From eb07d964b4491d1bb5864cd3d7e7633ccdda9a53 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Date: Mon, 14 Nov 2005 05:38:31 -0200
Subject: [PATCH 01/12] [PATCH] ppc32 8xx: update_mmu_cache() needs
 unconditional tlbie

Currently 8xx fails to boot due to endless pagefaults.

Seems the bug is exposed by the change which avoids flushing the
TLB when not necessary (in case the pte has not changed), introduced
recently:

__handle_mm_fault():

        entry = pte_mkyoung(entry);
        if (!pte_same(old_entry, entry)) {
                ptep_set_access_flags(vma, address, pte, entry, write_access);
                update_mmu_cache(vma, address, entry);
                lazy_mmu_prot_update(entry);
        } else {
                /*
                 * This is needed only for protection faults but the arch code
                 * is not yet telling us if this is a protection fault or not.
                 * This still avoids useless tlb flushes for .text page faults
                 * with threads.
                 */
                if (write_access)
                        flush_tlb_page(vma, address);
        }

The "update_mmu_cache()" call was unconditional before, which caused the TLB
to be flushed by:

        if (pfn_valid(pfn)) {
                struct page *page = pfn_to_page(pfn);
                if (!PageReserved(page)
                    && !test_bit(PG_arch_1, &page->flags)) {
                        if (vma->vm_mm == current->active_mm) {
#ifdef CONFIG_8xx
                        /* On 8xx, cache control instructions (particularly
                         * "dcbst" from flush_dcache_icache) fault as write
                         * operation if there is an unpopulated TLB entry
                         * for the address in question. To workaround that,
                         * we invalidate the TLB here, thus avoiding dcbst
                         * misbehaviour.
                         */
                                _tlbie(address);
#endif
                                __flush_dcache_icache((void *) address);
                        } else
                                flush_dcache_icache_page(page);
                        set_bit(PG_arch_1, &page->flags);
                }

Which worked to due to pure luck: PG_arch_1 was always unset before, but
now it isnt.

The root of the problem are the changes against the 8xx TLB handlers introduced
during v2.6. What happens is the TLBMiss handlers load the zeroed pte into
the TLB, causing the TLBError handler to be invoked (thats two TLB faults per
pagefault), which then jumps to the generic MM code to setup the pte.

The bug is that the zeroed TLB is not invalidated (the same reason
for the "dcbst" misbehaviour), resulting in infinite TLBError faults.

The "two exception" approach requires a TLB flush (to nuke the zeroed TLB)
at each PTE update for correct behaviour:

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/ppc/mm/init.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 99b48abd3296..45f0782059f1 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -597,21 +597,20 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 
 	if (pfn_valid(pfn)) {
 		struct page *page = pfn_to_page(pfn);
+#ifdef CONFIG_8xx
+		/* On 8xx, the TLB handlers work in 2 stages:
+	 	 * First, a zeroed entry is loaded by TLBMiss handler,
+		 * which causes the TLBError handler to be triggered.
+		 * That means the zeroed TLB has to be invalidated
+		 * whenever a page miss occurs.
+		 */
+		_tlbie(address);
+#endif
 		if (!PageReserved(page)
 		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm) {
-#ifdef CONFIG_8xx
-			/* On 8xx, cache control instructions (particularly 
-		 	 * "dcbst" from flush_dcache_icache) fault as write 
-			 * operation if there is an unpopulated TLB entry 
-			 * for the address in question. To workaround that, 
-			 * we invalidate the TLB here, thus avoiding dcbst 
-			 * misbehaviour.
-			 */
-				_tlbie(address);
-#endif
+			if (vma->vm_mm == current->active_mm)
 				__flush_dcache_icache((void *) address);
-			} else
+			else
 				flush_dcache_icache_page(page);
 			set_bit(PG_arch_1, &page->flags);
 		}

From 5444a5e9e872f599ec12534bd1bf9bc79a1c72ca Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 15 Nov 2005 14:40:25 +1100
Subject: [PATCH 02/12] [PATCH] powerpc: update defconfigs

My patch moving ppc64 RTC to genrtc was supposed to update all
defconfigs, but for some reason, the patch actually posted only had the
pseries one... ouch. This patch properly updates all defconfigs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/configs/cell_defconfig    | 175 ++++++++++++++++---------
 arch/powerpc/configs/g5_defconfig      |  53 +++++---
 arch/powerpc/configs/iseries_defconfig | 159 +++++++++++++++-------
 arch/powerpc/configs/maple_defconfig   | 155 ++++++++++++++--------
 arch/powerpc/configs/pseries_defconfig |   4 +-
 5 files changed, 361 insertions(+), 185 deletions(-)

diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index 67ffecbc05cb..4b433411b9e3 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:29:10 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:36:20 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 
 #
 # Code maturity level options
@@ -66,31 +81,69 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
-CONFIG_PPC_BPA=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+CONFIG_PPC_CELL=y
 CONFIG_PPC_OF=y
-CONFIG_BPA_IIC=y
-CONFIG_ALTIVEC=y
-CONFIG_KEXEC=y
 # CONFIG_U3_DART is not set
-# CONFIG_BOOTX_TEXT is not set
-# CONFIG_POWER4_ONLY is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+CONFIG_RTAS_FLASH=y
+CONFIG_MMIO_NVRAM=y
+CONFIG_CELL_IIC=y
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -98,30 +151,21 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_PPC_RTAS=y
-CONFIG_RTAS_PROC=y
-CONFIG_RTAS_FLASH=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus Options
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LEGACY_PROC=y
@@ -136,6 +180,7 @@ CONFIG_PCI_LEGACY_PROC=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -183,6 +228,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -284,6 +333,10 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -345,14 +398,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -442,6 +487,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -495,7 +541,6 @@ CONFIG_SKGE=m
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-# CONFIG_SPIDER_NET is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
@@ -625,7 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WATCHDOG_RTAS=y
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -633,6 +678,8 @@ CONFIG_WATCHDOG_RTAS=y
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -649,6 +696,7 @@ CONFIG_WATCHDOG_RTAS=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -699,6 +747,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -756,6 +805,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -943,9 +996,24 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -962,13 +1030,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUGGER=y
 # CONFIG_XMON is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
 
 #
 # Security options
@@ -1008,17 +1077,3 @@ CONFIG_CRYPTO_DEFLATE=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index e76854f8c121..e7c23e3902b8 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Mon Nov  7 13:37:59 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:39:20 2005
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -82,6 +82,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Platform support
 #
@@ -137,6 +154,7 @@ CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -144,7 +162,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -215,6 +233,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -382,19 +404,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -656,7 +665,6 @@ CONFIG_SUNGEM=y
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_FEC_8XX is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -710,6 +718,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -804,6 +813,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -917,7 +928,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -932,6 +942,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
 # CONFIG_FB_RIVA is not set
@@ -950,7 +961,6 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -959,6 +969,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -1474,10 +1485,11 @@ CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 
 #
-# Profiling support
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -1497,7 +1509,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_KPROBES is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 62e92c7e9e27..5d0866707a75 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,18 +1,33 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:30:56 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:38:09 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
 
 #
 # Code maturity level options
@@ -68,22 +83,60 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-CONFIG_PPC_ISERIES=y
 # CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC=y
-CONFIG_PPC64=y
+CONFIG_PPC_ISERIES=y
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
-# CONFIG_POWER4_ONLY is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_LPARCFG=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -91,26 +144,20 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_LPARCFG=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_PM is not set
 CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus Options
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LEGACY_PROC=y
@@ -125,6 +172,7 @@ CONFIG_PCI_LEGACY_PROC=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -166,6 +214,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
 
 #
@@ -265,6 +317,10 @@ CONFIG_LLC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -326,14 +382,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -377,6 +425,7 @@ CONFIG_SCSI_FC_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -454,6 +503,7 @@ CONFIG_DM_ZERO=m
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -561,6 +611,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -643,6 +694,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -660,6 +713,7 @@ CONFIG_MAX_RAW_DEVS=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -712,6 +766,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -917,10 +975,25 @@ CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+
+#
+# Instrumentation Support
 #
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -937,11 +1010,11 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
-# CONFIG_PPCDBG is not set
 CONFIG_IRQSTACKS=y
 
 #
@@ -982,17 +1055,3 @@ CONFIG_CRYPTO_TEST=m
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 7b480f3d1406..92e42613ef06 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,18 +1,32 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc4
-# Thu Oct 20 08:31:24 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 14:38:58 2005
 #
+CONFIG_PPC64=y
 CONFIG_64BIT=y
+CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
+
+#
+# Processor support
+#
+CONFIG_POWER4_ONLY=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
 
 #
 # Code maturity level options
@@ -67,32 +81,67 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-CONFIG_SYSVIPC_COMPAT=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # Platform support
 #
-# CONFIG_PPC_ISERIES is not set
 CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
-# CONFIG_PPC_BPA is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
-CONFIG_PPC=y
-CONFIG_PPC64=y
+# CONFIG_PPC_CELL is not set
 CONFIG_PPC_OF=y
-CONFIG_MPIC=y
-# CONFIG_ALTIVEC is not set
-CONFIG_KEXEC=y
 CONFIG_U3_DART=y
+CONFIG_MPIC=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_POWER4_ONLY=y
+# CONFIG_PPC_MPC106 is not set
+CONFIG_GENERIC_TBSYNC=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# Kernel options
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -100,27 +149,21 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_NUMA is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_SECCOMP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
-# Bus Options
+# Bus options
 #
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_LEGACY_PROC=y
@@ -135,6 +178,7 @@ CONFIG_PCI_LEGACY_PROC=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
+CONFIG_KERNEL_START=0xc000000000000000
 
 #
 # Networking
@@ -193,6 +237,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -254,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -351,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # Macintosh device drivers
 #
+# CONFIG_WINDFARM is not set
 
 #
 # Network device support
@@ -533,6 +574,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -549,6 +592,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -599,6 +643,7 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -681,12 +726,15 @@ CONFIG_USB_UHCI_HCD=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 
@@ -776,6 +824,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
@@ -985,9 +1034,19 @@ CONFIG_NLS_DEFAULT="utf-8"
 CONFIG_NLS_UTF8=y
 
 #
-# Profiling support
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+
+#
+# Instrumentation Support
 #
 # CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
 
 #
 # Kernel hacking
@@ -1004,14 +1063,15 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_KPROBES is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
-# CONFIG_PPCDBG is not set
 # CONFIG_IRQSTACKS is not set
+CONFIG_BOOTX_TEXT=y
 
 #
 # Security options
@@ -1051,12 +1111,3 @@ CONFIG_CRYPTO_DES=y
 #
 # Hardware crypto devices
 #
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 913962c1dae0..b4745c918a4a 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.15-rc1
-# Mon Nov 14 15:27:00 2005
+# Tue Nov 15 14:36:55 2005
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -144,7 +144,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_KEXEC=y
-# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_IRQ_ALL_CPUS=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m

From eb481899aa319cf5cbeccfd9deac907300698b57 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Tue, 15 Nov 2005 14:49:22 +1100
Subject: [PATCH 03/12] [PATCH] powerpc: Fixup debugging in lmb.c

Somewhere we lost the include of udbg.h in lmb.c. While we're there, add a DBG
macro like every other file has and use it in lmb_dump_all().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/lmb.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c
index 9b5aa6808eb8..9584608fd768 100644
--- a/arch/powerpc/mm/lmb.c
+++ b/arch/powerpc/mm/lmb.c
@@ -22,35 +22,38 @@
 #include "mmu_decl.h"		/* for __max_low_memory */
 #endif
 
-struct lmb lmb;
-
 #undef DEBUG
 
+#ifdef DEBUG
+#include <asm/udbg.h>
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+struct lmb lmb;
+
 void lmb_dump_all(void)
 {
 #ifdef DEBUG
 	unsigned long i;
 
-	udbg_printf("lmb_dump_all:\n");
-	udbg_printf("    memory.cnt		  = 0x%lx\n",
-		    lmb.memory.cnt);
-	udbg_printf("    memory.size		  = 0x%lx\n",
-		    lmb.memory.size);
+	DBG("lmb_dump_all:\n");
+	DBG("    memory.cnt		  = 0x%lx\n", lmb.memory.cnt);
+	DBG("    memory.size		  = 0x%lx\n", lmb.memory.size);
 	for (i=0; i < lmb.memory.cnt ;i++) {
-		udbg_printf("    memory.region[0x%x].base       = 0x%lx\n",
+		DBG("    memory.region[0x%x].base       = 0x%lx\n",
 			    i, lmb.memory.region[i].base);
-		udbg_printf("		      .size     = 0x%lx\n",
+		DBG("		      .size     = 0x%lx\n",
 			    lmb.memory.region[i].size);
 	}
 
-	udbg_printf("\n    reserved.cnt	  = 0x%lx\n",
-		    lmb.reserved.cnt);
-	udbg_printf("    reserved.size	  = 0x%lx\n",
-		    lmb.reserved.size);
+	DBG("\n    reserved.cnt	  = 0x%lx\n", lmb.reserved.cnt);
+	DBG("    reserved.size	  = 0x%lx\n", lmb.reserved.size);
 	for (i=0; i < lmb.reserved.cnt ;i++) {
-		udbg_printf("    reserved.region[0x%x].base       = 0x%lx\n",
+		DBG("    reserved.region[0x%x].base       = 0x%lx\n",
 			    i, lmb.reserved.region[i].base);
-		udbg_printf("		      .size     = 0x%lx\n",
+		DBG("		      .size     = 0x%lx\n",
 			    lmb.reserved.region[i].size);
 	}
 #endif /* DEBUG */

From f9e4ec57c66586d0c165ed9373efaf9e329d5766 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Tue, 15 Nov 2005 15:16:38 +1100
Subject: [PATCH 04/12] [PATCH] powerpc: More debugging fixups

Add a few more missing includes of udbg.h

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/pci_64.c         | 2 +-
 arch/powerpc/kernel/setup-common.c   | 1 +
 arch/powerpc/kernel/smp.c            | 7 ++++---
 arch/powerpc/platforms/pseries/smp.c | 1 +
 4 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 3cef1b8f57f0..d7de3ec0bf83 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -30,10 +30,10 @@
 #include <asm/byteorder.h>
 #include <asm/irq.h>
 #include <asm/machdep.h>
-#include <asm/udbg.h>
 #include <asm/ppc-pci.h>
 
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 33e7f2c7f194..bd3eb4292b53 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -59,6 +59,7 @@
 #undef DEBUG
 
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 62dfc5b8d765..30374d2f88e5 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -49,15 +49,16 @@
 #include <asm/paca.h>
 #endif
 
-int smp_hw_index[NR_CPUS];
-struct thread_info *secondary_ti;
-
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)
 #endif
 
+int smp_hw_index[NR_CPUS];
+struct thread_info *secondary_ti;
+
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE };
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 5800cde7d5ad..25181c594d73 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -51,6 +51,7 @@
 #include "plpar_wrappers.h"
 
 #ifdef DEBUG
+#include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
 #define DBG(fmt...)

From b5166cc252190be80465f3b4f050e4a0310f71af Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 15 Nov 2005 16:05:33 +1100
Subject: [PATCH 05/12] [PATCH] powerpc: pci_64 fixes & cleanups

I discovered that in some cases (PowerMac for example) we wouldn't
properly map the PCI IO space on recent kernels. In addition, the code
for initializing PCI host bridges was scattered all over the place with
some duplication between platforms.

This patch fixes the problem and does a small cleanup by creating a
pcibios_alloc_controller() in pci_64.c that is similar to the one in
pci_32.c (just takes an additional device node argument) that takes care
of all the grunt allocation and initialisation work. It should work for
both boot time and dynamically allocated PHBs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/pci_64.c          | 68 +++++++++++++++++++++++++--
 arch/powerpc/kernel/rtas_pci.c        | 68 ++-------------------------
 arch/powerpc/platforms/iseries/pci.c  |  3 +-
 arch/powerpc/platforms/maple/pci.c    | 16 +------
 arch/powerpc/platforms/powermac/pci.c | 62 ++++++++++++------------
 include/asm-powerpc/ppc-pci.h         |  1 -
 include/asm-ppc64/pci-bridge.h        | 14 ++++--
 7 files changed, 114 insertions(+), 118 deletions(-)

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index d7de3ec0bf83..5a5b24685081 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -187,7 +187,7 @@ static DEFINE_SPINLOCK(hose_spinlock);
 /*
  * pci_controller(phb) initialized common variables.
  */
-void __devinit pci_setup_pci_controller(struct pci_controller *hose)
+static void __devinit pci_setup_pci_controller(struct pci_controller *hose)
 {
 	memset(hose, 0, sizeof(struct pci_controller));
 
@@ -197,6 +197,65 @@ void __devinit pci_setup_pci_controller(struct pci_controller *hose)
 	spin_unlock(&hose_spinlock);
 }
 
+static void add_linux_pci_domain(struct device_node *dev,
+				 struct pci_controller *phb)
+{
+	struct property *of_prop;
+	unsigned int size;
+
+	of_prop = (struct property *)
+		get_property(dev, "linux,pci-domain", &size);
+	if (of_prop != NULL)
+		return;
+	WARN_ON(of_prop && size < sizeof(int));
+	if (of_prop && size < sizeof(int))
+		of_prop = NULL;
+	size = sizeof(struct property) + sizeof(int);
+	if (of_prop == NULL) {
+		if (mem_init_done)
+			of_prop = kmalloc(size, GFP_KERNEL);
+		else
+			of_prop = alloc_bootmem(size);
+	}
+	memset(of_prop, 0, sizeof(struct property));
+	of_prop->name = "linux,pci-domain";
+	of_prop->length = sizeof(int);
+	of_prop->value = (unsigned char *)&of_prop[1];
+	*((int *)of_prop->value) = phb->global_number;
+	prom_add_property(dev, of_prop);
+}
+
+struct pci_controller * pcibios_alloc_controller(struct device_node *dev)
+{
+	struct pci_controller *phb;
+
+	if (mem_init_done)
+		phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+	else
+		phb = alloc_bootmem(sizeof (struct pci_controller));
+	if (phb == NULL)
+		return NULL;
+	pci_setup_pci_controller(phb);
+	phb->arch_data = dev;
+	phb->is_dynamic = mem_init_done;
+	if (dev)
+		add_linux_pci_domain(dev, phb);
+	return phb;
+}
+
+void pcibios_free_controller(struct pci_controller *phb)
+{
+	if (phb->arch_data) {
+		struct device_node *np = phb->arch_data;
+		int *domain = (int *)get_property(np,
+						  "linux,pci-domain", NULL);
+		if (domain)
+			*domain = -1;
+	}
+	if (phb->is_dynamic)
+		kfree(phb);
+}
+
 static void __init pcibios_claim_one_bus(struct pci_bus *b)
 {
 	struct pci_dev *dev;
@@ -907,9 +966,10 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 	 *			(size depending on dev->n_addr_cells)
 	 *   cells 4+5 or 5+6:	the size of the range
 	 */
-	rlen = 0;
-	hose->io_base_phys = 0;
 	ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+	if (ranges == NULL)
+		return;
+	hose->io_base_phys = 0;
 	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
 		res = NULL;
 		pci_space = ranges[0];
@@ -1107,6 +1167,8 @@ int remap_bus_range(struct pci_bus *bus)
 	
 	if (get_bus_io_range(bus, &start_phys, &start_virt, &size))
 		return 1;
+	if (start_phys == 0)
+		return 1;
 	printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size);
 	if (__ioremap_explicit(start_phys, start_virt, size,
 			       _PAGE_NO_CACHE | _PAGE_GUARDED))
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 0e5a8e116653..60dec2401c26 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -304,75 +304,18 @@ static int __devinit setup_phb(struct device_node *dev,
 			       struct pci_controller *phb,
 			       unsigned int addr_size_words)
 {
-	pci_setup_pci_controller(phb);
-
 	if (is_python(dev))
 		python_countermeasures(dev, addr_size_words);
 
 	if (phb_set_bus_ranges(dev, phb))
 		return 1;
 
-	phb->arch_data = dev;
 	phb->ops = &rtas_pci_ops;
 	phb->buid = get_phb_buid(dev);
 
 	return 0;
 }
 
-static void __devinit add_linux_pci_domain(struct device_node *dev,
-					   struct pci_controller *phb,
-					   struct property *of_prop)
-{
-	memset(of_prop, 0, sizeof(struct property));
-	of_prop->name = "linux,pci-domain";
-	of_prop->length = sizeof(phb->global_number);
-	of_prop->value = (unsigned char *)&of_prop[1];
-	memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number));
-	prom_add_property(dev, of_prop);
-}
-
-static struct pci_controller * __init alloc_phb(struct device_node *dev,
-						unsigned int addr_size_words)
-{
-	struct pci_controller *phb;
-	struct property *of_prop;
-
-	phb = alloc_bootmem(sizeof(struct pci_controller));
-	if (phb == NULL)
-		return NULL;
-
-	of_prop = alloc_bootmem(sizeof(struct property) +
-				sizeof(phb->global_number));
-	if (!of_prop)
-		return NULL;
-
-	if (setup_phb(dev, phb, addr_size_words))
-		return NULL;
-
-	add_linux_pci_domain(dev, phb, of_prop);
-
-	return phb;
-}
-
-static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words)
-{
-	struct pci_controller *phb;
-
-	phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller),
-					       GFP_KERNEL);
-	if (phb == NULL)
-		return NULL;
-
-	if (setup_phb(dev, phb, addr_size_words))
-		return NULL;
-
-	phb->is_dynamic = 1;
-
-	/* TODO: linux,pci-domain? */
-
- 	return phb;
-}
-
 unsigned long __init find_and_init_phbs(void)
 {
 	struct device_node *node;
@@ -397,10 +340,10 @@ unsigned long __init find_and_init_phbs(void)
 		if (node->type == NULL || strcmp(node->type, "pci") != 0)
 			continue;
 
-		phb = alloc_phb(node, root_size_cells);
+		phb = pcibios_alloc_controller(node);
 		if (!phb)
 			continue;
-
+		setup_phb(node, phb, root_size_cells);
 		pci_process_bridge_OF_ranges(phb, node, 0);
 		pci_setup_phb_io(phb, index == 0);
 #ifdef CONFIG_PPC_PSERIES
@@ -446,10 +389,10 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
 	root_size_cells = prom_n_size_cells(root);
 
 	primary = list_empty(&hose_list);
-	phb = alloc_phb_dynamic(dn, root_size_cells);
+	phb = pcibios_alloc_controller(dn);
 	if (!phb)
 		return NULL;
-
+	setup_phb(dn, phb, root_size_cells);
 	pci_process_bridge_OF_ranges(phb, dn, primary);
 
 	pci_setup_phb_io_dynamic(phb, primary);
@@ -505,8 +448,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
 	}
 
 	list_del(&phb->list_node);
-	if (phb->is_dynamic)
-		kfree(phb);
+	pcibios_free_controller(phb);
 
 	return 0;
 }
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 4b75131773a6..dafc518fbb83 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -244,10 +244,9 @@ unsigned long __init find_and_init_phbs(void)
 		if (ret == 0) {
 			printk("bus %d appears to exist\n", bus);
 
-			phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+			phb = pcibios_alloc_controller(NULL);
 			if (phb == NULL)
 				return -ENOMEM;
-			pci_setup_pci_controller(phb);
 
 			phb->pci_mem_offset = phb->local_number = bus;
 			phb->first_busno = bus;
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 895aeb3f75d0..f40451da037c 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -326,26 +326,12 @@ static int __init add_bridge(struct device_node *dev)
 		dev->full_name);
 	}
 
-	hose = alloc_bootmem(sizeof(struct pci_controller));
+	hose = pcibios_alloc_controller(dev);
 	if (hose == NULL)
 		return -ENOMEM;
-	pci_setup_pci_controller(hose);
-
-	hose->arch_data = dev;
 	hose->first_busno = bus_range ? bus_range[0] : 0;
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-	of_prop = alloc_bootmem(sizeof(struct property) +
-				sizeof(hose->global_number));
-	if (of_prop) {
-		memset(of_prop, 0, sizeof(struct property));
-		of_prop->name = "linux,pci-domain";
-		of_prop->length = sizeof(hose->global_number);
-		of_prop->value = (unsigned char *)&of_prop[1];
-		memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number));
-		prom_add_property(dev, of_prop);
-	}
-
 	disp_name = NULL;
 	if (device_is_compatible(dev, "u3-agp")) {
 		setup_u3_agp(hose);
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index dfd41b9781a9..443be526cde7 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -640,15 +640,16 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 	 * the reg address cell, we shall fix that by killing struct
 	 * reg_property and using some accessor functions instead
 	 */
-	hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
+	hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000,
+							   0x02000000);
 
 	/*
-	 * /ht node doesn't expose a "ranges" property, so we "remove" regions that
-	 * have been allocated to AGP. So far, this version of the code doesn't assign
-	 * any of the 0xfxxxxxxx "fine" memory regions to /ht.
-	 * We need to fix that sooner or later by either parsing all child "ranges"
-	 * properties or figuring out the U3 address space decoding logic and
-	 * then read its configuration register (if any).
+	 * /ht node doesn't expose a "ranges" property, so we "remove"
+	 * regions that have been allocated to AGP. So far, this version of
+	 * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions
+	 * to /ht. We need to fix that sooner or later by either parsing all
+	 * child "ranges" properties or figuring out the U3 address space
+	 * decoding logic and then read its configuration register (if any).
 	 */
 	hose->io_base_phys = 0xf4000000;
 	hose->pci_io_size = 0x00400000;
@@ -671,10 +672,10 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 		return;
 	}
 
-	/* We "remove" the AGP resources from the resources allocated to HT, that
-	 * is we create "holes". However, that code does assumptions that so far
-	 * happen to be true (cross fingers...), typically that resources in the
-	 * AGP node are properly ordered
+	/* We "remove" the AGP resources from the resources allocated to HT,
+	 * that is we create "holes". However, that code does assumptions
+	 * that so far happen to be true (cross fingers...), typically that
+	 * resources in the AGP node are properly ordered
 	 */
 	cur = 0;
 	for (i=0; i<3; i++) {
@@ -684,23 +685,30 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 		/* We don't care about "fine" resources */
 		if (res->start >= 0xf0000000)
 			continue;
-		/* Check if it's just a matter of "shrinking" us in one direction */
+		/* Check if it's just a matter of "shrinking" us in one
+		 * direction
+		 */
 		if (hose->mem_resources[cur].start == res->start) {
 			DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
-			    cur, hose->mem_resources[cur].start, res->end + 1);
+			    cur, hose->mem_resources[cur].start,
+			    res->end + 1);
 			hose->mem_resources[cur].start = res->end + 1;
 			continue;
 		}
 		if (hose->mem_resources[cur].end == res->end) {
 			DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
-			    cur, hose->mem_resources[cur].end, res->start - 1);
+			    cur, hose->mem_resources[cur].end,
+			    res->start - 1);
 			hose->mem_resources[cur].end = res->start - 1;
 			continue;
 		}
 		/* No, it's not the case, we need a hole */
 		if (cur == 2) {
-			/* not enough resources for a hole, we drop part of the range */
-			printk(KERN_WARNING "Running out of resources for /ht host !\n");
+			/* not enough resources for a hole, we drop part
+			 * of the range
+			 */
+			printk(KERN_WARNING "Running out of resources"
+			       " for /ht host !\n");
 			hose->mem_resources[cur].end = res->start - 1;
 			continue;
 		}
@@ -714,17 +722,6 @@ static void __init setup_u3_ht(struct pci_controller* hose)
 		hose->mem_resources[cur-1].end = res->start - 1;
 	}
 }
-
-/* XXX this needs to be converged between ppc32 and ppc64... */
-static struct pci_controller * __init pcibios_alloc_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = alloc_bootmem(sizeof(struct pci_controller));
-	if (hose)
-		pci_setup_pci_controller(hose);
-	return hose;
-}
 #endif
 
 /*
@@ -756,11 +753,16 @@ static int __init add_bridge(struct device_node *dev)
 #endif
 	bus_range = (int *) get_property(dev, "bus-range", &len);
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
-			       dev->full_name);
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
 	}
 
+	/* XXX Different prototypes, to be merged */
+#ifdef CONFIG_PPC64
+	hose = pcibios_alloc_controller(dev);
+#else
 	hose = pcibios_alloc_controller();
+#endif
 	if (!hose)
 		return -ENOMEM;
 	hose->arch_data = dev;
@@ -768,7 +770,7 @@ static int __init add_bridge(struct device_node *dev)
 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
 	disp_name = NULL;
-#ifdef CONFIG_POWER4
+#ifdef CONFIG_PPC64
 	if (device_is_compatible(dev, "u3-agp")) {
 		setup_u3_agp(hose);
 		disp_name = "U3-AGP";
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index 9896fade98a7..2e36e5a7f4f3 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -14,7 +14,6 @@
 
 extern unsigned long isa_io_base;
 
-extern void pci_setup_pci_controller(struct pci_controller *hose);
 extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
 extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
 
diff --git a/include/asm-ppc64/pci-bridge.h b/include/asm-ppc64/pci-bridge.h
index efbdaece0cf0..cf04327a597a 100644
--- a/include/asm-ppc64/pci-bridge.h
+++ b/include/asm-ppc64/pci-bridge.h
@@ -61,12 +61,14 @@ struct pci_dn {
 	int	busno;			/* for pci devices */
 	int	bussubno;		/* for pci devices */
 	int	devfn;			/* for pci devices */
+
+#ifdef CONFIG_PPC_PSERIES
 	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
 	int	eeh_config_addr;
 	int 	eeh_check_count;	/* # times driver ignored error */
 	int 	eeh_freeze_count;	/* # times this device froze up. */
 	int	eeh_is_bridge;		/* device is pci-to-pci bridge */
-
+#endif
 	int	pci_ext_config_space;	/* for pci devices */
 	struct  pci_controller *phb;	/* for pci devices */
 	struct	iommu_table *iommu_table;	/* for phb's or bridges */
@@ -74,9 +76,9 @@ struct pci_dn {
 	struct	device_node *node;	/* back-pointer to the device_node */
 #ifdef CONFIG_PPC_ISERIES
 	struct	list_head Device_List;
-	int		Irq;		/* Assigned IRQ */
-	int		Flags;		/* Possible flags(disable/bist)*/
-	u8		LogicalSlot;	/* Hv Slot Index for Tces */
+	int	Irq;			/* Assigned IRQ */
+	int	Flags;			/* Possible flags(disable/bist)*/
+	u8	LogicalSlot;		/* Hv Slot Index for Tces */
 #endif
 	u32	config_space[16];	/* saved PCI config space */
 };
@@ -136,6 +138,10 @@ static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
 	return PCI_DN(busdn)->phb;
 }
 
+extern struct pci_controller *
+pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
 /* Return values for ppc_md.pci_probe_mode function */
 #define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
 #define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */

From c0ce5c5228dd17d4e3dd1d15b8d52714262cab70 Mon Sep 17 00:00:00 2001
From: Guido Guenther <agx@sigxcpu.org>
Date: Tue, 15 Nov 2005 17:28:05 +1100
Subject: [PATCH 06/12] [PATCH] PowerBook 6,1: headphone not detected after
 suspend

ever since suspend to disk works I had the problem that headphone
(un)plugging doesn't get detected properly anymore after the first
resume.
Reloading the module worked around this ever since, however the real
cause of the problem was that after a resume the driver only got
interrupts on "unplug" not on "plug". Reactivating the headphone status
interrupt in tumbler_resume fixes this. This shouldn't cause
any trouble with software suspend, but it would be nice if somebody
could confirm this:

Signed-off-by: Guido Guenther <agx@sigxcpu.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 sound/ppc/tumbler.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 65384afcfc3f..d74bfabe5300 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -1194,8 +1194,14 @@ static void tumbler_resume(pmac_t *chip)
 	tumbler_set_master_volume(mix);
 	if (chip->update_automute)
 		chip->update_automute(chip, 0);
-	if (mix->headphone_irq >= 0)
+	if (mix->headphone_irq >= 0) {
+		unsigned char val;
+
 		enable_irq(mix->headphone_irq);
+		/* activate headphone status interrupts */
+		val = do_gpio_read(&mix->hp_detect);
+		do_gpio_write(&mix->hp_detect, val | 0x80);
+	}
 	if (mix->lineout_irq >= 0)
 		enable_irq(mix->lineout_irq);
 }

From de93f0d62ccaa730fd46de14d46c0317bd82596a Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 15 Nov 2005 18:21:45 +1100
Subject: [PATCH 07/12] [PATCH] ppc: Fix boot with yaboot with ARCH=ppc

The merge of machine types broke boot with yaboot & ARCH=ppc due to the
old code still retreiving the old-syle machine type passed in by yaboot.
This patch fixes it by translating those old numbers. Since that whole
mecanism is deprecated, this is a temporary fix until ARCH=ppc uses the
new prom_init that the merged architecture now uses for both ppc32 and
ppc64 (after 2.6.15)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/ppc/kernel/setup.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index dc55e1abc45b..0eb0b7085e6a 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -602,7 +602,19 @@ void parse_bootinfo(struct bi_record *rec)
 #endif /* CONFIG_BLK_DEV_INITRD */
 #ifdef CONFIG_PPC_MULTIPLATFORM
 		case BI_MACHTYPE:
-			_machine = data[0];
+			/* Machine types changed with the merge. Since the
+			 * bootinfo are now deprecated, we can just hard code
+			 * the appropriate conversion here for when we are
+			 * called with yaboot which passes us a machine type
+			 * this way.
+			 */
+			switch(data[0]) {
+			case 1: _machine = _MACH_prep; break;
+			case 2: _machine = _MACH_Pmac; break;
+			case 4: _machine = _MACH_chrp; break;
+			default:
+				_machine = data[0];
+			}
 			break;
 #endif
 		case BI_MEMSIZE:

From 950fc0025f8566d1c44da04fed216513f83268af Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@lixom.net>
Date: Tue, 15 Nov 2005 09:05:14 -0800
Subject: [PATCH 08/12] [PATCH] powerpc: add new powerbooks to feature table

Hi,

The previous PowerBook patch didn't contain the feature table updates
for ARCH=powerpc. Here they are.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/powermac/feature.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 10f1d942c661..0d7fa00fcb00 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2362,6 +2362,14 @@ static struct pmac_mb_def pmac_mb_defs[] = {
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
 	},
+	{	"PowerBook5,8",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,9",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
 	{	"PowerBook6,1",			"PowerBook G4 12\"",
 		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
 		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,

From 7486a38f683d49e6f8b2b9050ff06778b151a40c Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@gate.crashing.org>
Date: Tue, 15 Nov 2005 11:03:24 -0600
Subject: [PATCH 09/12] [PATCH] powerpc: replace page_to_virt() with
 lowmem_page_address() for Book-E

page_to_virt and lowmem_page_address provided equiavlent functionality
so use the more standard lowmem_page_address

This also addresses build issue in ARCH=powerpc since page_to_virt()
has been removed from include/asm-powerpc/page.h

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 include/asm-ppc/pgalloc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h
index 931b6de7ef53..bdefd1c4a558 100644
--- a/include/asm-ppc/pgalloc.h
+++ b/include/asm-ppc/pgalloc.h
@@ -28,7 +28,7 @@ extern void pgd_free(pgd_t *pgd);
 #define pmd_populate_kernel(mm, pmd, pte)	\
 		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
 #define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
 #endif
 
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);

From 94b212c29f685ca54b5689a8e89ac7671c43d651 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Wed, 16 Nov 2005 13:38:21 +1100
Subject: [PATCH 10/12] powerpc: Move ppc64 boot wrapper code over to
 arch/powerpc

This also extends the code to handle 32-bit ELF vmlinux files as well
as 64-bit ones.  This is sufficient for booting on new-world 32-bit
powermacs (i.e. all recent machines).

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/Makefile                     |  25 ++---
 arch/{ppc64 => powerpc}/boot/Makefile     |   5 +-
 arch/{ppc64 => powerpc}/boot/README       |   0
 arch/{ppc64 => powerpc}/boot/addRamDisk.c |   0
 arch/{ppc64 => powerpc}/boot/addnote.c    |   0
 arch/{ppc64 => powerpc}/boot/crt0.S       |   0
 arch/{ppc64 => powerpc}/boot/div64.S      |   0
 arch/{ppc64 => powerpc}/boot/elf.h        |   0
 arch/{ppc64 => powerpc}/boot/install.sh   |   0
 arch/{ppc64 => powerpc}/boot/main.c       | 122 ++++++++++++++--------
 arch/{ppc64 => powerpc}/boot/page.h       |   0
 arch/{ppc64 => powerpc}/boot/ppc_asm.h    |   0
 arch/{ppc64 => powerpc}/boot/prom.c       |   0
 arch/{ppc64 => powerpc}/boot/prom.h       |   0
 arch/{ppc64 => powerpc}/boot/stdio.h      |   0
 arch/{ppc64 => powerpc}/boot/string.S     |   0
 arch/{ppc64 => powerpc}/boot/string.h     |   0
 arch/{ppc64 => powerpc}/boot/zImage.lds   |   0
 18 files changed, 91 insertions(+), 61 deletions(-)
 rename arch/{ppc64 => powerpc}/boot/Makefile (96%)
 rename arch/{ppc64 => powerpc}/boot/README (100%)
 rename arch/{ppc64 => powerpc}/boot/addRamDisk.c (100%)
 rename arch/{ppc64 => powerpc}/boot/addnote.c (100%)
 rename arch/{ppc64 => powerpc}/boot/crt0.S (100%)
 rename arch/{ppc64 => powerpc}/boot/div64.S (100%)
 rename arch/{ppc64 => powerpc}/boot/elf.h (100%)
 rename arch/{ppc64 => powerpc}/boot/install.sh (100%)
 rename arch/{ppc64 => powerpc}/boot/main.c (77%)
 rename arch/{ppc64 => powerpc}/boot/page.h (100%)
 rename arch/{ppc64 => powerpc}/boot/ppc_asm.h (100%)
 rename arch/{ppc64 => powerpc}/boot/prom.c (100%)
 rename arch/{ppc64 => powerpc}/boot/prom.h (100%)
 rename arch/{ppc64 => powerpc}/boot/stdio.h (100%)
 rename arch/{ppc64 => powerpc}/boot/string.S (100%)
 rename arch/{ppc64 => powerpc}/boot/string.h (100%)
 rename arch/{ppc64 => powerpc}/boot/zImage.lds (100%)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index d41ad2e675db..99dbea8c5c50 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -14,10 +14,6 @@
 
 HAS_BIARCH	:= $(call cc-option-yn, -m32)
 
-ifeq ($(CONFIG_PPC64),y)
-OLDARCH	:= ppc64
-SZ	:= 64
-
 # Set default 32 bits cross compilers for vdso and boot wrapper
 CROSS32_COMPILE ?=
 
@@ -37,6 +33,10 @@ endif
 
 export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
 
+ifeq ($(CONFIG_PPC64),y)
+OLDARCH	:= ppc64
+SZ	:= 64
+
 new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
 
 ifeq ($(new_nm),y)
@@ -139,7 +139,7 @@ drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
-defaultimage-$(CONFIG_PPC32)	:= uImage zImage
+defaultimage-$(CONFIG_PPC32)	:= zImage
 defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
 defaultimage-$(CONFIG_PPC_PSERIES) := zImage
 KBUILD_IMAGE := $(defaultimage-y)
@@ -154,23 +154,13 @@ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
 .PHONY: $(BOOT_TARGETS)
 
-boot := arch/$(OLDARCH)/boot
+boot := arch/$(ARCH)/boot
 
-# urk
-ifeq ($(CONFIG_PPC64),y)
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-else
-$(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) ARCH=ppc $(build)=$(boot) $@
-endif
-
-uImage: vmlinux
-	$(Q)$(MAKE) ARCH=$(OLDARCH) $(build)=$(boot)/images $(boot)/images/$@
 
 define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)'
-  @echo '  uImage          - Create a bootable image for U-Boot / PPCBoot'
+  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
   @echo '  install         - Install kernel using'
   @echo '                    (your) ~/bin/installkernel or'
   @echo '                    (distribution) /sbin/installkernel or'
@@ -180,7 +170,6 @@ endef
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
-	# Temporary hack until we have migrated to asm-powerpc
 	$(Q)rm -rf arch/$(ARCH)/include
 
 archprepare: checkbin
diff --git a/arch/ppc64/boot/Makefile b/arch/powerpc/boot/Makefile
similarity index 96%
rename from arch/ppc64/boot/Makefile
rename to arch/powerpc/boot/Makefile
index 301bc1536c49..9770f587af73 100644
--- a/arch/ppc64/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -22,7 +22,8 @@
 
 
 HOSTCC		:= gcc
-BOOTCFLAGS	:= $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) -fPIC
+BOOTCFLAGS	:= $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
+		   $(shell $(CROSS32CC) -print-file-name=include) -fPIC
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
 BOOTLFLAGS	:= -T $(srctree)/$(src)/zImage.lds
 OBJCOPYFLAGS    := contents,alloc,load,readonly,data
@@ -98,7 +99,7 @@ quiet_cmd_ramdisk = RAMDISK $@
       cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@
 
 quiet_cmd_stripvm = STRIP   $@
-      cmd_stripvm = $(STRIP) -s $< -o $@
+      cmd_stripvm = $(STRIP) -s -R .comment $< -o $@
 
 vmlinux.strip: vmlinux
 	$(call if_changed,stripvm)
diff --git a/arch/ppc64/boot/README b/arch/powerpc/boot/README
similarity index 100%
rename from arch/ppc64/boot/README
rename to arch/powerpc/boot/README
diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c
similarity index 100%
rename from arch/ppc64/boot/addRamDisk.c
rename to arch/powerpc/boot/addRamDisk.c
diff --git a/arch/ppc64/boot/addnote.c b/arch/powerpc/boot/addnote.c
similarity index 100%
rename from arch/ppc64/boot/addnote.c
rename to arch/powerpc/boot/addnote.c
diff --git a/arch/ppc64/boot/crt0.S b/arch/powerpc/boot/crt0.S
similarity index 100%
rename from arch/ppc64/boot/crt0.S
rename to arch/powerpc/boot/crt0.S
diff --git a/arch/ppc64/boot/div64.S b/arch/powerpc/boot/div64.S
similarity index 100%
rename from arch/ppc64/boot/div64.S
rename to arch/powerpc/boot/div64.S
diff --git a/arch/ppc64/boot/elf.h b/arch/powerpc/boot/elf.h
similarity index 100%
rename from arch/ppc64/boot/elf.h
rename to arch/powerpc/boot/elf.h
diff --git a/arch/ppc64/boot/install.sh b/arch/powerpc/boot/install.sh
similarity index 100%
rename from arch/ppc64/boot/install.sh
rename to arch/powerpc/boot/install.sh
diff --git a/arch/ppc64/boot/main.c b/arch/powerpc/boot/main.c
similarity index 77%
rename from arch/ppc64/boot/main.c
rename to arch/powerpc/boot/main.c
index e0dde24a72ce..64ec93116fa6 100644
--- a/arch/ppc64/boot/main.c
+++ b/arch/powerpc/boot/main.c
@@ -42,6 +42,8 @@ static struct addr_range vmlinux;
 static struct addr_range vmlinuz;
 static struct addr_range initrd;
 
+static unsigned long elfoffset;
+
 static char scratch[46912];	/* scratch space for gunzip, from zlib_inflate_workspacesize() */
 static char elfheader[256];
 
@@ -131,13 +133,70 @@ static unsigned long try_claim(unsigned long size)
 	return addr;
 }
 
+static int is_elf64(void *hdr)
+{
+	Elf64_Ehdr *elf64 = hdr;
+	Elf64_Phdr *elf64ph;
+	unsigned int i;
+
+	if (!(elf64->e_ident[EI_MAG0]  == ELFMAG0	&&
+	      elf64->e_ident[EI_MAG1]  == ELFMAG1	&&
+	      elf64->e_ident[EI_MAG2]  == ELFMAG2	&&
+	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
+	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
+	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+	      elf64->e_type            == ET_EXEC	&&
+	      elf64->e_machine         == EM_PPC64))
+		return 0;
+
+	elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
+				 (unsigned long)elf64->e_phoff);
+	for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++)
+		if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0)
+			break;
+	if (i >= (unsigned int)elf64->e_phnum)
+		return 0;
+
+	elfoffset = (unsigned long)elf64ph->p_offset;
+	vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset;
+	vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset;
+	return 1;
+}
+
+static int is_elf32(void *hdr)
+{
+	Elf32_Ehdr *elf32 = hdr;
+	Elf32_Phdr *elf32ph;
+	unsigned int i;
+
+	if (!(elf32->e_ident[EI_MAG0]  == ELFMAG0	&&
+	      elf32->e_ident[EI_MAG1]  == ELFMAG1	&&
+	      elf32->e_ident[EI_MAG2]  == ELFMAG2	&&
+	      elf32->e_ident[EI_MAG3]  == ELFMAG3	&&
+	      elf32->e_ident[EI_CLASS] == ELFCLASS32	&&
+	      elf32->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+	      elf32->e_type            == ET_EXEC	&&
+	      elf32->e_machine         == EM_PPC))
+		return 0;
+
+	elf32 = (Elf32_Ehdr *)elfheader;
+	elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff);
+	for (i = 0; i < elf32->e_phnum; i++, elf32ph++)
+		if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0)
+			break;
+	if (i >= elf32->e_phnum)
+		return 0;
+
+	elfoffset = elf32ph->p_offset;
+	vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset;
+	vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset;
+	return 1;
+}
+
 void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 {
-	unsigned long i;
 	int len;
 	kernel_entry_t kernel_entry;
-	Elf64_Ehdr *elf64;
-	Elf64_Phdr *elf64ph;
 
 	memset(__bss_start, 0, _end - __bss_start);
 
@@ -153,6 +212,22 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 
 	printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp);
 
+	vmlinuz.addr = (unsigned long)_vmlinux_start;
+	vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
+
+	/* gunzip the ELF header of the kernel */
+	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
+		len = vmlinuz.size;
+		gunzip(elfheader, sizeof(elfheader),
+				(unsigned char *)vmlinuz.addr, &len);
+	} else
+		memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader));
+
+	if (!is_elf64(elfheader) && !is_elf32(elfheader)) {
+		printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r");
+		exit();
+	}
+
 	/*
 	 * The first available claim_base must be above the end of the
 	 * the loaded kernel wrapper file (_start to _end includes the
@@ -172,46 +247,11 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 		claim_base = PROG_START;
 #endif
 
-	vmlinuz.addr = (unsigned long)_vmlinux_start;
-	vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start);
-
-	/* gunzip the ELF header of the kernel */
-	if (*(unsigned short *)vmlinuz.addr == 0x1f8b) {
-		len = vmlinuz.size;
-		gunzip(elfheader, sizeof(elfheader),
-				(unsigned char *)vmlinuz.addr, &len);
-	} else
-		memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader));
-
-	elf64 = (Elf64_Ehdr *)elfheader;
-	if ( elf64->e_ident[EI_MAG0]  != ELFMAG0	||
-	     elf64->e_ident[EI_MAG1]  != ELFMAG1	||
-	     elf64->e_ident[EI_MAG2]  != ELFMAG2	||
-	     elf64->e_ident[EI_MAG3]  != ELFMAG3	||
-	     elf64->e_ident[EI_CLASS] != ELFCLASS64	||
-	     elf64->e_ident[EI_DATA]  != ELFDATA2MSB	||
-	     elf64->e_type            != ET_EXEC	||
-	     elf64->e_machine         != EM_PPC64 )
-	{
-		printf("Error: not a valid PPC64 ELF file!\n\r");
-		exit();
-	}
-
-	elf64ph = (Elf64_Phdr *)((unsigned long)elf64 +
-				(unsigned long)elf64->e_phoff);
-	for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) {
-		if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0)
-			break;
-	}
-	vmlinux.size = (unsigned long)elf64ph->p_filesz +
-		(unsigned long)elf64ph->p_offset;
 	/* We need to claim the memsize plus the file offset since gzip
 	 * will expand the header (file offset), then the kernel, then
 	 * possible rubbish we don't care about. But the kernel bss must
 	 * be claimed (it will be zero'd by the kernel itself)
 	 */
-	vmlinux.memsize = (unsigned long)elf64ph->p_memsz +
-		(unsigned long)elf64ph->p_offset;
 	printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize);
 	vmlinux.addr = try_claim(vmlinux.memsize);
 	if (vmlinux.addr == 0) {
@@ -254,9 +294,9 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 	/* Skip over the ELF header */
 #ifdef DEBUG
 	printf("... skipping 0x%lx bytes of ELF header\n\r",
-			(unsigned long)elf64ph->p_offset);
+			elfoffset);
 #endif
-	vmlinux.addr += (unsigned long)elf64ph->p_offset;
+	vmlinux.addr += elfoffset;
 
 	flush_cache((void *)vmlinux.addr, vmlinux.size);
 
@@ -272,7 +312,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
 		(unsigned long)prom, NULL);
 #endif
 
-	kernel_entry( a1, a2, prom, NULL );
+	kernel_entry(a1, a2, prom, NULL);
 
 	printf("Error: Linux kernel returned to zImage bootloader!\n\r");
 
diff --git a/arch/ppc64/boot/page.h b/arch/powerpc/boot/page.h
similarity index 100%
rename from arch/ppc64/boot/page.h
rename to arch/powerpc/boot/page.h
diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h
similarity index 100%
rename from arch/ppc64/boot/ppc_asm.h
rename to arch/powerpc/boot/ppc_asm.h
diff --git a/arch/ppc64/boot/prom.c b/arch/powerpc/boot/prom.c
similarity index 100%
rename from arch/ppc64/boot/prom.c
rename to arch/powerpc/boot/prom.c
diff --git a/arch/ppc64/boot/prom.h b/arch/powerpc/boot/prom.h
similarity index 100%
rename from arch/ppc64/boot/prom.h
rename to arch/powerpc/boot/prom.h
diff --git a/arch/ppc64/boot/stdio.h b/arch/powerpc/boot/stdio.h
similarity index 100%
rename from arch/ppc64/boot/stdio.h
rename to arch/powerpc/boot/stdio.h
diff --git a/arch/ppc64/boot/string.S b/arch/powerpc/boot/string.S
similarity index 100%
rename from arch/ppc64/boot/string.S
rename to arch/powerpc/boot/string.S
diff --git a/arch/ppc64/boot/string.h b/arch/powerpc/boot/string.h
similarity index 100%
rename from arch/ppc64/boot/string.h
rename to arch/powerpc/boot/string.h
diff --git a/arch/ppc64/boot/zImage.lds b/arch/powerpc/boot/zImage.lds
similarity index 100%
rename from arch/ppc64/boot/zImage.lds
rename to arch/powerpc/boot/zImage.lds

From d3ed65832029dcaf5fe086670a2f2c25600b51e9 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 16 Nov 2005 13:40:43 +1100
Subject: [PATCH 11/12] [PATCH] ppc: Fix build with CONFIG_CHRP not set

Building ARCH=ppc for multiplatforms with CONFIG_CHRP not set fails
due to some unshielded code in xmon

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/ppc/xmon/start.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
index 98612d420346..c80177f8ec04 100644
--- a/arch/ppc/xmon/start.c
+++ b/arch/ppc/xmon/start.c
@@ -184,7 +184,9 @@ xmon_map_scc(void)
 		sccc = base + (addr & ~PAGE_MASK);
 		sccd = sccc + 0x10;
 
-	} else {
+	}
+#ifdef CONFIG_PPC_CHRP
+	else {
 		base = (volatile unsigned char *) isa_io_base;
 		if (_machine == _MACH_chrp)
 			base = (volatile unsigned char *)
@@ -200,6 +202,7 @@ xmon_map_scc(void)
 		RXRDY = 1;
 		DLAB = 0x80;
 	}
+#endif /* CONFIG_PPC_CHRP */
 #elif defined(CONFIG_GEMINI)
 	/* should already be mapped by the kernel boot */
 	sccc = (volatile unsigned char *) 0xffeffb0d;

From 5d66da3d71e6aeca80ca08dbebd8a1cd72e6ee1f Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 16 Nov 2005 13:54:32 +1100
Subject: [PATCH 12/12] [PATCH] powerpc: Make the vDSO functions set error code
 (#2)

The vDSO functions should have the same calling convention as a syscall.
Unfortunately, they currently don't set the cr0.so bit which is used to
indicate an error. This patch makes them clear this bit unconditionally
since all functions currently succeed. The syscall fallback done by some
of them will eventually override this if the syscall fails.

This also changes the symbol version of all vdso exports to make sure
glibc can differenciate between old and fixed calls for existing ones
like __kernel_gettimeofday.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/vdso32/cacheflush.S   | 2 ++
 arch/powerpc/kernel/vdso32/datapage.S     | 3 ++-
 arch/powerpc/kernel/vdso32/gettimeofday.S | 4 ++++
 arch/powerpc/kernel/vdso64/cacheflush.S   | 2 ++
 arch/powerpc/kernel/vdso64/datapage.S     | 3 ++-
 arch/powerpc/kernel/vdso64/gettimeofday.S | 4 ++++
 include/asm-powerpc/vdso.h                | 2 +-
 7 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S
index c8db993574ee..09629aea3e47 100644
--- a/arch/powerpc/kernel/vdso32/cacheflush.S
+++ b/arch/powerpc/kernel/vdso32/cacheflush.S
@@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache)
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
 	srwi.	r8,r8,7			/* compute line count */
+	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
 	mr	r3,r6
@@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache)
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache_p5)
   .cfi_startproc
+	crclr	cr0*4+so
 	sync
 	isync
 	li	r3,0
diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index f6b38472318d..4709f1d9542c 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -54,7 +54,6 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
   .cfi_startproc
 	mflr	r12
   .cfi_register lr,r12
-
 	mr	r4,r3
 	bl	__get_datapage@local
 	mtlr	r12
@@ -63,6 +62,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
 	beqlr
 	li	r0,__NR_syscalls
 	stw	r0,0(r4)
+	crclr	cr0*4+so
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_get_syscall_map)
@@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq)
 	lwz	r4,(CFG_TB_TICKS_PER_SEC + 4)(r3)
 	lwz	r3,CFG_TB_TICKS_PER_SEC(r3)
 	mtlr	r12
+	crclr	cr0*4+so
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_get_tbfreq)
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 0a32a41d50b0..7eebff03a041 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -59,6 +59,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday)
 	stw	r5,TZONE_TZ_DSTTIME(r11)
 
 1:	mtlr	r12
+	crclr	cr0*4+so
 	li	r3,0
 	blr
 
@@ -117,6 +118,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	mulli	r5,r5,1000
 	stw	r5,TSPC32_TV_NSEC(r11)
 	mtlr	r12
+	crclr	cr0*4+so
 	li	r3,0
 	blr
 
@@ -185,6 +187,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	stw	r4,TSPC32_TV_NSEC(r11)
 
 	mtlr	r12
+	crclr	cr0*4+so
 	li	r3,0
 	blr
 
@@ -219,6 +222,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres)
 
 	li	r3,0
 	cmpli	cr0,r4,0
+	crclr	cr0*4+so
 	beqlr
 	lis	r5,CLOCK_REALTIME_RES@h
 	ori	r5,r5,CLOCK_REALTIME_RES@l
diff --git a/arch/powerpc/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S
index d4a0ad28d534..cb4ae0a5edd0 100644
--- a/arch/powerpc/kernel/vdso64/cacheflush.S
+++ b/arch/powerpc/kernel/vdso64/cacheflush.S
@@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache)
 	subf	r8,r6,r4		/* compute length */
 	add	r8,r8,r5		/* ensure we get enough */
 	srwi.	r8,r8,7			/* compute line count */
+	crclr	cr0*4+so
 	beqlr				/* nothing to do? */
 	mtctr	r8
 	mr	r3,r6
@@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache)
  */
 V_FUNCTION_BEGIN(__kernel_sync_dicache_p5)
   .cfi_startproc
+	crclr	cr0*4+so
 	sync
 	isync
 	li	r3,0
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index 6393e4137bc7..3b2dd7d0c1eb 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -54,12 +54,12 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
   .cfi_startproc
 	mflr	r12
   .cfi_register lr,r12
-
 	mr	r4,r3
 	bl	V_LOCAL_FUNC(__get_datapage)
 	mtlr	r12
 	addi	r3,r3,CFG_SYSCALL_MAP64
 	cmpli	cr0,r4,0
+	crclr	cr0*4+so
 	beqlr
 	li	r0,__NR_syscalls
 	stw	r0,0(r4)
@@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq)
 	bl	V_LOCAL_FUNC(__get_datapage)
 	ld	r3,CFG_TB_TICKS_PER_SEC(r3)
 	mtlr	r12
+	crclr	cr0*4+so
 	blr
   .cfi_endproc
 V_FUNCTION_END(__kernel_get_tbfreq)
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index 1a89094715cc..ccaeda5136d1 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -52,6 +52,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday)
 	stw	r4,TZONE_TZ_MINWEST(r10)
 	stw	r5,TZONE_TZ_DSTTIME(r10)
 1:	mtlr	r12
+	crclr	cr0*4+so
 	li	r3,0			/* always success */
 	blr
   .cfi_endproc
@@ -99,6 +100,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	std	r0,TSPC64_TV_NSEC(r11)	/* store nsec in tp */
 
 	mtlr	r12
+	crclr	cr0*4+so
 	li	r3,0
 	blr
 
@@ -159,6 +161,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	std	r7,TSPC64_TV_NSEC(r11)
 
 	mtlr	r12
+	crclr	cr0*4+so
 	li	r3,0
 	blr
 
@@ -193,6 +196,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres)
 
 	li	r3,0
 	cmpli	cr0,r4,0
+	crclr	cr0*4+so
 	beqlr
 	lis	r5,CLOCK_REALTIME_RES@h
 	ori	r5,r5,CLOCK_REALTIME_RES@l
diff --git a/include/asm-powerpc/vdso.h b/include/asm-powerpc/vdso.h
index 85d8a7be25c4..b9f9118b1607 100644
--- a/include/asm-powerpc/vdso.h
+++ b/include/asm-powerpc/vdso.h
@@ -11,7 +11,7 @@
 #define VDSO32_MBASE	VDSO32_LBASE
 #define VDSO64_MBASE	VDSO64_LBASE
 
-#define VDSO_VERSION_STRING	LINUX_2.6.12
+#define VDSO_VERSION_STRING	LINUX_2.6.15
 
 /* Define if 64 bits VDSO has procedure descriptors */
 #undef VDS64_HAS_DESCRIPTORS