mmc: host: sdhci-pci: Add Genesys Logic GL975x support

Add support for the GL9750 and GL9755 chipsets.

Enable v4 mode and wait 5ms after set 1.8V signal enable for GL9750/
GL9755. Fix the value of SDHCI_MAX_CURRENT register and use the vendor
tuning flow for GL9750.

Co-developed-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Michael K Johnson <johnsonm@danlj.org>
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Ben Chuang 2019-09-11 15:23:44 +08:00 committed by Ulf Hansson
parent b960bc448a
commit e51df6ce66
5 changed files with 361 additions and 1 deletions

View File

@ -94,6 +94,7 @@ config MMC_SDHCI_PCI
depends on MMC_SDHCI && PCI
select MMC_CQHCI
select IOSF_MBI if X86
select MMC_SDHCI_IO_ACCESSORS
help
This selects the PCI Secure Digital Host Controller Interface.
Most controllers found today are PCI devices.

View File

@ -13,7 +13,7 @@ obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
sdhci-pci-y += sdhci-pci-core.o sdhci-pci-o2micro.o sdhci-pci-arasan.o \
sdhci-pci-dwc-mshc.o
sdhci-pci-dwc-mshc.o sdhci-pci-gli.o
obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(CONFIG_MMC_SDHCI_ACPI) += sdhci-acpi.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o

View File

@ -1685,6 +1685,8 @@ static const struct pci_device_id pci_ids[] = {
SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
SDHCI_PCI_DEVICE(SYNOPSYS, DWC_MSHC, snps),
SDHCI_PCI_DEVICE(GLI, 9750, gl9750),
SDHCI_PCI_DEVICE(GLI, 9755, gl9755),
SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
/* Generic SD host controller */
{PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},

View File

@ -0,0 +1,352 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Genesys Logic, Inc.
*
* Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
*
* Version: v0.9.0 (2019-08-08)
*/
#include <linux/bitfield.h>
#include <linux/bits.h>
#include <linux/pci.h>
#include <linux/mmc/mmc.h>
#include <linux/delay.h>
#include "sdhci.h"
#include "sdhci-pci.h"
/* Genesys Logic extra registers */
#define SDHCI_GLI_9750_WT 0x800
#define SDHCI_GLI_9750_WT_EN BIT(0)
#define GLI_9750_WT_EN_ON 0x1
#define GLI_9750_WT_EN_OFF 0x0
#define SDHCI_GLI_9750_DRIVING 0x860
#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
#define GLI_9750_DRIVING_1_VALUE 0xFFF
#define GLI_9750_DRIVING_2_VALUE 0x3
#define SDHCI_GLI_9750_PLL 0x864
#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
#define GLI_9750_PLL_TX2_INV_VALUE 0x1
#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
#define SDHCI_GLI_9750_SW_CTRL 0x874
#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
#define GLI_9750_SW_CTRL_4_VALUE 0x3
#define SDHCI_GLI_9750_MISC 0x878
#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
#define GLI_9750_MISC_TX1_INV_VALUE 0x0
#define GLI_9750_MISC_RX_INV_ON 0x1
#define GLI_9750_MISC_RX_INV_OFF 0x0
#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
#define GLI_MAX_TUNING_LOOP 40
/* Genesys Logic chipset */
static inline void gl9750_wt_on(struct sdhci_host *host)
{
u32 wt_value;
u32 wt_enable;
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
if (wt_enable == GLI_9750_WT_EN_ON)
return;
wt_value &= ~SDHCI_GLI_9750_WT_EN;
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
}
static inline void gl9750_wt_off(struct sdhci_host *host)
{
u32 wt_value;
u32 wt_enable;
wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
if (wt_enable == GLI_9750_WT_EN_OFF)
return;
wt_value &= ~SDHCI_GLI_9750_WT_EN;
wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
}
static void gli_set_9750(struct sdhci_host *host)
{
u32 driving_value;
u32 pll_value;
u32 sw_ctrl_value;
u32 misc_value;
u32 parameter_value;
u32 control_value;
u16 ctrl2;
gl9750_wt_on(host);
driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
GLI_9750_DRIVING_1_VALUE);
driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
GLI_9750_DRIVING_2_VALUE);
sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
GLI_9750_SW_CTRL_4_VALUE);
sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
/* reset the tuning flow after reinit and before starting tuning */
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
GLI_9750_PLL_TX2_INV_VALUE);
pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
GLI_9750_PLL_TX2_DLY_VALUE);
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
GLI_9750_MISC_TX1_INV_VALUE);
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_VALUE);
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
GLI_9750_MISC_TX1_DLY_VALUE);
parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
/* disable tuned clk */
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
/* enable tuning parameters control */
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
GLI_9750_TUNING_CONTROL_EN_ON);
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
/* write tuning parameters */
sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
/* disable tuning parameters control */
control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
GLI_9750_TUNING_CONTROL_EN_OFF);
sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
/* clear tuned clk */
ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
gl9750_wt_off(host);
}
static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
{
u32 misc_value;
gl9750_wt_on(host);
misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
if (b) {
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_ON);
} else {
misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
GLI_9750_MISC_RX_INV_OFF);
}
sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
gl9750_wt_off(host);
}
static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
{
int i;
int rx_inv;
for (rx_inv = 0; rx_inv < 2; rx_inv++) {
gli_set_9750_rx_inv(host, !!rx_inv);
sdhci_start_tuning(host);
for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
u16 ctrl;
sdhci_send_tuning(host, opcode);
if (!host->tuning_done) {
sdhci_abort_tuning(host, opcode);
break;
}
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
if (ctrl & SDHCI_CTRL_TUNED_CLK)
return 0; /* Success! */
break;
}
}
}
if (!host->tuning_done) {
pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
return -ETIMEDOUT;
}
pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
mmc_hostname(host->mmc));
sdhci_reset_tuning(host);
return -EAGAIN;
}
static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
{
host->mmc->retune_period = 0;
if (host->tuning_mode == SDHCI_TUNING_MODE_1)
host->mmc->retune_period = host->tuning_count;
gli_set_9750(host);
host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
sdhci_end_tuning(host);
return 0;
}
static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
return 0;
}
static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
{
struct sdhci_host *host = slot->host;
slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
sdhci_enable_v4_mode(host);
return 0;
}
static void sdhci_gli_voltage_switch(struct sdhci_host *host)
{
/*
* According to Section 3.6.1 signal voltage switch procedure in
* SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
* follows:
* (6) Set 1.8V Signal Enable in the Host Control 2 register.
* (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
* period.
* (8) If 1.8V Signal Enable is cleared by Host Controller, go to
* step (12).
*
* Wait 5ms after set 1.8V signal enable in Host Control 2 register
* to ensure 1.8V signal enable bit is set by GL9750/GL9755.
*/
usleep_range(5000, 5500);
}
static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
{
sdhci_reset(host, mask);
gli_set_9750(host);
}
static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
{
u32 value;
value = readl(host->ioaddr + reg);
if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
value |= 0xc8;
return value;
}
static const struct sdhci_ops sdhci_gl9755_ops = {
.set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
};
const struct sdhci_pci_fixes sdhci_gl9755 = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
.probe_slot = gli_probe_slot_gl9755,
.ops = &sdhci_gl9755_ops,
};
static const struct sdhci_ops sdhci_gl9750_ops = {
.read_l = sdhci_gl9750_readl,
.set_clock = sdhci_set_clock,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_gl9750_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.voltage_switch = sdhci_gli_voltage_switch,
.platform_execute_tuning = gl9750_execute_tuning,
};
const struct sdhci_pci_fixes sdhci_gl9750 = {
.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
.probe_slot = gli_probe_slot_gl9750,
.ops = &sdhci_gl9750_ops,
};

View File

@ -68,6 +68,9 @@
#define PCI_DEVICE_ID_SYNOPSYS_DWC_MSHC 0xc202
#define PCI_DEVICE_ID_GLI_9755 0x9755
#define PCI_DEVICE_ID_GLI_9750 0x9750
/*
* PCI device class and mask
*/
@ -188,5 +191,7 @@ int sdhci_pci_enable_dma(struct sdhci_host *host);
extern const struct sdhci_pci_fixes sdhci_arasan;
extern const struct sdhci_pci_fixes sdhci_snps;
extern const struct sdhci_pci_fixes sdhci_o2;
extern const struct sdhci_pci_fixes sdhci_gl9750;
extern const struct sdhci_pci_fixes sdhci_gl9755;
#endif /* __SDHCI_PCI_H */