623n-bananapi-bpi-r2.dtb \
|
||||
mt7629-rfb.dtb \
|
||||
mt8127-moose.dtb \
|
||||
mt8135-evbp1.dtb
|
||||
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
|
||||
|
|
@ -1271,13 +1281,18 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
|
|||
aspeed-bmc-arm-centriq2400-rep.dtb \
|
||||
aspeed-bmc-arm-stardragon4800-rep2.dtb \
|
||||
aspeed-bmc-facebook-cmm.dtb \
|
||||
aspeed-bmc-facebook-minipack.dtb \
|
||||
aspeed-bmc-facebook-tiogapass.dtb \
|
||||
aspeed-bmc-facebook-wedge40.dtb \
|
||||
aspeed-bmc-facebook-wedge100.dtb \
|
||||
aspeed-bmc-facebook-yamp.dtb \
|
||||
aspeed-bmc-intel-s2600wf.dtb \
|
||||
aspeed-bmc-inspur-fp5280g2.dtb \
|
||||
aspeed-bmc-lenovo-hr630.dtb \
|
||||
aspeed-bmc-lenovo-hr855xg2.dtb \
|
||||
aspeed-bmc-microsoft-olympus.dtb \
|
||||
aspeed-bmc-opp-lanyang.dtb \
|
||||
aspeed-bmc-opp-mihawk.dtb \
|
||||
aspeed-bmc-opp-palmetto.dtb \
|
||||
aspeed-bmc-opp-romulus.dtb \
|
||||
aspeed-bmc-opp-swift.dtb \
|
||||
|
|
|
|||
|
|
@ -5,23 +5,13 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include "am335x-osd335x-common.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "TI AM335x BeagleBone Blue";
|
||||
compatible = "ti,am335x-bone-blue", "ti,am33xx";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&dcdc2_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
|
@ -142,13 +132,6 @@
|
|||
>;
|
||||
};
|
||||
|
||||
i2c0_pins: pinmux_i2c0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
|
||||
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
|
||||
|
|
@ -328,16 +311,6 @@
|
|||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 {
|
||||
reg = <0x24>;
|
||||
};
|
||||
|
||||
baseboard_eeprom: baseboard_eeprom@50 {
|
||||
compatible = "atmel,24c256";
|
||||
reg = <0x50>;
|
||||
|
|
@ -381,66 +354,13 @@
|
|||
/include/ "tps65217.dtsi"
|
||||
|
||||
&tps {
|
||||
interrupts = <7>; /* NMI */
|
||||
interrupt-parent = <&intc>;
|
||||
/delete-property/ ti,pmic-shutdown-controller;
|
||||
|
||||
charger {
|
||||
interrupts = <0>, <1>;
|
||||
interrupt-names = "USB", "AC";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwrbutton {
|
||||
interrupts = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
dcdc1_reg: regulator@0 {
|
||||
regulator-name = "vdds_dpr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2_reg: regulator@1 {
|
||||
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1351500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3_reg: regulator@2 {
|
||||
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: regulator@3 {
|
||||
regulator-name = "vio,vrtc,vdds";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: regulator@4 {
|
||||
regulator-name = "vdd_3v3aux";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: regulator@5 {
|
||||
regulator-name = "vdd_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: regulator@6 {
|
||||
regulator-name = "vdd_3v3a";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
|
|
@ -502,14 +422,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
system-power-controller;
|
||||
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
|
||||
|
|
|
|||
|
|
@ -44,7 +44,6 @@
|
|||
regulator-name = "vwlan_fixed";
|
||||
gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
|
||||
enable-active-high;
|
||||
regulator-boot-off;
|
||||
};
|
||||
|
||||
backlight {
|
||||
|
|
|
|||
|
|
@ -94,6 +94,17 @@
|
|||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sd1_default>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Enable port A as device (via the virtual hub) and port B as
|
||||
* host by default on the eval board. This can be easily changed
|
||||
|
|
|
|||
|
|
@ -0,0 +1,429 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2018 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Facebook Minipack 100 BMC";
|
||||
compatible = "facebook,minipack-bmc", "aspeed,ast2500";
|
||||
|
||||
aliases {
|
||||
/*
|
||||
* Override the default serial aliases to avoid breaking
|
||||
* the legacy applications.
|
||||
*/
|
||||
serial0 = &uart5;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart2;
|
||||
serial3 = &uart3;
|
||||
serial4 = &uart4;
|
||||
|
||||
/*
|
||||
* i2c switch 2-0070, pca9548, 8 child channels assigned
|
||||
* with bus number 16-23.
|
||||
*/
|
||||
i2c16 = &imux16;
|
||||
i2c17 = &imux17;
|
||||
i2c18 = &imux18;
|
||||
i2c19 = &imux19;
|
||||
i2c20 = &imux20;
|
||||
i2c21 = &imux21;
|
||||
i2c22 = &imux22;
|
||||
i2c23 = &imux23;
|
||||
|
||||
/*
|
||||
* i2c switch 8-0070, pca9548, 8 child channels assigned
|
||||
* with bus number 24-31.
|
||||
*/
|
||||
i2c24 = &imux24;
|
||||
i2c25 = &imux25;
|
||||
i2c26 = &imux26;
|
||||
i2c27 = &imux27;
|
||||
i2c28 = &imux28;
|
||||
i2c29 = &imux29;
|
||||
i2c30 = &imux30;
|
||||
i2c31 = &imux31;
|
||||
|
||||
/*
|
||||
* i2c switch 9-0070, pca9548, 8 child channels assigned
|
||||
* with bus number 32-39.
|
||||
*/
|
||||
i2c32 = &imux32;
|
||||
i2c33 = &imux33;
|
||||
i2c34 = &imux34;
|
||||
i2c35 = &imux35;
|
||||
i2c36 = &imux36;
|
||||
i2c37 = &imux37;
|
||||
i2c38 = &imux38;
|
||||
i2c39 = &imux39;
|
||||
|
||||
/*
|
||||
* i2c switch 11-0070, pca9548, 8 child channels assigned
|
||||
* with bus number 40-47.
|
||||
*/
|
||||
i2c40 = &imux40;
|
||||
i2c41 = &imux41;
|
||||
i2c42 = &imux42;
|
||||
i2c43 = &imux43;
|
||||
i2c44 = &imux44;
|
||||
i2c45 = &imux45;
|
||||
i2c46 = &imux46;
|
||||
i2c47 = &imux47;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
status = "okay";
|
||||
aspeed,reset-type = "system";
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
status = "okay";
|
||||
aspeed,reset-type = "system";
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
#include "facebook-bmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default
|
||||
&pinctrl_ncts1_default
|
||||
&pinctrl_ndsr1_default
|
||||
&pinctrl_ndtr1_default
|
||||
&pinctrl_nrts1_default>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd2_default
|
||||
&pinctrl_rxd2_default>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd3_default
|
||||
&pinctrl_rxd3_default>;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd4_default
|
||||
&pinctrl_rxd4_default>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
no-hw-checksum;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
bus-frequency = <400000>;
|
||||
multi-master;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
imux16: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux17: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux18: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux19: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux20: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux21: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux22: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux23: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
multi-master;
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
imux24: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux25: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux26: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux27: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux28: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux29: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux30: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux31: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
imux32: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux33: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux34: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux35: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux36: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux37: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux38: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux39: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
imux40: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux41: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux42: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux43: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
imux44: i2c@4 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <4>;
|
||||
};
|
||||
|
||||
imux45: i2c@5 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <5>;
|
||||
};
|
||||
|
||||
imux46: i2c@6 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <6>;
|
||||
};
|
||||
|
||||
imux47: i2c@7 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -12,6 +12,27 @@
|
|||
aliases {
|
||||
serial0 = &uart1;
|
||||
serial4 = &uart5;
|
||||
|
||||
/*
|
||||
* Hardcode the bus number of i2c switches' channels to
|
||||
* avoid breaking the legacy applications.
|
||||
*/
|
||||
i2c16 = &imux16;
|
||||
i2c17 = &imux17;
|
||||
i2c18 = &imux18;
|
||||
i2c19 = &imux19;
|
||||
i2c20 = &imux20;
|
||||
i2c21 = &imux21;
|
||||
i2c22 = &imux22;
|
||||
i2c23 = &imux23;
|
||||
i2c24 = &imux24;
|
||||
i2c25 = &imux25;
|
||||
i2c26 = &imux26;
|
||||
i2c27 = &imux27;
|
||||
i2c28 = &imux28;
|
||||
i2c29 = &imux29;
|
||||
i2c30 = &imux30;
|
||||
i2c31 = &imux31;
|
||||
};
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
|
|
@ -25,13 +46,9 @@
|
|||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
||||
<&adc 4>, <&adc 5>, <&adc 6>;
|
||||
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
|
||||
};
|
||||
|
||||
iio-hwmon-battery {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 7>;
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
|
|
@ -124,6 +141,215 @@
|
|||
&i2c1 {
|
||||
status = "okay";
|
||||
//X24 Riser
|
||||
i2c-switch@71 {
|
||||
compatible = "nxp,pca9544";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x71>;
|
||||
|
||||
imux16: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
ina230@45 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x45>;
|
||||
};
|
||||
|
||||
tmp75@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
tmp421@49 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
i2c-switch@73 {
|
||||
compatible = "nxp,pca9546";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x73>;
|
||||
|
||||
imux20: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux21: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux22: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux23: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
imux17: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
ina230@45 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x45>;
|
||||
};
|
||||
|
||||
tmp421@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
tmp421@49 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
i2c-switch@73 {
|
||||
compatible = "nxp,pca9546";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x73>;
|
||||
|
||||
imux24: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux25: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux26: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux27: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
imux18: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
ina230@45 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x45>;
|
||||
};
|
||||
|
||||
tmp421@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
tmp421@49 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
i2c-switch@73 {
|
||||
compatible = "nxp,pca9546";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x73>;
|
||||
|
||||
imux28: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
imux29: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
imux30: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
imux31: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
imux19: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
i2c-switch@40 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
i2c-switch@41 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x41>;
|
||||
};
|
||||
|
||||
i2c-switch@45 {
|
||||
compatible = "ti,ina230";
|
||||
reg = <0x45>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
|
|
@ -144,6 +370,42 @@
|
|||
&i2c5 {
|
||||
status = "okay";
|
||||
// CPU Voltage regulators
|
||||
regulator@48 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x48>;
|
||||
};
|
||||
regulator@4a {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x4a>;
|
||||
};
|
||||
regulator@50 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x50>;
|
||||
};
|
||||
regulator@52 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x52>;
|
||||
};
|
||||
regulator@58 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x58>;
|
||||
};
|
||||
regulator@5a {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x5a>;
|
||||
};
|
||||
regulator@68 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x68>;
|
||||
};
|
||||
regulator@70 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x70>;
|
||||
};
|
||||
regulator@72 {
|
||||
compatible = "infineon,pxe1610";
|
||||
reg = <0x72>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
|
|
|
|||
|
|
@ -0,0 +1,149 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2018 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Facebook Wedge 100 BMC";
|
||||
compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
|
||||
|
||||
aliases {
|
||||
/*
|
||||
* Override the default uart aliases to avoid breaking
|
||||
* the legacy applications.
|
||||
*/
|
||||
serial0 = &uart5;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart3;
|
||||
serial3 = &uart4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart3;
|
||||
bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0x40000000 0x20000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
status = "okay";
|
||||
aspeed,reset-type = "system";
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
status = "okay";
|
||||
aspeed,reset-type = "system";
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "fmc0";
|
||||
#include "facebook-bmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd3_default
|
||||
&pinctrl_rxd3_default>;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd4_default
|
||||
&pinctrl_rxd4_default>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
no-hw-checksum;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,141 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2018 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Facebook Wedge 40 BMC";
|
||||
compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
|
||||
|
||||
aliases {
|
||||
/*
|
||||
* Override the default uart aliases to avoid breaking
|
||||
* the legacy applications.
|
||||
*/
|
||||
serial0 = &uart5;
|
||||
serial1 = &uart1;
|
||||
serial2 = &uart3;
|
||||
serial3 = &uart4;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart3;
|
||||
bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0x40000000 0x20000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
status = "okay";
|
||||
aspeed,reset-type = "system";
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "fmc0";
|
||||
#include "facebook-bmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd3_default
|
||||
&pinctrl_rxd3_default>;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd4_default
|
||||
&pinctrl_rxd4_default>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
no-hw-checksum;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -725,9 +725,9 @@
|
|||
reg = <0x58>;
|
||||
};
|
||||
|
||||
power-supply@5a {
|
||||
power-supply@59 {
|
||||
compatible = "pmbus";
|
||||
reg = <0x5a>;
|
||||
reg = <0x59>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,663 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Device Tree file for Lenovo Hr855xg2 platform
|
||||
*
|
||||
* Copyright (C) 2019-present Lenovo
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "HR855XG2 BMC";
|
||||
compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
|
||||
|
||||
aliases {
|
||||
i2c14 = &i2c_riser1;
|
||||
i2c15 = &i2c_riser2;
|
||||
i2c16 = &i2c_riser3;
|
||||
i2c17 = &i2c_M2;
|
||||
i2c18 = &channel_0;
|
||||
i2c19 = &channel_1;
|
||||
i2c20 = &channel_2;
|
||||
i2c21 = &channel_3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
flash_memory: region@98000000 {
|
||||
no-map;
|
||||
reg = <0x98000000 0x00100000>; /* 1M */
|
||||
};
|
||||
|
||||
gfx_memory: framebuffer {
|
||||
size = <0x01000000>;
|
||||
alignment = <0x01000000>;
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
heartbeat {
|
||||
gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fault {
|
||||
gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
||||
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
|
||||
<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
|
||||
<&adc 12>,<&adc 13>,<&adc 14>;
|
||||
};
|
||||
|
||||
iio-hwmon-battery {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 15>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
#include "openbmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&lpc_ctrl {
|
||||
status = "okay";
|
||||
memory-region = <&flash_memory>;
|
||||
flash = <&spi1>;
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
status = "okay";
|
||||
snoop-ports = <0x80>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
/* Rear RS-232 connector */
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd2_default
|
||||
&pinctrl_rxd2_default
|
||||
&pinctrl_nrts2_default
|
||||
&pinctrl_ndtr2_default
|
||||
&pinctrl_ndsr2_default
|
||||
&pinctrl_ncts2_default
|
||||
&pinctrl_ndcd2_default
|
||||
&pinctrl_nri2_default>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ibt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii1_default>;
|
||||
use-ncsi;
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&adc{
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default
|
||||
&pinctrl_adc1_default
|
||||
&pinctrl_adc2_default
|
||||
&pinctrl_adc3_default
|
||||
&pinctrl_adc4_default
|
||||
&pinctrl_adc5_default
|
||||
&pinctrl_adc6_default
|
||||
&pinctrl_adc7_default
|
||||
&pinctrl_adc8_default
|
||||
&pinctrl_adc9_default
|
||||
&pinctrl_adc10_default
|
||||
&pinctrl_adc11_default
|
||||
&pinctrl_adc12_default
|
||||
&pinctrl_adc13_default
|
||||
&pinctrl_adc14_default
|
||||
&pinctrl_adc15_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
i2c_riser1: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
i2c_riser2: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
i2c_riser3: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
i2c_M2: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
bus-frequency = <90000>;
|
||||
HotSwap@10 {
|
||||
compatible = "adm1272";
|
||||
reg = <0x10>;
|
||||
};
|
||||
|
||||
VR@45 {
|
||||
compatible = "pmbus";
|
||||
reg = <0x45>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
i2c-switch@70 {
|
||||
compatible = "nxp,pca9546";
|
||||
reg = <0x70>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel_0: i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
channel_1: i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
channel_2: i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
channel_3: i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
/* temp1 */
|
||||
tmp75@49 {
|
||||
compatible = "national,lm75";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
/* temp2 */
|
||||
tmp75@4d {
|
||||
compatible = "national,lm75";
|
||||
reg = <0x4d>;
|
||||
};
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c256";
|
||||
reg = <0x54>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gfx {
|
||||
status = "okay";
|
||||
memory-region = <&gfx_memory>;
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default
|
||||
&pinctrl_pwm1_default
|
||||
&pinctrl_pwm2_default
|
||||
&pinctrl_pwm3_default
|
||||
&pinctrl_pwm4_default
|
||||
&pinctrl_pwm5_default
|
||||
&pinctrl_pwm6_default
|
||||
&pinctrl_pwm7_default>;
|
||||
|
||||
fan@0 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
fan@1 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
|
||||
};
|
||||
|
||||
fan@2 {
|
||||
reg = <0x01>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
||||
};
|
||||
|
||||
fan@3 {
|
||||
reg = <0x01>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
|
||||
};
|
||||
|
||||
fan@4 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x04>;
|
||||
};
|
||||
|
||||
fan@5 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x05>;
|
||||
};
|
||||
|
||||
fan@6 {
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x06>;
|
||||
};
|
||||
|
||||
fan@7 {
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x07>;
|
||||
};
|
||||
|
||||
fan@8 {
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x08>;
|
||||
};
|
||||
|
||||
fan@9 {
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x09>;
|
||||
};
|
||||
|
||||
fan@10 {
|
||||
reg = <0x05>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
|
||||
};
|
||||
|
||||
fan@11 {
|
||||
reg = <0x05>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
|
||||
};
|
||||
|
||||
fan@12 {
|
||||
reg = <0x06>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
|
||||
};
|
||||
|
||||
fan@13 {
|
||||
reg = <0x06>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
|
||||
};
|
||||
|
||||
fan@14 {
|
||||
reg = <0x07>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
|
||||
};
|
||||
|
||||
fan@15 {
|
||||
reg = <0x07>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
|
||||
};
|
||||
|
||||
fan@16 {
|
||||
reg = <0x07>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
|
||||
pin_gpio_a1 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "BMC_EMMC_RST_N";
|
||||
};
|
||||
|
||||
pin_gpio_a3 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "PCH_PWROK_BMC_FPGA";
|
||||
};
|
||||
|
||||
pin_gpio_b5 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "IRQ_BMC_PCH_SMI_LPC_N";
|
||||
};
|
||||
|
||||
pin_gpio_b7 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
|
||||
output-low;
|
||||
line-name = "CPU_SM_WP";
|
||||
};
|
||||
|
||||
pin_gpio_e0 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "PDB_PSU_SEL";
|
||||
};
|
||||
|
||||
pin_gpio_e2 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "LOCATOR_LED_N";
|
||||
};
|
||||
|
||||
pin_gpio_e5 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "FM_BMC_DBP_PRESENT_R1_N";
|
||||
};
|
||||
|
||||
pin_gpio_e6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_ME_SECURITY_OVERRIDE_N";
|
||||
};
|
||||
|
||||
pin_gpio_f0 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "IRQ_BMC_PCH_NMI_R";
|
||||
};
|
||||
|
||||
pin_gpio_f1 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "CPU2_PROCDIS_BMC_N";
|
||||
};
|
||||
|
||||
pin_gpio_f2 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "RM_THROTTLE_EN_N";
|
||||
};
|
||||
|
||||
pin_gpio_f3 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "FM_PMBUS_ALERT_B_EN";
|
||||
};
|
||||
|
||||
pin_gpio_f4 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_FORCE_NM_THROTTLE_N";
|
||||
};
|
||||
|
||||
pin_gpio_f6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "FM_BMC_CPU_PWR_DEBUG_N";
|
||||
};
|
||||
|
||||
pin_gpio_g7 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_PCIE_I2C_MUX_RST_N";
|
||||
};
|
||||
|
||||
pin_gpio_h6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "FM_BMC_DBP_PRESENT_R2_N";
|
||||
};
|
||||
|
||||
pin_gpio_i3 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "SPI_BMC_BIOS_WP_N";
|
||||
};
|
||||
|
||||
pin_gpio_j1 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_USB_SEL";
|
||||
};
|
||||
|
||||
pin_gpio_j2 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PDB_SMB_RST_N";
|
||||
};
|
||||
|
||||
pin_gpio_j3 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "SPI_BMC_BIOS_HOLD_N";
|
||||
};
|
||||
|
||||
pin_gpio_l0 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PDB_FAN_TACH_SEL";
|
||||
};
|
||||
|
||||
pin_gpio_l1 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "SYS_RESET_BMC_FPGA_N";
|
||||
};
|
||||
|
||||
pin_gpio_l4 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "FM_EFUSE_FAN_G1_EN";
|
||||
};
|
||||
|
||||
pin_gpio_l5 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "FM_EFUSE_FAN_G2_EN";
|
||||
};
|
||||
|
||||
pin_gpio_r6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "CPU3_PROCDIS_BMC_N";
|
||||
};
|
||||
|
||||
pin_gpio_r7 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "CPU4_PROCDIS_BMC_N";
|
||||
};
|
||||
|
||||
pin_gpio_s1 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "DBP_SYSPWROK_BMC";
|
||||
};
|
||||
|
||||
pin_gpio_s2 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "PCH_RST_RSMRST_N";
|
||||
};
|
||||
|
||||
pin_gpio_s6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_HW_STRAP_5";
|
||||
};
|
||||
|
||||
pin_gpio_z3 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "FM_BMC_PCH_SCI_LPC_N";
|
||||
};
|
||||
|
||||
pin_gpio_aa0 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "FW_PSU_ALERT_EN_N";
|
||||
};
|
||||
|
||||
pin_gpio_aa4 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "DBP_CPU_PREQ_N";
|
||||
};
|
||||
|
||||
pin_gpio_ab3 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "BMC_WDTRST";
|
||||
};
|
||||
|
||||
pin_gpio_ac6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "ESPI_BMC_ALERT_N";
|
||||
};
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,918 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/dts-v1/;
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/leds/leds-pca955x.h>
|
||||
|
||||
/ {
|
||||
model = "Mihawk BMC";
|
||||
compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
|
||||
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
bootargs = "console=ttyS4,115200 earlyprintk";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
flash_memory: region@98000000 {
|
||||
no-map;
|
||||
reg = <0x98000000 0x04000000>; /* 64M */
|
||||
};
|
||||
|
||||
gfx_memory: framebuffer {
|
||||
size = <0x01000000>;
|
||||
alignment = <0x01000000>;
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
};
|
||||
|
||||
video_engine_memory: jpegbuffer {
|
||||
size = <0x02000000>;
|
||||
alignment = <0x01000000>;
|
||||
compatible = "shared-dma-pool";
|
||||
reusable;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
air-water {
|
||||
label = "air-water";
|
||||
gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(F, 6)>;
|
||||
};
|
||||
|
||||
checkstop {
|
||||
label = "checkstop";
|
||||
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(J, 2)>;
|
||||
};
|
||||
|
||||
ps0-presence {
|
||||
label = "ps0-presence";
|
||||
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(Z, 2)>;
|
||||
};
|
||||
|
||||
ps1-presence {
|
||||
label = "ps1-presence";
|
||||
gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(Z, 0)>;
|
||||
};
|
||||
id-button {
|
||||
label = "id-button";
|
||||
gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(F, 1)>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <1000>;
|
||||
|
||||
fan0-presence {
|
||||
label = "fan0-presence";
|
||||
gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <9>;
|
||||
};
|
||||
|
||||
fan1-presence {
|
||||
label = "fan1-presence";
|
||||
gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <10>;
|
||||
};
|
||||
|
||||
fan2-presence {
|
||||
label = "fan2-presence";
|
||||
gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <11>;
|
||||
};
|
||||
|
||||
fan3-presence {
|
||||
label = "fan3-presence";
|
||||
gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <12>;
|
||||
};
|
||||
|
||||
fan4-presence {
|
||||
label = "fan4-presence";
|
||||
gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <13>;
|
||||
};
|
||||
|
||||
fan5-presence {
|
||||
label = "fan5-presence";
|
||||
gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <14>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
fault {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rear-id {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rear-g {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rear-ok {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan0 {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan1 {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan2 {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan3 {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan4 {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
fan5 {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
fsi: gpio-fsi {
|
||||
compatible = "fsi-master-gpio", "fsi-master";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
no-gpio-delays;
|
||||
|
||||
clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
|
||||
data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
|
||||
mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
|
||||
trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
iio-hwmon-12v {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>;
|
||||
};
|
||||
|
||||
iio-hwmon-5v {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 1>;
|
||||
};
|
||||
|
||||
iio-hwmon-3v {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 2>;
|
||||
};
|
||||
|
||||
iio-hwmon-vdd0 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 3>;
|
||||
};
|
||||
|
||||
iio-hwmon-vdd1 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 4>;
|
||||
};
|
||||
|
||||
iio-hwmon-vcs0 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 5>;
|
||||
};
|
||||
|
||||
iio-hwmon-vcs1 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 6>;
|
||||
};
|
||||
|
||||
iio-hwmon-vdn0 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 7>;
|
||||
};
|
||||
|
||||
iio-hwmon-vdn1 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 8>;
|
||||
};
|
||||
|
||||
iio-hwmon-vio0 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 9>;
|
||||
};
|
||||
|
||||
iio-hwmon-vio1 {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 10>;
|
||||
};
|
||||
|
||||
iio-hwmon-vddra {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 11>;
|
||||
};
|
||||
|
||||
iio-hwmon-battery {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 12>;
|
||||
};
|
||||
|
||||
iio-hwmon-vddrb {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 13>;
|
||||
};
|
||||
|
||||
iio-hwmon-vddrc {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 14>;
|
||||
};
|
||||
|
||||
iio-hwmon-vddrd {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 15>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
|
||||
&pinctrl_pwm2_default &pinctrl_pwm3_default
|
||||
&pinctrl_pwm4_default &pinctrl_pwm5_default>;
|
||||
|
||||
fan@0 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
fan@1 {
|
||||
reg = <0x01>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
|
||||
};
|
||||
|
||||
fan@2 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
||||
};
|
||||
|
||||
fan@3 {
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
|
||||
};
|
||||
|
||||
fan@4 {
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x04>;
|
||||
};
|
||||
|
||||
fan@5 {
|
||||
reg = <0x05>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x05>;
|
||||
};
|
||||
|
||||
fan@6 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x06>;
|
||||
};
|
||||
|
||||
fan@7 {
|
||||
reg = <0x01>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x07>;
|
||||
};
|
||||
|
||||
fan@8 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x08>;
|
||||
};
|
||||
|
||||
fan@9 {
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x09>;
|
||||
};
|
||||
|
||||
fan@10 {
|
||||
reg = <0x04>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
|
||||
};
|
||||
|
||||
fan@11 {
|
||||
reg = <0x05>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
label = "bmc";
|
||||
m25p,fast-read;
|
||||
spi-max-frequency = <50000000>;
|
||||
partitions {
|
||||
#address-cells = < 1 >;
|
||||
#size-cells = < 1 >;
|
||||
compatible = "fixed-partitions";
|
||||
u-boot@0 {
|
||||
reg = < 0 0x60000 >;
|
||||
label = "u-boot";
|
||||
};
|
||||
u-boot-env@60000 {
|
||||
reg = < 0x60000 0x20000 >;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
obmc-ubi@80000 {
|
||||
reg = < 0x80000 0x1F80000 >;
|
||||
label = "obmc-ubi";
|
||||
};
|
||||
};
|
||||
};
|
||||
flash@1 {
|
||||
status = "okay";
|
||||
label = "alt-bmc";
|
||||
m25p,fast-read;
|
||||
spi-max-frequency = <50000000>;
|
||||
partitions {
|
||||
#address-cells = < 1 >;
|
||||
#size-cells = < 1 >;
|
||||
compatible = "fixed-partitions";
|
||||
u-boot@0 {
|
||||
reg = < 0 0x60000 >;
|
||||
label = "alt-u-boot";
|
||||
};
|
||||
u-boot-env@60000 {
|
||||
reg = < 0x60000 0x20000 >;
|
||||
label = "alt-u-boot-env";
|
||||
};
|
||||
obmc-ubi@80000 {
|
||||
reg = < 0x80000 0x1F80000 >;
|
||||
label = "alt-obmc-ubi";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
label = "pnor";
|
||||
m25p,fast-read;
|
||||
spi-max-frequency = <100000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&lpc_ctrl {
|
||||
status = "okay";
|
||||
memory-region = <&flash_memory>;
|
||||
flash = <&spi1>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
/* Rear RS-232 connector */
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default
|
||||
&pinctrl_nrts1_default
|
||||
&pinctrl_ndtr1_default
|
||||
&pinctrl_ndsr1_default
|
||||
&pinctrl_ncts1_default
|
||||
&pinctrl_ndcd1_default
|
||||
&pinctrl_nri1_default>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
/* APSS */
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii1_default>;
|
||||
use-ncsi;
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
/* SAMTEC P0 */
|
||||
/* SAMTEC P1 */
|
||||
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
|
||||
/* APSS */
|
||||
/* CPLD */
|
||||
|
||||
/* PCA9516 (repeater) ->
|
||||
* CLK Buffer 9FGS9092
|
||||
* CLK Buffer 9DBL0651BKILFT
|
||||
* CLK Buffer 9DBL0651BKILFT
|
||||
* Power Supply 0
|
||||
* Power Supply 1
|
||||
* PCA 9552 LED
|
||||
*/
|
||||
|
||||
power-supply@58 {
|
||||
compatible = "ibm,cffps1";
|
||||
reg = <0x58>;
|
||||
};
|
||||
|
||||
power-supply@5b {
|
||||
compatible = "ibm,cffps1";
|
||||
reg = <0x5b>;
|
||||
};
|
||||
|
||||
pca9552: pca9552@60 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x60>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio@0 {
|
||||
reg = <0>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@1 {
|
||||
reg = <1>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@2 {
|
||||
reg = <2>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@3 {
|
||||
reg = <3>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@4 {
|
||||
reg = <4>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@5 {
|
||||
reg = <5>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@6 {
|
||||
reg = <6>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@7 {
|
||||
reg = <7>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@8 {
|
||||
reg = <8>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@9 {
|
||||
reg = <9>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@10 {
|
||||
reg = <10>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@11 {
|
||||
reg = <11>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@12 {
|
||||
reg = <12>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@13 {
|
||||
reg = <13>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@14 {
|
||||
reg = <14>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
gpio@15 {
|
||||
reg = <15>;
|
||||
type = <PCA955X_TYPE_GPIO>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
/* CP0 VDD & VCS : IR35221 */
|
||||
/* CP0 VDN : IR35221 */
|
||||
/* CP0 VIO : IR38064 */
|
||||
/* CP0 VDDR : PXM1330 */
|
||||
|
||||
ir35221@70 {
|
||||
compatible = "infineon,ir35221";
|
||||
reg = <0x70>;
|
||||
};
|
||||
|
||||
ir35221@72 {
|
||||
compatible = "infineon,ir35221";
|
||||
reg = <0x72>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
|
||||
/* CP0 VDD & VCS : IR35221 */
|
||||
/* CP0 VDN : IR35221 */
|
||||
/* CP0 VIO : IR38064 */
|
||||
/* CP0 VDDR : PXM1330 */
|
||||
|
||||
ir35221@70 {
|
||||
compatible = "infineon,ir35221";
|
||||
reg = <0x70>;
|
||||
};
|
||||
|
||||
ir35221@72 {
|
||||
compatible = "infineon,ir35221";
|
||||
reg = <0x72>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
/* pca9548 -> NVMe1 to 8 */
|
||||
|
||||
pca9548@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
/* pca9548 -> NVMe9 to 16 */
|
||||
|
||||
pca9548@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
|
||||
/* pca9545 Riser ->
|
||||
* PCIe x8 Slot3
|
||||
* PCIe x16 slot4
|
||||
* PCIe x8 slot5
|
||||
* I2C BMC RISER PCA9554
|
||||
* BMC SCL/SDA PCA9554
|
||||
* PCA9554
|
||||
*/
|
||||
|
||||
/* pca9545 ->
|
||||
* PCIe x16 Slot1
|
||||
* PCIe x8 slot2
|
||||
* PEX8748
|
||||
*/
|
||||
|
||||
pca9545riser@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
i2c-mux-idle-disconnect;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pca9545@71 {
|
||||
compatible = "nxp,pca9545";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x71>;
|
||||
|
||||
i2c-mux-idle-disconnect;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
|
||||
/* pca9545 Riser ->
|
||||
* PCIe x8 Slot8
|
||||
* PCIe x16 slot9
|
||||
* PCIe x8 slot10
|
||||
* I2C BMC RISER PCA9554
|
||||
* BMC SCL/SDA PCA9554
|
||||
* PCA9554
|
||||
*/
|
||||
|
||||
/* pca9545 ->
|
||||
* PCIe x16 Slot1
|
||||
* PCIe x8 slot2
|
||||
* PEX8748
|
||||
*/
|
||||
|
||||
pca9545riser@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
i2c-mux-idle-disconnect;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pca9545@71 {
|
||||
compatible = "nxp,pca9545";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x71>;
|
||||
|
||||
i2c-mux-idle-disconnect;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
|
||||
/* TPM */
|
||||
/* RTC RX8900CE */
|
||||
/* FPGA for power sequence */
|
||||
/* TMP275A */
|
||||
/* TMP275A */
|
||||
/* EMC1462 */
|
||||
|
||||
tpm@57 {
|
||||
compatible = "infineon,slb9645tt";
|
||||
reg = <0x57>;
|
||||
};
|
||||
|
||||
rtc@32 {
|
||||
compatible = "epson,rx8900";
|
||||
reg = <0x32>;
|
||||
};
|
||||
|
||||
tmp275@48 {
|
||||
compatible = "ti,tmp275";
|
||||
reg = <0x48>;
|
||||
};
|
||||
|
||||
tmp275@49 {
|
||||
compatible = "ti,tmp275";
|
||||
reg = <0x49>;
|
||||
};
|
||||
|
||||
/* chip emc1462 use emc1403 driver */
|
||||
emc1403@4c {
|
||||
compatible = "smsc,emc1403";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
|
||||
/* pca9545 ->
|
||||
* SAS BP1
|
||||
* SAS BP2
|
||||
* NVMe BP
|
||||
* M.2 riser
|
||||
*/
|
||||
|
||||
pca9545@70 {
|
||||
compatible = "nxp,pca9545";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
i2c@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@2 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <2>;
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
tmp275@48 {
|
||||
compatible = "ti,tmp275";
|
||||
reg = <0x48>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
|
||||
/* pca9548 ->
|
||||
* NVMe BP
|
||||
* NVMe HDD17 to 24
|
||||
*/
|
||||
|
||||
pca9548@70 {
|
||||
compatible = "nxp,pca9548";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x70>;
|
||||
};
|
||||
};
|
||||
|
||||
&vuart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gfx {
|
||||
status = "okay";
|
||||
memory-region = <&gfx_memory>;
|
||||
};
|
||||
|
||||
&adc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default
|
||||
&pinctrl_adc1_default
|
||||
&pinctrl_adc2_default
|
||||
&pinctrl_adc3_default
|
||||
&pinctrl_adc4_default
|
||||
&pinctrl_adc5_default
|
||||
&pinctrl_adc6_default
|
||||
&pinctrl_adc7_default
|
||||
&pinctrl_adc8_default
|
||||
&pinctrl_adc9_default
|
||||
&pinctrl_adc10_default
|
||||
&pinctrl_adc11_default
|
||||
&pinctrl_adc12_default
|
||||
&pinctrl_adc13_default
|
||||
&pinctrl_adc14_default
|
||||
&pinctrl_adc15_default>;
|
||||
};
|
||||
|
||||
&wdt1 {
|
||||
aspeed,reset-type = "none";
|
||||
aspeed,external-signal;
|
||||
aspeed,ext-push-pull;
|
||||
aspeed,ext-active-high;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_wdtrst1_default>;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
aspeed,alt-boot;
|
||||
};
|
||||
|
||||
&ibt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vhub {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&video {
|
||||
status = "okay";
|
||||
memory-region = <&video_engine_memory>;
|
||||
};
|
||||
|
||||
#include "ibm-power9-dual.dtsi"
|
||||
|
||||
|
|
@ -207,8 +207,8 @@
|
|||
#size-cells = <0>;
|
||||
no-gpio-delays;
|
||||
|
||||
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
|
||||
data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
|
||||
clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
|
||||
data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
|
||||
mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
|
||||
trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -494,7 +494,7 @@
|
|||
};
|
||||
|
||||
power-supply@68 {
|
||||
compatible = "ibm,cffps1";
|
||||
compatible = "ibm,cffps2";
|
||||
reg = <0x68>;
|
||||
};
|
||||
|
||||
|
|
@ -504,7 +504,7 @@
|
|||
};
|
||||
|
||||
power-supply@69 {
|
||||
compatible = "ibm,cffps1";
|
||||
compatible = "ibm,cffps2";
|
||||
reg = <0x69>;
|
||||
};
|
||||
|
||||
|
|
@ -963,4 +963,15 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_sd2_default>;
|
||||
};
|
||||
|
||||
#include "ibm-power9-dual.dtsi"
|
||||
|
|
|
|||
|
|
@ -81,6 +81,12 @@
|
|||
label = "bmc";
|
||||
#include "openbmc-flash-layout.dtsi"
|
||||
};
|
||||
|
||||
flash@1 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "alt";
|
||||
};
|
||||
};
|
||||
|
||||
&spi {
|
||||
|
|
@ -222,3 +228,7 @@
|
|||
&vuart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
aspeed,alt-boot;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -67,6 +67,26 @@
|
|||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@1 {
|
||||
reg = < 1 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@2 {
|
||||
reg = < 2 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@3 {
|
||||
reg = < 3 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
flash@4 {
|
||||
reg = < 4 >;
|
||||
compatible = "jedec,spi-nor";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
spi: spi@1e630000 {
|
||||
|
|
@ -192,6 +212,34 @@
|
|||
reg = <0x1e720000 0x8000>; // 32K
|
||||
};
|
||||
|
||||
sdmmc: sd-controller@1e740000 {
|
||||
compatible = "aspeed,ast2400-sd-controller";
|
||||
reg = <0x1e740000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x1e740000 0x10000>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
|
||||
status = "disabled";
|
||||
|
||||
sdhci0: sdhci@100 {
|
||||
compatible = "aspeed,ast2400-sdhci";
|
||||
reg = <0x100 0x100>;
|
||||
interrupts = <26>;
|
||||
sdhci,auto-cmd12;
|
||||
clocks = <&syscon ASPEED_CLK_SDIO>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci1: sdhci@200 {
|
||||
compatible = "aspeed,ast2400-sdhci";
|
||||
reg = <0x200 0x100>;
|
||||
interrupts = <26>;
|
||||
sdhci,auto-cmd12;
|
||||
clocks = <&syscon ASPEED_CLK_SDIO>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio@1e780000 {
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
|
|
|
|||
|
|
@ -267,13 +267,41 @@
|
|||
reg = <0x1e720000 0x9000>; // 36K
|
||||
};
|
||||
|
||||
sdmmc: sd-controller@1e740000 {
|
||||
compatible = "aspeed,ast2500-sd-controller";
|
||||
reg = <0x1e740000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x1e740000 0x10000>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
|
||||
status = "disabled";
|
||||
|
||||
sdhci0: sdhci@100 {
|
||||
compatible = "aspeed,ast2500-sdhci";
|
||||
reg = <0x100 0x100>;
|
||||
interrupts = <26>;
|
||||
sdhci,auto-cmd12;
|
||||
clocks = <&syscon ASPEED_CLK_SDIO>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci1: sdhci@200 {
|
||||
compatible = "aspeed,ast2500-sdhci";
|
||||
reg = <0x200 0x100>;
|
||||
interrupts = <26>;
|
||||
sdhci,auto-cmd12;
|
||||
clocks = <&syscon ASPEED_CLK_SDIO>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gpio: gpio@1e780000 {
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
compatible = "aspeed,ast2500-gpio";
|
||||
reg = <0x1e780000 0x1000>;
|
||||
interrupts = <20>;
|
||||
gpio-ranges = <&pinctrl 0 0 220>;
|
||||
gpio-ranges = <&pinctrl 0 0 232>;
|
||||
clocks = <&syscon ASPEED_CLK_APB>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
@ -1346,6 +1374,11 @@
|
|||
groups = "SDA2";
|
||||
};
|
||||
|
||||
pinctrl_sgpm_default: sgpm_default {
|
||||
function = "SGPM";
|
||||
groups = "SGPM";
|
||||
};
|
||||
|
||||
pinctrl_sgps1_default: sgps1_default {
|
||||
function = "SGPS1";
|
||||
groups = "SGPS1";
|
||||
|
|
|
|||
|
|
@ -14,11 +14,6 @@
|
|||
"atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
aliases {
|
||||
serial0 = &dbgu;
|
||||
serial1 = &usart0;
|
||||
serial2 = &usart1;
|
||||
serial3 = &usart2;
|
||||
serial4 = &usart3;
|
||||
serial5 = &uart0;
|
||||
serial6 = &uart1;
|
||||
};
|
||||
|
|
@ -42,132 +37,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
mmc0: mmc@f0008000 {
|
||||
/* N.B. Aria has no SD card detect (CD), assumed present */
|
||||
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
tcb0: timer@f8008000 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@f8010000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f8014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
pinctrl-0 = <&pinctrl_usart0
|
||||
&pinctrl_usart0_rts
|
||||
&pinctrl_usart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart1: serial@f8020000 {
|
||||
pinctrl-0 = <&pinctrl_usart1
|
||||
/* &pinctrl_usart1_rts */
|
||||
/* &pinctrl_usart1_cts */
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart2: serial@f8024000 {
|
||||
/* cannot activate RTS2+CTS2, clash with
|
||||
* ethernet on PB0 and PB1 */
|
||||
pinctrl-0 = <&pinctrl_usart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart3: serial@f8028000 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8028000 0x200>;
|
||||
interrupts = <8 4 5>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart3
|
||||
/* &pinctrl_usart3_rts */
|
||||
/* &pinctrl_usart3_cts */
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
/*
|
||||
* following can be overwritten by bootloader:
|
||||
* for example u-boot 'ftd set' command
|
||||
*/
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* UART0/1 pins are marked as GPIO on
|
||||
* Aria documentation.
|
||||
* Change to "okay" if you need additional serial ports
|
||||
*/
|
||||
uart0: serial@f8040000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@f8044000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
status = "okay";
|
||||
atmel,adc-channels-used = <0xf>;
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
w1_0 {
|
||||
pinctrl_w1_0: w1_0-0 {
|
||||
atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@600000 {
|
||||
status = "okay";
|
||||
num-ports = <3>;
|
||||
};
|
||||
|
||||
usb1: ehci@700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
|
|
@ -187,3 +56,127 @@
|
|||
pinctrl-0 = <&pinctrl_w1_0>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
status = "okay";
|
||||
atmel,adc-channels-used = <0xf>;
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
/*
|
||||
* following can be overwritten by bootloader:
|
||||
* for example u-boot 'ftd set' command
|
||||
*/
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&mmc0 {
|
||||
/* N.B. Aria has no SD card detect (CD), assumed present */
|
||||
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
w1_0 {
|
||||
pinctrl_w1_0: w1_0-0 {
|
||||
atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcb0 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* UART0/1 pins are marked as GPIO on
|
||||
* Aria documentation.
|
||||
* Change to "okay" if you need additional serial ports
|
||||
*/
|
||||
&uart0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
pinctrl-0 = <&pinctrl_usart0
|
||||
&pinctrl_usart0_rts
|
||||
&pinctrl_usart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
pinctrl-0 = <&pinctrl_usart1
|
||||
/* &pinctrl_usart1_rts */
|
||||
/* &pinctrl_usart1_cts */
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart2 {
|
||||
/* cannot activate RTS2+CTS2, clash with
|
||||
* ethernet on PB0 and PB1 */
|
||||
pinctrl-0 = <&pinctrl_usart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0xf8028000 0x200>;
|
||||
interrupts = <8 4 5>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart3
|
||||
/* &pinctrl_usart3_rts */
|
||||
/* &pinctrl_usart3_cts */
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
num-ports = <3>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -6,14 +6,11 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
#include "at91sam9g25.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Acme Systems Arietta G25";
|
||||
compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
aliases {
|
||||
serial0 = &dbgu;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
|
@ -32,57 +29,9 @@
|
|||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
mmc0: mmc@f0008000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
tcb0: timer@f8008000 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2: gadget@f803c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@600000 {
|
||||
status = "okay";
|
||||
num-ports = <3>;
|
||||
};
|
||||
|
||||
usb1: ehci@700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
arietta_led {
|
||||
label = "arietta_led";
|
||||
gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
|
||||
|
|
@ -90,3 +39,48 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcb0 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
num-ports = <3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -33,122 +33,119 @@
|
|||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
tcb0: timer@f8008000 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
&adc0 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand
|
||||
&pinctrl_ebi_data_0_7>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand-controller {
|
||||
pinctrl-0 = <&pinctrl_nand_oe_we
|
||||
&pinctrl_nand_cs
|
||||
&pinctrl_nand_rb>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand@3 {
|
||||
reg = <0x3 0x0 0x800000>;
|
||||
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
uboot@40000 {
|
||||
label = "u-boot";
|
||||
reg = <0x40000 0x80000>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0: mmc@f0008000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_board_mmc0
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
|
||||
ubootenv@c0000 {
|
||||
label = "U-Boot Env";
|
||||
reg = <0xc0000 0x140000>;
|
||||
};
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f8010000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
mmc0 {
|
||||
pinctrl_board_mmc0: mmc0-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
|
||||
};
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x600000>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
ebi: ebi@10000000 {
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand
|
||||
&pinctrl_ebi_data_0_7>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand_controller: nand-controller {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_nand_oe_we
|
||||
&pinctrl_nand_cs
|
||||
&pinctrl_nand_rb>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@3 {
|
||||
reg = <0x3 0x0 0x800000>;
|
||||
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
uboot@40000 {
|
||||
label = "u-boot";
|
||||
reg = <0x40000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "U-Boot Env";
|
||||
reg = <0xc0000 0x140000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x600000>;
|
||||
};
|
||||
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x0f800000>;
|
||||
};
|
||||
};
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x0f800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_board_mmc0
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
mmc0 {
|
||||
pinctrl_board_mmc0: mmc0-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tcb0 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -17,61 +17,58 @@
|
|||
/ {
|
||||
model = "HCE Cosino Mega 2560";
|
||||
compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
&adc0 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
status = "okay";
|
||||
};
|
||||
&mmc1 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc1_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc1_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
usart1: serial@f8020000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart2: serial@f8024000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: gadget@f803c000 {
|
||||
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mmc1: mmc@f000c000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc1_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc1_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@600000 {
|
||||
status = "okay";
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
|
||||
&pioD 19 GPIO_ACTIVE_LOW
|
||||
&pioD 20 GPIO_ACTIVE_LOW
|
||||
>;
|
||||
};
|
||||
|
||||
usb1: ehci@700000 {
|
||||
status = "okay";
|
||||
};
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
|
||||
&pioD 19 GPIO_ACTIVE_LOW
|
||||
&pioD 20 GPIO_ACTIVE_LOW
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -32,96 +32,6 @@
|
|||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
tcb0: timer@f8008000 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm0: pwm@f8034000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwm0_1
|
||||
&pinctrl_pwm0_pwm1_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@600000 {
|
||||
num-ports = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: ehci@700000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ebi: ebi@10000000 {
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand
|
||||
&pinctrl_ebi_data_0_7>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand_controller: nand-controller {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_nand_oe_we
|
||||
&pinctrl_nand_cs
|
||||
&pinctrl_nand_rb>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@3 {
|
||||
reg = <0x3 0x0 0x800000>;
|
||||
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
bootstrap@0 {
|
||||
label = "bootstrap";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
ubi@20000 {
|
||||
label = "ubi";
|
||||
reg = <0x20000 0x7fe0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@40000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
|
|
@ -130,7 +40,6 @@
|
|||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -172,3 +81,91 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-0 = <&pinctrl_ebi_addr_nand
|
||||
&pinctrl_ebi_data_0_7>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand-controller {
|
||||
pinctrl-0 = <&pinctrl_nand_oe_we
|
||||
&pinctrl_nand_cs
|
||||
&pinctrl_nand_rb>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand@3 {
|
||||
reg = <0x3 0x0 0x800000>;
|
||||
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
bootstrap@0 {
|
||||
label = "bootstrap";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
ubi@20000 {
|
||||
label = "ubi";
|
||||
reg = <0x20000 0x7fe0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwm0_1
|
||||
&pinctrl_pwm0_pwm1_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcb0 {
|
||||
timer@0 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
timer@1 {
|
||||
compatible = "atmel,tcb-timer";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
num-ports = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -40,7 +40,7 @@
|
|||
atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
|
||||
display0: display {
|
||||
display0: panel {
|
||||
bits-per-pixel = <16>;
|
||||
atmel,lcdcon-backlight;
|
||||
atmel,dmacon = <0x1>;
|
||||
|
|
|
|||
|
|
@ -110,7 +110,7 @@
|
|||
display = <&display0>;
|
||||
status = "okay";
|
||||
|
||||
display0: display {
|
||||
display0: panel {
|
||||
bits-per-pixel = <16>;
|
||||
atmel,lcdcon-backlight;
|
||||
atmel,dmacon = <0x1>;
|
||||
|
|
|
|||
|
|
@ -11,22 +11,18 @@
|
|||
/ {
|
||||
model = "Atmel AT91SAM9G15 SoC";
|
||||
compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
pinctrl@fffff400 {
|
||||
atmel,mux-mask = <
|
||||
/* A B C */
|
||||
0xffffffff 0xffe0399f 0x00000000 /* pioA */
|
||||
0x00040000 0x00047e3f 0x00000000 /* pioB */
|
||||
0xfdffffff 0x00000000 0xb83fffff /* pioC */
|
||||
0x003fffff 0x003f8000 0x00000000 /* pioD */
|
||||
>;
|
||||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
atmel,mux-mask = <
|
||||
/* A B C */
|
||||
0xffffffff 0xffe0399f 0x00000000 /* pioA */
|
||||
0x00040000 0x00047e3f 0x00000000 /* pioB */
|
||||
0xfdffffff 0x00000000 0xb83fffff /* pioC */
|
||||
0x003fffff 0x003f8000 0x00000000 /* pioD */
|
||||
>;
|
||||
};
|
||||
|
||||
&pmc {
|
||||
compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,14 +14,6 @@
|
|||
model = "Atmel AT91SAM9G15-EK";
|
||||
compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
hlcdc: hlcdc@f8038000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -38,3 +30,7 @@
|
|||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&hlcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,57 +12,54 @@
|
|||
/ {
|
||||
model = "Atmel AT91SAM9G25-EK";
|
||||
compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
spi0: spi@f0000000 {
|
||||
status = "disabled";
|
||||
};
|
||||
&i2c0 {
|
||||
camera@30 {
|
||||
compatible = "ovti,ov2640";
|
||||
reg = <0x30>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
|
||||
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
|
||||
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
|
||||
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
|
||||
clock-names = "xvclk";
|
||||
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
|
||||
assigned-clock-rates = <25000000>;
|
||||
status = "okay";
|
||||
|
||||
mmc1: mmc@f000c000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c0: i2c@f8010000 {
|
||||
ov2640: camera@30 {
|
||||
compatible = "ovti,ov2640";
|
||||
reg = <0x30>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
|
||||
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
|
||||
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
|
||||
clocks = <&pmc PMC_TYPE_SYSTEM 8>;
|
||||
clock-names = "xvclk";
|
||||
assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
|
||||
assigned-clock-rates = <25000000>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
ov2640_0: endpoint {
|
||||
remote-endpoint = <&isi_0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
isi: isi@f8048000 {
|
||||
status = "okay";
|
||||
port {
|
||||
isi_0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&ov2640_0>;
|
||||
bus-width = <8>;
|
||||
vsync-active = <1>;
|
||||
hsync-active = <1>;
|
||||
};
|
||||
};
|
||||
port {
|
||||
ov2640_0: endpoint {
|
||||
remote-endpoint = <&isi_0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&isi {
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
isi_0: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&ov2640_0>;
|
||||
bus-width = <8>;
|
||||
vsync-active = <1>;
|
||||
hsync-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,19 +14,6 @@
|
|||
model = "Atmel AT91SAM9G35-EK";
|
||||
compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
hlcdc: hlcdc@f8038000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -43,3 +30,12 @@
|
|||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&hlcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -235,7 +235,7 @@
|
|||
display = <&display0>;
|
||||
status = "okay";
|
||||
|
||||
display0: display {
|
||||
display0: panel {
|
||||
bits-per-pixel = <32>;
|
||||
atmel,lcdcon-backlight;
|
||||
atmel,dmacon = <0x1>;
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@
|
|||
display = <&display0>;
|
||||
status = "okay";
|
||||
|
||||
display0: display {
|
||||
display0: panel {
|
||||
bits-per-pixel = <16>;
|
||||
atmel,lcdcon-backlight;
|
||||
atmel,dmacon = <0x1>;
|
||||
|
|
|
|||
|
|
@ -12,28 +12,24 @@
|
|||
/ {
|
||||
model = "Atmel AT91SAM9X25-EK";
|
||||
compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
can1: can@f8004000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f8030000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm0: pwm@f8034000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -13,32 +13,29 @@
|
|||
/ {
|
||||
model = "Atmel AT91SAM9X35-EK";
|
||||
compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
macb0: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
hlcdc: hlcdc@f8038000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
bl_reg: backlight_regulator {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
panel: panel {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
panel_reg: panel_regulator {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&backlight {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&bl_reg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hlcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&panel {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&panel_reg {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -941,7 +941,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
rtc: rtc@fffffeb0 {
|
||||
compatible = "atmel,at91sam9x5-rtc";
|
||||
reg = <0xfffffeb0 0x40>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
|
|
|
|||
|
|
@ -39,109 +39,109 @@
|
|||
#pwm-cells = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
lcd {
|
||||
pinctrl_lcd_base: lcd-base-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
|
||||
AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
|
||||
AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
|
||||
AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
|
||||
AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
|
||||
};
|
||||
|
||||
pinctrl_lcd_pwm: lcd-pwm-0 {
|
||||
atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb444: lcd-rgb-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb565: lcd-rgb-1 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
||||
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
||||
AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
||||
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
||||
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb666: lcd-rgb-2 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
||||
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
||||
AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
||||
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
||||
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
||||
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
|
||||
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb888: lcd-rgb-3 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
||||
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
||||
AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
||||
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
||||
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
||||
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
|
||||
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
|
||||
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
||||
AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
||||
AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
||||
AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
||||
AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
||||
AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
lcd {
|
||||
pinctrl_lcd_base: lcd-base-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */
|
||||
AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */
|
||||
AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */
|
||||
AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */
|
||||
AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */
|
||||
};
|
||||
|
||||
pinctrl_lcd_pwm: lcd-pwm-0 {
|
||||
atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb444: lcd-rgb-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb565: lcd-rgb-1 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
||||
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
||||
AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
||||
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
||||
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb666: lcd-rgb-2 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
||||
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
||||
AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
||||
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
||||
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
||||
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
|
||||
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */
|
||||
};
|
||||
|
||||
pinctrl_lcd_rgb888: lcd-rgb-3 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */
|
||||
AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */
|
||||
AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */
|
||||
AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */
|
||||
AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */
|
||||
AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */
|
||||
AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */
|
||||
AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */
|
||||
AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */
|
||||
AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */
|
||||
AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */
|
||||
AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */
|
||||
AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */
|
||||
AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */
|
||||
AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */
|
||||
AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */
|
||||
AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */
|
||||
AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */
|
||||
AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */
|
||||
AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */
|
||||
AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */
|
||||
AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */
|
||||
AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */
|
||||
AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -9,51 +9,6 @@
|
|||
*/
|
||||
|
||||
/ {
|
||||
ahb {
|
||||
apb {
|
||||
i2c0: i2c@f8010000 {
|
||||
qt1070: keyboard@1b {
|
||||
compatible = "qt1070";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&pioA>;
|
||||
interrupts = <7 0x0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qt1070_irq>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
hlcdc: hlcdc@f8038000 {
|
||||
hlcdc-display-controller {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
|
||||
|
||||
port@0 {
|
||||
hlcdc_panel_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&panel_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
board {
|
||||
pinctrl_qt1070_irq: qt1070_irq {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&hlcdc_pwm 0 50000 0>;
|
||||
|
|
@ -98,3 +53,44 @@
|
|||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
keyboard@1b {
|
||||
compatible = "qt1070";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&pioA>;
|
||||
interrupts = <7 0x0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_qt1070_irq>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&hlcdc {
|
||||
hlcdc-display-controller {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
|
||||
|
||||
port@0 {
|
||||
hlcdc_panel_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&panel_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
board {
|
||||
pinctrl_qt1070_irq: qt1070_irq {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -16,139 +16,6 @@
|
|||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
mmc0: mmc@f0008000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_board_mmc0
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc1: mmc@f000c000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_board_mmc1
|
||||
&pinctrl_mmc1_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc1_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
dbgu: serial@fffff200 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart0: serial@f801c000 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: gadget@f803c000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_board_usb2>;
|
||||
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f8010000 {
|
||||
status = "okay";
|
||||
|
||||
wm8731: wm8731@1a {
|
||||
compatible = "wm8731";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
||||
adc0: adc@f804c000 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
camera_sensor {
|
||||
pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
|
||||
};
|
||||
|
||||
pinctrl_sensor_power: sensor_power-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_sensor_reset: sensor_reset-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0 {
|
||||
pinctrl_board_mmc0: mmc0-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
|
||||
};
|
||||
};
|
||||
|
||||
mmc1 {
|
||||
pinctrl_board_mmc1: mmc1-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
pinctrl_board_usb2: usb2-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@f0000000 {
|
||||
status = "disabled"; /* conflicts with mmc1 */
|
||||
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
|
||||
m25p80@0 {
|
||||
compatible = "atmel,at25df321a";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ssc0: ssc@f0010000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
usb0: ohci@600000 {
|
||||
status = "okay";
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
|
||||
&pioD 19 GPIO_ACTIVE_LOW
|
||||
&pioD 20 GPIO_ACTIVE_LOW
|
||||
>;
|
||||
};
|
||||
|
||||
usb1: ehci@700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "atmel,sam9x5-wm8731-audio";
|
||||
|
||||
|
|
@ -164,3 +31,135 @@
|
|||
atmel,audio-codec = <&wm8731>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
atmel,adc-ts-wires = <4>;
|
||||
atmel,adc-ts-pressure-threshold = <10000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
wm8731: wm8731@1a {
|
||||
compatible = "wm8731";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_board_mmc0
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_board_mmc1
|
||||
&pinctrl_mmc1_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc1_slot0_dat1_3>;
|
||||
status = "okay";
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
camera_sensor {
|
||||
pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* ISI_MCK */
|
||||
};
|
||||
|
||||
pinctrl_sensor_power: sensor_power-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_sensor_reset: sensor_reset-0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
mmc0 {
|
||||
pinctrl_board_mmc0: mmc0-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */
|
||||
};
|
||||
};
|
||||
|
||||
mmc1 {
|
||||
pinctrl_board_mmc1: mmc1-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD14 gpio CD pin pull up and deglitch */
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
pinctrl_board_usb2: usb2-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB16 gpio vbus sense, deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
|
||||
status = "disabled"; /* conflicts with mmc1 */
|
||||
|
||||
m25p80@0 {
|
||||
compatible = "atmel,at25df321a";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&ssc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
|
||||
&pioD 19 GPIO_ACTIVE_LOW
|
||||
&pioD 20 GPIO_ACTIVE_LOW
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_board_usb2>;
|
||||
atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -8,6 +8,11 @@
|
|||
compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Model A+";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -99,6 +104,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
@ -107,6 +114,13 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
|
|
|||
|
|
@ -8,6 +8,11 @@
|
|||
compatible = "raspberrypi,model-a", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Model A";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -94,6 +99,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
@ -102,6 +109,13 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
|
|
|||
|
|
@ -9,6 +9,11 @@
|
|||
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Model B+";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x20000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -101,6 +106,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
@ -109,6 +116,13 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
|
|
|||
|
|
@ -9,6 +9,11 @@
|
|||
compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Model B rev2";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -94,6 +99,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
@ -102,6 +109,13 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
|
|
|||
|
|
@ -9,6 +9,11 @@
|
|||
compatible = "raspberrypi,model-b", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Model B";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -89,6 +94,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
@ -97,6 +104,13 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
|
|
|||
|
|
@ -79,6 +79,15 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
|
|
|||
|
|
@ -10,6 +10,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x20000000>;
|
||||
};
|
||||
|
||||
reg_3v3: fixed-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
|
|
|
|||
|
|
@ -12,6 +12,11 @@
|
|||
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Zero W";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x20000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
/* 8250 auxiliary UART instead of pl011 */
|
||||
stdout-path = "serial1:115200n8";
|
||||
|
|
@ -100,6 +105,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
|
|
@ -116,6 +123,13 @@
|
|||
};
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
|
||||
|
|
|
|||
|
|
@ -12,6 +12,11 @@
|
|||
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Zero";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x20000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -96,6 +101,15 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
|
|
|||
|
|
@ -1,11 +1,6 @@
|
|||
#include <dt-bindings/power/raspberrypi-power.h>
|
||||
|
||||
/ {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
|
|
@ -68,28 +63,10 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_gpio48>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
power-domains = <&power RPI_POWER_DOMAIN_USB>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vec {
|
||||
power-domains = <&power RPI_POWER_DOMAIN_VEC>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -10,6 +10,7 @@
|
|||
model = "Raspberry Pi 2 Model B";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
|
|
@ -105,6 +106,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
@ -113,6 +116,13 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@
|
|||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x20000000>;
|
||||
};
|
||||
|
||||
|
|
@ -117,6 +118,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
|
|
@ -124,6 +125,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm {
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
|
|
@ -125,6 +126,8 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* uart0 communicates with the BT module */
|
||||
|
|
|
|||
|
|
@ -78,6 +78,15 @@
|
|||
|
||||
&hdmi {
|
||||
hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
|
||||
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
|
||||
/ {
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -397,7 +397,7 @@
|
|||
|
||||
uart0: serial@7e201000 {
|
||||
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
|
||||
reg = <0x7e201000 0x1000>;
|
||||
reg = <0x7e201000 0x200>;
|
||||
interrupts = <2 25>;
|
||||
clocks = <&clocks BCM2835_CLOCK_UART>,
|
||||
<&clocks BCM2835_CLOCK_VPU>;
|
||||
|
|
@ -428,7 +428,7 @@
|
|||
|
||||
spi: spi@7e204000 {
|
||||
compatible = "brcm,bcm2835-spi";
|
||||
reg = <0x7e204000 0x1000>;
|
||||
reg = <0x7e204000 0x200>;
|
||||
interrupts = <2 22>;
|
||||
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
||||
dmas = <&dma 6>, <&dma 7>;
|
||||
|
|
@ -440,7 +440,7 @@
|
|||
|
||||
i2c0: i2c@7e205000 {
|
||||
compatible = "brcm,bcm2835-i2c";
|
||||
reg = <0x7e205000 0x1000>;
|
||||
reg = <0x7e205000 0x200>;
|
||||
interrupts = <2 21>;
|
||||
clocks = <&clocks BCM2835_CLOCK_VPU>;
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -281,7 +281,7 @@
|
|||
flash: m25p80@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "m25p64";
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <30000000>;
|
||||
m25p,fast-read;
|
||||
reg = <0>;
|
||||
|
|
|
|||
|
|
@ -25,11 +25,11 @@
|
|||
|
||||
display: display {
|
||||
model = "320x240x4";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <4>;
|
||||
ac-prescale = <17>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 320x240 {
|
||||
hactive = <320>;
|
||||
hback-porch = <0>;
|
||||
|
|
|
|||
|
|
@ -450,8 +450,7 @@
|
|||
};
|
||||
|
||||
adc: adc@126c0000 {
|
||||
compatible = "samsung,exynos3250-adc",
|
||||
"samsung,exynos-adc-v2";
|
||||
compatible = "samsung,exynos3250-adc";
|
||||
reg = <0x126C0000 0x100>;
|
||||
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-names = "adc", "sclk";
|
||||
|
|
|
|||
|
|
@ -377,7 +377,7 @@
|
|||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -386,7 +386,7 @@
|
|||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1456250>;
|
||||
regulator-max-microvolt = <1456250>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -395,7 +395,7 @@
|
|||
buck3_reg: BUCK3 {
|
||||
regulator-name = "vdd_int";
|
||||
regulator-min-microvolt = <875000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -404,7 +404,7 @@
|
|||
buck4_reg: BUCK4 {
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -413,7 +413,7 @@
|
|||
buck5_reg: BUCK5 {
|
||||
regulator-name = "vdd_m12";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -422,7 +422,7 @@
|
|||
buck6_reg: BUCK6 {
|
||||
regulator-name = "vdd12_5m";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -431,7 +431,7 @@
|
|||
buck7_reg: BUCK7 {
|
||||
regulator-name = "pvdd_buck7";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -440,7 +440,7 @@
|
|||
buck8_reg: BUCK8 {
|
||||
regulator-name = "pvdd_buck8";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
|
|
@ -449,7 +449,7 @@
|
|||
buck9_reg: BUCK9 {
|
||||
regulator-name = "vddf28_emmc";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
op_mode = <1>; /* Normal Mode */
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -461,8 +461,8 @@
|
|||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
op_mode = <1>;
|
||||
|
|
@ -543,6 +543,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&mali {
|
||||
mali-supply = <&buck4_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mixer {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -529,6 +529,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&mali {
|
||||
mali-supply = <&buck4_reg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mixer {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -328,6 +328,53 @@
|
|||
iommus = <&sysmmu_rotator>;
|
||||
};
|
||||
|
||||
mali: gpu@11800000 {
|
||||
compatible = "samsung,exynos5250-mali", "arm,mali-t604";
|
||||
reg = <0x11800000 0x5000>;
|
||||
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "job", "mmu", "gpu";
|
||||
clocks = <&clock CLK_G3D>;
|
||||
clock-names = "core";
|
||||
operating-points-v2 = <&gpu_opp_table>;
|
||||
power-domains = <&pd_g3d>;
|
||||
status = "disabled";
|
||||
|
||||
gpu_opp_table: gpu-opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-100000000 {
|
||||
opp-hz = /bits/ 64 <100000000>;
|
||||
opp-microvolt = <925000>;
|
||||
};
|
||||
opp-160000000 {
|
||||
opp-hz = /bits/ 64 <160000000>;
|
||||
opp-microvolt = <925000>;
|
||||
};
|
||||
opp-266000000 {
|
||||
opp-hz = /bits/ 64 <266000000>;
|
||||
opp-microvolt = <1025000>;
|
||||
};
|
||||
opp-350000000 {
|
||||
opp-hz = /bits/ 64 <350000000>;
|
||||
opp-microvolt = <1075000>;
|
||||
};
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <1125000>;
|
||||
};
|
||||
opp-450000000 {
|
||||
opp-hz = /bits/ 64 <450000000>;
|
||||
opp-microvolt = <1150000>;
|
||||
};
|
||||
opp-533000000 {
|
||||
opp-hz = /bits/ 64 <533000000>;
|
||||
opp-microvolt = <1250000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tmu: tmu@10060000 {
|
||||
compatible = "samsung,exynos5250-tmu";
|
||||
reg = <0x10060000 0x100>;
|
||||
|
|
@ -346,6 +393,7 @@
|
|||
clock-names = "sata", "sclk_sata";
|
||||
phys = <&sata_phy>;
|
||||
phy-names = "sata-phy";
|
||||
ports-implemented = <0x1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -440,6 +440,7 @@
|
|||
regulator-name = "vdd_ldo10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -294,11 +294,11 @@
|
|||
label = "MFC";
|
||||
};
|
||||
|
||||
msc_pd: power-domain@10044120 {
|
||||
g3d_pd: power-domain@10044080 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044120 0x20>;
|
||||
reg = <0x10044080 0x20>;
|
||||
#power-domain-cells = <0>;
|
||||
label = "MSC";
|
||||
label = "G3D";
|
||||
};
|
||||
|
||||
disp_pd: power-domain@100440c0 {
|
||||
|
|
@ -315,6 +315,13 @@
|
|||
label = "MAU";
|
||||
};
|
||||
|
||||
msc_pd: power-domain@10044120 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044120 0x20>;
|
||||
#power-domain-cells = <0>;
|
||||
label = "MSC";
|
||||
};
|
||||
|
||||
pinctrl_0: pinctrl@13400000 {
|
||||
compatible = "samsung,exynos5420-pinctrl";
|
||||
reg = <0x13400000 0x1000>;
|
||||
|
|
|
|||
|
|
@ -440,6 +440,7 @@
|
|||
regulator-name = "vdd_ldo10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -131,3 +131,12 @@
|
|||
&mfc {
|
||||
compatible = "samsung,mfc-v8";
|
||||
};
|
||||
|
||||
&soc {
|
||||
cam_pd: power-domain@10045100 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10045100 0x20>;
|
||||
#power-domain-cells = <0>;
|
||||
label = "CAM";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,19200n8";
|
||||
bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
|
|
@ -81,37 +81,10 @@
|
|||
/* 16MB of flash */
|
||||
reg = <0x30000000 0x01000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "RedBoot";
|
||||
reg = <0x00000000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition@20000 {
|
||||
label = "Kernel";
|
||||
reg = <0x00020000 0x00300000>;
|
||||
};
|
||||
partition@320000 {
|
||||
label = "Ramdisk";
|
||||
reg = <0x00320000 0x00600000>;
|
||||
};
|
||||
partition@920000 {
|
||||
label = "Application";
|
||||
reg = <0x00920000 0x00600000>;
|
||||
};
|
||||
partition@f20000 {
|
||||
label = "VCTL";
|
||||
reg = <0x00f20000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition@f40000 {
|
||||
label = "CurConf";
|
||||
reg = <0x00f40000 0x000a0000>;
|
||||
read-only;
|
||||
};
|
||||
partition@fe0000 {
|
||||
label = "FIS directory";
|
||||
reg = <0x00fe0000 0x00020000>;
|
||||
read-only;
|
||||
partitions {
|
||||
compatible = "redboot-fis";
|
||||
/* Eraseblock at 0xfe0000 */
|
||||
fis-index-block = <0x1fc>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@
|
|||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
|
||||
bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
|
|
@ -36,8 +36,8 @@
|
|||
wakeup-source;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
label = "WPS";
|
||||
/* Conflict with NAND flash */
|
||||
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
|
||||
/* Conflicts with TVC and extended flash */
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-setup {
|
||||
|
|
@ -143,54 +143,30 @@
|
|||
/* 16MB of flash */
|
||||
reg = <0x30000000 0x01000000>;
|
||||
|
||||
partition@0 {
|
||||
label = "BOOT";
|
||||
reg = <0x00000000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition@120000 {
|
||||
label = "Kern";
|
||||
reg = <0x00020000 0x00300000>;
|
||||
};
|
||||
partition@320000 {
|
||||
label = "Ramdisk";
|
||||
reg = <0x00320000 0x00600000>;
|
||||
};
|
||||
partition@920000 {
|
||||
label = "Application";
|
||||
reg = <0x00920000 0x00600000>;
|
||||
};
|
||||
partition@f20000 {
|
||||
label = "VCTL";
|
||||
reg = <0x00f20000 0x00020000>;
|
||||
read-only;
|
||||
};
|
||||
partition@f40000 {
|
||||
label = "CurConf";
|
||||
reg = <0x00f40000 0x000a0000>;
|
||||
read-only;
|
||||
};
|
||||
partition@fe0000 {
|
||||
label = "FIS directory";
|
||||
reg = <0x00fe0000 0x00020000>;
|
||||
read-only;
|
||||
partitions {
|
||||
compatible = "redboot-fis";
|
||||
/* Eraseblock at 0xfe0000 */
|
||||
fis-index-block = <0x1fc>;
|
||||
};
|
||||
};
|
||||
|
||||
syscon: syscon@40000000 {
|
||||
pinctrl {
|
||||
/*
|
||||
* gpio0egrp cover line 16 used by HD LED
|
||||
* gpio0fgrp cover line 17, 18 used by wireless LED and reset button
|
||||
* gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
|
||||
* gpio0kgrp cover line 31 used by USB LED
|
||||
* gpio0agrp cover line 0, used by WPS button
|
||||
* gpio0fgrp cover line 16 used by HD LED
|
||||
* gpio0ggrp cover line 17, 18 used by wireless LAN LED and
|
||||
* reset button OR USB ID select on 17 and USB VBUS select
|
||||
* on 18. (Confusing.)
|
||||
* gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
|
||||
*/
|
||||
gpio0_default_pins: pinctrl-gpio0 {
|
||||
mux {
|
||||
function = "gpio0";
|
||||
groups = "gpio0egrp",
|
||||
groups = "gpio0agrp",
|
||||
"gpio0fgrp",
|
||||
"gpio0hgrp";
|
||||
"gpio0ggrp",
|
||||
"gpio0igrp";
|
||||
};
|
||||
};
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -14,8 +14,8 @@
|
|||
bits-per-pixel = <16>;
|
||||
fsl,pcr = <0xcad08b80>;
|
||||
bus-width = <18>;
|
||||
native-mode = <&qvga_timings>;
|
||||
display-timings {
|
||||
native-mode = <&qvga_timings>;
|
||||
qvga_timings: 320x240 {
|
||||
clock-frequency = <6500000>;
|
||||
hactive = <320>;
|
||||
|
|
|
|||
|
|
@ -14,8 +14,8 @@
|
|||
bits-per-pixel = <16>;
|
||||
fsl,pcr = <0xfa208b80>;
|
||||
bus-width = <18>;
|
||||
native-mode = <&dvi_svga_timings>;
|
||||
display-timings {
|
||||
native-mode = <&dvi_svga_timings>;
|
||||
dvi_svga_timings: 800x600 {
|
||||
clock-frequency = <40000000>;
|
||||
hactive = <800>;
|
||||
|
|
|
|||
|
|
@ -14,8 +14,8 @@
|
|||
bits-per-pixel = <16>;
|
||||
fsl,pcr = <0xfa208b80>;
|
||||
bus-width = <18>;
|
||||
native-mode = <&dvi_vga_timings>;
|
||||
display-timings {
|
||||
native-mode = <&dvi_vga_timings>;
|
||||
dvi_vga_timings: 640x480 {
|
||||
clock-frequency = <31250000>;
|
||||
hactive = <640>;
|
||||
|
|
|
|||
|
|
@ -76,8 +76,8 @@
|
|||
bits-per-pixel = <16>;
|
||||
fsl,pcr = <0xfa208b80>;
|
||||
bus-width = <18>;
|
||||
native-mode = <&wvga_timings>;
|
||||
display-timings {
|
||||
native-mode = <&wvga_timings>;
|
||||
wvga_timings: 640x480 {
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
|
|
|
|||
|
|
@ -12,10 +12,10 @@
|
|||
|
||||
display: display {
|
||||
model = "Chimei-LW700AT9003";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <16>; /* non-standard but required */
|
||||
fsl,pcr = <0xfae80083>; /* non-standard but required */
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 800x480 {
|
||||
clock-frequency = <33000033>;
|
||||
hactive = <800>;
|
||||
|
|
|
|||
|
|
@ -11,11 +11,11 @@
|
|||
|
||||
display0: CMO-QVGA {
|
||||
model = "CMO-QVGA";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <16>;
|
||||
fsl,pcr = <0xfad08b80>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 320x240 {
|
||||
clock-frequency = <6500000>;
|
||||
hactive = <320>;
|
||||
|
|
|
|||
|
|
@ -15,10 +15,10 @@
|
|||
|
||||
display: display {
|
||||
model = "Primeview-PD050VL1";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <16>; /* non-standard but required */
|
||||
fsl,pcr = <0xf0c88080>; /* non-standard but required */
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 640x480 {
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
|
|
|
|||
|
|
@ -14,11 +14,11 @@
|
|||
|
||||
display0: LQ035Q7 {
|
||||
model = "Sharp-LQ035Q7";
|
||||
native-mode = <&timing0>;
|
||||
bits-per-pixel = <16>;
|
||||
fsl,pcr = <0xf00080c0>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 240x320 {
|
||||
clock-frequency = <5500000>;
|
||||
hactive = <240>;
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue