[PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000

No longer maintained
This commit is contained in:
Russell King 2005-11-04 17:26:56 +00:00
parent 30c2f90b68
commit e399822da0
3 changed files with 3 additions and 15 deletions

View File

@ -1374,7 +1374,7 @@ config FORCEDETH
config CS89x0
tristate "CS89x0 support"
depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000
depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the

View File

@ -182,10 +182,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
#elif defined(CONFIG_MACH_MP1000)
#include <asm/arch/mp1000-seprom.h>
static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0};
static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0};
#else
static unsigned int netcard_portlist[] __initdata =
{ 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@ -594,10 +590,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
cnt -= j;
}
} else
#elif defined(CONFIG_MACH_MP1000)
if (1) {
memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN);
} else
#endif
if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) ==
@ -657,10 +649,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
if (1) {
printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
} else
#elif defined(CONFIG_MACH_MP1000)
if (1) {
lp->force |= FORCE_RJ45;
} else
#endif
if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
@ -1243,7 +1231,7 @@ net_open(struct net_device *dev)
else
#endif
{
#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000)
#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);

View File

@ -16,7 +16,7 @@
#include <linux/config.h>
#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000)
#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
/* IXDP2401/IXDP2801 uses dword-aligned register addressing */
#define CS89x0_PORT(reg) ((reg) * 2)
#else