V4L/DVB (12931): SAA7164: Fix the 88021 definition to work with production boards.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Steven Toth 2009-05-11 22:03:07 -03:00 committed by Mauro Carvalho Chehab
parent 78d155693a
commit e333522225
4 changed files with 63 additions and 3 deletions

View File

@ -5,4 +5,5 @@
4 -> Hauppauge WinTV-HVR2200 [0070:8980]
5 -> Hauppauge WinTV-HVR2200 [0070:8900]
6 -> Hauppauge WinTV-HVR2200 [0070:8901]
7 -> Hauppauge WinTV-HVR2250 [0070:88A1,0070:8891]
7 -> Hauppauge WinTV-HVR2250 [0070:8891]
8 -> Hauppauge WinTV-HVR2250 [0070:88A1]

View File

@ -303,6 +303,62 @@ struct saa7164_board saa7164_boards[] = {
.i2c_reg_len = REGLEN_8bit,
} },
},
[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
.name = "Hauppauge WinTV-HVR2250",
.porta = SAA7164_MPEG_DVB,
.portb = SAA7164_MPEG_DVB,
.chiprev = SAA7164_CHIP_REV3,
.unit = {{
.id = 0x22,
.type = SAA7164_UNIT_EEPROM,
.name = "4K EEPROM",
.i2c_bus_nr = SAA7164_I2C_BUS_0,
.i2c_bus_addr = 0xa0 >> 1,
.i2c_reg_len = REGLEN_8bit,
}, {
.id = 0x04,
.type = SAA7164_UNIT_TUNER,
.name = "TDA18271-1",
.i2c_bus_nr = SAA7164_I2C_BUS_1,
.i2c_bus_addr = 0xc0 >> 1,
.i2c_reg_len = REGLEN_8bit,
}, {
.id = 0x07,
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
.name = "CX24228/S5H1411-1 (TOP)",
.i2c_bus_nr = SAA7164_I2C_BUS_1,
.i2c_bus_addr = 0x32 >> 1,
.i2c_reg_len = REGLEN_8bit,
}, {
.id = 0x08,
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
.name = "CX24228/S5H1411-1 (QAM)",
.i2c_bus_nr = SAA7164_I2C_BUS_1,
.i2c_bus_addr = 0x34 >> 1,
.i2c_reg_len = REGLEN_8bit,
}, {
.id = 0x22,
.type = SAA7164_UNIT_TUNER,
.name = "TDA18271-2",
.i2c_bus_nr = SAA7164_I2C_BUS_2,
.i2c_bus_addr = 0xc0 >> 1,
.i2c_reg_len = REGLEN_8bit,
}, {
.id = 0x24,
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
.name = "CX24228/S5H1411-2 (TOP)",
.i2c_bus_nr = SAA7164_I2C_BUS_2,
.i2c_bus_addr = 0x32 >> 1,
.i2c_reg_len = REGLEN_8bit,
}, {
.id = 0x27,
.type = SAA7164_UNIT_DIGITAL_DEMODULATOR,
.name = "CX24228/S5H1411-2 (QAM)",
.i2c_bus_nr = SAA7164_I2C_BUS_2,
.i2c_bus_addr = 0x34 >> 1,
.i2c_reg_len = REGLEN_8bit,
} },
},
};
const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
@ -333,7 +389,7 @@ struct saa7164_subid saa7164_subids[] = {
}, {
.subvendor = 0x0070,
.subdevice = 0x88A1,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
.card = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
}, {
.subvendor = 0x0070,
.subdevice = 0x8891,
@ -385,6 +441,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
/*
GPIO 2: s5h1411 / tda10048-1 demod reset
GPIO 3: s5h1411 / tda10048-2 demod reset
@ -464,7 +521,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
hauppauge_eeprom(dev, &eeprom[0]);
break;
}

View File

@ -542,6 +542,7 @@ int saa7164_dvb_register(struct saa7164_tsport *port)
break;
case SAA7164_BOARD_HAUPPAUGE_HVR2250:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
i2c_bus = &dev->i2c_bus[port->nr + 1];
port->dvb.frontend = dvb_attach(s5h1411_attach,

View File

@ -72,6 +72,7 @@
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_2 5
#define SAA7164_BOARD_HAUPPAUGE_HVR2200_3 6
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_2 7
#define SAA7164_BOARD_HAUPPAUGE_HVR2250_3 8
#define SAA7164_MAX_UNITS 8
#define SAA7164_TS_NUMBER_OF_LINES 312