Merge branches 'common/dma' and 'sh/stable-updates' into sh-latest

This commit is contained in:
Paul Mundt 2011-06-16 15:12:08 +09:00
commit d0459e1afa
149 changed files with 2581 additions and 554 deletions

View File

@ -0,0 +1,56 @@
What: /sys/class/backlight/<backlight>/<ambient light zone>_max
What: /sys/class/backlight/<backlight>/l1_daylight_max
What: /sys/class/backlight/<backlight>/l2_bright_max
What: /sys/class/backlight/<backlight>/l3_office_max
What: /sys/class/backlight/<backlight>/l4_indoor_max
What: /sys/class/backlight/<backlight>/l5_dark_max
Date: Mai 2011
KernelVersion: 2.6.40
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the maximum brightness for <ambient light zone>
on this <backlight>. Values are between 0 and 127. This file
will also show the brightness level stored for this
<ambient light zone>.
What: /sys/class/backlight/<backlight>/<ambient light zone>_dim
What: /sys/class/backlight/<backlight>/l2_bright_dim
What: /sys/class/backlight/<backlight>/l3_office_dim
What: /sys/class/backlight/<backlight>/l4_indoor_dim
What: /sys/class/backlight/<backlight>/l5_dark_dim
Date: Mai 2011
KernelVersion: 2.6.40
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the dim brightness for <ambient light zone>
on this <backlight>. Values are between 0 and 127, typically
set to 0. Full off when the backlight is disabled.
This file will also show the dim brightness level stored for
this <ambient light zone>.
What: /sys/class/backlight/<backlight>/ambient_light_level
Date: Mai 2011
KernelVersion: 2.6.40
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get conversion value of the light sensor.
This value is updated every 80 ms (when the light sensor
is enabled). Returns integer between 0 (dark) and
8000 (max ambient brightness)
What: /sys/class/backlight/<backlight>/ambient_light_zone
Date: Mai 2011
KernelVersion: 2.6.40
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get/Set current ambient light zone. Reading returns
integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
Writing a value between 1..5 forces the backlight controller
to enter the corresponding ambient light zone.
Writing 0 returns to normal/automatic ambient light level
operation. The ambient light sensing feature on these devices
is an extension to the API documented in
Documentation/ABI/stable/sysfs-class-backlight.
It can be enabled by writing the value stored in
/sys/class/backlight/<backlight>/max_brightness to
/sys/class/backlight/<backlight>/brightness.

View File

@ -21,7 +21,7 @@ information will not be available.
To extract cgroup statistics a utility very similar to getdelays.c
has been developed, the sample output of the utility is shown below
~/balbir/cgroupstats # ./getdelays -C "/cgroup/a"
~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a"
sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
~/balbir/cgroupstats # ./getdelays -C "/cgroup"
~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup"
sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2

View File

@ -28,16 +28,19 @@ cgroups. Here is what you can do.
- Enable group scheduling in CFQ
CONFIG_CFQ_GROUP_IOSCHED=y
- Compile and boot into kernel and mount IO controller (blkio).
- Compile and boot into kernel and mount IO controller (blkio); see
cgroups.txt, Why are cgroups needed?.
mount -t cgroup -o blkio none /cgroup
mount -t tmpfs cgroup_root /sys/fs/cgroup
mkdir /sys/fs/cgroup/blkio
mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Create two cgroups
mkdir -p /cgroup/test1/ /cgroup/test2
mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
- Set weights of group test1 and test2
echo 1000 > /cgroup/test1/blkio.weight
echo 500 > /cgroup/test2/blkio.weight
echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
- Create two same size files (say 512MB each) on same disk (file1, file2) and
launch two dd threads in different cgroup to read those files.
@ -46,12 +49,12 @@ cgroups. Here is what you can do.
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/sdb/zerofile1 of=/dev/null &
echo $! > /cgroup/test1/tasks
cat /cgroup/test1/tasks
echo $! > /sys/fs/cgroup/blkio/test1/tasks
cat /sys/fs/cgroup/blkio/test1/tasks
dd if=/mnt/sdb/zerofile2 of=/dev/null &
echo $! > /cgroup/test2/tasks
cat /cgroup/test2/tasks
echo $! > /sys/fs/cgroup/blkio/test2/tasks
cat /sys/fs/cgroup/blkio/test2/tasks
- At macro level, first dd should finish first. To get more precise data, keep
on looking at (with the help of script), at blkio.disk_time and
@ -68,13 +71,13 @@ Throttling/Upper Limit policy
- Enable throttling in block layer
CONFIG_BLK_DEV_THROTTLING=y
- Mount blkio controller
mount -t cgroup -o blkio none /cgroup/blkio
- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
- Specify a bandwidth rate on particular device for root group. The format
for policy is "<major>:<minor> <byes_per_second>".
echo "8:16 1048576" > /cgroup/blkio/blkio.read_bps_device
echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device
Above will put a limit of 1MB/second on reads happening for root group
on device having major/minor number 8:16.
@ -108,7 +111,7 @@ Hierarchical Cgroups
CFQ and throttling will practically treat all groups at same level.
pivot
/ | \ \
/ / \ \
root test1 test2 test3
Down the line we can implement hierarchical accounting/control support
@ -149,7 +152,7 @@ Proportional weight policy files
Following is the format.
#echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
# echo dev_maj:dev_minor weight > blkio.weight_device
Configure weight=300 on /dev/sdb (8:16) in this cgroup
# echo 8:16 300 > blkio.weight_device
# cat blkio.weight_device

View File

@ -138,11 +138,11 @@ With the ability to classify tasks differently for different resources
the admin can easily set up a script which receives exec notifications
and depending on who is launching the browser he can
# echo browser_pid > /mnt/<restype>/<userclass>/tasks
# echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
With only a single hierarchy, he now would potentially have to create
a separate cgroup for every browser launched and associate it with
approp network and other resource class. This may lead to
appropriate network and other resource class. This may lead to
proliferation of such cgroups.
Also lets say that the administrator would like to give enhanced network
@ -153,9 +153,9 @@ apps enhanced CPU power,
With ability to write pids directly to resource classes, it's just a
matter of :
# echo pid > /mnt/network/<new_class>/tasks
# echo pid > /sys/fs/cgroup/network/<new_class>/tasks
(after some time)
# echo pid > /mnt/network/<orig_class>/tasks
# echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
Without this ability, he would have to split the cgroup into
multiple separate ones and then associate the new cgroups with the
@ -310,21 +310,24 @@ subsystem, this is the case for the cpuset.
To start a new job that is to be contained within a cgroup, using
the "cpuset" cgroup subsystem, the steps are something like:
1) mkdir /dev/cgroup
2) mount -t cgroup -ocpuset cpuset /dev/cgroup
3) Create the new cgroup by doing mkdir's and write's (or echo's) in
the /dev/cgroup virtual file system.
4) Start a task that will be the "founding father" of the new job.
5) Attach that task to the new cgroup by writing its pid to the
/dev/cgroup tasks file for that cgroup.
6) fork, exec or clone the job tasks from this founding father task.
1) mount -t tmpfs cgroup_root /sys/fs/cgroup
2) mkdir /sys/fs/cgroup/cpuset
3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
4) Create the new cgroup by doing mkdir's and write's (or echo's) in
the /sys/fs/cgroup virtual file system.
5) Start a task that will be the "founding father" of the new job.
6) Attach that task to the new cgroup by writing its pid to the
/sys/fs/cgroup/cpuset/tasks file for that cgroup.
7) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cgroup
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cgroup:
mount -t cgroup cpuset -ocpuset /dev/cgroup
cd /dev/cgroup
mount -t tmpfs cgroup_root /sys/fs/cgroup
mkdir /sys/fs/cgroup/cpuset
mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
@ -345,7 +348,7 @@ Creating, modifying, using the cgroups can be done through the cgroup
virtual filesystem.
To mount a cgroup hierarchy with all available subsystems, type:
# mount -t cgroup xxx /dev/cgroup
# mount -t cgroup xxx /sys/fs/cgroup
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
@ -354,23 +357,32 @@ Note: Some subsystems do not work without some user input first. For instance,
if cpusets are enabled the user will have to populate the cpus and mems files
for each new cgroup created before that group can be used.
As explained in section `1.2 Why are cgroups needed?' you should create
different hierarchies of cgroups for each single resource or group of
resources you want to control. Therefore, you should mount a tmpfs on
/sys/fs/cgroup and create directories for each cgroup resource or resource
group.
# mount -t tmpfs cgroup_root /sys/fs/cgroup
# mkdir /sys/fs/cgroup/rg1
To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
To change the set of subsystems bound to a mounted hierarchy, just
remount with different options:
# mount -o remount,cpuset,blkio hier1 /dev/cgroup
# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1
Now memory is removed from the hierarchy and blkio is added.
Note this will add blkio to the hierarchy but won't remove memory or
cpuset, because the new options are appended to the old ones:
# mount -o remount,blkio /dev/cgroup
# mount -o remount,blkio /sys/fs/cgroup/rg1
To Specify a hierarchy's release_agent:
# mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
xxx /dev/cgroup
xxx /sys/fs/cgroup/rg1
Note that specifying 'release_agent' more than once will return failure.
@ -379,17 +391,17 @@ when the hierarchy consists of a single (root) cgroup. Supporting
the ability to arbitrarily bind/unbind subsystems from an existing
cgroup hierarchy is intended to be implemented in the future.
Then under /dev/cgroup you can find a tree that corresponds to the
tree of the cgroups in the system. For instance, /dev/cgroup
Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
is the cgroup that holds the whole system.
If you want to change the value of release_agent:
# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
It can also be changed via remount.
If you want to create a new cgroup under /dev/cgroup:
# cd /dev/cgroup
If you want to create a new cgroup under /sys/fs/cgroup/rg1:
# cd /sys/fs/cgroup/rg1
# mkdir my_cgroup
Now you want to do something with this cgroup.

View File

@ -10,26 +10,25 @@ directly present in its group.
Accounting groups can be created by first mounting the cgroup filesystem.
# mkdir /cgroups
# mount -t cgroup -ocpuacct none /cgroups
# mount -t cgroup -ocpuacct none /sys/fs/cgroup
With the above step, the initial or the parent accounting group
becomes visible at /cgroups. At bootup, this group includes all the
tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
this group which is essentially the CPU time obtained by all the tasks
With the above step, the initial or the parent accounting group becomes
visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
by this group which is essentially the CPU time obtained by all the tasks
in the system.
New accounting groups can be created under the parent group /cgroups.
New accounting groups can be created under the parent group /sys/fs/cgroup.
# cd /cgroups
# cd /sys/fs/cgroup
# mkdir g1
# echo $$ > g1
The above steps create a new group g1 and move the current shell
process (bash) into it. CPU time consumed by this bash and its children
can be obtained from g1/cpuacct.usage and the same is accumulated in
/cgroups/cpuacct.usage also.
/sys/fs/cgroup/cpuacct.usage also.
cpuacct.stat file lists a few statistics which further divide the
CPU time obtained by the cgroup into user and system times. Currently

View File

@ -661,21 +661,21 @@ than stress the kernel.
To start a new job that is to be contained within a cpuset, the steps are:
1) mkdir /dev/cpuset
2) mount -t cgroup -ocpuset cpuset /dev/cpuset
1) mkdir /sys/fs/cgroup/cpuset
2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
3) Create the new cpuset by doing mkdir's and write's (or echo's) in
the /dev/cpuset virtual file system.
the /sys/fs/cgroup/cpuset virtual file system.
4) Start a task that will be the "founding father" of the new job.
5) Attach that task to the new cpuset by writing its pid to the
/dev/cpuset tasks file for that cpuset.
/sys/fs/cgroup/cpuset tasks file for that cpuset.
6) fork, exec or clone the job tasks from this founding father task.
For example, the following sequence of commands will setup a cpuset
named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
and then start a subshell 'sh' in that cpuset:
mount -t cgroup -ocpuset cpuset /dev/cpuset
cd /dev/cpuset
mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
cd /sys/fs/cgroup/cpuset
mkdir Charlie
cd Charlie
/bin/echo 2-3 > cpuset.cpus
@ -710,14 +710,14 @@ Creating, modifying, using the cpusets can be done through the cpuset
virtual filesystem.
To mount it, type:
# mount -t cgroup -o cpuset cpuset /dev/cpuset
# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
Then under /dev/cpuset you can find a tree that corresponds to the
tree of the cpusets in the system. For instance, /dev/cpuset
Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
is the cpuset that holds the whole system.
If you want to create a new cpuset under /dev/cpuset:
# cd /dev/cpuset
If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
# cd /sys/fs/cgroup/cpuset
# mkdir my_cpuset
Now you want to do something with this cpuset.
@ -765,12 +765,12 @@ wrapper around the cgroup filesystem.
The command
mount -t cpuset X /dev/cpuset
mount -t cpuset X /sys/fs/cgroup/cpuset
is equivalent to
mount -t cgroup -ocpuset,noprefix X /dev/cpuset
echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
2.2 Adding/removing cpus
------------------------

View File

@ -22,16 +22,16 @@ removed from the child(ren).
An entry is added using devices.allow, and removed using
devices.deny. For instance
echo 'c 1:3 mr' > /cgroups/1/devices.allow
echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
allows cgroup 1 to read and mknod the device usually known as
/dev/null. Doing
echo a > /cgroups/1/devices.deny
echo a > /sys/fs/cgroup/1/devices.deny
will remove the default 'a *:* rwm' entry. Doing
echo a > /cgroups/1/devices.allow
echo a > /sys/fs/cgroup/1/devices.allow
will add the 'a *:* rwm' entry to the whitelist.

View File

@ -59,28 +59,28 @@ is non-freezable.
* Examples of usage :
# mkdir /containers
# mount -t cgroup -ofreezer freezer /containers
# mkdir /containers/0
# echo $some_pid > /containers/0/tasks
# mkdir /sys/fs/cgroup/freezer
# mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
# mkdir /sys/fs/cgroup/freezer/0
# echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
to get status of the freezer subsystem :
# cat /containers/0/freezer.state
# cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
to freeze all tasks in the container :
# echo FROZEN > /containers/0/freezer.state
# cat /containers/0/freezer.state
# echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
# cat /sys/fs/cgroup/freezer/0/freezer.state
FREEZING
# cat /containers/0/freezer.state
# cat /sys/fs/cgroup/freezer/0/freezer.state
FROZEN
to unfreeze all tasks in the container :
# echo THAWED > /containers/0/freezer.state
# cat /containers/0/freezer.state
# echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
# cat /sys/fs/cgroup/freezer/0/freezer.state
THAWED
This is the basic mechanism which should do the right thing for user space task

View File

@ -1,8 +1,8 @@
Memory Resource Controller
NOTE: The Memory Resource Controller has been generically been referred
to as the memory controller in this document. Do not confuse memory
controller used here with the memory controller that is used in hardware.
NOTE: The Memory Resource Controller has generically been referred to as the
memory controller in this document. Do not confuse memory controller
used here with the memory controller that is used in hardware.
(For editors)
In this document:
@ -70,6 +70,7 @@ Brief summary of control files.
(See sysctl's vm.swappiness)
memory.move_charge_at_immigrate # set/show controls of moving charges
memory.oom_control # set/show oom controls.
memory.numa_stat # show the number of memory usage per numa node
1. History
@ -181,7 +182,7 @@ behind this approach is that a cgroup that aggressively uses a shared
page will eventually get charged for it (once it is uncharged from
the cgroup that brought it in -- this will happen on memory pressure).
Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
When you do swapoff and make swapped-out pages of shmem(tmpfs) to
be backed into memory in force, charges for pages are accounted against the
caller of swapoff rather than the users of shmem.
@ -213,7 +214,7 @@ affecting global LRU, memory+swap limit is better than just limiting swap from
OS point of view.
* What happens when a cgroup hits memory.memsw.limit_in_bytes
When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
in this cgroup. Then, swap-out will not be done by cgroup routine and file
caches are dropped. But as mentioned above, global LRU can do swapout memory
from it for sanity of the system's memory management state. You can't forbid
@ -263,16 +264,17 @@ b. Enable CONFIG_RESOURCE_COUNTERS
c. Enable CONFIG_CGROUP_MEM_RES_CTLR
d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
1. Prepare the cgroups
# mkdir -p /cgroups
# mount -t cgroup none /cgroups -o memory
1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
# mount -t tmpfs none /sys/fs/cgroup
# mkdir /sys/fs/cgroup/memory
# mount -t cgroup none /sys/fs/cgroup/memory -o memory
2. Make the new group and move bash into it
# mkdir /cgroups/0
# echo $$ > /cgroups/0/tasks
# mkdir /sys/fs/cgroup/memory/0
# echo $$ > /sys/fs/cgroup/memory/0/tasks
Since now we're in the 0 cgroup, we can alter the memory limit:
# echo 4M > /cgroups/0/memory.limit_in_bytes
# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
@ -280,11 +282,11 @@ mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
# cat /cgroups/0/memory.limit_in_bytes
# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
4194304
We can check the usage:
# cat /cgroups/0/memory.usage_in_bytes
# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
1216512
A successful write to this file does not guarantee a successful set of
@ -464,6 +466,24 @@ value for efficient access. (Of course, when necessary, it's synchronized.)
If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
value in memory.stat(see 5.2).
5.6 numa_stat
This is similar to numa_maps but operates on a per-memcg basis. This is
useful for providing visibility into the numa locality information within
an memcg since the pages are allowed to be allocated from any physical
node. One of the usecases is evaluating application performance by
combining this information with the application's cpu allocation.
We export "total", "file", "anon" and "unevictable" pages per-node for
each memcg. The ouput format of memory.numa_stat is:
total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
And we have total = file + anon + unevictable.
6. Hierarchy support
The memory controller supports a deep hierarchy and hierarchical accounting.
@ -471,13 +491,13 @@ The hierarchy is created by creating the appropriate cgroups in the
cgroup filesystem. Consider for example, the following cgroup filesystem
hierarchy
root
root
/ | \
/ | \
a b c
| \
| \
d e
/ | \
a b c
| \
| \
d e
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),

View File

@ -481,23 +481,6 @@ Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
----------------------------
What: namespace cgroup (ns_cgroup)
When: 2.6.38
Why: The ns_cgroup leads to some problems:
* cgroup creation is out-of-control
* cgroup name can conflict when pids are looping
* it is not possible to have a single process handling
a lot of namespaces without falling in a exponential creation time
* we may want to create a namespace without creating a cgroup
The ns_cgroup is replaced by a compatibility flag 'clone_children',
where a newly created cgroup will copy the parent cgroup values.
The userspace has to manually create a cgroup and add a task to
the 'tasks' file.
Who: Daniel Lezcano <daniel.lezcano@free.fr>
----------------------------
What: iwlwifi disable_hw_scan module parameters
When: 2.6.40
Why: Hareware scan is the prefer method for iwlwifi devices for

View File

@ -11,7 +11,9 @@ with the difference that the orphan objects are not freed but only
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
user-space applications.
Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
architectures.
Usage
-----

View File

@ -555,7 +555,7 @@ also have
sync_min
sync_max
The two values, given as numbers of sectors, indicate a range
withing the array where 'check'/'repair' will operate. Must be
within the array where 'check'/'repair' will operate. Must be
a multiple of chunk_size. When it reaches "sync_max" it will
pause, rather than complete.
You can use 'select' or 'poll' on "sync_completed" to wait for

View File

@ -9,7 +9,121 @@ If variable is of Type, use printk format specifier:
size_t %zu or %zx
ssize_t %zd or %zx
Raw pointer value SHOULD be printed with %p.
Raw pointer value SHOULD be printed with %p. The kernel supports
the following extended format specifiers for pointer types:
Symbols/Function Pointers:
%pF versatile_init+0x0/0x110
%pf versatile_init
%pS versatile_init+0x0/0x110
%ps versatile_init
%pB prev_fn_of_versatile_init+0x88/0x88
For printing symbols and function pointers. The 'S' and 's' specifiers
result in the symbol name with ('S') or without ('s') offsets. Where
this is used on a kernel without KALLSYMS - the symbol address is
printed instead.
The 'B' specifier results in the symbol name with offsets and should be
used when printing stack backtraces. The specifier takes into
consideration the effect of compiler optimisations which may occur
when tail-call's are used and marked with the noreturn GCC attribute.
On ia64, ppc64 and parisc64 architectures function pointers are
actually function descriptors which must first be resolved. The 'F' and
'f' specifiers perform this resolution and then provide the same
functionality as the 'S' and 's' specifiers.
Kernel Pointers:
%pK 0x01234567 or 0x0123456789abcdef
For printing kernel pointers which should be hidden from unprivileged
users. The behaviour of %pK depends on the kptr_restrict sysctl - see
Documentation/sysctl/kernel.txt for more details.
Struct Resources:
%pr [mem 0x60000000-0x6fffffff flags 0x2200] or
[mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
%pR [mem 0x60000000-0x6fffffff pref] or
[mem 0x0000000060000000-0x000000006fffffff pref]
For printing struct resources. The 'R' and 'r' specifiers result in a
printed resource with ('R') or without ('r') a decoded flags member.
MAC/FDDI addresses:
%pM 00:01:02:03:04:05
%pMF 00-01-02-03-04-05
%pm 000102030405
For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
specifiers result in a printed address with ('M') or without ('m') byte
separators. The default byte separator is the colon (':').
Where FDDI addresses are concerned the 'F' specifier can be used after
the 'M' specifier to use dash ('-') separators instead of the default
separator.
IPv4 addresses:
%pI4 1.2.3.4
%pi4 001.002.003.004
%p[Ii][hnbl]
For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
specifiers result in a printed address with ('i4') or without ('I4')
leading zeros.
The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
host, network, big or little endian order addresses respectively. Where
no specifier is provided the default network/big endian order is used.
IPv6 addresses:
%pI6 0001:0002:0003:0004:0005:0006:0007:0008
%pi6 00010002000300040005000600070008
%pI6c 1:2:3:4:5:6:7:8
For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
specifiers result in a printed address with ('I6') or without ('i6')
colon-separators. Leading zeros are always used.
The additional 'c' specifier can be used with the 'I' specifier to
print a compressed IPv6 address as described by
http://tools.ietf.org/html/rfc5952
UUID/GUID addresses:
%pUb 00010203-0405-0607-0809-0a0b0c0d0e0f
%pUB 00010203-0405-0607-0809-0A0B0C0D0E0F
%pUl 03020100-0504-0706-0809-0a0b0c0e0e0f
%pUL 03020100-0504-0706-0809-0A0B0C0E0E0F
For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
'b' and 'B' specifiers are used to specify a little endian order in
lower ('l') or upper case ('L') hex characters - and big endian order
in lower ('b') or upper case ('B') hex characters.
Where no additional specifiers are used the default little endian
order with lower case hex characters will be printed.
struct va_format:
%pV
For printing struct va_format structures. These contain a format string
and va_list as follows:
struct va_format {
const char *fmt;
va_list *va;
};
Do not use this feature without some mechanism to verify the
correctness of the format string and va_list arguments.
u64 SHOULD be printed with %llu/%llx, (unsigned long long):
@ -32,4 +146,5 @@ Reminder: sizeof() result is of type size_t.
Thank you for your cooperation and attention.
By Randy Dunlap <rdunlap@xenotime.net>
By Randy Dunlap <rdunlap@xenotime.net> and
Andrew Murray <amurray@mpc-data.co.uk>

View File

@ -223,9 +223,10 @@ When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
group created using the pseudo filesystem. See example steps below to create
task groups and modify their CPU share using the "cgroups" pseudo filesystem.
# mkdir /dev/cpuctl
# mount -t cgroup -ocpu none /dev/cpuctl
# cd /dev/cpuctl
# mount -t tmpfs cgroup_root /sys/fs/cgroup
# mkdir /sys/fs/cgroup/cpu
# mount -t cgroup -ocpu none /sys/fs/cgroup/cpu
# cd /sys/fs/cgroup/cpu
# mkdir multimedia # create "multimedia" group of tasks
# mkdir browser # create "browser" group of tasks

View File

@ -129,9 +129,8 @@ priority!
Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
CPU bandwidth to task groups.
This uses the /cgroup virtual file system and
"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
control group.
This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
to control the CPU time reserved for each control group.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
@ -150,7 +149,7 @@ For now, this can be simplified to just the following (but see Future plans):
===============
There is work in progress to make the scheduling period for each group
("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
("<cgroup>/cpu.rt_period_us") configurable as well.
The constraint on the period is that a subgroup must have a smaller or
equal period to its parent. But realistically its not very useful _yet_

View File

@ -129,12 +129,12 @@ Limit injection to pages owned by memgroup. Specified by inode number
of the memcg.
Example:
mkdir /cgroup/hwpoison
mkdir /sys/fs/cgroup/mem/hwpoison
usemem -m 100 -s 1000 &
echo `jobs -p` > /cgroup/hwpoison/tasks
echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks
memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ')
echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
page-types -p `pidof init` --hwpoison # shall do nothing

View File

@ -1889,7 +1889,6 @@ L: cpufreq@vger.kernel.org
W: http://www.codemonkey.org.uk/projects/cpufreq/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
F: arch/x86/kernel/cpu/cpufreq/
F: drivers/cpufreq/
F: include/linux/cpufreq.h
@ -3820,6 +3819,12 @@ S: Maintained
F: drivers/leds/
F: include/linux/leds.h
LEGACY EEPROM DRIVER
M: Jean Delvare <khali@linux-fr.org>
S: Maintained
F: Documentation/misc-devices/eeprom
F: drivers/misc/eeprom/eeprom.c
LEGO USB Tower driver
M: Juergen Stuber <starblue@users.sourceforge.net>
L: legousb-devel@lists.sourceforge.net
@ -4145,7 +4150,7 @@ F: include/linux/mm.h
F: mm/
MEMORY RESOURCE CONTROLLER
M: Balbir Singh <balbir@linux.vnet.ibm.com>
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: linux-mm@kvack.org
@ -4890,7 +4895,7 @@ F: mm/percpu*.c
F: arch/*/include/asm/percpu.h
PER-TASK DELAY ACCOUNTING
M: Balbir Singh <balbir@linux.vnet.ibm.com>
M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: include/linux/delayacct.h
F: kernel/delayacct.c
@ -6098,7 +6103,7 @@ F: include/target/
F: Documentation/target/
TASKSTATS STATISTICS INTERFACE
M: Balbir Singh <balbir@linux.vnet.ibm.com>
M: Balbir Singh <bsingharora@gmail.com>
S: Maintained
F: Documentation/accounting/taskstats*
F: include/linux/taskstats*
@ -6717,6 +6722,14 @@ S: Maintained
F: Documentation/filesystems/vfat.txt
F: fs/fat/
VIDEOBUF2 FRAMEWORK
M: Pawel Osciak <pawel@osciak.com>
M: Marek Szyprowski <m.szyprowski@samsung.com>
L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/video/videobuf2-*
F: include/media/videobuf2-*
VIRTIO CONSOLE DRIVER
M: Amit Shah <amit.shah@redhat.com>
L: virtualization@lists.linux-foundation.org

View File

@ -409,7 +409,7 @@ SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
return -EFAULT;
len = namelen;
if (namelen > 32)
if (len > 32)
len = 32;
down_read(&uts_sem);
@ -594,7 +594,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
down_read(&uts_sem);
res = sysinfo_table[offset];
len = strlen(res)+1;
if (len > count)
if ((unsigned long)len > (unsigned long)count)
len = count;
if (copy_to_user(buf, res, len))
err = -EFAULT;
@ -649,7 +649,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
return 1;
case GSI_GET_HWRPB:
if (nbytes < sizeof(*hwrpb))
if (nbytes > sizeof(*hwrpb))
return -EINVAL;
if (copy_to_user(buffer, hwrpb, nbytes) != 0)
return -EFAULT;
@ -1008,6 +1008,7 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
{
struct rusage r;
long ret, err;
unsigned int status = 0;
mm_segment_t old_fs;
if (!ur)
@ -1016,13 +1017,15 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
old_fs = get_fs();
set_fs (KERNEL_DS);
ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
ret = sys_wait4(pid, (unsigned int __user *) &status, options,
(struct rusage __user *) &r);
set_fs (old_fs);
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
return -EFAULT;
err = 0;
err |= put_user(status, ustatus);
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

View File

@ -691,9 +691,9 @@ proc_types:
.word 0x41069260 @ ARM926EJ-S (v5TEJ)
.word 0xff0ffff0
b __arm926ejs_mmu_cache_on
b __armv4_mmu_cache_off
b __armv5tej_mmu_cache_flush
W(b) __arm926ejs_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv5tej_mmu_cache_flush
.word 0x00007000 @ ARM7 IDs
.word 0x0000f000

View File

@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_XFS_FS=m

View File

@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y

View File

@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_SA1100=m
CONFIG_EXT2_FS=m

View File

@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SA1100=m
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set

View File

@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_PXA=m
CONFIG_EXT2_FS=y

View File

@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
unsigned long dt_root;
const char *model;
if (!dt_phys)
return NULL;
devtree = phys_to_virt(dt_phys);
/* check device tree validity */

View File

@ -435,6 +435,10 @@ __irq_usr:
usr_entry
kuser_cmpxchg_check
#ifdef CONFIG_IRQSOFF_TRACER
bl trace_hardirqs_off
#endif
get_thread_info tsk
#ifdef CONFIG_PREEMPT
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
@ -453,7 +457,7 @@ __irq_usr:
#endif
mov why, #0
b ret_to_user
b ret_to_user_from_irq
UNWIND(.fnend )
ENDPROC(__irq_usr)

View File

@ -64,6 +64,7 @@ work_resched:
ENTRY(ret_to_user)
ret_slow_syscall:
disable_irq @ disable interrupts
ENTRY(ret_to_user_from_irq)
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne work_pending
@ -75,6 +76,7 @@ no_work_pending:
arch_ret_to_user r1, lr
restore_user_regs fast = 0, offset = 0
ENDPROC(ret_to_user_from_irq)
ENDPROC(ret_to_user)
/*

View File

@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
fs = get_fs();
set_fs(KERNEL_DS);
for (i = -4; i < 1; i++) {
for (i = -4; i < 1 + !!thumb; i++) {
unsigned int val, bad;
if (thumb)
@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
if (!pmd_present(*pmd))
goto bad_access;
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
if (!pte_present(*pte) || !pte_dirty(*pte)) {
if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
pte_unmap_unlock(pte, ptl);
goto bad_access;
}

View File

@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = {
.resource = da850_mcasp_resources,
};
struct platform_device davinci_pcm_device = {
static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};

View File

@ -298,7 +298,7 @@ static void davinci_init_wdt(void)
/*-------------------------------------------------------------------------*/
struct platform_device davinci_pcm_device = {
static struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};

View File

@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = {
static void
gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct davinci_gpio_regs __iomem *g = irq2regs(irq);
struct davinci_gpio_regs __iomem *g;
u32 mask = 0xffff;
g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
/* we only care about one bank */
if (irq & 1)
mask <<= 16;
@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void)
/* set up all irqs in this bank */
irq_set_chained_handler(bank_irq, gpio_irq_handler);
irq_set_chip_data(bank_irq, (__force void *)g);
irq_set_handler_data(bank_irq, (void *)irq);
irq_set_handler_data(bank_irq, (__force void *)g);
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
irq_set_chip(irq, &gpio_irqchip);

View File

@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void)
clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
ce->cpumask = cpumask_of(smp_processor_id());
clockevents_register_device(ce);
}

View File

@ -26,6 +26,7 @@
#include <asm/hardware/debug-8250.S>
#else
#include <mach/hardware.h>
/* For EBSA285 debugging */
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
@ -36,8 +37,8 @@
.else
mov \rp, #0
.endif
orr \rv, \rp, #0x42000000
orr \rp, \rp, #dc21285_high
orr \rv, \rp, #dc21285_high
orr \rp, \rp, #0x42000000
.endm
.macro senduart,rd,rx

View File

@ -16,6 +16,8 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/processor.h> /* for cpu_relax() */
#include <mach/mxs.h>
#define OCOTP_WORD_OFFSET 0x20

View File

@ -31,7 +31,7 @@ struct clk {
bool reset;
__u16 clk_val;
__s8 usecount;
__u32 res_reg;
void __iomem * res_reg;
__u16 res_mask;
bool hw_ctrld;

View File

@ -18,6 +18,12 @@
* the defines are used for setting up the I/O memory mapping.
*/
#ifdef __ASSEMBLER__
#define IOMEM(a) (a)
#else
#define IOMEM(a) (void __iomem *) a
#endif
/* NAND Flash CS0 */
#define U300_NAND_CS0_PHYS_BASE 0x80000000
@ -47,13 +53,6 @@
#define U300_SEMI_CONFIG_BASE 0x30000000
#endif
/*
* All the following peripherals are specified at their PHYSICAL address,
* so if you need to access them (in the kernel), you MUST use the macros
* defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
* etc.
*/
/*
* AHB peripherals
*/
@ -63,11 +62,11 @@
/* Vectored Interrupt Controller 0, servicing 32 interrupts */
#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000)
#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
/* Vectored Interrupt Controller 1, servicing 32 interrupts */
#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000)
#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
/* Memory Stick Pro (MSPRO) controller */
#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
@ -115,7 +114,7 @@
/* SYSCON */
#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000)
#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
/* Watchdog */
#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
@ -125,7 +124,7 @@
/* APP side special timer */
#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000)
#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
/* Keypad */
#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
@ -181,5 +180,4 @@
* Virtual accessor macros for static devices
*/
#endif

View File

@ -411,8 +411,7 @@ static void __init u300_timer_init(void)
/* Use general purpose timer 2 as clock source */
if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
"GPT2", rate, 300, 32, clocksource_mmio_readl_up))
printk(KERN_ERR "timer: failed to initialize clock "
"source %s\n", clocksource_u300_1mhz.name);
pr_err("timer: failed to initialize U300 clock source\n");
clockevents_calc_mult_shift(&clockevent_u300_1mhz,
rate, APPTIMER_MIN_RANGE);

View File

@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = {
},
};
static void __init v2m_init_early(void)
{
ct_desc->init_early();
versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
}
static void __init v2m_timer_init(void)
{
u32 scctrl;
@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = {
},
};
static void __init v2m_init_early(void)
{
ct_desc->init_early();
clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
}
static void v2m_power_off(void)
{
if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
@ -418,8 +419,6 @@ static void __init v2m_init(void)
{
int i;
clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);

View File

@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm);
/*
* We fork()ed a process, and we need a new context for the child
* to run in.
* to run in. We reserve version 0 for initial tasks so we will
* always allocate an ASID. The ASID 0 is reserved for the TTBR
* register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
static void flush_context(void)
{
u32 ttb;
/* Copy TTBR1 into TTBR0 */
asm volatile("mrc p15, 0, %0, c2, c0, 1\n"
"mcr p15, 0, %0, c2, c0, 0"
: "=r" (ttb));
/* set the reserved ASID before flushing the TLB */
asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0));
isb();
local_flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
@ -94,7 +93,7 @@ static void reset_context(void *info)
return;
smp_rmb();
asid = cpu_last_asid + cpu;
asid = cpu_last_asid + cpu + 1;
flush_context();
set_mm_context(mm, asid);
@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm)
* to start a new version and flush the TLB.
*/
if (unlikely((asid & ~ASID_MASK) == 0)) {
asid = cpu_last_asid + smp_processor_id();
asid = cpu_last_asid + smp_processor_id() + 1;
flush_context();
#ifdef CONFIG_SMP
smp_wmb();
smp_call_function(reset_context, NULL, 1);
#endif
cpu_last_asid += NR_CPUS - 1;
cpu_last_asid += NR_CPUS;
}
set_mm_context(mm, asid);

View File

@ -330,6 +330,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
memblock_reserve(__pa(_stext), _end - _stext);
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (phys_initrd_size &&
!memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
phys_initrd_start, phys_initrd_size);
phys_initrd_start = phys_initrd_size = 0;
}
if (phys_initrd_size &&
memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
@ -635,7 +641,8 @@ void __init mem_init(void)
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
" .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .text : 0x%p" " - 0x%p" " (%4d kB)\n"
" .data : 0x%p" " - 0x%p" " (%4d kB)\n",
" .data : 0x%p" " - 0x%p" " (%4d kB)\n"
" .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
(PAGE_SIZE)),
@ -657,7 +664,8 @@ void __init mem_init(void)
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
MLK_ROUNDUP(_sdata, _edata));
MLK_ROUNDUP(_sdata, _edata),
MLK_ROUNDUP(__bss_start, __bss_stop));
#undef MLK
#undef MLM

View File

@ -146,7 +146,7 @@ __arm7tdmi_proc_info:
.long 0
.long 0
.long v4_cache_fns
.size __arm7tdmi_proc_info, . - __arm7dmi_proc_info
.size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
.type __triscenda7_proc_info, #object
__triscenda7_proc_info:

View File

@ -116,7 +116,7 @@ __arm9tdmi_proc_info:
.long 0
.long 0
.long v4_cache_fns
.size __arm9tdmi_proc_info, . - __arm9dmi_proc_info
.size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
.type __p2001_proc_info, #object
__p2001_proc_info:

View File

@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm)
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
mrc p15, 0, r2, c2, c0, 1 @ load TTB 1
mcr p15, 0, r2, c2, c0, 0 @ into TTB 0
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
#endif
mov pc, lr
ENDPROC(cpu_v7_switch_mm)

View File

@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = {
#endif
#ifdef CONFIG_SOC_IMX51
static struct sdma_script_start_addrs addr_imx51_to1 = {
static struct sdma_script_start_addrs addr_imx51 = {
.ap_2_ap_addr = 642,
.uart_2_mcu_addr = 817,
.mcu_2_app_addr = 747,
@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void)
#if defined(CONFIG_SOC_IMX51)
if (cpu_is_mx51()) {
imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
int to_version = mx51_revision() >> 4;
imx51_imx_sdma_data.pdata.to_version = to_version;
imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
} else
#endif

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_SLUB_DEBUG is not set
@ -109,7 +110,7 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_AT32AP700X=m
CONFIG_DMADEVICES=y

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -6,6 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
CONFIG_MODULES=y

View File

@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_BASE_FULL is not set
# CONFIG_COMPAT_BRK is not set

View File

@ -131,7 +131,6 @@ struct thread_struct {
*/
#define start_thread(regs, new_pc, new_sp) \
do { \
set_fs(USER_DS); \
memset(regs, 0, sizeof(*regs)); \
regs->sr = MODE_USER; \
regs->pc = new_pc & ~1; \

View File

@ -1043,8 +1043,9 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
data->regs = (void __iomem *)pdev->resource[0].start;
}
pdev->id = line;
pdata = pdev->dev.platform_data;
pdata->num = portnr;
pdata->num = line;
at32_usarts[line] = pdev;
}

View File

@ -31,8 +31,20 @@
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
#define cpu_is_at91cap9() (0)
#define cpu_is_at91cap9_revB() (0)
#define cpu_is_at91cap9_revC() (0)
#define cpu_is_at91sam9g10() (0)
#define cpu_is_at91sam9g20() (0)
#define cpu_is_at91sam9g45() (0)
#define cpu_is_at91sam9g45es() (0)
#define cpu_is_at91sam9m10() (0)
#define cpu_is_at91sam9g46() (0)
#define cpu_is_at91sam9m11() (0)
#define cpu_is_at91sam9x5() (0)
#define cpu_is_at91sam9g15() (0)
#define cpu_is_at91sam9g35() (0)
#define cpu_is_at91sam9x35() (0)
#define cpu_is_at91sam9g25() (0)
#define cpu_is_at91sam9x25() (0)
#endif /* __ASM_ARCH_CPU_H */

View File

@ -167,14 +167,12 @@ static int intc_suspend(void)
return 0;
}
static int intc_resume(void)
static void intc_resume(void)
{
int i;
for (i = 0; i < 64; i++)
intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]);
return 0;
}
#else
#define intc_suspend NULL

View File

@ -112,7 +112,7 @@ CONFIG_USB_G_SERIAL=m
CONFIG_USB_G_PRINTER=m
CONFIG_MMC=m
CONFIG_SDH_BFIN=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_BFIN=m
CONFIG_EXT2_FS=m
# CONFIG_DNOTIFY is not set

View File

@ -14,6 +14,33 @@ config GENERIC_CLOCKEVENTS
bool
default n
config M68000
bool
help
The Freescale (was Motorola) 68000 CPU is the first generation of
the well known M68K family of processors. The CPU core as well as
being available as a stand alone CPU was also used in many
System-On-Chip devices (eg 68328, 68302, etc). It does not contain
a paging MMU.
config MCPU32
bool
help
The Freescale (was then Motorola) CPU32 is a CPU core that is
based on the 68020 processor. For the most part it is used in
System-On-Chip parts, and does not contain a paging MMU.
config COLDFIRE
bool
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
The Freescale ColdFire family of processors is a modern derivitive
of the 68000 processor family. They are mainly targeted at embedded
applications, and are all System-On-Chip (SOC) devices, as opposed
to stand alone CPUs. They implement a subset of the original 68000
processor instruction set.
config COLDFIRE_SW_A7
bool
default n
@ -36,26 +63,31 @@ choice
config M68328
bool "MC68328"
select M68000
help
Motorola 68328 processor support.
config M68EZ328
bool "MC68EZ328"
select M68000
help
Motorola 68EX328 processor support.
config M68VZ328
bool "MC68VZ328"
select M68000
help
Motorola 68VZ328 processor support.
config M68360
bool "MC68360"
select MCPU32
help
Motorola 68360 processor support.
config M5206
bool "MCF5206"
select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@ -63,6 +95,7 @@ config M5206
config M5206e
bool "MCF5206e"
select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@ -70,6 +103,7 @@ config M5206e
config M520x
bool "MCF520x"
select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
help
@ -77,6 +111,7 @@ config M520x
config M523x
bool "MCF523x"
select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@ -85,6 +120,7 @@ config M523x
config M5249
bool "MCF5249"
select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@ -92,6 +128,7 @@ config M5249
config M5271
bool "MCF5271"
select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@ -99,6 +136,7 @@ config M5271
config M5272
bool "MCF5272"
select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_MBAR
help
@ -106,6 +144,7 @@ config M5272
config M5275
bool "MCF5275"
select COLDFIRE
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
help
@ -113,6 +152,7 @@ config M5275
config M528x
bool "MCF528x"
select COLDFIRE
select GENERIC_CLOCKEVENTS
select HAVE_CACHE_SPLIT
select HAVE_IPSBAR
@ -121,6 +161,7 @@ config M528x
config M5307
bool "MCF5307"
select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@ -129,12 +170,14 @@ config M5307
config M532x
bool "MCF532x"
select COLDFIRE
select HAVE_CACHE_CB
help
Freescale (Motorola) ColdFire 532x processor support.
config M5407
bool "MCF5407"
select COLDFIRE
select COLDFIRE_SW_A7
select HAVE_CACHE_CB
select HAVE_MBAR
@ -143,6 +186,7 @@ config M5407
config M547x
bool "MCF547x"
select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
@ -150,6 +194,7 @@ config M547x
config M548x
bool "MCF548x"
select COLDFIRE
select HAVE_CACHE_CB
select HAVE_MBAR
help
@ -168,13 +213,6 @@ config M54xx
depends on (M548x || M547x)
default y
config COLDFIRE
bool
depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx)
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
default y
config CLOCK_SET
bool "Enable setting the CPU clock frequency"
default n

View File

@ -14,8 +14,7 @@ EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
#if !defined(__mc68020__) && !defined(__mc68030__) && \
!defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__)
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
/*
* Simpler 68k and ColdFire parts also need a few other gcc functions.
*/

View File

@ -84,52 +84,52 @@ SECTIONS {
/* Kernel symbol table: Normal symbols */
. = ALIGN(4);
__start___ksymtab = .;
*(__ksymtab)
*(SORT(___ksymtab+*))
__stop___ksymtab = .;
/* Kernel symbol table: GPL-only symbols */
__start___ksymtab_gpl = .;
*(__ksymtab_gpl)
*(SORT(___ksymtab_gpl+*))
__stop___ksymtab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___ksymtab_unused = .;
*(__ksymtab_unused)
*(SORT(___ksymtab_unused+*))
__stop___ksymtab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___ksymtab_unused_gpl = .;
*(__ksymtab_unused_gpl)
*(SORT(___ksymtab_unused_gpl+*))
__stop___ksymtab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___ksymtab_gpl_future = .;
*(__ksymtab_gpl_future)
*(SORT(___ksymtab_gpl_future+*))
__stop___ksymtab_gpl_future = .;
/* Kernel symbol table: Normal symbols */
__start___kcrctab = .;
*(__kcrctab)
*(SORT(___kcrctab+*))
__stop___kcrctab = .;
/* Kernel symbol table: GPL-only symbols */
__start___kcrctab_gpl = .;
*(__kcrctab_gpl)
*(SORT(___kcrctab_gpl+*))
__stop___kcrctab_gpl = .;
/* Kernel symbol table: Normal unused symbols */
__start___kcrctab_unused = .;
*(__kcrctab_unused)
*(SORT(___kcrctab_unused+*))
__stop___kcrctab_unused = .;
/* Kernel symbol table: GPL-only unused symbols */
__start___kcrctab_unused_gpl = .;
*(__kcrctab_unused_gpl)
*(SORT(___kcrctab_unused_gpl+*))
__stop___kcrctab_unused_gpl = .;
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
*(__kcrctab_gpl_future)
*(SORT(___kcrctab_gpl_future+*))
__stop___kcrctab_gpl_future = .;
/* Kernel symbol table: strings */

View File

@ -34,8 +34,10 @@ void *memcpy(void *to, const void *from, size_t n)
if (temp) {
long *lto = to;
const long *lfrom = from;
#if defined(__mc68020__) || defined(__mc68030__) || \
defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
for (; temp; temp--)
*lto++ = *lfrom++;
#else
asm volatile (
" movel %2,%3\n"
" andw #7,%3\n"
@ -56,9 +58,6 @@ void *memcpy(void *to, const void *from, size_t n)
" jpl 4b"
: "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1)
: "0" (lfrom), "1" (lto), "2" (temp));
#else
for (; temp; temp--)
*lto++ = *lfrom++;
#endif
to = lto;
from = lfrom;

View File

@ -32,8 +32,10 @@ void *memset(void *s, int c, size_t count)
temp = count >> 2;
if (temp) {
long *ls = s;
#if defined(__mc68020__) || defined(__mc68030__) || \
defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
for (; temp; temp--)
*ls++ = c;
#else
size_t temp1;
asm volatile (
" movel %1,%2\n"
@ -55,9 +57,6 @@ void *memset(void *s, int c, size_t count)
" jpl 1b"
: "=a" (ls), "=d" (temp), "=&d" (temp1)
: "d" (c), "0" (ls), "1" (temp));
#else
for (; temp; temp--)
*ls++ = c;
#endif
s = ls;
}

View File

@ -19,17 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#if defined(__mc68020__) || defined(__mc68030__) || \
defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__)
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("mulu%.l %3,%1:%0" \
: "=d" ((USItype)(w0)), \
"=d" ((USItype)(w1)) \
: "%0" ((USItype)(u)), \
"dmi" ((USItype)(v)))
#else
#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)
#define SI_TYPE_SIZE 32
#define __BITS4 (SI_TYPE_SIZE / 4)
@ -61,6 +51,15 @@ Boston, MA 02111-1307, USA. */
(w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \
} while (0)
#else
#define umul_ppmm(w1, w0, u, v) \
__asm__ ("mulu%.l %3,%1:%0" \
: "=d" ((USItype)(w0)), \
"=d" ((USItype)(w1)) \
: "%0" ((USItype)(u)), \
"dmi" ((USItype)(v)))
#endif
#define __umulsidi3(u, v) \

View File

@ -678,7 +678,7 @@ CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
CONFIG_RTC_DRV_DS1307=m

View File

@ -85,7 +85,7 @@ CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_STORAGE=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m

View File

@ -141,7 +141,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_STORAGE=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PS3=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m

View File

@ -20,6 +20,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/spi/spi.h>
@ -232,6 +233,52 @@ static struct platform_device usb1_common_device = {
.resource = usb1_common_resources,
};
/*
* USBHS
*/
static int usbhs_get_id(struct platform_device *pdev)
{
return gpio_get_value(GPIO_PTB3);
}
static struct renesas_usbhs_platform_info usbhs_info = {
.platform_callback = {
.get_id = usbhs_get_id,
},
.driver_param = {
.buswait_bwait = 4,
.detection_delay = 5,
},
};
static struct resource usbhs_resources[] = {
[0] = {
.start = 0xa4d90000,
.end = 0xa4d90124 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 66,
.end = 66,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usbhs_device = {
.name = "renesas_usbhs",
.id = 1,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &usbhs_info,
},
.num_resources = ARRAY_SIZE(usbhs_resources),
.resource = usbhs_resources,
.archdata = {
.hwblk_id = HWBLK_USB1,
},
};
/* LCDC */
const static struct fb_videomode ecovec_lcd_modes[] = {
{
@ -897,6 +944,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
&sh_eth_device,
&usb0_host_device,
&usb1_common_device,
&usbhs_device,
&lcdc_device,
&ceu0_device,
&ceu1_device,

View File

@ -227,7 +227,7 @@ CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SH=m
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y

View File

@ -298,6 +298,14 @@ enum {
SHDMA_SLAVE_SCIF4_RX,
SHDMA_SLAVE_SCIF5_TX,
SHDMA_SLAVE_SCIF5_RX,
SHDMA_SLAVE_USB0D0_TX,
SHDMA_SLAVE_USB0D0_RX,
SHDMA_SLAVE_USB0D1_TX,
SHDMA_SLAVE_USB0D1_RX,
SHDMA_SLAVE_USB1D0_TX,
SHDMA_SLAVE_USB1D0_RX,
SHDMA_SLAVE_USB1D1_TX,
SHDMA_SLAVE_USB1D1_RX,
SHDMA_SLAVE_SDHI0_TX,
SHDMA_SLAVE_SDHI0_RX,
SHDMA_SLAVE_SDHI1_TX,

View File

@ -92,6 +92,46 @@ static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = {
.addr = 0xa4e50024,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x36,
}, {
.slave_id = SHDMA_SLAVE_USB0D0_TX,
.addr = 0xA4D80100,
.chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x73,
}, {
.slave_id = SHDMA_SLAVE_USB0D0_RX,
.addr = 0xA4D80100,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x73,
}, {
.slave_id = SHDMA_SLAVE_USB0D1_TX,
.addr = 0xA4D80120,
.chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x77,
}, {
.slave_id = SHDMA_SLAVE_USB0D1_RX,
.addr = 0xA4D80120,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0x77,
}, {
.slave_id = SHDMA_SLAVE_USB1D0_TX,
.addr = 0xA4D90100,
.chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xab,
}, {
.slave_id = SHDMA_SLAVE_USB1D0_RX,
.addr = 0xA4D90100,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xab,
}, {
.slave_id = SHDMA_SLAVE_USB1D1_TX,
.addr = 0xA4D90120,
.chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xaf,
}, {
.slave_id = SHDMA_SLAVE_USB1D1_RX,
.addr = 0xA4D90120,
.chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
.mid_rid = 0xaf,
}, {
.slave_id = SHDMA_SLAVE_SDHI0_TX,
.addr = 0x04ce0030,

View File

@ -632,14 +632,14 @@ late_initcall(uv_init_heartbeat);
/* Direct Legacy VGA I/O traffic to designated IOH */
int uv_set_vga_state(struct pci_dev *pdev, bool decode,
unsigned int command_bits, bool change_bridge)
unsigned int command_bits, u32 flags)
{
int domain, bus, rc;
PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n",
pdev->devfn, decode, command_bits, change_bridge);
PR_DEVEL("devfn %x decode %d cmd %x flags %d\n",
pdev->devfn, decode, command_bits, flags);
if (!change_bridge)
if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE))
return 0;
if ((command_bits & PCI_COMMAND_IO) == 0)

View File

@ -337,7 +337,7 @@ EXPORT_SYMBOL(boot_option_idle_override);
* Powermanagement idle function, if any..
*/
void (*pm_idle)(void);
#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(pm_idle);
#endif
@ -399,7 +399,7 @@ void default_idle(void)
cpu_relax();
}
}
#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE)
#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
#endif

View File

@ -163,11 +163,32 @@ static irqreturn_t hpet_interrupt(int irq, void *data)
* This has the effect of treating non-periodic like periodic.
*/
if ((devp->hd_flags & (HPET_IE | HPET_PERIODIC)) == HPET_IE) {
unsigned long m, t;
unsigned long m, t, mc, base, k;
struct hpet __iomem *hpet = devp->hd_hpet;
struct hpets *hpetp = devp->hd_hpets;
t = devp->hd_ireqfreq;
m = read_counter(&devp->hd_timer->hpet_compare);
write_counter(t + m, &devp->hd_timer->hpet_compare);
mc = read_counter(&hpet->hpet_mc);
/* The time for the next interrupt would logically be t + m,
* however, if we are very unlucky and the interrupt is delayed
* for longer than t then we will completely miss the next
* interrupt if we set t + m and an application will hang.
* Therefore we need to make a more complex computation assuming
* that there exists a k for which the following is true:
* k * t + base < mc + delta
* (k + 1) * t + base > mc + delta
* where t is the interval in hpet ticks for the given freq,
* base is the theoretical start value 0 < base < t,
* mc is the main counter value at the time of the interrupt,
* delta is the time it takes to write the a value to the
* comparator.
* k may then be computed as (mc - base + delta) / t .
*/
base = mc % t;
k = (mc - base + hpetp->hp_delta) / t;
write_counter(t * (k + 1) + base,
&devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)

View File

@ -387,6 +387,7 @@ static void __exit cpufreq_stats_exit(void)
unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
for_each_online_cpu(cpu) {
cpufreq_stats_free_table(cpu);
cpufreq_stats_free_sysfs(cpu);
}
}

View File

@ -130,8 +130,7 @@ static bool dmae_is_busy(struct sh_dmae_chan *sh_chan)
static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr)
{
struct sh_dmae_device *shdev = container_of(sh_chan->common.device,
struct sh_dmae_device, common);
struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
struct sh_dmae_pdata *pdata = shdev->pdata;
int cnt = ((chcr & pdata->ts_low_mask) >> pdata->ts_low_shift) |
((chcr & pdata->ts_high_mask) >> pdata->ts_high_shift);
@ -144,8 +143,7 @@ static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr)
static u32 log2size_to_chcr(struct sh_dmae_chan *sh_chan, int l2size)
{
struct sh_dmae_device *shdev = container_of(sh_chan->common.device,
struct sh_dmae_device, common);
struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
struct sh_dmae_pdata *pdata = shdev->pdata;
int i;
@ -209,12 +207,11 @@ static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
{
struct sh_dmae_device *shdev = container_of(sh_chan->common.device,
struct sh_dmae_device, common);
struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
struct sh_dmae_pdata *pdata = shdev->pdata;
const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->id];
u16 __iomem *addr = shdev->dmars;
int shift = chan_pdata->dmars_bit;
unsigned int shift = chan_pdata->dmars_bit;
if (dmae_is_busy(sh_chan))
return -EBUSY;
@ -296,9 +293,7 @@ static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan)
static const struct sh_dmae_slave_config *sh_dmae_find_slave(
struct sh_dmae_chan *sh_chan, struct sh_dmae_slave *param)
{
struct dma_device *dma_dev = sh_chan->common.device;
struct sh_dmae_device *shdev = container_of(dma_dev,
struct sh_dmae_device, common);
struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
struct sh_dmae_pdata *pdata = shdev->pdata;
int i;
@ -771,10 +766,8 @@ static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
spin_lock_bh(&sh_chan->desc_lock);
/* DMA work check */
if (dmae_is_busy(sh_chan)) {
spin_unlock_bh(&sh_chan->desc_lock);
return;
}
if (dmae_is_busy(sh_chan))
goto sh_chan_xfer_ld_queue_end;
/* Find the first not transferred descriptor */
list_for_each_entry(desc, &sh_chan->ld_queue, node)
@ -788,6 +781,7 @@ static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
break;
}
sh_chan_xfer_ld_queue_end:
spin_unlock_bh(&sh_chan->desc_lock);
}

View File

@ -52,5 +52,7 @@ struct sh_dmae_device {
#define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, common)
#define to_sh_desc(lh) container_of(lh, struct sh_desc, node)
#define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx)
#define to_sh_dev(chan) container_of(chan->common.device,\
struct sh_dmae_device, common)
#endif /* __DMA_SHDMA_H */

View File

@ -46,10 +46,11 @@ static struct drm_map_list *drm_find_matching_map(struct drm_device *dev,
list_for_each_entry(entry, &dev->maplist, head) {
/*
* Because the kernel-userspace ABI is fixed at a 32-bit offset
* while PCI resources may live above that, we ignore the map
* offset for maps of type _DRM_FRAMEBUFFER or _DRM_REGISTERS.
* It is assumed that each driver will have only one resource of
* each type.
* while PCI resources may live above that, we only compare the
* lower 32 bits of the map offset for maps of type
* _DRM_FRAMEBUFFER or _DRM_REGISTERS.
* It is assumed that if a driver have more than one resource
* of each type, the lower 32 bits are different.
*/
if (!entry->map ||
map->type != entry->map->type ||
@ -59,9 +60,12 @@ static struct drm_map_list *drm_find_matching_map(struct drm_device *dev,
case _DRM_SHM:
if (map->flags != _DRM_CONTAINS_LOCK)
break;
return entry;
case _DRM_REGISTERS:
case _DRM_FRAME_BUFFER:
return entry;
if ((entry->map->offset & 0xffffffff) ==
(map->offset & 0xffffffff))
return entry;
default: /* Make gcc happy */
;
}
@ -182,9 +186,6 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
kfree(map);
return -EINVAL;
}
#endif
#ifdef __alpha__
map->offset += dev->hose->mem_space->start;
#endif
/* Some drivers preinitialize some maps, without the X Server
* needing to be aware of it. Therefore, we just return success

View File

@ -1113,7 +1113,7 @@ int drm_mode_getresources(struct drm_device *dev, void *data,
if (card_res->count_fbs >= fb_count) {
copied = 0;
fb_id = (uint32_t __user *)(unsigned long)card_res->fb_id_ptr;
list_for_each_entry(fb, &file_priv->fbs, head) {
list_for_each_entry(fb, &file_priv->fbs, filp_head) {
if (put_user(fb->base.id, fb_id + copied)) {
ret = -EFAULT;
goto out;

View File

@ -526,7 +526,7 @@ static int drm_mmap_dma(struct file *filp, struct vm_area_struct *vma)
static resource_size_t drm_core_get_reg_ofs(struct drm_device *dev)
{
#ifdef __alpha__
return dev->hose->dense_mem_base - dev->hose->mem_space->start;
return dev->hose->dense_mem_base;
#else
return 0;
#endif

View File

@ -465,8 +465,10 @@ i915_gem_shmem_pread_slow(struct drm_device *dev,
page = read_cache_page_gfp(mapping, offset >> PAGE_SHIFT,
GFP_HIGHUSER | __GFP_RECLAIMABLE);
if (IS_ERR(page))
return PTR_ERR(page);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
goto out;
}
if (do_bit17_swizzling) {
slow_shmem_bit17_copy(page,

View File

@ -195,29 +195,10 @@ extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
#define mga_flush_write_combine() DRM_WRITEMEMORYBARRIER()
#if defined(__linux__) && defined(__alpha__)
#define MGA_BASE(reg) ((unsigned long)(dev_priv->mmio->handle))
#define MGA_ADDR(reg) (MGA_BASE(reg) + reg)
#define MGA_DEREF(reg) (*(volatile u32 *)MGA_ADDR(reg))
#define MGA_DEREF8(reg) (*(volatile u8 *)MGA_ADDR(reg))
#define MGA_READ(reg) (_MGA_READ((u32 *)MGA_ADDR(reg)))
#define MGA_READ8(reg) (_MGA_READ((u8 *)MGA_ADDR(reg)))
#define MGA_WRITE(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF(reg) = val; } while (0)
#define MGA_WRITE8(reg, val) do { DRM_WRITEMEMORYBARRIER(); MGA_DEREF8(reg) = val; } while (0)
static inline u32 _MGA_READ(u32 *addr)
{
DRM_MEMORYBARRIER();
return *(volatile u32 *)addr;
}
#else
#define MGA_READ8(reg) DRM_READ8(dev_priv->mmio, (reg))
#define MGA_READ(reg) DRM_READ32(dev_priv->mmio, (reg))
#define MGA_WRITE8(reg, val) DRM_WRITE8(dev_priv->mmio, (reg), (val))
#define MGA_WRITE(reg, val) DRM_WRITE32(dev_priv->mmio, (reg), (val))
#endif
#define DWGREG0 0x1c00
#define DWGREG0_END 0x1dff

View File

@ -2944,7 +2944,7 @@ restart_ih:
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
DRM_DEBUG("IH: CP EOP\n");
DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;

View File

@ -63,7 +63,7 @@ struct r100_cs_track {
unsigned num_arrays;
unsigned max_indx;
unsigned color_channel_mask;
struct r100_cs_track_array arrays[11];
struct r100_cs_track_array arrays[16];
struct r100_cs_track_cb cb[R300_MAX_CB];
struct r100_cs_track_cb zb;
struct r100_cs_track_cb aa;
@ -146,6 +146,12 @@ static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
ib = p->ib->ptr;
track = (struct r100_cs_track *)p->track;
c = radeon_get_ib_value(p, idx++) & 0x1F;
if (c > 16) {
DRM_ERROR("Only 16 vertex buffers are allowed %d\n",
pkt->opcode);
r100_cs_dump_packet(p, pkt);
return -EINVAL;
}
track->num_arrays = c;
for (i = 0; i < (c - 1); i+=2, idx+=3) {
r = r100_cs_packet_next_reloc(p, &reloc);

View File

@ -3444,7 +3444,7 @@ restart_ih:
radeon_fence_process(rdev);
break;
case 233: /* GUI IDLE */
DRM_DEBUG("IH: CP EOP\n");
DRM_DEBUG("IH: GUI idle\n");
rdev->pm.gui_idle = true;
wake_up(&rdev->irq.idle_queue);
break;

View File

@ -165,6 +165,7 @@ struct radeon_clock {
uint32_t default_sclk;
uint32_t default_dispclk;
uint32_t dp_extclk;
uint32_t max_pixel_clock;
};
/*

View File

@ -1246,6 +1246,10 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
}
*dcpll = *p1pll;
rdev->clock.max_pixel_clock = le16_to_cpu(firmware_info->info.usMaxPixelClock);
if (rdev->clock.max_pixel_clock == 0)
rdev->clock.max_pixel_clock = 40000;
return true;
}

View File

@ -117,7 +117,7 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev)
p1pll->reference_div = RREG32_PLL(RADEON_PPLL_REF_DIV) & 0x3ff;
if (p1pll->reference_div < 2)
p1pll->reference_div = 12;
p2pll->reference_div = p1pll->reference_div;
p2pll->reference_div = p1pll->reference_div;
/* These aren't in the device-tree */
if (rdev->family >= CHIP_R420) {
@ -139,6 +139,8 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev)
p2pll->pll_out_min = 12500;
p2pll->pll_out_max = 35000;
}
/* not sure what the max should be in all cases */
rdev->clock.max_pixel_clock = 35000;
spll->reference_freq = mpll->reference_freq = p1pll->reference_freq;
spll->reference_div = mpll->reference_div =
@ -151,7 +153,7 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev)
else
rdev->clock.default_sclk =
radeon_legacy_get_engine_clock(rdev);
val = of_get_property(dp, "ATY,MCLK", NULL);
if (val && *val)
rdev->clock.default_mclk = (*val) / 10;
@ -160,7 +162,7 @@ static bool __devinit radeon_read_clocks_OF(struct drm_device *dev)
radeon_legacy_get_memory_clock(rdev);
DRM_INFO("Using device-tree clock info\n");
return true;
}
#else

View File

@ -866,6 +866,11 @@ bool radeon_combios_get_clock_info(struct drm_device *dev)
rdev->clock.default_sclk = sclk;
rdev->clock.default_mclk = mclk;
if (RBIOS32(pll_info + 0x16))
rdev->clock.max_pixel_clock = RBIOS32(pll_info + 0x16);
else
rdev->clock.max_pixel_clock = 35000; /* might need something asic specific */
return true;
}
return false;
@ -1548,9 +1553,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
(rdev->pdev->subsystem_device == 0x4a48)) {
/* Mac X800 */
rdev->mode_info.connector_table = CT_MAC_X800;
} else if ((rdev->pdev->device == 0x4150) &&
(rdev->pdev->subsystem_vendor == 0x1002) &&
(rdev->pdev->subsystem_device == 0x4150)) {
} else if (of_machine_is_compatible("PowerMac7,2") ||
of_machine_is_compatible("PowerMac7,3")) {
/* Mac G5 9600 */
rdev->mode_info.connector_table = CT_MAC_G5_9600;
} else

View File

@ -626,8 +626,14 @@ static int radeon_vga_get_modes(struct drm_connector *connector)
static int radeon_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *dev = connector->dev;
struct radeon_device *rdev = dev->dev_private;
/* XXX check mode bandwidth */
/* XXX verify against max DAC output frequency */
if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
return MODE_CLOCK_HIGH;
return MODE_OK;
}
@ -1015,6 +1021,11 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector,
} else
return MODE_CLOCK_HIGH;
}
/* check against the max pixel clock */
if ((mode->clock / 10) > rdev->clock.max_pixel_clock)
return MODE_CLOCK_HIGH;
return MODE_OK;
}

View File

@ -647,9 +647,6 @@ int savage_driver_firstopen(struct drm_device *dev)
ret = drm_addmap(dev, aperture_base, SAVAGE_APERTURE_SIZE,
_DRM_FRAME_BUFFER, _DRM_WRITE_COMBINING,
&dev_priv->aperture);
if (ret)
return ret;
return ret;
}

View File

@ -1,3 +1,10 @@
config LEDS_GPIO_REGISTER
bool
help
This option provides the function gpio_led_register_device.
As this function is used by arch code it must not be compiled as a
module.
menuconfig NEW_LEDS
bool "LED Support"
help
@ -7,22 +14,14 @@ menuconfig NEW_LEDS
This is not related to standard keyboard LEDs which are controlled
via the input system.
if NEW_LEDS
config LEDS_CLASS
bool "LED Class Support"
depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
config LEDS_GPIO_REGISTER
bool
help
This option provides the function gpio_led_register_device.
As this function is used by arch code it must not be compiled as a
module.
if NEW_LEDS
comment "LED drivers"
config LEDS_88PM860X
@ -391,6 +390,7 @@ config LEDS_NETXBIG
config LEDS_ASIC3
bool "LED support for the HTC ASIC3"
depends on LEDS_CLASS
depends on MFD_ASIC3
default y
help

View File

@ -534,6 +534,82 @@ void bitmap_print_sb(struct bitmap *bitmap)
kunmap_atomic(sb, KM_USER0);
}
/*
* bitmap_new_disk_sb
* @bitmap
*
* This function is somewhat the reverse of bitmap_read_sb. bitmap_read_sb
* reads and verifies the on-disk bitmap superblock and populates bitmap_info.
* This function verifies 'bitmap_info' and populates the on-disk bitmap
* structure, which is to be written to disk.
*
* Returns: 0 on success, -Exxx on error
*/
static int bitmap_new_disk_sb(struct bitmap *bitmap)
{
bitmap_super_t *sb;
unsigned long chunksize, daemon_sleep, write_behind;
int err = -EINVAL;
bitmap->sb_page = alloc_page(GFP_KERNEL);
if (IS_ERR(bitmap->sb_page)) {
err = PTR_ERR(bitmap->sb_page);
bitmap->sb_page = NULL;
return err;
}
bitmap->sb_page->index = 0;
sb = kmap_atomic(bitmap->sb_page, KM_USER0);
sb->magic = cpu_to_le32(BITMAP_MAGIC);
sb->version = cpu_to_le32(BITMAP_MAJOR_HI);
chunksize = bitmap->mddev->bitmap_info.chunksize;
BUG_ON(!chunksize);
if (!is_power_of_2(chunksize)) {
kunmap_atomic(sb, KM_USER0);
printk(KERN_ERR "bitmap chunksize not a power of 2\n");
return -EINVAL;
}
sb->chunksize = cpu_to_le32(chunksize);
daemon_sleep = bitmap->mddev->bitmap_info.daemon_sleep;
if (!daemon_sleep ||
(daemon_sleep < 1) || (daemon_sleep > MAX_SCHEDULE_TIMEOUT)) {
printk(KERN_INFO "Choosing daemon_sleep default (5 sec)\n");
daemon_sleep = 5 * HZ;
}
sb->daemon_sleep = cpu_to_le32(daemon_sleep);
bitmap->mddev->bitmap_info.daemon_sleep = daemon_sleep;
/*
* FIXME: write_behind for RAID1. If not specified, what
* is a good choice? We choose COUNTER_MAX / 2 arbitrarily.
*/
write_behind = bitmap->mddev->bitmap_info.max_write_behind;
if (write_behind > COUNTER_MAX)
write_behind = COUNTER_MAX / 2;
sb->write_behind = cpu_to_le32(write_behind);
bitmap->mddev->bitmap_info.max_write_behind = write_behind;
/* keep the array size field of the bitmap superblock up to date */
sb->sync_size = cpu_to_le64(bitmap->mddev->resync_max_sectors);
memcpy(sb->uuid, bitmap->mddev->uuid, 16);
bitmap->flags |= BITMAP_STALE;
sb->state |= cpu_to_le32(BITMAP_STALE);
bitmap->events_cleared = bitmap->mddev->events;
sb->events_cleared = cpu_to_le64(bitmap->mddev->events);
bitmap->flags |= BITMAP_HOSTENDIAN;
sb->version = cpu_to_le32(BITMAP_MAJOR_HOSTENDIAN);
kunmap_atomic(sb, KM_USER0);
return 0;
}
/* read the superblock from the bitmap file and initialize some bitmap fields */
static int bitmap_read_sb(struct bitmap *bitmap)
{
@ -575,7 +651,7 @@ static int bitmap_read_sb(struct bitmap *bitmap)
reason = "unrecognized superblock version";
else if (chunksize < 512)
reason = "bitmap chunksize too small";
else if ((1 << ffz(~chunksize)) != chunksize)
else if (!is_power_of_2(chunksize))
reason = "bitmap chunksize not a power of 2";
else if (daemon_sleep < 1 || daemon_sleep > MAX_SCHEDULE_TIMEOUT)
reason = "daemon sleep period out of range";
@ -1076,8 +1152,8 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
}
printk(KERN_INFO "%s: bitmap initialized from disk: "
"read %lu/%lu pages, set %lu bits\n",
bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt);
"read %lu/%lu pages, set %lu of %lu bits\n",
bmname(bitmap), bitmap->file_pages, num_pages, bit_cnt, chunks);
return 0;
@ -1332,7 +1408,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect
return 0;
}
if (unlikely((*bmc & COUNTER_MAX) == COUNTER_MAX)) {
if (unlikely(COUNTER(*bmc) == COUNTER_MAX)) {
DEFINE_WAIT(__wait);
/* note that it is safe to do the prepare_to_wait
* after the test as long as we do it before dropping
@ -1404,10 +1480,10 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
sysfs_notify_dirent_safe(bitmap->sysfs_can_clear);
}
if (!success && ! (*bmc & NEEDED_MASK))
if (!success && !NEEDED(*bmc))
*bmc |= NEEDED_MASK;
if ((*bmc & COUNTER_MAX) == COUNTER_MAX)
if (COUNTER(*bmc) == COUNTER_MAX)
wake_up(&bitmap->overflow_wait);
(*bmc)--;
@ -1728,9 +1804,16 @@ int bitmap_create(mddev_t *mddev)
vfs_fsync(file, 1);
}
/* read superblock from bitmap file (this sets mddev->bitmap_info.chunksize) */
if (!mddev->bitmap_info.external)
err = bitmap_read_sb(bitmap);
else {
if (!mddev->bitmap_info.external) {
/*
* If 'MD_ARRAY_FIRST_USE' is set, then device-mapper is
* instructing us to create a new on-disk bitmap instance.
*/
if (test_and_clear_bit(MD_ARRAY_FIRST_USE, &mddev->flags))
err = bitmap_new_disk_sb(bitmap);
else
err = bitmap_read_sb(bitmap);
} else {
err = 0;
if (mddev->bitmap_info.chunksize == 0 ||
mddev->bitmap_info.daemon_sleep == 0)
@ -1754,9 +1837,6 @@ int bitmap_create(mddev_t *mddev)
bitmap->chunks = chunks;
bitmap->pages = pages;
bitmap->missing_pages = pages;
bitmap->counter_bits = COUNTER_BITS;
bitmap->syncchunk = ~0UL;
#ifdef INJECT_FATAL_FAULT_1
bitmap->bp = NULL;

View File

@ -85,7 +85,6 @@
typedef __u16 bitmap_counter_t;
#define COUNTER_BITS 16
#define COUNTER_BIT_SHIFT 4
#define COUNTER_BYTE_RATIO (COUNTER_BITS / 8)
#define COUNTER_BYTE_SHIFT (COUNTER_BIT_SHIFT - 3)
#define NEEDED_MASK ((bitmap_counter_t) (1 << (COUNTER_BITS - 1)))
@ -196,19 +195,10 @@ struct bitmap {
mddev_t *mddev; /* the md device that the bitmap is for */
int counter_bits; /* how many bits per block counter */
/* bitmap chunksize -- how much data does each bit represent? */
unsigned long chunkshift; /* chunksize = 2^chunkshift (for bitops) */
unsigned long chunks; /* total number of data chunks for the array */
/* We hold a count on the chunk currently being synced, and drop
* it when the last block is started. If the resync is aborted
* midway, we need to be able to drop that count, so we remember
* the counted chunk..
*/
unsigned long syncchunk;
__u64 events_cleared;
int need_sync;

Some files were not shown because too many files have changed in this diff Show More