From 2e61069b056f7ac3cde5f84a4be8aa703b57089d Mon Sep 17 00:00:00 2001 From: Sinan Kaya Date: Sun, 30 Dec 2018 20:40:05 +0000 Subject: [PATCH 001/246] ACPI: Fix build failure when CONFIG_NLS is set to 'n' Observing link failure as follows when CONFIG_ACPI is set but both CONFIG_NLS and CONFIG_PCI are no set: drivers/acpi/device_sysfs.o: In function `description_show': device_sysfs.c:(.text+0x48a): undefined reference to `utf16s_to_utf8s' This issue was previously addressed implicitly by commit 8a226e00eeed (PCI: pci-label: Fix build failure when CONFIG_NLS is set to 'm' by allmodconfig) causing PCI_LABEL to be selected when ACPI was set which caused NLS to be selected too in that case. However, after commit 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) it is possible to build ACPI support without PCI, so make ACPI select NLS directly to cover that case. Fixes: 5d32a66541c46 (PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set) Signed-off-by: Sinan Kaya [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 7b65a807b3dd..90ff0a47c12e 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -10,6 +10,7 @@ menuconfig ACPI bool "ACPI (Advanced Configuration and Power Interface) Support" depends on ARCH_SUPPORTS_ACPI select PNP + select NLS default y if X86 help Advanced Configuration and Power Interface (ACPI) support for From 7d7b467cb95bf29597b417d4990160d4ea6d69b9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 30 Dec 2018 18:25:00 +0100 Subject: [PATCH 002/246] ACPI: power: Skip duplicate power resource references in _PRx Some ACPI tables contain duplicate power resource references like this: Name (_PR0, Package (0x04) // _PR0: Power Resources for D0 { P28P, P18P, P18P, CLK4 }) This causes a WARN_ON in sysfs_add_link_to_group() because we end up adding a link to the same acpi_device twice: sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1 Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016 Call Trace: dump_stack+0x5c/0x80 sysfs_warn_dup.cold.3+0x17/0x2a sysfs_do_create_link_sd.isra.2+0xa9/0xb0 sysfs_add_link_to_group+0x30/0x50 acpi_power_expose_list+0x74/0xa0 acpi_power_add_remove_device+0x50/0xa0 acpi_add_single_object+0x26b/0x5f0 acpi_bus_check_add+0xc4/0x250 ... To address this issue, make acpi_extract_power_resources() check for duplicates and simply skip them when found. Cc: All applicable Signed-off-by: Hans de Goede [ rjw: Subject & changelog, comments ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/power.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 1b475bc1ae16..665e93ca0b40 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -131,6 +131,23 @@ void acpi_power_resources_list_free(struct list_head *list) } } +static bool acpi_power_resource_is_dup(union acpi_object *package, + unsigned int start, unsigned int i) +{ + acpi_handle rhandle, dup; + unsigned int j; + + /* The caller is expected to check the package element types */ + rhandle = package->package.elements[i].reference.handle; + for (j = start; j < i; j++) { + dup = package->package.elements[j].reference.handle; + if (dup == rhandle) + return true; + } + + return false; +} + int acpi_extract_power_resources(union acpi_object *package, unsigned int start, struct list_head *list) { @@ -150,6 +167,11 @@ int acpi_extract_power_resources(union acpi_object *package, unsigned int start, err = -ENODEV; break; } + + /* Some ACPI tables contain duplicate power resource references */ + if (acpi_power_resource_is_dup(package, start, i)) + continue; + err = acpi_add_power_resource(rhandle); if (err) break; From 47bbcc1e92385b595e92e11e29076185c820a0b8 Mon Sep 17 00:00:00 2001 From: Emily Deng Date: Wed, 26 Dec 2018 18:09:33 +0800 Subject: [PATCH 003/246] drm/amdgpu/virtual_dce: No need to pin the fb's bo For virtual display, no need to pin the fb's bo. Signed-off-by: Emily Deng Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 20 ++++++++++++-------- drivers/gpu/drm/amd/amdgpu/dce_virtual.c | 17 +++-------------- 2 files changed, 15 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 15ce7e681d67..b083b219b1a9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -188,10 +188,12 @@ int amdgpu_display_crtc_page_flip_target(struct drm_crtc *crtc, goto cleanup; } - r = amdgpu_bo_pin(new_abo, amdgpu_display_supported_domains(adev)); - if (unlikely(r != 0)) { - DRM_ERROR("failed to pin new abo buffer before flip\n"); - goto unreserve; + if (!adev->enable_virtual_display) { + r = amdgpu_bo_pin(new_abo, amdgpu_display_supported_domains(adev)); + if (unlikely(r != 0)) { + DRM_ERROR("failed to pin new abo buffer before flip\n"); + goto unreserve; + } } r = amdgpu_ttm_alloc_gart(&new_abo->tbo); @@ -211,7 +213,8 @@ int amdgpu_display_crtc_page_flip_target(struct drm_crtc *crtc, amdgpu_bo_get_tiling_flags(new_abo, &tiling_flags); amdgpu_bo_unreserve(new_abo); - work->base = amdgpu_bo_gpu_offset(new_abo); + if (!adev->enable_virtual_display) + work->base = amdgpu_bo_gpu_offset(new_abo); work->target_vblank = target - (uint32_t)drm_crtc_vblank_count(crtc) + amdgpu_get_vblank_counter_kms(dev, work->crtc_id); @@ -242,9 +245,10 @@ pflip_cleanup: goto cleanup; } unpin: - if (unlikely(amdgpu_bo_unpin(new_abo) != 0)) { - DRM_ERROR("failed to unpin new abo in error path\n"); - } + if (!adev->enable_virtual_display) + if (unlikely(amdgpu_bo_unpin(new_abo) != 0)) + DRM_ERROR("failed to unpin new abo in error path\n"); + unreserve: amdgpu_bo_unreserve(new_abo); diff --git a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c index fdace004544d..e4cc1d48eaab 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_virtual.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_virtual.c @@ -167,19 +167,6 @@ static void dce_virtual_crtc_disable(struct drm_crtc *crtc) struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); dce_virtual_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); - if (crtc->primary->fb) { - int r; - struct amdgpu_bo *abo; - - abo = gem_to_amdgpu_bo(crtc->primary->fb->obj[0]); - r = amdgpu_bo_reserve(abo, true); - if (unlikely(r)) - DRM_ERROR("failed to reserve abo before unpin\n"); - else { - amdgpu_bo_unpin(abo); - amdgpu_bo_unreserve(abo); - } - } amdgpu_crtc->pll_id = ATOM_PPLL_INVALID; amdgpu_crtc->encoder = NULL; @@ -692,7 +679,9 @@ static int dce_virtual_pageflip(struct amdgpu_device *adev, spin_unlock_irqrestore(&adev->ddev->event_lock, flags); drm_crtc_vblank_put(&amdgpu_crtc->base); - schedule_work(&works->unpin_work); + amdgpu_bo_unref(&works->old_abo); + kfree(works->shared); + kfree(works); return 0; } From baf3c982dfbf7b0742039e6fef3f1fe1ba4079ab Mon Sep 17 00:00:00 2001 From: Emily Deng Date: Wed, 26 Dec 2018 18:08:54 +0800 Subject: [PATCH 004/246] drm/amdgpu/virtual_dce: No need to pin the cursor bo For virtual display feature, no need to pin cursor bo. Signed-off-by: Emily Deng Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 8a078f4ae73d..98df8e4704eb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2798,7 +2798,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool suspend, bool fbcon) struct drm_framebuffer *fb = crtc->primary->fb; struct amdgpu_bo *robj; - if (amdgpu_crtc->cursor_bo) { + if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) { struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo); r = amdgpu_bo_reserve(aobj, true); if (r == 0) { @@ -2906,7 +2906,7 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); - if (amdgpu_crtc->cursor_bo) { + if (amdgpu_crtc->cursor_bo && !adev->enable_virtual_display) { struct amdgpu_bo *aobj = gem_to_amdgpu_bo(amdgpu_crtc->cursor_bo); r = amdgpu_bo_reserve(aobj, true); if (r == 0) { From 048b9b0f5ceefb2691834ac62f8459ebb7d3100e Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Thu, 27 Dec 2018 14:23:30 +0800 Subject: [PATCH 005/246] drm/amd/powerplay: support BOOTUP_DEFAULT power profile mode This can avoid unexpected profile mode change after running compute workload. Signed-off-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- .../gpu/drm/amd/include/kgd_pp_interface.h | 13 ++++++----- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 22 ++++++++++--------- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 8 ++++--- .../drm/amd/powerplay/hwmgr/vega10_hwmgr.c | 12 +++++----- .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 10 ++++++--- drivers/gpu/drm/amd/powerplay/inc/hwmgr.h | 2 +- 6 files changed, 39 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h index 1479ea1dc3e7..789c4f288485 100644 --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h @@ -127,12 +127,13 @@ enum amd_pp_task { }; enum PP_SMC_POWER_PROFILE { - PP_SMC_POWER_PROFILE_FULLSCREEN3D = 0x0, - PP_SMC_POWER_PROFILE_POWERSAVING = 0x1, - PP_SMC_POWER_PROFILE_VIDEO = 0x2, - PP_SMC_POWER_PROFILE_VR = 0x3, - PP_SMC_POWER_PROFILE_COMPUTE = 0x4, - PP_SMC_POWER_PROFILE_CUSTOM = 0x5, + PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT = 0x0, + PP_SMC_POWER_PROFILE_FULLSCREEN3D = 0x1, + PP_SMC_POWER_PROFILE_POWERSAVING = 0x2, + PP_SMC_POWER_PROFILE_VIDEO = 0x3, + PP_SMC_POWER_PROFILE_VR = 0x4, + PP_SMC_POWER_PROFILE_COMPUTE = 0x5, + PP_SMC_POWER_PROFILE_CUSTOM = 0x6, }; enum { diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 47ac92369739..472263ab274a 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -64,17 +64,19 @@ static int ci_set_asic_special_caps(struct pp_hwmgr *hwmgr); static void hwmgr_init_workload_prority(struct pp_hwmgr *hwmgr) { - hwmgr->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D] = 2; - hwmgr->workload_prority[PP_SMC_POWER_PROFILE_POWERSAVING] = 0; - hwmgr->workload_prority[PP_SMC_POWER_PROFILE_VIDEO] = 1; - hwmgr->workload_prority[PP_SMC_POWER_PROFILE_VR] = 3; - hwmgr->workload_prority[PP_SMC_POWER_PROFILE_COMPUTE] = 4; + hwmgr->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT] = 0; + hwmgr->workload_prority[PP_SMC_POWER_PROFILE_FULLSCREEN3D] = 1; + hwmgr->workload_prority[PP_SMC_POWER_PROFILE_POWERSAVING] = 2; + hwmgr->workload_prority[PP_SMC_POWER_PROFILE_VIDEO] = 3; + hwmgr->workload_prority[PP_SMC_POWER_PROFILE_VR] = 4; + hwmgr->workload_prority[PP_SMC_POWER_PROFILE_COMPUTE] = 5; - hwmgr->workload_setting[0] = PP_SMC_POWER_PROFILE_POWERSAVING; - hwmgr->workload_setting[1] = PP_SMC_POWER_PROFILE_VIDEO; - hwmgr->workload_setting[2] = PP_SMC_POWER_PROFILE_FULLSCREEN3D; - hwmgr->workload_setting[3] = PP_SMC_POWER_PROFILE_VR; - hwmgr->workload_setting[4] = PP_SMC_POWER_PROFILE_COMPUTE; + hwmgr->workload_setting[0] = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; + hwmgr->workload_setting[1] = PP_SMC_POWER_PROFILE_FULLSCREEN3D; + hwmgr->workload_setting[2] = PP_SMC_POWER_PROFILE_POWERSAVING; + hwmgr->workload_setting[3] = PP_SMC_POWER_PROFILE_VIDEO; + hwmgr->workload_setting[4] = PP_SMC_POWER_PROFILE_VR; + hwmgr->workload_setting[5] = PP_SMC_POWER_PROFILE_COMPUTE; } int hwmgr_early_init(struct pp_hwmgr *hwmgr) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 3958729d6265..13d65fd877cf 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -77,8 +77,9 @@ #define PCIE_BUS_CLK 10000 #define TCLK (PCIE_BUS_CLK / 10) -static const struct profile_mode_setting smu7_profiling[6] = - {{1, 0, 100, 30, 1, 0, 100, 10}, +static const struct profile_mode_setting smu7_profiling[7] = + {{0, 0, 0, 0, 0, 0, 0, 0}, + {1, 0, 100, 30, 1, 0, 100, 10}, {1, 10, 0, 30, 0, 0, 0, 0}, {0, 0, 0, 0, 1, 10, 16, 31}, {1, 0, 11, 50, 1, 0, 100, 10}, @@ -4885,7 +4886,8 @@ static int smu7_get_power_profile_mode(struct pp_hwmgr *hwmgr, char *buf) uint32_t i, size = 0; uint32_t len; - static const char *profile_name[6] = {"3D_FULL_SCREEN", + static const char *profile_name[7] = {"BOOTUP_DEFAULT", + "3D_FULL_SCREEN", "POWER_SAVING", "VIDEO", "VR", diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c index e2bc6e0c229f..a4221b91d3fb 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c @@ -804,9 +804,9 @@ static int vega10_hwmgr_backend_init(struct pp_hwmgr *hwmgr) hwmgr->backend = data; - hwmgr->workload_mask = 1 << hwmgr->workload_prority[PP_SMC_POWER_PROFILE_VIDEO]; - hwmgr->power_profile_mode = PP_SMC_POWER_PROFILE_VIDEO; - hwmgr->default_power_profile_mode = PP_SMC_POWER_PROFILE_VIDEO; + hwmgr->workload_mask = 1 << hwmgr->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT]; + hwmgr->power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; + hwmgr->default_power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; vega10_set_default_registry_data(hwmgr); data->disable_dpm_mask = 0xff; @@ -4664,13 +4664,15 @@ static int vega10_get_power_profile_mode(struct pp_hwmgr *hwmgr, char *buf) { struct vega10_hwmgr *data = hwmgr->backend; uint32_t i, size = 0; - static const uint8_t profile_mode_setting[5][4] = {{70, 60, 1, 3,}, + static const uint8_t profile_mode_setting[6][4] = {{70, 60, 0, 0,}, + {70, 60, 1, 3,}, {90, 60, 0, 0,}, {70, 60, 0, 0,}, {70, 90, 0, 0,}, {30, 60, 0, 6,}, }; - static const char *profile_name[6] = {"3D_FULL_SCREEN", + static const char *profile_name[7] = {"BOOTUP_DEFAULT", + "3D_FULL_SCREEN", "POWER_SAVING", "VIDEO", "VR", diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 5a93a902d3dd..ea0b52d46fe9 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -390,9 +390,9 @@ static int vega20_hwmgr_backend_init(struct pp_hwmgr *hwmgr) hwmgr->backend = data; - hwmgr->workload_mask = 1 << hwmgr->workload_prority[PP_SMC_POWER_PROFILE_VIDEO]; - hwmgr->power_profile_mode = PP_SMC_POWER_PROFILE_VIDEO; - hwmgr->default_power_profile_mode = PP_SMC_POWER_PROFILE_VIDEO; + hwmgr->workload_mask = 1 << hwmgr->workload_prority[PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT]; + hwmgr->power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; + hwmgr->default_power_profile_mode = PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT; vega20_set_default_registry_data(hwmgr); @@ -3251,6 +3251,9 @@ static int conv_power_profile_to_pplib_workload(int power_profile) int pplib_workload = 0; switch (power_profile) { + case PP_SMC_POWER_PROFILE_BOOTUP_DEFAULT: + pplib_workload = WORKLOAD_DEFAULT_BIT; + break; case PP_SMC_POWER_PROFILE_FULLSCREEN3D: pplib_workload = WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT; break; @@ -3280,6 +3283,7 @@ static int vega20_get_power_profile_mode(struct pp_hwmgr *hwmgr, char *buf) uint32_t i, size = 0; uint16_t workload_type = 0; static const char *profile_name[] = { + "BOOTUP_DEFAULT", "3D_FULL_SCREEN", "POWER_SAVING", "VIDEO", diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h index 0d298a0409f5..8cb831b6a016 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h @@ -705,7 +705,7 @@ enum PP_TABLE_VERSION { /** * The main hardware manager structure. */ -#define Workload_Policy_Max 5 +#define Workload_Policy_Max 6 struct pp_hwmgr { void *adev; From b8cf66182eddb22e9c7539821ed6eecdb4f86d1a Mon Sep 17 00:00:00 2001 From: Emily Deng Date: Sat, 29 Dec 2018 17:46:05 +0800 Subject: [PATCH 006/246] drm/amdgpu/sriov:Correct pfvf exchange logic The pfvf exchange need be in exclusive mode. And add pfvf exchange in gpu reset. Signed-off-by: Emily Deng Reviewed-By: Xiangliang Yu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 ++++---- drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 98df8e4704eb..7ff3a28fc903 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1701,8 +1701,10 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev) amdgpu_xgmi_add_device(adev); amdgpu_amdkfd_device_init(adev); - if (amdgpu_sriov_vf(adev)) + if (amdgpu_sriov_vf(adev)) { + amdgpu_virt_init_data_exchange(adev); amdgpu_virt_release_full_gpu(adev, true); + } return 0; } @@ -2632,9 +2634,6 @@ fence_driver_init: goto failed; } - if (amdgpu_sriov_vf(adev)) - amdgpu_virt_init_data_exchange(adev); - amdgpu_fbdev_init(adev); r = amdgpu_pm_sysfs_init(adev); @@ -3226,6 +3225,7 @@ static int amdgpu_device_reset_sriov(struct amdgpu_device *adev, r = amdgpu_ib_ring_tests(adev); error: + amdgpu_virt_init_data_exchange(adev); amdgpu_virt_release_full_gpu(adev, true); if (!r && adev->virt.gim_feature & AMDGIM_FEATURE_GIM_FLR_VRAMLOST) { atomic_inc(&adev->vram_lost_counter); diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c index 8cbb4655896a..b11a1c17a7f2 100644 --- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c +++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c @@ -174,7 +174,7 @@ static int xgpu_ai_send_access_requests(struct amdgpu_device *adev, return r; } /* Retrieve checksum from mailbox2 */ - if (req == IDH_REQ_GPU_INIT_ACCESS) { + if (req == IDH_REQ_GPU_INIT_ACCESS || req == IDH_REQ_GPU_RESET_ACCESS) { adev->virt.fw_reserve.checksum_key = RREG32_NO_KIQ(SOC15_REG_OFFSET(NBIO, 0, mmBIF_BX_PF0_MAILBOX_MSGBUF_RCV_DW2)); From e49cddcd0ab08f2a3bf3fea8554ea45ae1446d26 Mon Sep 17 00:00:00 2001 From: Tiecheng Zhou Date: Mon, 24 Dec 2018 08:55:45 +0800 Subject: [PATCH 007/246] drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequence The kiq ring and the very first compute ring may fail occasionally if they are tested directly following kiq_kcq_enable. Insert the gfx ring test before kiq ring test to delay the kiq and kcq ring tests will fix the issue. Acked-by: Alex Deucher Signed-off-by: Tiecheng Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 50 +++++++++++++++++++-------- 1 file changed, 36 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 381f593b0cda..164ffc91b645 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -4278,9 +4278,8 @@ static int gfx_v8_0_cp_gfx_resume(struct amdgpu_device *adev) amdgpu_ring_clear_ring(ring); gfx_v8_0_cp_gfx_start(adev); ring->sched.ready = true; - r = amdgpu_ring_test_helper(ring); - return r; + return 0; } static void gfx_v8_0_cp_compute_enable(struct amdgpu_device *adev, bool enable) @@ -4369,10 +4368,9 @@ static int gfx_v8_0_kiq_kcq_enable(struct amdgpu_device *adev) amdgpu_ring_write(kiq_ring, upper_32_bits(wptr_addr)); } - r = amdgpu_ring_test_helper(kiq_ring); - if (r) - DRM_ERROR("KCQ enable failed\n"); - return r; + amdgpu_ring_commit(kiq_ring); + + return 0; } static int gfx_v8_0_deactivate_hqd(struct amdgpu_device *adev, u32 req) @@ -4709,18 +4707,34 @@ static int gfx_v8_0_kcq_resume(struct amdgpu_device *adev) if (r) goto done; - /* Test KCQs - reversing the order of rings seems to fix ring test failure - * after GPU reset - */ - for (i = adev->gfx.num_compute_rings - 1; i >= 0; i--) { - ring = &adev->gfx.compute_ring[i]; - r = amdgpu_ring_test_helper(ring); - } - done: return r; } +static int gfx_v8_0_cp_test_all_rings(struct amdgpu_device *adev) +{ + int r, i; + struct amdgpu_ring *ring; + + /* collect all the ring_tests here, gfx, kiq, compute */ + ring = &adev->gfx.gfx_ring[0]; + r = amdgpu_ring_test_helper(ring); + if (r) + return r; + + ring = &adev->gfx.kiq.ring; + r = amdgpu_ring_test_helper(ring); + if (r) + return r; + + for (i = 0; i < adev->gfx.num_compute_rings; i++) { + ring = &adev->gfx.compute_ring[i]; + amdgpu_ring_test_helper(ring); + } + + return 0; +} + static int gfx_v8_0_cp_resume(struct amdgpu_device *adev) { int r; @@ -4739,6 +4753,11 @@ static int gfx_v8_0_cp_resume(struct amdgpu_device *adev) r = gfx_v8_0_kcq_resume(adev); if (r) return r; + + r = gfx_v8_0_cp_test_all_rings(adev); + if (r) + return r; + gfx_v8_0_enable_gui_idle_interrupt(adev, true); return 0; @@ -5056,6 +5075,7 @@ static int gfx_v8_0_post_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 grbm_soft_reset = 0; + struct amdgpu_ring *ring; if ((!adev->gfx.grbm_soft_reset) && (!adev->gfx.srbm_soft_reset)) @@ -5086,6 +5106,8 @@ static int gfx_v8_0_post_soft_reset(void *handle) REG_GET_FIELD(grbm_soft_reset, GRBM_SOFT_RESET, SOFT_RESET_GFX)) gfx_v8_0_cp_gfx_resume(adev); + gfx_v8_0_cp_test_all_rings(adev); + adev->gfx.rlc.funcs->start(adev); return 0; From 6e863844ad6effecac92a67a43b8467a8c2e129f Mon Sep 17 00:00:00 2001 From: Lukasz Luba Date: Wed, 5 Dec 2018 12:05:55 +0100 Subject: [PATCH 008/246] PM: sleep: call devfreq suspend/resume Devfreq framework supports suspend of its devices. Call the the devfreq interface and allow devfreq devices preserve/restore their states during suspend/resume. Suggested-by: Tobias Jakobi Reviewed-by: Chanwoo Choi Signed-off-by: Lukasz Luba Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index a690fd400260..0992e67e862b 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include "../base.h" @@ -1078,6 +1079,7 @@ void dpm_resume(pm_message_t state) dpm_show_time(starttime, state, 0, NULL); cpufreq_resume(); + devfreq_resume(); trace_suspend_resume(TPS("dpm_resume"), state.event, false); } @@ -1852,6 +1854,7 @@ int dpm_suspend(pm_message_t state) trace_suspend_resume(TPS("dpm_suspend"), state.event, true); might_sleep(); + devfreq_suspend(); cpufreq_suspend(); mutex_lock(&dpm_list_mtx); From 088d923a11e683af28ad9cea9b66782fff588495 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 2 Jan 2019 12:13:52 +0100 Subject: [PATCH 009/246] cpufreq / Documentation: Update cpufreq MAINTAINERS entry Update the MAINTAINERS entry for cpufreq by making it clear that it is not just drivers and adding current documentation records to it. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7808b166fdb9..2a01d1af1e26 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3909,7 +3909,7 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/ti/cpmac.c -CPU FREQUENCY DRIVERS +CPU FREQUENCY SCALING FRAMEWORK M: "Rafael J. Wysocki" M: Viresh Kumar L: linux-pm@vger.kernel.org @@ -3917,6 +3917,8 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates) B: https://bugzilla.kernel.org +F: Documentation/admin-guide/pm/cpufreq.rst +F: Documentation/admin-guide/pm/intel_pstate.rst F: Documentation/cpu-freq/ F: Documentation/devicetree/bindings/cpufreq/ F: drivers/cpufreq/ From b9ced18acf68dffebe6888c7ec765a2b1db7a039 Mon Sep 17 00:00:00 2001 From: Chao Fan Date: Wed, 26 Dec 2018 11:34:50 +0800 Subject: [PATCH 010/246] ACPI: NUMA: Use correct type for printing addresses on i386-PAE The addresses of NUMA nodes are not printed correctly on i386-PAE which is misleading. Here is a debian9-32bit with PAE in a QEMU guest having more than 4G of memory: qemu-system-i386 \ -hda /var/lib/libvirt/images/debian32.qcow2 \ -m 5G \ -enable-kvm \ -smp 10 \ -numa node,mem=512M,nodeid=0,cpus=0 \ -numa node,mem=512M,nodeid=1,cpus=1 \ -numa node,mem=512M,nodeid=2,cpus=2 \ -numa node,mem=512M,nodeid=3,cpus=3 \ -numa node,mem=512M,nodeid=4,cpus=4 \ -numa node,mem=512M,nodeid=5,cpus=5 \ -numa node,mem=512M,nodeid=6,cpus=6 \ -numa node,mem=512M,nodeid=7,cpus=7 \ -numa node,mem=512M,nodeid=8,cpus=8 \ -numa node,mem=512M,nodeid=9,cpus=9 \ -serial stdio Because of the wrong value type, it prints as below: [ 0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled [ 0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled [ 0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled [ 0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled The upper half of the start address of the NUMA domains between 6 and 9 inclusive was cut, so the printed values are incorrect. Fix the value type, to get the correct values in the log as follows: [ 0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled [ 0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled [ 0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled [ 0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled Signed-off-by: Chao Fan [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki --- drivers/acpi/numa.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 274699463b4f..7bbbf8256a41 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -146,9 +146,9 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header) { struct acpi_srat_mem_affinity *p = (struct acpi_srat_mem_affinity *)header; - pr_debug("SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s%s\n", - (unsigned long)p->base_address, - (unsigned long)p->length, + pr_debug("SRAT Memory (0x%llx length 0x%llx) in proximity domain %d %s%s%s\n", + (unsigned long long)p->base_address, + (unsigned long long)p->length, p->proximity_domain, (p->flags & ACPI_SRAT_MEM_ENABLED) ? "enabled" : "disabled", From 8a99255a50c0b4c2a449b96fd8d45fcc8d72c701 Mon Sep 17 00:00:00 2001 From: Jin Yao Date: Thu, 3 Jan 2019 15:40:45 +0800 Subject: [PATCH 011/246] perf stat: Fix endless wait for child process We hit a 'perf stat' issue by using following script: #!/bin/bash sleep 1000 & exec perf stat -a -e cycles -I1000 -- sleep 5 Since "perf stat" is launched by exec, the "sleep 1000" would be the child process of "perf stat". The wait4() call will not return because it's waiting for the child process "sleep 1000" to end. So 'perf stat' doesn't return even after 5s passes. This patch lets 'perf stat' return when the specified child process ends (in this case, the specified child process is "sleep 5"). Committer testing: # cat test.sh #!/bin/bash sleep 10 & exec perf stat -a -e cycles -I1000 -- sleep 5 # Before: # time ./test.sh # time counts unit events 1.001113090 108,453,351 cycles 2.002062196 142,075,435 cycles 3.002896194 164,801,068 cycles 4.003731666 107,062,140 cycles 5.002068867 112,241,832 cycles real 0m10.066s user 0m0.016s sys 0m0.101s # After: # time ./test.sh # time counts unit events 1.001016096 91,412,027 cycles 2.002014963 124,063,708 cycles 3.002883964 125,993,929 cycles 4.003706470 120,465,734 cycles 5.002006778 163,560,355 cycles real 0m5.123s user 0m0.014s sys 0m0.105s # Signed-off-by: Jin Yao Reviewed-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1546501245-4512-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 1410d66192f7..63a3afc7f32b 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -561,7 +561,8 @@ try_again: break; } } - wait4(child_pid, &status, 0, &stat_config.ru_data); + if (child_pid != -1) + wait4(child_pid, &status, 0, &stat_config.ru_data); if (workload_exec_errno) { const char *emsg = str_error_r(workload_exec_errno, msg, sizeof(msg)); From 94f45df8aaa35471ab3fc802c2cf1b75c8107500 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 3 Jan 2019 13:53:59 -0300 Subject: [PATCH 012/246] tools headers x86: Sync disabled-features.h To silence the following tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Picking up the changes in dae0a1059300 ("x86/cpufeatures, x86/fault: Mark SMAP as disabled when configured out") that didn't entail any functionality change in the tooling side. Cc: Adrian Hunter Cc: Andy Lutomirski Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-vvge5xh6ii12oszexqknbgwp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/x86/include/asm/disabled-features.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/arch/x86/include/asm/disabled-features.h b/tools/arch/x86/include/asm/disabled-features.h index 33833d1909af..a5ea841cc6d2 100644 --- a/tools/arch/x86/include/asm/disabled-features.h +++ b/tools/arch/x86/include/asm/disabled-features.h @@ -16,6 +16,12 @@ # define DISABLE_MPX (1<<(X86_FEATURE_MPX & 31)) #endif +#ifdef CONFIG_X86_SMAP +# define DISABLE_SMAP 0 +#else +# define DISABLE_SMAP (1<<(X86_FEATURE_SMAP & 31)) +#endif + #ifdef CONFIG_X86_INTEL_UMIP # define DISABLE_UMIP 0 #else @@ -68,7 +74,7 @@ #define DISABLED_MASK6 0 #define DISABLED_MASK7 (DISABLE_PTI) #define DISABLED_MASK8 0 -#define DISABLED_MASK9 (DISABLE_MPX) +#define DISABLED_MASK9 (DISABLE_MPX|DISABLE_SMAP) #define DISABLED_MASK10 0 #define DISABLED_MASK11 0 #define DISABLED_MASK12 0 From 96d8f63c44e5d4db48d98c40bb74d0a0e47ae301 Mon Sep 17 00:00:00 2001 From: Kent Russell Date: Thu, 3 Jan 2019 08:33:15 -0500 Subject: [PATCH 013/246] drm/amdgpu: Cleanup 2 compiler warnings These 2 variables are unused now, so remove their references. Fixes: e4ae0fc drm/amdgpu: implement gfx8 post_soft_reset Fixes: 5e01c09 drm/amdgpu/gfx_v8_0: Reorder the gfx, kiq and kcq rings test sequence Signed-off-by: Kent Russell Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 164ffc91b645..57cb3a51bda7 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -4233,7 +4233,6 @@ static int gfx_v8_0_cp_gfx_resume(struct amdgpu_device *adev) u32 tmp; u32 rb_bufsz; u64 rb_addr, rptr_addr, wptr_gpu_addr; - int r; /* Set the write pointer delay */ WREG32(mmCP_RB_WPTR_DELAY, 0); @@ -5075,7 +5074,6 @@ static int gfx_v8_0_post_soft_reset(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; u32 grbm_soft_reset = 0; - struct amdgpu_ring *ring; if ((!adev->gfx.grbm_soft_reset) && (!adev->gfx.srbm_soft_reset)) From abc856259a6dc513868ad91e00a70379825d59c4 Mon Sep 17 00:00:00 2001 From: Likun Gao Date: Wed, 2 Jan 2019 12:20:12 +0800 Subject: [PATCH 014/246] drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG MGCG should RLC enter into safe mode first. Signed-off-by: Likun Gao Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index f62d570a81a8..618639b8775a 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -3586,6 +3586,8 @@ static void gfx_v9_0_update_medium_grain_clock_gating(struct amdgpu_device *adev { uint32_t data, def; + amdgpu_gfx_rlc_enter_safe_mode(adev); + /* It is disabled by HW by default */ if (enable && (adev->cg_flags & AMD_CG_SUPPORT_GFX_MGCG)) { /* 1 - RLC_CGTT_MGCG_OVERRIDE */ @@ -3650,6 +3652,8 @@ static void gfx_v9_0_update_medium_grain_clock_gating(struct amdgpu_device *adev WREG32_SOC15(GC, 0, mmCP_MEM_SLP_CNTL, data); } } + + amdgpu_gfx_rlc_exit_safe_mode(adev); } static void gfx_v9_0_update_3d_clock_gating(struct amdgpu_device *adev, From 3d32c4531958c433a6ee087f31891cb02d6b68d9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 3 Jan 2019 14:56:20 -0300 Subject: [PATCH 015/246] tools headers uapi: Sync prctl.h with the kernel sources To get the changes in ba8308856564 ("arm64: add prctl control for resetting ptrauth keys"), that introduce a prctl with a name that needs to be catch by the prctl cmd table generator, which will be done in the next cset. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Kristina Martsenko Cc: Namhyung Kim Cc: Will Deacon Link: https://lkml.kernel.org/n/tip-a1pahzc8lci0ey1fjvv1chdm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/prctl.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h index b17201edfa09..b4875a93363a 100644 --- a/tools/include/uapi/linux/prctl.h +++ b/tools/include/uapi/linux/prctl.h @@ -220,4 +220,12 @@ struct prctl_mm_map { # define PR_SPEC_DISABLE (1UL << 2) # define PR_SPEC_FORCE_DISABLE (1UL << 3) +/* Reset arm64 pointer authentication keys */ +#define PR_PAC_RESET_KEYS 54 +# define PR_PAC_APIAKEY (1UL << 0) +# define PR_PAC_APIBKEY (1UL << 1) +# define PR_PAC_APDAKEY (1UL << 2) +# define PR_PAC_APDBKEY (1UL << 3) +# define PR_PAC_APGAKEY (1UL << 4) + #endif /* _LINUX_PRCTL_H */ From 805e4c8b61bd62f6d3f416c915cb9bb423835fee Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 3 Jan 2019 14:59:11 -0300 Subject: [PATCH 016/246] tools beauty: Make the prctl option table generator catch all PR_ options In ba8308856564 ("arm64: add prctl control for resetting ptrauth keys") the PR_PAC_RESET_KEYS prctl option was introduced, get that into the regex in addition to PR_GET_* and PR_SET_*: So just get everything that matches '^#define PR_\w+' this ends up adding these entries: $ tools/perf/trace/beauty/prctl_option.sh > after $ diff -u before after --- before 2019-01-03 14:58:51.541807353 -0300 +++ after 2019-01-03 15:17:05.909583804 -0300 @@ -19,12 +19,18 @@ [20] = "SET_ENDIAN", [21] = "GET_SECCOMP", [22] = "SET_SECCOMP", + [23] = "CAPBSET_READ", + [24] = "CAPBSET_DROP", [25] = "GET_TSC", [26] = "SET_TSC", [27] = "GET_SECUREBITS", [28] = "SET_SECUREBITS", [29] = "SET_TIMERSLACK", [30] = "GET_TIMERSLACK", + [31] = "TASK_PERF_EVENTS_DISABLE", + [32] = "TASK_PERF_EVENTS_ENABLE", + [33] = "MCE_KILL", + [34] = "MCE_KILL_GET", [35] = "SET_MM", [36] = "SET_CHILD_SUBREAPER", [37] = "GET_CHILD_SUBREAPER", @@ -33,8 +39,13 @@ [40] = "GET_TID_ADDRESS", [41] = "SET_THP_DISABLE", [42] = "GET_THP_DISABLE", + [43] = "MPX_ENABLE_MANAGEMENT", + [44] = "MPX_DISABLE_MANAGEMENT", [45] = "SET_FP_MODE", [46] = "GET_FP_MODE", + [47] = "CAP_AMBIENT", + [50] = "SVE_SET_VL", + [51] = "SVE_GET_VL", [52] = "GET_SPECULATION_CTRL", [53] = "SET_SPECULATION_CTRL", [54] = "PAC_RESET_KEYS", $ Cc: Adrian Hunter Cc: Jiri Olsa Cc: Kristina Martsenko Cc: Namhyung Kim Cc: Will Deacon Link: https://lkml.kernel.org/n/tip-sg2pkmtjr5988bhbcp4yp6sw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/trace/beauty/prctl_option.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/trace/beauty/prctl_option.sh b/tools/perf/trace/beauty/prctl_option.sh index d32f8f1124af..3109d7b05e11 100755 --- a/tools/perf/trace/beauty/prctl_option.sh +++ b/tools/perf/trace/beauty/prctl_option.sh @@ -4,7 +4,7 @@ [ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/linux/ printf "static const char *prctl_options[] = {\n" -regex='^#define[[:space:]]+PR_([GS]ET\w+)[[:space:]]*([[:xdigit:]]+).*' +regex='^#define[[:space:]]+PR_(\w+)[[:space:]]*([[:xdigit:]]+).*' egrep $regex ${header_dir}/prctl.h | grep -v PR_SET_PTRACER | \ sed -r "s/$regex/\2 \1/g" | \ sort -n | xargs printf "\t[%s] = \"%s\",\n" From 09ad32dc6dc23beb638c48d0a2e5a9eaa8e85c6c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 3 Jan 2019 11:30:07 +0100 Subject: [PATCH 017/246] cpuidle / Documentation: Update cpuidle MAINTAINERS entry Update the MAINTAINERS entry for cpuidle by making it clear that it is not just drivers and adding a documentation record to it. Signed-off-by: Rafael J. Wysocki --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7808b166fdb9..5cc9e96ff2c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3964,13 +3964,14 @@ S: Supported F: drivers/cpuidle/cpuidle-exynos.c F: arch/arm/mach-exynos/pm.c -CPUIDLE DRIVERS +CPU IDLE TIME MANAGEMENT FRAMEWORK M: "Rafael J. Wysocki" M: Daniel Lezcano L: linux-pm@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git B: https://bugzilla.kernel.org +F: Documentation/admin-guide/pm/cpuidle.rst F: drivers/cpuidle/* F: include/linux/cpuidle.h From 1690d8bb91e370ab772062b79bd434ce815c4729 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 4 Jan 2019 15:14:33 +0530 Subject: [PATCH 018/246] cpufreq: scpi/scmi: Fix freeing of dynamic OPPs Since the commit 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()", dynamically created OPP aren't automatically removed anymore by dev_pm_opp_cpumask_remove_table(). This affects the scpi and scmi cpufreq drivers which no longer free OPPs on failures or on invocations of the policy->exit() callback. Create a generic OPP helper dev_pm_opp_remove_all_dynamic() which can be called from these drivers instead of dev_pm_opp_cpumask_remove_table(). In dev_pm_opp_remove_all_dynamic(), we need to make sure that the opp_list isn't getting accessed simultaneously from other parts of the OPP core while the helper is freeing dynamic OPPs, i.e. we can't drop the opp_table->lock while traversing through the OPP list. And to accomplish that, this patch also creates _opp_kref_release_unlocked() which can be called from this new helper with the opp_table lock already held. Cc: 4.20 # v4.20 Reported-by: Valentin Schneider Fixes: 2a4eb7358aba "OPP: Don't remove dynamic OPPs from _dev_pm_opp_remove_table()" Signed-off-by: Viresh Kumar Tested-by: Valentin Schneider Reviewed-by: Sudeep Holla Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/scmi-cpufreq.c | 4 +-- drivers/cpufreq/scpi-cpufreq.c | 4 +-- drivers/opp/core.c | 63 +++++++++++++++++++++++++++++++--- include/linux/pm_opp.h | 5 +++ 4 files changed, 67 insertions(+), 9 deletions(-) diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index 50b1551ba894..c2e66528f5ee 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -176,7 +176,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) out_free_priv: kfree(priv); out_free_opp: - dev_pm_opp_cpumask_remove_table(policy->cpus); + dev_pm_opp_remove_all_dynamic(cpu_dev); return ret; } @@ -188,7 +188,7 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) cpufreq_cooling_unregister(priv->cdev); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); kfree(priv); - dev_pm_opp_cpumask_remove_table(policy->related_cpus); + dev_pm_opp_remove_all_dynamic(priv->cpu_dev); return 0; } diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c index 87a98ec77773..99449738faa4 100644 --- a/drivers/cpufreq/scpi-cpufreq.c +++ b/drivers/cpufreq/scpi-cpufreq.c @@ -177,7 +177,7 @@ out_free_cpufreq_table: out_free_priv: kfree(priv); out_free_opp: - dev_pm_opp_cpumask_remove_table(policy->cpus); + dev_pm_opp_remove_all_dynamic(cpu_dev); return ret; } @@ -190,7 +190,7 @@ static int scpi_cpufreq_exit(struct cpufreq_policy *policy) clk_put(priv->clk); dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); kfree(priv); - dev_pm_opp_cpumask_remove_table(policy->related_cpus); + dev_pm_opp_remove_all_dynamic(priv->cpu_dev); return 0; } diff --git a/drivers/opp/core.c b/drivers/opp/core.c index e5507add8f04..18f1639dbc4a 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -988,11 +988,9 @@ void _opp_free(struct dev_pm_opp *opp) kfree(opp); } -static void _opp_kref_release(struct kref *kref) +static void _opp_kref_release(struct dev_pm_opp *opp, + struct opp_table *opp_table) { - struct dev_pm_opp *opp = container_of(kref, struct dev_pm_opp, kref); - struct opp_table *opp_table = opp->opp_table; - /* * Notify the changes in the availability of the operable * frequency/voltage list. @@ -1002,7 +1000,22 @@ static void _opp_kref_release(struct kref *kref) opp_debug_remove_one(opp); list_del(&opp->node); kfree(opp); +} +static void _opp_kref_release_unlocked(struct kref *kref) +{ + struct dev_pm_opp *opp = container_of(kref, struct dev_pm_opp, kref); + struct opp_table *opp_table = opp->opp_table; + + _opp_kref_release(opp, opp_table); +} + +static void _opp_kref_release_locked(struct kref *kref) +{ + struct dev_pm_opp *opp = container_of(kref, struct dev_pm_opp, kref); + struct opp_table *opp_table = opp->opp_table; + + _opp_kref_release(opp, opp_table); mutex_unlock(&opp_table->lock); } @@ -1013,10 +1026,16 @@ void dev_pm_opp_get(struct dev_pm_opp *opp) void dev_pm_opp_put(struct dev_pm_opp *opp) { - kref_put_mutex(&opp->kref, _opp_kref_release, &opp->opp_table->lock); + kref_put_mutex(&opp->kref, _opp_kref_release_locked, + &opp->opp_table->lock); } EXPORT_SYMBOL_GPL(dev_pm_opp_put); +static void dev_pm_opp_put_unlocked(struct dev_pm_opp *opp) +{ + kref_put(&opp->kref, _opp_kref_release_unlocked); +} + /** * dev_pm_opp_remove() - Remove an OPP from OPP table * @dev: device for which we do this operation @@ -1060,6 +1079,40 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq) } EXPORT_SYMBOL_GPL(dev_pm_opp_remove); +/** + * dev_pm_opp_remove_all_dynamic() - Remove all dynamically created OPPs + * @dev: device for which we do this operation + * + * This function removes all dynamically created OPPs from the opp table. + */ +void dev_pm_opp_remove_all_dynamic(struct device *dev) +{ + struct opp_table *opp_table; + struct dev_pm_opp *opp, *temp; + int count = 0; + + opp_table = _find_opp_table(dev); + if (IS_ERR(opp_table)) + return; + + mutex_lock(&opp_table->lock); + list_for_each_entry_safe(opp, temp, &opp_table->opp_list, node) { + if (opp->dynamic) { + dev_pm_opp_put_unlocked(opp); + count++; + } + } + mutex_unlock(&opp_table->lock); + + /* Drop the references taken by dev_pm_opp_add() */ + while (count--) + dev_pm_opp_put_opp_table(opp_table); + + /* Drop the reference taken by _find_opp_table() */ + dev_pm_opp_put_opp_table(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic); + struct dev_pm_opp *_opp_allocate(struct opp_table *table) { struct dev_pm_opp *opp; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 0a2a88e5a383..b895f4e79868 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -108,6 +108,7 @@ void dev_pm_opp_put(struct dev_pm_opp *opp); int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt); void dev_pm_opp_remove(struct device *dev, unsigned long freq); +void dev_pm_opp_remove_all_dynamic(struct device *dev); int dev_pm_opp_enable(struct device *dev, unsigned long freq); @@ -217,6 +218,10 @@ static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq) { } +static inline void dev_pm_opp_remove_all_dynamic(struct device *dev) +{ +} + static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) { return 0; From 302df34c4e64b9e83ee31cbf508b38b62b428bd6 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 3 Jan 2019 17:13:49 +0100 Subject: [PATCH 019/246] tools thermal tmon: Use -O3 instead of -O1 if available Using -O3 instead of -O1 if it's supported by compiler. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Brian Norris Cc: Markus Mayer Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Zhang Rui Link: http://lkml.kernel.org/r/20190103161350.11446-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/thermal/tmon/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile index 89a2444c1df2..59e417ec3e13 100644 --- a/tools/thermal/tmon/Makefile +++ b/tools/thermal/tmon/Makefile @@ -6,7 +6,7 @@ VERSION = 1.0 BINDIR=usr/bin WARNFLAGS=-Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -override CFLAGS+= -O1 ${WARNFLAGS} +override CFLAGS+= $(call cc-option,-O3,-O1) ${WARNFLAGS} # Add "-fstack-protector" only if toolchain supports it. override CFLAGS+= $(call cc-option,-fstack-protector-strong) CC?= $(CROSS_COMPILE)gcc From 536cdb684d2d5139708d290b9dc124b1420886c1 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 3 Jan 2019 17:13:50 +0100 Subject: [PATCH 020/246] tools iio: Override CFLAGS assignments So user could specify outside CFLAGS values. Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Andy Shevchenko Cc: Hartmut Knaack Cc: Jonathan Cameron Cc: Lars-Peter Clausen Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190103161350.11446-3-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/iio/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/iio/Makefile b/tools/iio/Makefile index 332ed2f6c2c2..e22378dba244 100644 --- a/tools/iio/Makefile +++ b/tools/iio/Makefile @@ -12,7 +12,7 @@ endif # (this improves performance and avoids hard-to-debug behaviour); MAKEFLAGS += -r -CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include +override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include ALL_TARGETS := iio_event_monitor lsiio iio_generic_buffer ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) From 8858ecb5a28d871b79aa5b4eed45414b553a5b6e Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Jan 2019 11:36:10 -0300 Subject: [PATCH 021/246] tools headers uapi: Update i915_drm.h To get the changes in these csets: fe841686470d Revert "drm/i915/perf: add a parameter to control the size of OA buffer" cd956bfcd0f5 drm/i915/perf: add a parameter to control the size of OA buffer 4bdafb9ddfa4 drm/i915: Remove i915.enable_ppgtt override Not one of them result in any changes in tools/perf/, this is just to silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter Cc: Chris Wilson Cc: Jiri Olsa Cc: Joonas Lahtinen Cc: Lionel Landwerlin Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-mdw7ta6qz7d2rl77gf00uqe8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/drm/i915_drm.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index a4446f452040..298b2e197744 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -412,6 +412,14 @@ typedef struct drm_i915_irq_wait { int irq_seq; } drm_i915_irq_wait_t; +/* + * Different modes of per-process Graphics Translation Table, + * see I915_PARAM_HAS_ALIASING_PPGTT + */ +#define I915_GEM_PPGTT_NONE 0 +#define I915_GEM_PPGTT_ALIASING 1 +#define I915_GEM_PPGTT_FULL 2 + /* Ioctl to query kernel params: */ #define I915_PARAM_IRQ_ACTIVE 1 From 4001b6a080aaca9a13ea07ae8972b82fdbd9ea6b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Jan 2019 11:41:42 -0300 Subject: [PATCH 022/246] tools headers uapi: Sync linux/in.h copy from the kernel sources To get the changes in this cset: 65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl") The macros changed in this cset are not used in tools/, so this is just to silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: Dave Taht Cc: David S. Miller Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-smghvyxb3budqd1e70i0ylw1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/in.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/tools/include/uapi/linux/in.h b/tools/include/uapi/linux/in.h index 48e8a225b985..f6052e70bf40 100644 --- a/tools/include/uapi/linux/in.h +++ b/tools/include/uapi/linux/in.h @@ -266,10 +266,14 @@ struct sockaddr_in { #define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) #define IN_MULTICAST(a) IN_CLASSD(a) -#define IN_MULTICAST_NET 0xF0000000 +#define IN_MULTICAST_NET 0xe0000000 -#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) -#define IN_BADCLASS(a) IN_EXPERIMENTAL((a)) +#define IN_BADCLASS(a) ((((long int) (a) ) == 0xffffffff) +#define IN_EXPERIMENTAL(a) IN_BADCLASS((a)) + +#define IN_CLASSE(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) +#define IN_CLASSE_NET 0xffffffff +#define IN_CLASSE_NSHIFT 0 /* Address to accept any incoming messages. */ #define INADDR_ANY ((unsigned long int) 0x00000000) From 558517c52c87da91a963708fe589044172470653 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Jan 2019 11:45:03 -0300 Subject: [PATCH 023/246] tools headers uapi: Sync linux/kvm.h with the kernel sources To get the changes from these csets: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID") 2a31b9db1535 ("kvm: introduce manual dirty log reprotect") That results in these new KVM IOCTLs being supported in 'perf trace' when beautifying the cmd ioctl syscall argument: $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2019-01-04 11:44:23.506605301 -0300 +++ after 2019-01-04 11:44:36.878730583 -0300 @@ -86,6 +86,8 @@ [0xbd] = "HYPERV_EVENTFD", [0xbe] = "GET_NESTED_STATE", [0xbf] = "SET_NESTED_STATE", + [0xc0] = "CLEAR_DIRTY_LOG", + [0xc1] = "GET_SUPPORTED_HV_CPUID", [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", $ At some point we should be able to do something: # perf trace -e ioctl(cmd == KVM_CLEAR_DIRTY_LOG) And have just those ioctls, optionally with callchains, etc. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Paolo Bonzini Cc: Vitaly Kuznetsov Link: https://lkml.kernel.org/n/tip-konm3iigl2os6ritt7d2bori@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/kvm.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 2b7a652c9fa4..6d4ea4b6c922 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -492,6 +492,17 @@ struct kvm_dirty_log { }; }; +/* for KVM_CLEAR_DIRTY_LOG */ +struct kvm_clear_dirty_log { + __u32 slot; + __u32 num_pages; + __u64 first_page; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding2; + }; +}; + /* for KVM_SET_SIGNAL_MASK */ struct kvm_signal_mask { __u32 len; @@ -975,6 +986,8 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_HYPERV_ENLIGHTENED_VMCS 163 #define KVM_CAP_EXCEPTION_PAYLOAD 164 #define KVM_CAP_ARM_VM_IPA_SIZE 165 +#define KVM_CAP_MANUAL_DIRTY_LOG_PROTECT 166 +#define KVM_CAP_HYPERV_CPUID 167 #ifdef KVM_CAP_IRQ_ROUTING @@ -1421,6 +1434,12 @@ struct kvm_enc_region { #define KVM_GET_NESTED_STATE _IOWR(KVMIO, 0xbe, struct kvm_nested_state) #define KVM_SET_NESTED_STATE _IOW(KVMIO, 0xbf, struct kvm_nested_state) +/* Available with KVM_CAP_MANUAL_DIRTY_LOG_PROTECT */ +#define KVM_CLEAR_DIRTY_LOG _IOWR(KVMIO, 0xc0, struct kvm_clear_dirty_log) + +/* Available with KVM_CAP_HYPERV_CPUID */ +#define KVM_GET_SUPPORTED_HV_CPUID _IOWR(KVMIO, 0xc1, struct kvm_cpuid2) + /* Secure Encrypted Virtualization command */ enum sev_cmd_id { /* Guest initialization commands */ From 8c91fd605e1a66050c9c4dbc3e159a08e8c5f7d4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Jan 2019 12:08:31 -0300 Subject: [PATCH 024/246] tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources To get the changes in: b7d624ab4312 asm-generic: unistd.h: fixup broken macro include. 4e21565b7fd4 asm-generic: add kexec_file_load system call to unistd.h With this the 'kexec_file_load' syscall will be added to arm64's syscall table and will appear on the output of 'perf trace' on that platform. This silences this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Cc: Adrian Hunter Cc: AKASHI Takahiro Cc: Arnd Bergmann Cc: Guo Ren Cc: Jiri Olsa Cc: Namhyung Kim Cc: Will Deacon Link: https://lkml.kernel.org/n/tip-er8j7qhavtdw0kdga3zswynm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/asm-generic/unistd.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index c7f3321fbe43..d90127298f12 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -738,9 +738,11 @@ __SYSCALL(__NR_statx, sys_statx) __SC_COMP(__NR_io_pgetevents, sys_io_pgetevents, compat_sys_io_pgetevents) #define __NR_rseq 293 __SYSCALL(__NR_rseq, sys_rseq) +#define __NR_kexec_file_load 294 +__SYSCALL(__NR_kexec_file_load, sys_kexec_file_load) #undef __NR_syscalls -#define __NR_syscalls 294 +#define __NR_syscalls 295 /* * 32 bit systems traditionally used different From 86c22ab7227f59169f64275875c97ef495668b77 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Jan 2019 12:13:34 -0300 Subject: [PATCH 025/246] tools headers x86: Sync asm/cpufeatures.h copy with the kernel sources To get the changes from: a0aea130afeb ("KVM: x86: Add CPUID support for new instruction WBNOINVD") 20c3a2c33e9f ("x86/speculation: Add support for STIBP always-on preferred mode") Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Paolo Bonzini Cc: Robert Hoo Cc: Thomas Gleixner Cc: Thomas Lendacky Link: https://lkml.kernel.org/n/tip-aonti3bu9rhnqe5hlawbidcp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/x86/include/asm/cpufeatures.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/arch/x86/include/asm/cpufeatures.h b/tools/arch/x86/include/asm/cpufeatures.h index 28c4a502b419..6d6122524711 100644 --- a/tools/arch/x86/include/asm/cpufeatures.h +++ b/tools/arch/x86/include/asm/cpufeatures.h @@ -281,9 +281,11 @@ #define X86_FEATURE_CLZERO (13*32+ 0) /* CLZERO instruction */ #define X86_FEATURE_IRPERF (13*32+ 1) /* Instructions Retired Count */ #define X86_FEATURE_XSAVEERPTR (13*32+ 2) /* Always save/restore FP error pointers */ +#define X86_FEATURE_WBNOINVD (13*32+ 9) /* WBNOINVD instruction */ #define X86_FEATURE_AMD_IBPB (13*32+12) /* "" Indirect Branch Prediction Barrier */ #define X86_FEATURE_AMD_IBRS (13*32+14) /* "" Indirect Branch Restricted Speculation */ #define X86_FEATURE_AMD_STIBP (13*32+15) /* "" Single Thread Indirect Branch Predictors */ +#define X86_FEATURE_AMD_STIBP_ALWAYS_ON (13*32+17) /* "" Single Thread Indirect Branch Predictors always-on preferred */ #define X86_FEATURE_AMD_SSBD (13*32+24) /* "" Speculative Store Bypass Disable */ #define X86_FEATURE_VIRT_SSBD (13*32+25) /* Virtualized Speculative Store Bypass Disable */ #define X86_FEATURE_AMD_SSB_NO (13*32+26) /* "" Speculative Store Bypass is fixed in hardware. */ From a3366db06bb656cef2e03f30f780d93059bcc594 Mon Sep 17 00:00:00 2001 From: Jin Yao Date: Fri, 4 Jan 2019 14:10:30 +0800 Subject: [PATCH 026/246] perf report: Fix wrong iteration count in --branch-history By calculating the removed loops, we can get the iteration count. But the iteration count could be reported incorrectly, reporting impossibly high counts. That's because previous code uses the number of removed LBR entries for the iteration count. That's not good. Fix this by increasing the iteration count when a loop is detected. When matching the chain, the iteration count would be added up, finally we need to compute the average value when printing out. For example, $ perf report --branch-history --stdio --no-children Before: ---f2 +0 | |--33.62%--f1 +9 (cycles:1) | f1 +0 | main +22 (cycles:1) | main +17 | main +38 (cycles:1) | main +27 | f1 +26 (cycles:1) | f1 +24 | f2 +27 (cycles:7) | f2 +0 | f1 +19 (cycles:1) | f1 +14 | f2 +27 (cycles:11) | f2 +0 | f1 +9 (cycles:1 iter:2968 avg_cycles:3) | f1 +0 | main +22 (cycles:1 iter:2968 avg_cycles:3) | main +17 | main +38 (cycles:1 iter:2968 avg_cycles:3) 2968 is an impossible high iteration count and avg_cycles is too small. After: ---f2 +0 | |--33.62%--f1 +9 (cycles:1) | f1 +0 | main +22 (cycles:1) | main +17 | main +38 (cycles:1) | main +27 | f1 +26 (cycles:1) | f1 +24 | f2 +27 (cycles:7) | f2 +0 | f1 +19 (cycles:1) | f1 +14 | f2 +27 (cycles:11) | f2 +0 | f1 +9 (cycles:1 iter:1 avg_cycles:23) | f1 +0 | main +22 (cycles:1 iter:1 avg_cycles:23) | main +17 | main +38 (cycles:1 iter:1 avg_cycles:23) avg_cycles:23 is the average cycles of this iteration. Fixes: c4ee06251d42 ("perf report: Calculate the average cycles of iterations") Signed-off-by: Jin Yao Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1546582230-17507-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/callchain.c | 32 ++++++++++++++++++++------------ tools/perf/util/callchain.h | 1 + tools/perf/util/machine.c | 2 +- 3 files changed, 22 insertions(+), 13 deletions(-) diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c index 32ef7bdca1cf..dc2212e12184 100644 --- a/tools/perf/util/callchain.c +++ b/tools/perf/util/callchain.c @@ -766,6 +766,7 @@ static enum match_result match_chain(struct callchain_cursor_node *node, cnode->cycles_count += node->branch_flags.cycles; cnode->iter_count += node->nr_loop_iter; cnode->iter_cycles += node->iter_cycles; + cnode->from_count++; } } @@ -1345,10 +1346,10 @@ static int branch_to_str(char *bf, int bfsize, static int branch_from_str(char *bf, int bfsize, u64 branch_count, u64 cycles_count, u64 iter_count, - u64 iter_cycles) + u64 iter_cycles, u64 from_count) { int printed = 0, i = 0; - u64 cycles; + u64 cycles, v = 0; cycles = cycles_count / branch_count; if (cycles) { @@ -1357,14 +1358,16 @@ static int branch_from_str(char *bf, int bfsize, bf + printed, bfsize - printed); } - if (iter_count) { - printed += count_pri64_printf(i++, "iter", - iter_count, - bf + printed, bfsize - printed); + if (iter_count && from_count) { + v = iter_count / from_count; + if (v) { + printed += count_pri64_printf(i++, "iter", + v, bf + printed, bfsize - printed); - printed += count_pri64_printf(i++, "avg_cycles", - iter_cycles / iter_count, - bf + printed, bfsize - printed); + printed += count_pri64_printf(i++, "avg_cycles", + iter_cycles / iter_count, + bf + printed, bfsize - printed); + } } if (i) @@ -1377,6 +1380,7 @@ static int counts_str_build(char *bf, int bfsize, u64 branch_count, u64 predicted_count, u64 abort_count, u64 cycles_count, u64 iter_count, u64 iter_cycles, + u64 from_count, struct branch_type_stat *brtype_stat) { int printed; @@ -1389,7 +1393,8 @@ static int counts_str_build(char *bf, int bfsize, predicted_count, abort_count, brtype_stat); } else { printed = branch_from_str(bf, bfsize, branch_count, - cycles_count, iter_count, iter_cycles); + cycles_count, iter_count, iter_cycles, + from_count); } if (!printed) @@ -1402,13 +1407,14 @@ static int callchain_counts_printf(FILE *fp, char *bf, int bfsize, u64 branch_count, u64 predicted_count, u64 abort_count, u64 cycles_count, u64 iter_count, u64 iter_cycles, + u64 from_count, struct branch_type_stat *brtype_stat) { char str[256]; counts_str_build(str, sizeof(str), branch_count, predicted_count, abort_count, cycles_count, - iter_count, iter_cycles, brtype_stat); + iter_count, iter_cycles, from_count, brtype_stat); if (fp) return fprintf(fp, "%s", str); @@ -1422,6 +1428,7 @@ int callchain_list_counts__printf_value(struct callchain_list *clist, u64 branch_count, predicted_count; u64 abort_count, cycles_count; u64 iter_count, iter_cycles; + u64 from_count; branch_count = clist->branch_count; predicted_count = clist->predicted_count; @@ -1429,11 +1436,12 @@ int callchain_list_counts__printf_value(struct callchain_list *clist, cycles_count = clist->cycles_count; iter_count = clist->iter_count; iter_cycles = clist->iter_cycles; + from_count = clist->from_count; return callchain_counts_printf(fp, bf, bfsize, branch_count, predicted_count, abort_count, cycles_count, iter_count, iter_cycles, - &clist->brtype_stat); + from_count, &clist->brtype_stat); } static void free_callchain_node(struct callchain_node *node) diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h index 154560b1eb65..99d38ac019b8 100644 --- a/tools/perf/util/callchain.h +++ b/tools/perf/util/callchain.h @@ -118,6 +118,7 @@ struct callchain_list { bool has_children; }; u64 branch_count; + u64 from_count; u64 predicted_count; u64 abort_count; u64 cycles_count; diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index 6fcb3bce0442..143f7057d581 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -2005,7 +2005,7 @@ static void save_iterations(struct iterations *iter, { int i; - iter->nr_loop_iter = nr; + iter->nr_loop_iter++; iter->cycles = 0; for (i = 0; i < nr; i++) From 442b4eb3af44906fcbb526d98c314b27f8c9acf3 Mon Sep 17 00:00:00 2001 From: Ivan Krylov Date: Sun, 14 Oct 2018 11:18:03 +0300 Subject: [PATCH 027/246] perf annotate: Pass filename to objdump via execl The symbol__disassemble() function uses shell to launch objdump and filter its output via grep. Passing filenames by interpolating them into the command line via "%s" may lead to problems if said filenames contain special characters. Instead, pass the filename as a command line argument where it is not subject to any kind of interpretation, then use quoted shell interpolation to build the strings we need safely. Signed-off-by: Ivan Krylov Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20181014111803.5d83b806@Tarkus Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/annotate.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index ac9805e0bc76..70de8f6b3aee 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -1723,15 +1723,14 @@ static int symbol__disassemble(struct symbol *sym, struct annotate_args *args) err = asprintf(&command, "%s %s%s --start-address=0x%016" PRIx64 " --stop-address=0x%016" PRIx64 - " -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand", + " -l -d %s %s -C \"$1\" 2>/dev/null|grep -v \"$1:\"|expand", opts->objdump_path ?: "objdump", opts->disassembler_style ? "-M " : "", opts->disassembler_style ?: "", map__rip_2objdump(map, sym->start), map__rip_2objdump(map, sym->end), opts->show_asm_raw ? "" : "--no-show-raw", - opts->annotate_src ? "-S" : "", - symfs_filename, symfs_filename); + opts->annotate_src ? "-S" : ""); if (err < 0) { pr_err("Failure allocating memory for the command to run\n"); @@ -1756,7 +1755,8 @@ static int symbol__disassemble(struct symbol *sym, struct annotate_args *args) close(stdout_fd[0]); dup2(stdout_fd[1], 1); close(stdout_fd[1]); - execl("/bin/sh", "sh", "-c", command, NULL); + execl("/bin/sh", "sh", "-c", command, "--", symfs_filename, + NULL); perror(command); exit(-1); } From 099be748865eece21362aee416c350c0b1ae34df Mon Sep 17 00:00:00 2001 From: Mattias Jacobsson <2pi@mok.nu> Date: Sat, 29 Dec 2018 15:17:50 +0100 Subject: [PATCH 028/246] perf strbuf: Remove redundant va_end() in strbuf_addv() Each call to va_copy() should have one, and only one, corresponding call to va_end(). In strbuf_addv() some code paths result in va_end() getting called multiple times. Remove the superfluous va_end(). Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Cc: Jiri Olsa Cc: Peter Zijlstra Cc: Sanskriti Sharma Link: http://lkml.kernel.org/r/20181229141750.16945-1-2pi@mok.nu Fixes: ce49d8436cff ("perf strbuf: Match va_{add,copy} with va_end") Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/strbuf.c | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c index 9005fbe0780e..23092fd6451d 100644 --- a/tools/perf/util/strbuf.c +++ b/tools/perf/util/strbuf.c @@ -109,7 +109,6 @@ static int strbuf_addv(struct strbuf *sb, const char *fmt, va_list ap) return ret; } len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap_saved); - va_end(ap_saved); if (len > strbuf_avail(sb)) { pr_debug("this should not happen, your vsnprintf is broken"); va_end(ap_saved); From f712a86c1406abf50b0dcff0500c723e2aca050a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 3 Jan 2019 16:03:46 -0300 Subject: [PATCH 029/246] perf python: Make sure the python binding output directory is in place Instead of doing an unconditional mkdir, use a dummy Makefile variable to check if the directory is there and if not, create it. This is better than what we had and will help with other python bindings that are in development, like one involved with python backtraces. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-iis6us2nocw3y4uuoon9osd7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.perf | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index ff29c3372ec3..2921f829a0f4 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -524,12 +524,14 @@ $(arch_errno_name_array): $(arch_errno_tbl) all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS) +# Create python binding output directory if not already present +_dummy := $(shell [ -d '$(OUTPUT)python' ] || mkdir -p '$(OUTPUT)python') + $(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(LIBTRACEEVENT_DYNAMIC_LIST) $(QUIET_GEN)LDSHARED="$(CC) -pthread -shared" \ CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS) $(LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS)' \ $(PYTHON_WORD) util/setup.py \ --quiet build_ext; \ - mkdir -p $(OUTPUT)python && \ cp $(PYTHON_EXTBUILD_LIB)perf*.so $(OUTPUT)python/ please_set_SHELL_PATH_to_a_more_modern_shell: From 03fa483821c0b4db7c2b1453d3332f397d82313f Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Jan 2019 15:10:00 -0300 Subject: [PATCH 030/246] perf test shell: Use a fallback to get the pathname in vfs_getname Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the existing probe definition asking for the contents of result->name, working when we ask for the 'filename' variable instead, so add a fallback to that. Now those tests are back working on fedora 29 systems with that kernel: # perf test vfs_getname 65: Use vfs_getname probe to get syscall args filenames : Ok 66: Add vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok # Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/tests/shell/lib/probe_vfs_getname.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/tests/shell/lib/probe_vfs_getname.sh b/tools/perf/tests/shell/lib/probe_vfs_getname.sh index 1c16e56cd93e..7cb99b433888 100644 --- a/tools/perf/tests/shell/lib/probe_vfs_getname.sh +++ b/tools/perf/tests/shell/lib/probe_vfs_getname.sh @@ -13,7 +13,8 @@ add_probe_vfs_getname() { local verbose=$1 if [ $had_vfs_getname -eq 1 ] ; then line=$(perf probe -L getname_flags 2>&1 | egrep 'result.*=.*filename;' | sed -r 's/[[:space:]]+([[:digit:]]+)[[:space:]]+result->uptr.*/\1/') - perf probe $verbose "vfs_getname=getname_flags:${line} pathname=result->name:string" + perf probe -q "vfs_getname=getname_flags:${line} pathname=result->name:string" || \ + perf probe $verbose "vfs_getname=getname_flags:${line} pathname=filename:string" fi } From bb351abaf5cd4f9237e1b3094d9cc04853de6d95 Mon Sep 17 00:00:00 2001 From: Weiping Zhang Date: Wed, 26 Dec 2018 11:56:33 +0800 Subject: [PATCH 031/246] block: add documentation for io_timeout Add documentation for /sys/block//queue/io_timeout. Reviewed-by: Bart Van Assche Signed-off-by: Weiping Zhang Signed-off-by: Jens Axboe --- Documentation/ABI/testing/sysfs-block | 9 +++++++++ Documentation/block/queue-sysfs.txt | 7 +++++++ 2 files changed, 16 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index 7710d4022b19..dfad7427817c 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -279,3 +279,12 @@ Description: size in 512B sectors of the zones of the device, with the eventual exception of the last zone of the device which may be smaller. + +What: /sys/block//queue/io_timeout +Date: November 2018 +Contact: Weiping Zhang +Description: + io_timeout is the request timeout in milliseconds. If a request + does not complete in this time then the block driver timeout + handler is invoked. That timeout handler can decide to retry + the request, to fail it or to start a device recovery strategy. diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 39e286d7afc9..83b457e24bba 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -67,6 +67,13 @@ If set to a value larger than 0, the kernel will put the process issuing IO to sleep for this amount of microseconds before entering classic polling. +io_timeout (RW) +--------------- +io_timeout is the request timeout in milliseconds. If a request does not +complete in this time then the block driver timeout handler is invoked. +That timeout handler can decide to retry the request, to fail it or to start +a device recovery strategy. + iostats (RW) ------------- This file is used to control (on/off) the iostats accounting of the From 373282e7ab6840cd583a223fa90628f2d8293c26 Mon Sep 17 00:00:00 2001 From: John Pittman Date: Fri, 4 Jan 2019 12:06:37 -0500 Subject: [PATCH 032/246] null_blk: add zoned config support information If the kernel is built without CONFIG_BLK_DEV_ZONED, a modprobe of the null_blk driver with zoned=1 fails with 'Invalid argument'. This can be confusing to users, prompting a search as to why the parameter is invalid. To assist in that search, add a bit more information to the failure, additionally adding to the documentation that CONFIG_BLK_DEV_ZONED is needed for zoned=1. Reviewed-by: Bart Van Assche Signed-off-by: John Pittman Added null_blk prefix to error message. Signed-off-by: Jens Axboe --- Documentation/block/null_blk.txt | 3 ++- drivers/block/null_blk.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/block/null_blk.txt b/Documentation/block/null_blk.txt index ea2dafe49ae8..4cad1024fff7 100644 --- a/Documentation/block/null_blk.txt +++ b/Documentation/block/null_blk.txt @@ -88,7 +88,8 @@ shared_tags=[0/1]: Default: 0 zoned=[0/1]: Default: 0 0: Block device is exposed as a random-access block device. - 1: Block device is exposed as a host-managed zoned block device. + 1: Block device is exposed as a host-managed zoned block device. Requires + CONFIG_BLK_DEV_ZONED. zone_size=[MB]: Default: 256 Per zone size when exposed as a zoned block device. Must be a power of two. diff --git a/drivers/block/null_blk.h b/drivers/block/null_blk.h index b3df2793e7cd..34b22d6523ba 100644 --- a/drivers/block/null_blk.h +++ b/drivers/block/null_blk.h @@ -97,6 +97,7 @@ void null_zone_reset(struct nullb_cmd *cmd, sector_t sector); #else static inline int null_zone_init(struct nullb_device *dev) { + pr_err("null_blk: CONFIG_BLK_DEV_ZONED not enabled\n"); return -EINVAL; } static inline void null_zone_exit(struct nullb_device *dev) {} From 3bd6e94bec122a951d462c239b47954cf5f36e33 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 7 Jan 2019 11:08:08 +0900 Subject: [PATCH 033/246] arch: restore generic-y += shmparam.h for some architectures For some reasons, I accidentally got rid of "generic-y += shmparam.h" from some architectures. Restore them to fix building c6x, h8300, hexagon, m68k, microblaze, openrisc, and unicore32. Fixes: d6e4b3e326d8 ("arch: remove redundant UAPI generic-y defines") Signed-off-by: Masahiro Yamada Signed-off-by: Linus Torvalds --- arch/c6x/include/uapi/asm/Kbuild | 1 + arch/h8300/include/uapi/asm/Kbuild | 1 + arch/hexagon/include/uapi/asm/Kbuild | 1 + arch/m68k/include/uapi/asm/Kbuild | 1 + arch/microblaze/include/uapi/asm/Kbuild | 1 + arch/openrisc/include/uapi/asm/Kbuild | 1 + arch/unicore32/include/uapi/asm/Kbuild | 1 + 7 files changed, 7 insertions(+) diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild index 0febf1a07c30..6c6f6301012e 100644 --- a/arch/c6x/include/uapi/asm/Kbuild +++ b/arch/c6x/include/uapi/asm/Kbuild @@ -1,4 +1,5 @@ include include/uapi/asm-generic/Kbuild.asm generic-y += kvm_para.h +generic-y += shmparam.h generic-y += ucontext.h diff --git a/arch/h8300/include/uapi/asm/Kbuild b/arch/h8300/include/uapi/asm/Kbuild index 0febf1a07c30..6c6f6301012e 100644 --- a/arch/h8300/include/uapi/asm/Kbuild +++ b/arch/h8300/include/uapi/asm/Kbuild @@ -1,4 +1,5 @@ include include/uapi/asm-generic/Kbuild.asm generic-y += kvm_para.h +generic-y += shmparam.h generic-y += ucontext.h diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild index c1b06dcf6cf8..61d955c1747a 100644 --- a/arch/hexagon/include/uapi/asm/Kbuild +++ b/arch/hexagon/include/uapi/asm/Kbuild @@ -1,3 +1,4 @@ include include/uapi/asm-generic/Kbuild.asm +generic-y += shmparam.h generic-y += ucontext.h diff --git a/arch/m68k/include/uapi/asm/Kbuild b/arch/m68k/include/uapi/asm/Kbuild index 960bf1e4be53..b8b3525271fa 100644 --- a/arch/m68k/include/uapi/asm/Kbuild +++ b/arch/m68k/include/uapi/asm/Kbuild @@ -2,3 +2,4 @@ include include/uapi/asm-generic/Kbuild.asm generated-y += unistd_32.h generic-y += kvm_para.h +generic-y += shmparam.h diff --git a/arch/microblaze/include/uapi/asm/Kbuild b/arch/microblaze/include/uapi/asm/Kbuild index 97823ec46e97..28823e3db825 100644 --- a/arch/microblaze/include/uapi/asm/Kbuild +++ b/arch/microblaze/include/uapi/asm/Kbuild @@ -2,4 +2,5 @@ include include/uapi/asm-generic/Kbuild.asm generated-y += unistd_32.h generic-y += kvm_para.h +generic-y += shmparam.h generic-y += ucontext.h diff --git a/arch/openrisc/include/uapi/asm/Kbuild b/arch/openrisc/include/uapi/asm/Kbuild index 0febf1a07c30..6c6f6301012e 100644 --- a/arch/openrisc/include/uapi/asm/Kbuild +++ b/arch/openrisc/include/uapi/asm/Kbuild @@ -1,4 +1,5 @@ include include/uapi/asm-generic/Kbuild.asm generic-y += kvm_para.h +generic-y += shmparam.h generic-y += ucontext.h diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild index 0febf1a07c30..6c6f6301012e 100644 --- a/arch/unicore32/include/uapi/asm/Kbuild +++ b/arch/unicore32/include/uapi/asm/Kbuild @@ -1,4 +1,5 @@ include include/uapi/asm-generic/Kbuild.asm generic-y += kvm_para.h +generic-y += shmparam.h generic-y += ucontext.h From de96e9fea7ba56042f105b6fe163447b280eb800 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 3 Jan 2019 10:23:47 +0100 Subject: [PATCH 034/246] sysfs: convert BUG_ON to WARN_ON It's rude to crash the system just because the developer did something wrong, as it prevents them from usually even seeing what went wrong. So convert the few BUG_ON() calls that have snuck into the sysfs code over the years to WARN_ON() to make it more "friendly". All of these are able to be recovered from, so it makes no sense to crash. Reported-by: Linus Torvalds Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/dir.c | 3 ++- fs/sysfs/file.c | 6 ++++-- fs/sysfs/group.c | 3 ++- fs/sysfs/symlink.c | 3 ++- 4 files changed, 10 insertions(+), 5 deletions(-) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index feeae8081c22..aa85f2874a9f 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -43,7 +43,8 @@ int sysfs_create_dir_ns(struct kobject *kobj, const void *ns) kuid_t uid; kgid_t gid; - BUG_ON(!kobj); + if (WARN_ON(!kobj)) + return -EINVAL; if (kobj->parent) parent = kobj->parent->sd; diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index bb71db63c99c..51398457fe00 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -325,7 +325,8 @@ int sysfs_create_file_ns(struct kobject *kobj, const struct attribute *attr, kuid_t uid; kgid_t gid; - BUG_ON(!kobj || !kobj->sd || !attr); + if (WARN_ON(!kobj || !kobj->sd || !attr)) + return -EINVAL; kobject_get_ownership(kobj, &uid, &gid); return sysfs_add_file_mode_ns(kobj->sd, attr, false, attr->mode, @@ -537,7 +538,8 @@ int sysfs_create_bin_file(struct kobject *kobj, kuid_t uid; kgid_t gid; - BUG_ON(!kobj || !kobj->sd || !attr); + if (WARN_ON(!kobj || !kobj->sd || !attr)) + return -EINVAL; kobject_get_ownership(kobj, &uid, &gid); return sysfs_add_file_mode_ns(kobj->sd, &attr->attr, true, diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c index 1eb2d6307663..57038604d4a8 100644 --- a/fs/sysfs/group.c +++ b/fs/sysfs/group.c @@ -112,7 +112,8 @@ static int internal_create_group(struct kobject *kobj, int update, kgid_t gid; int error; - BUG_ON(!kobj || (!update && !kobj->sd)); + if (WARN_ON(!kobj || (!update && !kobj->sd))) + return -EINVAL; /* Updates may happen before the object has been instantiated */ if (unlikely(update && !kobj->sd)) diff --git a/fs/sysfs/symlink.c b/fs/sysfs/symlink.c index 215c225b2ca1..c4deecc80f67 100644 --- a/fs/sysfs/symlink.c +++ b/fs/sysfs/symlink.c @@ -23,7 +23,8 @@ static int sysfs_do_create_link_sd(struct kernfs_node *parent, { struct kernfs_node *kn, *target = NULL; - BUG_ON(!name || !parent); + if (WARN_ON(!name || !parent)) + return -EINVAL; /* * We don't own @target_kobj and it may be removed at any time. From f4351a199cc120ff9d59e06d02e8657d08e6cc46 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 19 Dec 2018 12:36:27 +0100 Subject: [PATCH 035/246] ALSA: usb-audio: Avoid access before bLength check in build_audio_procunit() The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index c63c84b54969..0131de348cf6 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2314,7 +2314,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, char *name) { struct uac_processing_unit_descriptor *desc = raw_desc; - int num_ins = desc->bNrInPins; + int num_ins; struct usb_mixer_elem_info *cval; struct snd_kcontrol *kctl; int i, err, nameid, type, len; @@ -2329,7 +2329,13 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, 0, NULL, default_value_info }; - if (desc->bLength < 13 || desc->bLength < 13 + num_ins || + if (desc->bLength < 13) { + usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid); + return -EINVAL; + } + + num_ins = desc->bNrInPins; + if (desc->bLength < 13 + num_ins || desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) { usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid); return -EINVAL; From 0bfe5e434e6665b3590575ec3c5e4f86a1ce51c9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 19 Dec 2018 14:04:47 +0100 Subject: [PATCH 036/246] ALSA: usb-audio: Check mixer unit descriptors more strictly We've had some sanity checks of the mixer unit descriptors but they are too loose and some corner cases are overlooked. Add more strict checks in uac_mixer_unit_get_channels() for avoiding possible OOB accesses by malformed descriptors. This also changes the semantics of uac_mixer_unit_get_channels() slightly. Now it returns zero for the cases where the descriptor lacks of bmControls instead of -EINVAL. Then the caller side skips the mixer creation for such unit while it keeps parsing it. This corresponds to the case like Maya44. Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 0131de348cf6..dfd918891e69 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -753,8 +753,9 @@ static int uac_mixer_unit_get_channels(struct mixer_build *state, struct uac_mixer_unit_descriptor *desc) { int mu_channels; + void *c; - if (desc->bLength < 11) + if (desc->bLength < sizeof(*desc)) return -EINVAL; if (!desc->bNrInPins) return -EINVAL; @@ -763,6 +764,8 @@ static int uac_mixer_unit_get_channels(struct mixer_build *state, case UAC_VERSION_1: case UAC_VERSION_2: default: + if (desc->bLength < sizeof(*desc) + desc->bNrInPins + 1) + return 0; /* no bmControls -> skip */ mu_channels = uac_mixer_unit_bNrChannels(desc); break; case UAC_VERSION_3: @@ -772,7 +775,11 @@ static int uac_mixer_unit_get_channels(struct mixer_build *state, } if (!mu_channels) - return -EINVAL; + return 0; + + c = uac_mixer_unit_bmControls(desc, state->mixer->protocol); + if (c - (void *)desc + (mu_channels - 1) / 8 >= desc->bLength) + return 0; /* no bmControls -> skip */ return mu_channels; } @@ -944,7 +951,7 @@ static int check_input_term(struct mixer_build *state, int id, struct uac_mixer_unit_descriptor *d = p1; err = uac_mixer_unit_get_channels(state, d); - if (err < 0) + if (err <= 0) return err; term->channels = err; @@ -2118,7 +2125,7 @@ static int parse_audio_mixer_unit(struct mixer_build *state, int unitid, if (err < 0) continue; /* no bmControls field (e.g. Maya44) -> ignore */ - if (desc->bLength <= 10 + input_pins) + if (!num_outs) continue; err = check_input_term(state, desc->baSourceID[pin], &iterm); if (err < 0) From 3e96d7280f16e2f787307f695a31296b9e4a1cd7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 2 Jan 2019 17:12:21 +0100 Subject: [PATCH 037/246] ALSA: usb-audio: Always check descriptor sizes in parser code There are a few places where we access the data without checking the actual object size from the USB audio descriptor. This may result in OOB access, as recently reported. This patch addresses these missing checks. Most of added codes are simple bLength checks in the caller side. For the input and output terminal parsers, we put the length check in the parser functions. For the input terminal, a new argument is added to distinguish between UAC1 and the rest, as they treat different objects. Reported-by: Mathias Payer Reported-by: Hui Peng Tested-by: Hui Peng Cc: Signed-off-by: Takashi Iwai --- sound/usb/card.c | 2 +- sound/usb/mixer.c | 4 ++++ sound/usb/stream.c | 36 +++++++++++++++++++++++++----------- 3 files changed, 30 insertions(+), 12 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index a105947eaf55..746a72e23cf9 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -246,7 +246,7 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif) h1 = snd_usb_find_csint_desc(host_iface->extra, host_iface->extralen, NULL, UAC_HEADER); - if (!h1) { + if (!h1 || h1->bLength < sizeof(*h1)) { dev_err(&dev->dev, "cannot find UAC_HEADER\n"); return -EINVAL; } diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index dfd918891e69..e7d441d0e839 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2075,11 +2075,15 @@ static int parse_audio_input_terminal(struct mixer_build *state, int unitid, if (state->mixer->protocol == UAC_VERSION_2) { struct uac2_input_terminal_descriptor *d_v2 = raw_desc; + if (d_v2->bLength < sizeof(*d_v2)) + return -EINVAL; control = UAC2_TE_CONNECTOR; term_id = d_v2->bTerminalID; bmctls = le16_to_cpu(d_v2->bmControls); } else if (state->mixer->protocol == UAC_VERSION_3) { struct uac3_input_terminal_descriptor *d_v3 = raw_desc; + if (d_v3->bLength < sizeof(*d_v3)) + return -EINVAL; control = UAC3_TE_INSERTION; term_id = d_v3->bTerminalID; bmctls = le32_to_cpu(d_v3->bmControls); diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 67cf849aa16b..d9e3de495c16 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -596,12 +596,8 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip, csep = snd_usb_find_desc(alts->extra, alts->extralen, NULL, USB_DT_CS_ENDPOINT); if (!csep || csep->bLength < 7 || - csep->bDescriptorSubtype != UAC_EP_GENERAL) { - usb_audio_warn(chip, - "%u:%d : no or invalid class specific endpoint descriptor\n", - iface_no, altsd->bAlternateSetting); - return 0; - } + csep->bDescriptorSubtype != UAC_EP_GENERAL) + goto error; if (protocol == UAC_VERSION_1) { attributes = csep->bmAttributes; @@ -609,6 +605,8 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip, struct uac2_iso_endpoint_descriptor *csep2 = (struct uac2_iso_endpoint_descriptor *) csep; + if (csep2->bLength < sizeof(*csep2)) + goto error; attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX; /* emulate the endpoint attributes of a v1 device */ @@ -618,12 +616,20 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip, struct uac3_iso_endpoint_descriptor *csep3 = (struct uac3_iso_endpoint_descriptor *) csep; + if (csep3->bLength < sizeof(*csep3)) + goto error; /* emulate the endpoint attributes of a v1 device */ if (le32_to_cpu(csep3->bmControls) & UAC2_CONTROL_PITCH) attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL; } return attributes; + + error: + usb_audio_warn(chip, + "%u:%d : no or invalid class specific endpoint descriptor\n", + iface_no, altsd->bAlternateSetting); + return 0; } /* find an input terminal descriptor (either UAC1 or UAC2) with the given @@ -631,13 +637,17 @@ static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip, */ static void * snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface, - int terminal_id) + int terminal_id, bool uac23) { struct uac2_input_terminal_descriptor *term = NULL; + size_t minlen = uac23 ? sizeof(struct uac2_input_terminal_descriptor) : + sizeof(struct uac_input_terminal_descriptor); while ((term = snd_usb_find_csint_desc(ctrl_iface->extra, ctrl_iface->extralen, term, UAC_INPUT_TERMINAL))) { + if (term->bLength < minlen) + continue; if (term->bTerminalID == terminal_id) return term; } @@ -655,7 +665,8 @@ snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface, while ((term = snd_usb_find_csint_desc(ctrl_iface->extra, ctrl_iface->extralen, term, UAC_OUTPUT_TERMINAL))) { - if (term->bTerminalID == terminal_id) + if (term->bLength >= sizeof(*term) && + term->bTerminalID == terminal_id) return term; } @@ -729,7 +740,8 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, format = le16_to_cpu(as->wFormatTag); /* remember the format value */ iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, - as->bTerminalLink); + as->bTerminalLink, + false); if (iterm) { num_channels = iterm->bNrChannels; chconfig = le16_to_cpu(iterm->wChannelConfig); @@ -764,7 +776,8 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip, * to extract the clock */ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, - as->bTerminalLink); + as->bTerminalLink, + true); if (input_term) { clock = input_term->bCSourceID; if (!chconfig && (num_channels == input_term->bNrChannels)) @@ -998,7 +1011,8 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip, * to extract the clock */ input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, - as->bTerminalLink); + as->bTerminalLink, + true); if (input_term) { clock = input_term->bCSourceID; goto found_clock; From cbb2ebf70daf7f7d97d3811a2ff8e39655b8c184 Mon Sep 17 00:00:00 2001 From: Hui Peng Date: Tue, 25 Dec 2018 18:11:52 -0500 Subject: [PATCH 038/246] ALSA: usb-audio: Fix an out-of-bound read in create_composite_quirks In `create_composite_quirk`, the terminating condition of for loops is `quirk->ifnum < 0`. So any composite quirks should end with `struct snd_usb_audio_quirk` object with ifnum < 0. for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { ..... } the data field of Bower's & Wilkins PX headphones usb device device quirks do not end with {.ifnum = -1}, wihch may result in out-of-bound read. This Patch fix the bug by adding an ending quirk object. Fixes: 240a8af929c7 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Hui Peng Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 37fc0447c071..b345beb447bd 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3326,6 +3326,9 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, + { + .ifnum = -1 + }, } } }, @@ -3369,6 +3372,9 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, + { + .ifnum = -1 + }, } } }, From 605c0351fa36e857e29d34ebab2719d9c04e95f6 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 2 Jan 2019 14:02:08 -0600 Subject: [PATCH 039/246] MAINTAINERS: Add entry for staging driver r8188eu This entry was missed when the driver was added. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 32d444476a90..5c7ea0d96dd9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14432,6 +14432,11 @@ M: Florian Schilhabel . S: Odd Fixes F: drivers/staging/rtl8712/ +STAGING - REALTEK RTL8188EU DRIVERS +M: Larry Finger +S: Odd Fixes +F: drivers/staging/rtl8188eu/ + STAGING - SILICON MOTION SM750 FRAME BUFFER DRIVER M: Sudip Mukherjee M: Teddy Wang From c2a7c55a04065c3b0c32d23b099db7ea1dbf6250 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Thu, 3 Jan 2019 15:53:39 +0800 Subject: [PATCH 040/246] ALSA: hda/realtek - Support Dell headset mode for New AIO platform Dell has new platform for ALC274. This will support to enable headset mode. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index aee4cbd29d53..396ec43a2a54 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6584,6 +6584,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0871, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0872, "Dell Precision 3630", ALC255_FIXUP_DELL_HEADSET_MIC), SND_PCI_QUIRK(0x1028, 0x0873, "Dell Precision 3930", ALC255_FIXUP_DUMMY_LINEOUT_VERB), + SND_PCI_QUIRK(0x1028, 0x0935, "Dell", ALC274_FIXUP_DELL_AIO_LINEOUT_VERB), SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), From 2b531d71595d2b5b12782a49b23c335869e2621e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 4 Jan 2019 23:10:54 +0100 Subject: [PATCH 041/246] ACPI / PMIC: xpower: Fix TS-pin current-source handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pmic/intel_pmic_xpower.c | 41 +++++++++++++++++++++------ 1 file changed, 33 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c index 2579675b7082..e7c0006e6602 100644 --- a/drivers/acpi/pmic/intel_pmic_xpower.c +++ b/drivers/acpi/pmic/intel_pmic_xpower.c @@ -20,8 +20,11 @@ #define GPI1_LDO_ON (3 << 0) #define GPI1_LDO_OFF (4 << 0) -#define AXP288_ADC_TS_PIN_GPADC 0xf2 -#define AXP288_ADC_TS_PIN_ON 0xf3 +#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0) +#define AXP288_ADC_TS_CURRENT_OFF (0 << 0) +#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0) +#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0) +#define AXP288_ADC_TS_CURRENT_ON (3 << 0) static struct pmic_table power_table[] = { { @@ -212,22 +215,44 @@ out: */ static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg) { + int ret, adc_ts_pin_ctrl; u8 buf[2]; - int ret; - ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, - AXP288_ADC_TS_PIN_GPADC); + /* + * The current-source used for the battery temp-sensor (TS) is shared + * with the GPADC. For proper fuel-gauge and charger operation the TS + * current-source needs to be permanently on. But to read the GPADC we + * need to temporary switch the TS current-source to ondemand, so that + * the GPADC can use it, otherwise we will always read an all 0 value. + * + * Note that the switching from on to on-ondemand is not necessary + * when the TS current-source is off (this happens on devices which + * do not use the TS-pin). + */ + ret = regmap_read(regmap, AXP288_ADC_TS_PIN_CTRL, &adc_ts_pin_ctrl); if (ret) return ret; - /* After switching to the GPADC pin give things some time to settle */ - usleep_range(6000, 10000); + if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) { + ret = regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL, + AXP288_ADC_TS_CURRENT_ON_OFF_MASK, + AXP288_ADC_TS_CURRENT_ON_ONDEMAND); + if (ret) + return ret; + + /* Wait a bit after switching the current-source */ + usleep_range(6000, 10000); + } ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2); if (ret == 0) ret = (buf[0] << 4) + ((buf[1] >> 4) & 0x0f); - regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON); + if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) { + regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL, + AXP288_ADC_TS_CURRENT_ON_OFF_MASK, + AXP288_ADC_TS_CURRENT_ON); + } return ret; } From 8070ba6348608aa1da15eb83dbaa9ece596aaa67 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 10 Dec 2018 22:00:23 +0100 Subject: [PATCH 042/246] ARM: shmobile: fix build regressions A number of Kconfig options have become available now to random ARM platforms outside of ARCH_MULTIPLATFORM, which now causes Kconfig warnings, and other build errors when those select options that lack additional dependencies, e.g.: WARNING: unmet direct dependencies detected for HAVE_ARM_ARCH_TIMER Depends on [n]: CPU_V7 [=n] Selected by [y]: - ARCH_RCAR_GEN2 [=y] && SOC_RENESAS [=y] - ARCH_R8A73A4 [=y] && SOC_RENESAS [=y] && ARM [=y] WARNING: unmet direct dependencies detected for SYS_SUPPORTS_EM_STI Depends on [n]: GENERIC_CLOCKEVENTS [=n] Selected by [y]: - ARCH_EMEV2 [=y] && SOC_RENESAS [=y] && ARM [=y] Put the old dependency on ARCH_RENESAS back for the moment to restore the previous behavior. Fixes: 062887bf5ef7 ("ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/") Signed-off-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- drivers/soc/renesas/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig index 4d8012e1205c..68bfca6f20dd 100644 --- a/drivers/soc/renesas/Kconfig +++ b/drivers/soc/renesas/Kconfig @@ -44,7 +44,7 @@ config ARCH_RZN1 bool select ARM_AMBA -if ARM +if ARM && ARCH_RENESAS #comment "Renesas ARM SoCs System Type" From 19e16fb4f319b84b3220e98abf726218beba8c34 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 2 Jan 2019 15:36:53 +0100 Subject: [PATCH 043/246] mtd: Fix the check on nvmem_register() ret code Commit 20167b70c894 ("nvmem: use EOPNOTSUPP instead of ENOSYS") changed the nvmem_register() ret code from ENOSYS to EOPNOTSUPP when CONFIG_NVMEM is not enabled, but the check in mtd_nvmem_add() was not adjusted accordingly. Cc: Bartosz Golaszewski Cc: Alban Bedel Fixes: c4dfa25ab307 ("mtd: add support for reading MTD devices via the nvmem API") Reported-by: kernel test robot Signed-off-by: Boris Brezillon Reviewed-by: Bartosz Golaszewski Signed-off-by: Boris Brezillon --- drivers/mtd/mtdcore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 21e3cdc04036..999b705769a8 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -522,7 +522,7 @@ static int mtd_nvmem_add(struct mtd_info *mtd) mtd->nvmem = nvmem_register(&config); if (IS_ERR(mtd->nvmem)) { /* Just ignore if there is no NVMEM support in the kernel */ - if (PTR_ERR(mtd->nvmem) == -ENOSYS) { + if (PTR_ERR(mtd->nvmem) == -EOPNOTSUPP) { mtd->nvmem = NULL; } else { dev_err(&mtd->dev, "Failed to register NVMEM device\n"); From 2b6f0090a3335b7bdd03ca520c35591159463041 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Wed, 2 Jan 2019 15:36:54 +0100 Subject: [PATCH 044/246] mtd: Check add_mtd_device() ret code add_mtd_device() can fail. We should always check its return value and gracefully handle the failure case. Fix the call sites where this not done (in mtdpart.c) and add a __must_check attribute to the prototype to avoid this kind of mistakes. Signed-off-by: Boris Brezillon --- drivers/mtd/mtdcore.h | 2 +- drivers/mtd/mtdpart.c | 36 +++++++++++++++++++++++++++++++----- 2 files changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h index 9887bda317cd..b31c868019ad 100644 --- a/drivers/mtd/mtdcore.h +++ b/drivers/mtd/mtdcore.h @@ -7,7 +7,7 @@ extern struct mutex mtd_table_mutex; struct mtd_info *__mtd_next_device(int i); -int add_mtd_device(struct mtd_info *mtd); +int __must_check add_mtd_device(struct mtd_info *mtd); int del_mtd_device(struct mtd_info *mtd); int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); int del_mtd_partitions(struct mtd_info *); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index b6af41b04622..60104e1079c5 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -618,10 +618,22 @@ int mtd_add_partition(struct mtd_info *parent, const char *name, list_add(&new->list, &mtd_partitions); mutex_unlock(&mtd_partitions_mutex); - add_mtd_device(&new->mtd); + ret = add_mtd_device(&new->mtd); + if (ret) + goto err_remove_part; mtd_add_partition_attrs(new); + return 0; + +err_remove_part: + mutex_lock(&mtd_partitions_mutex); + list_del(&new->list); + mutex_unlock(&mtd_partitions_mutex); + + free_partition(new); + pr_info("%s:%i\n", __func__, __LINE__); + return ret; } EXPORT_SYMBOL_GPL(mtd_add_partition); @@ -712,22 +724,31 @@ int add_mtd_partitions(struct mtd_info *master, { struct mtd_part *slave; uint64_t cur_offset = 0; - int i; + int i, ret; printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name); for (i = 0; i < nbparts; i++) { slave = allocate_partition(master, parts + i, i, cur_offset); if (IS_ERR(slave)) { - del_mtd_partitions(master); - return PTR_ERR(slave); + ret = PTR_ERR(slave); + goto err_del_partitions; } mutex_lock(&mtd_partitions_mutex); list_add(&slave->list, &mtd_partitions); mutex_unlock(&mtd_partitions_mutex); - add_mtd_device(&slave->mtd); + ret = add_mtd_device(&slave->mtd); + if (ret) { + mutex_lock(&mtd_partitions_mutex); + list_del(&slave->list); + mutex_unlock(&mtd_partitions_mutex); + + free_partition(slave); + goto err_del_partitions; + } + mtd_add_partition_attrs(slave); /* Look for subpartitions */ parse_mtd_partitions(&slave->mtd, parts[i].types, NULL); @@ -736,6 +757,11 @@ int add_mtd_partitions(struct mtd_info *master, } return 0; + +err_del_partitions: + del_mtd_partitions(master); + + return ret; } static DEFINE_SPINLOCK(part_parser_lock); From a64597227d0de5610407fcc95dc835745a53f5d0 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Wed, 12 Dec 2018 12:17:11 +0000 Subject: [PATCH 045/246] soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B} The workaround for the wrong hierarchy of the 3DG-{A,B} power domains on RZ/G2E ES1.0 corrected the parent domains. However, the 3DG-{A,B} power domains were still initialized and powered in the wrong order, causing 3DG operation to fail. Fix this by changing the order in the table at runtime, when running on an affected SoC. This work is based on the work done by Geert for R-Car E3. Fixes: f37d211c687588328 ("soc: renesas: rcar-sysc: Add r8a774c0 support") Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- drivers/soc/renesas/r8a774c0-sysc.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c index e1ac4c0f6640..11050e17ea81 100644 --- a/drivers/soc/renesas/r8a774c0-sysc.c +++ b/drivers/soc/renesas/r8a774c0-sysc.c @@ -28,19 +28,6 @@ static struct rcar_sysc_area r8a774c0_areas[] __initdata = { { "3dg-b", 0x100, 1, R8A774C0_PD_3DG_B, R8A774C0_PD_3DG_A }, }; -static void __init rcar_sysc_fix_parent(struct rcar_sysc_area *areas, - unsigned int num_areas, u8 id, - int new_parent) -{ - unsigned int i; - - for (i = 0; i < num_areas; i++) - if (areas[i].isr_bit == id) { - areas[i].parent = new_parent; - return; - } -} - /* Fixups for RZ/G2E ES1.0 revision */ static const struct soc_device_attribute r8a774c0[] __initconst = { { .soc_id = "r8a774c0", .revision = "ES1.0" }, @@ -50,12 +37,10 @@ static const struct soc_device_attribute r8a774c0[] __initconst = { static int __init r8a774c0_sysc_init(void) { if (soc_device_match(r8a774c0)) { - rcar_sysc_fix_parent(r8a774c0_areas, - ARRAY_SIZE(r8a774c0_areas), - R8A774C0_PD_3DG_A, R8A774C0_PD_3DG_B); - rcar_sysc_fix_parent(r8a774c0_areas, - ARRAY_SIZE(r8a774c0_areas), - R8A774C0_PD_3DG_B, R8A774C0_PD_ALWAYS_ON); + /* Fix incorrect 3DG hierarchy */ + swap(r8a774c0_areas[6], r8a774c0_areas[7]); + r8a774c0_areas[6].parent = R8A774C0_PD_ALWAYS_ON; + r8a774c0_areas[7].parent = R8A774C0_PD_3DG_B; } return 0; From 8a5aaf97cc4876a9b61cb3b7c07128d4569ac536 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Fri, 4 Jan 2019 11:17:33 +0800 Subject: [PATCH 046/246] Documentation/features: Add csky kernel features core/ cBPF-JIT : TODO | core/ eBPF-JIT : TODO | core/ generic-idle-thread : ok | core/ jump-labels : TODO | core/ tracehook : ok | debug/ KASAN : TODO | debug/ gcov-profile-all : TODO | debug/ kgdb : TODO | debug/ kprobes-on-ftrace : TODO | debug/ kprobes : TODO | debug/ kretprobes : TODO | debug/ optprobes : TODO | debug/ stackprotector : TODO | debug/ uprobes : TODO | debug/ user-ret-profiler : TODO | io/ dma-contiguous : ok | locking/ cmpxchg-local : TODO | locking/ lockdep : TODO | locking/ queued-rwlocks : ok | locking/ queued-spinlocks : TODO | locking/ rwsem-optimized : TODO | perf/ kprobes-event : TODO | perf/ perf-regs : TODO | perf/ perf-stackdump : TODO | sched/ membarrier-sync-core : TODO | sched/ numa-balancing : .. | seccomp/ seccomp-filter : TODO | time/ arch-tick-broadcast : TODO | time/ clockevents : ok | time/ context-tracking : TODO | time/ irq-time-acct : TODO | time/ modern-timekeeping : ok | time/ virt-cpuacct : TODO | vm/ ELF-ASLR : TODO | vm/ PG_uncached : TODO | vm/ THP : .. | vm/ batch-unmap-tlb-flush: TODO | vm/ huge-vmap : TODO | vm/ ioremap_prot : TODO | vm/ numa-memblock : .. | vm/ pte_special : TODO | Signed-off-by: Guo Ren Cc: Arnd Bergmann --- Documentation/features/core/cBPF-JIT/arch-support.txt | 1 + Documentation/features/core/eBPF-JIT/arch-support.txt | 1 + Documentation/features/core/generic-idle-thread/arch-support.txt | 1 + Documentation/features/core/jump-labels/arch-support.txt | 1 + Documentation/features/core/tracehook/arch-support.txt | 1 + Documentation/features/debug/KASAN/arch-support.txt | 1 + Documentation/features/debug/gcov-profile-all/arch-support.txt | 1 + Documentation/features/debug/kgdb/arch-support.txt | 1 + Documentation/features/debug/kprobes-on-ftrace/arch-support.txt | 1 + Documentation/features/debug/kprobes/arch-support.txt | 1 + Documentation/features/debug/kretprobes/arch-support.txt | 1 + Documentation/features/debug/optprobes/arch-support.txt | 1 + Documentation/features/debug/stackprotector/arch-support.txt | 1 + Documentation/features/debug/uprobes/arch-support.txt | 1 + Documentation/features/debug/user-ret-profiler/arch-support.txt | 1 + Documentation/features/io/dma-contiguous/arch-support.txt | 1 + Documentation/features/locking/cmpxchg-local/arch-support.txt | 1 + Documentation/features/locking/lockdep/arch-support.txt | 1 + Documentation/features/locking/queued-rwlocks/arch-support.txt | 1 + Documentation/features/locking/queued-spinlocks/arch-support.txt | 1 + Documentation/features/locking/rwsem-optimized/arch-support.txt | 1 + Documentation/features/perf/kprobes-event/arch-support.txt | 1 + Documentation/features/perf/perf-regs/arch-support.txt | 1 + Documentation/features/perf/perf-stackdump/arch-support.txt | 1 + .../features/sched/membarrier-sync-core/arch-support.txt | 1 + Documentation/features/sched/numa-balancing/arch-support.txt | 1 + Documentation/features/seccomp/seccomp-filter/arch-support.txt | 1 + Documentation/features/time/arch-tick-broadcast/arch-support.txt | 1 + Documentation/features/time/clockevents/arch-support.txt | 1 + Documentation/features/time/context-tracking/arch-support.txt | 1 + Documentation/features/time/irq-time-acct/arch-support.txt | 1 + Documentation/features/time/modern-timekeeping/arch-support.txt | 1 + Documentation/features/time/virt-cpuacct/arch-support.txt | 1 + Documentation/features/vm/ELF-ASLR/arch-support.txt | 1 + Documentation/features/vm/PG_uncached/arch-support.txt | 1 + Documentation/features/vm/THP/arch-support.txt | 1 + Documentation/features/vm/TLB/arch-support.txt | 1 + Documentation/features/vm/huge-vmap/arch-support.txt | 1 + Documentation/features/vm/ioremap_prot/arch-support.txt | 1 + Documentation/features/vm/numa-memblock/arch-support.txt | 1 + Documentation/features/vm/pte_special/arch-support.txt | 1 + 41 files changed, 41 insertions(+) diff --git a/Documentation/features/core/cBPF-JIT/arch-support.txt b/Documentation/features/core/cBPF-JIT/arch-support.txt index 90459cdde314..8620c38d4db0 100644 --- a/Documentation/features/core/cBPF-JIT/arch-support.txt +++ b/Documentation/features/core/cBPF-JIT/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/core/eBPF-JIT/arch-support.txt b/Documentation/features/core/eBPF-JIT/arch-support.txt index c90a0382fe66..9ae6e8d0d10d 100644 --- a/Documentation/features/core/eBPF-JIT/arch-support.txt +++ b/Documentation/features/core/eBPF-JIT/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index 0ef6acdb991c..365df2c2ff0b 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | ok | | h8300: | TODO | | hexagon: | ok | | ia64: | ok | diff --git a/Documentation/features/core/jump-labels/arch-support.txt b/Documentation/features/core/jump-labels/arch-support.txt index 60111395f932..7fc2e243dee9 100644 --- a/Documentation/features/core/jump-labels/arch-support.txt +++ b/Documentation/features/core/jump-labels/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/core/tracehook/arch-support.txt b/Documentation/features/core/tracehook/arch-support.txt index f44c274e40ed..d344b99aae1e 100644 --- a/Documentation/features/core/tracehook/arch-support.txt +++ b/Documentation/features/core/tracehook/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | ok | + | csky: | ok | | h8300: | TODO | | hexagon: | ok | | ia64: | ok | diff --git a/Documentation/features/debug/KASAN/arch-support.txt b/Documentation/features/debug/KASAN/arch-support.txt index 282ecc8ea1da..304dcd461795 100644 --- a/Documentation/features/debug/KASAN/arch-support.txt +++ b/Documentation/features/debug/KASAN/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/gcov-profile-all/arch-support.txt b/Documentation/features/debug/gcov-profile-all/arch-support.txt index 01b2b3004e0a..059d58a549c7 100644 --- a/Documentation/features/debug/gcov-profile-all/arch-support.txt +++ b/Documentation/features/debug/gcov-profile-all/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/kgdb/arch-support.txt b/Documentation/features/debug/kgdb/arch-support.txt index 3b4dff22329f..3e6b8f07d5d0 100644 --- a/Documentation/features/debug/kgdb/arch-support.txt +++ b/Documentation/features/debug/kgdb/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | ok | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt index 7e963d0ae646..68f266944d5f 100644 --- a/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt +++ b/Documentation/features/debug/kprobes-on-ftrace/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/kprobes/arch-support.txt b/Documentation/features/debug/kprobes/arch-support.txt index 4ada027faf16..f4e45bd58fea 100644 --- a/Documentation/features/debug/kprobes/arch-support.txt +++ b/Documentation/features/debug/kprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/debug/kretprobes/arch-support.txt b/Documentation/features/debug/kretprobes/arch-support.txt index 044e13fcca5d..1d5651ef11f8 100644 --- a/Documentation/features/debug/kretprobes/arch-support.txt +++ b/Documentation/features/debug/kretprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/debug/optprobes/arch-support.txt b/Documentation/features/debug/optprobes/arch-support.txt index dce7669c918f..fb297a88f62c 100644 --- a/Documentation/features/debug/optprobes/arch-support.txt +++ b/Documentation/features/debug/optprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/stackprotector/arch-support.txt b/Documentation/features/debug/stackprotector/arch-support.txt index 954ac1c95553..9999ea521f3e 100644 --- a/Documentation/features/debug/stackprotector/arch-support.txt +++ b/Documentation/features/debug/stackprotector/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/uprobes/arch-support.txt b/Documentation/features/debug/uprobes/arch-support.txt index 1a3f9d3229bf..1c577d0cfc7f 100644 --- a/Documentation/features/debug/uprobes/arch-support.txt +++ b/Documentation/features/debug/uprobes/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/debug/user-ret-profiler/arch-support.txt b/Documentation/features/debug/user-ret-profiler/arch-support.txt index 1d78d1069a5f..6bfa36b0e017 100644 --- a/Documentation/features/debug/user-ret-profiler/arch-support.txt +++ b/Documentation/features/debug/user-ret-profiler/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/io/dma-contiguous/arch-support.txt b/Documentation/features/io/dma-contiguous/arch-support.txt index 30c072d2b67c..eb28b5c97ca6 100644 --- a/Documentation/features/io/dma-contiguous/arch-support.txt +++ b/Documentation/features/io/dma-contiguous/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | ok | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/cmpxchg-local/arch-support.txt b/Documentation/features/locking/cmpxchg-local/arch-support.txt index 51704a2dc8d1..242ff5a6586e 100644 --- a/Documentation/features/locking/cmpxchg-local/arch-support.txt +++ b/Documentation/features/locking/cmpxchg-local/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/lockdep/arch-support.txt b/Documentation/features/locking/lockdep/arch-support.txt index bd39c5edd460..941fd5b1094d 100644 --- a/Documentation/features/locking/lockdep/arch-support.txt +++ b/Documentation/features/locking/lockdep/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/locking/queued-rwlocks/arch-support.txt b/Documentation/features/locking/queued-rwlocks/arch-support.txt index da7aff3bee0b..c683da198f31 100644 --- a/Documentation/features/locking/queued-rwlocks/arch-support.txt +++ b/Documentation/features/locking/queued-rwlocks/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | ok | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/queued-spinlocks/arch-support.txt b/Documentation/features/locking/queued-spinlocks/arch-support.txt index 478e9101322c..e3080b82aefd 100644 --- a/Documentation/features/locking/queued-spinlocks/arch-support.txt +++ b/Documentation/features/locking/queued-spinlocks/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/locking/rwsem-optimized/arch-support.txt b/Documentation/features/locking/rwsem-optimized/arch-support.txt index e54b1f1a8091..7521d7500fbe 100644 --- a/Documentation/features/locking/rwsem-optimized/arch-support.txt +++ b/Documentation/features/locking/rwsem-optimized/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/perf/kprobes-event/arch-support.txt b/Documentation/features/perf/kprobes-event/arch-support.txt index 7331402d1887..d8278bf62b85 100644 --- a/Documentation/features/perf/kprobes-event/arch-support.txt +++ b/Documentation/features/perf/kprobes-event/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/perf/perf-regs/arch-support.txt b/Documentation/features/perf/perf-regs/arch-support.txt index 53feeee6cdad..687d049d9cee 100644 --- a/Documentation/features/perf/perf-regs/arch-support.txt +++ b/Documentation/features/perf/perf-regs/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/perf/perf-stackdump/arch-support.txt b/Documentation/features/perf/perf-stackdump/arch-support.txt index 16164348e0ea..90996e3d18a8 100644 --- a/Documentation/features/perf/perf-stackdump/arch-support.txt +++ b/Documentation/features/perf/perf-stackdump/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/sched/membarrier-sync-core/arch-support.txt b/Documentation/features/sched/membarrier-sync-core/arch-support.txt index c7858dd1ea8f..8a521a622966 100644 --- a/Documentation/features/sched/membarrier-sync-core/arch-support.txt +++ b/Documentation/features/sched/membarrier-sync-core/arch-support.txt @@ -34,6 +34,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/sched/numa-balancing/arch-support.txt b/Documentation/features/sched/numa-balancing/arch-support.txt index c68bb2c2cb62..350823692f28 100644 --- a/Documentation/features/sched/numa-balancing/arch-support.txt +++ b/Documentation/features/sched/numa-balancing/arch-support.txt @@ -11,6 +11,7 @@ | arm: | .. | | arm64: | ok | | c6x: | .. | + | csky: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | TODO | diff --git a/Documentation/features/seccomp/seccomp-filter/arch-support.txt b/Documentation/features/seccomp/seccomp-filter/arch-support.txt index d4271b493b41..4fe6c3c3be5c 100644 --- a/Documentation/features/seccomp/seccomp-filter/arch-support.txt +++ b/Documentation/features/seccomp/seccomp-filter/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/time/arch-tick-broadcast/arch-support.txt b/Documentation/features/time/arch-tick-broadcast/arch-support.txt index 83d9e68462bb..593536f7925b 100644 --- a/Documentation/features/time/arch-tick-broadcast/arch-support.txt +++ b/Documentation/features/time/arch-tick-broadcast/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/time/clockevents/arch-support.txt b/Documentation/features/time/clockevents/arch-support.txt index 3d4908fce6da..7a27157da408 100644 --- a/Documentation/features/time/clockevents/arch-support.txt +++ b/Documentation/features/time/clockevents/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | ok | + | csky: | ok | | h8300: | ok | | hexagon: | ok | | ia64: | TODO | diff --git a/Documentation/features/time/context-tracking/arch-support.txt b/Documentation/features/time/context-tracking/arch-support.txt index c29974afffaa..048bfb6d3872 100644 --- a/Documentation/features/time/context-tracking/arch-support.txt +++ b/Documentation/features/time/context-tracking/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/time/irq-time-acct/arch-support.txt b/Documentation/features/time/irq-time-acct/arch-support.txt index 8d73c463ec27..a14bbad8e948 100644 --- a/Documentation/features/time/irq-time-acct/arch-support.txt +++ b/Documentation/features/time/irq-time-acct/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | .. | diff --git a/Documentation/features/time/modern-timekeeping/arch-support.txt b/Documentation/features/time/modern-timekeeping/arch-support.txt index e7c6ea6b8fb3..2855dfe2464d 100644 --- a/Documentation/features/time/modern-timekeeping/arch-support.txt +++ b/Documentation/features/time/modern-timekeeping/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | ok | + | csky: | ok | | h8300: | ok | | hexagon: | ok | | ia64: | ok | diff --git a/Documentation/features/time/virt-cpuacct/arch-support.txt b/Documentation/features/time/virt-cpuacct/arch-support.txt index 4646457461cf..fb0d0cab9cab 100644 --- a/Documentation/features/time/virt-cpuacct/arch-support.txt +++ b/Documentation/features/time/virt-cpuacct/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/vm/ELF-ASLR/arch-support.txt b/Documentation/features/vm/ELF-ASLR/arch-support.txt index 1f71d090ff2c..adc25878d217 100644 --- a/Documentation/features/vm/ELF-ASLR/arch-support.txt +++ b/Documentation/features/vm/ELF-ASLR/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/PG_uncached/arch-support.txt b/Documentation/features/vm/PG_uncached/arch-support.txt index fbd5aa463b0a..f05588f9e4b4 100644 --- a/Documentation/features/vm/PG_uncached/arch-support.txt +++ b/Documentation/features/vm/PG_uncached/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | ok | diff --git a/Documentation/features/vm/THP/arch-support.txt b/Documentation/features/vm/THP/arch-support.txt index 5d7ecc378f29..cdfe8925f881 100644 --- a/Documentation/features/vm/THP/arch-support.txt +++ b/Documentation/features/vm/THP/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | .. | + | csky: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | TODO | diff --git a/Documentation/features/vm/TLB/arch-support.txt b/Documentation/features/vm/TLB/arch-support.txt index f7af9678eb66..2bdd3b6cee3c 100644 --- a/Documentation/features/vm/TLB/arch-support.txt +++ b/Documentation/features/vm/TLB/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | .. | + | csky: | TODO | | h8300: | .. | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt index d0713ccc7117..019131c5acce 100644 --- a/Documentation/features/vm/huge-vmap/arch-support.txt +++ b/Documentation/features/vm/huge-vmap/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/ioremap_prot/arch-support.txt b/Documentation/features/vm/ioremap_prot/arch-support.txt index 326e4797bc65..3a6b87de6a19 100644 --- a/Documentation/features/vm/ioremap_prot/arch-support.txt +++ b/Documentation/features/vm/ioremap_prot/arch-support.txt @@ -11,6 +11,7 @@ | arm: | TODO | | arm64: | TODO | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | diff --git a/Documentation/features/vm/numa-memblock/arch-support.txt b/Documentation/features/vm/numa-memblock/arch-support.txt index 1a988052cd24..3004beb0fd71 100644 --- a/Documentation/features/vm/numa-memblock/arch-support.txt +++ b/Documentation/features/vm/numa-memblock/arch-support.txt @@ -11,6 +11,7 @@ | arm: | .. | | arm64: | ok | | c6x: | .. | + | csky: | .. | | h8300: | .. | | hexagon: | .. | | ia64: | ok | diff --git a/Documentation/features/vm/pte_special/arch-support.txt b/Documentation/features/vm/pte_special/arch-support.txt index a8378424bc98..2dc5df6a1cf5 100644 --- a/Documentation/features/vm/pte_special/arch-support.txt +++ b/Documentation/features/vm/pte_special/arch-support.txt @@ -11,6 +11,7 @@ | arm: | ok | | arm64: | ok | | c6x: | TODO | + | csky: | TODO | | h8300: | TODO | | hexagon: | TODO | | ia64: | TODO | From 84cad97a717f5749a0236abd5ce68da582ea074f Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 2 Jan 2019 20:12:46 -0600 Subject: [PATCH 047/246] staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption Commit 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt") causes scheduling while atomic bugs followed by a hard freeze whenever the driver tries to connect to a CCMP-encrypted network. Experimentation showed that the freezes were eliminated when module lib80211 was preloaded, which can be forced by calling lib80211_get_crypto_ops() directly rather than indirectly through try_then_request_module(). With this change, no BUG messages are logged. Fixes: 6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt") Cc: Stable # v4.17+ Reported-and-tested-by: Michael Straube Cc: Ivan Safonov Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/core/rtw_security.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8188eu/core/rtw_security.c b/drivers/staging/rtl8188eu/core/rtw_security.c index 364d6ea14bf8..dbb84e00077f 100644 --- a/drivers/staging/rtl8188eu/core/rtw_security.c +++ b/drivers/staging/rtl8188eu/core/rtw_security.c @@ -1291,7 +1291,7 @@ u32 rtw_aes_decrypt(struct adapter *padapter, u8 *precvframe) struct sk_buff *skb = ((struct recv_frame *)precvframe)->pkt; void *crypto_private = NULL; u8 *key, *pframe = skb->data; - struct lib80211_crypto_ops *crypto_ops = try_then_request_module(lib80211_get_crypto_ops("CCMP"), "lib80211_crypt_ccmp"); + struct lib80211_crypto_ops *crypto_ops = lib80211_get_crypto_ops("CCMP"); struct security_priv *psecuritypriv = &padapter->securitypriv; char iv[8], icv[8]; From 7775665aadc48a562051834a73519129bf717d73 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 2 Jan 2019 20:12:47 -0600 Subject: [PATCH 048/246] staging: rtl8188eu: Fix module loading from tasklet for WEP encryption Commit 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames") causes scheduling while atomic bugs followed by a hard freeze whenever the driver tries to connect to a WEP-encrypted network. Experimentation showed that the freezes were eliminated when module lib80211 was preloaded, which can be forced by calling lib80211_get_crypto_ops() directly rather than indirectly through try_then_request_module(). With this change, no BUG messages are logged. Fixes: 2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames") Cc: Stable # v4.17+ Cc: Michael Straube Cc: Ivan Safonov Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/core/rtw_security.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/rtl8188eu/core/rtw_security.c b/drivers/staging/rtl8188eu/core/rtw_security.c index dbb84e00077f..2f90f60f1681 100644 --- a/drivers/staging/rtl8188eu/core/rtw_security.c +++ b/drivers/staging/rtl8188eu/core/rtw_security.c @@ -154,7 +154,7 @@ void rtw_wep_encrypt(struct adapter *padapter, u8 *pxmitframe) pframe = ((struct xmit_frame *)pxmitframe)->buf_addr + hw_hdr_offset; - crypto_ops = try_then_request_module(lib80211_get_crypto_ops("WEP"), "lib80211_crypt_wep"); + crypto_ops = lib80211_get_crypto_ops("WEP"); if (!crypto_ops) return; @@ -210,7 +210,7 @@ int rtw_wep_decrypt(struct adapter *padapter, u8 *precvframe) void *crypto_private = NULL; int status = _SUCCESS; const int keyindex = prxattrib->key_index; - struct lib80211_crypto_ops *crypto_ops = try_then_request_module(lib80211_get_crypto_ops("WEP"), "lib80211_crypt_wep"); + struct lib80211_crypto_ops *crypto_ops = lib80211_get_crypto_ops("WEP"); char iv[4], icv[4]; if (!crypto_ops) { From 42f03ab3c75197e8fec2dbd6b50bc699619aab9b Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 17 Oct 2018 17:05:52 +0300 Subject: [PATCH 049/246] ARC: HSDK: improve reset driver As for today HSDK reset driver implements only .reset() callback. In case of driver which implements one of standard reset controller usage pattern (call *_deassert() in probe(), call *_assert() in remove()) that leads to inoperability of this reset driver. Improve HSDK reset driver by calling .reset() callback inside of .deassert() callback to avoid each reset controller user adaptation for work with both reset methods (reset() and {.assert() & .deassert()} pair) Signed-off-by: Eugeniy Paltsev Signed-off-by: Philipp Zabel --- drivers/reset/reset-hsdk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/reset/reset-hsdk.c b/drivers/reset/reset-hsdk.c index 8bce391c6943..4c7b8647b49c 100644 --- a/drivers/reset/reset-hsdk.c +++ b/drivers/reset/reset-hsdk.c @@ -86,6 +86,7 @@ static int hsdk_reset_reset(struct reset_controller_dev *rcdev, static const struct reset_control_ops hsdk_reset_ops = { .reset = hsdk_reset_reset, + .deassert = hsdk_reset_reset, }; static int hsdk_reset_probe(struct platform_device *pdev) From 12c62b9d6ce57d37f3c03cc902c30498909fbc42 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 8 Oct 2018 13:15:43 +0200 Subject: [PATCH 050/246] reset: Improve reset controller kernel docs Grammar and indentation fixes. Signed-off-by: Geert Uytterhoeven [p.zabel@pengutronix.de: dropped "shared among" -> "shared between"] Signed-off-by: Philipp Zabel --- include/linux/reset.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/reset.h b/include/linux/reset.h index 29af6d6b2f4b..76690cf2e3e0 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -138,7 +138,7 @@ __must_check reset_control_get_exclusive(struct device *dev, const char *id) * * Returns a struct reset_control or IS_ERR() condition containing errno. * This function is intended for use with reset-controls which are shared - * between hardware-blocks. + * between hardware blocks. * * When a reset-control is shared, the behavior of reset_control_assert / * deassert is changed, the reset-core will keep track of a deassert_count @@ -187,7 +187,7 @@ static inline struct reset_control *of_reset_control_get_exclusive( } /** - * of_reset_control_get_shared - Lookup and obtain an shared reference + * of_reset_control_get_shared - Lookup and obtain a shared reference * to a reset controller. * @node: device to be reset by the controller * @id: reset line name @@ -229,7 +229,7 @@ static inline struct reset_control *of_reset_control_get_exclusive_by_index( } /** - * of_reset_control_get_shared_by_index - Lookup and obtain an shared + * of_reset_control_get_shared_by_index - Lookup and obtain a shared * reference to a reset controller * by index. * @node: device to be reset by the controller @@ -322,7 +322,7 @@ devm_reset_control_get_exclusive_by_index(struct device *dev, int index) /** * devm_reset_control_get_shared_by_index - resource managed - * reset_control_get_shared + * reset_control_get_shared * @dev: device to be reset by the controller * @index: index of the reset controller * From eaf91db0ab22dc2c664a9782f2f31dcbc410f3b5 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 13 Nov 2018 13:47:44 +0100 Subject: [PATCH 051/246] reset: Add reset_control_get_count() Currently the reset core has internal support for counting the number of resets for a device described in DT. Generalize this to devices using lookup resets, and export it for public use. This will be used by generic drivers that need to be sure a device is controlled by a single, dedicated reset line (e.g. vfio-platform). Signed-off-by: Geert Uytterhoeven [p.zabel@pengutronix.de: fixed a typo in reset_control_get_count comment] Signed-off-by: Philipp Zabel --- drivers/reset/core.c | 41 +++++++++++++++++++++++++++++++++++++++++ include/linux/reset.h | 7 +++++++ 2 files changed, 48 insertions(+) diff --git a/drivers/reset/core.c b/drivers/reset/core.c index d1887c0ed5d3..bce2d6aefef9 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -795,3 +795,44 @@ devm_reset_control_array_get(struct device *dev, bool shared, bool optional) return rstc; } EXPORT_SYMBOL_GPL(devm_reset_control_array_get); + +static int reset_control_get_count_from_lookup(struct device *dev) +{ + const struct reset_control_lookup *lookup; + const char *dev_id = dev_name(dev); + int count = 0; + + if (!dev) + return -EINVAL; + + mutex_lock(&reset_lookup_mutex); + + list_for_each_entry(lookup, &reset_lookup_list, list) { + if (!strcmp(lookup->dev_id, dev_id)) + count++; + } + + mutex_unlock(&reset_lookup_mutex); + + if (count == 0) + count = -ENOENT; + + return count; +} + +/** + * reset_control_get_count - Count number of resets available with a device + * + * @dev: device for which to return the number of resets + * + * Returns positive reset count on success, or error number on failure and + * on count being zero. + */ +int reset_control_get_count(struct device *dev) +{ + if (dev->of_node) + return of_reset_control_get_count(dev->of_node); + + return reset_control_get_count_from_lookup(dev); +} +EXPORT_SYMBOL_GPL(reset_control_get_count); diff --git a/include/linux/reset.h b/include/linux/reset.h index 76690cf2e3e0..c1901b61ca30 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -32,6 +32,8 @@ struct reset_control *devm_reset_control_array_get(struct device *dev, struct reset_control *of_reset_control_array_get(struct device_node *np, bool shared, bool optional); +int reset_control_get_count(struct device *dev); + #else static inline int reset_control_reset(struct reset_control *rstc) @@ -97,6 +99,11 @@ of_reset_control_array_get(struct device_node *np, bool shared, bool optional) return optional ? NULL : ERR_PTR(-ENOTSUPP); } +static inline int reset_control_get_count(struct device *dev) +{ + return -ENOENT; +} + #endif /* CONFIG_RESET_CONTROLLER */ static inline int __must_check device_reset(struct device *dev) From 151f72f493f2605ebbed0198362eed05918ed839 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 14 Nov 2018 21:49:35 +0000 Subject: [PATCH 052/246] reset: fix null pointer dereference on dev by dev_name The call to dev_name will dereference dev, however, dev is later being null checked, so there is a possibility of a null pointer dereference on dev by the call to dev_name. Fix this by null checking dev first before the call to dev_name Detected by CoverityScan, CID#1475475 ("Dereference before null check") Fixes: 2a6cb2b1d83b ("reset: Add reset_control_get_count()") Signed-off-by: Colin Ian King Signed-off-by: Philipp Zabel --- drivers/reset/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/reset/core.c b/drivers/reset/core.c index bce2d6aefef9..9582efb70025 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -799,12 +799,13 @@ EXPORT_SYMBOL_GPL(devm_reset_control_array_get); static int reset_control_get_count_from_lookup(struct device *dev) { const struct reset_control_lookup *lookup; - const char *dev_id = dev_name(dev); + const char *dev_id; int count = 0; if (!dev) return -EINVAL; + dev_id = dev_name(dev); mutex_lock(&reset_lookup_mutex); list_for_each_entry(lookup, &reset_lookup_list, list) { From b3ca9888f35fa6919569cf27c929dc0ac49e9716 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 13 Nov 2018 12:50:48 -0600 Subject: [PATCH 053/246] reset: socfpga: add an early reset driver for SoCFPGA Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel --- arch/arm/mach-socfpga/socfpga.c | 4 ++ drivers/reset/Kconfig | 10 +++- drivers/reset/Makefile | 1 + drivers/reset/reset-simple.c | 13 ++--- drivers/reset/reset-socfpga.c | 88 +++++++++++++++++++++++++++++++++ 5 files changed, 105 insertions(+), 11 deletions(-) create mode 100644 drivers/reset/reset-socfpga.c diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index 5fb6f79059a8..afd98971d903 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -32,6 +32,8 @@ void __iomem *rst_manager_base_addr; void __iomem *sdr_ctl_base_addr; unsigned long socfpga_cpu1start_addr; +extern void __init socfpga_reset_init(void); + static void __init socfpga_sysmgr_init(void) { struct device_node *np; @@ -64,6 +66,7 @@ static void __init socfpga_init_irq(void) if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) socfpga_init_ocram_ecc(); + socfpga_reset_init(); } static void __init socfpga_arria10_init_irq(void) @@ -74,6 +77,7 @@ static void __init socfpga_arria10_init_irq(void) socfpga_init_arria10_l2_ecc(); if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM)) socfpga_init_arria10_ocram_ecc(); + socfpga_reset_init(); } static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index c21da9fe51ec..7ee64988faac 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -109,7 +109,7 @@ config RESET_QCOM_PDC config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST - default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED + default ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARCH_ASPEED help This enables a simple reset controller driver for reset lines that that can be asserted and deasserted by toggling bits in a contiguous, @@ -128,6 +128,14 @@ config RESET_STM32MP157 help This enables the RCC reset controller driver for STM32 MPUs. +config RESET_SOCFPGA + bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA + default ARCH_SOCFPGA + select RESET_SIMPLE + help + This enables the reset driver for the SoCFPGA ARMv7 platforms. This + driver gets initialized early during platform init calls. + config RESET_SUNXI bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI default ARCH_SUNXI diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index d08e8b90046a..b14de32eb610 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o +obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index a91107fc9e27..77fbba3100c8 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -109,7 +109,7 @@ struct reset_simple_devdata { #define SOCFPGA_NR_BANKS 8 static const struct reset_simple_devdata reset_simple_socfpga = { - .reg_offset = 0x10, + .reg_offset = 0x20, .nr_resets = SOCFPGA_NR_BANKS * 32, .status_active_low = true, }; @@ -120,7 +120,8 @@ static const struct reset_simple_devdata reset_simple_active_low = { }; static const struct of_device_id reset_simple_dt_ids[] = { - { .compatible = "altr,rst-mgr", .data = &reset_simple_socfpga }, + { .compatible = "altr,stratix10-rst-mgr", + .data = &reset_simple_socfpga }, { .compatible = "st,stm32-rcc", }, { .compatible = "allwinner,sun6i-a31-clock-reset", .data = &reset_simple_active_low }, @@ -166,14 +167,6 @@ static int reset_simple_probe(struct platform_device *pdev) data->status_active_low = devdata->status_active_low; } - if (of_device_is_compatible(dev->of_node, "altr,rst-mgr") && - of_property_read_u32(dev->of_node, "altr,modrst-offset", - ®_offset)) { - dev_warn(dev, - "missing altr,modrst-offset property, assuming 0x%x!\n", - reg_offset); - } - data->membase += reg_offset; return devm_reset_controller_register(dev, &data->rcdev); diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c new file mode 100644 index 000000000000..318cfc51c441 --- /dev/null +++ b/drivers/reset/reset-socfpga.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018, Intel Corporation + * Copied from reset-sunxi.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "reset-simple.h" + +#define SOCFPGA_NR_BANKS 8 +void __init socfpga_reset_init(void); + +static int a10_reset_init(struct device_node *np) +{ + struct reset_simple_data *data; + struct resource res; + resource_size_t size; + int ret; + u32 reg_offset = 0x10; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = of_address_to_resource(np, 0, &res); + if (ret) + goto err_alloc; + + size = resource_size(&res); + if (!request_mem_region(res.start, size, np->name)) { + ret = -EBUSY; + goto err_alloc; + } + + data->membase = ioremap(res.start, size); + if (!data->membase) { + ret = -ENOMEM; + goto err_alloc; + } + + if (of_property_read_u32(np, "altr,modrst-offset", ®_offset)) + pr_warn("missing altr,modrst-offset property, assuming 0x10\n"); + data->membase += reg_offset; + + spin_lock_init(&data->lock); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = SOCFPGA_NR_BANKS * 32; + data->rcdev.ops = &reset_simple_ops; + data->rcdev.of_node = np; + data->status_active_low = true; + + return reset_controller_register(&data->rcdev); + +err_alloc: + kfree(data); + return ret; +}; + +/* + * These are the reset controller we need to initialize early on in + * our system, before we can even think of using a regular device + * driver for it. + * The controllers that we can register through the regular device + * model are handled by the simple reset driver directly. + */ +static const struct of_device_id socfpga_early_reset_dt_ids[] __initconst = { + { .compatible = "altr,rst-mgr", }, + { /* sentinel */ }, +}; + +void __init socfpga_reset_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, socfpga_early_reset_dt_ids) + a10_reset_init(np); +} From a277105b239bdcb6490ec51366413643dbc8ed4a Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Mon, 5 Nov 2018 14:05:49 -0600 Subject: [PATCH 054/246] ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding "altr,stratix10-rst-mgr" is used for the Stratix10 reset manager. Signed-off-by: Dinh Nguyen Signed-off-by: Philipp Zabel --- Documentation/devicetree/bindings/reset/socfpga-reset.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 98c9f560e5c5..38fe34fd8b8a 100644 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -1,7 +1,8 @@ Altera SOCFPGA Reset Manager Required properties: -- compatible : "altr,rst-mgr" +- compatible : "altr,rst-mgr" for (Cyclone5/Arria5/Arria10) + "altr,stratix10-rst-mgr","altr,rst-mgr" for Stratix10 ARM64 SoC - reg : Should contain 1 register ranges(address and length) - altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 From 21b22136b4330abd1467e59fbe651ae4d18f0357 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 9 Nov 2018 10:42:04 +0900 Subject: [PATCH 055/246] dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals Replace the expression of "USB3 glue layer" with the glue layer of the generic peripherals to allow other devices to use it. The reset control belongs to this glue layer. Signed-off-by: Kunihiko Hayashi Reviewed-by: Rob Herring Signed-off-by: Philipp Zabel --- .../bindings/reset/uniphier-reset.txt | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 101743dda223..f63c511a9de8 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -120,27 +120,27 @@ Example: }; -USB3 core reset ---------------- +Peripheral core reset in glue layer +----------------------------------- -USB3 core reset belongs to USB3 glue layer. Before using the core reset, -it is necessary to control the clocks and resets to enable this layer. -These clocks and resets should be described in each property. +Some peripheral core reset belongs to its own glue layer. Before using +this core reset, it is necessary to control the clocks and resets to enable +this layer. These clocks and resets should be described in each property. Required properties: - compatible: Should be - "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC - "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC - "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC - "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC USB3 + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. -- clocks: A list of phandles to the clock gate for USB3 glue layer. +- clocks: A list of phandles to the clock gate for the glue layer. According to the clock-names, appropriate clocks are required. - clock-names: Should contain "gio", "link" - for Pro4 SoC "link" - for others -- resets: A list of phandles to the reset control for USB3 glue layer. +- resets: A list of phandles to the reset control for the glue layer. According to the reset-names, appropriate resets are required. - reset-names: Should contain "gio", "link" - for Pro4 SoC From 3eb8f765f5aeca6e4195246f41e534025f69eee8 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 9 Nov 2018 10:42:05 +0900 Subject: [PATCH 056/246] reset: uniphier-usb3: Rename to reset-uniphier-glue This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 10 ++--- drivers/reset/Makefile | 2 +- ...-uniphier-usb3.c => reset-uniphier-glue.c} | 38 +++++++++---------- 3 files changed, 25 insertions(+), 25 deletions(-) rename drivers/reset/{reset-uniphier-usb3.c => reset-uniphier-glue.c} (78%) diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 7ee64988faac..2e01bd833ffd 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -171,15 +171,15 @@ config RESET_UNIPHIER Say Y if you want to control reset signals provided by System Control block, Media I/O block, Peripheral Block. -config RESET_UNIPHIER_USB3 - tristate "USB3 reset driver for UniPhier SoCs" +config RESET_UNIPHIER_GLUE + tristate "Reset driver in glue layer for UniPhier SoCs" depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF default ARCH_UNIPHIER select RESET_SIMPLE help - Support for the USB3 core reset on UniPhier SoCs. - Say Y if you want to control reset signals provided by - USB3 glue layer. + Support for peripheral core reset included in its own glue layer + on UniPhier SoCs. Say Y if you want to control reset signals + provided by the glue layer. config RESET_ZYNQ bool "ZYNQ Reset Driver" if COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index b14de32eb610..dc7874df78d9 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -24,6 +24,6 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o -obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o +obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o diff --git a/drivers/reset/reset-uniphier-usb3.c b/drivers/reset/reset-uniphier-glue.c similarity index 78% rename from drivers/reset/reset-uniphier-usb3.c rename to drivers/reset/reset-uniphier-glue.c index ffa1b19b594d..1b8ea03be9a0 100644 --- a/drivers/reset/reset-uniphier-usb3.c +++ b/drivers/reset/reset-uniphier-glue.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 // -// reset-uniphier-usb3.c - USB3 reset driver for UniPhier +// reset-uniphier-glue.c - Glue layer reset driver for UniPhier // Copyright 2018 Socionext Inc. // Author: Kunihiko Hayashi @@ -15,24 +15,24 @@ #define MAX_CLKS 2 #define MAX_RSTS 2 -struct uniphier_usb3_reset_soc_data { +struct uniphier_glue_reset_soc_data { int nclks; const char * const *clock_names; int nrsts; const char * const *reset_names; }; -struct uniphier_usb3_reset_priv { +struct uniphier_glue_reset_priv { struct clk_bulk_data clk[MAX_CLKS]; struct reset_control *rst[MAX_RSTS]; struct reset_simple_data rdata; - const struct uniphier_usb3_reset_soc_data *data; + const struct uniphier_glue_reset_soc_data *data; }; -static int uniphier_usb3_reset_probe(struct platform_device *pdev) +static int uniphier_glue_reset_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct uniphier_usb3_reset_priv *priv; + struct uniphier_glue_reset_priv *priv; struct resource *res; resource_size_t size; const char *name; @@ -100,9 +100,9 @@ out_rst_assert: return ret; } -static int uniphier_usb3_reset_remove(struct platform_device *pdev) +static int uniphier_glue_reset_remove(struct platform_device *pdev) { - struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev); + struct uniphier_glue_reset_priv *priv = platform_get_drvdata(pdev); int i; for (i = 0; i < priv->data->nrsts; i++) @@ -117,7 +117,7 @@ static const char * const uniphier_pro4_clock_reset_names[] = { "gio", "link", }; -static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = { +static const struct uniphier_glue_reset_soc_data uniphier_pro4_data = { .nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names), .clock_names = uniphier_pro4_clock_reset_names, .nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names), @@ -128,14 +128,14 @@ static const char * const uniphier_pxs2_clock_reset_names[] = { "link", }; -static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = { +static const struct uniphier_glue_reset_soc_data uniphier_pxs2_data = { .nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), .clock_names = uniphier_pxs2_clock_reset_names, .nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names), .reset_names = uniphier_pxs2_clock_reset_names, }; -static const struct of_device_id uniphier_usb3_reset_match[] = { +static const struct of_device_id uniphier_glue_reset_match[] = { { .compatible = "socionext,uniphier-pro4-usb3-reset", .data = &uniphier_pro4_data, @@ -154,18 +154,18 @@ static const struct of_device_id uniphier_usb3_reset_match[] = { }, { /* Sentinel */ } }; -MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match); +MODULE_DEVICE_TABLE(of, uniphier_glue_reset_match); -static struct platform_driver uniphier_usb3_reset_driver = { - .probe = uniphier_usb3_reset_probe, - .remove = uniphier_usb3_reset_remove, +static struct platform_driver uniphier_glue_reset_driver = { + .probe = uniphier_glue_reset_probe, + .remove = uniphier_glue_reset_remove, .driver = { - .name = "uniphier-usb3-reset", - .of_match_table = uniphier_usb3_reset_match, + .name = "uniphier-glue-reset", + .of_match_table = uniphier_glue_reset_match, }, }; -module_platform_driver(uniphier_usb3_reset_driver); +module_platform_driver(uniphier_glue_reset_driver); MODULE_AUTHOR("Kunihiko Hayashi "); -MODULE_DESCRIPTION("UniPhier USB3 Reset Driver"); +MODULE_DESCRIPTION("UniPhier Glue layer reset driver"); MODULE_LICENSE("GPL"); From 69af3d1b8a91cf9b426c4238964df847036bf214 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 9 Nov 2018 10:42:06 +0900 Subject: [PATCH 057/246] dt-bindings: reset: uniphier: Add AHCI core reset description Add compatible strings for reset control of AHCI core implemented in UniPhier SoCs. The reset control belongs to AHCI glue layer. Signed-off-by: Kunihiko Hayashi Reviewed-by: Rob Herring Signed-off-by: Philipp Zabel --- Documentation/devicetree/bindings/reset/uniphier-reset.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index f63c511a9de8..ea005177d20a 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -133,6 +133,9 @@ Required properties: "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC USB3 "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC USB3 "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC USB3 + "socionext,uniphier-pro4-ahci-reset" - for Pro4 SoC AHCI + "socionext,uniphier-pxs2-ahci-reset" - for PXs2 SoC AHCI + "socionext,uniphier-pxs3-ahci-reset" - for PXs3 SoC AHCI - #reset-cells: Should be 1. - reg: Specifies offset and length of the register set for the device. - clocks: A list of phandles to the clock gate for the glue layer. From d0c2d2101b4c1a41e6ebeca6a28c70df43d2a6a3 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Fri, 9 Nov 2018 10:42:07 +0900 Subject: [PATCH 058/246] reset: uniphier-glue: Add AHCI reset control support in glue layer Add a reset line included in AHCI glue layer to enable AHCI core implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi Signed-off-by: Philipp Zabel --- drivers/reset/reset-uniphier-glue.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/reset/reset-uniphier-glue.c b/drivers/reset/reset-uniphier-glue.c index 1b8ea03be9a0..a45923f4df6d 100644 --- a/drivers/reset/reset-uniphier-glue.c +++ b/drivers/reset/reset-uniphier-glue.c @@ -152,6 +152,18 @@ static const struct of_device_id uniphier_glue_reset_match[] = { .compatible = "socionext,uniphier-pxs3-usb3-reset", .data = &uniphier_pxs2_data, }, + { + .compatible = "socionext,uniphier-pro4-ahci-reset", + .data = &uniphier_pro4_data, + }, + { + .compatible = "socionext,uniphier-pxs2-ahci-reset", + .data = &uniphier_pxs2_data, + }, + { + .compatible = "socionext,uniphier-pxs3-ahci-reset", + .data = &uniphier_pxs2_data, + }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, uniphier_glue_reset_match); From 22e6a2e14cb8ebcae059488cf24e778e4058c2bf Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Wed, 19 Dec 2018 18:06:57 +0530 Subject: [PATCH 059/246] RISC-V: Make BSS section as the last section in vmlinux.lds.S The objcopy only emits loadable sections when creating flat kernel Image. To have minimal possible size of flat kernel Image, we should have all non-loadable sections after loadable sections. Currently, execption table section (loadable section) is after BSS section (non-loadable section) in the RISC-V vmlinux.lds.S. This is not optimal for having minimal flat kernel Image size hence this patch makes BSS section as the last section in RISC-V vmlinux.lds.S. In addition, we make BSS section aligned to 16byte instead of PAGE aligned which further reduces flat kernel Image size by few KBs. The flat kernel Image size of Linux-4.20-rc4 using GCC 8.2.0 is 8819980 bytes with current RISC-V vmlinux.lds.S and it reduces to 7991740 bytes with this patch applied. In summary, this patch reduces Linux-4.20-rc4 flat kernel Image size by 809 KB. Signed-off-by: Anup Patel Reviewed-by: Bin Meng Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/vmlinux.lds.S | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S index 65df1dfdc303..1e1395d63dab 100644 --- a/arch/riscv/kernel/vmlinux.lds.S +++ b/arch/riscv/kernel/vmlinux.lds.S @@ -18,6 +18,8 @@ #include #include +#define MAX_BYTES_PER_LONG 0x10 + OUTPUT_ARCH(riscv) ENTRY(_start) @@ -74,8 +76,6 @@ SECTIONS *(.sbss*) } - BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0) - EXCEPTION_TABLE(0x10) NOTES @@ -83,6 +83,10 @@ SECTIONS *(.rel.dyn*) } + BSS_SECTION(MAX_BYTES_PER_LONG, + MAX_BYTES_PER_LONG, + MAX_BYTES_PER_LONG) + _end = .; STABS_DEBUG From d0df00e30e4bf9bc27ddbd092ad683ff6121b360 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Tue, 25 Dec 2018 15:46:24 +0100 Subject: [PATCH 060/246] tools uapi: fix RISC-V 64-bit support The BPF library is not built on 64-bit RISC-V, as the BPF feature is not detected. Looking more in details, feature/test-bpf.c fails to build with the following error: | In file included from /tmp/linux-4.19.12/tools/include/uapi/asm/bitsperlong.h:17, | from /tmp/linux-4.19.12/tools/include/uapi/asm-generic/unistd.h:2, | from /usr/include/riscv64-linux-gnu/asm/unistd.h:1, | from test-bpf.c:2: | /tmp/linux-4.19.12/tools/include/asm-generic/bitsperlong.h:14:2: error: #error Inconsistent word size. Check asm/bitsperlong.h | #error Inconsistent word size. Check asm/bitsperlong.h | ^~~~~ The UAPI from the tools directory is missing RISC-V support, therefore bitsperlong.h from asm-generic is used, defaulting to 32 bits. Fix that by adding tools/arch/riscv/include/uapi/asm/bitsperlong.h as a copy of arch/riscv/include/uapi/asm/bitsperlong.h and by updating tools/include/uapi/asm/bitsperlong.h. Signed-off-by: Aurelien Jarno Signed-off-by: Palmer Dabbelt --- .../arch/riscv/include/uapi/asm/bitsperlong.h | 25 +++++++++++++++++++ tools/include/uapi/asm/bitsperlong.h | 2 ++ 2 files changed, 27 insertions(+) create mode 100644 tools/arch/riscv/include/uapi/asm/bitsperlong.h diff --git a/tools/arch/riscv/include/uapi/asm/bitsperlong.h b/tools/arch/riscv/include/uapi/asm/bitsperlong.h new file mode 100644 index 000000000000..0b3cb52fd29d --- /dev/null +++ b/tools/arch/riscv/include/uapi/asm/bitsperlong.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2012 ARM Ltd. + * Copyright (C) 2015 Regents of the University of California + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef _UAPI_ASM_RISCV_BITSPERLONG_H +#define _UAPI_ASM_RISCV_BITSPERLONG_H + +#define __BITS_PER_LONG (__SIZEOF_POINTER__ * 8) + +#include + +#endif /* _UAPI_ASM_RISCV_BITSPERLONG_H */ diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h index 8dd6aefdafa4..fd92ce8388fc 100644 --- a/tools/include/uapi/asm/bitsperlong.h +++ b/tools/include/uapi/asm/bitsperlong.h @@ -13,6 +13,8 @@ #include "../../arch/mips/include/uapi/asm/bitsperlong.h" #elif defined(__ia64__) #include "../../arch/ia64/include/uapi/asm/bitsperlong.h" +#elif defined(__riscv) +#include "../../arch/riscv/include/uapi/asm/bitsperlong.h" #else #include #endif From 8fd6e05c7463b635e51ec7df0a1858c1b5a6e350 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 17 Dec 2018 19:15:12 -0800 Subject: [PATCH 061/246] arch: riscv: support kernel command line forcing when no DTB passed CONFIG_CMDLINE_FORCE doesn't work on RISC-V when no DTB is passed into the kernel. This is because the code that forces the kernel command line only runs if a valid DTB is present at boot. During debugging, it's useful to have the ability to force kernel command lines even when no DTB is present. This patch adds support for doing so. Cc: Palmer Dabbelt Cc: Albert Ou Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Paul Walmsley Signed-off-by: Paul Walmsley Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/setup.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c index fc8006a042eb..6e079e94b638 100644 --- a/arch/riscv/kernel/setup.c +++ b/arch/riscv/kernel/setup.c @@ -149,7 +149,14 @@ asmlinkage void __init setup_vm(void) void __init parse_dtb(unsigned int hartid, void *dtb) { - early_init_dt_scan(__va(dtb)); + if (!early_init_dt_scan(__va(dtb))) + return; + + pr_err("No DTB passed to the kernel\n"); +#ifdef CONFIG_CMDLINE_FORCE + strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + pr_info("Forcing kernel command line to: %s\n", boot_command_line); +#endif } static void __init setup_bootmem(void) From 37a107ff6dcd773da4dc75b62b9bf4349dd7300f Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 11 Dec 2018 11:20:40 +0100 Subject: [PATCH 062/246] riscv: don't stop itself in smp_send_stop Add IPI_CPU_STOP message and use it in smp_send_stop to stop other cpus, but not itself. Mark cpu offline on reception of IPI_CPU_STOP. Signed-off-by: Andreas Schwab Reviewed-by: Atish Patra Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/smp.c | 43 ++++++++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 7 deletions(-) diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c index 57b1383e5ef7..246635eac7bb 100644 --- a/arch/riscv/kernel/smp.c +++ b/arch/riscv/kernel/smp.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,7 @@ enum ipi_message_type { IPI_RESCHEDULE, IPI_CALL_FUNC, + IPI_CPU_STOP, IPI_MAX }; @@ -66,6 +68,13 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; } +static void ipi_stop(void) +{ + set_cpu_online(smp_processor_id(), false); + while (1) + wait_for_interrupt(); +} + void riscv_software_interrupt(void) { unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits; @@ -94,6 +103,11 @@ void riscv_software_interrupt(void) generic_smp_call_function_interrupt(); } + if (ops & (1 << IPI_CPU_STOP)) { + stats[IPI_CPU_STOP]++; + ipi_stop(); + } + BUG_ON((ops >> IPI_MAX) != 0); /* Order data access and bit testing. */ @@ -121,6 +135,7 @@ send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation) static const char * const ipi_names[] = { [IPI_RESCHEDULE] = "Rescheduling interrupts", [IPI_CALL_FUNC] = "Function call interrupts", + [IPI_CPU_STOP] = "CPU stop interrupts", }; void show_ipi_stats(struct seq_file *p, int prec) @@ -146,15 +161,29 @@ void arch_send_call_function_single_ipi(int cpu) send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC); } -static void ipi_stop(void *unused) -{ - while (1) - wait_for_interrupt(); -} - void smp_send_stop(void) { - on_each_cpu(ipi_stop, NULL, 1); + unsigned long timeout; + + if (num_online_cpus() > 1) { + cpumask_t mask; + + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + + if (system_state <= SYSTEM_RUNNING) + pr_crit("SMP: stopping secondary CPUs\n"); + send_ipi_message(&mask, IPI_CPU_STOP); + } + + /* Wait up to one second for other CPUs to stop */ + timeout = USEC_PER_SEC; + while (num_online_cpus() > 1 && timeout--) + udelay(1); + + if (num_online_cpus() > 1) + pr_warn("SMP: failed to stop secondary CPUs %*pbl\n", + cpumask_pr_args(cpu_online_mask)); } void smp_send_reschedule(int cpu) From af5f462c2d9ed227ffca4c8d02eb38679c9b8846 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 17 Dec 2018 16:09:58 -0800 Subject: [PATCH 063/246] MAINTAINERS: SiFive drivers: change the git tree to a SiFive git tree Update the git tree URL for drivers for SiFive-related IP blocks to point to a SiFive-managed URL. Cc: Albert Ou Cc: Palmer Dabbelt Cc: linux-kernel@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by: Paul Walmsley Signed-off-by: Paul Walmsley Signed-off-by: Palmer Dabbelt --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 32d444476a90..5ef3535dea5e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13821,7 +13821,7 @@ F: drivers/media/mmc/siano/ SIFIVE DRIVERS M: Palmer Dabbelt L: linux-riscv@lists.infradead.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux.git +T: git git://github.com/sifive/riscv-linux.git S: Supported K: sifive N: sifive From 3b56adcf94d03533666e87e41d23ac91756cec9b Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 17 Dec 2018 16:09:59 -0800 Subject: [PATCH 064/246] MAINTAINERS: SiFive drivers: add myself as a SiFive driver maintainer I'll be helping Palmer review drivers for SiFive-specific IP blocks, so add myself to the MAINTAINERS file. Cc: Albert Ou Cc: Palmer Dabbelt Cc: linux-kernel@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by: Paul Walmsley Signed-off-by: Paul Walmsley Signed-off-by: Palmer Dabbelt --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5ef3535dea5e..f3a226379e57 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13820,6 +13820,7 @@ F: drivers/media/mmc/siano/ SIFIVE DRIVERS M: Palmer Dabbelt +M: Paul Walmsley L: linux-riscv@lists.infradead.org T: git git://github.com/sifive/riscv-linux.git S: Supported From 2cffc9569050a8dbc0c4a6ee7186c0919487c3ec Mon Sep 17 00:00:00 2001 From: Zong Li Date: Fri, 7 Dec 2018 17:02:16 +0800 Subject: [PATCH 065/246] RISC-V: Support MODULE_SECTIONS mechanism on RV32 This patch supports dynamic generate got and plt sections mechanism on rv32. It contains the modification as follows: - Always enable MODULE_SECTIONS (both rv64 and rv32) - Change the fixed size type. This patch had been tested by following modules: btrfs 6795991 0 - Live 0xa544b000 test_static_keys 17304 0 - Live 0xa28be000 zstd_compress 1198986 1 btrfs, Live 0xa2a25000 zstd_decompress 608112 1 btrfs, Live 0xa24e7000 lzo 8787 0 - Live 0xa2049000 xor 27461 1 btrfs, Live 0xa2041000 zram 78849 0 - Live 0xa2276000 netdevsim 55909 0 - Live 0xa202d000 tun 211534 0 - Live 0xa21b5000 fuse 566049 0 - Live 0xa25fb000 nfs_layout_flexfiles 192597 0 - Live 0xa229b000 ramoops 74895 0 - Live 0xa2019000 xfs 3973221 0 - Live 0xa507f000 libcrc32c 3053 2 btrfs,xfs, Live 0xa34af000 lzo_compress 17302 2 btrfs,lzo, Live 0xa347d000 lzo_decompress 7178 2 btrfs,lzo, Live 0xa3451000 raid6_pq 142086 1 btrfs, Live 0xa33a4000 reed_solomon 31022 1 ramoops, Live 0xa31eb000 test_bitmap 3734 0 - Live 0xa31af000 test_bpf 1588736 0 - Live 0xa2c11000 test_kmod 41161 0 - Live 0xa29f8000 test_module 1356 0 - Live 0xa299e000 test_printf 6024 0 [permanent], Live 0xa2971000 test_static_key_base 5797 1 test_static_keys, Live 0xa2931000 test_user_copy 4382 0 - Live 0xa28c9000 xxhash 70501 2 zstd_compress,zstd_decompress, Live 0xa2055000 Signed-off-by: Zong Li Signed-off-by: Palmer Dabbelt --- arch/riscv/Kconfig | 2 +- arch/riscv/include/asm/module.h | 28 ++++++++++++++------------- arch/riscv/kernel/module-sections.c | 30 +++++++++++++++-------------- 3 files changed, 32 insertions(+), 28 deletions(-) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index e0d7d61779a6..6be2c08ff2b5 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -40,6 +40,7 @@ config RISCV select HAVE_ARCH_TRACEHOOK select HAVE_PCI select MODULES_USE_ELF_RELA if MODULES + select MODULE_SECTIONS if MODULES select THREAD_INFO_IN_TASK select PCI_DOMAINS_GENERIC if PCI select PCI_MSI if PCI @@ -152,7 +153,6 @@ choice bool "2GiB" config MAXPHYSMEM_128GB depends on 64BIT && CMODEL_MEDANY - select MODULE_SECTIONS if MODULES bool "128GiB" endchoice diff --git a/arch/riscv/include/asm/module.h b/arch/riscv/include/asm/module.h index cd2af4b013e3..46202dad365d 100644 --- a/arch/riscv/include/asm/module.h +++ b/arch/riscv/include/asm/module.h @@ -9,12 +9,12 @@ #define MODULE_ARCH_VERMAGIC "riscv" struct module; -u64 module_emit_got_entry(struct module *mod, u64 val); -u64 module_emit_plt_entry(struct module *mod, u64 val); +unsigned long module_emit_got_entry(struct module *mod, unsigned long val); +unsigned long module_emit_plt_entry(struct module *mod, unsigned long val); #ifdef CONFIG_MODULE_SECTIONS struct mod_section { - struct elf64_shdr *shdr; + Elf_Shdr *shdr; int num_entries; int max_entries; }; @@ -26,18 +26,18 @@ struct mod_arch_specific { }; struct got_entry { - u64 symbol_addr; /* the real variable address */ + unsigned long symbol_addr; /* the real variable address */ }; -static inline struct got_entry emit_got_entry(u64 val) +static inline struct got_entry emit_got_entry(unsigned long val) { return (struct got_entry) {val}; } -static inline struct got_entry *get_got_entry(u64 val, +static inline struct got_entry *get_got_entry(unsigned long val, const struct mod_section *sec) { - struct got_entry *got = (struct got_entry *)sec->shdr->sh_addr; + struct got_entry *got = (struct got_entry *)(sec->shdr->sh_addr); int i; for (i = 0; i < sec->num_entries; i++) { if (got[i].symbol_addr == val) @@ -62,7 +62,9 @@ struct plt_entry { #define REG_T0 0x5 #define REG_T1 0x6 -static inline struct plt_entry emit_plt_entry(u64 val, u64 plt, u64 got_plt) +static inline struct plt_entry emit_plt_entry(unsigned long val, + unsigned long plt, + unsigned long got_plt) { /* * U-Type encoding: @@ -76,7 +78,7 @@ static inline struct plt_entry emit_plt_entry(u64 val, u64 plt, u64 got_plt) * +------------+------------+--------+----------+----------+ * */ - u64 offset = got_plt - plt; + unsigned long offset = got_plt - plt; u32 hi20 = (offset + 0x800) & 0xfffff000; u32 lo12 = (offset - hi20); return (struct plt_entry) { @@ -86,7 +88,7 @@ static inline struct plt_entry emit_plt_entry(u64 val, u64 plt, u64 got_plt) }; } -static inline int get_got_plt_idx(u64 val, const struct mod_section *sec) +static inline int get_got_plt_idx(unsigned long val, const struct mod_section *sec) { struct got_entry *got_plt = (struct got_entry *)sec->shdr->sh_addr; int i; @@ -97,9 +99,9 @@ static inline int get_got_plt_idx(u64 val, const struct mod_section *sec) return -1; } -static inline struct plt_entry *get_plt_entry(u64 val, - const struct mod_section *sec_plt, - const struct mod_section *sec_got_plt) +static inline struct plt_entry *get_plt_entry(unsigned long val, + const struct mod_section *sec_plt, + const struct mod_section *sec_got_plt) { struct plt_entry *plt = (struct plt_entry *)sec_plt->shdr->sh_addr; int got_plt_idx = get_got_plt_idx(val, sec_got_plt); diff --git a/arch/riscv/kernel/module-sections.c b/arch/riscv/kernel/module-sections.c index bbbd26e19bfd..c9ae48333114 100644 --- a/arch/riscv/kernel/module-sections.c +++ b/arch/riscv/kernel/module-sections.c @@ -9,14 +9,14 @@ #include #include -u64 module_emit_got_entry(struct module *mod, u64 val) +unsigned long module_emit_got_entry(struct module *mod, unsigned long val) { struct mod_section *got_sec = &mod->arch.got; int i = got_sec->num_entries; struct got_entry *got = get_got_entry(val, got_sec); if (got) - return (u64)got; + return (unsigned long)got; /* There is no duplicate entry, create a new one */ got = (struct got_entry *)got_sec->shdr->sh_addr; @@ -25,10 +25,10 @@ u64 module_emit_got_entry(struct module *mod, u64 val) got_sec->num_entries++; BUG_ON(got_sec->num_entries > got_sec->max_entries); - return (u64)&got[i]; + return (unsigned long)&got[i]; } -u64 module_emit_plt_entry(struct module *mod, u64 val) +unsigned long module_emit_plt_entry(struct module *mod, unsigned long val) { struct mod_section *got_plt_sec = &mod->arch.got_plt; struct got_entry *got_plt; @@ -37,27 +37,29 @@ u64 module_emit_plt_entry(struct module *mod, u64 val) int i = plt_sec->num_entries; if (plt) - return (u64)plt; + return (unsigned long)plt; /* There is no duplicate entry, create a new one */ got_plt = (struct got_entry *)got_plt_sec->shdr->sh_addr; got_plt[i] = emit_got_entry(val); plt = (struct plt_entry *)plt_sec->shdr->sh_addr; - plt[i] = emit_plt_entry(val, (u64)&plt[i], (u64)&got_plt[i]); + plt[i] = emit_plt_entry(val, + (unsigned long)&plt[i], + (unsigned long)&got_plt[i]); plt_sec->num_entries++; got_plt_sec->num_entries++; BUG_ON(plt_sec->num_entries > plt_sec->max_entries); - return (u64)&plt[i]; + return (unsigned long)&plt[i]; } -static int is_rela_equal(const Elf64_Rela *x, const Elf64_Rela *y) +static int is_rela_equal(const Elf_Rela *x, const Elf_Rela *y) { return x->r_info == y->r_info && x->r_addend == y->r_addend; } -static bool duplicate_rela(const Elf64_Rela *rela, int idx) +static bool duplicate_rela(const Elf_Rela *rela, int idx) { int i; for (i = 0; i < idx; i++) { @@ -67,13 +69,13 @@ static bool duplicate_rela(const Elf64_Rela *rela, int idx) return false; } -static void count_max_entries(Elf64_Rela *relas, int num, +static void count_max_entries(Elf_Rela *relas, int num, unsigned int *plts, unsigned int *gots) { unsigned int type, i; for (i = 0; i < num; i++) { - type = ELF64_R_TYPE(relas[i].r_info); + type = ELF_RISCV_R_TYPE(relas[i].r_info); if (type == R_RISCV_CALL_PLT) { if (!duplicate_rela(relas, i)) (*plts)++; @@ -118,9 +120,9 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, /* Calculate the maxinum number of entries */ for (i = 0; i < ehdr->e_shnum; i++) { - Elf64_Rela *relas = (void *)ehdr + sechdrs[i].sh_offset; - int num_rela = sechdrs[i].sh_size / sizeof(Elf64_Rela); - Elf64_Shdr *dst_sec = sechdrs + sechdrs[i].sh_info; + Elf_Rela *relas = (void *)ehdr + sechdrs[i].sh_offset; + int num_rela = sechdrs[i].sh_size / sizeof(Elf_Rela); + Elf_Shdr *dst_sec = sechdrs + sechdrs[i].sh_info; if (sechdrs[i].sh_type != SHT_RELA) continue; From efe75c494f57890900caf6c8a0667db35bfaf56a Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Mon, 29 Oct 2018 11:48:53 +0100 Subject: [PATCH 066/246] riscv: add audit support On RISC-V (riscv) audit is supported through generic lib/audit.c. The patch adds required arch specific definitions. Signed-off-by: David Abdurachmanov Signed-off-by: Palmer Dabbelt --- arch/riscv/Kconfig | 1 + arch/riscv/include/asm/ptrace.h | 5 +++++ arch/riscv/include/asm/syscall.h | 10 ++++++++++ arch/riscv/include/asm/thread_info.h | 6 ++++++ arch/riscv/kernel/entry.S | 4 ++-- include/uapi/linux/audit.h | 2 ++ 6 files changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 55da93f4e818..38787c48d76c 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -28,6 +28,7 @@ config RISCV select GENERIC_STRNLEN_USER select GENERIC_SMP_IDLE_THREAD select GENERIC_ATOMIC64 if !64BIT || !RISCV_ISA_A + select HAVE_ARCH_AUDITSYSCALL select HAVE_MEMBLOCK_NODE_MAP select HAVE_DMA_CONTIGUOUS select HAVE_FUTEX_CMPXCHG if FUTEX diff --git a/arch/riscv/include/asm/ptrace.h b/arch/riscv/include/asm/ptrace.h index bbe1862e8f80..d35ec2f41381 100644 --- a/arch/riscv/include/asm/ptrace.h +++ b/arch/riscv/include/asm/ptrace.h @@ -113,6 +113,11 @@ static inline void frame_pointer_set(struct pt_regs *regs, SET_FP(regs, val); } +static inline unsigned long regs_return_value(struct pt_regs *regs) +{ + return regs->a0; +} + #endif /* __ASSEMBLY__ */ #endif /* _ASM_RISCV_PTRACE_H */ diff --git a/arch/riscv/include/asm/syscall.h b/arch/riscv/include/asm/syscall.h index 8d25f8904c00..bba3da6ef157 100644 --- a/arch/riscv/include/asm/syscall.h +++ b/arch/riscv/include/asm/syscall.h @@ -18,6 +18,7 @@ #ifndef _ASM_RISCV_SYSCALL_H #define _ASM_RISCV_SYSCALL_H +#include #include #include @@ -99,4 +100,13 @@ static inline void syscall_set_arguments(struct task_struct *task, memcpy(®s->a1 + i * sizeof(regs->a1), args, n * sizeof(regs->a0)); } +static inline int syscall_get_arch(void) +{ +#ifdef CONFIG_64BIT + return AUDIT_ARCH_RISCV64; +#else + return AUDIT_ARCH_RISCV32; +#endif +} + #endif /* _ASM_RISCV_SYSCALL_H */ diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h index f8fa1cd2dad9..1c9cc8389928 100644 --- a/arch/riscv/include/asm/thread_info.h +++ b/arch/riscv/include/asm/thread_info.h @@ -80,13 +80,19 @@ struct thread_info { #define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */ #define TIF_MEMDIE 5 /* is terminating due to OOM killer */ #define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_WORK_MASK \ (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED) +#define _TIF_SYSCALL_WORK \ + (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT) + #endif /* _ASM_RISCV_THREAD_INFO_H */ diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S index 13d4826ab2a1..355166f57205 100644 --- a/arch/riscv/kernel/entry.S +++ b/arch/riscv/kernel/entry.S @@ -201,7 +201,7 @@ handle_syscall: REG_S s2, PT_SEPC(sp) /* Trace syscalls, but only if requested by the user. */ REG_L t0, TASK_TI_FLAGS(tp) - andi t0, t0, _TIF_SYSCALL_TRACE + andi t0, t0, _TIF_SYSCALL_WORK bnez t0, handle_syscall_trace_enter check_syscall_nr: /* Check to make sure we don't jump to a bogus syscall number. */ @@ -221,7 +221,7 @@ ret_from_syscall: REG_S a0, PT_A0(sp) /* Trace syscalls, but only if requested by the user. */ REG_L t0, TASK_TI_FLAGS(tp) - andi t0, t0, _TIF_SYSCALL_TRACE + andi t0, t0, _TIF_SYSCALL_WORK bnez t0, handle_syscall_trace_exit ret_from_exception: diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 818ae690ab79..d0e037a96a7b 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -399,6 +399,8 @@ enum { /* do not define AUDIT_ARCH_PPCLE since it is not supported by audit */ #define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_PPC64LE (EM_PPC64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_RISCV32 (EM_RISCV|__AUDIT_ARCH_LE) +#define AUDIT_ARCH_RISCV64 (EM_RISCV|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_S390 (EM_S390) #define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_SH (EM_SH) From 0aea89430a4c79c65c541c947497007d33fbe002 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Mon, 29 Oct 2018 11:48:54 +0100 Subject: [PATCH 067/246] riscv: audit: add audit hook in do_syscall_trace_enter/exit() This patch adds auditing functions on entry to and exit from every system call invocation. Signed-off-by: David Abdurachmanov Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/ptrace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c index 60f1e02eed36..c1b51539c3e2 100644 --- a/arch/riscv/kernel/ptrace.c +++ b/arch/riscv/kernel/ptrace.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -163,10 +164,14 @@ void do_syscall_trace_enter(struct pt_regs *regs) if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) trace_sys_enter(regs, syscall_get_nr(current, regs)); #endif + + audit_syscall_entry(regs->a7, regs->a0, regs->a1, regs->a2, regs->a3); } void do_syscall_trace_exit(struct pt_regs *regs) { + audit_syscall_exit(regs); + if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, 0); From 45ef1aa8a0e3b0da449c619035b0841f28abca63 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Mon, 10 Dec 2018 21:43:54 +0100 Subject: [PATCH 068/246] riscv: define NR_syscalls in unistd.h This macro is used by kernel/trace/{trace.h,trace_syscalls.c} if we have CONFIG_FTRACE_SYSCALLS enabled. Signed-off-by: David Abdurachmanov Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt --- arch/riscv/include/asm/unistd.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/include/asm/unistd.h b/arch/riscv/include/asm/unistd.h index fef96f117b4d..073ee80fdf74 100644 --- a/arch/riscv/include/asm/unistd.h +++ b/arch/riscv/include/asm/unistd.h @@ -19,3 +19,5 @@ #define __ARCH_WANT_SYS_CLONE #include + +#define NR_syscalls (__NR_syscalls) From 008e901b70282183b52ee80d838d2994b2610231 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Mon, 10 Dec 2018 21:43:55 +0100 Subject: [PATCH 069/246] riscv: define CREATE_TRACE_POINTS in ptrace.c Define CREATE_TRACE_POINTS in order to create functions and structures for the trace events. This is needed if HAVE_SYSCALL_TRACEPOINTS and CONFIG_FTRACE_SYSCALLS are enabled, otherwise we get linking errors: [..] MODPOST vmlinux.o kernel/trace/trace_syscalls.o: In function `.L0 ': trace_syscalls.c:(.text+0x1152): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x126c): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x1328): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x14aa): undefined reference to `__tracepoint_sys_enter' trace_syscalls.c:(.text+0x1684): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x17a0): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x185c): undefined reference to `__tracepoint_sys_exit' trace_syscalls.c:(.text+0x19de): undefined reference to `__tracepoint_sys_exit' arch/riscv/kernel/ptrace.o: In function `.L0 ': ptrace.c:(.text+0x4dc): undefined reference to `__tracepoint_sys_enter' ptrace.c:(.text+0x632): undefined reference to `__tracepoint_sys_exit' make: *** [Makefile:1036: vmlinux] Error 1 Signed-off-by: David Abdurachmanov Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig") Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/ptrace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c index c1b51539c3e2..a34c98b49dcb 100644 --- a/arch/riscv/kernel/ptrace.c +++ b/arch/riscv/kernel/ptrace.c @@ -25,6 +25,8 @@ #include #include #include + +#define CREATE_TRACE_POINTS #include enum riscv_regset { From 775800b0f1d7303d4fd8ce0e0d9eca4ff2f338f2 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Thu, 6 Dec 2018 16:26:34 +0100 Subject: [PATCH 070/246] riscv: fix trace_sys_exit hook Fix compilation error. Signed-off-by: David Abdurachmanov Signed-off-by: Palmer Dabbelt --- arch/riscv/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c index a34c98b49dcb..2ae5e0284f56 100644 --- a/arch/riscv/kernel/ptrace.c +++ b/arch/riscv/kernel/ptrace.c @@ -179,6 +179,6 @@ void do_syscall_trace_exit(struct pt_regs *regs) #ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) - trace_sys_exit(regs, regs->regs[0]); + trace_sys_exit(regs, regs_return_value(regs)); #endif } From 5aeb1b36cedd3a1dfdbfe368629fed52dee34103 Mon Sep 17 00:00:00 2001 From: David Abdurachmanov Date: Thu, 6 Dec 2018 16:26:35 +0100 Subject: [PATCH 071/246] riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig I looked into Documentation/trace/ftrace-design.rst and, I think, we check all the boxes needed for HAVE_SYSCALL_TRACEPOINTS. Signed-off-by: David Abdurachmanov Signed-off-by: Palmer Dabbelt --- arch/riscv/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 38787c48d76c..0ae078655c1b 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -34,6 +34,7 @@ config RISCV select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_GENERIC_DMA_COHERENT select HAVE_PERF_EVENTS + select HAVE_SYSCALL_TRACEPOINTS select IRQ_DOMAIN select RISCV_ISA_A if SMP select SPARSE_IRQ From 34aabf918717dd14e05051896aaecd3b16b53d95 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Fri, 28 Dec 2018 16:15:41 +0100 Subject: [PATCH 072/246] usb: cdc-acm: send ZLP for Telit 3G Intel based modems Telit 3G Intel based modems require zero packet to be sent if out data size is equal to the endpoint max packet size. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index ed8c62b2d9d1..739f8960811a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1865,6 +1865,13 @@ static const struct usb_device_id acm_ids[] = { .driver_info = IGNORE_DEVICE, }, + { USB_DEVICE(0x1bc7, 0x0021), /* Telit 3G ACM only composition */ + .driver_info = SEND_ZERO_PACKET, + }, + { USB_DEVICE(0x1bc7, 0x0023), /* Telit 3G ACM + ECM composition */ + .driver_info = SEND_ZERO_PACKET, + }, + /* control interfaces without any protocol set */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, USB_CDC_PROTO_NONE) }, From c5603d2fdb424849360fe7e3f8c1befc97571b8c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Thu, 3 Jan 2019 11:26:17 +0800 Subject: [PATCH 073/246] USB: storage: don't insert sane sense for SPC3+ when bad sense specified Currently the code will set US_FL_SANE_SENSE flag unconditionally if device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to prevent this behavior, because SMI SM3350 UFS-USB bridge controller, which claims SPC4, will show strange behavior with 96-byte sense (put the chip into a wrong state that cannot read/write anything). Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on SPC4+ devices. Signed-off-by: Icenowy Zheng Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index fde2e71a6ade..a73ea495d5a7 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -235,8 +235,12 @@ static int slave_configure(struct scsi_device *sdev) if (!(us->fflags & US_FL_NEEDS_CAP16)) sdev->try_rc_10_first = 1; - /* assume SPC3 or latter devices support sense size > 18 */ - if (sdev->scsi_level > SCSI_SPC_2) + /* + * assume SPC3 or latter devices support sense size > 18 + * unless US_FL_BAD_SENSE quirk is specified. + */ + if (sdev->scsi_level > SCSI_SPC_2 && + !(us->fflags & US_FL_BAD_SENSE)) us->fflags |= US_FL_SANE_SENSE; /* From 0a99cc4b8ee83885ab9f097a3737d1ab28455ac0 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Thu, 3 Jan 2019 11:26:18 +0800 Subject: [PATCH 074/246] USB: storage: add quirk for SMI SM3350 The SMI SM3350 USB-UFS bridge controller cannot handle long sense request correctly and will make the chip refuse to do read/write when requested long sense. Add a bad sense quirk for it. Signed-off-by: Icenowy Zheng Cc: stable Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f7f83b21dc74..ea0d27a94afe 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* + * Reported by Icenowy Zheng + * The SMI SM3350 USB-UFS bridge controller will enter a wrong state + * that do not process read/write command if a long sense is requested, + * so force to use 18-byte sense. + */ +UNUSUAL_DEV( 0x090c, 0x3350, 0x0000, 0xffff, + "SMI", + "SM3350 UFS-to-USB-Mass-Storage bridge", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_BAD_SENSE ), + /* * Reported by Paul Hartman * This card reader returns "Illegal Request, Logical Block Address From ff2a8c532c14fd22fb26a36574d9ff199afbbe54 Mon Sep 17 00:00:00 2001 From: Saranya Gopal Date: Sun, 6 Jan 2019 08:14:02 +0530 Subject: [PATCH 075/246] usbcore: Select only first configuration for non-UAC3 compliant devices In most of the UAC1 and UAC2 audio devices, the first configuration is most often the best configuration. However, with recent patch to support UAC3 configuration, second configuration was unintentionally chosen for some of the UAC1/2 devices that had more than one configuration. This was because of the existing check after the audio config check which selected any config which had a non-vendor class. This patch fixes this issue. Fixes: f13912d3f014 ("usbcore: Select UAC3 configuration for audio if present") Reported-by: Con Kolivas Signed-off-by: Saranya Gopal Tested-by: Con Kolivas Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/generic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 356b05c82dbc..f713cecc1f41 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -143,9 +143,12 @@ int usb_choose_configuration(struct usb_device *udev) continue; } - if (i > 0 && desc && is_audio(desc) && is_uac3_config(desc)) { - best = c; - break; + if (i > 0 && desc && is_audio(desc)) { + if (is_uac3_config(desc)) { + best = c; + break; + } + continue; } /* From the remaining configs, choose the first one whose From 3483254b89438e60f719937376c5e0ce2bc46761 Mon Sep 17 00:00:00 2001 From: Jack Stocker Date: Thu, 3 Jan 2019 21:56:53 +0000 Subject: [PATCH 076/246] USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB To match the Corsair Strafe RGB, the Corsair K70 RGB also requires USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues discussed here: https://github.com/ckb-next/ckb-next/issues/42. Otherwise roughly 1 in 10 boots the keyboard will fail to be detected. Patch that applied delay control quirk for Corsair Strafe RGB: cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20") Previous K70 RGB patch to add delay-init quirk: 7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards") Signed-off-by: Jack Stocker Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 514c5214ddb2..8bc35d53408b 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -394,7 +394,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, /* Corsair K70 RGB */ - { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_DELAY_CTRL_MSG }, /* Corsair Strafe */ { USB_DEVICE(0x1b1c, 0x1b15), .driver_info = USB_QUIRK_DELAY_INIT | From 6b68835b5af4feb2a3f31592a52a1a68d7c1b1f3 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Mon, 7 Jan 2019 16:42:07 +0000 Subject: [PATCH 077/246] ACPI/IORT: Fix build when CONFIG_IOMMU_API=n Commit 8097e53eaba2 ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec") changed by mistake the iort_fwspec_iommu_ops() stub definition (compiled in when CONFIG_IOMMU_API=n), that caused the following compilation failure: drivers/acpi/arm64/iort.c:880:1: error: expected identifier or '(' before '{' token { return NULL; } ^ drivers/acpi/arm64/iort.c:879:39: warning: 'iort_fwspec_iommu_ops' used but never defined static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev); ^~~~~~~~~~~~~~~~~~~~~ Fix it. Fixes: 8097e53eaba2 ("ACPI/IORT: Use helper functions to access dev->iommu_fwspec") Signed-off-by: Qian Cai [lorenzo.pieralisi@arm.com: updated tags and log] Signed-off-by: Lorenzo Pieralisi Acked-by: Hanjun Guo Cc: Will Deacon Cc: Sudeep Holla Cc: Catalin Marinas Cc: Joerg Roedel Signed-off-by: Will Deacon --- drivers/acpi/arm64/iort.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index fdd90ffceb85..5d29783ee5bd 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -876,7 +876,7 @@ int iort_iommu_msi_get_resv_regions(struct device *dev, struct list_head *head) return (resv == its->its_count) ? resv : -ENODEV; } #else -static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev); +static inline const struct iommu_ops *iort_fwspec_iommu_ops(struct device *dev) { return NULL; } static inline int iort_add_device_replay(const struct iommu_ops *ops, struct device *dev) From 02b2f549d502b46e68b97ea1452fb8853b3327dd Mon Sep 17 00:00:00 2001 From: Dongsheng Yang Date: Tue, 18 Dec 2018 04:31:48 -0500 Subject: [PATCH 078/246] libceph: allow setting abort_on_full for rbd Introduce a new option abort_on_full, default to false. Then we can get -ENOSPC when the pool is full, or reaches quota. [ Don't show abort_on_full in /proc/mounts. ] Signed-off-by: Dongsheng Yang Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- fs/ceph/super.c | 4 ++-- include/linux/ceph/libceph.h | 6 ++++-- include/linux/ceph/osd_client.h | 1 - net/ceph/ceph_common.c | 11 ++++++++++- net/ceph/debugfs.c | 2 +- net/ceph/osd_client.c | 4 ++-- 6 files changed, 19 insertions(+), 9 deletions(-) diff --git a/fs/ceph/super.c b/fs/ceph/super.c index 4e9a7cc488da..da2cd8e89062 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -530,7 +530,7 @@ static int ceph_show_options(struct seq_file *m, struct dentry *root) seq_putc(m, ','); pos = m->count; - ret = ceph_print_client_options(m, fsc->client); + ret = ceph_print_client_options(m, fsc->client, false); if (ret) return ret; @@ -640,7 +640,7 @@ static struct ceph_fs_client *create_fs_client(struct ceph_mount_options *fsopt, opt = NULL; /* fsc->client now owns this */ fsc->client->extra_mon_dispatch = extra_mon_dispatch; - fsc->client->osdc.abort_on_full = true; + ceph_set_opt(fsc->client, ABORT_ON_FULL); if (!fsopt->mds_namespace) { ceph_monc_want_map(&fsc->client->monc, CEPH_SUB_MDSMAP, diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 68bb09c29ce8..a420c07904bc 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -35,6 +35,7 @@ #define CEPH_OPT_NOMSGAUTH (1<<4) /* don't require msg signing feat */ #define CEPH_OPT_TCP_NODELAY (1<<5) /* TCP_NODELAY on TCP sockets */ #define CEPH_OPT_NOMSGSIGN (1<<6) /* don't sign msgs */ +#define CEPH_OPT_ABORT_ON_FULL (1<<7) /* abort w/ ENOSPC when full */ #define CEPH_OPT_DEFAULT (CEPH_OPT_TCP_NODELAY) @@ -53,7 +54,7 @@ struct ceph_options { unsigned long osd_request_timeout; /* jiffies */ /* - * any type that can't be simply compared or doesn't need need + * any type that can't be simply compared or doesn't need * to be compared should go beyond this point, * ceph_compare_options() should be updated accordingly */ @@ -281,7 +282,8 @@ extern struct ceph_options *ceph_parse_options(char *options, const char *dev_name, const char *dev_name_end, int (*parse_extra_token)(char *c, void *private), void *private); -int ceph_print_client_options(struct seq_file *m, struct ceph_client *client); +int ceph_print_client_options(struct seq_file *m, struct ceph_client *client, + bool show_all); extern void ceph_destroy_options(struct ceph_options *opt); extern int ceph_compare_options(struct ceph_options *new_opt, struct ceph_client *client); diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 7a2af5034278..2294f963dab7 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -354,7 +354,6 @@ struct ceph_osd_client { struct rb_root linger_map_checks; atomic_t num_requests; atomic_t num_homeless; - bool abort_on_full; /* abort w/ ENOSPC when full */ int abort_err; struct delayed_work timeout_work; struct delayed_work osds_timeout_work; diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c index 87afb9ec4c68..9cab80207ced 100644 --- a/net/ceph/ceph_common.c +++ b/net/ceph/ceph_common.c @@ -255,6 +255,7 @@ enum { Opt_nocephx_sign_messages, Opt_tcp_nodelay, Opt_notcp_nodelay, + Opt_abort_on_full, }; static match_table_t opt_tokens = { @@ -280,6 +281,7 @@ static match_table_t opt_tokens = { {Opt_nocephx_sign_messages, "nocephx_sign_messages"}, {Opt_tcp_nodelay, "tcp_nodelay"}, {Opt_notcp_nodelay, "notcp_nodelay"}, + {Opt_abort_on_full, "abort_on_full"}, {-1, NULL} }; @@ -535,6 +537,10 @@ ceph_parse_options(char *options, const char *dev_name, opt->flags &= ~CEPH_OPT_TCP_NODELAY; break; + case Opt_abort_on_full: + opt->flags |= CEPH_OPT_ABORT_ON_FULL; + break; + default: BUG_ON(token); } @@ -549,7 +555,8 @@ out: } EXPORT_SYMBOL(ceph_parse_options); -int ceph_print_client_options(struct seq_file *m, struct ceph_client *client) +int ceph_print_client_options(struct seq_file *m, struct ceph_client *client, + bool show_all) { struct ceph_options *opt = client->options; size_t pos = m->count; @@ -574,6 +581,8 @@ int ceph_print_client_options(struct seq_file *m, struct ceph_client *client) seq_puts(m, "nocephx_sign_messages,"); if ((opt->flags & CEPH_OPT_TCP_NODELAY) == 0) seq_puts(m, "notcp_nodelay,"); + if (show_all && (opt->flags & CEPH_OPT_ABORT_ON_FULL)) + seq_puts(m, "abort_on_full,"); if (opt->mount_timeout != CEPH_MOUNT_TIMEOUT_DEFAULT) seq_printf(m, "mount_timeout=%d,", diff --git a/net/ceph/debugfs.c b/net/ceph/debugfs.c index 02952605d121..46f65709a6ff 100644 --- a/net/ceph/debugfs.c +++ b/net/ceph/debugfs.c @@ -375,7 +375,7 @@ static int client_options_show(struct seq_file *s, void *p) struct ceph_client *client = s->private; int ret; - ret = ceph_print_client_options(s, client); + ret = ceph_print_client_options(s, client, true); if (ret) return ret; diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index d23a9f81f3d7..fa9530dd876e 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -2315,7 +2315,7 @@ again: (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) || pool_full(osdc, req->r_t.base_oloc.pool))) { dout("req %p full/pool_full\n", req); - if (osdc->abort_on_full) { + if (ceph_test_opt(osdc->client, ABORT_ON_FULL)) { err = -ENOSPC; } else { pr_warn_ratelimited("FULL or reached pool quota\n"); @@ -2545,7 +2545,7 @@ static void ceph_osdc_abort_on_full(struct ceph_osd_client *osdc) { bool victims = false; - if (osdc->abort_on_full && + if (ceph_test_opt(osdc->client, ABORT_ON_FULL) && (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) || have_pool_full(osdc))) for_each_request(osdc, abort_on_full_fn, &victims); } From c64a2b0516a02361d8deb1f038647c29020d0852 Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Sat, 5 Jan 2019 01:00:29 +0530 Subject: [PATCH 079/246] ceph: use vmf_error() in ceph_filemap_fault() This code is converted to use vmf_error(). Signed-off-by: Souptick Joarder Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- fs/ceph/addr.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 5d0c05e288cc..a47c541f8006 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -1494,10 +1494,7 @@ static vm_fault_t ceph_filemap_fault(struct vm_fault *vmf) if (err < 0 || off >= i_size_read(inode)) { unlock_page(page); put_page(page); - if (err == -ENOMEM) - ret = VM_FAULT_OOM; - else - ret = VM_FAULT_SIGBUS; + ret = vmf_error(err); goto out_inline; } if (err < PAGE_SIZE) From a77d1d196bc63b37d9b4d1b614884669e8e79d32 Mon Sep 17 00:00:00 2001 From: Tycho Andersen Date: Mon, 7 Jan 2019 16:16:31 -0700 Subject: [PATCH 080/246] samples/seccomp: Fix 32-bit build Both the .o and the actual executable need to be built with -m32 in order to link correctly. Reported-by: Ingo Molnar Signed-off-by: Tycho Andersen Reviewed-by: Kees Cook Cc: Borislav Petkov Cc: James Morris Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: fec7b6690541 ("samples: add an example of seccomp user trap") Link: http://lkml.kernel.org/r/20190107231631.1849-1-tycho@tycho.ws Signed-off-by: Ingo Molnar --- samples/seccomp/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/samples/seccomp/Makefile b/samples/seccomp/Makefile index 4920903c8009..fb43a814d4c0 100644 --- a/samples/seccomp/Makefile +++ b/samples/seccomp/Makefile @@ -34,6 +34,7 @@ HOSTCFLAGS_bpf-direct.o += $(MFLAG) HOSTCFLAGS_dropper.o += $(MFLAG) HOSTCFLAGS_bpf-helper.o += $(MFLAG) HOSTCFLAGS_bpf-fancy.o += $(MFLAG) +HOSTCFLAGS_user-trap.o += $(MFLAG) HOSTLDLIBS_bpf-direct += $(MFLAG) HOSTLDLIBS_bpf-fancy += $(MFLAG) HOSTLDLIBS_dropper += $(MFLAG) From 1524f4e47f90b27a3ac84efbdd94c63172246a6f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 8 Jan 2019 10:43:30 +0300 Subject: [PATCH 081/246] ALSA: cs46xx: Potential NULL dereference in probe The "chip->dsp_spos_instance" can be NULL on some of the ealier error paths in snd_cs46xx_create(). Reported-by: "Yavuz, Tuba" Signed-off-by: Dan Carpenter Cc: Signed-off-by: Takashi Iwai --- sound/pci/cs46xx/dsp_spos.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/cs46xx/dsp_spos.c b/sound/pci/cs46xx/dsp_spos.c index 598d140bb7cb..5fc497c6d738 100644 --- a/sound/pci/cs46xx/dsp_spos.c +++ b/sound/pci/cs46xx/dsp_spos.c @@ -903,6 +903,9 @@ int cs46xx_dsp_proc_done (struct snd_cs46xx *chip) struct dsp_spos_instance * ins = chip->dsp_spos_instance; int i; + if (!ins) + return 0; + snd_info_free_entry(ins->proc_sym_info_entry); ins->proc_sym_info_entry = NULL; From 2f66196208c98b3d1b4294edffb2c5a8197be899 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Mon, 7 Jan 2019 18:51:53 +0000 Subject: [PATCH 082/246] cpufreq: check if policy is inactive early in __cpufreq_get() cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by: Sudeep Holla Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 7aa3dcad2175..df34a12a388f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1530,17 +1530,16 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy) { unsigned int ret_freq = 0; - if (!cpufreq_driver->get) + if (unlikely(policy_is_inactive(policy)) || !cpufreq_driver->get) return ret_freq; ret_freq = cpufreq_driver->get(policy->cpu); /* - * Updating inactive policies is invalid, so avoid doing that. Also - * if fast frequency switching is used with the given policy, the check + * If fast frequency switching is used with the given policy, the check * against policy->cur is pointless, so skip it in that case too. */ - if (unlikely(policy_is_inactive(policy)) || policy->fast_switch_enabled) + if (policy->fast_switch_enabled) return ret_freq; if (ret_freq && policy->cur && @@ -1569,10 +1568,7 @@ unsigned int cpufreq_get(unsigned int cpu) if (policy) { down_read(&policy->rwsem); - - if (!policy_is_inactive(policy)) - ret_freq = __cpufreq_get(policy); - + ret_freq = __cpufreq_get(policy); up_read(&policy->rwsem); cpufreq_cpu_put(policy); From 81d9bdf59092e4755fc4307c93c4589ef0fe2e0f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 23 Dec 2018 01:31:26 +0100 Subject: [PATCH 083/246] mtd: rawnand: qcom: fix memory corruption that causes panic This patch fixes a memory corruption that occurred in the qcom-nandc driver since it was converted to nand_scan(). On boot, an affected device will panic from a NPE at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 0 | pgd = (ptrval) | [00000000] *pgd=00000000 | Internal error: Oops: 80000005 [#1] SMP ARM | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0 | Hardware name: Generic DT based system | PC is at (null) | LR is at nand_block_isbad+0x90/0xa4 | pc : [<00000000>] lr : [] psr: 80000013 | sp : cf839d40 ip : 00000000 fp : cfae9e20 | r10: cf815810 r9 : 00000000 r8 : 00000000 | r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : cf815810 | r3 : 00000000 r2 : cfae9810 r1 : ffffffff r0 : cf815810 | Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | [] (nand_block_isbad) from [] | [] (allocate_partition) from [] | [] (add_mtd_partitions) from [] | [] (parse_mtd_partitions) from [] | [] (mtd_device_parse_register) from [] | [] (qcom_nandc_probe) from [] The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_block_bad() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch restores the old behavior by reallocating the shared bam transaction alloc_bam_transaction() after the chip was identified, but before mtd_device_parse_register() (which is an alias for mtd_device_register() - see panic) gets called. This fixes the corruption and the driver is working again. Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Signed-off-by: Christian Lamparter Acked-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/raw/qcom_nandc.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 46c62a31fa46..920e7375084f 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2833,6 +2833,16 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, if (ret) return ret; + if (nandc->props->is_bam) { + free_bam_transaction(nandc); + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } + ret = mtd_device_register(mtd, NULL, 0); if (ret) nand_cleanup(chip); @@ -2847,16 +2857,6 @@ static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) struct qcom_nand_host *host; int ret; - if (nandc->props->is_bam) { - free_bam_transaction(nandc); - nandc->bam_txn = alloc_bam_transaction(nandc); - if (!nandc->bam_txn) { - dev_err(nandc->dev, - "failed to allocate bam transaction\n"); - return -ENOMEM; - } - } - for_each_available_child_of_node(dn, child) { host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); if (!host) { From f553aa1c13cbc29aaf420349a28fc33ca98440e5 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Tue, 8 Jan 2019 19:52:22 +0800 Subject: [PATCH 084/246] csky: fixup relocation error with 807 & 860 810 doesn't support jsri instruction and csky-as will leave jsri + nop for relocation. Module-probe need replace them with lrw + jsr. Signed-off-by: Guo Ren Cc: Hui Kai --- arch/csky/kernel/module.c | 38 ++++++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 16 deletions(-) diff --git a/arch/csky/kernel/module.c b/arch/csky/kernel/module.c index 65abab0c7a47..0b028ee3c764 100644 --- a/arch/csky/kernel/module.c +++ b/arch/csky/kernel/module.c @@ -12,7 +12,7 @@ #include #include -#if defined(__CSKYABIV2__) +#ifdef CONFIG_CPU_CK810 #define IS_BSR32(hi16, lo16) (((hi16) & 0xFC00) == 0xE000) #define IS_JSRI32(hi16, lo16) ((hi16) == 0xEAE0) @@ -25,6 +25,26 @@ *(uint16_t *)(addr) = 0xE8Fa; \ *((uint16_t *)(addr) + 1) = 0x0000; \ } while (0) + +static void jsri_2_lrw_jsr(uint32_t *location) +{ + uint16_t location_tmp = (uint16_t *)location; + + if (IS_BSR32(*location_tmp, *(location_tmp + 1))) + return; + + if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) { + /* jsri 0x... --> lrw r26, 0x... */ + CHANGE_JSRI_TO_LRW(location); + /* lsli r0, r0 --> jsr r26 */ + SET_JSR32_R26(location + 1); + } +} +#else +static void inline jsri_2_lrw_jsr(uint32_t *location) +{ + return; +} #endif int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, @@ -35,9 +55,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, Elf32_Sym *sym; uint32_t *location; short *temp; -#if defined(__CSKYABIV2__) - uint16_t *location_tmp; -#endif for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ @@ -59,18 +76,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, case R_CSKY_PCRELJSR_IMM11BY2: break; case R_CSKY_PCRELJSR_IMM26BY2: -#if defined(__CSKYABIV2__) - location_tmp = (uint16_t *)location; - if (IS_BSR32(*location_tmp, *(location_tmp + 1))) - break; - - if (IS_JSRI32(*location_tmp, *(location_tmp + 1))) { - /* jsri 0x... --> lrw r26, 0x... */ - CHANGE_JSRI_TO_LRW(location); - /* lsli r0, r0 --> jsr r26 */ - SET_JSR32_R26(location + 1); - } -#endif + jsri_2_lrw_jsr(location); break; case R_CSKY_ADDR_HI16: temp = ((short *)location) + 1; From 750afb08ca71310fcf0c4e2cb1565c63b8235b60 Mon Sep 17 00:00:00 2001 From: Luis Chamberlain Date: Fri, 4 Jan 2019 09:23:09 +0100 Subject: [PATCH 085/246] cross-tree: phase out dma_zalloc_coherent() We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig Signed-off-by: Luis Chamberlain [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig --- arch/mips/lantiq/xway/dma.c | 6 +- arch/powerpc/platforms/pasemi/dma_lib.c | 2 +- arch/powerpc/sysdev/fsl_rmu.c | 7 +- drivers/ata/sata_fsl.c | 4 +- drivers/atm/he.c | 39 ++++++----- drivers/atm/idt77252.c | 16 ++--- drivers/block/skd_main.c | 4 +- drivers/crypto/amcc/crypto4xx_core.c | 6 +- drivers/crypto/cavium/cpt/cptpf_main.c | 4 +- drivers/crypto/cavium/cpt/cptvf_main.c | 7 +- drivers/crypto/cavium/nitrox/nitrox_lib.c | 6 +- drivers/crypto/ccp/ccp-dev-v5.c | 6 +- drivers/crypto/hisilicon/sec/sec_algs.c | 4 +- drivers/crypto/hisilicon/sec/sec_drv.c | 15 ++-- drivers/crypto/ixp4xx_crypto.c | 6 +- drivers/crypto/mediatek/mtk-platform.c | 16 ++--- drivers/crypto/qat/qat_common/adf_admin.c | 12 ++-- drivers/crypto/qat/qat_common/qat_algs.c | 24 +++---- drivers/crypto/qat/qat_common/qat_asym_algs.c | 68 +++++++++---------- drivers/dma/imx-sdma.c | 8 +-- drivers/dma/mediatek/mtk-hsdma.c | 4 +- drivers/dma/mxs-dma.c | 6 +- drivers/dma/xgene-dma.c | 4 +- drivers/dma/xilinx/xilinx_dma.c | 14 ++-- drivers/dma/xilinx/zynqmp_dma.c | 6 +- drivers/gpu/drm/drm_pci.c | 5 +- drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 4 +- drivers/infiniband/hw/bnxt_re/qplib_res.c | 8 +-- drivers/infiniband/hw/cxgb3/cxio_hal.c | 6 +- drivers/infiniband/hw/cxgb4/qp.c | 5 +- drivers/infiniband/hw/hfi1/init.c | 29 ++++---- drivers/infiniband/hw/hfi1/pio.c | 9 ++- drivers/infiniband/hw/hfi1/sdma.c | 27 +++----- drivers/infiniband/hw/hns/hns_roce_alloc.c | 11 +-- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 10 +-- drivers/infiniband/hw/i40iw/i40iw_utils.c | 4 +- drivers/infiniband/hw/mthca/mthca_memfree.c | 5 +- drivers/infiniband/hw/ocrdma/ocrdma_hw.c | 14 ++-- drivers/infiniband/hw/ocrdma/ocrdma_stats.c | 4 +- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 6 +- drivers/infiniband/hw/qedr/verbs.c | 4 +- .../infiniband/hw/vmw_pvrdma/pvrdma_main.c | 4 +- drivers/input/touchscreen/raspberrypi-ts.c | 4 +- drivers/iommu/mtk_iommu_v1.c | 5 +- drivers/media/pci/intel/ipu3/ipu3-cio2.c | 4 +- .../platform/mtk-vcodec/mtk_vcodec_util.c | 2 +- drivers/misc/genwqe/card_utils.c | 4 +- drivers/mmc/host/sdhci.c | 5 +- drivers/net/ethernet/aeroflex/greth.c | 12 ++-- drivers/net/ethernet/alacritech/slicoss.c | 12 ++-- drivers/net/ethernet/amazon/ena/ena_com.c | 61 +++++++++-------- drivers/net/ethernet/apm/xgene-v2/main.c | 8 +-- drivers/net/ethernet/atheros/alx/main.c | 7 +- .../net/ethernet/atheros/atl1c/atl1c_main.c | 4 +- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 8 +-- drivers/net/ethernet/broadcom/bcmsysport.c | 4 +- drivers/net/ethernet/broadcom/bgmac.c | 12 ++-- drivers/net/ethernet/broadcom/bnx2.c | 4 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 16 ++--- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 4 +- .../net/ethernet/broadcom/bnxt/bnxt_devlink.c | 4 +- drivers/net/ethernet/broadcom/tg3.c | 22 +++--- .../ethernet/cavium/thunder/nicvf_queues.c | 2 +- drivers/net/ethernet/chelsio/cxgb3/sge.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/sge.c | 2 +- drivers/net/ethernet/chelsio/cxgb4vf/sge.c | 2 +- drivers/net/ethernet/emulex/benet/be_cmds.c | 68 +++++++++---------- .../net/ethernet/emulex/benet/be_ethtool.c | 18 ++--- drivers/net/ethernet/emulex/benet/be_main.c | 18 ++--- drivers/net/ethernet/faraday/ftgmac100.c | 14 ++-- drivers/net/ethernet/faraday/ftmac100.c | 7 +- drivers/net/ethernet/hisilicon/hix5hd2_gmac.c | 4 +- .../net/ethernet/hisilicon/hns3/hns3_enet.c | 5 +- .../hisilicon/hns3/hns3pf/hclge_cmd.c | 5 +- .../hisilicon/hns3/hns3vf/hclgevf_cmd.c | 5 +- .../ethernet/huawei/hinic/hinic_hw_api_cmd.c | 16 ++--- .../net/ethernet/huawei/hinic/hinic_hw_eqs.c | 8 +-- .../net/ethernet/huawei/hinic/hinic_hw_io.c | 6 +- .../net/ethernet/huawei/hinic/hinic_hw_qp.c | 10 +-- .../net/ethernet/huawei/hinic/hinic_hw_wq.c | 8 +-- drivers/net/ethernet/ibm/emac/mal.c | 4 +- .../net/ethernet/intel/e1000/e1000_ethtool.c | 8 +-- drivers/net/ethernet/intel/e1000e/netdev.c | 4 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +- drivers/net/ethernet/intel/ixgb/ixgb_main.c | 8 +-- .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +- drivers/net/ethernet/marvell/pxa168_eth.c | 18 ++--- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 18 ++--- drivers/net/ethernet/mellanox/mlx4/alloc.c | 8 +-- .../net/ethernet/mellanox/mlx5/core/alloc.c | 4 +- drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 10 +-- .../net/ethernet/myricom/myri10ge/myri10ge.c | 6 +- .../ethernet/netronome/nfp/nfp_net_common.c | 12 ++-- drivers/net/ethernet/ni/nixge.c | 12 ++-- .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 12 ++-- drivers/net/ethernet/pasemi/pasemi_mac.c | 6 +- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 16 ++--- .../net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 28 ++++---- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 2 +- .../net/ethernet/samsung/sxgbe/sxgbe_main.c | 12 ++-- drivers/net/ethernet/sfc/falcon/nic.c | 4 +- drivers/net/ethernet/sfc/nic.c | 4 +- drivers/net/ethernet/sgi/meth.c | 4 +- drivers/net/ethernet/socionext/netsec.c | 4 +- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 40 +++++------ drivers/net/ethernet/tundra/tsi108_eth.c | 8 +-- drivers/net/ethernet/xilinx/ll_temac_main.c | 12 ++-- .../net/ethernet/xilinx/xilinx_axienet_main.c | 12 ++-- drivers/net/fddi/defxx.c | 6 +- drivers/net/fddi/skfp/skfddi.c | 8 +-- drivers/net/vmxnet3/vmxnet3_drv.c | 8 +-- drivers/net/wan/fsl_ucc_hdlc.c | 7 +- drivers/net/wireless/ath/ath10k/ce.c | 7 +- drivers/net/wireless/ath/ath10k/mac.c | 8 +-- drivers/net/wireless/ath/ath10k/pci.c | 3 +- drivers/net/wireless/ath/ath10k/wmi.c | 2 +- drivers/net/wireless/ath/wcn36xx/dxe.c | 17 +++-- drivers/net/wireless/ath/wil6210/txrx_edma.c | 8 +-- drivers/net/wireless/broadcom/b43/dma.c | 6 +- drivers/net/wireless/broadcom/b43legacy/dma.c | 6 +- .../broadcom/brcm80211/brcmfmac/pcie.c | 16 ++--- drivers/net/wireless/intel/iwlwifi/pcie/rx.c | 39 ++++------- .../net/wireless/ralink/rt2x00/rt2x00mmio.c | 6 +- drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 8 +-- drivers/nvme/host/pci.c | 8 +-- drivers/pci/controller/pcie-iproc-msi.c | 6 +- drivers/pci/switch/switchtec.c | 8 +-- drivers/rapidio/devices/tsi721.c | 22 +++--- drivers/rapidio/devices/tsi721_dma.c | 8 +-- drivers/s390/net/ism_drv.c | 15 ++-- drivers/scsi/3w-sas.c | 5 +- drivers/scsi/a100u2w.c | 8 +-- drivers/scsi/arcmsr/arcmsr_hba.c | 18 +++-- drivers/scsi/be2iscsi/be_main.c | 4 +- drivers/scsi/be2iscsi/be_mgmt.c | 11 ++- drivers/scsi/bfa/bfad_bsg.c | 6 +- drivers/scsi/bnx2fc/bnx2fc_hwi.c | 49 +++++++------ drivers/scsi/bnx2fc/bnx2fc_tgt.c | 44 ++++++------ drivers/scsi/bnx2i/bnx2i_hwi.c | 8 +-- drivers/scsi/csiostor/csio_wr.c | 4 +- drivers/scsi/lpfc/lpfc_bsg.c | 4 +- drivers/scsi/lpfc/lpfc_init.c | 14 ++-- drivers/scsi/lpfc/lpfc_mbox.c | 6 +- drivers/scsi/lpfc/lpfc_sli.c | 15 ++-- drivers/scsi/megaraid/megaraid_mbox.c | 15 ++-- drivers/scsi/megaraid/megaraid_sas_base.c | 26 +++---- drivers/scsi/megaraid/megaraid_sas_fusion.c | 5 +- drivers/scsi/mesh.c | 5 +- drivers/scsi/mvumi.c | 9 +-- drivers/scsi/pm8001/pm8001_sas.c | 4 +- drivers/scsi/qedf/qedf_main.c | 29 ++++---- drivers/scsi/qedi/qedi_main.c | 39 ++++++----- drivers/scsi/qla2xxx/qla_attr.c | 4 +- drivers/scsi/qla2xxx/qla_bsg.c | 4 +- drivers/scsi/qla2xxx/qla_gs.c | 14 ++-- drivers/scsi/qla2xxx/qla_init.c | 8 +-- drivers/scsi/qla4xxx/ql4_init.c | 4 +- drivers/scsi/qla4xxx/ql4_mbx.c | 18 ++--- drivers/scsi/qla4xxx/ql4_nx.c | 4 +- drivers/scsi/qla4xxx/ql4_os.c | 10 +-- drivers/scsi/smartpqi/smartpqi_init.c | 32 ++++----- drivers/soc/fsl/qbman/dpaa_sys.c | 2 +- drivers/spi/spi-pic32-sqi.c | 6 +- drivers/staging/mt7621-eth/mtk_eth_soc.c | 3 +- .../interface/vchiq_arm/vchiq_2835_arm.c | 6 +- drivers/staging/vt6655/device_main.c | 19 ++---- drivers/usb/gadget/udc/bdc/bdc_core.c | 13 ++-- drivers/usb/host/uhci-hcd.c | 6 +- drivers/usb/host/xhci-mem.c | 8 +-- drivers/video/fbdev/da8xx-fb.c | 6 +- include/linux/pci-dma-compat.h | 2 +- sound/aoa/soundbus/i2sbus/core.c | 4 +- sound/sparc/dbri.c | 4 +- 173 files changed, 915 insertions(+), 949 deletions(-) diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index 982859f2b2a3..5e6a1a45cbd2 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -129,9 +129,9 @@ ltq_dma_alloc(struct ltq_dma_channel *ch) unsigned long flags; ch->desc = 0; - ch->desc_base = dma_zalloc_coherent(ch->dev, - LTQ_DESC_NUM * LTQ_DESC_SIZE, - &ch->phys, GFP_ATOMIC); + ch->desc_base = dma_alloc_coherent(ch->dev, + LTQ_DESC_NUM * LTQ_DESC_SIZE, + &ch->phys, GFP_ATOMIC); spin_lock_irqsave(<q_dma_lock, flags); ltq_dma_w32(ch->nr, LTQ_DMA_CS); diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c index d18d16489a15..bdf9b716e848 100644 --- a/arch/powerpc/platforms/pasemi/dma_lib.c +++ b/arch/powerpc/platforms/pasemi/dma_lib.c @@ -255,7 +255,7 @@ int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size) chan->ring_size = ring_size; - chan->ring_virt = dma_zalloc_coherent(&dma_pdev->dev, + chan->ring_virt = dma_alloc_coherent(&dma_pdev->dev, ring_size * sizeof(u64), &chan->ring_dma, GFP_KERNEL); diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c index 8b0ebf3940d2..ebed46f80254 100644 --- a/arch/powerpc/sysdev/fsl_rmu.c +++ b/arch/powerpc/sysdev/fsl_rmu.c @@ -756,9 +756,10 @@ fsl_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) } /* Initialize outbound message descriptor ring */ - rmu->msg_tx_ring.virt = dma_zalloc_coherent(priv->dev, - rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE, - &rmu->msg_tx_ring.phys, GFP_KERNEL); + rmu->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, + rmu->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + &rmu->msg_tx_ring.phys, + GFP_KERNEL); if (!rmu->msg_tx_ring.virt) { rc = -ENOMEM; goto out_dma; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 4dc528bf8e85..9c1247d42897 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -729,8 +729,8 @@ static int sata_fsl_port_start(struct ata_port *ap) if (!pp) return -ENOMEM; - mem = dma_zalloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma, - GFP_KERNEL); + mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); if (!mem) { kfree(pp); return -ENOMEM; diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 29f102dcfec4..2e9d1cfe3aeb 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -533,9 +533,10 @@ static void he_init_tx_lbfp(struct he_dev *he_dev) static int he_init_tpdrq(struct he_dev *he_dev) { - he_dev->tpdrq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev, - CONFIG_TPDRQ_SIZE * sizeof(struct he_tpdrq), - &he_dev->tpdrq_phys, GFP_KERNEL); + he_dev->tpdrq_base = dma_alloc_coherent(&he_dev->pci_dev->dev, + CONFIG_TPDRQ_SIZE * sizeof(struct he_tpdrq), + &he_dev->tpdrq_phys, + GFP_KERNEL); if (he_dev->tpdrq_base == NULL) { hprintk("failed to alloc tpdrq\n"); return -ENOMEM; @@ -805,9 +806,9 @@ static int he_init_group(struct he_dev *he_dev, int group) goto out_free_rbpl_virt; } - he_dev->rbpl_base = dma_zalloc_coherent(&he_dev->pci_dev->dev, - CONFIG_RBPL_SIZE * sizeof(struct he_rbp), - &he_dev->rbpl_phys, GFP_KERNEL); + he_dev->rbpl_base = dma_alloc_coherent(&he_dev->pci_dev->dev, + CONFIG_RBPL_SIZE * sizeof(struct he_rbp), + &he_dev->rbpl_phys, GFP_KERNEL); if (he_dev->rbpl_base == NULL) { hprintk("failed to alloc rbpl_base\n"); goto out_destroy_rbpl_pool; @@ -844,9 +845,9 @@ static int he_init_group(struct he_dev *he_dev, int group) /* rx buffer ready queue */ - he_dev->rbrq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev, - CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), - &he_dev->rbrq_phys, GFP_KERNEL); + he_dev->rbrq_base = dma_alloc_coherent(&he_dev->pci_dev->dev, + CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), + &he_dev->rbrq_phys, GFP_KERNEL); if (he_dev->rbrq_base == NULL) { hprintk("failed to allocate rbrq\n"); goto out_free_rbpl; @@ -868,9 +869,9 @@ static int he_init_group(struct he_dev *he_dev, int group) /* tx buffer ready queue */ - he_dev->tbrq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev, - CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), - &he_dev->tbrq_phys, GFP_KERNEL); + he_dev->tbrq_base = dma_alloc_coherent(&he_dev->pci_dev->dev, + CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), + &he_dev->tbrq_phys, GFP_KERNEL); if (he_dev->tbrq_base == NULL) { hprintk("failed to allocate tbrq\n"); goto out_free_rbpq_base; @@ -913,11 +914,9 @@ static int he_init_irq(struct he_dev *he_dev) /* 2.9.3.5 tail offset for each interrupt queue is located after the end of the interrupt queue */ - he_dev->irq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev, - (CONFIG_IRQ_SIZE + 1) - * sizeof(struct he_irq), - &he_dev->irq_phys, - GFP_KERNEL); + he_dev->irq_base = dma_alloc_coherent(&he_dev->pci_dev->dev, + (CONFIG_IRQ_SIZE + 1) * sizeof(struct he_irq), + &he_dev->irq_phys, GFP_KERNEL); if (he_dev->irq_base == NULL) { hprintk("failed to allocate irq\n"); return -ENOMEM; @@ -1464,9 +1463,9 @@ static int he_start(struct atm_dev *dev) /* host status page */ - he_dev->hsp = dma_zalloc_coherent(&he_dev->pci_dev->dev, - sizeof(struct he_hsp), - &he_dev->hsp_phys, GFP_KERNEL); + he_dev->hsp = dma_alloc_coherent(&he_dev->pci_dev->dev, + sizeof(struct he_hsp), + &he_dev->hsp_phys, GFP_KERNEL); if (he_dev->hsp == NULL) { hprintk("failed to allocate host status page\n"); return -ENOMEM; diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index 6e737142ceaa..43a14579e80e 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -641,8 +641,8 @@ alloc_scq(struct idt77252_dev *card, int class) scq = kzalloc(sizeof(struct scq_info), GFP_KERNEL); if (!scq) return NULL; - scq->base = dma_zalloc_coherent(&card->pcidev->dev, SCQ_SIZE, - &scq->paddr, GFP_KERNEL); + scq->base = dma_alloc_coherent(&card->pcidev->dev, SCQ_SIZE, + &scq->paddr, GFP_KERNEL); if (scq->base == NULL) { kfree(scq); return NULL; @@ -971,8 +971,8 @@ init_rsq(struct idt77252_dev *card) { struct rsq_entry *rsqe; - card->rsq.base = dma_zalloc_coherent(&card->pcidev->dev, RSQSIZE, - &card->rsq.paddr, GFP_KERNEL); + card->rsq.base = dma_alloc_coherent(&card->pcidev->dev, RSQSIZE, + &card->rsq.paddr, GFP_KERNEL); if (card->rsq.base == NULL) { printk("%s: can't allocate RSQ.\n", card->name); return -1; @@ -3390,10 +3390,10 @@ static int init_card(struct atm_dev *dev) writel(0, SAR_REG_GP); /* Initialize RAW Cell Handle Register */ - card->raw_cell_hnd = dma_zalloc_coherent(&card->pcidev->dev, - 2 * sizeof(u32), - &card->raw_cell_paddr, - GFP_KERNEL); + card->raw_cell_hnd = dma_alloc_coherent(&card->pcidev->dev, + 2 * sizeof(u32), + &card->raw_cell_paddr, + GFP_KERNEL); if (!card->raw_cell_hnd) { printk("%s: memory allocation failure.\n", card->name); deinit_card(card); diff --git a/drivers/block/skd_main.c b/drivers/block/skd_main.c index a10d5736d8f7..ab893a7571a2 100644 --- a/drivers/block/skd_main.c +++ b/drivers/block/skd_main.c @@ -2641,8 +2641,8 @@ static int skd_cons_skcomp(struct skd_device *skdev) "comp pci_alloc, total bytes %zd entries %d\n", SKD_SKCOMP_SIZE, SKD_N_COMPLETION_ENTRY); - skcomp = dma_zalloc_coherent(&skdev->pdev->dev, SKD_SKCOMP_SIZE, - &skdev->cq_dma_address, GFP_KERNEL); + skcomp = dma_alloc_coherent(&skdev->pdev->dev, SKD_SKCOMP_SIZE, + &skdev->cq_dma_address, GFP_KERNEL); if (skcomp == NULL) { rc = -ENOMEM; diff --git a/drivers/crypto/amcc/crypto4xx_core.c b/drivers/crypto/amcc/crypto4xx_core.c index 63cb6956c948..acf79889d903 100644 --- a/drivers/crypto/amcc/crypto4xx_core.c +++ b/drivers/crypto/amcc/crypto4xx_core.c @@ -283,9 +283,9 @@ static u32 crypto4xx_put_pd_to_pdr(struct crypto4xx_device *dev, u32 idx) */ static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev) { - dev->gdr = dma_zalloc_coherent(dev->core_dev->device, - sizeof(struct ce_gd) * PPC4XX_NUM_GD, - &dev->gdr_pa, GFP_ATOMIC); + dev->gdr = dma_alloc_coherent(dev->core_dev->device, + sizeof(struct ce_gd) * PPC4XX_NUM_GD, + &dev->gdr_pa, GFP_ATOMIC); if (!dev->gdr) return -ENOMEM; diff --git a/drivers/crypto/cavium/cpt/cptpf_main.c b/drivers/crypto/cavium/cpt/cptpf_main.c index 06ad85ab5e86..a876535529d1 100644 --- a/drivers/crypto/cavium/cpt/cptpf_main.c +++ b/drivers/crypto/cavium/cpt/cptpf_main.c @@ -278,8 +278,8 @@ static int cpt_ucode_load_fw(struct cpt_device *cpt, const u8 *fw, bool is_ae) mcode->num_cores = is_ae ? 6 : 10; /* Allocate DMAable space */ - mcode->code = dma_zalloc_coherent(&cpt->pdev->dev, mcode->code_size, - &mcode->phys_base, GFP_KERNEL); + mcode->code = dma_alloc_coherent(&cpt->pdev->dev, mcode->code_size, + &mcode->phys_base, GFP_KERNEL); if (!mcode->code) { dev_err(dev, "Unable to allocate space for microcode"); ret = -ENOMEM; diff --git a/drivers/crypto/cavium/cpt/cptvf_main.c b/drivers/crypto/cavium/cpt/cptvf_main.c index 5c796ed55eba..2ca431ed1db8 100644 --- a/drivers/crypto/cavium/cpt/cptvf_main.c +++ b/drivers/crypto/cavium/cpt/cptvf_main.c @@ -236,9 +236,10 @@ static int alloc_command_queues(struct cpt_vf *cptvf, c_size = (rem_q_size > qcsize_bytes) ? qcsize_bytes : rem_q_size; - curr->head = (u8 *)dma_zalloc_coherent(&pdev->dev, - c_size + CPT_NEXT_CHUNK_PTR_SIZE, - &curr->dma_addr, GFP_KERNEL); + curr->head = (u8 *)dma_alloc_coherent(&pdev->dev, + c_size + CPT_NEXT_CHUNK_PTR_SIZE, + &curr->dma_addr, + GFP_KERNEL); if (!curr->head) { dev_err(&pdev->dev, "Command Q (%d) chunk (%d) allocation failed\n", i, queue->nchunks); diff --git a/drivers/crypto/cavium/nitrox/nitrox_lib.c b/drivers/crypto/cavium/nitrox/nitrox_lib.c index 9138bae12521..4ace9bcd603a 100644 --- a/drivers/crypto/cavium/nitrox/nitrox_lib.c +++ b/drivers/crypto/cavium/nitrox/nitrox_lib.c @@ -25,9 +25,9 @@ static int nitrox_cmdq_init(struct nitrox_cmdq *cmdq, int align_bytes) struct nitrox_device *ndev = cmdq->ndev; cmdq->qsize = (ndev->qlen * cmdq->instr_size) + align_bytes; - cmdq->unalign_base = dma_zalloc_coherent(DEV(ndev), cmdq->qsize, - &cmdq->unalign_dma, - GFP_KERNEL); + cmdq->unalign_base = dma_alloc_coherent(DEV(ndev), cmdq->qsize, + &cmdq->unalign_dma, + GFP_KERNEL); if (!cmdq->unalign_base) return -ENOMEM; diff --git a/drivers/crypto/ccp/ccp-dev-v5.c b/drivers/crypto/ccp/ccp-dev-v5.c index 44a4d2779b15..c9bfd4f439ce 100644 --- a/drivers/crypto/ccp/ccp-dev-v5.c +++ b/drivers/crypto/ccp/ccp-dev-v5.c @@ -822,9 +822,9 @@ static int ccp5_init(struct ccp_device *ccp) /* Page alignment satisfies our needs for N <= 128 */ BUILD_BUG_ON(COMMANDS_PER_QUEUE > 128); cmd_q->qsize = Q_SIZE(Q_DESC_SIZE); - cmd_q->qbase = dma_zalloc_coherent(dev, cmd_q->qsize, - &cmd_q->qbase_dma, - GFP_KERNEL); + cmd_q->qbase = dma_alloc_coherent(dev, cmd_q->qsize, + &cmd_q->qbase_dma, + GFP_KERNEL); if (!cmd_q->qbase) { dev_err(dev, "unable to allocate command queue\n"); ret = -ENOMEM; diff --git a/drivers/crypto/hisilicon/sec/sec_algs.c b/drivers/crypto/hisilicon/sec/sec_algs.c index cdc4f9a171d9..adc0cd8ae97b 100644 --- a/drivers/crypto/hisilicon/sec/sec_algs.c +++ b/drivers/crypto/hisilicon/sec/sec_algs.c @@ -241,8 +241,8 @@ static int sec_alg_skcipher_setkey(struct crypto_skcipher *tfm, memset(ctx->key, 0, SEC_MAX_CIPHER_KEY); } else { /* new key */ - ctx->key = dma_zalloc_coherent(dev, SEC_MAX_CIPHER_KEY, - &ctx->pkey, GFP_KERNEL); + ctx->key = dma_alloc_coherent(dev, SEC_MAX_CIPHER_KEY, + &ctx->pkey, GFP_KERNEL); if (!ctx->key) { mutex_unlock(&ctx->lock); return -ENOMEM; diff --git a/drivers/crypto/hisilicon/sec/sec_drv.c b/drivers/crypto/hisilicon/sec/sec_drv.c index c1ee4e7bf996..91ee2bb575df 100644 --- a/drivers/crypto/hisilicon/sec/sec_drv.c +++ b/drivers/crypto/hisilicon/sec/sec_drv.c @@ -1082,9 +1082,8 @@ static int sec_queue_res_cfg(struct sec_queue *queue) struct sec_queue_ring_db *ring_db = &queue->ring_db; int ret; - ring_cmd->vaddr = dma_zalloc_coherent(dev, SEC_Q_CMD_SIZE, - &ring_cmd->paddr, - GFP_KERNEL); + ring_cmd->vaddr = dma_alloc_coherent(dev, SEC_Q_CMD_SIZE, + &ring_cmd->paddr, GFP_KERNEL); if (!ring_cmd->vaddr) return -ENOMEM; @@ -1092,17 +1091,15 @@ static int sec_queue_res_cfg(struct sec_queue *queue) mutex_init(&ring_cmd->lock); ring_cmd->callback = sec_alg_callback; - ring_cq->vaddr = dma_zalloc_coherent(dev, SEC_Q_CQ_SIZE, - &ring_cq->paddr, - GFP_KERNEL); + ring_cq->vaddr = dma_alloc_coherent(dev, SEC_Q_CQ_SIZE, + &ring_cq->paddr, GFP_KERNEL); if (!ring_cq->vaddr) { ret = -ENOMEM; goto err_free_ring_cmd; } - ring_db->vaddr = dma_zalloc_coherent(dev, SEC_Q_DB_SIZE, - &ring_db->paddr, - GFP_KERNEL); + ring_db->vaddr = dma_alloc_coherent(dev, SEC_Q_DB_SIZE, + &ring_db->paddr, GFP_KERNEL); if (!ring_db->vaddr) { ret = -ENOMEM; goto err_free_ring_cq; diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 19fba998b86b..1b0d156bb9be 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -260,9 +260,9 @@ static int setup_crypt_desc(void) { struct device *dev = &pdev->dev; BUILD_BUG_ON(sizeof(struct crypt_ctl) != 64); - crypt_virt = dma_zalloc_coherent(dev, - NPE_QLEN * sizeof(struct crypt_ctl), - &crypt_phys, GFP_ATOMIC); + crypt_virt = dma_alloc_coherent(dev, + NPE_QLEN * sizeof(struct crypt_ctl), + &crypt_phys, GFP_ATOMIC); if (!crypt_virt) return -ENOMEM; return 0; diff --git a/drivers/crypto/mediatek/mtk-platform.c b/drivers/crypto/mediatek/mtk-platform.c index ee0404e27a0f..5660e5e5e022 100644 --- a/drivers/crypto/mediatek/mtk-platform.c +++ b/drivers/crypto/mediatek/mtk-platform.c @@ -453,17 +453,17 @@ static int mtk_desc_ring_alloc(struct mtk_cryp *cryp) if (!ring[i]) goto err_cleanup; - ring[i]->cmd_base = dma_zalloc_coherent(cryp->dev, - MTK_DESC_RING_SZ, - &ring[i]->cmd_dma, - GFP_KERNEL); + ring[i]->cmd_base = dma_alloc_coherent(cryp->dev, + MTK_DESC_RING_SZ, + &ring[i]->cmd_dma, + GFP_KERNEL); if (!ring[i]->cmd_base) goto err_cleanup; - ring[i]->res_base = dma_zalloc_coherent(cryp->dev, - MTK_DESC_RING_SZ, - &ring[i]->res_dma, - GFP_KERNEL); + ring[i]->res_base = dma_alloc_coherent(cryp->dev, + MTK_DESC_RING_SZ, + &ring[i]->res_dma, + GFP_KERNEL); if (!ring[i]->res_base) goto err_cleanup; diff --git a/drivers/crypto/qat/qat_common/adf_admin.c b/drivers/crypto/qat/qat_common/adf_admin.c index 3744b22f0c46..d28cba34773e 100644 --- a/drivers/crypto/qat/qat_common/adf_admin.c +++ b/drivers/crypto/qat/qat_common/adf_admin.c @@ -244,18 +244,18 @@ int adf_init_admin_comms(struct adf_accel_dev *accel_dev) dev_to_node(&GET_DEV(accel_dev))); if (!admin) return -ENOMEM; - admin->virt_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE, - &admin->phy_addr, GFP_KERNEL); + admin->virt_addr = dma_alloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE, + &admin->phy_addr, GFP_KERNEL); if (!admin->virt_addr) { dev_err(&GET_DEV(accel_dev), "Failed to allocate dma buff\n"); kfree(admin); return -ENOMEM; } - admin->virt_tbl_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), - PAGE_SIZE, - &admin->const_tbl_addr, - GFP_KERNEL); + admin->virt_tbl_addr = dma_alloc_coherent(&GET_DEV(accel_dev), + PAGE_SIZE, + &admin->const_tbl_addr, + GFP_KERNEL); if (!admin->virt_tbl_addr) { dev_err(&GET_DEV(accel_dev), "Failed to allocate const_tbl\n"); dma_free_coherent(&GET_DEV(accel_dev), PAGE_SIZE, diff --git a/drivers/crypto/qat/qat_common/qat_algs.c b/drivers/crypto/qat/qat_common/qat_algs.c index d2698299896f..975c75198f56 100644 --- a/drivers/crypto/qat/qat_common/qat_algs.c +++ b/drivers/crypto/qat/qat_common/qat_algs.c @@ -601,15 +601,15 @@ static int qat_alg_aead_setkey(struct crypto_aead *tfm, const uint8_t *key, dev = &GET_DEV(inst->accel_dev); ctx->inst = inst; - ctx->enc_cd = dma_zalloc_coherent(dev, sizeof(*ctx->enc_cd), - &ctx->enc_cd_paddr, - GFP_ATOMIC); + ctx->enc_cd = dma_alloc_coherent(dev, sizeof(*ctx->enc_cd), + &ctx->enc_cd_paddr, + GFP_ATOMIC); if (!ctx->enc_cd) { return -ENOMEM; } - ctx->dec_cd = dma_zalloc_coherent(dev, sizeof(*ctx->dec_cd), - &ctx->dec_cd_paddr, - GFP_ATOMIC); + ctx->dec_cd = dma_alloc_coherent(dev, sizeof(*ctx->dec_cd), + &ctx->dec_cd_paddr, + GFP_ATOMIC); if (!ctx->dec_cd) { goto out_free_enc; } @@ -933,16 +933,16 @@ static int qat_alg_ablkcipher_setkey(struct crypto_ablkcipher *tfm, dev = &GET_DEV(inst->accel_dev); ctx->inst = inst; - ctx->enc_cd = dma_zalloc_coherent(dev, sizeof(*ctx->enc_cd), - &ctx->enc_cd_paddr, - GFP_ATOMIC); + ctx->enc_cd = dma_alloc_coherent(dev, sizeof(*ctx->enc_cd), + &ctx->enc_cd_paddr, + GFP_ATOMIC); if (!ctx->enc_cd) { spin_unlock(&ctx->lock); return -ENOMEM; } - ctx->dec_cd = dma_zalloc_coherent(dev, sizeof(*ctx->dec_cd), - &ctx->dec_cd_paddr, - GFP_ATOMIC); + ctx->dec_cd = dma_alloc_coherent(dev, sizeof(*ctx->dec_cd), + &ctx->dec_cd_paddr, + GFP_ATOMIC); if (!ctx->dec_cd) { spin_unlock(&ctx->lock); goto out_free_enc; diff --git a/drivers/crypto/qat/qat_common/qat_asym_algs.c b/drivers/crypto/qat/qat_common/qat_asym_algs.c index 320e7854b4ee..c9f324730d71 100644 --- a/drivers/crypto/qat/qat_common/qat_asym_algs.c +++ b/drivers/crypto/qat/qat_common/qat_asym_algs.c @@ -332,10 +332,10 @@ static int qat_dh_compute_value(struct kpp_request *req) } else { int shift = ctx->p_size - req->src_len; - qat_req->src_align = dma_zalloc_coherent(dev, - ctx->p_size, - &qat_req->in.dh.in.b, - GFP_KERNEL); + qat_req->src_align = dma_alloc_coherent(dev, + ctx->p_size, + &qat_req->in.dh.in.b, + GFP_KERNEL); if (unlikely(!qat_req->src_align)) return ret; @@ -360,9 +360,9 @@ static int qat_dh_compute_value(struct kpp_request *req) goto unmap_src; } else { - qat_req->dst_align = dma_zalloc_coherent(dev, ctx->p_size, - &qat_req->out.dh.r, - GFP_KERNEL); + qat_req->dst_align = dma_alloc_coherent(dev, ctx->p_size, + &qat_req->out.dh.r, + GFP_KERNEL); if (unlikely(!qat_req->dst_align)) goto unmap_src; } @@ -447,7 +447,7 @@ static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params) return -EINVAL; ctx->p_size = params->p_size; - ctx->p = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_p, GFP_KERNEL); + ctx->p = dma_alloc_coherent(dev, ctx->p_size, &ctx->dma_p, GFP_KERNEL); if (!ctx->p) return -ENOMEM; memcpy(ctx->p, params->p, ctx->p_size); @@ -458,7 +458,7 @@ static int qat_dh_set_params(struct qat_dh_ctx *ctx, struct dh *params) return 0; } - ctx->g = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_g, GFP_KERNEL); + ctx->g = dma_alloc_coherent(dev, ctx->p_size, &ctx->dma_g, GFP_KERNEL); if (!ctx->g) return -ENOMEM; memcpy(ctx->g + (ctx->p_size - params->g_size), params->g, @@ -503,8 +503,8 @@ static int qat_dh_set_secret(struct crypto_kpp *tfm, const void *buf, if (ret < 0) goto err_clear_ctx; - ctx->xa = dma_zalloc_coherent(dev, ctx->p_size, &ctx->dma_xa, - GFP_KERNEL); + ctx->xa = dma_alloc_coherent(dev, ctx->p_size, &ctx->dma_xa, + GFP_KERNEL); if (!ctx->xa) { ret = -ENOMEM; goto err_clear_ctx; @@ -737,9 +737,9 @@ static int qat_rsa_enc(struct akcipher_request *req) } else { int shift = ctx->key_sz - req->src_len; - qat_req->src_align = dma_zalloc_coherent(dev, ctx->key_sz, - &qat_req->in.rsa.enc.m, - GFP_KERNEL); + qat_req->src_align = dma_alloc_coherent(dev, ctx->key_sz, + &qat_req->in.rsa.enc.m, + GFP_KERNEL); if (unlikely(!qat_req->src_align)) return ret; @@ -756,9 +756,9 @@ static int qat_rsa_enc(struct akcipher_request *req) goto unmap_src; } else { - qat_req->dst_align = dma_zalloc_coherent(dev, ctx->key_sz, - &qat_req->out.rsa.enc.c, - GFP_KERNEL); + qat_req->dst_align = dma_alloc_coherent(dev, ctx->key_sz, + &qat_req->out.rsa.enc.c, + GFP_KERNEL); if (unlikely(!qat_req->dst_align)) goto unmap_src; @@ -881,9 +881,9 @@ static int qat_rsa_dec(struct akcipher_request *req) } else { int shift = ctx->key_sz - req->src_len; - qat_req->src_align = dma_zalloc_coherent(dev, ctx->key_sz, - &qat_req->in.rsa.dec.c, - GFP_KERNEL); + qat_req->src_align = dma_alloc_coherent(dev, ctx->key_sz, + &qat_req->in.rsa.dec.c, + GFP_KERNEL); if (unlikely(!qat_req->src_align)) return ret; @@ -900,9 +900,9 @@ static int qat_rsa_dec(struct akcipher_request *req) goto unmap_src; } else { - qat_req->dst_align = dma_zalloc_coherent(dev, ctx->key_sz, - &qat_req->out.rsa.dec.m, - GFP_KERNEL); + qat_req->dst_align = dma_alloc_coherent(dev, ctx->key_sz, + &qat_req->out.rsa.dec.m, + GFP_KERNEL); if (unlikely(!qat_req->dst_align)) goto unmap_src; @@ -989,7 +989,7 @@ static int qat_rsa_set_n(struct qat_rsa_ctx *ctx, const char *value, goto err; ret = -ENOMEM; - ctx->n = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_n, GFP_KERNEL); + ctx->n = dma_alloc_coherent(dev, ctx->key_sz, &ctx->dma_n, GFP_KERNEL); if (!ctx->n) goto err; @@ -1018,7 +1018,7 @@ static int qat_rsa_set_e(struct qat_rsa_ctx *ctx, const char *value, return -EINVAL; } - ctx->e = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_e, GFP_KERNEL); + ctx->e = dma_alloc_coherent(dev, ctx->key_sz, &ctx->dma_e, GFP_KERNEL); if (!ctx->e) return -ENOMEM; @@ -1044,7 +1044,7 @@ static int qat_rsa_set_d(struct qat_rsa_ctx *ctx, const char *value, goto err; ret = -ENOMEM; - ctx->d = dma_zalloc_coherent(dev, ctx->key_sz, &ctx->dma_d, GFP_KERNEL); + ctx->d = dma_alloc_coherent(dev, ctx->key_sz, &ctx->dma_d, GFP_KERNEL); if (!ctx->d) goto err; @@ -1077,7 +1077,7 @@ static void qat_rsa_setkey_crt(struct qat_rsa_ctx *ctx, struct rsa_key *rsa_key) qat_rsa_drop_leading_zeros(&ptr, &len); if (!len) goto err; - ctx->p = dma_zalloc_coherent(dev, half_key_sz, &ctx->dma_p, GFP_KERNEL); + ctx->p = dma_alloc_coherent(dev, half_key_sz, &ctx->dma_p, GFP_KERNEL); if (!ctx->p) goto err; memcpy(ctx->p + (half_key_sz - len), ptr, len); @@ -1088,7 +1088,7 @@ static void qat_rsa_setkey_crt(struct qat_rsa_ctx *ctx, struct rsa_key *rsa_key) qat_rsa_drop_leading_zeros(&ptr, &len); if (!len) goto free_p; - ctx->q = dma_zalloc_coherent(dev, half_key_sz, &ctx->dma_q, GFP_KERNEL); + ctx->q = dma_alloc_coherent(dev, half_key_sz, &ctx->dma_q, GFP_KERNEL); if (!ctx->q) goto free_p; memcpy(ctx->q + (half_key_sz - len), ptr, len); @@ -1099,8 +1099,8 @@ static void qat_rsa_setkey_crt(struct qat_rsa_ctx *ctx, struct rsa_key *rsa_key) qat_rsa_drop_leading_zeros(&ptr, &len); if (!len) goto free_q; - ctx->dp = dma_zalloc_coherent(dev, half_key_sz, &ctx->dma_dp, - GFP_KERNEL); + ctx->dp = dma_alloc_coherent(dev, half_key_sz, &ctx->dma_dp, + GFP_KERNEL); if (!ctx->dp) goto free_q; memcpy(ctx->dp + (half_key_sz - len), ptr, len); @@ -1111,8 +1111,8 @@ static void qat_rsa_setkey_crt(struct qat_rsa_ctx *ctx, struct rsa_key *rsa_key) qat_rsa_drop_leading_zeros(&ptr, &len); if (!len) goto free_dp; - ctx->dq = dma_zalloc_coherent(dev, half_key_sz, &ctx->dma_dq, - GFP_KERNEL); + ctx->dq = dma_alloc_coherent(dev, half_key_sz, &ctx->dma_dq, + GFP_KERNEL); if (!ctx->dq) goto free_dp; memcpy(ctx->dq + (half_key_sz - len), ptr, len); @@ -1123,8 +1123,8 @@ static void qat_rsa_setkey_crt(struct qat_rsa_ctx *ctx, struct rsa_key *rsa_key) qat_rsa_drop_leading_zeros(&ptr, &len); if (!len) goto free_dq; - ctx->qinv = dma_zalloc_coherent(dev, half_key_sz, &ctx->dma_qinv, - GFP_KERNEL); + ctx->qinv = dma_alloc_coherent(dev, half_key_sz, &ctx->dma_qinv, + GFP_KERNEL); if (!ctx->qinv) goto free_dq; memcpy(ctx->qinv + (half_key_sz - len), ptr, len); diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index a2b0a0e71168..86708fb9bda1 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -1182,8 +1182,8 @@ static int sdma_request_channel0(struct sdma_engine *sdma) { int ret = -EBUSY; - sdma->bd0 = dma_zalloc_coherent(NULL, PAGE_SIZE, &sdma->bd0_phys, - GFP_NOWAIT); + sdma->bd0 = dma_alloc_coherent(NULL, PAGE_SIZE, &sdma->bd0_phys, + GFP_NOWAIT); if (!sdma->bd0) { ret = -ENOMEM; goto out; @@ -1205,8 +1205,8 @@ static int sdma_alloc_bd(struct sdma_desc *desc) u32 bd_size = desc->num_bd * sizeof(struct sdma_buffer_descriptor); int ret = 0; - desc->bd = dma_zalloc_coherent(NULL, bd_size, &desc->bd_phys, - GFP_NOWAIT); + desc->bd = dma_alloc_coherent(NULL, bd_size, &desc->bd_phys, + GFP_NOWAIT); if (!desc->bd) { ret = -ENOMEM; goto out; diff --git a/drivers/dma/mediatek/mtk-hsdma.c b/drivers/dma/mediatek/mtk-hsdma.c index b7ec56ae02a6..1a2028e1c29e 100644 --- a/drivers/dma/mediatek/mtk-hsdma.c +++ b/drivers/dma/mediatek/mtk-hsdma.c @@ -325,8 +325,8 @@ static int mtk_hsdma_alloc_pchan(struct mtk_hsdma_device *hsdma, * and [MTK_DMA_SIZE ... 2 * MTK_DMA_SIZE - 1] is for RX ring. */ pc->sz_ring = 2 * MTK_DMA_SIZE * sizeof(*ring->txd); - ring->txd = dma_zalloc_coherent(hsdma2dev(hsdma), pc->sz_ring, - &ring->tphys, GFP_NOWAIT); + ring->txd = dma_alloc_coherent(hsdma2dev(hsdma), pc->sz_ring, + &ring->tphys, GFP_NOWAIT); if (!ring->txd) return -ENOMEM; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 35193b31a9e0..22cc7f68ef6e 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -416,9 +416,9 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan) struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int ret; - mxs_chan->ccw = dma_zalloc_coherent(mxs_dma->dma_device.dev, - CCW_BLOCK_SIZE, - &mxs_chan->ccw_phys, GFP_KERNEL); + mxs_chan->ccw = dma_alloc_coherent(mxs_dma->dma_device.dev, + CCW_BLOCK_SIZE, + &mxs_chan->ccw_phys, GFP_KERNEL); if (!mxs_chan->ccw) { ret = -ENOMEM; goto err_alloc; diff --git a/drivers/dma/xgene-dma.c b/drivers/dma/xgene-dma.c index 1d5988849aa6..eafd6c4b90fe 100644 --- a/drivers/dma/xgene-dma.c +++ b/drivers/dma/xgene-dma.c @@ -1208,8 +1208,8 @@ static int xgene_dma_create_ring_one(struct xgene_dma_chan *chan, ring->size = ret; /* Allocate memory for DMA ring descriptor */ - ring->desc_vaddr = dma_zalloc_coherent(chan->dev, ring->size, - &ring->desc_paddr, GFP_KERNEL); + ring->desc_vaddr = dma_alloc_coherent(chan->dev, ring->size, + &ring->desc_paddr, GFP_KERNEL); if (!ring->desc_vaddr) { chan_err(chan, "Failed to allocate ring desc\n"); return -ENOMEM; diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c index 02880963092f..cb20b411493e 100644 --- a/drivers/dma/xilinx/xilinx_dma.c +++ b/drivers/dma/xilinx/xilinx_dma.c @@ -879,10 +879,9 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan) */ if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) { /* Allocate the buffer descriptors. */ - chan->seg_v = dma_zalloc_coherent(chan->dev, - sizeof(*chan->seg_v) * - XILINX_DMA_NUM_DESCS, - &chan->seg_p, GFP_KERNEL); + chan->seg_v = dma_alloc_coherent(chan->dev, + sizeof(*chan->seg_v) * XILINX_DMA_NUM_DESCS, + &chan->seg_p, GFP_KERNEL); if (!chan->seg_v) { dev_err(chan->dev, "unable to allocate channel %d descriptors\n", @@ -895,9 +894,10 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan) * so allocating a desc segment during channel allocation for * programming tail descriptor. */ - chan->cyclic_seg_v = dma_zalloc_coherent(chan->dev, - sizeof(*chan->cyclic_seg_v), - &chan->cyclic_seg_p, GFP_KERNEL); + chan->cyclic_seg_v = dma_alloc_coherent(chan->dev, + sizeof(*chan->cyclic_seg_v), + &chan->cyclic_seg_p, + GFP_KERNEL); if (!chan->cyclic_seg_v) { dev_err(chan->dev, "unable to allocate desc segment for cyclic DMA\n"); diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c index 8db51750ce93..4478787a247f 100644 --- a/drivers/dma/xilinx/zynqmp_dma.c +++ b/drivers/dma/xilinx/zynqmp_dma.c @@ -490,9 +490,9 @@ static int zynqmp_dma_alloc_chan_resources(struct dma_chan *dchan) list_add_tail(&desc->node, &chan->free_list); } - chan->desc_pool_v = dma_zalloc_coherent(chan->dev, - (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS), - &chan->desc_pool_p, GFP_KERNEL); + chan->desc_pool_v = dma_alloc_coherent(chan->dev, + (2 * chan->desc_size * ZYNQMP_DMA_NUM_DESCS), + &chan->desc_pool_p, GFP_KERNEL); if (!chan->desc_pool_v) return -ENOMEM; diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c index a9d9df6c85ad..693748ad8b88 100644 --- a/drivers/gpu/drm/drm_pci.c +++ b/drivers/gpu/drm/drm_pci.c @@ -61,8 +61,9 @@ drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t ali return NULL; dmah->size = size; - dmah->vaddr = dma_zalloc_coherent(&dev->pdev->dev, size, &dmah->busaddr, - GFP_KERNEL | __GFP_COMP); + dmah->vaddr = dma_alloc_coherent(&dev->pdev->dev, size, + &dmah->busaddr, + GFP_KERNEL | __GFP_COMP); if (dmah->vaddr == NULL) { kfree(dmah); diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c index 326805461265..19551aa43850 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c @@ -766,8 +766,8 @@ struct bnxt_qplib_rcfw_sbuf *bnxt_qplib_rcfw_alloc_sbuf( return NULL; sbuf->size = size; - sbuf->sb = dma_zalloc_coherent(&rcfw->pdev->dev, sbuf->size, - &sbuf->dma_addr, GFP_ATOMIC); + sbuf->sb = dma_alloc_coherent(&rcfw->pdev->dev, sbuf->size, + &sbuf->dma_addr, GFP_ATOMIC); if (!sbuf->sb) goto bail; diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.c b/drivers/infiniband/hw/bnxt_re/qplib_res.c index 59eeac55626f..57d4951679cb 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_res.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_res.c @@ -105,10 +105,10 @@ static int __alloc_pbl(struct pci_dev *pdev, struct bnxt_qplib_pbl *pbl, if (!sghead) { for (i = 0; i < pages; i++) { - pbl->pg_arr[i] = dma_zalloc_coherent(&pdev->dev, - pbl->pg_size, - &pbl->pg_map_arr[i], - GFP_KERNEL); + pbl->pg_arr[i] = dma_alloc_coherent(&pdev->dev, + pbl->pg_size, + &pbl->pg_map_arr[i], + GFP_KERNEL); if (!pbl->pg_arr[i]) goto fail; pbl->pg_count++; diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index df4f7a3f043d..8ac72ac7cbac 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -291,9 +291,9 @@ int cxio_create_qp(struct cxio_rdev *rdev_p, u32 kernel_domain, if (!wq->sq) goto err3; - wq->queue = dma_zalloc_coherent(&(rdev_p->rnic_info.pdev->dev), - depth * sizeof(union t3_wr), - &(wq->dma_addr), GFP_KERNEL); + wq->queue = dma_alloc_coherent(&(rdev_p->rnic_info.pdev->dev), + depth * sizeof(union t3_wr), + &(wq->dma_addr), GFP_KERNEL); if (!wq->queue) goto err4; diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 981ff5cfb5d1..504cf525508f 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -2564,9 +2564,8 @@ static int alloc_srq_queue(struct c4iw_srq *srq, struct c4iw_dev_ucontext *uctx, wq->rqt_abs_idx = (wq->rqt_hwaddr - rdev->lldi.vr->rq.start) >> T4_RQT_ENTRY_SHIFT; - wq->queue = dma_zalloc_coherent(&rdev->lldi.pdev->dev, - wq->memsize, &wq->dma_addr, - GFP_KERNEL); + wq->queue = dma_alloc_coherent(&rdev->lldi.pdev->dev, wq->memsize, + &wq->dma_addr, GFP_KERNEL); if (!wq->queue) goto err_free_rqtpool; diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 09044905284f..7835eb52e7c5 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -899,10 +899,10 @@ int hfi1_init(struct hfi1_devdata *dd, int reinit) goto done; /* allocate dummy tail memory for all receive contexts */ - dd->rcvhdrtail_dummy_kvaddr = dma_zalloc_coherent( - &dd->pcidev->dev, sizeof(u64), - &dd->rcvhdrtail_dummy_dma, - GFP_KERNEL); + dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, + sizeof(u64), + &dd->rcvhdrtail_dummy_dma, + GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); @@ -1863,9 +1863,9 @@ int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd) gfp_flags = GFP_KERNEL; else gfp_flags = GFP_USER; - rcd->rcvhdrq = dma_zalloc_coherent( - &dd->pcidev->dev, amt, &rcd->rcvhdrq_dma, - gfp_flags | __GFP_COMP); + rcd->rcvhdrq = dma_alloc_coherent(&dd->pcidev->dev, amt, + &rcd->rcvhdrq_dma, + gfp_flags | __GFP_COMP); if (!rcd->rcvhdrq) { dd_dev_err(dd, @@ -1876,9 +1876,10 @@ int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd) if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL) || HFI1_CAP_UGET_MASK(rcd->flags, DMA_RTAIL)) { - rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent( - &dd->pcidev->dev, PAGE_SIZE, - &rcd->rcvhdrqtailaddr_dma, gfp_flags); + rcd->rcvhdrtail_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, + PAGE_SIZE, + &rcd->rcvhdrqtailaddr_dma, + gfp_flags); if (!rcd->rcvhdrtail_kvaddr) goto bail_free; } @@ -1974,10 +1975,10 @@ int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd) while (alloced_bytes < rcd->egrbufs.size && rcd->egrbufs.alloced < rcd->egrbufs.count) { rcd->egrbufs.buffers[idx].addr = - dma_zalloc_coherent(&dd->pcidev->dev, - rcd->egrbufs.rcvtid_size, - &rcd->egrbufs.buffers[idx].dma, - gfp_flags); + dma_alloc_coherent(&dd->pcidev->dev, + rcd->egrbufs.rcvtid_size, + &rcd->egrbufs.buffers[idx].dma, + gfp_flags); if (rcd->egrbufs.buffers[idx].addr) { rcd->egrbufs.buffers[idx].len = rcd->egrbufs.rcvtid_size; diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index dd5a5c030066..04126d7e318d 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -2098,11 +2098,10 @@ int init_credit_return(struct hfi1_devdata *dd) int bytes = TXE_NUM_CONTEXTS * sizeof(struct credit_return); set_dev_node(&dd->pcidev->dev, i); - dd->cr_base[i].va = dma_zalloc_coherent( - &dd->pcidev->dev, - bytes, - &dd->cr_base[i].dma, - GFP_KERNEL); + dd->cr_base[i].va = dma_alloc_coherent(&dd->pcidev->dev, + bytes, + &dd->cr_base[i].dma, + GFP_KERNEL); if (!dd->cr_base[i].va) { set_dev_node(&dd->pcidev->dev, dd->node); dd_dev_err(dd, diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c index b84356e1a4c1..96897a91fb0a 100644 --- a/drivers/infiniband/hw/hfi1/sdma.c +++ b/drivers/infiniband/hw/hfi1/sdma.c @@ -1453,12 +1453,9 @@ int sdma_init(struct hfi1_devdata *dd, u8 port) timer_setup(&sde->err_progress_check_timer, sdma_err_progress_check, 0); - sde->descq = dma_zalloc_coherent( - &dd->pcidev->dev, - descq_cnt * sizeof(u64[2]), - &sde->descq_phys, - GFP_KERNEL - ); + sde->descq = dma_alloc_coherent(&dd->pcidev->dev, + descq_cnt * sizeof(u64[2]), + &sde->descq_phys, GFP_KERNEL); if (!sde->descq) goto bail; sde->tx_ring = @@ -1471,24 +1468,18 @@ int sdma_init(struct hfi1_devdata *dd, u8 port) dd->sdma_heads_size = L1_CACHE_BYTES * num_engines; /* Allocate memory for DMA of head registers to memory */ - dd->sdma_heads_dma = dma_zalloc_coherent( - &dd->pcidev->dev, - dd->sdma_heads_size, - &dd->sdma_heads_phys, - GFP_KERNEL - ); + dd->sdma_heads_dma = dma_alloc_coherent(&dd->pcidev->dev, + dd->sdma_heads_size, + &dd->sdma_heads_phys, + GFP_KERNEL); if (!dd->sdma_heads_dma) { dd_dev_err(dd, "failed to allocate SendDMA head memory\n"); goto bail; } /* Allocate memory for pad */ - dd->sdma_pad_dma = dma_zalloc_coherent( - &dd->pcidev->dev, - sizeof(u32), - &dd->sdma_pad_phys, - GFP_KERNEL - ); + dd->sdma_pad_dma = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u32), + &dd->sdma_pad_phys, GFP_KERNEL); if (!dd->sdma_pad_dma) { dd_dev_err(dd, "failed to allocate SendDMA pad memory\n"); goto bail; diff --git a/drivers/infiniband/hw/hns/hns_roce_alloc.c b/drivers/infiniband/hw/hns/hns_roce_alloc.c index 6300033a448f..dac058d3df53 100644 --- a/drivers/infiniband/hw/hns/hns_roce_alloc.c +++ b/drivers/infiniband/hw/hns/hns_roce_alloc.c @@ -197,8 +197,8 @@ int hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size, u32 max_direct, buf->npages = 1 << order; buf->page_shift = page_shift; /* MTT PA must be recorded in 4k alignment, t is 4k aligned */ - buf->direct.buf = dma_zalloc_coherent(dev, - size, &t, GFP_KERNEL); + buf->direct.buf = dma_alloc_coherent(dev, size, &t, + GFP_KERNEL); if (!buf->direct.buf) return -ENOMEM; @@ -219,9 +219,10 @@ int hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size, u32 max_direct, return -ENOMEM; for (i = 0; i < buf->nbufs; ++i) { - buf->page_list[i].buf = dma_zalloc_coherent(dev, - page_size, &t, - GFP_KERNEL); + buf->page_list[i].buf = dma_alloc_coherent(dev, + page_size, + &t, + GFP_KERNEL); if (!buf->page_list[i].buf) goto err_free; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 3a669451cf86..543fa1504cd3 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -5091,7 +5091,7 @@ static int hns_roce_mhop_alloc_eq(struct hns_roce_dev *hr_dev, eqe_alloc = i * (buf_chk_sz / eq->eqe_size); size = (eq->entries - eqe_alloc) * eq->eqe_size; } - eq->buf[i] = dma_zalloc_coherent(dev, size, + eq->buf[i] = dma_alloc_coherent(dev, size, &(eq->buf_dma[i]), GFP_KERNEL); if (!eq->buf[i]) @@ -5126,9 +5126,9 @@ static int hns_roce_mhop_alloc_eq(struct hns_roce_dev *hr_dev, size = (eq->entries - eqe_alloc) * eq->eqe_size; } - eq->buf[idx] = dma_zalloc_coherent(dev, size, - &(eq->buf_dma[idx]), - GFP_KERNEL); + eq->buf[idx] = dma_alloc_coherent(dev, size, + &(eq->buf_dma[idx]), + GFP_KERNEL); if (!eq->buf[idx]) goto err_dma_alloc_buf; @@ -5241,7 +5241,7 @@ static int hns_roce_v2_create_eq(struct hns_roce_dev *hr_dev, goto free_cmd_mbox; } - eq->buf_list->buf = dma_zalloc_coherent(dev, buf_chk_sz, + eq->buf_list->buf = dma_alloc_coherent(dev, buf_chk_sz, &(eq->buf_list->map), GFP_KERNEL); if (!eq->buf_list->buf) { diff --git a/drivers/infiniband/hw/i40iw/i40iw_utils.c b/drivers/infiniband/hw/i40iw/i40iw_utils.c index a9ea966877f2..59e978141ad4 100644 --- a/drivers/infiniband/hw/i40iw/i40iw_utils.c +++ b/drivers/infiniband/hw/i40iw/i40iw_utils.c @@ -745,8 +745,8 @@ enum i40iw_status_code i40iw_allocate_dma_mem(struct i40iw_hw *hw, if (!mem) return I40IW_ERR_PARAM; mem->size = ALIGN(size, alignment); - mem->va = dma_zalloc_coherent(&pcidev->dev, mem->size, - (dma_addr_t *)&mem->pa, GFP_KERNEL); + mem->va = dma_alloc_coherent(&pcidev->dev, mem->size, + (dma_addr_t *)&mem->pa, GFP_KERNEL); if (!mem->va) return I40IW_ERR_NO_MEMORY; return 0; diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index cc9c0c8ccba3..112d2f38e0de 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -623,8 +623,9 @@ int mthca_alloc_db(struct mthca_dev *dev, enum mthca_db_type type, page = dev->db_tab->page + end; alloc: - page->db_rec = dma_zalloc_coherent(&dev->pdev->dev, MTHCA_ICM_PAGE_SIZE, - &page->mapping, GFP_KERNEL); + page->db_rec = dma_alloc_coherent(&dev->pdev->dev, + MTHCA_ICM_PAGE_SIZE, &page->mapping, + GFP_KERNEL); if (!page->db_rec) { ret = -ENOMEM; goto out; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c index 241a57a07485..097e5ab2a19f 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_hw.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_hw.c @@ -380,8 +380,8 @@ static int ocrdma_alloc_q(struct ocrdma_dev *dev, q->len = len; q->entry_size = entry_size; q->size = len * entry_size; - q->va = dma_zalloc_coherent(&dev->nic_info.pdev->dev, q->size, - &q->dma, GFP_KERNEL); + q->va = dma_alloc_coherent(&dev->nic_info.pdev->dev, q->size, &q->dma, + GFP_KERNEL); if (!q->va) return -ENOMEM; return 0; @@ -1819,7 +1819,7 @@ int ocrdma_mbx_create_cq(struct ocrdma_dev *dev, struct ocrdma_cq *cq, return -ENOMEM; ocrdma_init_mch(&cmd->cmd.req, OCRDMA_CMD_CREATE_CQ, OCRDMA_SUBSYS_COMMON, sizeof(*cmd)); - cq->va = dma_zalloc_coherent(&pdev->dev, cq->len, &cq->pa, GFP_KERNEL); + cq->va = dma_alloc_coherent(&pdev->dev, cq->len, &cq->pa, GFP_KERNEL); if (!cq->va) { status = -ENOMEM; goto mem_err; @@ -2209,7 +2209,7 @@ static int ocrdma_set_create_qp_sq_cmd(struct ocrdma_create_qp_req *cmd, qp->sq.max_cnt = max_wqe_allocated; len = (hw_pages * hw_page_size); - qp->sq.va = dma_zalloc_coherent(&pdev->dev, len, &pa, GFP_KERNEL); + qp->sq.va = dma_alloc_coherent(&pdev->dev, len, &pa, GFP_KERNEL); if (!qp->sq.va) return -EINVAL; qp->sq.len = len; @@ -2259,7 +2259,7 @@ static int ocrdma_set_create_qp_rq_cmd(struct ocrdma_create_qp_req *cmd, qp->rq.max_cnt = max_rqe_allocated; len = (hw_pages * hw_page_size); - qp->rq.va = dma_zalloc_coherent(&pdev->dev, len, &pa, GFP_KERNEL); + qp->rq.va = dma_alloc_coherent(&pdev->dev, len, &pa, GFP_KERNEL); if (!qp->rq.va) return -ENOMEM; qp->rq.pa = pa; @@ -2315,8 +2315,8 @@ static int ocrdma_set_create_qp_ird_cmd(struct ocrdma_create_qp_req *cmd, if (dev->attr.ird == 0) return 0; - qp->ird_q_va = dma_zalloc_coherent(&pdev->dev, ird_q_len, &pa, - GFP_KERNEL); + qp->ird_q_va = dma_alloc_coherent(&pdev->dev, ird_q_len, &pa, + GFP_KERNEL); if (!qp->ird_q_va) return -ENOMEM; ocrdma_build_q_pages(&cmd->ird_addr[0], dev->attr.num_ird_pages, diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c index dd15474b19b7..6be0ea109138 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_stats.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_stats.c @@ -73,8 +73,8 @@ bool ocrdma_alloc_stats_resources(struct ocrdma_dev *dev) mem->size = max_t(u32, sizeof(struct ocrdma_rdma_stats_req), sizeof(struct ocrdma_rdma_stats_resp)); - mem->va = dma_zalloc_coherent(&dev->nic_info.pdev->dev, mem->size, - &mem->pa, GFP_KERNEL); + mem->va = dma_alloc_coherent(&dev->nic_info.pdev->dev, mem->size, + &mem->pa, GFP_KERNEL); if (!mem->va) { pr_err("%s: stats mbox allocation failed\n", __func__); return false; diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index c46bed0c5513..287c332ff0e6 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -504,8 +504,8 @@ struct ib_ucontext *ocrdma_alloc_ucontext(struct ib_device *ibdev, INIT_LIST_HEAD(&ctx->mm_head); mutex_init(&ctx->mm_list_lock); - ctx->ah_tbl.va = dma_zalloc_coherent(&pdev->dev, map_len, - &ctx->ah_tbl.pa, GFP_KERNEL); + ctx->ah_tbl.va = dma_alloc_coherent(&pdev->dev, map_len, + &ctx->ah_tbl.pa, GFP_KERNEL); if (!ctx->ah_tbl.va) { kfree(ctx); return ERR_PTR(-ENOMEM); @@ -838,7 +838,7 @@ static int ocrdma_build_pbl_tbl(struct ocrdma_dev *dev, struct ocrdma_hw_mr *mr) return -ENOMEM; for (i = 0; i < mr->num_pbls; i++) { - va = dma_zalloc_coherent(&pdev->dev, dma_len, &pa, GFP_KERNEL); + va = dma_alloc_coherent(&pdev->dev, dma_len, &pa, GFP_KERNEL); if (!va) { ocrdma_free_mr_pbl_tbl(dev, mr); status = -ENOMEM; diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index b342a70e2814..e1ccf32b1c3d 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -556,8 +556,8 @@ static struct qedr_pbl *qedr_alloc_pbl_tbl(struct qedr_dev *dev, return ERR_PTR(-ENOMEM); for (i = 0; i < pbl_info->num_pbls; i++) { - va = dma_zalloc_coherent(&pdev->dev, pbl_info->pbl_size, - &pa, flags); + va = dma_alloc_coherent(&pdev->dev, pbl_info->pbl_size, &pa, + flags); if (!va) goto err; diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c index eaa109dbc96a..39c37b6fd715 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c @@ -890,8 +890,8 @@ static int pvrdma_pci_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "device version %d, driver version %d\n", dev->dsr_version, PVRDMA_VERSION); - dev->dsr = dma_zalloc_coherent(&pdev->dev, sizeof(*dev->dsr), - &dev->dsrbase, GFP_KERNEL); + dev->dsr = dma_alloc_coherent(&pdev->dev, sizeof(*dev->dsr), + &dev->dsrbase, GFP_KERNEL); if (!dev->dsr) { dev_err(&pdev->dev, "failed to allocate shared region\n"); ret = -ENOMEM; diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c index f456c1125bd6..69881265d121 100644 --- a/drivers/input/touchscreen/raspberrypi-ts.c +++ b/drivers/input/touchscreen/raspberrypi-ts.c @@ -147,8 +147,8 @@ static int rpi_ts_probe(struct platform_device *pdev) return -ENOMEM; ts->pdev = pdev; - ts->fw_regs_va = dma_zalloc_coherent(dev, PAGE_SIZE, &ts->fw_regs_phys, - GFP_KERNEL); + ts->fw_regs_va = dma_alloc_coherent(dev, PAGE_SIZE, &ts->fw_regs_phys, + GFP_KERNEL); if (!ts->fw_regs_va) { dev_err(dev, "failed to dma_alloc_coherent\n"); return -ENOMEM; diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c index 6ede4286b835..730f7dabcf37 100644 --- a/drivers/iommu/mtk_iommu_v1.c +++ b/drivers/iommu/mtk_iommu_v1.c @@ -232,9 +232,8 @@ static int mtk_iommu_domain_finalise(struct mtk_iommu_data *data) spin_lock_init(&dom->pgtlock); - dom->pgt_va = dma_zalloc_coherent(data->dev, - M2701_IOMMU_PGT_SIZE, - &dom->pgt_pa, GFP_KERNEL); + dom->pgt_va = dma_alloc_coherent(data->dev, M2701_IOMMU_PGT_SIZE, + &dom->pgt_pa, GFP_KERNEL); if (!dom->pgt_va) return -ENOMEM; diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c index 447baaebca44..cdb79ae2d8dc 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c @@ -218,8 +218,8 @@ static int cio2_fbpt_init(struct cio2_device *cio2, struct cio2_queue *q) { struct device *dev = &cio2->pci_dev->dev; - q->fbpt = dma_zalloc_coherent(dev, CIO2_FBPT_SIZE, &q->fbpt_bus_addr, - GFP_KERNEL); + q->fbpt = dma_alloc_coherent(dev, CIO2_FBPT_SIZE, &q->fbpt_bus_addr, + GFP_KERNEL); if (!q->fbpt) return -ENOMEM; diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c index e80123cba406..060c0ad6243a 100644 --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c @@ -49,7 +49,7 @@ int mtk_vcodec_mem_alloc(struct mtk_vcodec_ctx *data, struct mtk_vcodec_ctx *ctx = (struct mtk_vcodec_ctx *)data; struct device *dev = &ctx->dev->plat_dev->dev; - mem->va = dma_zalloc_coherent(dev, size, &mem->dma_addr, GFP_KERNEL); + mem->va = dma_alloc_coherent(dev, size, &mem->dma_addr, GFP_KERNEL); if (!mem->va) { mtk_v4l2_err("%s dma_alloc size=%ld failed!", dev_name(dev), size); diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c index efe2fb72d54b..25265fd0fd6e 100644 --- a/drivers/misc/genwqe/card_utils.c +++ b/drivers/misc/genwqe/card_utils.c @@ -218,8 +218,8 @@ void *__genwqe_alloc_consistent(struct genwqe_dev *cd, size_t size, if (get_order(size) >= MAX_ORDER) return NULL; - return dma_zalloc_coherent(&cd->pci_dev->dev, size, dma_handle, - GFP_KERNEL); + return dma_alloc_coherent(&cd->pci_dev->dev, size, dma_handle, + GFP_KERNEL); } void __genwqe_free_consistent(struct genwqe_dev *cd, size_t size, diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index a22e11a65658..eba9bcc92ad3 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3763,8 +3763,9 @@ int sdhci_setup_host(struct sdhci_host *host) * Use zalloc to zero the reserved high 32-bits of 128-bit * descriptors so that they never need to be written. */ - buf = dma_zalloc_coherent(mmc_dev(mmc), host->align_buffer_sz + - host->adma_table_sz, &dma, GFP_KERNEL); + buf = dma_alloc_coherent(mmc_dev(mmc), + host->align_buffer_sz + host->adma_table_sz, + &dma, GFP_KERNEL); if (!buf) { pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n", mmc_hostname(mmc)); diff --git a/drivers/net/ethernet/aeroflex/greth.c b/drivers/net/ethernet/aeroflex/greth.c index 91fc64c1145e..47e5984f16fb 100644 --- a/drivers/net/ethernet/aeroflex/greth.c +++ b/drivers/net/ethernet/aeroflex/greth.c @@ -1433,18 +1433,18 @@ static int greth_of_probe(struct platform_device *ofdev) } /* Allocate TX descriptor ring in coherent memory */ - greth->tx_bd_base = dma_zalloc_coherent(greth->dev, 1024, - &greth->tx_bd_base_phys, - GFP_KERNEL); + greth->tx_bd_base = dma_alloc_coherent(greth->dev, 1024, + &greth->tx_bd_base_phys, + GFP_KERNEL); if (!greth->tx_bd_base) { err = -ENOMEM; goto error3; } /* Allocate RX descriptor ring in coherent memory */ - greth->rx_bd_base = dma_zalloc_coherent(greth->dev, 1024, - &greth->rx_bd_base_phys, - GFP_KERNEL); + greth->rx_bd_base = dma_alloc_coherent(greth->dev, 1024, + &greth->rx_bd_base_phys, + GFP_KERNEL); if (!greth->rx_bd_base) { err = -ENOMEM; goto error4; diff --git a/drivers/net/ethernet/alacritech/slicoss.c b/drivers/net/ethernet/alacritech/slicoss.c index 0b60921c392f..16477aa6d61f 100644 --- a/drivers/net/ethernet/alacritech/slicoss.c +++ b/drivers/net/ethernet/alacritech/slicoss.c @@ -795,8 +795,8 @@ static int slic_init_stat_queue(struct slic_device *sdev) size = stq->len * sizeof(*descs) + DESC_ALIGN_MASK; for (i = 0; i < SLIC_NUM_STAT_DESC_ARRAYS; i++) { - descs = dma_zalloc_coherent(&sdev->pdev->dev, size, &paddr, - GFP_KERNEL); + descs = dma_alloc_coherent(&sdev->pdev->dev, size, &paddr, + GFP_KERNEL); if (!descs) { netdev_err(sdev->netdev, "failed to allocate status descriptors\n"); @@ -1240,8 +1240,8 @@ static int slic_init_shmem(struct slic_device *sdev) struct slic_shmem_data *sm_data; dma_addr_t paddr; - sm_data = dma_zalloc_coherent(&sdev->pdev->dev, sizeof(*sm_data), - &paddr, GFP_KERNEL); + sm_data = dma_alloc_coherent(&sdev->pdev->dev, sizeof(*sm_data), + &paddr, GFP_KERNEL); if (!sm_data) { dev_err(&sdev->pdev->dev, "failed to allocate shared memory\n"); return -ENOMEM; @@ -1621,8 +1621,8 @@ static int slic_read_eeprom(struct slic_device *sdev) int err = 0; u8 *mac[2]; - eeprom = dma_zalloc_coherent(&sdev->pdev->dev, SLIC_EEPROM_SIZE, - &paddr, GFP_KERNEL); + eeprom = dma_alloc_coherent(&sdev->pdev->dev, SLIC_EEPROM_SIZE, + &paddr, GFP_KERNEL); if (!eeprom) return -ENOMEM; diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index 420cede41ca4..b17d435de09f 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -111,8 +111,8 @@ static int ena_com_admin_init_sq(struct ena_com_admin_queue *queue) struct ena_com_admin_sq *sq = &queue->sq; u16 size = ADMIN_SQ_SIZE(queue->q_depth); - sq->entries = dma_zalloc_coherent(queue->q_dmadev, size, &sq->dma_addr, - GFP_KERNEL); + sq->entries = dma_alloc_coherent(queue->q_dmadev, size, &sq->dma_addr, + GFP_KERNEL); if (!sq->entries) { pr_err("memory allocation failed"); @@ -133,8 +133,8 @@ static int ena_com_admin_init_cq(struct ena_com_admin_queue *queue) struct ena_com_admin_cq *cq = &queue->cq; u16 size = ADMIN_CQ_SIZE(queue->q_depth); - cq->entries = dma_zalloc_coherent(queue->q_dmadev, size, &cq->dma_addr, - GFP_KERNEL); + cq->entries = dma_alloc_coherent(queue->q_dmadev, size, &cq->dma_addr, + GFP_KERNEL); if (!cq->entries) { pr_err("memory allocation failed"); @@ -156,8 +156,8 @@ static int ena_com_admin_init_aenq(struct ena_com_dev *dev, dev->aenq.q_depth = ENA_ASYNC_QUEUE_DEPTH; size = ADMIN_AENQ_SIZE(ENA_ASYNC_QUEUE_DEPTH); - aenq->entries = dma_zalloc_coherent(dev->dmadev, size, &aenq->dma_addr, - GFP_KERNEL); + aenq->entries = dma_alloc_coherent(dev->dmadev, size, &aenq->dma_addr, + GFP_KERNEL); if (!aenq->entries) { pr_err("memory allocation failed"); @@ -344,15 +344,15 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev, dev_node = dev_to_node(ena_dev->dmadev); set_dev_node(ena_dev->dmadev, ctx->numa_node); io_sq->desc_addr.virt_addr = - dma_zalloc_coherent(ena_dev->dmadev, size, - &io_sq->desc_addr.phys_addr, - GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, size, + &io_sq->desc_addr.phys_addr, + GFP_KERNEL); set_dev_node(ena_dev->dmadev, dev_node); if (!io_sq->desc_addr.virt_addr) { io_sq->desc_addr.virt_addr = - dma_zalloc_coherent(ena_dev->dmadev, size, - &io_sq->desc_addr.phys_addr, - GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, size, + &io_sq->desc_addr.phys_addr, + GFP_KERNEL); } if (!io_sq->desc_addr.virt_addr) { @@ -425,14 +425,14 @@ static int ena_com_init_io_cq(struct ena_com_dev *ena_dev, prev_node = dev_to_node(ena_dev->dmadev); set_dev_node(ena_dev->dmadev, ctx->numa_node); io_cq->cdesc_addr.virt_addr = - dma_zalloc_coherent(ena_dev->dmadev, size, - &io_cq->cdesc_addr.phys_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, size, + &io_cq->cdesc_addr.phys_addr, GFP_KERNEL); set_dev_node(ena_dev->dmadev, prev_node); if (!io_cq->cdesc_addr.virt_addr) { io_cq->cdesc_addr.virt_addr = - dma_zalloc_coherent(ena_dev->dmadev, size, - &io_cq->cdesc_addr.phys_addr, - GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, size, + &io_cq->cdesc_addr.phys_addr, + GFP_KERNEL); } if (!io_cq->cdesc_addr.virt_addr) { @@ -1026,8 +1026,8 @@ static int ena_com_hash_key_allocate(struct ena_com_dev *ena_dev) struct ena_rss *rss = &ena_dev->rss; rss->hash_key = - dma_zalloc_coherent(ena_dev->dmadev, sizeof(*rss->hash_key), - &rss->hash_key_dma_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, sizeof(*rss->hash_key), + &rss->hash_key_dma_addr, GFP_KERNEL); if (unlikely(!rss->hash_key)) return -ENOMEM; @@ -1050,8 +1050,8 @@ static int ena_com_hash_ctrl_init(struct ena_com_dev *ena_dev) struct ena_rss *rss = &ena_dev->rss; rss->hash_ctrl = - dma_zalloc_coherent(ena_dev->dmadev, sizeof(*rss->hash_ctrl), - &rss->hash_ctrl_dma_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, sizeof(*rss->hash_ctrl), + &rss->hash_ctrl_dma_addr, GFP_KERNEL); if (unlikely(!rss->hash_ctrl)) return -ENOMEM; @@ -1094,8 +1094,8 @@ static int ena_com_indirect_table_allocate(struct ena_com_dev *ena_dev, sizeof(struct ena_admin_rss_ind_table_entry); rss->rss_ind_tbl = - dma_zalloc_coherent(ena_dev->dmadev, tbl_size, - &rss->rss_ind_tbl_dma_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, tbl_size, + &rss->rss_ind_tbl_dma_addr, GFP_KERNEL); if (unlikely(!rss->rss_ind_tbl)) goto mem_err1; @@ -1649,9 +1649,9 @@ int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev) spin_lock_init(&mmio_read->lock); mmio_read->read_resp = - dma_zalloc_coherent(ena_dev->dmadev, - sizeof(*mmio_read->read_resp), - &mmio_read->read_resp_dma_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, + sizeof(*mmio_read->read_resp), + &mmio_read->read_resp_dma_addr, GFP_KERNEL); if (unlikely(!mmio_read->read_resp)) goto err; @@ -2623,8 +2623,8 @@ int ena_com_allocate_host_info(struct ena_com_dev *ena_dev) struct ena_host_attribute *host_attr = &ena_dev->host_attr; host_attr->host_info = - dma_zalloc_coherent(ena_dev->dmadev, SZ_4K, - &host_attr->host_info_dma_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, SZ_4K, + &host_attr->host_info_dma_addr, GFP_KERNEL); if (unlikely(!host_attr->host_info)) return -ENOMEM; @@ -2641,8 +2641,9 @@ int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev, struct ena_host_attribute *host_attr = &ena_dev->host_attr; host_attr->debug_area_virt_addr = - dma_zalloc_coherent(ena_dev->dmadev, debug_area_size, - &host_attr->debug_area_dma_addr, GFP_KERNEL); + dma_alloc_coherent(ena_dev->dmadev, debug_area_size, + &host_attr->debug_area_dma_addr, + GFP_KERNEL); if (unlikely(!host_attr->debug_area_virt_addr)) { host_attr->debug_area_size = 0; return -ENOMEM; diff --git a/drivers/net/ethernet/apm/xgene-v2/main.c b/drivers/net/ethernet/apm/xgene-v2/main.c index 0f2ad50f3bd7..87b142a312e0 100644 --- a/drivers/net/ethernet/apm/xgene-v2/main.c +++ b/drivers/net/ethernet/apm/xgene-v2/main.c @@ -206,8 +206,8 @@ static netdev_tx_t xge_start_xmit(struct sk_buff *skb, struct net_device *ndev) } /* Packet buffers should be 64B aligned */ - pkt_buf = dma_zalloc_coherent(dev, XGENE_ENET_STD_MTU, &dma_addr, - GFP_ATOMIC); + pkt_buf = dma_alloc_coherent(dev, XGENE_ENET_STD_MTU, &dma_addr, + GFP_ATOMIC); if (unlikely(!pkt_buf)) { dev_kfree_skb_any(skb); return NETDEV_TX_OK; @@ -428,8 +428,8 @@ static struct xge_desc_ring *xge_create_desc_ring(struct net_device *ndev) ring->ndev = ndev; size = XGENE_ENET_DESC_SIZE * XGENE_ENET_NUM_DESC; - ring->desc_addr = dma_zalloc_coherent(dev, size, &ring->dma_addr, - GFP_KERNEL); + ring->desc_addr = dma_alloc_coherent(dev, size, &ring->dma_addr, + GFP_KERNEL); if (!ring->desc_addr) goto err; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c131cfc1b79d..e3538ba7d0e7 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -660,10 +660,9 @@ static int alx_alloc_rings(struct alx_priv *alx) alx->num_txq + sizeof(struct alx_rrd) * alx->rx_ringsz + sizeof(struct alx_rfd) * alx->rx_ringsz; - alx->descmem.virt = dma_zalloc_coherent(&alx->hw.pdev->dev, - alx->descmem.size, - &alx->descmem.dma, - GFP_KERNEL); + alx->descmem.virt = dma_alloc_coherent(&alx->hw.pdev->dev, + alx->descmem.size, + &alx->descmem.dma, GFP_KERNEL); if (!alx->descmem.virt) return -ENOMEM; diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 7087b88550db..3a3b35b5df67 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1019,8 +1019,8 @@ static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter) sizeof(struct atl1c_recv_ret_status) * rx_desc_count + 8 * 4; - ring_header->desc = dma_zalloc_coherent(&pdev->dev, ring_header->size, - &ring_header->dma, GFP_KERNEL); + ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size, + &ring_header->dma, GFP_KERNEL); if (unlikely(!ring_header->desc)) { dev_err(&pdev->dev, "could not get memory for DMA buffer\n"); goto err_nomem; diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index 6bae973d4dce..09cd188826b1 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -936,7 +936,7 @@ static int bcm_enet_open(struct net_device *dev) /* allocate rx dma ring */ size = priv->rx_ring_size * sizeof(struct bcm_enet_desc); - p = dma_zalloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL); + p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL); if (!p) { ret = -ENOMEM; goto out_freeirq_tx; @@ -947,7 +947,7 @@ static int bcm_enet_open(struct net_device *dev) /* allocate tx dma ring */ size = priv->tx_ring_size * sizeof(struct bcm_enet_desc); - p = dma_zalloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL); + p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL); if (!p) { ret = -ENOMEM; goto out_free_rx_ring; @@ -2120,7 +2120,7 @@ static int bcm_enetsw_open(struct net_device *dev) /* allocate rx dma ring */ size = priv->rx_ring_size * sizeof(struct bcm_enet_desc); - p = dma_zalloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL); + p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL); if (!p) { dev_err(kdev, "cannot allocate rx ring %u\n", size); ret = -ENOMEM; @@ -2132,7 +2132,7 @@ static int bcm_enetsw_open(struct net_device *dev) /* allocate tx dma ring */ size = priv->tx_ring_size * sizeof(struct bcm_enet_desc); - p = dma_zalloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL); + p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL); if (!p) { dev_err(kdev, "cannot allocate tx ring\n"); ret = -ENOMEM; diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index 4574275ef445..f9521d0274b7 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1506,8 +1506,8 @@ static int bcm_sysport_init_tx_ring(struct bcm_sysport_priv *priv, /* We just need one DMA descriptor which is DMA-able, since writing to * the port will allocate a new descriptor in its internal linked-list */ - p = dma_zalloc_coherent(kdev, sizeof(struct dma_desc), &ring->desc_dma, - GFP_KERNEL); + p = dma_alloc_coherent(kdev, sizeof(struct dma_desc), &ring->desc_dma, + GFP_KERNEL); if (!p) { netif_err(priv, hw, priv->netdev, "DMA alloc failed\n"); return -ENOMEM; diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index cabc8e49ad24..2d3a44c40221 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -634,9 +634,9 @@ static int bgmac_dma_alloc(struct bgmac *bgmac) /* Alloc ring of descriptors */ size = BGMAC_TX_RING_SLOTS * sizeof(struct bgmac_dma_desc); - ring->cpu_base = dma_zalloc_coherent(dma_dev, size, - &ring->dma_base, - GFP_KERNEL); + ring->cpu_base = dma_alloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); if (!ring->cpu_base) { dev_err(bgmac->dev, "Allocation of TX ring 0x%X failed\n", ring->mmio_base); @@ -659,9 +659,9 @@ static int bgmac_dma_alloc(struct bgmac *bgmac) /* Alloc ring of descriptors */ size = BGMAC_RX_RING_SLOTS * sizeof(struct bgmac_dma_desc); - ring->cpu_base = dma_zalloc_coherent(dma_dev, size, - &ring->dma_base, - GFP_KERNEL); + ring->cpu_base = dma_alloc_coherent(dma_dev, size, + &ring->dma_base, + GFP_KERNEL); if (!ring->cpu_base) { dev_err(bgmac->dev, "Allocation of RX ring 0x%X failed\n", ring->mmio_base); diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index bbb247116045..d63371d70bce 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -844,8 +844,8 @@ bnx2_alloc_stats_blk(struct net_device *dev) BNX2_SBLK_MSIX_ALIGN_SIZE); bp->status_stats_size = status_blk_size + sizeof(struct statistics_block); - status_blk = dma_zalloc_coherent(&bp->pdev->dev, bp->status_stats_size, - &bp->status_blk_mapping, GFP_KERNEL); + status_blk = dma_alloc_coherent(&bp->pdev->dev, bp->status_stats_size, + &bp->status_blk_mapping, GFP_KERNEL); if (!status_blk) return -ENOMEM; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 3aa80da973d7..4ab6eb3baefc 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -3449,10 +3449,10 @@ alloc_ext_stats: goto alloc_tx_ext_stats; bp->hw_rx_port_stats_ext = - dma_zalloc_coherent(&pdev->dev, - sizeof(struct rx_port_stats_ext), - &bp->hw_rx_port_stats_ext_map, - GFP_KERNEL); + dma_alloc_coherent(&pdev->dev, + sizeof(struct rx_port_stats_ext), + &bp->hw_rx_port_stats_ext_map, + GFP_KERNEL); if (!bp->hw_rx_port_stats_ext) return 0; @@ -3462,10 +3462,10 @@ alloc_tx_ext_stats: if (bp->hwrm_spec_code >= 0x10902) { bp->hw_tx_port_stats_ext = - dma_zalloc_coherent(&pdev->dev, - sizeof(struct tx_port_stats_ext), - &bp->hw_tx_port_stats_ext_map, - GFP_KERNEL); + dma_alloc_coherent(&pdev->dev, + sizeof(struct tx_port_stats_ext), + &bp->hw_tx_port_stats_ext_map, + GFP_KERNEL); } bp->flags |= BNXT_FLAG_PORT_STATS_EXT; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c index 15c7041e937b..70775158c8c4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c @@ -316,8 +316,8 @@ static int bnxt_hwrm_set_dcbx_app(struct bnxt *bp, struct dcb_app *app, n = IEEE_8021QAZ_MAX_TCS; data_len = sizeof(*data) + sizeof(*fw_app) * n; - data = dma_zalloc_coherent(&bp->pdev->dev, data_len, &mapping, - GFP_KERNEL); + data = dma_alloc_coherent(&bp->pdev->dev, data_len, &mapping, + GFP_KERNEL); if (!data) return -ENOMEM; diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c index 140dbd62106d..7f56032e44ac 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c @@ -85,8 +85,8 @@ static int bnxt_hwrm_nvm_req(struct bnxt *bp, u32 param_id, void *msg, return -EFAULT; } - data_addr = dma_zalloc_coherent(&bp->pdev->dev, bytesize, - &data_dma_addr, GFP_KERNEL); + data_addr = dma_alloc_coherent(&bp->pdev->dev, bytesize, + &data_dma_addr, GFP_KERNEL); if (!data_addr) return -ENOMEM; diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3b1397af81f7..b1627dd5f2fd 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -8712,10 +8712,10 @@ static int tg3_mem_rx_acquire(struct tg3 *tp) if (!i && tg3_flag(tp, ENABLE_RSS)) continue; - tnapi->rx_rcb = dma_zalloc_coherent(&tp->pdev->dev, - TG3_RX_RCB_RING_BYTES(tp), - &tnapi->rx_rcb_mapping, - GFP_KERNEL); + tnapi->rx_rcb = dma_alloc_coherent(&tp->pdev->dev, + TG3_RX_RCB_RING_BYTES(tp), + &tnapi->rx_rcb_mapping, + GFP_KERNEL); if (!tnapi->rx_rcb) goto err_out; } @@ -8768,9 +8768,9 @@ static int tg3_alloc_consistent(struct tg3 *tp) { int i; - tp->hw_stats = dma_zalloc_coherent(&tp->pdev->dev, - sizeof(struct tg3_hw_stats), - &tp->stats_mapping, GFP_KERNEL); + tp->hw_stats = dma_alloc_coherent(&tp->pdev->dev, + sizeof(struct tg3_hw_stats), + &tp->stats_mapping, GFP_KERNEL); if (!tp->hw_stats) goto err_out; @@ -8778,10 +8778,10 @@ static int tg3_alloc_consistent(struct tg3 *tp) struct tg3_napi *tnapi = &tp->napi[i]; struct tg3_hw_status *sblk; - tnapi->hw_status = dma_zalloc_coherent(&tp->pdev->dev, - TG3_HW_STATUS_SIZE, - &tnapi->status_mapping, - GFP_KERNEL); + tnapi->hw_status = dma_alloc_coherent(&tp->pdev->dev, + TG3_HW_STATUS_SIZE, + &tnapi->status_mapping, + GFP_KERNEL); if (!tnapi->hw_status) goto err_out; diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index fcaf18fa3904..5b4d3badcb73 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -59,7 +59,7 @@ static int nicvf_alloc_q_desc_mem(struct nicvf *nic, struct q_desc_mem *dmem, dmem->q_len = q_len; dmem->size = (desc_size * q_len) + align_bytes; /* Save address, need it while freeing */ - dmem->unalign_base = dma_zalloc_coherent(&nic->pdev->dev, dmem->size, + dmem->unalign_base = dma_alloc_coherent(&nic->pdev->dev, dmem->size, &dmem->dma, GFP_KERNEL); if (!dmem->unalign_base) return -ENOMEM; diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c index 20b6e1b3f5e3..85f22c286680 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c @@ -620,7 +620,7 @@ static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size, { size_t len = nelem * elem_size; void *s = NULL; - void *p = dma_zalloc_coherent(&pdev->dev, len, phys, GFP_KERNEL); + void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL); if (!p) return NULL; diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index b90188401d4a..fc0bc6458e84 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -694,7 +694,7 @@ static void *alloc_ring(struct device *dev, size_t nelem, size_t elem_size, { size_t len = nelem * elem_size + stat_size; void *s = NULL; - void *p = dma_zalloc_coherent(dev, len, phys, GFP_KERNEL); + void *p = dma_alloc_coherent(dev, len, phys, GFP_KERNEL); if (!p) return NULL; diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c index 3007e1ac1e61..1d534f0baa69 100644 --- a/drivers/net/ethernet/chelsio/cxgb4vf/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4vf/sge.c @@ -756,7 +756,7 @@ static void *alloc_ring(struct device *dev, size_t nelem, size_t hwsize, * Allocate the hardware ring and PCI DMA bus address space for said. */ size_t hwlen = nelem * hwsize + stat_size; - void *hwring = dma_zalloc_coherent(dev, hwlen, busaddrp, GFP_KERNEL); + void *hwring = dma_alloc_coherent(dev, hwlen, busaddrp, GFP_KERNEL); if (!hwring) return NULL; diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 1e9d882c04ef..59a7f0b99069 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -1808,9 +1808,9 @@ int be_cmd_get_fat_dump(struct be_adapter *adapter, u32 buf_len, void *buf) total_size = buf_len; get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024; - get_fat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - get_fat_cmd.size, - &get_fat_cmd.dma, GFP_ATOMIC); + get_fat_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + get_fat_cmd.size, + &get_fat_cmd.dma, GFP_ATOMIC); if (!get_fat_cmd.va) return -ENOMEM; @@ -2302,8 +2302,8 @@ int be_cmd_read_port_transceiver_data(struct be_adapter *adapter, return -EINVAL; cmd.size = sizeof(struct be_cmd_resp_port_type); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_ATOMIC); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_ATOMIC); if (!cmd.va) { dev_err(&adapter->pdev->dev, "Memory allocation failed\n"); return -ENOMEM; @@ -3066,8 +3066,8 @@ int lancer_fw_download(struct be_adapter *adapter, flash_cmd.size = sizeof(struct lancer_cmd_req_write_object) + LANCER_FW_DOWNLOAD_CHUNK; - flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size, - &flash_cmd.dma, GFP_KERNEL); + flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size, &flash_cmd.dma, + GFP_KERNEL); if (!flash_cmd.va) return -ENOMEM; @@ -3184,8 +3184,8 @@ int be_fw_download(struct be_adapter *adapter, const struct firmware *fw) } flash_cmd.size = sizeof(struct be_cmd_write_flashrom); - flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size, &flash_cmd.dma, - GFP_KERNEL); + flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size, &flash_cmd.dma, + GFP_KERNEL); if (!flash_cmd.va) return -ENOMEM; @@ -3435,8 +3435,8 @@ int be_cmd_get_phy_info(struct be_adapter *adapter) goto err; } cmd.size = sizeof(struct be_cmd_req_get_phy_info); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_ATOMIC); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_ATOMIC); if (!cmd.va) { dev_err(&adapter->pdev->dev, "Memory alloc failure\n"); status = -ENOMEM; @@ -3522,9 +3522,9 @@ int be_cmd_get_cntl_attributes(struct be_adapter *adapter) memset(&attribs_cmd, 0, sizeof(struct be_dma_mem)); attribs_cmd.size = sizeof(struct be_cmd_resp_cntl_attribs); - attribs_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - attribs_cmd.size, - &attribs_cmd.dma, GFP_ATOMIC); + attribs_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + attribs_cmd.size, + &attribs_cmd.dma, GFP_ATOMIC); if (!attribs_cmd.va) { dev_err(&adapter->pdev->dev, "Memory allocation failure\n"); status = -ENOMEM; @@ -3699,10 +3699,10 @@ int be_cmd_get_mac_from_list(struct be_adapter *adapter, u8 *mac, memset(&get_mac_list_cmd, 0, sizeof(struct be_dma_mem)); get_mac_list_cmd.size = sizeof(struct be_cmd_resp_get_mac_list); - get_mac_list_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - get_mac_list_cmd.size, - &get_mac_list_cmd.dma, - GFP_ATOMIC); + get_mac_list_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + get_mac_list_cmd.size, + &get_mac_list_cmd.dma, + GFP_ATOMIC); if (!get_mac_list_cmd.va) { dev_err(&adapter->pdev->dev, @@ -3829,8 +3829,8 @@ int be_cmd_set_mac_list(struct be_adapter *adapter, u8 *mac_array, memset(&cmd, 0, sizeof(struct be_dma_mem)); cmd.size = sizeof(struct be_cmd_req_set_mac_list); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_KERNEL); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_KERNEL); if (!cmd.va) return -ENOMEM; @@ -4035,8 +4035,8 @@ int be_cmd_get_acpi_wol_cap(struct be_adapter *adapter) memset(&cmd, 0, sizeof(struct be_dma_mem)); cmd.size = sizeof(struct be_cmd_resp_acpi_wol_magic_config_v1); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_ATOMIC); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_ATOMIC); if (!cmd.va) { dev_err(&adapter->pdev->dev, "Memory allocation failure\n"); status = -ENOMEM; @@ -4089,9 +4089,9 @@ int be_cmd_set_fw_log_level(struct be_adapter *adapter, u32 level) memset(&extfat_cmd, 0, sizeof(struct be_dma_mem)); extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps); - extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - extfat_cmd.size, &extfat_cmd.dma, - GFP_ATOMIC); + extfat_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + extfat_cmd.size, &extfat_cmd.dma, + GFP_ATOMIC); if (!extfat_cmd.va) return -ENOMEM; @@ -4127,9 +4127,9 @@ int be_cmd_get_fw_log_level(struct be_adapter *adapter) memset(&extfat_cmd, 0, sizeof(struct be_dma_mem)); extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps); - extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - extfat_cmd.size, &extfat_cmd.dma, - GFP_ATOMIC); + extfat_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + extfat_cmd.size, &extfat_cmd.dma, + GFP_ATOMIC); if (!extfat_cmd.va) { dev_err(&adapter->pdev->dev, "%s: Memory allocation failure\n", @@ -4354,8 +4354,8 @@ int be_cmd_get_func_config(struct be_adapter *adapter, struct be_resources *res) memset(&cmd, 0, sizeof(struct be_dma_mem)); cmd.size = sizeof(struct be_cmd_resp_get_func_config); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_ATOMIC); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_ATOMIC); if (!cmd.va) { dev_err(&adapter->pdev->dev, "Memory alloc failure\n"); status = -ENOMEM; @@ -4452,8 +4452,8 @@ int be_cmd_get_profile_config(struct be_adapter *adapter, memset(&cmd, 0, sizeof(struct be_dma_mem)); cmd.size = sizeof(struct be_cmd_resp_get_profile_config); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_ATOMIC); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_ATOMIC); if (!cmd.va) return -ENOMEM; @@ -4539,8 +4539,8 @@ static int be_cmd_set_profile_config(struct be_adapter *adapter, void *desc, memset(&cmd, 0, sizeof(struct be_dma_mem)); cmd.size = sizeof(struct be_cmd_req_set_profile_config); - cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, - GFP_ATOMIC); + cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma, + GFP_ATOMIC); if (!cmd.va) return -ENOMEM; diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c index 3f6749fc889f..4c218341c51b 100644 --- a/drivers/net/ethernet/emulex/benet/be_ethtool.c +++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c @@ -274,8 +274,8 @@ static int lancer_cmd_read_file(struct be_adapter *adapter, u8 *file_name, int status = 0; read_cmd.size = LANCER_READ_FILE_CHUNK; - read_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, read_cmd.size, - &read_cmd.dma, GFP_ATOMIC); + read_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, read_cmd.size, + &read_cmd.dma, GFP_ATOMIC); if (!read_cmd.va) { dev_err(&adapter->pdev->dev, @@ -815,7 +815,7 @@ static int be_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) } cmd.size = sizeof(struct be_cmd_req_acpi_wol_magic_config); - cmd.va = dma_zalloc_coherent(dev, cmd.size, &cmd.dma, GFP_KERNEL); + cmd.va = dma_alloc_coherent(dev, cmd.size, &cmd.dma, GFP_KERNEL); if (!cmd.va) return -ENOMEM; @@ -851,9 +851,9 @@ static int be_test_ddr_dma(struct be_adapter *adapter) }; ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test); - ddrdma_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - ddrdma_cmd.size, &ddrdma_cmd.dma, - GFP_KERNEL); + ddrdma_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + ddrdma_cmd.size, &ddrdma_cmd.dma, + GFP_KERNEL); if (!ddrdma_cmd.va) return -ENOMEM; @@ -1014,9 +1014,9 @@ static int be_read_eeprom(struct net_device *netdev, memset(&eeprom_cmd, 0, sizeof(struct be_dma_mem)); eeprom_cmd.size = sizeof(struct be_cmd_req_seeprom_read); - eeprom_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, - eeprom_cmd.size, &eeprom_cmd.dma, - GFP_KERNEL); + eeprom_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, + eeprom_cmd.size, &eeprom_cmd.dma, + GFP_KERNEL); if (!eeprom_cmd.va) return -ENOMEM; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 852f5bfe5f6d..d5026909dec5 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -167,8 +167,8 @@ static int be_queue_alloc(struct be_adapter *adapter, struct be_queue_info *q, q->len = len; q->entry_size = entry_size; mem->size = len * entry_size; - mem->va = dma_zalloc_coherent(&adapter->pdev->dev, mem->size, &mem->dma, - GFP_KERNEL); + mem->va = dma_alloc_coherent(&adapter->pdev->dev, mem->size, + &mem->dma, GFP_KERNEL); if (!mem->va) return -ENOMEM; return 0; @@ -5766,9 +5766,9 @@ static int be_drv_init(struct be_adapter *adapter) int status = 0; mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16; - mbox_mem_alloc->va = dma_zalloc_coherent(dev, mbox_mem_alloc->size, - &mbox_mem_alloc->dma, - GFP_KERNEL); + mbox_mem_alloc->va = dma_alloc_coherent(dev, mbox_mem_alloc->size, + &mbox_mem_alloc->dma, + GFP_KERNEL); if (!mbox_mem_alloc->va) return -ENOMEM; @@ -5777,8 +5777,8 @@ static int be_drv_init(struct be_adapter *adapter) mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16); rx_filter->size = sizeof(struct be_cmd_req_rx_filter); - rx_filter->va = dma_zalloc_coherent(dev, rx_filter->size, - &rx_filter->dma, GFP_KERNEL); + rx_filter->va = dma_alloc_coherent(dev, rx_filter->size, + &rx_filter->dma, GFP_KERNEL); if (!rx_filter->va) { status = -ENOMEM; goto free_mbox; @@ -5792,8 +5792,8 @@ static int be_drv_init(struct be_adapter *adapter) stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v1); else stats_cmd->size = sizeof(struct be_cmd_req_get_stats_v2); - stats_cmd->va = dma_zalloc_coherent(dev, stats_cmd->size, - &stats_cmd->dma, GFP_KERNEL); + stats_cmd->va = dma_alloc_coherent(dev, stats_cmd->size, + &stats_cmd->dma, GFP_KERNEL); if (!stats_cmd->va) { status = -ENOMEM; goto free_rx_filter; diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c index 4d673225ed3e..3e5e97186fc4 100644 --- a/drivers/net/ethernet/faraday/ftgmac100.c +++ b/drivers/net/ethernet/faraday/ftgmac100.c @@ -935,16 +935,14 @@ static int ftgmac100_alloc_rings(struct ftgmac100 *priv) return -ENOMEM; /* Allocate descriptors */ - priv->rxdes = dma_zalloc_coherent(priv->dev, - MAX_RX_QUEUE_ENTRIES * - sizeof(struct ftgmac100_rxdes), - &priv->rxdes_dma, GFP_KERNEL); + priv->rxdes = dma_alloc_coherent(priv->dev, + MAX_RX_QUEUE_ENTRIES * sizeof(struct ftgmac100_rxdes), + &priv->rxdes_dma, GFP_KERNEL); if (!priv->rxdes) return -ENOMEM; - priv->txdes = dma_zalloc_coherent(priv->dev, - MAX_TX_QUEUE_ENTRIES * - sizeof(struct ftgmac100_txdes), - &priv->txdes_dma, GFP_KERNEL); + priv->txdes = dma_alloc_coherent(priv->dev, + MAX_TX_QUEUE_ENTRIES * sizeof(struct ftgmac100_txdes), + &priv->txdes_dma, GFP_KERNEL); if (!priv->txdes) return -ENOMEM; diff --git a/drivers/net/ethernet/faraday/ftmac100.c b/drivers/net/ethernet/faraday/ftmac100.c index 084f24daf2b5..2a0e820526dc 100644 --- a/drivers/net/ethernet/faraday/ftmac100.c +++ b/drivers/net/ethernet/faraday/ftmac100.c @@ -734,10 +734,9 @@ static int ftmac100_alloc_buffers(struct ftmac100 *priv) { int i; - priv->descs = dma_zalloc_coherent(priv->dev, - sizeof(struct ftmac100_descs), - &priv->descs_dma_addr, - GFP_KERNEL); + priv->descs = dma_alloc_coherent(priv->dev, + sizeof(struct ftmac100_descs), + &priv->descs_dma_addr, GFP_KERNEL); if (!priv->descs) return -ENOMEM; diff --git a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c index 471805ea363b..e5d853b7b454 100644 --- a/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c +++ b/drivers/net/ethernet/hisilicon/hix5hd2_gmac.c @@ -1006,8 +1006,8 @@ static int hix5hd2_init_hw_desc_queue(struct hix5hd2_priv *priv) for (i = 0; i < QUEUE_NUMS; i++) { size = priv->pool[i].count * sizeof(struct hix5hd2_desc); - virt_addr = dma_zalloc_coherent(dev, size, &phys_addr, - GFP_KERNEL); + virt_addr = dma_alloc_coherent(dev, size, &phys_addr, + GFP_KERNEL); if (virt_addr == NULL) goto error_free_pool; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 07cd58798083..1bf7a5f116a0 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -2041,9 +2041,8 @@ static int hns3_alloc_desc(struct hns3_enet_ring *ring) { int size = ring->desc_num * sizeof(ring->desc[0]); - ring->desc = dma_zalloc_coherent(ring_to_dev(ring), size, - &ring->desc_dma_addr, - GFP_KERNEL); + ring->desc = dma_alloc_coherent(ring_to_dev(ring), size, + &ring->desc_dma_addr, GFP_KERNEL); if (!ring->desc) return -ENOMEM; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c index 8af0cef5609b..e483a6e730e6 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c @@ -39,9 +39,8 @@ static int hclge_alloc_cmd_desc(struct hclge_cmq_ring *ring) { int size = ring->desc_num * sizeof(struct hclge_desc); - ring->desc = dma_zalloc_coherent(cmq_ring_to_dev(ring), - size, &ring->desc_dma_addr, - GFP_KERNEL); + ring->desc = dma_alloc_coherent(cmq_ring_to_dev(ring), size, + &ring->desc_dma_addr, GFP_KERNEL); if (!ring->desc) return -ENOMEM; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c index d5765c8cf3a3..4e78e8812a04 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c @@ -115,9 +115,8 @@ static int hclgevf_alloc_cmd_desc(struct hclgevf_cmq_ring *ring) { int size = ring->desc_num * sizeof(struct hclgevf_desc); - ring->desc = dma_zalloc_coherent(cmq_ring_to_dev(ring), - size, &ring->desc_dma_addr, - GFP_KERNEL); + ring->desc = dma_alloc_coherent(cmq_ring_to_dev(ring), size, + &ring->desc_dma_addr, GFP_KERNEL); if (!ring->desc) return -ENOMEM; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c index c40603a183df..b4fefb4c3064 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c @@ -613,8 +613,8 @@ static int alloc_cmd_buf(struct hinic_api_cmd_chain *chain, u8 *cmd_vaddr; int err = 0; - cmd_vaddr = dma_zalloc_coherent(&pdev->dev, API_CMD_BUF_SIZE, - &cmd_paddr, GFP_KERNEL); + cmd_vaddr = dma_alloc_coherent(&pdev->dev, API_CMD_BUF_SIZE, + &cmd_paddr, GFP_KERNEL); if (!cmd_vaddr) { dev_err(&pdev->dev, "Failed to allocate API CMD DMA memory\n"); return -ENOMEM; @@ -663,8 +663,8 @@ static int api_cmd_create_cell(struct hinic_api_cmd_chain *chain, dma_addr_t node_paddr; int err; - node = dma_zalloc_coherent(&pdev->dev, chain->cell_size, - &node_paddr, GFP_KERNEL); + node = dma_alloc_coherent(&pdev->dev, chain->cell_size, &node_paddr, + GFP_KERNEL); if (!node) { dev_err(&pdev->dev, "Failed to allocate dma API CMD cell\n"); return -ENOMEM; @@ -821,10 +821,10 @@ static int api_chain_init(struct hinic_api_cmd_chain *chain, if (!chain->cell_ctxt) return -ENOMEM; - chain->wb_status = dma_zalloc_coherent(&pdev->dev, - sizeof(*chain->wb_status), - &chain->wb_status_paddr, - GFP_KERNEL); + chain->wb_status = dma_alloc_coherent(&pdev->dev, + sizeof(*chain->wb_status), + &chain->wb_status_paddr, + GFP_KERNEL); if (!chain->wb_status) { dev_err(&pdev->dev, "Failed to allocate DMA wb status\n"); return -ENOMEM; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c index 7cb8b9b94726..683e67515016 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c @@ -593,10 +593,10 @@ static int alloc_eq_pages(struct hinic_eq *eq) } for (pg = 0; pg < eq->num_pages; pg++) { - eq->virt_addr[pg] = dma_zalloc_coherent(&pdev->dev, - eq->page_size, - &eq->dma_addr[pg], - GFP_KERNEL); + eq->virt_addr[pg] = dma_alloc_coherent(&pdev->dev, + eq->page_size, + &eq->dma_addr[pg], + GFP_KERNEL); if (!eq->virt_addr[pg]) { err = -ENOMEM; goto err_dma_alloc; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c index 8e5897669a3a..a322a22d9357 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c @@ -355,9 +355,9 @@ int hinic_io_create_qps(struct hinic_func_to_io *func_to_io, goto err_sq_db; } - ci_addr_base = dma_zalloc_coherent(&pdev->dev, CI_TABLE_SIZE(num_qps), - &func_to_io->ci_dma_base, - GFP_KERNEL); + ci_addr_base = dma_alloc_coherent(&pdev->dev, CI_TABLE_SIZE(num_qps), + &func_to_io->ci_dma_base, + GFP_KERNEL); if (!ci_addr_base) { dev_err(&pdev->dev, "Failed to allocate CI area\n"); err = -ENOMEM; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c index bbf9bdd0ee3e..d62cf509646a 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c @@ -336,9 +336,9 @@ static int alloc_rq_cqe(struct hinic_rq *rq) goto err_cqe_dma_arr_alloc; for (i = 0; i < wq->q_depth; i++) { - rq->cqe[i] = dma_zalloc_coherent(&pdev->dev, - sizeof(*rq->cqe[i]), - &rq->cqe_dma[i], GFP_KERNEL); + rq->cqe[i] = dma_alloc_coherent(&pdev->dev, + sizeof(*rq->cqe[i]), + &rq->cqe_dma[i], GFP_KERNEL); if (!rq->cqe[i]) goto err_cqe_alloc; } @@ -415,8 +415,8 @@ int hinic_init_rq(struct hinic_rq *rq, struct hinic_hwif *hwif, /* HW requirements: Must be at least 32 bit */ pi_size = ALIGN(sizeof(*rq->pi_virt_addr), sizeof(u32)); - rq->pi_virt_addr = dma_zalloc_coherent(&pdev->dev, pi_size, - &rq->pi_dma_addr, GFP_KERNEL); + rq->pi_virt_addr = dma_alloc_coherent(&pdev->dev, pi_size, + &rq->pi_dma_addr, GFP_KERNEL); if (!rq->pi_virt_addr) { dev_err(&pdev->dev, "Failed to allocate PI address\n"); err = -ENOMEM; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c index 1dfa7eb05c10..cb66e7024659 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c @@ -114,8 +114,8 @@ static int queue_alloc_page(struct hinic_hwif *hwif, u64 **vaddr, u64 *paddr, struct pci_dev *pdev = hwif->pdev; dma_addr_t dma_addr; - *vaddr = dma_zalloc_coherent(&pdev->dev, page_sz, &dma_addr, - GFP_KERNEL); + *vaddr = dma_alloc_coherent(&pdev->dev, page_sz, &dma_addr, + GFP_KERNEL); if (!*vaddr) { dev_err(&pdev->dev, "Failed to allocate dma for wqs page\n"); return -ENOMEM; @@ -482,8 +482,8 @@ static int alloc_wq_pages(struct hinic_wq *wq, struct hinic_hwif *hwif, u64 *paddr = &wq->block_vaddr[i]; dma_addr_t dma_addr; - *vaddr = dma_zalloc_coherent(&pdev->dev, wq->wq_page_size, - &dma_addr, GFP_KERNEL); + *vaddr = dma_alloc_coherent(&pdev->dev, wq->wq_page_size, + &dma_addr, GFP_KERNEL); if (!*vaddr) { dev_err(&pdev->dev, "Failed to allocate wq page\n"); goto err_alloc_wq_pages; diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c index fff09dcf9e34..787d5aca5278 100644 --- a/drivers/net/ethernet/ibm/emac/mal.c +++ b/drivers/net/ethernet/ibm/emac/mal.c @@ -636,8 +636,8 @@ static int mal_probe(struct platform_device *ofdev) bd_size = sizeof(struct mal_descriptor) * (NUM_TX_BUFF * mal->num_tx_chans + NUM_RX_BUFF * mal->num_rx_chans); - mal->bd_virt = dma_zalloc_coherent(&ofdev->dev, bd_size, &mal->bd_dma, - GFP_KERNEL); + mal->bd_virt = dma_alloc_coherent(&ofdev->dev, bd_size, &mal->bd_dma, + GFP_KERNEL); if (mal->bd_virt == NULL) { err = -ENOMEM; goto fail_unmap; diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c index 2569a168334c..a41008523c98 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c +++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c @@ -993,8 +993,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) txdr->size = txdr->count * sizeof(struct e1000_tx_desc); txdr->size = ALIGN(txdr->size, 4096); - txdr->desc = dma_zalloc_coherent(&pdev->dev, txdr->size, &txdr->dma, - GFP_KERNEL); + txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma, + GFP_KERNEL); if (!txdr->desc) { ret_val = 2; goto err_nomem; @@ -1051,8 +1051,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter) } rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); - rxdr->desc = dma_zalloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, - GFP_KERNEL); + rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, + GFP_KERNEL); if (!rxdr->desc) { ret_val = 6; goto err_nomem; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 308c006cb41d..189f231075c2 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2305,8 +2305,8 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, { struct pci_dev *pdev = adapter->pdev; - ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma, - GFP_KERNEL); + ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, + GFP_KERNEL); if (!ring->desc) return -ENOMEM; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 4d40878e395a..f52e2c46e6a7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -109,8 +109,8 @@ int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem, struct i40e_pf *pf = (struct i40e_pf *)hw->back; mem->size = ALIGN(size, alignment); - mem->va = dma_zalloc_coherent(&pf->pdev->dev, mem->size, - &mem->pa, GFP_KERNEL); + mem->va = dma_alloc_coherent(&pf->pdev->dev, mem->size, &mem->pa, + GFP_KERNEL); if (!mem->va) return -ENOMEM; diff --git a/drivers/net/ethernet/intel/ixgb/ixgb_main.c b/drivers/net/ethernet/intel/ixgb/ixgb_main.c index 1d4d1686909a..e5ac2d3fd816 100644 --- a/drivers/net/ethernet/intel/ixgb/ixgb_main.c +++ b/drivers/net/ethernet/intel/ixgb/ixgb_main.c @@ -680,8 +680,8 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter) txdr->size = txdr->count * sizeof(struct ixgb_tx_desc); txdr->size = ALIGN(txdr->size, 4096); - txdr->desc = dma_zalloc_coherent(&pdev->dev, txdr->size, &txdr->dma, - GFP_KERNEL); + txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma, + GFP_KERNEL); if (!txdr->desc) { vfree(txdr->buffer_info); return -ENOMEM; @@ -763,8 +763,8 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter) rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc); rxdr->size = ALIGN(rxdr->size, 4096); - rxdr->desc = dma_zalloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, - GFP_KERNEL); + rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma, + GFP_KERNEL); if (!rxdr->desc) { vfree(rxdr->buffer_info); diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index e0875476a780..16066c2d5b3a 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -2044,9 +2044,9 @@ static int mvpp2_aggr_txq_init(struct platform_device *pdev, u32 txq_dma; /* Allocate memory for TX descriptors */ - aggr_txq->descs = dma_zalloc_coherent(&pdev->dev, - MVPP2_AGGR_TXQ_SIZE * MVPP2_DESC_ALIGNED_SIZE, - &aggr_txq->descs_dma, GFP_KERNEL); + aggr_txq->descs = dma_alloc_coherent(&pdev->dev, + MVPP2_AGGR_TXQ_SIZE * MVPP2_DESC_ALIGNED_SIZE, + &aggr_txq->descs_dma, GFP_KERNEL); if (!aggr_txq->descs) return -ENOMEM; diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 0bd4351b2a49..f8a6d6e3cb7a 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -557,9 +557,9 @@ static int init_hash_table(struct pxa168_eth_private *pep) * table is full. */ if (!pep->htpr) { - pep->htpr = dma_zalloc_coherent(pep->dev->dev.parent, - HASH_ADDR_TABLE_SIZE, - &pep->htpr_dma, GFP_KERNEL); + pep->htpr = dma_alloc_coherent(pep->dev->dev.parent, + HASH_ADDR_TABLE_SIZE, + &pep->htpr_dma, GFP_KERNEL); if (!pep->htpr) return -ENOMEM; } else { @@ -1044,9 +1044,9 @@ static int rxq_init(struct net_device *dev) pep->rx_desc_count = 0; size = pep->rx_ring_size * sizeof(struct rx_desc); pep->rx_desc_area_size = size; - pep->p_rx_desc_area = dma_zalloc_coherent(pep->dev->dev.parent, size, - &pep->rx_desc_dma, - GFP_KERNEL); + pep->p_rx_desc_area = dma_alloc_coherent(pep->dev->dev.parent, size, + &pep->rx_desc_dma, + GFP_KERNEL); if (!pep->p_rx_desc_area) goto out; @@ -1103,9 +1103,9 @@ static int txq_init(struct net_device *dev) pep->tx_desc_count = 0; size = pep->tx_ring_size * sizeof(struct tx_desc); pep->tx_desc_area_size = size; - pep->p_tx_desc_area = dma_zalloc_coherent(pep->dev->dev.parent, size, - &pep->tx_desc_dma, - GFP_KERNEL); + pep->p_tx_desc_area = dma_alloc_coherent(pep->dev->dev.parent, size, + &pep->tx_desc_dma, + GFP_KERNEL); if (!pep->p_tx_desc_area) goto out; /* Initialize the next_desc_ptr links in the Tx descriptors ring */ diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 399f565dd85a..fe9653fa8aea 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -598,10 +598,10 @@ static int mtk_init_fq_dma(struct mtk_eth *eth) dma_addr_t dma_addr; int i; - eth->scratch_ring = dma_zalloc_coherent(eth->dev, - cnt * sizeof(struct mtk_tx_dma), - ð->phy_scratch_ring, - GFP_ATOMIC); + eth->scratch_ring = dma_alloc_coherent(eth->dev, + cnt * sizeof(struct mtk_tx_dma), + ð->phy_scratch_ring, + GFP_ATOMIC); if (unlikely(!eth->scratch_ring)) return -ENOMEM; @@ -1213,8 +1213,8 @@ static int mtk_tx_alloc(struct mtk_eth *eth) if (!ring->buf) goto no_tx_mem; - ring->dma = dma_zalloc_coherent(eth->dev, MTK_DMA_SIZE * sz, - &ring->phys, GFP_ATOMIC); + ring->dma = dma_alloc_coherent(eth->dev, MTK_DMA_SIZE * sz, + &ring->phys, GFP_ATOMIC); if (!ring->dma) goto no_tx_mem; @@ -1310,9 +1310,9 @@ static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag) return -ENOMEM; } - ring->dma = dma_zalloc_coherent(eth->dev, - rx_dma_size * sizeof(*ring->dma), - &ring->phys, GFP_ATOMIC); + ring->dma = dma_alloc_coherent(eth->dev, + rx_dma_size * sizeof(*ring->dma), + &ring->phys, GFP_ATOMIC); if (!ring->dma) return -ENOMEM; diff --git a/drivers/net/ethernet/mellanox/mlx4/alloc.c b/drivers/net/ethernet/mellanox/mlx4/alloc.c index 9af34e03892c..dbc483e4a2ef 100644 --- a/drivers/net/ethernet/mellanox/mlx4/alloc.c +++ b/drivers/net/ethernet/mellanox/mlx4/alloc.c @@ -584,8 +584,8 @@ static int mlx4_buf_direct_alloc(struct mlx4_dev *dev, int size, buf->npages = 1; buf->page_shift = get_order(size) + PAGE_SHIFT; buf->direct.buf = - dma_zalloc_coherent(&dev->persist->pdev->dev, - size, &t, GFP_KERNEL); + dma_alloc_coherent(&dev->persist->pdev->dev, size, &t, + GFP_KERNEL); if (!buf->direct.buf) return -ENOMEM; @@ -624,8 +624,8 @@ int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct, for (i = 0; i < buf->nbufs; ++i) { buf->page_list[i].buf = - dma_zalloc_coherent(&dev->persist->pdev->dev, - PAGE_SIZE, &t, GFP_KERNEL); + dma_alloc_coherent(&dev->persist->pdev->dev, + PAGE_SIZE, &t, GFP_KERNEL); if (!buf->page_list[i].buf) goto err_free; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/alloc.c b/drivers/net/ethernet/mellanox/mlx5/core/alloc.c index 456f30007ad6..421b9c3c8bf7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/alloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/alloc.c @@ -63,8 +63,8 @@ static void *mlx5_dma_zalloc_coherent_node(struct mlx5_core_dev *dev, mutex_lock(&priv->alloc_mutex); original_node = dev_to_node(&dev->pdev->dev); set_dev_node(&dev->pdev->dev, node); - cpu_handle = dma_zalloc_coherent(&dev->pdev->dev, size, - dma_handle, GFP_KERNEL); + cpu_handle = dma_alloc_coherent(&dev->pdev->dev, size, dma_handle, + GFP_KERNEL); set_dev_node(&dev->pdev->dev, original_node); mutex_unlock(&priv->alloc_mutex); return cpu_handle; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c index d3125cdf69db..3e0fa8a8077b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c @@ -1789,8 +1789,8 @@ static int alloc_cmd_page(struct mlx5_core_dev *dev, struct mlx5_cmd *cmd) { struct device *ddev = &dev->pdev->dev; - cmd->cmd_alloc_buf = dma_zalloc_coherent(ddev, MLX5_ADAPTER_PAGE_SIZE, - &cmd->alloc_dma, GFP_KERNEL); + cmd->cmd_alloc_buf = dma_alloc_coherent(ddev, MLX5_ADAPTER_PAGE_SIZE, + &cmd->alloc_dma, GFP_KERNEL); if (!cmd->cmd_alloc_buf) return -ENOMEM; @@ -1804,9 +1804,9 @@ static int alloc_cmd_page(struct mlx5_core_dev *dev, struct mlx5_cmd *cmd) dma_free_coherent(ddev, MLX5_ADAPTER_PAGE_SIZE, cmd->cmd_alloc_buf, cmd->alloc_dma); - cmd->cmd_alloc_buf = dma_zalloc_coherent(ddev, - 2 * MLX5_ADAPTER_PAGE_SIZE - 1, - &cmd->alloc_dma, GFP_KERNEL); + cmd->cmd_alloc_buf = dma_alloc_coherent(ddev, + 2 * MLX5_ADAPTER_PAGE_SIZE - 1, + &cmd->alloc_dma, GFP_KERNEL); if (!cmd->cmd_alloc_buf) return -ENOMEM; diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c index 5f384f73007d..19ce0e605096 100644 --- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c +++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c @@ -3604,9 +3604,9 @@ static int myri10ge_alloc_slices(struct myri10ge_priv *mgp) for (i = 0; i < mgp->num_slices; i++) { ss = &mgp->ss[i]; bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry); - ss->rx_done.entry = dma_zalloc_coherent(&pdev->dev, bytes, - &ss->rx_done.bus, - GFP_KERNEL); + ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes, + &ss->rx_done.bus, + GFP_KERNEL); if (ss->rx_done.entry == NULL) goto abort; bytes = sizeof(*ss->fw_stats); diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c index e97636d2e6ee..7d2d4241498f 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c @@ -2170,9 +2170,9 @@ nfp_net_tx_ring_alloc(struct nfp_net_dp *dp, struct nfp_net_tx_ring *tx_ring) tx_ring->cnt = dp->txd_cnt; tx_ring->size = array_size(tx_ring->cnt, sizeof(*tx_ring->txds)); - tx_ring->txds = dma_zalloc_coherent(dp->dev, tx_ring->size, - &tx_ring->dma, - GFP_KERNEL | __GFP_NOWARN); + tx_ring->txds = dma_alloc_coherent(dp->dev, tx_ring->size, + &tx_ring->dma, + GFP_KERNEL | __GFP_NOWARN); if (!tx_ring->txds) { netdev_warn(dp->netdev, "failed to allocate TX descriptor ring memory, requested descriptor count: %d, consider lowering descriptor count\n", tx_ring->cnt); @@ -2328,9 +2328,9 @@ nfp_net_rx_ring_alloc(struct nfp_net_dp *dp, struct nfp_net_rx_ring *rx_ring) rx_ring->cnt = dp->rxd_cnt; rx_ring->size = array_size(rx_ring->cnt, sizeof(*rx_ring->rxds)); - rx_ring->rxds = dma_zalloc_coherent(dp->dev, rx_ring->size, - &rx_ring->dma, - GFP_KERNEL | __GFP_NOWARN); + rx_ring->rxds = dma_alloc_coherent(dp->dev, rx_ring->size, + &rx_ring->dma, + GFP_KERNEL | __GFP_NOWARN); if (!rx_ring->rxds) { netdev_warn(dp->netdev, "failed to allocate RX descriptor ring memory, requested descriptor count: %d, consider lowering descriptor count\n", rx_ring->cnt); diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c index 0611f2335b4a..1e408d1a9b5f 100644 --- a/drivers/net/ethernet/ni/nixge.c +++ b/drivers/net/ethernet/ni/nixge.c @@ -287,9 +287,9 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev) priv->rx_bd_ci = 0; /* Allocate the Tx and Rx buffer descriptors. */ - priv->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, - sizeof(*priv->tx_bd_v) * TX_BD_NUM, - &priv->tx_bd_p, GFP_KERNEL); + priv->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*priv->tx_bd_v) * TX_BD_NUM, + &priv->tx_bd_p, GFP_KERNEL); if (!priv->tx_bd_v) goto out; @@ -299,9 +299,9 @@ static int nixge_hw_dma_bd_init(struct net_device *ndev) if (!priv->tx_skb) goto out; - priv->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent, - sizeof(*priv->rx_bd_v) * RX_BD_NUM, - &priv->rx_bd_p, GFP_KERNEL); + priv->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*priv->rx_bd_v) * RX_BD_NUM, + &priv->rx_bd_p, GFP_KERNEL); if (!priv->rx_bd_v) goto out; diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 43c0c10dfeb7..552d930e3940 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -1440,8 +1440,8 @@ pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter, size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY; rx_ring->rx_buff_pool = - dma_zalloc_coherent(&pdev->dev, size, - &rx_ring->rx_buff_pool_logic, GFP_KERNEL); + dma_alloc_coherent(&pdev->dev, size, + &rx_ring->rx_buff_pool_logic, GFP_KERNEL); if (!rx_ring->rx_buff_pool) return -ENOMEM; @@ -1755,8 +1755,8 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter, tx_ring->size = tx_ring->count * (int)sizeof(struct pch_gbe_tx_desc); - tx_ring->desc = dma_zalloc_coherent(&pdev->dev, tx_ring->size, - &tx_ring->dma, GFP_KERNEL); + tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); if (!tx_ring->desc) { vfree(tx_ring->buffer_info); return -ENOMEM; @@ -1798,8 +1798,8 @@ int pch_gbe_setup_rx_resources(struct pch_gbe_adapter *adapter, return -ENOMEM; rx_ring->size = rx_ring->count * (int)sizeof(struct pch_gbe_rx_desc); - rx_ring->desc = dma_zalloc_coherent(&pdev->dev, rx_ring->size, - &rx_ring->dma, GFP_KERNEL); + rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); if (!rx_ring->desc) { vfree(rx_ring->buffer_info); return -ENOMEM; diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c index 8a31a02c9f47..d21041554507 100644 --- a/drivers/net/ethernet/pasemi/pasemi_mac.c +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c @@ -401,9 +401,9 @@ static int pasemi_mac_setup_rx_resources(const struct net_device *dev) if (pasemi_dma_alloc_ring(&ring->chan, RX_RING_SIZE)) goto out_ring_desc; - ring->buffers = dma_zalloc_coherent(&mac->dma_pdev->dev, - RX_RING_SIZE * sizeof(u64), - &ring->buf_dma, GFP_KERNEL); + ring->buffers = dma_alloc_coherent(&mac->dma_pdev->dev, + RX_RING_SIZE * sizeof(u64), + &ring->buf_dma, GFP_KERNEL); if (!ring->buffers) goto out_ring_desc; diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index dc1c1b616084..c2ad405b2f50 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -936,9 +936,9 @@ static int qed_cxt_src_t2_alloc(struct qed_hwfn *p_hwfn) u32 size = min_t(u32, total_size, psz); void **p_virt = &p_mngr->t2[i].p_virt; - *p_virt = dma_zalloc_coherent(&p_hwfn->cdev->pdev->dev, - size, &p_mngr->t2[i].p_phys, - GFP_KERNEL); + *p_virt = dma_alloc_coherent(&p_hwfn->cdev->pdev->dev, size, + &p_mngr->t2[i].p_phys, + GFP_KERNEL); if (!p_mngr->t2[i].p_virt) { rc = -ENOMEM; goto t2_fail; @@ -1054,8 +1054,8 @@ static int qed_ilt_blk_alloc(struct qed_hwfn *p_hwfn, u32 size; size = min_t(u32, sz_left, p_blk->real_size_in_page); - p_virt = dma_zalloc_coherent(&p_hwfn->cdev->pdev->dev, size, - &p_phys, GFP_KERNEL); + p_virt = dma_alloc_coherent(&p_hwfn->cdev->pdev->dev, size, + &p_phys, GFP_KERNEL); if (!p_virt) return -ENOMEM; @@ -2306,9 +2306,9 @@ qed_cxt_dynamic_ilt_alloc(struct qed_hwfn *p_hwfn, goto out0; } - p_virt = dma_zalloc_coherent(&p_hwfn->cdev->pdev->dev, - p_blk->real_size_in_page, &p_phys, - GFP_KERNEL); + p_virt = dma_alloc_coherent(&p_hwfn->cdev->pdev->dev, + p_blk->real_size_in_page, &p_phys, + GFP_KERNEL); if (!p_virt) { rc = -ENOMEM; goto out1; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index d344e9d43832..af38d3d73291 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -434,14 +434,14 @@ int qlcnic_82xx_fw_cmd_create_tx_ctx(struct qlcnic_adapter *adapter, *(tx_ring->hw_consumer) = 0; rq_size = SIZEOF_HOSTRQ_TX(struct qlcnic_hostrq_tx_ctx); - rq_addr = dma_zalloc_coherent(&adapter->pdev->dev, rq_size, - &rq_phys_addr, GFP_KERNEL); + rq_addr = dma_alloc_coherent(&adapter->pdev->dev, rq_size, + &rq_phys_addr, GFP_KERNEL); if (!rq_addr) return -ENOMEM; rsp_size = SIZEOF_CARDRSP_TX(struct qlcnic_cardrsp_tx_ctx); - rsp_addr = dma_zalloc_coherent(&adapter->pdev->dev, rsp_size, - &rsp_phys_addr, GFP_KERNEL); + rsp_addr = dma_alloc_coherent(&adapter->pdev->dev, rsp_size, + &rsp_phys_addr, GFP_KERNEL); if (!rsp_addr) { err = -ENOMEM; goto out_free_rq; @@ -855,8 +855,8 @@ int qlcnic_82xx_get_nic_info(struct qlcnic_adapter *adapter, struct qlcnic_cmd_args cmd; size_t nic_size = sizeof(struct qlcnic_info_le); - nic_info_addr = dma_zalloc_coherent(&adapter->pdev->dev, nic_size, - &nic_dma_t, GFP_KERNEL); + nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size, + &nic_dma_t, GFP_KERNEL); if (!nic_info_addr) return -ENOMEM; @@ -909,8 +909,8 @@ int qlcnic_82xx_set_nic_info(struct qlcnic_adapter *adapter, if (adapter->ahw->op_mode != QLCNIC_MGMT_FUNC) return err; - nic_info_addr = dma_zalloc_coherent(&adapter->pdev->dev, nic_size, - &nic_dma_t, GFP_KERNEL); + nic_info_addr = dma_alloc_coherent(&adapter->pdev->dev, nic_size, + &nic_dma_t, GFP_KERNEL); if (!nic_info_addr) return -ENOMEM; @@ -964,8 +964,8 @@ int qlcnic_82xx_get_pci_info(struct qlcnic_adapter *adapter, void *pci_info_addr; int err = 0, i; - pci_info_addr = dma_zalloc_coherent(&adapter->pdev->dev, pci_size, - &pci_info_dma_t, GFP_KERNEL); + pci_info_addr = dma_alloc_coherent(&adapter->pdev->dev, pci_size, + &pci_info_dma_t, GFP_KERNEL); if (!pci_info_addr) return -ENOMEM; @@ -1078,8 +1078,8 @@ int qlcnic_get_port_stats(struct qlcnic_adapter *adapter, const u8 func, return -EIO; } - stats_addr = dma_zalloc_coherent(&adapter->pdev->dev, stats_size, - &stats_dma_t, GFP_KERNEL); + stats_addr = dma_alloc_coherent(&adapter->pdev->dev, stats_size, + &stats_dma_t, GFP_KERNEL); if (!stats_addr) return -ENOMEM; @@ -1134,8 +1134,8 @@ int qlcnic_get_mac_stats(struct qlcnic_adapter *adapter, if (mac_stats == NULL) return -ENOMEM; - stats_addr = dma_zalloc_coherent(&adapter->pdev->dev, stats_size, - &stats_dma_t, GFP_KERNEL); + stats_addr = dma_alloc_coherent(&adapter->pdev->dev, stats_size, + &stats_dma_t, GFP_KERNEL); if (!stats_addr) return -ENOMEM; diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 031f6e6ee9c1..8d790313ee3d 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -776,7 +776,7 @@ int emac_mac_rx_tx_rings_alloc_all(struct emac_adapter *adpt) 8 + 2 * 8; /* 8 byte per one Tx and two Rx rings */ ring_header->used = 0; - ring_header->v_addr = dma_zalloc_coherent(dev, ring_header->size, + ring_header->v_addr = dma_alloc_coherent(dev, ring_header->size, &ring_header->dma_addr, GFP_KERNEL); if (!ring_header->v_addr) diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c index 690aee88f0eb..6d22dd500790 100644 --- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -400,9 +400,9 @@ static int init_tx_ring(struct device *dev, u8 queue_no, } /* allocate memory for TX descriptors */ - tx_ring->dma_tx = dma_zalloc_coherent(dev, - tx_rsize * sizeof(struct sxgbe_tx_norm_desc), - &tx_ring->dma_tx_phy, GFP_KERNEL); + tx_ring->dma_tx = dma_alloc_coherent(dev, + tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + &tx_ring->dma_tx_phy, GFP_KERNEL); if (!tx_ring->dma_tx) return -ENOMEM; @@ -479,9 +479,9 @@ static int init_rx_ring(struct net_device *dev, u8 queue_no, rx_ring->queue_no = queue_no; /* allocate memory for RX descriptors */ - rx_ring->dma_rx = dma_zalloc_coherent(priv->device, - rx_rsize * sizeof(struct sxgbe_rx_norm_desc), - &rx_ring->dma_rx_phy, GFP_KERNEL); + rx_ring->dma_rx = dma_alloc_coherent(priv->device, + rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + &rx_ring->dma_rx_phy, GFP_KERNEL); if (rx_ring->dma_rx == NULL) return -ENOMEM; diff --git a/drivers/net/ethernet/sfc/falcon/nic.c b/drivers/net/ethernet/sfc/falcon/nic.c index a8ecb33390da..9c07b5175581 100644 --- a/drivers/net/ethernet/sfc/falcon/nic.c +++ b/drivers/net/ethernet/sfc/falcon/nic.c @@ -33,8 +33,8 @@ int ef4_nic_alloc_buffer(struct ef4_nic *efx, struct ef4_buffer *buffer, unsigned int len, gfp_t gfp_flags) { - buffer->addr = dma_zalloc_coherent(&efx->pci_dev->dev, len, - &buffer->dma_addr, gfp_flags); + buffer->addr = dma_alloc_coherent(&efx->pci_dev->dev, len, + &buffer->dma_addr, gfp_flags); if (!buffer->addr) return -ENOMEM; buffer->len = len; diff --git a/drivers/net/ethernet/sfc/nic.c b/drivers/net/ethernet/sfc/nic.c index aa1945a858d5..c2d45a40eb48 100644 --- a/drivers/net/ethernet/sfc/nic.c +++ b/drivers/net/ethernet/sfc/nic.c @@ -34,8 +34,8 @@ int efx_nic_alloc_buffer(struct efx_nic *efx, struct efx_buffer *buffer, unsigned int len, gfp_t gfp_flags) { - buffer->addr = dma_zalloc_coherent(&efx->pci_dev->dev, len, - &buffer->dma_addr, gfp_flags); + buffer->addr = dma_alloc_coherent(&efx->pci_dev->dev, len, + &buffer->dma_addr, gfp_flags); if (!buffer->addr) return -ENOMEM; buffer->len = len; diff --git a/drivers/net/ethernet/sgi/meth.c b/drivers/net/ethernet/sgi/meth.c index 703fbbefea44..0e1b7e960b98 100644 --- a/drivers/net/ethernet/sgi/meth.c +++ b/drivers/net/ethernet/sgi/meth.c @@ -211,8 +211,8 @@ static void meth_check_link(struct net_device *dev) static int meth_init_tx_ring(struct meth_private *priv) { /* Init TX ring */ - priv->tx_ring = dma_zalloc_coherent(NULL, TX_RING_BUFFER_SIZE, - &priv->tx_ring_dma, GFP_ATOMIC); + priv->tx_ring = dma_alloc_coherent(NULL, TX_RING_BUFFER_SIZE, + &priv->tx_ring_dma, GFP_ATOMIC); if (!priv->tx_ring) return -ENOMEM; diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 05a0948ad929..a18149720aa2 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -1029,8 +1029,8 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id) struct netsec_desc_ring *dring = &priv->desc_ring[id]; int i; - dring->vaddr = dma_zalloc_coherent(priv->dev, DESC_SZ * DESC_NUM, - &dring->desc_dma, GFP_KERNEL); + dring->vaddr = dma_alloc_coherent(priv->dev, DESC_SZ * DESC_NUM, + &dring->desc_dma, GFP_KERNEL); if (!dring->vaddr) goto err; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 0e0a0789c2ed..0c4ab3444cc3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1549,22 +1549,18 @@ static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv) goto err_dma; if (priv->extend_desc) { - rx_q->dma_erx = dma_zalloc_coherent(priv->device, - DMA_RX_SIZE * - sizeof(struct - dma_extended_desc), - &rx_q->dma_rx_phy, - GFP_KERNEL); + rx_q->dma_erx = dma_alloc_coherent(priv->device, + DMA_RX_SIZE * sizeof(struct dma_extended_desc), + &rx_q->dma_rx_phy, + GFP_KERNEL); if (!rx_q->dma_erx) goto err_dma; } else { - rx_q->dma_rx = dma_zalloc_coherent(priv->device, - DMA_RX_SIZE * - sizeof(struct - dma_desc), - &rx_q->dma_rx_phy, - GFP_KERNEL); + rx_q->dma_rx = dma_alloc_coherent(priv->device, + DMA_RX_SIZE * sizeof(struct dma_desc), + &rx_q->dma_rx_phy, + GFP_KERNEL); if (!rx_q->dma_rx) goto err_dma; } @@ -1612,21 +1608,17 @@ static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv) goto err_dma; if (priv->extend_desc) { - tx_q->dma_etx = dma_zalloc_coherent(priv->device, - DMA_TX_SIZE * - sizeof(struct - dma_extended_desc), - &tx_q->dma_tx_phy, - GFP_KERNEL); + tx_q->dma_etx = dma_alloc_coherent(priv->device, + DMA_TX_SIZE * sizeof(struct dma_extended_desc), + &tx_q->dma_tx_phy, + GFP_KERNEL); if (!tx_q->dma_etx) goto err_dma; } else { - tx_q->dma_tx = dma_zalloc_coherent(priv->device, - DMA_TX_SIZE * - sizeof(struct - dma_desc), - &tx_q->dma_tx_phy, - GFP_KERNEL); + tx_q->dma_tx = dma_alloc_coherent(priv->device, + DMA_TX_SIZE * sizeof(struct dma_desc), + &tx_q->dma_tx_phy, + GFP_KERNEL); if (!tx_q->dma_tx) goto err_dma; } diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index edcd1e60b30d..37925a1d58de 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -1311,13 +1311,13 @@ static int tsi108_open(struct net_device *dev) data->id, dev->irq, dev->name); } - data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size, - &data->rxdma, GFP_KERNEL); + data->rxring = dma_alloc_coherent(&data->pdev->dev, rxring_size, + &data->rxdma, GFP_KERNEL); if (!data->rxring) return -ENOMEM; - data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size, - &data->txdma, GFP_KERNEL); + data->txring = dma_alloc_coherent(&data->pdev->dev, txring_size, + &data->txdma, GFP_KERNEL); if (!data->txring) { dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring, data->rxdma); diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 2241f9897092..15bb058db392 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -243,15 +243,15 @@ static int temac_dma_bd_init(struct net_device *ndev) /* allocate the tx and rx ring buffer descriptors. */ /* returns a virtual address and a physical address. */ - lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, - sizeof(*lp->tx_bd_v) * TX_BD_NUM, - &lp->tx_bd_p, GFP_KERNEL); + lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + &lp->tx_bd_p, GFP_KERNEL); if (!lp->tx_bd_v) goto out; - lp->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent, - sizeof(*lp->rx_bd_v) * RX_BD_NUM, - &lp->rx_bd_p, GFP_KERNEL); + lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + &lp->rx_bd_p, GFP_KERNEL); if (!lp->rx_bd_v) goto out; diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 12a14609ec47..0789d8af7d72 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -199,15 +199,15 @@ static int axienet_dma_bd_init(struct net_device *ndev) lp->rx_bd_ci = 0; /* Allocate the Tx and Rx buffer descriptors. */ - lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, - sizeof(*lp->tx_bd_v) * TX_BD_NUM, - &lp->tx_bd_p, GFP_KERNEL); + lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + &lp->tx_bd_p, GFP_KERNEL); if (!lp->tx_bd_v) goto out; - lp->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent, - sizeof(*lp->rx_bd_v) * RX_BD_NUM, - &lp->rx_bd_p, GFP_KERNEL); + lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + &lp->rx_bd_p, GFP_KERNEL); if (!lp->rx_bd_v) goto out; diff --git a/drivers/net/fddi/defxx.c b/drivers/net/fddi/defxx.c index 61fceee73c1b..38ac8ef41f5f 100644 --- a/drivers/net/fddi/defxx.c +++ b/drivers/net/fddi/defxx.c @@ -1139,9 +1139,9 @@ static int dfx_driver_init(struct net_device *dev, const char *print_name, #endif sizeof(PI_CONSUMER_BLOCK) + (PI_ALIGN_K_DESC_BLK - 1); - bp->kmalloced = top_v = dma_zalloc_coherent(bp->bus_dev, alloc_size, - &bp->kmalloced_dma, - GFP_ATOMIC); + bp->kmalloced = top_v = dma_alloc_coherent(bp->bus_dev, alloc_size, + &bp->kmalloced_dma, + GFP_ATOMIC); if (top_v == NULL) return DFX_K_FAILURE; diff --git a/drivers/net/fddi/skfp/skfddi.c b/drivers/net/fddi/skfp/skfddi.c index 72433f3efc74..5d661f60b101 100644 --- a/drivers/net/fddi/skfp/skfddi.c +++ b/drivers/net/fddi/skfp/skfddi.c @@ -409,10 +409,10 @@ static int skfp_driver_init(struct net_device *dev) if (bp->SharedMemSize > 0) { bp->SharedMemSize += 16; // for descriptor alignment - bp->SharedMemAddr = dma_zalloc_coherent(&bp->pdev.dev, - bp->SharedMemSize, - &bp->SharedMemDMA, - GFP_ATOMIC); + bp->SharedMemAddr = dma_alloc_coherent(&bp->pdev.dev, + bp->SharedMemSize, + &bp->SharedMemDMA, + GFP_ATOMIC); if (!bp->SharedMemAddr) { printk("could not allocate mem for "); printk("hardware module: %ld byte\n", diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index e454dfc9ad8f..89984fcab01e 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -535,8 +535,8 @@ vmxnet3_tq_create(struct vmxnet3_tx_queue *tq, } sz = tq->tx_ring.size * sizeof(tq->buf_info[0]); - tq->buf_info = dma_zalloc_coherent(&adapter->pdev->dev, sz, - &tq->buf_info_pa, GFP_KERNEL); + tq->buf_info = dma_alloc_coherent(&adapter->pdev->dev, sz, + &tq->buf_info_pa, GFP_KERNEL); if (!tq->buf_info) goto err; @@ -1815,8 +1815,8 @@ vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter) sz = sizeof(struct vmxnet3_rx_buf_info) * (rq->rx_ring[0].size + rq->rx_ring[1].size); - bi = dma_zalloc_coherent(&adapter->pdev->dev, sz, &rq->buf_info_pa, - GFP_KERNEL); + bi = dma_alloc_coherent(&adapter->pdev->dev, sz, &rq->buf_info_pa, + GFP_KERNEL); if (!bi) goto err; diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c index 839fa7715709..be6485428198 100644 --- a/drivers/net/wan/fsl_ucc_hdlc.c +++ b/drivers/net/wan/fsl_ucc_hdlc.c @@ -279,10 +279,9 @@ static int uhdlc_init(struct ucc_hdlc_private *priv) iowrite16be(DEFAULT_HDLC_ADDR, &priv->ucc_pram->haddr4); /* Get BD buffer */ - bd_buffer = dma_zalloc_coherent(priv->dev, - (RX_BD_RING_LEN + TX_BD_RING_LEN) * - MAX_RX_BUF_LENGTH, - &bd_dma_addr, GFP_KERNEL); + bd_buffer = dma_alloc_coherent(priv->dev, + (RX_BD_RING_LEN + TX_BD_RING_LEN) * MAX_RX_BUF_LENGTH, + &bd_dma_addr, GFP_KERNEL); if (!bd_buffer) { dev_err(priv->dev, "Could not allocate buffer descriptors\n"); diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index f6d3ecbdd3a3..2a5668b4f6bc 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -1553,10 +1553,9 @@ ath10k_ce_alloc_dest_ring(struct ath10k *ar, unsigned int ce_id, * coherent DMA are unsupported */ dest_ring->base_addr_owner_space_unaligned = - dma_zalloc_coherent(ar->dev, - (nentries * sizeof(struct ce_desc) + - CE_DESC_RING_ALIGN), - &base_addr, GFP_KERNEL); + dma_alloc_coherent(ar->dev, + (nentries * sizeof(struct ce_desc) + CE_DESC_RING_ALIGN), + &base_addr, GFP_KERNEL); if (!dest_ring->base_addr_owner_space_unaligned) { kfree(dest_ring); return ERR_PTR(-ENOMEM); diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index e49b36752ba2..49758490eaba 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5169,10 +5169,10 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, if (vif->type == NL80211_IFTYPE_ADHOC || vif->type == NL80211_IFTYPE_MESH_POINT || vif->type == NL80211_IFTYPE_AP) { - arvif->beacon_buf = dma_zalloc_coherent(ar->dev, - IEEE80211_MAX_FRAME_LEN, - &arvif->beacon_paddr, - GFP_ATOMIC); + arvif->beacon_buf = dma_alloc_coherent(ar->dev, + IEEE80211_MAX_FRAME_LEN, + &arvif->beacon_paddr, + GFP_ATOMIC); if (!arvif->beacon_buf) { ret = -ENOMEM; ath10k_warn(ar, "failed to allocate beacon buffer: %d\n", diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 01b4edb00e9e..39e0b1cc2a12 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -936,8 +936,7 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data, */ alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT); - data_buf = (unsigned char *)dma_zalloc_coherent(ar->dev, - alloc_nbytes, + data_buf = (unsigned char *)dma_alloc_coherent(ar->dev, alloc_nbytes, &ce_data_base, GFP_ATOMIC); diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index ba837403e266..8e236d158ca6 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5193,7 +5193,7 @@ static int ath10k_wmi_alloc_chunk(struct ath10k *ar, u32 req_id, void *vaddr; pool_size = num_units * round_up(unit_len, 4); - vaddr = dma_zalloc_coherent(ar->dev, pool_size, &paddr, GFP_KERNEL); + vaddr = dma_alloc_coherent(ar->dev, pool_size, &paddr, GFP_KERNEL); if (!vaddr) return -ENOMEM; diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c index 5ab3e31c9ffa..bab30f7a443c 100644 --- a/drivers/net/wireless/ath/wcn36xx/dxe.c +++ b/drivers/net/wireless/ath/wcn36xx/dxe.c @@ -174,9 +174,8 @@ static int wcn36xx_dxe_init_descs(struct device *dev, struct wcn36xx_dxe_ch *wcn int i; size = wcn_ch->desc_num * sizeof(struct wcn36xx_dxe_desc); - wcn_ch->cpu_addr = dma_zalloc_coherent(dev, size, - &wcn_ch->dma_addr, - GFP_KERNEL); + wcn_ch->cpu_addr = dma_alloc_coherent(dev, size, &wcn_ch->dma_addr, + GFP_KERNEL); if (!wcn_ch->cpu_addr) return -ENOMEM; @@ -627,9 +626,9 @@ int wcn36xx_dxe_allocate_mem_pools(struct wcn36xx *wcn) 16 - (WCN36XX_BD_CHUNK_SIZE % 8); s = wcn->mgmt_mem_pool.chunk_size * WCN36XX_DXE_CH_DESC_NUMB_TX_H; - cpu_addr = dma_zalloc_coherent(wcn->dev, s, - &wcn->mgmt_mem_pool.phy_addr, - GFP_KERNEL); + cpu_addr = dma_alloc_coherent(wcn->dev, s, + &wcn->mgmt_mem_pool.phy_addr, + GFP_KERNEL); if (!cpu_addr) goto out_err; @@ -642,9 +641,9 @@ int wcn36xx_dxe_allocate_mem_pools(struct wcn36xx *wcn) 16 - (WCN36XX_BD_CHUNK_SIZE % 8); s = wcn->data_mem_pool.chunk_size * WCN36XX_DXE_CH_DESC_NUMB_TX_L; - cpu_addr = dma_zalloc_coherent(wcn->dev, s, - &wcn->data_mem_pool.phy_addr, - GFP_KERNEL); + cpu_addr = dma_alloc_coherent(wcn->dev, s, + &wcn->data_mem_pool.phy_addr, + GFP_KERNEL); if (!cpu_addr) goto out_err; diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c index 05a8348bd7b9..3380aaef456c 100644 --- a/drivers/net/wireless/ath/wil6210/txrx_edma.c +++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c @@ -99,7 +99,7 @@ static int wil_sring_alloc(struct wil6210_priv *wil, /* Status messages are allocated and initialized to 0. This is necessary * since DR bit should be initialized to 0. */ - sring->va = dma_zalloc_coherent(dev, sz, &sring->pa, GFP_KERNEL); + sring->va = dma_alloc_coherent(dev, sz, &sring->pa, GFP_KERNEL); if (!sring->va) return -ENOMEM; @@ -381,15 +381,15 @@ static int wil_ring_alloc_desc_ring(struct wil6210_priv *wil, if (!ring->ctx) goto err; - ring->va = dma_zalloc_coherent(dev, sz, &ring->pa, GFP_KERNEL); + ring->va = dma_alloc_coherent(dev, sz, &ring->pa, GFP_KERNEL); if (!ring->va) goto err_free_ctx; if (ring->is_rx) { sz = sizeof(*ring->edma_rx_swtail.va); ring->edma_rx_swtail.va = - dma_zalloc_coherent(dev, sz, &ring->edma_rx_swtail.pa, - GFP_KERNEL); + dma_alloc_coherent(dev, sz, &ring->edma_rx_swtail.pa, + GFP_KERNEL); if (!ring->edma_rx_swtail.va) goto err_free_va; } diff --git a/drivers/net/wireless/broadcom/b43/dma.c b/drivers/net/wireless/broadcom/b43/dma.c index dfc4c34298d4..b34e51933257 100644 --- a/drivers/net/wireless/broadcom/b43/dma.c +++ b/drivers/net/wireless/broadcom/b43/dma.c @@ -431,9 +431,9 @@ static int alloc_ringmemory(struct b43_dmaring *ring) u16 ring_mem_size = (ring->type == B43_DMA_64BIT) ? B43_DMA64_RINGMEMSIZE : B43_DMA32_RINGMEMSIZE; - ring->descbase = dma_zalloc_coherent(ring->dev->dev->dma_dev, - ring_mem_size, &(ring->dmabase), - GFP_KERNEL); + ring->descbase = dma_alloc_coherent(ring->dev->dev->dma_dev, + ring_mem_size, &(ring->dmabase), + GFP_KERNEL); if (!ring->descbase) return -ENOMEM; diff --git a/drivers/net/wireless/broadcom/b43legacy/dma.c b/drivers/net/wireless/broadcom/b43legacy/dma.c index 1b1da7d83652..2ce1537d983c 100644 --- a/drivers/net/wireless/broadcom/b43legacy/dma.c +++ b/drivers/net/wireless/broadcom/b43legacy/dma.c @@ -331,9 +331,9 @@ void free_descriptor_buffer(struct b43legacy_dmaring *ring, static int alloc_ringmemory(struct b43legacy_dmaring *ring) { /* GFP flags must match the flags in free_ringmemory()! */ - ring->descbase = dma_zalloc_coherent(ring->dev->dev->dma_dev, - B43legacy_DMA_RINGMEMSIZE, - &(ring->dmabase), GFP_KERNEL); + ring->descbase = dma_alloc_coherent(ring->dev->dev->dma_dev, + B43legacy_DMA_RINGMEMSIZE, + &(ring->dmabase), GFP_KERNEL); if (!ring->descbase) return -ENOMEM; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 16d7dda965d8..0f69b3fa296e 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -1281,10 +1281,10 @@ static int brcmf_pcie_init_scratchbuffers(struct brcmf_pciedev_info *devinfo) u32 addr; devinfo->shared.scratch = - dma_zalloc_coherent(&devinfo->pdev->dev, - BRCMF_DMA_D2H_SCRATCH_BUF_LEN, - &devinfo->shared.scratch_dmahandle, - GFP_KERNEL); + dma_alloc_coherent(&devinfo->pdev->dev, + BRCMF_DMA_D2H_SCRATCH_BUF_LEN, + &devinfo->shared.scratch_dmahandle, + GFP_KERNEL); if (!devinfo->shared.scratch) goto fail; @@ -1298,10 +1298,10 @@ static int brcmf_pcie_init_scratchbuffers(struct brcmf_pciedev_info *devinfo) brcmf_pcie_write_tcm32(devinfo, addr, BRCMF_DMA_D2H_SCRATCH_BUF_LEN); devinfo->shared.ringupd = - dma_zalloc_coherent(&devinfo->pdev->dev, - BRCMF_DMA_D2H_RINGUPD_BUF_LEN, - &devinfo->shared.ringupd_dmahandle, - GFP_KERNEL); + dma_alloc_coherent(&devinfo->pdev->dev, + BRCMF_DMA_D2H_RINGUPD_BUF_LEN, + &devinfo->shared.ringupd_dmahandle, + GFP_KERNEL); if (!devinfo->shared.ringupd) goto fail; diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c index e965cc588850..9e850c25877b 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c @@ -711,30 +711,24 @@ static int iwl_pcie_alloc_rxq_dma(struct iwl_trans *trans, * Allocate the circular buffer of Read Buffer Descriptors * (RBDs) */ - rxq->bd = dma_zalloc_coherent(dev, - free_size * rxq->queue_size, - &rxq->bd_dma, GFP_KERNEL); + rxq->bd = dma_alloc_coherent(dev, free_size * rxq->queue_size, + &rxq->bd_dma, GFP_KERNEL); if (!rxq->bd) goto err; if (trans->cfg->mq_rx_supported) { - rxq->used_bd = dma_zalloc_coherent(dev, - (use_rx_td ? - sizeof(*rxq->cd) : - sizeof(__le32)) * - rxq->queue_size, - &rxq->used_bd_dma, - GFP_KERNEL); + rxq->used_bd = dma_alloc_coherent(dev, + (use_rx_td ? sizeof(*rxq->cd) : sizeof(__le32)) * rxq->queue_size, + &rxq->used_bd_dma, + GFP_KERNEL); if (!rxq->used_bd) goto err; } /* Allocate the driver's pointer to receive buffer status */ - rxq->rb_stts = dma_zalloc_coherent(dev, use_rx_td ? - sizeof(__le16) : - sizeof(struct iwl_rb_status), - &rxq->rb_stts_dma, - GFP_KERNEL); + rxq->rb_stts = dma_alloc_coherent(dev, + use_rx_td ? sizeof(__le16) : sizeof(struct iwl_rb_status), + &rxq->rb_stts_dma, GFP_KERNEL); if (!rxq->rb_stts) goto err; @@ -742,16 +736,14 @@ static int iwl_pcie_alloc_rxq_dma(struct iwl_trans *trans, return 0; /* Allocate the driver's pointer to TR tail */ - rxq->tr_tail = dma_zalloc_coherent(dev, sizeof(__le16), - &rxq->tr_tail_dma, - GFP_KERNEL); + rxq->tr_tail = dma_alloc_coherent(dev, sizeof(__le16), + &rxq->tr_tail_dma, GFP_KERNEL); if (!rxq->tr_tail) goto err; /* Allocate the driver's pointer to CR tail */ - rxq->cr_tail = dma_zalloc_coherent(dev, sizeof(__le16), - &rxq->cr_tail_dma, - GFP_KERNEL); + rxq->cr_tail = dma_alloc_coherent(dev, sizeof(__le16), + &rxq->cr_tail_dma, GFP_KERNEL); if (!rxq->cr_tail) goto err; /* @@ -1947,9 +1939,8 @@ int iwl_pcie_alloc_ict(struct iwl_trans *trans) struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); trans_pcie->ict_tbl = - dma_zalloc_coherent(trans->dev, ICT_SIZE, - &trans_pcie->ict_tbl_dma, - GFP_KERNEL); + dma_alloc_coherent(trans->dev, ICT_SIZE, + &trans_pcie->ict_tbl_dma, GFP_KERNEL); if (!trans_pcie->ict_tbl) return -ENOMEM; diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c b/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c index 528cb0401df1..4956a54151cb 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.c @@ -119,9 +119,9 @@ static int rt2x00mmio_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, /* * Allocate DMA memory for descriptor and buffer. */ - addr = dma_zalloc_coherent(rt2x00dev->dev, - queue->limit * queue->desc_size, &dma, - GFP_KERNEL); + addr = dma_alloc_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, &dma, + GFP_KERNEL); if (!addr) return -ENOMEM; diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c index 5ee5f40b4dfc..f1eaa3c4d46a 100644 --- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c +++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c @@ -1339,10 +1339,10 @@ static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev) int rc; sndev->nr_rsvd_luts++; - sndev->self_shared = dma_zalloc_coherent(&sndev->stdev->pdev->dev, - LUT_SIZE, - &sndev->self_shared_dma, - GFP_KERNEL); + sndev->self_shared = dma_alloc_coherent(&sndev->stdev->pdev->dev, + LUT_SIZE, + &sndev->self_shared_dma, + GFP_KERNEL); if (!sndev->self_shared) { dev_err(&sndev->stdev->dev, "unable to allocate memory for shared mw\n"); diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 5a0bf6a24d50..e8d0942c9c92 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1485,8 +1485,8 @@ static int nvme_alloc_queue(struct nvme_dev *dev, int qid, int depth) if (dev->ctrl.queue_count > qid) return 0; - nvmeq->cqes = dma_zalloc_coherent(dev->dev, CQ_SIZE(depth), - &nvmeq->cq_dma_addr, GFP_KERNEL); + nvmeq->cqes = dma_alloc_coherent(dev->dev, CQ_SIZE(depth), + &nvmeq->cq_dma_addr, GFP_KERNEL); if (!nvmeq->cqes) goto free_nvmeq; @@ -1915,8 +1915,8 @@ static int __nvme_alloc_host_mem(struct nvme_dev *dev, u64 preferred, if (dev->ctrl.hmmaxd && dev->ctrl.hmmaxd < max_entries) max_entries = dev->ctrl.hmmaxd; - descs = dma_zalloc_coherent(dev->dev, max_entries * sizeof(*descs), - &descs_dma, GFP_KERNEL); + descs = dma_alloc_coherent(dev->dev, max_entries * sizeof(*descs), + &descs_dma, GFP_KERNEL); if (!descs) goto out; diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c index 9deb56989d72..cb3401a931f8 100644 --- a/drivers/pci/controller/pcie-iproc-msi.c +++ b/drivers/pci/controller/pcie-iproc-msi.c @@ -602,9 +602,9 @@ int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node) } /* Reserve memory for event queue and make sure memories are zeroed */ - msi->eq_cpu = dma_zalloc_coherent(pcie->dev, - msi->nr_eq_region * EQ_MEM_REGION_SIZE, - &msi->eq_dma, GFP_KERNEL); + msi->eq_cpu = dma_alloc_coherent(pcie->dev, + msi->nr_eq_region * EQ_MEM_REGION_SIZE, + &msi->eq_dma, GFP_KERNEL); if (!msi->eq_cpu) { ret = -ENOMEM; goto free_irqs; diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index 6c5536d3d42a..e22766c79fe9 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -1373,10 +1373,10 @@ static int switchtec_init_pci(struct switchtec_dev *stdev, if (ioread32(&stdev->mmio_mrpc->dma_ver) == 0) return 0; - stdev->dma_mrpc = dma_zalloc_coherent(&stdev->pdev->dev, - sizeof(*stdev->dma_mrpc), - &stdev->dma_mrpc_dma_addr, - GFP_KERNEL); + stdev->dma_mrpc = dma_alloc_coherent(&stdev->pdev->dev, + sizeof(*stdev->dma_mrpc), + &stdev->dma_mrpc_dma_addr, + GFP_KERNEL); if (stdev->dma_mrpc == NULL) return -ENOMEM; diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index bb655854713d..b64c56c33c3b 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -1382,9 +1382,9 @@ static int tsi721_doorbell_init(struct tsi721_device *priv) INIT_WORK(&priv->idb_work, tsi721_db_dpc); /* Allocate buffer for inbound doorbells queue */ - priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, - IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, - &priv->idb_dma, GFP_KERNEL); + priv->idb_base = dma_alloc_coherent(&priv->pdev->dev, + IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, + &priv->idb_dma, GFP_KERNEL); if (!priv->idb_base) return -ENOMEM; @@ -1447,9 +1447,9 @@ static int tsi721_bdma_maint_init(struct tsi721_device *priv) regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT); /* Allocate space for DMA descriptors */ - bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, - bd_num * sizeof(struct tsi721_dma_desc), - &bd_phys, GFP_KERNEL); + bd_ptr = dma_alloc_coherent(&priv->pdev->dev, + bd_num * sizeof(struct tsi721_dma_desc), + &bd_phys, GFP_KERNEL); if (!bd_ptr) return -ENOMEM; @@ -1464,7 +1464,7 @@ static int tsi721_bdma_maint_init(struct tsi721_device *priv) sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? bd_num : TSI721_DMA_MINSTSSZ; sts_size = roundup_pow_of_two(sts_size); - sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, + sts_ptr = dma_alloc_coherent(&priv->pdev->dev, sts_size * sizeof(struct tsi721_dma_sts), &sts_phys, GFP_KERNEL); if (!sts_ptr) { @@ -1939,10 +1939,10 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, /* Outbound message descriptor status FIFO allocation */ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); - priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, - priv->omsg_ring[mbox].sts_size * - sizeof(struct tsi721_dma_sts), - &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); + priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), + &priv->omsg_ring[mbox].sts_phys, + GFP_KERNEL); if (priv->omsg_ring[mbox].sts_base == NULL) { tsi_debug(OMSG, &priv->pdev->dev, "ENOMEM for OB_MSG_%d status FIFO", mbox); diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c index 006ea5a45020..7f5d4436f594 100644 --- a/drivers/rapidio/devices/tsi721_dma.c +++ b/drivers/rapidio/devices/tsi721_dma.c @@ -90,9 +90,9 @@ static int tsi721_bdma_ch_init(struct tsi721_bdma_chan *bdma_chan, int bd_num) * Allocate space for DMA descriptors * (add an extra element for link descriptor) */ - bd_ptr = dma_zalloc_coherent(dev, - (bd_num + 1) * sizeof(struct tsi721_dma_desc), - &bd_phys, GFP_ATOMIC); + bd_ptr = dma_alloc_coherent(dev, + (bd_num + 1) * sizeof(struct tsi721_dma_desc), + &bd_phys, GFP_ATOMIC); if (!bd_ptr) return -ENOMEM; @@ -108,7 +108,7 @@ static int tsi721_bdma_ch_init(struct tsi721_bdma_chan *bdma_chan, int bd_num) sts_size = ((bd_num + 1) >= TSI721_DMA_MINSTSSZ) ? (bd_num + 1) : TSI721_DMA_MINSTSSZ; sts_size = roundup_pow_of_two(sts_size); - sts_ptr = dma_zalloc_coherent(dev, + sts_ptr = dma_alloc_coherent(dev, sts_size * sizeof(struct tsi721_dma_sts), &sts_phys, GFP_ATOMIC); if (!sts_ptr) { diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index dcbf5c857743..ed8e58f09054 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -89,8 +89,8 @@ static int register_sba(struct ism_dev *ism) dma_addr_t dma_handle; struct ism_sba *sba; - sba = dma_zalloc_coherent(&ism->pdev->dev, PAGE_SIZE, - &dma_handle, GFP_KERNEL); + sba = dma_alloc_coherent(&ism->pdev->dev, PAGE_SIZE, &dma_handle, + GFP_KERNEL); if (!sba) return -ENOMEM; @@ -116,8 +116,8 @@ static int register_ieq(struct ism_dev *ism) dma_addr_t dma_handle; struct ism_eq *ieq; - ieq = dma_zalloc_coherent(&ism->pdev->dev, PAGE_SIZE, - &dma_handle, GFP_KERNEL); + ieq = dma_alloc_coherent(&ism->pdev->dev, PAGE_SIZE, &dma_handle, + GFP_KERNEL); if (!ieq) return -ENOMEM; @@ -234,10 +234,9 @@ static int ism_alloc_dmb(struct ism_dev *ism, struct smcd_dmb *dmb) test_and_set_bit(dmb->sba_idx, ism->sba_bitmap)) return -EINVAL; - dmb->cpu_addr = dma_zalloc_coherent(&ism->pdev->dev, dmb->dmb_len, - &dmb->dma_addr, GFP_KERNEL | - __GFP_NOWARN | __GFP_NOMEMALLOC | - __GFP_COMP | __GFP_NORETRY); + dmb->cpu_addr = dma_alloc_coherent(&ism->pdev->dev, dmb->dmb_len, + &dmb->dma_addr, + GFP_KERNEL | __GFP_NOWARN | __GFP_NOMEMALLOC | __GFP_COMP | __GFP_NORETRY); if (!dmb->cpu_addr) clear_bit(dmb->sba_idx, ism->sba_bitmap); diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c index e8f5f7c63190..cd096104bcec 100644 --- a/drivers/scsi/3w-sas.c +++ b/drivers/scsi/3w-sas.c @@ -646,8 +646,9 @@ static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which) unsigned long *cpu_addr; int retval = 1; - cpu_addr = dma_zalloc_coherent(&tw_dev->tw_pci_dev->dev, - size * TW_Q_LENGTH, &dma_handle, GFP_KERNEL); + cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, + size * TW_Q_LENGTH, &dma_handle, + GFP_KERNEL); if (!cpu_addr) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed"); goto out; diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index ff53fd0d12f2..66c514310f3c 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -1123,8 +1123,8 @@ static int inia100_probe_one(struct pci_dev *pdev, /* Get total memory needed for SCB */ sz = ORC_MAXQUEUE * sizeof(struct orc_scb); - host->scb_virt = dma_zalloc_coherent(&pdev->dev, sz, &host->scb_phys, - GFP_KERNEL); + host->scb_virt = dma_alloc_coherent(&pdev->dev, sz, &host->scb_phys, + GFP_KERNEL); if (!host->scb_virt) { printk("inia100: SCB memory allocation error\n"); goto out_host_put; @@ -1132,8 +1132,8 @@ static int inia100_probe_one(struct pci_dev *pdev, /* Get total memory needed for ESCB */ sz = ORC_MAXQUEUE * sizeof(struct orc_extended_scb); - host->escb_virt = dma_zalloc_coherent(&pdev->dev, sz, &host->escb_phys, - GFP_KERNEL); + host->escb_virt = dma_alloc_coherent(&pdev->dev, sz, &host->escb_phys, + GFP_KERNEL); if (!host->escb_virt) { printk("inia100: ESCB memory allocation error\n"); goto out_free_scb_array; diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 0f6751b0a633..57c6fa388bf6 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -587,8 +587,10 @@ static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb) case ACB_ADAPTER_TYPE_B: { struct MessageUnit_B *reg; acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_B), 32); - dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize, - &dma_coherent_handle, GFP_KERNEL); + dma_coherent = dma_alloc_coherent(&pdev->dev, + acb->roundup_ccbsize, + &dma_coherent_handle, + GFP_KERNEL); if (!dma_coherent) { pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no); return false; @@ -617,8 +619,10 @@ static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb) struct MessageUnit_D *reg; acb->roundup_ccbsize = roundup(sizeof(struct MessageUnit_D), 32); - dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize, - &dma_coherent_handle, GFP_KERNEL); + dma_coherent = dma_alloc_coherent(&pdev->dev, + acb->roundup_ccbsize, + &dma_coherent_handle, + GFP_KERNEL); if (!dma_coherent) { pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no); return false; @@ -659,8 +663,10 @@ static bool arcmsr_alloc_io_queue(struct AdapterControlBlock *acb) uint32_t completeQ_size; completeQ_size = sizeof(struct deliver_completeQ) * ARCMSR_MAX_HBE_DONEQUEUE + 128; acb->roundup_ccbsize = roundup(completeQ_size, 32); - dma_coherent = dma_zalloc_coherent(&pdev->dev, acb->roundup_ccbsize, - &dma_coherent_handle, GFP_KERNEL); + dma_coherent = dma_alloc_coherent(&pdev->dev, + acb->roundup_ccbsize, + &dma_coherent_handle, + GFP_KERNEL); if (!dma_coherent){ pr_notice("arcmsr%d: DMA allocation failed\n", acb->host->host_no); return false; diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c index 39f3820572b4..74e260027c7d 100644 --- a/drivers/scsi/be2iscsi/be_main.c +++ b/drivers/scsi/be2iscsi/be_main.c @@ -3321,8 +3321,8 @@ static int be_queue_alloc(struct beiscsi_hba *phba, struct be_queue_info *q, q->len = len; q->entry_size = entry_size; mem->size = len * entry_size; - mem->va = dma_zalloc_coherent(&phba->pcidev->dev, mem->size, &mem->dma, - GFP_KERNEL); + mem->va = dma_alloc_coherent(&phba->pcidev->dev, mem->size, &mem->dma, + GFP_KERNEL); if (!mem->va) return -ENOMEM; return 0; diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c index ca7b7bbc8371..d4febaadfaa3 100644 --- a/drivers/scsi/be2iscsi/be_mgmt.c +++ b/drivers/scsi/be2iscsi/be_mgmt.c @@ -293,8 +293,8 @@ static int beiscsi_prep_nemb_cmd(struct beiscsi_hba *phba, struct be_dma_mem *cmd, u8 subsystem, u8 opcode, u32 size) { - cmd->va = dma_zalloc_coherent(&phba->ctrl.pdev->dev, size, &cmd->dma, - GFP_KERNEL); + cmd->va = dma_alloc_coherent(&phba->ctrl.pdev->dev, size, &cmd->dma, + GFP_KERNEL); if (!cmd->va) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG, "BG_%d : Failed to allocate memory for if info\n"); @@ -1510,10 +1510,9 @@ int beiscsi_mgmt_invalidate_icds(struct beiscsi_hba *phba, return -EINVAL; nonemb_cmd.size = sizeof(union be_invldt_cmds_params); - nonemb_cmd.va = dma_zalloc_coherent(&phba->ctrl.pdev->dev, - nonemb_cmd.size, - &nonemb_cmd.dma, - GFP_KERNEL); + nonemb_cmd.va = dma_alloc_coherent(&phba->ctrl.pdev->dev, + nonemb_cmd.size, &nonemb_cmd.dma, + GFP_KERNEL); if (!nonemb_cmd.va) { beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_EH, "BM_%d : invldt_cmds_params alloc failed\n"); diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 5d163ca1b366..d8e6d7480f35 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -3264,9 +3264,9 @@ bfad_fcxp_map_sg(struct bfad_s *bfad, void *payload_kbuf, /* Allocate dma coherent memory */ buf_info = buf_base; buf_info->size = payload_len; - buf_info->virt = dma_zalloc_coherent(&bfad->pcidev->dev, - buf_info->size, &buf_info->phys, - GFP_KERNEL); + buf_info->virt = dma_alloc_coherent(&bfad->pcidev->dev, + buf_info->size, &buf_info->phys, + GFP_KERNEL); if (!buf_info->virt) goto out_free_mem; diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c index e8ae4d671d23..039328d9ef13 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c +++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c @@ -1857,10 +1857,10 @@ int bnx2fc_setup_task_ctx(struct bnx2fc_hba *hba) * entries. Hence the limit with one page is 8192 task context * entries. */ - hba->task_ctx_bd_tbl = dma_zalloc_coherent(&hba->pcidev->dev, - PAGE_SIZE, - &hba->task_ctx_bd_dma, - GFP_KERNEL); + hba->task_ctx_bd_tbl = dma_alloc_coherent(&hba->pcidev->dev, + PAGE_SIZE, + &hba->task_ctx_bd_dma, + GFP_KERNEL); if (!hba->task_ctx_bd_tbl) { printk(KERN_ERR PFX "unable to allocate task context BDT\n"); rc = -1; @@ -1894,10 +1894,10 @@ int bnx2fc_setup_task_ctx(struct bnx2fc_hba *hba) task_ctx_bdt = (struct regpair *)hba->task_ctx_bd_tbl; for (i = 0; i < task_ctx_arr_sz; i++) { - hba->task_ctx[i] = dma_zalloc_coherent(&hba->pcidev->dev, - PAGE_SIZE, - &hba->task_ctx_dma[i], - GFP_KERNEL); + hba->task_ctx[i] = dma_alloc_coherent(&hba->pcidev->dev, + PAGE_SIZE, + &hba->task_ctx_dma[i], + GFP_KERNEL); if (!hba->task_ctx[i]) { printk(KERN_ERR PFX "unable to alloc task context\n"); rc = -1; @@ -2031,19 +2031,19 @@ static int bnx2fc_allocate_hash_table(struct bnx2fc_hba *hba) } for (i = 0; i < segment_count; ++i) { - hba->hash_tbl_segments[i] = dma_zalloc_coherent(&hba->pcidev->dev, - BNX2FC_HASH_TBL_CHUNK_SIZE, - &dma_segment_array[i], - GFP_KERNEL); + hba->hash_tbl_segments[i] = dma_alloc_coherent(&hba->pcidev->dev, + BNX2FC_HASH_TBL_CHUNK_SIZE, + &dma_segment_array[i], + GFP_KERNEL); if (!hba->hash_tbl_segments[i]) { printk(KERN_ERR PFX "hash segment alloc failed\n"); goto cleanup_dma; } } - hba->hash_tbl_pbl = dma_zalloc_coherent(&hba->pcidev->dev, PAGE_SIZE, - &hba->hash_tbl_pbl_dma, - GFP_KERNEL); + hba->hash_tbl_pbl = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE, + &hba->hash_tbl_pbl_dma, + GFP_KERNEL); if (!hba->hash_tbl_pbl) { printk(KERN_ERR PFX "hash table pbl alloc failed\n"); goto cleanup_dma; @@ -2104,10 +2104,9 @@ int bnx2fc_setup_fw_resc(struct bnx2fc_hba *hba) return -ENOMEM; mem_size = BNX2FC_NUM_MAX_SESS * sizeof(struct regpair); - hba->t2_hash_tbl_ptr = dma_zalloc_coherent(&hba->pcidev->dev, - mem_size, - &hba->t2_hash_tbl_ptr_dma, - GFP_KERNEL); + hba->t2_hash_tbl_ptr = dma_alloc_coherent(&hba->pcidev->dev, mem_size, + &hba->t2_hash_tbl_ptr_dma, + GFP_KERNEL); if (!hba->t2_hash_tbl_ptr) { printk(KERN_ERR PFX "unable to allocate t2 hash table ptr\n"); bnx2fc_free_fw_resc(hba); @@ -2116,9 +2115,9 @@ int bnx2fc_setup_fw_resc(struct bnx2fc_hba *hba) mem_size = BNX2FC_NUM_MAX_SESS * sizeof(struct fcoe_t2_hash_table_entry); - hba->t2_hash_tbl = dma_zalloc_coherent(&hba->pcidev->dev, mem_size, - &hba->t2_hash_tbl_dma, - GFP_KERNEL); + hba->t2_hash_tbl = dma_alloc_coherent(&hba->pcidev->dev, mem_size, + &hba->t2_hash_tbl_dma, + GFP_KERNEL); if (!hba->t2_hash_tbl) { printk(KERN_ERR PFX "unable to allocate t2 hash table\n"); bnx2fc_free_fw_resc(hba); @@ -2140,9 +2139,9 @@ int bnx2fc_setup_fw_resc(struct bnx2fc_hba *hba) return -ENOMEM; } - hba->stats_buffer = dma_zalloc_coherent(&hba->pcidev->dev, PAGE_SIZE, - &hba->stats_buf_dma, - GFP_KERNEL); + hba->stats_buffer = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE, + &hba->stats_buf_dma, + GFP_KERNEL); if (!hba->stats_buffer) { printk(KERN_ERR PFX "unable to alloc Stats Buffer\n"); bnx2fc_free_fw_resc(hba); diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c index e3d1c7c440c8..d735e87e416a 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c +++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c @@ -672,8 +672,8 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->sq_mem_size = (tgt->sq_mem_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->sq = dma_zalloc_coherent(&hba->pcidev->dev, tgt->sq_mem_size, - &tgt->sq_dma, GFP_KERNEL); + tgt->sq = dma_alloc_coherent(&hba->pcidev->dev, tgt->sq_mem_size, + &tgt->sq_dma, GFP_KERNEL); if (!tgt->sq) { printk(KERN_ERR PFX "unable to allocate SQ memory %d\n", tgt->sq_mem_size); @@ -685,8 +685,8 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->cq_mem_size = (tgt->cq_mem_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->cq = dma_zalloc_coherent(&hba->pcidev->dev, tgt->cq_mem_size, - &tgt->cq_dma, GFP_KERNEL); + tgt->cq = dma_alloc_coherent(&hba->pcidev->dev, tgt->cq_mem_size, + &tgt->cq_dma, GFP_KERNEL); if (!tgt->cq) { printk(KERN_ERR PFX "unable to allocate CQ memory %d\n", tgt->cq_mem_size); @@ -698,8 +698,8 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->rq_mem_size = (tgt->rq_mem_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->rq = dma_zalloc_coherent(&hba->pcidev->dev, tgt->rq_mem_size, - &tgt->rq_dma, GFP_KERNEL); + tgt->rq = dma_alloc_coherent(&hba->pcidev->dev, tgt->rq_mem_size, + &tgt->rq_dma, GFP_KERNEL); if (!tgt->rq) { printk(KERN_ERR PFX "unable to allocate RQ memory %d\n", tgt->rq_mem_size); @@ -710,8 +710,8 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->rq_pbl_size = (tgt->rq_pbl_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->rq_pbl = dma_zalloc_coherent(&hba->pcidev->dev, tgt->rq_pbl_size, - &tgt->rq_pbl_dma, GFP_KERNEL); + tgt->rq_pbl = dma_alloc_coherent(&hba->pcidev->dev, tgt->rq_pbl_size, + &tgt->rq_pbl_dma, GFP_KERNEL); if (!tgt->rq_pbl) { printk(KERN_ERR PFX "unable to allocate RQ PBL %d\n", tgt->rq_pbl_size); @@ -735,9 +735,9 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->xferq_mem_size = (tgt->xferq_mem_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->xferq = dma_zalloc_coherent(&hba->pcidev->dev, - tgt->xferq_mem_size, &tgt->xferq_dma, - GFP_KERNEL); + tgt->xferq = dma_alloc_coherent(&hba->pcidev->dev, + tgt->xferq_mem_size, &tgt->xferq_dma, + GFP_KERNEL); if (!tgt->xferq) { printk(KERN_ERR PFX "unable to allocate XFERQ %d\n", tgt->xferq_mem_size); @@ -749,9 +749,9 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->confq_mem_size = (tgt->confq_mem_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->confq = dma_zalloc_coherent(&hba->pcidev->dev, - tgt->confq_mem_size, &tgt->confq_dma, - GFP_KERNEL); + tgt->confq = dma_alloc_coherent(&hba->pcidev->dev, + tgt->confq_mem_size, &tgt->confq_dma, + GFP_KERNEL); if (!tgt->confq) { printk(KERN_ERR PFX "unable to allocate CONFQ %d\n", tgt->confq_mem_size); @@ -763,9 +763,9 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->confq_pbl_size = (tgt->confq_pbl_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->confq_pbl = dma_zalloc_coherent(&hba->pcidev->dev, - tgt->confq_pbl_size, - &tgt->confq_pbl_dma, GFP_KERNEL); + tgt->confq_pbl = dma_alloc_coherent(&hba->pcidev->dev, + tgt->confq_pbl_size, + &tgt->confq_pbl_dma, GFP_KERNEL); if (!tgt->confq_pbl) { printk(KERN_ERR PFX "unable to allocate CONFQ PBL %d\n", tgt->confq_pbl_size); @@ -787,9 +787,9 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, /* Allocate and map ConnDB */ tgt->conn_db_mem_size = sizeof(struct fcoe_conn_db); - tgt->conn_db = dma_zalloc_coherent(&hba->pcidev->dev, - tgt->conn_db_mem_size, - &tgt->conn_db_dma, GFP_KERNEL); + tgt->conn_db = dma_alloc_coherent(&hba->pcidev->dev, + tgt->conn_db_mem_size, + &tgt->conn_db_dma, GFP_KERNEL); if (!tgt->conn_db) { printk(KERN_ERR PFX "unable to allocate conn_db %d\n", tgt->conn_db_mem_size); @@ -802,8 +802,8 @@ static int bnx2fc_alloc_session_resc(struct bnx2fc_hba *hba, tgt->lcq_mem_size = (tgt->lcq_mem_size + (CNIC_PAGE_SIZE - 1)) & CNIC_PAGE_MASK; - tgt->lcq = dma_zalloc_coherent(&hba->pcidev->dev, tgt->lcq_mem_size, - &tgt->lcq_dma, GFP_KERNEL); + tgt->lcq = dma_alloc_coherent(&hba->pcidev->dev, tgt->lcq_mem_size, + &tgt->lcq_dma, GFP_KERNEL); if (!tgt->lcq) { printk(KERN_ERR PFX "unable to allocate lcq %d\n", diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 91f5316aa3ab..fae6f71e677d 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1070,8 +1070,8 @@ int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep) /* Allocate memory area for actual SQ element */ ep->qp.sq_virt = - dma_zalloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size, - &ep->qp.sq_phys, GFP_KERNEL); + dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size, + &ep->qp.sq_phys, GFP_KERNEL); if (!ep->qp.sq_virt) { printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n", ep->qp.sq_mem_size); @@ -1106,8 +1106,8 @@ int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep) /* Allocate memory area for actual CQ element */ ep->qp.cq_virt = - dma_zalloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size, - &ep->qp.cq_phys, GFP_KERNEL); + dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size, + &ep->qp.cq_phys, GFP_KERNEL); if (!ep->qp.cq_virt) { printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n", ep->qp.cq_mem_size); diff --git a/drivers/scsi/csiostor/csio_wr.c b/drivers/scsi/csiostor/csio_wr.c index dc12933533d5..66bbd21819ae 100644 --- a/drivers/scsi/csiostor/csio_wr.c +++ b/drivers/scsi/csiostor/csio_wr.c @@ -233,8 +233,8 @@ csio_wr_alloc_q(struct csio_hw *hw, uint32_t qsize, uint32_t wrsize, q = wrm->q_arr[free_idx]; - q->vstart = dma_zalloc_coherent(&hw->pdev->dev, qsz, &q->pstart, - GFP_KERNEL); + q->vstart = dma_alloc_coherent(&hw->pdev->dev, qsz, &q->pstart, + GFP_KERNEL); if (!q->vstart) { csio_err(hw, "Failed to allocate DMA memory for " diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 8698af86485d..2dc564e59430 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -2730,8 +2730,8 @@ lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba) INIT_LIST_HEAD(&dmabuf->list); /* now, allocate dma buffer */ - dmabuf->virt = dma_zalloc_coherent(&pcidev->dev, BSG_MBOX_SIZE, - &(dmabuf->phys), GFP_KERNEL); + dmabuf->virt = dma_alloc_coherent(&pcidev->dev, BSG_MBOX_SIZE, + &(dmabuf->phys), GFP_KERNEL); if (!dmabuf->virt) { kfree(dmabuf); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index c1c36812c3d2..bede11e16349 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -6973,9 +6973,9 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) if (!dmabuf) return NULL; - dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev, - LPFC_HDR_TEMPLATE_SIZE, - &dmabuf->phys, GFP_KERNEL); + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, + LPFC_HDR_TEMPLATE_SIZE, + &dmabuf->phys, GFP_KERNEL); if (!dmabuf->virt) { rpi_hdr = NULL; goto err_free_dmabuf; @@ -7397,8 +7397,8 @@ lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) } /* Allocate memory for SLI-2 structures */ - phba->slim2p.virt = dma_zalloc_coherent(&pdev->dev, SLI2_SLIM_SIZE, - &phba->slim2p.phys, GFP_KERNEL); + phba->slim2p.virt = dma_alloc_coherent(&pdev->dev, SLI2_SLIM_SIZE, + &phba->slim2p.phys, GFP_KERNEL); if (!phba->slim2p.virt) goto out_iounmap; @@ -7816,8 +7816,8 @@ lpfc_create_bootstrap_mbox(struct lpfc_hba *phba) * plus an alignment restriction of 16 bytes. */ bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1); - dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev, bmbx_size, - &dmabuf->phys, GFP_KERNEL); + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, bmbx_size, + &dmabuf->phys, GFP_KERNEL); if (!dmabuf->virt) { kfree(dmabuf); return -ENOMEM; diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index f6a5083a621e..4d3b94317515 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1827,9 +1827,9 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, * page, this is used as a priori size of SLI4_PAGE_SIZE for * the later DMA memory free. */ - viraddr = dma_zalloc_coherent(&phba->pcidev->dev, - SLI4_PAGE_SIZE, &phyaddr, - GFP_KERNEL); + viraddr = dma_alloc_coherent(&phba->pcidev->dev, + SLI4_PAGE_SIZE, &phyaddr, + GFP_KERNEL); /* In case of malloc fails, proceed with whatever we have */ if (!viraddr) break; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 30734caf77e1..12fd74761ae0 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -5362,8 +5362,8 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, * mailbox command. */ dma_size = *vpd_size; - dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev, dma_size, - &dmabuf->phys, GFP_KERNEL); + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, dma_size, + &dmabuf->phys, GFP_KERNEL); if (!dmabuf->virt) { kfree(dmabuf); return -ENOMEM; @@ -6300,10 +6300,9 @@ lpfc_sli4_ras_dma_alloc(struct lpfc_hba *phba, goto free_mem; } - dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev, + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, LPFC_RAS_MAX_ENTRY_SIZE, - &dmabuf->phys, - GFP_KERNEL); + &dmabuf->phys, GFP_KERNEL); if (!dmabuf->virt) { kfree(dmabuf); rc = -ENOMEM; @@ -14613,9 +14612,9 @@ lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t page_size, dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); if (!dmabuf) goto out_fail; - dmabuf->virt = dma_zalloc_coherent(&phba->pcidev->dev, - hw_page_size, &dmabuf->phys, - GFP_KERNEL); + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, + hw_page_size, &dmabuf->phys, + GFP_KERNEL); if (!dmabuf->virt) { kfree(dmabuf); goto out_fail; diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e836392b75e8..f112458023ff 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -967,9 +967,10 @@ megaraid_alloc_cmd_packets(adapter_t *adapter) * Allocate the common 16-byte aligned memory for the handshake * mailbox. */ - raid_dev->una_mbox64 = dma_zalloc_coherent(&adapter->pdev->dev, - sizeof(mbox64_t), &raid_dev->una_mbox64_dma, - GFP_KERNEL); + raid_dev->una_mbox64 = dma_alloc_coherent(&adapter->pdev->dev, + sizeof(mbox64_t), + &raid_dev->una_mbox64_dma, + GFP_KERNEL); if (!raid_dev->una_mbox64) { con_log(CL_ANN, (KERN_WARNING @@ -995,8 +996,8 @@ megaraid_alloc_cmd_packets(adapter_t *adapter) align; // Allocate memory for commands issued internally - adapter->ibuf = dma_zalloc_coherent(&pdev->dev, MBOX_IBUF_SIZE, - &adapter->ibuf_dma_h, GFP_KERNEL); + adapter->ibuf = dma_alloc_coherent(&pdev->dev, MBOX_IBUF_SIZE, + &adapter->ibuf_dma_h, GFP_KERNEL); if (!adapter->ibuf) { con_log(CL_ANN, (KERN_WARNING @@ -2897,8 +2898,8 @@ megaraid_mbox_product_info(adapter_t *adapter) * Issue an ENQUIRY3 command to find out certain adapter parameters, * e.g., max channels, max commands etc. */ - pinfo = dma_zalloc_coherent(&adapter->pdev->dev, sizeof(mraid_pinfo_t), - &pinfo_dma_h, GFP_KERNEL); + pinfo = dma_alloc_coherent(&adapter->pdev->dev, sizeof(mraid_pinfo_t), + &pinfo_dma_h, GFP_KERNEL); if (pinfo == NULL) { con_log(CL_ANN, (KERN_WARNING "megaraid: out of memory, %s %d\n", __func__, diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index f7bdd783360a..7eaa400f6328 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2273,9 +2273,9 @@ static int megasas_get_ld_vf_affiliation_111(struct megasas_instance *instance, sizeof(struct MR_LD_VF_AFFILIATION_111)); else { new_affiliation_111 = - dma_zalloc_coherent(&instance->pdev->dev, - sizeof(struct MR_LD_VF_AFFILIATION_111), - &new_affiliation_111_h, GFP_KERNEL); + dma_alloc_coherent(&instance->pdev->dev, + sizeof(struct MR_LD_VF_AFFILIATION_111), + &new_affiliation_111_h, GFP_KERNEL); if (!new_affiliation_111) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate " "memory for new affiliation for scsi%d\n", @@ -2380,10 +2380,9 @@ static int megasas_get_ld_vf_affiliation_12(struct megasas_instance *instance, sizeof(struct MR_LD_VF_AFFILIATION)); else { new_affiliation = - dma_zalloc_coherent(&instance->pdev->dev, - (MAX_LOGICAL_DRIVES + 1) * - sizeof(struct MR_LD_VF_AFFILIATION), - &new_affiliation_h, GFP_KERNEL); + dma_alloc_coherent(&instance->pdev->dev, + (MAX_LOGICAL_DRIVES + 1) * sizeof(struct MR_LD_VF_AFFILIATION), + &new_affiliation_h, GFP_KERNEL); if (!new_affiliation) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate " "memory for new affiliation for scsi%d\n", @@ -2546,9 +2545,10 @@ int megasas_sriov_start_heartbeat(struct megasas_instance *instance, if (initial) { instance->hb_host_mem = - dma_zalloc_coherent(&instance->pdev->dev, - sizeof(struct MR_CTRL_HB_HOST_MEM), - &instance->hb_host_mem_h, GFP_KERNEL); + dma_alloc_coherent(&instance->pdev->dev, + sizeof(struct MR_CTRL_HB_HOST_MEM), + &instance->hb_host_mem_h, + GFP_KERNEL); if (!instance->hb_host_mem) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "SR-IOV: Couldn't allocate" " memory for heartbeat host memory for scsi%d\n", @@ -5816,9 +5816,9 @@ megasas_get_seq_num(struct megasas_instance *instance, } dcmd = &cmd->frame->dcmd; - el_info = dma_zalloc_coherent(&instance->pdev->dev, - sizeof(struct megasas_evt_log_info), &el_info_h, - GFP_KERNEL); + el_info = dma_alloc_coherent(&instance->pdev->dev, + sizeof(struct megasas_evt_log_info), + &el_info_h, GFP_KERNEL); if (!el_info) { megasas_return_cmd(instance, cmd); return -ENOMEM; diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 211c17c33aa0..a9a25f0eaf6f 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -689,8 +689,9 @@ megasas_alloc_rdpq_fusion(struct megasas_instance *instance) array_size = sizeof(struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY) * MAX_MSIX_QUEUES_FUSION; - fusion->rdpq_virt = dma_zalloc_coherent(&instance->pdev->dev, - array_size, &fusion->rdpq_phys, GFP_KERNEL); + fusion->rdpq_virt = dma_alloc_coherent(&instance->pdev->dev, + array_size, &fusion->rdpq_phys, + GFP_KERNEL); if (!fusion->rdpq_virt) { dev_err(&instance->pdev->dev, "Failed from %s %d\n", __func__, __LINE__); diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c index f3e182eb0970..c9dc7740e9e7 100644 --- a/drivers/scsi/mesh.c +++ b/drivers/scsi/mesh.c @@ -1915,8 +1915,9 @@ static int mesh_probe(struct macio_dev *mdev, const struct of_device_id *match) /* We use the PCI APIs for now until the generic one gets fixed * enough or until we get some macio-specific versions */ - dma_cmd_space = dma_zalloc_coherent(&macio_get_pci_dev(mdev)->dev, - ms->dma_cmd_size, &dma_cmd_bus, GFP_KERNEL); + dma_cmd_space = dma_alloc_coherent(&macio_get_pci_dev(mdev)->dev, + ms->dma_cmd_size, &dma_cmd_bus, + GFP_KERNEL); if (dma_cmd_space == NULL) { printk(KERN_ERR "mesh: can't allocate DMA table\n"); goto out_unmap; diff --git a/drivers/scsi/mvumi.c b/drivers/scsi/mvumi.c index dbe753fba486..36f64205ecfa 100644 --- a/drivers/scsi/mvumi.c +++ b/drivers/scsi/mvumi.c @@ -143,8 +143,9 @@ static struct mvumi_res *mvumi_alloc_mem_resource(struct mvumi_hba *mhba, case RESOURCE_UNCACHED_MEMORY: size = round_up(size, 8); - res->virt_addr = dma_zalloc_coherent(&mhba->pdev->dev, size, - &res->bus_addr, GFP_KERNEL); + res->virt_addr = dma_alloc_coherent(&mhba->pdev->dev, size, + &res->bus_addr, + GFP_KERNEL); if (!res->virt_addr) { dev_err(&mhba->pdev->dev, "unable to allocate consistent mem," @@ -246,8 +247,8 @@ static int mvumi_internal_cmd_sgl(struct mvumi_hba *mhba, struct mvumi_cmd *cmd, if (size == 0) return 0; - virt_addr = dma_zalloc_coherent(&mhba->pdev->dev, size, &phy_addr, - GFP_KERNEL); + virt_addr = dma_alloc_coherent(&mhba->pdev->dev, size, &phy_addr, + GFP_KERNEL); if (!virt_addr) return -1; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index b3be49d41375..4c5a3d23e010 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -116,8 +116,8 @@ int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, u64 align_offset = 0; if (align) align_offset = (dma_addr_t)align - 1; - mem_virt_alloc = dma_zalloc_coherent(&pdev->dev, mem_size + align, - &mem_dma_handle, GFP_KERNEL); + mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align, + &mem_dma_handle, GFP_KERNEL); if (!mem_virt_alloc) { pm8001_printk("memory allocation error\n"); return -1; diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index edcaf4b0cb0b..9bbc19fc190b 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -1050,16 +1050,17 @@ static int qedf_alloc_sq(struct qedf_ctx *qedf, struct qedf_rport *fcport) sizeof(void *); fcport->sq_pbl_size = fcport->sq_pbl_size + QEDF_PAGE_SIZE; - fcport->sq = dma_zalloc_coherent(&qedf->pdev->dev, - fcport->sq_mem_size, &fcport->sq_dma, GFP_KERNEL); + fcport->sq = dma_alloc_coherent(&qedf->pdev->dev, fcport->sq_mem_size, + &fcport->sq_dma, GFP_KERNEL); if (!fcport->sq) { QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate send queue.\n"); rval = 1; goto out; } - fcport->sq_pbl = dma_zalloc_coherent(&qedf->pdev->dev, - fcport->sq_pbl_size, &fcport->sq_pbl_dma, GFP_KERNEL); + fcport->sq_pbl = dma_alloc_coherent(&qedf->pdev->dev, + fcport->sq_pbl_size, + &fcport->sq_pbl_dma, GFP_KERNEL); if (!fcport->sq_pbl) { QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate send queue PBL.\n"); rval = 1; @@ -2680,8 +2681,10 @@ static int qedf_alloc_bdq(struct qedf_ctx *qedf) } /* Allocate list of PBL pages */ - qedf->bdq_pbl_list = dma_zalloc_coherent(&qedf->pdev->dev, - QEDF_PAGE_SIZE, &qedf->bdq_pbl_list_dma, GFP_KERNEL); + qedf->bdq_pbl_list = dma_alloc_coherent(&qedf->pdev->dev, + QEDF_PAGE_SIZE, + &qedf->bdq_pbl_list_dma, + GFP_KERNEL); if (!qedf->bdq_pbl_list) { QEDF_ERR(&(qedf->dbg_ctx), "Could not allocate list of PBL pages.\n"); return -ENOMEM; @@ -2770,9 +2773,10 @@ static int qedf_alloc_global_queues(struct qedf_ctx *qedf) ALIGN(qedf->global_queues[i]->cq_pbl_size, QEDF_PAGE_SIZE); qedf->global_queues[i]->cq = - dma_zalloc_coherent(&qedf->pdev->dev, - qedf->global_queues[i]->cq_mem_size, - &qedf->global_queues[i]->cq_dma, GFP_KERNEL); + dma_alloc_coherent(&qedf->pdev->dev, + qedf->global_queues[i]->cq_mem_size, + &qedf->global_queues[i]->cq_dma, + GFP_KERNEL); if (!qedf->global_queues[i]->cq) { QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate cq.\n"); @@ -2781,9 +2785,10 @@ static int qedf_alloc_global_queues(struct qedf_ctx *qedf) } qedf->global_queues[i]->cq_pbl = - dma_zalloc_coherent(&qedf->pdev->dev, - qedf->global_queues[i]->cq_pbl_size, - &qedf->global_queues[i]->cq_pbl_dma, GFP_KERNEL); + dma_alloc_coherent(&qedf->pdev->dev, + qedf->global_queues[i]->cq_pbl_size, + &qedf->global_queues[i]->cq_pbl_dma, + GFP_KERNEL); if (!qedf->global_queues[i]->cq_pbl) { QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate cq PBL.\n"); diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 5c53409a8cea..e74a62448ba4 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -1394,10 +1394,9 @@ static int qedi_alloc_nvm_iscsi_cfg(struct qedi_ctx *qedi) { struct qedi_nvm_iscsi_image nvm_image; - qedi->iscsi_image = dma_zalloc_coherent(&qedi->pdev->dev, - sizeof(nvm_image), - &qedi->nvm_buf_dma, - GFP_KERNEL); + qedi->iscsi_image = dma_alloc_coherent(&qedi->pdev->dev, + sizeof(nvm_image), + &qedi->nvm_buf_dma, GFP_KERNEL); if (!qedi->iscsi_image) { QEDI_ERR(&qedi->dbg_ctx, "Could not allocate NVM BUF.\n"); return -ENOMEM; @@ -1510,10 +1509,10 @@ static int qedi_alloc_bdq(struct qedi_ctx *qedi) } /* Allocate list of PBL pages */ - qedi->bdq_pbl_list = dma_zalloc_coherent(&qedi->pdev->dev, - QEDI_PAGE_SIZE, - &qedi->bdq_pbl_list_dma, - GFP_KERNEL); + qedi->bdq_pbl_list = dma_alloc_coherent(&qedi->pdev->dev, + QEDI_PAGE_SIZE, + &qedi->bdq_pbl_list_dma, + GFP_KERNEL); if (!qedi->bdq_pbl_list) { QEDI_ERR(&qedi->dbg_ctx, "Could not allocate list of PBL pages.\n"); @@ -1609,10 +1608,10 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi) (qedi->global_queues[i]->cq_pbl_size + (QEDI_PAGE_SIZE - 1)); - qedi->global_queues[i]->cq = dma_zalloc_coherent(&qedi->pdev->dev, - qedi->global_queues[i]->cq_mem_size, - &qedi->global_queues[i]->cq_dma, - GFP_KERNEL); + qedi->global_queues[i]->cq = dma_alloc_coherent(&qedi->pdev->dev, + qedi->global_queues[i]->cq_mem_size, + &qedi->global_queues[i]->cq_dma, + GFP_KERNEL); if (!qedi->global_queues[i]->cq) { QEDI_WARN(&qedi->dbg_ctx, @@ -1620,10 +1619,10 @@ static int qedi_alloc_global_queues(struct qedi_ctx *qedi) status = -ENOMEM; goto mem_alloc_failure; } - qedi->global_queues[i]->cq_pbl = dma_zalloc_coherent(&qedi->pdev->dev, - qedi->global_queues[i]->cq_pbl_size, - &qedi->global_queues[i]->cq_pbl_dma, - GFP_KERNEL); + qedi->global_queues[i]->cq_pbl = dma_alloc_coherent(&qedi->pdev->dev, + qedi->global_queues[i]->cq_pbl_size, + &qedi->global_queues[i]->cq_pbl_dma, + GFP_KERNEL); if (!qedi->global_queues[i]->cq_pbl) { QEDI_WARN(&qedi->dbg_ctx, @@ -1691,16 +1690,16 @@ int qedi_alloc_sq(struct qedi_ctx *qedi, struct qedi_endpoint *ep) ep->sq_pbl_size = (ep->sq_mem_size / QEDI_PAGE_SIZE) * sizeof(void *); ep->sq_pbl_size = ep->sq_pbl_size + QEDI_PAGE_SIZE; - ep->sq = dma_zalloc_coherent(&qedi->pdev->dev, ep->sq_mem_size, - &ep->sq_dma, GFP_KERNEL); + ep->sq = dma_alloc_coherent(&qedi->pdev->dev, ep->sq_mem_size, + &ep->sq_dma, GFP_KERNEL); if (!ep->sq) { QEDI_WARN(&qedi->dbg_ctx, "Could not allocate send queue.\n"); rval = -ENOMEM; goto out; } - ep->sq_pbl = dma_zalloc_coherent(&qedi->pdev->dev, ep->sq_pbl_size, - &ep->sq_pbl_dma, GFP_KERNEL); + ep->sq_pbl = dma_alloc_coherent(&qedi->pdev->dev, ep->sq_pbl_size, + &ep->sq_pbl_dma, GFP_KERNEL); if (!ep->sq_pbl) { QEDI_WARN(&qedi->dbg_ctx, "Could not allocate send queue PBL.\n"); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 00444dc79756..ac504a1ff0ff 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -2415,8 +2415,8 @@ qla2x00_get_fc_host_stats(struct Scsi_Host *shost) if (qla2x00_chip_is_down(vha)) goto done; - stats = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*stats), - &stats_dma, GFP_KERNEL); + stats = dma_alloc_coherent(&ha->pdev->dev, sizeof(*stats), &stats_dma, + GFP_KERNEL); if (!stats) { ql_log(ql_log_warn, vha, 0x707d, "Failed to allocate memory for stats.\n"); diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 4a9fd8d944d6..17d42658ad9a 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -2312,8 +2312,8 @@ qla2x00_get_priv_stats(struct bsg_job *bsg_job) if (!IS_FWI2_CAPABLE(ha)) return -EPERM; - stats = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*stats), - &stats_dma, GFP_KERNEL); + stats = dma_alloc_coherent(&ha->pdev->dev, sizeof(*stats), &stats_dma, + GFP_KERNEL); if (!stats) { ql_log(ql_log_warn, vha, 0x70e2, "Failed to allocate memory for stats.\n"); diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 90cfa394f942..cbc3bc49d4d1 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -4147,9 +4147,10 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) return rval; } - sp->u.iocb_cmd.u.ctarg.req = dma_zalloc_coherent( - &vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), - &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, + sizeof(struct ct_sns_pkt), + &sp->u.iocb_cmd.u.ctarg.req_dma, + GFP_KERNEL); sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xffff, @@ -4165,9 +4166,10 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) ((vha->hw->max_fibre_devices - 1) * sizeof(struct ct_sns_gpn_ft_data)); - sp->u.iocb_cmd.u.ctarg.rsp = dma_zalloc_coherent( - &vha->hw->pdev->dev, rspsz, - &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, + rspsz, + &sp->u.iocb_cmd.u.ctarg.rsp_dma, + GFP_KERNEL); sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xffff, diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 364bb52ed2a6..aeeb0144bd55 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3099,8 +3099,8 @@ qla2x00_alloc_offload_mem(scsi_qla_host_t *vha) FCE_SIZE, ha->fce, ha->fce_dma); /* Allocate memory for Fibre Channel Event Buffer. */ - tc = dma_zalloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, - GFP_KERNEL); + tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, + GFP_KERNEL); if (!tc) { ql_log(ql_log_warn, vha, 0x00be, "Unable to allocate (%d KB) for FCE.\n", @@ -3131,8 +3131,8 @@ try_eft: EFT_SIZE, ha->eft, ha->eft_dma); /* Allocate memory for Extended Trace Buffer. */ - tc = dma_zalloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma, - GFP_KERNEL); + tc = dma_alloc_coherent(&ha->pdev->dev, EFT_SIZE, &tc_dma, + GFP_KERNEL); if (!tc) { ql_log(ql_log_warn, vha, 0x00c1, "Unable to allocate (%d KB) for EFT.\n", diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 1ef74aa2d00a..2bf5e3e639e1 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -153,8 +153,8 @@ int qla4xxx_get_sys_info(struct scsi_qla_host *ha) dma_addr_t sys_info_dma; int status = QLA_ERROR; - sys_info = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*sys_info), - &sys_info_dma, GFP_KERNEL); + sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info), + &sys_info_dma, GFP_KERNEL); if (sys_info == NULL) { DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", ha->host_no, __func__)); diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 5d56904687b9..dac9a7013208 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -625,9 +625,9 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha) uint32_t mbox_sts[MBOX_REG_COUNT]; int status = QLA_ERROR; - init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev, - sizeof(struct addr_ctrl_blk), - &init_fw_cb_dma, GFP_KERNEL); + init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct addr_ctrl_blk), + &init_fw_cb_dma, GFP_KERNEL); if (init_fw_cb == NULL) { DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no, __func__)); @@ -709,9 +709,9 @@ int qla4xxx_get_dhcp_ip_address(struct scsi_qla_host * ha) uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; - init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev, - sizeof(struct addr_ctrl_blk), - &init_fw_cb_dma, GFP_KERNEL); + init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct addr_ctrl_blk), + &init_fw_cb_dma, GFP_KERNEL); if (init_fw_cb == NULL) { printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no, __func__); @@ -1340,9 +1340,9 @@ int qla4xxx_about_firmware(struct scsi_qla_host *ha) uint32_t mbox_sts[MBOX_REG_COUNT]; int status = QLA_ERROR; - about_fw = dma_zalloc_coherent(&ha->pdev->dev, - sizeof(struct about_fw_info), - &about_fw_dma, GFP_KERNEL); + about_fw = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct about_fw_info), + &about_fw_dma, GFP_KERNEL); if (!about_fw) { DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory " "for about_fw\n", __func__)); diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index d2b333d629be..5a31877c9d04 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -4052,8 +4052,8 @@ int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha) dma_addr_t sys_info_dma; int status = QLA_ERROR; - sys_info = dma_zalloc_coherent(&ha->pdev->dev, sizeof(*sys_info), - &sys_info_dma, GFP_KERNEL); + sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info), + &sys_info_dma, GFP_KERNEL); if (sys_info == NULL) { DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", ha->host_no, __func__)); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 949e186cc5d7..cfdfcda28072 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -2704,9 +2704,9 @@ qla4xxx_iface_set_param(struct Scsi_Host *shost, void *data, uint32_t len) uint32_t rem = len; struct nlattr *attr; - init_fw_cb = dma_zalloc_coherent(&ha->pdev->dev, - sizeof(struct addr_ctrl_blk), - &init_fw_cb_dma, GFP_KERNEL); + init_fw_cb = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct addr_ctrl_blk), + &init_fw_cb_dma, GFP_KERNEL); if (!init_fw_cb) { ql4_printk(KERN_ERR, ha, "%s: Unable to alloc init_cb\n", __func__); @@ -4206,8 +4206,8 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha) sizeof(struct shadow_regs) + MEM_ALIGN_VALUE + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); - ha->queues = dma_zalloc_coherent(&ha->pdev->dev, ha->queues_len, - &ha->queues_dma, GFP_KERNEL); + ha->queues = dma_alloc_coherent(&ha->pdev->dev, ha->queues_len, + &ha->queues_dma, GFP_KERNEL); if (ha->queues == NULL) { ql4_printk(KERN_WARNING, ha, "Memory Allocation failed - queues.\n"); diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index e2fa3f476227..7bde6c809442 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -3576,9 +3576,9 @@ static int pqi_alloc_operational_queues(struct pqi_ctrl_info *ctrl_info) alloc_length += PQI_EXTRA_SGL_MEMORY; ctrl_info->queue_memory_base = - dma_zalloc_coherent(&ctrl_info->pci_dev->dev, - alloc_length, - &ctrl_info->queue_memory_base_dma_handle, GFP_KERNEL); + dma_alloc_coherent(&ctrl_info->pci_dev->dev, alloc_length, + &ctrl_info->queue_memory_base_dma_handle, + GFP_KERNEL); if (!ctrl_info->queue_memory_base) return -ENOMEM; @@ -3715,10 +3715,9 @@ static int pqi_alloc_admin_queues(struct pqi_ctrl_info *ctrl_info) PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT; ctrl_info->admin_queue_memory_base = - dma_zalloc_coherent(&ctrl_info->pci_dev->dev, - alloc_length, - &ctrl_info->admin_queue_memory_base_dma_handle, - GFP_KERNEL); + dma_alloc_coherent(&ctrl_info->pci_dev->dev, alloc_length, + &ctrl_info->admin_queue_memory_base_dma_handle, + GFP_KERNEL); if (!ctrl_info->admin_queue_memory_base) return -ENOMEM; @@ -4602,9 +4601,10 @@ static void pqi_free_all_io_requests(struct pqi_ctrl_info *ctrl_info) static inline int pqi_alloc_error_buffer(struct pqi_ctrl_info *ctrl_info) { - ctrl_info->error_buffer = dma_zalloc_coherent(&ctrl_info->pci_dev->dev, - ctrl_info->error_buffer_length, - &ctrl_info->error_buffer_dma_handle, GFP_KERNEL); + ctrl_info->error_buffer = dma_alloc_coherent(&ctrl_info->pci_dev->dev, + ctrl_info->error_buffer_length, + &ctrl_info->error_buffer_dma_handle, + GFP_KERNEL); if (!ctrl_info->error_buffer) return -ENOMEM; @@ -7487,8 +7487,8 @@ static int pqi_ofa_alloc_mem(struct pqi_ctrl_info *ctrl_info, dma_addr_t dma_handle; ctrl_info->pqi_ofa_chunk_virt_addr[i] = - dma_zalloc_coherent(dev, chunk_size, &dma_handle, - GFP_KERNEL); + dma_alloc_coherent(dev, chunk_size, &dma_handle, + GFP_KERNEL); if (!ctrl_info->pqi_ofa_chunk_virt_addr[i]) break; @@ -7545,10 +7545,10 @@ static void pqi_ofa_setup_host_buffer(struct pqi_ctrl_info *ctrl_info, struct device *dev; dev = &ctrl_info->pci_dev->dev; - pqi_ofa_memory = dma_zalloc_coherent(dev, - PQI_OFA_MEMORY_DESCRIPTOR_LENGTH, - &ctrl_info->pqi_ofa_mem_dma_handle, - GFP_KERNEL); + pqi_ofa_memory = dma_alloc_coherent(dev, + PQI_OFA_MEMORY_DESCRIPTOR_LENGTH, + &ctrl_info->pqi_ofa_mem_dma_handle, + GFP_KERNEL); if (!pqi_ofa_memory) return; diff --git a/drivers/soc/fsl/qbman/dpaa_sys.c b/drivers/soc/fsl/qbman/dpaa_sys.c index 9436aa83ff1b..e6d48dccb8d5 100644 --- a/drivers/soc/fsl/qbman/dpaa_sys.c +++ b/drivers/soc/fsl/qbman/dpaa_sys.c @@ -62,7 +62,7 @@ int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr, return -ENODEV; } - if (!dma_zalloc_coherent(dev, *size, addr, 0)) { + if (!dma_alloc_coherent(dev, *size, addr, 0)) { dev_err(dev, "DMA Alloc memory failed\n"); return -ENODEV; } diff --git a/drivers/spi/spi-pic32-sqi.c b/drivers/spi/spi-pic32-sqi.c index d7e4e18ec3df..1ae9af5f17ec 100644 --- a/drivers/spi/spi-pic32-sqi.c +++ b/drivers/spi/spi-pic32-sqi.c @@ -466,9 +466,9 @@ static int ring_desc_ring_alloc(struct pic32_sqi *sqi) int i; /* allocate coherent DMAable memory for hardware buffer descriptors. */ - sqi->bd = dma_zalloc_coherent(&sqi->master->dev, - sizeof(*bd) * PESQI_BD_COUNT, - &sqi->bd_dma, GFP_KERNEL); + sqi->bd = dma_alloc_coherent(&sqi->master->dev, + sizeof(*bd) * PESQI_BD_COUNT, + &sqi->bd_dma, GFP_KERNEL); if (!sqi->bd) { dev_err(&sqi->master->dev, "failed allocating dma buffer\n"); return -ENOMEM; diff --git a/drivers/staging/mt7621-eth/mtk_eth_soc.c b/drivers/staging/mt7621-eth/mtk_eth_soc.c index 21a76a8ccc26..6027b19f7bc2 100644 --- a/drivers/staging/mt7621-eth/mtk_eth_soc.c +++ b/drivers/staging/mt7621-eth/mtk_eth_soc.c @@ -1396,8 +1396,7 @@ static int mtk_qdma_tx_alloc_tx(struct mtk_eth *eth) if (!ring->tx_buf) goto no_tx_mem; - ring->tx_dma = dma_zalloc_coherent(eth->dev, - ring->tx_ring_size * sz, + ring->tx_dma = dma_alloc_coherent(eth->dev, ring->tx_ring_size * sz, &ring->tx_phys, GFP_ATOMIC | __GFP_ZERO); if (!ring->tx_dma) diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c index 338b6e952515..dd4898861b83 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_2835_arm.c @@ -407,10 +407,8 @@ create_pagelist(char __user *buf, size_t count, unsigned short type) /* Allocate enough storage to hold the page pointers and the page * list */ - pagelist = dma_zalloc_coherent(g_dev, - pagelist_size, - &dma_addr, - GFP_KERNEL); + pagelist = dma_alloc_coherent(g_dev, pagelist_size, &dma_addr, + GFP_KERNEL); vchiq_log_trace(vchiq_arm_log_level, "%s - %pK", __func__, pagelist); diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c index 1ab0e8562d40..c9097e7367d8 100644 --- a/drivers/staging/vt6655/device_main.c +++ b/drivers/staging/vt6655/device_main.c @@ -440,12 +440,9 @@ static bool device_init_rings(struct vnt_private *priv) void *vir_pool; /*allocate all RD/TD rings a single pool*/ - vir_pool = dma_zalloc_coherent(&priv->pcid->dev, - priv->opts.rx_descs0 * sizeof(struct vnt_rx_desc) + - priv->opts.rx_descs1 * sizeof(struct vnt_rx_desc) + - priv->opts.tx_descs[0] * sizeof(struct vnt_tx_desc) + - priv->opts.tx_descs[1] * sizeof(struct vnt_tx_desc), - &priv->pool_dma, GFP_ATOMIC); + vir_pool = dma_alloc_coherent(&priv->pcid->dev, + priv->opts.rx_descs0 * sizeof(struct vnt_rx_desc) + priv->opts.rx_descs1 * sizeof(struct vnt_rx_desc) + priv->opts.tx_descs[0] * sizeof(struct vnt_tx_desc) + priv->opts.tx_descs[1] * sizeof(struct vnt_tx_desc), + &priv->pool_dma, GFP_ATOMIC); if (!vir_pool) { dev_err(&priv->pcid->dev, "allocate desc dma memory failed\n"); return false; @@ -459,13 +456,9 @@ static bool device_init_rings(struct vnt_private *priv) priv->rd1_pool_dma = priv->rd0_pool_dma + priv->opts.rx_descs0 * sizeof(struct vnt_rx_desc); - priv->tx0_bufs = dma_zalloc_coherent(&priv->pcid->dev, - priv->opts.tx_descs[0] * PKT_BUF_SZ + - priv->opts.tx_descs[1] * PKT_BUF_SZ + - CB_BEACON_BUF_SIZE + - CB_MAX_BUF_SIZE, - &priv->tx_bufs_dma0, - GFP_ATOMIC); + priv->tx0_bufs = dma_alloc_coherent(&priv->pcid->dev, + priv->opts.tx_descs[0] * PKT_BUF_SZ + priv->opts.tx_descs[1] * PKT_BUF_SZ + CB_BEACON_BUF_SIZE + CB_MAX_BUF_SIZE, + &priv->tx_bufs_dma0, GFP_ATOMIC); if (!priv->tx0_bufs) { dev_err(&priv->pcid->dev, "allocate buf dma memory failed\n"); diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c index 01b44e159623..ccbd1d34eb2a 100644 --- a/drivers/usb/gadget/udc/bdc/bdc_core.c +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -172,8 +172,9 @@ static int scratchpad_setup(struct bdc *bdc) /* Refer to BDC spec, Table 4 for description of SPB */ sp_buff_size = 1 << (sp_buff_size + 5); dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size); - bdc->scratchpad.buff = dma_zalloc_coherent(bdc->dev, sp_buff_size, - &bdc->scratchpad.sp_dma, GFP_KERNEL); + bdc->scratchpad.buff = dma_alloc_coherent(bdc->dev, sp_buff_size, + &bdc->scratchpad.sp_dma, + GFP_KERNEL); if (!bdc->scratchpad.buff) goto fail; @@ -202,11 +203,9 @@ static int setup_srr(struct bdc *bdc, int interrupter) bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST); bdc->srr.dqp_index = 0; /* allocate the status report descriptors */ - bdc->srr.sr_bds = dma_zalloc_coherent( - bdc->dev, - NUM_SR_ENTRIES * sizeof(struct bdc_bd), - &bdc->srr.dma_addr, - GFP_KERNEL); + bdc->srr.sr_bds = dma_alloc_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + &bdc->srr.dma_addr, GFP_KERNEL); if (!bdc->srr.sr_bds) return -ENOMEM; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6218bfe54f52..98deb5f64268 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -596,9 +596,9 @@ static int uhci_start(struct usb_hcd *hcd) &uhci_debug_operations); #endif - uhci->frame = dma_zalloc_coherent(uhci_dev(uhci), - UHCI_NUMFRAMES * sizeof(*uhci->frame), - &uhci->frame_dma_handle, GFP_KERNEL); + uhci->frame = dma_alloc_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + &uhci->frame_dma_handle, GFP_KERNEL); if (!uhci->frame) { dev_err(uhci_dev(uhci), "unable to allocate consistent memory for frame list\n"); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 36a3eb8849f1..8067f178fa84 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1672,8 +1672,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); for (i = 0; i < num_sp; i++) { dma_addr_t dma; - void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma, - flags); + void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, + flags); if (!buf) goto fail_sp4; @@ -1799,8 +1799,8 @@ int xhci_alloc_erst(struct xhci_hcd *xhci, struct xhci_erst_entry *entry; size = sizeof(struct xhci_erst_entry) * evt_ring->num_segs; - erst->entries = dma_zalloc_coherent(xhci_to_hcd(xhci)->self.sysdev, - size, &erst->erst_dma_addr, flags); + erst->entries = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev, + size, &erst->erst_dma_addr, flags); if (!erst->entries) return -ENOMEM; diff --git a/drivers/video/fbdev/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c index a74096c53cb5..43f2a4816860 100644 --- a/drivers/video/fbdev/da8xx-fb.c +++ b/drivers/video/fbdev/da8xx-fb.c @@ -1446,9 +1446,9 @@ static int fb_probe(struct platform_device *device) da8xx_fb_fix.line_length - 1; /* allocate palette buffer */ - par->v_palette_base = dma_zalloc_coherent(NULL, PALETTE_SIZE, - &par->p_palette_base, - GFP_KERNEL | GFP_DMA); + par->v_palette_base = dma_alloc_coherent(NULL, PALETTE_SIZE, + &par->p_palette_base, + GFP_KERNEL | GFP_DMA); if (!par->v_palette_base) { dev_err(&device->dev, "GLCD: kmalloc for palette buffer failed\n"); diff --git a/include/linux/pci-dma-compat.h b/include/linux/pci-dma-compat.h index cb1adf0b78a9..249d4d7fbf18 100644 --- a/include/linux/pci-dma-compat.h +++ b/include/linux/pci-dma-compat.h @@ -24,7 +24,7 @@ static inline void * pci_zalloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) { - return dma_zalloc_coherent(&hwdev->dev, size, dma_handle, GFP_ATOMIC); + return dma_alloc_coherent(&hwdev->dev, size, dma_handle, GFP_ATOMIC); } static inline void diff --git a/sound/aoa/soundbus/i2sbus/core.c b/sound/aoa/soundbus/i2sbus/core.c index c3f57a3fb1a5..40ebde2e1ab1 100644 --- a/sound/aoa/soundbus/i2sbus/core.c +++ b/sound/aoa/soundbus/i2sbus/core.c @@ -47,8 +47,8 @@ static int alloc_dbdma_descriptor_ring(struct i2sbus_dev *i2sdev, /* We use the PCI APIs for now until the generic one gets fixed * enough or until we get some macio-specific versions */ - r->space = dma_zalloc_coherent(&macio_get_pci_dev(i2sdev->macio)->dev, - r->size, &r->bus_addr, GFP_KERNEL); + r->space = dma_alloc_coherent(&macio_get_pci_dev(i2sdev->macio)->dev, + r->size, &r->bus_addr, GFP_KERNEL); if (!r->space) return -ENOMEM; diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 7609eceba1a2..9e71d7cda999 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -2541,8 +2541,8 @@ static int snd_dbri_create(struct snd_card *card, dbri->op = op; dbri->irq = irq; - dbri->dma = dma_zalloc_coherent(&op->dev, sizeof(struct dbri_dma), - &dbri->dma_dvma, GFP_KERNEL); + dbri->dma = dma_alloc_coherent(&op->dev, sizeof(struct dbri_dma), + &dbri->dma_dvma, GFP_KERNEL); if (!dbri->dma) return -ENOMEM; From 07a85fe14254e01bcf37f4d2e0a13f093378620b Mon Sep 17 00:00:00 2001 From: Luis Chamberlain Date: Wed, 19 Dec 2018 12:24:08 -0800 Subject: [PATCH 086/246] cross-tree: phase out dma_zalloc_coherent() on headers The last few stragglers coccinelle doesn't pick up are on driver specific header files. Phase those out as well as dma_alloc_coherent() zeroes out the memory as well now too. Suggested-by: Christoph Hellwig Signed-off-by: Luis Chamberlain Signed-off-by: Christoph Hellwig --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +- drivers/net/ethernet/marvell/octeontx2/af/common.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 5cd3135dfe30..03d131f777bc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2081,7 +2081,7 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id, bool is_pf); #define BNX2X_ILT_ZALLOC(x, y, size) \ - x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL) + x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL) #define BNX2X_ILT_FREE(x, y, size) \ do { \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 142bc11b9fbb..2462e7aa0c5d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -52,7 +52,7 @@ extern int bnx2x_num_queues; #define BNX2X_PCI_ALLOC(y, size) \ ({ \ - void *x = dma_zalloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ + void *x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ if (x) \ DP(NETIF_MSG_HW, \ "BNX2X_PCI_ALLOC: Physical %Lx Virtual %p\n", \ diff --git a/drivers/net/ethernet/marvell/octeontx2/af/common.h b/drivers/net/ethernet/marvell/octeontx2/af/common.h index ec50a21c5aaf..e332e82fc066 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/common.h +++ b/drivers/net/ethernet/marvell/octeontx2/af/common.h @@ -64,7 +64,7 @@ static inline int qmem_alloc(struct device *dev, struct qmem **q, qmem->entry_sz = entry_sz; qmem->alloc_sz = (qsize * entry_sz) + OTX2_ALIGN; - qmem->base = dma_zalloc_coherent(dev, qmem->alloc_sz, + qmem->base = dma_alloc_coherent(dev, qmem->alloc_sz, &qmem->iova, GFP_KERNEL); if (!qmem->base) return -ENOMEM; From dfd32cad146e3624970eee9329e99d2c6ef751b3 Mon Sep 17 00:00:00 2001 From: Luis Chamberlain Date: Wed, 19 Dec 2018 12:30:34 -0800 Subject: [PATCH 087/246] dma-mapping: remove dma_zalloc_coherent() dma_zalloc_coherent() is no longer needed as it has no users because dma_alloc_coherent() already zeroes out memory for us. The Coccinelle grammar rule that used to check for dma_alloc_coherent() + memset() is modified so that it just tells the user that the memset is not needed anymore. Suggested-by: Christoph Hellwig Signed-off-by: Luis Chamberlain Signed-off-by: Christoph Hellwig --- include/linux/dma-mapping.h | 9 --------- scripts/coccinelle/api/alloc/alloc_cast.cocci | 8 ++++---- scripts/coccinelle/api/alloc/zalloc-simple.cocci | 11 +---------- 3 files changed, 5 insertions(+), 23 deletions(-) diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index cef2127e1d70..f6ded992c183 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -717,15 +717,6 @@ static inline unsigned long dma_max_pfn(struct device *dev) } #endif -/* - * Please always use dma_alloc_coherent instead as it already zeroes the memory! - */ -static inline void *dma_zalloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - return dma_alloc_coherent(dev, size, dma_handle, flag); -} - static inline int dma_get_cache_alignment(void) { #ifdef ARCH_DMA_MINALIGN diff --git a/scripts/coccinelle/api/alloc/alloc_cast.cocci b/scripts/coccinelle/api/alloc/alloc_cast.cocci index 408ee3879f9b..18fedf7c60ed 100644 --- a/scripts/coccinelle/api/alloc/alloc_cast.cocci +++ b/scripts/coccinelle/api/alloc/alloc_cast.cocci @@ -32,7 +32,7 @@ type T; (T *) \(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|vmalloc\|vzalloc\| - dma_alloc_coherent\|dma_zalloc_coherent\|devm_kmalloc\|devm_kzalloc\| + dma_alloc_coherent\|devm_kmalloc\|devm_kzalloc\| kvmalloc\|kvzalloc\|kvmalloc_node\|kvzalloc_node\|pci_alloc_consistent\| pci_zalloc_consistent\|kmem_alloc\|kmem_zalloc\|kmem_zone_alloc\| kmem_zone_zalloc\|vmalloc_node\|vzalloc_node\)(...) @@ -55,7 +55,7 @@ type r1.T; * (T *) \(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|vmalloc\|vzalloc\| - dma_alloc_coherent\|dma_zalloc_coherent\|devm_kmalloc\|devm_kzalloc\| + dma_alloc_coherent\|devm_kmalloc\|devm_kzalloc\| kvmalloc\|kvzalloc\|kvmalloc_node\|kvzalloc_node\|pci_alloc_consistent\| pci_zalloc_consistent\|kmem_alloc\|kmem_zalloc\|kmem_zone_alloc\| kmem_zone_zalloc\|vmalloc_node\|vzalloc_node\)(...) @@ -78,7 +78,7 @@ type r1.T; - (T *) \(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|vmalloc\|vzalloc\| - dma_alloc_coherent\|dma_zalloc_coherent\|devm_kmalloc\|devm_kzalloc\| + dma_alloc_coherent\|devm_kmalloc\|devm_kzalloc\| kvmalloc\|kvzalloc\|kvmalloc_node\|kvzalloc_node\|pci_alloc_consistent\| pci_zalloc_consistent\|kmem_alloc\|kmem_zalloc\|kmem_zone_alloc\| kmem_zone_zalloc\|vmalloc_node\|vzalloc_node\)(...) @@ -95,7 +95,7 @@ position p; (T@p *) \(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|vmalloc\|vzalloc\| - dma_alloc_coherent\|dma_zalloc_coherent\|devm_kmalloc\|devm_kzalloc\| + dma_alloc_coherent\|devm_kmalloc\|devm_kzalloc\| kvmalloc\|kvzalloc\|kvmalloc_node\|kvzalloc_node\|pci_alloc_consistent\| pci_zalloc_consistent\|kmem_alloc\|kmem_zalloc\|kmem_zone_alloc\| kmem_zone_zalloc\|vmalloc_node\|vzalloc_node\)(...) diff --git a/scripts/coccinelle/api/alloc/zalloc-simple.cocci b/scripts/coccinelle/api/alloc/zalloc-simple.cocci index d819275b7fde..5cd1991c582e 100644 --- a/scripts/coccinelle/api/alloc/zalloc-simple.cocci +++ b/scripts/coccinelle/api/alloc/zalloc-simple.cocci @@ -69,15 +69,6 @@ statement S; - x = (T)vmalloc(E1); + x = (T)vzalloc(E1); | -- x = dma_alloc_coherent(E2,E1,E3,E4); -+ x = dma_zalloc_coherent(E2,E1,E3,E4); -| -- x = (T *)dma_alloc_coherent(E2,E1,E3,E4); -+ x = dma_zalloc_coherent(E2,E1,E3,E4); -| -- x = (T)dma_alloc_coherent(E2,E1,E3,E4); -+ x = (T)dma_zalloc_coherent(E2,E1,E3,E4); -| - x = kmalloc_node(E1,E2,E3); + x = kzalloc_node(E1,E2,E3); | @@ -225,7 +216,7 @@ p << r2.p; x << r2.x; @@ -msg="WARNING: dma_zalloc_coherent should be used for %s, instead of dma_alloc_coherent/memset" % (x) +msg="WARNING: dma_alloc_coherent use in %s already zeroes out memory, so memset is not needed" % (x) coccilib.report.print_report(p[0], msg) //----------------------------------------------------------------- From 735df0ff6ece7b8759a744158f5d246fae4739f4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 21 Dec 2018 08:54:40 +0100 Subject: [PATCH 088/246] Documentation: driver core: remove use of BUS_ATTR We are getting rid of the "raw" BUS_ATTR() macro, so fix up the documentation to not refer to it anymore. Cc: "Rafael J. Wysocki" Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/bus.txt | 8 ++++---- Documentation/filesystems/sysfs.txt | 4 +++- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/Documentation/driver-model/bus.txt b/Documentation/driver-model/bus.txt index b577a45b93ea..c247b488a567 100644 --- a/Documentation/driver-model/bus.txt +++ b/Documentation/driver-model/bus.txt @@ -124,11 +124,11 @@ struct bus_attribute { ssize_t (*store)(struct bus_type *, const char * buf, size_t count); }; -Bus drivers can export attributes using the BUS_ATTR macro that works -similarly to the DEVICE_ATTR macro for devices. For example, a definition -like this: +Bus drivers can export attributes using the BUS_ATTR_RW macro that works +similarly to the DEVICE_ATTR_RW macro for devices. For example, a +definition like this: -static BUS_ATTR(debug,0644,show_debug,store_debug); +static BUS_ATTR_RW(debug); is equivalent to declaring: diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index a1426cabcef1..41411b0c60a3 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -344,7 +344,9 @@ struct bus_attribute { Declaring: -BUS_ATTR(_name, _mode, _show, _store) +static BUS_ATTR_RW(name); +static BUS_ATTR_RO(name); +static BUS_ATTR_WO(name); Creation/Removal: From a3869d43c9800cf39496615361c83635fa3e7c82 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Mon, 7 Jan 2019 17:22:23 +0000 Subject: [PATCH 089/246] PCI: amlogic: Fix build failure due to missing gpio header Building the driver when GPIOLIB=n is not selected is causing the following compilation failure: drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_assert_reset': drivers/pci/controller/dwc/pci-meson.c:290:2: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(mp->reset_gpio, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/pci/controller/dwc/pci-meson.c: In function 'meson_pcie_probe': drivers/pci/controller/dwc/pci-meson.c:540:19: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~ devm_gpio_free drivers/pci/controller/dwc/pci-meson.c:540:48: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW Add the missing linux/gpio/consumer.h header to fix it. Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Signed-off-by: Corentin Labbe [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/dwc/pci-meson.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index 241ebe0c4505..e35e9eaa50ee 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include From 96354ad79e2e59f9d620669c8e1ac2452440c260 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Tue, 8 Jan 2019 20:17:49 +0800 Subject: [PATCH 090/246] csky: fixup CACHEV1 store instruction fast retire For I/O access, 810/807 store instruction fast retire will cause wrong primitive. For example: stw (clear interrupt source) stw (unmask interrupt controller) enable interrupt stw is fast retire instruction. When PC is run at enable interrupt stage, the clear interrupt source hasn't finished. It will cause another wrong irq-enter. So use mb() to prevent above. Signed-off-by: Guo Ren Cc: Lu Baoquan --- arch/csky/include/asm/io.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/csky/include/asm/io.h b/arch/csky/include/asm/io.h index ecae6b358f95..c1dfa9c10e36 100644 --- a/arch/csky/include/asm/io.h +++ b/arch/csky/include/asm/io.h @@ -15,6 +15,31 @@ extern void iounmap(void *addr); extern int remap_area_pages(unsigned long address, phys_addr_t phys_addr, size_t size, unsigned long flags); +/* + * I/O memory access primitives. Reads are ordered relative to any + * following Normal memory access. Writes are ordered relative to any prior + * Normal memory access. + * + * For CACHEV1 (807, 810), store instruction could fast retire, so we need + * another mb() to prevent st fast retire. + * + * For CACHEV2 (860), store instruction with PAGE_ATTR_NO_BUFFERABLE won't + * fast retire. + */ +#define readb(c) ({ u8 __v = readb_relaxed(c); rmb(); __v; }) +#define readw(c) ({ u16 __v = readw_relaxed(c); rmb(); __v; }) +#define readl(c) ({ u32 __v = readl_relaxed(c); rmb(); __v; }) + +#ifdef CONFIG_CPU_HAS_CACHEV2 +#define writeb(v,c) ({ wmb(); writeb_relaxed((v),(c)); }) +#define writew(v,c) ({ wmb(); writew_relaxed((v),(c)); }) +#define writel(v,c) ({ wmb(); writel_relaxed((v),(c)); }) +#else +#define writeb(v,c) ({ wmb(); writeb_relaxed((v),(c)); mb(); }) +#define writew(v,c) ({ wmb(); writew_relaxed((v),(c)); mb(); }) +#define writel(v,c) ({ wmb(); writel_relaxed((v),(c)); mb(); }) +#endif + #define ioremap_nocache(phy, sz) ioremap(phy, sz) #define ioremap_wc ioremap_nocache #define ioremap_wt ioremap_nocache From b9fcb0e6b7052b7e2d18fed1d673f8247060c32c Mon Sep 17 00:00:00 2001 From: David Brown Date: Mon, 7 Jan 2019 12:15:03 -0700 Subject: [PATCH 091/246] usb: storage: Remove outdated URL from MAINTAINERS This website hasn't worked for quite some time. Signed-off-by: David Brown Cc: Matt Dharm Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 32d444476a90..8ab7948133bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15802,7 +15802,6 @@ M: Alan Stern L: linux-usb@vger.kernel.org L: usb-storage@lists.one-eyed-alien.net S: Maintained -W: http://www.one-eyed-alien.net/~mdharm/linux-usb/ F: drivers/usb/storage/ USB MIDI DRIVER From d3a28a53630e1ca10f59562ef560e3f70785cb09 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 6 Jan 2019 19:50:37 +0100 Subject: [PATCH 092/246] serial: lantiq: Do not swap register read/writes The ltq_r32() and ltq_w32() macros use the __raw_readl() and __raw_writel() functions which do not swap the value to little endian. On the big endian vrx200 SoC the UART is operated in big endian IO mode, the readl() and write() functions convert the value to little endian first and then the driver does not work any more on this SoC. Currently the vrx200 SoC selects the CONFIG_SWAP_IO_SPACE option, without this option the serial driver would work, but PCI devices do not work any more. This patch makes the driver use the __raw_readl() and __raw_writel() functions which do not swap the endianness. On big endian system it is assumed that the device should be access in big endian IO mode and on a little endian system it would be access in little endian mode. Fixes: 89b8bd2082bb ("serial: lantiq: Use readl/writel instead of ltq_r32/ltq_w32") Signed-off-by: Hauke Mehrtens Acked-by: John Crispin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/lantiq.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index e052b69ceb98..9de9f0f239a1 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -114,9 +114,9 @@ struct ltq_uart_port { static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg) { - u32 tmp = readl(reg); + u32 tmp = __raw_readl(reg); - writel((tmp & ~clear) | set, reg); + __raw_writel((tmp & ~clear) | set, reg); } static inline struct @@ -144,7 +144,7 @@ lqasc_start_tx(struct uart_port *port) static void lqasc_stop_rx(struct uart_port *port) { - writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); + __raw_writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); } static int @@ -153,11 +153,12 @@ lqasc_rx_chars(struct uart_port *port) struct tty_port *tport = &port->state->port; unsigned int ch = 0, rsr = 0, fifocnt; - fifocnt = readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_RXFFLMASK; + fifocnt = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_RXFFLMASK; while (fifocnt--) { u8 flag = TTY_NORMAL; ch = readb(port->membase + LTQ_ASC_RBUF); - rsr = (readl(port->membase + LTQ_ASC_STATE) + rsr = (__raw_readl(port->membase + LTQ_ASC_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX; tty_flip_buffer_push(tport); port->icount.rx++; @@ -217,7 +218,7 @@ lqasc_tx_chars(struct uart_port *port) return; } - while (((readl(port->membase + LTQ_ASC_FSTAT) & + while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { if (port->x_char) { writeb(port->x_char, port->membase + LTQ_ASC_TBUF); @@ -245,7 +246,7 @@ lqasc_tx_int(int irq, void *_port) unsigned long flags; struct uart_port *port = (struct uart_port *)_port; spin_lock_irqsave(<q_asc_lock, flags); - writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); + __raw_writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); spin_unlock_irqrestore(<q_asc_lock, flags); lqasc_start_tx(port); return IRQ_HANDLED; @@ -270,7 +271,7 @@ lqasc_rx_int(int irq, void *_port) unsigned long flags; struct uart_port *port = (struct uart_port *)_port; spin_lock_irqsave(<q_asc_lock, flags); - writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); + __raw_writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); lqasc_rx_chars(port); spin_unlock_irqrestore(<q_asc_lock, flags); return IRQ_HANDLED; @@ -280,7 +281,8 @@ static unsigned int lqasc_tx_empty(struct uart_port *port) { int status; - status = readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFFLMASK; + status = __raw_readl(port->membase + LTQ_ASC_FSTAT) & + ASCFSTAT_TXFFLMASK; return status ? 0 : TIOCSER_TEMT; } @@ -313,12 +315,12 @@ lqasc_startup(struct uart_port *port) asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), port->membase + LTQ_ASC_CLC); - writel(0, port->membase + LTQ_ASC_PISEL); - writel( + __raw_writel(0, port->membase + LTQ_ASC_PISEL); + __raw_writel( ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); - writel( + __raw_writel( ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, port->membase + LTQ_ASC_RXFCON); @@ -350,7 +352,7 @@ lqasc_startup(struct uart_port *port) goto err2; } - writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, + __raw_writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, port->membase + LTQ_ASC_IRNREN); return 0; @@ -369,7 +371,7 @@ lqasc_shutdown(struct uart_port *port) free_irq(ltq_port->rx_irq, port); free_irq(ltq_port->err_irq, port); - writel(0, port->membase + LTQ_ASC_CON); + __raw_writel(0, port->membase + LTQ_ASC_CON); asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, port->membase + LTQ_ASC_RXFCON); asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, @@ -461,13 +463,13 @@ lqasc_set_termios(struct uart_port *port, asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); /* now we can write the new baudrate into the register */ - writel(divisor, port->membase + LTQ_ASC_BG); + __raw_writel(divisor, port->membase + LTQ_ASC_BG); /* turn the baudrate generator back on */ asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON); /* enable rx */ - writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); + __raw_writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); spin_unlock_irqrestore(<q_asc_lock, flags); @@ -578,7 +580,7 @@ lqasc_console_putchar(struct uart_port *port, int ch) return; do { - fifofree = (readl(port->membase + LTQ_ASC_FSTAT) + fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; } while (fifofree == 0); writeb(ch, port->membase + LTQ_ASC_TBUF); From d1fc1176c055c9ec9c6ec4d113a284e0bad9d09a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 8 Jan 2019 12:08:03 +0900 Subject: [PATCH 093/246] vfio/pci: set TRACE_INCLUDE_PATH to fix the build error drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree building. CC drivers/vfio/pci/vfio_pci_nvlink2.o In file included from drivers/vfio/pci/trace.h:102, from drivers/vfio/pci/vfio_pci_nvlink2.c:29: ./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory #include TRACE_INCLUDE(TRACE_INCLUDE_FILE) ^ compilation terminated. make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1 To fix the build error, let's tell include/trace/define_trace.h the location of drivers/vfio/pci/trace.h Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Reported-by: Laura Abbott Signed-off-by: Masahiro Yamada Reviewed-by: Cornelia Huck Signed-off-by: Alex Williamson --- drivers/vfio/pci/trace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vfio/pci/trace.h b/drivers/vfio/pci/trace.h index 228ccdb8d1c8..4d13e510590e 100644 --- a/drivers/vfio/pci/trace.h +++ b/drivers/vfio/pci/trace.h @@ -94,7 +94,7 @@ TRACE_EVENT(vfio_pci_npu2_mmap, #endif /* _TRACE_VFIO_PCI_H */ #undef TRACE_INCLUDE_PATH -#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_PATH ../../drivers/vfio/pci #undef TRACE_INCLUDE_FILE #define TRACE_INCLUDE_FILE trace From 2a60aa14a9a0333b3eef58150bc1ef654f7321ef Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Tue, 8 Jan 2019 20:31:43 +0800 Subject: [PATCH 094/246] csky: fixup compile error with pte_alloc Commit: 4cf58924951e remove the address argument of pte_alloc without modify csky related code. linux-5.0-rc1 compile failed with csky. Remove the unnecessary address testing in pte_alloc(). Signed-off-by: Guo Ren Cc: Joel Fernandes (Google) Cc: Guenter Roeck Cc: Arnd Bergmann Cc: Linus Torvalds --- arch/csky/include/asm/pgalloc.h | 41 ++++++++++++++------------------- 1 file changed, 17 insertions(+), 24 deletions(-) diff --git a/arch/csky/include/asm/pgalloc.h b/arch/csky/include/asm/pgalloc.h index bf4f4a0e140e..d213bb47b717 100644 --- a/arch/csky/include/asm/pgalloc.h +++ b/arch/csky/include/asm/pgalloc.h @@ -24,41 +24,34 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, extern void pgd_init(unsigned long *p); -static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, - unsigned long address) +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm) { pte_t *pte; - unsigned long *kaddr, i; + unsigned long i; - pte = (pte_t *) __get_free_pages(GFP_KERNEL | __GFP_RETRY_MAYFAIL, - PTE_ORDER); - kaddr = (unsigned long *)pte; - if (address & 0x80000000) - for (i = 0; i < (PAGE_SIZE/4); i++) - *(kaddr + i) = 0x1; - else - clear_page(kaddr); + pte = (pte_t *) __get_free_page(GFP_KERNEL); + if (!pte) + return NULL; + + for (i = 0; i < PAGE_SIZE/sizeof(pte_t); i++) + (pte + i)->pte_low = _PAGE_GLOBAL; return pte; } -static inline struct page *pte_alloc_one(struct mm_struct *mm, - unsigned long address) +static inline struct page *pte_alloc_one(struct mm_struct *mm) { struct page *pte; - unsigned long *kaddr, i; - pte = alloc_pages(GFP_KERNEL | __GFP_RETRY_MAYFAIL, PTE_ORDER); - if (pte) { - kaddr = kmap_atomic(pte); - if (address & 0x80000000) { - for (i = 0; i < (PAGE_SIZE/4); i++) - *(kaddr + i) = 0x1; - } else - clear_page(kaddr); - kunmap_atomic(kaddr); - pgtable_page_ctor(pte); + pte = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); + if (!pte) + return NULL; + + if (!pgtable_page_ctor(pte)) { + __free_page(pte); + return NULL; } + return pte; } From 56752b21755aef598709d143684cb363db98a7d2 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Tue, 8 Jan 2019 20:49:24 +0800 Subject: [PATCH 095/246] irqchip/csky: fixup handle_irq_perbit break irq The handle_irq_perbit function loop every bit in hwirq local variable. handle_irq_perbit(hwirq) { for_everyt_bit_in(hwirq) { handle_domain_irq() ->irq_exit() ->invoke_softirq() ->__do_softirq() ->local_irq_enable() // Here will cause new interrupt. } } When new interrupt coming at local_irq_enable, it will finish another interrupt handler and pull down the interrupt source. But hwirq is the local variable for handle_irq_perbit(), it can't get new interrupt controller pending reg status. So we need update hwirq with pending reg in every loop. Also change write_relax to writel could prevent stw from fast retire. When local_irq is enabled, intc regs is really set-in. Signed-off-by: Guo Ren Cc: Lu Baoquan --- drivers/irqchip/irq-csky-apb-intc.c | 77 ++++++++++++++++------------- 1 file changed, 42 insertions(+), 35 deletions(-) diff --git a/drivers/irqchip/irq-csky-apb-intc.c b/drivers/irqchip/irq-csky-apb-intc.c index 2543baba8b1f..5a2ec43b7ddd 100644 --- a/drivers/irqchip/irq-csky-apb-intc.c +++ b/drivers/irqchip/irq-csky-apb-intc.c @@ -95,7 +95,7 @@ static inline void setup_irq_channel(u32 magic, void __iomem *reg_addr) /* Setup 64 channel slots */ for (i = 0; i < INTC_IRQS; i += 4) - writel_relaxed(build_channel_val(i, magic), reg_addr + i); + writel(build_channel_val(i, magic), reg_addr + i); } static int __init @@ -135,16 +135,10 @@ ck_intc_init_comm(struct device_node *node, struct device_node *parent) static inline bool handle_irq_perbit(struct pt_regs *regs, u32 hwirq, u32 irq_base) { - u32 irq; - if (hwirq == 0) return 0; - while (hwirq) { - irq = __ffs(hwirq); - hwirq &= ~BIT(irq); - handle_domain_irq(root_domain, irq_base + irq, regs); - } + handle_domain_irq(root_domain, irq_base + __fls(hwirq), regs); return 1; } @@ -154,12 +148,16 @@ static void gx_irq_handler(struct pt_regs *regs) { bool ret; - do { - ret = handle_irq_perbit(regs, - readl_relaxed(reg_base + GX_INTC_PEN31_00), 0); - ret |= handle_irq_perbit(regs, - readl_relaxed(reg_base + GX_INTC_PEN63_32), 32); - } while (ret); +retry: + ret = handle_irq_perbit(regs, + readl(reg_base + GX_INTC_PEN63_32), 32); + if (ret) + goto retry; + + ret = handle_irq_perbit(regs, + readl(reg_base + GX_INTC_PEN31_00), 0); + if (ret) + goto retry; } static int __init @@ -174,14 +172,14 @@ gx_intc_init(struct device_node *node, struct device_node *parent) /* * Initial enable reg to disable all interrupts */ - writel_relaxed(0x0, reg_base + GX_INTC_NEN31_00); - writel_relaxed(0x0, reg_base + GX_INTC_NEN63_32); + writel(0x0, reg_base + GX_INTC_NEN31_00); + writel(0x0, reg_base + GX_INTC_NEN63_32); /* * Initial mask reg with all unmasked, because we only use enalbe reg */ - writel_relaxed(0x0, reg_base + GX_INTC_NMASK31_00); - writel_relaxed(0x0, reg_base + GX_INTC_NMASK63_32); + writel(0x0, reg_base + GX_INTC_NMASK31_00); + writel(0x0, reg_base + GX_INTC_NMASK63_32); setup_irq_channel(0x03020100, reg_base + GX_INTC_SOURCE); @@ -204,20 +202,29 @@ static void ck_irq_handler(struct pt_regs *regs) void __iomem *reg_pen_lo = reg_base + CK_INTC_PEN31_00; void __iomem *reg_pen_hi = reg_base + CK_INTC_PEN63_32; - do { - /* handle 0 - 31 irqs */ - ret = handle_irq_perbit(regs, readl_relaxed(reg_pen_lo), 0); - ret |= handle_irq_perbit(regs, readl_relaxed(reg_pen_hi), 32); +retry: + /* handle 0 - 63 irqs */ + ret = handle_irq_perbit(regs, readl(reg_pen_hi), 32); + if (ret) + goto retry; - if (nr_irq == INTC_IRQS) - continue; + ret = handle_irq_perbit(regs, readl(reg_pen_lo), 0); + if (ret) + goto retry; - /* handle 64 - 127 irqs */ - ret |= handle_irq_perbit(regs, - readl_relaxed(reg_pen_lo + CK_INTC_DUAL_BASE), 64); - ret |= handle_irq_perbit(regs, - readl_relaxed(reg_pen_hi + CK_INTC_DUAL_BASE), 96); - } while (ret); + if (nr_irq == INTC_IRQS) + return; + + /* handle 64 - 127 irqs */ + ret = handle_irq_perbit(regs, + readl(reg_pen_hi + CK_INTC_DUAL_BASE), 96); + if (ret) + goto retry; + + ret = handle_irq_perbit(regs, + readl(reg_pen_lo + CK_INTC_DUAL_BASE), 64); + if (ret) + goto retry; } static int __init @@ -230,11 +237,11 @@ ck_intc_init(struct device_node *node, struct device_node *parent) return ret; /* Initial enable reg to disable all interrupts */ - writel_relaxed(0, reg_base + CK_INTC_NEN31_00); - writel_relaxed(0, reg_base + CK_INTC_NEN63_32); + writel(0, reg_base + CK_INTC_NEN31_00); + writel(0, reg_base + CK_INTC_NEN63_32); /* Enable irq intc */ - writel_relaxed(BIT(31), reg_base + CK_INTC_ICR); + writel(BIT(31), reg_base + CK_INTC_ICR); ck_set_gc(node, reg_base, CK_INTC_NEN31_00, 0); ck_set_gc(node, reg_base, CK_INTC_NEN63_32, 32); @@ -260,8 +267,8 @@ ck_dual_intc_init(struct device_node *node, struct device_node *parent) return ret; /* Initial enable reg to disable all interrupts */ - writel_relaxed(0, reg_base + CK_INTC_NEN31_00 + CK_INTC_DUAL_BASE); - writel_relaxed(0, reg_base + CK_INTC_NEN63_32 + CK_INTC_DUAL_BASE); + writel(0, reg_base + CK_INTC_NEN31_00 + CK_INTC_DUAL_BASE); + writel(0, reg_base + CK_INTC_NEN63_32 + CK_INTC_DUAL_BASE); ck_set_gc(node, reg_base + CK_INTC_DUAL_BASE, CK_INTC_NEN31_00, 64); ck_set_gc(node, reg_base + CK_INTC_DUAL_BASE, CK_INTC_NEN63_32, 96); From 172bf02d564bdb6df8410f64720fa2c68e755d1a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 7 Jan 2019 16:24:27 -0300 Subject: [PATCH 096/246] perf trace: Fix ')' placement in "interrupted" syscall lines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we get the sys_enter for a syscall we check if the last one is still waiting for its matching sys_exit, if so we print this: 468.753 ( ): firefox/32382 poll(ufds: 0x7f3988d3dd00, nfds: 7, timeout_msecs: 4294967295) ... 449.575 ( 0.004 ms): Softwar~cThrea/32434 futex(uaddr: 0x7f39a18a9b70, op: WAKE|PRIVATE_FLAG, val: 1) = 0 At some point we'll get that poll sys_exit event and will print a "[continued]" line. While making the sizing of the alignment after the syscall arg list and its result configurable, so that we can mimic strace, which uses a smaller alingment by default, a bug was introduced where the closing parens appeared before the syscall name and its arg list, fix it. Fixes: 4b8a240ed5e0 ("perf trace: Add alignment spaces after the closing parens") Cc: Adrian Hunter Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-oi45i54s59h1w1kmgpzrfuum@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index adbf28183560..b8bf5d025563 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -1758,6 +1758,7 @@ static int trace__printf_interrupted_entry(struct trace *trace) { struct thread_trace *ttrace; size_t printed; + int len; if (trace->failure_only || trace->current == NULL) return 0; @@ -1768,9 +1769,14 @@ static int trace__printf_interrupted_entry(struct trace *trace) return 0; printed = trace__fprintf_entry_head(trace, trace->current, 0, false, ttrace->entry_time, trace->output); - printed += fprintf(trace->output, ")%-*s ...\n", trace->args_alignment, ttrace->entry_str); - ttrace->entry_pending = false; + printed += len = fprintf(trace->output, "%s)", ttrace->entry_str); + if (len < trace->args_alignment - 4) + printed += fprintf(trace->output, "%-*s", trace->args_alignment - 4 - len, " "); + + printed += fprintf(trace->output, " ...\n"); + + ttrace->entry_pending = false; ++trace->nr_events_printed; return printed; From ac6e022cbfdce215ad545e91d9827060855da3d7 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 7 Jan 2019 16:54:38 -0300 Subject: [PATCH 097/246] perf trace: Fix alignment for [continued] lines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were not taking into account the "... [continued]" printed characters, fix it. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-qt20y0acmf8k0bzisce8kw95@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-trace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index b8bf5d025563..ed4583128b9c 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -2032,9 +2032,10 @@ static int trace__sys_exit(struct trace *trace, struct perf_evsel *evsel, if (ttrace->entry_pending) { printed = fprintf(trace->output, "%s", ttrace->entry_str); } else { - fprintf(trace->output, " ... ["); + printed += fprintf(trace->output, " ... ["); color_fprintf(trace->output, PERF_COLOR_YELLOW, "continued"); - fprintf(trace->output, "]: %s()", sc->name); + printed += 9; + printed += fprintf(trace->output, "]: %s()", sc->name); } printed++; /* the closing ')' */ From 011532379b7c2de6757e129037bdfc8d704bce23 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 20 Dec 2018 19:43:36 -0800 Subject: [PATCH 098/246] perf tools: Make find_vdso_map() more modular In preparation for checking that the vectors page on the ARM architecture, refactor the find_vdso_map() function to accept finding an arbitrary string and create a dedicated helper function for that under util/find-map.c and update the filename to find-map.c and all references to it: perf-read-vdso.c and util/vdso.c. Signed-off-by: Florian Fainelli Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Chris Healy Cc: Greg Kroah-Hartman Cc: Kim Phillips Cc: Lucas Stach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Russell King Cc: Thomas Gleixner Cc: Thomas Richter Link: http://lkml.kernel.org/r/20181221034337.26663-2-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile.perf | 4 ++-- tools/perf/perf-read-vdso.c | 6 +++--- tools/perf/util/{find-vdso-map.c => find-map.c} | 7 +++---- tools/perf/util/vdso.c | 6 +++--- 4 files changed, 11 insertions(+), 12 deletions(-) rename tools/perf/util/{find-vdso-map.c => find-map.c} (71%) diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index 2921f829a0f4..0ee6795d82cc 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -662,12 +662,12 @@ $(OUTPUT)perf-%: %.o $(PERFLIBS) $(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $(LDFLAGS) $(filter %.o,$^) $(LIBS) ifndef NO_PERF_READ_VDSO32 -$(OUTPUT)perf-read-vdso32: perf-read-vdso.c util/find-vdso-map.c +$(OUTPUT)perf-read-vdso32: perf-read-vdso.c util/find-map.c $(QUIET_CC)$(CC) -m32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c endif ifndef NO_PERF_READ_VDSOX32 -$(OUTPUT)perf-read-vdsox32: perf-read-vdso.c util/find-vdso-map.c +$(OUTPUT)perf-read-vdsox32: perf-read-vdso.c util/find-map.c $(QUIET_CC)$(CC) -mx32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c endif diff --git a/tools/perf/perf-read-vdso.c b/tools/perf/perf-read-vdso.c index 8c0ca0cc428f..aaa5210ea84a 100644 --- a/tools/perf/perf-read-vdso.c +++ b/tools/perf/perf-read-vdso.c @@ -5,17 +5,17 @@ #define VDSO__MAP_NAME "[vdso]" /* - * Include definition of find_vdso_map() also used in util/vdso.c for + * Include definition of find_map() also used in util/vdso.c for * building perf. */ -#include "util/find-vdso-map.c" +#include "util/find-map.c" int main(void) { void *start, *end; size_t size, written; - if (find_vdso_map(&start, &end)) + if (find_map(&start, &end, VDSO__MAP_NAME)) return 1; size = end - start; diff --git a/tools/perf/util/find-vdso-map.c b/tools/perf/util/find-map.c similarity index 71% rename from tools/perf/util/find-vdso-map.c rename to tools/perf/util/find-map.c index d7823e3508fc..7b2300588ece 100644 --- a/tools/perf/util/find-vdso-map.c +++ b/tools/perf/util/find-map.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -static int find_vdso_map(void **start, void **end) +static int find_map(void **start, void **end, const char *name) { FILE *maps; char line[128]; @@ -7,7 +7,7 @@ static int find_vdso_map(void **start, void **end) maps = fopen("/proc/self/maps", "r"); if (!maps) { - fprintf(stderr, "vdso: cannot open maps\n"); + fprintf(stderr, "cannot open maps\n"); return -1; } @@ -21,8 +21,7 @@ static int find_vdso_map(void **start, void **end) if (m < 0) continue; - if (!strncmp(&line[m], VDSO__MAP_NAME, - sizeof(VDSO__MAP_NAME) - 1)) + if (!strncmp(&line[m], name, strlen(name))) found = 1; } diff --git a/tools/perf/util/vdso.c b/tools/perf/util/vdso.c index 741af209b19d..3702cba11d7d 100644 --- a/tools/perf/util/vdso.c +++ b/tools/perf/util/vdso.c @@ -18,10 +18,10 @@ #include "debug.h" /* - * Include definition of find_vdso_map() also used in perf-read-vdso.c for + * Include definition of find_map() also used in perf-read-vdso.c for * building perf-read-vdso32 and perf-read-vdsox32. */ -#include "find-vdso-map.c" +#include "find-map.c" #define VDSO__TEMP_FILE_NAME "/tmp/perf-vdso.so-XXXXXX" @@ -76,7 +76,7 @@ static char *get_file(struct vdso_file *vdso_file) if (vdso_file->found) return vdso_file->temp_file_name; - if (vdso_file->error || find_vdso_map(&start, &end)) + if (vdso_file->error || find_map(&start, &end, VDSO__MAP_NAME)) return NULL; size = end - start; From 21327c7843e9169d5e2e527713e60e6c9842a56c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 20 Dec 2018 19:43:37 -0800 Subject: [PATCH 099/246] perf tests: Add a test for the ARM 32-bit [vectors] page perf on ARM requires CONFIG_KUSER_HELPERS to be turned on to allow some independance with respect to the ARM CPU being used. Add a test which tries to locate the [vectors] page, created when CONFIG_KUSER_HELPERS is turned on to help asses the system's health. Signed-off-by: Florian Fainelli Acked-by: Jiri Olsa Cc: Alexander Shishkin Cc: Chris Healy Cc: Greg Kroah-Hartman Cc: Kim Phillips Cc: Lucas Stach Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Ravi Bangoria Cc: Russell King Cc: Thomas Gleixner Cc: Thomas Richter Link: http://lkml.kernel.org/r/20181221034337.26663-3-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/arm/tests/Build | 1 + tools/perf/arch/arm/tests/arch-tests.c | 4 ++++ tools/perf/arch/arm/tests/vectors-page.c | 24 ++++++++++++++++++++++++ tools/perf/tests/tests.h | 5 +++++ 4 files changed, 34 insertions(+) create mode 100644 tools/perf/arch/arm/tests/vectors-page.c diff --git a/tools/perf/arch/arm/tests/Build b/tools/perf/arch/arm/tests/Build index 883c57ff0c08..d9ae2733f9cc 100644 --- a/tools/perf/arch/arm/tests/Build +++ b/tools/perf/arch/arm/tests/Build @@ -1,4 +1,5 @@ libperf-y += regs_load.o libperf-y += dwarf-unwind.o +libperf-y += vectors-page.o libperf-y += arch-tests.o diff --git a/tools/perf/arch/arm/tests/arch-tests.c b/tools/perf/arch/arm/tests/arch-tests.c index 5b1543c98022..6848101a855f 100644 --- a/tools/perf/arch/arm/tests/arch-tests.c +++ b/tools/perf/arch/arm/tests/arch-tests.c @@ -10,6 +10,10 @@ struct test arch_tests[] = { .func = test__dwarf_unwind, }, #endif + { + .desc = "Vectors page", + .func = test__vectors_page, + }, { .func = NULL, }, diff --git a/tools/perf/arch/arm/tests/vectors-page.c b/tools/perf/arch/arm/tests/vectors-page.c new file mode 100644 index 000000000000..7ffdd79971c8 --- /dev/null +++ b/tools/perf/arch/arm/tests/vectors-page.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +#include "debug.h" +#include "tests/tests.h" +#include "util/find-map.c" + +#define VECTORS__MAP_NAME "[vectors]" + +int test__vectors_page(struct test *test __maybe_unused, + int subtest __maybe_unused) +{ + void *start, *end; + + if (find_map(&start, &end, VECTORS__MAP_NAME)) { + pr_err("%s not found, is CONFIG_KUSER_HELPERS enabled?\n", + VECTORS__MAP_NAME); + return TEST_FAIL; + } + + return TEST_OK; +} diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h index b82f55fcc294..399f18ca71a3 100644 --- a/tools/perf/tests/tests.h +++ b/tools/perf/tests/tests.h @@ -119,4 +119,9 @@ int test__arch_unwind_sample(struct perf_sample *sample, struct thread *thread); #endif #endif + +#if defined(__arm__) +int test__vectors_page(struct test *test, int subtest); +#endif + #endif /* TESTS_H */ From ca3958b1c0968a6f3105e211355f128ce871e796 Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 10:44:11 -0500 Subject: [PATCH 100/246] tools lib traceevent: Introduce new libtracevent API: tep_override_comm() This patch adds a new API of tracevent library: tep_override_comm() It registers a pid / command mapping. If a mapping with the same pid already exists, the entry is updated with the new command. Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181130154648.038915912@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 69 +++++++++++++++++++++++------- tools/lib/traceevent/event-parse.h | 1 + 2 files changed, 55 insertions(+), 15 deletions(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 69a96e39f0ab..156e513074b2 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -232,11 +232,13 @@ int tep_pid_is_registered(struct tep_handle *pevent, int pid) * we must add this pid. This is much slower than when cmdlines * are added before the array is initialized. */ -static int add_new_comm(struct tep_handle *pevent, const char *comm, int pid) +static int add_new_comm(struct tep_handle *pevent, + const char *comm, int pid, bool override) { struct cmdline *cmdlines = pevent->cmdlines; - const struct cmdline *cmdline; + struct cmdline *cmdline; struct cmdline key; + char *new_comm; if (!pid) return 0; @@ -247,8 +249,19 @@ static int add_new_comm(struct tep_handle *pevent, const char *comm, int pid) cmdline = bsearch(&key, pevent->cmdlines, pevent->cmdline_count, sizeof(*pevent->cmdlines), cmdline_cmp); if (cmdline) { - errno = EEXIST; - return -1; + if (!override) { + errno = EEXIST; + return -1; + } + new_comm = strdup(comm); + if (!new_comm) { + errno = ENOMEM; + return -1; + } + free(cmdline->comm); + cmdline->comm = new_comm; + + return 0; } cmdlines = realloc(cmdlines, sizeof(*cmdlines) * (pevent->cmdline_count + 1)); @@ -275,21 +288,13 @@ static int add_new_comm(struct tep_handle *pevent, const char *comm, int pid) return 0; } -/** - * tep_register_comm - register a pid / comm mapping - * @pevent: handle for the pevent - * @comm: the command line to register - * @pid: the pid to map the command line to - * - * This adds a mapping to search for command line names with - * a given pid. The comm is duplicated. - */ -int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid) +static int _tep_register_comm(struct tep_handle *pevent, + const char *comm, int pid, bool override) { struct cmdline_list *item; if (pevent->cmdlines) - return add_new_comm(pevent, comm, pid); + return add_new_comm(pevent, comm, pid, override); item = malloc(sizeof(*item)); if (!item) @@ -312,6 +317,40 @@ int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid) return 0; } +/** + * tep_register_comm - register a pid / comm mapping + * @pevent: handle for the pevent + * @comm: the command line to register + * @pid: the pid to map the command line to + * + * This adds a mapping to search for command line names with + * a given pid. The comm is duplicated. If a command with the same pid + * already exist, -1 is returned and errno is set to EEXIST + */ +int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid) +{ + return _tep_register_comm(pevent, comm, pid, false); +} + +/** + * tep_override_comm - register a pid / comm mapping + * @pevent: handle for the pevent + * @comm: the command line to register + * @pid: the pid to map the command line to + * + * This adds a mapping to search for command line names with + * a given pid. The comm is duplicated. If a command with the same pid + * already exist, the command string is udapted with the new one + */ +int tep_override_comm(struct tep_handle *pevent, const char *comm, int pid) +{ + if (!pevent->cmdlines && cmdline_init(pevent)) { + errno = ENOMEM; + return -1; + } + return _tep_register_comm(pevent, comm, pid, true); +} + int tep_register_trace_clock(struct tep_handle *pevent, const char *trace_clock) { pevent->trace_clock = strdup(trace_clock); diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index 35d37087d3c5..e6f4249910e6 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -432,6 +432,7 @@ int tep_set_function_resolver(struct tep_handle *pevent, tep_func_resolver_t *func, void *priv); void tep_reset_function_resolver(struct tep_handle *pevent); int tep_register_comm(struct tep_handle *pevent, const char *comm, int pid); +int tep_override_comm(struct tep_handle *pevent, const char *comm, int pid); int tep_register_trace_clock(struct tep_handle *pevent, const char *trace_clock); int tep_register_function(struct tep_handle *pevent, char *name, unsigned long long addr, char *mod); From eed14f4b075ec594ac09921b998bf3dd61f5886b Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 23:08:08 -0500 Subject: [PATCH 101/246] tools lib traceevent: Initialize host_bigendian at tep_handle allocation This patch initializes the host_bigendian member of the tep_handle structure with the byte order of the current host, when this handler is created - in tep_alloc() API. We need this in order to remove the tep_set_host_bigendian() API. Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181201040852.216292134@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 156e513074b2..44b80471b024 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -6762,8 +6762,10 @@ struct tep_handle *tep_alloc(void) { struct tep_handle *pevent = calloc(1, sizeof(*pevent)); - if (pevent) + if (pevent) { pevent->ref_count = 1; + pevent->host_bigendian = tep_host_bigendian(); + } return pevent; } From 2e4318a287bdf815140462257ab8697f5289a12f Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 23:08:09 -0500 Subject: [PATCH 102/246] tools lib traceevent: Rename struct cmdline to struct tep_cmdline In order to make libtraceevent a proper library, variables, data structures and functions should have a unique prefix to prevent name space conflicts. That prefix will be "tep_". This patch renames 'struct cmdline' to 'struct tep_cmdline'. Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181201040852.358871851@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse-local.h | 4 +-- tools/lib/traceevent/event-parse.c | 36 ++++++++++++------------ tools/lib/traceevent/event-parse.h | 8 +++--- 3 files changed, 24 insertions(+), 24 deletions(-) diff --git a/tools/lib/traceevent/event-parse-local.h b/tools/lib/traceevent/event-parse-local.h index 9a092dd4a86d..35833ee32d6c 100644 --- a/tools/lib/traceevent/event-parse-local.h +++ b/tools/lib/traceevent/event-parse-local.h @@ -7,7 +7,7 @@ #ifndef _PARSE_EVENTS_INT_H #define _PARSE_EVENTS_INT_H -struct cmdline; +struct tep_cmdline; struct cmdline_list; struct func_map; struct func_list; @@ -36,7 +36,7 @@ struct tep_handle { int long_size; int page_size; - struct cmdline *cmdlines; + struct tep_cmdline *cmdlines; struct cmdline_list *cmdlist; int cmdline_count; diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 44b80471b024..a850342baf86 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -124,15 +124,15 @@ struct tep_print_arg *alloc_arg(void) return calloc(1, sizeof(struct tep_print_arg)); } -struct cmdline { +struct tep_cmdline { char *comm; int pid; }; static int cmdline_cmp(const void *a, const void *b) { - const struct cmdline *ca = a; - const struct cmdline *cb = b; + const struct tep_cmdline *ca = a; + const struct tep_cmdline *cb = b; if (ca->pid < cb->pid) return -1; @@ -152,7 +152,7 @@ static int cmdline_init(struct tep_handle *pevent) { struct cmdline_list *cmdlist = pevent->cmdlist; struct cmdline_list *item; - struct cmdline *cmdlines; + struct tep_cmdline *cmdlines; int i; cmdlines = malloc(sizeof(*cmdlines) * pevent->cmdline_count); @@ -179,8 +179,8 @@ static int cmdline_init(struct tep_handle *pevent) static const char *find_cmdline(struct tep_handle *pevent, int pid) { - const struct cmdline *comm; - struct cmdline key; + const struct tep_cmdline *comm; + struct tep_cmdline key; if (!pid) return ""; @@ -208,8 +208,8 @@ static const char *find_cmdline(struct tep_handle *pevent, int pid) */ int tep_pid_is_registered(struct tep_handle *pevent, int pid) { - const struct cmdline *comm; - struct cmdline key; + const struct tep_cmdline *comm; + struct tep_cmdline key; if (!pid) return 1; @@ -235,9 +235,9 @@ int tep_pid_is_registered(struct tep_handle *pevent, int pid) static int add_new_comm(struct tep_handle *pevent, const char *comm, int pid, bool override) { - struct cmdline *cmdlines = pevent->cmdlines; - struct cmdline *cmdline; - struct cmdline key; + struct tep_cmdline *cmdlines = pevent->cmdlines; + struct tep_cmdline *cmdline; + struct tep_cmdline key; char *new_comm; if (!pid) @@ -5331,8 +5331,8 @@ const char *tep_data_comm_from_pid(struct tep_handle *pevent, int pid) return comm; } -static struct cmdline * -pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct cmdline *next) +static struct tep_cmdline * +pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct tep_cmdline *next) { struct cmdline_list *cmdlist = (struct cmdline_list *)next; @@ -5344,7 +5344,7 @@ pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct cmdline *ne while (cmdlist && strcmp(cmdlist->comm, comm) != 0) cmdlist = cmdlist->next; - return (struct cmdline *)cmdlist; + return (struct tep_cmdline *)cmdlist; } /** @@ -5360,10 +5360,10 @@ pid_from_cmdlist(struct tep_handle *pevent, const char *comm, struct cmdline *ne * next pid. * Also, it does a linear search, so it may be slow. */ -struct cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *comm, - struct cmdline *next) +struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *comm, + struct tep_cmdline *next) { - struct cmdline *cmdline; + struct tep_cmdline *cmdline; /* * If the cmdlines have not been converted yet, then use @@ -5402,7 +5402,7 @@ struct cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *co * Returns the pid for a give cmdline. If @cmdline is NULL, then * -1 is returned. */ -int tep_cmdline_pid(struct tep_handle *pevent, struct cmdline *cmdline) +int tep_cmdline_pid(struct tep_handle *pevent, struct tep_cmdline *cmdline) { struct cmdline_list *cmdlist = (struct cmdline_list *)cmdline; diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index e6f4249910e6..77a4a1dd4b4d 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -526,10 +526,10 @@ int tep_data_pid(struct tep_handle *pevent, struct tep_record *rec); int tep_data_preempt_count(struct tep_handle *pevent, struct tep_record *rec); int tep_data_flags(struct tep_handle *pevent, struct tep_record *rec); const char *tep_data_comm_from_pid(struct tep_handle *pevent, int pid); -struct cmdline; -struct cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *comm, - struct cmdline *next); -int tep_cmdline_pid(struct tep_handle *pevent, struct cmdline *cmdline); +struct tep_cmdline; +struct tep_cmdline *tep_data_pid_from_comm(struct tep_handle *pevent, const char *comm, + struct tep_cmdline *next); +int tep_cmdline_pid(struct tep_handle *pevent, struct tep_cmdline *cmdline); void tep_print_field(struct trace_seq *s, void *data, struct tep_format_field *field); From 6d2d6fd7e3ee0daf0d8308741792b3ec41aafd0c Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 23:08:10 -0500 Subject: [PATCH 103/246] tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs In order to make libtraceevent into a proper library, its API should be straightforward. The trace_seq_printf() and trace_seq_vprintf() APIs have inconsistent returned values with the other trace_seq_* APIs. This path changes the return logic of trace_seq_printf() and trace_seq_vprintf() to return the number of printed characters, as the other trace_seq_* related APIs. Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181201040852.485792891@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/trace-seq.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/tools/lib/traceevent/trace-seq.c b/tools/lib/traceevent/trace-seq.c index 8ff1d55954d1..8d5ecd2bf877 100644 --- a/tools/lib/traceevent/trace-seq.c +++ b/tools/lib/traceevent/trace-seq.c @@ -100,7 +100,8 @@ static void expand_buffer(struct trace_seq *s) * @fmt: printf format string * * It returns 0 if the trace oversizes the buffer's free - * space, 1 otherwise. + * space, the number of characters printed, or a negative + * value in case of an error. * * The tracer may use either sequence operations or its own * copy to user routines. To simplify formating of a trace @@ -129,9 +130,10 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) goto try_again; } - s->len += ret; + if (ret > 0) + s->len += ret; - return 1; + return ret; } /** @@ -139,6 +141,10 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) * @s: trace sequence descriptor * @fmt: printf format string * + * It returns 0 if the trace oversizes the buffer's free + * space, the number of characters printed, or a negative + * value in case of an error. + * * * The tracer may use either sequence operations or its own * copy to user routines. To simplify formating of a trace * trace_seq_printf is used to store strings into a special @@ -163,9 +169,10 @@ trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args) goto try_again; } - s->len += ret; + if (ret > 0) + s->len += ret; - return len; + return ret; } /** From f87ce7c43f36d4abff91b19edadd23939f99ff98 Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 23:08:11 -0500 Subject: [PATCH 104/246] tools lib traceevent: Changed return logic of tep_register_event_handler() API In order to make libtraceevent into a proper library, its API should be straightforward. The tep_register_event_handler() functions returns -1 in case it successfully registers the new event handler. Such return code is used by the other library APIs in case of an error. To unify the return logic of tep_register_event_handler() with the other APIs, this patch introduces enum tep_reg_handler, which is used by this function as return value, to handle all possible successful return cases. Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181201040852.628034497@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 10 ++++++++-- tools/lib/traceevent/event-parse.h | 5 +++++ 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index a850342baf86..54d94054eef0 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -6632,6 +6632,12 @@ static struct tep_event *search_event(struct tep_handle *pevent, int id, * * If @id is >= 0, then it is used to find the event. * else @sys_name and @event_name are used. + * + * Returns: + * TEP_REGISTER_SUCCESS_OVERWRITE if an existing handler is overwritten + * TEP_REGISTER_SUCCESS if a new handler is registered successfully + * negative TEP_ERRNO_... in case of an error + * */ int tep_register_event_handler(struct tep_handle *pevent, int id, const char *sys_name, const char *event_name, @@ -6649,7 +6655,7 @@ int tep_register_event_handler(struct tep_handle *pevent, int id, event->handler = func; event->context = context; - return 0; + return TEP_REGISTER_SUCCESS_OVERWRITE; not_found: /* Save for later use. */ @@ -6679,7 +6685,7 @@ int tep_register_event_handler(struct tep_handle *pevent, int id, pevent->handlers = handle; handle->context = context; - return -1; + return TEP_REGISTER_SUCCESS; } static int handle_matches(struct event_handler *handler, int id, diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index 77a4a1dd4b4d..ac377ae99008 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -485,6 +485,11 @@ int tep_print_func_field(struct trace_seq *s, const char *fmt, struct tep_event *event, const char *name, struct tep_record *record, int err); +enum tep_reg_handler { + TEP_REGISTER_SUCCESS = 0, + TEP_REGISTER_SUCCESS_OVERWRITE, +}; + int tep_register_event_handler(struct tep_handle *pevent, int id, const char *sys_name, const char *event_name, tep_event_handler_func func, void *context); From 4104e604277016b3e6a7d120368054f9d2716953 Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 23:08:12 -0500 Subject: [PATCH 105/246] tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian() In order to make libtraceevent into a proper library, its API should be straightforward. After a discussion with Steven Rostedt, we decided to rename a few APIs, to have more intuitive names. This patch renames tep_is_file_bigendian() to tep_file_bigendian(). Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181201040852.767549746@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse-api.c | 4 ++-- tools/lib/traceevent/event-parse.h | 2 +- tools/lib/traceevent/plugin_kvm.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/lib/traceevent/event-parse-api.c b/tools/lib/traceevent/event-parse-api.c index 8b31c0e00ba3..d463761a58f4 100644 --- a/tools/lib/traceevent/event-parse-api.c +++ b/tools/lib/traceevent/event-parse-api.c @@ -194,13 +194,13 @@ void tep_set_page_size(struct tep_handle *pevent, int _page_size) } /** - * tep_is_file_bigendian - get if the file is in big endian order + * tep_file_bigendian - get if the file is in big endian order * @pevent: a handle to the tep_handle * * This returns if the file is in big endian order * If @pevent is NULL, 0 is returned. */ -int tep_is_file_bigendian(struct tep_handle *pevent) +int tep_file_bigendian(struct tep_handle *pevent) { if(pevent) return pevent->file_bigendian; diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index ac377ae99008..bd1bd9a27839 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -559,7 +559,7 @@ int tep_get_long_size(struct tep_handle *pevent); void tep_set_long_size(struct tep_handle *pevent, int long_size); int tep_get_page_size(struct tep_handle *pevent); void tep_set_page_size(struct tep_handle *pevent, int _page_size); -int tep_is_file_bigendian(struct tep_handle *pevent); +int tep_file_bigendian(struct tep_handle *pevent); void tep_set_file_bigendian(struct tep_handle *pevent, enum tep_endian endian); int tep_is_host_bigendian(struct tep_handle *pevent); void tep_set_host_bigendian(struct tep_handle *pevent, enum tep_endian endian); diff --git a/tools/lib/traceevent/plugin_kvm.c b/tools/lib/traceevent/plugin_kvm.c index 754050eea467..64b9c25a1fd3 100644 --- a/tools/lib/traceevent/plugin_kvm.c +++ b/tools/lib/traceevent/plugin_kvm.c @@ -389,7 +389,7 @@ static int kvm_mmu_print_role(struct trace_seq *s, struct tep_record *record, * We can only use the structure if file is of the same * endianness. */ - if (tep_is_file_bigendian(event->pevent) == + if (tep_file_bigendian(event->pevent) == tep_is_host_bigendian(event->pevent)) { trace_seq_printf(s, "%u q%u%s %s%s %spae %snxe %swp%s%s%s", From 9231967e2f515fce9e19687c0c40dfda416b3512 Mon Sep 17 00:00:00 2001 From: Tzvetomir Stoyanov Date: Fri, 30 Nov 2018 23:08:13 -0500 Subject: [PATCH 106/246] tools lib traceevent: Remove tep_data_event_from_type() API In order to make libtraceevent into a proper library, its API should be straightforward. After discussion with Steven Rostedt, we decided to remove the tep_data_event_from_type() API and to replace it with tep_find_event(), as it does the same. Signed-off-by: Tzvetomir Stoyanov Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Link: http://lkml.kernel.org/r/20181201040852.913841066@goodmis.org Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 12 ------------ tools/lib/traceevent/event-parse.h | 1 - 2 files changed, 13 deletions(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 54d94054eef0..abd4fa5d3088 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -5265,18 +5265,6 @@ int tep_data_type(struct tep_handle *pevent, struct tep_record *rec) return trace_parse_common_type(pevent, rec->data); } -/** - * tep_data_event_from_type - find the event by a given type - * @pevent: a handle to the pevent - * @type: the type of the event. - * - * This returns the event form a given @type; - */ -struct tep_event *tep_data_event_from_type(struct tep_handle *pevent, int type) -{ - return tep_find_event(pevent, type); -} - /** * tep_data_pid - parse the PID from record * @pevent: a handle to the pevent diff --git a/tools/lib/traceevent/event-parse.h b/tools/lib/traceevent/event-parse.h index bd1bd9a27839..aec48f2aea8a 100644 --- a/tools/lib/traceevent/event-parse.h +++ b/tools/lib/traceevent/event-parse.h @@ -526,7 +526,6 @@ tep_find_event_by_record(struct tep_handle *pevent, struct tep_record *record); void tep_data_lat_fmt(struct tep_handle *pevent, struct trace_seq *s, struct tep_record *record); int tep_data_type(struct tep_handle *pevent, struct tep_record *rec); -struct tep_event *tep_data_event_from_type(struct tep_handle *pevent, int type); int tep_data_pid(struct tep_handle *pevent, struct tep_record *rec); int tep_data_preempt_count(struct tep_handle *pevent, struct tep_record *rec); int tep_data_flags(struct tep_handle *pevent, struct tep_record *rec); From f2e14cd2c93699aa0aeaa8240457ab359f1258ff Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 8 Jan 2019 10:56:59 -0300 Subject: [PATCH 107/246] perf top: Lift restriction on using callchains without "sym" in --sort This restriction is not present in 'perf report' and since 'perf top' uses the same hists browser, remove it from it as well. With this we create per event buckets with callchain trees, so that # perf top --sort dso -g --no-children Bucketizes samples by DSO and below it shows the callchains leading to functions in this DSO. Try also: # perf top -e sched:*switch -g --no-children To see the callchains leading to sched switches, pressing 'E' to expand all one can quickly see the most common scheduler switches and what leads to them, for instance, calls to IO, futexes, etc. Acked-by: Namhyung Kim Cc: Adrian Hunter Cc: Jiri Olsa Link: https://lkml.kernel.org/r/20190107140854.GA28965@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index fe3ecfb2e64b..f64e312db787 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1028,12 +1028,7 @@ out_err: static int callchain_param__setup_sample_type(struct callchain_param *callchain) { - if (!perf_hpp_list.sym) { - if (callchain->enabled) { - ui__error("Selected -g but \"sym\" not present in --sort/-s."); - return -EINVAL; - } - } else if (callchain->mode != CHAIN_NONE) { + if (callchain->mode != CHAIN_NONE) { if (callchain_register_param(callchain) < 0) { ui__error("Can't register callchain params.\n"); return -EINVAL; From 58fec830fc19208354895d9832785505046d6c01 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Mon, 7 Jan 2019 22:13:22 -0700 Subject: [PATCH 108/246] vfio/type1: Fix unmap overflow off-by-one The below referenced commit adds a test for integer overflow, but in doing so prevents the unmap ioctl from ever including the last page of the address space. Subtract one to compare to the last address of the unmap to avoid the overflow and wrap-around. Fixes: 71a7d3d78e3c ("vfio/type1: silence integer overflow warning") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291 Cc: stable@vger.kernel.org # v4.15+ Reported-by: Pei Zhang Debugged-by: Peter Xu Reviewed-by: Dan Carpenter Reviewed-by: Peter Xu Tested-by: Peter Xu Reviewed-by: Cornelia Huck Signed-off-by: Alex Williamson --- drivers/vfio/vfio_iommu_type1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 7651cfb14836..73652e21efec 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -878,7 +878,7 @@ static int vfio_dma_do_unmap(struct vfio_iommu *iommu, return -EINVAL; if (!unmap->size || unmap->size & mask) return -EINVAL; - if (unmap->iova + unmap->size < unmap->iova || + if (unmap->iova + unmap->size - 1 < unmap->iova || unmap->size > SIZE_MAX) return -EINVAL; From 250bfc87ddc427fa001bbc8bc1468ce5fc06645b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 8 Jan 2019 13:42:37 -0300 Subject: [PATCH 109/246] tools include uapi: Grab a copy of linux/mount.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We were using a copy of uapi/linux/fs.h to create the mount syscall 'flags' string table to use in 'perf trace', to convert from the number obtained via the raw_syscalls:sys_enter into a string, using tools/perf/trace/beauty/mount_flags.sh, but in e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") those defines got moved to linux/mount.h, so grab a copy of mount.h too. Keep the uapi/linux/fs.h as we'll use it for the SEEK_ constants. Cc: Adrian Hunter Cc: David Howells Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-i2ricmpwpdrpukfq3298jr1z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/mount.h | 58 ++++++++++++++++++++++++++++++++ tools/perf/check-headers.sh | 1 + 2 files changed, 59 insertions(+) create mode 100644 tools/include/uapi/linux/mount.h diff --git a/tools/include/uapi/linux/mount.h b/tools/include/uapi/linux/mount.h new file mode 100644 index 000000000000..3f9ec42510b0 --- /dev/null +++ b/tools/include/uapi/linux/mount.h @@ -0,0 +1,58 @@ +#ifndef _UAPI_LINUX_MOUNT_H +#define _UAPI_LINUX_MOUNT_H + +/* + * These are the fs-independent mount-flags: up to 32 flags are supported + * + * Usage of these is restricted within the kernel to core mount(2) code and + * callers of sys_mount() only. Filesystems should be using the SB_* + * equivalent instead. + */ +#define MS_RDONLY 1 /* Mount read-only */ +#define MS_NOSUID 2 /* Ignore suid and sgid bits */ +#define MS_NODEV 4 /* Disallow access to device special files */ +#define MS_NOEXEC 8 /* Disallow program execution */ +#define MS_SYNCHRONOUS 16 /* Writes are synced at once */ +#define MS_REMOUNT 32 /* Alter flags of a mounted FS */ +#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ +#define MS_DIRSYNC 128 /* Directory modifications are synchronous */ +#define MS_NOATIME 1024 /* Do not update access times. */ +#define MS_NODIRATIME 2048 /* Do not update directory access times */ +#define MS_BIND 4096 +#define MS_MOVE 8192 +#define MS_REC 16384 +#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence. + MS_VERBOSE is deprecated. */ +#define MS_SILENT 32768 +#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */ +#define MS_UNBINDABLE (1<<17) /* change to unbindable */ +#define MS_PRIVATE (1<<18) /* change to private */ +#define MS_SLAVE (1<<19) /* change to slave */ +#define MS_SHARED (1<<20) /* change to shared */ +#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ +#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ +#define MS_I_VERSION (1<<23) /* Update inode I_version field */ +#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ +#define MS_LAZYTIME (1<<25) /* Update the on-disk [acm]times lazily */ + +/* These sb flags are internal to the kernel */ +#define MS_SUBMOUNT (1<<26) +#define MS_NOREMOTELOCK (1<<27) +#define MS_NOSEC (1<<28) +#define MS_BORN (1<<29) +#define MS_ACTIVE (1<<30) +#define MS_NOUSER (1<<31) + +/* + * Superblock flags that can be altered by MS_REMOUNT + */ +#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION|\ + MS_LAZYTIME) + +/* + * Old magic mount flag and mask + */ +#define MS_MGC_VAL 0xC0ED0000 +#define MS_MGC_MSK 0xffff0000 + +#endif /* _UAPI_LINUX_MOUNT_H */ diff --git a/tools/perf/check-headers.sh b/tools/perf/check-headers.sh index 6cb98f8570a2..b51e952ab35f 100755 --- a/tools/perf/check-headers.sh +++ b/tools/perf/check-headers.sh @@ -10,6 +10,7 @@ include/uapi/linux/fs.h include/uapi/linux/kcmp.h include/uapi/linux/kvm.h include/uapi/linux/in.h +include/uapi/linux/mount.h include/uapi/linux/perf_event.h include/uapi/linux/prctl.h include/uapi/linux/sched.h From 1c23397d2a6a077ab32f01c01406c2fe61b7b3a4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 8 Jan 2019 13:46:43 -0300 Subject: [PATCH 110/246] perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As now we'll update our fs.h copy and what tools/perf/trace/beauty/mount_flags.sh needs just got moved to mount.h, use that instead. Cc: Adrian Hunter Cc: David Howells Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-ls19h376xukeouxrw9dswkcn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/trace/beauty/mount_flags.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/trace/beauty/mount_flags.sh b/tools/perf/trace/beauty/mount_flags.sh index 45547573a1db..847850b2ef6c 100755 --- a/tools/perf/trace/beauty/mount_flags.sh +++ b/tools/perf/trace/beauty/mount_flags.sh @@ -5,11 +5,11 @@ printf "static const char *mount_flags[] = {\n" regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MS_([[:alnum:]_]+)[[:space:]]+([[:digit:]]+)[[:space:]]*.*' -egrep $regex ${header_dir}/fs.h | egrep -v '(MSK|VERBOSE|MGC_VAL)\>' | \ +egrep $regex ${header_dir}/mount.h | egrep -v '(MSK|VERBOSE|MGC_VAL)\>' | \ sed -r "s/$regex/\2 \2 \1/g" | sort -n | \ xargs printf "\t[%s ? (ilog2(%s) + 1) : 0] = \"%s\",\n" regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MS_([[:alnum:]_]+)[[:space:]]+\(1<<([[:digit:]]+)\)[[:space:]]*.*' -egrep $regex ${header_dir}/fs.h | \ +egrep $regex ${header_dir}/mount.h | \ sed -r "s/$regex/\2 \1/g" | \ xargs printf "\t[%s + 1] = \"%s\",\n" printf "};\n" From fdc42ca190c7d8976f4f9240752f0bd008270b72 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 8 Jan 2019 13:48:14 -0300 Subject: [PATCH 111/246] tools include uapi: Sync linux/fs.h copy with the kernel sources MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To get the changes in: e262e32d6bde ("vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") That made the mount flags string table generator to switch to using mount.h instead. This silences the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Adrian Hunter Cc: David Howells Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-mosz81pa6iwxko4p2owbm3ss@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/fs.h | 60 +++++------------------------------ 1 file changed, 8 insertions(+), 52 deletions(-) diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h index a441ea1bfe6d..121e82ce296b 100644 --- a/tools/include/uapi/linux/fs.h +++ b/tools/include/uapi/linux/fs.h @@ -14,6 +14,11 @@ #include #include +/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */ +#if !defined(__KERNEL__) +#include +#endif + /* * It's silly to have NR_OPEN bigger than NR_FILE, but you can change * the file limit at runtime and only root can increase the per-process @@ -101,57 +106,6 @@ struct inodes_stat_t { #define NR_FILE 8192 /* this can well be larger on a larger system */ - -/* - * These are the fs-independent mount-flags: up to 32 flags are supported - */ -#define MS_RDONLY 1 /* Mount read-only */ -#define MS_NOSUID 2 /* Ignore suid and sgid bits */ -#define MS_NODEV 4 /* Disallow access to device special files */ -#define MS_NOEXEC 8 /* Disallow program execution */ -#define MS_SYNCHRONOUS 16 /* Writes are synced at once */ -#define MS_REMOUNT 32 /* Alter flags of a mounted FS */ -#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ -#define MS_DIRSYNC 128 /* Directory modifications are synchronous */ -#define MS_NOATIME 1024 /* Do not update access times. */ -#define MS_NODIRATIME 2048 /* Do not update directory access times */ -#define MS_BIND 4096 -#define MS_MOVE 8192 -#define MS_REC 16384 -#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence. - MS_VERBOSE is deprecated. */ -#define MS_SILENT 32768 -#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */ -#define MS_UNBINDABLE (1<<17) /* change to unbindable */ -#define MS_PRIVATE (1<<18) /* change to private */ -#define MS_SLAVE (1<<19) /* change to slave */ -#define MS_SHARED (1<<20) /* change to shared */ -#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ -#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ -#define MS_I_VERSION (1<<23) /* Update inode I_version field */ -#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ -#define MS_LAZYTIME (1<<25) /* Update the on-disk [acm]times lazily */ - -/* These sb flags are internal to the kernel */ -#define MS_SUBMOUNT (1<<26) -#define MS_NOREMOTELOCK (1<<27) -#define MS_NOSEC (1<<28) -#define MS_BORN (1<<29) -#define MS_ACTIVE (1<<30) -#define MS_NOUSER (1<<31) - -/* - * Superblock flags that can be altered by MS_REMOUNT - */ -#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION|\ - MS_LAZYTIME) - -/* - * Old magic mount flag and mask - */ -#define MS_MGC_VAL 0xC0ED0000 -#define MS_MGC_MSK 0xffff0000 - /* * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR. */ @@ -269,7 +223,8 @@ struct fsxattr { #define FS_POLICY_FLAGS_PAD_16 0x02 #define FS_POLICY_FLAGS_PAD_32 0x03 #define FS_POLICY_FLAGS_PAD_MASK 0x03 -#define FS_POLICY_FLAGS_VALID 0x03 +#define FS_POLICY_FLAG_DIRECT_KEY 0x04 /* use master key directly */ +#define FS_POLICY_FLAGS_VALID 0x07 /* Encryption algorithms */ #define FS_ENCRYPTION_MODE_INVALID 0 @@ -281,6 +236,7 @@ struct fsxattr { #define FS_ENCRYPTION_MODE_AES_128_CTS 6 #define FS_ENCRYPTION_MODE_SPECK128_256_XTS 7 /* Removed, do not use. */ #define FS_ENCRYPTION_MODE_SPECK128_256_CTS 8 /* Removed, do not use. */ +#define FS_ENCRYPTION_MODE_ADIANTUM 9 struct fscrypt_policy { __u8 version; From ee412f14693a3fe2645b3528603dfd37dd05118a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 8 Jan 2019 13:53:23 -0300 Subject: [PATCH 112/246] tools include uapi: Sync linux/vhost.h with the kernel sources MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To get the changes in: 4b86713236e4 ("vhost: split structs into a separate header file") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h Those didn't touch things used in tools, i.e. the following continues working: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh static const char *vhost_virtio_ioctl_cmds[] = { [0x00] = "SET_FEATURES", [0x01] = "SET_OWNER", [0x02] = "RESET_OWNER", [0x03] = "SET_MEM_TABLE", [0x04] = "SET_LOG_BASE", [0x07] = "SET_LOG_FD", [0x10] = "SET_VRING_NUM", [0x11] = "SET_VRING_ADDR", [0x12] = "SET_VRING_BASE", [0x13] = "SET_VRING_ENDIAN", [0x14] = "GET_VRING_ENDIAN", [0x20] = "SET_VRING_KICK", [0x21] = "SET_VRING_CALL", [0x22] = "SET_VRING_ERR", [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT", [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT", [0x25] = "SET_BACKEND_FEATURES", [0x30] = "NET_SET_BACKEND", [0x40] = "SCSI_SET_ENDPOINT", [0x41] = "SCSI_CLEAR_ENDPOINT", [0x42] = "SCSI_GET_ABI_VERSION", [0x43] = "SCSI_SET_EVENTS_MISSED", [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", [0x26] = "GET_BACKEND_FEATURES", }; $ At some point in the eBPFication of perf, using something like: # perf trace -e ioctl(cmd=VHOST_VRING*) Will setup a BPF filter right at the raw_syscalls:sys_enter tracepoint, i.e. filtering at the origin. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Michael S. Tsirkin Cc: Namhyung Kim Cc: Paolo Bonzini Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-g28usrt7l59lwq3wuh8vzbig@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/vhost.h | 113 +------------------------------ 1 file changed, 2 insertions(+), 111 deletions(-) diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h index 84c3de89696a..40d028eed645 100644 --- a/tools/include/uapi/linux/vhost.h +++ b/tools/include/uapi/linux/vhost.h @@ -11,94 +11,9 @@ * device configuration. */ +#include #include -#include #include -#include -#include - -struct vhost_vring_state { - unsigned int index; - unsigned int num; -}; - -struct vhost_vring_file { - unsigned int index; - int fd; /* Pass -1 to unbind from file. */ - -}; - -struct vhost_vring_addr { - unsigned int index; - /* Option flags. */ - unsigned int flags; - /* Flag values: */ - /* Whether log address is valid. If set enables logging. */ -#define VHOST_VRING_F_LOG 0 - - /* Start of array of descriptors (virtually contiguous) */ - __u64 desc_user_addr; - /* Used structure address. Must be 32 bit aligned */ - __u64 used_user_addr; - /* Available structure address. Must be 16 bit aligned */ - __u64 avail_user_addr; - /* Logging support. */ - /* Log writes to used structure, at offset calculated from specified - * address. Address must be 32 bit aligned. */ - __u64 log_guest_addr; -}; - -/* no alignment requirement */ -struct vhost_iotlb_msg { - __u64 iova; - __u64 size; - __u64 uaddr; -#define VHOST_ACCESS_RO 0x1 -#define VHOST_ACCESS_WO 0x2 -#define VHOST_ACCESS_RW 0x3 - __u8 perm; -#define VHOST_IOTLB_MISS 1 -#define VHOST_IOTLB_UPDATE 2 -#define VHOST_IOTLB_INVALIDATE 3 -#define VHOST_IOTLB_ACCESS_FAIL 4 - __u8 type; -}; - -#define VHOST_IOTLB_MSG 0x1 -#define VHOST_IOTLB_MSG_V2 0x2 - -struct vhost_msg { - int type; - union { - struct vhost_iotlb_msg iotlb; - __u8 padding[64]; - }; -}; - -struct vhost_msg_v2 { - __u32 type; - __u32 reserved; - union { - struct vhost_iotlb_msg iotlb; - __u8 padding[64]; - }; -}; - -struct vhost_memory_region { - __u64 guest_phys_addr; - __u64 memory_size; /* bytes */ - __u64 userspace_addr; - __u64 flags_padding; /* No flags are currently specified. */ -}; - -/* All region addresses and sizes must be 4K aligned. */ -#define VHOST_PAGE_SIZE 0x1000 - -struct vhost_memory { - __u32 nregions; - __u32 padding; - struct vhost_memory_region regions[0]; -}; /* ioctls */ @@ -186,31 +101,7 @@ struct vhost_memory { * device. This can be used to stop the ring (e.g. for migration). */ #define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file) -/* Feature bits */ -/* Log all write descriptors. Can be changed while device is active. */ -#define VHOST_F_LOG_ALL 26 -/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */ -#define VHOST_NET_F_VIRTIO_NET_HDR 27 - -/* VHOST_SCSI specific definitions */ - -/* - * Used by QEMU userspace to ensure a consistent vhost-scsi ABI. - * - * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate + - * RFC-v2 vhost-scsi userspace. Add GET_ABI_VERSION ioctl usage - * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target. - * All the targets under vhost_wwpn can be seen and used by guset. - */ - -#define VHOST_SCSI_ABI_VERSION 1 - -struct vhost_scsi_target { - int abi_version; - char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */ - unsigned short vhost_tpgt; - unsigned short reserved; -}; +/* VHOST_SCSI specific defines */ #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target) #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target) From 7b55851367136b1efd84d98fea81ba57a98304cf Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Tue, 8 Jan 2019 13:58:52 +0100 Subject: [PATCH 113/246] fork: record start_time late This changes the fork(2) syscall to record the process start_time after initializing the basic task structure but still before making the new process visible to user-space. Technically, we could record the start_time anytime during fork(2). But this might lead to scenarios where a start_time is recorded long before a process becomes visible to user-space. For instance, with userfaultfd(2) and TLS, user-space can delay the execution of fork(2) for an indefinite amount of time (and will, if this causes network access, or similar). By recording the start_time late, it much closer reflects the point in time where the process becomes live and can be observed by other processes. Lastly, this makes it much harder for user-space to predict and control the start_time they get assigned. Previously, user-space could fork a process and stall it in copy_thread_tls() before its pid is allocated, but after its start_time is recorded. This can be misused to later-on cycle through PIDs and resume the stalled fork(2) yielding a process that has the same pid and start_time as a process that existed before. This can be used to circumvent security systems that identify processes by their pid+start_time combination. Even though user-space was always aware that start_time recording is flaky (but several projects are known to still rely on start_time-based identification), changing the start_time to be recorded late will help mitigate existing attacks and make it much harder for user-space to control the start_time a process gets assigned. Reported-by: Jann Horn Signed-off-by: Tom Gundersen Signed-off-by: David Herrmann Signed-off-by: Linus Torvalds --- kernel/fork.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index a60459947f18..7f49be94eba9 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1833,8 +1833,6 @@ static __latent_entropy struct task_struct *copy_process( posix_cpu_timers_init(p); - p->start_time = ktime_get_ns(); - p->real_start_time = ktime_get_boot_ns(); p->io_context = NULL; audit_set_context(p, NULL); cgroup_fork(p); @@ -2000,6 +1998,17 @@ static __latent_entropy struct task_struct *copy_process( if (retval) goto bad_fork_free_pid; + /* + * From this point on we must avoid any synchronous user-space + * communication until we take the tasklist-lock. In particular, we do + * not want user-space to be able to predict the process start-time by + * stalling fork(2) after we recorded the start_time but before it is + * visible to the system. + */ + + p->start_time = ktime_get_ns(); + p->real_start_time = ktime_get_boot_ns(); + /* * Make it visible to the rest of the system, but dont wake it up yet. * Need tasklist lock for parent etc handling! From 8139d493daf1ef19d34192f95e92e19dc19b648a Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 7 Jan 2019 18:38:30 +0800 Subject: [PATCH 114/246] drm/amd/powerplay: update OD support flag for SKU with no OD capabilities For those ASICs with no overdrive capabilities, the OD support flag will be reset. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index ea0b52d46fe9..74c9bdf6f79f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -980,6 +980,9 @@ static int vega20_od8_set_feature_capabilities( pp_table->FanZeroRpmEnable) od_settings->overdrive8_capabilities |= OD8_FAN_ZERO_RPM_CONTROL; + if (!od_settings->overdrive8_capabilities) + hwmgr->od_enabled = false; + return 0; } From 0624e145fb2ba87c752bec355af12f43cb52cd68 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 7 Jan 2019 18:56:14 +0800 Subject: [PATCH 115/246] drm/amd/powerplay: create pp_od_clk_voltage device file under OD support Since pp_od_clk_voltage device file is for OD related sysfs operations. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 1f61ed95727c..6896dec97fc7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -2008,6 +2008,7 @@ void amdgpu_pm_print_power_states(struct amdgpu_device *adev) int amdgpu_pm_sysfs_init(struct amdgpu_device *adev) { + struct pp_hwmgr *hwmgr = adev->powerplay.pp_handle; int ret; if (adev->pm.sysfs_initialized) @@ -2091,12 +2092,14 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev) "pp_power_profile_mode\n"); return ret; } - ret = device_create_file(adev->dev, - &dev_attr_pp_od_clk_voltage); - if (ret) { - DRM_ERROR("failed to create device file " - "pp_od_clk_voltage\n"); - return ret; + if (hwmgr->od_enabled) { + ret = device_create_file(adev->dev, + &dev_attr_pp_od_clk_voltage); + if (ret) { + DRM_ERROR("failed to create device file " + "pp_od_clk_voltage\n"); + return ret; + } } ret = device_create_file(adev->dev, &dev_attr_gpu_busy_percent); @@ -2118,6 +2121,8 @@ int amdgpu_pm_sysfs_init(struct amdgpu_device *adev) void amdgpu_pm_sysfs_fini(struct amdgpu_device *adev) { + struct pp_hwmgr *hwmgr = adev->powerplay.pp_handle; + if (adev->pm.dpm_enabled == 0) return; @@ -2138,8 +2143,9 @@ void amdgpu_pm_sysfs_fini(struct amdgpu_device *adev) device_remove_file(adev->dev, &dev_attr_pp_mclk_od); device_remove_file(adev->dev, &dev_attr_pp_power_profile_mode); - device_remove_file(adev->dev, - &dev_attr_pp_od_clk_voltage); + if (hwmgr->od_enabled) + device_remove_file(adev->dev, + &dev_attr_pp_od_clk_voltage); device_remove_file(adev->dev, &dev_attr_gpu_busy_percent); } From fff0d3f7686942bd544b53a48d1b76bd62c46946 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Tue, 8 Jan 2019 10:33:35 +0800 Subject: [PATCH 116/246] drm/amd/powerplay: avoid possible buffer overflow Make sure the clock level enforced is within the allowed ranges. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Reviewed-by: Likun Gao Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 74c9bdf6f79f..205fac8d2bc8 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -2241,6 +2241,13 @@ static int vega20_force_clock_level(struct pp_hwmgr *hwmgr, soft_min_level = mask ? (ffs(mask) - 1) : 0; soft_max_level = mask ? (fls(mask) - 1) : 0; + if (soft_max_level >= data->dpm_table.gfx_table.count) { + pr_err("Clock level specified %d is over max allowed %d\n", + soft_max_level, + data->dpm_table.gfx_table.count - 1); + return -EINVAL; + } + data->dpm_table.gfx_table.dpm_state.soft_min_level = data->dpm_table.gfx_table.dpm_levels[soft_min_level].value; data->dpm_table.gfx_table.dpm_state.soft_max_level = @@ -2261,6 +2268,13 @@ static int vega20_force_clock_level(struct pp_hwmgr *hwmgr, soft_min_level = mask ? (ffs(mask) - 1) : 0; soft_max_level = mask ? (fls(mask) - 1) : 0; + if (soft_max_level >= data->dpm_table.mem_table.count) { + pr_err("Clock level specified %d is over max allowed %d\n", + soft_max_level, + data->dpm_table.mem_table.count - 1); + return -EINVAL; + } + data->dpm_table.mem_table.dpm_state.soft_min_level = data->dpm_table.mem_table.dpm_levels[soft_min_level].value; data->dpm_table.mem_table.dpm_state.soft_max_level = From fadcb8f9fc89f7b517ce48f30e0b607b16d99d63 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Tue, 8 Jan 2019 12:22:24 +0800 Subject: [PATCH 117/246] drm/amd/powerplay: drop the unnecessary uclk hard min setting Since soft min setting is enough. Hard min setting is redundant. Reported-by: Likun Gao Signed-off-by: Evan Quan Acked-by: Alex Deucher Reviewed-by: Likun Gao Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 205fac8d2bc8..5824213d5b50 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -1690,13 +1690,6 @@ static int vega20_upload_dpm_min_level(struct pp_hwmgr *hwmgr) (PPCLK_UCLK << 16) | (min_freq & 0xffff))), "Failed to set soft min memclk !", return ret); - - min_freq = data->dpm_table.mem_table.dpm_state.hard_min_level; - PP_ASSERT_WITH_CODE(!(ret = smum_send_msg_to_smc_with_parameter( - hwmgr, PPSMC_MSG_SetHardMinByFreq, - (PPCLK_UCLK << 16) | (min_freq & 0xffff))), - "Failed to set hard min memclk !", - return ret); } if (data->smu_features[GNLD_DPM_UVD].enabled) { From 89f23b6efef554766177bf51aa754bce14c3e7da Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Mon, 7 Jan 2019 15:51:14 -0700 Subject: [PATCH 118/246] drm/amdgpu: validate user pitch alignment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Userspace may request pitch alignment that is not supported by GPU. Some requests 32, but GPU ignores it and uses default 64 when cpp is 4. If GEM object is allocated based on the smaller alignment, GPU DMA will go out of bound. Cc: stable@vger.kernel.org # v4.2+ Reviewed-by: Michel Dänzer Signed-off-by: Yu Zhao Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index b083b219b1a9..cb72d9675ab1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -531,6 +531,16 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev, struct drm_gem_object *obj; struct amdgpu_framebuffer *amdgpu_fb; int ret; + struct amdgpu_device *adev = dev->dev_private; + int cpp = drm_format_plane_cpp(mode_cmd->pixel_format, 0); + int pitch = mode_cmd->pitches[0] / cpp; + + pitch = amdgpu_align_pitch(adev, pitch, cpp, false); + if (mode_cmd->pitches[0] != pitch) { + DRM_DEBUG_KMS("Invalid pitch: expecting %d but got %d\n", + pitch, mode_cmd->pitches[0]); + return ERR_PTR(-EINVAL); + } obj = drm_gem_object_lookup(file_priv, mode_cmd->handles[0]); if (obj == NULL) { From c4a32b266da7bb702e60381ca0c35eaddbc89a6c Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Mon, 7 Jan 2019 15:51:15 -0700 Subject: [PATCH 119/246] drm/amdgpu: validate user GEM object size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When creating frame buffer, userspace may request to attach to a previously allocated GEM object that is smaller than what GPU requires. Validation must be done to prevent out-of-bound DMA, otherwise it could be exploited to reveal sensitive data. This fix is not done in a common code path because individual driver might have different requirement. Cc: stable@vger.kernel.org # v4.2+ Reviewed-by: Michel Dänzer Signed-off-by: Yu Zhao Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index cb72d9675ab1..dafc645b2e4e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -531,6 +531,7 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev, struct drm_gem_object *obj; struct amdgpu_framebuffer *amdgpu_fb; int ret; + int height; struct amdgpu_device *adev = dev->dev_private; int cpp = drm_format_plane_cpp(mode_cmd->pixel_format, 0); int pitch = mode_cmd->pitches[0] / cpp; @@ -555,6 +556,13 @@ amdgpu_display_user_framebuffer_create(struct drm_device *dev, return ERR_PTR(-EINVAL); } + height = ALIGN(mode_cmd->height, 8); + if (obj->size < pitch * height) { + DRM_DEBUG_KMS("Invalid GEM size: expecting >= %d but got %zu\n", + pitch * height, obj->size); + return ERR_PTR(-EINVAL); + } + amdgpu_fb = kzalloc(sizeof(*amdgpu_fb), GFP_KERNEL); if (amdgpu_fb == NULL) { drm_gem_object_put_unlocked(obj); From f5c9571e2265b3cbfad2ed41ba60c3da474daa61 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Amadeusz=20S=C5=82awi=C5=84ski?= Date: Tue, 8 Jan 2019 21:03:11 +0100 Subject: [PATCH 120/246] ALSA: usb-audio: fix CM6206 register definitions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix typo after a recent commit causing headphones to have no sound Fixes: ad43d528a7ac (ALSA: usb-audio: Define registers for CM6206) Signed-off-by: Amadeusz Sławiński Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 96340f23f86d..ebbadb3a7094 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -768,7 +768,7 @@ static int snd_usb_cm6206_boot_quirk(struct usb_device *dev) * REG1: PLL binary search enable, soft mute enable. */ CM6206_REG1_PLLBIN_EN | - CM6206_REG1_SOFT_MUTE_EN | + CM6206_REG1_SOFT_MUTE_EN, /* * REG2: enable output drivers, * select front channels to the headphone output, From fe7553bef8d676d1d8b40666868b33ec39b9df5d Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 8 Jan 2019 16:11:27 -0500 Subject: [PATCH 121/246] drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume() drm_dp_mst_topology_mgr_resume() returns whether or not it managed to find the topology in question after a suspend resume cycle, and the driver is supposed to check this value and disable MST accordingly if it's gone-in addition to sending a hotplug in order to notify userspace that something changed during suspend. Currently, amdgpu just makes the mistake of ignoring the return code from drm_dp_mst_topology_mgr_resume() which means that if a topology was removed in suspend, amdgpu never notices and assumes it's still connected which leads to all sorts of problems. So, fix this by actually checking the rc from drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the function while we're at it to fix the over-indenting. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Cc: Jerry Zuo Cc: # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 32 +++++++++++++------ 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index a9a28dbc3e24..127b1e8f58e6 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -699,22 +699,36 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend) { struct amdgpu_dm_connector *aconnector; struct drm_connector *connector; + struct drm_dp_mst_topology_mgr *mgr; + int ret; + bool need_hotplug = false; drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - aconnector = to_amdgpu_dm_connector(connector); - if (aconnector->dc_link->type == dc_connection_mst_branch && - !aconnector->mst_port) { + list_for_each_entry(connector, &dev->mode_config.connector_list, + head) { + aconnector = to_amdgpu_dm_connector(connector); + if (aconnector->dc_link->type != dc_connection_mst_branch || + aconnector->mst_port) + continue; - if (suspend) - drm_dp_mst_topology_mgr_suspend(&aconnector->mst_mgr); - else - drm_dp_mst_topology_mgr_resume(&aconnector->mst_mgr); - } + mgr = &aconnector->mst_mgr; + + if (suspend) { + drm_dp_mst_topology_mgr_suspend(mgr); + } else { + ret = drm_dp_mst_topology_mgr_resume(mgr); + if (ret < 0) { + drm_dp_mst_topology_mgr_set_mst(mgr, false); + need_hotplug = true; + } + } } drm_modeset_unlock(&dev->mode_config.connection_mutex); + + if (need_hotplug) + drm_kms_helper_hotplug_event(dev); } /** From 2d1af6a11cb9d88e0e3dd10258904c437fe1b315 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 8 Jan 2019 16:11:28 -0500 Subject: [PATCH 122/246] drm/amdgpu: Don't fail resume process if resuming atomic state fails This is an ugly one unfortunately. Currently, all DRM drivers supporting atomic modesetting will save the state that userspace had set before suspending, then attempt to restore that state on resume. This probably worked very well at one point, like many other things, until DP MST came into the picture. While it's easy to restore state on normal display connectors that were disconnected during suspend regardless of their state post-resume, this can't really be done with MST because of the fact that setting up a downstream sink requires performing sideband transactions between the source and the MST hub, sending out the ACT packets, etc. Because of this, there isn't really a guarantee that we can restore the atomic state we had before suspend once we've resumed. This sucks pretty bad, but so far I haven't run into any compositors that this actually causes serious issues with. Most compositors will notice the hotplug we send afterwards, and then reprobe state. Since nouveau and i915 also don't fail the suspend/resume process due to failing to restore the atomic state, let's make amdgpu match this behavior. Better to resume the GPU properly, then to stop the process half way because of a potentially unavoidable atomic commit failure. Eventually, we'll have a real fix for this problem on the DRM level. But we've got some more important low-hanging fruit to deal with first. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Cc: Jerry Zuo Cc: # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 127b1e8f58e6..34f35e9a3c46 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -912,7 +912,6 @@ static int dm_resume(void *handle) struct drm_plane_state *new_plane_state; struct dm_plane_state *dm_new_plane_state; enum dc_connection_type new_connection_type = dc_connection_none; - int ret; int i; /* power on hardware */ @@ -985,13 +984,13 @@ static int dm_resume(void *handle) } } - ret = drm_atomic_helper_resume(ddev, dm->cached_state); + drm_atomic_helper_resume(ddev, dm->cached_state); dm->cached_state = NULL; amdgpu_dm_irq_resume_late(adev); - return ret; + return 0; } /** From c235316d935a19deedc2fc48076798c9a56e1a7c Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 8 Jan 2019 16:11:29 -0500 Subject: [PATCH 123/246] drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume() Since I've had to fix two cases of drivers not checking the return code from this function, let's make the compiler complain so this doesn't come up again in the future. Changes since v1: * Remove unneeded __must_check in function declaration - danvet Signed-off-by: Lyude Paul Cc: Jerry Zuo Reviewed-by: Daniel Vetter Reviewed-by: Harry Wentland Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-4-lyude@redhat.com --- include/drm/drm_dp_mst_helper.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 59f005b419cf..727af08e5ea6 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -616,7 +616,8 @@ void drm_dp_mst_dump_topology(struct seq_file *m, struct drm_dp_mst_topology_mgr *mgr); void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); -int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); +int __must_check +drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); struct drm_dp_mst_topology_state *drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr); int drm_dp_atomic_find_vcpi_slots(struct drm_atomic_state *state, From 19a220dd1e8a1b1d8e5e2f8f4a25313c4b02d527 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 28 Aug 2018 14:27:35 +0200 Subject: [PATCH 124/246] arm64: defconfig: enable modules for amlogic s400 sound card Compile the necessary drivers as modules, including codecs, for the s400 sound card. Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman --- arch/arm64/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 3ef443cfbab6..c8432e24207e 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -506,11 +506,15 @@ CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m CONFIG_SND_SOC_RK3399_GRU_SOUND=m +CONFIG_SND_MESON_AXG_SOUND_CARD=m CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_AK4613=m CONFIG_SND_SIMPLE_CARD=m CONFIG_SND_AUDIO_GRAPH_CARD=m +CONFIG_SND_SOC_ES7134=m +CONFIG_SND_SOC_ES7241=m +CONFIG_SND_SOC_TAS571X=m CONFIG_I2C_HID=m CONFIG_USB=y CONFIG_USB_OTG=y From 1d69a3f8ae77e3dbfdc1356225cce5ea9c366aec Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Tue, 8 Jan 2019 15:22:53 -0800 Subject: [PATCH 125/246] zram: idle writeback fixes and cleanup This patch includes some fixes and cleanup for idle-page writeback. 1. writeback_limit interface Now writeback_limit interface is rather conusing. For example, once writeback limit budget is exausted, admin can see 0 from /sys/block/zramX/writeback_limit which is same semantic with disable writeback_limit at this moment. IOW, admin cannot tell that zero came from disable writeback limit or exausted writeback limit. To make the interface clear, let's sepatate enable of writeback limit to another knob - /sys/block/zram0/writeback_limit_enable * before: while true : # to re-enable writeback limit once previous one is used up echo 0 > /sys/block/zram0/writeback_limit echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget * new # To enable writeback limit, from the beginning, admin should # enable it. echo $((200<<20)) > /sys/block/zram0/writeback_limit echo 1 > /sys/block/zram/0/writeback_limit_enable while true : echo $((200<<20)) > /sys/block/zram0/writeback_limit .. .. # used up the writeback limit budget It's much strightforward. 2. fix condition check idle/huge writeback mode check The mode in writeback_store is not bit opeartion any more so no need to use bit operations. Furthermore, current condition check is broken in that it does writeback every pages regardless of huge/idle. 3. clean up idle_store No need to use goto. [minchan@kernel.org: missed spin_lock_init] Link: http://lkml.kernel.org/r/20190103001601.GA255139@google.com Link: http://lkml.kernel.org/r/20181224033529.19450-1-minchan@kernel.org Signed-off-by: Minchan Kim Suggested-by: John Dias Cc: Sergey Senozhatsky Cc: John Dias Cc: Srinivas Paladugu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-block-zram | 11 ++- Documentation/blockdev/zram.txt | 74 +++++++++++------- drivers/block/zram/zram_drv.c | 90 ++++++++++++++++------ drivers/block/zram/zram_drv.h | 5 +- 4 files changed, 125 insertions(+), 55 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index 9d2339a485c8..14b2bf2e5105 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -122,11 +122,18 @@ Description: statistics (bd_count, bd_reads, bd_writes) in a format similar to block layer statistics file format. +What: /sys/block/zram/writeback_limit_enable +Date: November 2018 +Contact: Minchan Kim +Description: + The writeback_limit_enable file is read-write and specifies + eanbe of writeback_limit feature. "1" means eable the feature. + No limit "0" is the initial state. + What: /sys/block/zram/writeback_limit Date: November 2018 Contact: Minchan Kim Description: The writeback_limit file is read-write and specifies the maximum amount of writeback ZRAM can do. The limit could be changed - in run time and "0" means disable the limit. - No limit is the initial state. + in run time. diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt index 436c5e98e1b6..4df0ce271085 100644 --- a/Documentation/blockdev/zram.txt +++ b/Documentation/blockdev/zram.txt @@ -156,22 +156,23 @@ Per-device statistics are exported as various nodes under /sys/block/zram/ A brief description of exported device attributes. For more details please read Documentation/ABI/testing/sysfs-block-zram. -Name access description ----- ------ ----------- -disksize RW show and set the device's disk size -initstate RO shows the initialization state of the device -reset WO trigger device reset -mem_used_max WO reset the `mem_used_max' counter (see later) -mem_limit WO specifies the maximum amount of memory ZRAM can use - to store the compressed data -writeback_limit WO specifies the maximum amount of write IO zram can - write out to backing device as 4KB unit -max_comp_streams RW the number of possible concurrent compress operations -comp_algorithm RW show and change the compression algorithm -compact WO trigger memory compaction -debug_stat RO this file is used for zram debugging purposes -backing_dev RW set up backend storage for zram to write out -idle WO mark allocated slot as idle +Name access description +---- ------ ----------- +disksize RW show and set the device's disk size +initstate RO shows the initialization state of the device +reset WO trigger device reset +mem_used_max WO reset the `mem_used_max' counter (see later) +mem_limit WO specifies the maximum amount of memory ZRAM can use + to store the compressed data +writeback_limit WO specifies the maximum amount of write IO zram can + write out to backing device as 4KB unit +writeback_limit_enable RW show and set writeback_limit feature +max_comp_streams RW the number of possible concurrent compress operations +comp_algorithm RW show and change the compression algorithm +compact WO trigger memory compaction +debug_stat RO this file is used for zram debugging purposes +backing_dev RW set up backend storage for zram to write out +idle WO mark allocated slot as idle User space is advised to use the following files to read the device statistics. @@ -280,32 +281,51 @@ With the command, zram writeback idle pages from memory to the storage. If there are lots of write IO with flash device, potentially, it has flash wearout problem so that admin needs to design write limitation to guarantee storage health for entire product life. -To overcome the concern, zram supports "writeback_limit". -The "writeback_limit"'s default value is 0 so that it doesn't limit -any writeback. If admin want to measure writeback count in a certain -period, he could know it via /sys/block/zram0/bd_stat's 3rd column. + +To overcome the concern, zram supports "writeback_limit" feature. +The "writeback_limit_enable"'s default value is 0 so that it doesn't limit +any writeback. IOW, if admin want to apply writeback budget, he should +enable writeback_limit_enable via + + $ echo 1 > /sys/block/zramX/writeback_limit_enable + +Once writeback_limit_enable is set, zram doesn't allow any writeback +until admin set the budget via /sys/block/zramX/writeback_limit. + +(If admin doesn't enable writeback_limit_enable, writeback_limit's value +assigned via /sys/block/zramX/writeback_limit is meaninless.) If admin want to limit writeback as per-day 400M, he could do it like below. - MB_SHIFT=20 - 4K_SHIFT=12 - echo $((400<>4K_SHIFT)) > \ - /sys/block/zram0/writeback_limit. + $ MB_SHIFT=20 + $ 4K_SHIFT=12 + $ echo $((400<>4K_SHIFT)) > \ + /sys/block/zram0/writeback_limit. + $ echo 1 > /sys/block/zram0/writeback_limit_enable -If admin want to allow further write again, he could do it like below +If admin want to allow further write again once the bugdet is exausted, +he could do it like below - echo 0 > /sys/block/zram0/writeback_limit + $ echo $((400<>4K_SHIFT)) > \ + /sys/block/zram0/writeback_limit If admin want to see remaining writeback budget since he set, - cat /sys/block/zram0/writeback_limit + $ cat /sys/block/zramX/writeback_limit + +If admin want to disable writeback limit, he could do + + $ echo 0 > /sys/block/zramX/writeback_limit_enable The writeback_limit count will reset whenever you reset zram(e.g., system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of writeback happened until you reset the zram to allocate extra writeback budget in next setting is user's job. +If admin want to measure writeback count in a certain period, he could +know it via /sys/block/zram0/bd_stat's 3rd column. + = memory tracking With CONFIG_ZRAM_MEMORY_TRACKING, user can know information of the diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 33c5cc879f24..04ca65912638 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -316,11 +316,9 @@ static ssize_t idle_store(struct device *dev, * See the comment in writeback_store. */ zram_slot_lock(zram, index); - if (!zram_allocated(zram, index) || - zram_test_flag(zram, index, ZRAM_UNDER_WB)) - goto next; - zram_set_flag(zram, index, ZRAM_IDLE); -next: + if (zram_allocated(zram, index) && + !zram_test_flag(zram, index, ZRAM_UNDER_WB)) + zram_set_flag(zram, index, ZRAM_IDLE); zram_slot_unlock(zram, index); } @@ -330,6 +328,41 @@ next: } #ifdef CONFIG_ZRAM_WRITEBACK +static ssize_t writeback_limit_enable_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) +{ + struct zram *zram = dev_to_zram(dev); + u64 val; + ssize_t ret = -EINVAL; + + if (kstrtoull(buf, 10, &val)) + return ret; + + down_read(&zram->init_lock); + spin_lock(&zram->wb_limit_lock); + zram->wb_limit_enable = val; + spin_unlock(&zram->wb_limit_lock); + up_read(&zram->init_lock); + ret = len; + + return ret; +} + +static ssize_t writeback_limit_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + bool val; + struct zram *zram = dev_to_zram(dev); + + down_read(&zram->init_lock); + spin_lock(&zram->wb_limit_lock); + val = zram->wb_limit_enable; + spin_unlock(&zram->wb_limit_lock); + up_read(&zram->init_lock); + + return scnprintf(buf, PAGE_SIZE, "%d\n", val); +} + static ssize_t writeback_limit_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { @@ -341,9 +374,9 @@ static ssize_t writeback_limit_store(struct device *dev, return ret; down_read(&zram->init_lock); - atomic64_set(&zram->stats.bd_wb_limit, val); - if (val == 0) - zram->stop_writeback = false; + spin_lock(&zram->wb_limit_lock); + zram->bd_wb_limit = val; + spin_unlock(&zram->wb_limit_lock); up_read(&zram->init_lock); ret = len; @@ -357,7 +390,9 @@ static ssize_t writeback_limit_show(struct device *dev, struct zram *zram = dev_to_zram(dev); down_read(&zram->init_lock); - val = atomic64_read(&zram->stats.bd_wb_limit); + spin_lock(&zram->wb_limit_lock); + val = zram->bd_wb_limit; + spin_unlock(&zram->wb_limit_lock); up_read(&zram->init_lock); return scnprintf(buf, PAGE_SIZE, "%llu\n", val); @@ -588,8 +623,8 @@ static int read_from_bdev_async(struct zram *zram, struct bio_vec *bvec, return 1; } -#define HUGE_WRITEBACK 0x1 -#define IDLE_WRITEBACK 0x2 +#define HUGE_WRITEBACK 1 +#define IDLE_WRITEBACK 2 static ssize_t writeback_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) @@ -602,7 +637,7 @@ static ssize_t writeback_store(struct device *dev, struct page *page; ssize_t ret, sz; char mode_buf[8]; - unsigned long mode = -1UL; + int mode = -1; unsigned long blk_idx = 0; sz = strscpy(mode_buf, buf, sizeof(mode_buf)); @@ -618,7 +653,7 @@ static ssize_t writeback_store(struct device *dev, else if (!strcmp(mode_buf, "huge")) mode = HUGE_WRITEBACK; - if (mode == -1UL) + if (mode == -1) return -EINVAL; down_read(&zram->init_lock); @@ -645,10 +680,13 @@ static ssize_t writeback_store(struct device *dev, bvec.bv_len = PAGE_SIZE; bvec.bv_offset = 0; - if (zram->stop_writeback) { + spin_lock(&zram->wb_limit_lock); + if (zram->wb_limit_enable && !zram->bd_wb_limit) { + spin_unlock(&zram->wb_limit_lock); ret = -EIO; break; } + spin_unlock(&zram->wb_limit_lock); if (!blk_idx) { blk_idx = alloc_block_bdev(zram); @@ -667,10 +705,11 @@ static ssize_t writeback_store(struct device *dev, zram_test_flag(zram, index, ZRAM_UNDER_WB)) goto next; - if ((mode & IDLE_WRITEBACK && - !zram_test_flag(zram, index, ZRAM_IDLE)) && - (mode & HUGE_WRITEBACK && - !zram_test_flag(zram, index, ZRAM_HUGE))) + if (mode == IDLE_WRITEBACK && + !zram_test_flag(zram, index, ZRAM_IDLE)) + goto next; + if (mode == HUGE_WRITEBACK && + !zram_test_flag(zram, index, ZRAM_HUGE)) goto next; /* * Clearing ZRAM_UNDER_WB is duty of caller. @@ -732,11 +771,10 @@ static ssize_t writeback_store(struct device *dev, zram_set_element(zram, index, blk_idx); blk_idx = 0; atomic64_inc(&zram->stats.pages_stored); - if (atomic64_add_unless(&zram->stats.bd_wb_limit, - -1 << (PAGE_SHIFT - 12), 0)) { - if (atomic64_read(&zram->stats.bd_wb_limit) == 0) - zram->stop_writeback = true; - } + spin_lock(&zram->wb_limit_lock); + if (zram->wb_limit_enable && zram->bd_wb_limit > 0) + zram->bd_wb_limit -= 1UL << (PAGE_SHIFT - 12); + spin_unlock(&zram->wb_limit_lock); next: zram_slot_unlock(zram, index); } @@ -1812,6 +1850,7 @@ static DEVICE_ATTR_RW(comp_algorithm); static DEVICE_ATTR_RW(backing_dev); static DEVICE_ATTR_WO(writeback); static DEVICE_ATTR_RW(writeback_limit); +static DEVICE_ATTR_RW(writeback_limit_enable); #endif static struct attribute *zram_disk_attrs[] = { @@ -1828,6 +1867,7 @@ static struct attribute *zram_disk_attrs[] = { &dev_attr_backing_dev.attr, &dev_attr_writeback.attr, &dev_attr_writeback_limit.attr, + &dev_attr_writeback_limit_enable.attr, #endif &dev_attr_io_stat.attr, &dev_attr_mm_stat.attr, @@ -1867,7 +1907,9 @@ static int zram_add(void) device_id = ret; init_rwsem(&zram->init_lock); - +#ifdef CONFIG_ZRAM_WRITEBACK + spin_lock_init(&zram->wb_limit_lock); +#endif queue = blk_alloc_queue(GFP_KERNEL); if (!queue) { pr_err("Error allocating disk queue for device %d\n", diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h index 4bd3afd15e83..f2fd46daa760 100644 --- a/drivers/block/zram/zram_drv.h +++ b/drivers/block/zram/zram_drv.h @@ -86,7 +86,6 @@ struct zram_stats { atomic64_t bd_count; /* no. of pages in backing device */ atomic64_t bd_reads; /* no. of reads from backing device */ atomic64_t bd_writes; /* no. of writes from backing device */ - atomic64_t bd_wb_limit; /* writeback limit of backing device */ #endif }; @@ -114,8 +113,10 @@ struct zram { */ bool claim; /* Protected by bdev->bd_mutex */ struct file *backing_dev; - bool stop_writeback; #ifdef CONFIG_ZRAM_WRITEBACK + spinlock_t wb_limit_lock; + bool wb_limit_enable; + u64 bd_wb_limit; struct block_device *bdev; unsigned int old_block_size; unsigned long *bitmap; From ba4a45746c362b665e245c50b870615f02f34781 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Tue, 8 Jan 2019 15:22:57 -0800 Subject: [PATCH 126/246] fork, memcg: fix cached_stacks case Commit 5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on memcg charge fail") fixes a crash caused due to failed memcg charge of the kernel stack. However the fix misses the cached_stacks case which this patch fixes. So, the same crash can happen if the memcg charge of a cached stack is failed. Link: http://lkml.kernel.org/r/20190102180145.57406-1-shakeelb@google.com Fixes: 5eed6f1dff87 ("fork,memcg: fix crash in free_thread_stack on memcg charge fail") Signed-off-by: Shakeel Butt Acked-by: Michal Hocko Acked-by: Rik van Riel Cc: Rik van Riel Cc: Roman Gushchin Cc: Johannes Weiner Cc: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/fork.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/fork.c b/kernel/fork.c index a60459947f18..5ad60d47f7e7 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -217,6 +217,7 @@ static unsigned long *alloc_thread_stack_node(struct task_struct *tsk, int node) memset(s->addr, 0, THREAD_SIZE); tsk->stack_vm_area = s; + tsk->stack = s->addr; return s->addr; } From 09c2e76ed734a1d36470d257a778aaba28e86531 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 8 Jan 2019 15:23:00 -0800 Subject: [PATCH 127/246] slab: alien caches must not be initialized if the allocation of the alien cache failed Callers of __alloc_alien() check for NULL. We must do the same check in __alloc_alien_cache to avoid NULL pointer dereferences on allocation failures. Link: http://lkml.kernel.org/r/010001680f42f192-82b4e12e-1565-4ee0-ae1f-1e98974906aa-000000@email.amazonses.com Fixes: 49dfc304ba241 ("slab: use the lock on alien_cache, instead of the lock on array_cache") Fixes: c8522a3a5832b ("Slab: introduce alloc_alien") Signed-off-by: Christoph Lameter Reported-by: syzbot+d6ed4ec679652b4fd4e4@syzkaller.appspotmail.com Reviewed-by: Andrew Morton Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index 73fe23e649c9..78eb8c5bf4e4 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -666,8 +666,10 @@ static struct alien_cache *__alloc_alien_cache(int node, int entries, struct alien_cache *alc = NULL; alc = kmalloc_node(memsize, gfp, node); - init_arraycache(&alc->ac, entries, batch); - spin_lock_init(&alc->lock); + if (alc) { + init_arraycache(&alc->ac, entries, batch); + spin_lock_init(&alc->lock); + } return alc; } From 7bff3c06997374fb9b9991536a547b840549a813 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Tue, 8 Jan 2019 15:23:04 -0800 Subject: [PATCH 128/246] mm/usercopy.c: no check page span for stack objects It is easy to trigger this with CONFIG_HARDENED_USERCOPY_PAGESPAN=y, usercopy: Kernel memory overwrite attempt detected to spans multiple pages (offset 0, size 23)! kernel BUG at mm/usercopy.c:102! For example, print_worker_info char name[WQ_NAME_LEN] = { }; char desc[WORKER_DESC_LEN] = { }; probe_kernel_read(name, wq->name, sizeof(name) - 1); probe_kernel_read(desc, worker->desc, sizeof(desc) - 1); __copy_from_user_inatomic check_object_size check_heap_object check_page_span This is because on-stack variables could cross PAGE_SIZE boundary, and failed this check, if (likely(((unsigned long)ptr & (unsigned long)PAGE_MASK) == ((unsigned long)end & (unsigned long)PAGE_MASK))) ptr = FFFF889007D7EFF8 end = FFFF889007D7F00E Hence, fix it by checking if it is a stack object first. [keescook@chromium.org: improve comments after reorder] Link: http://lkml.kernel.org/r/20190103165151.GA32845@beast Link: http://lkml.kernel.org/r/20181231030254.99441-1-cai@lca.pw Signed-off-by: Qian Cai Signed-off-by: Kees Cook Acked-by: Kees Cook Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/usercopy.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/mm/usercopy.c b/mm/usercopy.c index 852eb4e53f06..14faadcedd06 100644 --- a/mm/usercopy.c +++ b/mm/usercopy.c @@ -247,7 +247,8 @@ static DEFINE_STATIC_KEY_FALSE_RO(bypass_usercopy_checks); /* * Validates that the given object is: * - not bogus address - * - known-safe heap or stack object + * - fully contained by stack (or stack frame, when available) + * - fully within SLAB object (or object whitelist area, when available) * - not in kernel text */ void __check_object_size(const void *ptr, unsigned long n, bool to_user) @@ -262,9 +263,6 @@ void __check_object_size(const void *ptr, unsigned long n, bool to_user) /* Check for invalid addresses. */ check_bogus_address((const unsigned long)ptr, n, to_user); - /* Check for bad heap object. */ - check_heap_object(ptr, n, to_user); - /* Check for bad stack object. */ switch (check_stack_object(ptr, n)) { case NOT_STACK: @@ -282,6 +280,9 @@ void __check_object_size(const void *ptr, unsigned long n, bool to_user) usercopy_abort("process stack", NULL, to_user, 0, n); } + /* Check for bad heap object. */ + check_heap_object(ptr, n, to_user); + /* Check for object in kernel to avoid text exposure. */ check_kernel_text_object((const unsigned long)ptr, n, to_user); } From 63f3655f950186752236bb88a22f8252c11ce394 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Tue, 8 Jan 2019 15:23:07 -0800 Subject: [PATCH 129/246] mm, memcg: fix reclaim deadlock with writeback Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the ext4 writeback task1: wait_on_page_bit+0x82/0xa0 shrink_page_list+0x907/0x960 shrink_inactive_list+0x2c7/0x680 shrink_node_memcg+0x404/0x830 shrink_node+0xd8/0x300 do_try_to_free_pages+0x10d/0x330 try_to_free_mem_cgroup_pages+0xd5/0x1b0 try_charge+0x14d/0x720 memcg_kmem_charge_memcg+0x3c/0xa0 memcg_kmem_charge+0x7e/0xd0 __alloc_pages_nodemask+0x178/0x260 alloc_pages_current+0x95/0x140 pte_alloc_one+0x17/0x40 __pte_alloc+0x1e/0x110 alloc_set_pte+0x5fe/0xc20 do_fault+0x103/0x970 handle_mm_fault+0x61e/0xd10 __do_page_fault+0x252/0x4d0 do_page_fault+0x30/0x80 page_fault+0x28/0x30 task2: __lock_page+0x86/0xa0 mpage_prepare_extent_to_map+0x2e7/0x310 [ext4] ext4_writepages+0x479/0xd60 do_writepages+0x1e/0x30 __writeback_single_inode+0x45/0x320 writeback_sb_inodes+0x272/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x268/0x300 wb_workfn+0xb4/0x390 process_one_work+0x189/0x420 worker_thread+0x4e/0x4b0 kthread+0xe6/0x100 ret_from_fork+0x41/0x50 He adds "task1 is waiting for the PageWriteback bit of the page that task2 has collected in mpd->io_submit->io_bio, and tasks2 is waiting for the LOCKED bit the page which tasks1 has locked" More precisely task1 is handling a page fault and it has a page locked while it charges a new page table to a memcg. That in turn hits a memory limit reclaim and the memcg reclaim for legacy controller is waiting on the writeback but that is never going to finish because the writeback itself is waiting for the page locked in the #PF path. So this is essentially ABBA deadlock: lock_page(A) SetPageWriteback(A) unlock_page(A) lock_page(B) lock_page(B) pte_alloc_pne shrink_page_list wait_on_page_writeback(A) SetPageWriteback(B) unlock_page(B) # flush A, B to clear the writeback This accumulating of more pages to flush is used by several filesystems to generate a more optimal IO patterns. Waiting for the writeback in legacy memcg controller is a workaround for pre-mature OOM killer invocations because there is no dirty IO throttling available for the controller. There is no easy way around that unfortunately. Therefore fix this specific issue by pre-allocating the page table outside of the page lock. We have that handy infrastructure for that already so simply reuse the fault-around pattern which already does this. There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations from under a fs page locked but they should be really rare. I am not aware of a better solution unfortunately. [akpm@linux-foundation.org: fix mm/memory.c:__do_fault()] [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: enhance comment, per Johannes] Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages") Signed-off-by: Michal Hocko Reported-by: Liu Bo Debugged-by: Liu Bo Acked-by: Kirill A. Shutemov Acked-by: Johannes Weiner Reviewed-by: Liu Bo Cc: Jan Kara Cc: Dave Chinner Cc: Theodore Ts'o Cc: Vladimir Davydov Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/mm/memory.c b/mm/memory.c index a52663c0612d..5e46836714dc 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2994,6 +2994,28 @@ static vm_fault_t __do_fault(struct vm_fault *vmf) struct vm_area_struct *vma = vmf->vma; vm_fault_t ret; + /* + * Preallocate pte before we take page_lock because this might lead to + * deadlocks for memcg reclaim which waits for pages under writeback: + * lock_page(A) + * SetPageWriteback(A) + * unlock_page(A) + * lock_page(B) + * lock_page(B) + * pte_alloc_pne + * shrink_page_list + * wait_on_page_writeback(A) + * SetPageWriteback(B) + * unlock_page(B) + * # flush A, B to clear the writeback + */ + if (pmd_none(*vmf->pmd) && !vmf->prealloc_pte) { + vmf->prealloc_pte = pte_alloc_one(vmf->vma->vm_mm); + if (!vmf->prealloc_pte) + return VM_FAULT_OOM; + smp_wmb(); /* See comment in __pte_alloc() */ + } + ret = vma->vm_ops->fault(vmf); if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE | VM_FAULT_RETRY | VM_FAULT_DONE_COW))) From eb214f2dda31ffa989033b1e0f848ba0d3cb6188 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Tue, 8 Jan 2019 15:23:11 -0800 Subject: [PATCH 130/246] kasan, arm64: use ARCH_SLAB_MINALIGN instead of manual aligning Instead of changing cache->align to be aligned to KASAN_SHADOW_SCALE_SIZE in kasan_cache_create() we can reuse the ARCH_SLAB_MINALIGN macro. Link: http://lkml.kernel.org/r/52ddd881916bcc153a9924c154daacde78522227.1546540962.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Suggested-by: Vincenzo Frascino Cc: Andrey Ryabinin Cc: Christoph Lameter Cc: Dmitry Vyukov Cc: Mark Rutland Cc: Vincenzo Frascino Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm64/include/asm/cache.h | 6 ++++++ mm/kasan/common.c | 2 -- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 13dd42c3ad4e..eb43e09c1980 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -58,6 +58,12 @@ */ #define ARCH_DMA_MINALIGN (128) +#ifdef CONFIG_KASAN_SW_TAGS +#define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT) +#else +#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long) +#endif + #ifndef __ASSEMBLY__ #include diff --git a/mm/kasan/common.c b/mm/kasan/common.c index 03d5d1374ca7..44390392d4c9 100644 --- a/mm/kasan/common.c +++ b/mm/kasan/common.c @@ -298,8 +298,6 @@ void kasan_cache_create(struct kmem_cache *cache, unsigned int *size, return; } - cache->align = round_up(cache->align, KASAN_SHADOW_SCALE_SIZE); - *flags |= SLAB_KASAN; } From 96fedce27e1356a2fff1c270710d9405848db562 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Tue, 8 Jan 2019 15:23:15 -0800 Subject: [PATCH 131/246] kasan: make tag based mode work with CONFIG_HARDENED_USERCOPY With CONFIG_HARDENED_USERCOPY enabled __check_heap_object() compares and then subtracts a potentially tagged pointer with a non-tagged address of the page that this pointer belongs to, which leads to unexpected behavior. Untag the pointer in __check_heap_object() before doing any of these operations. Link: http://lkml.kernel.org/r/7e756a298d514c4482f52aea6151db34818d395d.1546540962.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Cc: Andrey Ryabinin Cc: Christoph Lameter Cc: Dmitry Vyukov Cc: Mark Rutland Cc: Vincenzo Frascino Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slub.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/slub.c b/mm/slub.c index 36c0befeebd8..1e3d0ec4e200 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -3846,6 +3846,8 @@ void __check_heap_object(const void *ptr, unsigned long n, struct page *page, unsigned int offset; size_t object_size; + ptr = kasan_reset_tag(ptr); + /* Find object and usable object size. */ s = page->slab_cache; From a3fe7cdf02e318870fb71218726cc2321ff41f30 Mon Sep 17 00:00:00 2001 From: Andrey Konovalov Date: Tue, 8 Jan 2019 15:23:18 -0800 Subject: [PATCH 132/246] kasan: fix krealloc handling for tag-based mode Right now tag-based KASAN can retag the memory that is reallocated via krealloc and return a differently tagged pointer even if the same slab object gets used and no reallocated technically happens. There are a few issues with this approach. One is that krealloc callers can't rely on comparing the return value with the passed argument to check whether reallocation happened. Another is that if a caller knows that no reallocation happened, that it can access object memory through the old pointer, which leads to false positives. Look at nf_ct_ext_add() to see an example. Fix this by keeping the same tag if the memory don't actually gets reallocated during krealloc. Link: http://lkml.kernel.org/r/bb2a71d17ed072bcc528cbee46fcbd71a6da3be4.1546540962.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Cc: Andrey Ryabinin Cc: Christoph Lameter Cc: Dmitry Vyukov Cc: Mark Rutland Cc: Vincenzo Frascino Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/kasan/common.c | 65 ++++++++++++++++++++++++++++++++--------------- 1 file changed, 44 insertions(+), 21 deletions(-) diff --git a/mm/kasan/common.c b/mm/kasan/common.c index 44390392d4c9..73c9cbfdedf4 100644 --- a/mm/kasan/common.c +++ b/mm/kasan/common.c @@ -347,28 +347,43 @@ void kasan_poison_object_data(struct kmem_cache *cache, void *object) } /* - * Since it's desirable to only call object contructors once during slab - * allocation, we preassign tags to all such objects. Also preassign tags for - * SLAB_TYPESAFE_BY_RCU slabs to avoid use-after-free reports. - * For SLAB allocator we can't preassign tags randomly since the freelist is - * stored as an array of indexes instead of a linked list. Assign tags based - * on objects indexes, so that objects that are next to each other get - * different tags. - * After a tag is assigned, the object always gets allocated with the same tag. - * The reason is that we can't change tags for objects with constructors on - * reallocation (even for non-SLAB_TYPESAFE_BY_RCU), because the constructor - * code can save the pointer to the object somewhere (e.g. in the object - * itself). Then if we retag it, the old saved pointer will become invalid. + * This function assigns a tag to an object considering the following: + * 1. A cache might have a constructor, which might save a pointer to a slab + * object somewhere (e.g. in the object itself). We preassign a tag for + * each object in caches with constructors during slab creation and reuse + * the same tag each time a particular object is allocated. + * 2. A cache might be SLAB_TYPESAFE_BY_RCU, which means objects can be + * accessed after being freed. We preassign tags for objects in these + * caches as well. + * 3. For SLAB allocator we can't preassign tags randomly since the freelist + * is stored as an array of indexes instead of a linked list. Assign tags + * based on objects indexes, so that objects that are next to each other + * get different tags. */ -static u8 assign_tag(struct kmem_cache *cache, const void *object, bool new) +static u8 assign_tag(struct kmem_cache *cache, const void *object, + bool init, bool krealloc) { - if (!cache->ctor && !(cache->flags & SLAB_TYPESAFE_BY_RCU)) - return new ? KASAN_TAG_KERNEL : random_tag(); + /* Reuse the same tag for krealloc'ed objects. */ + if (krealloc) + return get_tag(object); + /* + * If the cache neither has a constructor nor has SLAB_TYPESAFE_BY_RCU + * set, assign a tag when the object is being allocated (init == false). + */ + if (!cache->ctor && !(cache->flags & SLAB_TYPESAFE_BY_RCU)) + return init ? KASAN_TAG_KERNEL : random_tag(); + + /* For caches that either have a constructor or SLAB_TYPESAFE_BY_RCU: */ #ifdef CONFIG_SLAB + /* For SLAB assign tags based on the object index in the freelist. */ return (u8)obj_to_index(cache, virt_to_page(object), (void *)object); #else - return new ? random_tag() : get_tag(object); + /* + * For SLUB assign a random tag during slab creation, otherwise reuse + * the already assigned tag. + */ + return init ? random_tag() : get_tag(object); #endif } @@ -384,7 +399,8 @@ void * __must_check kasan_init_slab_obj(struct kmem_cache *cache, __memset(alloc_info, 0, sizeof(*alloc_info)); if (IS_ENABLED(CONFIG_KASAN_SW_TAGS)) - object = set_tag(object, assign_tag(cache, object, true)); + object = set_tag(object, + assign_tag(cache, object, true, false)); return (void *)object; } @@ -450,8 +466,8 @@ bool kasan_slab_free(struct kmem_cache *cache, void *object, unsigned long ip) return __kasan_slab_free(cache, object, ip, true); } -void * __must_check kasan_kmalloc(struct kmem_cache *cache, const void *object, - size_t size, gfp_t flags) +static void *__kasan_kmalloc(struct kmem_cache *cache, const void *object, + size_t size, gfp_t flags, bool krealloc) { unsigned long redzone_start; unsigned long redzone_end; @@ -469,7 +485,7 @@ void * __must_check kasan_kmalloc(struct kmem_cache *cache, const void *object, KASAN_SHADOW_SCALE_SIZE); if (IS_ENABLED(CONFIG_KASAN_SW_TAGS)) - tag = assign_tag(cache, object, false); + tag = assign_tag(cache, object, false, krealloc); /* Tag is ignored in set_tag without CONFIG_KASAN_SW_TAGS */ kasan_unpoison_shadow(set_tag(object, tag), size); @@ -481,6 +497,12 @@ void * __must_check kasan_kmalloc(struct kmem_cache *cache, const void *object, return set_tag(object, tag); } + +void * __must_check kasan_kmalloc(struct kmem_cache *cache, const void *object, + size_t size, gfp_t flags) +{ + return __kasan_kmalloc(cache, object, size, flags, false); +} EXPORT_SYMBOL(kasan_kmalloc); void * __must_check kasan_kmalloc_large(const void *ptr, size_t size, @@ -520,7 +542,8 @@ void * __must_check kasan_krealloc(const void *object, size_t size, gfp_t flags) if (unlikely(!PageSlab(page))) return kasan_kmalloc_large(object, size, flags); else - return kasan_kmalloc(page->slab_cache, object, size, flags); + return __kasan_kmalloc(page->slab_cache, object, size, + flags, true); } void kasan_poison_kfree(void *ptr, unsigned long ip) From aff876dcf4461f311adbdf39ce48c134b3f99c49 Mon Sep 17 00:00:00 2001 From: Miles Chen Date: Tue, 8 Jan 2019 15:23:22 -0800 Subject: [PATCH 133/246] tools/vm/page_owner: use page_owner_sort in the use example The example in comment does not useable because the output binary is named "page_owner_sort", not "sort". Also add a reference to Documentation/vm/page_owner.rst Link: http://lkml.kernel.org/r/1546515361-8317-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen Reviewed-by: Andrew Morton Cc: Joonsoo Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/vm/page_owner_sort.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/vm/page_owner_sort.c b/tools/vm/page_owner_sort.c index 18fc112b65cd..d3a8755c039c 100644 --- a/tools/vm/page_owner_sort.c +++ b/tools/vm/page_owner_sort.c @@ -5,7 +5,9 @@ * Example use: * cat /sys/kernel/debug/page_owner > page_owner_full.txt * grep -v ^PFN page_owner_full.txt > page_owner.txt - * ./sort page_owner.txt sorted_page_owner.txt + * ./page_owner_sort page_owner.txt sorted_page_owner.txt + * + * See Documentation/vm/page_owner.rst */ #include From 1ed7293ac40c5b1950b8ab21b6bc1838578ae2ad Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Tue, 8 Jan 2019 15:23:25 -0800 Subject: [PATCH 134/246] mm/memory.c: initialise mmu_notifier_range correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the paths in follow_pte_pmd() initialised the mmu_notifier_range incorrectly. Link: http://lkml.kernel.org/r/20190103002126.GM6310@bombadil.infradead.org Fixes: ac46d4f3c432 ("mm/mmu_notifier: use structure for invalidate_range_start/end calls v2") Signed-off-by: Matthew Wilcox Tested-by: Dave Chinner Reviewed-by: Jérôme Glisse Cc: John Hubbard Cc: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 5e46836714dc..e11ca9dd823f 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -4099,8 +4099,8 @@ static int __follow_pte_pmd(struct mm_struct *mm, unsigned long address, goto out; if (range) { - range->start = address & PAGE_MASK; - range->end = range->start + PAGE_SIZE; + mmu_notifier_range_init(range, mm, address & PAGE_MASK, + (address & PAGE_MASK) + PAGE_SIZE); mmu_notifier_invalidate_range_start(range); } ptep = pte_offset_map_lock(mm, pmd, address, ptlp); From 8ab88c7169b7fba98812ead6524b9d05bc76cf00 Mon Sep 17 00:00:00 2001 From: Jan Stancek Date: Tue, 8 Jan 2019 15:23:28 -0800 Subject: [PATCH 135/246] mm: page_mapped: don't assume compound page is huge or THP LTP proc01 testcase has been observed to rarely trigger crashes on arm64: page_mapped+0x78/0xb4 stable_page_flags+0x27c/0x338 kpageflags_read+0xfc/0x164 proc_reg_read+0x7c/0xb8 __vfs_read+0x58/0x178 vfs_read+0x90/0x14c SyS_read+0x60/0xc0 The issue is that page_mapped() assumes that if compound page is not huge, then it must be THP. But if this is 'normal' compound page (COMPOUND_PAGE_DTOR), then following loop can keep running (for HPAGE_PMD_NR iterations) until it tries to read from memory that isn't mapped and triggers a panic: for (i = 0; i < hpage_nr_pages(page); i++) { if (atomic_read(&page[i]._mapcount) >= 0) return true; } I could replicate this on x86 (v4.20-rc4-98-g60b548237fed) only with a custom kernel module [1] which: - allocates compound page (PAGEC) of order 1 - allocates 2 normal pages (COPY), which are initialized to 0xff (to satisfy _mapcount >= 0) - 2 PAGEC page structs are copied to address of first COPY page - second page of COPY is marked as not present - call to page_mapped(COPY) now triggers fault on access to 2nd COPY page at offset 0x30 (_mapcount) [1] https://github.com/jstancek/reproducers/blob/master/kernel/page_mapped_crash/repro.c Fix the loop to iterate for "1 << compound_order" pages. Kirrill said "IIRC, sound subsystem can producuce custom mapped compound pages". Link: http://lkml.kernel.org/r/c440d69879e34209feba21e12d236d06bc0a25db.1543577156.git.jstancek@redhat.com Fixes: e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") Signed-off-by: Jan Stancek Debugged-by: Laszlo Ersek Suggested-by: "Kirill A. Shutemov" Acked-by: Michal Hocko Acked-by: Kirill A. Shutemov Reviewed-by: David Hildenbrand Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/util.c b/mm/util.c index 4df23d64aac7..1ea055138043 100644 --- a/mm/util.c +++ b/mm/util.c @@ -478,7 +478,7 @@ bool page_mapped(struct page *page) return true; if (PageHuge(page)) return false; - for (i = 0; i < hpage_nr_pages(page); i++) { + for (i = 0; i < (1 << compound_order(page)); i++) { if (atomic_read(&page[i]._mapcount) >= 0) return true; } From e7c58097793ef15d58fadf190ee58738fbf447cd Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Tue, 8 Jan 2019 15:23:32 -0800 Subject: [PATCH 136/246] hugetlbfs: revert "Use i_mmap_rwsem to fix page fault/truncate race" This reverts c86aa7bbfd5568ba8a82d3635d8f7b8a8e06fe54 The reverted commit caused ABBA deadlocks when file migration raced with file eviction for specific hugetlbfs files. This was discovered with a modified version of the LTP move_pages12 test. The purpose of the reverted patch was to close a long existing race between hugetlbfs file truncation and page faults. After more analysis of the patch and impacted code, it was determined that i_mmap_rwsem can not be used for all required synchronization. Therefore, revert this patch while working an another approach to the underlying issue. Link: http://lkml.kernel.org/r/20190103235452.29335-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Jan Stancek Cc: Michal Hocko Cc: Hugh Dickins Cc: Naoya Horiguchi Cc: "Aneesh Kumar K . V" Cc: Andrea Arcangeli Cc: "Kirill A . Shutemov" Cc: Davidlohr Bueso Cc: Prakash Sangappa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hugetlbfs/inode.c | 61 ++++++++++++++++++++++++-------------------- mm/hugetlb.c | 21 +++++++-------- 2 files changed, 44 insertions(+), 38 deletions(-) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index a2fcea5f8225..32920a10100e 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -383,16 +383,17 @@ hugetlb_vmdelete_list(struct rb_root_cached *root, pgoff_t start, pgoff_t end) * truncation is indicated by end of range being LLONG_MAX * In this case, we first scan the range and release found pages. * After releasing pages, hugetlb_unreserve_pages cleans up region/reserv - * maps and global counts. + * maps and global counts. Page faults can not race with truncation + * in this routine. hugetlb_no_page() prevents page faults in the + * truncated range. It checks i_size before allocation, and again after + * with the page table lock for the page held. The same lock must be + * acquired to unmap a page. * hole punch is indicated if end is not LLONG_MAX * In the hole punch case we scan the range and release found pages. * Only when releasing a page is the associated region/reserv map * deleted. The region/reserv map for ranges without associated - * pages are not modified. - * - * Callers of this routine must hold the i_mmap_rwsem in write mode to prevent - * races with page faults. - * + * pages are not modified. Page faults can race with hole punch. + * This is indicated if we find a mapped page. * Note: If the passed end of range value is beyond the end of file, but * not LLONG_MAX this routine still performs a hole punch operation. */ @@ -422,14 +423,32 @@ static void remove_inode_hugepages(struct inode *inode, loff_t lstart, for (i = 0; i < pagevec_count(&pvec); ++i) { struct page *page = pvec.pages[i]; + u32 hash; index = page->index; + hash = hugetlb_fault_mutex_hash(h, current->mm, + &pseudo_vma, + mapping, index, 0); + mutex_lock(&hugetlb_fault_mutex_table[hash]); + /* - * A mapped page is impossible as callers should unmap - * all references before calling. And, i_mmap_rwsem - * prevents the creation of additional mappings. + * If page is mapped, it was faulted in after being + * unmapped in caller. Unmap (again) now after taking + * the fault mutex. The mutex will prevent faults + * until we finish removing the page. + * + * This race can only happen in the hole punch case. + * Getting here in a truncate operation is a bug. */ - VM_BUG_ON(page_mapped(page)); + if (unlikely(page_mapped(page))) { + BUG_ON(truncate_op); + + i_mmap_lock_write(mapping); + hugetlb_vmdelete_list(&mapping->i_mmap, + index * pages_per_huge_page(h), + (index + 1) * pages_per_huge_page(h)); + i_mmap_unlock_write(mapping); + } lock_page(page); /* @@ -451,6 +470,7 @@ static void remove_inode_hugepages(struct inode *inode, loff_t lstart, } unlock_page(page); + mutex_unlock(&hugetlb_fault_mutex_table[hash]); } huge_pagevec_release(&pvec); cond_resched(); @@ -462,20 +482,9 @@ static void remove_inode_hugepages(struct inode *inode, loff_t lstart, static void hugetlbfs_evict_inode(struct inode *inode) { - struct address_space *mapping = inode->i_mapping; struct resv_map *resv_map; - /* - * The vfs layer guarantees that there are no other users of this - * inode. Therefore, it would be safe to call remove_inode_hugepages - * without holding i_mmap_rwsem. We acquire and hold here to be - * consistent with other callers. Since there will be no contention - * on the semaphore, overhead is negligible. - */ - i_mmap_lock_write(mapping); remove_inode_hugepages(inode, 0, LLONG_MAX); - i_mmap_unlock_write(mapping); - resv_map = (struct resv_map *)inode->i_mapping->private_data; /* root inode doesn't have the resv_map, so we should check it */ if (resv_map) @@ -496,8 +505,8 @@ static int hugetlb_vmtruncate(struct inode *inode, loff_t offset) i_mmap_lock_write(mapping); if (!RB_EMPTY_ROOT(&mapping->i_mmap.rb_root)) hugetlb_vmdelete_list(&mapping->i_mmap, pgoff, 0); - remove_inode_hugepages(inode, offset, LLONG_MAX); i_mmap_unlock_write(mapping); + remove_inode_hugepages(inode, offset, LLONG_MAX); return 0; } @@ -531,8 +540,8 @@ static long hugetlbfs_punch_hole(struct inode *inode, loff_t offset, loff_t len) hugetlb_vmdelete_list(&mapping->i_mmap, hole_start >> PAGE_SHIFT, hole_end >> PAGE_SHIFT); - remove_inode_hugepages(inode, hole_start, hole_end); i_mmap_unlock_write(mapping); + remove_inode_hugepages(inode, hole_start, hole_end); inode_unlock(inode); } @@ -615,11 +624,7 @@ static long hugetlbfs_fallocate(struct file *file, int mode, loff_t offset, /* addr is the offset within the file (zero based) */ addr = index * hpage_size; - /* - * fault mutex taken here, protects against fault path - * and hole punch. inode_lock previously taken protects - * against truncation. - */ + /* mutex taken here, fault path and hole punch */ hash = hugetlb_fault_mutex_hash(h, mm, &pseudo_vma, mapping, index, addr); mutex_lock(&hugetlb_fault_mutex_table[hash]); diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 745088810965..aedc1b183cf9 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3755,16 +3755,16 @@ static vm_fault_t hugetlb_no_page(struct mm_struct *mm, } /* - * We can not race with truncation due to holding i_mmap_rwsem. - * Check once here for faults beyond end of file. + * Use page lock to guard against racing truncation + * before we get page_table_lock. */ - size = i_size_read(mapping->host) >> huge_page_shift(h); - if (idx >= size) - goto out; - retry: page = find_lock_page(mapping, idx); if (!page) { + size = i_size_read(mapping->host) >> huge_page_shift(h); + if (idx >= size) + goto out; + /* * Check for page in userfault range */ @@ -3854,6 +3854,9 @@ retry: } ptl = huge_pte_lock(h, mm, ptep); + size = i_size_read(mapping->host) >> huge_page_shift(h); + if (idx >= size) + goto backout; ret = 0; if (!huge_pte_none(huge_ptep_get(ptep))) @@ -3956,10 +3959,8 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, /* * Acquire i_mmap_rwsem before calling huge_pte_alloc and hold - * until finished with ptep. This serves two purposes: - * 1) It prevents huge_pmd_unshare from being called elsewhere - * and making the ptep no longer valid. - * 2) It synchronizes us with file truncation. + * until finished with ptep. This prevents huge_pmd_unshare from + * being called elsewhere and making the ptep no longer valid. * * ptep could have already be assigned via huge_pte_offset. That * is OK, as huge_pte_alloc will return the same value unless From ddeaab32a89f04b7e2a2df8771583a719c4ac6b7 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Tue, 8 Jan 2019 15:23:36 -0800 Subject: [PATCH 137/246] hugetlbfs: revert "use i_mmap_rwsem for more pmd sharing synchronization" This reverts b43a9990055958e70347c56f90ea2ae32c67334c The reverted commit caused issues with migration and poisoning of anon huge pages. The LTP move_pages12 test will cause an "unable to handle kernel NULL pointer" BUG would occur with stack similar to: RIP: 0010:down_write+0x1b/0x40 Call Trace: migrate_pages+0x81f/0xb90 __ia32_compat_sys_migrate_pages+0x190/0x190 do_move_pages_to_node.isra.53.part.54+0x2a/0x50 kernel_move_pages+0x566/0x7b0 __x64_sys_move_pages+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The purpose of the reverted patch was to fix some long existing races with huge pmd sharing. It used i_mmap_rwsem for this purpose with the idea that this could also be used to address truncate/page fault races with another patch. Further analysis has determined that i_mmap_rwsem can not be used to address all these hugetlbfs synchronization issues. Therefore, revert this patch while working an another approach to the underlying issues. Link: http://lkml.kernel.org/r/20190103235452.29335-2-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Jan Stancek Cc: Michal Hocko Cc: Hugh Dickins Cc: Naoya Horiguchi Cc: "Aneesh Kumar K . V" Cc: Andrea Arcangeli Cc: "Kirill A . Shutemov" Cc: Davidlohr Bueso Cc: Prakash Sangappa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 64 +++++++++++---------------------------------- mm/memory-failure.c | 16 ++---------- mm/migrate.c | 13 +-------- mm/rmap.c | 4 --- mm/userfaultfd.c | 11 ++------ 5 files changed, 20 insertions(+), 88 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index aedc1b183cf9..df2e7dd5ff17 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3238,7 +3238,6 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, struct page *ptepage; unsigned long addr; int cow; - struct address_space *mapping = vma->vm_file->f_mapping; struct hstate *h = hstate_vma(vma); unsigned long sz = huge_page_size(h); struct mmu_notifier_range range; @@ -3250,23 +3249,13 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, mmu_notifier_range_init(&range, src, vma->vm_start, vma->vm_end); mmu_notifier_invalidate_range_start(&range); - } else { - /* - * For shared mappings i_mmap_rwsem must be held to call - * huge_pte_alloc, otherwise the returned ptep could go - * away if part of a shared pmd and another thread calls - * huge_pmd_unshare. - */ - i_mmap_lock_read(mapping); } for (addr = vma->vm_start; addr < vma->vm_end; addr += sz) { spinlock_t *src_ptl, *dst_ptl; - src_pte = huge_pte_offset(src, addr, sz); if (!src_pte) continue; - dst_pte = huge_pte_alloc(dst, addr, sz); if (!dst_pte) { ret = -ENOMEM; @@ -3337,8 +3326,6 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, if (cow) mmu_notifier_invalidate_range_end(&range); - else - i_mmap_unlock_read(mapping); return ret; } @@ -3784,18 +3771,14 @@ retry: }; /* - * hugetlb_fault_mutex and i_mmap_rwsem must be - * dropped before handling userfault. Reacquire - * after handling fault to make calling code simpler. + * hugetlb_fault_mutex must be dropped before + * handling userfault. Reacquire after handling + * fault to make calling code simpler. */ hash = hugetlb_fault_mutex_hash(h, mm, vma, mapping, idx, haddr); mutex_unlock(&hugetlb_fault_mutex_table[hash]); - i_mmap_unlock_read(mapping); - ret = handle_userfault(&vmf, VM_UFFD_MISSING); - - i_mmap_lock_read(mapping); mutex_lock(&hugetlb_fault_mutex_table[hash]); goto out; } @@ -3943,11 +3926,6 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, ptep = huge_pte_offset(mm, haddr, huge_page_size(h)); if (ptep) { - /* - * Since we hold no locks, ptep could be stale. That is - * OK as we are only making decisions based on content and - * not actually modifying content here. - */ entry = huge_ptep_get(ptep); if (unlikely(is_hugetlb_entry_migration(entry))) { migration_entry_wait_huge(vma, mm, ptep); @@ -3955,31 +3933,20 @@ vm_fault_t hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, } else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) return VM_FAULT_HWPOISON_LARGE | VM_FAULT_SET_HINDEX(hstate_index(h)); + } else { + ptep = huge_pte_alloc(mm, haddr, huge_page_size(h)); + if (!ptep) + return VM_FAULT_OOM; } - /* - * Acquire i_mmap_rwsem before calling huge_pte_alloc and hold - * until finished with ptep. This prevents huge_pmd_unshare from - * being called elsewhere and making the ptep no longer valid. - * - * ptep could have already be assigned via huge_pte_offset. That - * is OK, as huge_pte_alloc will return the same value unless - * something changed. - */ mapping = vma->vm_file->f_mapping; - i_mmap_lock_read(mapping); - ptep = huge_pte_alloc(mm, haddr, huge_page_size(h)); - if (!ptep) { - i_mmap_unlock_read(mapping); - return VM_FAULT_OOM; - } + idx = vma_hugecache_offset(h, vma, haddr); /* * Serialize hugepage allocation and instantiation, so that we don't * get spurious allocation failures if two CPUs race to instantiate * the same page in the page cache. */ - idx = vma_hugecache_offset(h, vma, haddr); hash = hugetlb_fault_mutex_hash(h, mm, vma, mapping, idx, haddr); mutex_lock(&hugetlb_fault_mutex_table[hash]); @@ -4067,7 +4034,6 @@ out_ptl: } out_mutex: mutex_unlock(&hugetlb_fault_mutex_table[hash]); - i_mmap_unlock_read(mapping); /* * Generally it's safe to hold refcount during waiting page lock. But * here we just wait to defer the next page fault to avoid busy loop and @@ -4672,12 +4638,10 @@ void adjust_range_if_pmd_sharing_possible(struct vm_area_struct *vma, * Search for a shareable pmd page for hugetlb. In any case calls pmd_alloc() * and returns the corresponding pte. While this is not necessary for the * !shared pmd case because we can allocate the pmd later as well, it makes the - * code much cleaner. - * - * This routine must be called with i_mmap_rwsem held in at least read mode. - * For hugetlbfs, this prevents removal of any page table entries associated - * with the address space. This is important as we are setting up sharing - * based on existing page table entries (mappings). + * code much cleaner. pmd allocation is essential for the shared case because + * pud has to be populated inside the same i_mmap_rwsem section - otherwise + * racing tasks could either miss the sharing (see huge_pte_offset) or select a + * bad pmd for sharing. */ pte_t *huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) { @@ -4694,6 +4658,7 @@ pte_t *huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) if (!vma_shareable(vma, addr)) return (pte_t *)pmd_alloc(mm, pud, addr); + i_mmap_lock_write(mapping); vma_interval_tree_foreach(svma, &mapping->i_mmap, idx, idx) { if (svma == vma) continue; @@ -4723,6 +4688,7 @@ pte_t *huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) spin_unlock(ptl); out: pte = (pte_t *)pmd_alloc(mm, pud, addr); + i_mmap_unlock_write(mapping); return pte; } @@ -4733,7 +4699,7 @@ out: * indicated by page_count > 1, unmap is achieved by clearing pud and * decrementing the ref count. If count == 1, the pte page is not shared. * - * Called with page table lock held and i_mmap_rwsem held in write mode. + * called with page table lock held. * * returns: 1 successfully unmapped a shared pte page * 0 the underlying pte page is not shared, or it is the last user diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 6379fff1a5ff..7c72f2a95785 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -966,7 +966,7 @@ static bool hwpoison_user_mappings(struct page *p, unsigned long pfn, enum ttu_flags ttu = TTU_IGNORE_MLOCK | TTU_IGNORE_ACCESS; struct address_space *mapping; LIST_HEAD(tokill); - bool unmap_success = true; + bool unmap_success; int kill = 1, forcekill; struct page *hpage = *hpagep; bool mlocked = PageMlocked(hpage); @@ -1028,19 +1028,7 @@ static bool hwpoison_user_mappings(struct page *p, unsigned long pfn, if (kill) collect_procs(hpage, &tokill, flags & MF_ACTION_REQUIRED); - if (!PageHuge(hpage)) { - unmap_success = try_to_unmap(hpage, ttu); - } else if (mapping) { - /* - * For hugetlb pages, try_to_unmap could potentially call - * huge_pmd_unshare. Because of this, take semaphore in - * write mode here and set TTU_RMAP_LOCKED to indicate we - * have taken the lock at this higer level. - */ - i_mmap_lock_write(mapping); - unmap_success = try_to_unmap(hpage, ttu|TTU_RMAP_LOCKED); - i_mmap_unlock_write(mapping); - } + unmap_success = try_to_unmap(hpage, ttu); if (!unmap_success) pr_err("Memory failure: %#lx: failed to unmap page (mapcount=%d)\n", pfn, page_mapcount(hpage)); diff --git a/mm/migrate.c b/mm/migrate.c index ccf8966caf6f..a16b15090df3 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1324,19 +1324,8 @@ static int unmap_and_move_huge_page(new_page_t get_new_page, goto put_anon; if (page_mapped(hpage)) { - struct address_space *mapping = page_mapping(hpage); - - /* - * try_to_unmap could potentially call huge_pmd_unshare. - * Because of this, take semaphore in write mode here and - * set TTU_RMAP_LOCKED to let lower levels know we have - * taken the lock. - */ - i_mmap_lock_write(mapping); try_to_unmap(hpage, - TTU_MIGRATION|TTU_IGNORE_MLOCK|TTU_IGNORE_ACCESS| - TTU_RMAP_LOCKED); - i_mmap_unlock_write(mapping); + TTU_MIGRATION|TTU_IGNORE_MLOCK|TTU_IGNORE_ACCESS); page_was_mapped = 1; } diff --git a/mm/rmap.c b/mm/rmap.c index 21a26cf51114..68a1a5b869a5 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -25,7 +25,6 @@ * page->flags PG_locked (lock_page) * hugetlbfs_i_mmap_rwsem_key (in huge_pmd_share) * mapping->i_mmap_rwsem - * hugetlb_fault_mutex (hugetlbfs specific page fault mutex) * anon_vma->rwsem * mm->page_table_lock or pte_lock * zone_lru_lock (in mark_page_accessed, isolate_lru_page) @@ -1379,9 +1378,6 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma, /* * If sharing is possible, start and end will be adjusted * accordingly. - * - * If called for a huge page, caller must hold i_mmap_rwsem - * in write mode as it is possible to call huge_pmd_unshare. */ adjust_range_if_pmd_sharing_possible(vma, &range.start, &range.end); diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c index 065c1ce191c4..d59b5a73dfb3 100644 --- a/mm/userfaultfd.c +++ b/mm/userfaultfd.c @@ -267,14 +267,10 @@ retry: VM_BUG_ON(dst_addr & ~huge_page_mask(h)); /* - * Serialize via i_mmap_rwsem and hugetlb_fault_mutex. - * i_mmap_rwsem ensures the dst_pte remains valid even - * in the case of shared pmds. fault mutex prevents - * races with other faulting threads. + * Serialize via hugetlb_fault_mutex */ - mapping = dst_vma->vm_file->f_mapping; - i_mmap_lock_read(mapping); idx = linear_page_index(dst_vma, dst_addr); + mapping = dst_vma->vm_file->f_mapping; hash = hugetlb_fault_mutex_hash(h, dst_mm, dst_vma, mapping, idx, dst_addr); mutex_lock(&hugetlb_fault_mutex_table[hash]); @@ -283,7 +279,6 @@ retry: dst_pte = huge_pte_alloc(dst_mm, dst_addr, huge_page_size(h)); if (!dst_pte) { mutex_unlock(&hugetlb_fault_mutex_table[hash]); - i_mmap_unlock_read(mapping); goto out_unlock; } @@ -291,7 +286,6 @@ retry: dst_pteval = huge_ptep_get(dst_pte); if (!huge_pte_none(dst_pteval)) { mutex_unlock(&hugetlb_fault_mutex_table[hash]); - i_mmap_unlock_read(mapping); goto out_unlock; } @@ -299,7 +293,6 @@ retry: dst_addr, src_addr, &page); mutex_unlock(&hugetlb_fault_mutex_table[hash]); - i_mmap_unlock_read(mapping); vm_alloc_shared = vm_shared; cond_resched(); From 73444bc4d8f92e46a20cb6bd3342fc2ea75c6787 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Tue, 8 Jan 2019 15:23:39 -0800 Subject: [PATCH 138/246] mm, page_alloc: do not wake kswapd with zone lock held syzbot reported the following regression in the latest merge window and it was confirmed by Qian Cai that a similar bug was visible from a different context. ====================================================== WARNING: possible circular locking dependency detected 4.20.0+ #297 Not tainted ------------------------------------------------------ syz-executor0/8529 is trying to acquire lock: 000000005e7fb829 (&pgdat->kswapd_wait){....}, at: __wake_up_common_lock+0x19e/0x330 kernel/sched/wait.c:120 but task is already holding lock: 000000009bb7bae0 (&(&zone->lock)->rlock){-.-.}, at: spin_lock include/linux/spinlock.h:329 [inline] 000000009bb7bae0 (&(&zone->lock)->rlock){-.-.}, at: rmqueue_bulk mm/page_alloc.c:2548 [inline] 000000009bb7bae0 (&(&zone->lock)->rlock){-.-.}, at: __rmqueue_pcplist mm/page_alloc.c:3021 [inline] 000000009bb7bae0 (&(&zone->lock)->rlock){-.-.}, at: rmqueue_pcplist mm/page_alloc.c:3050 [inline] 000000009bb7bae0 (&(&zone->lock)->rlock){-.-.}, at: rmqueue mm/page_alloc.c:3072 [inline] 000000009bb7bae0 (&(&zone->lock)->rlock){-.-.}, at: get_page_from_freelist+0x1bae/0x52a0 mm/page_alloc.c:3491 It appears to be a false positive in that the only way the lock ordering should be inverted is if kswapd is waking itself and the wakeup allocates debugging objects which should already be allocated if it's kswapd doing the waking. Nevertheless, the possibility exists and so it's best to avoid the problem. This patch flags a zone as needing a kswapd using the, surprisingly, unused zone flag field. The flag is read without the lock held to do the wakeup. It's possible that the flag setting context is not the same as the flag clearing context or for small races to occur. However, each race possibility is harmless and there is no visible degredation in fragmentation treatment. While zone->flag could have continued to be unused, there is potential for moving some existing fields into the flags field instead. Particularly read-mostly ones like zone->initialized and zone->contiguous. Link: http://lkml.kernel.org/r/20190103225712.GJ31517@techsingularity.net Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs") Reported-by: syzbot+93d94a001cfbce9e60e1@syzkaller.appspotmail.com Signed-off-by: Mel Gorman Acked-by: Vlastimil Babka Tested-by: Qian Cai Cc: Dmitry Vyukov Cc: Vlastimil Babka Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 ++++++ mm/page_alloc.c | 8 +++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index cc4a507d7ca4..842f9189537b 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -520,6 +520,12 @@ enum pgdat_flags { PGDAT_RECLAIM_LOCKED, /* prevents concurrent reclaim */ }; +enum zone_flags { + ZONE_BOOSTED_WATERMARK, /* zone recently boosted watermarks. + * Cleared when kswapd is woken. + */ +}; + static inline unsigned long zone_managed_pages(struct zone *zone) { return (unsigned long)atomic_long_read(&zone->managed_pages); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cde5dac6229a..d295c9bc01a8 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2214,7 +2214,7 @@ static void steal_suitable_fallback(struct zone *zone, struct page *page, */ boost_watermark(zone); if (alloc_flags & ALLOC_KSWAPD) - wakeup_kswapd(zone, 0, 0, zone_idx(zone)); + set_bit(ZONE_BOOSTED_WATERMARK, &zone->flags); /* We are not allowed to try stealing from the whole block */ if (!whole_block) @@ -3102,6 +3102,12 @@ struct page *rmqueue(struct zone *preferred_zone, local_irq_restore(flags); out: + /* Separate test+clear to avoid unnecessary atomics */ + if (test_bit(ZONE_BOOSTED_WATERMARK, &zone->flags)) { + clear_bit(ZONE_BOOSTED_WATERMARK, &zone->flags); + wakeup_kswapd(zone, 0, 0, zone_idx(zone)); + } + VM_BUG_ON_PAGE(page && bad_range(zone, page), page); return page; From 9cb2feb4d21d97386eb25c7b67e2793efcc1e70a Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Tue, 8 Jan 2019 22:15:15 +0900 Subject: [PATCH 139/246] arch/openrisc: Fix issues with access_ok() The commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") exposed incorrect implementations of access_ok() macro in several architectures. This change fixes 2 issues found in OpenRISC. OpenRISC was not properly using parenthesis for arguments and also using arguments twice. This patch fixes those 2 issues. I test booted this patch with v5.0-rc1 on qemu and it's working fine. Cc: Guenter Roeck Cc: Linus Torvalds Reported-by: Linus Torvalds Signed-off-by: Stafford Horne Signed-off-by: Linus Torvalds --- arch/openrisc/include/asm/uaccess.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/openrisc/include/asm/uaccess.h b/arch/openrisc/include/asm/uaccess.h index bc8191a34db7..a44682c8adc3 100644 --- a/arch/openrisc/include/asm/uaccess.h +++ b/arch/openrisc/include/asm/uaccess.h @@ -58,8 +58,12 @@ /* Ensure that addr is below task's addr_limit */ #define __addr_ok(addr) ((unsigned long) addr < get_fs()) -#define access_ok(addr, size) \ - __range_ok((unsigned long)addr, (unsigned long)size) +#define access_ok(addr, size) \ +({ \ + unsigned long __ao_addr = (unsigned long)(addr); \ + unsigned long __ao_size = (unsigned long)(size); \ + __range_ok(__ao_addr, __ao_size); \ +}) /* * These are the main single-value transfer routines. They automatically From 40405851af73c59678ffd8f490e6b288c7fbaf29 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 8 Jan 2019 16:57:34 -0500 Subject: [PATCH 140/246] block: clarify documentation for blk_{start|finish}_plug There was some confusion about what these functions did. Make it clear that this is a hint for upper layers to pass to the block layer, and that it does not guarantee that I/O will not be submitted between a start and finish plug. Reported-by: "Darrick J. Wong" Reviewed-by: Darrick J. Wong Reviewed-by: Ming Lei Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/blk-core.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index c78042975737..f2732f106a2e 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1683,6 +1683,15 @@ EXPORT_SYMBOL(kblockd_mod_delayed_work_on); * @plug: The &struct blk_plug that needs to be initialized * * Description: + * blk_start_plug() indicates to the block layer an intent by the caller + * to submit multiple I/O requests in a batch. The block layer may use + * this hint to defer submitting I/Os from the caller until blk_finish_plug() + * is called. However, the block layer may choose to submit requests + * before a call to blk_finish_plug() if the number of queued I/Os + * exceeds %BLK_MAX_REQUEST_COUNT, or if the size of the I/O is larger than + * %BLK_PLUG_FLUSH_SIZE. The queued I/Os may also be submitted early if + * the task schedules (see below). + * * Tracking blk_plug inside the task_struct will help with auto-flushing the * pending I/O should the task end up blocking between blk_start_plug() and * blk_finish_plug(). This is important from a performance perspective, but @@ -1765,6 +1774,16 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) blk_mq_flush_plug_list(plug, from_schedule); } +/** + * blk_finish_plug - mark the end of a batch of submitted I/O + * @plug: The &struct blk_plug passed to blk_start_plug() + * + * Description: + * Indicate that a batch of I/O submissions is complete. This function + * must be paired with an initial call to blk_start_plug(). The intent + * is to allow the block layer to optimize I/O submission. See the + * documentation for blk_start_plug() for more information. + */ void blk_finish_plug(struct blk_plug *plug) { if (plug != current->plug) From f0e9943725186ddbdc9718a559c26c5f507262f2 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Sat, 29 Dec 2018 11:13:10 +0800 Subject: [PATCH 141/246] drm/i915/gvt: Fix workload request allocation before request add In commit 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change"), forgot to handle workload scan path in ELSP handler case which was to optimize scanning earlier instead of in gvt submission thread, so request alloc and add was splitting then which is against right process. This trys to do a partial revert of that commit which still has workload request alloc helper and make sure shadow state population is handled after request alloc for target state buffer. v3: Fix missed workload status setting in request alloc error path v2: Fix dispatch workload err path that should add request after alloc anyway. Fixes: 6bb2a2af8b1b ("drm/i915/gvt: Fix crash after request->hw_context change") Cc: Bin Yang Cc: Chris Wilson Tested-by: Bin Yang Reviewed-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 64 ++++++++++++++++++---------- drivers/gpu/drm/i915/gvt/scheduler.h | 1 + 2 files changed, 43 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 1ad8c5e1455d..5567ddc7760f 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -356,6 +356,33 @@ static int set_context_ppgtt_from_shadow(struct intel_vgpu_workload *workload, return 0; } +static int +intel_gvt_workload_req_alloc(struct intel_vgpu_workload *workload) +{ + struct intel_vgpu *vgpu = workload->vgpu; + struct intel_vgpu_submission *s = &vgpu->submission; + struct i915_gem_context *shadow_ctx = s->shadow_ctx; + struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; + struct intel_engine_cs *engine = dev_priv->engine[workload->ring_id]; + struct i915_request *rq; + int ret = 0; + + lockdep_assert_held(&dev_priv->drm.struct_mutex); + + if (workload->req) + goto out; + + rq = i915_request_alloc(engine, shadow_ctx); + if (IS_ERR(rq)) { + gvt_vgpu_err("fail to allocate gem request\n"); + ret = PTR_ERR(rq); + goto out; + } + workload->req = i915_request_get(rq); +out: + return ret; +} + /** * intel_gvt_scan_and_shadow_workload - audit the workload by scanning and * shadow it as well, include ringbuffer,wa_ctx and ctx. @@ -372,12 +399,11 @@ int intel_gvt_scan_and_shadow_workload(struct intel_vgpu_workload *workload) struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; struct intel_engine_cs *engine = dev_priv->engine[workload->ring_id]; struct intel_context *ce; - struct i915_request *rq; int ret; lockdep_assert_held(&dev_priv->drm.struct_mutex); - if (workload->req) + if (workload->shadow) return 0; ret = set_context_ppgtt_from_shadow(workload, shadow_ctx); @@ -417,22 +443,8 @@ int intel_gvt_scan_and_shadow_workload(struct intel_vgpu_workload *workload) goto err_shadow; } - rq = i915_request_alloc(engine, shadow_ctx); - if (IS_ERR(rq)) { - gvt_vgpu_err("fail to allocate gem request\n"); - ret = PTR_ERR(rq); - goto err_shadow; - } - workload->req = i915_request_get(rq); - - ret = populate_shadow_context(workload); - if (ret) - goto err_req; - + workload->shadow = true; return 0; -err_req: - rq = fetch_and_zero(&workload->req); - i915_request_put(rq); err_shadow: release_shadow_wa_ctx(&workload->wa_ctx); err_unpin: @@ -671,23 +683,31 @@ static int dispatch_workload(struct intel_vgpu_workload *workload) mutex_lock(&vgpu->vgpu_lock); mutex_lock(&dev_priv->drm.struct_mutex); + ret = intel_gvt_workload_req_alloc(workload); + if (ret) + goto err_req; + ret = intel_gvt_scan_and_shadow_workload(workload); if (ret) goto out; + ret = populate_shadow_context(workload); + if (ret) { + release_shadow_wa_ctx(&workload->wa_ctx); + goto out; + } + ret = prepare_workload(workload); - out: - if (ret) - workload->status = ret; - if (!IS_ERR_OR_NULL(workload->req)) { gvt_dbg_sched("ring id %d submit workload to i915 %p\n", ring_id, workload->req); i915_request_add(workload->req); workload->dispatched = true; } - +err_req: + if (ret) + workload->status = ret; mutex_unlock(&dev_priv->drm.struct_mutex); mutex_unlock(&vgpu->vgpu_lock); return ret; diff --git a/drivers/gpu/drm/i915/gvt/scheduler.h b/drivers/gpu/drm/i915/gvt/scheduler.h index ca5529d0e48e..2065cba59aab 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.h +++ b/drivers/gpu/drm/i915/gvt/scheduler.h @@ -83,6 +83,7 @@ struct intel_vgpu_workload { struct i915_request *req; /* if this workload has been dispatched to i915? */ bool dispatched; + bool shadow; /* if workload has done shadow of guest request */ int status; struct intel_vgpu_mm *shadow_mm; From 4d4b0c52bde470c379f5d168d5c139ad866cb808 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 9 Jan 2019 16:23:37 +0800 Subject: [PATCH 142/246] ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode for ALC225 Forgot to add unplug function to unplug state of headset mode for ALC225. Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 396ec43a2a54..2c5c8ad84783 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4102,6 +4102,7 @@ static void alc_headset_mode_unplugged(struct hda_codec *codec) case 0x10ec0295: case 0x10ec0289: case 0x10ec0299: + alc_process_coef_fw(codec, alc225_pre_hsmode); alc_process_coef_fw(codec, coef0225); break; case 0x10ec0867: From d1dd42110d2727e81b9265841a62bc84c454c3a2 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 9 Jan 2019 17:05:24 +0800 Subject: [PATCH 143/246] ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225 Disable Headset Mic VREF for headset mode of ALC225. This will be controlled by coef bits of headset mode functions. [ Fixed a compile warning and code simplification -- tiwai ] Signed-off-by: Kailang Yang Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2c5c8ad84783..0b3e7a18ca78 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5441,6 +5441,13 @@ static void alc_fixup_headset_jack(struct hda_codec *codec, } } +static void alc_fixup_disable_mic_vref(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + if (action == HDA_FIXUP_ACT_PRE_PROBE) + snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ); +} + /* for hda_fixup_thinkpad_acpi() */ #include "thinkpad_helper.c" @@ -5550,6 +5557,7 @@ enum { ALC293_FIXUP_LENOVO_SPK_NOISE, ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY, ALC255_FIXUP_DELL_SPK_NOISE, + ALC225_FIXUP_DISABLE_MIC_VREF, ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, ALC295_FIXUP_DISABLE_DAC3, ALC280_FIXUP_HP_HEADSET_MIC, @@ -6269,6 +6277,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE }, + [ALC225_FIXUP_DISABLE_MIC_VREF] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_disable_mic_vref, + .chained = true, + .chain_id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE + }, [ALC225_FIXUP_DELL1_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -6278,7 +6292,7 @@ static const struct hda_fixup alc269_fixups[] = { {} }, .chained = true, - .chain_id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE + .chain_id = ALC225_FIXUP_DISABLE_MIC_VREF }, [ALC280_FIXUP_HP_HEADSET_MIC] = { .type = HDA_FIXUP_FUNC, From 90802938f7e88045ace123e105e22e8c3e7f9c7e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 8 Jan 2019 17:38:29 +0100 Subject: [PATCH 144/246] x86/cache: Rename config option to CONFIG_X86_RESCTRL CONFIG_RESCTRL is too generic. The final goal is to have a generic option called like this which is selected by the arch-specific ones CONFIG_X86_RESCTRL and CONFIG_ARM64_RESCTRL. The generic one will cover the resctrl filesystem and other generic and shared bits of functionality. Signed-off-by: Borislav Petkov Suggested-by: Ingo Molnar Requested-by: Linus Torvalds Cc: Babu Moger Cc: Fenghua Yu Cc: James Morse Cc: Reinette Chatre Cc: Tony Luck Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20190108171401.GC12235@zn.tnic --- Documentation/x86/resctrl_ui.txt | 2 +- arch/x86/Kconfig | 2 +- arch/x86/include/asm/resctrl_sched.h | 4 ++-- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/kernel/cpu/resctrl/Makefile | 4 ++-- include/linux/sched.h | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/x86/resctrl_ui.txt b/Documentation/x86/resctrl_ui.txt index d9aed8303984..e8e8d14d3c4e 100644 --- a/Documentation/x86/resctrl_ui.txt +++ b/Documentation/x86/resctrl_ui.txt @@ -9,7 +9,7 @@ Fenghua Yu Tony Luck Vikas Shivappa -This feature is enabled by the CONFIG_RESCTRL and the X86 /proc/cpuinfo +This feature is enabled by the CONFIG_X86_RESCTRL and the x86 /proc/cpuinfo flag bits: RDT (Resource Director Technology) Allocation - "rdt_a" CAT (Cache Allocation Technology) - "cat_l3", "cat_l2" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6185d4f33296..15af091611e2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -446,7 +446,7 @@ config RETPOLINE branches. Requires a compiler with -mindirect-branch=thunk-extern support for full protection. The kernel may run slower. -config RESCTRL +config X86_RESCTRL bool "Resource Control support" depends on X86 && (CPU_SUP_INTEL || CPU_SUP_AMD) select KERNFS diff --git a/arch/x86/include/asm/resctrl_sched.h b/arch/x86/include/asm/resctrl_sched.h index 54990fe2a3ae..40ebddde6ac2 100644 --- a/arch/x86/include/asm/resctrl_sched.h +++ b/arch/x86/include/asm/resctrl_sched.h @@ -2,7 +2,7 @@ #ifndef _ASM_X86_RESCTRL_SCHED_H #define _ASM_X86_RESCTRL_SCHED_H -#ifdef CONFIG_RESCTRL +#ifdef CONFIG_X86_RESCTRL #include #include @@ -88,6 +88,6 @@ static inline void resctrl_sched_in(void) static inline void resctrl_sched_in(void) {} -#endif /* CONFIG_RESCTRL */ +#endif /* CONFIG_X86_RESCTRL */ #endif /* _ASM_X86_RESCTRL_SCHED_H */ diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index ac78f90aea56..b6fa0869f7aa 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -39,7 +39,7 @@ obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o obj-$(CONFIG_X86_MCE) += mce/ obj-$(CONFIG_MTRR) += mtrr/ obj-$(CONFIG_MICROCODE) += microcode/ -obj-$(CONFIG_RESCTRL) += resctrl/ +obj-$(CONFIG_X86_RESCTRL) += resctrl/ obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o diff --git a/arch/x86/kernel/cpu/resctrl/Makefile b/arch/x86/kernel/cpu/resctrl/Makefile index 6895049ceef7..1cabe6fd8e11 100644 --- a/arch/x86/kernel/cpu/resctrl/Makefile +++ b/arch/x86/kernel/cpu/resctrl/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_RESCTRL) += core.o rdtgroup.o monitor.o -obj-$(CONFIG_RESCTRL) += ctrlmondata.o pseudo_lock.o +obj-$(CONFIG_X86_RESCTRL) += core.o rdtgroup.o monitor.o +obj-$(CONFIG_X86_RESCTRL) += ctrlmondata.o pseudo_lock.o CFLAGS_pseudo_lock.o = -I$(src) diff --git a/include/linux/sched.h b/include/linux/sched.h index 89541d248893..224666226e87 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -995,7 +995,7 @@ struct task_struct { /* cg_list protected by css_set_lock and tsk->alloc_lock: */ struct list_head cg_list; #endif -#ifdef CONFIG_RESCTRL +#ifdef CONFIG_X86_RESCTRL u32 closid; u32 rmid; #endif From e4f358916d528d479c3c12bd2fd03f2d5a576380 Mon Sep 17 00:00:00 2001 From: WANG Chao Date: Tue, 11 Dec 2018 00:37:25 +0800 Subject: [PATCH 145/246] x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao Signed-off-by: Borislav Petkov Reviewed-by: Zhenzhong Duan Reviewed-by: Masahiro Yamada Cc: "H. Peter Anvin" Cc: Andi Kleen Cc: Andrew Morton Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Daniel Borkmann Cc: David Woodhouse Cc: Geert Uytterhoeven Cc: Jessica Yu Cc: Jiri Kosina Cc: Kees Cook Cc: Konrad Rzeszutek Wilk Cc: Luc Van Oostenryck Cc: Michal Marek Cc: Miguel Ojeda Cc: Peter Zijlstra Cc: Tim Chen Cc: Vasily Gorbik Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable Cc: x86-ml Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn --- arch/x86/kernel/cpu/bugs.c | 2 +- include/linux/compiler-gcc.h | 2 +- include/linux/module.h | 2 +- scripts/mod/modpost.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 8654b8b0c848..1de0f4170178 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -215,7 +215,7 @@ static enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init = static enum spectre_v2_user_mitigation spectre_v2_user __ro_after_init = SPECTRE_V2_USER_NONE; -#ifdef RETPOLINE +#ifdef CONFIG_RETPOLINE static bool spectre_v2_bad_module; bool retpoline_module_ok(bool has_retpoline) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 5776da43da97..dd8268f5f5f0 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -68,7 +68,7 @@ */ #define uninitialized_var(x) x = x -#ifdef RETPOLINE +#ifdef CONFIG_RETPOLINE #define __noretpoline __attribute__((__indirect_branch__("keep"))) #endif diff --git a/include/linux/module.h b/include/linux/module.h index 9a21fe3509af..8fa38d3e7538 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -828,7 +828,7 @@ static inline void module_bug_finalize(const Elf_Ehdr *hdr, static inline void module_bug_cleanup(struct module *mod) {} #endif /* CONFIG_GENERIC_BUG */ -#ifdef RETPOLINE +#ifdef CONFIG_RETPOLINE extern bool retpoline_module_ok(bool has_retpoline); #else static inline bool retpoline_module_ok(bool has_retpoline) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 0de2fb236640..26bf886bd168 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -2185,7 +2185,7 @@ static void add_intree_flag(struct buffer *b, int is_intree) /* Cannot check for assembler */ static void add_retpoline(struct buffer *b) { - buf_printf(b, "\n#ifdef RETPOLINE\n"); + buf_printf(b, "\n#ifdef CONFIG_RETPOLINE\n"); buf_printf(b, "MODULE_INFO(retpoline, \"Y\");\n"); buf_printf(b, "#endif\n"); } From 4842379cbe6e851de914a7132f76f4e200b9a98b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:48 +0200 Subject: [PATCH 146/246] drm/bridge: tc358767: add bus flags tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-2-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 8e28e738cb52..29a7e33e8ae0 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1195,6 +1195,10 @@ static int tc_bridge_attach(struct drm_bridge *bridge) drm_display_info_set_bus_formats(&tc->connector.display_info, &bus_format, 1); + tc->connector.display_info.bus_flags = + DRM_BUS_FLAG_DE_HIGH | + DRM_BUS_FLAG_PIXDATA_NEGEDGE | + DRM_BUS_FLAG_SYNC_NEGEDGE; drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder); return 0; From adf4109896bbee27fd2ac3b48d22d6a0062fe517 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:49 +0200 Subject: [PATCH 147/246] drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-3-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 29a7e33e8ae0..5f0a666db2fd 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -142,6 +142,8 @@ #define DP0_LTLOOPCTRL 0x06d8 #define DP0_SNKLTCTRL 0x06e4 +#define DP1_SRCCTRL 0x07a0 + /* PHY */ #define DP_PHY_CTRL 0x0800 #define DP_PHY_RST BIT(28) /* DP PHY Global Soft Reset */ @@ -150,6 +152,7 @@ #define PHY_M1_RST BIT(12) /* Reset PHY1 Main Channel */ #define PHY_RDY BIT(16) /* PHY Main Channels Ready */ #define PHY_M0_RST BIT(8) /* Reset PHY0 Main Channel */ +#define PHY_2LANE BIT(2) /* PHY Enable 2 lanes */ #define PHY_A0_EN BIT(1) /* PHY Aux Channel0 Enable */ #define PHY_M0_EN BIT(0) /* PHY Main Channel0 Enable */ @@ -564,7 +567,7 @@ static int tc_aux_link_setup(struct tc_data *tc) value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2; tc_write(SYS_PLLPARAM, value); - tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN); + tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN); /* * Initially PLLs are in bypass. Force PLL parameter update, @@ -834,7 +837,7 @@ static int tc_main_link_setup(struct tc_data *tc) DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 | DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT); /* from excel file - DP1_SrcCtrl */ - tc_write(0x07a0, 0x00003083); + tc_write(DP1_SRCCTRL, 0x00003083); rate = clk_get_rate(tc->refclk); switch (rate) { @@ -855,8 +858,9 @@ static int tc_main_link_setup(struct tc_data *tc) } value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2; tc_write(SYS_PLLPARAM, value); + /* Setup Main Link */ - dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN | PHY_M0_EN; + dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN | PHY_M0_EN; tc_write(DP_PHY_CTRL, dp_phy_ctrl); msleep(100); From 4d9d54a730434cc068dd3515ba6116697196f77b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:50 +0200 Subject: [PATCH 148/246] drm/bridge: tc358767: fix single lane configuration PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-4-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 5f0a666db2fd..fee53422c31f 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -543,6 +543,7 @@ static int tc_aux_link_setup(struct tc_data *tc) unsigned long rate; u32 value; int ret; + u32 dp_phy_ctrl; rate = clk_get_rate(tc->refclk); switch (rate) { @@ -567,7 +568,10 @@ static int tc_aux_link_setup(struct tc_data *tc) value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2; tc_write(SYS_PLLPARAM, value); - tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN); + dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN; + if (tc->link.base.num_lanes == 2) + dp_phy_ctrl |= PHY_2LANE; + tc_write(DP_PHY_CTRL, dp_phy_ctrl); /* * Initially PLLs are in bypass. Force PLL parameter update, @@ -860,7 +864,9 @@ static int tc_main_link_setup(struct tc_data *tc) tc_write(SYS_PLLPARAM, value); /* Setup Main Link */ - dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_2LANE | PHY_A0_EN | PHY_M0_EN; + dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN; + if (tc->link.base.num_lanes == 2) + dp_phy_ctrl |= PHY_2LANE; tc_write(DP_PHY_CTRL, dp_phy_ctrl); msleep(100); From 9a63bd6fe1b5590ffa42ae2ed22ee21363293e31 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:51 +0200 Subject: [PATCH 149/246] drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-5-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index fee53422c31f..ab299f4debfa 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -836,12 +836,11 @@ static int tc_main_link_setup(struct tc_data *tc) if (!tc->mode) return -EINVAL; - /* from excel file - DP0_SrcCtrl */ - tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B | - DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 | - DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT); - /* from excel file - DP1_SrcCtrl */ - tc_write(DP1_SRCCTRL, 0x00003083); + tc_write(DP0_SRCCTRL, tc_srcctrl(tc)); + /* SSCG and BW27 on DP1 must be set to the same as on DP0 */ + tc_write(DP1_SRCCTRL, + (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) | + ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0)); rate = clk_get_rate(tc->refclk); switch (rate) { From 51b9e62eb6950c762162ab7eb8390990179be067 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:52 +0200 Subject: [PATCH 150/246] drm/bridge: tc358767: reject modes which require too much BW The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-6-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index ab299f4debfa..a1f3dd2afbb1 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1114,10 +1114,20 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge, static enum drm_mode_status tc_connector_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct tc_data *tc = connector_to_tc(connector); + u32 req, avail; + u32 bits_per_pixel = 24; + /* DPI interface clock limitation: upto 154 MHz */ if (mode->clock > 154000) return MODE_CLOCK_HIGH; + req = mode->clock * bits_per_pixel / 8; + avail = tc->link.base.num_lanes * tc->link.base.rate; + + if (req > avail) + return MODE_BAD; + return MODE_OK; } From 7923e09c7a766e2d58de7fc395bb84c18e5bc625 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:53 +0200 Subject: [PATCH 151/246] drm/bridge: tc358767: fix output H/V syncs The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-7-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index a1f3dd2afbb1..391547358756 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -98,6 +98,8 @@ #define DP0_STARTVAL 0x064c #define DP0_ACTIVEVAL 0x0650 #define DP0_SYNCVAL 0x0654 +#define SYNCVAL_HS_POL_ACTIVE_LOW (1 << 15) +#define SYNCVAL_VS_POL_ACTIVE_LOW (1 << 31) #define DP0_MISC 0x0658 #define TU_SIZE_RECOMMENDED (63) /* LSCLK cycles per TU */ #define BPC_6 (0 << 5) @@ -726,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode) tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay)); - tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0)); + tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) | + ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) | + ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0)); tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW | DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888); From f8c15790e4d8bdf2d21a5e9d43b5f97983af1222 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 3 Jan 2019 13:59:54 +0200 Subject: [PATCH 152/246] drm/bridge: tc358767: use DP connector if no panel set tc358767 driver sets the connector type always to eDP. This patch sets the type to DP if there is no panel defined, which implies that there's a DP connector on the board. Signed-off-by: Tomi Valkeinen Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190103115954.12785-8-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 391547358756..e6403b9549f1 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1209,7 +1209,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge) /* Create eDP connector */ drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs); ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, - DRM_MODE_CONNECTOR_eDP); + tc->panel ? DRM_MODE_CONNECTOR_eDP : + DRM_MODE_CONNECTOR_DisplayPort); if (ret) return ret; From 7604bf0920985c9280c8b24e2f0c3e4ed47f502f Mon Sep 17 00:00:00 2001 From: Otto Sabart Date: Wed, 9 Jan 2019 00:56:51 +0100 Subject: [PATCH 153/246] doc: trace: fix reference to cpuidle documentation file Old cpuidle/sysfs.txt file was replaced in aa5eee355b46. So, refer to an updated file. Fixes: aa5eee355b46 (Documentation: admin-guide: PM: Add cpuidle document) Signed-off-by: Otto Sabart Signed-off-by: Rafael J. Wysocki --- Documentation/trace/coresight-cpu-debug.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/trace/coresight-cpu-debug.txt b/Documentation/trace/coresight-cpu-debug.txt index 89ab09e78e8d..f07e38094b40 100644 --- a/Documentation/trace/coresight-cpu-debug.txt +++ b/Documentation/trace/coresight-cpu-debug.txt @@ -165,7 +165,7 @@ Do some work... The same can also be done from an application program. Disable specific CPU's specific idle state from cpuidle sysfs (see -Documentation/cpuidle/sysfs.txt): +Documentation/admin-guide/pm/cpuidle.rst): # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable From 0e141d1c65c1dd31c914eb2e11651adcc1a15912 Mon Sep 17 00:00:00 2001 From: Quentin Perret Date: Wed, 9 Jan 2019 10:42:36 +0000 Subject: [PATCH 154/246] cpufreq: scmi: Fix frequency invariance in slow path The scmi-cpufreq driver calls the arch_set_freq_scale() callback on frequency changes to provide scale-invariant load-tracking signals to the scheduler. However, in the slow path, it does so while specifying the current and max frequencies in different units, hence resulting in a broken freq_scale factor. Fix this by passing all frequencies in KHz, as stored in the CPUFreq frequency table. Fixes: 99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol) Signed-off-by: Quentin Perret Acked-by: Viresh Kumar Acked-by: Sudeep Holla Cc: 4.17+ # v4.17+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/scmi-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index c2e66528f5ee..242c3370544e 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -52,9 +52,9 @@ scmi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index) int ret; struct scmi_data *priv = policy->driver_data; struct scmi_perf_ops *perf_ops = handle->perf_ops; - u64 freq = policy->freq_table[index].frequency * 1000; + u64 freq = policy->freq_table[index].frequency; - ret = perf_ops->freq_set(handle, priv->domain_id, freq, false); + ret = perf_ops->freq_set(handle, priv->domain_id, freq * 1000, false); if (!ret) arch_set_freq_scale(policy->related_cpus, freq, policy->cpuinfo.max_freq); From 498c203d855eaf6571b63ea860a53862c4fe91b7 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 9 Jan 2019 10:02:12 -0300 Subject: [PATCH 155/246] tools include uapi: Sync linux/if_link.h copy with the kernel sources To pick the changes from: a428afe82f98 ("net: bridge: add support for user-controlled bool options") a025fb5f49ad ("geneve: Allow configuration of DF behaviour") b4d3069783bc ("vxlan: Allow configuration of DF behaviour") Silencing this tools/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter Cc: David S. Miller Cc: Jiri Olsa Cc: Namhyung Kim Cc: Nikolay Aleksandrov Cc: Stefano Brivio Link: https://lkml.kernel.org/n/tip-wq410s2wuqv5k980bidw0ju8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/if_link.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index 1debfa42cba1..d6533828123a 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -288,6 +288,7 @@ enum { IFLA_BR_MCAST_IGMP_VERSION, IFLA_BR_MCAST_MLD_VERSION, IFLA_BR_VLAN_STATS_PER_PORT, + IFLA_BR_MULTI_BOOLOPT, __IFLA_BR_MAX, }; @@ -533,6 +534,7 @@ enum { IFLA_VXLAN_LABEL, IFLA_VXLAN_GPE, IFLA_VXLAN_TTL_INHERIT, + IFLA_VXLAN_DF, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) @@ -542,6 +544,14 @@ struct ifla_vxlan_port_range { __be16 high; }; +enum ifla_vxlan_df { + VXLAN_DF_UNSET = 0, + VXLAN_DF_SET, + VXLAN_DF_INHERIT, + __VXLAN_DF_END, + VXLAN_DF_MAX = __VXLAN_DF_END - 1, +}; + /* GENEVE section */ enum { IFLA_GENEVE_UNSPEC, @@ -557,10 +567,19 @@ enum { IFLA_GENEVE_UDP_ZERO_CSUM6_RX, IFLA_GENEVE_LABEL, IFLA_GENEVE_TTL_INHERIT, + IFLA_GENEVE_DF, __IFLA_GENEVE_MAX }; #define IFLA_GENEVE_MAX (__IFLA_GENEVE_MAX - 1) +enum ifla_geneve_df { + GENEVE_DF_UNSET = 0, + GENEVE_DF_SET, + GENEVE_DF_INHERIT, + __GENEVE_DF_END, + GENEVE_DF_MAX = __GENEVE_DF_END - 1, +}; + /* PPP section */ enum { IFLA_PPP_UNSPEC, From f7fa1107f30e13255fb9a5359d357e07d3721b0b Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 8 Jan 2019 11:42:54 +0000 Subject: [PATCH 156/246] Btrfs: fix race between cloning range ending at eof and writeback The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between writeback and cloning a range that covers the eof extent of the source file into a destination offset that is greater then the same file's size. This happens because we now wait for writeback to complete before doing the truncation of the eof block, while previously we did the truncation and then waited for writeback to complete. This leads to a race between writeback of the truncated block and cloning the file extents in the source range, because we copy each file extent item we find in the fs root into a buffer, then release the path and then increment the reference count for the extent referred in that file extent item we copied, which can no longer exist if writeback of the truncated eof block completes after we copied the file extent item into the buffer and before we incremented the reference count. This is illustrated by the following diagram: CPU 1 CPU 2 btrfs_clone_files() btrfs_cont_expand() btrfs_truncate_block() --> zeroes part of the page containg eof, marking it for delalloc btrfs_clone() --> finds extent item covering eof, points to extent at bytenr X --> copies it into a local buffer --> releases path writeback starts btrfs_finish_ordered_io() insert_reserved_file_extent() __btrfs_drop_extents() --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by waiting for writeback to complete after truncating the eof block. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index fab9443f6a42..d0da86ac53bf 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3905,9 +3905,24 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src, len = ALIGN(src->i_size, bs) - off; if (destoff > inode->i_size) { + const u64 wb_start = ALIGN_DOWN(inode->i_size, bs); + ret = btrfs_cont_expand(inode, inode->i_size, destoff); if (ret) return ret; + /* + * We may have truncated the last block if the inode's size is + * not sector size aligned, so we need to wait for writeback to + * complete before proceeding further, otherwise we can race + * with cloning and attempt to increment a reference to an + * extent that no longer exists (writeback completed right after + * we found the previous extent covering eof and before we + * attempted to increment its reference count). + */ + ret = btrfs_wait_ordered_range(inode, wb_start, + destoff - wb_start); + if (ret) + return ret; } /* From d8b5524242108cb7d28c9b8b9aded7c1edd0e8a8 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 8 Jan 2019 11:43:07 +0000 Subject: [PATCH 157/246] Btrfs: fix race between reflink/dedupe and relocation The recent rework that makes btrfs' remap_file_range operation use the generic helper generic_remap_file_range_prep() introduced a race between relocation and reflinking (for both cloning and deduplication) the file extents between the source and destination inodes. This happens because we no longer lock the source range anymore, and we do not lock it anymore because we wait for direct IO writes and writeback to complete early on the code path right after locking the inodes, which guarantees no other file operations interfere with the reflinking. However there is one exception which is relocation, since it replaces the byte number of file extents items in the fs tree after locking the range the file extent items represent. This is a problem because after finding each file extent to clone in the fs tree, the reflink process copies the file extent item into a local buffer, releases the search path, inserts new file extent items in the destination range and then increments the reference count for the extent mentioned in the file extent item that it previously copied to the buffer. If right after copying the file extent item into the buffer and releasing the path the relocation process updates the file extent item to point to the new extent, the reflink process ends up creating a delayed reference to increment the reference count of the old extent, for which the relocation process already created a delayed reference to drop it. This results in failure to run delayed references because we will attempt to increment the count of a reference that was already dropped. This is illustrated by the following diagram: CPU 1 CPU 2 relocation is running btrfs_clone_files() btrfs_clone() --> finds extent item in source range point to extent at bytenr X --> copies it into a local buffer --> releases path replace_file_extents() --> successfully locks the range represented by the file extent item --> replaces disk_bytenr field in the file extent item with some other value Y --> creates delayed reference to increment reference count for extent at bytenr Y --> creates delayed reference to drop the extent at bytenr X --> starts transaction --> creates delayed reference to increment extent at bytenr X When this race is hit the running transaction ends up getting aborted with an -EIO error and a trace like the following is produced: [ 4382.553858] WARNING: CPU: 2 PID: 3648 at fs/btrfs/extent-tree.c:1552 lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556293] CPU: 2 PID: 3648 Comm: btrfs Tainted: G W 4.20.0-rc6-btrfs-next-41 #1 [ 4382.556294] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [ 4382.556308] RIP: 0010:lookup_inline_extent_backref+0x4f4/0x650 [btrfs] (...) [ 4382.556310] RSP: 0018:ffffac784408f738 EFLAGS: 00010202 [ 4382.556311] RAX: 0000000000000001 RBX: ffff8980673c3a48 RCX: 0000000000000001 [ 4382.556312] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000000 [ 4382.556312] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 [ 4382.556313] R10: 0000000000000001 R11: ffff897f40000000 R12: 0000000000001000 [ 4382.556313] R13: 00000000c224f000 R14: ffff89805de9bd40 R15: ffff8980453f4548 [ 4382.556315] FS: 00007f5e759178c0(0000) GS:ffff89807b300000(0000) knlGS:0000000000000000 [ 4382.563130] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4382.563562] CR2: 00007f2e9789fcbc CR3: 0000000120512001 CR4: 00000000003606e0 [ 4382.564005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4382.564451] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4382.564887] Call Trace: [ 4382.565343] insert_inline_extent_backref+0x55/0xe0 [btrfs] [ 4382.565796] __btrfs_inc_extent_ref.isra.60+0x88/0x260 [btrfs] [ 4382.566249] ? __btrfs_run_delayed_refs+0x93/0x1650 [btrfs] [ 4382.566702] __btrfs_run_delayed_refs+0xa22/0x1650 [btrfs] [ 4382.567162] btrfs_run_delayed_refs+0x7e/0x1d0 [btrfs] [ 4382.567623] btrfs_commit_transaction+0x50/0x9c0 [btrfs] [ 4382.568112] ? _raw_spin_unlock+0x24/0x30 [ 4382.568557] ? block_rsv_release_bytes+0x14e/0x410 [btrfs] [ 4382.569006] create_subvol+0x3c8/0x830 [btrfs] [ 4382.569461] ? btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.569906] btrfs_mksubvol+0x317/0x600 [btrfs] [ 4382.570383] ? rcu_sync_lockdep_assert+0xe/0x60 [ 4382.570822] ? __sb_start_write+0xd4/0x1c0 [ 4382.571262] ? mnt_want_write_file+0x24/0x50 [ 4382.571712] btrfs_ioctl_snap_create_transid+0x117/0x1a0 [btrfs] [ 4382.572155] ? _copy_from_user+0x66/0x90 [ 4382.572602] btrfs_ioctl_snap_create+0x66/0x80 [btrfs] [ 4382.573052] btrfs_ioctl+0x7c1/0x30e0 [btrfs] [ 4382.573502] ? mem_cgroup_commit_charge+0x8b/0x570 [ 4382.573946] ? do_raw_spin_unlock+0x49/0xc0 [ 4382.574379] ? _raw_spin_unlock+0x24/0x30 [ 4382.574803] ? __handle_mm_fault+0xf29/0x12d0 [ 4382.575215] ? do_vfs_ioctl+0xa2/0x6f0 [ 4382.575622] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [ 4382.576020] do_vfs_ioctl+0xa2/0x6f0 [ 4382.576405] ksys_ioctl+0x70/0x80 [ 4382.576776] __x64_sys_ioctl+0x16/0x20 [ 4382.577137] do_syscall_64+0x60/0x1b0 [ 4382.577488] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [ 4382.578837] RSP: 002b:00007ffe04bf64c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 4382.579174] RAX: ffffffffffffffda RBX: 00005564136f3050 RCX: 00007f5e74724dd7 [ 4382.579505] RDX: 00007ffe04bf64d0 RSI: 000000005000940e RDI: 0000000000000003 [ 4382.579848] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000044 [ 4382.580164] R10: 0000000000000541 R11: 0000000000000202 R12: 00005564136f3010 [ 4382.580477] R13: 0000000000000003 R14: 00005564136f3035 R15: 00005564136f3050 [ 4382.580792] irq event stamp: 0 [ 4382.581106] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 4382.581441] hardirqs last disabled at (0): [] copy_process.part.32+0x6e2/0x2320 [ 4382.581772] softirqs last enabled at (0): [] copy_process.part.32+0x6e2/0x2320 [ 4382.582095] softirqs last disabled at (0): [<0000000000000000>] (null) [ 4382.582413] ---[ end trace d3c188e3e9367382 ]--- [ 4382.623855] BTRFS: error (device sdc) in btrfs_run_delayed_refs:2981: errno=-5 IO failure [ 4382.624295] BTRFS info (device sdc): forced readonly Fix this by locking the source range before searching for the file extent items in the fs tree, since the relocation process will try to lock the range a file extent item represents before updating it with the new extent location. Fixes: 34a28e3d7753 ("Btrfs: use generic_remap_file_range_prep() for cloning and deduplication") Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 34 ++++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index d0da86ac53bf..9c8e1734429c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3221,6 +3221,26 @@ static void btrfs_double_inode_lock(struct inode *inode1, struct inode *inode2) inode_lock_nested(inode2, I_MUTEX_CHILD); } +static void btrfs_double_extent_unlock(struct inode *inode1, u64 loff1, + struct inode *inode2, u64 loff2, u64 len) +{ + unlock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1); + unlock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1); +} + +static void btrfs_double_extent_lock(struct inode *inode1, u64 loff1, + struct inode *inode2, u64 loff2, u64 len) +{ + if (inode1 < inode2) { + swap(inode1, inode2); + swap(loff1, loff2); + } else if (inode1 == inode2 && loff2 < loff1) { + swap(loff1, loff2); + } + lock_extent(&BTRFS_I(inode1)->io_tree, loff1, loff1 + len - 1); + lock_extent(&BTRFS_I(inode2)->io_tree, loff2, loff2 + len - 1); +} + static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 olen, struct inode *dst, u64 dst_loff) { @@ -3242,11 +3262,12 @@ static int btrfs_extent_same_range(struct inode *src, u64 loff, u64 olen, return -EINVAL; /* - * Lock destination range to serialize with concurrent readpages(). + * Lock destination range to serialize with concurrent readpages() and + * source range to serialize with relocation. */ - lock_extent(&BTRFS_I(dst)->io_tree, dst_loff, dst_loff + len - 1); + btrfs_double_extent_lock(src, loff, dst, dst_loff, len); ret = btrfs_clone(src, dst, loff, olen, len, dst_loff, 1); - unlock_extent(&BTRFS_I(dst)->io_tree, dst_loff, dst_loff + len - 1); + btrfs_double_extent_unlock(src, loff, dst, dst_loff, len); return ret; } @@ -3926,11 +3947,12 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src, } /* - * Lock destination range to serialize with concurrent readpages(). + * Lock destination range to serialize with concurrent readpages() and + * source range to serialize with relocation. */ - lock_extent(&BTRFS_I(inode)->io_tree, destoff, destoff + len - 1); + btrfs_double_extent_lock(src, off, inode, destoff, len); ret = btrfs_clone(src, inode, off, olen, len, destoff, 0); - unlock_extent(&BTRFS_I(inode)->io_tree, destoff, destoff + len - 1); + btrfs_double_extent_unlock(src, off, inode, destoff, len); /* * Truncate page cache pages so that future reads will see the cloned * data immediately and not the previous data. From a6d8654d885d7d79a3fb82da64eaa489ca332a82 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 8 Jan 2019 11:44:41 +0000 Subject: [PATCH 158/246] Btrfs: fix deadlock when using free space tree due to block group creation When modifying the free space tree we can end up COWing one of its extent buffers which in turn might result in allocating a new chunk, which in turn can result in flushing (finish creation) of pending block groups. If that happens we can deadlock because creating a pending block group needs to update the free space tree, and if any of the updates tries to modify the same extent buffer that we are COWing, we end up in a deadlock since we try to write lock twice the same extent buffer. So fix this by skipping pending block group creation if we are COWing an extent buffer from the free space tree. This is a case missed by commit 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202173 Fixes: 5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches") CC: stable@vger.kernel.org # 4.18+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ctree.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index d92462fe66c8..f64aad613727 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1016,19 +1016,21 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans, parent_start = parent->start; /* - * If we are COWing a node/leaf from the extent, chunk or device trees, - * make sure that we do not finish block group creation of pending block - * groups. We do this to avoid a deadlock. + * If we are COWing a node/leaf from the extent, chunk, device or free + * space trees, make sure that we do not finish block group creation of + * pending block groups. We do this to avoid a deadlock. * COWing can result in allocation of a new chunk, and flushing pending * block groups (btrfs_create_pending_block_groups()) can be triggered * when finishing allocation of a new chunk. Creation of a pending block - * group modifies the extent, chunk and device trees, therefore we could - * deadlock with ourselves since we are holding a lock on an extent - * buffer that btrfs_create_pending_block_groups() may try to COW later. + * group modifies the extent, chunk, device and free space trees, + * therefore we could deadlock with ourselves since we are holding a + * lock on an extent buffer that btrfs_create_pending_block_groups() may + * try to COW later. */ if (root == fs_info->extent_root || root == fs_info->chunk_root || - root == fs_info->dev_root) + root == fs_info->dev_root || + root == fs_info->free_space_root) trans->can_flush_pending_bgs = false; cow = btrfs_alloc_tree_block(trans, root, parent_start, From 47cb393ee4815e10ab66f981fed581afdcc7caac Mon Sep 17 00:00:00 2001 From: John Pittman Date: Tue, 8 Jan 2019 16:56:13 -0500 Subject: [PATCH 159/246] block: doc: add slice_idle_us to bfq documentation Of the tunables available for the bfq I/O scheduler, the only one missing from the documentation in 'Documentation/block/bfq-iosched.txt' is slice_idle_us. Add this tunable to the documentation and a short explanation of its purpose. Acked-by: Paolo Valente Signed-off-by: John Pittman Signed-off-by: Jens Axboe --- Documentation/block/bfq-iosched.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/block/bfq-iosched.txt b/Documentation/block/bfq-iosched.txt index 8d8d8f06cab2..98a8dd5ee385 100644 --- a/Documentation/block/bfq-iosched.txt +++ b/Documentation/block/bfq-iosched.txt @@ -357,6 +357,13 @@ video playing/streaming, a very low drop rate may be more important than maximum throughput. In these cases, consider setting the strict_guarantees parameter. +slice_idle_us +------------- + +Controls the same tuning parameter as slice_idle, but in microseconds. +Either tunable can be used to set idling behavior. Afterwards, the +other tunable will reflect the newly set value in sysfs. + strict_guarantees ----------------- From c61e678f30da733a1b7fdd5983d0770de2e6009c Mon Sep 17 00:00:00 2001 From: Jianchao Wang Date: Mon, 24 Dec 2018 11:15:53 +0800 Subject: [PATCH 160/246] nvme-pci: fix the wrong setting of nr_maps We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 5a0bf6a24d50..cc65fa8a537b 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2294,7 +2294,6 @@ static int nvme_dev_add(struct nvme_dev *dev) dev->tagset.nr_maps = 2; /* default + read */ if (dev->io_queues[HCTX_TYPE_POLL]) dev->tagset.nr_maps++; - dev->tagset.nr_maps = HCTX_MAX_TYPES; dev->tagset.timeout = NVME_IO_TIMEOUT; dev->tagset.numa_node = dev_to_node(dev->dev); dev->tagset.queue_depth = From cc667f6d5de023ee131e96bb88e5cddca23272bd Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Sat, 29 Dec 2018 17:23:43 +0000 Subject: [PATCH 161/246] nvme-pci: use the same attributes when freeing host_mem_desc_bufs. When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index cc65fa8a537b..efe46f518022 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1885,8 +1885,9 @@ static void nvme_free_host_mem(struct nvme_dev *dev) struct nvme_host_mem_buf_desc *desc = &dev->host_mem_descs[i]; size_t size = le32_to_cpu(desc->size) * dev->ctrl.page_size; - dma_free_coherent(dev->dev, size, dev->host_mem_desc_bufs[i], - le64_to_cpu(desc->addr)); + dma_free_attrs(dev->dev, size, dev->host_mem_desc_bufs[i], + le64_to_cpu(desc->addr), + DMA_ATTR_NO_KERNEL_MAPPING | DMA_ATTR_NO_WARN); } kfree(dev->host_mem_desc_bufs); @@ -1952,8 +1953,9 @@ out_free_bufs: while (--i >= 0) { size_t size = le32_to_cpu(descs[i].size) * dev->ctrl.page_size; - dma_free_coherent(dev->dev, size, bufs[i], - le64_to_cpu(descs[i].addr)); + dma_free_attrs(dev->dev, size, bufs[i], + le64_to_cpu(descs[i].addr), + DMA_ATTR_NO_KERNEL_MAPPING | DMA_ATTR_NO_WARN); } kfree(bufs); From 8fae268b40f5191227ae7050a99cb2cf1b914ddd Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Fri, 4 Jan 2019 15:04:33 -0700 Subject: [PATCH 162/246] nvme-pci: rerun irq setup on IO queue init errors If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch Reviewed-by: Sagi Grimberg Reviewed-by: Ming Lei Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 50 +++++++++++++++++++++++++++++------------ 1 file changed, 36 insertions(+), 14 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index efe46f518022..f891eb57f263 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -95,6 +95,7 @@ struct nvme_dev; struct nvme_queue; static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown); +static bool __nvme_disable_io_queues(struct nvme_dev *dev, u8 opcode); /* * Represents an NVM Express device. Each nvme_dev is a PCI function. @@ -1420,6 +1421,14 @@ static int nvme_suspend_queue(struct nvme_queue *nvmeq) return 0; } +static void nvme_suspend_io_queues(struct nvme_dev *dev) +{ + int i; + + for (i = dev->ctrl.queue_count - 1; i > 0; i--) + nvme_suspend_queue(&dev->queues[i]); +} + static void nvme_disable_admin_queue(struct nvme_dev *dev, bool shutdown) { struct nvme_queue *nvmeq = &dev->queues[0]; @@ -2134,6 +2143,12 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues) return result; } +static void nvme_disable_io_queues(struct nvme_dev *dev) +{ + if (__nvme_disable_io_queues(dev, nvme_admin_delete_sq)) + __nvme_disable_io_queues(dev, nvme_admin_delete_cq); +} + static int nvme_setup_io_queues(struct nvme_dev *dev) { struct nvme_queue *adminq = &dev->queues[0]; @@ -2170,6 +2185,7 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) } while (1); adminq->q_db = dev->dbs; + retry: /* Deregister the admin queue's interrupt */ pci_free_irq(pdev, 0, adminq); @@ -2187,25 +2203,34 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) result = max(result - 1, 1); dev->max_qid = result + dev->io_queues[HCTX_TYPE_POLL]; - dev_info(dev->ctrl.device, "%d/%d/%d default/read/poll queues\n", - dev->io_queues[HCTX_TYPE_DEFAULT], - dev->io_queues[HCTX_TYPE_READ], - dev->io_queues[HCTX_TYPE_POLL]); - /* * Should investigate if there's a performance win from allocating * more queues than interrupt vectors; it might allow the submission * path to scale better, even if the receive path is limited by the * number of interrupts. */ - result = queue_request_irq(adminq); if (result) { adminq->cq_vector = -1; return result; } set_bit(NVMEQ_ENABLED, &adminq->flags); - return nvme_create_io_queues(dev); + + result = nvme_create_io_queues(dev); + if (result || dev->online_queues < 2) + return result; + + if (dev->online_queues - 1 < dev->max_qid) { + nr_io_queues = dev->online_queues - 1; + nvme_disable_io_queues(dev); + nvme_suspend_io_queues(dev); + goto retry; + } + dev_info(dev->ctrl.device, "%d/%d/%d default/read/poll queues\n", + dev->io_queues[HCTX_TYPE_DEFAULT], + dev->io_queues[HCTX_TYPE_READ], + dev->io_queues[HCTX_TYPE_POLL]); + return 0; } static void nvme_del_queue_end(struct request *req, blk_status_t error) @@ -2250,7 +2275,7 @@ static int nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode) return 0; } -static bool nvme_disable_io_queues(struct nvme_dev *dev, u8 opcode) +static bool __nvme_disable_io_queues(struct nvme_dev *dev, u8 opcode) { int nr_queues = dev->online_queues - 1, sent = 0; unsigned long timeout; @@ -2411,7 +2436,6 @@ static void nvme_pci_disable(struct nvme_dev *dev) static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) { - int i; bool dead = true; struct pci_dev *pdev = to_pci_dev(dev->dev); @@ -2438,13 +2462,11 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) nvme_stop_queues(&dev->ctrl); if (!dead && dev->ctrl.queue_count > 0) { - if (nvme_disable_io_queues(dev, nvme_admin_delete_sq)) - nvme_disable_io_queues(dev, nvme_admin_delete_cq); + nvme_disable_io_queues(dev); nvme_disable_admin_queue(dev, shutdown); } - for (i = dev->ctrl.queue_count - 1; i >= 0; i--) - nvme_suspend_queue(&dev->queues[i]); - + nvme_suspend_io_queues(dev); + nvme_suspend_queue(&dev->queues[0]); nvme_pci_disable(dev); blk_mq_tagset_busy_iter(&dev->tagset, nvme_cancel_request, &dev->ctrl); From dcca1662727220d18fa351097ddff33f95f516c5 Mon Sep 17 00:00:00 2001 From: Hongbo Yao Date: Mon, 7 Jan 2019 10:22:07 +0800 Subject: [PATCH 163/246] nvme-pci: fix out of bounds access in nvme_cqe_pending There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao [hch: slight coding style update] Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index f891eb57f263..3f53a2c3042d 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1020,9 +1020,11 @@ static void nvme_complete_cqes(struct nvme_queue *nvmeq, u16 start, u16 end) static inline void nvme_update_cq_head(struct nvme_queue *nvmeq) { - if (++nvmeq->cq_head == nvmeq->q_depth) { + if (nvmeq->cq_head == nvmeq->q_depth - 1) { nvmeq->cq_head = 0; nvmeq->cq_phase = !nvmeq->cq_phase; + } else { + nvmeq->cq_head++; } } From e9c2edc098921173920df370c69b5c38fe52df56 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Mon, 31 Dec 2018 23:58:29 -0800 Subject: [PATCH 164/246] nvme-tcp: remove dead code We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index de174912445e..7210b2d6df13 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1620,7 +1620,6 @@ static void nvme_tcp_destroy_admin_queue(struct nvme_ctrl *ctrl, bool remove) { nvme_tcp_stop_queue(ctrl, 0); if (remove) { - free_opal_dev(ctrl->opal_dev); blk_cleanup_queue(ctrl->admin_q); blk_mq_free_tag_set(ctrl->admin_tagset); } From e85037a2e90ac9aa448a08927d7a7436206c6000 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Mon, 31 Dec 2018 23:58:30 -0800 Subject: [PATCH 165/246] nvme-tcp: don't ask if controller is fabrics For sure we are a fabric driver. Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/tcp.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c index 7210b2d6df13..265a0543b381 100644 --- a/drivers/nvme/host/tcp.c +++ b/drivers/nvme/host/tcp.c @@ -1565,8 +1565,7 @@ static void nvme_tcp_destroy_io_queues(struct nvme_ctrl *ctrl, bool remove) { nvme_tcp_stop_io_queues(ctrl); if (remove) { - if (ctrl->ops->flags & NVME_F_FABRICS) - blk_cleanup_queue(ctrl->connect_q); + blk_cleanup_queue(ctrl->connect_q); blk_mq_free_tag_set(ctrl->tagset); } nvme_tcp_free_io_queues(ctrl); @@ -1587,12 +1586,10 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new) goto out_free_io_queues; } - if (ctrl->ops->flags & NVME_F_FABRICS) { - ctrl->connect_q = blk_mq_init_queue(ctrl->tagset); - if (IS_ERR(ctrl->connect_q)) { - ret = PTR_ERR(ctrl->connect_q); - goto out_free_tag_set; - } + ctrl->connect_q = blk_mq_init_queue(ctrl->tagset); + if (IS_ERR(ctrl->connect_q)) { + ret = PTR_ERR(ctrl->connect_q); + goto out_free_tag_set; } } else { blk_mq_update_nr_hw_queues(ctrl->tagset, @@ -1606,7 +1603,7 @@ static int nvme_tcp_configure_io_queues(struct nvme_ctrl *ctrl, bool new) return 0; out_cleanup_connect_q: - if (new && (ctrl->ops->flags & NVME_F_FABRICS)) + if (new) blk_cleanup_queue(ctrl->connect_q); out_free_tag_set: if (new) From 9846ac0143fe9872e92fe2a1ddff868ad05bdbb6 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Mon, 7 Jan 2019 23:54:23 -0800 Subject: [PATCH 166/246] nvme-fabrics: unset write/poll queues for discovery controllers Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/fabrics.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index b2ab213f43de..3eb908c50e1a 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -874,6 +874,8 @@ static int nvmf_parse_options(struct nvmf_ctrl_options *opts, if (opts->discovery_nqn) { opts->kato = 0; opts->nr_io_queues = 0; + opts->nr_write_queues = 0; + opts->nr_poll_queues = 0; opts->duplicate_connect = true; } if (ctrl_loss_tmo < 0) From c7055fd15ff46d92eb0dd1c16a4fe010d58224c8 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Tue, 8 Jan 2019 12:46:58 +0100 Subject: [PATCH 167/246] nvme-multipath: zero out ANA log buffer When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke Signed-off-by: Christoph Hellwig --- drivers/nvme/host/multipath.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index 183ec17ba067..df4b3a6db51b 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -570,6 +570,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) return 0; out_free_ana_log_buf: kfree(ctrl->ana_log_buf); + ctrl->ana_log_buf = NULL; out: return error; } @@ -577,5 +578,6 @@ out: void nvme_mpath_uninit(struct nvme_ctrl *ctrl) { kfree(ctrl->ana_log_buf); + ctrl->ana_log_buf = NULL; } From 3da584f57133e51aeb84aaefae5e3d69531a1e4f Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 8 Jan 2019 09:37:43 -0700 Subject: [PATCH 168/246] nvme: pad fake subsys NQN vid and ssvid with zeros We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 08f2c92602f4..f81fde164d37 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2184,7 +2184,7 @@ static void nvme_init_subnqn(struct nvme_subsystem *subsys, struct nvme_ctrl *ct /* Generate a "fake" NQN per Figure 254 in NVMe 1.3 + ECN 001 */ off = snprintf(subsys->subnqn, NVMF_NQN_SIZE, - "nqn.2014.08.org.nvmexpress:%4x%4x", + "nqn.2014.08.org.nvmexpress:%04x%04x", le16_to_cpu(id->vid), le16_to_cpu(id->ssvid)); memcpy(subsys->subnqn + off, id->sn, sizeof(id->sn)); off += sizeof(id->sn); From 6299358d198a0635da2dd3c4b3ec37789e811e44 Mon Sep 17 00:00:00 2001 From: James Dingwall Date: Tue, 8 Jan 2019 10:20:51 -0700 Subject: [PATCH 169/246] nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch Signed-off-by: James Dingwall Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 16 +++++++++------- drivers/nvme/host/nvme.h | 5 +++++ drivers/nvme/host/pci.c | 2 ++ 3 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index f81fde164d37..8485be6bb895 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2173,14 +2173,16 @@ static void nvme_init_subnqn(struct nvme_subsystem *subsys, struct nvme_ctrl *ct size_t nqnlen; int off; - nqnlen = strnlen(id->subnqn, NVMF_NQN_SIZE); - if (nqnlen > 0 && nqnlen < NVMF_NQN_SIZE) { - strlcpy(subsys->subnqn, id->subnqn, NVMF_NQN_SIZE); - return; - } + if(!(ctrl->quirks & NVME_QUIRK_IGNORE_DEV_SUBNQN)) { + nqnlen = strnlen(id->subnqn, NVMF_NQN_SIZE); + if (nqnlen > 0 && nqnlen < NVMF_NQN_SIZE) { + strlcpy(subsys->subnqn, id->subnqn, NVMF_NQN_SIZE); + return; + } - if (ctrl->vs >= NVME_VS(1, 2, 1)) - dev_warn(ctrl->device, "missing or invalid SUBNQN field.\n"); + if (ctrl->vs >= NVME_VS(1, 2, 1)) + dev_warn(ctrl->device, "missing or invalid SUBNQN field.\n"); + } /* Generate a "fake" NQN per Figure 254 in NVMe 1.3 + ECN 001 */ off = snprintf(subsys->subnqn, NVMF_NQN_SIZE, diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 2b36ac922596..ab961bdeea89 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -90,6 +90,11 @@ enum nvme_quirks { * Set MEDIUM priority on SQ creation */ NVME_QUIRK_MEDIUM_PRIO_SQ = (1 << 7), + + /* + * Ignore device provided subnqn. + */ + NVME_QUIRK_IGNORE_DEV_SUBNQN = (1 << 8), }; /* diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 3f53a2c3042d..fc9d17c317b8 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2971,6 +2971,8 @@ static const struct pci_device_id nvme_id_table[] = { { PCI_VDEVICE(INTEL, 0xf1a5), /* Intel 600P/P3100 */ .driver_data = NVME_QUIRK_NO_DEEPEST_PS | NVME_QUIRK_MEDIUM_PRIO_SQ }, + { PCI_VDEVICE(INTEL, 0xf1a6), /* Intel 760p/Pro 7600p */ + .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, }, { PCI_VDEVICE(INTEL, 0x5845), /* Qemu emulated controller */ .driver_data = NVME_QUIRK_IDENTIFY_CNS, }, { PCI_DEVICE(0x1bb1, 0x0100), /* Seagate Nytro Flash Storage */ From b8a38ea64dc714a64f8fb76e311a4f15a3f67861 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 7 Jan 2019 19:08:49 -0800 Subject: [PATCH 170/246] nvme: don't initlialize ctrl->cntlid twice ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 8485be6bb895..150e49723c15 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2502,7 +2502,6 @@ int nvme_init_identify(struct nvme_ctrl *ctrl) ctrl->oaes = le32_to_cpu(id->oaes); atomic_set(&ctrl->abort_limit, id->acl + 1); ctrl->vwc = id->vwc; - ctrl->cntlid = le16_to_cpup(&id->cntlid); if (id->mdts) max_hw_sectors = 1 << (id->mdts + page_shift - 9); else From 549aff770ccfec368aa8f0652dbce8b1e8e6715a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 9 Jan 2019 16:19:24 -0300 Subject: [PATCH 171/246] perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols When testing 'perf top' on a armhf system (32-bit, Orange Pi Zero), I noticed that 'arch_cpu_idle' dominated, add it to the list of idle symbols, so that we can see what is that being done when not idle. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-4q2b5g4p2hrstrhp9t2mrlho@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 01f2c7385e38..48efad6d0f90 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -614,6 +614,7 @@ out: static bool symbol__is_idle(const char *name) { const char * const idle_symbols[] = { + "arch_cpu_idle", "cpu_idle", "cpu_startup_entry", "intel_idle", From 3e958fe67720b37d04ab8ef81b9d507a56a09bbc Mon Sep 17 00:00:00 2001 From: Tao Zhou Date: Tue, 8 Jan 2019 15:08:44 +0800 Subject: [PATCH 172/246] drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20 Fix CPDMA hang in PRT mode for both VEGA10 and VEGA20 Signed-off-by: Tao Zhou Tested-by: Yukun.Li Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 618639b8775a..59a5d8f26595 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -113,7 +113,10 @@ static const struct soc15_reg_golden golden_settings_gc_9_0[] = SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CHAN_STEER_HI, 0xffffffff, 0x4a2c0e68), SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CHAN_STEER_LO, 0xffffffff, 0xb5d3f197), SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_CACHE_INVALIDATION, 0x3fff3af3, 0x19200000), - SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_GS_MAX_WAVE_ID, 0x00000fff, 0x000003ff) + SOC15_REG_GOLDEN_VALUE(GC, 0, mmVGT_GS_MAX_WAVE_ID, 0x00000fff, 0x000003ff), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC1_F32_INT_DIS, 0x00000000, 0x00000800), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC2_F32_INT_DIS, 0x00000000, 0x00000800), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_DEBUG, 0x00000000, 0x00008000) }; static const struct soc15_reg_golden golden_settings_gc_9_0_vg10[] = @@ -135,10 +138,7 @@ static const struct soc15_reg_golden golden_settings_gc_9_0_vg10[] = SOC15_REG_GOLDEN_VALUE(GC, 0, mmRMI_UTCL1_CNTL2, 0x00030000, 0x00020000), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSPI_CONFIG_CNTL_1, 0x0000000f, 0x01000107), SOC15_REG_GOLDEN_VALUE(GC, 0, mmTD_CNTL, 0x00001800, 0x00000800), - SOC15_REG_GOLDEN_VALUE(GC, 0, mmWD_UTCL1_CNTL, 0x08000000, 0x08000080), - SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC1_F32_INT_DIS, 0x00000000, 0x00000800), - SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_MEC2_F32_INT_DIS, 0x00000000, 0x00000800), - SOC15_REG_GOLDEN_VALUE(GC, 0, mmCP_DEBUG, 0x00000000, 0x00008000) + SOC15_REG_GOLDEN_VALUE(GC, 0, mmWD_UTCL1_CNTL, 0x08000000, 0x08000080) }; static const struct soc15_reg_golden golden_settings_gc_9_0_vg20[] = From 0c6c8125582714e1fd3544983eba3d750db0f5b8 Mon Sep 17 00:00:00 2001 From: Jim Qu Date: Mon, 17 Dec 2018 17:00:50 +0800 Subject: [PATCH 173/246] drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang effect asics: VEGA10 and VEGA12 Signed-off-by: Jim Qu Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index fd0bfe140ee0..6811a5d05b27 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -78,7 +78,6 @@ static const struct soc15_reg_golden golden_settings_sdma_4[] = { SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_RLC1_RB_WPTR_POLL_CNTL, 0x0000fff0, 0x00403000), SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_PAGE, 0x000003ff, 0x000003c0), SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_UTCL1_WATERMK, 0xfc000000, 0x00000000), - SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831f07), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CLK_CTRL, 0xffffffff, 0x3f000100), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GFX_IB_CNTL, 0x800f0100, 0x00000100), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GFX_RB_WPTR_POLL_CNTL, 0x0000fff0, 0x00403000), @@ -96,6 +95,7 @@ static const struct soc15_reg_golden golden_settings_sdma_4[] = { static const struct soc15_reg_golden golden_settings_sdma_vg10[] = { SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0018773f, 0x00104002), SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002), + SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0018773f, 0x00104002), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104002) }; @@ -103,6 +103,7 @@ static const struct soc15_reg_golden golden_settings_sdma_vg10[] = { static const struct soc15_reg_golden golden_settings_sdma_vg12[] = { SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0018773f, 0x00104001), SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001), + SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0018773f, 0x00104001), SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0018773f, 0x00104001) }; From 1c1eba86339c8517814863bc7dd21e2661a84e77 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 7 Jan 2019 14:43:55 +0100 Subject: [PATCH 174/246] drm/amdgpu: disable system memory page tables for now MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We hit a problem with IOMMU with that. Disable until we have time to debug further. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index fc91f3e54a87..a0a11d399795 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -847,9 +847,6 @@ static void amdgpu_vm_bo_param(struct amdgpu_device *adev, struct amdgpu_vm *vm, bp->size = amdgpu_vm_bo_size(adev, level); bp->byte_align = AMDGPU_GPU_PAGE_SIZE; bp->domain = AMDGPU_GEM_DOMAIN_VRAM; - if (bp->size <= PAGE_SIZE && adev->asic_type >= CHIP_VEGA10 && - adev->flags & AMD_IS_APU) - bp->domain |= AMDGPU_GEM_DOMAIN_GTT; bp->domain = amdgpu_bo_get_preferred_pin_domain(adev, bp->domain); bp->flags = AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS | AMDGPU_GEM_CREATE_CPU_GTT_USWC; From 649d4968860ba708636ad643bd52b28027367042 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Wed, 9 Jan 2019 13:59:32 -0700 Subject: [PATCH 175/246] block: fix kerneldoc comment for blk_attempt_plug_merge() Commit 5f0ed774ed29 ("block: sum requests in the plug structure") removed the request_count parameter from block_attempt_plug_merge(), but did not remove the associated kerneldoc comment, introducing this warning to the docs build: ./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge' Remove the obsolete description and make things a little quieter. Signed-off-by: Jonathan Corbet Signed-off-by: Jens Axboe --- block/blk-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index f2732f106a2e..3c5f61ceeb67 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -661,7 +661,6 @@ no_merge: * blk_attempt_plug_merge - try to merge with %current's plugged list * @q: request_queue new bio is being queued at * @bio: new bio being queued - * @request_count: out parameter for number of traversed plugged requests * @same_queue_rq: pointer to &struct request that gets filled in when * another request associated with @q is found on the plug list * (optional, may be %NULL) From 27de1f541f1f911bc2242ae68ef7375247b36c7d Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Tue, 4 Dec 2018 19:25:05 +0530 Subject: [PATCH 176/246] tty/serial: Add RISC-V SBI earlycon support In RISC-V, the M-mode runtime firmware provide SBI calls for debug prints. This patch adds earlycon support using RISC-V SBI console calls. To enable it, just pass "earlycon=sbi" in kernel parameters. Signed-off-by: Anup Patel Acked-by: Greg Kroah-Hartman Reviewed-by: Palmer Dabbelt Signed-off-by: Palmer Dabbelt --- drivers/tty/serial/Kconfig | 12 +++++++++++ drivers/tty/serial/Makefile | 1 + drivers/tty/serial/earlycon-riscv-sbi.c | 28 +++++++++++++++++++++++++ 3 files changed, 41 insertions(+) create mode 100644 drivers/tty/serial/earlycon-riscv-sbi.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 67b9bf3b500e..089a6f285d5e 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -85,6 +85,18 @@ config SERIAL_EARLYCON_ARM_SEMIHOST with "earlycon=smh" on the kernel command line. The console is enabled when early_param is processed. +config SERIAL_EARLYCON_RISCV_SBI + bool "Early console using RISC-V SBI" + depends on RISCV + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON + help + Support for early debug console using RISC-V SBI. This enables + the console before standard serial driver is probed. This is enabled + with "earlycon=sbi" on the kernel command line. The console is + enabled when early_param is processed. + config SERIAL_SB1250_DUART tristate "BCM1xxx on-chip DUART serial support" depends on SIBYTE_SB1xxx_SOC=y diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 8c303736b7e8..1511e8a9f856 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o +obj-$(CONFIG_SERIAL_EARLYCON_RISCV_SBI) += earlycon-riscv-sbi.o # These Sparc drivers have to appear before others such as 8250 # which share ttySx minor node space. Otherwise console device diff --git a/drivers/tty/serial/earlycon-riscv-sbi.c b/drivers/tty/serial/earlycon-riscv-sbi.c new file mode 100644 index 000000000000..e1a551aae336 --- /dev/null +++ b/drivers/tty/serial/earlycon-riscv-sbi.c @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RISC-V SBI based earlycon + * + * Copyright (C) 2018 Anup Patel + */ +#include +#include +#include +#include +#include + +static void sbi_console_write(struct console *con, + const char *s, unsigned int n) +{ + int i; + + for (i = 0; i < n; ++i) + sbi_console_putchar(s[i]); +} + +static int __init early_sbi_setup(struct earlycon_device *device, + const char *opt) +{ + device->con->write = sbi_console_write; + return 0; +} +EARLYCON_DECLARE(sbi, early_sbi_setup); From 5db470e229e22b7eda6e23b5566e532c96fb5bc3 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 9 Jan 2019 19:17:14 -0800 Subject: [PATCH 177/246] loop: drop caches if offset or block_size are changed If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe Cc: linux-block@vger.kernel.org Reported-by: Martijn Coenen Reviewed-by: Bart Van Assche Signed-off-by: Jaegeuk Kim Signed-off-by: Jens Axboe --- drivers/block/loop.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index b8a0720d3653..cf5538942834 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1190,6 +1190,12 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) goto out_unlock; } + if (lo->lo_offset != info->lo_offset || + lo->lo_sizelimit != info->lo_sizelimit) { + sync_blockdev(lo->lo_device); + kill_bdev(lo->lo_device); + } + /* I/O need to be drained during transfer transition */ blk_mq_freeze_queue(lo->lo_queue); @@ -1218,6 +1224,14 @@ loop_set_status(struct loop_device *lo, const struct loop_info64 *info) if (lo->lo_offset != info->lo_offset || lo->lo_sizelimit != info->lo_sizelimit) { + /* kill_bdev should have truncated all the pages */ + if (lo->lo_device->bd_inode->i_mapping->nrpages) { + err = -EAGAIN; + pr_warn("%s: loop%d (%s) has still dirty pages (nrpages=%lu)\n", + __func__, lo->lo_number, lo->lo_file_name, + lo->lo_device->bd_inode->i_mapping->nrpages); + goto out_unfreeze; + } if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit)) { err = -EFBIG; goto out_unfreeze; @@ -1443,22 +1457,39 @@ static int loop_set_dio(struct loop_device *lo, unsigned long arg) static int loop_set_block_size(struct loop_device *lo, unsigned long arg) { + int err = 0; + if (lo->lo_state != Lo_bound) return -ENXIO; if (arg < 512 || arg > PAGE_SIZE || !is_power_of_2(arg)) return -EINVAL; + if (lo->lo_queue->limits.logical_block_size != arg) { + sync_blockdev(lo->lo_device); + kill_bdev(lo->lo_device); + } + blk_mq_freeze_queue(lo->lo_queue); + /* kill_bdev should have truncated all the pages */ + if (lo->lo_queue->limits.logical_block_size != arg && + lo->lo_device->bd_inode->i_mapping->nrpages) { + err = -EAGAIN; + pr_warn("%s: loop%d (%s) has still dirty pages (nrpages=%lu)\n", + __func__, lo->lo_number, lo->lo_file_name, + lo->lo_device->bd_inode->i_mapping->nrpages); + goto out_unfreeze; + } + blk_queue_logical_block_size(lo->lo_queue, arg); blk_queue_physical_block_size(lo->lo_queue, arg); blk_queue_io_min(lo->lo_queue, arg); loop_update_dio(lo); - +out_unfreeze: blk_mq_unfreeze_queue(lo->lo_queue); - return 0; + return err; } static int lo_simple_ioctl(struct loop_device *lo, unsigned int cmd, From 62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e Mon Sep 17 00:00:00 2001 From: Ivan Mironov Date: Tue, 8 Jan 2019 12:23:52 +0500 Subject: [PATCH 178/246] drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2 SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu Suggested-by: saahriktu Cc: stable@vger.kernel.org Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com --- drivers/gpu/drm/drm_fb_helper.c | 126 ++++++++++++++++++-------------- 1 file changed, 73 insertions(+), 53 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index d3af098b0922..2d7ce9d3143f 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1621,6 +1621,64 @@ static bool drm_fb_pixel_format_equal(const struct fb_var_screeninfo *var_1, var_1->transp.msb_right == var_2->transp.msb_right; } +static void drm_fb_helper_fill_pixel_fmt(struct fb_var_screeninfo *var, + u8 depth) +{ + switch (depth) { + case 8: + var->red.offset = 0; + var->green.offset = 0; + var->blue.offset = 0; + var->red.length = 8; /* 8bit DAC */ + var->green.length = 8; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + break; + case 15: + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + var->transp.offset = 15; + var->transp.length = 1; + break; + case 16: + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.offset = 0; + break; + case 24: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.offset = 0; + var->transp.length = 0; + break; + case 32: + var->red.offset = 16; + var->green.offset = 8; + var->blue.offset = 0; + var->red.length = 8; + var->green.length = 8; + var->blue.length = 8; + var->transp.offset = 24; + var->transp.length = 8; + break; + default: + break; + } +} + /** * drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var * @var: screeninfo to check @@ -1654,6 +1712,20 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, return -EINVAL; } + /* + * Workaround for SDL 1.2, which is known to be setting all pixel format + * fields values to zero in some cases. We treat this situation as a + * kind of "use some reasonable autodetected values". + */ + if (!var->red.offset && !var->green.offset && + !var->blue.offset && !var->transp.offset && + !var->red.length && !var->green.length && + !var->blue.length && !var->transp.length && + !var->red.msb_right && !var->green.msb_right && + !var->blue.msb_right && !var->transp.msb_right) { + drm_fb_helper_fill_pixel_fmt(var, fb->format->depth); + } + /* * drm fbdev emulation doesn't support changing the pixel format at all, * so reject all pixel format changing requests. @@ -1967,59 +2039,7 @@ void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helpe info->var.yoffset = 0; info->var.activate = FB_ACTIVATE_NOW; - switch (fb->format->depth) { - case 8: - info->var.red.offset = 0; - info->var.green.offset = 0; - info->var.blue.offset = 0; - info->var.red.length = 8; /* 8bit DAC */ - info->var.green.length = 8; - info->var.blue.length = 8; - info->var.transp.offset = 0; - info->var.transp.length = 0; - break; - case 15: - info->var.red.offset = 10; - info->var.green.offset = 5; - info->var.blue.offset = 0; - info->var.red.length = 5; - info->var.green.length = 5; - info->var.blue.length = 5; - info->var.transp.offset = 15; - info->var.transp.length = 1; - break; - case 16: - info->var.red.offset = 11; - info->var.green.offset = 5; - info->var.blue.offset = 0; - info->var.red.length = 5; - info->var.green.length = 6; - info->var.blue.length = 5; - info->var.transp.offset = 0; - break; - case 24: - info->var.red.offset = 16; - info->var.green.offset = 8; - info->var.blue.offset = 0; - info->var.red.length = 8; - info->var.green.length = 8; - info->var.blue.length = 8; - info->var.transp.offset = 0; - info->var.transp.length = 0; - break; - case 32: - info->var.red.offset = 16; - info->var.green.offset = 8; - info->var.blue.offset = 0; - info->var.red.length = 8; - info->var.green.length = 8; - info->var.blue.length = 8; - info->var.transp.offset = 24; - info->var.transp.length = 8; - break; - default: - break; - } + drm_fb_helper_fill_pixel_fmt(&info->var, fb->format->depth); info->var.xres = fb_width; info->var.yres = fb_height; From 66a8d5bfb518f9f12d47e1d2dce1732279f9451e Mon Sep 17 00:00:00 2001 From: Ivan Mironov Date: Tue, 8 Jan 2019 12:23:53 +0500 Subject: [PATCH 179/246] drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock Strict requirement of pixclock to be zero breaks support of SDL 1.2 which contains hardcoded table of supported video modes with non-zero pixclock values[1]. To better understand which pixclock values are considered valid and how driver should handle these values, I briefly examined few existing fbdev drivers and documentation in Documentation/fb/. And it looks like there are no strict rules on that and actual behaviour varies: * some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c); * some treat (pixclock == 0) as invalid value which leads to -EINVAL (clps711x-fb.c); * some pass converted pixclock value to hardware (uvesafb.c); * some are trying to find nearest value from predefined table (vga16fb.c, video_gx.c). Given this, I believe that it should be safe to just ignore this value if changing is not supported. It seems that any portable fbdev application which was not written only for one specific device working under one specific kernel version should not rely on any particular behaviour of pixclock anyway. However, while enabling SDL1 applications to work out of the box when there is no /etc/fb.modes with valid settings, this change affects the video mode choosing logic in SDL. Depending on current screen resolution, contents of /etc/fb.modes and resolution requested by application, this may lead to user-visible difference (not always): image will be displayed in a right way, but it will be aligned to the left instead of center. There is no "right behaviour" here as well, as emulated fbdev, opposing to old fbdev drivers, simply ignores any requsts of video mode changes with resolutions smaller than current. The easiest way to reproduce this problem is to install sdl-sopwith[2], remove /etc/fb.modes file if it exists, and then try to run sopwith from console without X. At least in Fedora 29, sopwith may be simply installed from standard repositories. [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings [2] http://sdl-sopwith.sourceforge.net/ Signed-off-by: Ivan Mironov Cc: stable@vger.kernel.org Fixes: 79e539453b34e ("DRM: i915: add mode setting support") Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware") Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)") Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com --- drivers/gpu/drm/drm_fb_helper.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 2d7ce9d3143f..d73703a695e8 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1690,9 +1690,14 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; - if (var->pixclock != 0 || in_dbg_master()) + if (in_dbg_master()) return -EINVAL; + if (var->pixclock != 0) { + DRM_DEBUG("fbdev emulation doesn't support changing the pixel clock, value of pixclock is ignored\n"); + var->pixclock = 0; + } + if ((drm_format_info_block_width(fb->format, 0) > 1) || (drm_format_info_block_height(fb->format, 0) > 1)) return -EINVAL; From cc557afb4d10cba175fd08d51c557004a229eded Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:00 +0100 Subject: [PATCH 180/246] ARM: davinci: da830-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da830-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index e52ec1619b70..c4da635ee4ce 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -208,9 +208,9 @@ static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* gpio chip 1 contains gpio range 32-63 */ - GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd", + GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp", + GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), }, }; From c3f08cceb6a59f328f1c847b002729d1584c7a32 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:01 +0100 Subject: [PATCH 181/246] ARM: davinci: da850-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-da850-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 6a29baf0a289..44bca048dfd0 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -805,9 +805,9 @@ static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { /* gpio chip 2 contains gpio range 64-95 */ - GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd", + GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp", + GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_HIGH), }, }; From 94777ed3b644a1af09843f729b2a3f25794bed0f Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:02 +0100 Subject: [PATCH 182/246] ARM: davinci: dm355-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm355-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index f53a461a606f..f7fa960c23e3 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -117,9 +117,9 @@ static struct platform_device davinci_nand_device = { static struct gpiod_lookup_table i2c_recovery_gpiod_table = { .dev_id = "i2c_davinci.1", .table = { - GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda", + GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl", + GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; From 7f1015b29d9b9eb1cd3c038d6c30d698c6d7782e Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:03 +0100 Subject: [PATCH 183/246] ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm644x-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index e1428115067f..b80c4ee76217 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -660,9 +660,9 @@ static struct i2c_board_info __initdata i2c_info[] = { static struct gpiod_lookup_table i2c_recovery_gpiod_table = { .dev_id = "i2c_davinci.1", .table = { - GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda", + GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SDA_PIN, "sda", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl", + GPIO_LOOKUP("davinci_gpio", DM644X_I2C_SCL_PIN, "scl", GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), }, }; From 054b8dc381b1c784852ad3e109270d236a58b71d Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 3 Jan 2019 16:11:04 +0100 Subject: [PATCH 184/246] ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries Since commit 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") the gpiochip label no longer has an ID suffix. Update the GPIO lookup entries. Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 8e8d51f4a276..94c4f126ef86 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -134,9 +134,9 @@ static const short hawk_mmcsd0_pins[] = { static struct gpiod_lookup_table mmc_gpios_table = { .dev_id = "da830-mmc.0", .table = { - GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd", + GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp", + GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp", GPIO_ACTIVE_LOW), }, }; From 706edaa88835e3d8de8920584ad5da76dd3d6666 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:23 +0200 Subject: [PATCH 185/246] ARM: dts: da850-evm: Correct the audio codec regulators Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-evm.dts | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index a3c9b346721d..482a54587b44 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -94,6 +94,28 @@ regulator-boot-on; }; + baseboard_3v3: fixedregulator-3v3 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + + baseboard_1v8: fixedregulator-1v8 { + /* TPS73701DCQ */ + compatible = "regulator-fixed"; + regulator-name = "baseboard_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vbat>; + regulator-always-on; + regulator-boot-on; + }; + backlight_lcd: backlight-regulator { compatible = "regulator-fixed"; regulator-name = "lcd_backlight_pwr"; @@ -210,10 +232,9 @@ /* Regulators */ IOVDD-supply = <&vdcdc2_reg>; - /* Derived from VBAT: Baseboard 3.3V / 1.8V */ - AVDD-supply = <&vbat>; - DRVDD-supply = <&vbat>; - DVDD-supply = <&vbat>; + AVDD-supply = <&baseboard_3v3>; + DRVDD-supply = <&baseboard_3v3>; + DVDD-supply = <&baseboard_1v8>; }; tca6416: gpio@20 { compatible = "ti,tca6416"; From 7fca69d4e43fa1ae9cb4f652772c132dc5a659c6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:24 +0200 Subject: [PATCH 186/246] ARM: dts: da850-evm: Correct the sound card name To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 482a54587b44..f04bc3e15332 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -127,7 +127,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "DA850/OMAP-L138 EVM"; + simple-audio-card,name = "DA850-OMAPL138 EVM"; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out"; From bd540ebe68c3017194a1caa38e075bbbc0832749 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:25 +0200 Subject: [PATCH 187/246] ARM: dts: da850-lcdk: Correct the audio codec regulators Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-lcdk.dts | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 0177e3ed20fe..c196e37606c4 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -39,6 +39,36 @@ }; }; + vcc_5vd: fixedregulator-vcc_5vd { + compatible = "regulator-fixed"; + regulator-name = "vcc_5vd"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + vcc_3v3d: fixedregulator-vcc_3v3d { + /* TPS650250 - VDCDC1 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8d: fixedregulator-vcc_1v8d { + /* TPS650250 - VDCDC2 */ + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5vd>; + regulator-always-on; + regulator-boot-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 LCDK"; @@ -221,6 +251,12 @@ compatible = "ti,tlv320aic3106"; reg = <0x18>; status = "okay"; + + /* Regulators */ + IOVDD-supply = <&vcc_3v3d>; + AVDD-supply = <&vcc_3v3d>; + DRVDD-supply = <&vcc_3v3d>; + DVDD-supply = <&vcc_1v8d>; }; }; From c25748acc5c20786ecb7518bfeae8fcef93472d6 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 19 Dec 2018 13:47:26 +0200 Subject: [PATCH 188/246] ARM: dts: da850-lcdk: Correct the sound card name To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by: Peter Ujfalusi Signed-off-by: Sekhar Nori --- arch/arm/boot/dts/da850-lcdk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index c196e37606c4..3a2fa6e035a3 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -71,7 +71,7 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "DA850/OMAP-L138 LCDK"; + simple-audio-card,name = "DA850-OMAPL138 LCDK"; simple-audio-card,widgets = "Line", "Line In", "Line", "Line Out"; From 85f5a4d666fd9be73856ed16bb36c5af5b406b29 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 8 Jan 2019 19:47:38 +0100 Subject: [PATCH 189/246] rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set There is a window between when RBD_DEV_FLAG_REMOVING is set and when the device is removed from rbd_dev_list. During this window, we set "already" and return 0. Returning 0 from write(2) can confuse userspace tools because 0 indicates that nothing was written. In particular, "rbd unmap" will retry the write multiple times a second: 10:28:05.463299 write(4, "0", 1) = 0 10:28:05.463509 write(4, "0", 1) = 0 10:28:05.463720 write(4, "0", 1) = 0 10:28:05.463942 write(4, "0", 1) = 0 10:28:05.464155 write(4, "0", 1) = 0 Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Tested-by: Dongsheng Yang --- drivers/block/rbd.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 8e5140bbf241..1e92b61d0bd5 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -5986,7 +5986,6 @@ static ssize_t do_rbd_remove(struct bus_type *bus, struct list_head *tmp; int dev_id; char opt_buf[6]; - bool already = false; bool force = false; int ret; @@ -6019,13 +6018,13 @@ static ssize_t do_rbd_remove(struct bus_type *bus, spin_lock_irq(&rbd_dev->lock); if (rbd_dev->open_count && !force) ret = -EBUSY; - else - already = test_and_set_bit(RBD_DEV_FLAG_REMOVING, - &rbd_dev->flags); + else if (test_and_set_bit(RBD_DEV_FLAG_REMOVING, + &rbd_dev->flags)) + ret = -EINPROGRESS; spin_unlock_irq(&rbd_dev->lock); } spin_unlock(&rbd_dev_list_lock); - if (ret < 0 || already) + if (ret) return ret; if (force) { From 1f7b7081568bca281f4ef42096206180cfaced00 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Thu, 10 Jan 2019 00:19:44 +0100 Subject: [PATCH 190/246] PM-runtime: Fix 'jiffies' in comments after switch to hrtimers PM-runtime now uses the hrtimers infrastructure for autosuspend, however comments still reference 'jiffies'. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Signed-off-by: Ladislav Michl Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 70624695b6d5..a282e74d1a16 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -121,7 +121,7 @@ static void pm_runtime_cancel_pending(struct device *dev) * Compute the autosuspend-delay expiration time based on the device's * power.last_busy time. If the delay has already expired or is disabled * (negative) or the power.use_autosuspend flag isn't set, return 0. - * Otherwise return the expiration time in jiffies (adjusted to be nonzero). + * Otherwise return the expiration time in nanoseconds (adjusted to be nonzero). * * This function may be called either with or without dev->power.lock held. * Either way it can be racy, since power.last_busy may be updated at any time. @@ -905,7 +905,10 @@ static enum hrtimer_restart pm_suspend_timer_fn(struct hrtimer *timer) spin_lock_irqsave(&dev->power.lock, flags); expires = dev->power.timer_expires; - /* If 'expire' is after 'jiffies' we've been called too early. */ + /* + * If 'expires' is after the current time, we've been called + * too early. + */ if (expires > 0 && expires < ktime_to_ns(ktime_get())) { dev->power.timer_expires = 0; rpm_suspend(dev, dev->power.timer_autosuspends ? From ca27e4cd0bdd87e33fda38e6e3d18d36d54356d4 Mon Sep 17 00:00:00 2001 From: Vincent Guittot Date: Thu, 10 Jan 2019 10:00:40 +0100 Subject: [PATCH 191/246] PM-runtime: Fix autosuspend_delay on 32bits arch Cast autosuspend_delay to u64 to make sure that the full computation of 'expires' or slack will be done in u64, even on 32bits arch. Otherwise, any delay greater than 2^31 nsec can overflow if signed 32bits is used when converting delay from msec to nsec. Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers) Reported-by: Tony Lindgren Tested-by: Tony Lindgren Signed-off-by: Vincent Guittot Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index a282e74d1a16..457be03b744d 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -141,7 +141,7 @@ u64 pm_runtime_autosuspend_expiration(struct device *dev) last_busy = READ_ONCE(dev->power.last_busy); - expires = last_busy + autosuspend_delay * NSEC_PER_MSEC; + expires = last_busy + (u64)autosuspend_delay * NSEC_PER_MSEC; if (expires <= now) expires = 0; /* Already expired. */ @@ -525,7 +525,7 @@ static int rpm_suspend(struct device *dev, int rpmflags) * We add a slack of 25% to gather wakeups * without sacrificing the granularity. */ - u64 slack = READ_ONCE(dev->power.autosuspend_delay) * + u64 slack = (u64)READ_ONCE(dev->power.autosuspend_delay) * (NSEC_PER_MSEC >> 2); dev->power.timer_expires = expires; From 4089e272ac61603931beb024d4d640de2cb390e0 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 10 Jan 2019 19:19:31 +0900 Subject: [PATCH 192/246] gpu/drm: Fix lock held when returning to user space. We need to call drm_modeset_acquire_fini() when drm_atomic_state_alloc() failed or call drm_modeset_acquire_init() after drm_atomic_state_alloc() succeeded. Signed-off-by: Tetsuo Handa Reported-by: syzbot Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1547115571-21219-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp --- drivers/gpu/drm/drm_atomic_uapi.c | 3 +-- drivers/gpu/drm/drm_mode_object.c | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c index c40889888a16..9a1f41adfc67 100644 --- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -1296,12 +1296,11 @@ int drm_mode_atomic_ioctl(struct drm_device *dev, (arg->flags & DRM_MODE_PAGE_FLIP_EVENT)) return -EINVAL; - drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); - state = drm_atomic_state_alloc(dev); if (!state) return -ENOMEM; + drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); state->acquire_ctx = &ctx; state->allow_modeset = !!(arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET); diff --git a/drivers/gpu/drm/drm_mode_object.c b/drivers/gpu/drm/drm_mode_object.c index cd9bc0ce9be0..004191d01772 100644 --- a/drivers/gpu/drm/drm_mode_object.c +++ b/drivers/gpu/drm/drm_mode_object.c @@ -459,11 +459,11 @@ static int set_property_atomic(struct drm_mode_object *obj, struct drm_modeset_acquire_ctx ctx; int ret; - drm_modeset_acquire_init(&ctx, 0); - state = drm_atomic_state_alloc(dev); if (!state) return -ENOMEM; + + drm_modeset_acquire_init(&ctx, 0); state->acquire_ctx = &ctx; retry: if (prop == state->dev->mode_config.dpms_property) { From ba422731316dde1e22dcc84b83c7349dc0ce1c3c Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 9 Jan 2019 16:51:17 -0800 Subject: [PATCH 193/246] mm/mmu_notifier: mm/rmap.c: Fix a mmu_notifier range bug in try_to_unmap_one MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The conversion to use a structure for mmu_notifier_invalidate_range_*() unintentionally changed the usage in try_to_unmap_one() to init the 'struct mmu_notifier_range' with vma->vm_start instead of @address, i.e. it invalidates the wrong address range. Revert to the correct address range. Manifests as KVM use-after-free WARNINGs and subsequent "BUG: Bad page state in process X" errors when reclaiming from a KVM guest due to KVM removing the wrong pages from its own mappings. Reported-by: leozinho29_eu@hotmail.com Reported-by: Mike Galbraith Reported-and-tested-by: Adam Borowski Reviewed-by: Jérôme Glisse Reviewed-by: Pankaj gupta Cc: Christian König Cc: Jan Kara Cc: Matthew Wilcox Cc: Ross Zwisler Cc: Dan Williams Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Michal Hocko Cc: Felix Kuehling Cc: Ralph Campbell Cc: John Hubbard Cc: Andrew Morton Fixes: ac46d4f3c432 ("mm/mmu_notifier: use structure for invalidate_range_start/end calls v2") Signed-off-by: Sean Christopherson Signed-off-by: Linus Torvalds --- mm/rmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/rmap.c b/mm/rmap.c index 68a1a5b869a5..0454ecc29537 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -1371,8 +1371,8 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma, * Note that the page can not be free in this function as call of * try_to_unmap() must hold a reference on the page. */ - mmu_notifier_range_init(&range, vma->vm_mm, vma->vm_start, - min(vma->vm_end, vma->vm_start + + mmu_notifier_range_init(&range, vma->vm_mm, address, + min(vma->vm_end, address + (PAGE_SIZE << compound_order(page)))); if (PageHuge(page)) { /* From d9ed41962ee202f653a5fa8d2ea0f52924abe629 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 9 Jan 2019 10:34:49 +0000 Subject: [PATCH 194/246] arm64: asm-prototypes: Fix fat-fingered typo in comment Some of the right letters, not necessarily in the right order: CONFIG_MODEVERIONS -> CONFIG_MODVERSIONS Signed-off-by: Will Deacon --- arch/arm64/include/asm/asm-prototypes.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/asm-prototypes.h b/arch/arm64/include/asm/asm-prototypes.h index 2173ad32d550..1c9a3a0c5fa5 100644 --- a/arch/arm64/include/asm/asm-prototypes.h +++ b/arch/arm64/include/asm/asm-prototypes.h @@ -2,7 +2,7 @@ #ifndef __ASM_PROTOTYPES_H #define __ASM_PROTOTYPES_H /* - * CONFIG_MODEVERIONS requires a C declaration to generate the appropriate CRC + * CONFIG_MODVERSIONS requires a C declaration to generate the appropriate CRC * for each symbol. Since commit: * * 4efca4ed05cbdfd1 ("kbuild: modversions for EXPORT_SYMBOL() for asm") From 132ac39cffbcfed80ada38ef0fc6d34d95da7be6 Mon Sep 17 00:00:00 2001 From: Heinrich Schuchardt Date: Fri, 21 Dec 2018 17:45:03 +0100 Subject: [PATCH 195/246] arm64: dts: marvell: armada-ap806: reserve PSCI area The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from Linux leads to an immediate crash. So let's make the same memory reservation as the vendor kernel. [gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 7d94c1fa592a..7f799cb5668e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -28,6 +28,23 @@ method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + ap806 { #address-cells = <2>; #size-cells = <2>; From 59c4dccbc3676144091783c8b46bd51daa4f80bc Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 12 Dec 2018 08:43:26 +0200 Subject: [PATCH 196/246] arm64: dts: marvell: mcbin: fix PCIe reset signal The MPP52 signal is on the seconds GPIO instance of CP0, which corresponds to the &cp0_gpio2 handle. Rename the property name to the standard '-gpios' suffix while at it. Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe") Signed-off-by: Baruch Siach Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 29ea7e81ec4c..329f8ceeebea 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -183,7 +183,7 @@ pinctrl-0 = <&cp0_pcie_pins>; num-lanes = <4>; num-viewport = <8>; - reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; status = "okay"; }; From b5f034845e70916fd33e172fad5ad530a29c10ab Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 8 Jan 2019 00:08:18 +0100 Subject: [PATCH 197/246] ARM: dts: kirkwood: Fix polarity of GPIO fan lines These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b1429 ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin Cc: Guenter Roeck Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Sebastian Hesselbarth Cc: Julien D'Ascenzio Reviewed-by: Andrew Lunn Tested-by: Jamie Lentin Reported-by: Julien D'Ascenzio Tested-by: Julien D'Ascenzio Signed-off-by: Linus Walleij Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-dnskw.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index cbaf06f2f78e..eb917462b219 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -36,8 +36,8 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW - &gpio1 13 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH>; gpio-fan,speed-map = <0 0 3000 1 6000 2>; From 70c25259537c073584eb906865307687275b527f Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Thu, 10 Jan 2019 20:28:39 +0800 Subject: [PATCH 198/246] csky: fixup compile error with CPU 810. This bug is from commit f553aa1c13cb ("csky: fixup relocation error with 807 & 860"). I forgot to compile with 810 for that patch. Signed-off-by: Guo Ren Cc: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/csky/kernel/module.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/csky/kernel/module.c b/arch/csky/kernel/module.c index 0b028ee3c764..b5ad7d9de18c 100644 --- a/arch/csky/kernel/module.c +++ b/arch/csky/kernel/module.c @@ -28,7 +28,7 @@ static void jsri_2_lrw_jsr(uint32_t *location) { - uint16_t location_tmp = (uint16_t *)location; + uint16_t *location_tmp = (uint16_t *)location; if (IS_BSR32(*location_tmp, *(location_tmp + 1))) return; From 1035f4a65f58407951d8d2f54c289c2b252e499c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jos=C3=A9=20Roberto=20de=20Souza?= Date: Mon, 3 Dec 2018 16:33:55 -0800 Subject: [PATCH 199/246] drm/i915: Disable PSR in Apple panels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit i915 yet don't support PSR in Apple panels, so lets keep it disabled while we work on that. v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to DP_DPCD_QUIRK_NO_PSR (Ville) v3: Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani) Fixed typo in comment of the new quirk entry(Jani) Fixes: 598c6cfe0690 (drm/i915/psr: Enable PSR1 on gen-9+ HW) Cc: Jani Nikula Cc: Ville Syrjälä Cc: Rodrigo Vivi Cc: Dhinakaran Pandiyan Reviewed-by: Dhinakaran Pandiyan Signed-off-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20181204003403.23361-1-jose.souza@intel.com (cherry picked from commit 7c5c641a930ed06ca317ee39faee7d5824266348) Signed-off-by: Jani Nikula --- drivers/gpu/drm/drm_dp_helper.c | 2 ++ drivers/gpu/drm/i915/intel_psr.c | 6 ++++++ include/drm/drm_dp_helper.h | 7 +++++++ 3 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 2d6c491a0542..516e82d0ed50 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -1273,6 +1273,8 @@ static const struct dpcd_quirk dpcd_quirk_list[] = { { OUI(0x00, 0x22, 0xb9), DEVICE_ID_ANY, true, BIT(DP_DPCD_QUIRK_CONSTANT_N) }, /* LG LP140WF6-SPM1 eDP panel */ { OUI(0x00, 0x22, 0xb9), DEVICE_ID('s', 'i', 'v', 'a', 'r', 'T'), false, BIT(DP_DPCD_QUIRK_CONSTANT_N) }, + /* Apple panels need some additional handling to support PSR */ + { OUI(0x00, 0x10, 0xfa), DEVICE_ID_ANY, false, BIT(DP_DPCD_QUIRK_NO_PSR) } }; #undef OUI diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c index 419e56342523..f71970df9936 100644 --- a/drivers/gpu/drm/i915/intel_psr.c +++ b/drivers/gpu/drm/i915/intel_psr.c @@ -274,10 +274,16 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp) DRM_DEBUG_KMS("eDP panel supports PSR version %x\n", intel_dp->psr_dpcd[0]); + if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_NO_PSR)) { + DRM_DEBUG_KMS("PSR support not currently available for this panel\n"); + return; + } + if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) { DRM_DEBUG_KMS("Panel lacks power state control, PSR cannot be enabled\n"); return; } + dev_priv->psr.sink_support = true; dev_priv->psr.sink_sync_latency = intel_dp_get_sink_sync_latency(intel_dp); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 5736c942c85b..c33e89c51d9f 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1365,6 +1365,13 @@ enum drm_dp_quirk { * to 16 bits. So will give a constant value (0x8000) for compatability. */ DP_DPCD_QUIRK_CONSTANT_N, + /** + * @DP_DPCD_QUIRK_NO_PSR + * + * The device does not support PSR even if reports that it supports or + * driver still need to implement proper handling for such device. + */ + DP_DPCD_QUIRK_NO_PSR, }; /** From 107c595c2a277be65b28762f12e1dad243e05623 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 7 Dec 2018 11:05:54 +0000 Subject: [PATCH 200/246] drm/i915: Skip the ERR_PTR error state Although commit fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture") applied cleanly after a 24 month hiatus, the code had moved on with new methods for peeking and fetching the captured gpu info. Make sure we catch all uses of the stashed error state and avoid dereferencing the error pointer. v2: Move error pointer determination into i915_gpu_capture_state v3: Restore early check to avoid capturing and then throwing away subsequent GPU error states. Fixes: fb6f0b64e455 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20181207110554.19897-1-chris@chris-wilson.co.uk (cherry picked from commit e6154e4cb8b0d3692f84ca0d66b4e1ba0389b134) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_debugfs.c | 12 +++++++++--- drivers/gpu/drm/i915/i915_gpu_error.c | 23 ++++++++++++++--------- drivers/gpu/drm/i915/i915_sysfs.c | 4 +++- 3 files changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 38dcee1ca062..40a61ef9aac1 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -984,8 +984,8 @@ static int i915_gpu_info_open(struct inode *inode, struct file *file) intel_runtime_pm_get(i915); gpu = i915_capture_gpu_state(i915); intel_runtime_pm_put(i915); - if (!gpu) - return -ENOMEM; + if (IS_ERR(gpu)) + return PTR_ERR(gpu); file->private_data = gpu; return 0; @@ -1018,7 +1018,13 @@ i915_error_state_write(struct file *filp, static int i915_error_state_open(struct inode *inode, struct file *file) { - file->private_data = i915_first_error_state(inode->i_private); + struct i915_gpu_state *error; + + error = i915_first_error_state(inode->i_private); + if (IS_ERR(error)) + return PTR_ERR(error); + + file->private_data = error; return 0; } diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c index 07465123c166..3f9ce403c755 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.c +++ b/drivers/gpu/drm/i915/i915_gpu_error.c @@ -1907,9 +1907,16 @@ i915_capture_gpu_state(struct drm_i915_private *i915) { struct i915_gpu_state *error; + /* Check if GPU capture has been disabled */ + error = READ_ONCE(i915->gpu_error.first_error); + if (IS_ERR(error)) + return error; + error = kzalloc(sizeof(*error), GFP_ATOMIC); - if (!error) - return NULL; + if (!error) { + i915_disable_error_state(i915, -ENOMEM); + return ERR_PTR(-ENOMEM); + } kref_init(&error->ref); error->i915 = i915; @@ -1945,11 +1952,8 @@ void i915_capture_error_state(struct drm_i915_private *i915, return; error = i915_capture_gpu_state(i915); - if (!error) { - DRM_DEBUG_DRIVER("out of memory, not capturing error state\n"); - i915_disable_error_state(i915, -ENOMEM); + if (IS_ERR(error)) return; - } i915_error_capture_msg(i915, error, engine_mask, error_msg); DRM_INFO("%s\n", error->error_msg); @@ -1987,7 +1991,7 @@ i915_first_error_state(struct drm_i915_private *i915) spin_lock_irq(&i915->gpu_error.lock); error = i915->gpu_error.first_error; - if (error) + if (!IS_ERR_OR_NULL(error)) i915_gpu_state_get(error); spin_unlock_irq(&i915->gpu_error.lock); @@ -2000,10 +2004,11 @@ void i915_reset_error_state(struct drm_i915_private *i915) spin_lock_irq(&i915->gpu_error.lock); error = i915->gpu_error.first_error; - i915->gpu_error.first_error = NULL; + if (error != ERR_PTR(-ENODEV)) /* if disabled, always disabled */ + i915->gpu_error.first_error = NULL; spin_unlock_irq(&i915->gpu_error.lock); - if (!IS_ERR(error)) + if (!IS_ERR_OR_NULL(error)) i915_gpu_state_put(error); } diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c index 535caebd9813..c0cfe7ae2ba5 100644 --- a/drivers/gpu/drm/i915/i915_sysfs.c +++ b/drivers/gpu/drm/i915/i915_sysfs.c @@ -521,7 +521,9 @@ static ssize_t error_state_read(struct file *filp, struct kobject *kobj, ssize_t ret; gpu = i915_first_error_state(i915); - if (gpu) { + if (IS_ERR(gpu)) { + ret = PTR_ERR(gpu); + } else if (gpu) { ret = i915_gpu_state_copy_to_buffer(gpu, buf, off, count); i915_gpu_state_put(gpu); } else { From 280d479b310298dfeb1d6f9a1617eca37beb6ce4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 22 Dec 2018 03:06:23 +0000 Subject: [PATCH 201/246] drm/i915: Unwind failure on pinning the gen7 ppgtt If we fail to pin the ggtt vma slot for the ppgtt page tables, we need to unwind the locals before reporting the error. Or else on subsequent attempts to bind the page tables into the ggtt, we will already believe that the vma has been pinned and continue on blithely. If something else should happen to be at that location, choas ensues. Fixes: a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active") Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Mika Kuoppala Cc: Matthew Auld Cc: # v4.19+ Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk (cherry picked from commit d4de753526f4d99f541f1b6ed1d963005c09700c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index add1fe7aeb93..bd17dd1f5da5 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -2075,6 +2075,7 @@ static struct i915_vma *pd_vma_create(struct gen6_hw_ppgtt *ppgtt, int size) int gen6_ppgtt_pin(struct i915_hw_ppgtt *base) { struct gen6_hw_ppgtt *ppgtt = to_gen6_ppgtt(base); + int err; /* * Workaround the limited maximum vma->pin_count and the aliasing_ppgtt @@ -2090,9 +2091,17 @@ int gen6_ppgtt_pin(struct i915_hw_ppgtt *base) * allocator works in address space sizes, so it's multiplied by page * size. We allocate at the top of the GTT to avoid fragmentation. */ - return i915_vma_pin(ppgtt->vma, - 0, GEN6_PD_ALIGN, - PIN_GLOBAL | PIN_HIGH); + err = i915_vma_pin(ppgtt->vma, + 0, GEN6_PD_ALIGN, + PIN_GLOBAL | PIN_HIGH); + if (err) + goto unpin; + + return 0; + +unpin: + ppgtt->pin_count = 0; + return err; } void gen6_ppgtt_unpin(struct i915_hw_ppgtt *base) From 70e31424eabe4923a2140eb86f704c75db6a5c87 Mon Sep 17 00:00:00 2001 From: Daniele Ceraolo Spurio Date: Wed, 9 Jan 2019 17:32:32 -0800 Subject: [PATCH 202/246] drm/i915: init per-engine WAs for all engines commit 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds") refactored the workaround code to have functions per-engine, but didn't call any of them from logical_xcs_ring_init. Since we do have a non-RCS workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call intel_engine_init_workarounds for non-RCS engines. Note that whitelist is still RCS-only. v2: move the call to logical_ring_init (Chris) Fixes: 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds") Cc: Tvrtko Ursulin Cc: Chris Wilson Signed-off-by: Daniele Ceraolo Spurio Reviewed-by: Chris Wilson Signed-off-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-2-daniele.ceraolospurio@intel.com (cherry picked from commit a60acb223fecc77531540196008ac2de89e2a162) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_lrc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 4be167dcd209..4796f40a6d4f 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -2244,6 +2244,8 @@ static int logical_ring_init(struct intel_engine_cs *engine) if (ret) return ret; + intel_engine_init_workarounds(engine); + if (HAS_LOGICAL_RING_ELSQ(i915)) { execlists->submit_reg = i915->regs + i915_mmio_reg_offset(RING_EXECLIST_SQ_CONTENTS(engine)); @@ -2310,7 +2312,6 @@ int logical_render_ring_init(struct intel_engine_cs *engine) } intel_engine_init_whitelist(engine); - intel_engine_init_workarounds(engine); return 0; } From f299e0bdbaeb60fd8829f42e53a7457cc5a6f4a2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jos=C3=A9=20Roberto=20de=20Souza?= Date: Wed, 5 Dec 2018 10:48:50 -0800 Subject: [PATCH 203/246] drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DP_DPCD_QUIRK_NO_PSR comment is missing colon causing this warning when generating kernel documentation. ./include/drm/drm_dp_helper.h:1374: warning: Incorrect use of kernel-doc format: * @DP_DPCD_QUIRK_NO_PSR Fixes: 1035f4a65f58 ("drm/i915: Disable PSR in Apple panels") Cc: Dhinakaran Pandiyan Signed-off-by: José Roberto de Souza Reviewed-by: Dhinakaran Pandiyan Link: https://patchwork.freedesktop.org/patch/msgid/20181205184850.13218-1-jose.souza@intel.com (cherry picked from commit ed17b555303c74a35f226268523b1695dbd4617d) Signed-off-by: Jani Nikula --- include/drm/drm_dp_helper.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index c33e89c51d9f..2d4fc2d33810 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1366,7 +1366,7 @@ enum drm_dp_quirk { */ DP_DPCD_QUIRK_CONSTANT_N, /** - * @DP_DPCD_QUIRK_NO_PSR + * @DP_DPCD_QUIRK_NO_PSR: * * The device does not support PSR even if reports that it supports or * driver still need to implement proper handling for such device. From 0206131811fa6e4b3ed64b5f1c107e2815dcab42 Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Thu, 10 Jan 2019 15:19:35 +0530 Subject: [PATCH 204/246] perf powerpc: Rework syscall table generation Commit aff850393200 ("powerpc: add system call table generation support") changed how systemcall table is generated for powerpc. Incorporate these changes into perf as well. Committer testing: $ podman run --entrypoint=/bin/sh --privileged -v /home/acme/git:/git --rm -ti docker.io/acmel/linux-perf-tools-build-ubuntu:18.04-x-powerpc64 perfbuilder@d7a7af166a80:/git/perf$ head -2 /etc/os-release NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" perfbuilder@d7a7af166a80:/git/perf$ perfbuilder@d7a7af166a80:/git/perf$ make ARCH=powerpc CROSS_COMPILE=powerpc64-linux-gnu- EXTRA_CFLAGS= -C /git/linux/tools/perf O=/tmp/build/perf make: Entering directory '/git/linux/tools/perf' BUILD: Doing 'make -j8' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h' diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h sh: 1: command: Illegal option -c Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ on ] Makefile.config:445: No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev Makefile.config:491: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Makefile.config:583: No libcrypto.h found, disables jitted code injection, please install libssl-devel or libssl-dev Makefile.config:598: slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev Makefile.config:612: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev Makefile.config:639: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev Makefile.config:666: No python interpreter was found: disables Python support - please install python-devel/python-dev Makefile.config:721: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling Makefile.config:750: No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev Makefile.config:763: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev Makefile.config:814: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev Makefile.config:840: No alternatives command found, you need to set JDIR= to point to the root of your Java directory GEN /tmp/build/perf/common-cmds.h CC /tmp/build/perf/util/syscalltbl.o LD /tmp/build/perf/libperf-in.o AR /tmp/build/perf/libperf.a LINK /tmp/build/perf/perf make: Leaving directory '/git/linux/tools/perf' perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c static const char *syscalltbl_powerpc_64[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_64.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_64_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ head /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c static const char *syscalltbl_powerpc_32[] = { [0] = "restart_syscall", [1] = "exit", [2] = "fork", [3] = "read", [4] = "write", [5] = "open", [6] = "close", [7] = "waitpid", [8] = "creat", perfbuilder@d7a7af166a80:/git/perf$ tail /tmp/build/perf/arch/powerpc/include/generated/asm/syscalls_32.c [381] = "pwritev2", [382] = "kexec_file_load", [383] = "statx", [384] = "pkey_alloc", [385] = "pkey_free", [386] = "pkey_mprotect", [387] = "rseq", [388] = "io_pgetevents", }; #define SYSCALLTBL_POWERPC_32_MAX_ID 388 perfbuilder@d7a7af166a80:/git/perf$ Signed-off-by: Ravi Bangoria Reported-by: Arnaldo Carvalho de Melo Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Michael Ellerman Cc: Namhyung Kim Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-1-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/powerpc/Makefile | 15 +- .../arch/powerpc/entry/syscalls/mksyscalltbl | 22 +- .../arch/powerpc/entry/syscalls/syscall.tbl | 427 ++++++++++++++++++ 3 files changed, 450 insertions(+), 14 deletions(-) create mode 100644 tools/perf/arch/powerpc/entry/syscalls/syscall.tbl diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile index a111239df182..e58d00d62f02 100644 --- a/tools/perf/arch/powerpc/Makefile +++ b/tools/perf/arch/powerpc/Makefile @@ -14,18 +14,25 @@ PERF_HAVE_JITDUMP := 1 out := $(OUTPUT)arch/powerpc/include/generated/asm header32 := $(out)/syscalls_32.c header64 := $(out)/syscalls_64.c -sysdef := $(srctree)/tools/arch/powerpc/include/uapi/asm/unistd.h -sysprf := $(srctree)/tools/perf/arch/powerpc/entry/syscalls/ +syskrn := $(srctree)/arch/powerpc/kernel/syscalls/syscall.tbl +sysprf := $(srctree)/tools/perf/arch/powerpc/entry/syscalls +sysdef := $(sysprf)/syscall.tbl systbl := $(sysprf)/mksyscalltbl # Create output directory if not already present _dummy := $(shell [ -d '$(out)' ] || mkdir -p '$(out)') $(header64): $(sysdef) $(systbl) - $(Q)$(SHELL) '$(systbl)' '64' '$(CC)' $(sysdef) > $@ + @(test -d ../../kernel -a -d ../../tools -a -d ../perf && ( \ + (diff -B $(sysdef) $(syskrn) >/dev/null) \ + || echo "Warning: Kernel ABI header at '$(sysdef)' differs from latest version at '$(syskrn)'" >&2 )) || true + $(Q)$(SHELL) '$(systbl)' '64' $(sysdef) > $@ $(header32): $(sysdef) $(systbl) - $(Q)$(SHELL) '$(systbl)' '32' '$(CC)' $(sysdef) > $@ + @(test -d ../../kernel -a -d ../../tools -a -d ../perf && ( \ + (diff -B $(sysdef) $(syskrn) >/dev/null) \ + || echo "Warning: Kernel ABI header at '$(sysdef)' differs from latest version at '$(syskrn)'" >&2 )) || true + $(Q)$(SHELL) '$(systbl)' '32' $(sysdef) > $@ clean:: $(call QUIET_CLEAN, powerpc) $(RM) $(header32) $(header64) diff --git a/tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl b/tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl index ef52e1dd694b..6c58060aa03b 100755 --- a/tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl +++ b/tools/perf/arch/powerpc/entry/syscalls/mksyscalltbl @@ -9,10 +9,9 @@ # Changed by: Ravi Bangoria wordsize=$1 -gcc=$2 -input=$3 +SYSCALL_TBL=$2 -if ! test -r $input; then +if ! test -r $SYSCALL_TBL; then echo "Could not read input file" >&2 exit 1 fi @@ -20,18 +19,21 @@ fi create_table() { local wordsize=$1 - local max_nr + local max_nr nr abi sc discard + max_nr=-1 + nr=0 echo "static const char *syscalltbl_powerpc_${wordsize}[] = {" - while read sc nr; do - printf '\t[%d] = "%s",\n' $nr $sc - max_nr=$nr + while read nr abi sc discard; do + if [ "$max_nr" -lt "$nr" ]; then + printf '\t[%d] = "%s",\n' $nr $sc + max_nr=$nr + fi done echo '};' echo "#define SYSCALLTBL_POWERPC_${wordsize}_MAX_ID $max_nr" } -$gcc -m${wordsize} -E -dM -x c $input \ - |sed -ne 's/^#define __NR_//p' \ - |sort -t' ' -k2 -nu \ +grep -E "^[[:digit:]]+[[:space:]]+(common|spu|nospu|${wordsize})" $SYSCALL_TBL \ + |sort -k1 -n \ |create_table ${wordsize} diff --git a/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl new file mode 100644 index 000000000000..db3bbb8744af --- /dev/null +++ b/tools/perf/arch/powerpc/entry/syscalls/syscall.tbl @@ -0,0 +1,427 @@ +# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note +# +# system call numbers and entry vectors for powerpc +# +# The format is: +# +# +# The can be common, spu, nospu, 64, or 32 for this file. +# +0 nospu restart_syscall sys_restart_syscall +1 nospu exit sys_exit +2 nospu fork ppc_fork +3 common read sys_read +4 common write sys_write +5 common open sys_open compat_sys_open +6 common close sys_close +7 common waitpid sys_waitpid +8 common creat sys_creat +9 common link sys_link +10 common unlink sys_unlink +11 nospu execve sys_execve compat_sys_execve +12 common chdir sys_chdir +13 common time sys_time compat_sys_time +14 common mknod sys_mknod +15 common chmod sys_chmod +16 common lchown sys_lchown +17 common break sys_ni_syscall +18 32 oldstat sys_stat sys_ni_syscall +18 64 oldstat sys_ni_syscall +18 spu oldstat sys_ni_syscall +19 common lseek sys_lseek compat_sys_lseek +20 common getpid sys_getpid +21 nospu mount sys_mount compat_sys_mount +22 32 umount sys_oldumount +22 64 umount sys_ni_syscall +22 spu umount sys_ni_syscall +23 common setuid sys_setuid +24 common getuid sys_getuid +25 common stime sys_stime compat_sys_stime +26 nospu ptrace sys_ptrace compat_sys_ptrace +27 common alarm sys_alarm +28 32 oldfstat sys_fstat sys_ni_syscall +28 64 oldfstat sys_ni_syscall +28 spu oldfstat sys_ni_syscall +29 nospu pause sys_pause +30 nospu utime sys_utime compat_sys_utime +31 common stty sys_ni_syscall +32 common gtty sys_ni_syscall +33 common access sys_access +34 common nice sys_nice +35 common ftime sys_ni_syscall +36 common sync sys_sync +37 common kill sys_kill +38 common rename sys_rename +39 common mkdir sys_mkdir +40 common rmdir sys_rmdir +41 common dup sys_dup +42 common pipe sys_pipe +43 common times sys_times compat_sys_times +44 common prof sys_ni_syscall +45 common brk sys_brk +46 common setgid sys_setgid +47 common getgid sys_getgid +48 nospu signal sys_signal +49 common geteuid sys_geteuid +50 common getegid sys_getegid +51 nospu acct sys_acct +52 nospu umount2 sys_umount +53 common lock sys_ni_syscall +54 common ioctl sys_ioctl compat_sys_ioctl +55 common fcntl sys_fcntl compat_sys_fcntl +56 common mpx sys_ni_syscall +57 common setpgid sys_setpgid +58 common ulimit sys_ni_syscall +59 32 oldolduname sys_olduname +59 64 oldolduname sys_ni_syscall +59 spu oldolduname sys_ni_syscall +60 common umask sys_umask +61 common chroot sys_chroot +62 nospu ustat sys_ustat compat_sys_ustat +63 common dup2 sys_dup2 +64 common getppid sys_getppid +65 common getpgrp sys_getpgrp +66 common setsid sys_setsid +67 32 sigaction sys_sigaction compat_sys_sigaction +67 64 sigaction sys_ni_syscall +67 spu sigaction sys_ni_syscall +68 common sgetmask sys_sgetmask +69 common ssetmask sys_ssetmask +70 common setreuid sys_setreuid +71 common setregid sys_setregid +72 32 sigsuspend sys_sigsuspend +72 64 sigsuspend sys_ni_syscall +72 spu sigsuspend sys_ni_syscall +73 32 sigpending sys_sigpending compat_sys_sigpending +73 64 sigpending sys_ni_syscall +73 spu sigpending sys_ni_syscall +74 common sethostname sys_sethostname +75 common setrlimit sys_setrlimit compat_sys_setrlimit +76 32 getrlimit sys_old_getrlimit compat_sys_old_getrlimit +76 64 getrlimit sys_ni_syscall +76 spu getrlimit sys_ni_syscall +77 common getrusage sys_getrusage compat_sys_getrusage +78 common gettimeofday sys_gettimeofday compat_sys_gettimeofday +79 common settimeofday sys_settimeofday compat_sys_settimeofday +80 common getgroups sys_getgroups +81 common setgroups sys_setgroups +82 32 select ppc_select sys_ni_syscall +82 64 select sys_ni_syscall +82 spu select sys_ni_syscall +83 common symlink sys_symlink +84 32 oldlstat sys_lstat sys_ni_syscall +84 64 oldlstat sys_ni_syscall +84 spu oldlstat sys_ni_syscall +85 common readlink sys_readlink +86 nospu uselib sys_uselib +87 nospu swapon sys_swapon +88 nospu reboot sys_reboot +89 32 readdir sys_old_readdir compat_sys_old_readdir +89 64 readdir sys_ni_syscall +89 spu readdir sys_ni_syscall +90 common mmap sys_mmap +91 common munmap sys_munmap +92 common truncate sys_truncate compat_sys_truncate +93 common ftruncate sys_ftruncate compat_sys_ftruncate +94 common fchmod sys_fchmod +95 common fchown sys_fchown +96 common getpriority sys_getpriority +97 common setpriority sys_setpriority +98 common profil sys_ni_syscall +99 nospu statfs sys_statfs compat_sys_statfs +100 nospu fstatfs sys_fstatfs compat_sys_fstatfs +101 common ioperm sys_ni_syscall +102 common socketcall sys_socketcall compat_sys_socketcall +103 common syslog sys_syslog +104 common setitimer sys_setitimer compat_sys_setitimer +105 common getitimer sys_getitimer compat_sys_getitimer +106 common stat sys_newstat compat_sys_newstat +107 common lstat sys_newlstat compat_sys_newlstat +108 common fstat sys_newfstat compat_sys_newfstat +109 32 olduname sys_uname +109 64 olduname sys_ni_syscall +109 spu olduname sys_ni_syscall +110 common iopl sys_ni_syscall +111 common vhangup sys_vhangup +112 common idle sys_ni_syscall +113 common vm86 sys_ni_syscall +114 common wait4 sys_wait4 compat_sys_wait4 +115 nospu swapoff sys_swapoff +116 common sysinfo sys_sysinfo compat_sys_sysinfo +117 nospu ipc sys_ipc compat_sys_ipc +118 common fsync sys_fsync +119 32 sigreturn sys_sigreturn compat_sys_sigreturn +119 64 sigreturn sys_ni_syscall +119 spu sigreturn sys_ni_syscall +120 nospu clone ppc_clone +121 common setdomainname sys_setdomainname +122 common uname sys_newuname +123 common modify_ldt sys_ni_syscall +124 common adjtimex sys_adjtimex compat_sys_adjtimex +125 common mprotect sys_mprotect +126 32 sigprocmask sys_sigprocmask compat_sys_sigprocmask +126 64 sigprocmask sys_ni_syscall +126 spu sigprocmask sys_ni_syscall +127 common create_module sys_ni_syscall +128 nospu init_module sys_init_module +129 nospu delete_module sys_delete_module +130 common get_kernel_syms sys_ni_syscall +131 nospu quotactl sys_quotactl +132 common getpgid sys_getpgid +133 common fchdir sys_fchdir +134 common bdflush sys_bdflush +135 common sysfs sys_sysfs +136 32 personality sys_personality ppc64_personality +136 64 personality ppc64_personality +136 spu personality ppc64_personality +137 common afs_syscall sys_ni_syscall +138 common setfsuid sys_setfsuid +139 common setfsgid sys_setfsgid +140 common _llseek sys_llseek +141 common getdents sys_getdents compat_sys_getdents +142 common _newselect sys_select compat_sys_select +143 common flock sys_flock +144 common msync sys_msync +145 common readv sys_readv compat_sys_readv +146 common writev sys_writev compat_sys_writev +147 common getsid sys_getsid +148 common fdatasync sys_fdatasync +149 nospu _sysctl sys_sysctl compat_sys_sysctl +150 common mlock sys_mlock +151 common munlock sys_munlock +152 common mlockall sys_mlockall +153 common munlockall sys_munlockall +154 common sched_setparam sys_sched_setparam +155 common sched_getparam sys_sched_getparam +156 common sched_setscheduler sys_sched_setscheduler +157 common sched_getscheduler sys_sched_getscheduler +158 common sched_yield sys_sched_yield +159 common sched_get_priority_max sys_sched_get_priority_max +160 common sched_get_priority_min sys_sched_get_priority_min +161 common sched_rr_get_interval sys_sched_rr_get_interval compat_sys_sched_rr_get_interval +162 common nanosleep sys_nanosleep compat_sys_nanosleep +163 common mremap sys_mremap +164 common setresuid sys_setresuid +165 common getresuid sys_getresuid +166 common query_module sys_ni_syscall +167 common poll sys_poll +168 common nfsservctl sys_ni_syscall +169 common setresgid sys_setresgid +170 common getresgid sys_getresgid +171 common prctl sys_prctl +172 nospu rt_sigreturn sys_rt_sigreturn compat_sys_rt_sigreturn +173 nospu rt_sigaction sys_rt_sigaction compat_sys_rt_sigaction +174 nospu rt_sigprocmask sys_rt_sigprocmask compat_sys_rt_sigprocmask +175 nospu rt_sigpending sys_rt_sigpending compat_sys_rt_sigpending +176 nospu rt_sigtimedwait sys_rt_sigtimedwait compat_sys_rt_sigtimedwait +177 nospu rt_sigqueueinfo sys_rt_sigqueueinfo compat_sys_rt_sigqueueinfo +178 nospu rt_sigsuspend sys_rt_sigsuspend compat_sys_rt_sigsuspend +179 common pread64 sys_pread64 compat_sys_pread64 +180 common pwrite64 sys_pwrite64 compat_sys_pwrite64 +181 common chown sys_chown +182 common getcwd sys_getcwd +183 common capget sys_capget +184 common capset sys_capset +185 nospu sigaltstack sys_sigaltstack compat_sys_sigaltstack +186 32 sendfile sys_sendfile compat_sys_sendfile +186 64 sendfile sys_sendfile64 +186 spu sendfile sys_sendfile64 +187 common getpmsg sys_ni_syscall +188 common putpmsg sys_ni_syscall +189 nospu vfork ppc_vfork +190 common ugetrlimit sys_getrlimit compat_sys_getrlimit +191 common readahead sys_readahead compat_sys_readahead +192 32 mmap2 sys_mmap2 compat_sys_mmap2 +193 32 truncate64 sys_truncate64 compat_sys_truncate64 +194 32 ftruncate64 sys_ftruncate64 compat_sys_ftruncate64 +195 32 stat64 sys_stat64 +196 32 lstat64 sys_lstat64 +197 32 fstat64 sys_fstat64 +198 nospu pciconfig_read sys_pciconfig_read +199 nospu pciconfig_write sys_pciconfig_write +200 nospu pciconfig_iobase sys_pciconfig_iobase +201 common multiplexer sys_ni_syscall +202 common getdents64 sys_getdents64 +203 common pivot_root sys_pivot_root +204 32 fcntl64 sys_fcntl64 compat_sys_fcntl64 +205 common madvise sys_madvise +206 common mincore sys_mincore +207 common gettid sys_gettid +208 common tkill sys_tkill +209 common setxattr sys_setxattr +210 common lsetxattr sys_lsetxattr +211 common fsetxattr sys_fsetxattr +212 common getxattr sys_getxattr +213 common lgetxattr sys_lgetxattr +214 common fgetxattr sys_fgetxattr +215 common listxattr sys_listxattr +216 common llistxattr sys_llistxattr +217 common flistxattr sys_flistxattr +218 common removexattr sys_removexattr +219 common lremovexattr sys_lremovexattr +220 common fremovexattr sys_fremovexattr +221 common futex sys_futex compat_sys_futex +222 common sched_setaffinity sys_sched_setaffinity compat_sys_sched_setaffinity +223 common sched_getaffinity sys_sched_getaffinity compat_sys_sched_getaffinity +# 224 unused +225 common tuxcall sys_ni_syscall +226 32 sendfile64 sys_sendfile64 compat_sys_sendfile64 +227 common io_setup sys_io_setup compat_sys_io_setup +228 common io_destroy sys_io_destroy +229 common io_getevents sys_io_getevents compat_sys_io_getevents +230 common io_submit sys_io_submit compat_sys_io_submit +231 common io_cancel sys_io_cancel +232 nospu set_tid_address sys_set_tid_address +233 common fadvise64 sys_fadvise64 ppc32_fadvise64 +234 nospu exit_group sys_exit_group +235 nospu lookup_dcookie sys_lookup_dcookie compat_sys_lookup_dcookie +236 common epoll_create sys_epoll_create +237 common epoll_ctl sys_epoll_ctl +238 common epoll_wait sys_epoll_wait +239 common remap_file_pages sys_remap_file_pages +240 common timer_create sys_timer_create compat_sys_timer_create +241 common timer_settime sys_timer_settime compat_sys_timer_settime +242 common timer_gettime sys_timer_gettime compat_sys_timer_gettime +243 common timer_getoverrun sys_timer_getoverrun +244 common timer_delete sys_timer_delete +245 common clock_settime sys_clock_settime compat_sys_clock_settime +246 common clock_gettime sys_clock_gettime compat_sys_clock_gettime +247 common clock_getres sys_clock_getres compat_sys_clock_getres +248 common clock_nanosleep sys_clock_nanosleep compat_sys_clock_nanosleep +249 32 swapcontext ppc_swapcontext ppc32_swapcontext +249 64 swapcontext ppc64_swapcontext +249 spu swapcontext sys_ni_syscall +250 common tgkill sys_tgkill +251 common utimes sys_utimes compat_sys_utimes +252 common statfs64 sys_statfs64 compat_sys_statfs64 +253 common fstatfs64 sys_fstatfs64 compat_sys_fstatfs64 +254 32 fadvise64_64 ppc_fadvise64_64 +254 spu fadvise64_64 sys_ni_syscall +255 common rtas sys_rtas +256 32 sys_debug_setcontext sys_debug_setcontext sys_ni_syscall +256 64 sys_debug_setcontext sys_ni_syscall +256 spu sys_debug_setcontext sys_ni_syscall +# 257 reserved for vserver +258 nospu migrate_pages sys_migrate_pages compat_sys_migrate_pages +259 nospu mbind sys_mbind compat_sys_mbind +260 nospu get_mempolicy sys_get_mempolicy compat_sys_get_mempolicy +261 nospu set_mempolicy sys_set_mempolicy compat_sys_set_mempolicy +262 nospu mq_open sys_mq_open compat_sys_mq_open +263 nospu mq_unlink sys_mq_unlink +264 nospu mq_timedsend sys_mq_timedsend compat_sys_mq_timedsend +265 nospu mq_timedreceive sys_mq_timedreceive compat_sys_mq_timedreceive +266 nospu mq_notify sys_mq_notify compat_sys_mq_notify +267 nospu mq_getsetattr sys_mq_getsetattr compat_sys_mq_getsetattr +268 nospu kexec_load sys_kexec_load compat_sys_kexec_load +269 nospu add_key sys_add_key +270 nospu request_key sys_request_key +271 nospu keyctl sys_keyctl compat_sys_keyctl +272 nospu waitid sys_waitid compat_sys_waitid +273 nospu ioprio_set sys_ioprio_set +274 nospu ioprio_get sys_ioprio_get +275 nospu inotify_init sys_inotify_init +276 nospu inotify_add_watch sys_inotify_add_watch +277 nospu inotify_rm_watch sys_inotify_rm_watch +278 nospu spu_run sys_spu_run +279 nospu spu_create sys_spu_create +280 nospu pselect6 sys_pselect6 compat_sys_pselect6 +281 nospu ppoll sys_ppoll compat_sys_ppoll +282 common unshare sys_unshare +283 common splice sys_splice +284 common tee sys_tee +285 common vmsplice sys_vmsplice compat_sys_vmsplice +286 common openat sys_openat compat_sys_openat +287 common mkdirat sys_mkdirat +288 common mknodat sys_mknodat +289 common fchownat sys_fchownat +290 common futimesat sys_futimesat compat_sys_futimesat +291 32 fstatat64 sys_fstatat64 +291 64 newfstatat sys_newfstatat +291 spu newfstatat sys_newfstatat +292 common unlinkat sys_unlinkat +293 common renameat sys_renameat +294 common linkat sys_linkat +295 common symlinkat sys_symlinkat +296 common readlinkat sys_readlinkat +297 common fchmodat sys_fchmodat +298 common faccessat sys_faccessat +299 common get_robust_list sys_get_robust_list compat_sys_get_robust_list +300 common set_robust_list sys_set_robust_list compat_sys_set_robust_list +301 common move_pages sys_move_pages compat_sys_move_pages +302 common getcpu sys_getcpu +303 nospu epoll_pwait sys_epoll_pwait compat_sys_epoll_pwait +304 common utimensat sys_utimensat compat_sys_utimensat +305 common signalfd sys_signalfd compat_sys_signalfd +306 common timerfd_create sys_timerfd_create +307 common eventfd sys_eventfd +308 common sync_file_range2 sys_sync_file_range2 compat_sys_sync_file_range2 +309 nospu fallocate sys_fallocate compat_sys_fallocate +310 nospu subpage_prot sys_subpage_prot +311 common timerfd_settime sys_timerfd_settime compat_sys_timerfd_settime +312 common timerfd_gettime sys_timerfd_gettime compat_sys_timerfd_gettime +313 common signalfd4 sys_signalfd4 compat_sys_signalfd4 +314 common eventfd2 sys_eventfd2 +315 common epoll_create1 sys_epoll_create1 +316 common dup3 sys_dup3 +317 common pipe2 sys_pipe2 +318 nospu inotify_init1 sys_inotify_init1 +319 common perf_event_open sys_perf_event_open +320 common preadv sys_preadv compat_sys_preadv +321 common pwritev sys_pwritev compat_sys_pwritev +322 nospu rt_tgsigqueueinfo sys_rt_tgsigqueueinfo compat_sys_rt_tgsigqueueinfo +323 nospu fanotify_init sys_fanotify_init +324 nospu fanotify_mark sys_fanotify_mark compat_sys_fanotify_mark +325 common prlimit64 sys_prlimit64 +326 common socket sys_socket +327 common bind sys_bind +328 common connect sys_connect +329 common listen sys_listen +330 common accept sys_accept +331 common getsockname sys_getsockname +332 common getpeername sys_getpeername +333 common socketpair sys_socketpair +334 common send sys_send +335 common sendto sys_sendto +336 common recv sys_recv compat_sys_recv +337 common recvfrom sys_recvfrom compat_sys_recvfrom +338 common shutdown sys_shutdown +339 common setsockopt sys_setsockopt compat_sys_setsockopt +340 common getsockopt sys_getsockopt compat_sys_getsockopt +341 common sendmsg sys_sendmsg compat_sys_sendmsg +342 common recvmsg sys_recvmsg compat_sys_recvmsg +343 common recvmmsg sys_recvmmsg compat_sys_recvmmsg +344 common accept4 sys_accept4 +345 common name_to_handle_at sys_name_to_handle_at +346 common open_by_handle_at sys_open_by_handle_at compat_sys_open_by_handle_at +347 common clock_adjtime sys_clock_adjtime compat_sys_clock_adjtime +348 common syncfs sys_syncfs +349 common sendmmsg sys_sendmmsg compat_sys_sendmmsg +350 common setns sys_setns +351 nospu process_vm_readv sys_process_vm_readv compat_sys_process_vm_readv +352 nospu process_vm_writev sys_process_vm_writev compat_sys_process_vm_writev +353 nospu finit_module sys_finit_module +354 nospu kcmp sys_kcmp +355 common sched_setattr sys_sched_setattr +356 common sched_getattr sys_sched_getattr +357 common renameat2 sys_renameat2 +358 common seccomp sys_seccomp +359 common getrandom sys_getrandom +360 common memfd_create sys_memfd_create +361 common bpf sys_bpf +362 nospu execveat sys_execveat compat_sys_execveat +363 32 switch_endian sys_ni_syscall +363 64 switch_endian ppc_switch_endian +363 spu switch_endian sys_ni_syscall +364 common userfaultfd sys_userfaultfd +365 common membarrier sys_membarrier +378 nospu mlock2 sys_mlock2 +379 nospu copy_file_range sys_copy_file_range +380 common preadv2 sys_preadv2 compat_sys_preadv2 +381 common pwritev2 sys_pwritev2 compat_sys_pwritev2 +382 nospu kexec_file_load sys_kexec_file_load +383 nospu statx sys_statx +384 nospu pkey_alloc sys_pkey_alloc +385 nospu pkey_free sys_pkey_free +386 nospu pkey_mprotect sys_pkey_mprotect +387 nospu rseq sys_rseq +388 nospu io_pgetevents sys_io_pgetevents compat_sys_io_pgetevents From 15c03092a9fbcdd041f58e5f832bf76c21c42e6a Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Thu, 10 Jan 2019 15:19:36 +0530 Subject: [PATCH 205/246] tools headers powerpc: Remove unistd.h We use syscall.tbl to generate system call table on powerpc. The unistd.h copy is no longer required now. Remove it. Signed-off-by: Ravi Bangoria Cc: Jiri Olsa Cc: Michael Ellerman Cc: Namhyung Kim Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20190110094936.3132-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/powerpc/include/uapi/asm/unistd.h | 404 ------------------- tools/perf/check-headers.sh | 1 - 2 files changed, 405 deletions(-) delete mode 100644 tools/arch/powerpc/include/uapi/asm/unistd.h diff --git a/tools/arch/powerpc/include/uapi/asm/unistd.h b/tools/arch/powerpc/include/uapi/asm/unistd.h deleted file mode 100644 index 985534d0b448..000000000000 --- a/tools/arch/powerpc/include/uapi/asm/unistd.h +++ /dev/null @@ -1,404 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* - * This file contains the system call numbers. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _UAPI_ASM_POWERPC_UNISTD_H_ -#define _UAPI_ASM_POWERPC_UNISTD_H_ - - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_oldolduname 59 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_vm86 113 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_query_module 166 -#define __NR_poll 167 -#define __NR_nfsservctl 168 -#define __NR_setresgid 169 -#define __NR_getresgid 170 -#define __NR_prctl 171 -#define __NR_rt_sigreturn 172 -#define __NR_rt_sigaction 173 -#define __NR_rt_sigprocmask 174 -#define __NR_rt_sigpending 175 -#define __NR_rt_sigtimedwait 176 -#define __NR_rt_sigqueueinfo 177 -#define __NR_rt_sigsuspend 178 -#define __NR_pread64 179 -#define __NR_pwrite64 180 -#define __NR_chown 181 -#define __NR_getcwd 182 -#define __NR_capget 183 -#define __NR_capset 184 -#define __NR_sigaltstack 185 -#define __NR_sendfile 186 -#define __NR_getpmsg 187 /* some people actually want streams */ -#define __NR_putpmsg 188 /* some people actually want streams */ -#define __NR_vfork 189 -#define __NR_ugetrlimit 190 /* SuS compliant getrlimit */ -#define __NR_readahead 191 -#ifndef __powerpc64__ /* these are 32-bit only */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#endif -#define __NR_pciconfig_read 198 -#define __NR_pciconfig_write 199 -#define __NR_pciconfig_iobase 200 -#define __NR_multiplexer 201 -#define __NR_getdents64 202 -#define __NR_pivot_root 203 -#ifndef __powerpc64__ -#define __NR_fcntl64 204 -#endif -#define __NR_madvise 205 -#define __NR_mincore 206 -#define __NR_gettid 207 -#define __NR_tkill 208 -#define __NR_setxattr 209 -#define __NR_lsetxattr 210 -#define __NR_fsetxattr 211 -#define __NR_getxattr 212 -#define __NR_lgetxattr 213 -#define __NR_fgetxattr 214 -#define __NR_listxattr 215 -#define __NR_llistxattr 216 -#define __NR_flistxattr 217 -#define __NR_removexattr 218 -#define __NR_lremovexattr 219 -#define __NR_fremovexattr 220 -#define __NR_futex 221 -#define __NR_sched_setaffinity 222 -#define __NR_sched_getaffinity 223 -/* 224 currently unused */ -#define __NR_tuxcall 225 -#ifndef __powerpc64__ -#define __NR_sendfile64 226 -#endif -#define __NR_io_setup 227 -#define __NR_io_destroy 228 -#define __NR_io_getevents 229 -#define __NR_io_submit 230 -#define __NR_io_cancel 231 -#define __NR_set_tid_address 232 -#define __NR_fadvise64 233 -#define __NR_exit_group 234 -#define __NR_lookup_dcookie 235 -#define __NR_epoll_create 236 -#define __NR_epoll_ctl 237 -#define __NR_epoll_wait 238 -#define __NR_remap_file_pages 239 -#define __NR_timer_create 240 -#define __NR_timer_settime 241 -#define __NR_timer_gettime 242 -#define __NR_timer_getoverrun 243 -#define __NR_timer_delete 244 -#define __NR_clock_settime 245 -#define __NR_clock_gettime 246 -#define __NR_clock_getres 247 -#define __NR_clock_nanosleep 248 -#define __NR_swapcontext 249 -#define __NR_tgkill 250 -#define __NR_utimes 251 -#define __NR_statfs64 252 -#define __NR_fstatfs64 253 -#ifndef __powerpc64__ -#define __NR_fadvise64_64 254 -#endif -#define __NR_rtas 255 -#define __NR_sys_debug_setcontext 256 -/* Number 257 is reserved for vserver */ -#define __NR_migrate_pages 258 -#define __NR_mbind 259 -#define __NR_get_mempolicy 260 -#define __NR_set_mempolicy 261 -#define __NR_mq_open 262 -#define __NR_mq_unlink 263 -#define __NR_mq_timedsend 264 -#define __NR_mq_timedreceive 265 -#define __NR_mq_notify 266 -#define __NR_mq_getsetattr 267 -#define __NR_kexec_load 268 -#define __NR_add_key 269 -#define __NR_request_key 270 -#define __NR_keyctl 271 -#define __NR_waitid 272 -#define __NR_ioprio_set 273 -#define __NR_ioprio_get 274 -#define __NR_inotify_init 275 -#define __NR_inotify_add_watch 276 -#define __NR_inotify_rm_watch 277 -#define __NR_spu_run 278 -#define __NR_spu_create 279 -#define __NR_pselect6 280 -#define __NR_ppoll 281 -#define __NR_unshare 282 -#define __NR_splice 283 -#define __NR_tee 284 -#define __NR_vmsplice 285 -#define __NR_openat 286 -#define __NR_mkdirat 287 -#define __NR_mknodat 288 -#define __NR_fchownat 289 -#define __NR_futimesat 290 -#ifdef __powerpc64__ -#define __NR_newfstatat 291 -#else -#define __NR_fstatat64 291 -#endif -#define __NR_unlinkat 292 -#define __NR_renameat 293 -#define __NR_linkat 294 -#define __NR_symlinkat 295 -#define __NR_readlinkat 296 -#define __NR_fchmodat 297 -#define __NR_faccessat 298 -#define __NR_get_robust_list 299 -#define __NR_set_robust_list 300 -#define __NR_move_pages 301 -#define __NR_getcpu 302 -#define __NR_epoll_pwait 303 -#define __NR_utimensat 304 -#define __NR_signalfd 305 -#define __NR_timerfd_create 306 -#define __NR_eventfd 307 -#define __NR_sync_file_range2 308 -#define __NR_fallocate 309 -#define __NR_subpage_prot 310 -#define __NR_timerfd_settime 311 -#define __NR_timerfd_gettime 312 -#define __NR_signalfd4 313 -#define __NR_eventfd2 314 -#define __NR_epoll_create1 315 -#define __NR_dup3 316 -#define __NR_pipe2 317 -#define __NR_inotify_init1 318 -#define __NR_perf_event_open 319 -#define __NR_preadv 320 -#define __NR_pwritev 321 -#define __NR_rt_tgsigqueueinfo 322 -#define __NR_fanotify_init 323 -#define __NR_fanotify_mark 324 -#define __NR_prlimit64 325 -#define __NR_socket 326 -#define __NR_bind 327 -#define __NR_connect 328 -#define __NR_listen 329 -#define __NR_accept 330 -#define __NR_getsockname 331 -#define __NR_getpeername 332 -#define __NR_socketpair 333 -#define __NR_send 334 -#define __NR_sendto 335 -#define __NR_recv 336 -#define __NR_recvfrom 337 -#define __NR_shutdown 338 -#define __NR_setsockopt 339 -#define __NR_getsockopt 340 -#define __NR_sendmsg 341 -#define __NR_recvmsg 342 -#define __NR_recvmmsg 343 -#define __NR_accept4 344 -#define __NR_name_to_handle_at 345 -#define __NR_open_by_handle_at 346 -#define __NR_clock_adjtime 347 -#define __NR_syncfs 348 -#define __NR_sendmmsg 349 -#define __NR_setns 350 -#define __NR_process_vm_readv 351 -#define __NR_process_vm_writev 352 -#define __NR_finit_module 353 -#define __NR_kcmp 354 -#define __NR_sched_setattr 355 -#define __NR_sched_getattr 356 -#define __NR_renameat2 357 -#define __NR_seccomp 358 -#define __NR_getrandom 359 -#define __NR_memfd_create 360 -#define __NR_bpf 361 -#define __NR_execveat 362 -#define __NR_switch_endian 363 -#define __NR_userfaultfd 364 -#define __NR_membarrier 365 -#define __NR_mlock2 378 -#define __NR_copy_file_range 379 -#define __NR_preadv2 380 -#define __NR_pwritev2 381 -#define __NR_kexec_file_load 382 -#define __NR_statx 383 -#define __NR_pkey_alloc 384 -#define __NR_pkey_free 385 -#define __NR_pkey_mprotect 386 -#define __NR_rseq 387 -#define __NR_io_pgetevents 388 - -#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ diff --git a/tools/perf/check-headers.sh b/tools/perf/check-headers.sh index b51e952ab35f..7b55613924de 100755 --- a/tools/perf/check-headers.sh +++ b/tools/perf/check-headers.sh @@ -50,7 +50,6 @@ arch/parisc/include/uapi/asm/errno.h arch/powerpc/include/uapi/asm/errno.h arch/sparc/include/uapi/asm/errno.h arch/x86/include/uapi/asm/errno.h -arch/powerpc/include/uapi/asm/unistd.h include/asm-generic/bitops/arch_hweight.h include/asm-generic/bitops/const_hweight.h include/asm-generic/bitops/__fls.h From df209c43a0e8258e096fb722dfbdae4f0dd13fde Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Sat, 1 Dec 2018 12:57:18 +0100 Subject: [PATCH 206/246] gpio: pl061: handle failed allocations devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by: Nicholas Mc Guire Fixes: 684284b64aae ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by: Linus Walleij --- arch/arm/mach-integrator/impd1.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index a109f6482413..0f916c245a2e 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -393,7 +393,11 @@ static int __ref impd1_probe(struct lm_device *dev) sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), GFP_KERNEL); chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); - mmciname = kasprintf(GFP_KERNEL, "lm%x:00700", dev->id); + mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL, + "lm%x:00700", dev->id); + if (!lookup || !chipname || !mmciname) + return -ENOMEM; + lookup->dev_id = mmciname; /* * Offsets on GPIO block 1: From 1b3922a8bc74231f9a767d1be6d9a061a4d4eeab Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Tue, 8 Jan 2019 14:08:18 +0800 Subject: [PATCH 207/246] btrfs: Use real device structure to verify dev extent [BUG] Linux v5.0-rc1 will fail fstests/btrfs/163 with the following kernel message: BTRFS error (device dm-6): dev extent devid 1 physical offset 13631488 len 8388608 is beyond device boundary 0 BTRFS error (device dm-6): failed to verify dev extents against chunks: -117 BTRFS error (device dm-6): open_ctree failed [CAUSE] Commit cf90d884b347 ("btrfs: Introduce mount time chunk <-> dev extent mapping check") introduced strict check on dev extents. We use btrfs_find_device() with dev uuid and fs uuid set to NULL, and only dependent on @devid to find the real device. For seed devices, we call clone_fs_devices() in open_seed_devices() to allow us search seed devices directly. However clone_fs_devices() just populates devices with devid and dev uuid, without populating other essential members, like disk_total_bytes. This makes any device returned by btrfs_find_device(fs_info, devid, NULL, NULL) is just a dummy, with 0 disk_total_bytes, and any dev extents on the seed device will not pass the device boundary check. [FIX] This patch will try to verify the device returned by btrfs_find_device() and if it's a dummy then re-search in seed devices. Fixes: cf90d884b347 ("btrfs: Introduce mount time chunk <-> dev extent mapping check") CC: stable@vger.kernel.org # 4.19+ Reported-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 2576b1a379c9..3e4f8f88353e 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -7825,6 +7825,18 @@ static int verify_one_dev_extent(struct btrfs_fs_info *fs_info, ret = -EUCLEAN; goto out; } + + /* It's possible this device is a dummy for seed device */ + if (dev->disk_total_bytes == 0) { + dev = find_device(fs_info->fs_devices->seed, devid, NULL); + if (!dev) { + btrfs_err(fs_info, "failed to find seed devid %llu", + devid); + ret = -EUCLEAN; + goto out; + } + } + if (physical_offset + physical_len > dev->disk_total_bytes) { btrfs_err(fs_info, "dev extent devid %llu physical offset %llu len %llu is beyond device boundary %llu", From b89d82ef01b33bc50cbaa8ff05607879b40d0704 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 8 Jan 2019 16:19:01 +0000 Subject: [PATCH 208/246] arm64: kpti: Avoid rewriting early page tables when KASLR is enabled A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") is that the linear map is created with page granularity, which means that transitioning the early page table from global to non-global mappings when enabling kpti can take a significant amount of time during boot. Given that most CPU implementations do not require kpti, this mainly impacts KASLR builds where kpti is forcefully enabled. However, in these situations we know early on that non-global mappings are required and can avoid the use of global mappings from the beginning. The only gotcha is Cavium erratum #27456, which we must detect based on the MIDR value of the boot CPU. Reviewed-by: Ard Biesheuvel Reported-by: John Garry Signed-off-by: Will Deacon --- arch/arm64/include/asm/mmu.h | 41 +++++++++++++++++++++++++++ arch/arm64/include/asm/pgtable-prot.h | 4 +-- arch/arm64/kernel/cpu_errata.c | 2 +- arch/arm64/kernel/cpufeature.c | 9 ++++-- arch/arm64/kernel/head.S | 1 + 5 files changed, 52 insertions(+), 5 deletions(-) diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index 7689c7aa1d77..ac352accb3d9 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -16,6 +16,8 @@ #ifndef __ASM_MMU_H #define __ASM_MMU_H +#include + #define MMCF_AARCH32 0x1 /* mm context flag for AArch32 executables */ #define USER_ASID_BIT 48 #define USER_ASID_FLAG (UL(1) << USER_ASID_BIT) @@ -44,6 +46,45 @@ static inline bool arm64_kernel_unmapped_at_el0(void) cpus_have_const_cap(ARM64_UNMAP_KERNEL_AT_EL0); } +static inline bool arm64_kernel_use_ng_mappings(void) +{ + bool tx1_bug; + + /* What's a kpti? Use global mappings if we don't know. */ + if (!IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0)) + return false; + + /* + * Note: this function is called before the CPU capabilities have + * been configured, so our early mappings will be global. If we + * later determine that kpti is required, then + * kpti_install_ng_mappings() will make them non-global. + */ + if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE)) + return arm64_kernel_unmapped_at_el0(); + + /* + * KASLR is enabled so we're going to be enabling kpti on non-broken + * CPUs regardless of their susceptibility to Meltdown. Rather + * than force everybody to go through the G -> nG dance later on, + * just put down non-global mappings from the beginning. + */ + if (!IS_ENABLED(CONFIG_CAVIUM_ERRATUM_27456)) { + tx1_bug = false; +#ifndef MODULE + } else if (!static_branch_likely(&arm64_const_caps_ready)) { + extern const struct midr_range cavium_erratum_27456_cpus[]; + + tx1_bug = is_midr_in_range_list(read_cpuid_id(), + cavium_erratum_27456_cpus); +#endif + } else { + tx1_bug = __cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_27456); + } + + return !tx1_bug && kaslr_offset() > 0; +} + typedef void (*bp_hardening_cb_t)(void); struct bp_hardening_data { diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index 78b942c1bea4..986e41c4c32b 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -37,8 +37,8 @@ #define _PROT_DEFAULT (PTE_TYPE_PAGE | PTE_AF | PTE_SHARED) #define _PROT_SECT_DEFAULT (PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S) -#define PTE_MAYBE_NG (arm64_kernel_unmapped_at_el0() ? PTE_NG : 0) -#define PMD_MAYBE_NG (arm64_kernel_unmapped_at_el0() ? PMD_SECT_NG : 0) +#define PTE_MAYBE_NG (arm64_kernel_use_ng_mappings() ? PTE_NG : 0) +#define PMD_MAYBE_NG (arm64_kernel_use_ng_mappings() ? PMD_SECT_NG : 0) #define PROT_DEFAULT (_PROT_DEFAULT | PTE_MAYBE_NG) #define PROT_SECT_DEFAULT (_PROT_SECT_DEFAULT | PMD_MAYBE_NG) diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 09ac548c9d44..9950bb0cbd52 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -553,7 +553,7 @@ static const struct midr_range arm64_repeat_tlbi_cpus[] = { #endif #ifdef CONFIG_CAVIUM_ERRATUM_27456 -static const struct midr_range cavium_erratum_27456_cpus[] = { +const struct midr_range cavium_erratum_27456_cpus[] = { /* Cavium ThunderX, T88 pass 1.x - 2.1 */ MIDR_RANGE(MIDR_THUNDERX, 0, 0, 1, 1), /* Cavium ThunderX, T81 pass 1.0 */ diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 4f272399de89..f6d84e2c92fe 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -983,7 +983,7 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, /* Useful for KASLR robustness */ if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) - return true; + return kaslr_offset() > 0; /* Don't force KPTI for CPUs that are not vulnerable */ if (is_midr_in_range_list(read_cpuid_id(), kpti_safe_list)) @@ -1003,7 +1003,12 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused) static bool kpti_applied = false; int cpu = smp_processor_id(); - if (kpti_applied) + /* + * We don't need to rewrite the page-tables if either we've done + * it already or we have KASLR enabled and therefore have not + * created any global mappings at all. + */ + if (kpti_applied || kaslr_offset() > 0) return; remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings); diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index c7213674cb24..15d79a8e5e5e 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -475,6 +475,7 @@ ENDPROC(__primary_switched) ENTRY(kimage_vaddr) .quad _text - TEXT_OFFSET +EXPORT_SYMBOL(kimage_vaddr) /* * If we're fortunate enough to boot at EL2, ensure that the world is From 8428817dc40006dca0a531cfa06e89cb3b41790d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 5 Jan 2019 15:25:29 +0300 Subject: [PATCH 209/246] cifs: Fix a debug message This debug message was never shown because it was checking for NULL returns but extract_hostname() returns error pointers. Fixes: 93d5cb517db3 ("cifs: Add support for failover in cifs_reconnect()") Signed-off-by: Dan Carpenter Signed-off-by: Steve French Reviewed-by: Paulo Alcantara --- fs/cifs/connect.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index f66529679ca2..683310f26171 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -433,9 +433,10 @@ static void reconn_inval_dfs_target(struct TCP_Server_Info *server, kfree(server->hostname); server->hostname = extract_hostname(name); - if (!server->hostname) { - cifs_dbg(FYI, "%s: failed to extract hostname from target: %d\n", - __func__, -ENOMEM); + if (IS_ERR(server->hostname)) { + cifs_dbg(FYI, + "%s: failed to extract hostname from target: %ld\n", + __func__, PTR_ERR(server->hostname)); } } From c715f89c4dab76317c773df2611af2dac4dea2b7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 5 Jan 2019 21:18:03 +0300 Subject: [PATCH 210/246] cifs: Fix a tiny potential memory leak The most recent "it" allocation is leaked on this error path. I believe that small allocations always succeed in current kernels so this doesn't really affect run time. Fixes: 54be1f6c1c37 ("cifs: Add DFS cache routines") Signed-off-by: Dan Carpenter Signed-off-by: Steve French --- fs/cifs/dfs_cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/dfs_cache.c b/fs/cifs/dfs_cache.c index cd63c4a70875..09b7d0d4f6e4 100644 --- a/fs/cifs/dfs_cache.c +++ b/fs/cifs/dfs_cache.c @@ -776,6 +776,7 @@ static int get_tgt_list(const struct dfs_cache_entry *ce, it->it_name = kstrndup(t->t_name, strlen(t->t_name), GFP_KERNEL); if (!it->it_name) { + kfree(it); rc = -ENOMEM; goto err_free_it; } From b983f7e92348d7e7d091db1b78b7915e9dd3d63a Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Wed, 19 Dec 2018 22:49:09 +0000 Subject: [PATCH 211/246] CIFS: Fix adjustment of credits for MTU requests Currently for MTU requests we allocate maximum possible credits in advance and then adjust them according to the request size. While we were adjusting the number of credits belonging to the server, we were skipping adjustment of credits belonging to the request. This patch fixes it by setting request credits to CreditCharge field value of SMB2 packet header. Also ask 1 credit more for async read and write operations to increase parallelism and match the behavior of other operations. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French CC: Stable --- fs/cifs/smb2pdu.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index e57f6aa1d638..b9d7891edaa1 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -3278,12 +3278,14 @@ smb2_async_readv(struct cifs_readdata *rdata) if (rdata->credits) { shdr->CreditCharge = cpu_to_le16(DIV_ROUND_UP(rdata->bytes, SMB2_MAX_BUFFER_SIZE)); - shdr->CreditRequest = shdr->CreditCharge; + shdr->CreditRequest = + cpu_to_le16(le16_to_cpu(shdr->CreditCharge) + 1); spin_lock(&server->req_lock); server->credits += rdata->credits - le16_to_cpu(shdr->CreditCharge); spin_unlock(&server->req_lock); wake_up(&server->request_q); + rdata->credits = le16_to_cpu(shdr->CreditCharge); flags |= CIFS_HAS_CREDITS; } @@ -3555,12 +3557,14 @@ smb2_async_writev(struct cifs_writedata *wdata, if (wdata->credits) { shdr->CreditCharge = cpu_to_le16(DIV_ROUND_UP(wdata->bytes, SMB2_MAX_BUFFER_SIZE)); - shdr->CreditRequest = shdr->CreditCharge; + shdr->CreditRequest = + cpu_to_le16(le16_to_cpu(shdr->CreditCharge) + 1); spin_lock(&server->req_lock); server->credits += wdata->credits - le16_to_cpu(shdr->CreditCharge); spin_unlock(&server->req_lock); wake_up(&server->request_q); + wdata->credits = le16_to_cpu(shdr->CreditCharge); flags |= CIFS_HAS_CREDITS; } From 33fa5c8b8a7dbe6353a56eaa654b790348890d42 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 3 Jan 2019 16:45:13 -0800 Subject: [PATCH 212/246] CIFS: Do not set credits to 1 if the server didn't grant anything Currently we reset the number of total credits granted by the server to 1 if the server didn't grant us anything int the response. This violates the SMB3 protocol - we need to trust the server and use the credit values from the response. Fix this by removing the corresponding code. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French CC: Stable --- fs/cifs/transport.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 5be7302853b6..8e75d689be46 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -894,8 +894,6 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, for (i = 0; i < num_rqst; i++) if (midQ[i]->resp_buf) credits += ses->server->ops->get_credits(midQ[i]); - if (!credits) - credits = 1; for (i = 0; i < num_rqst; i++) { if (rc < 0) From 8544f4aa9dd19a04d1244dae10feecc813ccf175 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Sat, 22 Dec 2018 12:40:05 -0800 Subject: [PATCH 213/246] CIFS: Fix credit computation for compounded requests In SMB3 protocol every part of the compound chain consumes credits individually, so we need to call wait_for_free_credits() for each of the PDUs in the chain. If an operation is interrupted, we must ensure we return all credits taken from the server structure back. Without this patch server can sometimes disconnect the session due to credit mismatches, especially when first operation(s) are large writes. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French CC: Stable --- fs/cifs/transport.c | 59 +++++++++++++++++++++++++++++++-------------- 1 file changed, 41 insertions(+), 18 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 8e75d689be46..e047f06c9b4f 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -795,7 +795,8 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, int i, j, rc = 0; int timeout, optype; struct mid_q_entry *midQ[MAX_COMPOUND]; - unsigned int credits = 0; + bool cancelled_mid[MAX_COMPOUND] = {false}; + unsigned int credits[MAX_COMPOUND] = {0}; char *buf; timeout = flags & CIFS_TIMEOUT_MASK; @@ -813,13 +814,31 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, return -ENOENT; /* - * Ensure that we do not send more than 50 overlapping requests - * to the same server. We may make this configurable later or - * use ses->maxReq. + * Ensure we obtain 1 credit per request in the compound chain. + * It can be optimized further by waiting for all the credits + * at once but this can wait long enough if we don't have enough + * credits due to some heavy operations in progress or the server + * not granting us much, so a fallback to the current approach is + * needed anyway. */ - rc = wait_for_free_request(ses->server, timeout, optype); - if (rc) - return rc; + for (i = 0; i < num_rqst; i++) { + rc = wait_for_free_request(ses->server, timeout, optype); + if (rc) { + /* + * We haven't sent an SMB packet to the server yet but + * we already obtained credits for i requests in the + * compound chain - need to return those credits back + * for future use. Note that we need to call add_credits + * multiple times to match the way we obtained credits + * in the first place and to account for in flight + * requests correctly. + */ + for (j = 0; j < i; j++) + add_credits(ses->server, 1, optype); + return rc; + } + credits[i] = 1; + } /* * Make sure that we sign in the same order that we send on this socket @@ -835,8 +854,10 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, for (j = 0; j < i; j++) cifs_delete_mid(midQ[j]); mutex_unlock(&ses->server->srv_mutex); + /* Update # of requests on wire to server */ - add_credits(ses->server, 1, optype); + for (j = 0; j < num_rqst; j++) + add_credits(ses->server, credits[j], optype); return PTR_ERR(midQ[i]); } @@ -883,17 +904,16 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, if (midQ[i]->mid_state == MID_REQUEST_SUBMITTED) { midQ[i]->mid_flags |= MID_WAIT_CANCELLED; midQ[i]->callback = DeleteMidQEntry; - spin_unlock(&GlobalMid_Lock); - add_credits(ses->server, 1, optype); - return rc; + cancelled_mid[i] = true; } spin_unlock(&GlobalMid_Lock); } } for (i = 0; i < num_rqst; i++) - if (midQ[i]->resp_buf) - credits += ses->server->ops->get_credits(midQ[i]); + if (!cancelled_mid[i] && midQ[i]->resp_buf + && (midQ[i]->mid_state == MID_RESPONSE_RECEIVED)) + credits[i] = ses->server->ops->get_credits(midQ[i]); for (i = 0; i < num_rqst; i++) { if (rc < 0) @@ -901,8 +921,9 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, rc = cifs_sync_mid_result(midQ[i], ses->server); if (rc != 0) { - add_credits(ses->server, credits, optype); - return rc; + /* mark this mid as cancelled to not free it below */ + cancelled_mid[i] = true; + goto out; } if (!midQ[i]->resp_buf || @@ -949,9 +970,11 @@ out: * This is prevented above by using a noop callback that will not * wake this thread except for the very last PDU. */ - for (i = 0; i < num_rqst; i++) - cifs_delete_mid(midQ[i]); - add_credits(ses->server, credits, optype); + for (i = 0; i < num_rqst; i++) { + if (!cancelled_mid[i]) + cifs_delete_mid(midQ[i]); + add_credits(ses->server, credits[i], optype); + } return rc; } From 2076607a20bd4dfba699185616cbbbce06d3fa59 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 26 Dec 2018 10:06:19 -0200 Subject: [PATCH 214/246] qcom-scm: Include header Since commit e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") the DRM_MSM symbol can be selected by SOC_IMX5 causing the following error when building imx_v6_v7_defconfig: In file included from ../drivers/gpu/drm/msm/adreno/a5xx_gpu.c:17:0: ../include/linux/qcom_scm.h: In function 'qcom_scm_set_cold_boot_addr': ../include/linux/qcom_scm.h:73:10: error: 'ENODEV' undeclared (first use in this function) return -ENODEV; Include the header file to fix this problem. Reported-by: kernelci.org bot Fixes: e6f6d63ed14c ("drm/msm: add headless gpu device for imx5") Signed-off-by: Fabio Estevam Reviewed-by: Bjorn Andersson Tested-by: Guenter Roeck Signed-off-by: Andy Gross --- include/linux/qcom_scm.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 1637385bcc17..d0aecc04c54b 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -13,6 +13,7 @@ #ifndef __QCOM_SCM_H #define __QCOM_SCM_H +#include #include #include From 6ebec961d59bccf65d08b13fc1ad4e6272a89338 Mon Sep 17 00:00:00 2001 From: Yi Zeng Date: Wed, 9 Jan 2019 15:33:07 +0800 Subject: [PATCH 215/246] i2c: dev: prevent adapter retries and timeout being set as minus value If adapter->retries is set to a minus value from user space via ioctl, it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to adapter->algo->master_xfer and adapter->algo->smbus_xfer that is registered by the underlying bus drivers, and return value 0 to all the callers. The bus driver will never be accessed anymore by all users, besides, the users may still get successful return value without any error or information log print out. If adapter->timeout is set to minus value from user space via ioctl, it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer always break after the the first try, due to the time_after always returns true. Signed-off-by: Yi Zeng [wsa: minor grammar updates to commit message] Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-dev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 1aca742fde4a..ccd76c71af09 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -470,9 +470,15 @@ static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) data_arg.data); } case I2C_RETRIES: + if (arg > INT_MAX) + return -EINVAL; + client->adapter->retries = arg; break; case I2C_TIMEOUT: + if (arg > INT_MAX) + return -EINVAL; + /* For historical reasons, user-space sets the timeout * value in units of 10 ms. */ From b67d4530cdade7ebfafa2c6b46f2a0dad3e41bcb Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 8 Jan 2019 13:59:10 -0800 Subject: [PATCH 216/246] i2c: tegra: Fix Maximum transfer size Tegra194 supports maximum 64K Bytes transfer per packet. Tegra186 and prior supports maximum 4K Bytes transfer per packet. This patch fixes this payload difference between Tegra194 and prior Tegra chipsets using separate i2c_adapter_quirks. Signed-off-by: Sowjanya Komatineni Acked-by: Thierry Reding Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index e417ebf7628c..c77adbbea0c7 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -155,6 +155,8 @@ enum msg_end_type { * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that * provides additional features and allows for longer messages to * be transferred in one go. + * @quirks: i2c adapter quirks for limiting write/read transfer size and not + * allowing 0 length transfers. */ struct tegra_i2c_hw_feature { bool has_continue_xfer_support; @@ -167,6 +169,7 @@ struct tegra_i2c_hw_feature { bool has_multi_master_mode; bool has_slcg_override_reg; bool has_mst_fifo; + const struct i2c_adapter_quirks *quirks; }; /** @@ -837,6 +840,10 @@ static const struct i2c_adapter_quirks tegra_i2c_quirks = { .max_write_len = 4096, }; +static const struct i2c_adapter_quirks tegra194_i2c_quirks = { + .flags = I2C_AQ_NO_ZERO_LEN, +}; + static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_continue_xfer_support = false, .has_per_pkt_xfer_complete_irq = false, @@ -848,6 +855,7 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { @@ -861,6 +869,7 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { @@ -874,6 +883,7 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = false, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { @@ -887,6 +897,7 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = { .has_multi_master_mode = false, .has_slcg_override_reg = true, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { @@ -900,6 +911,7 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = { .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = false, + .quirks = &tegra_i2c_quirks, }; static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { @@ -913,6 +925,7 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = { .has_multi_master_mode = true, .has_slcg_override_reg = true, .has_mst_fifo = true, + .quirks = &tegra194_i2c_quirks, }; /* Match table for of_platform binding */ @@ -964,7 +977,6 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->base = base; i2c_dev->div_clk = div_clk; i2c_dev->adapter.algo = &tegra_i2c_algo; - i2c_dev->adapter.quirks = &tegra_i2c_quirks; i2c_dev->irq = irq; i2c_dev->cont_id = pdev->id; i2c_dev->dev = &pdev->dev; @@ -980,6 +992,7 @@ static int tegra_i2c_probe(struct platform_device *pdev) i2c_dev->hw = of_device_get_match_data(&pdev->dev); i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node, "nvidia,tegra20-i2c-dvc"); + i2c_dev->adapter.quirks = i2c_dev->hw->quirks; init_completion(&i2c_dev->msg_complete); spin_lock_init(&i2c_dev->xfer_lock); From 15f77c4ade3364106a3a397f0a8d6fce9d6a6326 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 11 Jan 2019 16:08:20 +1000 Subject: [PATCH 217/246] drm/nouveau: register backlight on pascal and newer Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_backlight.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c index 5f5be6368aed..c7a94c94dbf3 100644 --- a/drivers/gpu/drm/nouveau/nouveau_backlight.c +++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c @@ -253,6 +253,9 @@ nouveau_backlight_init(struct drm_connector *connector) case NV_DEVICE_INFO_V0_FERMI: case NV_DEVICE_INFO_V0_KEPLER: case NV_DEVICE_INFO_V0_MAXWELL: + case NV_DEVICE_INFO_V0_PASCAL: + case NV_DEVICE_INFO_V0_VOLTA: + case NV_DEVICE_INFO_V0_TURING: ret = nv50_backlight_init(nv_encoder, &props, &ops); break; default: From 118780066e30c34de3d9349710b51780bfa0ba83 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Sep 2018 12:58:43 +0200 Subject: [PATCH 218/246] drm/nouveau: Don't disable polling in fallback mode When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c2857 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447 Reported-by: Thomas Blume Signed-off-by: Takashi Iwai Reviewed-by: Martin Peres Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c index 3695cde669f8..07914e36939e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/therm/base.c @@ -132,11 +132,12 @@ nvkm_therm_update(struct nvkm_therm *therm, int mode) duty = nvkm_therm_update_linear(therm); break; case NVBIOS_THERM_FAN_OTHER: - if (therm->cstate) + if (therm->cstate) { duty = therm->cstate; - else + poll = false; + } else { duty = nvkm_therm_update_linear_fallback(therm); - poll = false; + } break; } immd = false; From a5176a4cb85bb6213daadf691097cf411da35df2 Mon Sep 17 00:00:00 2001 From: Ilia Mirkin Date: Thu, 13 Dec 2018 22:44:08 -0500 Subject: [PATCH 219/246] drm/nouveau/falcon: avoid touching registers if engine is off Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980 Signed-off-by: Ilia Mirkin Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/engine/falcon.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c b/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c index 816ccaedfc73..8675613e142b 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/falcon.c @@ -22,6 +22,7 @@ #include #include +#include #include #include @@ -107,8 +108,10 @@ nvkm_falcon_fini(struct nvkm_engine *engine, bool suspend) } } - nvkm_mask(device, base + 0x048, 0x00000003, 0x00000000); - nvkm_wr32(device, base + 0x014, 0xffffffff); + if (nvkm_mc_enabled(device, engine->subdev.index)) { + nvkm_mask(device, base + 0x048, 0x00000003, 0x00000000); + nvkm_wr32(device, base + 0x014, 0xffffffff); + } return 0; } From 06382deac2b8a49bbc5aaa3c9118fed6da4a1ac1 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 11 Jan 2019 10:40:13 +0100 Subject: [PATCH 220/246] Revert "staging: rtl8723bs: Mark ACPI table declaration as used" This reverts commit e6d093719e22a09e778edde192dfd89a0cd77b5c. Turns out it is not needed at all, a fix for clang was made and accepted upstream in that project that makes this change unnecessary. So revert it. Reported-by: Nick Desaulniers Cc: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8723bs/os_dep/sdio_intf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/rtl8723bs/os_dep/sdio_intf.c b/drivers/staging/rtl8723bs/os_dep/sdio_intf.c index 7c03b69b8ed3..6d02904de63f 100644 --- a/drivers/staging/rtl8723bs/os_dep/sdio_intf.c +++ b/drivers/staging/rtl8723bs/os_dep/sdio_intf.c @@ -22,7 +22,7 @@ static const struct sdio_device_id sdio_ids[] = { SDIO_DEVICE(0x024c, 0xb723), }, { /* end: all zeroes */ }, }; -static const struct acpi_device_id acpi_ids[] __used = { +static const struct acpi_device_id acpi_ids[] = { {"OBDA8723", 0x0000}, {} }; From c7777236dd8f587f6a8d6800c03df318fd4d2627 Mon Sep 17 00:00:00 2001 From: Jean-Philippe Brucker Date: Thu, 10 Jan 2019 18:41:51 +0000 Subject: [PATCH 221/246] ACPI/IORT: Fix rc_dma_get_range() When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback() expects the opaque pointer argument to be a PCI bus device. At the moment rc_dma_get_range() passes the PCI endpoint instead of the bus, and we've been lucky to have pci_domain_nr(ptr) return 0 instead of crashing. Pass the bus device to iort_scan_node(). Fixes: 5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes") Reported-by: Eric Auger Signed-off-by: Jean-Philippe Brucker Signed-off-by: Lorenzo Pieralisi Reviewed-by: Eric Auger Acked-by: Robin Murphy Cc: stable@vger.kernel.org Cc: Will Deacon Cc: Hanjun Guo Cc: Sudeep Holla Cc: Catalin Marinas Cc: "Rafael J. Wysocki" Signed-off-by: Will Deacon --- drivers/acpi/arm64/iort.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 5d29783ee5bd..e48894e002ba 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -952,9 +952,10 @@ static int rc_dma_get_range(struct device *dev, u64 *size) { struct acpi_iort_node *node; struct acpi_iort_root_complex *rc; + struct pci_bus *pbus = to_pci_dev(dev)->bus; node = iort_scan_node(ACPI_IORT_NODE_PCI_ROOT_COMPLEX, - iort_match_node_callback, dev); + iort_match_node_callback, &pbus->dev); if (!node || node->revision < 1) return -ENODEV; From 279667212ab2a4f36c3b0347657ddcc11f9cfa25 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Fri, 11 Jan 2019 16:40:21 +0900 Subject: [PATCH 222/246] arm64: kexec_file: return successfully even if kaslr-seed doesn't exist In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro Signed-off-by: Will Deacon --- arch/arm64/kernel/machine_kexec_file.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c index 10e33860e47a..f2c211a6229b 100644 --- a/arch/arm64/kernel/machine_kexec_file.c +++ b/arch/arm64/kernel/machine_kexec_file.c @@ -87,7 +87,9 @@ static int setup_dtb(struct kimage *image, /* add kaslr-seed */ ret = fdt_delprop(dtb, off, FDT_PROP_KASLR_SEED); - if (ret && (ret != -FDT_ERR_NOTFOUND)) + if (ret == -FDT_ERR_NOTFOUND) + ret = 0; + else if (ret) goto out; if (rng_is_initialized()) { From 21face6f0d4d033d949d5517f307a15f76a9d9f2 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 4 Jan 2019 23:55:27 -0600 Subject: [PATCH 223/246] ARM: integrator: impd1: use struct_size() in devm_kzalloc() One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva --- arch/arm/mach-integrator/impd1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0f916c245a2e..8dfad012dfae 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -390,7 +390,7 @@ static int __ref impd1_probe(struct lm_device *dev) char *mmciname; lookup = devm_kzalloc(&dev->dev, - sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup), + struct_size(lookup, table, 3), GFP_KERNEL); chipname = devm_kstrdup(&dev->dev, devname, GFP_KERNEL); mmciname = devm_kasprintf(&dev->dev, GFP_KERNEL, From ee13919c2e8d1f904e035ad4b4239029a8994131 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 10 Jan 2019 11:27:28 -0800 Subject: [PATCH 224/246] CIFS: Do not hide EINTR after sending network packets Currently we hide EINTR code returned from sock_sendmsg() and return 0 instead. This makes a caller think that we successfully completed the network operation which is not true. Fix this by properly returning EINTR to callers. Cc: Signed-off-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index e047f06c9b4f..aaff9c5aab3d 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -387,7 +387,7 @@ smbd_done: if (rc < 0 && rc != -EINTR) cifs_dbg(VFS, "Error %d sending data on socket to server\n", rc); - else + else if (rc > 0) rc = 0; return rc; From 15bc77f94e9f0e3cfd6972f3b84bb7aaa4c36b1b Mon Sep 17 00:00:00 2001 From: Aurelien Aptel Date: Tue, 8 Jan 2019 13:41:00 +0100 Subject: [PATCH 225/246] cifs: move large array from stack to heap This addresses some compile warnings that you can see depending on configuration settings. Signed-off-by: Aurelien Aptel Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 23 ++++++++++++++++------- fs/cifs/smb2pdu.c | 23 ++++++++++++++++------- 2 files changed, 32 insertions(+), 14 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index b1f49c1c543a..332f88d753d1 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -128,24 +128,31 @@ static int __cifs_reconnect_tcon(const struct nls_table *nlsc, int rc; struct dfs_cache_tgt_list tl; struct dfs_cache_tgt_iterator *it = NULL; - char tree[MAX_TREE_SIZE + 1]; + char *tree; const char *tcp_host; size_t tcp_host_len; const char *dfs_host; size_t dfs_host_len; + tree = kzalloc(MAX_TREE_SIZE, GFP_KERNEL); + if (!tree) + return -ENOMEM; + if (tcon->ipc) { - snprintf(tree, sizeof(tree), "\\\\%s\\IPC$", + snprintf(tree, MAX_TREE_SIZE, "\\\\%s\\IPC$", tcon->ses->server->hostname); - return CIFSTCon(0, tcon->ses, tree, tcon, nlsc); + rc = CIFSTCon(0, tcon->ses, tree, tcon, nlsc); + goto out; } - if (!tcon->dfs_path) - return CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nlsc); + if (!tcon->dfs_path) { + rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nlsc); + goto out; + } rc = dfs_cache_noreq_find(tcon->dfs_path + 1, NULL, &tl); if (rc) - return rc; + goto out; extract_unc_hostname(tcon->ses->server->hostname, &tcp_host, &tcp_host_len); @@ -165,7 +172,7 @@ static int __cifs_reconnect_tcon(const struct nls_table *nlsc, continue; } - snprintf(tree, sizeof(tree), "\\%s", tgt); + snprintf(tree, MAX_TREE_SIZE, "\\%s", tgt); rc = CIFSTCon(0, tcon->ses, tree, tcon, nlsc); if (!rc) @@ -182,6 +189,8 @@ static int __cifs_reconnect_tcon(const struct nls_table *nlsc, rc = -ENOENT; } dfs_cache_free_tgts(&tl); +out: + kfree(tree); return rc; } #else diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index b9d7891edaa1..50811a7dc0e0 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -162,24 +162,31 @@ static int __smb2_reconnect(const struct nls_table *nlsc, int rc; struct dfs_cache_tgt_list tl; struct dfs_cache_tgt_iterator *it = NULL; - char tree[MAX_TREE_SIZE + 1]; + char *tree; const char *tcp_host; size_t tcp_host_len; const char *dfs_host; size_t dfs_host_len; + tree = kzalloc(MAX_TREE_SIZE, GFP_KERNEL); + if (!tree) + return -ENOMEM; + if (tcon->ipc) { - snprintf(tree, sizeof(tree), "\\\\%s\\IPC$", + snprintf(tree, MAX_TREE_SIZE, "\\\\%s\\IPC$", tcon->ses->server->hostname); - return SMB2_tcon(0, tcon->ses, tree, tcon, nlsc); + rc = SMB2_tcon(0, tcon->ses, tree, tcon, nlsc); + goto out; } - if (!tcon->dfs_path) - return SMB2_tcon(0, tcon->ses, tcon->treeName, tcon, nlsc); + if (!tcon->dfs_path) { + rc = SMB2_tcon(0, tcon->ses, tcon->treeName, tcon, nlsc); + goto out; + } rc = dfs_cache_noreq_find(tcon->dfs_path + 1, NULL, &tl); if (rc) - return rc; + goto out; extract_unc_hostname(tcon->ses->server->hostname, &tcp_host, &tcp_host_len); @@ -199,7 +206,7 @@ static int __smb2_reconnect(const struct nls_table *nlsc, continue; } - snprintf(tree, sizeof(tree), "\\%s", tgt); + snprintf(tree, MAX_TREE_SIZE, "\\%s", tgt); rc = SMB2_tcon(0, tcon->ses, tree, tcon, nlsc); if (!rc) @@ -216,6 +223,8 @@ static int __smb2_reconnect(const struct nls_table *nlsc, rc = -ENOENT; } dfs_cache_free_tgts(&tl); +out: + kfree(tree); return rc; } #else From 92a8109e4d3a34fb6b115c9098b51767dc933444 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Tue, 8 Jan 2019 18:30:56 +0000 Subject: [PATCH 226/246] cifs: Limit memory used by lock request calls to a page The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by: Ross Lagerwall Signed-off-by: Steve French --- fs/cifs/file.c | 8 ++++++++ fs/cifs/smb2file.c | 4 ++++ 2 files changed, 12 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index e3e3a7550205..673f948e4760 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1140,6 +1140,10 @@ cifs_push_mandatory_locks(struct cifsFileInfo *cfile) return -EINVAL; } + BUILD_BUG_ON(sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE) > + PAGE_SIZE); + max_buf = min_t(unsigned int, max_buf - sizeof(struct smb_hdr), + PAGE_SIZE); max_num = (max_buf - sizeof(struct smb_hdr)) / sizeof(LOCKING_ANDX_RANGE); buf = kcalloc(max_num, sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL); @@ -1478,6 +1482,10 @@ cifs_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock, if (!max_buf) return -EINVAL; + BUILD_BUG_ON(sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE) > + PAGE_SIZE); + max_buf = min_t(unsigned int, max_buf - sizeof(struct smb_hdr), + PAGE_SIZE); max_num = (max_buf - sizeof(struct smb_hdr)) / sizeof(LOCKING_ANDX_RANGE); buf = kcalloc(max_num, sizeof(LOCKING_ANDX_RANGE), GFP_KERNEL); diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c index 4ed10dd086e6..eff01ed6db0a 100644 --- a/fs/cifs/smb2file.c +++ b/fs/cifs/smb2file.c @@ -128,6 +128,8 @@ smb2_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock, if (!max_buf) return -EINVAL; + BUILD_BUG_ON(sizeof(struct smb2_lock_element) > PAGE_SIZE); + max_buf = min_t(unsigned int, max_buf, PAGE_SIZE); max_num = max_buf / sizeof(struct smb2_lock_element); buf = kcalloc(max_num, sizeof(struct smb2_lock_element), GFP_KERNEL); if (!buf) @@ -264,6 +266,8 @@ smb2_push_mandatory_locks(struct cifsFileInfo *cfile) return -EINVAL; } + BUILD_BUG_ON(sizeof(struct smb2_lock_element) > PAGE_SIZE); + max_buf = min_t(unsigned int, max_buf, PAGE_SIZE); max_num = max_buf / sizeof(struct smb2_lock_element); buf = kcalloc(max_num, sizeof(struct smb2_lock_element), GFP_KERNEL); if (!buf) { From b9a74cde94957d82003fb9f7ab4777938ca851cd Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Tue, 8 Jan 2019 18:30:57 +0000 Subject: [PATCH 227/246] cifs: Fix potential OOB access of lock element array If maxBuf is small but non-zero, it could result in a zero sized lock element array which we would then try and access OOB. Signed-off-by: Ross Lagerwall Signed-off-by: Steve French CC: Stable --- fs/cifs/file.c | 8 ++++---- fs/cifs/smb2file.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 673f948e4760..5b6f8392d9db 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1132,10 +1132,10 @@ cifs_push_mandatory_locks(struct cifsFileInfo *cfile) /* * Accessing maxBuf is racy with cifs_reconnect - need to store value - * and check it for zero before using. + * and check it before using. */ max_buf = tcon->ses->server->maxBuf; - if (!max_buf) { + if (max_buf < (sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE))) { free_xid(xid); return -EINVAL; } @@ -1476,10 +1476,10 @@ cifs_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock, /* * Accessing maxBuf is racy with cifs_reconnect - need to store value - * and check it for zero before using. + * and check it before using. */ max_buf = tcon->ses->server->maxBuf; - if (!max_buf) + if (max_buf < (sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE))) return -EINVAL; BUILD_BUG_ON(sizeof(struct smb_hdr) + sizeof(LOCKING_ANDX_RANGE) > diff --git a/fs/cifs/smb2file.c b/fs/cifs/smb2file.c index eff01ed6db0a..b204e84b87fb 100644 --- a/fs/cifs/smb2file.c +++ b/fs/cifs/smb2file.c @@ -122,10 +122,10 @@ smb2_unlock_range(struct cifsFileInfo *cfile, struct file_lock *flock, /* * Accessing maxBuf is racy with cifs_reconnect - need to store value - * and check it for zero before using. + * and check it before using. */ max_buf = tcon->ses->server->maxBuf; - if (!max_buf) + if (max_buf < sizeof(struct smb2_lock_element)) return -EINVAL; BUILD_BUG_ON(sizeof(struct smb2_lock_element) > PAGE_SIZE); From 8a26f0f781f56d3016b34a2217e346973d067e7b Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 3 Jan 2019 16:45:27 -0800 Subject: [PATCH 228/246] CIFS: Fix credits calculation for cancelled requests If a request is cancelled, we can't assume that the server returns 1 credit back. Instead we need to wait for a response and process the number of credits granted by the server. Create a separate mid callback for cancelled request, parse the number of credits in a response buffer and add them to the client's credits. If the didn't get a response (no response buffer available) assume 0 credits granted. The latter most probably happens together with session reconnect, so the client's credits are adjusted anyway. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 1 + fs/cifs/transport.c | 28 ++++++++++++++++++++++++++-- 2 files changed, 27 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 01ded7038b19..770926877b7c 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1438,6 +1438,7 @@ struct mid_q_entry { int mid_state; /* wish this were enum but can not pass to wait_event */ unsigned int mid_flags; __le16 command; /* smb command code */ + unsigned int optype; /* operation type */ bool large_buf:1; /* if valid response, is pointer to large buf */ bool multiRsp:1; /* multiple trans2 responses for one request */ bool multiEnd:1; /* both received */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index aaff9c5aab3d..450c43494324 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -787,6 +787,24 @@ cifs_noop_callback(struct mid_q_entry *mid) { } +static void +cifs_cancelled_callback(struct mid_q_entry *mid) +{ + struct TCP_Server_Info *server = mid->server; + unsigned int optype = mid->optype; + unsigned int credits_received = 0; + + if (mid->mid_state == MID_RESPONSE_RECEIVED) { + if (mid->resp_buf) + credits_received = server->ops->get_credits(mid); + else + cifs_dbg(FYI, "Bad state for cancelled MID\n"); + } + + DeleteMidQEntry(mid); + add_credits(server, credits_received, optype); +} + int compound_send_recv(const unsigned int xid, struct cifs_ses *ses, const int flags, const int num_rqst, struct smb_rqst *rqst, @@ -862,6 +880,7 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, } midQ[i]->mid_state = MID_REQUEST_SUBMITTED; + midQ[i]->optype = optype; /* * We don't invoke the callback compounds unless it is the last * request. @@ -896,15 +915,20 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, for (i = 0; i < num_rqst; i++) { rc = wait_for_response(ses->server, midQ[i]); - if (rc != 0) { + if (rc != 0) + break; + } + if (rc != 0) { + for (; i < num_rqst; i++) { cifs_dbg(VFS, "Cancelling wait for mid %llu cmd: %d\n", midQ[i]->mid, le16_to_cpu(midQ[i]->command)); send_cancel(ses->server, &rqst[i], midQ[i]); spin_lock(&GlobalMid_Lock); if (midQ[i]->mid_state == MID_REQUEST_SUBMITTED) { midQ[i]->mid_flags |= MID_WAIT_CANCELLED; - midQ[i]->callback = DeleteMidQEntry; + midQ[i]->callback = cifs_cancelled_callback; cancelled_mid[i] = true; + credits[i] = 0; } spin_unlock(&GlobalMid_Lock); } From ee258d79159afed52ca9372aeb9c1a51e89b32ee Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 3 Jan 2019 15:53:10 -0800 Subject: [PATCH 229/246] CIFS: Move credit processing to mid callbacks for SMB3 Currently we account for credits in the thread initiating a request and waiting for a response. The demultiplex thread receives the response, wakes up the thread and the latter collects credits from the response buffer and add them to the server structure on the client. This approach is not accurate, because it may race with reconnect events in the demultiplex thread which resets the number of credits. Fix this by moving credit processing to new mid callbacks that collect credits granted by the server from the response in the demultiplex thread. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/transport.c | 51 ++++++++++++++++++++++++++++++--------------- 1 file changed, 34 insertions(+), 17 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 450c43494324..202e0e84efdd 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -783,12 +783,7 @@ cifs_setup_request(struct cifs_ses *ses, struct smb_rqst *rqst) } static void -cifs_noop_callback(struct mid_q_entry *mid) -{ -} - -static void -cifs_cancelled_callback(struct mid_q_entry *mid) +cifs_compound_callback(struct mid_q_entry *mid) { struct TCP_Server_Info *server = mid->server; unsigned int optype = mid->optype; @@ -801,10 +796,23 @@ cifs_cancelled_callback(struct mid_q_entry *mid) cifs_dbg(FYI, "Bad state for cancelled MID\n"); } - DeleteMidQEntry(mid); add_credits(server, credits_received, optype); } +static void +cifs_compound_last_callback(struct mid_q_entry *mid) +{ + cifs_compound_callback(mid); + cifs_wake_up_task(mid); +} + +static void +cifs_cancelled_callback(struct mid_q_entry *mid) +{ + cifs_compound_callback(mid); + DeleteMidQEntry(mid); +} + int compound_send_recv(const unsigned int xid, struct cifs_ses *ses, const int flags, const int num_rqst, struct smb_rqst *rqst, @@ -882,11 +890,14 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, midQ[i]->mid_state = MID_REQUEST_SUBMITTED; midQ[i]->optype = optype; /* - * We don't invoke the callback compounds unless it is the last - * request. + * Invoke callback for every part of the compound chain + * to calculate credits properly. Wake up this thread only when + * the last element is received. */ if (i < num_rqst - 1) - midQ[i]->callback = cifs_noop_callback; + midQ[i]->callback = cifs_compound_callback; + else + midQ[i]->callback = cifs_compound_last_callback; } cifs_in_send_inc(ses->server); rc = smb_send_rqst(ses->server, num_rqst, rqst, flags); @@ -900,8 +911,20 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, mutex_unlock(&ses->server->srv_mutex); - if (rc < 0) + if (rc < 0) { + /* Sending failed for some reason - return credits back */ + for (i = 0; i < num_rqst; i++) + add_credits(ses->server, credits[i], optype); goto out; + } + + /* + * At this point the request is passed to the network stack - we assume + * that any credits taken from the server structure on the client have + * been spent and we can't return them back. Once we receive responses + * we will collect credits granted by the server in the mid callbacks + * and add those credits to the server structure. + */ /* * Compounding is never used during session establish. @@ -934,11 +957,6 @@ compound_send_recv(const unsigned int xid, struct cifs_ses *ses, } } - for (i = 0; i < num_rqst; i++) - if (!cancelled_mid[i] && midQ[i]->resp_buf - && (midQ[i]->mid_state == MID_RESPONSE_RECEIVED)) - credits[i] = ses->server->ops->get_credits(midQ[i]); - for (i = 0; i < num_rqst; i++) { if (rc < 0) goto out; @@ -997,7 +1015,6 @@ out: for (i = 0; i < num_rqst; i++) { if (!cancelled_mid[i]) cifs_delete_mid(midQ[i]); - add_credits(ses->server, credits[i], optype); } return rc; From 9a66396f1857cc1de06f4f4771797315e1a4ea56 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Tue, 8 Jan 2019 11:15:28 -0800 Subject: [PATCH 230/246] CIFS: Fix error paths in writeback code This patch aims to address writeback code problems related to error paths. In particular it respects EINTR and related error codes and stores and returns the first error occurred during writeback. Signed-off-by: Pavel Shilovsky Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 19 +++++++++++++++++++ fs/cifs/cifssmb.c | 7 ++++--- fs/cifs/file.c | 29 +++++++++++++++++++++++------ fs/cifs/inode.c | 10 ++++++++++ 4 files changed, 56 insertions(+), 9 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 770926877b7c..94dbdbe5be34 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -1575,6 +1575,25 @@ static inline void free_dfs_info_array(struct dfs_info3_param *param, kfree(param); } +static inline bool is_interrupt_error(int error) +{ + switch (error) { + case -EINTR: + case -ERESTARTSYS: + case -ERESTARTNOHAND: + case -ERESTARTNOINTR: + return true; + } + return false; +} + +static inline bool is_retryable_error(int error) +{ + if (is_interrupt_error(error) || error == -EAGAIN) + return true; + return false; +} + #define MID_FREE 0 #define MID_REQUEST_ALLOCATED 1 #define MID_REQUEST_SUBMITTED 2 diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 332f88d753d1..e18915415e13 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -2123,7 +2123,7 @@ cifs_writev_requeue(struct cifs_writedata *wdata) for (j = 0; j < nr_pages; j++) { unlock_page(wdata2->pages[j]); - if (rc != 0 && rc != -EAGAIN) { + if (rc != 0 && !is_retryable_error(rc)) { SetPageError(wdata2->pages[j]); end_page_writeback(wdata2->pages[j]); put_page(wdata2->pages[j]); @@ -2132,7 +2132,7 @@ cifs_writev_requeue(struct cifs_writedata *wdata) if (rc) { kref_put(&wdata2->refcount, cifs_writedata_release); - if (rc == -EAGAIN) + if (is_retryable_error(rc)) continue; break; } @@ -2141,7 +2141,8 @@ cifs_writev_requeue(struct cifs_writedata *wdata) i += nr_pages; } while (i < wdata->nr_pages); - mapping_set_error(inode->i_mapping, rc); + if (rc != 0 && !is_retryable_error(rc)) + mapping_set_error(inode->i_mapping, rc); kref_put(&wdata->refcount, cifs_writedata_release); } diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 5b6f8392d9db..2c7689f3998d 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -733,7 +733,8 @@ reopen_success: if (can_flush) { rc = filemap_write_and_wait(inode->i_mapping); - mapping_set_error(inode->i_mapping, rc); + if (!is_interrupt_error(rc)) + mapping_set_error(inode->i_mapping, rc); if (tcon->unix_ext) rc = cifs_get_inode_info_unix(&inode, full_path, @@ -2118,6 +2119,7 @@ static int cifs_writepages(struct address_space *mapping, pgoff_t end, index; struct cifs_writedata *wdata; int rc = 0; + int saved_rc = 0; unsigned int xid; /* @@ -2146,8 +2148,10 @@ retry: rc = server->ops->wait_mtu_credits(server, cifs_sb->wsize, &wsize, &credits); - if (rc) + if (rc != 0) { + done = true; break; + } tofind = min((wsize / PAGE_SIZE) - 1, end - index) + 1; @@ -2155,6 +2159,7 @@ retry: &found_pages); if (!wdata) { rc = -ENOMEM; + done = true; add_credits_and_wake_if(server, credits, 0); break; } @@ -2183,7 +2188,7 @@ retry: if (rc != 0) { add_credits_and_wake_if(server, wdata->credits, 0); for (i = 0; i < nr_pages; ++i) { - if (rc == -EAGAIN) + if (is_retryable_error(rc)) redirty_page_for_writepage(wbc, wdata->pages[i]); else @@ -2191,7 +2196,7 @@ retry: end_page_writeback(wdata->pages[i]); put_page(wdata->pages[i]); } - if (rc != -EAGAIN) + if (!is_retryable_error(rc)) mapping_set_error(mapping, rc); } kref_put(&wdata->refcount, cifs_writedata_release); @@ -2201,6 +2206,15 @@ retry: continue; } + /* Return immediately if we received a signal during writing */ + if (is_interrupt_error(rc)) { + done = true; + break; + } + + if (rc != 0 && saved_rc == 0) + saved_rc = rc; + wbc->nr_to_write -= nr_pages; if (wbc->nr_to_write <= 0) done = true; @@ -2218,6 +2232,9 @@ retry: goto retry; } + if (saved_rc != 0) + rc = saved_rc; + if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) mapping->writeback_index = index; @@ -2250,8 +2267,8 @@ cifs_writepage_locked(struct page *page, struct writeback_control *wbc) set_page_writeback(page); retry_write: rc = cifs_partialpagewrite(page, 0, PAGE_SIZE); - if (rc == -EAGAIN) { - if (wbc->sync_mode == WB_SYNC_ALL) + if (is_retryable_error(rc)) { + if (wbc->sync_mode == WB_SYNC_ALL && rc == -EAGAIN) goto retry_write; redirty_page_for_writepage(wbc, page); } else if (rc != 0) { diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 13fb59aadebc..478003644916 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -2257,6 +2257,11 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) * the flush returns error? */ rc = filemap_write_and_wait(inode->i_mapping); + if (is_interrupt_error(rc)) { + rc = -ERESTARTSYS; + goto out; + } + mapping_set_error(inode->i_mapping, rc); rc = 0; @@ -2400,6 +2405,11 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) * the flush returns error? */ rc = filemap_write_and_wait(inode->i_mapping); + if (is_interrupt_error(rc)) { + rc = -ERESTARTSYS; + goto cifs_setattr_exit; + } + mapping_set_error(inode->i_mapping, rc); rc = 0; From 48d2ba6257013676e57ff69444d5212031aee763 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 5 Jan 2019 19:46:35 -0600 Subject: [PATCH 231/246] cifs: update internal module version number To 2.16 Signed-off-by: Steve French --- fs/cifs/cifsfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 26776eddd85d..d1f9c2f3f575 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -150,5 +150,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* CONFIG_CIFS_NFSD_EXPORT */ -#define CIFS_VERSION "2.15" +#define CIFS_VERSION "2.16" #endif /* _CIFSFS_H */ From d3736d82e8169768218ee0ef68718875918091a0 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Wed, 9 Jan 2019 01:17:40 +0000 Subject: [PATCH 232/246] tty: Don't hold ldisc lock in tty_reopen() if ldisc present Try to get reference for ldisc during tty_reopen(). If ldisc present, we don't need to do tty_ldisc_reinit() and lock the write side for line discipline semaphore. Effectively, it optimizes fast-path for tty_reopen(), but more importantly it won't interrupt ongoing IO on the tty as no ldisc change is needed. Fixes user-visible issue when tty_reopen() interrupted login process for user with a long password, observed and reported by Lukas. Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending") Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()") Cc: Jiri Slaby Reported-by: Lukas F. Hartmann Tested-by: Lukas F. Hartmann Cc: stable Signed-off-by: Dmitry Safonov Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index bfe9ad85b362..23c6fd238422 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1256,7 +1256,8 @@ static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct * static int tty_reopen(struct tty_struct *tty) { struct tty_driver *driver = tty->driver; - int retval; + struct tty_ldisc *ld; + int retval = 0; if (driver->type == TTY_DRIVER_TYPE_PTY && driver->subtype == PTY_TYPE_MASTER) @@ -1268,13 +1269,18 @@ static int tty_reopen(struct tty_struct *tty) if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN)) return -EBUSY; - retval = tty_ldisc_lock(tty, 5 * HZ); - if (retval) - return retval; + ld = tty_ldisc_ref_wait(tty); + if (ld) { + tty_ldisc_deref(ld); + } else { + retval = tty_ldisc_lock(tty, 5 * HZ); + if (retval) + return retval; - if (!tty->ldisc) - retval = tty_ldisc_reinit(tty, tty->termios.c_line); - tty_ldisc_unlock(tty); + if (!tty->ldisc) + retval = tty_ldisc_reinit(tty, tty->termios.c_line); + tty_ldisc_unlock(tty); + } if (retval == 0) tty->count++; From d14eff1bc53e6a268c3b48da5cdb469f26832d1a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 26 Dec 2018 14:40:59 -0600 Subject: [PATCH 233/246] KVM: x86: Fix bit shifting in update_intel_pt_cfg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is being left shifted more than 32 bits, the behavior is undefined. Fix this by adding suffix ULL to integer 0xf. Addresses-Coverity-ID: 1476095 ("Bad bit shift operation") Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Wei Yang Reviewed-by: Luwei Kang Signed-off-by: Radim Krčmář --- arch/x86/kvm/vmx/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 4d39f731bc33..e344dc8626d0 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -7044,7 +7044,7 @@ static void update_intel_pt_cfg(struct kvm_vcpu *vcpu) /* unmask address range configure area */ for (i = 0; i < vmx->pt_desc.addr_range; i++) - vmx->pt_desc.ctl_bitmask &= ~(0xf << (32 + i * 4)); + vmx->pt_desc.ctl_bitmask &= ~(0xfULL << (32 + i * 4)); } static void vmx_cpuid_update(struct kvm_vcpu *vcpu) From 98938aa8edd66dc95024d7c936a4bc315f6615ff Mon Sep 17 00:00:00 2001 From: Tomas Bortoli Date: Wed, 2 Jan 2019 18:29:37 +0100 Subject: [PATCH 234/246] KVM: validate userspace input in kvm_clear_dirty_log_protect() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function at issue does not fully validate the content of the structure pointed by the log parameter, though its content has just been copied from userspace and lacks validation. Fix that. Moreover, change the type of n to unsigned long as that is the type returned by kvm_dirty_bitmap_bytes(). Signed-off-by: Tomas Bortoli Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com [Squashed the fix from Paolo. - Radim.] Signed-off-by: Radim Krčmář --- virt/kvm/kvm_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 1f888a103f78..5ecea812cb6a 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1227,9 +1227,9 @@ int kvm_clear_dirty_log_protect(struct kvm *kvm, { struct kvm_memslots *slots; struct kvm_memory_slot *memslot; - int as_id, id, n; + int as_id, id; gfn_t offset; - unsigned long i; + unsigned long i, n; unsigned long *dirty_bitmap; unsigned long *dirty_bitmap_buffer; @@ -1249,6 +1249,11 @@ int kvm_clear_dirty_log_protect(struct kvm *kvm, return -ENOENT; n = kvm_dirty_bitmap_bytes(memslot); + + if (log->first_page > memslot->npages || + log->num_pages > memslot->npages - log->first_page) + return -EINVAL; + *flush = false; dirty_bitmap_buffer = kvm_second_dirty_bitmap(memslot); if (copy_from_user(dirty_bitmap_buffer, log->dirty_bitmap, n)) From 3f14a89d1132dcae3c8ce6721c6ef51f6e6d9b5f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 2 Jan 2019 12:56:33 -0800 Subject: [PATCH 235/246] kvm: sev: Fail KVM_SEV_INIT if already initialized MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit By code inspection, it was found that multiple calls to KVM_SEV_INIT could deplete asid bits and overwrite kvm_sev_info's regions_list. Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this should likely be fixed anyway. This code is serialized by kvm->lock. Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command") Reported-by: Cfir Cohen Signed-off-by: David Rientjes Signed-off-by: Radim Krčmář --- arch/x86/kvm/svm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 307e5bddb6d9..a157ca5b6869 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -6278,6 +6278,9 @@ static int sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp) int asid, ret; ret = -EBUSY; + if (unlikely(sev->active)) + return ret; + asid = sev_asid_new(); if (asid < 0) return ret; From b7c1c226f9403c52bf58b0bceef24501429c7351 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Fri, 4 Jan 2019 15:20:44 +0800 Subject: [PATCH 236/246] KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "ret" is initialized to be ENOTSUPP. The return value of __hv_remote_flush_tlb_with_range() will be Or with "ret" when ept table potiners are mismatched. This will cause return ENOTSUPP even if flush tlb successfully. This patch is to fix the issue and set "ret" to 0. Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.") Signed-off-by: Lan Tianyu Signed-off-by: Radim Krčmář --- arch/x86/kvm/vmx/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index e344dc8626d0..f6915f10e584 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -453,7 +453,7 @@ static int hv_remote_flush_tlb_with_range(struct kvm *kvm, struct kvm_tlb_range *range) { struct kvm_vcpu *vcpu; - int ret = -ENOTSUPP, i; + int ret = 0, i; spin_lock(&to_kvm_vmx(kvm)->ept_pointer_lock); From cf1754c2a1d6e92688f7353aa7f598f5ad6d8f78 Mon Sep 17 00:00:00 2001 From: Christophe de Dinechin Date: Mon, 7 Jan 2019 18:52:38 +0100 Subject: [PATCH 237/246] Documentation/virtual/kvm: Update URL for AMD SEV API specification MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst is no longer valid, replaced space with underscore. Signed-off-by: Christophe de Dinechin Reviewed-by: Brijesh Singh Signed-off-by: Radim Krčmář --- Documentation/virtual/kvm/amd-memory-encryption.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/virtual/kvm/amd-memory-encryption.rst b/Documentation/virtual/kvm/amd-memory-encryption.rst index 71d6d257074f..659bbc093b52 100644 --- a/Documentation/virtual/kvm/amd-memory-encryption.rst +++ b/Documentation/virtual/kvm/amd-memory-encryption.rst @@ -242,6 +242,6 @@ References ========== .. [white-paper] http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf -.. [api-spec] http://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf +.. [api-spec] http://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf .. [amd-apm] http://support.amd.com/TechDocs/24593.pdf (section 15.34) .. [kvm-forum] http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf From 826c1362e79abcd36f99092acd083b5a2d576676 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 9 Jan 2019 18:22:56 +0100 Subject: [PATCH 238/246] x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when vmptr address is not backed is wrong, we end up advancing RIP twice. Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page") Reported-by: Cornelia Huck Signed-off-by: Vitaly Kuznetsov Reviewed-by: Sean Christopherson Reviewed-by: Cornelia Huck Signed-off-by: Radim Krčmář --- arch/x86/kvm/vmx/nested.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 3170e291215d..2616bd2c7f2c 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -4540,9 +4540,8 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu) * given physical address won't match the required * VMCS12_REVISION identifier. */ - nested_vmx_failValid(vcpu, + return nested_vmx_failValid(vcpu, VMXERR_VMPTRLD_INCORRECT_VMCS_REVISION_ID); - return kvm_skip_emulated_instruction(vcpu); } new_vmcs12 = kmap(page); if (new_vmcs12->hdr.revision_id != VMCS12_REVISION || From 49e54187ae0b2f9b5c0760e568a103baf4481610 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 4 Dec 2018 20:28:25 +0100 Subject: [PATCH 239/246] ata: libahci_platform: comply to PHY framework Current implementation of the libahci does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). PHYs should also be handled at suspend/resume time. For this, call ahci_platform_enable/disable_phys() at suspend/resume_host() time. These calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of the libahci driver must set manually in hpriv->flags at probe time. This is to avoid breaking users that have not been tested with this change. Reviewed-by: Hans de Goede Suggested-by: Grzegorz Jaszczyk Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe --- drivers/ata/ahci.h | 2 ++ drivers/ata/libahci_platform.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index ef356e70e6de..8810475f307a 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -254,6 +254,8 @@ enum { AHCI_HFLAG_IS_MOBILE = (1 << 25), /* mobile chipset, use SATA_MOBILE_LPM_POLICY as default lpm_policy */ + AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during + suspend/resume */ /* ap->flags bits */ diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 4b900fc659f7..81b1a3332ed6 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -56,6 +56,12 @@ static int ahci_platform_enable_phys(struct ahci_host_priv *hpriv) if (rc) goto disable_phys; + rc = phy_set_mode(hpriv->phys[i], PHY_MODE_SATA); + if (rc) { + phy_exit(hpriv->phys[i]); + goto disable_phys; + } + rc = phy_power_on(hpriv->phys[i]); if (rc) { phy_exit(hpriv->phys[i]); @@ -738,6 +744,9 @@ int ahci_platform_suspend_host(struct device *dev) writel(ctl, mmio + HOST_CTL); readl(mmio + HOST_CTL); /* flush */ + if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS) + ahci_platform_disable_phys(hpriv); + return ata_host_suspend(host, PMSG_SUSPEND); } EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); @@ -756,6 +765,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_suspend_host); int ahci_platform_resume_host(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; int rc; if (dev->power.power_state.event == PM_EVENT_SUSPEND) { @@ -766,6 +776,9 @@ int ahci_platform_resume_host(struct device *dev) ahci_init_controller(host); } + if (hpriv->flags & AHCI_HFLAG_SUSPEND_PHYS) + ahci_platform_enable_phys(hpriv); + ata_host_resume(host); return 0; From c9bc136791ba0eefe07ed57d3850b8c5cee6471b Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 4 Dec 2018 20:28:26 +0100 Subject: [PATCH 240/246] ata: ahci: mvebu: remove stale comment For Armada-38x (32-bit) SoCs, PM platform support has been added since: commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support") commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support") For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM platform support has always existed. There are even suspend/resume hooks in this driver since: commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Remove the stale comment at the end of this driver stating that all the above does not exist yet. Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe --- drivers/ata/ahci_mvebu.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index f9cb51be38eb..128d6f22926d 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -197,11 +197,6 @@ static const struct of_device_id ahci_mvebu_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); -/* - * We currently don't provide power management related operations, - * since there is no suspend/resume support at the platform level for - * Armada 38x for the moment. - */ static struct platform_driver ahci_mvebu_driver = { .probe = ahci_mvebu_probe, .remove = ata_platform_remove_one, From 96dbcb40e4b1a387cdb9b21f43638c759aebb5a4 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 4 Dec 2018 20:28:27 +0100 Subject: [PATCH 241/246] ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe --- drivers/ata/ahci_mvebu.c | 68 ++++++++++++++++++++++++++++++---------- 1 file changed, 51 insertions(+), 17 deletions(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 128d6f22926d..7839a5df1fd2 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -28,6 +28,10 @@ #define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4)) #define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4)) +struct ahci_mvebu_plat_data { + int (*plat_config)(struct ahci_host_priv *hpriv); +}; + static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, const struct mbus_dram_target_info *dram) { @@ -62,6 +66,22 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); } +static int ahci_mvebu_armada_380_config(struct ahci_host_priv *hpriv) +{ + const struct mbus_dram_target_info *dram; + int rc = 0; + + dram = mv_mbus_dram_info(); + if (dram) + ahci_mvebu_mbus_config(hpriv, dram); + else + rc = -ENODEV; + + ahci_mvebu_regret_option(hpriv); + + return rc; +} + /** * ahci_mvebu_stop_engine * @@ -126,13 +146,10 @@ static int ahci_mvebu_resume(struct platform_device *pdev) { struct ata_host *host = platform_get_drvdata(pdev); struct ahci_host_priv *hpriv = host->private_data; - const struct mbus_dram_target_info *dram; + const struct ahci_mvebu_plat_data *pdata = hpriv->plat_data; - dram = mv_mbus_dram_info(); - if (dram) - ahci_mvebu_mbus_config(hpriv, dram); - - ahci_mvebu_regret_option(hpriv); + if (pdata->plat_config) + pdata->plat_config(hpriv); return ahci_platform_resume_host(&pdev->dev); } @@ -154,28 +171,31 @@ static struct scsi_host_template ahci_platform_sht = { static int ahci_mvebu_probe(struct platform_device *pdev) { + const struct ahci_mvebu_plat_data *pdata; struct ahci_host_priv *hpriv; - const struct mbus_dram_target_info *dram; int rc; + pdata = of_device_get_match_data(&pdev->dev); + if (!pdata) + return -EINVAL; + hpriv = ahci_platform_get_resources(pdev, 0); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->plat_data = (void *)pdata; + rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; hpriv->stop_engine = ahci_mvebu_stop_engine; - if (of_device_is_compatible(pdev->dev.of_node, - "marvell,armada-380-ahci")) { - dram = mv_mbus_dram_info(); - if (!dram) - return -ENODEV; - - ahci_mvebu_mbus_config(hpriv, dram); - ahci_mvebu_regret_option(hpriv); + pdata = hpriv->plat_data; + if (pdata->plat_config) { + rc = pdata->plat_config(hpriv); + if (rc) + goto disable_resources; } rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, @@ -190,9 +210,23 @@ disable_resources: return rc; } +static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = { + .plat_config = ahci_mvebu_armada_380_config, +}; + +static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { + .plat_config = NULL, +}; + static const struct of_device_id ahci_mvebu_of_match[] = { - { .compatible = "marvell,armada-380-ahci", }, - { .compatible = "marvell,armada-3700-ahci", }, + { + .compatible = "marvell,armada-380-ahci", + .data = &ahci_mvebu_armada_380_plat_data, + }, + { + .compatible = "marvell,armada-3700-ahci", + .data = &ahci_mvebu_armada_3700_plat_data, + }, { }, }; MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); From 2f558bc3f33ca344489cec2218545741028b6a70 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 4 Dec 2018 20:28:28 +0100 Subject: [PATCH 242/246] ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM A3700 comphy initialization is done in the firmware (TF-A). Looking at the SATA PHY initialization routine, there is a comment about "vendor specific" registers. Two registers are mentioned. They are not initialized there in the firmware because they are AHCI related, while the firmware at this location does only PHY configuration. The solution to avoid doing such initialization is relying on U-Boot. While this work at boot time, U-Boot is definitely not going to run during a resume after suspending to RAM. Two possible solutions were considered: * Fixing the firmware. * Fixing the kernel driver. The first solution would take ages to propagate, while the second solution is easy to implement as the driver as been a little bit reworked to prepare for such platform configuration. Hence, this patch adds an Armada 3700 configuration function to set these two registers both at boot time (in the probe) and after a suspend (in the resume path). Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe --- drivers/ata/ahci_mvebu.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 7839a5df1fd2..bbab688d3c34 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -82,6 +82,19 @@ static int ahci_mvebu_armada_380_config(struct ahci_host_priv *hpriv) return rc; } +static int ahci_mvebu_armada_3700_config(struct ahci_host_priv *hpriv) +{ + u32 reg; + + writel(0, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR); + + reg = readl(hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); + reg |= BIT(6); + writel(reg, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); + + return 0; +} + /** * ahci_mvebu_stop_engine * @@ -148,8 +161,7 @@ static int ahci_mvebu_resume(struct platform_device *pdev) struct ahci_host_priv *hpriv = host->private_data; const struct ahci_mvebu_plat_data *pdata = hpriv->plat_data; - if (pdata->plat_config) - pdata->plat_config(hpriv); + pdata->plat_config(hpriv); return ahci_platform_resume_host(&pdev->dev); } @@ -191,12 +203,9 @@ static int ahci_mvebu_probe(struct platform_device *pdev) hpriv->stop_engine = ahci_mvebu_stop_engine; - pdata = hpriv->plat_data; - if (pdata->plat_config) { - rc = pdata->plat_config(hpriv); - if (rc) - goto disable_resources; - } + rc = pdata->plat_config(hpriv); + if (rc) + goto disable_resources; rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, &ahci_platform_sht); @@ -215,7 +224,7 @@ static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = { }; static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { - .plat_config = NULL, + .plat_config = ahci_mvebu_armada_3700_config, }; static const struct of_device_id ahci_mvebu_of_match[] = { From bde0b5c109e8b22b57745e3b9914f9e87ad857ea Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 4 Dec 2018 20:28:29 +0100 Subject: [PATCH 243/246] ata: ahci: mvebu: request PHY suspend/resume for Armada 3700 A feature has been added in the libahci driver: the possibility to set a new flag in hpriv->flags to let the core handle PHY suspend/resume automatically. Make use of this feature to make suspend to RAM work with SATA drives on A3700. Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe --- drivers/ata/ahci_mvebu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index bbab688d3c34..d4bba3ace45d 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -30,6 +30,7 @@ struct ahci_mvebu_plat_data { int (*plat_config)(struct ahci_host_priv *hpriv); + unsigned int flags; }; static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, @@ -195,6 +196,7 @@ static int ahci_mvebu_probe(struct platform_device *pdev) if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->flags |= pdata->flags; hpriv->plat_data = (void *)pdata; rc = ahci_platform_enable_resources(hpriv); @@ -225,6 +227,7 @@ static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = { static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { .plat_config = ahci_mvebu_armada_3700_config, + .flags = AHCI_HFLAG_SUSPEND_PHYS, }; static const struct of_device_id ahci_mvebu_of_match[] = { From e1706720408e72fb883f6b151c2b3b23d8e7e5b2 Mon Sep 17 00:00:00 2001 From: John Hubbard Date: Sat, 12 Jan 2019 17:29:09 -0800 Subject: [PATCH 244/246] phy: fix build breakage: add PHY_MODE_SATA Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") Signed-off-by: John Hubbard Acked-by: Jens Axboe Acked-by: Olof Johansson Cc: Grzegorz Jaszczyk Cc: Miquel Raynal Cc: Hans de Goede Signed-off-by: Linus Torvalds --- drivers/phy/marvell/phy-berlin-sata.c | 5 +++-- include/linux/phy/phy.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/phy/marvell/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c index a91fc67fc4e0..d70ba9bc42d9 100644 --- a/drivers/phy/marvell/phy-berlin-sata.c +++ b/drivers/phy/marvell/phy-berlin-sata.c @@ -32,7 +32,7 @@ /* register 0x01 */ #define REF_FREF_SEL_25 BIT(0) -#define PHY_MODE_SATA (0x0 << 5) +#define PHY_BERLIN_MODE_SATA (0x0 << 5) /* register 0x02 */ #define USE_MAX_PLL_RATE BIT(12) @@ -102,7 +102,8 @@ static int phy_berlin_sata_power_on(struct phy *phy) /* set PHY mode and ref freq to 25 MHz */ phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01, - 0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA); + 0x00ff, + REF_FREF_SEL_25 | PHY_BERLIN_MODE_SATA); /* set PHY up to 6 Gbps */ phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25, diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index e8e118d70fd7..3f350e2749fe 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -42,6 +42,7 @@ enum phy_mode { PHY_MODE_PCIE, PHY_MODE_ETHERNET, PHY_MODE_MIPI_DPHY, + PHY_MODE_SATA }; /** From b7285b425318331c2de4af2a784a18e6dccef484 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonathan=20Neusch=C3=A4fer?= Date: Sat, 12 Jan 2019 18:14:30 +0100 Subject: [PATCH 245/246] kernel/sys.c: Clarify that UNAME26 does not generate unique versions anymore MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UNAME26 is a mechanism to report Linux's version as 2.6.x, for compatibility with old/broken software. Due to the way it is implemented, it would have to be updated after 5.0, to keep the resulting versions unique. Linus Torvalds argued: "Do we actually need this? I'd rather let it bitrot, and just let it return random versions. It will just start again at 2.4.60, won't it? Anybody who uses UNAME26 for a 5.x kernel might as well think it's still 4.x. The user space is so old that it can't possibly care about differences between 4.x and 5.x, can it? The only thing that matters is that it shows "2.4.", which it will do regardless" Signed-off-by: Jonathan Neuschäfer Signed-off-by: Linus Torvalds --- kernel/sys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sys.c b/kernel/sys.c index a48cbf1414b8..f7eb62eceb24 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1207,7 +1207,8 @@ DECLARE_RWSEM(uts_sem); /* * Work around broken programs that cannot handle "Linux 3.0". * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40 - * And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60. + * And we map 4.x and later versions to 2.6.60+x, so 4.0/5.0/6.0/... would be + * 2.6.60. */ static int override_release(char __user *release, size_t len) { From 1c7fc5cbc33980acd13d668f1c8f0313d6ae9fd8 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Jan 2019 10:41:12 +1200 Subject: [PATCH 246/246] Linux 5.0-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 8c55b6404e19..499b96810995 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Shy Crocodile # *DOCUMENTATION*