From df4d737ee4d7205aaa6275158aeebff87fd14488 Mon Sep 17 00:00:00 2001 From: Melissa Wen Date: Sat, 18 May 2019 22:04:56 -0300 Subject: [PATCH 1/5] staging:iio:ad7150: fix threshold mode config bit According to the AD7150 configuration register description, bit 7 assumes value 1 when the threshold mode is fixed and 0 when it is adaptive, however, the operation that identifies this mode was considering the opposite values. This patch renames the boolean variable to describe it correctly and properly replaces it in the places where it is used. Fixes: 531efd6aa0991 ("staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control.") Signed-off-by: Melissa Wen Signed-off-by: Jonathan Cameron --- drivers/staging/iio/cdc/ad7150.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c index dd7fcab8e19e..e075244c602b 100644 --- a/drivers/staging/iio/cdc/ad7150.c +++ b/drivers/staging/iio/cdc/ad7150.c @@ -5,6 +5,7 @@ * Copyright 2010-2011 Analog Devices Inc. */ +#include #include #include #include @@ -130,7 +131,7 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev, { int ret; u8 threshtype; - bool adaptive; + bool thrfixed; struct ad7150_chip_info *chip = iio_priv(indio_dev); ret = i2c_smbus_read_byte_data(chip->client, AD7150_CFG); @@ -138,21 +139,23 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev, return ret; threshtype = (ret >> 5) & 0x03; - adaptive = !!(ret & 0x80); + + /*check if threshold mode is fixed or adaptive*/ + thrfixed = FIELD_GET(AD7150_CFG_FIX, ret); switch (type) { case IIO_EV_TYPE_MAG_ADAPTIVE: if (dir == IIO_EV_DIR_RISING) - return adaptive && (threshtype == 0x1); - return adaptive && (threshtype == 0x0); + return !thrfixed && (threshtype == 0x1); + return !thrfixed && (threshtype == 0x0); case IIO_EV_TYPE_THRESH_ADAPTIVE: if (dir == IIO_EV_DIR_RISING) - return adaptive && (threshtype == 0x3); - return adaptive && (threshtype == 0x2); + return !thrfixed && (threshtype == 0x3); + return !thrfixed && (threshtype == 0x2); case IIO_EV_TYPE_THRESH: if (dir == IIO_EV_DIR_RISING) - return !adaptive && (threshtype == 0x1); - return !adaptive && (threshtype == 0x0); + return thrfixed && (threshtype == 0x1); + return thrfixed && (threshtype == 0x0); default: break; } From bce0d57db388cdb1c1931d0aa7d31c77b590e0f0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Sun, 19 May 2019 10:58:23 +0200 Subject: [PATCH 2/5] iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller Properly suspend/resume i2c slaves connected to st_lsm6dsx master controller if the CPU goes in suspended state Fixes: c91c1c844ebd ("imu: st_lsm6dsx: add i2c embedded controller support") Signed-off-by: Lorenzo Bianconi Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 25 +++++++++++++------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h index 004a8a1a0027..6ef3577234a0 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -271,6 +271,7 @@ struct st_lsm6dsx_sensor { * @conf_lock: Mutex to prevent concurrent FIFO configuration update. * @page_lock: Mutex to prevent concurrent memory page configuration. * @fifo_mode: FIFO operating mode supported by the device. + * @suspend_mask: Suspended sensor bitmask. * @enable_mask: Enabled sensor bitmask. * @ts_sip: Total number of timestamp samples in a given pattern. * @sip: Total number of samples (acc/gyro/ts) in a given pattern. @@ -288,6 +289,7 @@ struct st_lsm6dsx_hw { struct mutex page_lock; enum st_lsm6dsx_fifo_mode fifo_mode; + u8 suspend_mask; u8 enable_mask; u8 ts_sip; u8 sip; diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c index cf82c9049945..be5c87c8266d 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -1110,8 +1110,6 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev) { struct st_lsm6dsx_hw *hw = dev_get_drvdata(dev); struct st_lsm6dsx_sensor *sensor; - const struct st_lsm6dsx_reg *reg; - unsigned int data; int i, err = 0; for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { @@ -1122,12 +1120,16 @@ static int __maybe_unused st_lsm6dsx_suspend(struct device *dev) if (!(hw->enable_mask & BIT(sensor->id))) continue; - reg = &st_lsm6dsx_odr_table[sensor->id].reg; - data = ST_LSM6DSX_SHIFT_VAL(0, reg->mask); - err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, - data); + if (sensor->id == ST_LSM6DSX_ID_EXT0 || + sensor->id == ST_LSM6DSX_ID_EXT1 || + sensor->id == ST_LSM6DSX_ID_EXT2) + err = st_lsm6dsx_shub_set_enable(sensor, false); + else + err = st_lsm6dsx_sensor_set_enable(sensor, false); if (err < 0) return err; + + hw->suspend_mask |= BIT(sensor->id); } if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) @@ -1147,12 +1149,19 @@ static int __maybe_unused st_lsm6dsx_resume(struct device *dev) continue; sensor = iio_priv(hw->iio_devs[i]); - if (!(hw->enable_mask & BIT(sensor->id))) + if (!(hw->suspend_mask & BIT(sensor->id))) continue; - err = st_lsm6dsx_set_odr(sensor, sensor->odr); + if (sensor->id == ST_LSM6DSX_ID_EXT0 || + sensor->id == ST_LSM6DSX_ID_EXT1 || + sensor->id == ST_LSM6DSX_ID_EXT2) + err = st_lsm6dsx_shub_set_enable(sensor, true); + else + err = st_lsm6dsx_sensor_set_enable(sensor, true); if (err < 0) return err; + + hw->suspend_mask &= ~BIT(sensor->id); } if (hw->enable_mask) From 389fc70b60f534d679aea9a3f05146040ce20d77 Mon Sep 17 00:00:00 2001 From: Crt Mori Date: Thu, 23 May 2019 14:07:22 +0200 Subject: [PATCH 3/5] iio: temperature: mlx90632 Relax the compatibility check Register EE_VERSION contains mixture of calibration information and DSP version. So far, because calibrations were definite, the driver compatibility depended on whole contents, but in the newer production process the calibration part changes. Because of that, value in EE_VERSION will be changed and to avoid that calibration value is same as DSP version the MSB in calibration part was fixed to 1. That means existing calibrations (medical and consumer) will now have hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility should be based only on DSP version part of the EE_VERSION (bits 0 to 7) register. Signed-off-by: Crt Mori Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/temperature/mlx90632.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index be03be719efe..eaca6ba06864 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -81,6 +81,8 @@ /* Magic constants */ #define MLX90632_ID_MEDICAL 0x0105 /* EEPROM DSPv5 Medical device id */ #define MLX90632_ID_CONSUMER 0x0205 /* EEPROM DSPv5 Consumer device id */ +#define MLX90632_DSP_VERSION 5 /* DSP version */ +#define MLX90632_DSP_MASK GENMASK(7, 0) /* DSP version in EE_VERSION */ #define MLX90632_RESET_CMD 0x0006 /* Reset sensor (address or global) */ #define MLX90632_REF_12 12LL /**< ResCtrlRef value of Ch 1 or Ch 2 */ #define MLX90632_REF_3 12LL /**< ResCtrlRef value of Channel 3 */ @@ -667,10 +669,13 @@ static int mlx90632_probe(struct i2c_client *client, } else if (read == MLX90632_ID_CONSUMER) { dev_dbg(&client->dev, "Detected Consumer EEPROM calibration %x\n", read); + } else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) { + dev_dbg(&client->dev, + "Detected Unknown EEPROM calibration %x\n", read); } else { dev_err(&client->dev, - "EEPROM version mismatch %x (expected %x or %x)\n", - read, MLX90632_ID_CONSUMER, MLX90632_ID_MEDICAL); + "Wrong DSP version %x (expected %x)\n", + read, MLX90632_DSP_VERSION); return -EPROTONOSUPPORT; } From 767e52f045e1fc080e81a754cc31a39b6cf47b99 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 5 Jun 2019 23:05:32 -0300 Subject: [PATCH 4/5] staging: iio: adt7316: Fix build errors when GPIOLIB is not set On x86_64 when GPIOLIB is not set the following build errors are seen: drivers/staging/iio/addac/adt7316.c:947:3: error: implicit declaration of function 'gpiod_set_value' [-Werror=implicit-function-declaration] drivers/staging/iio/addac/adt7316.c:1805:2: error: implicit declaration of function 'irqd_get_trigger_type' [-Werror=implicit-function-declaration] These functions are provided by the and headers, so include them to fix these build errors. While at it, remove as this driver is a GPIO consumer and not a GPIO driver. Reported-by: Randy Dunlap Signed-off-by: Fabio Estevam Acked-by: Randy Dunlap # build-tested Signed-off-by: Jonathan Cameron --- drivers/staging/iio/addac/adt7316.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/iio/addac/adt7316.c b/drivers/staging/iio/addac/adt7316.c index b6a65ee8d558..dc8c25ddb97e 100644 --- a/drivers/staging/iio/addac/adt7316.c +++ b/drivers/staging/iio/addac/adt7316.c @@ -6,7 +6,8 @@ */ #include -#include +#include +#include #include #include #include From 0c75376fa3950b9875559dd79f73c36a5498a969 Mon Sep 17 00:00:00 2001 From: Patrick Havelange Date: Tue, 4 Jun 2019 16:03:26 +0200 Subject: [PATCH 5/5] counter/ftm-quaddec: Add missing dependencies in Kconfig This driver uses devm_ioremap and of* functions. This fixes a linking failure with e.g. ARCH=um. Reported-by: kbuild test robot Signed-off-by: Patrick Havelange Fixes: a3b9a99 ("counter: add FlexTimer Module Quadrature decoder counter driver") Signed-off-by: William Breathitt Gray Signed-off-by: Jonathan Cameron --- drivers/counter/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index 233ac305d878..c9e3f5c98484 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -50,6 +50,7 @@ config STM32_LPTIMER_CNT config FTM_QUADDEC tristate "Flex Timer Module Quadrature decoder driver" + depends on HAS_IOMEM && OF help Select this option to enable the Flex Timer Quadrature decoder driver.