diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index ceddcff4082a..e638e15a8895 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -1,3 +1,46 @@ +What: /sys/bus/pci/drivers/.../bind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause + the driver to attempt to bind to the device found at + this location. This is useful for overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../unbind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause the + driver to attempt to unbind from the device found at + this location. This may be useful when overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../new_id +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device ID to this file will attempt to + dynamically add a new device ID to a PCI device driver. + This may allow the driver to support more hardware than + was included in the driver's static device ID support + table at compile time. The format for the device ID is: + VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID, + Device ID, Subsystem Vendor ID, Subsystem Device ID, + Class, Class Mask, and Private Driver Data. The Vendor ID + and Device ID fields are required, the rest are optional. + Upon successfully adding an ID, the driver will probe + for the device and attempt to bind to it. For example: + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + What: /sys/bus/pci/devices/.../vpd Date: February 2008 Contact: Ben Hutchings diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index dc3154e49279..1462ed86d40a 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -6,7 +6,7 @@ # To add a new book the only step required is to add the book to the # list of DOCBOOKS. -DOCBOOKS := z8530book.xml mcabook.xml \ +DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ procfs-guide.xml writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl new file mode 100644 index 000000000000..94a20fe8fedf --- /dev/null +++ b/Documentation/DocBook/device-drivers.tmpl @@ -0,0 +1,418 @@ + + + + + + Linux Device Drivers + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Driver Basics + Driver Entry and Exit points +!Iinclude/linux/init.h + + + Atomic and pointer manipulation +!Iarch/x86/include/asm/atomic_32.h +!Iarch/x86/include/asm/unaligned.h + + + Delaying, scheduling, and timer routines +!Iinclude/linux/sched.h +!Ekernel/sched.c +!Ekernel/timer.c + + High-resolution timers +!Iinclude/linux/ktime.h +!Iinclude/linux/hrtimer.h +!Ekernel/hrtimer.c + + Workqueues and Kevents +!Ekernel/workqueue.c + + Internal Functions +!Ikernel/exit.c +!Ikernel/signal.c +!Iinclude/linux/kthread.h +!Ekernel/kthread.c + + + Kernel objects manipulation + +!Elib/kobject.c + + + Kernel utility functions +!Iinclude/linux/kernel.h +!Ekernel/printk.c +!Ekernel/panic.c +!Ekernel/sys.c +!Ekernel/rcupdate.c + + + Device Resource Management +!Edrivers/base/devres.c + + + + + + Device drivers infrastructure + Device Drivers Base + +!Edrivers/base/driver.c +!Edrivers/base/core.c +!Edrivers/base/class.c +!Edrivers/base/firmware_class.c +!Edrivers/base/transport_class.c + +!Edrivers/base/sys.c + +!Edrivers/base/platform.c +!Edrivers/base/bus.c + + Device Drivers Power Management +!Edrivers/base/power/main.c + + Device Drivers ACPI Support + +!Edrivers/acpi/scan.c +!Idrivers/acpi/scan.c + + + Device drivers PnP support +!Idrivers/pnp/core.c + +!Edrivers/pnp/card.c +!Idrivers/pnp/driver.c +!Edrivers/pnp/manager.c +!Edrivers/pnp/support.c + + Userspace IO devices +!Edrivers/uio/uio.c +!Iinclude/linux/uio_driver.h + + + + + Parallel Port Devices +!Iinclude/linux/parport.h +!Edrivers/parport/ieee1284.c +!Edrivers/parport/share.c +!Idrivers/parport/daisy.c + + + + Message-based devices + Fusion message devices +!Edrivers/message/fusion/mptbase.c +!Idrivers/message/fusion/mptbase.c +!Edrivers/message/fusion/mptscsih.c +!Idrivers/message/fusion/mptscsih.c +!Idrivers/message/fusion/mptctl.c +!Idrivers/message/fusion/mptspi.c +!Idrivers/message/fusion/mptfc.c +!Idrivers/message/fusion/mptlan.c + + I2O message devices +!Iinclude/linux/i2o.h +!Idrivers/message/i2o/core.h +!Edrivers/message/i2o/iop.c +!Idrivers/message/i2o/iop.c +!Idrivers/message/i2o/config-osm.c +!Edrivers/message/i2o/exec-osm.c +!Idrivers/message/i2o/exec-osm.c +!Idrivers/message/i2o/bus-osm.c +!Edrivers/message/i2o/device.c +!Idrivers/message/i2o/device.c +!Idrivers/message/i2o/driver.c +!Idrivers/message/i2o/pci.c +!Idrivers/message/i2o/i2o_block.c +!Idrivers/message/i2o/i2o_scsi.c +!Idrivers/message/i2o/i2o_proc.c + + + + + Sound Devices +!Iinclude/sound/core.h +!Esound/sound_core.c +!Iinclude/sound/pcm.h +!Esound/core/pcm.c +!Esound/core/device.c +!Esound/core/info.c +!Esound/core/rawmidi.c +!Esound/core/sound.c +!Esound/core/memory.c +!Esound/core/pcm_memory.c +!Esound/core/init.c +!Esound/core/isadma.c +!Esound/core/control.c +!Esound/core/pcm_lib.c +!Esound/core/hwdep.c +!Esound/core/pcm_native.c +!Esound/core/memalloc.c + + + + + 16x50 UART Driver +!Iinclude/linux/serial_core.h +!Edrivers/serial/serial_core.c +!Edrivers/serial/8250.c + + + + Frame Buffer Library + + + The frame buffer drivers depend heavily on four data structures. + These structures are declared in include/linux/fb.h. They are + fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. + The last three can be made available to and from userland. + + + + fb_info defines the current state of a particular video card. + Inside fb_info, there exists a fb_ops structure which is a + collection of needed functions to make fbdev and fbcon work. + fb_info is only visible to the kernel. + + + + fb_var_screeninfo is used to describe the features of a video card + that are user defined. With fb_var_screeninfo, things such as + depth and the resolution may be defined. + + + + The next structure is fb_fix_screeninfo. This defines the + properties of a card that are created when a mode is set and can't + be changed otherwise. A good example of this is the start of the + frame buffer memory. This "locks" the address of the frame buffer + memory, so that it cannot be changed or moved. + + + + The last structure is fb_monospecs. In the old API, there was + little importance for fb_monospecs. This allowed for forbidden things + such as setting a mode of 800x600 on a fix frequency monitor. With + the new API, fb_monospecs prevents such things, and if used + correctly, can prevent a monitor from being cooked. fb_monospecs + will not be useful until kernels 2.5.x. + + + Frame Buffer Memory +!Edrivers/video/fbmem.c + + + Frame Buffer Colormap +!Edrivers/video/fbcmap.c + + + Frame Buffer Video Mode Database +!Idrivers/video/modedb.c +!Edrivers/video/modedb.c + + Frame Buffer Macintosh Video Mode Database +!Edrivers/video/macmodes.c + + Frame Buffer Fonts + + Refer to the file drivers/video/console/fonts.c for more information. + + + + + + + Input Subsystem +!Iinclude/linux/input.h +!Edrivers/input/input.c +!Edrivers/input/ff-core.c +!Edrivers/input/ff-memless.c + + + + Serial Peripheral Interface (SPI) + + SPI is the "Serial Peripheral Interface", widely used with + embedded systems because it is a simple and efficient + interface: basically a multiplexed shift register. + Its three signal wires hold a clock (SCK, often in the range + of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and + a "Master In, Slave Out" (MISO) data line. + SPI is a full duplex protocol; for each bit shifted out the + MOSI line (one per clock) another is shifted in on the MISO line. + Those bits are assembled into words of various sizes on the + way to and from system memory. + An additional chipselect line is usually active-low (nCS); + four signals are normally used for each peripheral, plus + sometimes an interrupt. + + + The SPI bus facilities listed here provide a generalized + interface to declare SPI busses and devices, manage them + according to the standard Linux driver model, and perform + input/output operations. + At this time, only "master" side interfaces are supported, + where Linux talks to SPI peripherals and does not implement + such a peripheral itself. + (Interfaces to support implementing SPI slaves would + necessarily look different.) + + + The programming interface is structured around two kinds of driver, + and two kinds of device. + A "Controller Driver" abstracts the controller hardware, which may + be as simple as a set of GPIO pins or as complex as a pair of FIFOs + connected to dual DMA engines on the other side of the SPI shift + register (maximizing throughput). Such drivers bridge between + whatever bus they sit on (often the platform bus) and SPI, and + expose the SPI side of their device as a + struct spi_master. + SPI devices are children of that master, represented as a + struct spi_device and manufactured from + struct spi_board_info descriptors which + are usually provided by board-specific initialization code. + A struct spi_driver is called a + "Protocol Driver", and is bound to a spi_device using normal + driver model calls. + + + The I/O model is a set of queued messages. Protocol drivers + submit one or more struct spi_message + objects, which are processed and completed asynchronously. + (There are synchronous wrappers, however.) Messages are + built from one or more struct spi_transfer + objects, each of which wraps a full duplex SPI transfer. + A variety of protocol tweaking options are needed, because + different chips adopt very different policies for how they + use the bits transferred with SPI. + +!Iinclude/linux/spi/spi.h +!Fdrivers/spi/spi.c spi_register_board_info +!Edrivers/spi/spi.c + + + + I<superscript>2</superscript>C and SMBus Subsystem + + + I2C (or without fancy typography, "I2C") + is an acronym for the "Inter-IC" bus, a simple bus protocol which is + widely used where low data rate communications suffice. + Since it's also a licensed trademark, some vendors use another + name (such as "Two-Wire Interface", TWI) for the same bus. + I2C only needs two signals (SCL for clock, SDA for data), conserving + board real estate and minimizing signal quality issues. + Most I2C devices use seven bit addresses, and bus speeds of up + to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet + found wide use. + I2C is a multi-master bus; open drain signaling is used to + arbitrate between masters, as well as to handshake and to + synchronize clocks from slower clients. + + + + The Linux I2C programming interfaces support only the master + side of bus interactions, not the slave side. + The programming interface is structured around two kinds of driver, + and two kinds of device. + An I2C "Adapter Driver" abstracts the controller hardware; it binds + to a physical device (perhaps a PCI device or platform_device) and + exposes a struct i2c_adapter representing + each I2C bus segment it manages. + On each I2C bus segment will be I2C devices represented by a + struct i2c_client. Those devices will + be bound to a struct i2c_driver, + which should follow the standard Linux driver model. + (At this writing, a legacy model is more widely used.) + There are functions to perform various I2C protocol operations; at + this writing all such functions are usable only from task context. + + + + The System Management Bus (SMBus) is a sibling protocol. Most SMBus + systems are also I2C conformant. The electrical constraints are + tighter for SMBus, and it standardizes particular protocol messages + and idioms. Controllers that support I2C can also support most + SMBus operations, but SMBus controllers don't support all the protocol + options that an I2C controller will. + There are functions to perform various SMBus protocol operations, + either using I2C primitives or by issuing SMBus commands to + i2c_adapter devices which don't support those I2C operations. + + +!Iinclude/linux/i2c.h +!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info +!Edrivers/i2c/i2c-core.c + + + diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 5818ff75786a..bc962cda6504 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -38,58 +38,6 @@ - - Driver Basics - Driver Entry and Exit points -!Iinclude/linux/init.h - - - Atomic and pointer manipulation -!Iarch/x86/include/asm/atomic_32.h -!Iarch/x86/include/asm/unaligned.h - - - Delaying, scheduling, and timer routines -!Iinclude/linux/sched.h -!Ekernel/sched.c -!Ekernel/timer.c - - High-resolution timers -!Iinclude/linux/ktime.h -!Iinclude/linux/hrtimer.h -!Ekernel/hrtimer.c - - Workqueues and Kevents -!Ekernel/workqueue.c - - Internal Functions -!Ikernel/exit.c -!Ikernel/signal.c -!Iinclude/linux/kthread.h -!Ekernel/kthread.c - - - Kernel objects manipulation - -!Elib/kobject.c - - - Kernel utility functions -!Iinclude/linux/kernel.h -!Ekernel/printk.c -!Ekernel/panic.c -!Ekernel/sys.c -!Ekernel/rcupdate.c - - - Device Resource Management -!Edrivers/base/devres.c - - - - Data Types Doubly Linked Lists @@ -298,62 +246,6 @@ X!Earch/x86/kernel/mca_32.c !Ikernel/acct.c - - Device drivers infrastructure - Device Drivers Base - -!Edrivers/base/driver.c -!Edrivers/base/core.c -!Edrivers/base/class.c -!Edrivers/base/firmware_class.c -!Edrivers/base/transport_class.c - -!Edrivers/base/sys.c - -!Edrivers/base/platform.c -!Edrivers/base/bus.c - - Device Drivers Power Management -!Edrivers/base/power/main.c - - Device Drivers ACPI Support - -!Edrivers/acpi/scan.c -!Idrivers/acpi/scan.c - - - Device drivers PnP support -!Idrivers/pnp/core.c - -!Edrivers/pnp/card.c -!Idrivers/pnp/driver.c -!Edrivers/pnp/manager.c -!Edrivers/pnp/support.c - - Userspace IO devices -!Edrivers/uio/uio.c -!Iinclude/linux/uio_driver.h - - - Block Devices !Eblock/blk-core.c @@ -381,275 +273,6 @@ X!Edrivers/pnp/system.c !Edrivers/char/misc.c - - Parallel Port Devices -!Iinclude/linux/parport.h -!Edrivers/parport/ieee1284.c -!Edrivers/parport/share.c -!Idrivers/parport/daisy.c - - - - Message-based devices - Fusion message devices -!Edrivers/message/fusion/mptbase.c -!Idrivers/message/fusion/mptbase.c -!Edrivers/message/fusion/mptscsih.c -!Idrivers/message/fusion/mptscsih.c -!Idrivers/message/fusion/mptctl.c -!Idrivers/message/fusion/mptspi.c -!Idrivers/message/fusion/mptfc.c -!Idrivers/message/fusion/mptlan.c - - I2O message devices -!Iinclude/linux/i2o.h -!Idrivers/message/i2o/core.h -!Edrivers/message/i2o/iop.c -!Idrivers/message/i2o/iop.c -!Idrivers/message/i2o/config-osm.c -!Edrivers/message/i2o/exec-osm.c -!Idrivers/message/i2o/exec-osm.c -!Idrivers/message/i2o/bus-osm.c -!Edrivers/message/i2o/device.c -!Idrivers/message/i2o/device.c -!Idrivers/message/i2o/driver.c -!Idrivers/message/i2o/pci.c -!Idrivers/message/i2o/i2o_block.c -!Idrivers/message/i2o/i2o_scsi.c -!Idrivers/message/i2o/i2o_proc.c - - - - - Sound Devices -!Iinclude/sound/core.h -!Esound/sound_core.c -!Iinclude/sound/pcm.h -!Esound/core/pcm.c -!Esound/core/device.c -!Esound/core/info.c -!Esound/core/rawmidi.c -!Esound/core/sound.c -!Esound/core/memory.c -!Esound/core/pcm_memory.c -!Esound/core/init.c -!Esound/core/isadma.c -!Esound/core/control.c -!Esound/core/pcm_lib.c -!Esound/core/hwdep.c -!Esound/core/pcm_native.c -!Esound/core/memalloc.c - - - - - 16x50 UART Driver -!Iinclude/linux/serial_core.h -!Edrivers/serial/serial_core.c -!Edrivers/serial/8250.c - - - - Frame Buffer Library - - - The frame buffer drivers depend heavily on four data structures. - These structures are declared in include/linux/fb.h. They are - fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. - The last three can be made available to and from userland. - - - - fb_info defines the current state of a particular video card. - Inside fb_info, there exists a fb_ops structure which is a - collection of needed functions to make fbdev and fbcon work. - fb_info is only visible to the kernel. - - - - fb_var_screeninfo is used to describe the features of a video card - that are user defined. With fb_var_screeninfo, things such as - depth and the resolution may be defined. - - - - The next structure is fb_fix_screeninfo. This defines the - properties of a card that are created when a mode is set and can't - be changed otherwise. A good example of this is the start of the - frame buffer memory. This "locks" the address of the frame buffer - memory, so that it cannot be changed or moved. - - - - The last structure is fb_monospecs. In the old API, there was - little importance for fb_monospecs. This allowed for forbidden things - such as setting a mode of 800x600 on a fix frequency monitor. With - the new API, fb_monospecs prevents such things, and if used - correctly, can prevent a monitor from being cooked. fb_monospecs - will not be useful until kernels 2.5.x. - - - Frame Buffer Memory -!Edrivers/video/fbmem.c - - - Frame Buffer Colormap -!Edrivers/video/fbcmap.c - - - Frame Buffer Video Mode Database -!Idrivers/video/modedb.c -!Edrivers/video/modedb.c - - Frame Buffer Macintosh Video Mode Database -!Edrivers/video/macmodes.c - - Frame Buffer Fonts - - Refer to the file drivers/video/console/fonts.c for more information. - - - - - - - Input Subsystem -!Iinclude/linux/input.h -!Edrivers/input/input.c -!Edrivers/input/ff-core.c -!Edrivers/input/ff-memless.c - - - - Serial Peripheral Interface (SPI) - - SPI is the "Serial Peripheral Interface", widely used with - embedded systems because it is a simple and efficient - interface: basically a multiplexed shift register. - Its three signal wires hold a clock (SCK, often in the range - of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and - a "Master In, Slave Out" (MISO) data line. - SPI is a full duplex protocol; for each bit shifted out the - MOSI line (one per clock) another is shifted in on the MISO line. - Those bits are assembled into words of various sizes on the - way to and from system memory. - An additional chipselect line is usually active-low (nCS); - four signals are normally used for each peripheral, plus - sometimes an interrupt. - - - The SPI bus facilities listed here provide a generalized - interface to declare SPI busses and devices, manage them - according to the standard Linux driver model, and perform - input/output operations. - At this time, only "master" side interfaces are supported, - where Linux talks to SPI peripherals and does not implement - such a peripheral itself. - (Interfaces to support implementing SPI slaves would - necessarily look different.) - - - The programming interface is structured around two kinds of driver, - and two kinds of device. - A "Controller Driver" abstracts the controller hardware, which may - be as simple as a set of GPIO pins or as complex as a pair of FIFOs - connected to dual DMA engines on the other side of the SPI shift - register (maximizing throughput). Such drivers bridge between - whatever bus they sit on (often the platform bus) and SPI, and - expose the SPI side of their device as a - struct spi_master. - SPI devices are children of that master, represented as a - struct spi_device and manufactured from - struct spi_board_info descriptors which - are usually provided by board-specific initialization code. - A struct spi_driver is called a - "Protocol Driver", and is bound to a spi_device using normal - driver model calls. - - - The I/O model is a set of queued messages. Protocol drivers - submit one or more struct spi_message - objects, which are processed and completed asynchronously. - (There are synchronous wrappers, however.) Messages are - built from one or more struct spi_transfer - objects, each of which wraps a full duplex SPI transfer. - A variety of protocol tweaking options are needed, because - different chips adopt very different policies for how they - use the bits transferred with SPI. - -!Iinclude/linux/spi/spi.h -!Fdrivers/spi/spi.c spi_register_board_info -!Edrivers/spi/spi.c - - - - I<superscript>2</superscript>C and SMBus Subsystem - - - I2C (or without fancy typography, "I2C") - is an acronym for the "Inter-IC" bus, a simple bus protocol which is - widely used where low data rate communications suffice. - Since it's also a licensed trademark, some vendors use another - name (such as "Two-Wire Interface", TWI) for the same bus. - I2C only needs two signals (SCL for clock, SDA for data), conserving - board real estate and minimizing signal quality issues. - Most I2C devices use seven bit addresses, and bus speeds of up - to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet - found wide use. - I2C is a multi-master bus; open drain signaling is used to - arbitrate between masters, as well as to handshake and to - synchronize clocks from slower clients. - - - - The Linux I2C programming interfaces support only the master - side of bus interactions, not the slave side. - The programming interface is structured around two kinds of driver, - and two kinds of device. - An I2C "Adapter Driver" abstracts the controller hardware; it binds - to a physical device (perhaps a PCI device or platform_device) and - exposes a struct i2c_adapter representing - each I2C bus segment it manages. - On each I2C bus segment will be I2C devices represented by a - struct i2c_client. Those devices will - be bound to a struct i2c_driver, - which should follow the standard Linux driver model. - (At this writing, a legacy model is more widely used.) - There are functions to perform various I2C protocol operations; at - this writing all such functions are usable only from task context. - - - - The System Management Bus (SMBus) is a sibling protocol. Most SMBus - systems are also I2C conformant. The electrical constraints are - tighter for SMBus, and it standardizes particular protocol messages - and idioms. Controllers that support I2C can also support most - SMBus operations, but SMBus controllers don't support all the protocol - options that an I2C controller will. - There are functions to perform various SMBus protocol operations, - either using I2C primitives or by issuing SMBus commands to - i2c_adapter devices which don't support those I2C operations. - - -!Iinclude/linux/i2c.h -!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info -!Edrivers/i2c/i2c-core.c - - Clock Framework diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 5c86c258c791..0611e9528c7c 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -142,7 +142,7 @@ into the rest of the kernel, none in performance critical paths: - in fork and exit, to attach and detach a task from its cpuset. - in sched_setaffinity, to mask the requested CPUs by what's allowed in that tasks cpuset. - - in sched.c migrate_all_tasks(), to keep migrating tasks within + - in sched.c migrate_live_tasks(), to keep migrating tasks within the CPUs allowed by their cpuset, if possible. - in the mbind and set_mempolicy system calls, to mask the requested Memory Nodes by what's allowed in that tasks cpuset. @@ -175,6 +175,10 @@ files describing that cpuset: - mem_exclusive flag: is memory placement exclusive? - mem_hardwall flag: is memory allocation hardwalled - memory_pressure: measure of how much paging pressure in cpuset + - memory_spread_page flag: if set, spread page cache evenly on allowed nodes + - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes + - sched_load_balance flag: if set, load balance within CPUs on that cpuset + - sched_relax_domain_level: the searching range when migrating tasks In addition, the root cpuset only has the following file: - memory_pressure_enabled flag: compute memory_pressure? @@ -252,7 +256,7 @@ is causing. This is useful both on tightly managed systems running a wide mix of submitted jobs, which may choose to terminate or re-prioritize jobs that -are trying to use more memory than allowed on the nodes assigned them, +are trying to use more memory than allowed on the nodes assigned to them, and with tightly coupled, long running, massively parallel scientific computing jobs that will dramatically fail to meet required performance goals if they start to use more memory than allowed to them. @@ -378,7 +382,7 @@ as cpusets and sched_setaffinity. The algorithmic cost of load balancing and its impact on key shared kernel data structures such as the task list increases more than linearly with the number of CPUs being balanced. So the scheduler -has support to partition the systems CPUs into a number of sched +has support to partition the systems CPUs into a number of sched domains such that it only load balances within each sched domain. Each sched domain covers some subset of the CPUs in the system; no two sched domains overlap; some CPUs might not be in any sched @@ -485,17 +489,22 @@ of CPUs allowed to a cpuset having 'sched_load_balance' enabled. The internal kernel cpuset to scheduler interface passes from the cpuset code to the scheduler code a partition of the load balanced CPUs in the system. This partition is a set of subsets (represented -as an array of cpumask_t) of CPUs, pairwise disjoint, that cover all -the CPUs that must be load balanced. +as an array of struct cpumask) of CPUs, pairwise disjoint, that cover +all the CPUs that must be load balanced. -Whenever the 'sched_load_balance' flag changes, or CPUs come or go -from a cpuset with this flag enabled, or a cpuset with this flag -enabled is removed, the cpuset code builds a new such partition and -passes it to the scheduler sched domain setup code, to have the sched -domains rebuilt as necessary. +The cpuset code builds a new such partition and passes it to the +scheduler sched domain setup code, to have the sched domains rebuilt +as necessary, whenever: + - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes, + - or CPUs come or go from a cpuset with this flag enabled, + - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs + and with this flag enabled changes, + - or a cpuset with non-empty CPUs and with this flag enabled is removed, + - or a cpu is offlined/onlined. This partition exactly defines what sched domains the scheduler should -setup - one sched domain for each element (cpumask_t) in the partition. +setup - one sched domain for each element (struct cpumask) in the +partition. The scheduler remembers the currently active sched domain partitions. When the scheduler routine partition_sched_domains() is invoked from @@ -559,7 +568,7 @@ domain, the largest value among those is used. Be careful, if one requests 0 and others are -1 then 0 is used. Note that modifying this file will have both good and bad effects, -and whether it is acceptable or not will be depend on your situation. +and whether it is acceptable or not depends on your situation. Don't modify this file if you are not sure. If your situation is: @@ -600,19 +609,15 @@ to allocate a page of memory for that task. If a cpuset has its 'cpus' modified, then each task in that cpuset will have its allowed CPU placement changed immediately. Similarly, -if a tasks pid is written to a cpusets 'tasks' file, in either its -current cpuset or another cpuset, then its allowed CPU placement is -changed immediately. If such a task had been bound to some subset -of its cpuset using the sched_setaffinity() call, the task will be -allowed to run on any CPU allowed in its new cpuset, negating the -affect of the prior sched_setaffinity() call. +if a tasks pid is written to another cpusets 'tasks' file, then its +allowed CPU placement is changed immediately. If such a task had been +bound to some subset of its cpuset using the sched_setaffinity() call, +the task will be allowed to run on any CPU allowed in its new cpuset, +negating the effect of the prior sched_setaffinity() call. In summary, the memory placement of a task whose cpuset is changed is updated by the kernel, on the next allocation of a page for that task, -but the processor placement is not updated, until that tasks pid is -rewritten to the 'tasks' file of its cpuset. This is done to avoid -impacting the scheduler code in the kernel with a check for changes -in a tasks processor placement. +and the processor placement is updated immediately. Normally, once a page is allocated (given a physical page of main memory) then that page stays on whatever node it @@ -681,10 +686,14 @@ and then start a subshell 'sh' in that cpuset: # The next line should display '/Charlie' cat /proc/self/cpuset -In the future, a C library interface to cpusets will likely be -available. For now, the only way to query or modify cpusets is -via the cpuset file system, using the various cd, mkdir, echo, cat, -rmdir commands from the shell, or their equivalent from C. +There are ways to query or modify cpusets: + - via the cpuset file system directly, using the various cd, mkdir, echo, + cat, rmdir commands from the shell, or their equivalent from C. + - via the C library libcpuset. + - via the C library libcgroup. + (http://sourceforge.net/proects/libcg/) + - via the python application cset. + (http://developer.novell.com/wiki/index.php/Cpuset) The sched_setaffinity calls can also be done at the shell prompt using SGI's runon or Robert Love's taskset. The mbind and set_mempolicy @@ -756,7 +765,7 @@ mount -t cpuset X /dev/cpuset is equivalent to -mount -t cgroup -ocpuset X /dev/cpuset +mount -t cgroup -ocpuset,noprefix X /dev/cpuset echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent 2.2 Adding/removing cpus diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt index a05ec50f8004..a7cbfff40d07 100644 --- a/Documentation/driver-model/device.txt +++ b/Documentation/driver-model/device.txt @@ -127,9 +127,11 @@ void unlock_device(struct device * dev); Attributes ~~~~~~~~~~ struct device_attribute { - struct attribute attr; - ssize_t (*show)(struct device * dev, char * buf, size_t count, loff_t off); - ssize_t (*store)(struct device * dev, const char * buf, size_t count, loff_t off); + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); }; Attributes of devices can be exported via drivers using a simple diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop deleted file mode 100644 index 5515469de7cf..000000000000 --- a/Documentation/dvb/README.flexcop +++ /dev/null @@ -1,205 +0,0 @@ -This README escorted the skystar2-driver rewriting procedure. It describes the -state of the new flexcop-driver set and some internals are written down here -too. - -This document hopefully describes things about the flexcop and its -device-offsprings. Goal was to write an easy-to-write and easy-to-read set of -drivers based on the skystar2.c and other information. - -Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been -touched and rewritten. - -History & News -============== - 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana) - - - - -General coding processing -========================= - -We should proceed as follows (as long as no one complains): - -0) Think before start writing code! - -1) rewriting the skystar2.c with the help of the flexcop register descriptions -and splitting up the files to a pci-bus-part and a flexcop-part. -The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the -device-specific part and b2c2-flexcop.ko for the common flexcop-functions. - -2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c -and other pci drivers) - -3) make some beautification (see 'Improvements when rewriting (refactoring) is -done') - -4) Testing the new driver and maybe substitute the skystar2.c with it, to reach -a wider tester audience. - -5) creating an usb-bus-part using the already written flexcop code for the pci -card. - -Idea: create a kernel-object for the flexcop and export all important -functions. This option saves kernel-memory, but maybe a lot of functions have -to be exported to kernel namespace. - - -Current situation -================= - -0) Done :) -1) Done (some minor issues left) -2) Done -3) Not ready yet, more information is necessary -4) next to be done (see the table below) -5) USB driver is working (yes, there are some minor issues) - -What seems to be ready? ------------------------ - -1) Rewriting -1a) i2c is cut off from the flexcop-pci.c and seems to work -1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c -1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c -1e) eeprom (reading MAC address) -1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) -1f) misc. register accesses for reading parameters (e.g. resetting, revision) -1g) pid/mac filter (flexcop-hw-filter.c) -1i) dvb-stuff initialization in flexcop.c (done) -1h) dma stuff (now just using the size-irq, instead of all-together, to be done) -1j) remove flexcop initialization from flexcop-pci.c completely (done) -1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') -1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from -non-static where possible, moved code to proper places) - -2) Search for errors in the leftover of flexcop-pci.c (partially done) -5a) add MAC address reading -5c) feeding of ISOC data to the software demux (format of the isochronous data -and speed optimization, no real error) (thanks to Vadim Catana) - -What to do in the near future? --------------------------------------- -(no special order here) - -5) USB driver -5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) - -Testing changes ---------------- - -O = item is working -P = item is partially working -X = item is not working -N = item does not apply here - = item need to be examined - - | PCI | USB -item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 --------+-------+---------+---------+-------+-------+---------+---------+------- -1a) | O | | | | N | N | N | N -1b) | O | | | | | | O | -1c) | N | N | | | N | N | O | -1d) | O | O -1e) | O | O -1f) | P -1g) | O -1h) | P | -1i) | O | N -1j) | O | N -1l) | O | N -2) | O | N -5a) | N | O -5b)* | N | -5c) | N | O - -* - not done yet - -Known bugs and problems and TODO --------------------------------- - -1g/h/l) when pid filtering is enabled on the pci card - -DMA usage currently: - The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first - address and triggers an IRQ when it's full and starts writing to the second - address. When the second address is full, the IRQ is triggered again, and - the flexcop writes to first address again, and so on. - The buffersize of each address is currently 640*188 bytes. - - Problem is, when using hw-pid-filtering and doing some low-bandwidth - operation (like scanning) the buffers won't be filled enough to trigger - the IRQ. That's why: - - When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ - is triggered. Is the current write address of DMA1 different to the one - during the last IRQ, then the data is passed to the demuxer. - - There is an additional DMA-IRQ-method: packet count IRQ. This isn't - implemented correctly yet. - - The solution is to disable HW PID filtering, but I don't know how the DVB - API software demux behaves on slow systems with 45MBit/s TS. - -Solved bugs :) --------------- -1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't -working) -SOLUTION: also index 0 was affected, because net_translation is done for -these indexes by default - -5b) isochronous transfer does only work in the first attempt (for the Sky2PC -USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really -woke up again (don't know if this need fixes, see -flexcop-fe-tuner.c:flexcop_sleep) - -NEWS: when the driver is loaded and unloaded and loaded again (w/o doing -anything in the while the driver is loaded the first time), no transfers take -place anymore. - -Improvements when rewriting (refactoring) is done -================================================= - -- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control - (enable sleeping for other demods than dvb-s) -- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA) - -Debugging ---------- -- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it - with this flexcop, this is important, because i2c is now using the - flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for - that, please tell us so). - -Everything which is identical in the following table, can be put into a common -flexcop-module. - - PCI USB -------------------------------------------------------------------------------- -Different: -Register access: accessing IO memory USB control message -I2C bus: I2C bus of the FC USB control message -Data transfer: DMA isochronous transfer -EEPROM transfer: through i2c bus not clear yet - -Identical: -Streaming: accessing registers -PID Filtering: accessing registers -Sram destinations: accessing registers -Tuner/Demod: I2C bus -DVB-stuff: can be written for common use - -Acknowledgements (just for the rewriting part) -================ - -Bjarne Steinsbo thought a lot in the first place of the pci part for this code -sharing idea. - -Andreas Oberritter for providing a recent PCI initialization template -(pluto2.c). - -Boleslaw Ciesielski for pointing out a problem with firmware loader. - -Vadim Catana for correcting the USB transfer. - -comments, critics and ideas to linux-dvb@linuxtv.org. diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt index cdf6ee4b2da1..3f435ffb289c 100644 --- a/Documentation/dvb/technisat.txt +++ b/Documentation/dvb/technisat.txt @@ -1,5 +1,5 @@ -How to set up the Technisat devices -=================================== +How to set up the Technisat/B2C2 Flexcop devices +================================================ 1) Find out what device you have ================================ @@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)... If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: "Multimedia devices" => "Customise analog and hybrid tuner modules to build" -In this directory uncheck every driver which is activated there. +In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only). Then please activate: 2a) Main module part: a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" -b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR +b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card +OR c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" Notice: d.) is helpful for troubleshooting 2b) Frontend module part: -1.) Revision 2.3: +1.) SkyStar DVB-S Revision 2.3: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" -2.) Revision 2.6: +2.) SkyStar DVB-S Revision 2.6: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" -3.) Revision 2.7: +3.) SkyStar DVB-S Revision 2.7: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -4.) Revision 2.8: +4.) SkyStar DVB-S Revision 2.8: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -5.) DVB-T card: +5.) AirStar DVB-T card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" -6.) DVB-C card: +6.) CableStar DVB-C card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" -7.) ATSC card 1st generation: +7.) AirStar ATSC card 1st generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" -8.) ATSC card 2nd generation: +8.) AirStar ATSC card 2nd generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" -c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners" -Author: Uwe Bugla December 2008 +9.) AirStar ATSC card 3rd generation: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support" + +Author: Uwe Bugla February 2009 diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 9e9c348275a9..7e81e37c0b1e 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -2,8 +2,10 @@ sysfs - _The_ filesystem for exporting kernel objects. Patrick Mochel +Mike Murphy -10 January 2003 +Revised: 22 February 2009 +Original: 10 January 2003 What it is: @@ -64,12 +66,13 @@ An attribute definition is simply: struct attribute { char * name; + struct module *owner; mode_t mode; }; -int sysfs_create_file(struct kobject * kobj, struct attribute * attr); -void sysfs_remove_file(struct kobject * kobj, struct attribute * attr); +int sysfs_create_file(struct kobject * kobj, const struct attribute * attr); +void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr); A bare attribute contains no means to read or write the value of the @@ -80,9 +83,11 @@ a specific object type. For example, the driver model defines struct device_attribute like: struct device_attribute { - struct attribute attr; - ssize_t (*show)(struct device * dev, char * buf); - ssize_t (*store)(struct device * dev, const char * buf); + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); }; int device_create_file(struct device *, struct device_attribute *); @@ -90,12 +95,8 @@ void device_remove_file(struct device *, struct device_attribute *); It also defines this helper for defining device attributes: -#define DEVICE_ATTR(_name, _mode, _show, _store) \ -struct device_attribute dev_attr_##_name = { \ - .attr = {.name = __stringify(_name) , .mode = _mode }, \ - .show = _show, \ - .store = _store, \ -}; +#define DEVICE_ATTR(_name, _mode, _show, _store) \ +struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) For example, declaring @@ -107,9 +108,9 @@ static struct device_attribute dev_attr_foo = { .attr = { .name = "foo", .mode = S_IWUSR | S_IRUGO, + .show = show_foo, + .store = store_foo, }, - .show = show_foo, - .store = store_foo, }; @@ -161,10 +162,12 @@ To read or write attributes, show() or store() methods must be specified when declaring the attribute. The method types should be as simple as those defined for device attributes: - ssize_t (*show)(struct device * dev, char * buf); - ssize_t (*store)(struct device * dev, const char * buf); +ssize_t (*show)(struct device * dev, struct device_attribute * attr, + char * buf); +ssize_t (*store)(struct device * dev, struct device_attribute * attr, + const char * buf); -IOW, they should take only an object and a buffer as parameters. +IOW, they should take only an object, an attribute, and a buffer as parameters. sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the @@ -299,14 +302,16 @@ The following interface layers currently exist in sysfs: Structure: struct device_attribute { - struct attribute attr; - ssize_t (*show)(struct device * dev, char * buf); - ssize_t (*store)(struct device * dev, const char * buf); + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); }; Declaring: -DEVICE_ATTR(_name, _str, _mode, _show, _store); +DEVICE_ATTR(_name, _mode, _show, _store); Creation/Removal: @@ -342,7 +347,8 @@ Structure: struct driver_attribute { struct attribute attr; ssize_t (*show)(struct device_driver *, char * buf); - ssize_t (*store)(struct device_driver *, const char * buf); + ssize_t (*store)(struct device_driver *, const char * buf, + size_t count); }; Declaring: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b182626739ea..54f21a5c262b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -114,7 +114,7 @@ In addition, the following text indicates that the option: Parameters denoted with BOOT are actually interpreted by the boot loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme -need or coordination with . +need or coordination with . There are also arch-specific kernel-parameters not documented here. See for example . @@ -134,7 +134,7 @@ and is between 256 and 4096 characters. It is defined in the file acpi= [HW,ACPI,X86-64,i386] Advanced Configuration and Power Interface - Format: { force | off | ht | strict | noirq } + Format: { force | off | ht | strict | noirq | rsdt } force -- enable ACPI if default was off off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing @@ -868,8 +868,10 @@ and is between 256 and 4096 characters. It is defined in the file icn= [HW,ISDN] Format: [,[,[,]]] - ide= [HW] (E)IDE subsystem - Format: ide=nodma or ide=doubler + ide-core.nodma= [HW] (E)IDE subsystem + Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc + .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom + .chs .ignore_cable are additional options See Documentation/ide/ide.txt. idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed @@ -2449,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/fb/modedb.txt. vga= [BOOT,X86-32] Select a particular video mode - See Documentation/x86/i386/boot.txt and + See Documentation/x86/boot.txt and Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is diff --git a/Documentation/scsi/cxgb3i.txt b/Documentation/scsi/cxgb3i.txt index 8141fa01978e..7ac8032ee9b2 100644 --- a/Documentation/scsi/cxgb3i.txt +++ b/Documentation/scsi/cxgb3i.txt @@ -4,7 +4,7 @@ Introduction ============ The Chelsio T3 ASIC based Adapters (S310, S320, S302, S304, Mezz cards, etc. -series of products) supports iSCSI acceleration and iSCSI Direct Data Placement +series of products) support iSCSI acceleration and iSCSI Direct Data Placement (DDP) where the hardware handles the expensive byte touching operations, such as CRC computation and verification, and direct DMA to the final host memory destination: @@ -31,9 +31,9 @@ destination: the TCP segments onto the wire. It handles TCP retransmission if needed. - On receving, S3 h/w recovers the iSCSI PDU by reassembling TCP + On receiving, S3 h/w recovers the iSCSI PDU by reassembling TCP segments, separating the header and data, calculating and verifying - the digests, then forwards the header to the host. The payload data, + the digests, then forwarding the header to the host. The payload data, if possible, will be directly placed into the pre-posted host DDP buffer. Otherwise, the payload data will be sent to the host too. @@ -68,9 +68,8 @@ The following steps need to be taken to accelerates the open-iscsi initiator: sure the ip address is unique in the network. 3. edit /etc/iscsi/iscsid.conf - The default setting for MaxRecvDataSegmentLength (131072) is too big, - replace "node.conn[0].iscsi.MaxRecvDataSegmentLength" to be a value no - bigger than 15360 (for example 8192): + The default setting for MaxRecvDataSegmentLength (131072) is too big; + replace with a value no bigger than 15360 (for example 8192): node.conn[0].iscsi.MaxRecvDataSegmentLength = 8192 diff --git a/MAINTAINERS b/MAINTAINERS index 06e03913d2d3..1c2ca1dc66f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2464,7 +2464,7 @@ S: Maintained ISDN SUBSYSTEM P: Karsten Keil -M: kkeil@suse.de +M: isdn@linux-pingi.de L: isdn4linux@listserv.isdn4linux.de (subscribers-only) W: http://www.isdn4linux.de T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git @@ -3334,8 +3334,8 @@ P: Jeremy Fitzhardinge M: jeremy@xensource.com P: Chris Wright M: chrisw@sous-sol.org -P: Zachary Amsden -M: zach@vmware.com +P: Alok Kataria +M: akataria@vmware.com P: Rusty Russell M: rusty@rustcorp.com.au L: virtualization@lists.osdl.org diff --git a/Makefile b/Makefile index 59cf6dacec07..d04ee0ad1dcc 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 29 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc7 NAME = Erotic Pickled Herring # *DOCUMENTATION* diff --git a/README b/README index 90a07658ede1..d6c6c742c1d7 100644 --- a/README +++ b/README @@ -188,7 +188,7 @@ CONFIGURING the kernel: values to random values. You can find more information on using the Linux kernel config tools - in Documentation/kbuild/make-configs.txt. + in Documentation/kbuild/kconfig.txt. NOTES on "make config": - having unnecessary drivers will make the kernel bigger, and can diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 49a6ba926c2b..159d0416f270 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -111,6 +111,7 @@ ENTRY(mcount) .globl mcount_call mcount_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} ENTRY(ftrace_caller) @@ -122,6 +123,7 @@ ENTRY(ftrace_caller) .globl ftrace_call ftrace_call: bl ftrace_stub + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} #else @@ -133,6 +135,7 @@ ENTRY(mcount) adr r0, ftrace_stub cmp r0, r2 bne trace + ldr lr, [fp, #-4] @ restore lr ldmia sp!, {r0-r3, pc} trace: @@ -141,6 +144,7 @@ trace: sub r0, r0, #MCOUNT_INSN_SIZE mov lr, pc mov pc, r2 + mov lr, r1 @ restore lr ldmia sp!, {r0-r3, pc} #endif /* CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 36f81d967979..6ff7919613d7 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -88,7 +88,7 @@ void set_fiq_handler(void *start, unsigned int length) * disable irqs for the duration. Note - these functions are almost * entirely coded in assembly. */ -void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) +void __naked set_fiq_regs(struct pt_regs *regs) { register unsigned long tmp; asm volatile ( @@ -106,7 +106,7 @@ void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs) : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); } -void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs) +void __naked get_fiq_regs(struct pt_regs *regs) { register unsigned long tmp; asm volatile ( diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7049815d66d5..68d6494c0389 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -233,12 +233,13 @@ static void __init cacheid_init(void) unsigned int cachetype = read_cpuid_cachetype(); unsigned int arch = cpu_architecture(); - if (arch >= CPU_ARCH_ARMv7) { - cacheid = CACHEID_VIPT_NONALIASING; - if ((cachetype & (3 << 14)) == 1 << 14) - cacheid |= CACHEID_ASID_TAGGED; - } else if (arch >= CPU_ARCH_ARMv6) { - if (cachetype & (1 << 23)) + if (arch >= CPU_ARCH_ARMv6) { + if ((cachetype & (7 << 29)) == 4 << 29) { + /* ARMv7 register format */ + cacheid = CACHEID_VIPT_NONALIASING; + if ((cachetype & (3 << 14)) == 1 << 14) + cacheid |= CACHEID_ASID_TAGGED; + } else if (cachetype & (1 << 23)) cacheid = CACHEID_VIPT_ALIASING; else cacheid = CACHEID_VIPT_NONALIASING; diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 9bb4f043aa22..7ac812dc055a 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state) at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: - sdram_selfrefresh_disable(); target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index a957d239a683..38b6a9ce2a93 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + return 0; } @@ -417,9 +420,6 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); } static __init void davinci_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 28f6dbc95bd7..abb92b7eca0c 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -230,6 +230,11 @@ static struct clk davinci_clks[] = { .rate = &commonrate, .lpsc = DAVINCI_LPSC_GPIO, }, + { + .name = "usb", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_USB, + }, { .name = "AEMIFCLK", .rate = &commonrate, diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 867ead2559ad..69680784448a 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = { #elif defined(CONFIG_USB_MUSB_HOST) .mode = MUSB_HOST, #endif + .clock = "usb", .config = &musb_config, }; diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 88f7e88f152f..05f0f4f2f3ce 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -4,6 +4,8 @@ #ifndef __ASSEMBLY__ +struct i2c_board_info; + struct ep93xx_eth_data { unsigned char dev_addr[6]; diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c index 686d8d2dbb24..a95644193f3f 100644 --- a/arch/arm/mach-mx1/devices.c +++ b/arch/arm/mach-mx1/devices.c @@ -23,6 +23,8 @@ #include #include #include + +#include #include static struct resource imx_csi_resources[] = { diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c index 2e4b185fe4a9..3200cf60e384 100644 --- a/arch/arm/mach-mx1/mx1ads.c +++ b/arch/arm/mach-mx1/mx1ads.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 38c88fbe658d..e39cd2c46cfa 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -178,7 +178,9 @@ static int __init omap3_beagle_i2c_init(void) #ifdef CONFIG_I2C2_OMAP_BEAGLE omap_register_i2c_bus(2, 400, NULL, 0); #endif - omap_register_i2c_bus(3, 400, NULL, 0); + /* Bus 3 is attached to the DVI port where devices like the pico DLP + * projector don't work reliably with 400kHz */ + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 0a623379789f..8a0e49d84256 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -431,6 +431,10 @@ void __init orion5x_uart1_init(void) /***************************************************************************** * XOR engine ****************************************************************************/ +struct mv_xor_platform_shared_data orion5x_xor_shared_data = { + .dram = &orion5x_mbus_dram_info, +}; + static struct resource orion5x_xor_shared_resources[] = { { .name = "xor low", @@ -448,6 +452,9 @@ static struct resource orion5x_xor_shared_resources[] = { static struct platform_device orion5x_xor_shared = { .name = MV_XOR_SHARED_NAME, .id = 0, + .dev = { + .platform_data = &orion5x_xor_shared_data, + }, .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources), .resource = orion5x_xor_shared_resources, }; diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index e88d417736af..c7fc01e9d1f6 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -201,8 +202,13 @@ static struct platform_device *devs[] __initdata = { &pata_device, }; +static struct i2c_board_info i2c_rtc = { + I2C_BOARD_INFO("pcf8583", 0x50) +}; + static int __init rpc_init(void) { + i2c_register_board_info(0, &i2c_rtc, 1); return platform_add_devices(devs, ARRAY_SIZE(devs)); } diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index 3c4d47145c83..25f7935576f8 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -129,7 +129,7 @@ static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = { .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, }; -struct map_desc smdk6410_iodesc[] = {}; +static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { #ifdef CONFIG_SMDK6410_SD_CH0 @@ -146,7 +146,7 @@ static struct platform_device *smdk6410_devices[] __initdata = { static struct i2c_board_info i2c_devs0[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), }, - { I2C_BOARD_INFO("WM8580", 0X1b), }, + { I2C_BOARD_INFO("wm8580", 0x1b), }, }; static struct i2c_board_info i2c_devs1[] __initdata = { diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 8a7f65ba14b7..94077fbd96b7 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -23,7 +23,8 @@ ENTRY(v6_early_abort) #ifdef CONFIG_CPU_32v6K clrex #else - strex r0, r1, [sp] @ Clear the exclusive monitor + sub r1, sp, #4 @ Get unused stack location + strex r0, r1, [r1] @ Clear the exclusive monitor #endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c index c3ba6a94da0c..70997d5bee2d 100644 --- a/arch/arm/mm/copypage-feroceon.c +++ b/arch/arm/mm/copypage-feroceon.c @@ -13,7 +13,7 @@ #include #include -static void __attribute__((naked)) +static void __naked feroceon_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c index 70ed96c8af8e..de9c06854ad7 100644 --- a/arch/arm/mm/copypage-v3.c +++ b/arch/arm/mm/copypage-v3.c @@ -15,7 +15,7 @@ * * FIXME: do we need to handle cache stuff... */ -static void __attribute__((naked)) +static void __naked v3_copy_user_page(void *kto, const void *kfrom) { asm("\n\ diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 1601698b9800..7370a7142b04 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(minicache_lock); * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __attribute__((naked)) +static void __naked mc_copy_user_page(void *from, void *to) { asm volatile( diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c index 3ec93dab7656..9ab098414227 100644 --- a/arch/arm/mm/copypage-v4wb.c +++ b/arch/arm/mm/copypage-v4wb.c @@ -22,7 +22,7 @@ * instruction. If your processor does not supply this, you have to write your * own copy_user_highpage that does the right thing. */ -static void __attribute__((naked)) +static void __naked v4wb_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c index 0f1188efae45..300efafd6643 100644 --- a/arch/arm/mm/copypage-v4wt.c +++ b/arch/arm/mm/copypage-v4wt.c @@ -20,7 +20,7 @@ * dirty data in the cache. However, we do have to ensure that * subsequent reads are up to date. */ -static void __attribute__((naked)) +static void __naked v4wt_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c index 39a994542cad..bc4525f5ab23 100644 --- a/arch/arm/mm/copypage-xsc3.c +++ b/arch/arm/mm/copypage-xsc3.c @@ -29,7 +29,7 @@ * if we eventually end up using our copied page. * */ -static void __attribute__((naked)) +static void __naked xsc3_mc_copy_user_page(void *kto, const void *kfrom) { asm("\ diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index d18f2397ee2d..76824d3e966a 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock); * Dcache aliasing issue. The writes will be forwarded to the write buffer, * and merged as appropriate. */ -static void __attribute__((naked)) +static void __naked mc_copy_user_page(void *from, void *to) { /* diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index deaff58878a2..04a100cfb8e5 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -18,7 +18,8 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o -obj-$(CONFIG_I2C_OMAP) += i2c.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) # OMAP mailbox framework obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 0843b8882f93..6825fbb5a056 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -199,21 +199,17 @@ static struct clocksource clocksource_32k = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -/* - * Rounds down to nearest nsec. - */ -unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k) -{ - return cyc2ns(&clocksource_32k, ticks_32k); -} - /* * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. */ unsigned long long sched_clock(void) { - return omap_32k_ticks_to_nsecs(omap_32k_read()); + unsigned long long ret; + + ret = (unsigned long long)omap_32k_read(); + ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift; + return ret; } static int __init omap_init_clocksource_32k(void) diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h index ef70e2b0f054..e746ec7e785e 100644 --- a/arch/arm/plat-omap/include/mach/common.h +++ b/arch/arm/plat-omap/include/mach/common.h @@ -35,7 +35,7 @@ extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); extern void omap_serial_enable_clocks(int enable); -#ifdef CONFIG_I2C_OMAP +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len); diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 2a9c27ad4c37..37e2f0f38b46 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -108,7 +108,7 @@ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) && \ !defined(CONFIG_ARCH_OMAP24XX) -#error "Power management for this processor not implemented yet" +#warning "Power management for this processor not implemented yet" #endif #ifndef __ASSEMBLER__ diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c index 136c982c68e1..ad1b9682c9c3 100644 --- a/arch/arm/plat-s3c64xx/clock.c +++ b/arch/arm/plat-s3c64xx/clock.c @@ -248,7 +248,7 @@ static struct clk *clks[] __initdata = { &clk_48m, }; -void s3c64xx_register_clocks(void) +void __init s3c64xx_register_clocks(void) { struct clk *clkp; int ret; diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index cc62941d7b5c..ee9188add8fb 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -417,4 +417,4 @@ static __init int s3c64xx_gpiolib_init(void) return 0; } -arch_initcall(s3c64xx_gpiolib_init); +core_initcall(s3c64xx_gpiolib_init); diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h index 2846f550b727..f865bf4d709e 100644 --- a/arch/arm/plat-s3c64xx/include/plat/irqs.h +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -117,7 +117,7 @@ #define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) #define IRQ_NFC S3C64XX_IRQ_VIC1(13) #define IRQ_CFCON S3C64XX_IRQ_VIC1(14) -#define IRQ_UHOST S3C64XX_IRQ_VIC1(15) +#define IRQ_USBH S3C64XX_IRQ_VIC1(15) #define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) #define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) #define IRQ_IIC S3C64XX_IRQ_VIC1(18) diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5c..cf524826c93a 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -14,12 +14,15 @@ #include #include +#include #include #include #include #include +#include +#include #include #include @@ -55,7 +58,7 @@ static void s3c_irq_eint_unmask(unsigned int irq) u32 mask; mask = __raw_readl(S3C64XX_EINT0MASK); - mask |= eint_irq_to_bit(irq); + mask &= ~eint_irq_to_bit(irq); __raw_writel(mask, S3C64XX_EINT0MASK); } @@ -74,6 +77,7 @@ static void s3c_irq_eint_maskack(unsigned int irq) static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) { int offs = eint_offset(irq); + int pin; int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -125,6 +129,15 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) ctrl |= newvalue << shift; __raw_writel(ctrl, reg); + /* set the GPIO pin appropriately */ + + if (offs < 23) + pin = S3C64XX_GPN(offs); + else + pin = S3C64XX_GPM(offs - 23); + + s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2)); + return 0; } @@ -181,7 +194,7 @@ static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) s3c_irq_demux_eint(20, 27); } -int __init s3c64xx_init_irq_eint(void) +static int __init s3c64xx_init_irq_eint(void) { int irq; diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c index a94f1d5e819d..f22edf7c2d2d 100644 --- a/arch/arm/plat-s3c64xx/irq.c +++ b/arch/arm/plat-s3c64xx/irq.c @@ -207,7 +207,7 @@ static struct irq_chip s3c_irq_uart = { static void __init s3c64xx_uart_irq(struct uart_irq *uirq) { - void *reg_base = uirq->regs; + void __iomem *reg_base = uirq->regs; unsigned int irq; int offs; diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 8d9a0cada668..05b17528041e 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -36,7 +36,7 @@ * ext_xtal_mux for want of an actual name from the manual. */ -struct clk clk_ext_xtal_mux = { +static struct clk clk_ext_xtal_mux = { .name = "ext_xtal", .id = -1, }; @@ -63,7 +63,7 @@ struct clksrc_clk { void __iomem *reg_divider; }; -struct clk clk_fout_apll = { +static struct clk clk_fout_apll = { .name = "fout_apll", .id = -1, }; @@ -78,7 +78,7 @@ static struct clk_sources clk_src_apll = { .nr_sources = ARRAY_SIZE(clk_src_apll_list), }; -struct clksrc_clk clk_mout_apll = { +static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", .id = -1, @@ -88,7 +88,7 @@ struct clksrc_clk clk_mout_apll = { .sources = &clk_src_apll, }; -struct clk clk_fout_epll = { +static struct clk clk_fout_epll = { .name = "fout_epll", .id = -1, }; @@ -103,7 +103,7 @@ static struct clk_sources clk_src_epll = { .nr_sources = ARRAY_SIZE(clk_src_epll_list), }; -struct clksrc_clk clk_mout_epll = { +static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", .id = -1, @@ -123,7 +123,7 @@ static struct clk_sources clk_src_mpll = { .nr_sources = ARRAY_SIZE(clk_src_mpll_list), }; -struct clksrc_clk clk_mout_mpll = { +static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", .id = -1, @@ -145,7 +145,7 @@ static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) return rate; } -struct clk clk_dout_mpll = { +static struct clk clk_dout_mpll = { .name = "dout_mpll", .id = -1, .parent = &clk_mout_mpll.clk, @@ -189,10 +189,10 @@ static struct clk_sources clkset_uart = { }; static struct clk *clkset_uhost_list[] = { + &clk_48m, &clk_mout_epll.clk, &clk_dout_mpll, &clk_fin_epll, - &clk_48m, }; static struct clk_sources clkset_uhost = { @@ -239,10 +239,12 @@ static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) rate = clk_round_rate(clk, rate); div = clk_get_rate(clk->parent) / rate; + if (div > 16) + return -EINVAL; val = __raw_readl(reg); - val &= ~sclk->mask; - val |= (rate - 1) << sclk->shift; + val &= ~(0xf << sclk->shift); + val |= (div - 1) << sclk->shift; __raw_writel(val, reg); return 0; @@ -351,7 +353,7 @@ static struct clksrc_clk clk_mmc2 = { static struct clksrc_clk clk_usbhost = { .clk = { - .name = "usb-host-bus", + .name = "usb-bus-host", .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fd23c0e9e698..b4211d8b2ac7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Nov 30 16:39:36 2008 +# Last update: Thu Mar 12 18:01:45 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1811,7 +1811,7 @@ pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 jade MACH_JADE JADE 1821 ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 gprisc3 MACH_GPRISC3 GPRISC3 1823 -stamp9260 MACH_STAMP9260 STAMP9260 1824 +stamp9g20 MACH_STAMP9G20 STAMP9G20 1824 smdk6430 MACH_SMDK6430 SMDK6430 1825 smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 @@ -1993,4 +1993,134 @@ spark MACH_SPARK SPARK 2002 benzina MACH_BENZINA BENZINA 2003 blaze MACH_BLAZE BLAZE 2004 linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005 -htcvenus MACH_HTCVENUS HTCVENUS 2006 +htckovsky MACH_HTCVENUS HTCVENUS 2006 +sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007 +hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008 +sapphira MACH_SAPPHIRA SAPPHIRA 2009 +dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010 +armbox MACH_ARMBOX ARMBOX 2011 +harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012 +ribaldo MACH_RIBALDO RIBALDO 2013 +agora MACH_AGORA AGORA 2014 +omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015 +a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016 +usg2410 MACH_USG2410 USG2410 2017 +pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018 +mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019 +topas910 MACH_TOPAS910 TOPAS910 2020 +hyena MACH_HYENA HYENA 2021 +pospax MACH_POSPAX POSPAX 2022 +hdl_gx MACH_HDL_GX HDL_GX 2023 +ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024 +ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025 +crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026 +egauge2 MACH_EGAUGE2 EGAUGE2 2027 +didj MACH_DIDJ DIDJ 2028 +m_s3c2443 MACH_MEISTER MEISTER 2029 +htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030 +cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031 +smdk6440 MACH_SMDK6440 SMDK6440 2032 +omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033 +ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034 +pvg610_100 MACH_PVG610 PVG610 2035 +hprw6815 MACH_HPRW6815 HPRW6815 2036 +omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037 +nas4220b MACH_NAS4220B NAS4220B 2038 +htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039 +htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040 +scaler MACH_SCALER SCALER 2041 +zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042 +aspenite MACH_ASPENITE ASPENITE 2043 +teton MACH_TETON TETON 2044 +ttc_dkb MACH_TTC_DKB TTC_DKB 2045 +bishop2 MACH_BISHOP2 BISHOP2 2046 +ippv5 MACH_IPPV5 IPPV5 2047 +farm926 MACH_FARM926 FARM926 2048 +mmccpu MACH_MMCCPU MMCCPU 2049 +sgmsfl MACH_SGMSFL SGMSFL 2050 +tt8000 MACH_TT8000 TT8000 2051 +zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052 +mptc MACH_MPTC MPTC 2053 +h6051 MACH_H6051 H6051 2054 +pvg610_101 MACH_PVG610_101 PVG610_101 2055 +stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056 +pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057 +tny_a9260 MACH_TNY_A9260 TNY_A9260 2058 +tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059 +aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060 +dx900 MACH_DX900 DX900 2061 +cpodc2 MACH_CPODC2 CPODC2 2062 +tilt_8925 MACH_TILT_8925 TILT_8925 2063 +davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064 +swordfish MACH_SWORDFISH SWORDFISH 2065 +corvus MACH_CORVUS CORVUS 2066 +taurus MACH_TAURUS TAURUS 2067 +axm MACH_AXM AXM 2068 +axc MACH_AXC AXC 2069 +baby MACH_BABY BABY 2070 +mp200 MACH_MP200 MP200 2071 +pcm043 MACH_PCM043 PCM043 2072 +hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073 +kbk9g20 MACH_KBK9G20 KBK9G20 2074 +adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075 +avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076 +suc82x MACH_SUC SUC 2077 +at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078 +mendoza MACH_MENDOZA MENDOZA 2079 +kira MACH_KIRA KIRA 2080 +mx1hbm MACH_MX1HBM MX1HBM 2081 +quatro43xx MACH_QUATRO43XX QUATRO43XX 2082 +quatro4230 MACH_QUATRO4230 QUATRO4230 2083 +nsb400 MACH_NSB400 NSB400 2084 +drp255 MACH_DRP255 DRP255 2085 +thoth MACH_THOTH THOTH 2086 +firestone MACH_FIRESTONE FIRESTONE 2087 +asusp750 MACH_ASUSP750 ASUSP750 2088 +ctera_dl MACH_CTERA_DL CTERA_DL 2089 +socr MACH_SOCR SOCR 2090 +htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091 +heroc MACH_HEROC HEROC 2092 +zeno6800 MACH_ZENO6800 ZENO6800 2093 +sc2mcs MACH_SC2MCS SC2MCS 2094 +gene100 MACH_GENE100 GENE100 2095 +as353x MACH_AS353X AS353X 2096 +sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097 +at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098 +mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099 +cc9200 MACH_CC9200 CC9200 2100 +sm9200 MACH_SM9200 SM9200 2101 +tp9200 MACH_TP9200 TP9200 2102 +snapperdv MACH_SNAPPERDV SNAPPERDV 2103 +avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104 +avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105 +omap3axon MACH_OMAP3AXON OMAP3AXON 2106 +ma8xx MACH_MA8XX MA8XX 2107 +mp201ek MACH_MP201EK MP201EK 2108 +davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109 +mpa1600 MACH_MPA1600 MPA1600 2110 +pelco_troy MACH_PELCO_TROY PELCO_TROY 2111 +nsb667 MACH_NSB667 NSB667 2112 +rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113 +twocom MACH_TWOCOM TWOCOM 2114 +ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115 +hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116 +afeusb MACH_AFEUSB AFEUSB 2117 +t830 MACH_T830 T830 2118 +spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119 +om_3d7k MACH_OM_3D7K OM_3D7K 2120 +picocom2 MACH_PICOCOM2 PICOCOM2 2121 +uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122 +uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123 +cherry MACH_CHERRY CHERRY 2124 +mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125 +s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126 +tx37 MACH_TX37 TX37 2127 +sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128 +benzglb MACH_BENZGLB BENZGLB 2129 +benztd MACH_BENZTD BENZTD 2130 +cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131 +solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132 +mx27wallace MACH_MX27WALLACE MX27WALLACE 2133 +fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134 +rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135 +smallogger MACH_SMALLOGGER SMALLOGGER 2136 diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 6183aeccecf1..153e727a6e8e 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -221,7 +221,11 @@ config IA64_HP_SIM config IA64_XEN_GUEST bool "Xen guest" + select SWIOTLB depends on XEN + help + Build a kernel that runs on Xen guest domain. At this moment only + 16KB page size in supported. endchoice @@ -479,8 +483,7 @@ config HOLES_IN_ZONE default y if VIRTUAL_MEM_MAP config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool y - depends on NEED_MULTIPLE_NODES + def_bool NUMA && SPARSEMEM config HAVE_ARCH_NODEDATA_EXTENSION def_bool y @@ -635,6 +638,17 @@ config DMAR and include PCI device scope covered by these DMA remapping devices. +config DMAR_DEFAULT_ON + def_bool y + prompt "Enable DMA Remapping Devices by default" + depends on DMAR + help + Selecting this option will enable a DMAR device at boot time if + one is found. If this option is not selected, DMAR support can + be enabled by passing intel_iommu=on to the kernel. It is + recommended you say N here while the DMAR code remains + experimental. + endmenu endif diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig new file mode 100644 index 000000000000..0bb0714dc19d --- /dev/null +++ b/arch/ia64/configs/xen_domu_defconfig @@ -0,0 +1,1601 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc1 +# Fri Jan 16 11:49:59 2009 +# +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +# CONFIG_GROUP_SCHED is not set + +# +# Control Group support +# +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_FREEZER=y + +# +# Processor type and features +# +CONFIG_IA64=y +CONFIG_64BIT=y +CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_DMI=y +CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_AUDIT_ARCH=y +CONFIG_PARAVIRT_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_XEN=y +CONFIG_XEN_XENCOMM=y +CONFIG_NO_IDLE_HZ=y +# CONFIG_IA64_GENERIC is not set +# CONFIG_IA64_DIG is not set +# CONFIG_IA64_DIG_VTD is not set +# CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set +# CONFIG_IA64_SGI_SN2 is not set +# CONFIG_IA64_SGI_UV is not set +# CONFIG_IA64_HP_SIM is not set +CONFIG_IA64_XEN_GUEST=y +# CONFIG_ITANIUM is not set +CONFIG_MCKINLEY=y +# CONFIG_IA64_PAGE_SIZE_4KB is not set +# CONFIG_IA64_PAGE_SIZE_8KB is not set +CONFIG_IA64_PAGE_SIZE_16KB=y +# CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_SCHED_HRTICK is not set +CONFIG_IA64_L1_CACHE_SHIFT=7 +CONFIG_IA64_CYCLONE=y +CONFIG_IOSAPIC=y +CONFIG_FORCE_MAX_ZONEORDER=17 +# CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_SCHED_SMT is not set +CONFIG_PERMIT_BSP_REMOVE=y +CONFIG_FORCE_CPEI_RETARGET=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_VIRTUAL_MEM_MAP=y +CONFIG_HOLES_IN_ZONE=y +# CONFIG_IA32_SUPPORT is not set +# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set +CONFIG_IA64_MCA_RECOVERY=y +CONFIG_PERFMON=y +CONFIG_IA64_PALINFO=y +# CONFIG_IA64_MC_ERR_INJECT is not set +# CONFIG_IA64_ESI is not set +# CONFIG_IA64_HP_AML_NFW is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set + +# +# Firmware Drivers +# +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_EFI_VARS=y +CONFIG_EFI_PCDP=y +CONFIG_DMIID=y +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m + +# +# Power management and ACPI options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y +CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y +CONFIG_ACPI_BUTTON=m +CONFIG_ACPI_FAN=m +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=m +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_SYSTEM=y +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA) +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +CONFIG_HOTPLUG_PCI_ACPI=m +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_PCCARD is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEACPI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +CONFIG_SCSI_QLOGIC_1280=y +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=y +# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_MAX_SGE=128 +CONFIG_FUSION_CTL=y +# CONFIG_FUSION_LOGGING is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_SB1000 is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=m +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_E100=m +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT_EMU10K1 is not set +# CONFIG_GAMEPORT_FM801 is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +CONFIG_EFI_RTC=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +CONFIG_RAW_DRIVER=m +CONFIG_MAX_RAW_DEVS=256 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=m +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_AGP=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +# CONFIG_STAGING is not set +# CONFIG_MSPEC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_IA64_GRANULE_16MB=y +# CONFIG_IA64_GRANULE_64MB is not set +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set +# CONFIG_IA64_DEBUG_CMPXCHG is not set +# CONFIG_IA64_DEBUG_IRQ is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_IRQ_PER_CPU=y +# CONFIG_IOMMU_API is not set diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h index 5efecf06c9a4..96798d2da7c2 100644 --- a/arch/ia64/include/asm/sn/bte.h +++ b/arch/ia64/include/asm/sn/bte.h @@ -39,7 +39,7 @@ /* BTE status register only supports 16 bits for length field */ #define BTE_LEN_BITS (16) #define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) -#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) +#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT) /* Define hardware */ diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 5cfd3d91001a..e13125058bed 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -507,7 +507,7 @@ static int iosapic_find_sharable_irq(unsigned long trigger, unsigned long pol) if (trigger == IOSAPIC_EDGE) return -EINVAL; - for (i = 0; i <= NR_IRQS; i++) { + for (i = 0; i < NR_IRQS; i++) { info = &iosapic_intr_info[i]; if (info->trigger == trigger && info->polarity == pol && (info->dmode == IOSAPIC_FIXED || diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 11463994a7d5..52290547c85b 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -736,14 +736,15 @@ int __cpu_disable(void) return -EBUSY; } + cpu_clear(cpu, cpu_online_map); + if (migrate_platform_irqs(cpu)) { cpu_set(cpu, cpu_online_map); - return (-EBUSY); + return -EBUSY; } remove_siblinginfo(cpu); fixup_irqs(); - cpu_clear(cpu, cpu_online_map); local_flush_tlb_all(); cpu_clear(cpu, cpu_callin_map); return 0; diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index 67810b77d998..b6c0e63a0bf6 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2149,7 +2149,7 @@ unw_remove_unwind_table (void *handle) /* next, remove hash table entries for this table */ - for (index = 0; index <= UNW_HASH_SIZE; ++index) { + for (index = 0; index < UNW_HASH_SIZE; ++index) { tmp = unw.cache + unw.hash[index]; if (unw.hash[index] >= UNW_CACHE_SIZE || tmp->ip < table->start || tmp->ip >= table->end) diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 9456d4034024..c6d6b62db66c 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -97,9 +97,10 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification) return BTE_SUCCESS; } - BUG_ON((len & L1_CACHE_MASK) || - (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK)); - BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT))); + BUG_ON(len & L1_CACHE_MASK); + BUG_ON(src & L1_CACHE_MASK); + BUG_ON(dest & L1_CACHE_MASK); + BUG_ON(len > BTE_MAX_XFER); /* * Start with interface corresponding to cpu number diff --git a/arch/ia64/xen/Kconfig b/arch/ia64/xen/Kconfig index f1683a20275b..515e0826803a 100644 --- a/arch/ia64/xen/Kconfig +++ b/arch/ia64/xen/Kconfig @@ -8,8 +8,7 @@ config XEN depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL select XEN_XENCOMM select NO_IDLE_HZ - - # those are required to save/restore. + # followings are required to save/restore. select ARCH_SUSPEND_POSSIBLE select SUSPEND select PM_SLEEP diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c index 04cd12350455..936cff3c96e0 100644 --- a/arch/ia64/xen/xen_pv_ops.c +++ b/arch/ia64/xen/xen_pv_ops.c @@ -153,7 +153,7 @@ xen_post_smp_prepare_boot_cpu(void) xen_setup_vcpu_info_placement(); } -static const struct pv_init_ops xen_init_ops __initdata = { +static const struct pv_init_ops xen_init_ops __initconst = { .banner = xen_banner, .reserve_memory = xen_reserve_memory, @@ -337,7 +337,7 @@ xen_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op); } -static const struct pv_iosapic_ops xen_iosapic_ops __initdata = { +static const struct pv_iosapic_ops xen_iosapic_ops __initconst = { .pcat_compat_init = xen_pcat_compat_init, .__get_irq_chip = xen_iosapic_get_irq_chip, diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index dba4afabb444..39478dd08e67 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -187,8 +187,8 @@ __asm__ (__ALIGN_STR "\n" \ " jbra ret_from_interrupt\n" \ : : "i" (&kstat_cpu(0).irqs[n+8]), "i" (&irq_handler[n+8]), \ "n" (PT_OFF_SR), "n" (n), \ - "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &mfp.int_mk_a) \ - : (n & 16 ? &tt_mfp.int_mk_b : &mfp.int_mk_b)), \ + "i" (n & 8 ? (n & 16 ? &tt_mfp.int_mk_a : &st_mfp.int_mk_a) \ + : (n & 16 ? &tt_mfp.int_mk_b : &st_mfp.int_mk_b)), \ "m" (preempt_count()), "di" (HARDIRQ_OFFSET) \ ); \ for (;;); /* fake noreturn */ \ @@ -366,14 +366,14 @@ void __init atari_init_IRQ(void) /* Initialize the MFP(s) */ #ifdef ATARI_USE_SOFTWARE_EOI - mfp.vec_adr = 0x48; /* Software EOI-Mode */ + st_mfp.vec_adr = 0x48; /* Software EOI-Mode */ #else - mfp.vec_adr = 0x40; /* Automatic EOI-Mode */ + st_mfp.vec_adr = 0x40; /* Automatic EOI-Mode */ #endif - mfp.int_en_a = 0x00; /* turn off MFP-Ints */ - mfp.int_en_b = 0x00; - mfp.int_mk_a = 0xff; /* no Masking */ - mfp.int_mk_b = 0xff; + st_mfp.int_en_a = 0x00; /* turn off MFP-Ints */ + st_mfp.int_en_b = 0x00; + st_mfp.int_mk_a = 0xff; /* no Masking */ + st_mfp.int_mk_b = 0xff; if (ATARIHW_PRESENT(TT_MFP)) { #ifdef ATARI_USE_SOFTWARE_EOI diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index a5f33c059979..4add96d13b19 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -609,10 +609,10 @@ int atari_keyb_init(void) ACIA_RHTID : 0); /* make sure the interrupt line is up */ - } while ((mfp.par_dt_reg & 0x10) == 0); + } while ((st_mfp.par_dt_reg & 0x10) == 0); /* enable ACIA Interrupts */ - mfp.active_edge &= ~0x10; + st_mfp.active_edge &= ~0x10; atari_turnon_irq(IRQ_MFP_ACIA); ikbd_self_test = 1; diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index 49c28cdbea5c..ae2d96e5d618 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -258,7 +258,7 @@ void __init config_atari(void) printk("STND_SHIFTER "); } } - if (hwreg_present(&mfp.par_dt_reg)) { + if (hwreg_present(&st_mfp.par_dt_reg)) { ATARIHW_SET(ST_MFP); printk("ST_MFP "); } diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c index 702b15ccfab7..28efdc33c1ae 100644 --- a/arch/m68k/atari/debug.c +++ b/arch/m68k/atari/debug.c @@ -34,9 +34,9 @@ static struct console atari_console_driver = { static inline void ata_mfp_out(char c) { - while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */ + while (!(st_mfp.trn_stat & 0x80)) /* wait for tx buf empty */ barrier(); - mfp.usart_dta = c; + st_mfp.usart_dta = c; } static void atari_mfp_console_write(struct console *co, const char *str, @@ -91,7 +91,7 @@ static int ata_par_out(char c) /* This a some-seconds timeout in case no printer is connected */ unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ; - while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */ + while ((st_mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */ ; if (!i) return 0; @@ -131,9 +131,9 @@ static void atari_par_console_write(struct console *co, const char *str, #if 0 int atari_mfp_console_wait_key(struct console *co) { - while (!(mfp.rcv_stat & 0x80)) /* wait for rx buf filled */ + while (!(st_mfp.rcv_stat & 0x80)) /* wait for rx buf filled */ barrier(); - return mfp.usart_dta; + return st_mfp.usart_dta; } int atari_scc_console_wait_key(struct console *co) @@ -175,12 +175,12 @@ static void __init atari_init_mfp_port(int cflag) baud = B9600; /* use default 9600bps for non-implemented rates */ baud -= B1200; /* baud_table[] starts at 1200bps */ - mfp.trn_stat &= ~0x01; /* disable TX */ - mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */ - mfp.tim_ct_cd &= 0x70; /* stop timer D */ - mfp.tim_dt_d = baud_table[baud]; - mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */ - mfp.trn_stat |= 0x01; /* enable TX */ + st_mfp.trn_stat &= ~0x01; /* disable TX */ + st_mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */ + st_mfp.tim_ct_cd &= 0x70; /* stop timer D */ + st_mfp.tim_dt_d = baud_table[baud]; + st_mfp.tim_ct_cd |= 0x01; /* start timer D, 1:4 */ + st_mfp.trn_stat |= 0x01; /* enable TX */ } #define SCC_WRITE(reg, val) \ diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c index d076ff8d1b39..a0531f34c617 100644 --- a/arch/m68k/atari/time.c +++ b/arch/m68k/atari/time.c @@ -27,9 +27,9 @@ void __init atari_sched_init(irq_handler_t timer_routine) { /* set Timer C data Register */ - mfp.tim_dt_c = INT_TICKS; + st_mfp.tim_dt_c = INT_TICKS; /* start timer C, div = 1:100 */ - mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60; + st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 15) | 0x60; /* install interrupt service routine for MFP Timer C */ if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW, "timer", timer_routine)) @@ -46,11 +46,11 @@ unsigned long atari_gettimeoffset (void) unsigned long ticks, offset = 0; /* read MFP timer C current value */ - ticks = mfp.tim_dt_c; + ticks = st_mfp.tim_dt_c; /* The probability of underflow is less than 2% */ if (ticks > INT_TICKS - INT_TICKS / 50) /* Check for pending timer interrupt */ - if (mfp.int_pn_b & (1 << 5)) + if (st_mfp.int_pn_b & (1 << 5)) offset = TICK_SIZE; ticks = INT_TICKS - ticks; diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h index 1412b4ab202f..a714e1aa072a 100644 --- a/arch/m68k/include/asm/atarihw.h +++ b/arch/m68k/include/asm/atarihw.h @@ -113,7 +113,7 @@ extern struct atari_hw_present atari_hw_present; * of nops on various machines. Somebody claimed that the tstb takes 600 ns. */ #define MFPDELAY() \ - __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" ); + __asm__ __volatile__ ( "tstb %0" : : "m" (st_mfp.par_dt_reg) : "cc" ); /* Do cache push/invalidate for DMA read/write. This function obeys the * snooping on some machines (Medusa) and processors: The Medusa itself can @@ -565,7 +565,7 @@ struct MFP u_char char_dummy23; u_char usart_dta; }; -# define mfp ((*(volatile struct MFP*)MFP_BAS)) +# define st_mfp ((*(volatile struct MFP*)MFP_BAS)) /* TT's second MFP */ diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h index 5748e99f4e26..f597892e43a0 100644 --- a/arch/m68k/include/asm/atariints.h +++ b/arch/m68k/include/asm/atariints.h @@ -113,7 +113,7 @@ static inline int get_mfp_bit( unsigned irq, int type ) { unsigned char mask, *reg; mask = 1 << (irq & 7); - reg = (unsigned char *)&mfp.int_en_a + type*4 + + reg = (unsigned char *)&st_mfp.int_en_a + type*4 + ((irq & 8) >> 2) + (((irq-8) & 16) << 3); return( *reg & mask ); } @@ -123,7 +123,7 @@ static inline void set_mfp_bit( unsigned irq, int type ) { unsigned char mask, *reg; mask = 1 << (irq & 7); - reg = (unsigned char *)&mfp.int_en_a + type*4 + + reg = (unsigned char *)&st_mfp.int_en_a + type*4 + ((irq & 8) >> 2) + (((irq-8) & 16) << 3); __asm__ __volatile__ ( "orb %0,%1" : : "di" (mask), "m" (*reg) : "memory" ); @@ -134,7 +134,7 @@ static inline void clear_mfp_bit( unsigned irq, int type ) { unsigned char mask, *reg; mask = ~(1 << (irq & 7)); - reg = (unsigned char *)&mfp.int_en_a + type*4 + + reg = (unsigned char *)&st_mfp.int_en_a + type*4 + ((irq & 8) >> 2) + (((irq-8) & 16) << 3); if (type == MFP_PENDING || type == MFP_SERVICE) __asm__ __volatile__ ( "moveb %0,%1" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 600eef3f3ac7..e61465a18c7e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -603,7 +603,7 @@ config CAVIUM_OCTEON_SIMULATOR select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select CPU_CAVIUM_OCTEON + select SYS_HAS_CPU_CAVIUM_OCTEON help The Octeon simulator is software performance model of the Cavium Octeon Processor. It supports simulating Octeon processors on x86 @@ -618,7 +618,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK - select CPU_CAVIUM_OCTEON + select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE help This option supports all of the Octeon reference boards from Cavium @@ -1234,6 +1234,7 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" + depends on SYS_HAS_CPU_CAVIUM_OCTEON select IRQ_CPU select IRQ_CPU_OCTEON select CPU_HAS_PREFETCH @@ -1314,6 +1315,9 @@ config SYS_HAS_CPU_RM9000 config SYS_HAS_CPU_SB1 bool +config SYS_HAS_CPU_CAVIUM_OCTEON + bool + # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -1387,6 +1391,7 @@ config 32BIT config 64BIT bool "64-bit kernel" depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL + select HAVE_SYSCALL_WRAPPERS help Select this option if you want to build a 64-bit kernel. diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 6fd441d16af5..f58d4ffb8945 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -118,7 +118,7 @@ void __init plat_time_init(void) * setup counter 1 (RTC) to tick at full speed */ t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; @@ -127,7 +127,7 @@ void __init plat_time_init(void) au_sync(); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; @@ -135,7 +135,7 @@ void __init plat_time_init(void) au_sync(); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h index 36ed44070256..a6772e9507f5 100644 --- a/arch/mips/include/asm/seccomp.h +++ b/arch/mips/include/asm/seccomp.h @@ -1,6 +1,5 @@ #ifndef __ASM_SECCOMP_H -#include #include #define __NR_seccomp_read __NR_read diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index a0ff2b66e22b..4b4007b3083a 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -111,7 +111,6 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %14s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index aa2c55e3b55f..2f8452b404c7 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -63,9 +64,9 @@ #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL)) #endif -asmlinkage unsigned long -sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) +SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { struct file * file = NULL; unsigned long error; @@ -121,21 +122,21 @@ struct rlimit32 { int rlim_max; }; -asmlinkage long sys32_truncate64(const char __user * path, - unsigned long __dummy, int a2, int a3) +SYSCALL_DEFINE4(32_truncate64, const char __user *, path, + unsigned long, __dummy, unsigned long, a2, unsigned long, a3) { return sys_truncate(path, merge_64(a2, a3)); } -asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy, - int a2, int a3) +SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy, + unsigned long, a2, unsigned long, a3) { return sys_ftruncate(fd, merge_64(a2, a3)); } -asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, - unsigned int offset_low, loff_t __user * result, - unsigned int origin) +SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high, + unsigned long, offset_low, loff_t __user *, result, + unsigned long, origin) { return sys_llseek(fd, offset_high, offset_low, result, origin); } @@ -144,20 +145,20 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, lseek back to original location. They fail just like lseek does on non-seekable files. */ -asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf, - size_t count, u32 unused, u64 a4, u64 a5) +SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count, + unsigned long, unused, unsigned long, a4, unsigned long, a5) { return sys_pread64(fd, buf, count, merge_64(a4, a5)); } -asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf, - size_t count, u32 unused, u64 a4, u64 a5) +SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf, + size_t, count, u32, unused, u64, a4, u64, a5) { return sys_pwrite64(fd, buf, count, merge_64(a4, a5)); } -asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, - struct compat_timespec __user *interval) +SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid, + struct compat_timespec __user *, interval) { struct timespec t; int ret; @@ -174,8 +175,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, #ifdef CONFIG_SYSVIPC -asmlinkage long -sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) +SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, + unsigned long, ptr, unsigned long, fifth) { int version, err; @@ -233,8 +234,8 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) #else -asmlinkage long -sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) +SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, + u32, ptr, u32 fifth) { return -ENOSYS; } @@ -242,7 +243,7 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) #endif /* CONFIG_SYSVIPC */ #ifdef CONFIG_MIPS32_N32 -asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg) +SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg) { /* compat_sys_semctl expects a pointer to union semun */ u32 __user *uptr = compat_alloc_user_space(sizeof(u32)); @@ -251,13 +252,14 @@ asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg) return compat_sys_semctl(semid, semnum, cmd, uptr); } -asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg) +SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz, + int, msgflg) { return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp)); } -asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp, - int msgflg) +SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz, + int, msgtyp, int, msgflg) { return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64, compat_ptr(msgp)); @@ -277,7 +279,7 @@ struct sysctl_args32 #ifdef CONFIG_SYSCTL_SYSCALL -asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) +SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args) { struct sysctl_args32 tmp; int error; @@ -316,9 +318,16 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) return error; } +#else + +SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args) +{ + return -ENOSYS; +} + #endif /* CONFIG_SYSCTL_SYSCALL */ -asmlinkage long sys32_newuname(struct new_utsname __user * name) +SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name) { int ret = 0; @@ -334,7 +343,7 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name) return ret; } -asmlinkage int sys32_personality(unsigned long personality) +SYSCALL_DEFINE1(32_personality, unsigned long, personality) { int ret; personality &= 0xffffffff; @@ -357,7 +366,7 @@ struct ustat32 { extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf); -asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32) +SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32) { int err; struct ustat tmp; @@ -381,8 +390,8 @@ out: return err; } -asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, - s32 count) +SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd, + compat_off_t __user *, offset, s32, count) { mm_segment_t old_fs = get_fs(); int ret; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 51d1ba415b90..9ab70c3b5be6 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -399,7 +399,7 @@ einval: li v0, -ENOSYS sys sys_swapon 2 sys sys_reboot 3 sys sys_old_readdir 3 - sys old_mmap 6 /* 4090 */ + sys sys_mips_mmap 6 /* 4090 */ sys sys_munmap 2 sys sys_truncate 2 sys sys_ftruncate 2 @@ -519,7 +519,7 @@ einval: li v0, -ENOSYS sys sys_sendfile 4 sys sys_ni_syscall 0 sys sys_ni_syscall 0 - sys sys_mmap2 6 /* 4210 */ + sys sys_mips_mmap2 6 /* 4210 */ sys sys_truncate64 4 sys sys_ftruncate64 4 sys sys_stat64 2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a9e171618994..9b4698667154 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -207,7 +207,7 @@ sys_call_table: PTR sys_newlstat PTR sys_poll PTR sys_lseek - PTR old_mmap + PTR sys_mips_mmap PTR sys_mprotect /* 5010 */ PTR sys_munmap PTR sys_brk diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 30f3b6317a83..7438e92f8a01 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -129,12 +129,12 @@ EXPORT(sysn32_call_table) PTR sys_newlstat PTR sys_poll PTR sys_lseek - PTR old_mmap + PTR sys_mips_mmap PTR sys_mprotect /* 6010 */ PTR sys_munmap PTR sys_brk - PTR sys32_rt_sigaction - PTR sys32_rt_sigprocmask + PTR sys_32_rt_sigaction + PTR sys_32_rt_sigprocmask PTR compat_sys_ioctl /* 6015 */ PTR sys_pread64 PTR sys_pwrite64 @@ -159,7 +159,7 @@ EXPORT(sysn32_call_table) PTR compat_sys_setitimer PTR sys_alarm PTR sys_getpid - PTR sys32_sendfile + PTR sys_32_sendfile PTR sys_socket /* 6040 */ PTR sys_connect PTR sys_accept @@ -181,14 +181,14 @@ EXPORT(sysn32_call_table) PTR sys_exit PTR compat_sys_wait4 PTR sys_kill /* 6060 */ - PTR sys32_newuname + PTR sys_32_newuname PTR sys_semget PTR sys_semop - PTR sysn32_semctl + PTR sys_n32_semctl PTR sys_shmdt /* 6065 */ PTR sys_msgget - PTR sysn32_msgsnd - PTR sysn32_msgrcv + PTR sys_n32_msgsnd + PTR sys_n32_msgrcv PTR compat_sys_msgctl PTR compat_sys_fcntl /* 6070 */ PTR sys_flock @@ -245,15 +245,15 @@ EXPORT(sysn32_call_table) PTR sys_getsid PTR sys_capget PTR sys_capset - PTR sys32_rt_sigpending /* 6125 */ + PTR sys_32_rt_sigpending /* 6125 */ PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sys_32_rt_sigqueueinfo PTR sysn32_rt_sigsuspend PTR sys32_sigaltstack PTR compat_sys_utime /* 6130 */ PTR sys_mknod - PTR sys32_personality - PTR sys32_ustat + PTR sys_32_personality + PTR sys_32_ustat PTR compat_sys_statfs PTR compat_sys_fstatfs /* 6135 */ PTR sys_sysfs @@ -265,14 +265,14 @@ EXPORT(sysn32_call_table) PTR sys_sched_getscheduler PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR sys32_sched_rr_get_interval /* 6145 */ + PTR sys_32_sched_rr_get_interval /* 6145 */ PTR sys_mlock PTR sys_munlock PTR sys_mlockall PTR sys_munlockall PTR sys_vhangup /* 6150 */ PTR sys_pivot_root - PTR sys32_sysctl + PTR sys_32_sysctl PTR sys_prctl PTR compat_sys_adjtimex PTR compat_sys_setrlimit /* 6155 */ diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index fefef4af8595..b0fef4ff9827 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -265,12 +265,12 @@ sys_call_table: PTR sys_olduname PTR sys_umask /* 4060 */ PTR sys_chroot - PTR sys32_ustat + PTR sys_32_ustat PTR sys_dup2 PTR sys_getppid PTR sys_getpgrp /* 4065 */ PTR sys_setsid - PTR sys32_sigaction + PTR sys_32_sigaction PTR sys_sgetmask PTR sys_ssetmask PTR sys_setreuid /* 4070 */ @@ -293,7 +293,7 @@ sys_call_table: PTR sys_swapon PTR sys_reboot PTR compat_sys_old_readdir - PTR old_mmap /* 4090 */ + PTR sys_mips_mmap /* 4090 */ PTR sys_munmap PTR sys_truncate PTR sys_ftruncate @@ -320,12 +320,12 @@ sys_call_table: PTR compat_sys_wait4 PTR sys_swapoff /* 4115 */ PTR compat_sys_sysinfo - PTR sys32_ipc + PTR sys_32_ipc PTR sys_fsync PTR sys32_sigreturn PTR sys32_clone /* 4120 */ PTR sys_setdomainname - PTR sys32_newuname + PTR sys_32_newuname PTR sys_ni_syscall /* sys_modify_ldt */ PTR compat_sys_adjtimex PTR sys_mprotect /* 4125 */ @@ -339,11 +339,11 @@ sys_call_table: PTR sys_fchdir PTR sys_bdflush PTR sys_sysfs /* 4135 */ - PTR sys32_personality + PTR sys_32_personality PTR sys_ni_syscall /* for afs_syscall */ PTR sys_setfsuid PTR sys_setfsgid - PTR sys32_llseek /* 4140 */ + PTR sys_32_llseek /* 4140 */ PTR compat_sys_getdents PTR compat_sys_select PTR sys_flock @@ -356,7 +356,7 @@ sys_call_table: PTR sys_ni_syscall /* 4150 */ PTR sys_getsid PTR sys_fdatasync - PTR sys32_sysctl + PTR sys_32_sysctl PTR sys_mlock PTR sys_munlock /* 4155 */ PTR sys_mlockall @@ -368,7 +368,7 @@ sys_call_table: PTR sys_sched_yield PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR sys32_sched_rr_get_interval /* 4165 */ + PTR sys_32_sched_rr_get_interval /* 4165 */ PTR compat_sys_nanosleep PTR sys_mremap PTR sys_accept @@ -397,25 +397,25 @@ sys_call_table: PTR sys_getresgid PTR sys_prctl PTR sys32_rt_sigreturn - PTR sys32_rt_sigaction - PTR sys32_rt_sigprocmask /* 4195 */ - PTR sys32_rt_sigpending + PTR sys_32_rt_sigaction + PTR sys_32_rt_sigprocmask /* 4195 */ + PTR sys_32_rt_sigpending PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sys_32_rt_sigqueueinfo PTR sys32_rt_sigsuspend - PTR sys32_pread /* 4200 */ - PTR sys32_pwrite + PTR sys_32_pread /* 4200 */ + PTR sys_32_pwrite PTR sys_chown PTR sys_getcwd PTR sys_capget PTR sys_capset /* 4205 */ PTR sys32_sigaltstack - PTR sys32_sendfile + PTR sys_32_sendfile PTR sys_ni_syscall PTR sys_ni_syscall - PTR sys32_mmap2 /* 4210 */ - PTR sys32_truncate64 - PTR sys32_ftruncate64 + PTR sys_mips_mmap2 /* 4210 */ + PTR sys_32_truncate64 + PTR sys_32_ftruncate64 PTR sys_newstat PTR sys_newlstat PTR sys_newfstat /* 4215 */ @@ -481,7 +481,7 @@ sys_call_table: PTR compat_sys_mq_notify /* 4275 */ PTR compat_sys_mq_getsetattr PTR sys_ni_syscall /* sys_vserver */ - PTR sys32_waitid + PTR sys_32_waitid PTR sys_ni_syscall /* available, was setaltroot */ PTR sys_add_key /* 4280 */ PTR sys_request_key diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index a4e106c56ab5..830c5ef9932b 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -338,8 +339,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) } #ifdef CONFIG_TRAD_SIGNALS -asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact) +SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 652709b353ad..2e74075ac0ca 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -349,8 +349,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -ERESTARTNOHAND; } -asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act, - struct sigaction32 __user *oact) +SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act, + struct sigaction32 __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -704,9 +704,9 @@ struct mips_abi mips_abi_32 = { .restart = __NR_O32_restart_syscall }; -asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, - struct sigaction32 __user *oact, - unsigned int sigsetsize) +SYSCALL_DEFINE4(32_rt_sigaction, int, sig, + const struct sigaction32 __user *, act, + struct sigaction32 __user *, oact, unsigned int, sigsetsize) { struct k_sigaction new_sa, old_sa; int ret = -EINVAL; @@ -748,8 +748,8 @@ out: return ret; } -asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, - compat_sigset_t __user *oset, unsigned int sigsetsize) +SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set, + compat_sigset_t __user *, oset, unsigned int, sigsetsize) { sigset_t old_set, new_set; int ret; @@ -770,8 +770,8 @@ asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, return ret; } -asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset, - unsigned int sigsetsize) +SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset, + unsigned int, sigsetsize) { int ret; sigset_t set; @@ -787,7 +787,8 @@ asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset, return ret; } -asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo) +SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig, + compat_siginfo_t __user *, uinfo) { siginfo_t info; int ret; @@ -802,10 +803,9 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user * return ret; } -asmlinkage long -sys32_waitid(int which, compat_pid_t pid, - compat_siginfo_t __user *uinfo, int options, - struct compat_rusage __user *uru) +SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid, + compat_siginfo_t __user *, uinfo, int, options, + struct compat_rusage __user *, uru) { siginfo_t info; struct rusage ru; diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 37970d9b2186..8cf384644040 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -152,9 +152,9 @@ out: return error; } -asmlinkage unsigned long -old_mmap(unsigned long addr, unsigned long len, int prot, - int flags, int fd, off_t offset) +SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, + fd, off_t, offset) { unsigned long result; @@ -168,9 +168,9 @@ out: return result; } -asmlinkage unsigned long -sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) +SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { if (pgoff & (~PAGE_MASK >> 12)) return -EINVAL; @@ -240,7 +240,7 @@ out: /* * Compacrapability ... */ -asmlinkage int sys_uname(struct old_utsname __user * name) +SYSCALL_DEFINE1(uname, struct old_utsname __user *, name) { if (name && !copy_to_user(name, utsname(), sizeof (*name))) return 0; @@ -250,7 +250,7 @@ asmlinkage int sys_uname(struct old_utsname __user * name) /* * Compacrapability ... */ -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name) { int error; @@ -279,7 +279,7 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) return error; } -asmlinkage int sys_set_thread_area(unsigned long addr) +SYSCALL_DEFINE1(set_thread_area, unsigned long, addr) { struct thread_info *ti = task_thread_info(current); @@ -290,7 +290,7 @@ asmlinkage int sys_set_thread_area(unsigned long addr) return 0; } -asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) +asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3) { switch (cmd) { case MIPS_ATOMIC_SET: @@ -325,8 +325,8 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) * * This is really horribly ugly. */ -asmlinkage int sys_ipc(unsigned int call, int first, int second, - unsigned long third, void __user *ptr, long fifth) +SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second, + unsigned long, third, void __user *, ptr, long, fifth) { int version, ret; @@ -411,7 +411,7 @@ asmlinkage int sys_ipc(unsigned int call, int first, int second, /* * No implemented yet ... */ -asmlinkage int sys_cachectl(char *addr, int nbytes, int op) +SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op) { return -ENOSYS; } diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 98ad0a82c29e..694d51f523d1 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -58,8 +59,8 @@ EXPORT_SYMBOL(_dma_cache_wback_inv); * We could optimize the case where the cache argument is not BCACHE but * that seems very atypical use ... */ -asmlinkage int sys_cacheflush(unsigned long addr, - unsigned long bytes, unsigned int cache) +SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes, + unsigned int, cache) { if (bytes == 0) return 0; diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index 9a9f43358879..41d16822e616 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -7,6 +7,7 @@ mainmenu "Linux Kernel Configuration" config MN10300 def_bool y + select HAVE_OPROFILE config AM33 def_bool y diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 1a86425fec42..07dbbcda3b2e 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -173,7 +173,7 @@ static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn, BRIDGEREGB(where) = value; } else { if (bus->number == 0 && - (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0)) + (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0)) ) __pcidebug("<= %02x", bus, devfn, where, value); CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where); diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index d811a8cd7b58..4774c2f92232 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -210,5 +210,10 @@ struct compat_shmid64_ds { compat_ulong_t __unused6; }; +static inline int is_compat_task(void) +{ + return test_thread_flag(TIF_32BIT); +} + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_COMPAT_H */ diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h index 853765eb1f65..00c1d9133cfe 100644 --- a/arch/powerpc/include/asm/seccomp.h +++ b/arch/powerpc/include/asm/seccomp.h @@ -1,10 +1,6 @@ #ifndef _ASM_POWERPC_SECCOMP_H #define _ASM_POWERPC_SECCOMP_H -#ifdef __KERNEL__ -#include -#endif - #include #define __NR_seccomp_read __NR_read diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index ada06924a423..73cb6a3229ae 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -367,27 +367,24 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg, unsigned int flags) { - char *ptr = (char *) ¤t->thread.TS_FPR(reg); - int i, ret; + char *ptr0 = (char *) ¤t->thread.TS_FPR(reg); + char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1); + int i, ret, sw = 0; if (!(flags & F)) return 0; if (reg & 1) return 0; /* invalid form: FRS/FRT must be even */ - if (!(flags & SW)) { - /* not byte-swapped - easy */ - if (!(flags & ST)) - ret = __copy_from_user(ptr, addr, 16); - else - ret = __copy_to_user(addr, ptr, 16); - } else { - /* each FPR value is byte-swapped separately */ - ret = 0; - for (i = 0; i < 16; ++i) { - if (!(flags & ST)) - ret |= __get_user(ptr[i^7], addr + i); - else - ret |= __put_user(ptr[i^7], addr + i); + if (flags & SW) + sw = 7; + ret = 0; + for (i = 0; i < 8; ++i) { + if (!(flags & ST)) { + ret |= __get_user(ptr0[i^sw], addr + i); + ret |= __get_user(ptr1[i^sw], addr + i + 8); + } else { + ret |= __put_user(ptr0[i^sw], addr + i); + ret |= __put_user(ptr1[i^sw], addr + i + 8); } } if (ret) diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 70693a5c12a1..693b14a778fa 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -62,18 +62,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 72: std r8,8(r3) beq+ 3f addi r3,r3,16 -23: ld r9,8(r4) .Ldo_tail: bf cr7*4+1,1f - rotldi r9,r9,32 +23: lwz r9,8(r4) + addi r4,r4,4 73: stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f - rotldi r9,r9,16 +44: lhz r9,8(r4) + addi r4,r4,2 74: sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f - rotldi r9,r9,8 +45: lbz r9,8(r4) 75: stb r9,0(r3) 3: li r3,0 blr @@ -141,11 +142,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 6: cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 - ble cr1,.Ldo_tail + ble cr1,7f 34: ld r0,8(r4) srd r7,r0,r11 or r9,r7,r9 - b .Ldo_tail +7: + bf cr7*4+1,1f + rotldi r9,r9,32 +94: stw r9,0(r3) + addi r3,r3,4 +1: bf cr7*4+2,2f + rotldi r9,r9,16 +95: sth r9,0(r3) + addi r3,r3,2 +2: bf cr7*4+3,3f + rotldi r9,r9,8 +96: stb r9,0(r3) +3: li r3,0 + blr .Ldst_unaligned: PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */ @@ -218,7 +232,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 121: 132: addi r3,r3,8 -123: 134: 135: 138: @@ -226,6 +239,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 140: 141: 142: +123: +144: +145: /* * here we have had a fault on a load and r3 points to the first @@ -309,6 +325,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 187: 188: 189: +194: +195: +196: 1: ld r6,-24(r1) ld r5,-8(r1) @@ -329,7 +348,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .llong 72b,172b .llong 23b,123b .llong 73b,173b + .llong 44b,144b .llong 74b,174b + .llong 45b,145b .llong 75b,175b .llong 24b,124b .llong 25b,125b @@ -347,6 +368,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .llong 79b,179b .llong 80b,180b .llong 34b,134b + .llong 94b,194b + .llong 95b,195b + .llong 96b,196b .llong 35b,135b .llong 81b,181b .llong 36b,136b diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index fe2d34e5332d..e178922b2c21 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -53,18 +53,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 3: std r8,8(r3) beq 3f addi r3,r3,16 - ld r9,8(r4) .Ldo_tail: bf cr7*4+1,1f - rotldi r9,r9,32 + lwz r9,8(r4) + addi r4,r4,4 stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f - rotldi r9,r9,16 + lhz r9,8(r4) + addi r4,r4,2 sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f - rotldi r9,r9,8 + lbz r9,8(r4) stb r9,0(r3) 3: ld r3,48(r1) /* return dest pointer */ blr @@ -133,11 +134,24 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 - ble cr1,.Ldo_tail + ble cr1,6f ld r0,8(r4) srd r7,r0,r11 or r9,r7,r9 - b .Ldo_tail +6: + bf cr7*4+1,1f + rotldi r9,r9,32 + stw r9,0(r3) + addi r3,r3,4 +1: bf cr7*4+2,2f + rotldi r9,r9,16 + sth r9,0(r3) + addi r3,r3,2 +2: bf cr7*4+3,3f + rotldi r9,r9,8 + stb r9,0(r3) +3: ld r3,48(r1) /* return dest pointer */ + blr .Ldst_unaligned: PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7 diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index fb371f5ce132..d6b772ba3b8f 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -142,6 +142,10 @@ static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) { unsigned int val; + /* Do not do the fixup on other platforms! */ + if (!machine_is(gef_sbc610)) + return; + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 77fae5f64f2e..5558d932b4d5 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -204,6 +204,23 @@ static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller *hose, { u32 ma, pcila, pciha; + /* Hack warning ! The "old" PCI 2.x cell only let us configure the low + * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit + * address are actually hard wired to a value that appears to depend + * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx. + * + * The trick here is we just crop those top bits and ignore them when + * programming the chip. That means the device-tree has to be right + * for the specific part used (we don't print a warning if it's wrong + * but on the other hand, you'll crash quickly enough), but at least + * this code should work whatever the hard coded value is + */ + plb_addr &= 0xffffffffull; + + /* Note: Due to the above hack, the test below doesn't actually test + * if you address is above 4G, but it tests that address and + * (address + size) are both contained in the same 4G + */ if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) || size < 0x1000 || (plb_addr & (size - 1)) != 0) { printk(KERN_WARNING "%s: Resource out of range\n", diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index c42cd898f68b..6118890c946d 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -556,7 +556,7 @@ static void __exit aes_s390_fini(void) module_init(aes_s390_init); module_exit(aes_s390_fini); -MODULE_ALIAS("aes"); +MODULE_ALIAS("aes-all"); MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm"); MODULE_LICENSE("GPL"); diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7c35787d29b4..72da416f6162 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include