diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h
index 3df27f2d5034..7517c3f417af 100644
--- a/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ b/arch/arm/mach-exynos/include/mach/cpufreq.h
@@ -32,3 +32,5 @@ struct exynos_dvfs_info {
 };
 
 extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
+extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *);
+extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *);
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 82f1aa9c3b6f..32d790dd8180 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -7,6 +7,28 @@ config ARM_OMAP2PLUS_CPUFREQ
 	default ARCH_OMAP2PLUS
 	select CPU_FREQ_TABLE
 
+config ARM_S3C2416_CPUFREQ
+	bool "S3C2416 CPU Frequency scaling support"
+	depends on CPU_S3C2416
+	help
+	  This adds the CPUFreq driver for the Samsung S3C2416 and
+	  S3C2450 SoC. The S3C2416 supports changing the rate of the
+	  armdiv clock source and also entering a so called dynamic
+	  voltage scaling mode in which it is possible to reduce the
+	  core voltage of the cpu.
+
+	  If in doubt, say N.
+
+config ARM_S3C2416_CPUFREQ_VCORESCALE
+	bool "Allow voltage scaling for S3C2416 arm core (EXPERIMENTAL)"
+	depends on ARM_S3C2416_CPUFREQ && REGULATOR && EXPERIMENTAL
+	help
+	  Enable CPU voltage scaling when entering the dvs mode.
+	  It uses information gathered through existing hardware and
+	  tests but not documented in any datasheet.
+
+	  If in doubt, say N.
+
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410
@@ -30,6 +52,8 @@ config ARM_EXYNOS_CPUFREQ
 	bool "SAMSUNG EXYNOS SoCs"
 	depends on ARCH_EXYNOS
 	select ARM_EXYNOS4210_CPUFREQ if CPU_EXYNOS4210
+	select ARM_EXYNOS4X12_CPUFREQ if (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+	select ARM_EXYNOS5250_CPUFREQ if SOC_EXYNOS5250
 	default y
 	help
 	  This adds the CPUFreq driver common part for Samsung
@@ -39,6 +63,19 @@ config ARM_EXYNOS_CPUFREQ
 
 config ARM_EXYNOS4210_CPUFREQ
 	bool "Samsung EXYNOS4210"
+	depends on ARCH_EXYNOS
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS4210
 	  SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+	bool "Samsung EXYNOS4X12"
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS4X12
+	  SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+	bool "Samsung EXYNOS5250"
+	help
+	  This adds the CPUFreq driver for Samsung EXYNOS5250
+	  SoC.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index fda94c74eab0..9531fc2eda22 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -40,10 +40,13 @@ obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
 ##################################################################################
 # ARM SoC drivers
 obj-$(CONFIG_UX500_SOC_DB8500)		+= db8500-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS_CPUFREQ)	+= exynos-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ)	+= exynos4210-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ)	+= exynos4x12-cpufreq.o
+obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ)	+= exynos5250-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)     += omap-cpufreq.o
 
 ##################################################################################
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 622013fb7890..7f2f149ae40f 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -126,6 +126,15 @@ static int __init init_cpufreq_transition_notifier_list(void)
 }
 pure_initcall(init_cpufreq_transition_notifier_list);
 
+static int off __read_mostly;
+int cpufreq_disabled(void)
+{
+	return off;
+}
+void disable_cpufreq(void)
+{
+	off = 1;
+}
 static LIST_HEAD(cpufreq_governor_list);
 static DEFINE_MUTEX(cpufreq_governor_mutex);
 
@@ -1441,6 +1450,9 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 {
 	int retval = -EINVAL;
 
+	if (cpufreq_disabled())
+		return -ENODEV;
+
 	pr_debug("target for CPU %u: %u kHz, relation %u\n", policy->cpu,
 		target_freq, relation);
 	if (cpu_online(policy->cpu) && cpufreq_driver->target)
@@ -1549,6 +1561,9 @@ int cpufreq_register_governor(struct cpufreq_governor *governor)
 	if (!governor)
 		return -EINVAL;
 
+	if (cpufreq_disabled())
+		return -ENODEV;
+
 	mutex_lock(&cpufreq_governor_mutex);
 
 	err = -EBUSY;
@@ -1572,6 +1587,9 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor)
 	if (!governor)
 		return;
 
+	if (cpufreq_disabled())
+		return;
+
 #ifdef CONFIG_HOTPLUG_CPU
 	for_each_present_cpu(cpu) {
 		if (cpu_online(cpu))
@@ -1814,6 +1832,9 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 	unsigned long flags;
 	int ret;
 
+	if (cpufreq_disabled())
+		return -ENODEV;
+
 	if (!driver_data || !driver_data->verify || !driver_data->init ||
 	    ((!driver_data->setpolicy) && (!driver_data->target)))
 		return -EINVAL;
@@ -1901,6 +1922,9 @@ static int __init cpufreq_core_init(void)
 {
 	int cpu;
 
+	if (cpufreq_disabled())
+		return -ENODEV;
+
 	for_each_possible_cpu(cpu) {
 		per_cpu(cpufreq_policy_cpu, cpu) = -1;
 		init_rwsem(&per_cpu(cpu_policy_rwsem, cpu));
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index c3e0652520a1..836e9b062e5e 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -257,6 +257,62 @@ show_one(sampling_down_factor, sampling_down_factor);
 show_one(ignore_nice_load, ignore_nice);
 show_one(powersave_bias, powersave_bias);
 
+/**
+ * update_sampling_rate - update sampling rate effective immediately if needed.
+ * @new_rate: new sampling rate
+ *
+ * If new rate is smaller than the old, simply updaing
+ * dbs_tuners_int.sampling_rate might not be appropriate. For example,
+ * if the original sampling_rate was 1 second and the requested new sampling
+ * rate is 10 ms because the user needs immediate reaction from ondemand
+ * governor, but not sure if higher frequency will be required or not,
+ * then, the governor may change the sampling rate too late; up to 1 second
+ * later. Thus, if we are reducing the sampling rate, we need to make the
+ * new value effective immediately.
+ */
+static void update_sampling_rate(unsigned int new_rate)
+{
+	int cpu;
+
+	dbs_tuners_ins.sampling_rate = new_rate
+				     = max(new_rate, min_sampling_rate);
+
+	for_each_online_cpu(cpu) {
+		struct cpufreq_policy *policy;
+		struct cpu_dbs_info_s *dbs_info;
+		unsigned long next_sampling, appointed_at;
+
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy)
+			continue;
+		dbs_info = &per_cpu(od_cpu_dbs_info, policy->cpu);
+		cpufreq_cpu_put(policy);
+
+		mutex_lock(&dbs_info->timer_mutex);
+
+		if (!delayed_work_pending(&dbs_info->work)) {
+			mutex_unlock(&dbs_info->timer_mutex);
+			continue;
+		}
+
+		next_sampling  = jiffies + usecs_to_jiffies(new_rate);
+		appointed_at = dbs_info->work.timer.expires;
+
+
+		if (time_before(next_sampling, appointed_at)) {
+
+			mutex_unlock(&dbs_info->timer_mutex);
+			cancel_delayed_work_sync(&dbs_info->work);
+			mutex_lock(&dbs_info->timer_mutex);
+
+			schedule_delayed_work_on(dbs_info->cpu, &dbs_info->work,
+						 usecs_to_jiffies(new_rate));
+
+		}
+		mutex_unlock(&dbs_info->timer_mutex);
+	}
+}
+
 static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b,
 				   const char *buf, size_t count)
 {
@@ -265,7 +321,7 @@ static ssize_t store_sampling_rate(struct kobject *a, struct attribute *b,
 	ret = sscanf(buf, "%u", &input);
 	if (ret != 1)
 		return -EINVAL;
-	dbs_tuners_ins.sampling_rate = max(input, min_sampling_rate);
+	update_sampling_rate(input);
 	return count;
 }
 
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 5467879ea07d..b243a7ee01f6 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -210,6 +210,8 @@ static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	cpufreq_frequency_table_get_attr(exynos_info->freq_table, policy->cpu);
 
+	locking_frequency = exynos_getspeed(0);
+
 	/* set the transition latency value */
 	policy->cpuinfo.transition_latency = 100000;
 
@@ -252,6 +254,10 @@ static int __init exynos_cpufreq_init(void)
 
 	if (soc_is_exynos4210())
 		ret = exynos4210_cpufreq_init(exynos_info);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		ret = exynos4x12_cpufreq_init(exynos_info);
+	else if (soc_is_exynos5250())
+		ret = exynos5250_cpufreq_init(exynos_info);
 	else
 		pr_err("%s: CPU type not found\n", __func__);
 
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index 065da5b702f1..fb148fa27678 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -121,25 +121,25 @@ static void exynos4210_set_clkdiv(unsigned int div_index)
 
 	tmp = exynos4210_clkdiv_table[div_index].clkdiv;
 
-	__raw_writel(tmp, S5P_CLKDIV_CPU);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STATCPU);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU);
 	} while (tmp & 0x1111111);
 
 	/* Change Divider - CPU1 */
 
-	tmp = __raw_readl(S5P_CLKDIV_CPU1);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
 
 	tmp &= ~((0x7 << 4) | 0x7);
 
 	tmp |= ((clkdiv_cpu1[div_index][0] << 4) |
 		(clkdiv_cpu1[div_index][1] << 0));
 
-	__raw_writel(tmp, S5P_CLKDIV_CPU1);
+	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
 
 	do {
-		tmp = __raw_readl(S5P_CLKDIV_STATCPU1);
+		tmp = __raw_readl(EXYNOS4_CLKDIV_STATCPU1);
 	} while (tmp & 0x11);
 }
 
@@ -151,32 +151,32 @@ static void exynos4210_set_apll(unsigned int index)
 	clk_set_parent(moutcore, mout_mpll);
 
 	do {
-		tmp = (__raw_readl(S5P_CLKMUX_STATCPU)
-			>> S5P_CLKSRC_CPU_MUXCORE_SHIFT);
+		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
 		tmp &= 0x7;
 	} while (tmp != 0x2);
 
 	/* 2. Set APLL Lock time */
-	__raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK);
+	__raw_writel(EXYNOS4_APLL_LOCKTIME, EXYNOS4_APLL_LOCK);
 
 	/* 3. Change PLL PMS values */
-	tmp = __raw_readl(S5P_APLL_CON0);
+	tmp = __raw_readl(EXYNOS4_APLL_CON0);
 	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
 	tmp |= exynos4210_apll_pms_table[index];
-	__raw_writel(tmp, S5P_APLL_CON0);
+	__raw_writel(tmp, EXYNOS4_APLL_CON0);
 
 	/* 4. wait_lock_time */
 	do {
-		tmp = __raw_readl(S5P_APLL_CON0);
-	} while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT)));
+		tmp = __raw_readl(EXYNOS4_APLL_CON0);
+	} while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT)));
 
 	/* 5. MUX_CORE_SEL = APLL */
 	clk_set_parent(moutcore, mout_apll);
 
 	do {
-		tmp = __raw_readl(S5P_CLKMUX_STATCPU);
-		tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK;
-	} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
+		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
+	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
 }
 
 bool exynos4210_pms_change(unsigned int old_index, unsigned int new_index)
@@ -198,10 +198,10 @@ static void exynos4210_set_frequency(unsigned int old_index,
 			exynos4210_set_clkdiv(new_index);
 
 			/* 2. Change just s value in apll m,p,s value */
-			tmp = __raw_readl(S5P_APLL_CON0);
+			tmp = __raw_readl(EXYNOS4_APLL_CON0);
 			tmp &= ~(0x7 << 0);
 			tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
-			__raw_writel(tmp, S5P_APLL_CON0);
+			__raw_writel(tmp, EXYNOS4_APLL_CON0);
 		} else {
 			/* Clock Configuration Procedure */
 			/* 1. Change the system clock divider values */
@@ -212,10 +212,10 @@ static void exynos4210_set_frequency(unsigned int old_index,
 	} else if (old_index < new_index) {
 		if (!exynos4210_pms_change(old_index, new_index)) {
 			/* 1. Change just s value in apll m,p,s value */
-			tmp = __raw_readl(S5P_APLL_CON0);
+			tmp = __raw_readl(EXYNOS4_APLL_CON0);
 			tmp &= ~(0x7 << 0);
 			tmp |= (exynos4210_apll_pms_table[new_index] & 0x7);
-			__raw_writel(tmp, S5P_APLL_CON0);
+			__raw_writel(tmp, EXYNOS4_APLL_CON0);
 
 			/* 2. Change the system clock divider values */
 			exynos4210_set_clkdiv(new_index);
@@ -253,24 +253,24 @@ int exynos4210_cpufreq_init(struct exynos_dvfs_info *info)
 	if (IS_ERR(mout_apll))
 		goto err_mout_apll;
 
-	tmp = __raw_readl(S5P_CLKDIV_CPU);
+	tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
 
 	for (i = L0; i <  CPUFREQ_LEVEL_END; i++) {
-		tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK |
-			S5P_CLKDIV_CPU0_COREM0_MASK |
-			S5P_CLKDIV_CPU0_COREM1_MASK |
-			S5P_CLKDIV_CPU0_PERIPH_MASK |
-			S5P_CLKDIV_CPU0_ATB_MASK |
-			S5P_CLKDIV_CPU0_PCLKDBG_MASK |
-			S5P_CLKDIV_CPU0_APLL_MASK);
+		tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
+			EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
+			EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
+			EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
+			EXYNOS4_CLKDIV_CPU0_ATB_MASK |
+			EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
+			EXYNOS4_CLKDIV_CPU0_APLL_MASK);
 
-		tmp |= ((clkdiv_cpu0[i][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) |
-			(clkdiv_cpu0[i][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) |
-			(clkdiv_cpu0[i][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) |
-			(clkdiv_cpu0[i][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) |
-			(clkdiv_cpu0[i][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) |
-			(clkdiv_cpu0[i][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) |
-			(clkdiv_cpu0[i][6] << S5P_CLKDIV_CPU0_APLL_SHIFT));
+		tmp |= ((clkdiv_cpu0[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+			(clkdiv_cpu0[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+			(clkdiv_cpu0[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+			(clkdiv_cpu0[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+			(clkdiv_cpu0[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+			(clkdiv_cpu0[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+			(clkdiv_cpu0[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
 
 		exynos4210_clkdiv_table[i].clkdiv = tmp;
 	}
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
new file mode 100644
index 000000000000..8c5a7afa5b0b
--- /dev/null
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4X12 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <mach/regs-clock.h>
+#include <mach/cpufreq.h>
+
+#define CPUFREQ_LEVEL_END	(L13 + 1)
+
+static int max_support_idx;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+struct cpufreq_clkdiv {
+	unsigned int	index;
+	unsigned int	clkdiv;
+	unsigned int	clkdiv1;
+};
+
+static unsigned int exynos4x12_volt_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
+	{L0, 1500 * 1000},
+	{L1, 1400 * 1000},
+	{L2, 1300 * 1000},
+	{L3, 1200 * 1000},
+	{L4, 1100 * 1000},
+	{L5, 1000 * 1000},
+	{L6,  900 * 1000},
+	{L7,  800 * 1000},
+	{L8,  700 * 1000},
+	{L9,  600 * 1000},
+	{L10, 500 * 1000},
+	{L11, 400 * 1000},
+	{L12, 300 * 1000},
+	{L13, 200 * 1000},
+	{0, CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_clkdiv exynos4x12_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static unsigned int clkdiv_cpu0_4212[CPUFREQ_LEVEL_END][8] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+	 *		DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+	 */
+	/* ARM L0: 1500 MHz */
+	{ 0, 3, 7, 0, 6, 1, 2, 0 },
+
+	/* ARM L1: 1400 MHz */
+	{ 0, 3, 7, 0, 6, 1, 2, 0 },
+
+	/* ARM L2: 1300 MHz */
+	{ 0, 3, 7, 0, 5, 1, 2, 0 },
+
+	/* ARM L3: 1200 MHz */
+	{ 0, 3, 7, 0, 5, 1, 2, 0 },
+
+	/* ARM L4: 1100 MHz */
+	{ 0, 3, 6, 0, 4, 1, 2, 0 },
+
+	/* ARM L5: 1000 MHz */
+	{ 0, 2, 5, 0, 4, 1, 1, 0 },
+
+	/* ARM L6: 900 MHz */
+	{ 0, 2, 5, 0, 3, 1, 1, 0 },
+
+	/* ARM L7: 800 MHz */
+	{ 0, 2, 5, 0, 3, 1, 1, 0 },
+
+	/* ARM L8: 700 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L9: 600 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L10: 500 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L11: 400 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L12: 300 MHz */
+	{ 0, 2, 4, 0, 2, 1, 1, 0 },
+
+	/* ARM L13: 200 MHz */
+	{ 0, 1, 3, 0, 1, 1, 1, 0 },
+};
+
+static unsigned int clkdiv_cpu0_4412[CPUFREQ_LEVEL_END][8] = {
+	/*
+	 * Clock divider value for following
+	 * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH,
+	 *		DIVATB, DIVPCLK_DBG, DIVAPLL, DIVCORE2 }
+	 */
+	/* ARM L0: 1500 MHz */
+	{ 0, 3, 7, 0, 6, 1, 2, 0 },
+
+	/* ARM L1: 1400 MHz */
+	{ 0, 3, 7, 0, 6, 1, 2, 0 },
+
+	/* ARM L2: 1300 MHz */
+	{ 0, 3, 7, 0, 5, 1, 2, 0 },
+
+	/* ARM L3: 1200 MHz */
+	{ 0, 3, 7, 0, 5, 1, 2, 0 },
+
+	/* ARM L4: 1100 MHz */
+	{ 0, 3, 6, 0, 4, 1, 2, 0 },
+
+	/* ARM L5: 1000 MHz */
+	{ 0, 2, 5, 0, 4, 1, 1, 0 },
+
+	/* ARM L6: 900 MHz */
+	{ 0, 2, 5, 0, 3, 1, 1, 0 },
+
+	/* ARM L7: 800 MHz */
+	{ 0, 2, 5, 0, 3, 1, 1, 0 },
+
+	/* ARM L8: 700 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L9: 600 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L10: 500 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L11: 400 MHz */
+	{ 0, 2, 4, 0, 3, 1, 1, 0 },
+
+	/* ARM L12: 300 MHz */
+	{ 0, 2, 4, 0, 2, 1, 1, 0 },
+
+	/* ARM L13: 200 MHz */
+	{ 0, 1, 3, 0, 1, 1, 1, 0 },
+};
+
+static unsigned int clkdiv_cpu1_4212[CPUFREQ_LEVEL_END][2] = {
+	/* Clock divider value for following
+	 * { DIVCOPY, DIVHPM }
+	 */
+	/* ARM L0: 1500 MHz */
+	{ 6, 0 },
+
+	/* ARM L1: 1400 MHz */
+	{ 6, 0 },
+
+	/* ARM L2: 1300 MHz */
+	{ 5, 0 },
+
+	/* ARM L3: 1200 MHz */
+	{ 5, 0 },
+
+	/* ARM L4: 1100 MHz */
+	{ 4, 0 },
+
+	/* ARM L5: 1000 MHz */
+	{ 4, 0 },
+
+	/* ARM L6: 900 MHz */
+	{ 3, 0 },
+
+	/* ARM L7: 800 MHz */
+	{ 3, 0 },
+
+	/* ARM L8: 700 MHz */
+	{ 3, 0 },
+
+	/* ARM L9: 600 MHz */
+	{ 3, 0 },
+
+	/* ARM L10: 500 MHz */
+	{ 3, 0 },
+
+	/* ARM L11: 400 MHz */
+	{ 3, 0 },
+
+	/* ARM L12: 300 MHz */
+	{ 3, 0 },
+
+	/* ARM L13: 200 MHz */
+	{ 3, 0 },
+};
+
+static unsigned int clkdiv_cpu1_4412[CPUFREQ_LEVEL_END][3] = {
+	/* Clock divider value for following
+	 * { DIVCOPY, DIVHPM, DIVCORES }
+	 */
+	/* ARM L0: 1500 MHz */
+	{ 6, 0, 7 },
+
+	/* ARM L1: 1400 MHz */
+	{ 6, 0, 6 },
+
+	/* ARM L2: 1300 MHz */
+	{ 5, 0, 6 },
+
+	/* ARM L3: 1200 MHz */
+	{ 5, 0, 5 },
+
+	/* ARM L4: 1100 MHz */
+	{ 4, 0, 5 },
+
+	/* ARM L5: 1000 MHz */
+	{ 4, 0, 4 },
+
+	/* ARM L6: 900 MHz */
+	{ 3, 0, 4 },
+
+	/* ARM L7: 800 MHz */
+	{ 3, 0, 3 },
+
+	/* ARM L8: 700 MHz */
+	{ 3, 0, 3 },
+
+	/* ARM L9: 600 MHz */
+	{ 3, 0, 2 },
+
+	/* ARM L10: 500 MHz */
+	{ 3, 0, 2 },
+
+	/* ARM L11: 400 MHz */
+	{ 3, 0, 1 },
+
+	/* ARM L12: 300 MHz */
+	{ 3, 0, 1 },
+
+	/* ARM L13: 200 MHz */
+	{ 3, 0, 0 },
+};
+
+static unsigned int exynos4x12_apll_pms_table[CPUFREQ_LEVEL_END] = {
+	/* APLL FOUT L0: 1500 MHz */
+	((250 << 16) | (4 << 8) | (0x0)),
+
+	/* APLL FOUT L1: 1400 MHz */
+	((175 << 16) | (3 << 8) | (0x0)),
+
+	/* APLL FOUT L2: 1300 MHz */
+	((325 << 16) | (6 << 8) | (0x0)),
+
+	/* APLL FOUT L3: 1200 MHz */
+	((200 << 16) | (4 << 8) | (0x0)),
+
+	/* APLL FOUT L4: 1100 MHz */
+	((275 << 16) | (6 << 8) | (0x0)),
+
+	/* APLL FOUT L5: 1000 MHz */
+	((125 << 16) | (3 << 8) | (0x0)),
+
+	/* APLL FOUT L6: 900 MHz */
+	((150 << 16) | (4 << 8) | (0x0)),
+
+	/* APLL FOUT L7: 800 MHz */
+	((100 << 16) | (3 << 8) | (0x0)),
+
+	/* APLL FOUT L8: 700 MHz */
+	((175 << 16) | (3 << 8) | (0x1)),
+
+	/* APLL FOUT L9: 600 MHz */
+	((200 << 16) | (4 << 8) | (0x1)),
+
+	/* APLL FOUT L10: 500 MHz */
+	((125 << 16) | (3 << 8) | (0x1)),
+
+	/* APLL FOUT L11 400 MHz */
+	((100 << 16) | (3 << 8) | (0x1)),
+
+	/* APLL FOUT L12: 300 MHz */
+	((200 << 16) | (4 << 8) | (0x2)),
+
+	/* APLL FOUT L13: 200 MHz */
+	((100 << 16) | (3 << 8) | (0x2)),
+};
+
+static const unsigned int asv_voltage_4x12[CPUFREQ_LEVEL_END] = {
+	1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500,
+	1000000,  987500,  975000,  950000,  925000,  900000,  900000
+};
+
+static void exynos4x12_set_clkdiv(unsigned int div_index)
+{
+	unsigned int tmp;
+	unsigned int stat_cpu1;
+
+	/* Change Divider - CPU0 */
+
+	tmp = exynos4x12_clkdiv_table[div_index].clkdiv;
+
+	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU);
+
+	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU) & 0x11111111)
+		cpu_relax();
+
+	/* Change Divider - CPU1 */
+	tmp = exynos4x12_clkdiv_table[div_index].clkdiv1;
+
+	__raw_writel(tmp, EXYNOS4_CLKDIV_CPU1);
+	if (soc_is_exynos4212())
+		stat_cpu1 = 0x11;
+	else
+		stat_cpu1 = 0x111;
+
+	while (__raw_readl(EXYNOS4_CLKDIV_STATCPU1) & stat_cpu1)
+		cpu_relax();
+}
+
+static void exynos4x12_set_apll(unsigned int index)
+{
+	unsigned int tmp, pdiv;
+
+	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+	clk_set_parent(moutcore, mout_mpll);
+
+	do {
+		cpu_relax();
+		tmp = (__raw_readl(EXYNOS4_CLKMUX_STATCPU)
+			>> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT);
+		tmp &= 0x7;
+	} while (tmp != 0x2);
+
+	/* 2. Set APLL Lock time */
+	pdiv = ((exynos4x12_apll_pms_table[index] >> 8) & 0x3f);
+
+	__raw_writel((pdiv * 250), EXYNOS4_APLL_LOCK);
+
+	/* 3. Change PLL PMS values */
+	tmp = __raw_readl(EXYNOS4_APLL_CON0);
+	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+	tmp |= exynos4x12_apll_pms_table[index];
+	__raw_writel(tmp, EXYNOS4_APLL_CON0);
+
+	/* 4. wait_lock_time */
+	do {
+		cpu_relax();
+		tmp = __raw_readl(EXYNOS4_APLL_CON0);
+	} while (!(tmp & (0x1 << EXYNOS4_APLLCON0_LOCKED_SHIFT)));
+
+	/* 5. MUX_CORE_SEL = APLL */
+	clk_set_parent(moutcore, mout_apll);
+
+	do {
+		cpu_relax();
+		tmp = __raw_readl(EXYNOS4_CLKMUX_STATCPU);
+		tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK;
+	} while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT));
+}
+
+bool exynos4x12_pms_change(unsigned int old_index, unsigned int new_index)
+{
+	unsigned int old_pm = exynos4x12_apll_pms_table[old_index] >> 8;
+	unsigned int new_pm = exynos4x12_apll_pms_table[new_index] >> 8;
+
+	return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos4x12_set_frequency(unsigned int old_index,
+				  unsigned int new_index)
+{
+	unsigned int tmp;
+
+	if (old_index > new_index) {
+		if (!exynos4x12_pms_change(old_index, new_index)) {
+			/* 1. Change the system clock divider values */
+			exynos4x12_set_clkdiv(new_index);
+			/* 2. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(EXYNOS4_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, EXYNOS4_APLL_CON0);
+
+		} else {
+			/* Clock Configuration Procedure */
+			/* 1. Change the system clock divider values */
+			exynos4x12_set_clkdiv(new_index);
+			/* 2. Change the apll m,p,s value */
+			exynos4x12_set_apll(new_index);
+		}
+	} else if (old_index < new_index) {
+		if (!exynos4x12_pms_change(old_index, new_index)) {
+			/* 1. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(EXYNOS4_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (exynos4x12_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, EXYNOS4_APLL_CON0);
+			/* 2. Change the system clock divider values */
+			exynos4x12_set_clkdiv(new_index);
+		} else {
+			/* Clock Configuration Procedure */
+			/* 1. Change the apll m,p,s value */
+			exynos4x12_set_apll(new_index);
+			/* 2. Change the system clock divider values */
+			exynos4x12_set_clkdiv(new_index);
+		}
+	}
+}
+
+static void __init set_volt_table(void)
+{
+	unsigned int i;
+
+	max_support_idx = L1;
+
+	/* Not supported */
+	exynos4x12_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
+
+	for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
+		exynos4x12_volt_table[i] = asv_voltage_4x12[i];
+}
+
+int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info)
+{
+	int i;
+	unsigned int tmp;
+	unsigned long rate;
+
+	set_volt_table();
+
+	cpu_clk = clk_get(NULL, "armclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	moutcore = clk_get(NULL, "moutcore");
+	if (IS_ERR(moutcore))
+		goto err_moutcore;
+
+	mout_mpll = clk_get(NULL, "mout_mpll");
+	if (IS_ERR(mout_mpll))
+		goto err_mout_mpll;
+
+	rate = clk_get_rate(mout_mpll) / 1000;
+
+	mout_apll = clk_get(NULL, "mout_apll");
+	if (IS_ERR(mout_apll))
+		goto err_mout_apll;
+
+	for (i = L0; i <  CPUFREQ_LEVEL_END; i++) {
+
+		exynos4x12_clkdiv_table[i].index = i;
+
+		tmp = __raw_readl(EXYNOS4_CLKDIV_CPU);
+
+		tmp &= ~(EXYNOS4_CLKDIV_CPU0_CORE_MASK |
+			EXYNOS4_CLKDIV_CPU0_COREM0_MASK |
+			EXYNOS4_CLKDIV_CPU0_COREM1_MASK |
+			EXYNOS4_CLKDIV_CPU0_PERIPH_MASK |
+			EXYNOS4_CLKDIV_CPU0_ATB_MASK |
+			EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK |
+			EXYNOS4_CLKDIV_CPU0_APLL_MASK);
+
+		if (soc_is_exynos4212()) {
+			tmp |= ((clkdiv_cpu0_4212[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+				(clkdiv_cpu0_4212[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+				(clkdiv_cpu0_4212[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+				(clkdiv_cpu0_4212[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+				(clkdiv_cpu0_4212[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+				(clkdiv_cpu0_4212[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+				(clkdiv_cpu0_4212[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT));
+		} else {
+			tmp &= ~EXYNOS4_CLKDIV_CPU0_CORE2_MASK;
+
+			tmp |= ((clkdiv_cpu0_4412[i][0] << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT) |
+				(clkdiv_cpu0_4412[i][1] << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT) |
+				(clkdiv_cpu0_4412[i][2] << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT) |
+				(clkdiv_cpu0_4412[i][3] << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT) |
+				(clkdiv_cpu0_4412[i][4] << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT) |
+				(clkdiv_cpu0_4412[i][5] << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT) |
+				(clkdiv_cpu0_4412[i][6] << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT) |
+				(clkdiv_cpu0_4412[i][7] << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT));
+		}
+
+		exynos4x12_clkdiv_table[i].clkdiv = tmp;
+
+		tmp = __raw_readl(EXYNOS4_CLKDIV_CPU1);
+
+		if (soc_is_exynos4212()) {
+			tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
+				EXYNOS4_CLKDIV_CPU1_HPM_MASK);
+			tmp |= ((clkdiv_cpu1_4212[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
+				(clkdiv_cpu1_4212[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT));
+		} else {
+			tmp &= ~(EXYNOS4_CLKDIV_CPU1_COPY_MASK |
+				EXYNOS4_CLKDIV_CPU1_HPM_MASK |
+				EXYNOS4_CLKDIV_CPU1_CORES_MASK);
+			tmp |= ((clkdiv_cpu1_4412[i][0] << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT) |
+				(clkdiv_cpu1_4412[i][1] << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT) |
+				(clkdiv_cpu1_4412[i][2] << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT));
+		}
+		exynos4x12_clkdiv_table[i].clkdiv1 = tmp;
+	}
+
+	info->mpll_freq_khz = rate;
+	info->pm_lock_idx = L5;
+	info->pll_safe_idx = L7;
+	info->max_support_idx = max_support_idx;
+	info->min_support_idx = min_support_idx;
+	info->cpu_clk = cpu_clk;
+	info->volt_table = exynos4x12_volt_table;
+	info->freq_table = exynos4x12_freq_table;
+	info->set_freq = exynos4x12_set_frequency;
+	info->need_apll_change = exynos4x12_pms_change;
+
+	return 0;
+
+err_mout_apll:
+	clk_put(mout_mpll);
+err_mout_mpll:
+	clk_put(moutcore);
+err_moutcore:
+	clk_put(cpu_clk);
+
+	pr_debug("%s: failed initialization\n", __func__);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(exynos4x12_cpufreq_init);
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
new file mode 100644
index 000000000000..a88331644ebf
--- /dev/null
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright (c) 2010-20122Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS5250 - CPU frequency scaling support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/cpufreq.h>
+
+#define CPUFREQ_LEVEL_END	(L15 + 1)
+
+static int max_support_idx;
+static int min_support_idx = (CPUFREQ_LEVEL_END - 1);
+static struct clk *cpu_clk;
+static struct clk *moutcore;
+static struct clk *mout_mpll;
+static struct clk *mout_apll;
+
+struct cpufreq_clkdiv {
+	unsigned int	index;
+	unsigned int	clkdiv;
+	unsigned int	clkdiv1;
+};
+
+static unsigned int exynos5250_volt_table[CPUFREQ_LEVEL_END];
+
+static struct cpufreq_frequency_table exynos5250_freq_table[] = {
+	{L0, 1700 * 1000},
+	{L1, 1600 * 1000},
+	{L2, 1500 * 1000},
+	{L3, 1400 * 1000},
+	{L4, 1300 * 1000},
+	{L5, 1200 * 1000},
+	{L6, 1100 * 1000},
+	{L7, 1000 * 1000},
+	{L8, 900 * 1000},
+	{L9, 800 * 1000},
+	{L10, 700 * 1000},
+	{L11, 600 * 1000},
+	{L12, 500 * 1000},
+	{L13, 400 * 1000},
+	{L14, 300 * 1000},
+	{L15, 200 * 1000},
+	{0, CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_clkdiv exynos5250_clkdiv_table[CPUFREQ_LEVEL_END];
+
+static unsigned int clkdiv_cpu0_5250[CPUFREQ_LEVEL_END][8] = {
+	/*
+	 * Clock divider value for following
+	 * { ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 }
+	 */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1700 MHz - N/A */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1600 MHz - N/A */
+	{ 0, 3, 7, 7, 5, 1, 3, 0 },	/* 1500 MHz - N/A */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1400 MHz */
+	{ 0, 3, 7, 7, 6, 1, 3, 0 },	/* 1300 MHz */
+	{ 0, 3, 7, 7, 5, 1, 3, 0 },	/* 1200 MHz */
+	{ 0, 2, 7, 7, 5, 1, 2, 0 },	/* 1100 MHz */
+	{ 0, 2, 7, 7, 4, 1, 2, 0 },	/* 1000 MHz */
+	{ 0, 2, 7, 7, 4, 1, 2, 0 },	/* 900 MHz */
+	{ 0, 2, 7, 7, 3, 1, 1, 0 },	/* 800 MHz */
+	{ 0, 1, 7, 7, 3, 1, 1, 0 },	/* 700 MHz */
+	{ 0, 1, 7, 7, 2, 1, 1, 0 },	/* 600 MHz */
+	{ 0, 1, 7, 7, 2, 1, 1, 0 },	/* 500 MHz */
+	{ 0, 1, 7, 7, 1, 1, 1, 0 },	/* 400 MHz */
+	{ 0, 1, 7, 7, 1, 1, 1, 0 },	/* 300 MHz */
+	{ 0, 1, 7, 7, 1, 1, 1, 0 },	/* 200 MHz */
+};
+
+static unsigned int clkdiv_cpu1_5250[CPUFREQ_LEVEL_END][2] = {
+	/* Clock divider value for following
+	 * { COPY, HPM }
+	 */
+	{ 0, 2 },	/* 1700 MHz - N/A */
+	{ 0, 2 },	/* 1600 MHz - N/A */
+	{ 0, 2 },	/* 1500 MHz - N/A */
+	{ 0, 2 },	/* 1400 MHz */
+	{ 0, 2 },	/* 1300 MHz */
+	{ 0, 2 },	/* 1200 MHz */
+	{ 0, 2 },	/* 1100 MHz */
+	{ 0, 2 },	/* 1000 MHz */
+	{ 0, 2 },	/* 900 MHz */
+	{ 0, 2 },	/* 800 MHz */
+	{ 0, 2 },	/* 700 MHz */
+	{ 0, 2 },	/* 600 MHz */
+	{ 0, 2 },	/* 500 MHz */
+	{ 0, 2 },	/* 400 MHz */
+	{ 0, 2 },	/* 300 MHz */
+	{ 0, 2 },	/* 200 MHz */
+};
+
+static unsigned int exynos5_apll_pms_table[CPUFREQ_LEVEL_END] = {
+	(0),				/* 1700 MHz - N/A */
+	(0),				/* 1600 MHz - N/A */
+	(0),				/* 1500 MHz - N/A */
+	(0),				/* 1400 MHz */
+	((325 << 16) | (6 << 8) | 0),	/* 1300 MHz */
+	((200 << 16) | (4 << 8) | 0),	/* 1200 MHz */
+	((275 << 16) | (6 << 8) | 0),	/* 1100 MHz */
+	((125 << 16) | (3 << 8) | 0),	/* 1000 MHz */
+	((150 << 16) | (4 << 8) | 0),	/* 900 MHz */
+	((100 << 16) | (3 << 8) | 0),	/* 800 MHz */
+	((175 << 16) | (3 << 8) | 1),	/* 700 MHz */
+	((200 << 16) | (4 << 8) | 1),	/* 600 MHz */
+	((125 << 16) | (3 << 8) | 1),	/* 500 MHz */
+	((100 << 16) | (3 << 8) | 1),	/* 400 MHz */
+	((200 << 16) | (4 << 8) | 2),	/* 300 MHz */
+	((100 << 16) | (3 << 8) | 2),	/* 200 MHz */
+};
+
+/* ASV group voltage table */
+static const unsigned int asv_voltage_5250[CPUFREQ_LEVEL_END] = {
+	0, 0, 0, 0, 0, 0, 0,	/* 1700 MHz ~ 1100 MHz Not supported */
+	1175000, 1125000, 1075000, 1050000, 1000000,
+	950000, 925000, 925000, 900000
+};
+
+static void set_clkdiv(unsigned int div_index)
+{
+	unsigned int tmp;
+
+	/* Change Divider - CPU0 */
+
+	tmp = exynos5250_clkdiv_table[div_index].clkdiv;
+
+	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU0);
+
+	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU0) & 0x11111111)
+		cpu_relax();
+
+	/* Change Divider - CPU1 */
+	tmp = exynos5250_clkdiv_table[div_index].clkdiv1;
+
+	__raw_writel(tmp, EXYNOS5_CLKDIV_CPU1);
+
+	while (__raw_readl(EXYNOS5_CLKDIV_STATCPU1) & 0x11)
+		cpu_relax();
+}
+
+static void set_apll(unsigned int new_index,
+			     unsigned int old_index)
+{
+	unsigned int tmp, pdiv;
+
+	/* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */
+	clk_set_parent(moutcore, mout_mpll);
+
+	do {
+		cpu_relax();
+		tmp = (__raw_readl(EXYNOS5_CLKMUX_STATCPU) >> 16);
+		tmp &= 0x7;
+	} while (tmp != 0x2);
+
+	/* 2. Set APLL Lock time */
+	pdiv = ((exynos5_apll_pms_table[new_index] >> 8) & 0x3f);
+
+	__raw_writel((pdiv * 250), EXYNOS5_APLL_LOCK);
+
+	/* 3. Change PLL PMS values */
+	tmp = __raw_readl(EXYNOS5_APLL_CON0);
+	tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
+	tmp |= exynos5_apll_pms_table[new_index];
+	__raw_writel(tmp, EXYNOS5_APLL_CON0);
+
+	/* 4. wait_lock_time */
+	do {
+		cpu_relax();
+		tmp = __raw_readl(EXYNOS5_APLL_CON0);
+	} while (!(tmp & (0x1 << 29)));
+
+	/* 5. MUX_CORE_SEL = APLL */
+	clk_set_parent(moutcore, mout_apll);
+
+	do {
+		cpu_relax();
+		tmp = __raw_readl(EXYNOS5_CLKMUX_STATCPU);
+		tmp &= (0x7 << 16);
+	} while (tmp != (0x1 << 16));
+
+}
+
+bool exynos5250_pms_change(unsigned int old_index, unsigned int new_index)
+{
+	unsigned int old_pm = (exynos5_apll_pms_table[old_index] >> 8);
+	unsigned int new_pm = (exynos5_apll_pms_table[new_index] >> 8);
+
+	return (old_pm == new_pm) ? 0 : 1;
+}
+
+static void exynos5250_set_frequency(unsigned int old_index,
+				  unsigned int new_index)
+{
+	unsigned int tmp;
+
+	if (old_index > new_index) {
+		if (!exynos5250_pms_change(old_index, new_index)) {
+			/* 1. Change the system clock divider values */
+			set_clkdiv(new_index);
+			/* 2. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(EXYNOS5_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, EXYNOS5_APLL_CON0);
+
+		} else {
+			/* Clock Configuration Procedure */
+			/* 1. Change the system clock divider values */
+			set_clkdiv(new_index);
+			/* 2. Change the apll m,p,s value */
+			set_apll(new_index, old_index);
+		}
+	} else if (old_index < new_index) {
+		if (!exynos5250_pms_change(old_index, new_index)) {
+			/* 1. Change just s value in apll m,p,s value */
+			tmp = __raw_readl(EXYNOS5_APLL_CON0);
+			tmp &= ~(0x7 << 0);
+			tmp |= (exynos5_apll_pms_table[new_index] & 0x7);
+			__raw_writel(tmp, EXYNOS5_APLL_CON0);
+			/* 2. Change the system clock divider values */
+			set_clkdiv(new_index);
+		} else {
+			/* Clock Configuration Procedure */
+			/* 1. Change the apll m,p,s value */
+			set_apll(new_index, old_index);
+			/* 2. Change the system clock divider values */
+			set_clkdiv(new_index);
+		}
+	}
+}
+
+static void __init set_volt_table(void)
+{
+	unsigned int i;
+
+	exynos5250_freq_table[L0].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L1].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L2].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L3].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L4].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L5].frequency = CPUFREQ_ENTRY_INVALID;
+	exynos5250_freq_table[L6].frequency = CPUFREQ_ENTRY_INVALID;
+
+	max_support_idx = L7;
+
+	for (i = 0 ; i < CPUFREQ_LEVEL_END ; i++)
+		exynos5250_volt_table[i] = asv_voltage_5250[i];
+}
+
+int exynos5250_cpufreq_init(struct exynos_dvfs_info *info)
+{
+	int i;
+	unsigned int tmp;
+	unsigned long rate;
+
+	set_volt_table();
+
+	cpu_clk = clk_get(NULL, "armclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	moutcore = clk_get(NULL, "mout_cpu");
+	if (IS_ERR(moutcore))
+		goto err_moutcore;
+
+	mout_mpll = clk_get(NULL, "mout_mpll");
+	if (IS_ERR(mout_mpll))
+		goto err_mout_mpll;
+
+	rate = clk_get_rate(mout_mpll) / 1000;
+
+	mout_apll = clk_get(NULL, "mout_apll");
+	if (IS_ERR(mout_apll))
+		goto err_mout_apll;
+
+	for (i = L0; i < CPUFREQ_LEVEL_END; i++) {
+
+		exynos5250_clkdiv_table[i].index = i;
+
+		tmp = __raw_readl(EXYNOS5_CLKDIV_CPU0);
+
+		tmp &= ~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) |
+			(0x7 << 12) | (0x7 << 16) | (0x7 << 20) |
+			(0x7 << 24) | (0x7 << 28));
+
+		tmp |= ((clkdiv_cpu0_5250[i][0] << 0) |
+			(clkdiv_cpu0_5250[i][1] << 4) |
+			(clkdiv_cpu0_5250[i][2] << 8) |
+			(clkdiv_cpu0_5250[i][3] << 12) |
+			(clkdiv_cpu0_5250[i][4] << 16) |
+			(clkdiv_cpu0_5250[i][5] << 20) |
+			(clkdiv_cpu0_5250[i][6] << 24) |
+			(clkdiv_cpu0_5250[i][7] << 28));
+
+		exynos5250_clkdiv_table[i].clkdiv = tmp;
+
+		tmp = __raw_readl(EXYNOS5_CLKDIV_CPU1);
+
+		tmp &= ~((0x7 << 0) | (0x7 << 4));
+
+		tmp |= ((clkdiv_cpu1_5250[i][0] << 0) |
+			(clkdiv_cpu1_5250[i][1] << 4));
+
+		exynos5250_clkdiv_table[i].clkdiv1 = tmp;
+	}
+
+	info->mpll_freq_khz = rate;
+	/* 1000Mhz */
+	info->pm_lock_idx = L7;
+	/* 800Mhz */
+	info->pll_safe_idx = L9;
+	info->max_support_idx = max_support_idx;
+	info->min_support_idx = min_support_idx;
+	info->cpu_clk = cpu_clk;
+	info->volt_table = exynos5250_volt_table;
+	info->freq_table = exynos5250_freq_table;
+	info->set_freq = exynos5250_set_frequency;
+	info->need_apll_change = exynos5250_pms_change;
+
+	return 0;
+
+err_mout_apll:
+	clk_put(mout_mpll);
+err_mout_mpll:
+	clk_put(moutcore);
+err_moutcore:
+	clk_put(cpu_clk);
+
+	pr_err("%s: failed initialization\n", __func__);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(exynos5250_cpufreq_init);
diff --git a/drivers/cpufreq/s3c2416-cpufreq.c b/drivers/cpufreq/s3c2416-cpufreq.c
new file mode 100644
index 000000000000..50d2f15a3c8a
--- /dev/null
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -0,0 +1,542 @@
+/*
+ * S3C2416/2450 CPUfreq Support
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on s3c64xx_cpufreq.c
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reboot.h>
+#include <linux/module.h>
+
+static DEFINE_MUTEX(cpufreq_lock);
+
+struct s3c2416_data {
+	struct clk *armdiv;
+	struct clk *armclk;
+	struct clk *hclk;
+
+	unsigned long regulator_latency;
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	struct regulator *vddarm;
+#endif
+
+	struct cpufreq_frequency_table *freq_table;
+
+	bool is_dvs;
+	bool disable_dvs;
+};
+
+static struct s3c2416_data s3c2416_cpufreq;
+
+struct s3c2416_dvfs {
+	unsigned int vddarm_min;
+	unsigned int vddarm_max;
+};
+
+/* pseudo-frequency for dvs mode */
+#define FREQ_DVS	132333
+
+/* frequency to sleep and reboot in
+ * it's essential to leave dvs, as some boards do not reconfigure the
+ * regulator on reboot
+ */
+#define FREQ_SLEEP	133333
+
+/* Sources for the ARMCLK */
+#define SOURCE_HCLK	0
+#define SOURCE_ARMDIV	1
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+/* S3C2416 only supports changing the voltage in the dvs-mode.
+ * Voltages down to 1.0V seem to work, so we take what the regulator
+ * can get us.
+ */
+static struct s3c2416_dvfs s3c2416_dvfs_table[] = {
+	[SOURCE_HCLK] = {  950000, 1250000 },
+	[SOURCE_ARMDIV] = { 1250000, 1350000 },
+};
+#endif
+
+static struct cpufreq_frequency_table s3c2416_freq_table[] = {
+	{ SOURCE_HCLK, FREQ_DVS },
+	{ SOURCE_ARMDIV, 133333 },
+	{ SOURCE_ARMDIV, 266666 },
+	{ SOURCE_ARMDIV, 400000 },
+	{ 0, CPUFREQ_TABLE_END },
+};
+
+static struct cpufreq_frequency_table s3c2450_freq_table[] = {
+	{ SOURCE_HCLK, FREQ_DVS },
+	{ SOURCE_ARMDIV, 133500 },
+	{ SOURCE_ARMDIV, 267000 },
+	{ SOURCE_ARMDIV, 534000 },
+	{ 0, CPUFREQ_TABLE_END },
+};
+
+static int s3c2416_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(policy, s3c_freq->freq_table);
+}
+
+static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+
+	if (cpu != 0)
+		return 0;
+
+	/* return our pseudo-frequency when in dvs mode */
+	if (s3c_freq->is_dvs)
+		return FREQ_DVS;
+
+	return clk_get_rate(s3c_freq->armclk) / 1000;
+}
+
+static int s3c2416_cpufreq_set_armdiv(struct s3c2416_data *s3c_freq,
+				      unsigned int freq)
+{
+	int ret;
+
+	if (clk_get_rate(s3c_freq->armdiv) / 1000 != freq) {
+		ret = clk_set_rate(s3c_freq->armdiv, freq * 1000);
+		if (ret < 0) {
+			pr_err("cpufreq: Failed to set armdiv rate %dkHz: %d\n",
+			       freq, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int s3c2416_cpufreq_enter_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	struct s3c2416_dvfs *dvfs;
+#endif
+	int ret;
+
+	if (s3c_freq->is_dvs) {
+		pr_debug("cpufreq: already in dvs mode, nothing to do\n");
+		return 0;
+	}
+
+	pr_debug("cpufreq: switching armclk to hclk (%lukHz)\n",
+		 clk_get_rate(s3c_freq->hclk) / 1000);
+	ret = clk_set_parent(s3c_freq->armclk, s3c_freq->hclk);
+	if (ret < 0) {
+		pr_err("cpufreq: Failed to switch armclk to hclk: %d\n", ret);
+		return ret;
+	}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	/* changing the core voltage is only allowed when in dvs mode */
+	if (s3c_freq->vddarm) {
+		dvfs = &s3c2416_dvfs_table[idx];
+
+		pr_debug("cpufreq: setting regultor to %d-%d\n",
+			 dvfs->vddarm_min, dvfs->vddarm_max);
+		ret = regulator_set_voltage(s3c_freq->vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+
+		/* when lowering the voltage failed, there is nothing to do */
+		if (ret != 0)
+			pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+	}
+#endif
+
+	s3c_freq->is_dvs = 1;
+
+	return 0;
+}
+
+static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data *s3c_freq, int idx)
+{
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	struct s3c2416_dvfs *dvfs;
+#endif
+	int ret;
+
+	if (!s3c_freq->is_dvs) {
+		pr_debug("cpufreq: not in dvs mode, so can't leave\n");
+		return 0;
+	}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	if (s3c_freq->vddarm) {
+		dvfs = &s3c2416_dvfs_table[idx];
+
+		pr_debug("cpufreq: setting regultor to %d-%d\n",
+			 dvfs->vddarm_min, dvfs->vddarm_max);
+		ret = regulator_set_voltage(s3c_freq->vddarm,
+					    dvfs->vddarm_min,
+					    dvfs->vddarm_max);
+		if (ret != 0) {
+			pr_err("cpufreq: Failed to set VDDARM: %d\n", ret);
+			return ret;
+		}
+	}
+#endif
+
+	/* force armdiv to hclk frequency for transition from dvs*/
+	if (clk_get_rate(s3c_freq->armdiv) > clk_get_rate(s3c_freq->hclk)) {
+		pr_debug("cpufreq: force armdiv to hclk frequency (%lukHz)\n",
+			 clk_get_rate(s3c_freq->hclk) / 1000);
+		ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
+					clk_get_rate(s3c_freq->hclk) / 1000);
+		if (ret < 0) {
+			pr_err("cpufreq: Failed to to set the armdiv to %lukHz: %d\n",
+			       clk_get_rate(s3c_freq->hclk) / 1000, ret);
+			return ret;
+		}
+	}
+
+	pr_debug("cpufreq: switching armclk parent to armdiv (%lukHz)\n",
+			clk_get_rate(s3c_freq->armdiv) / 1000);
+
+	ret = clk_set_parent(s3c_freq->armclk, s3c_freq->armdiv);
+	if (ret < 0) {
+		pr_err("cpufreq: Failed to switch armclk clock parent to armdiv: %d\n",
+		       ret);
+		return ret;
+	}
+
+	s3c_freq->is_dvs = 0;
+
+	return 0;
+}
+
+static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
+				      unsigned int target_freq,
+				      unsigned int relation)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+	struct cpufreq_freqs freqs;
+	int idx, ret, to_dvs = 0;
+	unsigned int i;
+
+	mutex_lock(&cpufreq_lock);
+
+	pr_debug("cpufreq: to %dKHz, relation %d\n", target_freq, relation);
+
+	ret = cpufreq_frequency_table_target(policy, s3c_freq->freq_table,
+					     target_freq, relation, &i);
+	if (ret != 0)
+		goto out;
+
+	idx = s3c_freq->freq_table[i].index;
+
+	if (idx == SOURCE_HCLK)
+		to_dvs = 1;
+
+	/* switching to dvs when it's not allowed */
+	if (to_dvs && s3c_freq->disable_dvs) {
+		pr_debug("cpufreq: entering dvs mode not allowed\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	freqs.cpu = 0;
+	freqs.flags = 0;
+	freqs.old = s3c_freq->is_dvs ? FREQ_DVS
+				     : clk_get_rate(s3c_freq->armclk) / 1000;
+
+	/* When leavin dvs mode, always switch the armdiv to the hclk rate
+	 * The S3C2416 has stability issues when switching directly to
+	 * higher frequencies.
+	 */
+	freqs.new = (s3c_freq->is_dvs && !to_dvs)
+				? clk_get_rate(s3c_freq->hclk) / 1000
+				: s3c_freq->freq_table[i].frequency;
+
+	pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
+
+	if (!to_dvs && freqs.old == freqs.new)
+		goto out;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	if (to_dvs) {
+		pr_debug("cpufreq: enter dvs\n");
+		ret = s3c2416_cpufreq_enter_dvs(s3c_freq, idx);
+	} else if (s3c_freq->is_dvs) {
+		pr_debug("cpufreq: leave dvs\n");
+		ret = s3c2416_cpufreq_leave_dvs(s3c_freq, idx);
+	} else {
+		pr_debug("cpufreq: change armdiv to %dkHz\n", freqs.new);
+		ret = s3c2416_cpufreq_set_armdiv(s3c_freq, freqs.new);
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+out:
+	mutex_unlock(&cpufreq_lock);
+
+	return ret;
+}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
+{
+	int count, v, i, found;
+	struct cpufreq_frequency_table *freq;
+	struct s3c2416_dvfs *dvfs;
+
+	count = regulator_count_voltages(s3c_freq->vddarm);
+	if (count < 0) {
+		pr_err("cpufreq: Unable to check supported voltages\n");
+		return;
+	}
+
+	freq = s3c_freq->freq_table;
+	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
+		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
+			continue;
+
+		dvfs = &s3c2416_dvfs_table[freq->index];
+		found = 0;
+
+		/* Check only the min-voltage, more is always ok on S3C2416 */
+		for (i = 0; i < count; i++) {
+			v = regulator_list_voltage(s3c_freq->vddarm, i);
+			if (v >= dvfs->vddarm_min)
+				found = 1;
+		}
+
+		if (!found) {
+			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
+				 freq->frequency);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		freq++;
+	}
+
+	/* Guessed */
+	s3c_freq->regulator_latency = 1 * 1000 * 1000;
+}
+#endif
+
+static int s3c2416_cpufreq_reboot_notifier_evt(struct notifier_block *this,
+					       unsigned long event, void *ptr)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+	int ret;
+
+	mutex_lock(&cpufreq_lock);
+
+	/* disable further changes */
+	s3c_freq->disable_dvs = 1;
+
+	mutex_unlock(&cpufreq_lock);
+
+	/* some boards don't reconfigure the regulator on reboot, which
+	 * could lead to undervolting the cpu when the clock is reset.
+	 * Therefore we always leave the DVS mode on reboot.
+	 */
+	if (s3c_freq->is_dvs) {
+		pr_debug("cpufreq: leave dvs on reboot\n");
+		ret = cpufreq_driver_target(cpufreq_cpu_get(0), FREQ_SLEEP, 0);
+		if (ret < 0)
+			return NOTIFY_BAD;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
+	.notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
+};
+
+static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
+{
+	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
+	struct cpufreq_frequency_table *freq;
+	struct clk *msysclk;
+	unsigned long rate;
+	int ret;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	msysclk = clk_get(NULL, "msysclk");
+	if (IS_ERR(msysclk)) {
+		ret = PTR_ERR(msysclk);
+		pr_err("cpufreq: Unable to obtain msysclk: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * S3C2416 and S3C2450 share the same processor-ID and also provide no
+	 * other means to distinguish them other than through the rate of
+	 * msysclk. On S3C2416 msysclk runs at 800MHz and on S3C2450 at 533MHz.
+	 */
+	rate = clk_get_rate(msysclk);
+	if (rate == 800 * 1000 * 1000) {
+		pr_info("cpufreq: msysclk running at %lukHz, using S3C2416 frequency table\n",
+			rate / 1000);
+		s3c_freq->freq_table = s3c2416_freq_table;
+		policy->cpuinfo.max_freq = 400000;
+	} else if (rate / 1000 == 534000) {
+		pr_info("cpufreq: msysclk running at %lukHz, using S3C2450 frequency table\n",
+			rate / 1000);
+		s3c_freq->freq_table = s3c2450_freq_table;
+		policy->cpuinfo.max_freq = 534000;
+	}
+
+	/* not needed anymore */
+	clk_put(msysclk);
+
+	if (s3c_freq->freq_table == NULL) {
+		pr_err("cpufreq: No frequency information for this CPU, msysclk at %lukHz\n",
+		       rate / 1000);
+		return -ENODEV;
+	}
+
+	s3c_freq->is_dvs = 0;
+
+	s3c_freq->armdiv = clk_get(NULL, "armdiv");
+	if (IS_ERR(s3c_freq->armdiv)) {
+		ret = PTR_ERR(s3c_freq->armdiv);
+		pr_err("cpufreq: Unable to obtain ARMDIV: %d\n", ret);
+		return ret;
+	}
+
+	s3c_freq->hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(s3c_freq->hclk)) {
+		ret = PTR_ERR(s3c_freq->hclk);
+		pr_err("cpufreq: Unable to obtain HCLK: %d\n", ret);
+		goto err_hclk;
+	}
+
+	/* chech hclk rate, we only support the common 133MHz for now
+	 * hclk could also run at 66MHz, but this not often used
+	 */
+	rate = clk_get_rate(s3c_freq->hclk);
+	if (rate < 133 * 1000 * 1000) {
+		pr_err("cpufreq: HCLK not at 133MHz\n");
+		clk_put(s3c_freq->hclk);
+		ret = -EINVAL;
+		goto err_armclk;
+	}
+
+	s3c_freq->armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(s3c_freq->armclk)) {
+		ret = PTR_ERR(s3c_freq->armclk);
+		pr_err("cpufreq: Unable to obtain ARMCLK: %d\n", ret);
+		goto err_armclk;
+	}
+
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	s3c_freq->vddarm = regulator_get(NULL, "vddarm");
+	if (IS_ERR(s3c_freq->vddarm)) {
+		ret = PTR_ERR(s3c_freq->vddarm);
+		pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
+		goto err_vddarm;
+	}
+
+	s3c2416_cpufreq_cfg_regulator(s3c_freq);
+#else
+	s3c_freq->regulator_latency = 0;
+#endif
+
+	freq = s3c_freq->freq_table;
+	while (freq->frequency != CPUFREQ_TABLE_END) {
+		/* special handling for dvs mode */
+		if (freq->index == 0) {
+			if (!s3c_freq->hclk) {
+				pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
+					 freq->frequency);
+				freq->frequency = CPUFREQ_ENTRY_INVALID;
+			} else {
+				freq++;
+				continue;
+			}
+		}
+
+		/* Check for frequencies we can generate */
+		rate = clk_round_rate(s3c_freq->armdiv,
+				      freq->frequency * 1000);
+		rate /= 1000;
+		if (rate != freq->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
+				 freq->frequency, rate);
+			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		freq++;
+	}
+
+	policy->cur = clk_get_rate(s3c_freq->armclk) / 1000;
+
+	/* Datasheet says PLL stabalisation time must be at least 300us,
+	 * so but add some fudge. (reference in LOCKCON0 register description)
+	 */
+	policy->cpuinfo.transition_latency = (500 * 1000) +
+					     s3c_freq->regulator_latency;
+
+	ret = cpufreq_frequency_table_cpuinfo(policy, s3c_freq->freq_table);
+	if (ret)
+		goto err_freq_table;
+
+	cpufreq_frequency_table_get_attr(s3c_freq->freq_table, 0);
+
+	register_reboot_notifier(&s3c2416_cpufreq_reboot_notifier);
+
+	return 0;
+
+err_freq_table:
+#ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
+	regulator_put(s3c_freq->vddarm);
+err_vddarm:
+#endif
+	clk_put(s3c_freq->armclk);
+err_armclk:
+	clk_put(s3c_freq->hclk);
+err_hclk:
+	clk_put(s3c_freq->armdiv);
+
+	return ret;
+}
+
+static struct freq_attr *s3c2416_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver s3c2416_cpufreq_driver = {
+	.owner		= THIS_MODULE,
+	.flags          = 0,
+	.verify		= s3c2416_cpufreq_verify_speed,
+	.target		= s3c2416_cpufreq_set_target,
+	.get		= s3c2416_cpufreq_get_speed,
+	.init		= s3c2416_cpufreq_driver_init,
+	.name		= "s3c2416",
+	.attr		= s3c2416_cpufreq_attr,
+};
+
+static int __init s3c2416_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s3c2416_cpufreq_driver);
+}
+module_init(s3c2416_cpufreq_init);
diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c b/drivers/cpufreq/s3c64xx-cpufreq.c
index a5e72cb5f53c..6f9490b3c356 100644
--- a/drivers/cpufreq/s3c64xx-cpufreq.c
+++ b/drivers/cpufreq/s3c64xx-cpufreq.c
@@ -217,13 +217,6 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 	} else {
 		s3c64xx_cpufreq_config_regulator();
 	}
-
-	vddint = regulator_get(NULL, "vddint");
-	if (IS_ERR(vddint)) {
-		ret = PTR_ERR(vddint);
-		pr_err("Failed to obtain VDDINT: %d\n", ret);
-		vddint = NULL;
-	}
 #endif
 
 	freq = s3c64xx_freq_table;
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 6216115c7789..8ff442753c75 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -35,6 +35,7 @@
 #ifdef CONFIG_CPU_FREQ
 int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list);
 int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list);
+extern void disable_cpufreq(void);
 #else		/* CONFIG_CPU_FREQ */
 static inline int cpufreq_register_notifier(struct notifier_block *nb,
 						unsigned int list)
@@ -46,6 +47,7 @@ static inline int cpufreq_unregister_notifier(struct notifier_block *nb,
 {
 	return 0;
 }
+static inline void disable_cpufreq(void) { }
 #endif		/* CONFIG_CPU_FREQ */
 
 /* if (cpufreq_driver->target) exists, the ->governor decides what frequency