Merge branches 'pm-core', 'pm-sleep' and 'acpi-pm'

* pm-core:
  driver core: Introduce device links reference counting
  PM / wakeirq: Add wakeup name to dedicated wake irqs

* pm-sleep:
  PM / hibernate: Change message when writing to /sys/power/resume
  PM / hibernate: Make passing hibernate offsets more friendly
  PCMCIA / PM: Avoid noirq suspend aborts during suspend-to-idle

* acpi-pm:
  ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA
  ACPI / PM: Allow deeper wakeup power states with no _SxD nor _SxW
  ACPI / PM: Reduce LPI constraints logging noise
  ACPI / PM: Do not reconfigure GPEs for suspend-to-idle

Documentation/ABI/testing/sysfs-power

@@ -287,3 +287,17 @@ Description:
 		Writing a "1" to this file enables the debug messages and
 		writing a "0" (default) to it disables them.  Reads from
 		this file return the current value.
+
+What:		/sys/power/resume_offset
+Date:		April 2018
+Contact:	Mario Limonciello <mario.limonciello@dell.com>
+Description:
+		This file is used for telling the kernel an offset into a disk
+		to use when hibernating the system such as with a swap file.
+
+		Reads from this file will display the current offset
+		the kernel will be using on the next hibernation
+		attempt.
+
+		Using this sysfs file will override any values that were
+		set using the kernel command line for disk offset.

Documentation/power/swsusp.txt

@@ -24,8 +24,16 @@ Some warnings, first.
  * see the FAQ below for details.  (This is not true for more traditional
  * power states like "standby", which normally don't turn USB off.)
 
+Swap partition:
 You need to append resume=/dev/your_swap_partition to kernel command
-line. Then you suspend by
+line or specify it using /sys/power/resume.
+
+Swap file:
+If using a swapfile you can also specify a resume offset using
+resume_offset=<number> on the kernel command line or specify it
+in /sys/power/resume_offset.
+
+After preparing then you suspend by
 
 echo shutdown > /sys/power/disk; echo disk > /sys/power/state
 

drivers/acpi/device_pm.c

@@ -543,6 +543,7 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
 	unsigned long long ret;
 	int d_min, d_max;
 	bool wakeup = false;
+	bool has_sxd = false;
 	acpi_status status;
 
 	/*
@@ -581,6 +582,10 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
 			else
 				return -ENODATA;
 		}
+
+		if (status == AE_OK)
+			has_sxd = true;
+
 		d_min = ret;
 		wakeup = device_may_wakeup(dev) && adev->wakeup.flags.valid
 			&& adev->wakeup.sleep_state >= target_state;
@@ -599,7 +604,11 @@ static int acpi_dev_pm_get_state(struct device *dev, struct acpi_device *adev,
 		method[3] = 'W';
 		status = acpi_evaluate_integer(handle, method, NULL, &ret);
 		if (status == AE_NOT_FOUND) {
-			if (target_state > ACPI_STATE_S0)
+			/* No _SxW. In this case, the ACPI spec says that we
+			 * must not go into any power state deeper than the
+			 * value returned from _SxD.
+			 */
+			if (has_sxd && target_state > ACPI_STATE_S0)
 				d_max = d_min;
 		} else if (ACPI_SUCCESS(status) && ret <= ACPI_STATE_D3_COLD) {
 			/* Fall back to D3cold if ret is not a valid state. */

drivers/acpi/sleep.c

@@ -851,23 +851,25 @@ static void lpi_check_constraints(void)
 	int i;
 
 	for (i = 0; i < lpi_constraints_table_size; ++i) {
+		acpi_handle handle = lpi_constraints_table[i].handle;
 		struct acpi_device *adev;
 
-		if (acpi_bus_get_device(lpi_constraints_table[i].handle, &adev))
+		if (!handle || acpi_bus_get_device(handle, &adev))
 			continue;
 
-		acpi_handle_debug(adev->handle,
+		acpi_handle_debug(handle,
 			"LPI: required min power state:%s current power state:%s\n",
 			acpi_power_state_string(lpi_constraints_table[i].min_dstate),
 			acpi_power_state_string(adev->power.state));
 
 		if (!adev->flags.power_manageable) {
-			acpi_handle_info(adev->handle, "LPI: Device not power manageble\n");
+			acpi_handle_info(handle, "LPI: Device not power manageable\n");
+			lpi_constraints_table[i].handle = NULL;
 			continue;
 		}
 
 		if (adev->power.state < lpi_constraints_table[i].min_dstate)
-			acpi_handle_info(adev->handle,
+			acpi_handle_info(handle,
 				"LPI: Constraint not met; min power state:%s current power state:%s\n",
 				acpi_power_state_string(lpi_constraints_table[i].min_dstate),
 				acpi_power_state_string(adev->power.state));
@@ -953,15 +955,8 @@ static int acpi_s2idle_prepare(void)
 	if (lps0_device_handle) {
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF);
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY);
-	} else {
-		/*
-		 * The configuration of GPEs is changed here to avoid spurious
-		 * wakeups, but that should not be necessary if this is a
-		 * "low-power S0" platform and the low-power S0 _DSM is present.
-		 */
-		acpi_enable_all_wakeup_gpes();
-		acpi_os_wait_events_complete();
 	}
+
 	if (acpi_sci_irq_valid())
 		enable_irq_wake(acpi_sci_irq);
 
@@ -994,8 +989,9 @@ static void acpi_s2idle_sync(void)
 	 * The EC driver uses the system workqueue and an additional special
 	 * one, so those need to be flushed too.
 	 */
+	acpi_os_wait_events_complete();	/* synchronize SCI IRQ handling */
 	acpi_ec_flush_work();
-	acpi_os_wait_events_complete();
+	acpi_os_wait_events_complete();	/* synchronize Notify handling */
 	s2idle_wakeup = false;
 }
 
@@ -1007,8 +1003,6 @@ static void acpi_s2idle_restore(void)
 	if (lps0_device_handle) {
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT);
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON);
-	} else {
-		acpi_enable_all_runtime_gpes();
 	}
 }
 

drivers/base/core.c

@@ -196,8 +196,10 @@ struct device_link *device_link_add(struct device *consumer,
 	}
 
 	list_for_each_entry(link, &supplier->links.consumers, s_node)
-		if (link->consumer == consumer)
+		if (link->consumer == consumer) {
+			kref_get(&link->kref);
 			goto out;
+		}
 
 	link = kzalloc(sizeof(*link), GFP_KERNEL);
 	if (!link)
@@ -222,6 +224,7 @@ struct device_link *device_link_add(struct device *consumer,
 	link->consumer = consumer;
 	INIT_LIST_HEAD(&link->c_node);
 	link->flags = flags;
+	kref_init(&link->kref);
 
 	/* Determine the initial link state. */
 	if (flags & DL_FLAG_STATELESS) {
@@ -292,8 +295,10 @@ static void __device_link_free_srcu(struct rcu_head *rhead)
 	device_link_free(container_of(rhead, struct device_link, rcu_head));
 }
 
-static void __device_link_del(struct device_link *link)
+static void __device_link_del(struct kref *kref)
 {
+	struct device_link *link = container_of(kref, struct device_link, kref);
+
 	dev_info(link->consumer, "Dropping the link to %s\n",
 		 dev_name(link->supplier));
 
@@ -305,8 +310,10 @@ static void __device_link_del(struct device_link *link)
 	call_srcu(&device_links_srcu, &link->rcu_head, __device_link_free_srcu);
 }
 #else /* !CONFIG_SRCU */
-static void __device_link_del(struct device_link *link)
+static void __device_link_del(struct kref *kref)
 {
+	struct device_link *link = container_of(kref, struct device_link, kref);
+
 	dev_info(link->consumer, "Dropping the link to %s\n",
 		 dev_name(link->supplier));
 
@@ -324,13 +331,15 @@ static void __device_link_del(struct device_link *link)
  * @link: Device link to delete.
  *
  * The caller must ensure proper synchronization of this function with runtime
- * PM.
+ * PM.  If the link was added multiple times, it needs to be deleted as often.
+ * Care is required for hotplugged devices:  Their links are purged on removal
+ * and calling device_link_del() is then no longer allowed.
  */
 void device_link_del(struct device_link *link)
 {
 	device_links_write_lock();
 	device_pm_lock();
-	__device_link_del(link);
+	kref_put(&link->kref, __device_link_del);
 	device_pm_unlock();
 	device_links_write_unlock();
 }
@@ -444,7 +453,7 @@ static void __device_links_no_driver(struct device *dev)
 			continue;
 
 		if (link->flags & DL_FLAG_AUTOREMOVE)
-			__device_link_del(link);
+			kref_put(&link->kref, __device_link_del);
 		else if (link->status != DL_STATE_SUPPLIER_UNBIND)
 			WRITE_ONCE(link->status, DL_STATE_AVAILABLE);
 	}
@@ -597,13 +606,13 @@ static void device_links_purge(struct device *dev)
 
 	list_for_each_entry_safe_reverse(link, ln, &dev->links.suppliers, c_node) {
 		WARN_ON(link->status == DL_STATE_ACTIVE);
-		__device_link_del(link);
+		__device_link_del(&link->kref);
 	}
 
 	list_for_each_entry_safe_reverse(link, ln, &dev->links.consumers, s_node) {
 		WARN_ON(link->status != DL_STATE_DORMANT &&
 			link->status != DL_STATE_NONE);
-		__device_link_del(link);
+		__device_link_del(&link->kref);
 	}
 
 	device_links_write_unlock();

drivers/base/power/power.h

@@ -31,6 +31,7 @@ struct wake_irq {
 	struct device *dev;
 	unsigned int status;
 	int irq;
+	const char *name;
 };
 
 extern void dev_pm_arm_wake_irq(struct wake_irq *wirq);

drivers/base/power/wakeirq.c

@@ -112,6 +112,7 @@ void dev_pm_clear_wake_irq(struct device *dev)
 		free_irq(wirq->irq, wirq);
 		wirq->status &= ~WAKE_IRQ_DEDICATED_MASK;
 	}
+	kfree(wirq->name);
 	kfree(wirq);
 }
 EXPORT_SYMBOL_GPL(dev_pm_clear_wake_irq);
@@ -184,6 +185,12 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 	if (!wirq)
 		return -ENOMEM;
 
+	wirq->name = kasprintf(GFP_KERNEL, "%s:wakeup", dev_name(dev));
+	if (!wirq->name) {
+		err = -ENOMEM;
+		goto err_free;
+	}
+
 	wirq->dev = dev;
 	wirq->irq = irq;
 	irq_set_status_flags(irq, IRQ_NOAUTOEN);
@@ -196,9 +203,9 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 	 * so we use a threaded irq.
 	 */
 	err = request_threaded_irq(irq, NULL, handle_threaded_wake_irq,
-				   IRQF_ONESHOT, dev_name(dev), wirq);
+				   IRQF_ONESHOT, wirq->name, wirq);
 	if (err)
-		goto err_free;
+		goto err_free_name;
 
 	err = dev_pm_attach_wake_irq(dev, irq, wirq);
 	if (err)
@@ -210,6 +217,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 
 err_free_irq:
 	free_irq(irq, wirq);
+err_free_name:
+	kfree(wirq->name);
 err_free:
 	kfree(wirq);
 

drivers/pcmcia/cs.c

@@ -452,17 +452,20 @@ static int socket_insert(struct pcmcia_socket *skt)
 
 static int socket_suspend(struct pcmcia_socket *skt)
 {
-	if (skt->state & SOCKET_SUSPEND)
+	if ((skt->state & SOCKET_SUSPEND) && !(skt->state & SOCKET_IN_RESUME))
 		return -EBUSY;
 
 	mutex_lock(&skt->ops_mutex);
-	skt->suspended_state = skt->state;
+	/* store state on first suspend, but not after spurious wakeups */
+	if (!(skt->state & SOCKET_IN_RESUME))
+		skt->suspended_state = skt->state;
 
 	skt->socket = dead_socket;
 	skt->ops->set_socket(skt, &skt->socket);
 	if (skt->ops->suspend)
 		skt->ops->suspend(skt);
 	skt->state |= SOCKET_SUSPEND;
+	skt->state &= ~SOCKET_IN_RESUME;
 	mutex_unlock(&skt->ops_mutex);
 	return 0;
 }
@@ -475,6 +478,7 @@ static int socket_early_resume(struct pcmcia_socket *skt)
 	skt->ops->set_socket(skt, &skt->socket);
 	if (skt->state & SOCKET_PRESENT)
 		skt->resume_status = socket_setup(skt, resume_delay);
+	skt->state |= SOCKET_IN_RESUME;
 	mutex_unlock(&skt->ops_mutex);
 	return 0;
 }
@@ -484,7 +488,7 @@ static int socket_late_resume(struct pcmcia_socket *skt)
 	int ret = 0;
 
 	mutex_lock(&skt->ops_mutex);
-	skt->state &= ~SOCKET_SUSPEND;
+	skt->state &= ~(SOCKET_SUSPEND | SOCKET_IN_RESUME);
 	mutex_unlock(&skt->ops_mutex);
 
 	if (!(skt->state & SOCKET_PRESENT)) {

drivers/pcmcia/cs_internal.h

@@ -70,6 +70,7 @@ struct pccard_resource_ops {
 /* Flags in socket state */
 #define SOCKET_PRESENT		0x0008
 #define SOCKET_INUSE		0x0010
+#define SOCKET_IN_RESUME	0x0040
 #define SOCKET_SUSPEND		0x0080
 #define SOCKET_WIN_REQ(i)	(0x0100<<(i))
 #define SOCKET_CARDBUS		0x8000

include/linux/device.h

@@ -769,6 +769,7 @@ enum device_link_state {
  * @status: The state of the link (with respect to the presence of drivers).
  * @flags: Link flags.
  * @rpm_active: Whether or not the consumer device is runtime-PM-active.
+ * @kref: Count repeated addition of the same link.
  * @rcu_head: An RCU head to use for deferred execution of SRCU callbacks.
  */
 struct device_link {
@@ -779,6 +780,7 @@ struct device_link {
 	enum device_link_state status;
 	u32 flags;
 	bool rpm_active;
+	struct kref kref;
 #ifdef CONFIG_SRCU
 	struct rcu_head rcu_head;
 #endif

kernel/power/hibernate.c

@@ -1053,7 +1053,7 @@ static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
 	lock_system_sleep();
 	swsusp_resume_device = res;
 	unlock_system_sleep();
-	pr_info("Starting manual resume from disk\n");
+	pm_pr_dbg("Configured resume from disk to %u\n", swsusp_resume_device);
 	noresume = 0;
 	software_resume();
 	return n;
@@ -1061,6 +1061,29 @@ static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr,
 
 power_attr(resume);
 
+static ssize_t resume_offset_show(struct kobject *kobj,
+				  struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block);
+}
+
+static ssize_t resume_offset_store(struct kobject *kobj,
+				   struct kobj_attribute *attr, const char *buf,
+				   size_t n)
+{
+	unsigned long long offset;
+	int rc;
+
+	rc = kstrtoull(buf, 0, &offset);
+	if (rc)
+		return rc;
+	swsusp_resume_block = offset;
+
+	return n;
+}
+
+power_attr(resume_offset);
+
 static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr,
 			       char *buf)
 {
@@ -1106,6 +1129,7 @@ power_attr(reserved_size);
 
 static struct attribute * g[] = {
 	&disk_attr.attr,
+	&resume_offset_attr.attr,
 	&resume_attr.attr,
 	&image_size_attr.attr,
 	&reserved_size_attr.attr,