diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
deleted file mode 100644
index e68ae5dec9c9..000000000000
--- a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom USB3 phy binding for northstar plus SoC
-The USB3 phy is internal to the SoC and is accessed using mdio interface.
-
-Required mdio bus properties:
-- reg: Should be 0x0 for SoC internal USB3 phy
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required USB3 PHY properties:
-- compatible: should be "brcm,nsp-usb3-phy"
-- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
-- usb3-ctrl-syscon: handler of syscon node defining physical address
-  of usb3 control register.
-- #phy-cells: must be 0
-
-Required usb3 control properties:
-- compatible: should be "brcm,nsp-usb3-ctrl"
-- reg: offset and length of the control registers
-
-Example:
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_phy: usb-phy@10 {
-			compatible = "brcm,nsp-usb3-phy";
-			reg = <0x10>;
-			usb3-ctrl-syscon = <&usb3_ctrl>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-	};
-
-	usb3_ctrl: syscon@104408 {
-		compatible = "brcm,nsp-usb3-ctrl", "syscon";
-		reg = <0x104408 0x3fc>;
-	};
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index dc5277ad1b5a..005cadb7a3f8 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -449,6 +449,7 @@ config PHY_QCOM_UFS
 config PHY_QCOM_USB_HS
 	tristate "Qualcomm USB HS PHY module"
 	depends on USB_ULPI_BUS
+	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
 	select GENERIC_PHY
 	help
 	  Support for the USB high-speed ULPI compliant phy on Qualcomm
@@ -510,12 +511,4 @@ config PHY_MESON8B_USB2
 	  and GXBB SoCs.
 	  If unsure, say N.
 
-config PHY_NSP_USB3
-	tristate "Broadcom NorthStar plus USB3 PHY driver"
-	depends on OF && (ARCH_BCM_NSP || COMPILE_TEST)
-	select GENERIC_PHY
-	default ARCH_BCM_NSP
-	help
-	  Enable this to support the Broadcom Northstar plus USB3 PHY.
-	  If unsure, say N.
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index e7b0feb1e125..dd8f3b5d2918 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -62,4 +62,3 @@ obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o
 obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o
-obj-$(CONFIG_PHY_NSP_USB3)		+= phy-bcm-nsp-usb3.o
diff --git a/drivers/phy/phy-bcm-nsp-usb3.c b/drivers/phy/phy-bcm-nsp-usb3.c
deleted file mode 100644
index 49024eaa5545..000000000000
--- a/drivers/phy/phy-bcm-nsp-usb3.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2016 Broadcom
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mdio.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/phy/phy.h>
-#include <linux/regmap.h>
-
-#define NSP_USB3_RST_CTRL_OFFSET	0x3f8
-
-/* mdio reg access */
-#define NSP_USB3_PHY_BASE_ADDR_REG	0x1f
-
-#define NSP_USB3_PHY_PLL30_BLOCK	0x8000
-#define NSP_USB3_PLL_CONTROL		0x01
-#define NSP_USB3_PLLA_CONTROL0		0x0a
-#define NSP_USB3_PLLA_CONTROL1		0x0b
-
-#define NSP_USB3_PHY_TX_PMD_BLOCK	0x8040
-#define NSP_USB3_TX_PMD_CONTROL1	0x01
-
-#define NSP_USB3_PHY_PIPE_BLOCK		0x8060
-#define NSP_USB3_LFPS_CMP		0x02
-#define NSP_USB3_LFPS_DEGLITCH		0x03
-
-struct nsp_usb3_phy {
-	struct regmap *usb3_ctrl;
-	struct phy *phy;
-	struct mdio_device *mdiodev;
-};
-
-static int nsp_usb3_phy_init(struct phy *phy)
-{
-	struct nsp_usb3_phy *iphy = phy_get_drvdata(phy);
-	struct mii_bus *bus = iphy->mdiodev->bus;
-	int addr = iphy->mdiodev->addr;
-	u32 data;
-	int rc;
-
-	rc = regmap_read(iphy->usb3_ctrl, 0, &data);
-	if (rc)
-		return rc;
-	data |= 1;
-	rc = regmap_write(iphy->usb3_ctrl, 0, data);
-	if (rc)
-		return rc;
-
-	rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 1);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
-			   NSP_USB3_PHY_PLL30_BLOCK);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x1000);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL0, 0x6400);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0xc000);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0x8000);
-	if (rc)
-		return rc;
-
-	rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 0);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x9000);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
-			   NSP_USB3_PHY_PIPE_BLOCK);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_CMP, 0xf30d);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_DEGLITCH, 0x6302);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
-			   NSP_USB3_PHY_TX_PMD_BLOCK);
-	if (rc)
-		return rc;
-
-	rc = mdiobus_write(bus, addr, NSP_USB3_TX_PMD_CONTROL1, 0x1003);
-
-	return rc;
-}
-
-static struct phy_ops nsp_usb3_phy_ops = {
-	.init	= nsp_usb3_phy_init,
-	.owner	= THIS_MODULE,
-};
-
-static int nsp_usb3_phy_probe(struct mdio_device *mdiodev)
-{
-	struct device *dev = &mdiodev->dev;
-	struct phy_provider *provider;
-	struct nsp_usb3_phy *iphy;
-
-	iphy = devm_kzalloc(dev, sizeof(*iphy), GFP_KERNEL);
-	if (!iphy)
-		return -ENOMEM;
-	iphy->mdiodev = mdiodev;
-
-	iphy->usb3_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
-						 "usb3-ctrl-syscon");
-	if (IS_ERR(iphy->usb3_ctrl))
-		return PTR_ERR(iphy->usb3_ctrl);
-
-	iphy->phy = devm_phy_create(dev, dev->of_node, &nsp_usb3_phy_ops);
-	if (IS_ERR(iphy->phy)) {
-		dev_err(dev, "failed to create PHY\n");
-		return PTR_ERR(iphy->phy);
-	}
-
-	phy_set_drvdata(iphy->phy, iphy);
-
-	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(provider)) {
-		dev_err(dev, "could not register PHY provider\n");
-		return PTR_ERR(provider);
-	}
-
-	return 0;
-}
-
-static const struct of_device_id nsp_usb3_phy_of_match[] = {
-	{.compatible = "brcm,nsp-usb3-phy",},
-	{ /* sentinel */ }
-};
-
-static struct mdio_driver nsp_usb3_phy_driver = {
-	.mdiodrv = {
-		.driver = {
-			.name = "nsp-usb3-phy",
-			.of_match_table = nsp_usb3_phy_of_match,
-		},
-	},
-	.probe = nsp_usb3_phy_probe,
-};
-
-mdio_module_driver(nsp_usb3_phy_driver);
-
-MODULE_DESCRIPTION("Broadcom NSP USB3 PHY driver");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com");
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
index 4f60b83641d5..60baf25d98e2 100644
--- a/drivers/phy/phy-exynos-pcie.c
+++ b/drivers/phy/phy-exynos-pcie.c
@@ -254,8 +254,8 @@ static int exynos_pcie_phy_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	exynos_phy->blk_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(exynos_phy->phy_base))
-		return PTR_ERR(exynos_phy->phy_base);
+	if (IS_ERR(exynos_phy->blk_base))
+		return PTR_ERR(exynos_phy->blk_base);
 
 	exynos_phy->drv_data = drv_data;
 
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index f03692ec5520..8fb309a0ff6b 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1381,7 +1381,7 @@ static int usbtmc_probe(struct usb_interface *intf,
 
 	dev_dbg(&intf->dev, "%s called\n", __func__);
 
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
@@ -1444,6 +1444,13 @@ static int usbtmc_probe(struct usb_interface *intf,
 			break;
 		}
 	}
+
+	if (!data->bulk_out || !data->bulk_in) {
+		dev_err(&intf->dev, "bulk endpoints not found\n");
+		retcode = -ENODEV;
+		goto err_put;
+	}
+
 	/* Find int endpoint */
 	for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) {
 		endpoint = &iface_desc->endpoint[n].desc;
@@ -1469,8 +1476,10 @@ static int usbtmc_probe(struct usb_interface *intf,
 	if (data->iin_ep_present) {
 		/* allocate int urb */
 		data->iin_urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (!data->iin_urb)
+		if (!data->iin_urb) {
+			retcode = -ENOMEM;
 			goto error_register;
+		}
 
 		/* Protect interrupt in endpoint data until iin_urb is freed */
 		kref_get(&data->kref);
@@ -1478,8 +1487,10 @@ static int usbtmc_probe(struct usb_interface *intf,
 		/* allocate buffer for interrupt in */
 		data->iin_buffer = kmalloc(data->iin_wMaxPacketSize,
 					GFP_KERNEL);
-		if (!data->iin_buffer)
+		if (!data->iin_buffer) {
+			retcode = -ENOMEM;
 			goto error_register;
+		}
 
 		/* fill interrupt urb */
 		usb_fill_int_urb(data->iin_urb, data->usb_dev,
@@ -1512,6 +1523,7 @@ error_register:
 	sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp);
 	sysfs_remove_group(&intf->dev.kobj, &data_attr_grp);
 	usbtmc_free_int(data);
+err_put:
 	kref_put(&data->kref, usbtmc_delete);
 	return retcode;
 }
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 25dbd8c7aec7..4be52c602e9b 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -280,6 +280,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 
 			/*
 			 * Adjust bInterval for quirked devices.
+			 */
+			/*
+			 * This quirk fixes bIntervals reported in ms.
+			 */
+			if (to_usb_device(ddev)->quirks &
+				USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
+				n = clamp(fls(d->bInterval) + 3, i, j);
+				i = j = n;
+			}
+			/*
 			 * This quirk fixes bIntervals reported in
 			 * linear microframes.
 			 */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f0dd08198d74..5286bf67869a 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4275,7 +4275,7 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
 	struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
 	int connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN;
 
-	if (!udev->usb2_hw_lpm_capable)
+	if (!udev->usb2_hw_lpm_capable || !udev->bos)
 		return;
 
 	if (hub)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 24f9f98968a5..96b21b0dac1e 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -170,6 +170,14 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* M-Systems Flash Disk Pioneers */
 	{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Baum Vario Ultra */
+	{ USB_DEVICE(0x0904, 0x6101), .driver_info =
+			USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+	{ USB_DEVICE(0x0904, 0x6102), .driver_info =
+			USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+	{ USB_DEVICE(0x0904, 0x6103), .driver_info =
+			USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
+
 	/* Keytouch QWERTY Panel keyboard */
 	{ USB_DEVICE(0x0926, 0x3333), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0d75158e43fe..79e7a3480d51 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -171,6 +171,7 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status)
 {
 	struct dwc3			*dwc = dep->dwc;
+	unsigned int			unmap_after_complete = false;
 
 	req->started = false;
 	list_del(&req->list);
@@ -180,11 +181,19 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
 
-	if (dwc->ep0_bounced && dep->number <= 1)
+	/*
+	 * NOTICE we don't want to unmap before calling ->complete() if we're
+	 * dealing with a bounced ep0 request. If we unmap it here, we would end
+	 * up overwritting the contents of req->buf and this could confuse the
+	 * gadget driver.
+	 */
+	if (dwc->ep0_bounced && dep->number <= 1) {
 		dwc->ep0_bounced = false;
-
-	usb_gadget_unmap_request_by_dev(dwc->sysdev,
-			&req->request, req->direction);
+		unmap_after_complete = true;
+	} else {
+		usb_gadget_unmap_request_by_dev(dwc->sysdev,
+				&req->request, req->direction);
+	}
 
 	trace_dwc3_gadget_giveback(req);
 
@@ -192,6 +201,10 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	usb_gadget_giveback_request(&dep->endpoint, &req->request);
 	spin_lock(&dwc->lock);
 
+	if (unmap_after_complete)
+		usb_gadget_unmap_request_by_dev(dwc->sysdev,
+				&req->request, req->direction);
+
 	if (dep->number > 1)
 		pm_runtime_put(dwc->dev);
 }
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index a30766ca4226..5e3828d9dac7 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -535,13 +535,15 @@ static int acm_notify_serial_state(struct f_acm *acm)
 {
 	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
 	int			status;
+	__le16			serial_state;
 
 	spin_lock(&acm->lock);
 	if (acm->notify_req) {
 		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
 			acm->port_num, acm->serial_state);
+		serial_state = cpu_to_le16(acm->serial_state);
 		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
-				0, &acm->serial_state, sizeof(acm->serial_state));
+				0, &serial_state, sizeof(acm->serial_state));
 	} else {
 		acm->pending = true;
 		status = 0;
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 89b48bcc377a..5eea44823ca0 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -367,7 +367,7 @@ try_again:
 	count  = min_t(unsigned, count, hidg->report_length);
 
 	spin_unlock_irqrestore(&hidg->write_spinlock, flags);
-	status = copy_from_user(hidg->req->buf, buffer, count);
+	status = copy_from_user(req->buf, buffer, count);
 
 	if (status != 0) {
 		ERROR(hidg->func.config->cdev,
@@ -378,9 +378,9 @@ try_again:
 
 	spin_lock_irqsave(&hidg->write_spinlock, flags);
 
-	/* we our function has been disabled by host */
+	/* when our function has been disabled by host */
 	if (!hidg->req) {
-		free_ep_req(hidg->in_ep, hidg->req);
+		free_ep_req(hidg->in_ep, req);
 		/*
 		 * TODO
 		 * Should we fail with error here?
@@ -394,7 +394,7 @@ try_again:
 	req->complete = f_hidg_req_complete;
 	req->context  = hidg;
 
-	status = usb_ep_queue(hidg->in_ep, hidg->req, GFP_ATOMIC);
+	status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC);
 	if (status < 0) {
 		ERROR(hidg->func.config->cdev,
 			"usb_ep_queue error on int endpoint %zd\n", status);
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 29b41b5dee04..f8a1881609a2 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -594,6 +594,14 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	opts->streaming_maxpacket = clamp(opts->streaming_maxpacket, 1U, 3072U);
 	opts->streaming_maxburst = min(opts->streaming_maxburst, 15U);
 
+	/* For SS, wMaxPacketSize has to be 1024 if bMaxBurst is not 0 */
+	if (opts->streaming_maxburst &&
+	    (opts->streaming_maxpacket % 1024) != 0) {
+		opts->streaming_maxpacket = roundup(opts->streaming_maxpacket, 1024);
+		INFO(cdev, "overriding streaming_maxpacket to %d\n",
+		     opts->streaming_maxpacket);
+	}
+
 	/* Fill in the FS/HS/SS Video Streaming specific descriptors from the
 	 * module parameters.
 	 *
@@ -625,7 +633,7 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc_ss_streaming_comp.bMaxBurst = opts->streaming_maxburst;
 	uvc_ss_streaming_comp.wBytesPerInterval =
 		cpu_to_le16(max_packet_size * max_packet_mult *
-			    opts->streaming_maxburst);
+			    (opts->streaming_maxburst + 1));
 
 	/* Allocate endpoints. */
 	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index a97da645c1b9..8a365aad66fe 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1523,7 +1523,6 @@ static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
 		td = phys_to_virt(addr);
 		addr2 = (dma_addr_t)td->next;
 		pci_pool_free(dev->data_requests, td, addr);
-		td->next = 0x00;
 		addr = addr2;
 	}
 	req->chain_len = 1;
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 8b9fd7534f69..502bfe30a077 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -347,6 +347,9 @@ static int idmouse_probe(struct usb_interface *interface,
 	if (iface_desc->desc.bInterfaceClass != 0x0A)
 		return -ENODEV;
 
+	if (iface_desc->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL)
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index 77176511658f..d3d124753266 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -366,6 +366,10 @@ static int lvs_rh_probe(struct usb_interface *intf,
 
 	hdev = interface_to_usbdev(intf);
 	desc = intf->cur_altsetting;
+
+	if (desc->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	endpoint = &desc->endpoint[0].desc;
 
 	/* valid only for SS root hub */
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index e45a3a680db8..07014cad6dbe 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -709,6 +709,11 @@ static int uss720_probe(struct usb_interface *intf,
 
 	interface = intf->cur_altsetting;
 
+	if (interface->desc.bNumEndpoints < 3) {
+		usb_put_dev(usbdev);
+		return -ENODEV;
+	}
+
 	/*
 	 * Allocate parport interface 
 	 */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d8bae6ca8904..0c3664ab705e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2490,8 +2490,8 @@ static int musb_remove(struct platform_device *pdev)
 	musb_host_cleanup(musb);
 	musb_gadget_cleanup(musb);
 
-	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
+	spin_lock_irqsave(&musb->lock, flags);
 	musb_disable_interrupts(musb);
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	spin_unlock_irqrestore(&musb->lock, flags);
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 00e272bfee39..355655f8a3fb 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -238,8 +238,27 @@ static void cppi41_dma_callback(void *private_data,
 			transferred < cppi41_channel->packet_sz)
 		cppi41_channel->prog_len = 0;
 
-	if (cppi41_channel->is_tx)
-		empty = musb_is_tx_fifo_empty(hw_ep);
+	if (cppi41_channel->is_tx) {
+		u8 type;
+
+		if (is_host_active(musb))
+			type = hw_ep->out_qh->type;
+		else
+			type = hw_ep->ep_in.type;
+
+		if (type == USB_ENDPOINT_XFER_ISOC)
+			/*
+			 * Don't use the early-TX-interrupt workaround below
+			 * for Isoch transfter. Since Isoch are periodic
+			 * transfer, by the time the next transfer is
+			 * scheduled, the current one should be done already.
+			 *
+			 * This avoids audio playback underrun issue.
+			 */
+			empty = true;
+		else
+			empty = musb_is_tx_fifo_empty(hw_ep);
+	}
 
 	if (!cppi41_channel->is_tx || empty) {
 		cppi41_trans_done(cppi41_channel);
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 7c047c4a2565..9c7ee26ef388 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -933,7 +933,7 @@ static int dsps_probe(struct platform_device *pdev)
 	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
 		ret = dsps_setup_optional_vbus_irq(pdev, glue);
 		if (ret)
-			return ret;
+			goto err_iounmap;
 	}
 
 	platform_set_drvdata(pdev, glue);
@@ -946,6 +946,8 @@ static int dsps_probe(struct platform_device *pdev)
 
 err:
 	pm_runtime_disable(&pdev->dev);
+err_iounmap:
+	iounmap(glue->usbss_base);
 	return ret;
 }
 
@@ -956,6 +958,7 @@ static int dsps_remove(struct platform_device *pdev)
 	platform_device_unregister(glue->musb);
 
 	pm_runtime_disable(&pdev->dev);
+	iounmap(glue->usbss_base);
 
 	return 0;
 }
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 42cc72e54c05..af67a0de6b5d 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -233,6 +233,14 @@ static void option_instat_callback(struct urb *urb);
 #define BANDRICH_PRODUCT_1012			0x1012
 
 #define QUALCOMM_VENDOR_ID			0x05C6
+/* These Quectel products use Qualcomm's vendor ID */
+#define QUECTEL_PRODUCT_UC20			0x9003
+#define QUECTEL_PRODUCT_UC15			0x9090
+
+#define QUECTEL_VENDOR_ID			0x2c7c
+/* These Quectel products use Quectel's vendor ID */
+#define QUECTEL_PRODUCT_EC21			0x0121
+#define QUECTEL_PRODUCT_EC25			0x0125
 
 #define CMOTECH_VENDOR_ID			0x16d8
 #define CMOTECH_PRODUCT_6001			0x6001
@@ -1161,7 +1169,14 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
-	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9003), /* Quectel UC20 */
+	/* Quectel products using Qualcomm vendor ID */
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	/* Quectel products using Quectel vendor ID */
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
+	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
 	  .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 696458db7e3c..38b3f0d8cd58 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -169,6 +169,8 @@ static const struct usb_device_id id_table[] = {
 	{DEVICE_SWI(0x413c, 0x81a9)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81b1)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
 	{DEVICE_SWI(0x413c, 0x81b3)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
+	{DEVICE_SWI(0x413c, 0x81b5)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81b6)},	/* Dell Wireless 5811e QDL */
 
 	/* Huawei devices */
 	{DEVICE_HWI(0x03f0, 0x581d)},	/* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */
diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c
index 252c7bd9218a..d01496fd27fe 100644
--- a/drivers/usb/wusbcore/wa-hc.c
+++ b/drivers/usb/wusbcore/wa-hc.c
@@ -39,6 +39,9 @@ int wa_create(struct wahc *wa, struct usb_interface *iface,
 	int result;
 	struct device *dev = &iface->dev;
 
+	if (iface->cur_altsetting->desc.bNumEndpoints < 3)
+		return -ENODEV;
+
 	result = wa_rpipes_create(wa);
 	if (result < 0)
 		goto error_rpipes_create;
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
index 0aa6c3c29d17..35a1e777b449 100644
--- a/drivers/uwb/hwa-rc.c
+++ b/drivers/uwb/hwa-rc.c
@@ -823,6 +823,9 @@ static int hwarc_probe(struct usb_interface *iface,
 	struct hwarc *hwarc;
 	struct device *dev = &iface->dev;
 
+	if (iface->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	result = -ENOMEM;
 	uwb_rc = uwb_rc_alloc();
 	if (uwb_rc == NULL) {
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
index 2bfc846ac071..6345e85822a4 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -362,6 +362,9 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
 				 result);
 	}
 
+	if (iface->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	result = -ENOMEM;
 	i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
 	if (i1480_usb == NULL) {
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 1d0043dc34e4..de2a722fe3cf 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -50,4 +50,10 @@
 /* device can't handle Link Power Management */
 #define USB_QUIRK_NO_LPM			BIT(10)
 
+/*
+ * Device reports its bInterval as linear frames instead of the
+ * USB 2.0 calculation.
+ */
+#define USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL	BIT(11)
+
 #endif /* __LINUX_USB_QUIRKS_H */