[media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411

The newest variants of the HVR-1600 have an s5h1411/tda18271 for the digital
frontend.  Add support for these boards.

Thanks to Hauppauge Computer Works for providing sample hardware.

[awalls@md.metrocast.net: Changed an additional log message to clarify for
the end user that the driver is defaulting to an original HVR-1600 for
unknown model numbers.]

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Devin Heitmueller 2011-02-26 02:44:38 -03:00 committed by Mauro Carvalho Chehab
parent d213ad0836
commit e3bfeabbf5
4 changed files with 112 additions and 4 deletions

View File

@ -95,6 +95,53 @@ static const struct cx18_card cx18_card_hvr1600_esmt = {
.i2c = &cx18_i2c_std,
};
static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
.type = CX18_CARD_HVR_1600_S5H1411,
.name = "Hauppauge HVR-1600",
.comment = "Simultaneous Digital and Analog TV capture supported\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_418_AV,
.hw_muxer = CX18_HW_CS5345,
.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
CX18_HW_CS5345 | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL |
CX18_HW_Z8F0811_IR_HAUP,
.video_inputs = {
{ CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 },
{ CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 },
{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 },
{ CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 },
{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 },
{ CX18_CARD_INPUT_LINE_IN1,
CX18_AV_AUDIO_SERIAL1, CS5345_IN_2 },
{ CX18_CARD_INPUT_LINE_IN2,
CX18_AV_AUDIO_SERIAL1, CS5345_IN_3 },
},
.radio_input = { CX18_CARD_INPUT_AUD_TUNER,
CX18_AV_AUDIO_SERIAL1, CS5345_IN_4 },
.ddr = {
/* ESMT M13S128324A-5B memory */
.chip_config = 0x003,
.refresh = 0x30c,
.timing1 = 0x44220e82,
.timing2 = 0x08,
.tune_lane = 0,
.initial_emrs = 0,
},
.gpio_init.initial_value = 0x3001,
.gpio_init.direction = 0x3001,
.gpio_i2c_slave_reset = {
.active_lo_mask = 0x3001,
.msecs_asserted = 10,
.msecs_recovery = 40,
.ir_reset_mask = 0x0001,
},
.i2c = &cx18_i2c_std,
};
static const struct cx18_card cx18_card_hvr1600_samsung = {
.type = CX18_CARD_HVR_1600_SAMSUNG,
.name = "Hauppauge HVR-1600 (Preproduction)",
@ -523,7 +570,8 @@ static const struct cx18_card *cx18_card_list[] = {
&cx18_card_toshiba_qosmio_dvbt,
&cx18_card_leadtek_pvr2100,
&cx18_card_leadtek_dvr3100h,
&cx18_card_gotview_dvd3
&cx18_card_gotview_dvd3,
&cx18_card_hvr1600_s5h1411
};
const struct cx18_card *cx18_get_card(u16 index)

View File

@ -157,6 +157,7 @@ MODULE_PARM_DESC(cardtype,
"\t\t\t 7 = Leadtek WinFast PVR2100\n"
"\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
"\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
"\t\t\t 10 = Hauppauge HVR 1600 (S5H1411)\n"
"\t\t\t 0 = Autodetect (default)\n"
"\t\t\t-1 = Ignore this card\n\t\t");
MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@ -337,6 +338,7 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
case CX18_CARD_HVR_1600_S5H1411:
tveeprom_hauppauge_analog(&c, tv, eedata);
break;
case CX18_CARD_YUAN_MPC718:
@ -365,7 +367,25 @@ static void cx18_process_eeprom(struct cx18 *cx)
from the model number. Use the cardtype module option if you
have one of these preproduction models. */
switch (tv.model) {
case 74000 ... 74999:
case 74301: /* Retail models */
case 74321:
case 74351: /* OEM models */
case 74361:
/* Digital side is s5h1411/tda18271 */
cx->card = cx18_get_card(CX18_CARD_HVR_1600_S5H1411);
break;
case 74021: /* Retail models */
case 74031:
case 74041:
case 74141:
case 74541: /* OEM models */
case 74551:
case 74591:
case 74651:
case 74691:
case 74751:
case 74891:
/* Digital side is s5h1409/mxl5005s */
cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
break;
case 0x718:
@ -377,7 +397,8 @@ static void cx18_process_eeprom(struct cx18 *cx)
CX18_ERR("Invalid EEPROM\n");
return;
default:
CX18_ERR("Unknown model %d, defaulting to HVR-1600\n", tv.model);
CX18_ERR("Unknown model %d, defaulting to original HVR-1600 "
"(cardtype=1)\n", tv.model);
cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
break;
}

View File

@ -85,7 +85,8 @@
#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */
#define CX18_CARD_GOTVIEW_PCI_DVD3 8 /* GoTView PCI DVD3 Hybrid */
#define CX18_CARD_LAST 8
#define CX18_CARD_HVR_1600_S5H1411 9 /* Hauppauge HVR 1600 s5h1411/tda18271*/
#define CX18_CARD_LAST 9
#define CX18_ENC_STREAM_TYPE_MPG 0
#define CX18_ENC_STREAM_TYPE_TS 1

View File

@ -29,6 +29,8 @@
#include "cx18-gpio.h"
#include "s5h1409.h"
#include "mxl5005s.h"
#include "s5h1411.h"
#include "tda18271.h"
#include "zl10353.h"
#include <linux/firmware.h>
@ -76,6 +78,32 @@ static struct s5h1409_config hauppauge_hvr1600_config = {
.hvr1600_opt = S5H1409_HVR1600_OPTIMIZE
};
/*
* CX18_CARD_HVR_1600_S5H1411
*/
static struct s5h1411_config hcw_s5h1411_config = {
.output_mode = S5H1411_SERIAL_OUTPUT,
.gpio = S5H1411_GPIO_OFF,
.vsb_if = S5H1411_IF_44000,
.qam_if = S5H1411_IF_4000,
.inversion = S5H1411_INVERSION_ON,
.status_mode = S5H1411_DEMODLOCKING,
.mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
static struct tda18271_std_map hauppauge_tda18271_std_map = {
.atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
.if_lvl = 6, .rfagc_top = 0x37 },
.qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
.if_lvl = 6, .rfagc_top = 0x37 },
};
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_DIGITAL,
.output_opt = TDA18271_OUTPUT_LT_OFF,
};
/*
* CX18_CARD_LEADTEK_DVR3100H
*/
@ -244,6 +272,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
switch (cx->card->type) {
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
case CX18_CARD_HVR_1600_S5H1411:
v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
v |= 0x00400000; /* Serial Mode */
v |= 0x00002000; /* Data Length - Byte */
@ -455,6 +484,15 @@ static int dvb_register(struct cx18_stream *stream)
ret = 0;
}
break;
case CX18_CARD_HVR_1600_S5H1411:
dvb->fe = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
&cx->i2c_adap[0]);
if (dvb->fe != NULL)
dvb_attach(tda18271_attach, dvb->fe,
0x60, &cx->i2c_adap[0],
&hauppauge_tda18271_config);
break;
case CX18_CARD_LEADTEK_DVR3100H:
dvb->fe = dvb_attach(zl10353_attach,
&leadtek_dvr3100h_demod,