Merge 3.0-rc2 into usb-linus as it's needed by some USB patches

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Greg Kroah-Hartman 2011-06-14 06:51:10 -07:00
commit dcc8545790
460 changed files with 5025 additions and 2786 deletions

View File

@ -518,6 +518,14 @@ N: Zach Brown
E: zab@zabbo.net
D: maestro pci sound
M: David Brownell
D: Kernel engineer, mentor, and friend. Maintained USB EHCI and
D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
D: device drivers. His encouragement also helped many engineers get
D: started working on the Linux kernel. David passed away in early
D: 2011, and will be greatly missed.
W: https://lkml.org/lkml/2011/4/5/36
N: Gary Brubaker
E: xavyer@ix.netcom.com
D: USB Serial Empeg Empeg-car Mark I/II Driver

View File

@ -2603,6 +2603,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
unlock ejectable media);
m = MAX_SECTORS_64 (don't transfer more
than 64 sectors = 32 KB at a time);
n = INITIAL_READ10 (force a retry of the
initial READ(10) command);
o = CAPACITY_OK (accept the capacity
reported by the device);
r = IGNORE_RESIDUE (the device reports

View File

@ -1739,7 +1739,7 @@ S: Supported
F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/arm/ep93xx_eth.c
@ -4252,8 +4252,7 @@ F: drivers/mmc/
F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
M: David Brownell <dbrownell@users.sourceforge.net>
S: Odd Fixes
S: Orphan
F: drivers/mmc/host/mmc_spi.c
F: include/linux/spi/mmc_spi.h
@ -4603,7 +4602,6 @@ F: drivers/media/video/omap3isp/*
OMAP USB SUPPORT
M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@ -4947,6 +4945,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi
F: drivers/input/serio/i8042-unicore32io.h
F: drivers/i2c/busses/i2c-puv3.c
F: drivers/video/fb-puv3.c
F: drivers/rtc/rtc-puv3.c
PMC SIERRA MaxRAID DRIVER
M: Anil Ravindranath <anil_ravindranath@pmc-sierra.com>
@ -5984,7 +5983,6 @@ F: Documentation/serial/specialix.txt
F: drivers/staging/tty/specialix*
SPI SUBSYSTEM
M: David Brownell <dbrownell@users.sourceforge.net>
M: Grant Likely <grant.likely@secretlab.ca>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
@ -6432,9 +6430,8 @@ S: Maintained
F: drivers/usb/misc/rio500*
USB EHCI DRIVER
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
S: Orphan
F: Documentation/usb/ehci.txt
F: drivers/usb/host/ehci*
@ -6448,9 +6445,10 @@ S: Maintained
F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
M: David Brownell <dbrownell@users.sourceforge.net>
M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/gadget/
F: include/linux/usb/gadget*
@ -6492,9 +6490,8 @@ S: Maintained
F: sound/usb/midi.*
USB OHCI DRIVER
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
S: Odd Fixes
S: Orphan
F: Documentation/usb/ohci.txt
F: drivers/usb/host/ohci*

View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 0
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Sneaky Weasel
# *DOCUMENTATION*
@ -378,7 +378,7 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
@ -1005,7 +1005,7 @@ endef
define filechk_version.h
(echo \#define LINUX_VERSION_CODE $(shell \
expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
@ -1110,11 +1110,6 @@ modules_install: _modinst_ _modinst_post
PHONY += _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@ -1531,12 +1526,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))
# Run depmod only if we have System.map and depmod is executable
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
cmd_depmod = \
if [ -r System.map -a -x $(DEPMOD) ]; then \
$(DEPMOD) -ae -F System.map \
$(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
$(KERNELRELEASE); \
fi
cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
# Create temporary dir for module support files
# clean it up only when building all modules

View File

@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
}
};
static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
static struct platform_device ep93xx_eth_device = {
.name = "ep93xx-eth",
.id = -1,
.dev = {
.platform_data = &ep93xx_eth_data,
.platform_data = &ep93xx_eth_data,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &ep93xx_eth_dma_mask,
},
.num_resources = ARRAY_SIZE(ep93xx_eth_resource),
.resource = ep93xx_eth_resource,

View File

@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
help
Common setup code for the camera interfaces.
config EXYNOS4_SETUP_USB_PHY
bool
help
Common setup code for USB PHY controller
# machine support
menu "EXYNOS4 Machines"
@ -176,6 +181,7 @@ config MACH_NURI
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
select SAMSUNG_DEV_PWM
help
Machine support for Samsung Mobile NURI Board.

View File

@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_USB_SUPPORT) += usb-phy.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o

View File

@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_USB_HSPHY,
.virtual = (unsigned long)S3C_VA_USB_HSPHY,
.pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
.length = SZ_4K,
.type = MT_DEVICE,

View File

@ -11,7 +11,7 @@
#ifndef __PLAT_S5P_REGS_USB_PHY_H
#define __PLAT_S5P_REGS_USB_PHY_H
#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY)
#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
#define PHY1_HSIC_NORMAL_MASK (0xf << 9)

View File

@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
}
#ifdef CONFIG_PM
static void exynos4_pwm4_resume(struct clocksource *cs)
{
unsigned long pclk;
@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
exynos4_pwm_init(4, ~0);
exynos4_pwm_start(4, 1);
}
#endif
struct clocksource pwm_clocksource = {
.name = "pwm_timer4",

View File

@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void)
dma_base = ioremap(res[0].start, resource_size(&res[0]));
if (!dma_base) {
pr_err("%s: Unable to ioremap\n", __func__);
return -ENODEV;
ret = -ENODEV;
goto exit_device_put;
}
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret) {
dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
__func__, pdev->name, pdev->id);
goto exit_device_del;
goto exit_device_put;
}
p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void)
dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
__func__, pdev->name);
ret = -ENOMEM;
goto exit_device_put;
goto exit_device_del;
}
d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@ -380,10 +381,10 @@ exit_release_d:
kfree(d);
exit_release_p:
kfree(p);
exit_device_put:
platform_device_put(pdev);
exit_device_del:
platform_device_del(pdev);
exit_device_put:
platform_device_put(pdev);
return ret;
}

View File

@ -26,13 +26,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>

View File

@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
OMAP_MUX_MODE0),
};
static struct omap_board_data serial1_data = {
static struct omap_board_data serial1_data __initdata = {
.id = 0,
.pads = serial1_pads,
.pads_cnt = ARRAY_SIZE(serial1_pads),
};
static struct omap_board_data serial2_data = {
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data = {
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),

View File

@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = {
{ ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" },
};
static int omap_ethernet_init(void)
static int __init omap_ethernet_init(void)
{
int status;
@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = {
.gpio_wp = -EINVAL,
.nonremovable = true,
.ocr_mask = MMC_VDD_29_30,
.no_off_init = true,
},
{
.mmc = 1,
@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data = {
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data = {
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data = {
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void)
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);

View File

@ -27,13 +27,13 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <mach/gpio.h>
#include <plat/led.h>
#include <plat/usb.h>
#include <plat/board.h>

View File

@ -63,8 +63,6 @@
#define SB_T35_SMSC911X_CS 4
#define SB_T35_SMSC911X_GPIO 65
#define NAND_BLOCK_SIZE SZ_128K
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
#include <linux/smsc911x.h>
#include <plat/gpmc-smsc911x.h>

View File

@ -48,6 +48,7 @@
#include "mux.h"
#include "control.h"
#include "common-board-devices.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
.reset_gpio_port[2] = -EINVAL,
};
static int cm_t3517_init_usbh(void)
static int __init cm_t3517_init_usbh(void)
{
int err;
@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
#define NAND_BLOCK_SIZE SZ_128K
static struct mtd_partition cm_t3517_nand_partitions[] = {
{
.name = "xloader",

View File

@ -61,8 +61,6 @@
#include "timer-gp.h"
#include "common-board-devices.h"
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27

View File

@ -54,8 +54,6 @@
#include "pm.h"
#include "common-board-devices.h"
#define NAND_BLOCK_SIZE SZ_128K
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void)
beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
| (gpio_get_value(173) << 2);
gpio_free_array(omap3_beagle_rev_gpios,
ARRAY_SIZE(omap3_beagle_rev_gpios));
switch (beagle_rev) {
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void)
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
/* Ensure msecure is mux'd to be able to set the RTC. */
omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

View File

@ -30,6 +30,7 @@
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@ -41,7 +42,6 @@
#include <plat/board.h>
#include <plat/common.h>
#include <mach/gpio.h>
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
@ -57,8 +57,6 @@
#define PANDORA_WIFI_NRESET_GPIO 23
#define OMAP3_PANDORA_TS_GPIO 94
#define NAND_BLOCK_SIZE SZ_128K
static struct mtd_partition omap3pandora_nand_partitions[] = {
{
.name = "xloader",

View File

@ -56,8 +56,6 @@
#include <asm/setup.h>
#define NAND_BLOCK_SIZE SZ_128K
#define OMAP3_AC_GPIO 136
#define OMAP3_TS_GPIO 162
#define TB_BL_PWM_TIMER 9

View File

@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
};
static struct omap_board_data serial2_data = {
static struct omap_board_data serial2_data __initdata = {
.id = 1,
.pads = serial2_pads,
.pads_cnt = ARRAY_SIZE(serial2_pads),
};
static struct omap_board_data serial3_data = {
static struct omap_board_data serial3_data __initdata = {
.id = 2,
.pads = serial3_pads,
.pads_cnt = ARRAY_SIZE(serial3_pads),
};
static struct omap_board_data serial4_data = {
static struct omap_board_data serial4_data __initdata = {
.id = 3,
.pads = serial4_pads,
.pads_cnt = ARRAY_SIZE(serial4_pads),
@ -687,7 +687,7 @@ static void __init omap4_panda_init(void)
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");

View File

@ -24,6 +24,7 @@
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
@ -45,7 +46,6 @@
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <mach/gpio.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
@ -65,8 +65,6 @@
#define OVERO_GPIO_USBH_CPEN 168
#define OVERO_GPIO_USBH_NRESET 183
#define NAND_BLOCK_SIZE SZ_128K
#define OVERO_SMSC911X_CS 5
#define OVERO_SMSC911X_GPIO 176
#define OVERO_SMSC911X2_CS 4

View File

@ -488,6 +488,7 @@ static struct regulator_init_data rx51_vmmc2 = {
.name = "V28_A",
.min_uV = 2800000,
.max_uV = 3000000,
.always_on = true, /* due VIO leak to AIC34 VDDs */
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
@ -582,7 +583,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
{
/* FIXME this gpio setup is just a placeholder for now */
gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
return 0;
}

View File

@ -26,7 +26,7 @@ static struct gpio zoom_lcd_gpios[] __initdata = {
{ LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
};
static void zoom_lcd_panel_init(void)
static void __init zoom_lcd_panel_init(void)
{
zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :

View File

@ -85,18 +85,18 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
struct spi_board_info *spi_bi = &ads7846_spi_board_info;
int err;
err = gpio_request(gpio_pendown, "TS PenDown");
if (err) {
pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
return;
if (board_pdata && board_pdata->get_pendown_state) {
err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
if (err) {
pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
return;
}
gpio_export(gpio_pendown, 0);
if (gpio_debounce)
gpio_set_debounce(gpio_pendown, gpio_debounce);
}
gpio_direction_input(gpio_pendown);
gpio_export(gpio_pendown, 0);
if (gpio_debounce)
gpio_set_debounce(gpio_pendown, gpio_debounce);
ads7846_config.gpio_pendown = gpio_pendown;
spi_bi->bus_num = bus_num;

View File

@ -1,6 +1,8 @@
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
#define NAND_BLOCK_SIZE SZ_128K
struct twl4030_platform_data;
struct mtd_partition;

View File

@ -97,7 +97,7 @@ static int __init omap4_l3_init(void)
WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
return PTR_ERR(od);
return IS_ERR(od) ? PTR_ERR(od) : 0;
}
postcore_initcall(omap4_l3_init);

View File

@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
u32 reg;
unsigned long timeout;
if (power_on) {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
@ -157,9 +158,15 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
OMAP4_MMC1_PWRDNZ_MASK |
OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
omap4_ctrl_pad_writel(reg, control_pbias_offset);
/* 4 microsec delay for comparator to generate an error*/
udelay(4);
reg = omap4_ctrl_pad_readl(control_pbias_offset);
timeout = jiffies + msecs_to_jiffies(5);
do {
reg = omap4_ctrl_pad_readl(control_pbias_offset);
if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
break;
usleep_range(100, 200);
} while (!time_after(jiffies, timeout));
if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
pr_err("Pbias Voltage is not same as LDO\n");
/* Caution : On VMODE_ERROR Power Down MMC IO */
@ -331,6 +338,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
if (c->no_off)
mmc->slots[0].no_off = 1;
if (c->no_off_init)
mmc->slots[0].no_regulator_off_init = c->no_off_init;
if (c->vcc_aux_disable_is_sleep)
mmc->slots[0].vcc_aux_disable_is_sleep = 1;

View File

@ -18,6 +18,7 @@ struct omap2_hsmmc_info {
bool nonremovable; /* Nonremovable e.g. eMMC */
bool power_saving; /* Try to sleep or power off when possible */
bool no_off; /* power_saving and power is not to go off */
bool no_off_init; /* no power off when not in MMC sleep state */
bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */

View File

@ -83,6 +83,9 @@ void omap_mux_write(struct omap_mux_partition *partition, u16 val,
void omap_mux_write_array(struct omap_mux_partition *partition,
struct omap_board_mux *board_mux)
{
if (!board_mux)
return;
while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
omap_mux_write(partition, board_mux->value,
board_mux->reg_offset);
@ -906,7 +909,7 @@ static struct omap_mux *omap_mux_get_by_gpio(
u16 omap_mux_get_gpio(int gpio)
{
struct omap_mux_partition *partition;
struct omap_mux *m;
struct omap_mux *m = NULL;
list_for_each_entry(partition, &mux_partitions, node) {
m = omap_mux_get_by_gpio(partition, gpio);

View File

@ -323,10 +323,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
/**
* omap4_mux_init() - initialize mux system with board specific set
* @board_mux: Board specific mux table
* @board_subset: Board specific mux table
* @board_wkup_subset: Board specific mux table for wakeup instance
* @flags: OMAP package type used for the board
*/
int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
int omap4_mux_init(struct omap_board_mux *board_subset,
struct omap_board_mux *board_wkup_subset, int flags);
/**
* omap_mux_init - private mux init function, do not call

View File

@ -1309,7 +1309,8 @@ static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
#define omap4_wkup_cbl_cbs_ball NULL
#endif
int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
int __init omap4_mux_init(struct omap_board_mux *board_subset,
struct omap_board_mux *board_wkup_subset, int flags)
{
struct omap_ball *package_balls_core;
struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
@ -1347,7 +1348,7 @@ int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
OMAP_MUX_GPIO_IN_MODE3,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
omap4_wkup_muxmodes, NULL, board_subset,
omap4_wkup_muxmodes, NULL, board_wkup_subset,
package_balls_wkup);
return ret;

View File

@ -1628,7 +1628,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data)
{
struct omap_hwmod *temp_oh;
int ret;
int ret = 0;
if (!fn)
return -EINVAL;

View File

@ -5109,7 +5109,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
&omap44xx_iva_seq1_hwmod,
/* kbd class */
/* &omap44xx_kbd_hwmod, */
&omap44xx_kbd_hwmod,
/* mailbox class */
&omap44xx_mailbox_hwmod,

View File

@ -56,8 +56,10 @@ int omap4430_phy_init(struct device *dev)
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
if (!dev)
if (!dev) {
iounmap(ctrl_base);
return 0;
}
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
if (IS_ERR(phyclk)) {

View File

@ -10,7 +10,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_CPU_S3C2410) += irq.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o

View File

@ -1,34 +0,0 @@
/* linux/arch/arm/mach-s3c2410/irq.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
#include <plat/cpu.h>
#include <plat/pm.h>
struct syscore_ops s3c24xx_irq_syscore_ops = {
.suspend = s3c24xx_irq_suspend,
.resume = s3c24xx_irq_resume,
};

View File

@ -101,12 +101,14 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
unsigned long tmp, tmp1;
void __iomem *reg = NULL;
if (ch == DMC0)
if (ch == DMC0) {
reg = (S5P_VA_DMC0 + 0x30);
else if (ch == DMC1)
} else if (ch == DMC1) {
reg = (S5P_VA_DMC1 + 0x30);
else
} else {
printk(KERN_ERR "Cannot find DMC port\n");
return;
}
/* Find current DRAM frequency */
tmp = s5pv210_dram_conf[ch].freq;

View File

@ -159,6 +159,9 @@ static void __init db8500_add_gpios(void)
/* No custom data yet */
};
if (cpu_is_u8500v2())
pdata.supports_sleepmode = true;
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}

View File

@ -90,6 +90,7 @@ struct nmk_gpio_platform_data {
int num_gpio;
u32 (*get_secondary_status)(unsigned int bank);
void (*set_ioforce)(bool enable);
bool supports_sleepmode;
};
#endif /* __ASM_PLAT_GPIO_H */

View File

@ -11,6 +11,7 @@
#include <linux/mtd/map.h>
struct platform_device;
extern void omap1_set_vpp(struct platform_device *pdev, int enable);
#endif

View File

@ -29,9 +29,6 @@ struct iovm_struct {
* lower 16 bit is used for h/w and upper 16 bit is for s/w.
*/
#define IOVMF_SW_SHIFT 16
#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
/*
* iovma: h/w flags derived from cam and ram attribute

View File

@ -101,6 +101,9 @@ struct omap_mmc_platform_data {
/* If using power_saving and the MMC power is not to go off */
unsigned no_off:1;
/* eMMC does not handle power off when not in sleep state */
unsigned no_regulator_off_init:1;
/* Regulator off remapped to sleep */
unsigned vcc_aux_disable_is_sleep:1;

View File

@ -648,7 +648,6 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
return PTR_ERR(va);
}
flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_MMIO;
@ -706,7 +705,6 @@ u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
if (!va)
return -ENOMEM;
flags &= IOVMF_HW_MASK;
flags |= IOVMF_DISCONT;
flags |= IOVMF_ALLOC;
@ -795,7 +793,6 @@ u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
if (!va)
return -ENOMEM;
flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_MMIO;
@ -853,7 +850,6 @@ u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
return -ENOMEM;
pa = virt_to_phys(va);
flags &= IOVMF_HW_MASK;
flags |= IOVMF_LINEAR;
flags |= IOVMF_ALLOC;

View File

@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
else if (cpu_is_omap1611())
omap_sram_size = SZ_256K;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
}
@ -221,10 +221,10 @@ static void __init omap_map_sram(void)
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
__pfn_to_phys(omap_sram_io_desc[0].pfn),
omap_sram_io_desc[0].virtual,
omap_sram_io_desc[0].length);
pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
(long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
omap_sram_io_desc[0].virtual,
omap_sram_io_desc[0].length);
/*
* Normally devicemaps_init() would flush caches and tlb after
@ -252,7 +252,7 @@ static void __init omap_map_sram(void)
void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
printk(KERN_ERR "Not enough space in SRAM\n");
pr_err("Not enough space in SRAM\n");
return NULL;
}

View File

@ -1199,7 +1199,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
#ifdef CONFIG_PM
static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
{
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);

View File

@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/sysdev.h>
#include <linux/syscore_ops.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@ -668,3 +669,8 @@ void __init s3c24xx_init_irq(void)
irqdbf("s3c2410: registered interrupt handlers\n");
}
struct syscore_ops s3c24xx_irq_syscore_ops = {
.suspend = s3c24xx_irq_suspend,
.resume = s3c24xx_irq_resume,
};

View File

@ -15,8 +15,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
@ -45,13 +43,3 @@ struct platform_device s5p_device_onenand = {
.num_resources = ARRAY_SIZE(s5p_onenand_resources),
.resource = s5p_onenand_resources,
};
void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
{
struct onenand_platform_data *pd;
pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
if (!pd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
s5p_device_onenand.dev.platform_data = pd;
}

View File

@ -39,7 +39,7 @@
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000)
#define S5P_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)

View File

@ -13,8 +13,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
@ -43,13 +41,3 @@ struct platform_device s3c_device_onenand = {
.num_resources = ARRAY_SIZE(s3c_onenand_resources),
.resource = s3c_onenand_resources,
};
void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
{
struct onenand_platform_data *pd;
pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
if (!pd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
s3c_device_onenand.dev.platform_data = pd;
}

View File

@ -75,10 +75,8 @@ extern struct platform_device s5pc100_device_spi1;
extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_spi0;
extern struct platform_device s5pv210_device_spi1;
extern struct platform_device s5p6440_device_spi0;
extern struct platform_device s5p6440_device_spi1;
extern struct platform_device s5p6450_device_spi0;
extern struct platform_device s5p6450_device_spi1;
extern struct platform_device s5p64x0_device_spi0;
extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s3c_device_hwmon;

View File

@ -28,7 +28,7 @@
#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/smp.h>
@ -156,7 +156,7 @@ int die_if_no_fixup(const char *str, struct pt_regs *regs,
case EXCEP_TRAP:
case EXCEP_UNIMPINS:
if (get_user(opcode, (uint8_t __user *)regs->pc) != 0)
if (probe_kernel_read(&opcode, (u8 *)regs->pc, 1) < 0)
break;
if (opcode == 0xff) {
if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))

View File

@ -44,6 +44,7 @@ SECTIONS
RO_DATA(PAGE_SIZE)
/* writeable */
_sdata = .; /* Start of rw data section */
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .;

View File

@ -120,14 +120,14 @@ debugger_local_cache_flushinv_one:
# conditionally purge this line in all ways
mov d1,(L1_CACHE_WAYDISP*0,a0)
debugger_local_cache_flushinv_no_dcache:
debugger_local_cache_flushinv_one_no_dcache:
#
# now try to flush the icache
#
mov CHCTR,a0
movhu (a0),d0
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_range_reg_end
beq debugger_local_cache_flushinv_one_end
LOCAL_CLI_SAVE(d1)

View File

@ -1,5 +1,4 @@
addnote
dtc
empty.c
hack-coff
infblock.c

View File

@ -1,3 +0,0 @@
dtc-lexer.lex.c
dtc-parser.tab.c
dtc-parser.tab.h

View File

@ -14,7 +14,7 @@
#define ASM_PPC_RIO_H
extern void platform_rio_init(void);
#ifdef CONFIG_RAPIDIO
#ifdef CONFIG_FSL_RIO
extern int fsl_rio_mcheck_exception(struct pt_regs *);
#else
static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; }

View File

@ -1979,7 +1979,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_value = 0x80240000,
.cpu_name = "e5500",
.cpu_features = CPU_FTRS_E5500,
.cpu_user_features = COMMON_USER_BOOKE,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS |
MMU_FTR_USE_TLBILX,
.icache_bsize = 64,

View File

@ -82,11 +82,29 @@ static int __init early_parse_mem(char *p)
}
early_param("mem", early_parse_mem);
/*
* overlaps_initrd - check for overlap with page aligned extension of
* initrd.
*/
static inline int overlaps_initrd(unsigned long start, unsigned long size)
{
#ifdef CONFIG_BLK_DEV_INITRD
if (!initrd_start)
return 0;
return (start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
#else
return 0;
#endif
}
/**
* move_device_tree - move tree to an unused area, if needed.
*
* The device tree may be allocated beyond our memory limit, or inside the
* crash kernel region for kdump. If so, move it out of the way.
* crash kernel region for kdump, or within the page aligned range of initrd.
* If so, move it out of the way.
*/
static void __init move_device_tree(void)
{
@ -99,7 +117,8 @@ static void __init move_device_tree(void)
size = be32_to_cpu(initial_boot_params->totalsize);
if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
overlaps_crashkernel(start, size)) {
overlaps_crashkernel(start, size) ||
overlaps_initrd(start, size)) {
p = __va(memblock_alloc(size, PAGE_SIZE));
memcpy(p, initial_boot_params, size);
initial_boot_params = (struct boot_param_header *)p;
@ -555,7 +574,9 @@ static void __init early_reserve_mem(void)
#ifdef CONFIG_BLK_DEV_INITRD
/* then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start))
memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
_ALIGN_UP(initrd_end, PAGE_SIZE) -
_ALIGN_DOWN(initrd_start, PAGE_SIZE));
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC32

View File

@ -223,21 +223,6 @@ void free_initmem(void)
#undef FREESEC
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (start < end)
printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
free_page(start);
totalram_pages++;
}
}
#endif
#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
void setup_initial_memory_limit(phys_addr_t first_memblock_base,
phys_addr_t first_memblock_size)

View File

@ -99,20 +99,6 @@ void free_initmem(void)
((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
if (start < end)
printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
free_page(start);
totalram_pages++;
}
}
#endif
static void pgd_ctor(void *addr)
{
memset(addr, 0, PGD_TABLE_SIZE);

View File

@ -382,6 +382,25 @@ void __init mem_init(void)
mem_init_done = 1;
}
#ifdef CONFIG_BLK_DEV_INITRD
void __init free_initrd_mem(unsigned long start, unsigned long end)
{
if (start >= end)
return;
start = _ALIGN_DOWN(start, PAGE_SIZE);
end = _ALIGN_UP(end, PAGE_SIZE);
pr_info("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
ClearPageReserved(virt_to_page(start));
init_page_count(virt_to_page(start));
free_page(start);
totalram_pages++;
}
}
#endif
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache

View File

@ -196,9 +196,6 @@ static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl,
out_be32(&lbc->lteccr, LTECCR_CLEAR);
out_be32(&lbc->ltedr, LTEDR_ENABLE);
/* Enable interrupts for any detected events */
out_be32(&lbc->lteir, LTEIR_ENABLE);
/* Set the monitor timeout value to the maximum for erratum A001 */
if (of_device_is_compatible(node, "fsl,elbc"))
clrsetbits_be32(&lbc->lbcr, LBCR_BMT, LBCR_BMTPS);
@ -322,6 +319,9 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev)
goto err;
}
/* Enable interrupts for any detected events */
out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE);
return 0;
err:

View File

@ -89,6 +89,7 @@ config S390
select HAVE_GET_USER_PAGES_FAST
select HAVE_ARCH_MUTEX_CPU_RELAX
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select HAVE_RCU_TABLE_FREE if SMP
select ARCH_INLINE_SPIN_TRYLOCK
select ARCH_INLINE_SPIN_TRYLOCK_BH
select ARCH_INLINE_SPIN_LOCK

View File

@ -17,15 +17,15 @@
#include <linux/gfp.h>
#include <linux/mm.h>
#define check_pgt_cache() do {} while (0)
unsigned long *crst_table_alloc(struct mm_struct *);
void crst_table_free(struct mm_struct *, unsigned long *);
void crst_table_free_rcu(struct mm_struct *, unsigned long *);
unsigned long *page_table_alloc(struct mm_struct *);
void page_table_free(struct mm_struct *, unsigned long *);
void page_table_free_rcu(struct mm_struct *, unsigned long *);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
void page_table_free_rcu(struct mmu_gather *, unsigned long *);
void __tlb_remove_table(void *_table);
#endif
static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
{

View File

@ -293,19 +293,6 @@ extern unsigned long VMALLOC_START;
* swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
*/
/* Page status table bits for virtualization */
#define RCP_ACC_BITS 0xf000000000000000UL
#define RCP_FP_BIT 0x0800000000000000UL
#define RCP_PCL_BIT 0x0080000000000000UL
#define RCP_HR_BIT 0x0040000000000000UL
#define RCP_HC_BIT 0x0020000000000000UL
#define RCP_GR_BIT 0x0004000000000000UL
#define RCP_GC_BIT 0x0002000000000000UL
/* User dirty / referenced bit for KVM's migration feature */
#define KVM_UR_BIT 0x0000800000000000UL
#define KVM_UC_BIT 0x0000400000000000UL
#ifndef __s390x__
/* Bits in the segment table address-space-control-element */
@ -325,6 +312,19 @@ extern unsigned long VMALLOC_START;
#define _SEGMENT_ENTRY (_SEGMENT_ENTRY_PTL)
#define _SEGMENT_ENTRY_EMPTY (_SEGMENT_ENTRY_INV)
/* Page status table bits for virtualization */
#define RCP_ACC_BITS 0xf0000000UL
#define RCP_FP_BIT 0x08000000UL
#define RCP_PCL_BIT 0x00800000UL
#define RCP_HR_BIT 0x00400000UL
#define RCP_HC_BIT 0x00200000UL
#define RCP_GR_BIT 0x00040000UL
#define RCP_GC_BIT 0x00020000UL
/* User dirty / referenced bit for KVM's migration feature */
#define KVM_UR_BIT 0x00008000UL
#define KVM_UC_BIT 0x00004000UL
#else /* __s390x__ */
/* Bits in the segment/region table address-space-control-element */
@ -367,6 +367,19 @@ extern unsigned long VMALLOC_START;
#define _SEGMENT_ENTRY_LARGE 0x400 /* STE-format control, large page */
#define _SEGMENT_ENTRY_CO 0x100 /* change-recording override */
/* Page status table bits for virtualization */
#define RCP_ACC_BITS 0xf000000000000000UL
#define RCP_FP_BIT 0x0800000000000000UL
#define RCP_PCL_BIT 0x0080000000000000UL
#define RCP_HR_BIT 0x0040000000000000UL
#define RCP_HC_BIT 0x0020000000000000UL
#define RCP_GR_BIT 0x0004000000000000UL
#define RCP_GC_BIT 0x0002000000000000UL
/* User dirty / referenced bit for KVM's migration feature */
#define KVM_UR_BIT 0x0000800000000000UL
#define KVM_UC_BIT 0x0000400000000000UL
#endif /* __s390x__ */
/*

View File

@ -139,110 +139,47 @@ struct slib {
struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
} __attribute__ ((packed, aligned(2048)));
/**
* struct sbal_flags - storage block address list flags
* @last: last entry
* @cont: contiguous storage
* @frag: fragmentation
*/
struct sbal_flags {
u8 : 1;
u8 last : 1;
u8 cont : 1;
u8 : 1;
u8 frag : 2;
u8 : 2;
} __attribute__ ((packed));
#define SBAL_EFLAGS_LAST_ENTRY 0x40
#define SBAL_EFLAGS_CONTIGUOUS 0x20
#define SBAL_EFLAGS_FIRST_FRAG 0x04
#define SBAL_EFLAGS_MIDDLE_FRAG 0x08
#define SBAL_EFLAGS_LAST_FRAG 0x0c
#define SBAL_EFLAGS_MASK 0x6f
#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL
#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL
#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL
#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL
#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL
#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL
#define SBAL_SFLAGS0_PCI_REQ 0x40
#define SBAL_SFLAGS0_DATA_CONTINUATION 0x20
/* Awesome OpenFCP extensions */
#define SBAL_FLAGS0_TYPE_STATUS 0x00UL
#define SBAL_FLAGS0_TYPE_WRITE 0x08UL
#define SBAL_FLAGS0_TYPE_READ 0x10UL
#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL
#define SBAL_FLAGS0_MORE_SBALS 0x04UL
#define SBAL_FLAGS0_COMMAND 0x02UL
#define SBAL_FLAGS0_LAST_SBAL 0x00UL
#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND
#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS
#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
#define SBAL_FLAGS0_PCI 0x40
/**
* struct sbal_sbalf_0 - sbal flags for sbale 0
* @pci: PCI indicator
* @cont: data continuation
* @sbtype: storage-block type (FCP)
*/
struct sbal_sbalf_0 {
u8 : 1;
u8 pci : 1;
u8 cont : 1;
u8 sbtype : 2;
u8 : 3;
} __attribute__ ((packed));
/**
* struct sbal_sbalf_1 - sbal flags for sbale 1
* @key: storage key
*/
struct sbal_sbalf_1 {
u8 : 4;
u8 key : 4;
} __attribute__ ((packed));
/**
* struct sbal_sbalf_14 - sbal flags for sbale 14
* @erridx: error index
*/
struct sbal_sbalf_14 {
u8 : 4;
u8 erridx : 4;
} __attribute__ ((packed));
/**
* struct sbal_sbalf_15 - sbal flags for sbale 15
* @reason: reason for error state
*/
struct sbal_sbalf_15 {
u8 reason;
} __attribute__ ((packed));
/**
* union sbal_sbalf - storage block address list flags
* @i0: sbalf0
* @i1: sbalf1
* @i14: sbalf14
* @i15: sblaf15
* @value: raw value
*/
union sbal_sbalf {
struct sbal_sbalf_0 i0;
struct sbal_sbalf_1 i1;
struct sbal_sbalf_14 i14;
struct sbal_sbalf_15 i15;
u8 value;
};
#define SBAL_SFLAGS0_TYPE_STATUS 0x00
#define SBAL_SFLAGS0_TYPE_WRITE 0x08
#define SBAL_SFLAGS0_TYPE_READ 0x10
#define SBAL_SFLAGS0_TYPE_WRITE_READ 0x18
#define SBAL_SFLAGS0_MORE_SBALS 0x04
#define SBAL_SFLAGS0_COMMAND 0x02
#define SBAL_SFLAGS0_LAST_SBAL 0x00
#define SBAL_SFLAGS0_ONLY_SBAL SBAL_SFLAGS0_COMMAND
#define SBAL_SFLAGS0_MIDDLE_SBAL SBAL_SFLAGS0_MORE_SBALS
#define SBAL_SFLAGS0_FIRST_SBAL (SBAL_SFLAGS0_MORE_SBALS | SBAL_SFLAGS0_COMMAND)
/**
* struct qdio_buffer_element - SBAL entry
* @flags: flags
* @eflags: SBAL entry flags
* @scount: SBAL count
* @sflags: whole SBAL flags
* @length: length
* @addr: address
*/
struct qdio_buffer_element {
u32 flags;
u8 eflags;
/* private: */
u8 res1;
/* public: */
u8 scount;
u8 sflags;
u32 length;
#ifdef CONFIG_32BIT
/* private: */
void *reserved;
void *res2;
/* public: */
#endif
void *addr;

View File

@ -26,67 +26,60 @@
#include <linux/swap.h>
#include <asm/processor.h>
#include <asm/pgalloc.h>
#include <asm/smp.h>
#include <asm/tlbflush.h>
struct mmu_gather {
struct mm_struct *mm;
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch *batch;
#endif
unsigned int fullmm;
unsigned int nr_ptes;
unsigned int nr_pxds;
unsigned int max;
void **array;
void *local[8];
unsigned int need_flush;
};
static inline void __tlb_alloc_page(struct mmu_gather *tlb)
{
unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
struct mmu_table_batch {
struct rcu_head rcu;
unsigned int nr;
void *tables[0];
};
if (addr) {
tlb->array = (void *) addr;
tlb->max = PAGE_SIZE / sizeof(void *);
}
}
#define MAX_TABLE_BATCH \
((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *))
extern void tlb_table_flush(struct mmu_gather *tlb);
extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
#endif
static inline void tlb_gather_mmu(struct mmu_gather *tlb,
struct mm_struct *mm,
unsigned int full_mm_flush)
{
tlb->mm = mm;
tlb->max = ARRAY_SIZE(tlb->local);
tlb->array = tlb->local;
tlb->fullmm = full_mm_flush;
tlb->need_flush = 0;
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb->batch = NULL;
#endif
if (tlb->fullmm)
__tlb_flush_mm(mm);
else
__tlb_alloc_page(tlb);
tlb->nr_ptes = 0;
tlb->nr_pxds = tlb->max;
}
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < tlb->max))
__tlb_flush_mm(tlb->mm);
while (tlb->nr_ptes > 0)
page_table_free_rcu(tlb->mm, tlb->array[--tlb->nr_ptes]);
while (tlb->nr_pxds < tlb->max)
crst_table_free_rcu(tlb->mm, tlb->array[tlb->nr_pxds++]);
if (!tlb->need_flush)
return;
tlb->need_flush = 0;
__tlb_flush_mm(tlb->mm);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb_table_flush(tlb);
#endif
}
static inline void tlb_finish_mmu(struct mmu_gather *tlb,
unsigned long start, unsigned long end)
{
tlb_flush_mmu(tlb);
rcu_table_freelist_finish();
/* keep the page table cache within bounds */
check_pgt_cache();
if (tlb->array != tlb->local)
free_pages((unsigned long) tlb->array, 0);
}
/*
@ -112,12 +105,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long address)
{
if (!tlb->fullmm) {
tlb->array[tlb->nr_ptes++] = pte;
if (tlb->nr_ptes >= tlb->nr_pxds)
tlb_flush_mmu(tlb);
} else
page_table_free(tlb->mm, (unsigned long *) pte);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return page_table_free_rcu(tlb, (unsigned long *) pte);
#endif
page_table_free(tlb->mm, (unsigned long *) pte);
}
/*
@ -133,12 +125,11 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 31))
return;
if (!tlb->fullmm) {
tlb->array[--tlb->nr_pxds] = pmd;
if (tlb->nr_ptes >= tlb->nr_pxds)
tlb_flush_mmu(tlb);
} else
crst_table_free(tlb->mm, (unsigned long *) pmd);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return tlb_remove_table(tlb, pmd);
#endif
crst_table_free(tlb->mm, (unsigned long *) pmd);
#endif
}
@ -155,12 +146,11 @@ static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
#ifdef __s390x__
if (tlb->mm->context.asce_limit <= (1UL << 42))
return;
if (!tlb->fullmm) {
tlb->array[--tlb->nr_pxds] = pud;
if (tlb->nr_ptes >= tlb->nr_pxds)
tlb_flush_mmu(tlb);
} else
crst_table_free(tlb->mm, (unsigned long *) pud);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
if (!tlb->fullmm)
return tlb_remove_table(tlb, pud);
#endif
crst_table_free(tlb->mm, (unsigned long *) pud);
#endif
}

View File

@ -731,6 +731,7 @@ static int __init kvm_s390_init(void)
}
memcpy(facilities, S390_lowcore.stfle_fac_list, 16);
facilities[0] &= 0xff00fff3f47c0000ULL;
facilities[1] &= 0x201c000000000000ULL;
return 0;
}

View File

@ -93,4 +93,6 @@ sie_err:
.section __ex_table,"a"
.quad sie_inst,sie_err
.quad sie_exit,sie_err
.quad sie_reenter,sie_err
.previous

View File

@ -24,94 +24,12 @@
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
struct rcu_table_freelist {
struct rcu_head rcu;
struct mm_struct *mm;
unsigned int pgt_index;
unsigned int crst_index;
unsigned long *table[0];
};
#define RCU_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct rcu_table_freelist)) \
/ sizeof(unsigned long))
static DEFINE_PER_CPU(struct rcu_table_freelist *, rcu_table_freelist);
static void __page_table_free(struct mm_struct *mm, unsigned long *table);
static struct rcu_table_freelist *rcu_table_freelist_get(struct mm_struct *mm)
{
struct rcu_table_freelist **batchp = &__get_cpu_var(rcu_table_freelist);
struct rcu_table_freelist *batch = *batchp;
if (batch)
return batch;
batch = (struct rcu_table_freelist *) __get_free_page(GFP_ATOMIC);
if (batch) {
batch->mm = mm;
batch->pgt_index = 0;
batch->crst_index = RCU_FREELIST_SIZE;
*batchp = batch;
}
return batch;
}
static void rcu_table_freelist_callback(struct rcu_head *head)
{
struct rcu_table_freelist *batch =
container_of(head, struct rcu_table_freelist, rcu);
while (batch->pgt_index > 0)
__page_table_free(batch->mm, batch->table[--batch->pgt_index]);
while (batch->crst_index < RCU_FREELIST_SIZE)
crst_table_free(batch->mm, batch->table[batch->crst_index++]);
free_page((unsigned long) batch);
}
void rcu_table_freelist_finish(void)
{
struct rcu_table_freelist **batchp = &get_cpu_var(rcu_table_freelist);
struct rcu_table_freelist *batch = *batchp;
if (!batch)
goto out;
call_rcu(&batch->rcu, rcu_table_freelist_callback);
*batchp = NULL;
out:
put_cpu_var(rcu_table_freelist);
}
static void smp_sync(void *arg)
{
}
#ifndef CONFIG_64BIT
#define ALLOC_ORDER 1
#define TABLES_PER_PAGE 4
#define FRAG_MASK 15UL
#define SECOND_HALVES 10UL
void clear_table_pgstes(unsigned long *table)
{
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/4);
memset(table + 256, 0, PAGE_SIZE/4);
clear_table(table + 512, _PAGE_TYPE_EMPTY, PAGE_SIZE/4);
memset(table + 768, 0, PAGE_SIZE/4);
}
#define FRAG_MASK 0x0f
#else
#define ALLOC_ORDER 2
#define TABLES_PER_PAGE 2
#define FRAG_MASK 3UL
#define SECOND_HALVES 2UL
void clear_table_pgstes(unsigned long *table)
{
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
memset(table + 256, 0, PAGE_SIZE/2);
}
#define FRAG_MASK 0x03
#endif
unsigned long VMALLOC_START = VMALLOC_END - VMALLOC_SIZE;
@ -140,29 +58,6 @@ void crst_table_free(struct mm_struct *mm, unsigned long *table)
free_pages((unsigned long) table, ALLOC_ORDER);
}
void crst_table_free_rcu(struct mm_struct *mm, unsigned long *table)
{
struct rcu_table_freelist *batch;
preempt_disable();
if (atomic_read(&mm->mm_users) < 2 &&
cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
crst_table_free(mm, table);
goto out;
}
batch = rcu_table_freelist_get(mm);
if (!batch) {
smp_call_function(smp_sync, NULL, 1);
crst_table_free(mm, table);
goto out;
}
batch->table[--batch->crst_index] = table;
if (batch->pgt_index >= batch->crst_index)
rcu_table_freelist_finish();
out:
preempt_enable();
}
#ifdef CONFIG_64BIT
int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
{
@ -238,124 +133,175 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
}
#endif
static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
{
unsigned int old, new;
do {
old = atomic_read(v);
new = old ^ bits;
} while (atomic_cmpxchg(v, old, new) != old);
return new;
}
/*
* page table entry allocation/free routines.
*/
#ifdef CONFIG_PGSTE
static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm)
{
struct page *page;
unsigned long *table;
page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
if (!page)
return NULL;
pgtable_page_ctor(page);
atomic_set(&page->_mapcount, 3);
table = (unsigned long *) page_to_phys(page);
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE/2);
clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2);
return table;
}
static inline void page_table_free_pgste(unsigned long *table)
{
struct page *page;
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
pgtable_page_ctor(page);
atomic_set(&page->_mapcount, -1);
__free_page(page);
}
#endif
unsigned long *page_table_alloc(struct mm_struct *mm)
{
struct page *page;
unsigned long *table;
unsigned long bits;
unsigned int mask, bit;
bits = (mm->context.has_pgste) ? 3UL : 1UL;
#ifdef CONFIG_PGSTE
if (mm_has_pgste(mm))
return page_table_alloc_pgste(mm);
#endif
/* Allocate fragments of a 4K page as 1K/2K page table */
spin_lock_bh(&mm->context.list_lock);
page = NULL;
mask = FRAG_MASK;
if (!list_empty(&mm->context.pgtable_list)) {
page = list_first_entry(&mm->context.pgtable_list,
struct page, lru);
if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
page = NULL;
table = (unsigned long *) page_to_phys(page);
mask = atomic_read(&page->_mapcount);
mask = mask | (mask >> 4);
}
if (!page) {
if ((mask & FRAG_MASK) == FRAG_MASK) {
spin_unlock_bh(&mm->context.list_lock);
page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
if (!page)
return NULL;
pgtable_page_ctor(page);
page->flags &= ~FRAG_MASK;
atomic_set(&page->_mapcount, 1);
table = (unsigned long *) page_to_phys(page);
if (mm->context.has_pgste)
clear_table_pgstes(table);
else
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
spin_lock_bh(&mm->context.list_lock);
list_add(&page->lru, &mm->context.pgtable_list);
} else {
for (bit = 1; mask & bit; bit <<= 1)
table += PTRS_PER_PTE;
mask = atomic_xor_bits(&page->_mapcount, bit);
if ((mask & FRAG_MASK) == FRAG_MASK)
list_del(&page->lru);
}
table = (unsigned long *) page_to_phys(page);
while (page->flags & bits) {
table += 256;
bits <<= 1;
}
page->flags |= bits;
if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
list_move_tail(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
return table;
}
static void __page_table_free(struct mm_struct *mm, unsigned long *table)
{
struct page *page;
unsigned long bits;
bits = ((unsigned long) table) & 15;
table = (unsigned long *)(((unsigned long) table) ^ bits);
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
page->flags ^= bits;
if (!(page->flags & FRAG_MASK)) {
pgtable_page_dtor(page);
__free_page(page);
}
}
void page_table_free(struct mm_struct *mm, unsigned long *table)
{
struct page *page;
unsigned long bits;
unsigned int bit, mask;
bits = (mm->context.has_pgste) ? 3UL : 1UL;
bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
#ifdef CONFIG_PGSTE
if (mm_has_pgste(mm))
return page_table_free_pgste(table);
#endif
/* Free 1K/2K page table fragment of a 4K page */
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
bit = 1 << ((__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t)));
spin_lock_bh(&mm->context.list_lock);
page->flags ^= bits;
if (page->flags & FRAG_MASK) {
/* Page now has some free pgtable fragments. */
if (!list_empty(&page->lru))
list_move(&page->lru, &mm->context.pgtable_list);
page = NULL;
} else
/* All fragments of the 4K page have been freed. */
if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
list_del(&page->lru);
mask = atomic_xor_bits(&page->_mapcount, bit);
if (mask & FRAG_MASK)
list_add(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
if (page) {
if (mask == 0) {
pgtable_page_dtor(page);
atomic_set(&page->_mapcount, -1);
__free_page(page);
}
}
void page_table_free_rcu(struct mm_struct *mm, unsigned long *table)
{
struct rcu_table_freelist *batch;
struct page *page;
unsigned long bits;
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
preempt_disable();
if (atomic_read(&mm->mm_users) < 2 &&
cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
page_table_free(mm, table);
goto out;
static void __page_table_free_rcu(void *table, unsigned bit)
{
struct page *page;
#ifdef CONFIG_PGSTE
if (bit == FRAG_MASK)
return page_table_free_pgste(table);
#endif
/* Free 1K/2K page table fragment of a 4K page */
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
if (atomic_xor_bits(&page->_mapcount, bit) == 0) {
pgtable_page_dtor(page);
atomic_set(&page->_mapcount, -1);
__free_page(page);
}
batch = rcu_table_freelist_get(mm);
if (!batch) {
smp_call_function(smp_sync, NULL, 1);
page_table_free(mm, table);
goto out;
}
void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table)
{
struct mm_struct *mm;
struct page *page;
unsigned int bit, mask;
mm = tlb->mm;
#ifdef CONFIG_PGSTE
if (mm_has_pgste(mm)) {
table = (unsigned long *) (__pa(table) | FRAG_MASK);
tlb_remove_table(tlb, table);
return;
}
bits = (mm->context.has_pgste) ? 3UL : 1UL;
bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
#endif
bit = 1 << ((__pa(table) & ~PAGE_MASK) / (PTRS_PER_PTE*sizeof(pte_t)));
page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
spin_lock_bh(&mm->context.list_lock);
/* Delayed freeing with rcu prevents reuse of pgtable fragments */
list_del_init(&page->lru);
if ((atomic_read(&page->_mapcount) & FRAG_MASK) != FRAG_MASK)
list_del(&page->lru);
mask = atomic_xor_bits(&page->_mapcount, bit | (bit << 4));
if (mask & FRAG_MASK)
list_add_tail(&page->lru, &mm->context.pgtable_list);
spin_unlock_bh(&mm->context.list_lock);
table = (unsigned long *)(((unsigned long) table) | bits);
batch->table[batch->pgt_index++] = table;
if (batch->pgt_index >= batch->crst_index)
rcu_table_freelist_finish();
out:
preempt_enable();
table = (unsigned long *) (__pa(table) | (bit << 4));
tlb_remove_table(tlb, table);
}
void __tlb_remove_table(void *_table)
{
void *table = (void *)((unsigned long) _table & PAGE_MASK);
unsigned type = (unsigned long) _table & ~PAGE_MASK;
if (type)
__page_table_free_rcu(table, type);
else
free_pages((unsigned long) table, ALLOC_ORDER);
}
#endif
/*
* switch on pgstes for its userspace process (for kvm)
*/
@ -369,7 +315,7 @@ int s390_enable_sie(void)
return -EINVAL;
/* Do we have pgstes? if yes, we are done */
if (tsk->mm->context.has_pgste)
if (mm_has_pgste(tsk->mm))
return 0;
/* lets check if we are allowed to replace the mm */

View File

@ -26,7 +26,6 @@ config SPARC
select HAVE_DMA_API_DEBUG
select HAVE_ARCH_JUMP_LABEL
select HAVE_GENERIC_HARDIRQS
select GENERIC_HARDIRQS_NO_DEPRECATED
select GENERIC_IRQ_SHOW
select USE_GENERIC_SMP_HELPERS if SMP
@ -528,6 +527,23 @@ config PCI_DOMAINS
config PCI_SYSCALL
def_bool PCI
config PCIC_PCI
bool
depends on PCI && SPARC32 && !SPARC_LEON
default y
config LEON_PCI
bool
depends on PCI && SPARC_LEON
default y
config GRPCI2
bool "GRPCI2 Host Bridge Support"
depends on LEON_PCI
default y
help
Say Y here to include the GRPCI2 Host Bridge Driver.
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"

View File

@ -138,7 +138,7 @@ static unsigned char sun_82072_fd_inb(int port)
return sun_fdc->data_82072;
case 7: /* FD_DIR */
return sun_read_dir();
};
}
panic("sun_82072_fd_inb: How did I get here?");
}
@ -161,7 +161,7 @@ static void sun_82072_fd_outb(unsigned char value, int port)
case 4: /* FD_STATUS */
sun_fdc->status_82072 = value;
break;
};
}
return;
}
@ -186,7 +186,7 @@ static unsigned char sun_82077_fd_inb(int port)
return sun_fdc->data_82077;
case 7: /* FD_DIR */
return sun_read_dir();
};
}
panic("sun_82077_fd_inb: How did I get here?");
}
@ -212,7 +212,7 @@ static void sun_82077_fd_outb(unsigned char value, int port)
case 3: /* FD_TDR */
sun_fdc->tapectl_82077 = value;
break;
};
}
return;
}

View File

@ -111,7 +111,7 @@ static unsigned char sun_82077_fd_inb(unsigned long port)
case 7: /* FD_DIR */
/* XXX: Is DCL on 0x80 in sun4m? */
return sbus_readb(&sun_fdc->dir_82077);
};
}
panic("sun_82072_fd_inb: How did I get here?");
}
@ -135,7 +135,7 @@ static void sun_82077_fd_outb(unsigned char value, unsigned long port)
case 4: /* FD_STATUS */
sbus_writeb(value, &sun_fdc->status_82077);
break;
};
}
return;
}

View File

@ -318,6 +318,9 @@ struct device_node;
extern unsigned int leon_build_device_irq(unsigned int real_irq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack);
extern void leon_update_virq_handling(unsigned int virq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack);
extern void leon_clear_clock_irq(void);
extern void leon_load_profile_irq(int cpu, unsigned int limit);
extern void leon_init_timers(irq_handler_t counter_fn);

View File

@ -0,0 +1,21 @@
/*
* asm/leon_pci.h
*
* Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
*/
#ifndef _ASM_LEON_PCI_H_
#define _ASM_LEON_PCI_H_
/* PCI related definitions */
struct leon_pci_info {
struct pci_ops *ops;
struct resource io_space;
struct resource mem_space;
int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
};
extern void leon_pci_init(struct platform_device *ofdev,
struct leon_pci_info *info);
#endif /* _ASM_LEON_PCI_H_ */

View File

@ -47,7 +47,31 @@ extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
#endif /* __KERNEL__ */
#ifndef CONFIG_LEON_PCI
/* generic pci stuff */
#include <asm-generic/pci.h>
#else
/*
* On LEON PCI Memory space is mapped 1:1 with physical address space.
*
* I/O space is located at low 64Kbytes in PCI I/O space. The I/O addresses
* are converted into CPU addresses to virtual addresses that are mapped with
* MMU to the PCI Host PCI I/O space window which are translated to the low
* 64Kbytes by the Host controller.
*/
extern void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res);
extern void
pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region);
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return PCI_IRQ_NONE;
}
#endif
#endif /* __SPARC_PCI_H */

View File

@ -29,7 +29,7 @@ struct linux_pcic {
int pcic_imdim;
};
#ifdef CONFIG_PCI
#ifdef CONFIG_PCIC_PCI
extern int pcic_present(void);
extern int pcic_probe(void);
extern void pci_time_init(void);

View File

@ -220,7 +220,7 @@ static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int
switch (size) {
case 4:
return xchg_u32(ptr, x);
};
}
__xchg_called_with_bad_pointer();
return x;
}

View File

@ -234,7 +234,7 @@ static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
return xchg32(ptr, x);
case 8:
return xchg64(ptr, x);
};
}
__xchg_called_with_bad_pointer();
return x;
}

View File

@ -73,7 +73,9 @@ obj-$(CONFIG_SPARC64_SMP) += cpumap.o
obj-y += dma.o
obj-$(CONFIG_SPARC32_PCI) += pcic.o
obj-$(CONFIG_PCIC_PCI) += pcic.o
obj-$(CONFIG_LEON_PCI) += leon_pci.o
obj-$(CONFIG_GRPCI2) += leon_pci_grpci2.o
obj-$(CONFIG_SMP) += trampoline_$(BITS).o smp_$(BITS).o
obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o

View File

@ -123,7 +123,7 @@ static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
default:
return -EINVAL;
};
}
return 0;
}

View File

@ -101,7 +101,7 @@ void set_auxio(unsigned char bits_on, unsigned char bits_off)
break;
default:
panic("Can't set AUXIO register on this machine.");
};
}
spin_unlock_irqrestore(&auxio_lock, flags);
}
EXPORT_SYMBOL(set_auxio);

View File

@ -664,7 +664,7 @@ static void chmc_interpret_one_decode_reg(struct chmc *p, int which_bank, u64 va
case 0x0:
bp->interleave = 16;
break;
};
}
/* UK[10] is reserved, and UK[11] is not set for the SDRAM
* bank size definition.

View File

@ -229,7 +229,7 @@ real_irq_entry:
#ifdef CONFIG_SMP
.globl patchme_maybe_smp_msg
cmp %l7, 12
cmp %l7, 11
patchme_maybe_smp_msg:
bgu maybe_smp4m_msg
nop
@ -293,7 +293,7 @@ maybe_smp4m_msg:
WRITE_PAUSE
wr %l4, PSR_ET, %psr
WRITE_PAUSE
sll %o2, 28, %o2 ! shift for simpler checks below
sll %o3, 28, %o2 ! shift for simpler checks below
maybe_smp4m_msg_check_single:
andcc %o2, 0x1, %g0
beq,a maybe_smp4m_msg_check_mask
@ -1604,7 +1604,7 @@ restore_current:
retl
nop
#ifdef CONFIG_PCI
#ifdef CONFIG_PCIC_PCI
#include <asm/pcic.h>
.align 4
@ -1650,7 +1650,7 @@ pcic_nmi_trap_patch:
rd %psr, %l0
.word 0
#endif /* CONFIG_PCI */
#endif /* CONFIG_PCIC_PCI */
.globl flushw_all
flushw_all:

View File

@ -236,6 +236,21 @@ static unsigned int _leon_build_device_irq(struct platform_device *op,
return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0);
}
void leon_update_virq_handling(unsigned int virq,
irq_flow_handler_t flow_handler,
const char *name, int do_ack)
{
unsigned long mask = (unsigned long)irq_get_chip_data(virq);
mask &= ~LEON_DO_ACK_HW;
if (do_ack)
mask |= LEON_DO_ACK_HW;
irq_set_chip_and_handler_name(virq, &leon_irq,
flow_handler, name);
irq_set_chip_data(virq, (void *)mask);
}
void __init leon_init_timers(irq_handler_t counter_fn)
{
int irq, eirq;
@ -361,6 +376,22 @@ void __init leon_init_timers(irq_handler_t counter_fn)
prom_halt();
}
#ifdef CONFIG_SMP
{
unsigned long flags;
/*
* In SMP, sun4m adds a IPI handler to IRQ trap handler that
* LEON never must take, sun4d and LEON overwrites the branch
* with a NOP.
*/
local_irq_save(flags);
patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
local_flush_cache_all();
local_irq_restore(flags);
}
#endif
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |

View File

@ -0,0 +1,253 @@
/*
* leon_pci.c: LEON Host PCI support
*
* Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
*
* Code is partially derived from pcic.c
*/
#include <linux/of_device.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/leon.h>
#include <asm/leon_pci.h>
/* The LEON architecture does not rely on a BIOS or bootloader to setup
* PCI for us. The Linux generic routines are used to setup resources,
* reset values of confuration-space registers settings ae preseved.
*/
void leon_pci_init(struct platform_device *ofdev, struct leon_pci_info *info)
{
struct pci_bus *root_bus;
root_bus = pci_scan_bus_parented(&ofdev->dev, 0, info->ops, info);
if (root_bus) {
root_bus->resource[0] = &info->io_space;
root_bus->resource[1] = &info->mem_space;
root_bus->resource[2] = NULL;
/* Init all PCI devices into PCI tree */
pci_bus_add_devices(root_bus);
/* Setup IRQs of all devices using custom routines */
pci_fixup_irqs(pci_common_swizzle, info->map_irq);
/* Assign devices with resources */
pci_assign_unassigned_resources();
}
}
/* PCI Memory and Prefetchable Memory is direct-mapped. However I/O Space is
* accessed through a Window which is translated to low 64KB in PCI space, the
* first 4KB is not used so 60KB is available.
*
* This function is used by generic code to translate resource addresses into
* PCI addresses.
*/
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
struct leon_pci_info *info = dev->bus->sysdata;
region->start = res->start;
region->end = res->end;
if (res->flags & IORESOURCE_IO) {
region->start -= (info->io_space.start - 0x1000);
region->end -= (info->io_space.start - 0x1000);
}
}
EXPORT_SYMBOL(pcibios_resource_to_bus);
/* see pcibios_resource_to_bus() comment */
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
struct pci_bus_region *region)
{
struct leon_pci_info *info = dev->bus->sysdata;
res->start = region->start;
res->end = region->end;
if (res->flags & IORESOURCE_IO) {
res->start += (info->io_space.start - 0x1000);
res->end += (info->io_space.start - 0x1000);
}
}
EXPORT_SYMBOL(pcibios_bus_to_resource);
void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
{
struct leon_pci_info *info = pbus->sysdata;
struct pci_dev *dev;
int i, has_io, has_mem;
u16 cmd;
/* Generic PCI bus probing sets these to point at
* &io{port,mem}_resouce which is wrong for us.
*/
if (pbus->self == NULL) {
pbus->resource[0] = &info->io_space;
pbus->resource[1] = &info->mem_space;
pbus->resource[2] = NULL;
}
list_for_each_entry(dev, &pbus->devices, bus_list) {
/*
* We can not rely on that the bootloader has enabled I/O
* or memory access to PCI devices. Instead we enable it here
* if the device has BARs of respective type.
*/
has_io = has_mem = 0;
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
unsigned long f = dev->resource[i].flags;
if (f & IORESOURCE_IO)
has_io = 1;
else if (f & IORESOURCE_MEM)
has_mem = 1;
}
/* ROM BARs are mapped into 32-bit memory space */
if (dev->resource[PCI_ROM_RESOURCE].end != 0) {
dev->resource[PCI_ROM_RESOURCE].flags |=
IORESOURCE_ROM_ENABLE;
has_mem = 1;
}
pci_bus_read_config_word(pbus, dev->devfn, PCI_COMMAND, &cmd);
if (has_io && !(cmd & PCI_COMMAND_IO)) {
#ifdef CONFIG_PCI_DEBUG
printk(KERN_INFO "LEONPCI: Enabling I/O for dev %s\n",
pci_name(dev));
#endif
cmd |= PCI_COMMAND_IO;
pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND,
cmd);
}
if (has_mem && !(cmd & PCI_COMMAND_MEMORY)) {
#ifdef CONFIG_PCI_DEBUG
printk(KERN_INFO "LEONPCI: Enabling MEMORY for dev"
"%s\n", pci_name(dev));
#endif
cmd |= PCI_COMMAND_MEMORY;
pci_bus_write_config_word(pbus, dev->devfn, PCI_COMMAND,
cmd);
}
}
}
/*
* Other archs parse arguments here.
*/
char * __devinit pcibios_setup(char *str)
{
return str;
}
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
return res->start;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
return pci_enable_resources(dev, mask);
}
struct device_node *pci_device_to_OF_node(struct pci_dev *pdev)
{
/*
* Currently the OpenBoot nodes are not connected with the PCI device,
* this is because the LEON PROM does not create PCI nodes. Eventually
* this will change and the same approach as pcic.c can be used to
* match PROM nodes with pci devices.
*/
return NULL;
}
EXPORT_SYMBOL(pci_device_to_OF_node);
void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
{
#ifdef CONFIG_PCI_DEBUG
printk(KERN_DEBUG "LEONPCI: Assigning IRQ %02d to %s\n", irq,
pci_name(dev));
#endif
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
/* in/out routines taken from pcic.c
*
* This probably belongs here rather than ioport.c because
* we do not want this crud linked into SBus kernels.
* Also, think for a moment about likes of floppy.c that
* include architecture specific parts. They may want to redefine ins/outs.
*
* We do not use horrible macros here because we want to
* advance pointer by sizeof(size).
*/
void outsb(unsigned long addr, const void *src, unsigned long count)
{
while (count) {
count -= 1;
outb(*(const char *)src, addr);
src += 1;
/* addr += 1; */
}
}
EXPORT_SYMBOL(outsb);
void outsw(unsigned long addr, const void *src, unsigned long count)
{
while (count) {
count -= 2;
outw(*(const short *)src, addr);
src += 2;
/* addr += 2; */
}
}
EXPORT_SYMBOL(outsw);
void outsl(unsigned long addr, const void *src, unsigned long count)
{
while (count) {
count -= 4;
outl(*(const long *)src, addr);
src += 4;
/* addr += 4; */
}
}
EXPORT_SYMBOL(outsl);
void insb(unsigned long addr, void *dst, unsigned long count)
{
while (count) {
count -= 1;
*(unsigned char *)dst = inb(addr);
dst += 1;
/* addr += 1; */
}
}
EXPORT_SYMBOL(insb);
void insw(unsigned long addr, void *dst, unsigned long count)
{
while (count) {
count -= 2;
*(unsigned short *)dst = inw(addr);
dst += 2;
/* addr += 2; */
}
}
EXPORT_SYMBOL(insw);
void insl(unsigned long addr, void *dst, unsigned long count)
{
while (count) {
count -= 4;
/*
* XXX I am sure we are in for an unaligned trap here.
*/
*(unsigned long *)dst = inl(addr);
dst += 4;
/* addr += 4; */
}
}
EXPORT_SYMBOL(insl);

View File

@ -0,0 +1,897 @@
/*
* leon_pci_grpci2.c: GRPCI2 Host PCI driver
*
* Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
*
*/
#include <linux/of_device.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/leon.h>
#include <asm/vaddrs.h>
#include <asm/sections.h>
#include <asm/leon_pci.h>
#include "irq.h"
struct grpci2_barcfg {
unsigned long pciadr; /* PCI Space Address */
unsigned long ahbadr; /* PCI Base address mapped to this AHB addr */
};
/* Device Node Configuration options:
* - barcfgs : Custom Configuration of Host's 6 target BARs
* - irq_mask : Limit which PCI interrupts are enabled
* - do_reset : Force PCI Reset on startup
*
* barcfgs
* =======
*
* Optional custom Target BAR configuration (see struct grpci2_barcfg). All
* addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
*
* -1 means not configured (let host driver do default setup).
*
* [i*2+0] = PCI Address of BAR[i] on target interface
* [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
*
*
* irq_mask
* ========
*
* Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
* all are enabled. Use this when PCI interrupt pins are floating on PCB.
* int, len=4.
* bit0 = PCI INTA#
* bit1 = PCI INTB#
* bit2 = PCI INTC#
* bit3 = PCI INTD#
*
*
* reset
* =====
*
* Force PCI reset on startup. int, len=4
*/
/* Enable Debugging Configuration Space Access */
#undef GRPCI2_DEBUG_CFGACCESS
/*
* GRPCI2 APB Register MAP
*/
struct grpci2_regs {
unsigned int ctrl; /* 0x00 Control */
unsigned int sts_cap; /* 0x04 Status / Capabilities */
int res1; /* 0x08 */
unsigned int io_map; /* 0x0C I/O Map address */
unsigned int dma_ctrl; /* 0x10 DMA */
unsigned int dma_bdbase; /* 0x14 DMA */
int res2[2]; /* 0x18 */
unsigned int bars[6]; /* 0x20 read-only PCI BARs */
int res3[2]; /* 0x38 */
unsigned int ahbmst_map[16]; /* 0x40 AHB->PCI Map per AHB Master */
/* PCI Trace Buffer Registers (OPTIONAL) */
unsigned int t_ctrl; /* 0x80 */
unsigned int t_cnt; /* 0x84 */
unsigned int t_adpat; /* 0x88 */
unsigned int t_admask; /* 0x8C */
unsigned int t_sigpat; /* 0x90 */
unsigned int t_sigmask; /* 0x94 */
unsigned int t_adstate; /* 0x98 */
unsigned int t_sigstate; /* 0x9C */
};
#define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a))))
#define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a)))
#define CTRL_BUS_BIT 16
#define CTRL_RESET (1<<31)
#define CTRL_SI (1<<27)
#define CTRL_PE (1<<26)
#define CTRL_EI (1<<25)
#define CTRL_ER (1<<24)
#define CTRL_BUS (0xff<<CTRL_BUS_BIT)
#define CTRL_HOSTINT 0xf
#define STS_HOST_BIT 31
#define STS_MST_BIT 30
#define STS_TAR_BIT 29
#define STS_DMA_BIT 28
#define STS_DI_BIT 27
#define STS_HI_BIT 26
#define STS_IRQMODE_BIT 24
#define STS_TRACE_BIT 23
#define STS_CFGERRVALID_BIT 20
#define STS_CFGERR_BIT 19
#define STS_INTTYPE_BIT 12
#define STS_INTSTS_BIT 8
#define STS_FDEPTH_BIT 2
#define STS_FNUM_BIT 0
#define STS_HOST (1<<STS_HOST_BIT)
#define STS_MST (1<<STS_MST_BIT)
#define STS_TAR (1<<STS_TAR_BIT)
#define STS_DMA (1<<STS_DMA_BIT)
#define STS_DI (1<<STS_DI_BIT)
#define STS_HI (1<<STS_HI_BIT)
#define STS_IRQMODE (0x3<<STS_IRQMODE_BIT)
#define STS_TRACE (1<<STS_TRACE_BIT)
#define STS_CFGERRVALID (1<<STS_CFGERRVALID_BIT)
#define STS_CFGERR (1<<STS_CFGERR_BIT)
#define STS_INTTYPE (0x3f<<STS_INTTYPE_BIT)
#define STS_INTSTS (0xf<<STS_INTSTS_BIT)
#define STS_FDEPTH (0x7<<STS_FDEPTH_BIT)
#define STS_FNUM (0x3<<STS_FNUM_BIT)
#define STS_ISYSERR (1<<17)
#define STS_IDMA (1<<16)
#define STS_IDMAERR (1<<15)
#define STS_IMSTABRT (1<<14)
#define STS_ITGTABRT (1<<13)
#define STS_IPARERR (1<<12)
#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
struct grpci2_bd_chan {
unsigned int ctrl; /* 0x00 DMA Control */
unsigned int nchan; /* 0x04 Next DMA Channel Address */
unsigned int nbd; /* 0x08 Next Data Descriptor in chan */
unsigned int res; /* 0x0C Reserved */
};
#define BD_CHAN_EN 0x80000000
#define BD_CHAN_TYPE 0x00300000
#define BD_CHAN_BDCNT 0x0000ffff
#define BD_CHAN_EN_BIT 31
#define BD_CHAN_TYPE_BIT 20
#define BD_CHAN_BDCNT_BIT 0
struct grpci2_bd_data {
unsigned int ctrl; /* 0x00 DMA Data Control */
unsigned int pci_adr; /* 0x04 PCI Start Address */
unsigned int ahb_adr; /* 0x08 AHB Start address */
unsigned int next; /* 0x0C Next Data Descriptor in chan */
};
#define BD_DATA_EN 0x80000000
#define BD_DATA_IE 0x40000000
#define BD_DATA_DR 0x20000000
#define BD_DATA_TYPE 0x00300000
#define BD_DATA_ER 0x00080000
#define BD_DATA_LEN 0x0000ffff
#define BD_DATA_EN_BIT 31
#define BD_DATA_IE_BIT 30
#define BD_DATA_DR_BIT 29
#define BD_DATA_TYPE_BIT 20
#define BD_DATA_ER_BIT 19
#define BD_DATA_LEN_BIT 0
/* GRPCI2 Capability */
struct grpci2_cap_first {
unsigned int ctrl;
unsigned int pci2ahb_map[6];
unsigned int ext2ahb_map;
unsigned int io_map;
unsigned int pcibar_size[6];
};
#define CAP9_CTRL_OFS 0
#define CAP9_BAR_OFS 0x4
#define CAP9_IOMAP_OFS 0x20
#define CAP9_BARSIZE_OFS 0x24
struct grpci2_priv {
struct leon_pci_info info; /* must be on top of this structure */
struct grpci2_regs *regs;
char irq;
char irq_mode; /* IRQ Mode from CAPSTS REG */
char bt_enabled;
char do_reset;
char irq_mask;
u32 pciid; /* PCI ID of Host */
unsigned char irq_map[4];
/* Virtual IRQ numbers */
unsigned int virq_err;
unsigned int virq_dma;
/* AHB PCI Windows */
unsigned long pci_area; /* MEMORY */
unsigned long pci_area_end;
unsigned long pci_io; /* I/O */
unsigned long pci_conf; /* CONFIGURATION */
unsigned long pci_conf_end;
unsigned long pci_io_va;
struct grpci2_barcfg tgtbars[6];
};
DEFINE_SPINLOCK(grpci2_dev_lock);
struct grpci2_priv *grpci2priv;
int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct grpci2_priv *priv = dev->bus->sysdata;
int irq_group;
/* Use default IRQ decoding on PCI BUS0 according slot numbering */
irq_group = slot & 0x3;
pin = ((pin - 1) + irq_group) & 0x3;
return priv->irq_map[pin];
}
static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 *val)
{
unsigned int *pci_conf;
unsigned long flags;
u32 tmp;
if (where & 0x3)
return -EINVAL;
if (bus == 0 && PCI_SLOT(devfn) != 0)
devfn += (0x8 * 6);
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
(bus << 16));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
/* clear old status */
REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
pci_conf = (unsigned int *) (priv->pci_conf |
(devfn << 8) | (where & 0xfc));
tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
/* Wait until GRPCI2 signals that CFG access is done, it should be
* done instantaneously unless a DMA operation is ongoing...
*/
while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
;
if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
*val = 0xffffffff;
} else {
/* Bus always little endian (unaffected by byte-swapping) */
*val = flip_dword(tmp);
}
return 0;
}
static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 *val)
{
u32 v;
int ret;
if (where & 0x1)
return -EINVAL;
ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
*val = 0xffff & (v >> (8 * (where & 0x3)));
return ret;
}
static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 *val)
{
u32 v;
int ret;
ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
*val = 0xff & (v >> (8 * (where & 3)));
return ret;
}
static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 val)
{
unsigned int *pci_conf;
unsigned long flags;
if (where & 0x3)
return -EINVAL;
if (bus == 0 && PCI_SLOT(devfn) != 0)
devfn += (0x8 * 6);
/* Select bus */
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
(bus << 16));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
/* clear old status */
REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
pci_conf = (unsigned int *) (priv->pci_conf |
(devfn << 8) | (where & 0xfc));
LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
/* Wait until GRPCI2 signals that CFG access is done, it should be
* done instantaneously unless a DMA operation is ongoing...
*/
while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
;
return 0;
}
static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 val)
{
int ret;
u32 v;
if (where & 0x1)
return -EINVAL;
ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
if (ret)
return ret;
v = (v & ~(0xffff << (8 * (where & 0x3)))) |
((0xffff & val) << (8 * (where & 0x3)));
return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
}
static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
unsigned int devfn, int where, u32 val)
{
int ret;
u32 v;
ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
if (ret != 0)
return ret;
v = (v & ~(0xff << (8 * (where & 0x3)))) |
((0xff & val) << (8 * (where & 0x3)));
return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
}
/* Read from Configuration Space. When entering here the PCI layer has taken
* the pci_lock spinlock and IRQ is off.
*/
static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
struct grpci2_priv *priv = grpci2priv;
unsigned int busno = bus->number;
int ret;
if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
*val = ~0;
return 0;
}
switch (size) {
case 1:
ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
break;
case 2:
ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
break;
case 4:
ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
break;
default:
ret = -EINVAL;
break;
}
#ifdef GRPCI2_DEBUG_CFGACCESS
printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
"size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
*val, size);
#endif
return ret;
}
/* Write to Configuration Space. When entering here the PCI layer has taken
* the pci_lock spinlock and IRQ is off.
*/
static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
struct grpci2_priv *priv = grpci2priv;
unsigned int busno = bus->number;
if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
return 0;
#ifdef GRPCI2_DEBUG_CFGACCESS
printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
"val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
where, size, val);
#endif
switch (size) {
default:
return -EINVAL;
case 1:
return grpci2_cfg_w8(priv, busno, devfn, where, val);
case 2:
return grpci2_cfg_w16(priv, busno, devfn, where, val);
case 4:
return grpci2_cfg_w32(priv, busno, devfn, where, val);
}
}
static struct pci_ops grpci2_ops = {
.read = grpci2_read_config,
.write = grpci2_write_config,
};
/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
* 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
* this is not needed and the standard IRQ controller can be used.
*/
static void grpci2_mask_irq(struct irq_data *data)
{
unsigned long flags;
unsigned int irqidx;
struct grpci2_priv *priv = grpci2priv;
irqidx = (unsigned int)data->chip_data - 1;
if (irqidx > 3) /* only mask PCI interrupts here */
return;
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
}
static void grpci2_unmask_irq(struct irq_data *data)
{
unsigned long flags;
unsigned int irqidx;
struct grpci2_priv *priv = grpci2priv;
irqidx = (unsigned int)data->chip_data - 1;
if (irqidx > 3) /* only unmask PCI interrupts here */
return;
spin_lock_irqsave(&grpci2_dev_lock, flags);
REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
spin_unlock_irqrestore(&grpci2_dev_lock, flags);
}
static unsigned int grpci2_startup_irq(struct irq_data *data)
{
grpci2_unmask_irq(data);
return 0;
}
static void grpci2_shutdown_irq(struct irq_data *data)
{
grpci2_mask_irq(data);
}
static struct irq_chip grpci2_irq = {
.name = "grpci2",
.irq_startup = grpci2_startup_irq,
.irq_shutdown = grpci2_shutdown_irq,
.irq_mask = grpci2_mask_irq,
.irq_unmask = grpci2_unmask_irq,
};
/* Handle one or multiple IRQs from the PCI core */
static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
{
struct grpci2_priv *priv = grpci2priv;
int i, ack = 0;
unsigned int ctrl, sts_cap, pci_ints;
ctrl = REGLOAD(priv->regs->ctrl);
sts_cap = REGLOAD(priv->regs->sts_cap);
/* Error Interrupt? */
if (sts_cap & STS_ERR_IRQ) {
generic_handle_irq(priv->virq_err);
ack = 1;
}
/* PCI Interrupt? */
pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
if (pci_ints) {
/* Call respective PCI Interrupt handler */
for (i = 0; i < 4; i++) {
if (pci_ints & (1 << i))
generic_handle_irq(priv->irq_map[i]);
}
ack = 1;
}
/*
* Decode DMA Interrupt only when shared with Err and PCI INTX#, when
* the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
* goes directly to DMA ISR.
*/
if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
generic_handle_irq(priv->virq_dma);
ack = 1;
}
/*
* Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
* Controller, this must be done after IRQ sources have been handled to
* avoid double IRQ generation
*/
if (ack)
desc->irq_data.chip->irq_eoi(&desc->irq_data);
}
/* Create a virtual IRQ */
static unsigned int grpci2_build_device_irq(unsigned int irq)
{
unsigned int virq = 0, pil;
pil = 1 << 8;
virq = irq_alloc(irq, pil);
if (virq == 0)
goto out;
irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
"pcilvl");
irq_set_chip_data(virq, (void *)irq);
out:
return virq;
}
void grpci2_hw_init(struct grpci2_priv *priv)
{
u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
struct grpci2_regs *regs = priv->regs;
int i;
struct grpci2_barcfg *barcfg = priv->tgtbars;
/* Reset any earlier setup */
if (priv->do_reset) {
printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
REGSTORE(regs->ctrl, CTRL_RESET);
ssleep(1); /* Wait for boards to settle */
}
REGSTORE(regs->ctrl, 0);
REGSTORE(regs->sts_cap, ~0); /* Clear Status */
REGSTORE(regs->dma_ctrl, 0);
REGSTORE(regs->dma_bdbase, 0);
/* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
/* set 1:1 mapping between AHB -> PCI memory space, for all Masters
* Each AHB master has it's own mapping registers. Max 16 AHB masters.
*/
for (i = 0; i < 16; i++)
REGSTORE(regs->ahbmst_map[i], priv->pci_area);
/* Get the GRPCI2 Host PCI ID */
grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
/* Get address to first (always defined) capability structure */
grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
/* Enable/Disable Byte twisting */
grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
/* Setup the Host's PCI Target BARs for other peripherals to access,
* and do DMA to the host's memory. The target BARs can be sized and
* enabled individually.
*
* User may set custom target BARs, but default is:
* The first BARs is used to map kernel low (DMA is part of normal
* region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
* PCI bus, the other BARs are disabled. We assume that the first BAR
* is always available.
*/
for (i = 0; i < 6; i++) {
if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
/* Target BARs must have the proper alignment */
ahbadr = barcfg[i].ahbadr;
pciadr = barcfg[i].pciadr;
bar_sz = ((pciadr - 1) & ~pciadr) + 1;
} else {
if (i == 0) {
/* Map main memory */
bar_sz = 0xf0000008; /* 256MB prefetchable */
ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
(unsigned long) &_end));
pciadr = ahbadr;
} else {
bar_sz = 0;
ahbadr = 0;
pciadr = 0;
}
}
grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
i, pciadr, ahbadr);
}
/* set as bus master and enable pci memory responses */
grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
/* Enable Error respone (CPU-TRAP) on illegal memory access. */
REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
}
static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
{
printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
return IRQ_NONE;
}
/* Handle GRPCI2 Error Interrupt */
static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
{
struct grpci2_priv *priv = arg;
struct grpci2_regs *regs = priv->regs;
unsigned int status;
status = REGLOAD(regs->sts_cap);
if ((status & STS_ERR_IRQ) == 0)
return IRQ_NONE;
if (status & STS_IPARERR)
printk(KERN_ERR "GRPCI2: Parity Error\n");
if (status & STS_ITGTABRT)
printk(KERN_ERR "GRPCI2: Target Abort\n");
if (status & STS_IMSTABRT)
printk(KERN_ERR "GRPCI2: Master Abort\n");
if (status & STS_ISYSERR)
printk(KERN_ERR "GRPCI2: System Error\n");
/* Clear handled INT TYPE IRQs */
REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
return IRQ_HANDLED;
}
static int __devinit grpci2_of_probe(struct platform_device *ofdev)
{
struct grpci2_regs *regs;
struct grpci2_priv *priv;
int err, i, len;
const int *tmp;
unsigned int capability;
if (grpci2priv) {
printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
return -ENODEV;
}
if (ofdev->num_resources < 3) {
printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
return -EIO;
}
/* Find Device Address */
regs = of_ioremap(&ofdev->resource[0], 0,
resource_size(&ofdev->resource[0]),
"grlib-grpci2 regs");
if (regs == NULL) {
printk(KERN_ERR "GRPCI2: ioremap failed\n");
return -EIO;
}
/*
* Check that we're in Host Slot and that we can act as a Host Bridge
* and not only as target.
*/
capability = REGLOAD(regs->sts_cap);
if ((capability & STS_HOST) || !(capability & STS_MST)) {
printk(KERN_INFO "GRPCI2: not in host system slot\n");
err = -EIO;
goto err1;
}
priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
if (grpci2priv == NULL) {
err = -ENOMEM;
goto err1;
}
memset(grpci2priv, 0, sizeof(*grpci2priv));
priv->regs = regs;
priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
/* Byte twisting should be made configurable from kernel command line */
priv->bt_enabled = 1;
/* Let user do custom Target BAR assignment */
tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
if (tmp && (len == 2*4*6))
memcpy(priv->tgtbars, tmp, 2*4*6);
else
memset(priv->tgtbars, -1, 2*4*6);
/* Limit IRQ unmasking in irq_mode 2 and 3 */
tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
if (tmp && (len == 4))
priv->do_reset = *tmp;
else
priv->irq_mask = 0xf;
/* Optional PCI reset. Force PCI reset on startup */
tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
if (tmp && (len == 4))
priv->do_reset = *tmp;
else
priv->do_reset = 0;
/* Find PCI Memory, I/O and Configuration Space Windows */
priv->pci_area = ofdev->resource[1].start;
priv->pci_area_end = ofdev->resource[1].end+1;
priv->pci_io = ofdev->resource[2].start;
priv->pci_conf = ofdev->resource[2].start + 0x10000;
priv->pci_conf_end = priv->pci_conf + 0x10000;
priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
if (!priv->pci_io_va) {
err = -EIO;
goto err2;
}
printk(KERN_INFO
"GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
" I/O SPACE [0x%08lx - 0x%08lx]\n"
" CONFIG SPACE [0x%08lx - 0x%08lx]\n",
priv->pci_area, priv->pci_area_end-1,
priv->pci_io, priv->pci_conf-1,
priv->pci_conf, priv->pci_conf_end-1);
/*
* I/O Space resources in I/O Window mapped into Virtual Adr Space
* We never use low 4KB because some devices seem have problems using
* address 0.
*/
memset(&priv->info.io_space, 0, sizeof(struct resource));
priv->info.io_space.name = "GRPCI2 PCI I/O Space";
priv->info.io_space.start = priv->pci_io_va + 0x1000;
priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
priv->info.io_space.flags = IORESOURCE_IO;
/*
* GRPCI2 has no prefetchable memory, map everything as
* non-prefetchable memory
*/
memset(&priv->info.mem_space, 0, sizeof(struct resource));
priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
priv->info.mem_space.start = priv->pci_area;
priv->info.mem_space.end = priv->pci_area_end - 1;
priv->info.mem_space.flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
goto err3;
if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
goto err4;
grpci2_hw_init(priv);
/*
* Get PCI Interrupt to System IRQ mapping and setup IRQ handling
* Error IRQ always on PCI INTA.
*/
if (priv->irq_mode < 2) {
/* All PCI interrupts are shared using the same system IRQ */
leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
"pcilvl", 0);
priv->irq_map[0] = grpci2_build_device_irq(1);
priv->irq_map[1] = grpci2_build_device_irq(2);
priv->irq_map[2] = grpci2_build_device_irq(3);
priv->irq_map[3] = grpci2_build_device_irq(4);
priv->virq_err = grpci2_build_device_irq(5);
if (priv->irq_mode & 1)
priv->virq_dma = ofdev->archdata.irqs[1];
else
priv->virq_dma = grpci2_build_device_irq(6);
/* Enable IRQs on LEON IRQ controller */
err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
"GRPCI2_JUMP", priv);
if (err)
printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
} else {
/* All PCI interrupts have an unique IRQ interrupt */
for (i = 0; i < 4; i++) {
/* Make LEON IRQ layer handle level IRQ by acking */
leon_update_virq_handling(ofdev->archdata.irqs[i],
handle_fasteoi_irq, "pcilvl",
1);
priv->irq_map[i] = ofdev->archdata.irqs[i];
}
priv->virq_err = priv->irq_map[0];
if (priv->irq_mode & 1)
priv->virq_dma = ofdev->archdata.irqs[4];
else
priv->virq_dma = priv->irq_map[0];
/* Unmask all PCI interrupts, request_irq will not do that */
REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
}
/* Setup IRQ handler for non-configuration space access errors */
err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
"GRPCI2_ERR", priv);
if (err) {
printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
goto err5;
}
/*
* Enable Error Interrupts. PCI interrupts are unmasked once request_irq
* is called by the PCI Device drivers
*/
REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
/* Init common layer and scan buses */
priv->info.ops = &grpci2_ops;
priv->info.map_irq = grpci2_map_irq;
leon_pci_init(ofdev, &priv->info);
return 0;
err5:
release_resource(&priv->info.io_space);
err4:
release_resource(&priv->info.mem_space);
err3:
err = -ENOMEM;
iounmap((void *)priv->pci_io_va);
err2:
kfree(priv);
err1:
of_iounmap(&ofdev->resource[0], regs,
resource_size(&ofdev->resource[0]));
return err;
}
static struct of_device_id grpci2_of_match[] = {
{
.name = "GAISLER_GRPCI2",
},
{
.name = "01_07c",
},
{},
};
static struct platform_driver grpci2_of_driver = {
.driver = {
.name = "grpci2",
.owner = THIS_MODULE,
.of_match_table = grpci2_of_match,
},
.probe = grpci2_of_probe,
};
static int __init grpci2_init(void)
{
return platform_driver_register(&grpci2_of_driver);
}
subsys_initcall(grpci2_init);

View File

@ -214,7 +214,7 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
me->name,
(int) (ELF_R_TYPE(rel[i].r_info) & 0xff));
return -ENOEXEC;
};
}
}
return 0;
}

View File

@ -281,7 +281,7 @@ static int sun4v_read_pci_cfg(struct pci_bus *bus_dev, unsigned int devfn,
case 4:
*value = ret & 0xffffffff;
break;
};
}
return PCIBIOS_SUCCESSFUL;
@ -456,7 +456,7 @@ void pci_determine_mem_io_space(struct pci_pbm_info *pbm)
default:
break;
};
}
}
if (!saw_io || !saw_mem) {

View File

@ -264,7 +264,7 @@ static void schizo_check_iommu_error_pbm(struct pci_pbm_info *pbm,
default:
type_string = "ECC Error";
break;
};
}
printk("%s: IOMMU Error, type[%s]\n",
pbm->name, type_string);
@ -319,7 +319,7 @@ static void schizo_check_iommu_error_pbm(struct pci_pbm_info *pbm,
default:
type_string = "ECC Error";
break;
};
}
printk("%s: IOMMU TAG(%d)[error(%s) ctx(%x) wr(%d) str(%d) "
"sz(%dK) vpg(%08lx)]\n",
pbm->name, i, type_string,
@ -1328,7 +1328,7 @@ static int __devinit schizo_pbm_init(struct pci_pbm_info *pbm,
default:
chipset_name = "SCHIZO";
break;
};
}
/* For SCHIZO, three OBP regs:
* 1) PBM controller regs

View File

@ -694,7 +694,7 @@ static unsigned int sbus_of_build_irq(struct device_node *dp,
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
};
}
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}

View File

@ -228,7 +228,7 @@ void psycho_check_iommu_error(struct pci_pbm_info *pbm,
default:
type_str = "ECC Error";
break;
};
}
printk(KERN_ERR "%s: IOMMU Error, type[%s]\n",
pbm->name, type_str);

View File

@ -97,7 +97,7 @@ void sbus_set_sbus64(struct device *dev, int bursts)
default:
return;
};
}
val = upa_readq(cfg_reg);
if (val & (1UL << 14UL)) {
@ -244,7 +244,7 @@ static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino)
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
};
}
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}

View File

@ -267,7 +267,7 @@ void __init setup_arch(char **cmdline_p)
default:
printk("UNKNOWN!\n");
break;
};
}
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;

View File

@ -209,7 +209,7 @@ void __init per_cpu_patch(void)
default:
prom_printf("Unknown cpu type, halting.\n");
prom_halt();
};
}
*(unsigned int *) (addr + 0) = insns[0];
wmb();

View File

@ -114,7 +114,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
printk("UNKNOWN!\n");
BUG();
break;
};
}
}
void cpu_panic(void)
@ -374,7 +374,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
printk("UNKNOWN!\n");
BUG();
break;
};
}
}
/* Set this up early so that things like the scheduler can init
@ -447,7 +447,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
printk("UNKNOWN!\n");
BUG();
break;
};
}
if (!ret) {
cpumask_set_cpu(cpu, &smp_commenced_mask);

View File

@ -103,10 +103,9 @@ static void sun4d_sbus_handler_irq(int sbusl)
sbil = (sbusl << 2);
/* Loop for each pending SBI */
for (sbino = 0; bus_mask; sbino++) {
for (sbino = 0; bus_mask; sbino++, bus_mask >>= 1) {
unsigned int idx, mask;
bus_mask >>= 1;
if (!(bus_mask & 1))
continue;
/* XXX This seems to ACK the irq twice. acquire_sbi()
@ -118,19 +117,16 @@ static void sun4d_sbus_handler_irq(int sbusl)
mask &= (0xf << sbil);
/* Loop for each pending SBI slot */
idx = 0;
slot = (1 << sbil);
while (mask != 0) {
for (idx = 0; mask != 0; idx++, slot <<= 1) {
unsigned int pil;
struct irq_bucket *p;
idx++;
slot <<= 1;
if (!(mask & slot))
continue;
mask &= ~slot;
pil = sun4d_encode_irq(sbino, sbil, idx);
pil = sun4d_encode_irq(sbino, sbusl, idx);
p = irq_map[pil];
while (p) {
@ -218,10 +214,10 @@ static void sun4d_unmask_irq(struct irq_data *data)
#ifdef CONFIG_SMP
spin_lock_irqsave(&sun4d_imsk_lock, flags);
cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) | ~(1 << real_irq));
cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) & ~(1 << real_irq));
spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
#else
cc_set_imsk(cc_get_imsk() | ~(1 << real_irq));
cc_set_imsk(cc_get_imsk() & ~(1 << real_irq));
#endif
}
@ -299,58 +295,19 @@ static void __init sun4d_load_profile_irqs(void)
}
}
unsigned int sun4d_build_device_irq(struct platform_device *op,
unsigned int real_irq)
unsigned int _sun4d_build_device_irq(unsigned int real_irq,
unsigned int pil,
unsigned int board)
{
struct device_node *dp = op->dev.of_node;
struct device_node *io_unit, *sbi = dp->parent;
const struct linux_prom_registers *regs;
struct sun4d_handler_data *handler_data;
unsigned int pil;
unsigned int irq;
int board, slot;
int sbusl;
irq = 0;
while (sbi) {
if (!strcmp(sbi->name, "sbi"))
break;
sbi = sbi->parent;
}
if (!sbi)
goto err_out;
regs = of_get_property(dp, "reg", NULL);
if (!regs)
goto err_out;
slot = regs->which_io;
/*
* If SBI's parent is not io-unit or the io-unit lacks
* a "board#" property, something is very wrong.
*/
if (!sbi->parent || strcmp(sbi->parent->name, "io-unit")) {
printk("%s: Error, parent is not io-unit.\n", sbi->full_name);
goto err_out;
}
io_unit = sbi->parent;
board = of_getintprop_default(io_unit, "board#", -1);
if (board == -1) {
printk("%s: Error, lacks board# property.\n", io_unit->full_name);
goto err_out;
}
sbusl = pil_to_sbus[real_irq];
if (sbusl)
pil = sun4d_encode_irq(board, sbusl, slot);
else
pil = real_irq;
irq = irq_alloc(real_irq, pil);
if (irq == 0)
if (irq == 0) {
prom_printf("IRQ: allocate for %d %d %d failed\n",
real_irq, pil, board);
goto err_out;
}
handler_data = irq_get_handler_data(irq);
if (unlikely(handler_data))
@ -368,9 +325,80 @@ unsigned int sun4d_build_device_irq(struct platform_device *op,
irq_set_handler_data(irq, handler_data);
err_out:
return real_irq;
return irq;
}
unsigned int sun4d_build_device_irq(struct platform_device *op,
unsigned int real_irq)
{
struct device_node *dp = op->dev.of_node;
struct device_node *board_parent, *bus = dp->parent;
char *bus_connection;
const struct linux_prom_registers *regs;
unsigned int pil;
unsigned int irq;
int board, slot;
int sbusl;
irq = real_irq;
while (bus) {
if (!strcmp(bus->name, "sbi")) {
bus_connection = "io-unit";
break;
}
if (!strcmp(bus->name, "bootbus")) {
bus_connection = "cpu-unit";
break;
}
bus = bus->parent;
}
if (!bus)
goto err_out;
regs = of_get_property(dp, "reg", NULL);
if (!regs)
goto err_out;
slot = regs->which_io;
/*
* If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit
* lacks a "board#" property, something is very wrong.
*/
if (!bus->parent || strcmp(bus->parent->name, bus_connection)) {
printk(KERN_ERR "%s: Error, parent is not %s.\n",
bus->full_name, bus_connection);
goto err_out;
}
board_parent = bus->parent;
board = of_getintprop_default(board_parent, "board#", -1);
if (board == -1) {
printk(KERN_ERR "%s: Error, lacks board# property.\n",
board_parent->full_name);
goto err_out;
}
sbusl = pil_to_sbus[real_irq];
if (sbusl)
pil = sun4d_encode_irq(board, sbusl, slot);
else
pil = real_irq;
irq = _sun4d_build_device_irq(real_irq, pil, board);
err_out:
return irq;
}
unsigned int sun4d_build_timer_irq(unsigned int board, unsigned int real_irq)
{
return _sun4d_build_device_irq(real_irq, real_irq, board);
}
static void __init sun4d_fixup_trap_table(void)
{
#ifdef CONFIG_SMP
@ -402,6 +430,7 @@ static void __init sun4d_init_timers(irq_handler_t counter_fn)
unsigned int irq;
const u32 *reg;
int err;
int board;
dp = of_find_node_by_name(NULL, "cpu-unit");
if (!dp) {
@ -414,12 +443,19 @@ static void __init sun4d_init_timers(irq_handler_t counter_fn)
* bootbus.
*/
reg = of_get_property(dp, "reg", NULL);
of_node_put(dp);
if (!reg) {
prom_printf("sun4d_init_timers: No reg property\n");
prom_halt();
}
board = of_getintprop_default(dp, "board#", -1);
if (board == -1) {
prom_printf("sun4d_init_timers: No board# property on cpu-unit\n");
prom_halt();
}
of_node_put(dp);
res.start = reg[1];
res.end = reg[2] - 1;
res.flags = reg[0] & 0xff;
@ -434,7 +470,7 @@ static void __init sun4d_init_timers(irq_handler_t counter_fn)
master_l10_counter = &sun4d_timers->l10_cur_count;
irq = sun4d_build_device_irq(NULL, SUN4D_TIMER_IRQ);
irq = sun4d_build_timer_irq(board, SUN4D_TIMER_IRQ);
err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
if (err) {
prom_printf("sun4d_init_timers: request_irq() failed with %d\n",

Some files were not shown because too many files have changed in this diff Show More