mtd: rawnand: Change Kconfig titles and re-order a bit the list
This list is a mess, while some items should probably not be in the raw/ sub-directory, others are definitely at the right place but not with the right description. Write uniform titles and group IPs by vendor. NAND controllers will appear under the list named "Raw/parallel NAND flash controllers" while the other drivers will appear under "Misc". Software ECC engines will later be moved out of the raw/ directory. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This commit is contained in:
Miquel Raynal
parent
9bb94643b9
commit
e787be1f1d
|
|
@ -31,15 +31,13 @@ config MTD_NAND_ECC_SW_BCH
|
|||
ECC codes. They are used with NAND devices requiring more than 1 bit
|
||||
of error correction.
|
||||
|
||||
config MTD_SM_COMMON
|
||||
tristate
|
||||
default n
|
||||
comment "Raw/parallel NAND flash controllers"
|
||||
|
||||
config MTD_NAND_DENALI
|
||||
tristate
|
||||
|
||||
config MTD_NAND_DENALI_PCI
|
||||
tristate "Support Denali NAND controller on Intel Moorestown"
|
||||
tristate "Denali NAND controller on Intel Moorestown"
|
||||
select MTD_NAND_DENALI
|
||||
depends on PCI
|
||||
help
|
||||
|
|
@ -47,31 +45,22 @@ config MTD_NAND_DENALI_PCI
|
|||
Denali NAND controller core.
|
||||
|
||||
config MTD_NAND_DENALI_DT
|
||||
tristate "Support Denali NAND controller as a DT device"
|
||||
tristate "Denali NAND controller as a DT device"
|
||||
select MTD_NAND_DENALI
|
||||
depends on HAS_DMA && HAVE_CLK && OF
|
||||
help
|
||||
Enable the driver for NAND flash on platforms using a Denali NAND
|
||||
controller as a DT device.
|
||||
|
||||
config MTD_NAND_GPIO
|
||||
tristate "GPIO assisted NAND Flash driver"
|
||||
depends on GPIOLIB || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables a NAND flash driver where control signals are
|
||||
connected to GPIO pins, and commands and data are communicated
|
||||
via a memory mapped interface.
|
||||
|
||||
config MTD_NAND_AMS_DELTA
|
||||
tristate "NAND Flash device on Amstrad E3"
|
||||
tristate "Amstrad E3 NAND controller"
|
||||
depends on MACH_AMS_DELTA || COMPILE_TEST
|
||||
default y
|
||||
help
|
||||
Support for NAND flash on Amstrad E3 (Delta).
|
||||
|
||||
config MTD_NAND_OMAP2
|
||||
tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
|
||||
tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller"
|
||||
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
|
|
@ -93,18 +82,6 @@ config MTD_NAND_OMAP_BCH
|
|||
config MTD_NAND_OMAP_BCH_BUILD
|
||||
def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
|
||||
|
||||
config MTD_NAND_RICOH
|
||||
tristate "Ricoh xD card reader"
|
||||
default n
|
||||
depends on PCI
|
||||
select MTD_SM_COMMON
|
||||
help
|
||||
Enable support for Ricoh R5C852 xD card reader
|
||||
You also need to enable ether
|
||||
NAND SSFDC (SmartMedia) read only translation layer' or new
|
||||
expermental, readwrite
|
||||
'SmartMedia/xD new translation layer'
|
||||
|
||||
config MTD_NAND_AU1550
|
||||
tristate "Au1550/1200 NAND support"
|
||||
depends on MIPS_ALCHEMY
|
||||
|
|
@ -112,8 +89,15 @@ config MTD_NAND_AU1550
|
|||
This enables the driver for the NAND flash controller on the
|
||||
AMD/Alchemy 1550 SOC.
|
||||
|
||||
config MTD_NAND_NDFC
|
||||
tristate "IBM/MCC 4xx NAND controller"
|
||||
depends on 4xx
|
||||
select MTD_NAND_ECC_SW_HAMMING_SMC
|
||||
help
|
||||
NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
|
||||
|
||||
config MTD_NAND_S3C2410
|
||||
tristate "NAND Flash support for Samsung S3C SoCs"
|
||||
tristate "Samsung S3C NAND controller"
|
||||
depends on ARCH_S3C24XX || ARCH_S3C64XX
|
||||
help
|
||||
This enables the NAND flash controller on the S3C24xx and S3C64xx
|
||||
|
|
@ -123,18 +107,11 @@ config MTD_NAND_S3C2410
|
|||
must advertise a platform_device for the driver to attach.
|
||||
|
||||
config MTD_NAND_S3C2410_DEBUG
|
||||
bool "Samsung S3C NAND driver debug"
|
||||
bool "Samsung S3C NAND controller debug"
|
||||
depends on MTD_NAND_S3C2410
|
||||
help
|
||||
Enable debugging of the S3C NAND driver
|
||||
|
||||
config MTD_NAND_NDFC
|
||||
tristate "NDFC NanD Flash Controller"
|
||||
depends on 4xx
|
||||
select MTD_NAND_ECC_SW_HAMMING_SMC
|
||||
help
|
||||
NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
|
||||
|
||||
config MTD_NAND_S3C2410_CLKSTOP
|
||||
bool "Samsung S3C NAND IDLE clock stop"
|
||||
depends on MTD_NAND_S3C2410
|
||||
|
|
@ -146,12 +123,358 @@ config MTD_NAND_S3C2410_CLKSTOP
|
|||
approximately 5mA of power when there is nothing happening.
|
||||
|
||||
config MTD_NAND_TANGO
|
||||
tristate "NAND Flash support for Tango chips"
|
||||
tristate "Tango NAND controller"
|
||||
depends on ARCH_TANGO || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables the NAND Flash controller on Tango chips.
|
||||
|
||||
config MTD_NAND_SHARPSL
|
||||
tristate "Sharp SL Series (C7xx + others) NAND controller"
|
||||
depends on ARCH_PXA || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
|
||||
config MTD_NAND_CAFE
|
||||
tristate "OLPC CAFÉ NAND controller"
|
||||
depends on PCI
|
||||
select REED_SOLOMON
|
||||
select REED_SOLOMON_DEC16
|
||||
help
|
||||
Use NAND flash attached to the CAFÉ chip designed for the OLPC
|
||||
laptop.
|
||||
|
||||
config MTD_NAND_CS553X
|
||||
tristate "CS5535/CS5536 (AMD Geode companion) NAND controller"
|
||||
depends on X86_32
|
||||
depends on !UML && HAS_IOMEM
|
||||
help
|
||||
The CS553x companion chips for the AMD Geode processor
|
||||
include NAND flash controllers with built-in hardware ECC
|
||||
capabilities; enabling this option will allow you to use
|
||||
these. The driver will check the MSRs to verify that the
|
||||
controller is enabled for NAND, and currently requires that
|
||||
the controller be in MMIO mode.
|
||||
|
||||
If you say "m", the module will be called cs553x_nand.
|
||||
|
||||
config MTD_NAND_ATMEL
|
||||
tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller"
|
||||
depends on ARCH_AT91 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
select GENERIC_ALLOCATOR
|
||||
select MFD_ATMEL_SMC
|
||||
help
|
||||
Enables support for NAND Flash / Smart Media Card interface
|
||||
on Atmel AT91 processors.
|
||||
|
||||
config MTD_NAND_ORION
|
||||
tristate "Marvell Orion NAND controller"
|
||||
depends on PLAT_ORION
|
||||
help
|
||||
This enables the NAND flash controller on Orion machines.
|
||||
|
||||
No board specific support is done by this driver, each board
|
||||
must advertise a platform_device for the driver to attach.
|
||||
|
||||
config MTD_NAND_MARVELL
|
||||
tristate "Marvell EBU NAND controller"
|
||||
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
|
||||
COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the NAND flash controller driver for Marvell boards,
|
||||
including:
|
||||
- PXA3xx processors (NFCv1)
|
||||
- 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2)
|
||||
- 64-bit Aramda platforms (7k, 8k) (NFCv2)
|
||||
|
||||
config MTD_NAND_SLC_LPC32XX
|
||||
tristate "NXP LPC32xx SLC NAND controller"
|
||||
depends on ARCH_LPC32XX || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
|
||||
chips) NAND controller. This is the default for the PHYTEC 3250
|
||||
reference board which contains a NAND256R3A2CZA6 chip.
|
||||
|
||||
Please check the actual NAND chip connected and its support
|
||||
by the SLC NAND controller.
|
||||
|
||||
config MTD_NAND_MLC_LPC32XX
|
||||
tristate "NXP LPC32xx MLC NAND controller"
|
||||
depends on ARCH_LPC32XX || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
|
||||
controller. This is the default for the WORK92105 controller
|
||||
board.
|
||||
|
||||
Please check the actual NAND chip connected and its support
|
||||
by the MLC NAND controller.
|
||||
|
||||
config MTD_NAND_CM_X270
|
||||
tristate "CM-X270 modules NAND controller"
|
||||
depends on MACH_ARMCORE
|
||||
|
||||
config MTD_NAND_PASEMI
|
||||
tristate "PA Semi PWRficient NAND controller"
|
||||
depends on PPC_PASEMI
|
||||
help
|
||||
Enables support for NAND Flash interface on PA Semi PWRficient
|
||||
based boards
|
||||
|
||||
config MTD_NAND_TMIO
|
||||
tristate "Toshiba Mobile IO NAND controller"
|
||||
depends on MFD_TMIO
|
||||
help
|
||||
Support for NAND flash connected to a Toshiba Mobile IO
|
||||
Controller in some PDAs, including the Sharp SL6000x.
|
||||
|
||||
config MTD_NAND_BRCMNAND
|
||||
tristate "Broadcom STB NAND controller"
|
||||
depends on ARM || ARM64 || MIPS || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables the Broadcom NAND controller driver. The controller was
|
||||
originally designed for Set-Top Box but is used on various BCM7xxx,
|
||||
BCM3xxx, BCM63xxx, iProc/Cygnus and more.
|
||||
|
||||
config MTD_NAND_BCM47XXNFLASH
|
||||
tristate "BCM4706 BCMA NAND controller"
|
||||
depends on BCMA_NFLASH
|
||||
depends on BCMA
|
||||
help
|
||||
BCMA bus can have various flash memories attached, they are
|
||||
registered by bcma as platform devices. This enables driver for
|
||||
NAND flash memories. For now only BCM4706 is supported.
|
||||
|
||||
config MTD_NAND_OXNAS
|
||||
tristate "Oxford Semiconductor NAND controller"
|
||||
depends on ARCH_OXNAS || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the NAND flash controller on Oxford Semiconductor SoCs.
|
||||
|
||||
config MTD_NAND_MPC5121_NFC
|
||||
tristate "MPC5121 NAND controller"
|
||||
depends on PPC_MPC512x
|
||||
help
|
||||
This enables the driver for the NAND flash controller on the
|
||||
MPC5121 SoC.
|
||||
|
||||
config MTD_NAND_GPMI_NAND
|
||||
tristate "Freescale GPMI NAND controller"
|
||||
depends on MXS_DMA
|
||||
help
|
||||
Enables NAND Flash support for IMX23, IMX28 or IMX6.
|
||||
The GPMI controller is very powerful, with the help of BCH
|
||||
module, it can do the hardware ECC. The GPMI supports several
|
||||
NAND flashs at the same time.
|
||||
|
||||
config MTD_NAND_FSL_ELBC
|
||||
tristate "Freescale eLBC NAND controller"
|
||||
depends on FSL_SOC
|
||||
select FSL_LBC
|
||||
help
|
||||
Various Freescale chips, including the 8313, include a NAND Flash
|
||||
Controller Module with built-in hardware ECC capabilities.
|
||||
Enabling this option will enable you to use this to control
|
||||
external NAND devices.
|
||||
|
||||
config MTD_NAND_FSL_IFC
|
||||
tristate "Freescale IFC NAND controller"
|
||||
depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
select FSL_IFC
|
||||
select MEMORY
|
||||
help
|
||||
Various Freescale chips e.g P1010, include a NAND Flash machine
|
||||
with built-in hardware ECC capabilities.
|
||||
Enabling this option will enable you to use this to control
|
||||
external NAND devices.
|
||||
|
||||
config MTD_NAND_FSL_UPM
|
||||
tristate "Freescale UPM NAND controller"
|
||||
depends on PPC_83xx || PPC_85xx
|
||||
select FSL_LBC
|
||||
help
|
||||
Enables support for NAND Flash chips wired onto Freescale PowerPC
|
||||
processor localbus with User-Programmable Machine support.
|
||||
|
||||
config MTD_NAND_VF610_NFC
|
||||
tristate "Freescale VF610/MPC5125 NAND controller"
|
||||
depends on (SOC_VF610 || COMPILE_TEST)
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND Flash Controller on some Freescale
|
||||
processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
|
||||
The driver supports a maximum 2k page size. With 2k pages and
|
||||
64 bytes or more of OOB, hardware ECC with up to 32-bit error
|
||||
correction is supported. Hardware ECC is only enabled through
|
||||
device tree.
|
||||
|
||||
config MTD_NAND_MXC
|
||||
tristate "Freescale MXC NAND controller"
|
||||
depends on ARCH_MXC || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the driver for the NAND flash controller on the
|
||||
MXC processors.
|
||||
|
||||
config MTD_NAND_SH_FLCTL
|
||||
tristate "Renesas SuperH FLCTL NAND controller"
|
||||
depends on SUPERH || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Several Renesas SuperH CPU has FLCTL. This option enables support
|
||||
for NAND Flash using FLCTL.
|
||||
|
||||
config MTD_NAND_DAVINCI
|
||||
tristate "DaVinci/Keystone NAND controller"
|
||||
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enable the driver for NAND flash chips on Texas Instruments
|
||||
DaVinci/Keystone processors.
|
||||
|
||||
config MTD_NAND_TXX9NDFMC
|
||||
tristate "TXx9 NAND controller"
|
||||
depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the NAND flash controller on the TXx9 SoCs.
|
||||
|
||||
config MTD_NAND_SOCRATES
|
||||
tristate "Socrates NAND controller"
|
||||
depends on SOCRATES
|
||||
help
|
||||
Enables support for NAND Flash chips wired onto Socrates board.
|
||||
|
||||
config MTD_NAND_NUC900
|
||||
tristate "Nuvoton NUC9xx/w90p910 NAND controller"
|
||||
depends on ARCH_W90X900 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the driver for the NAND Flash on evaluation board based
|
||||
on w90p910 / NUC9xx.
|
||||
|
||||
source "drivers/mtd/nand/raw/ingenic/Kconfig"
|
||||
|
||||
config MTD_NAND_FSMC
|
||||
tristate "ST Micros FSMC NAND controller"
|
||||
depends on OF && HAS_IOMEM
|
||||
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \
|
||||
COMPILE_TEST
|
||||
help
|
||||
Enables support for NAND Flash chips on the ST Microelectronics
|
||||
Flexible Static Memory Controller (FSMC)
|
||||
|
||||
config MTD_NAND_XWAY
|
||||
bool "Lantiq XWAY NAND controller"
|
||||
depends on LANTIQ && SOC_TYPE_XWAY
|
||||
help
|
||||
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
|
||||
to the External Bus Unit (EBU).
|
||||
|
||||
config MTD_NAND_SUNXI
|
||||
tristate "Allwinner NAND controller"
|
||||
depends on ARCH_SUNXI || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND Flash chips on Allwinner SoCs.
|
||||
|
||||
config MTD_NAND_HISI504
|
||||
tristate "Hisilicon Hip04 NAND controller"
|
||||
depends on ARCH_HISI || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND controller on Hisilicon SoC Hip04.
|
||||
|
||||
config MTD_NAND_QCOM
|
||||
tristate "QCOM NAND controller"
|
||||
depends on ARCH_QCOM || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
|
||||
controller. This controller is found on IPQ806x SoC.
|
||||
|
||||
config MTD_NAND_MTK
|
||||
tristate "MTK NAND controller"
|
||||
depends on ARCH_MEDIATEK || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND controller on MTK SoCs.
|
||||
This controller is found on mt27xx, mt81xx, mt65xx SoCs.
|
||||
|
||||
config MTD_NAND_TEGRA
|
||||
tristate "NVIDIA Tegra NAND controller"
|
||||
depends on ARCH_TEGRA || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND flash controller on NVIDIA Tegra SoC.
|
||||
The driver has been developed and tested on a Tegra 2 SoC. DMA
|
||||
support, raw read/write page as well as HW ECC read/write page
|
||||
is supported. Extra OOB bytes when using HW ECC are currently
|
||||
not supported.
|
||||
|
||||
config MTD_NAND_STM32_FMC2
|
||||
tristate "Support for NAND controller on STM32MP SoCs"
|
||||
depends on MACH_STM32MP157 || COMPILE_TEST
|
||||
help
|
||||
Enables support for NAND Flash chips on SoCs containing the FMC2
|
||||
NAND controller. This controller is found on STM32MP SoCs.
|
||||
The controller supports a maximum 8k page size and supports
|
||||
a maximum 8-bit correction error per sector of 512 bytes.
|
||||
|
||||
config MTD_NAND_MESON
|
||||
tristate "Support for NAND controller on Amlogic's Meson SoCs"
|
||||
depends on ARCH_MESON || COMPILE_TEST
|
||||
select MFD_SYSCON
|
||||
help
|
||||
Enables support for NAND controller on Amlogic's Meson SoCs.
|
||||
This controller is found on Meson SoCs.
|
||||
|
||||
config MTD_NAND_GPIO
|
||||
tristate "GPIO assisted NAND controller"
|
||||
depends on GPIOLIB || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables a NAND flash driver where control signals are
|
||||
connected to GPIO pins, and commands and data are communicated
|
||||
via a memory mapped interface.
|
||||
|
||||
config MTD_NAND_PLATFORM
|
||||
tristate "Generic NAND controller"
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This implements a generic NAND driver for on-SOC platform
|
||||
devices. You will need to provide platform-specific functions
|
||||
via platform_data.
|
||||
|
||||
comment "Misc"
|
||||
|
||||
config MTD_SM_COMMON
|
||||
tristate
|
||||
default n
|
||||
|
||||
config MTD_NAND_NANDSIM
|
||||
tristate "Support for NAND Flash Simulator"
|
||||
help
|
||||
The simulator may simulate various NAND flash chips for the
|
||||
MTD nand layer.
|
||||
|
||||
config MTD_NAND_RICOH
|
||||
tristate "Ricoh xD card reader"
|
||||
default n
|
||||
depends on PCI
|
||||
select MTD_SM_COMMON
|
||||
help
|
||||
Enable support for Ricoh R5C852 xD card reader
|
||||
You also need to enable ether
|
||||
NAND SSFDC (SmartMedia) read only translation layer' or new
|
||||
expermental, readwrite
|
||||
'SmartMedia/xD new translation layer'
|
||||
|
||||
config MTD_NAND_DISKONCHIP
|
||||
tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
|
||||
depends on HAS_IOMEM
|
||||
|
|
@ -222,323 +545,4 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
|
|||
load time (assuming you build diskonchip as a module) with the module
|
||||
parameter "inftl_bbt_write=1".
|
||||
|
||||
config MTD_NAND_SHARPSL
|
||||
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
|
||||
depends on ARCH_PXA || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
|
||||
config MTD_NAND_CAFE
|
||||
tristate "NAND support for OLPC CAFÉ chip"
|
||||
depends on PCI
|
||||
select REED_SOLOMON
|
||||
select REED_SOLOMON_DEC16
|
||||
help
|
||||
Use NAND flash attached to the CAFÉ chip designed for the OLPC
|
||||
laptop.
|
||||
|
||||
config MTD_NAND_CS553X
|
||||
tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
|
||||
depends on X86_32
|
||||
depends on !UML && HAS_IOMEM
|
||||
help
|
||||
The CS553x companion chips for the AMD Geode processor
|
||||
include NAND flash controllers with built-in hardware ECC
|
||||
capabilities; enabling this option will allow you to use
|
||||
these. The driver will check the MSRs to verify that the
|
||||
controller is enabled for NAND, and currently requires that
|
||||
the controller be in MMIO mode.
|
||||
|
||||
If you say "m", the module will be called cs553x_nand.
|
||||
|
||||
config MTD_NAND_ATMEL
|
||||
tristate "Support for NAND Flash / SmartMedia on AT91"
|
||||
depends on ARCH_AT91 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
select GENERIC_ALLOCATOR
|
||||
select MFD_ATMEL_SMC
|
||||
help
|
||||
Enables support for NAND Flash / Smart Media Card interface
|
||||
on Atmel AT91 processors.
|
||||
|
||||
config MTD_NAND_MARVELL
|
||||
tristate "NAND controller support on Marvell boards"
|
||||
depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \
|
||||
COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the NAND flash controller driver for Marvell boards,
|
||||
including:
|
||||
- PXA3xx processors (NFCv1)
|
||||
- 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2)
|
||||
- 64-bit Aramda platforms (7k, 8k) (NFCv2)
|
||||
|
||||
config MTD_NAND_SLC_LPC32XX
|
||||
tristate "NXP LPC32xx SLC Controller"
|
||||
depends on ARCH_LPC32XX || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
|
||||
chips) NAND controller. This is the default for the PHYTEC 3250
|
||||
reference board which contains a NAND256R3A2CZA6 chip.
|
||||
|
||||
Please check the actual NAND chip connected and its support
|
||||
by the SLC NAND controller.
|
||||
|
||||
config MTD_NAND_MLC_LPC32XX
|
||||
tristate "NXP LPC32xx MLC Controller"
|
||||
depends on ARCH_LPC32XX || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
|
||||
controller. This is the default for the WORK92105 controller
|
||||
board.
|
||||
|
||||
Please check the actual NAND chip connected and its support
|
||||
by the MLC NAND controller.
|
||||
|
||||
config MTD_NAND_CM_X270
|
||||
tristate "Support for NAND Flash on CM-X270 modules"
|
||||
depends on MACH_ARMCORE
|
||||
|
||||
config MTD_NAND_PASEMI
|
||||
tristate "NAND support for PA Semi PWRficient"
|
||||
depends on PPC_PASEMI
|
||||
help
|
||||
Enables support for NAND Flash interface on PA Semi PWRficient
|
||||
based boards
|
||||
|
||||
config MTD_NAND_TMIO
|
||||
tristate "NAND Flash device on Toshiba Mobile IO Controller"
|
||||
depends on MFD_TMIO
|
||||
help
|
||||
Support for NAND flash connected to a Toshiba Mobile IO
|
||||
Controller in some PDAs, including the Sharp SL6000x.
|
||||
|
||||
config MTD_NAND_NANDSIM
|
||||
tristate "Support for NAND Flash Simulator"
|
||||
help
|
||||
The simulator may simulate various NAND flash chips for the
|
||||
MTD nand layer.
|
||||
|
||||
config MTD_NAND_GPMI_NAND
|
||||
tristate "GPMI NAND Flash Controller driver"
|
||||
depends on MXS_DMA
|
||||
help
|
||||
Enables NAND Flash support for IMX23, IMX28 or IMX6.
|
||||
The GPMI controller is very powerful, with the help of BCH
|
||||
module, it can do the hardware ECC. The GPMI supports several
|
||||
NAND flashs at the same time.
|
||||
|
||||
config MTD_NAND_BRCMNAND
|
||||
tristate "Broadcom STB NAND controller"
|
||||
depends on ARM || ARM64 || MIPS || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables the Broadcom NAND controller driver. The controller was
|
||||
originally designed for Set-Top Box but is used on various BCM7xxx,
|
||||
BCM3xxx, BCM63xxx, iProc/Cygnus and more.
|
||||
|
||||
config MTD_NAND_BCM47XXNFLASH
|
||||
tristate "Support for NAND flash on BCM4706 BCMA bus"
|
||||
depends on BCMA_NFLASH
|
||||
depends on BCMA
|
||||
help
|
||||
BCMA bus can have various flash memories attached, they are
|
||||
registered by bcma as platform devices. This enables driver for
|
||||
NAND flash memories. For now only BCM4706 is supported.
|
||||
|
||||
config MTD_NAND_PLATFORM
|
||||
tristate "Support for generic platform NAND driver"
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This implements a generic NAND driver for on-SOC platform
|
||||
devices. You will need to provide platform-specific functions
|
||||
via platform_data.
|
||||
|
||||
config MTD_NAND_ORION
|
||||
tristate "NAND Flash support for Marvell Orion SoC"
|
||||
depends on PLAT_ORION
|
||||
help
|
||||
This enables the NAND flash controller on Orion machines.
|
||||
|
||||
No board specific support is done by this driver, each board
|
||||
must advertise a platform_device for the driver to attach.
|
||||
|
||||
config MTD_NAND_OXNAS
|
||||
tristate "NAND Flash support for Oxford Semiconductor SoC"
|
||||
depends on ARCH_OXNAS || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the NAND flash controller on Oxford Semiconductor SoCs.
|
||||
|
||||
config MTD_NAND_FSL_ELBC
|
||||
tristate "NAND support for Freescale eLBC controllers"
|
||||
depends on FSL_SOC
|
||||
select FSL_LBC
|
||||
help
|
||||
Various Freescale chips, including the 8313, include a NAND Flash
|
||||
Controller Module with built-in hardware ECC capabilities.
|
||||
Enabling this option will enable you to use this to control
|
||||
external NAND devices.
|
||||
|
||||
config MTD_NAND_FSL_IFC
|
||||
tristate "NAND support for Freescale IFC controller"
|
||||
depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
select FSL_IFC
|
||||
select MEMORY
|
||||
help
|
||||
Various Freescale chips e.g P1010, include a NAND Flash machine
|
||||
with built-in hardware ECC capabilities.
|
||||
Enabling this option will enable you to use this to control
|
||||
external NAND devices.
|
||||
|
||||
config MTD_NAND_FSL_UPM
|
||||
tristate "Support for NAND on Freescale UPM"
|
||||
depends on PPC_83xx || PPC_85xx
|
||||
select FSL_LBC
|
||||
help
|
||||
Enables support for NAND Flash chips wired onto Freescale PowerPC
|
||||
processor localbus with User-Programmable Machine support.
|
||||
|
||||
config MTD_NAND_MPC5121_NFC
|
||||
tristate "MPC5121 built-in NAND Flash Controller support"
|
||||
depends on PPC_MPC512x
|
||||
help
|
||||
This enables the driver for the NAND flash controller on the
|
||||
MPC5121 SoC.
|
||||
|
||||
config MTD_NAND_VF610_NFC
|
||||
tristate "Support for Freescale NFC for VF610/MPC5125"
|
||||
depends on (SOC_VF610 || COMPILE_TEST)
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND Flash Controller on some Freescale
|
||||
processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
|
||||
The driver supports a maximum 2k page size. With 2k pages and
|
||||
64 bytes or more of OOB, hardware ECC with up to 32-bit error
|
||||
correction is supported. Hardware ECC is only enabled through
|
||||
device tree.
|
||||
|
||||
config MTD_NAND_MXC
|
||||
tristate "MXC NAND support"
|
||||
depends on ARCH_MXC || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the driver for the NAND flash controller on the
|
||||
MXC processors.
|
||||
|
||||
config MTD_NAND_SH_FLCTL
|
||||
tristate "Support for NAND on Renesas SuperH FLCTL"
|
||||
depends on SUPERH || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Several Renesas SuperH CPU has FLCTL. This option enables support
|
||||
for NAND Flash using FLCTL.
|
||||
|
||||
config MTD_NAND_DAVINCI
|
||||
tristate "Support NAND on DaVinci/Keystone SoC"
|
||||
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enable the driver for NAND flash chips on Texas Instruments
|
||||
DaVinci/Keystone processors.
|
||||
|
||||
config MTD_NAND_TXX9NDFMC
|
||||
tristate "NAND Flash support for TXx9 SoC"
|
||||
depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the NAND flash controller on the TXx9 SoCs.
|
||||
|
||||
config MTD_NAND_SOCRATES
|
||||
tristate "Support for NAND on Socrates board"
|
||||
depends on SOCRATES
|
||||
help
|
||||
Enables support for NAND Flash chips wired onto Socrates board.
|
||||
|
||||
config MTD_NAND_NUC900
|
||||
tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
|
||||
depends on ARCH_W90X900 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
This enables the driver for the NAND Flash on evaluation board based
|
||||
on w90p910 / NUC9xx.
|
||||
|
||||
source "drivers/mtd/nand/raw/ingenic/Kconfig"
|
||||
|
||||
config MTD_NAND_FSMC
|
||||
tristate "Support for NAND on ST Micros FSMC"
|
||||
depends on OF && HAS_IOMEM
|
||||
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 || \
|
||||
COMPILE_TEST
|
||||
help
|
||||
Enables support for NAND Flash chips on the ST Microelectronics
|
||||
Flexible Static Memory Controller (FSMC)
|
||||
|
||||
config MTD_NAND_XWAY
|
||||
bool "Support for NAND on Lantiq XWAY SoC"
|
||||
depends on LANTIQ && SOC_TYPE_XWAY
|
||||
help
|
||||
Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
|
||||
to the External Bus Unit (EBU).
|
||||
|
||||
config MTD_NAND_SUNXI
|
||||
tristate "Support for NAND on Allwinner SoCs"
|
||||
depends on ARCH_SUNXI || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND Flash chips on Allwinner SoCs.
|
||||
|
||||
config MTD_NAND_HISI504
|
||||
tristate "Support for NAND controller on Hisilicon SoC Hip04"
|
||||
depends on ARCH_HISI || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND controller on Hisilicon SoC Hip04.
|
||||
|
||||
config MTD_NAND_QCOM
|
||||
tristate "Support for NAND on QCOM SoCs"
|
||||
depends on ARCH_QCOM || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
|
||||
controller. This controller is found on IPQ806x SoC.
|
||||
|
||||
config MTD_NAND_MTK
|
||||
tristate "Support for NAND controller on MTK SoCs"
|
||||
depends on ARCH_MEDIATEK || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND controller on MTK SoCs.
|
||||
This controller is found on mt27xx, mt81xx, mt65xx SoCs.
|
||||
|
||||
config MTD_NAND_TEGRA
|
||||
tristate "Support for NAND controller on NVIDIA Tegra"
|
||||
depends on ARCH_TEGRA || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND flash controller on NVIDIA Tegra SoC.
|
||||
The driver has been developed and tested on a Tegra 2 SoC. DMA
|
||||
support, raw read/write page as well as HW ECC read/write page
|
||||
is supported. Extra OOB bytes when using HW ECC are currently
|
||||
not supported.
|
||||
|
||||
config MTD_NAND_STM32_FMC2
|
||||
tristate "Support for NAND controller on STM32MP SoCs"
|
||||
depends on MACH_STM32MP157 || COMPILE_TEST
|
||||
help
|
||||
Enables support for NAND Flash chips on SoCs containing the FMC2
|
||||
NAND controller. This controller is found on STM32MP SoCs.
|
||||
The controller supports a maximum 8k page size and supports
|
||||
a maximum 8-bit correction error per sector of 512 bytes.
|
||||
|
||||
config MTD_NAND_MESON
|
||||
tristate "Support for NAND controller on Amlogic's Meson SoCs"
|
||||
depends on ARCH_MESON || COMPILE_TEST
|
||||
select MFD_SYSCON
|
||||
help
|
||||
Enables support for NAND controller on Amlogic's Meson SoCs.
|
||||
This controller is found on Meson SoCs.
|
||||
|
||||
endif # MTD_NAND
|
||||
|
|
|
|||
|
|
@ -1,12 +1,12 @@
|
|||
config MTD_NAND_JZ4740
|
||||
tristate "Support for JZ4740 SoC NAND controller"
|
||||
tristate "JZ4740 NAND controller"
|
||||
depends on MACH_JZ4740 || COMPILE_TEST
|
||||
depends on HAS_IOMEM
|
||||
help
|
||||
Enables support for NAND Flash on JZ4740 SoC based boards.
|
||||
|
||||
config MTD_NAND_JZ4780
|
||||
tristate "Support for NAND on JZ4780 SoC"
|
||||
tristate "JZ4780 NAND controller"
|
||||
depends on JZ4780_NEMC
|
||||
help
|
||||
Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
|
||||
|
|
|
|||
Loading…
Reference in New Issue