diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 19069feb196d..ff6cb9e4c381 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -117,6 +117,15 @@ config AHCI_DA850 If unsure, say N. +config AHCI_DM816 + tristate "DaVinci DM816 AHCI SATA support" + depends on ARCH_OMAP2PLUS + help + This option enables support for the DaVinci DM816 SoC's + onboard AHCI SATA controller. + + If unsure, say N. + config AHCI_ST tristate "ST AHCI SATA support" depends on ARCH_STI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index e29feb16bda1..3048cc100a46 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o obj-$(CONFIG_AHCI_BRCM) += ahci_brcm.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o +obj-$(CONFIG_AHCI_DM816) += ahci_dm816.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o obj-$(CONFIG_AHCI_OCTEON) += ahci_octeon.o diff --git a/drivers/ata/ahci_dm816.c b/drivers/ata/ahci_dm816.c new file mode 100644 index 000000000000..fbd827c3a75c --- /dev/null +++ b/drivers/ata/ahci_dm816.c @@ -0,0 +1,200 @@ +/* + * DaVinci DM816 AHCI SATA platform driver + * + * Copyright (C) 2017 BayLibre SAS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "ahci.h" + +#define AHCI_DM816_DRV_NAME "ahci-dm816" + +#define AHCI_DM816_PHY_ENPLL(x) ((x) << 0) +#define AHCI_DM816_PHY_MPY(x) ((x) << 1) +#define AHCI_DM816_PHY_LOS(x) ((x) << 12) +#define AHCI_DM816_PHY_RXCDR(x) ((x) << 13) +#define AHCI_DM816_PHY_RXEQ(x) ((x) << 16) +#define AHCI_DM816_PHY_TXSWING(x) ((x) << 23) + +#define AHCI_DM816_P0PHYCR_REG 0x178 +#define AHCI_DM816_P1PHYCR_REG 0x1f8 + +#define AHCI_DM816_PLL_OUT 1500000000LU + +static const unsigned long pll_mpy_table[] = { + 400, 500, 600, 800, 825, 1000, 1200, + 1250, 1500, 1600, 1650, 2000, 2200, 2500 +}; + +static int ahci_dm816_get_mpy_bits(unsigned long refclk_rate) +{ + unsigned long pll_multiplier; + int i; + + /* + * We need to determine the value of the multiplier (MPY) bits. + * In order to include the 8.25 multiplier we need to first divide + * the refclk rate by 100. + */ + pll_multiplier = AHCI_DM816_PLL_OUT / (refclk_rate / 100); + + for (i = 0; i < ARRAY_SIZE(pll_mpy_table); i++) { + if (pll_mpy_table[i] == pll_multiplier) + return i; + } + + /* + * We should have divided evenly - if not, return an invalid + * value. + */ + return -1; +} + +static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev) +{ + unsigned long refclk_rate; + int mpy; + u32 val; + + /* + * We should have been supplied two clocks: the functional and + * keep-alive clock and the external reference clock. We need the + * rate of the latter to calculate the correct value of MPY bits. + */ + if (!hpriv->clks[1]) { + dev_err(dev, "reference clock not supplied\n"); + return -EINVAL; + } + + refclk_rate = clk_get_rate(hpriv->clks[1]); + if ((refclk_rate % 100) != 0) { + dev_err(dev, "reference clock rate must be divisible by 100\n"); + return -EINVAL; + } + + mpy = ahci_dm816_get_mpy_bits(refclk_rate); + if (mpy < 0) { + dev_err(dev, "can't calculate the MPY bits value\n"); + return -EINVAL; + } + + /* Enable the PHY and configure the first HBA port. */ + val = AHCI_DM816_PHY_MPY(mpy) | AHCI_DM816_PHY_LOS(1) | + AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) | + AHCI_DM816_PHY_TXSWING(3) | AHCI_DM816_PHY_ENPLL(1); + writel(val, hpriv->mmio + AHCI_DM816_P0PHYCR_REG); + + /* Configure the second HBA port. */ + val = AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) | + AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3); + writel(val, hpriv->mmio + AHCI_DM816_P1PHYCR_REG); + + return 0; +} + +static int ahci_dm816_softreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + int pmp, ret; + + pmp = sata_srst_pmp(link); + + /* + * There's an issue with the SATA controller on DM816 SoC: if we + * enable Port Multiplier support, but the drive is connected directly + * to the board, it can't be detected. As a workaround: if PMP is + * enabled, we first call ahci_do_softreset() and pass it the result of + * sata_srst_pmp(). If this call fails, we retry with pmp = 0. + */ + ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); + if (pmp && ret == -EBUSY) + return ahci_do_softreset(link, class, 0, + deadline, ahci_check_ready); + + return ret; +} + +static struct ata_port_operations ahci_dm816_port_ops = { + .inherits = &ahci_platform_ops, + .softreset = ahci_dm816_softreset, +}; + +static const struct ata_port_info ahci_dm816_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_dm816_port_ops, +}; + +static struct scsi_host_template ahci_dm816_platform_sht = { + AHCI_SHT(AHCI_DM816_DRV_NAME), +}; + +static int ahci_dm816_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + int rc; + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + return rc; + + rc = ahci_dm816_phy_init(hpriv, dev); + if (rc) + goto disable_resources; + + rc = ahci_platform_init_host(pdev, hpriv, + &ahci_dm816_port_info, + &ahci_dm816_platform_sht); + if (rc) + goto disable_resources; + + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + + return rc; +} + +static SIMPLE_DEV_PM_OPS(ahci_dm816_pm_ops, + ahci_platform_suspend, + ahci_platform_resume); + +static const struct of_device_id ahci_dm816_of_match[] = { + { .compatible = "ti,dm816-ahci", }, + { }, +}; +MODULE_DEVICE_TABLE(of, ahci_dm816_of_match); + +static struct platform_driver ahci_dm816_driver = { + .probe = ahci_dm816_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = AHCI_DM816_DRV_NAME, + .of_match_table = ahci_dm816_of_match, + .pm = &ahci_dm816_pm_ops, + }, +}; +module_platform_driver(ahci_dm816_driver); + +MODULE_DESCRIPTION("DaVinci DM816 AHCI SATA platform driver"); +MODULE_AUTHOR("Bartosz Golaszewski "); +MODULE_LICENSE("GPL");