serial: exar: split out the exar code from 8250_pci

Add the serial driver for the Exar chips. And also register the
platform device for the GPIO provided by the Exar chips.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Sudip Mukherjee 2017-01-30 22:28:21 +00:00 committed by Greg Kroah-Hartman
parent bc2be239fe
commit d0aeaa83f0
3 changed files with 401 additions and 0 deletions

View File

@ -0,0 +1,396 @@
/*
* Probe module for 8250/16550-type Exar chips PCI serial ports.
*
* Based on drivers/tty/serial/8250/8250_pci.c,
*
* Copyright (C) 2017 Sudip Mukherjee, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/8250_pci.h>
#include <asm/byteorder.h>
#include "8250.h"
#define PCI_DEVICE_ID_COMMTECH_4224PCIE 0x0020
#define PCI_DEVICE_ID_COMMTECH_4228PCIE 0x0021
#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
#define UART_EXAR_MPIOINT_7_0 0x8f /* MPIOINT[7:0] */
#define UART_EXAR_MPIOLVL_7_0 0x90 /* MPIOLVL[7:0] */
#define UART_EXAR_MPIO3T_7_0 0x91 /* MPIO3T[7:0] */
#define UART_EXAR_MPIOINV_7_0 0x92 /* MPIOINV[7:0] */
#define UART_EXAR_MPIOSEL_7_0 0x93 /* MPIOSEL[7:0] */
#define UART_EXAR_MPIOOD_7_0 0x94 /* MPIOOD[7:0] */
#define UART_EXAR_MPIOINT_15_8 0x95 /* MPIOINT[15:8] */
#define UART_EXAR_MPIOLVL_15_8 0x96 /* MPIOLVL[15:8] */
#define UART_EXAR_MPIO3T_15_8 0x97 /* MPIO3T[15:8] */
#define UART_EXAR_MPIOINV_15_8 0x98 /* MPIOINV[15:8] */
#define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */
#define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */
struct exar8250;
/**
* struct exar8250_board - board information
* @num_ports: number of serial ports
* @reg_shift: describes UART register mapping in PCI memory
*/
struct exar8250_board {
unsigned int num_ports;
unsigned int reg_shift;
bool has_slave;
int (*setup)(struct exar8250 *, struct pci_dev *,
struct uart_8250_port *, int);
void (*exit)(struct pci_dev *pcidev);
};
struct exar8250 {
unsigned int nr;
struct exar8250_board *board;
int line[0];
};
static int default_setup(struct exar8250 *priv, struct pci_dev *pcidev,
int idx, unsigned int offset,
struct uart_8250_port *port)
{
const struct exar8250_board *board = priv->board;
unsigned int bar = 0;
port->port.iotype = UPIO_MEM;
port->port.mapbase = pci_resource_start(pcidev, bar) + offset;
port->port.membase = pcim_iomap_table(pcidev)[bar] + offset;
port->port.regshift = board->reg_shift;
return 0;
}
static int
pci_connect_tech_setup(struct exar8250 *priv, struct pci_dev *pcidev,
struct uart_8250_port *port, int idx)
{
unsigned int offset = idx * 0x200;
unsigned int baud = 1843200;
port->port.uartclk = baud * 16;
return default_setup(priv, pcidev, idx, offset, port);
}
static int
pci_xr17c154_setup(struct exar8250 *priv, struct pci_dev *pcidev,
struct uart_8250_port *port, int idx)
{
unsigned int offset = idx * 0x200;
unsigned int baud = 921600;
port->port.uartclk = baud * 16;
return default_setup(priv, pcidev, idx, offset, port);
}
static void setup_gpio(u8 __iomem *p)
{
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
writeb(0x00, p + UART_EXAR_MPIOINT_15_8);
writeb(0x00, p + UART_EXAR_MPIOLVL_15_8);
writeb(0x00, p + UART_EXAR_MPIO3T_15_8);
writeb(0x00, p + UART_EXAR_MPIOINV_15_8);
writeb(0x00, p + UART_EXAR_MPIOSEL_15_8);
writeb(0x00, p + UART_EXAR_MPIOOD_15_8);
}
static void *
xr17v35x_register_gpio(struct pci_dev *pcidev)
{
struct platform_device *pdev;
pdev = platform_device_alloc("gpio_exar", PLATFORM_DEVID_AUTO);
if (!pdev)
return NULL;
platform_set_drvdata(pdev, pcidev);
if (platform_device_add(pdev) < 0) {
platform_device_put(pdev);
return NULL;
}
return pdev;
}
static int
pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
struct uart_8250_port *port, int idx)
{
const struct exar8250_board *board = priv->board;
unsigned int offset = idx * 0x400;
unsigned int baud = 7812500;
u8 __iomem *p;
int ret;
port->port.uartclk = baud * 16;
/*
* Setup the uart clock for the devices on expansion slot to
* half the clock speed of the main chip (which is 125MHz)
*/
if (board->has_slave && idx >= 8)
port->port.uartclk /= 2;
p = pci_ioremap_bar(pcidev, 0);
if (!p)
return -ENOMEM;
/* Setup Multipurpose Input/Output pins. */
if (idx == 0)
setup_gpio(p);
writeb(0x00, p + UART_EXAR_8XMODE);
writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
writeb(128, p + UART_EXAR_TXTRG);
writeb(128, p + UART_EXAR_RXTRG);
iounmap(p);
ret = default_setup(priv, pcidev, idx, offset, port);
if (ret)
return ret;
if (idx == 0)
port->port.private_data =
xr17v35x_register_gpio(pcidev);
return 0;
}
static void pci_xr17v35x_exit(struct pci_dev *pcidev)
{
struct exar8250 *priv = pci_get_drvdata(pcidev);
struct uart_8250_port *port = serial8250_get_port(priv->line[0]);
struct platform_device *pdev = port->port.private_data;
platform_device_unregister(pdev);
port->port.private_data = NULL;
}
static int
exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
{
unsigned int nr_ports, i, bar = 0, maxnr;
struct exar8250_board *board;
struct uart_8250_port uart;
struct exar8250 *priv;
int rc;
board = (struct exar8250_board *)ent->driver_data;
if (!board)
return -EINVAL;
rc = pcim_enable_device(pcidev);
if (rc)
return rc;
maxnr = pci_resource_len(pcidev, bar) >> (board->reg_shift + 3);
nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f;
priv = devm_kzalloc(&pcidev->dev, sizeof(*priv) +
sizeof(unsigned int) * nr_ports,
GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->board = board;
memset(&uart, 0, sizeof(uart));
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ
| UPF_EXAR_EFR;
uart.port.irq = pcidev->irq;
uart.port.dev = &pcidev->dev;
for (i = 0; i < nr_ports && i < maxnr; i++) {
rc = board->setup(priv, pcidev, &uart, i);
if (rc) {
dev_err(&pcidev->dev, "Failed to setup port %u\n", i);
break;
}
dev_dbg(&pcidev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
uart.port.iobase, uart.port.irq, uart.port.iotype);
priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
dev_err(&pcidev->dev,
"Couldn't register serial port %lx, irq %d, type %d, error %d\n",
uart.port.iobase, uart.port.irq,
uart.port.iotype, priv->line[i]);
break;
}
}
priv->nr = i;
pci_set_drvdata(pcidev, priv);
return 0;
}
static void exar_pci_remove(struct pci_dev *pcidev)
{
struct exar8250 *priv = pci_get_drvdata(pcidev);
unsigned int i;
for (i = 0; i < priv->nr; i++)
serial8250_unregister_port(priv->line[i]);
if (priv->board->exit)
priv->board->exit(pcidev);
}
static int __maybe_unused exar_suspend(struct device *dev)
{
struct pci_dev *pcidev = to_pci_dev(dev);
struct exar8250 *priv = pci_get_drvdata(pcidev);
unsigned int i;
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_suspend_port(priv->line[i]);
/* Ensure that every init quirk is properly torn down */
if (priv->board->exit)
priv->board->exit(pcidev);
return 0;
}
static int __maybe_unused exar_resume(struct device *dev)
{
struct pci_dev *pcidev = to_pci_dev(dev);
struct exar8250 *priv = pci_get_drvdata(pcidev);
unsigned int i;
for (i = 0; i < priv->nr; i++)
if (priv->line[i] >= 0)
serial8250_resume_port(priv->line[i]);
return 0;
}
static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
static const struct exar8250_board pbn_connect = {
.setup = pci_connect_tech_setup,
};
static const struct exar8250_board pbn_exar_ibm_saturn = {
.num_ports = 1,
.setup = pci_xr17c154_setup,
};
static const struct exar8250_board pbn_exar_XR17C15x = {
.setup = pci_xr17c154_setup,
};
static const struct exar8250_board pbn_exar_XR17V35x = {
.setup = pci_xr17v35x_setup,
.exit = pci_xr17v35x_exit,
};
static const struct exar8250_board pbn_exar_XR17V4358 = {
.num_ports = 12,
.has_slave = true,
.setup = pci_xr17v35x_setup,
.exit = pci_xr17v35x_exit,
};
static const struct exar8250_board pbn_exar_XR17V8358 = {
.num_ports = 16,
.has_slave = true,
.setup = pci_xr17v35x_setup,
.exit = pci_xr17v35x_exit,
};
#define CONNECT_DEVICE(devid, sdevid, bd) { \
PCI_DEVICE_SUB( \
PCI_VENDOR_ID_EXAR, \
PCI_DEVICE_ID_EXAR_##devid, \
PCI_SUBVENDOR_ID_CONNECT_TECH, \
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_##sdevid), 0, 0, \
(kernel_ulong_t)&bd \
}
#define EXAR_DEVICE(vend, devid, bd) { \
PCI_VDEVICE(vend, PCI_DEVICE_ID_##devid), (kernel_ulong_t)&bd \
}
#define IBM_DEVICE(devid, sdevid, bd) { \
PCI_DEVICE_SUB( \
PCI_VENDOR_ID_EXAR, \
PCI_DEVICE_ID_EXAR_##devid, \
PCI_VENDOR_ID_IBM, \
PCI_SUBDEVICE_ID_IBM_##sdevid), 0, 0, \
(kernel_ulong_t)&bd \
}
static struct pci_device_id exar_pci_tbl[] = {
CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect),
CONNECT_DEVICE(XR17C152, UART_1_1, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_2_2, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_4_4, pbn_connect),
CONNECT_DEVICE(XR17C152, UART_2, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_8, pbn_connect),
CONNECT_DEVICE(XR17C152, UART_2_485, pbn_connect),
CONNECT_DEVICE(XR17C154, UART_4_485, pbn_connect),
CONNECT_DEVICE(XR17C158, UART_8_485, pbn_connect),
IBM_DEVICE(XR17C152, SATURN_SERIAL_ONE_PORT, pbn_exar_ibm_saturn),
/* Exar Corp. XR17C15[248] Dual/Quad/Octal UART */
EXAR_DEVICE(EXAR, EXAR_XR17C152, pbn_exar_XR17C15x),
EXAR_DEVICE(EXAR, EXAR_XR17C154, pbn_exar_XR17C15x),
EXAR_DEVICE(EXAR, EXAR_XR17C158, pbn_exar_XR17C15x),
/* Exar Corp. XR17V[48]35[248] Dual/Quad/Octal/Hexa PCIe UARTs */
EXAR_DEVICE(EXAR, EXAR_XR17V352, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, EXAR_XR17V354, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, EXAR_XR17V358, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, EXAR_XR17V4358, pbn_exar_XR17V4358),
EXAR_DEVICE(EXAR, EXAR_XR17V8358, pbn_exar_XR17V8358),
EXAR_DEVICE(COMMTECH, COMMTECH_4222PCIE, pbn_exar_XR17V35x),
EXAR_DEVICE(COMMTECH, COMMTECH_4224PCIE, pbn_exar_XR17V35x),
EXAR_DEVICE(COMMTECH, COMMTECH_4228PCIE, pbn_exar_XR17V35x),
{ 0, }
};
MODULE_DEVICE_TABLE(pci, exar_pci_tbl);
static struct pci_driver exar_pci_driver = {
.name = "exar_serial",
.probe = exar_pci_probe,
.remove = exar_pci_remove,
.driver = {
.pm = &exar_pci_pm,
},
.id_table = exar_pci_tbl,
};
module_pci_driver(exar_pci_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Exar Serial Dricer");
MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");

View File

@ -127,6 +127,10 @@ config SERIAL_8250_PCI
Note that serial ports on NetMos 9835 Multi-I/O cards are handled
by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL.
config SERIAL_8250_EXAR
tristate "8250/16550 PCI device support"
depends on SERIAL_8250_PCI
config SERIAL_8250_HP300
tristate
depends on SERIAL_8250 && HP300

View File

@ -10,6 +10,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o