usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY

This adds driver for the USB Type-C PHY on Intel WhiskeyCove
PMIC which is available on some of the Intel Broxton SoC
based platforms.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Heikki Krogerus 2017-03-21 13:56:48 +02:00 committed by Greg Kroah-Hartman
parent fab9288428
commit d2061f9cc3
3 changed files with 393 additions and 0 deletions

View File

@ -4,4 +4,19 @@ menu "USB Power Delivery and Type-C drivers"
config TYPEC
tristate
config TYPEC_WCOVE
tristate "Intel WhiskeyCove PMIC USB Type-C PHY driver"
depends on ACPI
depends on INTEL_SOC_PMIC
depends on INTEL_PMC_IPC
depends on BXT_WC_PMIC_OPREGION
select TYPEC
help
This driver adds support for USB Type-C detection on Intel Broxton
platforms that have Intel Whiskey Cove PMIC. The driver can detect the
role and cable orientation.
To compile this driver as module, choose M here: the module will be
called typec_wcove
endmenu

View File

@ -1 +1,2 @@
obj-$(CONFIG_TYPEC) += typec.o
obj-$(CONFIG_TYPEC_WCOVE) += typec_wcove.o

View File

@ -0,0 +1,377 @@
/**
* typec_wcove.c - WhiskeyCove PMIC USB Type-C PHY driver
*
* Copyright (C) 2017 Intel Corporation
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/usb/typec.h>
#include <linux/platform_device.h>
#include <linux/mfd/intel_soc_pmic.h>
/* Register offsets */
#define WCOVE_CHGRIRQ0 0x4e09
#define WCOVE_PHYCTRL 0x5e07
#define USBC_CONTROL1 0x7001
#define USBC_CONTROL2 0x7002
#define USBC_CONTROL3 0x7003
#define USBC_CC1_CTRL 0x7004
#define USBC_CC2_CTRL 0x7005
#define USBC_STATUS1 0x7007
#define USBC_STATUS2 0x7008
#define USBC_STATUS3 0x7009
#define USBC_IRQ1 0x7015
#define USBC_IRQ2 0x7016
#define USBC_IRQMASK1 0x7017
#define USBC_IRQMASK2 0x7018
/* Register bits */
#define USBC_CONTROL1_MODE_DRP(r) (((r) & ~0x7) | 4)
#define USBC_CONTROL2_UNATT_SNK BIT(0)
#define USBC_CONTROL2_UNATT_SRC BIT(1)
#define USBC_CONTROL2_DIS_ST BIT(2)
#define USBC_CONTROL3_PD_DIS BIT(1)
#define USBC_CC_CTRL_VCONN_EN BIT(1)
#define USBC_STATUS1_DET_ONGOING BIT(6)
#define USBC_STATUS1_RSLT(r) ((r) & 0xf)
#define USBC_RSLT_NOTHING 0
#define USBC_RSLT_SRC_DEFAULT 1
#define USBC_RSLT_SRC_1_5A 2
#define USBC_RSLT_SRC_3_0A 3
#define USBC_RSLT_SNK 4
#define USBC_RSLT_DEBUG_ACC 5
#define USBC_RSLT_AUDIO_ACC 6
#define USBC_RSLT_UNDEF 15
#define USBC_STATUS1_ORIENT(r) (((r) >> 4) & 0x3)
#define USBC_ORIENT_NORMAL 1
#define USBC_ORIENT_REVERSE 2
#define USBC_STATUS2_VBUS_REQ BIT(5)
#define USBC_IRQ1_ADCDONE1 BIT(2)
#define USBC_IRQ1_OVERTEMP BIT(1)
#define USBC_IRQ1_SHORT BIT(0)
#define USBC_IRQ2_CC_CHANGE BIT(7)
#define USBC_IRQ2_RX_PD BIT(6)
#define USBC_IRQ2_RX_HR BIT(5)
#define USBC_IRQ2_RX_CR BIT(4)
#define USBC_IRQ2_TX_SUCCESS BIT(3)
#define USBC_IRQ2_TX_FAIL BIT(2)
#define USBC_IRQMASK1_ALL (USBC_IRQ1_ADCDONE1 | USBC_IRQ1_OVERTEMP | \
USBC_IRQ1_SHORT)
#define USBC_IRQMASK2_ALL (USBC_IRQ2_CC_CHANGE | USBC_IRQ2_RX_PD | \
USBC_IRQ2_RX_HR | USBC_IRQ2_RX_CR | \
USBC_IRQ2_TX_SUCCESS | USBC_IRQ2_TX_FAIL)
struct wcove_typec {
struct mutex lock; /* device lock */
struct device *dev;
struct regmap *regmap;
struct typec_port *port;
struct typec_capability cap;
struct typec_partner *partner;
};
enum wcove_typec_func {
WCOVE_FUNC_DRIVE_VBUS = 1,
WCOVE_FUNC_ORIENTATION,
WCOVE_FUNC_ROLE,
WCOVE_FUNC_DRIVE_VCONN,
};
enum wcove_typec_orientation {
WCOVE_ORIENTATION_NORMAL,
WCOVE_ORIENTATION_REVERSE,
};
enum wcove_typec_role {
WCOVE_ROLE_HOST,
WCOVE_ROLE_DEVICE,
};
static uuid_le uuid = UUID_LE(0x482383f0, 0x2876, 0x4e49,
0x86, 0x85, 0xdb, 0x66, 0x21, 0x1a, 0xf0, 0x37);
static int wcove_typec_func(struct wcove_typec *wcove,
enum wcove_typec_func func, int param)
{
union acpi_object *obj;
union acpi_object tmp;
union acpi_object argv4 = ACPI_INIT_DSM_ARGV4(1, &tmp);
tmp.type = ACPI_TYPE_INTEGER;
tmp.integer.value = param;
obj = acpi_evaluate_dsm(ACPI_HANDLE(wcove->dev), uuid.b, 1, func,
&argv4);
if (!obj) {
dev_err(wcove->dev, "%s: failed to evaluate _DSM\n", __func__);
return -EIO;
}
ACPI_FREE(obj);
return 0;
}
static irqreturn_t wcove_typec_irq(int irq, void *data)
{
enum typec_role role = TYPEC_SINK;
struct typec_partner_desc partner;
struct wcove_typec *wcove = data;
unsigned int cc1_ctrl;
unsigned int cc2_ctrl;
unsigned int cc_irq1;
unsigned int cc_irq2;
unsigned int status1;
unsigned int status2;
int ret;
mutex_lock(&wcove->lock);
ret = regmap_read(wcove->regmap, USBC_IRQ1, &cc_irq1);
if (ret)
goto err;
ret = regmap_read(wcove->regmap, USBC_IRQ2, &cc_irq2);
if (ret)
goto err;
ret = regmap_read(wcove->regmap, USBC_STATUS1, &status1);
if (ret)
goto err;
ret = regmap_read(wcove->regmap, USBC_STATUS2, &status2);
if (ret)
goto err;
ret = regmap_read(wcove->regmap, USBC_CC1_CTRL, &cc1_ctrl);
if (ret)
goto err;
ret = regmap_read(wcove->regmap, USBC_CC2_CTRL, &cc2_ctrl);
if (ret)
goto err;
if (cc_irq1) {
if (cc_irq1 & USBC_IRQ1_OVERTEMP)
dev_err(wcove->dev, "VCONN Switch Over Temperature!\n");
if (cc_irq1 & USBC_IRQ1_SHORT)
dev_err(wcove->dev, "VCONN Switch Short Circuit!\n");
ret = regmap_write(wcove->regmap, USBC_IRQ1, cc_irq1);
if (ret)
goto err;
}
if (cc_irq2) {
ret = regmap_write(wcove->regmap, USBC_IRQ2, cc_irq2);
if (ret)
goto err;
/*
* Ignoring any PD communication interrupts until the PD support
* is available
*/
if (cc_irq2 & ~USBC_IRQ2_CC_CHANGE) {
dev_WARN(wcove->dev, "USB PD handling missing\n");
goto err;
}
}
if (status1 & USBC_STATUS1_DET_ONGOING)
goto out;
if (USBC_STATUS1_RSLT(status1) == USBC_RSLT_NOTHING) {
if (wcove->partner) {
typec_unregister_partner(wcove->partner);
wcove->partner = NULL;
}
wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
WCOVE_ORIENTATION_NORMAL);
/* This makes sure the device controller is disconnected */
wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
/* Port to default role */
typec_set_data_role(wcove->port, TYPEC_DEVICE);
typec_set_pwr_role(wcove->port, TYPEC_SINK);
typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
goto out;
}
if (wcove->partner)
goto out;
switch (USBC_STATUS1_ORIENT(status1)) {
case USBC_ORIENT_NORMAL:
wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
WCOVE_ORIENTATION_NORMAL);
break;
case USBC_ORIENT_REVERSE:
wcove_typec_func(wcove, WCOVE_FUNC_ORIENTATION,
WCOVE_ORIENTATION_REVERSE);
default:
break;
}
memset(&partner, 0, sizeof(partner));
switch (USBC_STATUS1_RSLT(status1)) {
case USBC_RSLT_SRC_DEFAULT:
typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_USB);
break;
case USBC_RSLT_SRC_1_5A:
typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_1_5A);
break;
case USBC_RSLT_SRC_3_0A:
typec_set_pwr_opmode(wcove->port, TYPEC_PWR_MODE_3_0A);
break;
case USBC_RSLT_SNK:
role = TYPEC_SOURCE;
break;
case USBC_RSLT_DEBUG_ACC:
partner.accessory = TYPEC_ACCESSORY_DEBUG;
break;
case USBC_RSLT_AUDIO_ACC:
partner.accessory = TYPEC_ACCESSORY_AUDIO;
break;
default:
dev_WARN(wcove->dev, "%s Undefined result\n", __func__);
goto err;
}
if (role == TYPEC_SINK) {
wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_DEVICE);
typec_set_data_role(wcove->port, TYPEC_DEVICE);
typec_set_pwr_role(wcove->port, TYPEC_SINK);
} else {
wcove_typec_func(wcove, WCOVE_FUNC_ROLE, WCOVE_ROLE_HOST);
typec_set_pwr_role(wcove->port, TYPEC_SOURCE);
typec_set_data_role(wcove->port, TYPEC_HOST);
}
wcove->partner = typec_register_partner(wcove->port, &partner);
if (!wcove->partner)
dev_err(wcove->dev, "failed register partner\n");
out:
/* If either CC pins is requesting VCONN, we turn it on */
if ((cc1_ctrl & USBC_CC_CTRL_VCONN_EN) ||
(cc2_ctrl & USBC_CC_CTRL_VCONN_EN))
wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, true);
else
wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VCONN, false);
/* Relying on the FSM to know when we need to drive VBUS. */
wcove_typec_func(wcove, WCOVE_FUNC_DRIVE_VBUS,
!!(status2 & USBC_STATUS2_VBUS_REQ));
err:
/* REVISIT: Clear WhiskeyCove CHGR Type-C interrupt */
regmap_write(wcove->regmap, WCOVE_CHGRIRQ0, BIT(5));
mutex_unlock(&wcove->lock);
return IRQ_HANDLED;
}
static int wcove_typec_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
struct wcove_typec *wcove;
unsigned int val;
int ret;
wcove = devm_kzalloc(&pdev->dev, sizeof(*wcove), GFP_KERNEL);
if (!wcove)
return -ENOMEM;
mutex_init(&wcove->lock);
wcove->dev = &pdev->dev;
wcove->regmap = pmic->regmap;
ret = regmap_irq_get_virq(pmic->irq_chip_data_level2,
platform_get_irq(pdev, 0));
if (ret < 0)
return ret;
ret = devm_request_threaded_irq(&pdev->dev, ret, NULL,
wcove_typec_irq, IRQF_ONESHOT,
"wcove_typec", wcove);
if (ret)
return ret;
if (!acpi_check_dsm(ACPI_HANDLE(&pdev->dev), uuid.b, 0, 0x1f)) {
dev_err(&pdev->dev, "Missing _DSM functions\n");
return -ENODEV;
}
wcove->cap.type = TYPEC_PORT_DRP;
wcove->cap.revision = USB_TYPEC_REV_1_1;
wcove->cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
/* Make sure the PD PHY is disabled until USB PD is available */
regmap_read(wcove->regmap, USBC_CONTROL3, &val);
regmap_write(wcove->regmap, USBC_CONTROL3, val | USBC_CONTROL3_PD_DIS);
/* DRP mode without accessory support */
regmap_read(wcove->regmap, USBC_CONTROL1, &val);
regmap_write(wcove->regmap, USBC_CONTROL1, USBC_CONTROL1_MODE_DRP(val));
wcove->port = typec_register_port(&pdev->dev, &wcove->cap);
if (!wcove->port)
return -ENODEV;
/* Unmask everything */
regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
regmap_write(wcove->regmap, USBC_IRQMASK1, val & ~USBC_IRQMASK1_ALL);
regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
regmap_write(wcove->regmap, USBC_IRQMASK2, val & ~USBC_IRQMASK2_ALL);
platform_set_drvdata(pdev, wcove);
return 0;
}
static int wcove_typec_remove(struct platform_device *pdev)
{
struct wcove_typec *wcove = platform_get_drvdata(pdev);
unsigned int val;
/* Mask everything */
regmap_read(wcove->regmap, USBC_IRQMASK1, &val);
regmap_write(wcove->regmap, USBC_IRQMASK1, val | USBC_IRQMASK1_ALL);
regmap_read(wcove->regmap, USBC_IRQMASK2, &val);
regmap_write(wcove->regmap, USBC_IRQMASK2, val | USBC_IRQMASK2_ALL);
typec_unregister_partner(wcove->partner);
typec_unregister_port(wcove->port);
return 0;
}
static struct platform_driver wcove_typec_driver = {
.driver = {
.name = "bxt_wcove_usbc",
},
.probe = wcove_typec_probe,
.remove = wcove_typec_remove,
};
module_platform_driver(wcove_typec_driver);
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("WhiskeyCove PMIC USB Type-C PHY driver");
MODULE_ALIAS("platform:bxt_wcove_usbc");