usb: dwc2: Update parameter types

Update the param types to appropriately sized ints and bools.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This commit is contained in:
John Youn 2017-01-23 14:55:58 -08:00 committed by Felipe Balbi
parent f9f93cbb3c
commit d21bcc3f03
1 changed files with 26 additions and 26 deletions

View File

@ -452,50 +452,50 @@ enum dwc2_ep0_state {
* default described above.
*/
struct dwc2_core_params {
int otg_cap;
u8 otg_cap;
#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0
#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1
#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
int dma_desc_enable;
int dma_desc_fs_enable;
int speed;
bool dma_desc_enable;
bool dma_desc_fs_enable;
u8 speed;
#define DWC2_SPEED_PARAM_HIGH 0
#define DWC2_SPEED_PARAM_FULL 1
#define DWC2_SPEED_PARAM_LOW 2
int enable_dynamic_fifo;
int en_multiple_tx_fifo;
int host_rx_fifo_size;
int host_nperio_tx_fifo_size;
int host_perio_tx_fifo_size;
int max_transfer_size;
int max_packet_count;
int host_channels;
int phy_type;
bool enable_dynamic_fifo;
bool en_multiple_tx_fifo;
u16 host_rx_fifo_size;
u16 host_nperio_tx_fifo_size;
u16 host_perio_tx_fifo_size;
u32 max_transfer_size;
u16 max_packet_count;
u8 host_channels;
u8 phy_type;
#define DWC2_PHY_TYPE_PARAM_FS 0
#define DWC2_PHY_TYPE_PARAM_UTMI 1
#define DWC2_PHY_TYPE_PARAM_ULPI 2
int phy_utmi_width;
int phy_ulpi_ddr;
int phy_ulpi_ext_vbus;
u8 phy_utmi_width;
bool phy_ulpi_ddr;
bool phy_ulpi_ext_vbus;
#define DWC2_PHY_ULPI_INTERNAL_VBUS 0
#define DWC2_PHY_ULPI_EXTERNAL_VBUS 1
int i2c_enable;
int ulpi_fs_ls;
int host_support_fs_ls_low_power;
int host_ls_low_power_phy_clk;
bool i2c_enable;
bool ulpi_fs_ls;
bool host_support_fs_ls_low_power;
bool host_ls_low_power_phy_clk;
#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
int ts_dline;
int reload_ctl;
int ahbcfg;
int uframe_sched;
int external_id_pin_ctl;
int hibernation;
bool ts_dline;
bool reload_ctl;
u32 ahbcfg;
bool uframe_sched;
bool external_id_pin_ctl;
bool hibernation;
/*
* The following parameters are *only* set via device