diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 38833e63a59f..8af1202b381d 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -61,6 +61,10 @@ Optional properties:
   There should be 9 entries here, one for each gpio.
 - ti,system-power-controller: Telling whether or not this pmic is controlling
   the system power.
+- ti,sleep-enable: Enable SLEEP state.
+- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state.
+- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state.
+- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state.
 
 Regulator Optional properties:
 - ti,regulator-ext-sleep-control: enable external sleep
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index d18edb075e1c..378f6dc8b8bd 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -24,6 +24,14 @@ Optional properties:
 - regulator-settling-time-us: Settling time, in microseconds, for voltage
   change if regulator have the constant time for any level voltage change.
   This is useful when regulator have exponential voltage change.
+- regulator-settling-time-up-us: Settling time, in microseconds, for voltage
+  increase if the regulator needs a constant time to settle after voltage
+  increases of any level. This is useful for regulators with exponential
+  voltage changes.
+- regulator-settling-time-down-us: Settling time, in microseconds, for voltage
+  decrease if the regulator needs a constant time to settle after voltage
+  decreases of any level. This is useful for regulators with exponential
+  voltage changes.
 - regulator-soft-start: Enable soft start so that voltage ramps slowly
 - regulator-state-mem sub-root node for Suspend-to-RAM mode
   : suspend to memory, the device goes to sleep, but all data stored in memory,
diff --git a/MAINTAINERS b/MAINTAINERS
index 67ab1aba1fcc..1f949b5a39d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8076,11 +8076,11 @@ S:	Supported
 F:	drivers/power/supply/max14577_charger.c
 F:	drivers/power/supply/max77693_charger.c
 
-MAXIM MAX77802 MULTIFUNCTION PMIC DEVICE DRIVERS
-M:	Javier Martinez Canillas <javier@osg.samsung.com>
+MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
+M:	Javier Martinez Canillas <javier@dowhile0.org>
 L:	linux-kernel@vger.kernel.org
 S:	Supported
-F:	drivers/*/*max77802*.c
+F:	drivers/regulator/max77802-regulator.c
 F:	Documentation/devicetree/bindings/*/*max77802.txt
 F:	include/dt-bindings/*/*max77802.h
 
diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c
index 11cab1582f2f..8263605f6d2f 100644
--- a/drivers/mfd/tps65910.c
+++ b/drivers/mfd/tps65910.c
@@ -328,11 +328,7 @@ static int tps65910_sleepinit(struct tps65910 *tps65910,
 		goto err_sleep_init;
 	}
 
-	/* Return if there is no sleep keepon data. */
-	if (!pmic_pdata->slp_keepon)
-		return 0;
-
-	if (pmic_pdata->slp_keepon->therm_keepon) {
+	if (pmic_pdata->slp_keepon.therm_keepon) {
 		ret = tps65910_reg_set_bits(tps65910,
 				TPS65910_SLEEP_KEEP_RES_ON,
 				SLEEP_KEEP_RES_ON_THERM_KEEPON_MASK);
@@ -342,7 +338,7 @@ static int tps65910_sleepinit(struct tps65910 *tps65910,
 		}
 	}
 
-	if (pmic_pdata->slp_keepon->clkout32k_keepon) {
+	if (pmic_pdata->slp_keepon.clkout32k_keepon) {
 		ret = tps65910_reg_set_bits(tps65910,
 				TPS65910_SLEEP_KEEP_RES_ON,
 				SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_MASK);
@@ -352,7 +348,7 @@ static int tps65910_sleepinit(struct tps65910 *tps65910,
 		}
 	}
 
-	if (pmic_pdata->slp_keepon->i2chs_keepon) {
+	if (pmic_pdata->slp_keepon.i2chs_keepon) {
 		ret = tps65910_reg_set_bits(tps65910,
 				TPS65910_SLEEP_KEEP_RES_ON,
 				SLEEP_KEEP_RES_ON_I2CHS_KEEPON_MASK);
@@ -415,6 +411,18 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
 	prop = of_property_read_bool(np, "ti,en-ck32k-xtal");
 	board_info->en_ck32k_xtal = prop;
 
+	prop = of_property_read_bool(np, "ti,sleep-enable");
+	board_info->en_dev_slp = prop;
+
+	prop = of_property_read_bool(np, "ti,sleep-keep-therm");
+	board_info->slp_keepon.therm_keepon = prop;
+
+	prop = of_property_read_bool(np, "ti,sleep-keep-ck32k");
+	board_info->slp_keepon.clkout32k_keepon = prop;
+
+	prop = of_property_read_bool(np, "ti,sleep-keep-hsclk");
+	board_info->slp_keepon.i2chs_keepon = prop;
+
 	board_info->irq = client->irq;
 	board_info->irq_base = -1;
 	board_info->pm_off = of_property_read_bool(np,
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 48db87d6dfef..99b9362331b5 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -214,11 +214,11 @@ config REGULATOR_DA9055
 	  will be called da9055-regulator.
 
 config REGULATOR_DA9062
-	tristate "Dialog Semiconductor DA9062 regulators"
+	tristate "Dialog Semiconductor DA9061/62 regulators"
 	depends on MFD_DA9062
 	help
 	  Say y here to support the BUCKs and LDOs regulators found on
-	  DA9062 PMICs.
+	  DA9061 and DA9062 PMICs.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called da9062-regulator.
@@ -296,6 +296,16 @@ config REGULATOR_HI6421
 	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
 	  of them come with support to either ECO (idle) or sleep mode.
 
+config REGULATOR_HI6421V530
+	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
+	depends on MFD_HI6421_PMIC && OF
+	help
+	  This driver provides support for the voltage regulators on
+	  HiSilicon Hi6421v530 PMU / Codec IC.
+	  Hi6421v530 is a multi-function device which, on regulator part,
+	  provides 5 general purpose LDOs, and all of them come with support
+	  to either ECO (idle) or sleep mode.
+
 config REGULATOR_HI655X
 	tristate "Hisilicon HI655X PMIC regulators support"
 	depends on ARCH_HISI || COMPILE_TEST
@@ -365,6 +375,14 @@ config REGULATOR_LP8755
 	  chip contains six step-down DC/DC converters which can support
 	  9 mode multiphase configuration.
 
+config REGULATOR_LP87565
+	tristate "TI LP87565 Power regulators"
+	depends on MFD_TI_LP87565 && OF
+	help
+	  This driver supports LP87565 voltage regulator chips. LP87565
+	  provides four step-down converters. It supports software based
+	  voltage control for different voltage domains
+
 config REGULATOR_LP8788
 	tristate "TI LP8788 Power Regulators"
 	depends on MFD_LP8788
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index dc3503fb3e30..95b1e86ae692 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
 obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
 obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
 obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
@@ -46,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
 obj-$(CONFIG_REGULATOR_LP873X) += lp873x-regulator.o
+obj-$(CONFIG_REGULATOR_LP87565) += lp87565-regulator.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 0b9d4e3e52c7..e2608fe770b9 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -244,6 +244,82 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
 	.ops		= &axp20x_ops_sw,
 };
 
+static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
+	REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc5_ranges[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0x0, 0x20, 10000),
+	REGULATOR_LINEAR_RANGE(1140000, 0x21, 0x44, 20000),
+};
+
+static const struct regulator_linear_range axp803_dcdc6_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
+	REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
+};
+
+/* AXP806's CLDO2 and AXP809's DLDO1 shares the same range */
+static const struct regulator_linear_range axp803_dldo2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp803_regulators[] = {
+	AXP_DESC(AXP803, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC_RANGES(AXP803, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
+			76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(1)),
+	AXP_DESC_RANGES(AXP803, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
+			76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(2)),
+	AXP_DESC_RANGES(AXP803, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
+			76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(3)),
+	AXP_DESC_RANGES(AXP803, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
+			68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(4)),
+	AXP_DESC_RANGES(AXP803, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
+			72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(5)),
+	/* secondary switchable output of DCDC1 */
+	AXP_DESC_SW(AXP803, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+		    BIT(7)),
+	AXP_DESC(AXP803, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+	AXP_DESC(AXP803, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+	AXP_DESC(AXP803, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+	AXP_DESC(AXP803, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+	AXP_DESC_RANGES(AXP803, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
+			32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+			BIT(4)),
+	AXP_DESC(AXP803, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC(AXP803, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
+	AXP_DESC(AXP803, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP803, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP803, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC(AXP803, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
+		 AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
+	AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
+		 AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
+	AXP_DESC_IO(AXP803, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP803, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000),
+};
+
 static const struct regulator_linear_range axp806_dcdca_ranges[] = {
 	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x32, 10000),
 	REGULATOR_LINEAR_RANGE(1120000, 0x33, 0x47, 20000),
@@ -254,11 +330,6 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
 	REGULATOR_LINEAR_RANGE(1600000, 0x2e, 0x3f, 100000),
 };
 
-static const struct regulator_linear_range axp806_cldo2_ranges[] = {
-	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
-	REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
-};
-
 static const struct regulator_desc axp806_regulators[] = {
 	AXP_DESC_RANGES(AXP806, DCDCA, "dcdca", "vina", axp806_dcdca_ranges,
 			72, AXP806_DCDCA_V_CTRL, 0x7f, AXP806_PWR_OUT_CTRL1,
@@ -289,7 +360,7 @@ static const struct regulator_desc axp806_regulators[] = {
 		 AXP806_BLDO4_V_CTRL, 0x0f, AXP806_PWR_OUT_CTRL2, BIT(3)),
 	AXP_DESC(AXP806, CLDO1, "cldo1", "cldoin", 700, 3300, 100,
 		 AXP806_CLDO1_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2, BIT(4)),
-	AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp806_cldo2_ranges,
+	AXP_DESC_RANGES(AXP806, CLDO2, "cldo2", "cldoin", axp803_dldo2_ranges,
 			32, AXP806_CLDO2_V_CTRL, 0x1f, AXP806_PWR_OUT_CTRL2,
 			BIT(5)),
 	AXP_DESC(AXP806, CLDO3, "cldo3", "cldoin", 700, 3300, 100,
@@ -326,7 +397,7 @@ static const struct regulator_desc axp809_regulators[] = {
 		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
 	AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
 		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
-	AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp806_cldo2_ranges,
+	AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp803_dldo2_ranges,
 			32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
 			BIT(3)),
 	AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
@@ -369,14 +440,21 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		def = 1500;
 		step = 75;
 		break;
-	case AXP806_ID:
+	case AXP803_ID:
 		/*
-		 * AXP806 DCDC work frequency setting has the same range and
+		 * AXP803 DCDC work frequency setting has the same range and
 		 * step as AXP22X, but at a different register.
 		 * Fall through to the check below.
 		 * (See include/linux/mfd/axp20x.h)
 		 */
-		reg = AXP806_DCDC_FREQ_CTRL;
+		reg = AXP803_DCDC_FREQ_CTRL;
+	case AXP806_ID:
+		/*
+		 * AXP806 also have DCDC work frequency setting register at a
+		 * different position.
+		 */
+		if (axp20x->variant == AXP806_ID)
+			reg = AXP806_DCDC_FREQ_CTRL;
 	case AXP221_ID:
 	case AXP223_ID:
 	case AXP809_ID:
@@ -475,6 +553,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 		workmode <<= id - AXP22X_DCDC1;
 		break;
 
+	case AXP803_ID:
+		if (id < AXP803_DCDC1 || id > AXP803_DCDC6)
+			return -EINVAL;
+
+		mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP803_DCDC1);
+		workmode <<= id - AXP803_DCDC1;
+		break;
+
 	default:
 		/* should not happen */
 		WARN_ON(1);
@@ -492,20 +578,38 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
 {
 	u32 reg = 0;
 
-	/* Only AXP806 has poly-phase outputs */
-	if (axp20x->variant != AXP806_ID)
+	/*
+	 * Currently in our supported AXP variants, only AXP803 and AXP806
+	 * have polyphase regulators.
+	 */
+	switch (axp20x->variant) {
+	case AXP803_ID:
+		regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, &reg);
+
+		switch (id) {
+		case AXP803_DCDC3:
+			return !!(reg & BIT(6));
+		case AXP803_DCDC6:
+			return !!(reg & BIT(7));
+		}
+		break;
+
+	case AXP806_ID:
+		regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, &reg);
+
+		switch (id) {
+		case AXP806_DCDCB:
+			return (((reg & GENMASK(7, 6)) == BIT(6)) ||
+				((reg & GENMASK(7, 6)) == BIT(7)));
+		case AXP806_DCDCC:
+			return ((reg & GENMASK(7, 6)) == BIT(7));
+		case AXP806_DCDCE:
+			return !!(reg & BIT(5));
+		}
+		break;
+
+	default:
 		return false;
-
-	regmap_read(axp20x->regmap, AXP806_DCDC_MODE_CTRL2, &reg);
-
-	switch (id) {
-	case AXP806_DCDCB:
-		return (((reg & GENMASK(7, 6)) == BIT(6)) ||
-			((reg & GENMASK(7, 6)) == BIT(7)));
-	case AXP806_DCDCC:
-		return ((reg & GENMASK(7, 6)) == BIT(7));
-	case AXP806_DCDCE:
-		return !!(reg & BIT(5));
 	}
 
 	return false;
@@ -540,6 +644,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
 						  "x-powers,drive-vbus-en");
 		break;
+	case AXP803_ID:
+		regulators = axp803_regulators;
+		nregulators = AXP803_REG_ID_MAX;
+		break;
 	case AXP806_ID:
 		regulators = axp806_regulators;
 		nregulators = AXP806_REG_ID_MAX;
@@ -579,6 +687,7 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		 * name.
 		 */
 		if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
+		    (regulators == axp803_regulators && i == AXP803_DC1SW) ||
 		    (regulators == axp809_regulators && i == AXP809_DC1SW)) {
 			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
 						GFP_KERNEL);
diff --git a/drivers/regulator/bd9571mwv-regulator.c b/drivers/regulator/bd9571mwv-regulator.c
index 8ba206fec31e..c67a83d53c4c 100644
--- a/drivers/regulator/bd9571mwv-regulator.c
+++ b/drivers/regulator/bd9571mwv-regulator.c
@@ -43,7 +43,7 @@ enum bd9571mwv_regulators { VD09, VD18, VD25, VD33, DVFS };
 		.linear_min_sel		= _lmin,		\
 	}
 
-int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
+static int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
 {
 	unsigned int val;
 	int ret;
@@ -55,8 +55,8 @@ int bd9571mwv_avs_get_moni_state(struct regulator_dev *rdev)
 	return val & BD9571MWV_AVS_SET_MONI_MASK;
 }
 
-int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
-					 unsigned int sel)
+static int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
+						unsigned int sel)
 {
 	int ret;
 
@@ -68,7 +68,7 @@ int bd9571mwv_avs_set_voltage_sel_regmap(struct regulator_dev *rdev,
 				 rdev->desc->vsel_mask, sel);
 }
 
-int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
+static int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
 {
 	unsigned int val;
 	int ret;
@@ -87,8 +87,8 @@ int bd9571mwv_avs_get_voltage_sel_regmap(struct regulator_dev *rdev)
 	return val;
 }
 
-int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
-					 unsigned int sel)
+static int bd9571mwv_reg_set_voltage_sel_regmap(struct regulator_dev *rdev,
+						unsigned int sel)
 {
 	return regmap_write_bits(rdev->regmap, BD9571MWV_DVFS_SETVID,
 				 rdev->desc->vsel_mask, sel);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c0d9ae8d0860..e567fa54980b 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1462,7 +1462,7 @@ static struct regulator_dev *regulator_lookup_by_name(const char *name)
 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 						  const char *supply)
 {
-	struct regulator_dev *r;
+	struct regulator_dev *r = NULL;
 	struct device_node *node;
 	struct regulator_map *map;
 	const char *devname = NULL;
@@ -1489,10 +1489,6 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 	if (dev)
 		devname = dev_name(dev);
 
-	r = regulator_lookup_by_name(supply);
-	if (r)
-		return r;
-
 	mutex_lock(&regulator_list_mutex);
 	list_for_each_entry(map, &regulator_map_list, list) {
 		/* If the mapping has a device set up it must match */
@@ -1508,6 +1504,10 @@ static struct regulator_dev *regulator_dev_lookup(struct device *dev,
 	}
 	mutex_unlock(&regulator_list_mutex);
 
+	if (r)
+		return r;
+
+	r = regulator_lookup_by_name(supply);
 	if (r)
 		return r;
 
@@ -2767,6 +2767,12 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev,
 		ramp_delay = rdev->desc->ramp_delay;
 	else if (rdev->constraints->settling_time)
 		return rdev->constraints->settling_time;
+	else if (rdev->constraints->settling_time_up &&
+		 (new_uV > old_uV))
+		return rdev->constraints->settling_time_up;
+	else if (rdev->constraints->settling_time_down &&
+		 (new_uV < old_uV))
+		return rdev->constraints->settling_time_down;
 
 	if (ramp_delay == 0) {
 		rdev_dbg(rdev, "ramp_delay not set\n");
@@ -2938,7 +2944,8 @@ static int regulator_set_voltage_unlocked(struct regulator *regulator,
 	if (rdev->supply &&
 	    regulator_ops_is_valid(rdev->supply->rdev,
 				   REGULATOR_CHANGE_VOLTAGE) &&
-	    (rdev->desc->min_dropout_uV || !rdev->desc->ops->get_voltage)) {
+	    (rdev->desc->min_dropout_uV || !(rdev->desc->ops->get_voltage ||
+					   rdev->desc->ops->get_voltage_sel))) {
 		int current_supply_uV;
 		int selector;
 
@@ -4311,41 +4318,31 @@ void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
 EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
 
 #ifdef CONFIG_DEBUG_FS
-static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
-				    size_t count, loff_t *ppos)
+static int supply_map_show(struct seq_file *sf, void *data)
 {
-	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	ssize_t len, ret = 0;
 	struct regulator_map *map;
 
-	if (!buf)
-		return -ENOMEM;
-
 	list_for_each_entry(map, &regulator_map_list, list) {
-		len = snprintf(buf + ret, PAGE_SIZE - ret,
-			       "%s -> %s.%s\n",
-			       rdev_get_name(map->regulator), map->dev_name,
-			       map->supply);
-		if (len >= 0)
-			ret += len;
-		if (ret > PAGE_SIZE) {
-			ret = PAGE_SIZE;
-			break;
-		}
+		seq_printf(sf, "%s -> %s.%s\n",
+				rdev_get_name(map->regulator), map->dev_name,
+				map->supply);
 	}
 
-	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+	return 0;
+}
 
-	kfree(buf);
-
-	return ret;
+static int supply_map_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, supply_map_show, inode->i_private);
 }
 #endif
 
 static const struct file_operations supply_map_fops = {
 #ifdef CONFIG_DEBUG_FS
-	.read = supply_map_read_file,
-	.llseek = default_llseek,
+	.open = supply_map_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
 #endif
 };
 
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index 0638c8b40521..34a70d9dc450 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c
@@ -1,6 +1,6 @@
 /*
- * da9062-regulator.c - REGULATOR device driver for DA9062
- * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ * Regulator device driver for DA9061 and DA9062.
+ * Copyright (C) 2015-2017  Dialog Semiconductor
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -27,6 +27,17 @@
 #include <linux/mfd/da9062/registers.h>
 
 /* Regulator IDs */
+enum {
+	DA9061_ID_BUCK1,
+	DA9061_ID_BUCK2,
+	DA9061_ID_BUCK3,
+	DA9061_ID_LDO1,
+	DA9061_ID_LDO2,
+	DA9061_ID_LDO3,
+	DA9061_ID_LDO4,
+	DA9061_MAX_REGULATORS,
+};
+
 enum {
 	DA9062_ID_BUCK1,
 	DA9062_ID_BUCK2,
@@ -88,15 +99,21 @@ enum {
 
 /* Regulator operations */
 
-/* Current limits array (in uA) BUCK1 and BUCK3.
-   Entry indexes corresponds to register values. */
+/* Current limits array (in uA)
+ * - DA9061_ID_[BUCK1|BUCK3]
+ * - DA9062_ID_[BUCK1|BUCK2|BUCK4]
+ * Entry indexes corresponds to register values.
+ */
 static const int da9062_buck_a_limits[] = {
 	 500000,  600000,  700000,  800000,  900000, 1000000, 1100000, 1200000,
 	1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
 };
 
-/* Current limits array (in uA) for BUCK2.
-   Entry indexes corresponds to register values. */
+/* Current limits array (in uA)
+ * - DA9061_ID_BUCK2
+ * - DA9062_ID_BUCK3
+ * Entry indexes corresponds to register values.
+ */
 static const int da9062_buck_b_limits[] = {
 	1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
 	2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
@@ -405,8 +422,254 @@ static const struct regulator_ops da9062_ldo_ops = {
 	.set_suspend_mode	= da9062_ldo_set_suspend_mode,
 };
 
-/* Regulator information */
-static const struct da9062_regulator_info local_regulator_info[] = {
+/* DA9061 Regulator information */
+static const struct da9062_regulator_info local_da9061_regulator_info[] = {
+	{
+		.desc.id = DA9061_ID_BUCK1,
+		.desc.name = "DA9061 BUCK1",
+		.desc.of_match = of_match_ptr("buck1"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (300) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1570) - (300))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK1_CONT,
+		.desc.enable_mask = DA9062AA_BUCK1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK1_A,
+		.desc.vsel_mask = DA9062AA_VBUCK1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK1_A,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B,
+			__builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK1_B,
+		.mode = REG_FIELD(DA9062AA_BUCK1_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C,
+			__builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9061_ID_BUCK2,
+		.desc.name = "DA9061 BUCK2",
+		.desc.of_match = of_match_ptr("buck2"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (800) * 1000,
+		.desc.uV_step = (20) * 1000,
+		.desc.n_voltages = ((3340) - (800))/(20) + 1,
+		.current_limits = da9062_buck_b_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_b_limits),
+		.desc.enable_reg = DA9062AA_BUCK3_CONT,
+		.desc.enable_mask = DA9062AA_BUCK3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK3_A,
+		.desc.vsel_mask = DA9062AA_VBUCK3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK3_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B,
+			__builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK3_B,
+		.mode = REG_FIELD(DA9062AA_BUCK3_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A,
+			__builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9061_ID_BUCK3,
+		.desc.name = "DA9061 BUCK3",
+		.desc.of_match = of_match_ptr("buck3"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_buck_ops,
+		.desc.min_uV = (530) * 1000,
+		.desc.uV_step = (10) * 1000,
+		.desc.n_voltages = ((1800) - (530))/(10) + 1,
+		.current_limits = da9062_buck_a_limits,
+		.n_current_limits = ARRAY_SIZE(da9062_buck_a_limits),
+		.desc.enable_reg = DA9062AA_BUCK4_CONT,
+		.desc.enable_mask = DA9062AA_BUCK4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VBUCK4_A,
+		.desc.vsel_mask = DA9062AA_VBUCK4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VBUCK4_A,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VBUCK4_B,
+		.mode = REG_FIELD(DA9062AA_BUCK4_CFG,
+			__builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1),
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1),
+		.ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B,
+			__builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9061_ID_LDO1,
+		.desc.name = "DA9061 LDO1",
+		.desc.of_match = of_match_ptr("ldo1"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO1_CONT,
+		.desc.enable_mask = DA9062AA_LDO1_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO1_A,
+		.desc.vsel_mask = DA9062AA_VLDO1_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO1_A,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B,
+			__builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO1_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9061_ID_LDO2,
+		.desc.name = "DA9061 LDO2",
+		.desc.of_match = of_match_ptr("ldo2"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (600))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO2_CONT,
+		.desc.enable_mask = DA9062AA_LDO2_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO2_A,
+		.desc.vsel_mask = DA9062AA_VLDO2_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO2_A,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B,
+			__builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO2_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9061_ID_LDO3,
+		.desc.name = "DA9061 LDO3",
+		.desc.of_match = of_match_ptr("ldo3"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO3_CONT,
+		.desc.enable_mask = DA9062AA_LDO3_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO3_A,
+		.desc.vsel_mask = DA9062AA_VLDO3_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO3_A,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B,
+			__builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO3_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1),
+	},
+	{
+		.desc.id = DA9061_ID_LDO4,
+		.desc.name = "DA9061 LDO4",
+		.desc.of_match = of_match_ptr("ldo4"),
+		.desc.regulators_node = of_match_ptr("regulators"),
+		.desc.ops = &da9062_ldo_ops,
+		.desc.min_uV = (900) * 1000,
+		.desc.uV_step = (50) * 1000,
+		.desc.n_voltages = ((3600) - (900))/(50) + 1,
+		.desc.enable_reg = DA9062AA_LDO4_CONT,
+		.desc.enable_mask = DA9062AA_LDO4_EN_MASK,
+		.desc.vsel_reg = DA9062AA_VLDO4_A,
+		.desc.vsel_mask = DA9062AA_VLDO4_A_MASK,
+		.desc.linear_min_sel = 0,
+		.sleep = REG_FIELD(DA9062AA_VLDO4_A,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1),
+		.suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B,
+			__builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1),
+		.suspend_vsel_reg = DA9062AA_VLDO4_B,
+		.suspend = REG_FIELD(DA9062AA_DVC_1,
+			__builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1),
+		.oc_event = REG_FIELD(DA9062AA_STATUS_D,
+			__builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1,
+			sizeof(unsigned int) * 8 -
+			__builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1),
+	},
+};
+
+/* DA9062 Regulator information */
+static const struct da9062_regulator_info local_da9062_regulator_info[] = {
 	{
 		.desc.id = DA9062_ID_BUCK1,
 		.desc.name = "DA9062 BUCK1",
@@ -727,17 +990,33 @@ static int da9062_regulator_probe(struct platform_device *pdev)
 	struct da9062_regulators *regulators;
 	struct da9062_regulator *regl;
 	struct regulator_config config = { };
+	const struct da9062_regulator_info *rinfo;
 	int irq, n, ret;
 	size_t size;
+	int max_regulators;
+
+	switch (chip->chip_type) {
+	case COMPAT_TYPE_DA9061:
+		max_regulators = DA9061_MAX_REGULATORS;
+		rinfo = local_da9061_regulator_info;
+		break;
+	case COMPAT_TYPE_DA9062:
+		max_regulators = DA9062_MAX_REGULATORS;
+		rinfo = local_da9062_regulator_info;
+		break;
+	default:
+		dev_err(chip->dev, "Unrecognised chip type\n");
+		return -ENODEV;
+	}
 
 	/* Allocate memory required by usable regulators */
 	size = sizeof(struct da9062_regulators) +
-		DA9062_MAX_REGULATORS * sizeof(struct da9062_regulator);
+		max_regulators * sizeof(struct da9062_regulator);
 	regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
 	if (!regulators)
 		return -ENOMEM;
 
-	regulators->n_regulators = DA9062_MAX_REGULATORS;
+	regulators->n_regulators = max_regulators;
 	platform_set_drvdata(pdev, regulators);
 
 	n = 0;
@@ -745,7 +1024,7 @@ static int da9062_regulator_probe(struct platform_device *pdev)
 		/* Initialise regulator structure */
 		regl = &regulators->regulator[n];
 		regl->hw = chip;
-		regl->info = &local_regulator_info[n];
+		regl->info = &rinfo[n];
 		regl->desc = regl->info->desc;
 		regl->desc.type = REGULATOR_VOLTAGE;
 		regl->desc.owner = THIS_MODULE;
@@ -836,6 +1115,6 @@ module_exit(da9062_regulator_cleanup);
 
 /* Module information */
 MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
-MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062");
+MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062 and DA9061");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:da9062-regulators");
diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index 62c5f5445d44..259c3a865ac6 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -621,7 +621,14 @@ static int hi6421_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct platform_device_id hi6421_regulator_table[] = {
+	{ .name = "hi6421-regulator" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, hi6421_regulator_table);
+
 static struct platform_driver hi6421_regulator_driver = {
+	.id_table = hi6421_regulator_table,
 	.driver = {
 		.name	= "hi6421-regulator",
 	},
diff --git a/drivers/regulator/hi6421v530-regulator.c b/drivers/regulator/hi6421v530-regulator.c
new file mode 100644
index 000000000000..c09bc71538a5
--- /dev/null
+++ b/drivers/regulator/hi6421v530-regulator.c
@@ -0,0 +1,214 @@
+/*
+ * Device driver for regulators in Hi6421V530 IC
+ *
+ * Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
+ *              http://www.hisilicon.com
+ * Copyright (c) <2017> Linaro Ltd.
+ *              http://www.linaro.org
+ *
+ * Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
+ *         Guodong Xu <guodong.xu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/hi6421-pmic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+/*
+ * struct hi6421v530_regulator_info - hi6421v530 regulator information
+ * @desc: regulator description
+ * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
+ * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
+ */
+struct hi6421v530_regulator_info {
+	struct regulator_desc rdesc;
+	u8 mode_mask;
+	u32 eco_microamp;
+};
+
+/* HI6421v530 regulators */
+enum hi6421v530_regulator_id {
+	HI6421V530_LDO3,
+	HI6421V530_LDO9,
+	HI6421V530_LDO11,
+	HI6421V530_LDO15,
+	HI6421V530_LDO16,
+};
+
+static const unsigned int ldo_3_voltages[] = {
+	1800000, 1825000, 1850000, 1875000,
+	1900000, 1925000, 1950000, 1975000,
+	2000000, 2025000, 2050000, 2075000,
+	2100000, 2125000, 2150000, 2200000,
+};
+
+static const unsigned int ldo_9_11_voltages[] = {
+	1750000, 1800000, 1825000, 2800000,
+	2850000, 2950000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_15_16_voltages[] = {
+	1750000, 1800000, 2400000, 2600000,
+	2700000, 2850000, 2950000, 3000000,
+};
+
+static const struct regulator_ops hi6421v530_ldo_ops;
+
+#define HI6421V530_LDO_ENABLE_TIME (350)
+
+/*
+ * _id - LDO id name string
+ * v_table - voltage table
+ * vreg - voltage select register
+ * vmask - voltage select mask
+ * ereg - enable register
+ * emask - enable mask
+ * odelay - off/on delay time in uS
+ * ecomask - eco mode mask
+ * ecoamp - eco mode load uppler limit in uA
+ */
+#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask,		\
+		   odelay, ecomask, ecoamp) {				\
+	.rdesc = {							\
+		.name		 = #_ID,				\
+		.of_match        = of_match_ptr(#_ID),			\
+		.regulators_node = of_match_ptr("regulators"),		\
+		.ops		 = &hi6421v530_ldo_ops,			\
+		.type		 = REGULATOR_VOLTAGE,			\
+		.id		 = HI6421V530_##_ID,			\
+		.owner		 = THIS_MODULE,				\
+		.n_voltages	 = ARRAY_SIZE(v_table),			\
+		.volt_table	 = v_table,				\
+		.vsel_reg	 = HI6421_REG_TO_BUS_ADDR(vreg),	\
+		.vsel_mask	 = vmask,				\
+		.enable_reg	 = HI6421_REG_TO_BUS_ADDR(ereg),	\
+		.enable_mask	 = emask,				\
+		.enable_time	 = HI6421V530_LDO_ENABLE_TIME,		\
+		.off_on_delay	 = odelay,				\
+	},								\
+	.mode_mask	= ecomask,					\
+	.eco_microamp	= ecoamp,					\
+}
+
+/* HI6421V530 regulator information */
+
+static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = {
+	HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2,
+		   20000, 0x6, 8000),
+	HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2,
+		   40000, 0x6, 8000),
+	HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2,
+		   40000, 0x6, 8000),
+	HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2,
+		   40000, 0x6, 8000),
+	HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2,
+		   40000, 0x6, 8000),
+};
+
+static unsigned int hi6421v530_regulator_ldo_get_mode(
+					struct regulator_dev *rdev)
+{
+	struct hi6421v530_regulator_info *info;
+	unsigned int reg_val;
+
+	info = rdev_get_drvdata(rdev);
+	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
+
+	if (reg_val & (info->mode_mask))
+		return REGULATOR_MODE_IDLE;
+
+	return REGULATOR_MODE_NORMAL;
+}
+
+static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev,
+						unsigned int mode)
+{
+	struct hi6421v530_regulator_info *info;
+	unsigned int new_mode;
+
+	info = rdev_get_drvdata(rdev);
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		new_mode = 0;
+		break;
+	case REGULATOR_MODE_IDLE:
+		new_mode = info->mode_mask;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+			   info->mode_mask, new_mode);
+
+	return 0;
+}
+
+
+static const struct regulator_ops hi6421v530_ldo_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_ascend,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_mode = hi6421v530_regulator_ldo_get_mode,
+	.set_mode = hi6421v530_regulator_ldo_set_mode,
+};
+
+static int hi6421v530_regulator_probe(struct platform_device *pdev)
+{
+	struct hi6421_pmic *pmic;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	unsigned int i;
+
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	if (!pmic) {
+		dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) {
+		config.dev = pdev->dev.parent;
+		config.regmap = pmic->regmap;
+		config.driver_data = &hi6421v530_regulator_info[i];
+
+		rdev = devm_regulator_register(&pdev->dev,
+				&hi6421v530_regulator_info[i].rdesc,
+				&config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				hi6421v530_regulator_info[i].rdesc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id hi6421v530_regulator_table[] = {
+	{ .name = "hi6421v530-regulator" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, hi6421v530_regulator_table);
+
+static struct platform_driver hi6421v530_regulator_driver = {
+	.id_table = hi6421v530_regulator_table,
+	.driver = {
+		.name	= "hi6421v530-regulator",
+	},
+	.probe	= hi6421v530_regulator_probe,
+};
+module_platform_driver(hi6421v530_regulator_driver);
+
+MODULE_AUTHOR("Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>");
+MODULE_DESCRIPTION("Hi6421v530 regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
index db34e1da75ef..244822bb63cd 100644
--- a/drivers/regulator/lp8755.c
+++ b/drivers/regulator/lp8755.c
@@ -99,7 +99,7 @@ static int lp8755_buck_enable_time(struct regulator_dev *rdev)
 
 	ret = lp8755_read(pchip, 0x12 + id, &regval);
 	if (ret < 0) {
-		dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+		dev_err(pchip->dev, "i2c access error %s\n", __func__);
 		return ret;
 	}
 	return (regval & 0xff) * 100;
@@ -144,7 +144,7 @@ static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
 		goto err_i2c;
 	return ret;
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -175,7 +175,7 @@ static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev)
 	return REGULATOR_MODE_NORMAL;
 
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return 0;
 }
 
@@ -223,7 +223,7 @@ static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp)
 		goto err_i2c;
 	return ret;
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -295,7 +295,7 @@ static int lp8755_init_data(struct lp8755_chip *pchip)
 	return ret;
 
 out_i2c_error:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return ret;
 }
 
@@ -404,7 +404,7 @@ static irqreturn_t lp8755_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 
 err_i2c:
-	dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+	dev_err(pchip->dev, "i2c access error %s\n", __func__);
 	return IRQ_NONE;
 }
 
@@ -420,7 +420,7 @@ static int lp8755_int_config(struct lp8755_chip *pchip)
 
 	ret = lp8755_read(pchip, 0x0F, &regval);
 	if (ret < 0) {
-		dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+		dev_err(pchip->dev, "i2c access error %s\n", __func__);
 		return ret;
 	}
 
diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c
new file mode 100644
index 000000000000..cfdbe294fb6a
--- /dev/null
+++ b/drivers/regulator/lp87565-regulator.c
@@ -0,0 +1,236 @@
+/*
+ * Regulator driver for LP87565 PMIC
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation version 2. 
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp87565.h>
+
+#define LP87565_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
+			 _delay, _lr, _cr)				\
+	[_id] = {							\
+		.desc = {						\
+			.name			= _name,		\
+			.supply_name		= _of "-in",		\
+			.id			= _id,			\
+			.of_match		= of_match_ptr(_of),	\
+			.regulators_node	= of_match_ptr("regulators"),\
+			.ops			= &_ops,		\
+			.n_voltages		= _n,			\
+			.type			= REGULATOR_VOLTAGE,	\
+			.owner			= THIS_MODULE,		\
+			.vsel_reg		= _vr,			\
+			.vsel_mask		= _vm,			\
+			.enable_reg		= _er,			\
+			.enable_mask		= _em,			\
+			.ramp_delay		= _delay,		\
+			.linear_ranges		= _lr,			\
+			.n_linear_ranges	= ARRAY_SIZE(_lr),	\
+		},							\
+		.ctrl2_reg = _cr,					\
+	}
+
+struct lp87565_regulator {
+	struct regulator_desc desc;
+	unsigned int ctrl2_reg;
+};
+
+static const struct lp87565_regulator regulators[];
+
+static const struct regulator_linear_range buck0_1_2_3_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0xA, 0x17, 10000),
+	REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
+	REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
+};
+
+static unsigned int lp87565_buck_ramp_delay[] = {
+	30000, 15000, 10000, 7500, 3800, 1900, 940, 470
+};
+
+/* LP87565 BUCK current limit */
+static const unsigned int lp87565_buck_uA[] = {
+	1500000, 2000000, 2500000, 3000000, 3500000, 4000000, 4500000, 5000000,
+};
+
+static int lp87565_buck_set_ramp_delay(struct regulator_dev *rdev,
+				       int ramp_delay)
+{
+	int id = rdev_get_id(rdev);
+	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
+	unsigned int reg;
+	int ret;
+
+	if (ramp_delay <= 470)
+		reg = 7;
+	else if (ramp_delay <= 940)
+		reg = 6;
+	else if (ramp_delay <= 1900)
+		reg = 5;
+	else if (ramp_delay <= 3800)
+		reg = 4;
+	else if (ramp_delay <= 7500)
+		reg = 3;
+	else if (ramp_delay <= 10000)
+		reg = 2;
+	else if (ramp_delay <= 15000)
+		reg = 1;
+	else
+		reg = 0;
+
+	ret = regmap_update_bits(lp87565->regmap, regulators[id].ctrl2_reg,
+				 LP87565_BUCK_CTRL_2_SLEW_RATE,
+				 reg << __ffs(LP87565_BUCK_CTRL_2_SLEW_RATE));
+	if (ret) {
+		dev_err(lp87565->dev, "SLEW RATE write failed: %d\n", ret);
+		return ret;
+	}
+
+	rdev->constraints->ramp_delay = lp87565_buck_ramp_delay[reg];
+
+	return 0;
+}
+
+static int lp87565_buck_set_current_limit(struct regulator_dev *rdev,
+					  int min_uA, int max_uA)
+{
+	int id = rdev_get_id(rdev);
+	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
+	int i;
+
+	for (i = ARRAY_SIZE(lp87565_buck_uA) - 1; i >= 0; i--) {
+		if (lp87565_buck_uA[i] >= min_uA &&
+		    lp87565_buck_uA[i] <= max_uA)
+			return regmap_update_bits(lp87565->regmap,
+						  regulators[id].ctrl2_reg,
+						  LP87565_BUCK_CTRL_2_ILIM,
+						  i << __ffs(LP87565_BUCK_CTRL_2_ILIM));
+	}
+
+	return -EINVAL;
+}
+
+static int lp87565_buck_get_current_limit(struct regulator_dev *rdev)
+{
+	int id = rdev_get_id(rdev);
+	struct lp87565 *lp87565 = rdev_get_drvdata(rdev);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(lp87565->regmap, regulators[id].ctrl2_reg, &val);
+	if (ret)
+		return ret;
+
+	val = (val & LP87565_BUCK_CTRL_2_ILIM) >>
+	       __ffs(LP87565_BUCK_CTRL_2_ILIM);
+
+	return (val < ARRAY_SIZE(lp87565_buck_uA)) ?
+			lp87565_buck_uA[val] : -EINVAL;
+}
+
+/* Operations permitted on BUCK0, BUCK1 */
+static struct regulator_ops lp87565_buck_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_ramp_delay		= lp87565_buck_set_ramp_delay,
+	.set_current_limit	= lp87565_buck_set_current_limit,
+	.get_current_limit	= lp87565_buck_get_current_limit,
+};
+
+static const struct lp87565_regulator regulators[] = {
+	LP87565_REGULATOR("BUCK0", LP87565_BUCK_0, "buck0", lp87565_buck_ops,
+			  256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
+			  LP87565_REG_BUCK0_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN, 3800,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
+	LP87565_REGULATOR("BUCK1", LP87565_BUCK_1, "buck1", lp87565_buck_ops,
+			  256, LP87565_REG_BUCK1_VOUT, LP87565_BUCK_VSET,
+			  LP87565_REG_BUCK1_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN, 3800,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK1_CTRL_2),
+	LP87565_REGULATOR("BUCK2", LP87565_BUCK_2, "buck2", lp87565_buck_ops,
+			  256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
+			  LP87565_REG_BUCK2_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN, 3800,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
+	LP87565_REGULATOR("BUCK3", LP87565_BUCK_3, "buck3", lp87565_buck_ops,
+			  256, LP87565_REG_BUCK3_VOUT, LP87565_BUCK_VSET,
+			  LP87565_REG_BUCK3_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN, 3800,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK3_CTRL_2),
+	LP87565_REGULATOR("BUCK10", LP87565_BUCK_10, "buck10", lp87565_buck_ops,
+			  256, LP87565_REG_BUCK0_VOUT, LP87565_BUCK_VSET,
+			  LP87565_REG_BUCK0_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN, 3800,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK0_CTRL_2),
+	LP87565_REGULATOR("BUCK23", LP87565_BUCK_23, "buck23", lp87565_buck_ops,
+			  256, LP87565_REG_BUCK2_VOUT, LP87565_BUCK_VSET,
+			  LP87565_REG_BUCK2_CTRL_1,
+			  LP87565_BUCK_CTRL_1_EN, 3800,
+			  buck0_1_2_3_ranges, LP87565_REG_BUCK2_CTRL_2),
+};
+
+static int lp87565_regulator_probe(struct platform_device *pdev)
+{
+	struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	int i, min_idx = LP87565_BUCK_1, max_idx = LP87565_BUCK_3;
+
+	platform_set_drvdata(pdev, lp87565);
+
+	config.dev = &pdev->dev;
+	config.dev->of_node = lp87565->dev->of_node;
+	config.driver_data = lp87565;
+	config.regmap = lp87565->regmap;
+
+	if (lp87565->dev_type == LP87565_DEVICE_TYPE_LP87565_Q1) {
+		min_idx = LP87565_BUCK_10;
+		max_idx = LP87565_BUCK_23;
+	}
+
+	for (i = min_idx; i <= max_idx; i++) {
+		rdev = devm_regulator_register(&pdev->dev, &regulators[i].desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(lp87565->dev, "failed to register %s regulator\n",
+				pdev->name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id lp87565_regulator_id_table[] = {
+	{ "lp87565-regulator", },
+	{ "lp87565-q1-regulator", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp87565_regulator_id_table);
+
+static struct platform_driver lp87565_regulator_driver = {
+	.driver = {
+		.name = "lp87565-pmic",
+	},
+	.probe = lp87565_regulator_probe,
+	.id_table = lp87565_regulator_id_table,
+};
+module_platform_driver(lp87565_regulator_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP87565 voltage regulator driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
index efabc0ea0e96..559b9ac45404 100644
--- a/drivers/regulator/max8997-regulator.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -428,12 +428,9 @@ static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
 	if (max_uV < 4000000 || min_uV > 4350000)
 		return -EINVAL;
 
-	if (min_uV <= 4000000) {
-		if (max_uV >= 4000000)
-			return -EINVAL;
-		else
-			val = 0x1;
-	} else if (min_uV <= 4200000 && max_uV >= 4200000)
+	if (min_uV <= 4000000)
+		val = 0x1;
+	else if (min_uV <= 4200000 && max_uV >= 4200000)
 		val = 0x0;
 	else {
 		lb = (min_uV - 4000001) / 20000 + 2;
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 09d677d5d3f0..96bf75458da5 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -90,6 +90,25 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!ret)
 		constraints->settling_time = pval;
 
+	ret = of_property_read_u32(np, "regulator-settling-time-up-us", &pval);
+	if (!ret)
+		constraints->settling_time_up = pval;
+	if (constraints->settling_time_up && constraints->settling_time) {
+		pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",
+			np->name);
+		constraints->settling_time_up = 0;
+	}
+
+	ret = of_property_read_u32(np, "regulator-settling-time-down-us",
+				   &pval);
+	if (!ret)
+		constraints->settling_time_down = pval;
+	if (constraints->settling_time_down && constraints->settling_time) {
+		pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",
+			np->name);
+		constraints->settling_time_down = 0;
+	}
+
 	ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
 	if (!ret)
 		constraints->enable_time = pval;
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 31ae5ee3a80d..bb5ab7d78895 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -263,6 +263,13 @@ static struct palmas_regs_info tps65917_regs_info[] = {
 		.ctrl_addr	= TPS65917_SMPS5_CTRL,
 		.sleep_id	= TPS65917_EXTERNAL_REQSTR_ID_SMPS5,
 	},
+	{
+		.name		= "SMPS12",
+		.sname		= "smps1-in",
+		.vsel_addr	= TPS65917_SMPS1_VOLTAGE,
+		.ctrl_addr	= TPS65917_SMPS1_CTRL,
+		.sleep_id	= TPS65917_EXTERNAL_REQSTR_ID_SMPS12,
+	},
 	{
 		.name		= "LDO1",
 		.sname		= "ldo1-in",
@@ -367,6 +374,7 @@ static struct palmas_sleep_requestor_info tps65917_sleep_req_info[] = {
 	EXTERNAL_REQUESTOR_TPS65917(SMPS3, 1, 2),
 	EXTERNAL_REQUESTOR_TPS65917(SMPS4, 1, 3),
 	EXTERNAL_REQUESTOR_TPS65917(SMPS5, 1, 4),
+	EXTERNAL_REQUESTOR_TPS65917(SMPS12, 1, 5),
 	EXTERNAL_REQUESTOR_TPS65917(LDO1, 2, 0),
 	EXTERNAL_REQUESTOR_TPS65917(LDO2, 2, 1),
 	EXTERNAL_REQUESTOR_TPS65917(LDO3, 2, 2),
@@ -1305,7 +1313,8 @@ static int tps65917_smps_registration(struct palmas_pmic *pmic,
 		 */
 		desc = &pmic->desc[id];
 		desc->n_linear_ranges = 3;
-		if ((id == TPS65917_REG_SMPS2) && pmic->smps12)
+		if ((id == TPS65917_REG_SMPS2 || id == TPS65917_REG_SMPS1) &&
+		    pmic->smps12)
 			continue;
 
 		/* Initialise sleep/init values from platform data */
@@ -1427,6 +1436,7 @@ static struct of_regulator_match tps65917_matches[] = {
 	{ .name = "smps3", },
 	{ .name = "smps4", },
 	{ .name = "smps5", },
+	{ .name = "smps12",},
 	{ .name = "ldo1", },
 	{ .name = "ldo2", },
 	{ .name = "ldo3", },
@@ -1455,7 +1465,7 @@ static struct palmas_pmic_driver_data palmas_ddata = {
 
 static struct palmas_pmic_driver_data tps65917_ddata = {
 	.smps_start = TPS65917_REG_SMPS1,
-	.smps_end = TPS65917_REG_SMPS5,
+	.smps_end = TPS65917_REG_SMPS12,
 	.ldo_begin = TPS65917_REG_LDO1,
 	.ldo_end = TPS65917_REG_LDO5,
 	.max_reg = TPS65917_NUM_REGS,
@@ -1491,7 +1501,7 @@ static int palmas_dt_to_pdata(struct device *dev,
 	}
 
 	for (idx = 0; idx < ddata->max_reg; idx++) {
-		static struct of_regulator_match *match;
+		struct of_regulator_match *match;
 		struct palmas_reg_init *rinit;
 		struct device_node *np;
 
@@ -1643,8 +1653,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN)
+	if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN) {
 		pmic->smps123 = 1;
+		pmic->smps12 = 1;
+	}
 
 	if (reg & PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN)
 		pmic->smps457 = 1;
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 696116ebdf50..81672a58fcc2 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1107,6 +1107,7 @@ static int tps65910_probe(struct platform_device *pdev)
 
 	switch (tps65910_chip_id(tps65910)) {
 	case TPS65910:
+		BUILD_BUG_ON(TPS65910_NUM_REGS < ARRAY_SIZE(tps65910_regs));
 		pmic->get_ctrl_reg = &tps65910_get_ctrl_register;
 		pmic->num_regulators = ARRAY_SIZE(tps65910_regs);
 		pmic->ext_sleep_control = tps65910_ext_sleep_control;
@@ -1119,6 +1120,7 @@ static int tps65910_probe(struct platform_device *pdev)
 					DCDCCTRL_DCDCCKSYNC_MASK);
 		break;
 	case TPS65911:
+		BUILD_BUG_ON(TPS65910_NUM_REGS < ARRAY_SIZE(tps65911_regs));
 		pmic->get_ctrl_reg = &tps65911_get_ctrl_register;
 		pmic->num_regulators = ARRAY_SIZE(tps65911_regs);
 		pmic->ext_sleep_control = tps65911_ext_sleep_control;
@@ -1144,8 +1146,7 @@ static int tps65910_probe(struct platform_device *pdev)
 	if (!pmic->rdev)
 		return -ENOMEM;
 
-	for (i = 0; i < pmic->num_regulators && i < TPS65910_NUM_REGS;
-			i++, info++) {
+	for (i = 0; i < pmic->num_regulators; i++, info++) {
 		/* Register the regulators */
 		pmic->info[i] = info;
 
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index cde56cfe8446..965b027e31b3 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -119,6 +119,17 @@ enum axp20x_variants {
 #define AXP806_BUS_ADDR_EXT		0xfe
 #define AXP806_REG_ADDR_EXT		0xff
 
+#define AXP803_POLYPHASE_CTRL		0x14
+#define AXP803_FLDO1_V_OUT		0x1c
+#define AXP803_FLDO2_V_OUT		0x1d
+#define AXP803_DCDC1_V_OUT		0x20
+#define AXP803_DCDC2_V_OUT		0x21
+#define AXP803_DCDC3_V_OUT		0x22
+#define AXP803_DCDC4_V_OUT		0x23
+#define AXP803_DCDC5_V_OUT		0x24
+#define AXP803_DCDC6_V_OUT		0x25
+#define AXP803_DCDC_FREQ_CTRL		0x3b
+
 /* Interrupt */
 #define AXP152_IRQ1_EN			0x40
 #define AXP152_IRQ2_EN			0x41
@@ -350,6 +361,32 @@ enum {
 	AXP809_REG_ID_MAX,
 };
 
+enum {
+	AXP803_DCDC1 = 0,
+	AXP803_DCDC2,
+	AXP803_DCDC3,
+	AXP803_DCDC4,
+	AXP803_DCDC5,
+	AXP803_DCDC6,
+	AXP803_DC1SW,
+	AXP803_ALDO1,
+	AXP803_ALDO2,
+	AXP803_ALDO3,
+	AXP803_DLDO1,
+	AXP803_DLDO2,
+	AXP803_DLDO3,
+	AXP803_DLDO4,
+	AXP803_ELDO1,
+	AXP803_ELDO2,
+	AXP803_ELDO3,
+	AXP803_FLDO1,
+	AXP803_FLDO2,
+	AXP803_RTC_LDO,
+	AXP803_LDO_IO0,
+	AXP803_LDO_IO1,
+	AXP803_REG_ID_MAX,
+};
+
 /* IRQs */
 enum {
 	AXP152_IRQ_LDO0IN_CONNECT = 1,
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 5c9a1d44c125..6dec43826303 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -250,6 +250,7 @@ enum tps65917_regulators {
 	TPS65917_REG_SMPS3,
 	TPS65917_REG_SMPS4,
 	TPS65917_REG_SMPS5,
+	TPS65917_REG_SMPS12,
 	/* LDO regulators */
 	TPS65917_REG_LDO1,
 	TPS65917_REG_LDO2,
@@ -317,6 +318,7 @@ enum tps65917_external_requestor_id {
 	TPS65917_EXTERNAL_REQSTR_ID_SMPS3,
 	TPS65917_EXTERNAL_REQSTR_ID_SMPS4,
 	TPS65917_EXTERNAL_REQSTR_ID_SMPS5,
+	TPS65917_EXTERNAL_REQSTR_ID_SMPS12,
 	TPS65917_EXTERNAL_REQSTR_ID_LDO1,
 	TPS65917_EXTERNAL_REQSTR_ID_LDO2,
 	TPS65917_EXTERNAL_REQSTR_ID_LDO3,
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index ffb21e79204d..deffdcd0236f 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -879,7 +879,7 @@ struct tps65910_board {
 	bool en_ck32k_xtal;
 	bool en_dev_slp;
 	bool pm_off;
-	struct tps65910_sleep_keepon_data *slp_keepon;
+	struct tps65910_sleep_keepon_data slp_keepon;
 	bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
 	unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
 	struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index 117699d1f7df..9cd4fef37203 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -110,6 +110,10 @@ struct regulator_state {
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @settling_time: Time to settle down after voltage change when voltage
  *		   change is non-linear (unit: microseconds).
+ * @settling_time_up: Time to settle down after voltage increase when voltage
+ *		      change is non-linear (unit: microseconds).
+ * @settling_time_down : Time to settle down after voltage decrease when
+ *			 voltage change is non-linear (unit: microseconds).
  * @active_discharge: Enable/disable active discharge. The enum
  *		      regulator_active_discharge values are used for
  *		      initialisation.
@@ -152,6 +156,8 @@ struct regulation_constraints {
 
 	unsigned int ramp_delay;
 	unsigned int settling_time;
+	unsigned int settling_time_up;
+	unsigned int settling_time_down;
 	unsigned int enable_time;
 
 	unsigned int active_discharge;