m68knommu: platform setup for 527x ColdFire parts

Switch to platform style configuration for 527x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Greg Ungerer 2008-02-01 17:34:40 +10:00 committed by Linus Torvalds
parent 96db271ace
commit e206da0bb3
1 changed files with 78 additions and 9 deletions

View File

@ -16,11 +16,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/dma.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
#include <asm/mcfuart.h>
/***************************************************************************/
@ -28,14 +28,72 @@ void coldfire_reset(void);
/***************************************************************************/
/*
* DMA channel base address table.
*/
unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
MCF_MBAR + MCFDMA_BASE0,
static struct mcf_platform_uart m527x_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
static struct platform_device m527x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m527x_uart_platform,
};
static struct platform_device *m527x_devices[] __initdata = {
&m527x_uart,
};
/***************************************************************************/
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
static void __init m527x_uart_init_line(int line, int irq)
{
u16 sepmask;
u32 imr;
if ((line < 0) || (line > 2))
return;
/* level 6, line based priority */
writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
imr = readl(INTC0 + MCFINTC_IMRL);
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
writel(imr, INTC0 + MCFINTC_IMRL);
/*
* External Pin Mask Setting & Enable External Pin for Interface
*/
sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
if (line == 0)
sepmask |= UART0_ENABLE_MASK;
else if (line == 1)
sepmask |= UART1_ENABLE_MASK;
else if (line == 2)
sepmask |= UART2_ENABLE_MASK;
writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
}
static void __init m527x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m527x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m527x_uart_init_line(line, m527x_uart_platform[line].irq);
}
/***************************************************************************/
@ -54,10 +112,21 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
void config_BSP(char *commandp, int size)
void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
mach_reset = coldfire_reset;
}
/***************************************************************************/
static int __init init_BSP(void)
{
m527x_uarts_init();
platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/