diff --git a/.gitignore b/.gitignore index a1dfd2acd9c3..97ba6b79834c 100644 --- a/.gitignore +++ b/.gitignore @@ -11,6 +11,7 @@ # .* *.a +*.asn1.[ch] *.bin *.bz2 *.c.[012]*.* @@ -22,6 +23,7 @@ *.gz *.i *.ko +*.lex.c *.ll *.lst *.lz4 @@ -37,6 +39,7 @@ *.so.dbg *.su *.symtypes +*.tab.[ch] *.tar *.xz Module.symvers @@ -129,7 +132,3 @@ all.config # Kdevelop4 *.kdev4 - -#Automatically generated by ASN.1 compiler -net/ipv4/netfilter/nf_nat_snmp_basic-asn1.c -net/ipv4/netfilter/nf_nat_snmp_basic-asn1.h diff --git a/Documentation/clk.txt b/Documentation/clk.txt index be909ed45970..511628bb3d3a 100644 --- a/Documentation/clk.txt +++ b/Documentation/clk.txt @@ -268,9 +268,19 @@ The common clock framework uses two global locks, the prepare lock and the enable lock. The enable lock is a spinlock and is held across calls to the .enable, -.disable and .is_enabled operations. Those operations are thus not allowed to -sleep, and calls to the clk_enable(), clk_disable() and clk_is_enabled() API -functions are allowed in atomic context. +.disable operations. Those operations are thus not allowed to sleep, +and calls to the clk_enable(), clk_disable() API functions are allowed in +atomic context. + +For clk_is_enabled() API, it is also designed to be allowed to be used in +atomic context. However, it doesn't really make any sense to hold the enable +lock in core, unless you want to do something else with the information of +the enable state with that lock held. Otherwise, seeing if a clk is enabled is +a one-shot read of the enabled state, which could just as easily change after +the function returns because the lock is released. Thus the user of this API +needs to handle synchronizing the read of the state with whatever they're +using it for to make sure that the enable state doesn't change during that +time. The prepare lock is a mutex and is held across calls to all other operations. All those operations are allowed to sleep, and calls to the corresponding API diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index ff335f8aeb39..92f30006adae 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -136,6 +136,19 @@ Sorting .. kernel-doc:: lib/list_sort.c :export: +Text Searching +-------------- + +.. kernel-doc:: lib/textsearch.c + :doc: ts_intro + +.. kernel-doc:: lib/textsearch.c + :export: + +.. kernel-doc:: include/linux/textsearch.h + :functions: textsearch_find textsearch_next \ + textsearch_get_pattern textsearch_get_pattern_len + UUID/GUID --------- diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index 9b8f578d5e19..34a69ba67f13 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -6,6 +6,7 @@ The MediaTek AUDSYS controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt2701-audsys", "syscon" - "mediatek,mt7622-audsys", "syscon" - #clock-cells: Must be 1 @@ -13,10 +14,19 @@ The AUDSYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt The available clocks are defined in dt-bindings/clock/mt*-clk.h. +Required sub-nodes: +------- +For common binding part and usage, refer to +../sonud/mt2701-afe-pcm.txt. + Example: -audsys: audsys@11220000 { - compatible = "mediatek,mt7622-audsys", "syscon"; - reg = <0 0x11220000 0 0x1000>; - #clock-cells = <1>; -}; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + ... + }; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt new file mode 100644 index 000000000000..fee849d5fdd1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt @@ -0,0 +1,36 @@ +* Clock bindings for Freescale i.MX6 SLL + +Required properties: +- compatible: Should be "fsl,imx6sll-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h +for the full list of i.MX6 SLL clock IDs. + +Examples: + +#include + +clks: clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; +}; + +uart1: serial@2020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; +}; diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt new file mode 100644 index 000000000000..9f4ec5cb5c6b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/intc_stratix10.txt @@ -0,0 +1,20 @@ +Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be + "intel,stratix10-clkmgr" + +- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock. + +- #clock-cells : from common clock binding, shall be set to 1. + +Example: + clkmgr: clock-controller@ffd10000 { + compatible = "intel,stratix10-clkmgr"; + reg = <0xffd10000 0x1000>; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index f1890d0777a6..773a5226342f 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -22,7 +22,9 @@ Required Properties: - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) + - "renesas,r8a77965-cpg-mssr" for the r8a77965 SoC (R-Car M3-N) - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) + - "renesas,r8a77980-cpg-mssr" for the r8a77980 SoC (R-Car V3H) - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - reg: Base address and length of the memory resource used by the CPG/MSSR @@ -32,8 +34,8 @@ Required Properties: clock-names - clock-names: List of external parent clock names. Valid names are: - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, - r8a7795, r8a7796, r8a77970, r8a77995) - - "extalr" (r8a7795, r8a7796, r8a77970) + r8a7795, r8a7796, r8a77965, r8a77970, r8a77980, r8a77995) + - "extalr" (r8a7795, r8a7796, r8a77965, r8a77970, r8a77980) - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt index e71c675ba5da..904ae682ea90 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt @@ -32,6 +32,7 @@ clock-output-names: - "clkin_i2s" - external I2S clock - optional, - "gmac_clkin" - external GMAC clock - optional - "phy_50m_out" - output clock of the pll in the mac phy + - "hdmi_phy" - output clock of the hdmi phy pll - optional Example: Clock controller node: diff --git a/Documentation/devicetree/bindings/clock/silabs,si544.txt b/Documentation/devicetree/bindings/clock/silabs,si544.txt new file mode 100644 index 000000000000..b86535b80920 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si544.txt @@ -0,0 +1,25 @@ +Binding for Silicon Labs 544 programmable I2C clock generator. + +Reference +This binding uses the common clock binding[1]. Details about the device can be +found in the datasheet[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si544 datasheet + https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf + +Required properties: + - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according + to the speed grade of the chip. + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si544". + +Example: + si544: clock-controller@55 { + reg = <0x55>; + #clock-cells = <0>; + compatible = "silabs,si544b"; + }; diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt new file mode 100644 index 000000000000..fb9495ea582c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt @@ -0,0 +1,60 @@ +STMicroelectronics STM32 Peripheral Reset Clock Controller +========================================================== + +The RCC IP is both a reset and a clock controller. + +RCC makes also power management (resume/supend and wakeup interrupt). + +Please also refer to reset.txt for common reset controller binding usage. + +Please also refer to clock-bindings.txt for common clock controller +binding usage. + + +Required properties: +- compatible: "st,stm32mp1-rcc", "syscon" +- reg: should be register base and length as documented in the datasheet +- #clock-cells: 1, device nodes should specify the clock in their + "clocks" property, containing a phandle to the clock device node, + an index specifying the clock to use. +- #reset-cells: Shall be 1 +- interrupts: Should contain a general interrupt line and a interrupt line + to the wake-up of processor (CSTOP). + +Example: + rcc: rcc@50000000 { + compatible = "st,stm32mp1-rcc", "syscon"; + reg = <0x50000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + interrupts = , + ; + }; + +Specifying clocks +================= + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/stm32mp1-clks.h header and can be used in device +tree sources. + +Specifying softreset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the reset device node and an index specifying +which channel to use. +The index is the bit number within the RCC registers bank, starting from RCC +base address. +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register. + +For example on STM32MP1, for LTDC reset: + ltdc = APB4_RSTSETR_offset / 4 * 32 + LTDC_bit_offset + = 0x180 / 4 * 32 + 0 = 3072 + +The list of valid indices for STM32MP1 is available in: +include/dt-bindings/reset-controller/stm32mp1-resets.h + +This file implements defines like: +#define LTDC_R 3072 diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 4ca21c3a6fc9..460ef27b1008 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -20,6 +20,7 @@ Required properties : - "allwinner,sun50i-a64-ccu" - "allwinner,sun50i-a64-r-ccu" - "allwinner,sun50i-h5-ccu" + - "allwinner,sun50i-h6-ccu" - "nextthing,gr8-ccu" - reg: Must contain the registers base address and length @@ -31,6 +32,9 @@ Required properties : - #clock-cells : must contain 1 - #reset-cells : must contain 1 +For the main CCU on H6, one more clock is needed: +- "iosc": the SoC's internal frequency oscillator + For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: - "pll-periph": the SoC's peripheral PLL from the main CCU - "iosc": the SoC's internal frequency oscillator diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt new file mode 100644 index 000000000000..1e03dce99a8f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/davinci/da8xx-cfgchip.txt @@ -0,0 +1,93 @@ +Binding for TI DA8XX/OMAP-L13X/AM17XX/AM18XX CFGCHIP clocks + +TI DA8XX/OMAP-L13X/AM17XX/AM18XX SoCs contain a general purpose set of +registers call CFGCHIPn. Some of these registers function as clock +gates. This document describes the bindings for those clocks. + +All of the clock nodes described below must be child nodes of a CFGCHIP node +(compatible = "ti,da830-cfgchip"). + +USB PHY clocks +-------------- +Required properties: +- compatible: shall be "ti,da830-usb-phy-clocks". +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: phandles to the parent clocks corresponding to clock-names +- clock-names: shall be "fck", "usb_refclkin", "auxclk" + +This node provides two clocks. The clock at index 0 is the USB 2.0 PHY 48MHz +clock and the clock at index 1 is the USB 1.1 PHY 48MHz clock. + +eHRPWM Time Base Clock (TBCLK) +------------------------------ +Required properties: +- compatible: shall be "ti,da830-tbclksync". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandle to the parent clock +- clock-names: shall be "fck" + +PLL DIV4.5 divider +------------------ +Required properties: +- compatible: shall be "ti,da830-div4p5ena". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandle to the parent clock +- clock-names: shall be "pll0_pllout" + +EMIFA clock source (ASYNC1) +--------------------------- +Required properties: +- compatible: shall be "ti,da850-async1-clksrc". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandles to the parent clocks corresponding to clock-names +- clock-names: shall be "pll0_sysclk3", "div4.5" + +ASYNC3 clock source +------------------- +Required properties: +- compatible: shall be "ti,da850-async3-clksrc". +- #clock-cells: from common clock binding; shall be set to 0. +- clocks: phandles to the parent clocks corresponding to clock-names +- clock-names: shall be "pll0_sysclk2", "pll1_sysclk2" + +Examples: + + cfgchip: syscon@1417c { + compatible = "ti,da830-cfgchip", "syscon", "simple-mfd"; + reg = <0x1417c 0x14>; + + usb_phy_clk: usb-phy-clocks { + compatible = "ti,da830-usb-phy-clocks"; + #clock-cells = <1>; + clocks = <&psc1 1>, <&usb_refclkin>, <&pll0_auxclk>; + clock-names = "fck", "usb_refclkin", "auxclk"; + }; + ehrpwm_tbclk: ehrpwm_tbclk { + compatible = "ti,da830-tbclksync"; + #clock-cells = <0>; + clocks = <&psc1 17>; + clock-names = "fck"; + }; + div4p5_clk: div4.5 { + compatible = "ti,da830-div4p5ena"; + #clock-cells = <0>; + clocks = <&pll0_pllout>; + clock-names = "pll0_pllout"; + }; + async1_clk: async1 { + compatible = "ti,da850-async1-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 3>, <&div4p5_clk>; + clock-names = "pll0_sysclk3", "div4.5"; + }; + async3_clk: async3 { + compatible = "ti,da850-async3-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>; + clock-names = "pll0_sysclk2", "pll1_sysclk2"; + }; + }; + +Also see: +- Documentation/devicetree/bindings/clock/clock-bindings.txt + diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt new file mode 100644 index 000000000000..36998e184821 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt @@ -0,0 +1,96 @@ +Binding for TI DaVinci PLL Controllers + +The PLL provides clocks to most of the components on the SoC. In addition +to the PLL itself, this controller also contains bypasses, gates, dividers, +an multiplexers for various clock signals. + +Required properties: +- compatible: shall be one of: + - "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX + - "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX +- reg: physical base address and size of the controller's register area. +- clocks: phandles corresponding to the clock names +- clock-names: names of the clock sources - depends on compatible string + - for "ti,da850-pll0", shall be "clksrc", "extclksrc" + - for "ti,da850-pll1", shall be "clksrc" + +Optional properties: +- ti,clkmode-square-wave: Indicates that the the board is supplying a square + wave input on the OSCIN pin instead of using a crystal oscillator. + This property is only valid when compatible = "ti,da850-pll0". + + +Optional child nodes: + +pllout + Describes the main PLL clock output (before POSTDIV). The node name must + be "pllout". + + Required properties: + - #clock-cells: shall be 0 + +sysclk + Describes the PLLDIVn divider clocks that provide the SYSCLKn clock + domains. The node name must be "sysclk". Consumers of this node should + use "n" in "SYSCLKn" as the index parameter for the clock cell. + + Required properties: + - #clock-cells: shall be 1 + +auxclk + Describes the AUXCLK output of the PLL. The node name must be "auxclk". + This child node is only valid when compatible = "ti,da850-pll0". + + Required properties: + - #clock-cells: shall be 0 + +obsclk + Describes the OBSCLK output of the PLL. The node name must be "obsclk". + + Required properties: + - #clock-cells: shall be 0 + + +Examples: + + pll0: clock-controller@11000 { + compatible = "ti,da850-pll0"; + reg = <0x11000 0x1000>; + clocks = <&ref_clk>, <&pll1_sysclk 3>; + clock-names = "clksrc", "extclksrc"; + ti,clkmode-square-wave; + + pll0_pllout: pllout { + #clock-cells = <0>; + }; + + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + + pll0_auxclk: auxclk { + #clock-cells = <0>; + }; + + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; + + pll1: clock-controller@21a000 { + compatible = "ti,da850-pll1"; + reg = <0x21a000 0x1000>; + clocks = <&ref_clk>; + clock-names = "clksrc"; + + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; + +Also see: +- Documentation/devicetree/bindings/clock/clock-bindings.txt diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt new file mode 100644 index 000000000000..dae4ad8e198c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/davinci/psc.txt @@ -0,0 +1,71 @@ +Binding for TI DaVinci Power Sleep Controller (PSC) + +The PSC provides power management, clock gating and reset functionality. It is +primarily used for clocking. + +Required properties: +- compatible: shall be one of: + - "ti,da850-psc0" for PSC0 on DA850/OMAP-L138/AM18XX + - "ti,da850-psc1" for PSC1 on DA850/OMAP-L138/AM18XX +- reg: physical base address and size of the controller's register area +- #clock-cells: from common clock binding; shall be set to 1 +- #power-domain-cells: from generic power domain binding; shall be set to 1. +- clocks: phandles to clocks corresponding to the clock-names property +- clock-names: list of parent clock names - depends on compatible value + - for "ti,da850-psc0", shall be "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", "async1" + - for "ti,da850-psc1", shall be "pll0_sysclk2", "pll0_sysclk4", "async3" + +Optional properties: +- #reset-cells: from reset binding; shall be set to 1 - only applicable when + at least one local domain provides a local reset. + +Consumers: + + Clock, power domain and reset consumers shall use the local power domain + module ID (LPSC) as the index corresponding to the clock cell. Refer to + the device-specific datasheet to find these numbers. NB: Most local + domains only provide a clock/power domain and not a reset. + +Examples: + + psc0: clock-controller@10000 { + compatible = "ti,da850-psc0"; + reg = <0x10000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, + <&pll0_sysclk 4>, <&pll0_sysclk 6>, <&async1_clk>; + clock_names = "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", "async1"; + }; + psc1: clock-controller@227000 { + compatible = "ti,da850-psc1"; + reg = <0x227000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, <&async3_clk>; + clock_names = "pll0_sysclk2", "pll0_sysclk4", "async3"; + }; + + /* consumer */ + dsp: dsp@11800000 { + compatible = "ti,da850-dsp"; + reg = <0x11800000 0x40000>, + <0x11e00000 0x8000>, + <0x11f00000 0x8000>, + <0x01c14044 0x4>, + <0x01c14174 0x8>; + reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; + interrupt-parent = <&intc>; + interrupts = <28>; + clocks = <&psc0 15>; + power-domains = <&psc0 15>; + resets = <&psc0 15>; + }; + +Also see: +- Documentation/devicetree/bindings/clock/clock-bindings.txt +- Documentation/devicetree/bindings/power/power_domain.txt +- Documentation/devicetree/bindings/reset/reset.txt diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt index 35a6f5c7e5c2..9b13b32974f9 100644 --- a/Documentation/devicetree/bindings/clock/ti/divider.txt +++ b/Documentation/devicetree/bindings/clock/ti/divider.txt @@ -75,6 +75,9 @@ Optional properties: - ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0, see [2] - ti,set-rate-parent : clk_set_rate is propagated to parent +- ti,latch-bit : latch the divider value to HW, only needed if the register + access requires this. As an example dra76x DPLL_GMAC H14 divider implements + such behavior. Examples: dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index 2d0d170f8001..eec8994b9be8 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -48,6 +48,9 @@ Optional properties: zero - ti,set-rate-parent : clk_set_rate is propagated to parent clock, not supported by the composite-mux-clock subtype +- ti,latch-bit : latch the mux value to HW, only needed if the register + access requires this. As an example, dra7x DPLL_GMAC H14 muxing + implements such behavior. Examples: diff --git a/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt new file mode 100644 index 000000000000..7d9d3f90641b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt @@ -0,0 +1,25 @@ +Ingenic JZ47xx PWM Controller +============================= + +Required properties: +- compatible: One of: + * "ingenic,jz4740-pwm" + * "ingenic,jz4770-pwm" + * "ingenic,jz4780-pwm" +- #pwm-cells: Should be 3. See pwm.txt in this directory for a description + of the cells format. +- clocks : phandle to the external clock. +- clock-names : Should be "ext". + + +Example: + + pwm: pwm@10002000 { + compatible = "ingenic,jz4740-pwm"; + reg = <0x10002000 0x1000>; + + #pwm-cells = <3>; + + clocks = <&ext>; + clock-names = "ext"; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt index f8338d11fd2b..bd23302e84be 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-stm32-lp.txt @@ -7,6 +7,8 @@ See ../mfd/stm32-lptimer.txt for details about the parent node. Required parameters: - compatible: Must be "st,stm32-pwm-lp". +- #pwm-cells: Should be set to 3. This PWM chip uses the default 3 cells + bindings defined in pwm.txt. Optional properties: - pinctrl-names: Set to "default". @@ -18,6 +20,7 @@ Example: ... pwm { compatible = "st,stm32-pwm-lp"; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&lppwm1_pins>; }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index 51ff54c8b8ef..2a1affbff45e 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -7,6 +7,8 @@ Required properties: - "allwinner,sun5i-a13-pwm" - "allwinner,sun7i-a20-pwm" - "allwinner,sun8i-h3-pwm" + - "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm" + - "allwinner,sun50i-h5-pwm", "allwinner,sun5i-a13-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: should be 3. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt index 74c118015980..35a3b9761ee5 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -2,6 +2,8 @@ Required Properties: - compatible: should be "renesas,pwm-rcar" and one of the following. + - "renesas,pwm-r8a7743": for RZ/G1M + - "renesas,pwm-r8a7745": for RZ/G1E - "renesas,pwm-r8a7778": for R-Car M1A - "renesas,pwm-r8a7779": for R-Car H1 - "renesas,pwm-r8a7790": for R-Car H2 @@ -9,6 +11,7 @@ Required Properties: - "renesas,pwm-r8a7794": for R-Car E2 - "renesas,pwm-r8a7795": for R-Car H3 - "renesas,pwm-r8a7796": for R-Car M3-W + - "renesas,pwm-r8a77965": for R-Car M3-N - "renesas,pwm-r8a77995": for R-Car D3 - reg: base address and length of the registers block for the PWM. - #pwm-cells: should be 2. See pwm.txt in this directory for a description of @@ -17,13 +20,15 @@ Required Properties: - pinctrl-0: phandle, referring to a default pin configuration node. - pinctrl-names: Set to "default". -Example: R8A7790 (R-Car H2) PWM Timer node +Example: R8A7743 (RZ/G1M) PWM Timer node pwm0: pwm@e6e30000 { - compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; - clocks = <&mstp5_clks R8A7790_CLK_PWM>; pinctrl-0 = <&pwm0_pins>; pinctrl-names = "default"; }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt index 1aadc804dae4..d53a16715da6 100644 --- a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.txt @@ -3,10 +3,12 @@ Required Properties: - compatible: should be one of the following. - - "renesas,tpu-r8a73a4": for R8A77A4 (R-Mobile APE6) compatible PWM controller. + - "renesas,tpu-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible PWM controller. - "renesas,tpu-r8a7740": for R8A7740 (R-Mobile A1) compatible PWM controller. + - "renesas,tpu-r8a7743": for R8A7743 (RZ/G1M) compatible PWM controller. + - "renesas,tpu-r8a7745": for R8A7745 (RZ/G1E) compatible PWM controller. - "renesas,tpu-r8a7790": for R8A7790 (R-Car H2) compatible PWM controller. - - "renesas,tpu": for generic R-Car TPU PWM controller. + - "renesas,tpu": for generic R-Car and RZ/G1 TPU PWM controller. - reg: Base address and length of each memory resource used by the PWM controller hardware module. @@ -18,10 +20,10 @@ Required Properties: Please refer to pwm.txt in this directory for details of the common PWM bindings used by client devices. -Example: R8A7740 (R-Car A1) TPU controller node +Example: R8A7740 (R-Mobile A1) TPU controller node tpu: pwm@e6600000 { compatible = "renesas,tpu-r8a7740", "renesas,tpu"; - reg = <0xe6600000 0x100>; + reg = <0xe6600000 0x148>; #pwm-cells = <3>; }; diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index 1b596fd38dc4..b957acff57aa 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -49,19 +49,6 @@ on the SoC (only first trip points defined in DT will be configured): - samsung,exynos5433-tmu: 8 - samsung,exynos7-tmu: 8 -Following properties are mandatory (depending on SoC): -- samsung,tmu_gain: Gain value for internal TMU operation. -- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage -- samsung,tmu_noise_cancel_mode: Mode for noise cancellation -- samsung,tmu_efuse_value: Default level of temperature - it is needed when - in factory fusing produced wrong value -- samsung,tmu_min_efuse_value: Minimum temperature fused value -- samsung,tmu_max_efuse_value: Maximum temperature fused value -- samsung,tmu_first_point_trim: First point trimming value -- samsung,tmu_second_point_trim: Second point trimming value -- samsung,tmu_default_temp_offset: Default temperature offset -- samsung,tmu_cal_type: Callibration type - ** Optional properties: - vtmu-supply: This entry is optional and provides the regulator node supplying @@ -78,7 +65,7 @@ Example 1): clocks = <&clock 383>; clock-names = "tmu_apbif"; vtmu-supply = <&tmu_regulator_node>; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 2): @@ -89,7 +76,7 @@ Example 2): interrupts = <0 58 0>; clocks = <&clock 21>; clock-names = "tmu_apbif"; - #include "exynos5440-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") @@ -99,7 +86,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 184 0>; clocks = <&clock 318>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_cpu3: tmu@1006c000 { @@ -108,7 +95,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 185 0>; clocks = <&clock 318>, <&clock 319>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; tmu_gpu: tmu@100a0000 { @@ -117,7 +104,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register") interrupts = <0 215 0>; clocks = <&clock 319>, <&clock 318>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" + #thermal-sensor-cells = <0>; }; Note: For multi-instance tmu each instance should have an alias correctly diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index 1719d47a5e2f..cc553f0952c5 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -55,8 +55,7 @@ of heat dissipation). For example a fan's cooling states correspond to the different fan speeds possible. Cooling states are referred to by single unsigned integers, where larger numbers mean greater heat dissipation. The precise set of cooling states associated with a device -(as referred to by the cooling-min-level and cooling-max-level -properties) should be defined in a particular device's binding. +should be defined in a particular device's binding. For more examples of cooling devices, refer to the example sections below. Required properties: @@ -69,15 +68,6 @@ Required properties: See Cooling device maps section below for more details on how consumers refer to cooling devices. -Optional properties: -- cooling-min-level: An integer indicating the smallest - Type: unsigned cooling state accepted. Typically 0. - Size: one cell - -- cooling-max-level: An integer indicating the largest - Type: unsigned cooling state accepted. - Size: one cell - * Trip points The trip node is a node to describe a point in the temperature domain @@ -226,8 +216,6 @@ cpus { 396000 950000 198000 850000 >; - cooling-min-level = <0>; - cooling-max-level = <3>; #cooling-cells = <2>; /* min followed by max */ }; ... @@ -241,8 +229,6 @@ cpus { */ fan0: fan@48 { ... - cooling-min-level = <0>; - cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; }; diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt new file mode 100644 index 000000000000..ea22dfe485be --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -0,0 +1,21 @@ +Nuvoton NPCM7xx timer + +Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit +timer counters. + +Required properties: +- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. +- reg : Offset and length of the register set for the device. +- interrupts : Contain the timer interrupt with flags for + falling edge. +- clocks : phandle of timer reference clock (usually a 25 MHz clock). + +Example: + +timer@f0008000 { + compatible = "nuvoton,npcm750-timer"; + interrupts = ; + reg = <0xf0008000 0x50>; + clocks = <&clk NPCM7XX_CLK_TIMER>; +}; + diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt index b4aa7ddb5b13..f82087b220f4 100644 --- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt +++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt @@ -15,7 +15,7 @@ Required properties: - interrupts : Should be the clock event device interrupt. - clocks : The clocks provided by the SoC to drive the timer, must contain an entry for each entry in clock-names. -- clock-names : Must include the following entries: "igp" and "per". +- clock-names : Must include the following entries: "ipg" and "per". Example: tpm5: tpm@40260000 { diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt index 107280ef0025..adc6b76fcb3a 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt @@ -11,6 +11,7 @@ Optional properties: detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. - fsl,ext-reset-output: If present the watchdog device is configured to assert its external reset (WDOG_B) instead of issuing a software reset. +- timeout-sec : Contains the watchdog timeout in seconds Examples: @@ -19,4 +20,5 @@ wdt@73f98000 { reg = <0x73f98000 0x4000>; interrupts = <58>; big-endian; + timeout-sec = <20>; }; diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt index 8a6d84cb36c9..7588cc3971bf 100644 --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt @@ -9,9 +9,13 @@ Required properties: "amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example: wdt: watchdog@c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + timeout-sec = <10>; }; diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 5b38a30e608c..859dee167b91 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -11,9 +11,13 @@ Required properties: - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example: wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; + timeout-sec = <10>; }; diff --git a/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt new file mode 100644 index 000000000000..6d593003c933 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/nuvoton,npcm-wdt.txt @@ -0,0 +1,28 @@ +Nuvoton NPCM Watchdog + +Nuvoton NPCM timer module provides five 24-bit timer counters, and a watchdog. +The watchdog supports a pre-timeout interrupt that fires 10ms before the +expiry. + +Required properties: +- compatible : "nuvoton,npcm750-wdt" for NPCM750 (Poleg). +- reg : Offset and length of the register set for the device. +- interrupts : Contain the timer interrupt with flags for + falling edge. + +Required clocking property, have to be one of: +- clocks : phandle of timer reference clock. +- clock-frequency : The frequency in Hz of the clock that drives the NPCM7xx + timer (usually 25000000). + +Optional properties: +- timeout-sec : Contains the watchdog timeout in seconds + +Example: + +timer@f000801c { + compatible = "nuvoton,npcm750-wdt"; + interrupts = ; + reg = <0xf000801c 0x4>; + clocks = <&clk NPCM7XX_CLK_TIMER>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt index 9cbc76c89b2b..0dce5e3100b4 100644 --- a/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sirfsoc_wdt.txt @@ -5,10 +5,14 @@ Required properties: - reg: Address range of tick timer/WDT register set - interrupts: interrupt number to the cpu +Optional properties: +- timeout-sec : Contains the watchdog timeout in seconds + Example: timer@b0020000 { compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + timeout-sec = <30>; }; diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index 04fc368d828f..ed11ce0ac836 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -8,9 +8,13 @@ Required properties: "allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt" - reg : Specifies base physical address and size of the registers. +Optional properties: +- timeout-sec : Contains the watchdog timeout in seconds + Example: wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; + timeout-sec = <10>; }; diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt index c5254f6d234d..8c6ea7b41048 100644 --- a/Documentation/filesystems/afs.txt +++ b/Documentation/filesystems/afs.txt @@ -11,7 +11,7 @@ Contents: - Proc filesystem. - The cell database. - Security. - - Examples. + - The @sys substitution. ======== @@ -230,3 +230,29 @@ If a file is opened with a particular key and then the file descriptor is passed to a process that doesn't have that key (perhaps over an AF_UNIX socket), then the operations on the file will be made with key that was used to open the file. + + +===================== +THE @SYS SUBSTITUTION +===================== + +The list of up to 16 @sys substitutions for the current network namespace can +be configured by writing a list to /proc/fs/afs/sysname: + + [root@andromeda ~]# echo foo amd64_linux_26 >/proc/fs/afs/sysname + +or cleared entirely by writing an empty list: + + [root@andromeda ~]# echo >/proc/fs/afs/sysname + +The current list for current network namespace can be retrieved by: + + [root@andromeda ~]# cat /proc/fs/afs/sysname + foo + amd64_linux_26 + +When @sys is being substituted for, each element of the list is tried in the +order given. + +By default, the list will contain one item that conforms to the pattern +"_linux_26", amd64 being the name for x86_64. diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt index 1fb12f9dfe48..7059623635b2 100644 --- a/Documentation/filesystems/gfs2-glocks.txt +++ b/Documentation/filesystems/gfs2-glocks.txt @@ -100,14 +100,15 @@ indicates that it is caching uptodate data. Glock locking order within GFS2: - 1. i_mutex (if required) + 1. i_rwsem (if required) 2. Rename glock (for rename only) 3. Inode glock(s) (Parents before children, inodes at "same level" with same parent in lock number order) 4. Rgrp glock(s) (for (de)allocation operations) 5. Transaction glock (via gfs2_trans_begin) for non-read operations - 6. Page lock (always last, very important!) + 6. i_rw_mutex (if required) + 7. Page lock (always last, very important!) There are two glocks per inode. One deals with access to the inode itself (locking order as above), and the other, known as the iopen diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt index 6ea1e64d1464..961b287ef323 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.txt @@ -14,9 +14,13 @@ The result will inevitably fail to look exactly like a normal filesystem for various technical reasons. The expectation is that many use cases will be able to ignore these differences. -This approach is 'hybrid' because the objects that appear in the -filesystem do not all appear to belong to that filesystem. In many -cases an object accessed in the union will be indistinguishable + +Overlay objects +--------------- + +The overlay filesystem approach is 'hybrid', because the objects that +appear in the filesystem do not always appear to belong to that filesystem. +In many cases, an object accessed in the union will be indistinguishable from accessing the corresponding object from the original filesystem. This is most obvious from the 'st_dev' field returned by stat(2). @@ -34,6 +38,19 @@ make the overlay mount more compliant with filesystem scanners and overlay objects will be distinguishable from the corresponding objects in the original filesystem. +On 64bit systems, even if all overlay layers are not on the same +underlying filesystem, the same compliant behavior could be achieved +with the "xino" feature. The "xino" feature composes a unique object +identifier from the real object st_ino and an underlying fsid index. +If all underlying filesystems support NFS file handles and export file +handles with 32bit inode number encoding (e.g. ext4), overlay filesystem +will use the high inode number bits for fsid. Even when the underlying +filesystem uses 64bit inode numbers, users can still enable the "xino" +feature with the "-o xino=on" overlay mount option. That is useful for the +case of underlying filesystems like xfs and tmpfs, which use 64bit inode +numbers, but are very unlikely to use the high inode number bit. + + Upper and Lower --------------- @@ -290,10 +307,19 @@ Non-standard behavior --------------------- The copy_up operation essentially creates a new, identical file and -moves it over to the old name. The new file may be on a different -filesystem, so both st_dev and st_ino of the file may change. +moves it over to the old name. Any open files referring to this inode +will access the old data. -Any open files referring to this inode will access the old data. +The new file may be on a different filesystem, so both st_dev and st_ino +of the real file may change. The values of st_dev and st_ino returned by +stat(2) on an overlay object are often not the same as the real file +stat(2) values to prevent the values from changing on copy_up. + +Unless "xino" feature is enabled, when overlay layers are not all on the +same underlying filesystem, the value of st_dev may be different for two +non-directory objects in the same overlay filesystem and the value of +st_ino for directory objects may be non persistent and could change even +while the overlay filesystem is still mounted. Unless "inode index" feature is enabled, if a file with multiple hard links is copied up, then this will "break" the link. Changes will not be @@ -302,6 +328,7 @@ propagated to other names referring to the same inode. Unless "redirect_dir" feature is enabled, rename(2) on a lower or merged directory will fail with EXDEV. + Changes to underlying filesystems --------------------------------- diff --git a/Documentation/livepatch/shadow-vars.txt b/Documentation/livepatch/shadow-vars.txt index 89c66634d600..ecc09a7be5dd 100644 --- a/Documentation/livepatch/shadow-vars.txt +++ b/Documentation/livepatch/shadow-vars.txt @@ -34,9 +34,13 @@ meta-data and shadow-data: - data[] - storage for shadow data It is important to note that the klp_shadow_alloc() and -klp_shadow_get_or_alloc() calls, described below, store a *copy* of the -data that the functions are provided. Callers should provide whatever -mutual exclusion is required of the shadow data. +klp_shadow_get_or_alloc() are zeroing the variable by default. +They also allow to call a custom constructor function when a non-zero +value is needed. Callers should provide whatever mutual exclusion +is required. + +Note that the constructor is called under klp_shadow_lock spinlock. It allows +to do actions that can be done only once when a new variable is allocated. * klp_shadow_get() - retrieve a shadow variable data pointer - search hashtable for pair @@ -47,7 +51,7 @@ mutual exclusion is required of the shadow data. - WARN and return NULL - if doesn't already exist - allocate a new shadow variable - - copy data into the new shadow variable + - initialize the variable using a custom constructor and data when provided - add to the global hashtable * klp_shadow_get_or_alloc() - get existing or alloc a new shadow variable @@ -56,16 +60,20 @@ mutual exclusion is required of the shadow data. - return existing shadow variable - if doesn't already exist - allocate a new shadow variable - - copy data into the new shadow variable + - initialize the variable using a custom constructor and data when provided - add pair to the global hashtable * klp_shadow_free() - detach and free a shadow variable - find and remove a reference from global hashtable - - if found, free shadow variable + - if found + - call destructor function if defined + - free shadow variable * klp_shadow_free_all() - detach and free all <*, id> shadow variables - find and remove any <*, id> references from global hashtable - - if found, free shadow variable + - if found + - call destructor function if defined + - free shadow variable 2. Use cases @@ -107,7 +115,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp); /* Attach a corresponding shadow variable, then initialize it */ - ps_lock = klp_shadow_alloc(sta, PS_LOCK, NULL, sizeof(*ps_lock), gfp); + ps_lock = klp_shadow_alloc(sta, PS_LOCK, sizeof(*ps_lock), gfp, + NULL, NULL); if (!ps_lock) goto shadow_fail; spin_lock_init(ps_lock); @@ -131,7 +140,7 @@ variable: void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) { - klp_shadow_free(sta, PS_LOCK); + klp_shadow_free(sta, PS_LOCK, NULL); kfree(sta); ... @@ -148,16 +157,24 @@ shadow variables to parents already in-flight. For commit 1d147bfa6429, a good spot to allocate a shadow spinlock is inside ieee80211_sta_ps_deliver_wakeup(): +int ps_lock_shadow_ctor(void *obj, void *shadow_data, void *ctor_data) +{ + spinlock_t *lock = shadow_data; + + spin_lock_init(lock); + return 0; +} + #define PS_LOCK 1 void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) { - DEFINE_SPINLOCK(ps_lock_fallback); spinlock_t *ps_lock; /* sync with ieee80211_tx_h_unicast_ps_buf */ ps_lock = klp_shadow_get_or_alloc(sta, PS_LOCK, - &ps_lock_fallback, sizeof(ps_lock_fallback), - GFP_ATOMIC); + sizeof(*ps_lock), GFP_ATOMIC, + ps_lock_shadow_ctor, NULL); + if (ps_lock) spin_lock(ps_lock); ... diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index a4508ec1816b..fd55c7de9991 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -169,7 +169,7 @@ access to BPF code as well. BPF engine and instruction set ------------------------------ -Under tools/net/ there's a small helper tool called bpf_asm which can +Under tools/bpf/ there's a small helper tool called bpf_asm which can be used to write low-level filters for example scenarios mentioned in the previous section. Asm-like syntax mentioned here has been implemented in bpf_asm and will be used for further explanations (instead of dealing with @@ -359,7 +359,7 @@ $ ./bpf_asm -c foo In particular, as usage with xt_bpf or cls_bpf can result in more complex BPF filters that might not be obvious at first, it's good to test filters before attaching to a live system. For that purpose, there's a small tool called -bpf_dbg under tools/net/ in the kernel source directory. This debugger allows +bpf_dbg under tools/bpf/ in the kernel source directory. This debugger allows for testing BPF filters against given pcap files, single stepping through the BPF code on the pcap's packets and to do BPF machine register dumps. @@ -483,7 +483,7 @@ Example output from dmesg: [ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00 [ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3 -In the kernel source tree under tools/net/, there's bpf_jit_disasm for +In the kernel source tree under tools/bpf/, there's bpf_jit_disasm for generating disassembly out of the kernel log's hexdump: # ./bpf_jit_disasm diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 5dc1a040a2f1..b583a73cf95f 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1390,26 +1390,26 @@ mld_qrv - INTEGER Default: 2 (as specified by RFC3810 9.1) Minimum: 1 (as specified by RFC6636 4.5) -max_dst_opts_cnt - INTEGER +max_dst_opts_number - INTEGER Maximum number of non-padding TLVs allowed in a Destination options extension header. If this value is less than zero then unknown options are disallowed and the number of known TLVs allowed is the absolute value of this number. Default: 8 -max_hbh_opts_cnt - INTEGER +max_hbh_opts_number - INTEGER Maximum number of non-padding TLVs allowed in a Hop-by-Hop options extension header. If this value is less than zero then unknown options are disallowed and the number of known TLVs allowed is the absolute value of this number. Default: 8 -max dst_opts_len - INTEGER +max_dst_opts_length - INTEGER Maximum length allowed for a Destination options extension header. Default: INT_MAX (unlimited) -max hbh_opts_len - INTEGER +max_hbh_length - INTEGER Maximum length allowed for a Hop-by-Hop options extension header. Default: INT_MAX (unlimited) diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst index 314c8bf6f2a2..0d4f29bc798b 100644 --- a/Documentation/process/adding-syscalls.rst +++ b/Documentation/process/adding-syscalls.rst @@ -360,7 +360,7 @@ First, the entry in ``arch/x86/entry/syscalls/syscall_32.tbl`` gets an extra column to indicate that a 32-bit userspace program running on a 64-bit kernel should hit the compat entry point:: - 380 i386 xyzzy sys_xyzzy compat_sys_xyzzy + 380 i386 xyzzy sys_xyzzy __ia32_compat_sys_xyzzy Second, you need to figure out what should happen for the x32 ABI version of the new system call. There's a choice here: the layout of the arguments @@ -373,7 +373,7 @@ the compatibility wrapper:: 333 64 xyzzy sys_xyzzy ... - 555 x32 xyzzy compat_sys_xyzzy + 555 x32 xyzzy __x32_compat_sys_xyzzy If no pointers are involved, then it is preferable to re-use the 64-bit system call for the x32 ABI (and consequently the entry in diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index bb9a0a53e76b..911399730c1c 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -255,6 +255,7 @@ temperature) and throttle appropriate devices. 2. sysfs attributes structure RO read only value +WO write only value RW read/write value Thermal sysfs attributes will be represented under /sys/class/thermal. @@ -286,6 +287,11 @@ Thermal cooling device sys I/F, created once it's registered: |---type: Type of the cooling device(processor/fan/...) |---max_state: Maximum cooling state of the cooling device |---cur_state: Current cooling state of the cooling device + |---stats: Directory containing cooling device's statistics + |---stats/reset: Writing any value resets the statistics + |---stats/time_in_state_ms: Time (msec) spent in various cooling states + |---stats/total_trans: Total number of times cooling state is changed + |---stats/trans_table: Cooing state transition table Then next two dynamic attributes are created/removed in pairs. They represent @@ -490,6 +496,31 @@ cur_state - cur_state == max_state means the maximum cooling. RW, Required +stats/reset + Writing any value resets the cooling device's statistics. + WO, Required + +stats/time_in_state_ms: + The amount of time spent by the cooling device in various cooling + states. The output will have "