drm/bridge: Add the necessary bits to support bus format negotiation

drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.

The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.

Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).

Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
This commit is contained in:
Boris Brezillon 2020-01-06 15:34:09 +01:00 committed by Neil Armstrong
parent b86d895524
commit e351e4d5ea
2 changed files with 390 additions and 1 deletions

View File

@ -671,13 +671,261 @@ static int drm_atomic_bridge_check(struct drm_bridge *bridge,
return 0;
}
/**
* drm_atomic_helper_bridge_propagate_bus_fmt() - Propagate output format to
* the input end of a bridge
* @bridge: bridge control structure
* @bridge_state: new bridge state
* @crtc_state: new CRTC state
* @conn_state: new connector state
* @output_fmt: tested output bus format
* @num_input_fmts: will contain the size of the returned array
*
* This helper is a pluggable implementation of the
* &drm_bridge_funcs.atomic_get_input_bus_fmts operation for bridges that don't
* modify the bus configuration between their input and their output. It
* returns an array of input formats with a single element set to @output_fmt.
*
* RETURNS:
* a valid format array of size @num_input_fmts, or NULL if the allocation
* failed
*/
u32 *
drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts)
{
u32 *input_fmts;
input_fmts = kzalloc(sizeof(*input_fmts), GFP_KERNEL);
if (!input_fmts) {
*num_input_fmts = 0;
return NULL;
}
*num_input_fmts = 1;
input_fmts[0] = output_fmt;
return input_fmts;
}
EXPORT_SYMBOL(drm_atomic_helper_bridge_propagate_bus_fmt);
static int select_bus_fmt_recursive(struct drm_bridge *first_bridge,
struct drm_bridge *cur_bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 out_bus_fmt)
{
struct drm_bridge_state *cur_state;
unsigned int num_in_bus_fmts, i;
struct drm_bridge *prev_bridge;
u32 *in_bus_fmts;
int ret;
prev_bridge = drm_bridge_get_prev_bridge(cur_bridge);
cur_state = drm_atomic_get_new_bridge_state(crtc_state->state,
cur_bridge);
if (WARN_ON(!cur_state))
return -EINVAL;
/*
* If bus format negotiation is not supported by this bridge, let's
* pass MEDIA_BUS_FMT_FIXED to the previous bridge in the chain and
* hope that it can handle this situation gracefully (by providing
* appropriate default values).
*/
if (!cur_bridge->funcs->atomic_get_input_bus_fmts) {
if (cur_bridge != first_bridge) {
ret = select_bus_fmt_recursive(first_bridge,
prev_bridge, crtc_state,
conn_state,
MEDIA_BUS_FMT_FIXED);
if (ret)
return ret;
}
cur_state->input_bus_cfg.format = MEDIA_BUS_FMT_FIXED;
cur_state->output_bus_cfg.format = out_bus_fmt;
return 0;
}
in_bus_fmts = cur_bridge->funcs->atomic_get_input_bus_fmts(cur_bridge,
cur_state,
crtc_state,
conn_state,
out_bus_fmt,
&num_in_bus_fmts);
if (!num_in_bus_fmts)
return -ENOTSUPP;
else if (!in_bus_fmts)
return -ENOMEM;
if (first_bridge == cur_bridge) {
cur_state->input_bus_cfg.format = in_bus_fmts[0];
cur_state->output_bus_cfg.format = out_bus_fmt;
kfree(in_bus_fmts);
return 0;
}
for (i = 0; i < num_in_bus_fmts; i++) {
ret = select_bus_fmt_recursive(first_bridge, prev_bridge,
crtc_state, conn_state,
in_bus_fmts[i]);
if (ret != -ENOTSUPP)
break;
}
if (!ret) {
cur_state->input_bus_cfg.format = in_bus_fmts[i];
cur_state->output_bus_cfg.format = out_bus_fmt;
}
kfree(in_bus_fmts);
return ret;
}
/*
* This function is called by &drm_atomic_bridge_chain_check() just before
* calling &drm_bridge_funcs.atomic_check() on all elements of the chain.
* It performs bus format negotiation between bridge elements. The negotiation
* happens in reverse order, starting from the last element in the chain up to
* @bridge.
*
* Negotiation starts by retrieving supported output bus formats on the last
* bridge element and testing them one by one. The test is recursive, meaning
* that for each tested output format, the whole chain will be walked backward,
* and each element will have to choose an input bus format that can be
* transcoded to the requested output format. When a bridge element does not
* support transcoding into a specific output format -ENOTSUPP is returned and
* the next bridge element will have to try a different format. If none of the
* combinations worked, -ENOTSUPP is returned and the atomic modeset will fail.
*
* This implementation is relying on
* &drm_bridge_funcs.atomic_get_output_bus_fmts() and
* &drm_bridge_funcs.atomic_get_input_bus_fmts() to gather supported
* input/output formats.
*
* When &drm_bridge_funcs.atomic_get_output_bus_fmts() is not implemented by
* the last element of the chain, &drm_atomic_bridge_chain_select_bus_fmts()
* tries a single format: &drm_connector.display_info.bus_formats[0] if
* available, MEDIA_BUS_FMT_FIXED otherwise.
*
* When &drm_bridge_funcs.atomic_get_input_bus_fmts() is not implemented,
* &drm_atomic_bridge_chain_select_bus_fmts() skips the negotiation on the
* bridge element that lacks this hook and asks the previous element in the
* chain to try MEDIA_BUS_FMT_FIXED. It's up to bridge drivers to decide what
* to do in that case (fail if they want to enforce bus format negotiation, or
* provide a reasonable default if they need to support pipelines where not
* all elements support bus format negotiation).
*/
static int
drm_atomic_bridge_chain_select_bus_fmts(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct drm_connector *conn = conn_state->connector;
struct drm_encoder *encoder = bridge->encoder;
struct drm_bridge_state *last_bridge_state;
unsigned int i, num_out_bus_fmts;
struct drm_bridge *last_bridge;
u32 *out_bus_fmts;
int ret = 0;
last_bridge = list_last_entry(&encoder->bridge_chain,
struct drm_bridge, chain_node);
last_bridge_state = drm_atomic_get_new_bridge_state(crtc_state->state,
last_bridge);
if (WARN_ON(!last_bridge_state))
return -EINVAL;
if (last_bridge->funcs->atomic_get_output_bus_fmts) {
const struct drm_bridge_funcs *funcs = last_bridge->funcs;
out_bus_fmts = funcs->atomic_get_output_bus_fmts(last_bridge,
last_bridge_state,
crtc_state,
conn_state,
&num_out_bus_fmts);
if (!num_out_bus_fmts)
return -ENOTSUPP;
else if (!out_bus_fmts)
return -ENOMEM;
} else {
num_out_bus_fmts = 1;
out_bus_fmts = kmalloc(sizeof(*out_bus_fmts), GFP_KERNEL);
if (!out_bus_fmts)
return -ENOMEM;
if (conn->display_info.num_bus_formats &&
conn->display_info.bus_formats)
out_bus_fmts[0] = conn->display_info.bus_formats[0];
else
out_bus_fmts[0] = MEDIA_BUS_FMT_FIXED;
}
for (i = 0; i < num_out_bus_fmts; i++) {
ret = select_bus_fmt_recursive(bridge, last_bridge, crtc_state,
conn_state, out_bus_fmts[i]);
if (ret != -ENOTSUPP)
break;
}
kfree(out_bus_fmts);
return ret;
}
static void
drm_atomic_bridge_propagate_bus_flags(struct drm_bridge *bridge,
struct drm_connector *conn,
struct drm_atomic_state *state)
{
struct drm_bridge_state *bridge_state, *next_bridge_state;
struct drm_bridge *next_bridge;
u32 output_flags;
bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
next_bridge = drm_bridge_get_next_bridge(bridge);
/*
* Let's try to apply the most common case here, that is, propagate
* display_info flags for the last bridge, and propagate the input
* flags of the next bridge element to the output end of the current
* bridge when the bridge is not the last one.
* There are exceptions to this rule, like when signal inversion is
* happening at the board level, but that's something drivers can deal
* with from their &drm_bridge_funcs.atomic_check() implementation by
* simply overriding the flags value we've set here.
*/
if (!next_bridge) {
output_flags = conn->display_info.bus_flags;
} else {
next_bridge_state = drm_atomic_get_new_bridge_state(state,
next_bridge);
output_flags = next_bridge_state->input_bus_cfg.flags;
}
bridge_state->output_bus_cfg.flags = output_flags;
/*
* Propage the output flags to the input end of the bridge. Again, it's
* not necessarily what all bridges want, but that's what most of them
* do, and by doing that by default we avoid forcing drivers to
* duplicate the "dummy propagation" logic.
*/
bridge_state->input_bus_cfg.flags = output_flags;
}
/**
* drm_atomic_bridge_chain_check() - Do an atomic check on the bridge chain
* @bridge: bridge control structure
* @crtc_state: new CRTC state
* @conn_state: new connector state
*
* Calls &drm_bridge_funcs.atomic_check() (falls back on
* First trigger a bus format negotiation before calling
* &drm_bridge_funcs.atomic_check() (falls back on
* &drm_bridge_funcs.mode_fixup()) op for all the bridges in the encoder chain,
* starting from the last bridge to the first. These are called before calling
* &drm_encoder_helper_funcs.atomic_check()
@ -689,12 +937,29 @@ int drm_atomic_bridge_chain_check(struct drm_bridge *bridge,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
struct drm_connector *conn = conn_state->connector;
struct drm_encoder *encoder = bridge->encoder;
struct drm_bridge *iter;
int ret;
ret = drm_atomic_bridge_chain_select_bus_fmts(bridge, crtc_state,
conn_state);
if (ret)
return ret;
list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
int ret;
/*
* Bus flags are propagated by default. If a bridge needs to
* tweak the input bus flags for any reason, it should happen
* in its &drm_bridge_funcs.atomic_check() implementation such
* that preceding bridges in the chain can propagate the new
* bus flags.
*/
drm_atomic_bridge_propagate_bus_flags(iter, conn,
crtc_state->state);
ret = drm_atomic_bridge_check(iter, crtc_state, conn_state);
if (ret)
return ret;

View File

@ -35,6 +35,38 @@ struct drm_bridge;
struct drm_bridge_timings;
struct drm_panel;
/**
* struct drm_bus_cfg - bus configuration
*
* This structure stores the configuration of a physical bus between two
* components in an output pipeline, usually between two bridges, an encoder
* and a bridge, or a bridge and a connector.
*
* The bus configuration is stored in &drm_bridge_state separately for the
* input and output buses, as seen from the point of view of each bridge. The
* bus configuration of a bridge output is usually identical to the
* configuration of the next bridge's input, but may differ if the signals are
* modified between the two bridges, for instance by an inverter on the board.
* The input and output configurations of a bridge may differ if the bridge
* modifies the signals internally, for instance by performing format
* conversion, or modifying signals polarities.
*/
struct drm_bus_cfg {
/**
* @format: format used on this bus (one of the MEDIA_BUS_FMT_* format)
*
* This field should not be directly modified by drivers
* (&drm_atomic_bridge_chain_select_bus_fmts() takes care of the bus
* format negotiation).
*/
u32 format;
/**
* @flags: DRM_BUS_* flags used on this bus
*/
u32 flags;
};
/**
* struct drm_bridge_state - Atomic bridge state object
* @base: inherit from &drm_private_state
@ -44,6 +76,16 @@ struct drm_bridge_state {
struct drm_private_state base;
struct drm_bridge *bridge;
/**
* @input_bus_cfg: input bus configuration
*/
struct drm_bus_cfg input_bus_cfg;
/**
* @output_bus_cfg: input bus configuration
*/
struct drm_bus_cfg output_bus_cfg;
};
static inline struct drm_bridge_state *
@ -387,6 +429,72 @@ struct drm_bridge_funcs {
void (*atomic_destroy_state)(struct drm_bridge *bridge,
struct drm_bridge_state *state);
/**
* @atomic_get_output_bus_fmts:
*
* Return the supported bus formats on the output end of a bridge.
* The returned array must be allocated with kmalloc() and will be
* freed by the caller. If the allocation fails, NULL should be
* returned. num_output_fmts must be set to the returned array size.
* Formats listed in the returned array should be listed in decreasing
* preference order (the core will try all formats until it finds one
* that works).
*
* This method is only called on the last element of the bridge chain
* as part of the bus format negotiation process that happens in
* &drm_atomic_bridge_chain_select_bus_fmts().
* This method is optional. When not implemented, the core will
* fall back to &drm_connector.display_info.bus_formats[0] if
* &drm_connector.display_info.num_bus_formats > 0,
* or to MEDIA_BUS_FMT_FIXED otherwise.
*/
u32 *(*atomic_get_output_bus_fmts)(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
unsigned int *num_output_fmts);
/**
* @atomic_get_input_bus_fmts:
*
* Return the supported bus formats on the input end of a bridge for
* a specific output bus format.
*
* The returned array must be allocated with kmalloc() and will be
* freed by the caller. If the allocation fails, NULL should be
* returned. num_output_fmts must be set to the returned array size.
* Formats listed in the returned array should be listed in decreasing
* preference order (the core will try all formats until it finds one
* that works). When the format is not supported NULL should be
* returned and *num_output_fmts should be set to 0.
*
* This method is called on all elements of the bridge chain as part of
* the bus format negotiation process that happens in
* &drm_atomic_bridge_chain_select_bus_fmts().
* This method is optional. When not implemented, the core will bypass
* bus format negotiation on this element of the bridge without
* failing, and the previous element in the chain will be passed
* MEDIA_BUS_FMT_FIXED as its output bus format.
*
* Bridge drivers that need to support being linked to bridges that are
* not supporting bus format negotiation should handle the
* output_fmt == MEDIA_BUS_FMT_FIXED case appropriately, by selecting a
* sensible default value or extracting this information from somewhere
* else (FW property, &drm_display_mode, &drm_display_info, ...)
*
* Note: Even if input format selection on the first bridge has no
* impact on the negotiation process (bus format negotiation stops once
* we reach the first element of the chain), drivers are expected to
* return accurate input formats as the input format may be used to
* configure the CRTC output appropriately.
*/
u32 *(*atomic_get_input_bus_fmts)(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts);
/**
* @atomic_check:
*
@ -401,6 +509,14 @@ struct drm_bridge_funcs {
* called when &drm_bridge_funcs.atomic_check() is implemented, so only
* one of them should be provided.
*
* If drivers need to tweak &drm_bridge_state.input_bus_cfg.flags or
* &drm_bridge_state.output_bus_cfg.flags it should should happen in
* this function. By default the &drm_bridge_state.output_bus_cfg.flags
* field is set to the next bridge
* &drm_bridge_state.input_bus_cfg.flags value or
* &drm_connector.display_info.bus_flags if the bridge is the last
* element in the chain.
*
* RETURNS:
* zero if the check passed, a negative error code otherwise.
*/
@ -588,6 +704,14 @@ void drm_atomic_bridge_chain_pre_enable(struct drm_bridge *bridge,
void drm_atomic_bridge_chain_enable(struct drm_bridge *bridge,
struct drm_atomic_state *state);
u32 *
drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge,
struct drm_bridge_state *bridge_state,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state,
u32 output_fmt,
unsigned int *num_input_fmts);
void __drm_atomic_helper_bridge_reset(struct drm_bridge *bridge,
struct drm_bridge_state *state);
void __drm_atomic_helper_bridge_duplicate_state(struct drm_bridge *bridge,