[PATCH] sky2: spelling fixes
Cosmetic cleanup's: mostly spelling fixes etc. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
shemminger@osdl.org
Jeff Garzik
parent
b2f5ad4fec
commit
d571b694df
|
|
@ -214,7 +214,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
|
|||
pci_read_config_dword(hw->pdev, PCI_DEV_REG1, ®1);
|
||||
reg1 &= ~(PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
|
||||
|
||||
/* looks like this xl is back asswards .. */
|
||||
/* looks like this XL is back asswards .. */
|
||||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1) {
|
||||
reg1 |= PCI_Y2_PHY1_COMA;
|
||||
if (hw->ports > 1)
|
||||
|
|
@ -461,7 +461,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
|
|||
if (ledover)
|
||||
gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
|
||||
|
||||
/* Enable phy interrupt on autonegotiation complete (or link up) */
|
||||
/* Enable phy interrupt on auto-negotiation complete (or link up) */
|
||||
if (sky2->autoneg == AUTONEG_ENABLE)
|
||||
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
|
||||
else
|
||||
|
|
@ -578,10 +578,10 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
|
|||
sky2_write16(hw, SK_REG(port, RX_GMF_CTRL_T),
|
||||
GMF_RX_CTRL_DEF);
|
||||
|
||||
/* Flush Rx MAC FIFO on any flowcontrol or error */
|
||||
/* Flush Rx MAC FIFO on any flow control or error */
|
||||
reg = GMR_FS_ANY_ERR;
|
||||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev <= 1)
|
||||
reg = 0; /* WA Dev #4115 */
|
||||
reg = 0; /* WA dev #4.115 */
|
||||
|
||||
sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), reg);
|
||||
/* Set threshold to 0xa (64 bytes)
|
||||
|
|
@ -662,7 +662,7 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
|
|||
}
|
||||
|
||||
/*
|
||||
* This is a workaround code taken from syskonnect sk98lin driver
|
||||
* This is a workaround code taken from SysKonnect sk98lin driver
|
||||
* to deal with chip bug on Yukon EC rev 0 in the wraparound case.
|
||||
*/
|
||||
static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q,
|
||||
|
|
@ -785,7 +785,7 @@ stopped:
|
|||
sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
|
||||
}
|
||||
|
||||
/* Cleanout receive buffer area, assumes receiver hardware stopped */
|
||||
/* Clean out receive buffer area, assumes receiver hardware stopped */
|
||||
static void sky2_rx_clean(struct sky2_port *sky2)
|
||||
{
|
||||
unsigned i;
|
||||
|
|
@ -1174,7 +1174,7 @@ out_unlock:
|
|||
* Free ring elements from starting at tx_cons until "done"
|
||||
*
|
||||
* NB: the hardware will tell us about partial completion of multi-part
|
||||
* buffers; these are defered until completion.
|
||||
* buffers; these are deferred until completion.
|
||||
*/
|
||||
static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
|
||||
{
|
||||
|
|
@ -1182,7 +1182,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
|
|||
unsigned i;
|
||||
|
||||
if (unlikely(netif_msg_tx_done(sky2)))
|
||||
printk(KERN_DEBUG "%s: tx done, upto %u\n",
|
||||
printk(KERN_DEBUG "%s: tx done, up to %u\n",
|
||||
dev->name, done);
|
||||
|
||||
spin_lock(&sky2->tx_lock);
|
||||
|
|
@ -1282,7 +1282,7 @@ static int sky2_down(struct net_device *dev)
|
|||
sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
|
||||
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
|
||||
|
||||
/* turn off led's */
|
||||
/* turn off LED's */
|
||||
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
|
||||
|
||||
sky2_tx_clean(sky2);
|
||||
|
|
@ -1364,7 +1364,7 @@ static void sky2_link_up(struct sky2_port *sky2)
|
|||
|
||||
if (netif_msg_link(sky2))
|
||||
printk(KERN_INFO PFX
|
||||
"%s: Link is up at %d Mbps, %s duplex, flowcontrol %s\n",
|
||||
"%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
|
||||
sky2->netdev->name, sky2->speed,
|
||||
sky2->duplex == DUPLEX_FULL ? "full" : "half",
|
||||
(sky2->tx_pause && sky2->rx_pause) ? "both" :
|
||||
|
|
@ -1451,7 +1451,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
|
|||
}
|
||||
|
||||
/*
|
||||
* Interrrupt from PHY are handled in tasklet (soft irq)
|
||||
* Interrupt from PHY are handled in tasklet (soft irq)
|
||||
* because accessing phy registers requires spin wait which might
|
||||
* cause excess interrupt latency.
|
||||
*/
|
||||
|
|
@ -1556,7 +1556,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
|
|||
/*
|
||||
* Receive one packet.
|
||||
* For small packets or errors, just reuse existing skb.
|
||||
* For larger pakects, get new buffer.
|
||||
* For larger packets, get new buffer.
|
||||
*/
|
||||
static struct sk_buff *sky2_receive(struct sky2_port *sky2,
|
||||
u16 length, u32 status)
|
||||
|
|
@ -1818,7 +1818,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
|
|||
}
|
||||
|
||||
if (status & Y2_IS_PCI_EXP) {
|
||||
/* PCI-Express uncorrectable Error occured */
|
||||
/* PCI-Express uncorrectable Error occurred */
|
||||
u32 pex_err;
|
||||
|
||||
pci_read_config_dword(hw->pdev, PEX_UNC_ERR_STAT, &pex_err);
|
||||
|
|
@ -2113,7 +2113,7 @@ static int sky2_reset(struct sky2_hw *hw)
|
|||
if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0)
|
||||
sky2_write8(hw, STAT_FIFO_ISR_WM, 0x10);
|
||||
|
||||
else /* WA 4109 */
|
||||
else /* WA dev 4.109 */
|
||||
sky2_write8(hw, STAT_FIFO_ISR_WM, 0x04);
|
||||
|
||||
sky2_write32(hw, STAT_ISR_TIMER_INI, 0x0190);
|
||||
|
|
@ -2420,7 +2420,7 @@ static void sky2_set_multicast(struct net_device *dev)
|
|||
reg = gma_read16(hw, port, GM_RX_CTRL);
|
||||
reg |= GM_RXCR_UCF_ENA;
|
||||
|
||||
if (dev->flags & IFF_PROMISC) /* promiscious */
|
||||
if (dev->flags & IFF_PROMISC) /* promiscuous */
|
||||
reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
|
||||
else if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 16) /* all multicast */
|
||||
memset(filter, 0xff, sizeof(filter));
|
||||
|
|
@ -2833,7 +2833,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
|
|||
}
|
||||
}
|
||||
#ifdef __BIG_ENDIAN
|
||||
/* byte swap decriptors in hardware */
|
||||
/* byte swap descriptors in hardware */
|
||||
{
|
||||
u32 reg;
|
||||
|
||||
|
|
|
|||
|
|
@ -356,11 +356,11 @@ enum {
|
|||
|
||||
/* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */
|
||||
enum {
|
||||
Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactiv (0 = activ) */
|
||||
Y2_STATUS_LNK2_INAC = 1<<7, /* Status Link 2 inactive (0 = active) */
|
||||
Y2_CLK_GAT_LNK2_DIS = 1<<6, /* Disable clock gating Link 2 */
|
||||
Y2_COR_CLK_LNK2_DIS = 1<<5, /* Disable Core clock Link 2 */
|
||||
Y2_PCI_CLK_LNK2_DIS = 1<<4, /* Disable PCI clock Link 2 */
|
||||
Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactiv (0 = activ) */
|
||||
Y2_STATUS_LNK1_INAC = 1<<3, /* Status Link 1 inactive (0 = active) */
|
||||
Y2_CLK_GAT_LNK1_DIS = 1<<2, /* Disable clock gating Link 1 */
|
||||
Y2_COR_CLK_LNK1_DIS = 1<<1, /* Disable Core clock Link 1 */
|
||||
Y2_PCI_CLK_LNK1_DIS = 1<<0, /* Disable PCI clock Link 1 */
|
||||
|
|
@ -410,7 +410,7 @@ enum {
|
|||
#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */
|
||||
/* RAM Interface Registers */
|
||||
|
||||
/* B3_RI_CTRL 16 bit RAM Iface Control Register */
|
||||
/* B3_RI_CTRL 16 bit RAM Interface Control Register */
|
||||
enum {
|
||||
RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */
|
||||
RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/
|
||||
|
|
@ -613,7 +613,7 @@ enum {
|
|||
BMU_ENA_RX_CHKSUM = 1<<13, /* Enable Rx TCP/IP Checksum Check */
|
||||
BMU_DIS_RX_CHKSUM = 1<<12, /* Disable Rx TCP/IP Checksum Check */
|
||||
BMU_CLR_IRQ_PAR = 1<<11, /* Clear IRQ on Parity errors (Rx) */
|
||||
BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segmen. error (Tx) */
|
||||
BMU_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment. error (Tx) */
|
||||
BMU_CLR_IRQ_CHK = 1<<10, /* Clear IRQ Check */
|
||||
BMU_STOP = 1<<9, /* Stop Rx/Tx Queue */
|
||||
BMU_START = 1<<8, /* Start Rx/Tx Queue */
|
||||
|
|
@ -636,7 +636,7 @@ enum {
|
|||
enum {
|
||||
BMU_TX_IPIDINCR_ON = 1<<13, /* Enable IP ID Increment */
|
||||
BMU_TX_IPIDINCR_OFF = 1<<12, /* Disable IP ID Increment */
|
||||
BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segm. length mism. */
|
||||
BMU_TX_CLR_IRQ_TCP = 1<<11, /* Clear IRQ on TCP segment length mismatch */
|
||||
};
|
||||
|
||||
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
|
||||
|
|
|
|||
Loading…
Reference in New Issue