Merge commit 'v2.6.36-rc5' into sched/core

Merge reason: Pick up the latest fixes in -rc5.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2010-09-21 13:56:43 +02:00
commit cf84fd9632
622 changed files with 7050 additions and 4003 deletions

View File

@ -46,7 +46,6 @@
<sect1><title>Atomic and pointer manipulation</title>
!Iarch/x86/include/asm/atomic.h
!Iarch/x86/include/asm/unaligned.h
</sect1>
<sect1><title>Delaying, scheduling, and timer routines</title>

View File

@ -57,7 +57,6 @@
</para>
<sect1><title>String Conversions</title>
!Ilib/vsprintf.c
!Elib/vsprintf.c
</sect1>
<sect1><title>String Manipulation</title>

View File

@ -1961,6 +1961,12 @@ machines due to caching.
</sect1>
</chapter>
<chapter id="apiref">
<title>Mutex API reference</title>
!Iinclude/linux/mutex.h
!Ekernel/mutex.c
</chapter>
<chapter id="references">
<title>Further reading</title>

View File

@ -104,4 +104,9 @@
<title>Block IO</title>
!Iinclude/trace/events/block.h
</chapter>
<chapter id="workqueue">
<title>Workqueue</title>
!Iinclude/trace/events/workqueue.h
</chapter>
</book>

View File

@ -0,0 +1,45 @@
CFQ ioscheduler tunables
========================
slice_idle
----------
This specifies how long CFQ should idle for next request on certain cfq queues
(for sequential workloads) and service trees (for random workloads) before
queue is expired and CFQ selects next queue to dispatch from.
By default slice_idle is a non-zero value. That means by default we idle on
queues/service trees. This can be very helpful on highly seeky media like
single spindle SATA/SAS disks where we can cut down on overall number of
seeks and see improved throughput.
Setting slice_idle to 0 will remove all the idling on queues/service tree
level and one should see an overall improved throughput on faster storage
devices like multiple SATA/SAS disks in hardware RAID configuration. The down
side is that isolation provided from WRITES also goes down and notion of
IO priority becomes weaker.
So depending on storage and workload, it might be useful to set slice_idle=0.
In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
keeping slice_idle enabled should be useful. For any configurations where
there are multiple spindles behind single LUN (Host based hardware RAID
controller or for storage arrays), setting slice_idle=0 might end up in better
throughput and acceptable latencies.
CFQ IOPS Mode for group scheduling
===================================
Basic CFQ design is to provide priority based time slices. Higher priority
process gets bigger time slice and lower priority process gets smaller time
slice. Measuring time becomes harder if storage is fast and supports NCQ and
it would be better to dispatch multiple requests from multiple cfq queues in
request queue at a time. In such scenario, it is not possible to measure time
consumed by single queue accurately.
What is possible though is to measure number of requests dispatched from a
single queue and also allow dispatch from multiple cfq queue at the same time.
This effectively becomes the fairness in terms of IOPS (IO operations per
second).
If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
to IOPS mode and starts providing fairness in terms of number of requests
dispatched. Note that this mode switching takes effect only for group
scheduling. For non-cgroup users nothing should change.

View File

@ -217,6 +217,7 @@ Details of cgroup files
CFQ sysfs tunable
=================
/sys/block/<disk>/queue/iosched/group_isolation
-----------------------------------------------
If group_isolation=1, it provides stronger isolation between groups at the
expense of throughput. By default group_isolation is 0. In general that
@ -243,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient
and one wants stronger isolation between groups, then set group_isolation=1
but this will come at cost of reduced throughput.
/sys/block/<disk>/queue/iosched/slice_idle
------------------------------------------
On a faster hardware CFQ can be slow, especially with sequential workload.
This happens because CFQ idles on a single queue and single queue might not
drive deeper request queue depths to keep the storage busy. In such scenarios
one can try setting slice_idle=0 and that would switch CFQ to IOPS
(IO operations per second) mode on NCQ supporting hardware.
That means CFQ will not idle between cfq queues of a cfq group and hence be
able to driver higher queue depth and achieve better throughput. That also
means that cfq provides fairness among groups in terms of IOPS and not in
terms of disk time.
/sys/block/<disk>/queue/iosched/group_idle
------------------------------------------
If one disables idling on individual cfq queues and cfq service trees by
setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
on the group in an attempt to provide fairness among groups.
By default group_idle is same as slice_idle and does not do anything if
slice_idle is enabled.
One can experience an overall throughput drop if you have created multiple
groups and put applications in that group which are not driving enough
IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
on individual groups and throughput should improve.
What works
==========
- Currently only sync IO queues are support. All the buffered writes are

View File

@ -109,17 +109,19 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
If you want to initialize a structure with an invalid GPIO number, use
some negative number (perhaps "-EINVAL"); that will never be valid. To
test if a number could reference a GPIO, you may use this predicate:
test if such number from such a structure could reference a GPIO, you
may use this predicate:
int gpio_is_valid(int number);
A number that's not valid will be rejected by calls which may request
or free GPIOs (see below). Other numbers may also be rejected; for
example, a number might be valid but unused on a given board.
Whether a platform supports multiple GPIO controllers is currently a
platform-specific implementation issue.
example, a number might be valid but temporarily unused on a given board.
Whether a platform supports multiple GPIO controllers is a platform-specific
implementation issue, as are whether that support can leave "holes" in the space
of GPIO numbers, and whether new controllers can be added at runtime. Such issues
can affect things including whether adjacent GPIO numbers are both valid.
Using GPIOs
-----------
@ -480,12 +482,16 @@ To support this framework, a platform's Kconfig will "select" either
ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
They may also want to provide a custom value for ARCH_NR_GPIOS.
ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
It may also provide a custom value for ARCH_NR_GPIOS, so that it better
reflects the number of GPIOs in actual use on that platform, without
wasting static table space. (It should count both built-in/SoC GPIOs and
also ones on GPIO expanders.
ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
into the kernel on that architecture.
ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
can enable it and build it into the kernel optionally.
If neither of these options are selected, the platform does not support

View File

@ -91,12 +91,11 @@ name The chip name.
I2C devices get this attribute created automatically.
RO
update_rate The rate at which the chip will update readings.
update_interval The interval at which the chip will update readings.
Unit: millisecond
RW
Some devices have a variable update rate. This attribute
can be used to change the update rate to the desired
frequency.
Some devices have a variable update rate or interval.
This attribute can be used to change it to the desired value.
************

View File

@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
section titled <section title> from <filename>.
Spaces are allowed in <section title>; do not quote the <section title>.
!C<filename> is replaced by nothing, but makes the tools check that
all DOC: sections and documented functions, symbols, etc. are used.
This makes sense to use when you use !F/!P only and want to verify
that all documentation is included.
Tim.
*/ <twaugh@redhat.com>

View File

@ -1974,15 +1974,18 @@ and is between 256 and 4096 characters. It is defined in the file
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
pcie_ports= [PCIE] PCIe ports handling:
auto Ask the BIOS whether or not to use native PCIe services
associated with PCIe ports (PME, hot-plug, AER). Use
them only if that is allowed by the BIOS.
native Use native PCIe services associated with PCIe ports
unconditionally.
compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
ports driver.
pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
Format: {auto|force}[,nomsi]
auto Use native PCIe PME signaling if the BIOS allows the
kernel to control PCIe config registers of root ports.
force Use native PCIe PME signaling even if the BIOS refuses
to allow the kernel to control the relevant PCIe config
registers.
nomsi Do not use MSI for native PCIe PME signaling (this makes
all PCIe root ports use INTx for everything).
all PCIe root ports use INTx for all services).
pcmv= [HW,PCMCIA] BadgePAD 4

View File

@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
mutex semantics are sufficient for your code, then there are a couple
of advantages of mutexes:
- 'struct mutex' is smaller on most architectures: .e.g on x86,
- 'struct mutex' is smaller on most architectures: E.g. on x86,
'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
A smaller structure size means less RAM footprint, and better
CPU-cache utilization.
@ -136,3 +136,4 @@ the APIs of 'struct mutex' have been streamlined:
void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
int mutex_lock_interruptible_nested(struct mutex *lock,
unsigned int subclass);
int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);

View File

@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
current limit is controllable).
(C) 2008 Wolfson Microelectronics PLC.
Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Author: Liam Girdwood <lrg@slimlogic.co.uk>
Nomenclature

View File

@ -296,6 +296,7 @@ Conexant 5051
Conexant 5066
=============
laptop Basic Laptop config (default)
hp-laptop HP laptops, e g G60
dell-laptop Dell laptops
dell-vostro Dell Vostro
olpc-xo-1_5 OLPC XO 1.5

380
Documentation/workqueue.txt Normal file
View File

@ -0,0 +1,380 @@
Concurrency Managed Workqueue (cmwq)
September, 2010 Tejun Heo <tj@kernel.org>
Florian Mickler <florian@mickler.org>
CONTENTS
1. Introduction
2. Why cmwq?
3. The Design
4. Application Programming Interface (API)
5. Example Execution Scenarios
6. Guidelines
1. Introduction
There are many cases where an asynchronous process execution context
is needed and the workqueue (wq) API is the most commonly used
mechanism for such cases.
When such an asynchronous execution context is needed, a work item
describing which function to execute is put on a queue. An
independent thread serves as the asynchronous execution context. The
queue is called workqueue and the thread is called worker.
While there are work items on the workqueue the worker executes the
functions associated with the work items one after the other. When
there is no work item left on the workqueue the worker becomes idle.
When a new work item gets queued, the worker begins executing again.
2. Why cmwq?
In the original wq implementation, a multi threaded (MT) wq had one
worker thread per CPU and a single threaded (ST) wq had one worker
thread system-wide. A single MT wq needed to keep around the same
number of workers as the number of CPUs. The kernel grew a lot of MT
wq users over the years and with the number of CPU cores continuously
rising, some systems saturated the default 32k PID space just booting
up.
Although MT wq wasted a lot of resource, the level of concurrency
provided was unsatisfactory. The limitation was common to both ST and
MT wq albeit less severe on MT. Each wq maintained its own separate
worker pool. A MT wq could provide only one execution context per CPU
while a ST wq one for the whole system. Work items had to compete for
those very limited execution contexts leading to various problems
including proneness to deadlocks around the single execution context.
The tension between the provided level of concurrency and resource
usage also forced its users to make unnecessary tradeoffs like libata
choosing to use ST wq for polling PIOs and accepting an unnecessary
limitation that no two polling PIOs can progress at the same time. As
MT wq don't provide much better concurrency, users which require
higher level of concurrency, like async or fscache, had to implement
their own thread pool.
Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
focus on the following goals.
* Maintain compatibility with the original workqueue API.
* Use per-CPU unified worker pools shared by all wq to provide
flexible level of concurrency on demand without wasting a lot of
resource.
* Automatically regulate worker pool and level of concurrency so that
the API users don't need to worry about such details.
3. The Design
In order to ease the asynchronous execution of functions a new
abstraction, the work item, is introduced.
A work item is a simple struct that holds a pointer to the function
that is to be executed asynchronously. Whenever a driver or subsystem
wants a function to be executed asynchronously it has to set up a work
item pointing to that function and queue that work item on a
workqueue.
Special purpose threads, called worker threads, execute the functions
off of the queue, one after the other. If no work is queued, the
worker threads become idle. These worker threads are managed in so
called thread-pools.
The cmwq design differentiates between the user-facing workqueues that
subsystems and drivers queue work items on and the backend mechanism
which manages thread-pool and processes the queued work items.
The backend is called gcwq. There is one gcwq for each possible CPU
and one gcwq to serve work items queued on unbound workqueues.
Subsystems and drivers can create and queue work items through special
workqueue API functions as they see fit. They can influence some
aspects of the way the work items are executed by setting flags on the
workqueue they are putting the work item on. These flags include
things like CPU locality, reentrancy, concurrency limits and more. To
get a detailed overview refer to the API description of
alloc_workqueue() below.
When a work item is queued to a workqueue, the target gcwq is
determined according to the queue parameters and workqueue attributes
and appended on the shared worklist of the gcwq. For example, unless
specifically overridden, a work item of a bound workqueue will be
queued on the worklist of exactly that gcwq that is associated to the
CPU the issuer is running on.
For any worker pool implementation, managing the concurrency level
(how many execution contexts are active) is an important issue. cmwq
tries to keep the concurrency at a minimal but sufficient level.
Minimal to save resources and sufficient in that the system is used at
its full capacity.
Each gcwq bound to an actual CPU implements concurrency management by
hooking into the scheduler. The gcwq is notified whenever an active
worker wakes up or sleeps and keeps track of the number of the
currently runnable workers. Generally, work items are not expected to
hog a CPU and consume many cycles. That means maintaining just enough
concurrency to prevent work processing from stalling should be
optimal. As long as there are one or more runnable workers on the
CPU, the gcwq doesn't start execution of a new work, but, when the
last running worker goes to sleep, it immediately schedules a new
worker so that the CPU doesn't sit idle while there are pending work
items. This allows using a minimal number of workers without losing
execution bandwidth.
Keeping idle workers around doesn't cost other than the memory space
for kthreads, so cmwq holds onto idle ones for a while before killing
them.
For an unbound wq, the above concurrency management doesn't apply and
the gcwq for the pseudo unbound CPU tries to start executing all work
items as soon as possible. The responsibility of regulating
concurrency level is on the users. There is also a flag to mark a
bound wq to ignore the concurrency management. Please refer to the
API section for details.
Forward progress guarantee relies on that workers can be created when
more execution contexts are necessary, which in turn is guaranteed
through the use of rescue workers. All work items which might be used
on code paths that handle memory reclaim are required to be queued on
wq's that have a rescue-worker reserved for execution under memory
pressure. Else it is possible that the thread-pool deadlocks waiting
for execution contexts to free up.
4. Application Programming Interface (API)
alloc_workqueue() allocates a wq. The original create_*workqueue()
functions are deprecated and scheduled for removal. alloc_workqueue()
takes three arguments - @name, @flags and @max_active. @name is the
name of the wq and also used as the name of the rescuer thread if
there is one.
A wq no longer manages execution resources but serves as a domain for
forward progress guarantee, flush and work item attributes. @flags
and @max_active control how work items are assigned execution
resources, scheduled and executed.
@flags:
WQ_NON_REENTRANT
By default, a wq guarantees non-reentrance only on the same
CPU. A work item may not be executed concurrently on the same
CPU by multiple workers but is allowed to be executed
concurrently on multiple CPUs. This flag makes sure
non-reentrance is enforced across all CPUs. Work items queued
to a non-reentrant wq are guaranteed to be executed by at most
one worker system-wide at any given time.
WQ_UNBOUND
Work items queued to an unbound wq are served by a special
gcwq which hosts workers which are not bound to any specific
CPU. This makes the wq behave as a simple execution context
provider without concurrency management. The unbound gcwq
tries to start execution of work items as soon as possible.
Unbound wq sacrifices locality but is useful for the following
cases.
* Wide fluctuation in the concurrency level requirement is
expected and using bound wq may end up creating large number
of mostly unused workers across different CPUs as the issuer
hops through different CPUs.
* Long running CPU intensive workloads which can be better
managed by the system scheduler.
WQ_FREEZEABLE
A freezeable wq participates in the freeze phase of the system
suspend operations. Work items on the wq are drained and no
new work item starts execution until thawed.
WQ_RESCUER
All wq which might be used in the memory reclaim paths _MUST_
have this flag set. This reserves one worker exclusively for
the execution of this wq under memory pressure.
WQ_HIGHPRI
Work items of a highpri wq are queued at the head of the
worklist of the target gcwq and start execution regardless of
the current concurrency level. In other words, highpri work
items will always start execution as soon as execution
resource is available.
Ordering among highpri work items is preserved - a highpri
work item queued after another highpri work item will start
execution after the earlier highpri work item starts.
Although highpri work items are not held back by other
runnable work items, they still contribute to the concurrency
level. Highpri work items in runnable state will prevent
non-highpri work items from starting execution.
This flag is meaningless for unbound wq.
WQ_CPU_INTENSIVE
Work items of a CPU intensive wq do not contribute to the
concurrency level. In other words, runnable CPU intensive
work items will not prevent other work items from starting
execution. This is useful for bound work items which are
expected to hog CPU cycles so that their execution is
regulated by the system scheduler.
Although CPU intensive work items don't contribute to the
concurrency level, start of their executions is still
regulated by the concurrency management and runnable
non-CPU-intensive work items can delay execution of CPU
intensive work items.
This flag is meaningless for unbound wq.
WQ_HIGHPRI | WQ_CPU_INTENSIVE
This combination makes the wq avoid interaction with
concurrency management completely and behave as a simple
per-CPU execution context provider. Work items queued on a
highpri CPU-intensive wq start execution as soon as resources
are available and don't affect execution of other work items.
@max_active:
@max_active determines the maximum number of execution contexts per
CPU which can be assigned to the work items of a wq. For example,
with @max_active of 16, at most 16 work items of the wq can be
executing at the same time per CPU.
Currently, for a bound wq, the maximum limit for @max_active is 512
and the default value used when 0 is specified is 256. For an unbound
wq, the limit is higher of 512 and 4 * num_possible_cpus(). These
values are chosen sufficiently high such that they are not the
limiting factor while providing protection in runaway cases.
The number of active work items of a wq is usually regulated by the
users of the wq, more specifically, by how many work items the users
may queue at the same time. Unless there is a specific need for
throttling the number of active work items, specifying '0' is
recommended.
Some users depend on the strict execution ordering of ST wq. The
combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
behavior. Work items on such wq are always queued to the unbound gcwq
and only one work item can be active at any given time thus achieving
the same ordering property as ST wq.
5. Example Execution Scenarios
The following example execution scenarios try to illustrate how cmwq
behave under different configurations.
Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
again before finishing. w1 and w2 burn CPU for 5ms then sleep for
10ms.
Ignoring all other tasks, works and processing overhead, and assuming
simple FIFO scheduling, the following is one highly simplified version
of possible sequences of events with the original wq.
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 starts and burns CPU
25 w1 sleeps
35 w1 wakes up and finishes
35 w2 starts and burns CPU
40 w2 sleeps
50 w2 wakes up and finishes
And with cmwq with @max_active >= 3,
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
5 w1 starts and burns CPU
10 w1 sleeps
10 w2 starts and burns CPU
15 w2 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 wakes up and finishes
25 w2 wakes up and finishes
If @max_active == 2,
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
5 w1 starts and burns CPU
10 w1 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 wakes up and finishes
20 w2 starts and burns CPU
25 w2 sleeps
35 w2 wakes up and finishes
Now, let's assume w1 and w2 are queued to a different wq q1 which has
WQ_HIGHPRI set,
TIME IN MSECS EVENT
0 w1 and w2 start and burn CPU
5 w1 sleeps
10 w2 sleeps
10 w0 starts and burns CPU
15 w0 sleeps
15 w1 wakes up and finishes
20 w2 wakes up and finishes
25 w0 wakes up and burns CPU
30 w0 finishes
If q1 has WQ_CPU_INTENSIVE set,
TIME IN MSECS EVENT
0 w0 starts and burns CPU
5 w0 sleeps
5 w1 and w2 start and burn CPU
10 w1 sleeps
15 w2 sleeps
15 w0 wakes up and burns CPU
20 w0 finishes
20 w1 wakes up and finishes
25 w2 wakes up and finishes
6. Guidelines
* Do not forget to use WQ_RESCUER if a wq may process work items which
are used during memory reclaim. Each wq with WQ_RESCUER set has one
rescuer thread reserved for it. If there is dependency among
multiple work items used during memory reclaim, they should be
queued to separate wq each with WQ_RESCUER.
* Unless strict ordering is required, there is no need to use ST wq.
* Unless there is a specific need, using 0 for @max_active is
recommended. In most use cases, concurrency level usually stays
well under the default limit.
* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
flush and work item attributes. Work items which are not involved
in memory reclaim and don't need to be flushed as a part of a group
of work items, and don't require any special attribute, can use one
of the system wq. There is no difference in execution
characteristics between using a dedicated wq and a system wq.
* Unless work items are expected to consume a huge amount of CPU
cycles, using a bound wq is usually beneficial due to the increased
level of locality in wq operations and work item execution.

View File

@ -1135,7 +1135,7 @@ ATLX ETHERNET DRIVERS
M: Jay Cliburn <jcliburn@gmail.com>
M: Chris Snook <chris.snook@gmail.com>
M: Jie Yang <jie.yang@atheros.com>
L: atl1-devel@lists.sourceforge.net
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
S: Maintained
@ -1445,6 +1445,16 @@ S: Maintained
F: Documentation/video4linux/cafe_ccic
F: drivers/media/video/cafe_ccic*
CAIF NETWORK LAYER
M: Sjur Braendeland <sjur.brandeland@stericsson.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/caif/
F: drivers/net/caif/
F: include/linux/caif/
F: include/net/caif/
F: net/caif/
CALGARY x86-64 IOMMU
M: Muli Ben-Yehuda <muli@il.ibm.com>
M: "Jon D. Mason" <jdmason@kudzu.us>
@ -2201,6 +2211,12 @@ L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/hw/ehca/
EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
M: Breno Leitao <leitao@linux.vnet.ibm.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ehea/
EMBEDDED LINUX
M: Paul Gortmaker <paul.gortmaker@windriver.com>
M: Matt Mackall <mpm@selenic.com>
@ -2641,9 +2657,12 @@ S: Maintained
F: drivers/media/video/gspca/
HARDWARE MONITORING
M: Jean Delvare <khali@linux-fr.org>
M: Guenter Roeck <guenter.roeck@ericsson.com>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
S: Orphan
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
S: Maintained
F: Documentation/hwmon/
F: drivers/hwmon/
F: include/linux/hwmon*.h
@ -2781,11 +2800,6 @@ S: Maintained
F: arch/x86/kernel/hpet.c
F: arch/x86/include/asm/hpet.h
HPET: ACPI
M: Bob Picco <bob.picco@hp.com>
S: Maintained
F: drivers/char/hpet.c
HPFS FILESYSTEM
M: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
@ -3398,7 +3412,7 @@ F: drivers/s390/kvm/
KEXEC
M: Eric Biederman <ebiederm@xmission.com>
W: http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
W: http://kernel.org/pub/linux/utils/kernel/kexec/
L: kexec@lists.infradead.org
S: Maintained
F: include/linux/kexec.h
@ -3923,13 +3937,12 @@ F: Documentation/sound/oss/MultiSound
F: sound/oss/msnd*
MULTITECH MULTIPORT CARD (ISICOM)
M: Jiri Slaby <jirislaby@gmail.com>
S: Maintained
S: Orphan
F: drivers/char/isicom.c
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Felipe Balbi <felipe.balbi@nokia.com>
M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/usb/usb.git
S: Maintained
@ -4227,7 +4240,7 @@ S: Maintained
F: drivers/char/hw_random/omap-rng.c
OMAP USB SUPPORT
M: Felipe Balbi <felipe.balbi@nokia.com>
M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
@ -4604,7 +4617,7 @@ F: include/linux/preempt.h
PRISM54 WIRELESS DRIVER
M: "Luis R. Rodriguez" <mcgrof@gmail.com>
L: linux-wireless@vger.kernel.org
W: http://prism54.org
W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete
F: drivers/net/wireless/prism54/
@ -4805,6 +4818,7 @@ RCUTORTURE MODULE
M: Josh Triplett <josh@freedesktop.org>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
S: Supported
T: git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
F: Documentation/RCU/torture.txt
F: kernel/rcutorture.c
@ -4829,6 +4843,7 @@ M: Dipankar Sarma <dipankar@in.ibm.com>
M: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
W: http://www.rdrop.com/users/paulmck/rclock/
S: Supported
T: git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
F: Documentation/RCU/
F: include/linux/rcu*
F: include/linux/srcu*
@ -4836,12 +4851,10 @@ F: kernel/rcu*
F: kernel/srcu*
X: kernel/rcutorture.c
REAL TIME CLOCK DRIVER
REAL TIME CLOCK DRIVER (LEGACY)
M: Paul Gortmaker <p_gortmaker@yahoo.com>
S: Maintained
F: Documentation/rtc.txt
F: drivers/rtc/
F: include/linux/rtc.h
F: drivers/char/rtc.c
REAL TIME CLOCK (RTC) SUBSYSTEM
M: Alessandro Zummo <a.zummo@towertech.it>

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Sheep on Meth
# *DOCUMENTATION*

View File

@ -17,7 +17,6 @@
# define L1_CACHE_SHIFT 5
#endif
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#endif

View File

@ -43,6 +43,8 @@ extern void smp_imb(void);
/* ??? Ought to use this in arch/alpha/kernel/signal.c too. */
#ifndef CONFIG_SMP
#include <linux/sched.h>
extern void __load_new_mm_context(struct mm_struct *);
static inline void
flush_icache_user_range(struct vm_area_struct *vma, struct page *page,

View File

@ -449,10 +449,13 @@
#define __NR_pwritev 491
#define __NR_rt_tgsigqueueinfo 492
#define __NR_perf_event_open 493
#define __NR_fanotify_init 494
#define __NR_fanotify_mark 495
#define __NR_prlimit64 496
#ifdef __KERNEL__
#define NR_SYSCALLS 494
#define NR_SYSCALLS 497
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
@ -463,6 +466,7 @@
#define __ARCH_WANT_SYS_OLD_GETRLIMIT
#define __ARCH_WANT_SYS_OLDUMOUNT
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
/* "Conditional" syscalls. What we want is

View File

@ -317,14 +317,14 @@ ret_from_sys_call:
ldq $0, SP_OFF($sp)
and $0, 8, $0
beq $0, restore_all
ret_from_reschedule:
ret_to_user:
/* Make sure need_resched and sigpending don't change between
sampling and the rti. */
lda $16, 7
call_pal PAL_swpipl
ldl $5, TI_FLAGS($8)
and $5, _TIF_WORK_MASK, $2
bne $5, work_pending
bne $2, work_pending
restore_all:
RESTORE_ALL
call_pal PAL_rti
@ -363,7 +363,7 @@ $ret_success:
* $8: current.
* $19: The old syscall number, or zero if this is not a return
* from a syscall that errored and is possibly restartable.
* $20: Error indication.
* $20: The old a3 value
*/
.align 4
@ -392,12 +392,18 @@ $work_resched:
$work_notifysig:
mov $sp, $16
br $1, do_switch_stack
bsr $1, do_switch_stack
mov $sp, $17
mov $5, $18
mov $19, $9 /* save old syscall number */
mov $20, $10 /* save old a3 */
and $5, _TIF_SIGPENDING, $2
cmovne $2, 0, $9 /* we don't want double syscall restarts */
jsr $26, do_notify_resume
mov $9, $19
mov $10, $20
bsr $1, undo_switch_stack
br restore_all
br ret_to_user
.end work_pending
/*
@ -430,6 +436,7 @@ strace:
beq $1, 1f
ldq $27, 0($2)
1: jsr $26, ($27), sys_gettimeofday
ret_from_straced:
ldgp $gp, 0($26)
/* check return.. */
@ -757,11 +764,15 @@ sys_vfork:
.ent sys_sigreturn
sys_sigreturn:
.prologue 0
lda $9, ret_from_straced
cmpult $26, $9, $9
mov $sp, $17
lda $18, -SWITCH_STACK_SIZE($sp)
lda $sp, -SWITCH_STACK_SIZE($sp)
jsr $26, do_sigreturn
br $1, undo_switch_stack
bne $9, 1f
jsr $26, syscall_trace
1: br $1, undo_switch_stack
br ret_from_sys_call
.end sys_sigreturn
@ -770,46 +781,18 @@ sys_sigreturn:
.ent sys_rt_sigreturn
sys_rt_sigreturn:
.prologue 0
lda $9, ret_from_straced
cmpult $26, $9, $9
mov $sp, $17
lda $18, -SWITCH_STACK_SIZE($sp)
lda $sp, -SWITCH_STACK_SIZE($sp)
jsr $26, do_rt_sigreturn
br $1, undo_switch_stack
bne $9, 1f
jsr $26, syscall_trace
1: br $1, undo_switch_stack
br ret_from_sys_call
.end sys_rt_sigreturn
.align 4
.globl sys_sigsuspend
.ent sys_sigsuspend
sys_sigsuspend:
.prologue 0
mov $sp, $17
br $1, do_switch_stack
mov $sp, $18
subq $sp, 16, $sp
stq $26, 0($sp)
jsr $26, do_sigsuspend
ldq $26, 0($sp)
lda $sp, SWITCH_STACK_SIZE+16($sp)
ret
.end sys_sigsuspend
.align 4
.globl sys_rt_sigsuspend
.ent sys_rt_sigsuspend
sys_rt_sigsuspend:
.prologue 0
mov $sp, $18
br $1, do_switch_stack
mov $sp, $19
subq $sp, 16, $sp
stq $26, 0($sp)
jsr $26, do_rt_sigsuspend
ldq $26, 0($sp)
lda $sp, SWITCH_STACK_SIZE+16($sp)
ret
.end sys_rt_sigsuspend
.align 4
.globl sys_sethae
.ent sys_sethae

View File

@ -90,11 +90,13 @@ static int
ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn,
u64 c_stat, u64 c_sts, int print)
{
char *sourcename[] = { "UNKNOWN", "UNKNOWN", "UNKNOWN",
"MEMORY", "BCACHE", "DCACHE",
"BCACHE PROBE", "BCACHE PROBE" };
char *streamname[] = { "D", "I" };
char *bitsname[] = { "SINGLE", "DOUBLE" };
static const char * const sourcename[] = {
"UNKNOWN", "UNKNOWN", "UNKNOWN",
"MEMORY", "BCACHE", "DCACHE",
"BCACHE PROBE", "BCACHE PROBE"
};
static const char * const streamname[] = { "D", "I" };
static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
int status = MCHK_DISPOSITION_REPORT;
int source = -1, stream = -1, bits = -1;

View File

@ -109,7 +109,7 @@ marvel_print_err_cyc(u64 err_cyc)
#define IO7__ERR_CYC__CYCLE__M (0x7)
printk("%s Packet In Error: %s\n"
"%s Error in %s, cycle %ld%s%s\n",
"%s Error in %s, cycle %lld%s%s\n",
err_print_prefix,
packet_desc[EXTRACT(err_cyc, IO7__ERR_CYC__PACKET)],
err_print_prefix,
@ -313,7 +313,7 @@ marvel_print_po7_ugbge_sym(u64 ugbge_sym)
}
printk("%s Up Hose Garbage Symptom:\n"
"%s Source Port: %ld - Dest PID: %ld - OpCode: %s\n",
"%s Source Port: %lld - Dest PID: %lld - OpCode: %s\n",
err_print_prefix,
err_print_prefix,
EXTRACT(ugbge_sym, IO7__PO7_UGBGE_SYM__UPH_SRC_PORT),
@ -552,7 +552,7 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
#define IO7__POX_SPLCMPLT__REM_BYTE_COUNT__M (0xfff)
printk("%s Split Completion Error:\n"
"%s Source (Bus:Dev:Func): %ld:%ld:%ld\n",
"%s Source (Bus:Dev:Func): %lld:%lld:%lld\n",
err_print_prefix,
err_print_prefix,
EXTRACT(spl_cmplt, IO7__POX_SPLCMPLT__SOURCE_BUS),
@ -589,22 +589,23 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
static void
marvel_print_pox_trans_sum(u64 trans_sum)
{
char *pcix_cmd[] = { "Interrupt Acknowledge",
"Special Cycle",
"I/O Read",
"I/O Write",
"Reserved",
"Reserved / Device ID Message",
"Memory Read",
"Memory Write",
"Reserved / Alias to Memory Read Block",
"Reserved / Alias to Memory Write Block",
"Configuration Read",
"Configuration Write",
"Memory Read Multiple / Split Completion",
"Dual Address Cycle",
"Memory Read Line / Memory Read Block",
"Memory Write and Invalidate / Memory Write Block"
static const char * const pcix_cmd[] = {
"Interrupt Acknowledge",
"Special Cycle",
"I/O Read",
"I/O Write",
"Reserved",
"Reserved / Device ID Message",
"Memory Read",
"Memory Write",
"Reserved / Alias to Memory Read Block",
"Reserved / Alias to Memory Write Block",
"Configuration Read",
"Configuration Write",
"Memory Read Multiple / Split Completion",
"Dual Address Cycle",
"Memory Read Line / Memory Read Block",
"Memory Write and Invalidate / Memory Write Block"
};
#define IO7__POX_TRANSUM__PCI_ADDR__S (0)

View File

@ -75,8 +75,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
int status = MCHK_DISPOSITION_REPORT;
#ifdef CONFIG_VERBOSE_MCHECK
char *serror_src[] = {"GPCI", "APCI", "AGP HP", "AGP LP"};
char *serror_cmd[] = {"DMA Read", "DMA RMW", "SGTE Read", "Reserved"};
static const char * const serror_src[] = {
"GPCI", "APCI", "AGP HP", "AGP LP"
};
static const char * const serror_cmd[] = {
"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
};
#endif /* CONFIG_VERBOSE_MCHECK */
#define TITAN__PCHIP_SERROR__LOST_UECC (1UL << 0)
@ -140,14 +144,15 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
int status = MCHK_DISPOSITION_REPORT;
#ifdef CONFIG_VERBOSE_MCHECK
char *perror_cmd[] = { "Interrupt Acknowledge", "Special Cycle",
"I/O Read", "I/O Write",
"Reserved", "Reserved",
"Memory Read", "Memory Write",
"Reserved", "Reserved",
"Configuration Read", "Configuration Write",
"Memory Read Multiple", "Dual Address Cycle",
"Memory Read Line","Memory Write and Invalidate"
static const char * const perror_cmd[] = {
"Interrupt Acknowledge", "Special Cycle",
"I/O Read", "I/O Write",
"Reserved", "Reserved",
"Memory Read", "Memory Write",
"Reserved", "Reserved",
"Configuration Read", "Configuration Write",
"Memory Read Multiple", "Dual Address Cycle",
"Memory Read Line", "Memory Write and Invalidate"
};
#endif /* CONFIG_VERBOSE_MCHECK */
@ -273,11 +278,11 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
int cmd, len;
unsigned long addr;
char *agperror_cmd[] = { "Read (low-priority)", "Read (high-priority)",
"Write (low-priority)",
"Write (high-priority)",
"Reserved", "Reserved",
"Flush", "Fence"
static const char * const agperror_cmd[] = {
"Read (low-priority)", "Read (high-priority)",
"Write (low-priority)", "Write (high-priority)",
"Reserved", "Reserved",
"Flush", "Fence"
};
#endif /* CONFIG_VERBOSE_MCHECK */

View File

@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/syscalls.h>
#include <linux/unistd.h>
@ -69,7 +68,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
{
struct mm_struct *mm;
lock_kernel();
mm = current->mm;
mm->end_code = bss_start + bss_len;
mm->start_brk = bss_start + bss_len;
@ -78,7 +76,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
printk("set_program_attributes(%lx %lx %lx %lx)\n",
text_start, text_len, bss_start, bss_len);
#endif
unlock_kernel();
return 0;
}
@ -517,7 +514,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
long error;
int __user *min_buf_size_ptr;
lock_kernel();
switch (code) {
case PL_SET:
if (get_user(error, &args->set.nbytes))
@ -547,7 +543,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
error = -EOPNOTSUPP;
break;
};
unlock_kernel();
return error;
}
@ -594,7 +589,7 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
{
char *sysinfo_table[] = {
const char *sysinfo_table[] = {
utsname()->sysname,
utsname()->nodename,
utsname()->release,
@ -606,7 +601,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
"dummy", /* secure RPC domain */
};
unsigned long offset;
char *res;
const char *res;
long len, err = -EINVAL;
offset = command-1;

View File

@ -66,7 +66,7 @@ static int pci_mmap_resource(struct kobject *kobj,
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
struct resource *res = (struct resource *)attr->private;
struct resource *res = attr->private;
enum pci_mmap_state mmap_type;
struct pci_bus_region bar;
int i;

View File

@ -241,20 +241,20 @@ static inline unsigned long alpha_read_pmc(int idx)
static int alpha_perf_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
long left = atomic64_read(&hwc->period_left);
long left = local64_read(&hwc->period_left);
long period = hwc->sample_period;
int ret = 0;
if (unlikely(left <= -period)) {
left = period;
atomic64_set(&hwc->period_left, left);
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (unlikely(left <= 0)) {
left += period;
atomic64_set(&hwc->period_left, left);
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
@ -269,7 +269,7 @@ static int alpha_perf_event_set_period(struct perf_event *event,
if (left > (long)alpha_pmu->pmc_max_period[idx])
left = alpha_pmu->pmc_max_period[idx];
atomic64_set(&hwc->prev_count, (unsigned long)(-left));
local64_set(&hwc->prev_count, (unsigned long)(-left));
alpha_write_pmc(idx, (unsigned long)(-left));
@ -300,10 +300,10 @@ static unsigned long alpha_perf_event_update(struct perf_event *event,
long delta;
again:
prev_raw_count = atomic64_read(&hwc->prev_count);
prev_raw_count = local64_read(&hwc->prev_count);
new_raw_count = alpha_read_pmc(idx);
if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
@ -316,8 +316,8 @@ again:
delta += alpha_pmu->pmc_max_period[idx] + 1;
}
atomic64_add(delta, &event->count);
atomic64_sub(delta, &hwc->period_left);
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
return new_raw_count;
}
@ -636,7 +636,7 @@ static int __hw_perf_event_init(struct perf_event *event)
if (!hwc->sample_period) {
hwc->sample_period = alpha_pmu->pmc_max_period[0];
hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
local64_set(&hwc->period_left, hwc->sample_period);
}
return 0;

View File

@ -156,9 +156,6 @@ extern void SMC669_Init(int);
/* es1888.c */
extern void es1888_init(void);
/* ns87312.c */
extern void ns87312_enable_ide(long ide_base);
/* ../lib/fpreg.c */
extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
extern unsigned long alpha_read_fp_reg (unsigned long reg);

View File

@ -144,8 +144,7 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
asmlinkage int
do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
@ -154,41 +153,6 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
/* Indicate EINTR on return from any possible signal handler,
which will not come back through here, but via sigreturn. */
regs->r0 = EINTR;
regs->r19 = 1;
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
return -ERESTARTNOHAND;
}
asmlinkage int
do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize,
struct pt_regs *regs, struct switch_stack *sw)
{
sigset_t set;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&set, uset, sizeof(set)))
return -EFAULT;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->saved_sigmask = current->blocked;
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
/* Indicate EINTR on return from any possible signal handler,
which will not come back through here, but via sigreturn. */
regs->r0 = EINTR;
regs->r19 = 1;
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
@ -239,6 +203,8 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
unsigned long usp;
long i, err = __get_user(regs->pc, &sc->sc_pc);
current_thread_info()->restart_block.fn = do_no_restart_syscall;
sw->r26 = (unsigned long) ret_from_sys_call;
err |= __get_user(regs->r0, sc->sc_regs+0);
@ -591,7 +557,6 @@ syscall_restart(unsigned long r0, unsigned long r19,
regs->pc -= 4;
break;
case ERESTART_RESTARTBLOCK:
current_thread_info()->restart_block.fn = do_no_restart_syscall;
regs->r0 = EINTR;
break;
}

View File

@ -87,7 +87,7 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
srm_env_t *entry;
char *page;
entry = (srm_env_t *)m->private;
entry = m->private;
page = (char *)__get_free_page(GFP_USER);
if (!page)
return -ENOMEM;

View File

@ -33,7 +33,7 @@
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
#include "pc873xx.h"
/* Note mask bit is true for DISABLED irqs. */
static unsigned long cached_irq_mask = ~0UL;
@ -235,18 +235,31 @@ cabriolet_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
return COMMON_TABLE_LOOKUP;
}
static inline void __init
cabriolet_enable_ide(void)
{
if (pc873xx_probe() == -1) {
printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
} else {
printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
pc873xx_get_model(), pc873xx_get_base());
pc873xx_enable_ide();
}
}
static inline void __init
cabriolet_init_pci(void)
{
common_init_pci();
ns87312_enable_ide(0x398);
cabriolet_enable_ide();
}
static inline void __init
cia_cab_init_pci(void)
{
cia_init_pci();
ns87312_enable_ide(0x398);
cabriolet_enable_ide();
}
/*

View File

@ -29,7 +29,7 @@
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
#include "pc873xx.h"
/* Note mask bit is true for DISABLED irqs. */
static unsigned long cached_irq_mask[2] = { -1, -1 };
@ -264,7 +264,14 @@ takara_init_pci(void)
alpha_mv.pci_map_irq = takara_map_irq_srm;
cia_init_pci();
ns87312_enable_ide(0x26e);
if (pc873xx_probe() == -1) {
printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
} else {
printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
pc873xx_get_model(), pc873xx_get_base());
pc873xx_enable_ide();
}
}

View File

@ -512,6 +512,9 @@ sys_call_table:
.quad sys_pwritev
.quad sys_rt_tgsigqueueinfo
.quad sys_perf_event_open
.quad sys_fanotify_init
.quad sys_fanotify_mark /* 495 */
.quad sys_prlimit64
.size sys_call_table, . - sys_call_table
.type sys_call_table, @object

View File

@ -191,16 +191,16 @@ irqreturn_t timer_interrupt(int irq, void *dev)
write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
while (nticks--)
update_process_times(user_mode(get_irq_regs()));
#endif
if (test_perf_event_pending()) {
clear_perf_event_pending();
perf_event_do_pending();
}
#ifndef CONFIG_SMP
while (nticks--)
update_process_times(user_mode(get_irq_regs()));
#endif
return IRQ_HANDLED;
}

View File

@ -13,7 +13,6 @@
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kallsyms.h>
@ -623,7 +622,6 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
return;
}
lock_kernel();
printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
pc, va, opcode, reg);
do_exit(SIGSEGV);
@ -646,7 +644,6 @@ got_exception:
* Yikes! No one to forward the exception to.
* Since the registers are in a weird format, dump them ourselves.
*/
lock_kernel();
printk("%s(%d): unhandled unaligned exception\n",
current->comm, task_pid_nr(current));

View File

@ -1576,96 +1576,6 @@ config AUTO_ZRELADDR
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
config ZRELADDR
hex "Physical address of the decompressed kernel image"
depends on !AUTO_ZRELADDR
default 0x00008000 if ARCH_BCMRING ||\
ARCH_CNS3XXX ||\
ARCH_DOVE ||\
ARCH_EBSA110 ||\
ARCH_FOOTBRIDGE ||\
ARCH_INTEGRATOR ||\
ARCH_IOP13XX ||\
ARCH_IOP33X ||\
ARCH_IXP2000 ||\
ARCH_IXP23XX ||\
ARCH_IXP4XX ||\
ARCH_KIRKWOOD ||\
ARCH_KS8695 ||\
ARCH_LOKI ||\
ARCH_MMP ||\
ARCH_MV78XX0 ||\
ARCH_NOMADIK ||\
ARCH_NUC93X ||\
ARCH_NS9XXX ||\
ARCH_ORION5X ||\
ARCH_SPEAR3XX ||\
ARCH_SPEAR6XX ||\
ARCH_U8500 ||\
ARCH_VERSATILE ||\
ARCH_W90X900
default 0x08008000 if ARCH_MX1 ||\
ARCH_SHARK
default 0x10008000 if ARCH_MSM ||\
ARCH_OMAP1 ||\
ARCH_RPC
default 0x20008000 if ARCH_S5P6440 ||\
ARCH_S5P6442 ||\
ARCH_S5PC100 ||\
ARCH_S5PV210
default 0x30008000 if ARCH_S3C2410 ||\
ARCH_S3C2400 ||\
ARCH_S3C2412 ||\
ARCH_S3C2416 ||\
ARCH_S3C2440 ||\
ARCH_S3C2443
default 0x40008000 if ARCH_STMP378X ||\
ARCH_STMP37XX ||\
ARCH_SH7372 ||\
ARCH_SH7377 ||\
ARCH_S5PV310
default 0x50008000 if ARCH_S3C64XX ||\
ARCH_SH7367
default 0x60008000 if ARCH_VEXPRESS
default 0x80008000 if ARCH_MX25 ||\
ARCH_MX3 ||\
ARCH_NETX ||\
ARCH_OMAP2PLUS ||\
ARCH_PNX4008
default 0x90008000 if ARCH_MX5 ||\
ARCH_MX91231
default 0xa0008000 if ARCH_IOP32X ||\
ARCH_PXA ||\
MACH_MX27
default 0xc0008000 if ARCH_LH7A40X ||\
MACH_MX21
default 0xf0008000 if ARCH_AAEC2000 ||\
ARCH_L7200
default 0xc0028000 if ARCH_CLPS711X
default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
default 0xc0208000 if ARCH_SA1100 && SA1111
default 0xc0008000 if ARCH_SA1100 && !SA1111
default 0x30108000 if ARCH_S3C2410 && PM_H1940
default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
help
ZRELADDR is the physical address where the decompressed kernel
image will be placed. ZRELADDR has to be specified when the
assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
selected.
endmenu
menu "CPU Power Management"

View File

@ -14,16 +14,18 @@
MKIMAGE := $(srctree)/scripts/mkuboot.sh
ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
include $(srctree)/$(MACHINE)/Makefile.boot
endif
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
ZRELADDR := $(zreladdr-y)
PARAMS_PHYS := $(params_phys-y)
INITRD_PHYS := $(initrd_phys-y)
export INITRD_PHYS PARAMS_PHYS
export ZRELADDR INITRD_PHYS PARAMS_PHYS
targets := Image zImage xipImage bootpImage uImage
@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE $@
ifeq ($(CONFIG_ZBOOT_ROM),y)
$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
else
$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)

View File

@ -79,6 +79,10 @@ endif
EXTRA_CFLAGS := -fpic -fno-builtin
EXTRA_AFLAGS := -Wa,-march=all
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif

View File

@ -177,7 +177,7 @@ not_angel:
and r4, pc, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =CONFIG_ZRELADDR
ldr r4, =zreladdr
#endif
subs r0, r0, r1 @ calculate the delta offset

View File

@ -263,6 +263,14 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
return 0;
}
int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
__func__, dma_addr, size);
return (dev->bus == &pci_bus_type) &&
((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
}
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
it8152_io.start = IT8152_IO_BASE + 0x12000;

View File

@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *);
* DMA access and 1 if the buffer needs to be bounced.
*
*/
#ifdef CONFIG_SA1111
extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
#else
static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
size_t size)
{
return 0;
}
#endif
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.

View File

@ -17,7 +17,7 @@
* counter interrupts are regular interrupts and not an NMI. This
* means that when we receive the interrupt we can call
* perf_event_do_pending() that handles all of the work with
* interrupts enabled.
* interrupts disabled.
*/
static inline void
set_perf_event_pending(void)

View File

@ -393,6 +393,9 @@
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
/*
* The following SWIs are ARM private.

View File

@ -376,6 +376,9 @@
CALL(sys_perf_event_open)
/* 365 */ CALL(sys_recvmmsg)
CALL(sys_accept4)
CALL(sys_fanotify_init)
CALL(sys_fanotify_mark)
CALL(sys_prlimit64)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

View File

@ -418,11 +418,13 @@ ENDPROC(sys_clone_wrapper)
sys_sigreturn_wrapper:
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b sys_sigreturn
ENDPROC(sys_sigreturn_wrapper)
sys_rt_sigreturn_wrapper:
add r0, sp, #S_OFF
mov why, #0 @ prevent syscall restart handling
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)

View File

@ -319,8 +319,8 @@ validate_event(struct cpu_hw_events *cpuc,
{
struct hw_perf_event fake_event = event->hw;
if (event->pmu && event->pmu != &pmu)
return 0;
if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
}
@ -1041,8 +1041,8 @@ armv6pmu_handle_irq(int irq_num,
/*
* Handle the pending perf events.
*
* Note: this call *must* be run with interrupts enabled. For
* platforms that can have the PMU interrupts raised as a PMI, this
* Note: this call *must* be run with interrupts disabled. For
* platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
perf_event_do_pending();
@ -2017,8 +2017,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
/*
* Handle the pending perf events.
*
* Note: this call *must* be run with interrupts enabled. For
* platforms that can have the PMU interrupts raised as a PMI, this
* Note: this call *must* be run with interrupts disabled. For
* platforms that can have the PMU interrupts raised as an NMI, this
* will not work.
*/
perf_event_do_pending();

View File

@ -121,8 +121,8 @@ static struct clk ssc1_clk = {
.pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk tcb_clk = {
.name = "tcb_clk",
static struct clk tcb0_clk = {
.name = "tcb0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_TCB,
.type = CLK_TYPE_PERIPHERAL,
};
@ -192,6 +192,14 @@ static struct clk ohci_clk = {
.parent = &uhphs_clk,
};
/* One additional fake clock for second TC block */
static struct clk tcb1_clk = {
.name = "tcb1_clk",
.pmc_mask = 0,
.type = CLK_TYPE_PERIPHERAL,
.parent = &tcb0_clk,
};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
&spi1_clk,
&ssc0_clk,
&ssc1_clk,
&tcb_clk,
&tcb0_clk,
&pwm_clk,
&tsc_clk,
&dma_clk,
@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
&mmc1_clk,
// irq0
&ohci_clk,
&tcb1_clk,
};
/*

View File

@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = {
.end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
[1] = {
.start = AT91SAM9G45_ID_DMA,
.end = AT91SAM9G45_ID_DMA,
.flags = IORESOURCE_IRQ,
@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
static void __init at91_add_device_tc(void)
{
/* this chip has one clock and irq for all six TC channels */
at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb0_device);
at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
platform_device_register(&at91sam9g45_tcb1_device);
}
#else

View File

@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
.start = AT91_PIN_PC11,
.end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct dm9000_plat_data dm9000_platdata = {
.flags = DM9000_PLATF_16BITONLY,
.flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
};
static struct platform_device dm9000_device = {
@ -167,17 +168,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
};
/*
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
// .det_pin = ... not connected
// .wp_pin = ... not connected
// .vcc_pin = ... not connected
};
/*
* NAND flash
*/
@ -246,6 +236,10 @@ static void __init ek_add_device_nand(void)
at91_add_device_nand(&ek_nand_data);
}
/*
* SPI related devices
*/
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
/*
* ADS7846 Touchscreen
@ -356,6 +350,19 @@ static struct spi_board_info ek_spi_devices[] = {
#endif
};
#else /* CONFIG_SPI_ATMEL_* */
/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
/*
* MCI (SD/MMC)
* det_pin, wp_pin and vcc_pin are not connected
*/
static struct at91_mmc_data __initdata ek_mmc_data = {
.wire4 = 1,
};
#endif /* CONFIG_SPI_ATMEL_* */
/*
* LCD Controller

View File

@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
int __init clk_register(struct clk *clk)
{
if (clk_is_peripheral(clk)) {
clk->parent = &mck;
if (!clk->parent)
clk->parent = &mck;
clk->mode = pmc_periph_mode;
list_add_tail(&clk->node, &clocks);
}

View File

@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void)
clkdev_add_table(clocks, ARRAY_SIZE(clocks));
return 0;
}
arch_initcall(ep93xx_clock_init);
postcore_initcall(ep93xx_clock_init);

View File

@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd_baseboard_init(void)
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))

View File

@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
if (!otg_mode_host)
mxc_register_device(&otg_udc_device, &otg_device_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
eukrea_mbimxsd_baseboard_init();
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
eukrea_mbimxsd25_baseboard_init();
#endif
}

View File

@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
aad = &clk_consumer[(pdr0 >> 16) & 0xf];
if (aad->sel)
fref = fref * 2 / 3;
fref = fref * 3 / 4;
return fref / aad->arm;
}
@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
unsigned long fref = get_rate_arm();
aad = &clk_consumer[(pdr0 >> 16) & 0xf];
@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
return get_rate_ahb(NULL) >> 1;
}
static unsigned long get_3_3_div(unsigned long in)
{
return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
}
static unsigned long get_rate_uart(struct clk *clk)
{
unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
unsigned long div = get_3_3_div(pdr4 >> 10);
unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
if (pdr3 & (1 << 14))
return get_rate_arm() / div;
@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
break;
}
return rate / get_3_3_div(div);
return rate / (div + 1);
}
static unsigned long get_rate_mshc(struct clk *clk)
@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
else
rate = get_rate_ppll();
return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
return rate / (((pdr2 >> 16) & 0x3f) + 1);
}
static unsigned long get_rate_otg(struct clk *clk)
@ -283,25 +278,51 @@ static unsigned long get_rate_otg(struct clk *clk)
else
rate = get_rate_ppll();
return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
return rate / (((pdr4 >> 22) & 0x3f) + 1);
}
static unsigned long get_rate_ipg_per(struct clk *clk)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
unsigned long div1, div2;
unsigned long div;
if (pdr0 & (1 << 26)) {
div1 = (pdr4 >> 19) & 0x7;
div2 = (pdr4 >> 16) & 0x7;
return get_rate_arm() / ((div1 + 1) * (div2 + 1));
div = (pdr4 >> 16) & 0x3f;
return get_rate_arm() / (div + 1);
} else {
div1 = (pdr0 >> 12) & 0x7;
return get_rate_ahb(NULL) / div1;
div = (pdr0 >> 12) & 0x7;
return get_rate_ahb(NULL) / (div + 1);
}
}
static unsigned long get_rate_hsp(struct clk *clk)
{
unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
unsigned long fref = get_rate_mpll();
if (fref > 400 * 1000 * 1000) {
switch (hsp_podf) {
case 0:
return fref >> 2;
case 1:
return fref >> 3;
case 2:
return fref / 3;
}
} else {
switch (hsp_podf) {
case 0:
case 2:
return fref / 3;
case 1:
return fref / 6;
}
}
return 0;
}
static int clk_cgr_enable(struct clk *clk)
{
u32 reg;
@ -359,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk, 0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
DEFINE_CLOCK(i2c2_clk, 1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
DEFINE_CLOCK(i2c3_clk, 2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_ahb, NULL);
DEFINE_CLOCK(ipu_clk, 0, CCM_CGR1, 18, get_rate_hsp, NULL);
DEFINE_CLOCK(kpp_clk, 0, CCM_CGR1, 20, get_rate_ipg, NULL);
DEFINE_CLOCK(mlb_clk, 0, CCM_CGR1, 22, get_rate_ahb, NULL);
DEFINE_CLOCK(mshc_clk, 0, CCM_CGR1, 24, get_rate_mshc, NULL);
@ -485,10 +506,10 @@ static struct clk_lookup lookups[] = {
int __init mx35_clocks_init()
{
unsigned int ll = 0;
unsigned int cgr2 = 3 << 26, cgr3 = 0;
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
ll = (3 << 16);
cgr2 |= 3 << 16;
#endif
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@ -499,8 +520,20 @@ int __init mx35_clocks_init()
__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
CCM_BASE + CCM_CGR1);
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
/*
* Check if we came up in internal boot mode. If yes, we need some
* extra clocks turned on, otherwise the MX35 boot ROM code will
* hang after a watchdog reset.
*/
if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
/* Additionally turn on UART1, SCC, and IIM clocks */
cgr2 |= 3 << 16 | 3 << 4;
cgr3 |= 3 << 2;
}
__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
mxc_timer_init(&gpt_clk,
MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);

View File

@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd_baseboard_init(void)
void __init eukrea_mbimxsd35_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))

View File

@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
eukrea_mbimxsd_baseboard_init();
#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
eukrea_mbimxsd35_baseboard_init();
#endif
}

View File

@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk)
{
u32 reg;
reg = __raw_readl(clk->enable_reg);
reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}

View File

@ -398,7 +398,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
return 0;
}
static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
static int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
unsigned int freq;

View File

@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
return 0;
}
static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
{
int ret = -EINVAL;

View File

@ -71,10 +71,10 @@
#define GPIO46_CI_DD_7 MFP_CFG_DRV(GPIO46, AF0, DS04X)
#define GPIO47_CI_DD_8 MFP_CFG_DRV(GPIO47, AF1, DS04X)
#define GPIO48_CI_DD_9 MFP_CFG_DRV(GPIO48, AF1, DS04X)
#define GPIO52_CI_HSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
#define GPIO51_CI_VSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
#define GPIO49_CI_MCLK MFP_CFG_DRV(GPIO49, AF0, DS04X)
#define GPIO50_CI_PCLK MFP_CFG_DRV(GPIO50, AF0, DS04X)
#define GPIO51_CI_HSYNC MFP_CFG_DRV(GPIO51, AF0, DS04X)
#define GPIO52_CI_VSYNC MFP_CFG_DRV(GPIO52, AF0, DS04X)
/* KEYPAD */
#define GPIO3_KP_DKIN_6 MFP_CFG_LPM(GPIO3, AF2, FLOAT)

View File

@ -18,10 +18,11 @@
#include <mach/map.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
#include <plat/irqs.h>
#include <plat/devs.h>
static char *spi_src_clks[] = {
[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",

View File

@ -30,73 +30,73 @@
#include <plat/devs.h>
#include <plat/regs-serial.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource real6410_dm9k_resource[] = {
[0] = {
.start = S3C64XX_PA_XM0CSN1,
.end = S3C64XX_PA_XM0CSN1 + 1,
.flags = IORESOURCE_MEM
},
[1] = {
.start = S3C64XX_PA_XM0CSN1 + 4,
.end = S3C64XX_PA_XM0CSN1 + 5,
.flags = IORESOURCE_MEM
},
[2] = {
.start = S3C_EINT(7),
.end = S3C_EINT(7),
.flags = IORESOURCE_IRQ,
}
[0] = {
.start = S3C64XX_PA_XM0CSN1,
.end = S3C64XX_PA_XM0CSN1 + 1,
.flags = IORESOURCE_MEM
},
[1] = {
.start = S3C64XX_PA_XM0CSN1 + 4,
.end = S3C64XX_PA_XM0CSN1 + 5,
.flags = IORESOURCE_MEM
},
[2] = {
.start = S3C_EINT(7),
.end = S3C_EINT(7),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
}
};
static struct dm9000_plat_data real6410_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
static struct platform_device real6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(real6410_dm9k_resource),
.resource = real6410_dm9k_resource,
.dev = {
.platform_data = &real6410_dm9k_pdata,
},
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(real6410_dm9k_resource),
.resource = real6410_dm9k_resource,
.dev = {
.platform_data = &real6410_dm9k_pdata,
},
};
static struct platform_device *real6410_devices[] __initdata = {
@ -129,12 +129,12 @@ static void __init real6410_machine_init(void)
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
}

View File

@ -280,6 +280,24 @@ static struct clk init_clocks_disable[] = {
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1<<29),
}, {
.name = "fimc",
.id = 0,
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 24),
}, {
.name = "fimc",
.id = 1,
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 25),
}, {
.name = "fimc",
.id = 2,
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1 << 26),
}, {
.name = "otg",
.id = -1,
@ -357,7 +375,7 @@ static struct clk init_clocks_disable[] = {
.id = 1,
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<8),
.ctrlbit = (1 << 10),
}, {
.name = "i2c",
.id = 2,

View File

@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
.length = SZ_1M,
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)VA_VIC2,

View File

@ -3,7 +3,7 @@
#
# Common objects
obj-y := timer.o console.o clock.o
obj-y := timer.o console.o clock.o pm_runtime.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o

View File

@ -25,6 +25,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mfd/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -39,6 +40,7 @@
#include <linux/sh_clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
@ -307,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_ocr_mask = MMC_VDD_165_195,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi1_resources[] = {
@ -558,7 +561,7 @@ static struct resource fsi_resources[] = {
static struct platform_device fsi_device = {
.name = "sh_fsi2",
.id = 0,
.id = -1,
.num_resources = ARRAY_SIZE(fsi_resources),
.resource = fsi_resources,
.dev = {
@ -650,7 +653,44 @@ static struct platform_device hdmi_device = {
},
};
static struct gpio_led ap4evb_leds[] = {
{
.name = "led4",
.gpio = GPIO_PORT185,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led2",
.gpio = GPIO_PORT186,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led3",
.gpio = GPIO_PORT187,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
{
.name = "led1",
.gpio = GPIO_PORT188,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}
};
static struct gpio_led_platform_data ap4evb_leds_pdata = {
.num_leds = ARRAY_SIZE(ap4evb_leds),
.leds = ap4evb_leds,
};
static struct platform_device leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &ap4evb_leds_pdata,
},
};
static struct platform_device *ap4evb_devices[] __initdata = {
&leds_device,
&nor_flash_device,
&smc911x_device,
&sdhi0_device,
@ -840,20 +880,6 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_CS5A, NULL);
gpio_request(GPIO_FN_IRQ6_39, NULL);
/* enable LED 1 - 4 */
gpio_request(GPIO_PORT185, NULL);
gpio_request(GPIO_PORT186, NULL);
gpio_request(GPIO_PORT187, NULL);
gpio_request(GPIO_PORT188, NULL);
gpio_direction_output(GPIO_PORT185, 1);
gpio_direction_output(GPIO_PORT186, 1);
gpio_direction_output(GPIO_PORT187, 1);
gpio_direction_output(GPIO_PORT188, 1);
gpio_export(GPIO_PORT185, 0);
gpio_export(GPIO_PORT186, 0);
gpio_export(GPIO_PORT187, 0);
gpio_export(GPIO_PORT188, 0);
/* enable Debug switch (S6) */
gpio_request(GPIO_PORT32, NULL);
gpio_request(GPIO_PORT33, NULL);

View File

@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = {
struct clk pllc2_clk = {
.ops = &pllc2_clk_ops,
.flags = CLK_ENABLE_ON_INIT,
.parent = &extal1_div2_clk,
.freq_table = pllc2_freq_table,
.parent_table = pllc2_parent,
@ -395,7 +394,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
enum { MSTP001,
MSTP131, MSTP130,
MSTP129, MSTP128,
MSTP129, MSTP128, MSTP127, MSTP126,
MSTP118, MSTP117, MSTP116,
MSTP106, MSTP101, MSTP100,
MSTP223,
@ -413,6 +412,8 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@ -428,7 +429,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
@ -498,6 +499,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */

View File

@ -1,8 +1,10 @@
/*
* SH-Mobile Timer
* SH-Mobile Clock Framework
*
* Copyright (C) 2010 Magnus Damm
*
* Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.

View File

@ -0,0 +1,169 @@
/*
* arch/arm/mach-shmobile/pm_runtime.c
*
* Runtime PM support code for SuperH Mobile ARM
*
* Copyright (C) 2009-2010 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/sh_clk.h>
#include <linux/bitmap.h>
#ifdef CONFIG_PM_RUNTIME
#define BIT_ONCE 0
#define BIT_ACTIVE 1
#define BIT_CLK_ENABLED 2
struct pm_runtime_data {
unsigned long flags;
struct clk *clk;
};
static void __devres_release(struct device *dev, void *res)
{
struct pm_runtime_data *prd = res;
dev_dbg(dev, "__devres_release()\n");
if (test_bit(BIT_CLK_ENABLED, &prd->flags))
clk_disable(prd->clk);
if (test_bit(BIT_ACTIVE, &prd->flags))
clk_put(prd->clk);
}
static struct pm_runtime_data *__to_prd(struct device *dev)
{
return devres_find(dev, __devres_release, NULL, NULL);
}
static void platform_pm_runtime_init(struct device *dev,
struct pm_runtime_data *prd)
{
if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
prd->clk = clk_get(dev, NULL);
if (!IS_ERR(prd->clk)) {
set_bit(BIT_ACTIVE, &prd->flags);
dev_info(dev, "clocks managed by runtime pm\n");
}
}
}
static void platform_pm_runtime_bug(struct device *dev,
struct pm_runtime_data *prd)
{
if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
dev_err(dev, "runtime pm suspend before resume\n");
}
int platform_pm_runtime_suspend(struct device *dev)
{
struct pm_runtime_data *prd = __to_prd(dev);
dev_dbg(dev, "platform_pm_runtime_suspend()\n");
platform_pm_runtime_bug(dev, prd);
if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
clk_disable(prd->clk);
clear_bit(BIT_CLK_ENABLED, &prd->flags);
}
return 0;
}
int platform_pm_runtime_resume(struct device *dev)
{
struct pm_runtime_data *prd = __to_prd(dev);
dev_dbg(dev, "platform_pm_runtime_resume()\n");
platform_pm_runtime_init(dev, prd);
if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
clk_enable(prd->clk);
set_bit(BIT_CLK_ENABLED, &prd->flags);
}
return 0;
}
int platform_pm_runtime_idle(struct device *dev)
{
/* suspend synchronously to disable clocks immediately */
return pm_runtime_suspend(dev);
}
static int platform_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct pm_runtime_data *prd;
dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
if (action == BUS_NOTIFY_BIND_DRIVER) {
prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
if (prd)
devres_add(dev, prd);
else
dev_err(dev, "unable to alloc memory for runtime pm\n");
}
return 0;
}
#else /* CONFIG_PM_RUNTIME */
static int platform_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
struct clk *clk;
dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
switch (action) {
case BUS_NOTIFY_BIND_DRIVER:
clk = clk_get(dev, NULL);
if (!IS_ERR(clk)) {
clk_enable(clk);
clk_put(clk);
dev_info(dev, "runtime pm disabled, clock forced on\n");
}
break;
case BUS_NOTIFY_UNBOUND_DRIVER:
clk = clk_get(dev, NULL);
if (!IS_ERR(clk)) {
clk_disable(clk);
clk_put(clk);
dev_info(dev, "runtime pm disabled, clock forced off\n");
}
break;
}
return 0;
}
#endif /* CONFIG_PM_RUNTIME */
static struct notifier_block platform_bus_notifier = {
.notifier_call = platform_bus_notify
};
static int __init sh_pm_runtime_init(void)
{
bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
core_initcall(sh_pm_runtime_init);

View File

@ -398,7 +398,7 @@ config CPU_V6
# ARMv6k
config CPU_32v6K
bool "Support ARM V6K processor extensions" if !SMP
depends on CPU_V6
depends on CPU_V6 || CPU_V7
default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
help
Say Y here if your ARMv6 processor supports the 'K' extension.

View File

@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
}
} while (size -= PAGE_SIZE);
dsb();
return (void *)c->vm_start;
}
return NULL;

View File

@ -43,6 +43,7 @@ config ARCH_MXC91231
config ARCH_MX5
bool "MX5-based"
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
help
This enables support for systems based on the Freescale i.MX51 family

View File

@ -37,9 +37,9 @@
* mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
*/
extern void eukrea_mbimx25_baseboard_init(void);
extern void eukrea_mbimxsd25_baseboard_init(void);
extern void eukrea_mbimx27_baseboard_init(void);
extern void eukrea_mbimx35_baseboard_init(void);
extern void eukrea_mbimxsd35_baseboard_init(void);
extern void eukrea_mbimx51_baseboard_init(void);
#endif

View File

@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle)
return -EAGAIN;
for (i = 0; i < 4; i++) {
v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
__raw_writel(v, TZIC_WAKEUP0(i));
v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
wakeup_intr[i];
__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
}
return 0;

View File

@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm)
static int __devinit pwm_probe(struct platform_device *pdev)
{
struct platform_device_id *id = platform_get_device_id(pdev);
const struct platform_device_id *id = platform_get_device_id(pdev);
struct pwm_device *pwm, *secondary = NULL;
struct resource *r;
int ret = 0;

View File

@ -10,6 +10,7 @@
*/
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
@ -18,7 +19,7 @@
static struct resource s5p_fimc0_resource[] = {
[0] = {
.start = S5P_PA_FIMC0,
.end = S5P_PA_FIMC0 + SZ_1M - 1,
.end = S5P_PA_FIMC0 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -28,9 +29,15 @@ static struct resource s5p_fimc0_resource[] = {
},
};
static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
struct platform_device s5p_device_fimc0 = {
.name = "s5p-fimc",
.id = 0,
.num_resources = ARRAY_SIZE(s5p_fimc0_resource),
.resource = s5p_fimc0_resource,
.dev = {
.dma_mask = &s5p_fimc0_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

View File

@ -10,6 +10,7 @@
*/
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
@ -18,7 +19,7 @@
static struct resource s5p_fimc1_resource[] = {
[0] = {
.start = S5P_PA_FIMC1,
.end = S5P_PA_FIMC1 + SZ_1M - 1,
.end = S5P_PA_FIMC1 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -28,9 +29,15 @@ static struct resource s5p_fimc1_resource[] = {
},
};
static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
struct platform_device s5p_device_fimc1 = {
.name = "s5p-fimc",
.id = 1,
.num_resources = ARRAY_SIZE(s5p_fimc1_resource),
.resource = s5p_fimc1_resource,
.dev = {
.dma_mask = &s5p_fimc1_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

View File

@ -10,6 +10,7 @@
*/
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
@ -18,7 +19,7 @@
static struct resource s5p_fimc2_resource[] = {
[0] = {
.start = S5P_PA_FIMC2,
.end = S5P_PA_FIMC2 + SZ_1M - 1,
.end = S5P_PA_FIMC2 + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -28,9 +29,15 @@ static struct resource s5p_fimc2_resource[] = {
},
};
static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
struct platform_device s5p_device_fimc2 = {
.name = "s5p-fimc",
.id = 2,
.num_resources = ARRAY_SIZE(s5p_fimc2_resource),
.resource = s5p_fimc2_resource,
.dev = {
.dma_mask = &s5p_fimc2_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};

View File

@ -273,13 +273,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
if (!chip)
return -EINVAL;
off = chip->chip.base - pin;
off = pin - chip->chip.base;
shift = off * 2;
reg = chip->base + 0x0C;
drvstr = __raw_readl(reg);
drvstr = 0xffff & (0x3 << shift);
drvstr = drvstr >> shift;
drvstr &= 0x3;
return (__force s5p_gpio_drvstr_t)drvstr;
}
@ -296,11 +296,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
if (!chip)
return -EINVAL;
off = chip->chip.base - pin;
off = pin - chip->chip.base;
shift = off * 2;
reg = chip->base + 0x0C;
tmp = __raw_readl(reg);
tmp &= ~(0x3 << shift);
tmp |= drvstr << shift;
__raw_writel(tmp, reg);

View File

@ -143,12 +143,12 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
/* Define values for the drvstr available for each gpio pin.
*
* These values control the value of the output signal driver strength,
* configurable on most pins on the S5C series.
* configurable on most pins on the S5P series.
*/
#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x0)
#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x2)
#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x1)
#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x3)
/**
* s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin

View File

@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Mon Jul 12 21:10:14 2010
# Last update: Thu Sep 9 22:43:01 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@ -2622,7 +2622,7 @@ kraken MACH_KRAKEN KRAKEN 2634
gw2388 MACH_GW2388 GW2388 2635
jadecpu MACH_JADECPU JADECPU 2636
carlisle MACH_CARLISLE CARLISLE 2637
lux_sf9 MACH_LUX_SFT9 LUX_SFT9 2638
lux_sf9 MACH_LUX_SF9 LUX_SF9 2638
nemid_tb MACH_NEMID_TB NEMID_TB 2639
terrier MACH_TERRIER TERRIER 2640
turbot MACH_TURBOT TURBOT 2641
@ -2950,3 +2950,97 @@ davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963
netviz MACH_NETVIZ NETVIZ 2964
flexibity MACH_FLEXIBITY FLEXIBITY 2965
wlan_computer MACH_WLAN_COMPUTER WLAN_COMPUTER 2966
lpc24xx MACH_LPC24XX LPC24XX 2967
spica MACH_SPICA SPICA 2968
gpsdisplay MACH_GPSDISPLAY GPSDISPLAY 2969
bipnet MACH_BIPNET BIPNET 2970
overo_ctu_inertial MACH_OVERO_CTU_INERTIAL OVERO_CTU_INERTIAL 2971
davinci_dm355_mmm MACH_DAVINCI_DM355_MMM DAVINCI_DM355_MMM 2972
pc9260_v2 MACH_PC9260_V2 PC9260_V2 2973
ptx7545 MACH_PTX7545 PTX7545 2974
tm_efdc MACH_TM_EFDC TM_EFDC 2975
omap3_waldo1 MACH_OMAP3_WALDO1 OMAP3_WALDO1 2977
flyer MACH_FLYER FLYER 2978
tornado3240 MACH_TORNADO3240 TORNADO3240 2979
soli_01 MACH_SOLI_01 SOLI_01 2980
omapl138_europalc MACH_OMAPL138_EUROPALC OMAPL138_EUROPALC 2981
helios_v1 MACH_HELIOS_V1 HELIOS_V1 2982
netspace_lite_v2 MACH_NETSPACE_LITE_V2 NETSPACE_LITE_V2 2983
ssc MACH_SSC SSC 2984
premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985
wasabi MACH_WASABI WASABI 2986
vivow MACH_VIVOW VIVOW 2987
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
universal MACH_UNIVERSAL UNIVERSAL 2989
real6410 MACH_REAL6410 REAL6410 2990
spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
omap3_bc10 MACH_OMAP3_BC10 OMAP3_BC10 2993
thebe MACH_THEBE THEBE 2994
rv082 MACH_RV082 RV082 2995
armlguest MACH_ARMLGUEST ARMLGUEST 2996
tjinc1000 MACH_TJINC1000 TJINC1000 2997
dockstar MACH_DOCKSTAR DOCKSTAR 2998
ax8008 MACH_AX8008 AX8008 2999
gnet_sgce MACH_GNET_SGCE GNET_SGCE 3000
pxwnas_500_1000 MACH_PXWNAS_500_1000 PXWNAS_500_1000 3001
ea20 MACH_EA20 EA20 3002
awm2 MACH_AWM2 AWM2 3003
ti8148evm MACH_TI8148EVM TI8148EVM 3004
tegra_seaboard MACH_TEGRA_SEABOARD TEGRA_SEABOARD 3005
linkstation_chlv2 MACH_LINKSTATION_CHLV2 LINKSTATION_CHLV2 3006
tera_pro2_rack MACH_TERA_PRO2_RACK TERA_PRO2_RACK 3007
rubys MACH_RUBYS RUBYS 3008
aquarius MACH_AQUARIUS AQUARIUS 3009
mx53_ard MACH_MX53_ARD MX53_ARD 3010
mx53_smd MACH_MX53_SMD MX53_SMD 3011
lswxl MACH_LSWXL LSWXL 3012
dove_avng_v3 MACH_DOVE_AVNG_V3 DOVE_AVNG_V3 3013
sdi_ess_9263 MACH_SDI_ESS_9263 SDI_ESS_9263 3014
jocpu550 MACH_JOCPU550 JOCPU550 3015
msm8x60_rumi3 MACH_MSM8X60_RUMI3 MSM8X60_RUMI3 3016
msm8x60_ffa MACH_MSM8X60_FFA MSM8X60_FFA 3017
yanomami MACH_YANOMAMI YANOMAMI 3018
gta04 MACH_GTA04 GTA04 3019
cm_a510 MACH_CM_A510 CM_A510 3020
omap3_rfs200 MACH_OMAP3_RFS200 OMAP3_RFS200 3021
kx33xx MACH_KX33XX KX33XX 3022
ptx7510 MACH_PTX7510 PTX7510 3023
top9000 MACH_TOP9000 TOP9000 3024
teenote MACH_TEENOTE TEENOTE 3025
ts3 MACH_TS3 TS3 3026
a0 MACH_A0 A0 3027
fsm9xxx_surf MACH_FSM9XXX_SURF FSM9XXX_SURF 3028
fsm9xxx_ffa MACH_FSM9XXX_FFA FSM9XXX_FFA 3029
frrhwcdma60w MACH_FRRHWCDMA60W FRRHWCDMA60W 3030
remus MACH_REMUS REMUS 3031
at91cap7xdk MACH_AT91CAP7XDK AT91CAP7XDK 3032
at91cap7stk MACH_AT91CAP7STK AT91CAP7STK 3033
kt_sbc_sam9_1 MACH_KT_SBC_SAM9_1 KT_SBC_SAM9_1 3034
oratisrouter MACH_ORATISROUTER ORATISROUTER 3035
armada_xp_db MACH_ARMADA_XP_DB ARMADA_XP_DB 3036
spdm MACH_SPDM SPDM 3037
gtib MACH_GTIB GTIB 3038
dgm3240 MACH_DGM3240 DGM3240 3039
atlas_i_lpe MACH_ATLAS_I_LPE ATLAS_I_LPE 3040
htcmega MACH_HTCMEGA HTCMEGA 3041
tricorder MACH_TRICORDER TRICORDER 3042
tx28 MACH_TX28 TX28 3043
bstbrd MACH_BSTBRD BSTBRD 3044
pwb3090 MACH_PWB3090 PWB3090 3045
idea6410 MACH_IDEA6410 IDEA6410 3046
qbc9263 MACH_QBC9263 QBC9263 3047
borabora MACH_BORABORA BORABORA 3048
valdez MACH_VALDEZ VALDEZ 3049
ls9g20 MACH_LS9G20 LS9G20 3050
mios_v1 MACH_MIOS_V1 MIOS_V1 3051
s5pc110_crespo MACH_S5PC110_CRESPO S5PC110_CRESPO 3052
controltek9g20 MACH_CONTROLTEK9G20 CONTROLTEK9G20 3053
tin307 MACH_TIN307 TIN307 3054
tin510 MACH_TIN510 TIN510 3055
bluecheese MACH_BLUECHEESE BLUECHEESE 3057
tem3x30 MACH_TEM3X30 TEM3X30 3058
harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059
msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062

View File

@ -121,6 +121,9 @@ static int restore_sigcontext(struct sigcontext __user *sc, int *_gr8)
struct user_context *user = current->thread.user;
unsigned long tbr, psr;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
tbr = user->i.tbr;
psr = user->i.psr;
if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context)))
@ -250,6 +253,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
struct sigframe __user *frame;
int rsig;
set_fs(USER_DS);
frame = get_sigframe(ka, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@ -293,22 +298,23 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
(unsigned long) (frame->retcode + 2));
}
/* set up registers for signal handler */
__frame->sp = (unsigned long) frame;
__frame->lr = (unsigned long) &frame->retcode;
__frame->gr8 = sig;
/* Set up registers for the signal handler */
if (current->personality & FDPIC_FUNCPTRS) {
struct fdpic_func_descriptor __user *funcptr =
(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
__get_user(__frame->pc, &funcptr->text);
__get_user(__frame->gr15, &funcptr->GOT);
struct fdpic_func_descriptor desc;
if (copy_from_user(&desc, funcptr, sizeof(desc)))
goto give_sigsegv;
__frame->pc = desc.text;
__frame->gr15 = desc.GOT;
} else {
__frame->pc = (unsigned long) ka->sa.sa_handler;
__frame->gr15 = 0;
}
set_fs(USER_DS);
__frame->sp = (unsigned long) frame;
__frame->lr = (unsigned long) &frame->retcode;
__frame->gr8 = sig;
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
@ -323,7 +329,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
return 0;
give_sigsegv:
force_sig(SIGSEGV, current);
force_sigsegv(sig, current);
return -EFAULT;
} /* end setup_frame() */
@ -338,6 +344,8 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
struct rt_sigframe __user *frame;
int rsig;
set_fs(USER_DS);
frame = get_sigframe(ka, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@ -392,22 +400,23 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
}
/* Set up registers for signal handler */
__frame->sp = (unsigned long) frame;
__frame->lr = (unsigned long) &frame->retcode;
__frame->gr8 = sig;
__frame->gr9 = (unsigned long) &frame->info;
if (current->personality & FDPIC_FUNCPTRS) {
struct fdpic_func_descriptor __user *funcptr =
(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
__get_user(__frame->pc, &funcptr->text);
__get_user(__frame->gr15, &funcptr->GOT);
struct fdpic_func_descriptor desc;
if (copy_from_user(&desc, funcptr, sizeof(desc)))
goto give_sigsegv;
__frame->pc = desc.text;
__frame->gr15 = desc.GOT;
} else {
__frame->pc = (unsigned long) ka->sa.sa_handler;
__frame->gr15 = 0;
}
set_fs(USER_DS);
__frame->sp = (unsigned long) frame;
__frame->lr = (unsigned long) &frame->retcode;
__frame->gr8 = sig;
__frame->gr9 = (unsigned long) &frame->info;
/* the tracer may want to single-step inside the handler */
if (test_thread_flag(TIF_SINGLESTEP))
@ -422,7 +431,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
return 0;
give_sigsegv:
force_sig(SIGSEGV, current);
force_sigsegv(sig, current);
return -EFAULT;
} /* end setup_rt_frame() */
@ -437,7 +446,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
int ret;
/* Are we from a system call? */
if (in_syscall(__frame)) {
if (__frame->syscallno != -1) {
/* If so, check system call restarting.. */
switch (__frame->gr8) {
case -ERESTART_RESTARTBLOCK:
@ -456,6 +465,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
__frame->gr8 = __frame->orig_gr8;
__frame->pc -= 4;
}
__frame->syscallno = -1;
}
/* Set up the stack frame */
@ -538,10 +548,11 @@ no_signal:
break;
case -ERESTART_RESTARTBLOCK:
__frame->gr8 = __NR_restart_syscall;
__frame->gr7 = __NR_restart_syscall;
__frame->pc -= 4;
break;
}
__frame->syscallno = -1;
}
/* if there's no signal to deliver, we just put the saved sigmask

View File

@ -18,7 +18,8 @@
static __inline__ int atomic_add_return(int i, atomic_t *v)
{
int ret,flags;
unsigned long flags;
int ret;
local_irq_save(flags);
ret = v->counter += i;
local_irq_restore(flags);
@ -30,7 +31,8 @@ static __inline__ int atomic_add_return(int i, atomic_t *v)
static __inline__ int atomic_sub_return(int i, atomic_t *v)
{
int ret,flags;
unsigned long flags;
int ret;
local_irq_save(flags);
ret = v->counter -= i;
local_irq_restore(flags);
@ -42,7 +44,8 @@ static __inline__ int atomic_sub_return(int i, atomic_t *v)
static __inline__ int atomic_inc_return(atomic_t *v)
{
int ret,flags;
unsigned long flags;
int ret;
local_irq_save(flags);
v->counter++;
ret = v->counter;
@ -64,7 +67,8 @@ static __inline__ int atomic_inc_return(atomic_t *v)
static __inline__ int atomic_dec_return(atomic_t *v)
{
int ret,flags;
unsigned long flags;
int ret;
local_irq_save(flags);
--v->counter;
ret = v->counter;
@ -76,7 +80,8 @@ static __inline__ int atomic_dec_return(atomic_t *v)
static __inline__ int atomic_dec_and_test(atomic_t *v)
{
int ret,flags;
unsigned long flags;
int ret;
local_irq_save(flags);
--v->counter;
ret = v->counter;

View File

@ -3,6 +3,8 @@
#include <linux/linkage.h>
struct pt_regs;
/*
* switch_to(n) should switch tasks to task ptr, first checking that
* ptr isn't the current task, in which case it does nothing. This
@ -155,6 +157,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
#define arch_align_stack(x) (x)
void die(char *str, struct pt_regs *fp, unsigned long err);
extern void die(const char *str, struct pt_regs *fp, unsigned long err);
#endif /* _H8300_SYSTEM_H */

View File

@ -56,8 +56,8 @@ int kernel_execve(const char *filename,
const char *const envp[])
{
register long res __asm__("er0");
register char *const *_c __asm__("er3") = envp;
register char *const *_b __asm__("er2") = argv;
register const char *const *_c __asm__("er3") = envp;
register const char *const *_b __asm__("er2") = argv;
register const char * _a __asm__("er1") = filename;
__asm__ __volatile__ ("mov.l %1,er0\n\t"
"trapa #0\n\t"

View File

@ -96,7 +96,7 @@ static void dump(struct pt_regs *fp)
printk("\n\n");
}
void die(char *str, struct pt_regs *fp, unsigned long err)
void die(const char *str, struct pt_regs *fp, unsigned long err)
{
static int diecount;

View File

@ -199,7 +199,7 @@ ptr_to_compat(void __user *uptr)
}
static __inline__ void __user *
compat_alloc_user_space (long len)
arch_compat_alloc_user_space (long len)
{
struct pt_regs *regs = task_pt_regs(current);
return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);

View File

@ -420,22 +420,31 @@ EX(.fail_efault, ld8 r14=[r33]) // r14 <- *set
;;
RSM_PSR_I(p0, r18, r19) // mask interrupt delivery
mov ar.ccv=0
andcm r14=r14,r17 // filter out SIGKILL & SIGSTOP
mov r8=EINVAL // default to EINVAL
#ifdef CONFIG_SMP
mov r17=1
// __ticket_spin_trylock(r31)
ld4 r17=[r31]
;;
cmpxchg4.acq r18=[r31],r17,ar.ccv // try to acquire the lock
mov r8=EINVAL // default to EINVAL
mov.m ar.ccv=r17
extr.u r9=r17,17,15
adds r19=1,r17
extr.u r18=r17,0,15
;;
cmp.eq p6,p7=r9,r18
;;
(p6) cmpxchg4.acq r9=[r31],r19,ar.ccv
(p6) dep.z r20=r19,1,15 // next serving ticket for unlock
(p7) br.cond.spnt.many .lock_contention
;;
cmp4.eq p0,p7=r9,r17
adds r31=2,r31
(p7) br.cond.spnt.many .lock_contention
ld8 r3=[r2] // re-read current->blocked now that we hold the lock
cmp4.ne p6,p0=r18,r0
(p6) br.cond.spnt.many .lock_contention
;;
#else
ld8 r3=[r2] // re-read current->blocked now that we hold the lock
mov r8=EINVAL // default to EINVAL
#endif
add r18=IA64_TASK_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r16
add r19=IA64_TASK_SIGNAL_OFFSET,r16
@ -490,7 +499,9 @@ EX(.fail_efault, ld8 r14=[r33]) // r14 <- *set
(p6) br.cond.spnt.few 1b // yes -> retry
#ifdef CONFIG_SMP
st4.rel [r31]=r0 // release the lock
// __ticket_spin_unlock(r31)
st2.rel [r31]=r20
mov r20=0 // i must not leak kernel bits...
#endif
SSM_PSR_I(p0, p9, r31)
;;
@ -512,7 +523,8 @@ EX(.fail_efault, (p15) st8 [r34]=r3)
.sig_pending:
#ifdef CONFIG_SMP
st4.rel [r31]=r0 // release the lock
// __ticket_spin_unlock(r31)
st2.rel [r31]=r20 // release the lock
#endif
SSM_PSR_I(p0, p9, r17)
;;

View File

@ -340,10 +340,13 @@
#define __NR_set_thread_area 334
#define __NR_atomic_cmpxchg_32 335
#define __NR_atomic_barrier 336
#define __NR_fanotify_init 337
#define __NR_fanotify_mark 338
#define __NR_prlimit64 339
#ifdef __KERNEL__
#define NR_syscalls 337
#define NR_syscalls 340
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR

View File

@ -765,4 +765,7 @@ sys_call_table:
.long sys_set_thread_area
.long sys_atomic_cmpxchg_32 /* 335 */
.long sys_atomic_barrier
.long sys_fanotify_init
.long sys_fanotify_mark
.long sys_prlimit64

View File

@ -355,6 +355,9 @@ ENTRY(sys_call_table)
.long sys_set_thread_area
.long sys_atomic_cmpxchg_32 /* 335 */
.long sys_atomic_barrier
.long sys_fanotify_init
.long sys_fanotify_mark
.long sys_prlimit64
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall

View File

@ -150,6 +150,8 @@ SECTIONS {
_sdata = . ;
DATA_DATA
CACHELINE_ALIGNED_DATA(32)
PAGE_ALIGNED_DATA(PAGE_SIZE)
*(.data..shared_aligned)
INIT_TASK_DATA(THREAD_SIZE)
_edata = . ;
} > DATA

View File

@ -145,7 +145,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
return (u32)(unsigned long)uptr;
}
static inline void __user *compat_alloc_user_space(long len)
static inline void __user *arch_compat_alloc_user_space(long len)
{
struct pt_regs *regs = (struct pt_regs *)
((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;

View File

@ -156,17 +156,17 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = {
._intr = &SC0ICR,
._rxb = &SC0RXB,
._txb = &SC0TXB,
.rx_name = "ttySM0/Rx",
.tx_name = "ttySM0/Tx",
.rx_name = "ttySM0:Rx",
.tx_name = "ttySM0:Tx",
#ifdef CONFIG_MN10300_TTYSM0_TIMER8
.tm_name = "ttySM0/Timer8",
.tm_name = "ttySM0:Timer8",
._tmxmd = &TM8MD,
._tmxbr = &TM8BR,
._tmicr = &TM8ICR,
.tm_irq = TM8IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
.tm_name = "ttySM0/Timer2",
.tm_name = "ttySM0:Timer2",
._tmxmd = &TM2MD,
._tmxbr = (volatile u16 *) &TM2BR,
._tmicr = &TM2ICR,
@ -209,17 +209,17 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = {
._intr = &SC1ICR,
._rxb = &SC1RXB,
._txb = &SC1TXB,
.rx_name = "ttySM1/Rx",
.tx_name = "ttySM1/Tx",
.rx_name = "ttySM1:Rx",
.tx_name = "ttySM1:Tx",
#ifdef CONFIG_MN10300_TTYSM1_TIMER9
.tm_name = "ttySM1/Timer9",
.tm_name = "ttySM1:Timer9",
._tmxmd = &TM9MD,
._tmxbr = &TM9BR,
._tmicr = &TM9ICR,
.tm_irq = TM9IRQ,
.div_timer = MNSCx_DIV_TIMER_16BIT,
#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
.tm_name = "ttySM1/Timer3",
.tm_name = "ttySM1:Timer3",
._tmxmd = &TM3MD,
._tmxbr = (volatile u16 *) &TM3BR,
._tmicr = &TM3ICR,
@ -260,9 +260,9 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = {
.uart.lock =
__SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
.name = "ttySM2",
.rx_name = "ttySM2/Rx",
.tx_name = "ttySM2/Tx",
.tm_name = "ttySM2/Timer10",
.rx_name = "ttySM2:Rx",
.tx_name = "ttySM2:Tx",
.tm_name = "ttySM2:Timer10",
._iobase = &SC2CTR,
._control = &SC2CTR,
._status = &SC2STR,

View File

@ -147,7 +147,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
return (u32)(unsigned long)uptr;
}
static __inline__ void __user *compat_alloc_user_space(long len)
static __inline__ void __user *arch_compat_alloc_user_space(long len)
{
struct pt_regs *regs = &current->thread.regs;
return (void __user *)regs->gr[30];

View File

@ -134,7 +134,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
return (u32)(unsigned long)uptr;
}
static inline void __user *compat_alloc_user_space(long len)
static inline void __user *arch_compat_alloc_user_space(long len)
{
struct pt_regs *regs = current->thread.regs;
unsigned long usp = regs->gpr[1];

View File

@ -11,6 +11,7 @@
#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
#define __ARCH_POWERPC_ASM_FSLDMA_H__
#include <linux/slab.h>
#include <linux/dmaengine.h>
/*

View File

@ -575,13 +575,19 @@ __secondary_start:
/* Initialize the kernel stack. Just a repeat for iSeries. */
LOAD_REG_ADDR(r3, current_set)
sldi r28,r24,3 /* get current_set[cpu#] */
ldx r1,r3,r28
addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
std r1,PACAKSAVE(r13)
ldx r14,r3,r28
addi r14,r14,THREAD_SIZE-STACK_FRAME_OVERHEAD
std r14,PACAKSAVE(r13)
/* Do early setup for that CPU (stab, slb, hash table pointer) */
bl .early_setup_secondary
/*
* setup the new stack pointer, but *don't* use this until
* translation is on.
*/
mr r1, r14
/* Clear backchain so we get nice backtraces */
li r7,0
mtlr r7

View File

@ -810,6 +810,9 @@ relocate_new_kernel:
isync
sync
mfspr r3, SPRN_PIR /* current core we are running on */
mr r4, r5 /* load physical address of chunk called */
/* jump to the entry point, usually the setup routine */
mtlr r5
blrl

View File

@ -577,20 +577,11 @@ void timer_interrupt(struct pt_regs * regs)
* some CPUs will continuue to take decrementer exceptions */
set_dec(DECREMENTER_MAX);
#ifdef CONFIG_PPC32
#if defined(CONFIG_PPC32) && defined(CONFIG_PMAC)
if (atomic_read(&ppc_n_lost_interrupts) != 0)
do_IRQ(regs);
#endif
now = get_tb_or_rtc();
if (now < decrementer->next_tb) {
/* not time for this event yet */
now = decrementer->next_tb - now;
if (now <= DECREMENTER_MAX)
set_dec((int)now);
trace_timer_interrupt_exit(regs);
return;
}
old_regs = set_irq_regs(regs);
irq_enter();
@ -606,8 +597,16 @@ void timer_interrupt(struct pt_regs * regs)
get_lppaca()->int_dword.fields.decr_int = 0;
#endif
if (evt->event_handler)
evt->event_handler(evt);
now = get_tb_or_rtc();
if (now >= decrementer->next_tb) {
decrementer->next_tb = ~(u64)0;
if (evt->event_handler)
evt->event_handler(evt);
} else {
now = decrementer->next_tb - now;
if (now <= DECREMENTER_MAX)
set_dec((int)now);
}
#ifdef CONFIG_PPC_ISERIES
if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())

View File

@ -48,8 +48,10 @@ static int mpc837xmds_usb_cfg(void)
return -1;
np = of_find_node_by_name(NULL, "usb");
if (!np)
return -ENODEV;
if (!np) {
ret = -ENODEV;
goto out;
}
phy_type = of_get_property(np, "phy_type", NULL);
if (phy_type && !strcmp(phy_type, "ulpi")) {
clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
@ -65,8 +67,9 @@ static int mpc837xmds_usb_cfg(void)
}
of_node_put(np);
out:
iounmap(bcsr_regs);
return 0;
return ret;
}
/* ************************************************************************

Some files were not shown because too many files have changed in this diff Show More